diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/media/dvb-frontends/ves1x93.c | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/media/dvb-frontends/ves1x93.c')
-rw-r--r-- | drivers/media/dvb-frontends/ves1x93.c | 543 |
1 files changed, 543 insertions, 0 deletions
diff --git a/drivers/media/dvb-frontends/ves1x93.c b/drivers/media/dvb-frontends/ves1x93.c new file mode 100644 index 000000000..c60e21d26 --- /dev/null +++ b/drivers/media/dvb-frontends/ves1x93.c @@ -0,0 +1,543 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + Driver for VES1893 and VES1993 QPSK Demodulators + + Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de> + Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de> + Copyright (C) 2002 Dennis Noermann <dennis.noermann@noernet.de> + Copyright (C) 2002-2003 Andreas Oberritter <obi@linuxtv.org> + + +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <media/dvb_frontend.h> +#include "ves1x93.h" + + +struct ves1x93_state { + struct i2c_adapter* i2c; + /* configuration settings */ + const struct ves1x93_config* config; + struct dvb_frontend frontend; + + /* previous uncorrected block counter */ + enum fe_spectral_inversion inversion; + u8 *init_1x93_tab; + u8 *init_1x93_wtab; + u8 tab_size; + u8 demod_type; + u32 frequency; +}; + +static int debug; +#define dprintk if (debug) printk + +#define DEMOD_VES1893 0 +#define DEMOD_VES1993 1 + +static u8 init_1893_tab [] = { + 0x01, 0xa4, 0x35, 0x80, 0x2a, 0x0b, 0x55, 0xc4, + 0x09, 0x69, 0x00, 0x86, 0x4c, 0x28, 0x7f, 0x00, + 0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xdc, 0x00, + 0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x55, 0x00, 0x00, 0x7f, 0x00 +}; + +static u8 init_1993_tab [] = { + 0x00, 0x9c, 0x35, 0x80, 0x6a, 0x09, 0x72, 0x8c, + 0x09, 0x6b, 0x00, 0x00, 0x4c, 0x08, 0x00, 0x00, + 0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x40, 0x21, 0xb0, 0x00, 0x00, 0x00, 0x10, + 0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x55, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03, + 0x00, 0x00, 0x0e, 0x80, 0x00 +}; + +static u8 init_1893_wtab[] = +{ + 1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0, + 0,1,0,0,0,0,0,0, 1,0,1,1,0,0,0,1, + 1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0, + 1,1,1,0,1,1 +}; + +static u8 init_1993_wtab[] = +{ + 1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0, + 0,1,0,0,0,0,0,0, 1,1,1,1,0,0,0,1, + 1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0, + 1,1,1,0,1,1,1,1, 1,1,1,1,1 +}; + +static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data) +{ + u8 buf [] = { 0x00, reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 }; + int err; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +static u8 ves1x93_readreg (struct ves1x93_state* state, u8 reg) +{ + int ret; + u8 b0 [] = { 0x00, reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 }, + { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } }; + + ret = i2c_transfer (state->i2c, msg, 2); + + if (ret != 2) return ret; + + return b1[0]; +} + +static int ves1x93_clr_bit (struct ves1x93_state* state) +{ + msleep(10); + ves1x93_writereg (state, 0, state->init_1x93_tab[0] & 0xfe); + ves1x93_writereg (state, 0, state->init_1x93_tab[0]); + msleep(50); + return 0; +} + +static int ves1x93_set_inversion(struct ves1x93_state *state, + enum fe_spectral_inversion inversion) +{ + u8 val; + + /* + * inversion on/off are interchanged because i and q seem to + * be swapped on the hardware + */ + + switch (inversion) { + case INVERSION_OFF: + val = 0xc0; + break; + case INVERSION_ON: + val = 0x80; + break; + case INVERSION_AUTO: + val = 0x00; + break; + default: + return -EINVAL; + } + + return ves1x93_writereg (state, 0x0c, (state->init_1x93_tab[0x0c] & 0x3f) | val); +} + +static int ves1x93_set_fec(struct ves1x93_state *state, enum fe_code_rate fec) +{ + if (fec == FEC_AUTO) + return ves1x93_writereg (state, 0x0d, 0x08); + else if (fec < FEC_1_2 || fec > FEC_8_9) + return -EINVAL; + else + return ves1x93_writereg (state, 0x0d, fec - FEC_1_2); +} + +static enum fe_code_rate ves1x93_get_fec(struct ves1x93_state *state) +{ + return FEC_1_2 + ((ves1x93_readreg (state, 0x0d) >> 4) & 0x7); +} + +static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate) +{ + u32 BDR; + u32 ratio; + u8 ADCONF, FCONF, FNR, AGCR; + u32 BDRI; + u32 tmp; + u32 FIN; + + dprintk("%s: srate == %d\n", __func__, (unsigned int) srate); + + if (srate > state->config->xin/2) + srate = state->config->xin/2; + + if (srate < 500000) + srate = 500000; + +#define MUL (1UL<<26) + + FIN = (state->config->xin + 6000) >> 4; + + tmp = srate << 6; + ratio = tmp / FIN; + + tmp = (tmp % FIN) << 8; + ratio = (ratio << 8) + tmp / FIN; + + tmp = (tmp % FIN) << 8; + ratio = (ratio << 8) + tmp / FIN; + + FNR = 0xff; + + if (ratio < MUL/3) FNR = 0; + if (ratio < (MUL*11)/50) FNR = 1; + if (ratio < MUL/6) FNR = 2; + if (ratio < MUL/9) FNR = 3; + if (ratio < MUL/12) FNR = 4; + if (ratio < (MUL*11)/200) FNR = 5; + if (ratio < MUL/24) FNR = 6; + if (ratio < (MUL*27)/1000) FNR = 7; + if (ratio < MUL/48) FNR = 8; + if (ratio < (MUL*137)/10000) FNR = 9; + + if (FNR == 0xff) { + ADCONF = 0x89; + FCONF = 0x80; + FNR = 0; + } else { + ADCONF = 0x81; + FCONF = 0x88 | (FNR >> 1) | ((FNR & 0x01) << 5); + /*FCONF = 0x80 | ((FNR & 0x01) << 5) | (((FNR > 1) & 0x03) << 3) | ((FNR >> 1) & 0x07);*/ + } + + BDR = (( (ratio << (FNR >> 1)) >> 4) + 1) >> 1; + BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1; + + dprintk("FNR= %d\n", FNR); + dprintk("ratio= %08x\n", (unsigned int) ratio); + dprintk("BDR= %08x\n", (unsigned int) BDR); + dprintk("BDRI= %02x\n", (unsigned int) BDRI); + + if (BDRI > 0xff) + BDRI = 0xff; + + ves1x93_writereg (state, 0x06, 0xff & BDR); + ves1x93_writereg (state, 0x07, 0xff & (BDR >> 8)); + ves1x93_writereg (state, 0x08, 0x0f & (BDR >> 16)); + + ves1x93_writereg (state, 0x09, BDRI); + ves1x93_writereg (state, 0x20, ADCONF); + ves1x93_writereg (state, 0x21, FCONF); + + AGCR = state->init_1x93_tab[0x05]; + if (state->config->invert_pwm) + AGCR |= 0x20; + + if (srate < 6000000) + AGCR |= 0x80; + else + AGCR &= ~0x80; + + ves1x93_writereg (state, 0x05, AGCR); + + /* ves1993 hates this, will lose lock */ + if (state->demod_type != DEMOD_VES1993) + ves1x93_clr_bit (state); + + return 0; +} + +static int ves1x93_init (struct dvb_frontend* fe) +{ + struct ves1x93_state* state = fe->demodulator_priv; + int i; + int val; + + dprintk("%s: init chip\n", __func__); + + for (i = 0; i < state->tab_size; i++) { + if (state->init_1x93_wtab[i]) { + val = state->init_1x93_tab[i]; + + if (state->config->invert_pwm && (i == 0x05)) val |= 0x20; /* invert PWM */ + ves1x93_writereg (state, i, val); + } + } + + return 0; +} + +static int ves1x93_set_voltage(struct dvb_frontend *fe, + enum fe_sec_voltage voltage) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + switch (voltage) { + case SEC_VOLTAGE_13: + return ves1x93_writereg (state, 0x1f, 0x20); + case SEC_VOLTAGE_18: + return ves1x93_writereg (state, 0x1f, 0x30); + case SEC_VOLTAGE_OFF: + return ves1x93_writereg (state, 0x1f, 0x00); + default: + return -EINVAL; + } +} + +static int ves1x93_read_status(struct dvb_frontend *fe, + enum fe_status *status) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + u8 sync = ves1x93_readreg (state, 0x0e); + + /* + * The ves1893 sometimes returns sync values that make no sense, + * because, e.g., the SIGNAL bit is 0, while some of the higher + * bits are 1 (and how can there be a CARRIER w/o a SIGNAL?). + * Tests showed that the VITERBI and SYNC bits are returned + * reliably, while the SIGNAL and CARRIER bits ar sometimes wrong. + * If such a case occurs, we read the value again, until we get a + * valid value. + */ + int maxtry = 10; /* just for safety - let's not get stuck here */ + while ((sync & 0x03) != 0x03 && (sync & 0x0c) && maxtry--) { + msleep(10); + sync = ves1x93_readreg (state, 0x0e); + } + + *status = 0; + + if (sync & 1) + *status |= FE_HAS_SIGNAL; + + if (sync & 2) + *status |= FE_HAS_CARRIER; + + if (sync & 4) + *status |= FE_HAS_VITERBI; + + if (sync & 8) + *status |= FE_HAS_SYNC; + + if ((sync & 0x1f) == 0x1f) + *status |= FE_HAS_LOCK; + + return 0; +} + +static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + *ber = ves1x93_readreg (state, 0x15); + *ber |= (ves1x93_readreg (state, 0x16) << 8); + *ber |= ((ves1x93_readreg (state, 0x17) & 0x0F) << 16); + *ber *= 10; + + return 0; +} + +static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + u8 signal = ~ves1x93_readreg (state, 0x0b); + *strength = (signal << 8) | signal; + + return 0; +} + +static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + u8 _snr = ~ves1x93_readreg (state, 0x1c); + *snr = (_snr << 8) | _snr; + + return 0; +} + +static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + *ucblocks = ves1x93_readreg (state, 0x18) & 0x7f; + + if (*ucblocks == 0x7f) + *ucblocks = 0xffffffff; /* counter overflow... */ + + ves1x93_writereg (state, 0x18, 0x00); /* reset the counter */ + ves1x93_writereg (state, 0x18, 0x80); /* dto. */ + + return 0; +} + +static int ves1x93_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct ves1x93_state* state = fe->demodulator_priv; + + if (fe->ops.tuner_ops.set_params) { + fe->ops.tuner_ops.set_params(fe); + if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); + } + ves1x93_set_inversion (state, p->inversion); + ves1x93_set_fec(state, p->fec_inner); + ves1x93_set_symbolrate(state, p->symbol_rate); + state->inversion = p->inversion; + state->frequency = p->frequency; + + return 0; +} + +static int ves1x93_get_frontend(struct dvb_frontend *fe, + struct dtv_frontend_properties *p) +{ + struct ves1x93_state* state = fe->demodulator_priv; + int afc; + + afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2; + afc = (afc * (int)(p->symbol_rate/1000/8))/16; + + p->frequency = state->frequency - afc; + + /* + * inversion indicator is only valid + * if auto inversion was used + */ + if (state->inversion == INVERSION_AUTO) + p->inversion = (ves1x93_readreg (state, 0x0f) & 2) ? + INVERSION_OFF : INVERSION_ON; + p->fec_inner = ves1x93_get_fec(state); + /* XXX FIXME: timing offset !! */ + + return 0; +} + +static int ves1x93_sleep(struct dvb_frontend* fe) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + return ves1x93_writereg (state, 0x00, 0x08); +} + +static void ves1x93_release(struct dvb_frontend* fe) +{ + struct ves1x93_state* state = fe->demodulator_priv; + kfree(state); +} + +static int ves1x93_i2c_gate_ctrl(struct dvb_frontend* fe, int enable) +{ + struct ves1x93_state* state = fe->demodulator_priv; + + if (enable) { + return ves1x93_writereg(state, 0x00, 0x11); + } else { + return ves1x93_writereg(state, 0x00, 0x01); + } +} + +static const struct dvb_frontend_ops ves1x93_ops; + +struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, + struct i2c_adapter* i2c) +{ + struct ves1x93_state* state = NULL; + u8 identity; + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct ves1x93_state), GFP_KERNEL); + if (state == NULL) goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + state->inversion = INVERSION_OFF; + + /* check if the demod is there + identify it */ + identity = ves1x93_readreg(state, 0x1e); + switch (identity) { + case 0xdc: /* VES1893A rev1 */ + printk("ves1x93: Detected ves1893a rev1\n"); + state->demod_type = DEMOD_VES1893; + state->init_1x93_tab = init_1893_tab; + state->init_1x93_wtab = init_1893_wtab; + state->tab_size = sizeof(init_1893_tab); + break; + + case 0xdd: /* VES1893A rev2 */ + printk("ves1x93: Detected ves1893a rev2\n"); + state->demod_type = DEMOD_VES1893; + state->init_1x93_tab = init_1893_tab; + state->init_1x93_wtab = init_1893_wtab; + state->tab_size = sizeof(init_1893_tab); + break; + + case 0xde: /* VES1993 */ + printk("ves1x93: Detected ves1993\n"); + state->demod_type = DEMOD_VES1993; + state->init_1x93_tab = init_1993_tab; + state->init_1x93_wtab = init_1993_wtab; + state->tab_size = sizeof(init_1993_tab); + break; + + default: + goto error; + } + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &ves1x93_ops, sizeof(struct dvb_frontend_ops)); + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static const struct dvb_frontend_ops ves1x93_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "VLSI VES1x93 DVB-S", + .frequency_min_hz = 950 * MHz, + .frequency_max_hz = 2150 * MHz, + .frequency_stepsize_hz = 125 * kHz, + .frequency_tolerance_hz = 29500 * kHz, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + /* .symbol_rate_tolerance = ???,*/ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK + }, + + .release = ves1x93_release, + + .init = ves1x93_init, + .sleep = ves1x93_sleep, + .i2c_gate_ctrl = ves1x93_i2c_gate_ctrl, + + .set_frontend = ves1x93_set_frontend, + .get_frontend = ves1x93_get_frontend, + + .read_status = ves1x93_read_status, + .read_ber = ves1x93_read_ber, + .read_signal_strength = ves1x93_read_signal_strength, + .read_snr = ves1x93_read_snr, + .read_ucblocks = ves1x93_read_ucblocks, + + .set_voltage = ves1x93_set_voltage, +}; + +module_param(debug, int, 0644); + +MODULE_DESCRIPTION("VLSI VES1x93 DVB-S Demodulator driver"); +MODULE_AUTHOR("Ralph Metzler"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL_GPL(ves1x93_attach); |