Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 81 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb/cinergyT2.h b/drivers/media/usb/dvb-usb/cinergyT2.h
new file mode 100644
index 000000000..18905a0ec
--- /dev/null
+++ b/drivers/media/usb/dvb-usb/cinergyT2.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
+ *
+ * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
+ *
+ * Based on the dvb-usb-framework code and the
+ * original Terratec Cinergy T2 driver by:
+ *
+ * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
+ *                  Holger Waechtler <holger@qanu.de>
+ *
+ *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
+ */
+
+#ifndef _DVB_USB_CINERGYT2_H_
+#define _DVB_USB_CINERGYT2_H_
+
+#include <linux/usb/input.h>
+
+#define DVB_USB_LOG_PREFIX "cinergyT2"
+#include "dvb-usb.h"
+
+#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
+
+extern int dvb_usb_cinergyt2_debug;
+
+#define deb_info(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x001, args)
+#define deb_xfer(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x002, args)
+#define deb_pll(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x004, args)
+#define deb_ts(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x008, args)
+#define deb_err(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x010, args)
+#define deb_rc(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x020, args)
+#define deb_fw(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x040, args)
+#define deb_mem(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x080, args)
+#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug,  0x100, args)
+
+
+
+enum cinergyt2_ep1_cmd {
+	CINERGYT2_EP1_PID_TABLE_RESET		= 0x01,
+	CINERGYT2_EP1_PID_SETUP			= 0x02,
+	CINERGYT2_EP1_CONTROL_STREAM_TRANSFER	= 0x03,
+	CINERGYT2_EP1_SET_TUNER_PARAMETERS	= 0x04,
+	CINERGYT2_EP1_GET_TUNER_STATUS		= 0x05,
+	CINERGYT2_EP1_START_SCAN		= 0x06,
+	CINERGYT2_EP1_CONTINUE_SCAN		= 0x07,
+	CINERGYT2_EP1_GET_RC_EVENTS		= 0x08,
+	CINERGYT2_EP1_SLEEP_MODE		= 0x09,
+	CINERGYT2_EP1_GET_FIRMWARE_VERSION	= 0x0A
+};
+
+
+struct dvbt_get_status_msg {
+	uint32_t freq;
+	uint8_t bandwidth;
+	uint16_t tps;
+	uint8_t flags;
+	__le16 gain;
+	uint8_t snr;
+	__le32 viterbi_error_rate;
+	uint32_t rs_error_rate;
+	__le32 uncorrected_block_count;
+	uint8_t lock_bits;
+	uint8_t prev_lock_bits;
+} __attribute__((packed));
+
+
+struct dvbt_set_parameters_msg {
+	uint8_t cmd;
+	__le32 freq;
+	uint8_t bandwidth;
+	__le16 tps;
+	uint8_t flags;
+} __attribute__((packed));
+
+
+extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d);
+
+#endif /* _DVB_USB_CINERGYT2_H_ */
+