Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 1371 insertions, 0 deletions

diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig
new file mode 100644
index 000000000..e5c571fd2
--- /dev/null
+++ b/drivers/mux/Kconfig
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Multiplexer devices
+#
+
+config MULTIPLEXER
+	tristate
+
+menu "Multiplexer drivers"
+	depends on MULTIPLEXER
+
+config MUX_ADG792A
+	tristate "Analog Devices ADG792A/ADG792G Multiplexers"
+	depends on I2C
+	help
+	  ADG792A and ADG792G Wide Bandwidth Triple 4:1 Multiplexers
+
+	  The driver supports both operating the three multiplexers in
+	  parallel and operating them independently.
+
+	  To compile the driver as a module, choose M here: the module will
+	  be called mux-adg792a.
+
+config MUX_ADGS1408
+	tristate "Analog Devices ADGS1408/ADGS1409 Multiplexers"
+	depends on SPI
+	help
+	  ADGS1408 8:1 multiplexer and ADGS1409 double 4:1 multiplexer
+	  switches.
+
+	  To compile the driver as a module, choose M here: the module will
+	  be called mux-adgs1408.
+
+config MUX_GPIO
+	tristate "GPIO-controlled Multiplexer"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  GPIO-controlled Multiplexer controller.
+
+	  The driver builds a single multiplexer controller using a number
+	  of gpio pins. For N pins, there will be 2^N possible multiplexer
+	  states. The GPIO pins can be connected (by the hardware) to several
+	  multiplexers, which in that case will be operated in parallel.
+
+	  To compile the driver as a module, choose M here: the module will
+	  be called mux-gpio.
+
+config MUX_MMIO
+	tristate "MMIO/Regmap register bitfield-controlled Multiplexer"
+	depends on OF || COMPILE_TEST
+	help
+	  MMIO/Regmap register bitfield-controlled Multiplexer controller.
+
+	  The driver builds multiplexer controllers for bitfields in either
+	  a syscon register or a driver regmap register. For N bit wide
+	  bitfields, there will be 2^N possible multiplexer states.
+
+	  To compile the driver as a module, choose M here: the module will
+	  be called mux-mmio.
+
+endmenu
diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile
new file mode 100644
index 000000000..6e9fa47da
--- /dev/null
+++ b/drivers/mux/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for multiplexer devices.
+#
+
+mux-core-objs			:= core.o
+mux-adg792a-objs		:= adg792a.o
+mux-adgs1408-objs		:= adgs1408.o
+mux-gpio-objs			:= gpio.o
+mux-mmio-objs			:= mmio.o
+
+obj-$(CONFIG_MULTIPLEXER)	+= mux-core.o
+obj-$(CONFIG_MUX_ADG792A)	+= mux-adg792a.o
+obj-$(CONFIG_MUX_ADGS1408)	+= mux-adgs1408.o
+obj-$(CONFIG_MUX_GPIO)		+= mux-gpio.o
+obj-$(CONFIG_MUX_MMIO)		+= mux-mmio.o
diff --git a/drivers/mux/adg792a.c b/drivers/mux/adg792a.c
new file mode 100644
index 000000000..e8fc2fc1a
--- /dev/null
+++ b/drivers/mux/adg792a.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Multiplexer driver for Analog Devices ADG792A/G Triple 4:1 mux
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mux/driver.h>
+#include <linux/property.h>
+
+#define ADG792A_LDSW		BIT(0)
+#define ADG792A_RESETB		BIT(1)
+#define ADG792A_DISABLE(mux)	(0x50 | (mux))
+#define ADG792A_DISABLE_ALL	(0x5f)
+#define ADG792A_MUX(mux, state)	(0xc0 | (((mux) + 1) << 2) | (state))
+#define ADG792A_MUX_ALL(state)	(0xc0 | (state))
+
+static int adg792a_write_cmd(struct i2c_client *i2c, u8 cmd, int reset)
+{
+	u8 data = ADG792A_RESETB | ADG792A_LDSW;
+
+	/* ADG792A_RESETB is active low, the chip resets when it is zero. */
+	if (reset)
+		data &= ~ADG792A_RESETB;
+
+	return i2c_smbus_write_byte_data(i2c, cmd, data);
+}
+
+static int adg792a_set(struct mux_control *mux, int state)
+{
+	struct i2c_client *i2c = to_i2c_client(mux->chip->dev.parent);
+	u8 cmd;
+
+	if (mux->chip->controllers == 1) {
+		/* parallel mux controller operation */
+		if (state == MUX_IDLE_DISCONNECT)
+			cmd = ADG792A_DISABLE_ALL;
+		else
+			cmd = ADG792A_MUX_ALL(state);
+	} else {
+		unsigned int controller = mux_control_get_index(mux);
+
+		if (state == MUX_IDLE_DISCONNECT)
+			cmd = ADG792A_DISABLE(controller);
+		else
+			cmd = ADG792A_MUX(controller, state);
+	}
+
+	return adg792a_write_cmd(i2c, cmd, 0);
+}
+
+static const struct mux_control_ops adg792a_ops = {
+	.set = adg792a_set,
+};
+
+static int adg792a_probe(struct i2c_client *i2c)
+{
+	struct device *dev = &i2c->dev;
+	struct mux_chip *mux_chip;
+	s32 idle_state[3];
+	u32 cells;
+	int ret;
+	int i;
+
+	if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	ret = device_property_read_u32(dev, "#mux-control-cells", &cells);
+	if (ret < 0)
+		return ret;
+	if (cells >= 2)
+		return -EINVAL;
+
+	mux_chip = devm_mux_chip_alloc(dev, cells ? 3 : 1, 0);
+	if (IS_ERR(mux_chip))
+		return PTR_ERR(mux_chip);
+
+	mux_chip->ops = &adg792a_ops;
+
+	ret = adg792a_write_cmd(i2c, ADG792A_DISABLE_ALL, 1);
+	if (ret < 0)
+		return ret;
+
+	ret = device_property_read_u32_array(dev, "idle-state",
+					     (u32 *)idle_state,
+					     mux_chip->controllers);
+	if (ret < 0) {
+		idle_state[0] = MUX_IDLE_AS_IS;
+		idle_state[1] = MUX_IDLE_AS_IS;
+		idle_state[2] = MUX_IDLE_AS_IS;
+	}
+
+	for (i = 0; i < mux_chip->controllers; ++i) {
+		struct mux_control *mux = &mux_chip->mux[i];
+
+		mux->states = 4;
+
+		switch (idle_state[i]) {
+		case MUX_IDLE_DISCONNECT:
+		case MUX_IDLE_AS_IS:
+		case 0 ... 4:
+			mux->idle_state = idle_state[i];
+			break;
+		default:
+			dev_err(dev, "invalid idle-state %d\n", idle_state[i]);
+			return -EINVAL;
+		}
+	}
+
+	ret = devm_mux_chip_register(dev, mux_chip);
+	if (ret < 0)
+		return ret;
+
+	if (cells)
+		dev_info(dev, "3x single pole quadruple throw muxes registered\n");
+	else
+		dev_info(dev, "triple pole quadruple throw mux registered\n");
+
+	return 0;
+}
+
+static const struct i2c_device_id adg792a_id[] = {
+	{ .name = "adg792a", },
+	{ .name = "adg792g", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adg792a_id);
+
+static const struct of_device_id adg792a_of_match[] = {
+	{ .compatible = "adi,adg792a", },
+	{ .compatible = "adi,adg792g", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adg792a_of_match);
+
+static struct i2c_driver adg792a_driver = {
+	.driver		= {
+		.name		= "adg792a",
+		.of_match_table = of_match_ptr(adg792a_of_match),
+	},
+	.probe_new	= adg792a_probe,
+	.id_table	= adg792a_id,
+};
+module_i2c_driver(adg792a_driver);
+
+MODULE_DESCRIPTION("Analog Devices ADG792A/G Triple 4:1 mux driver");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mux/adgs1408.c b/drivers/mux/adgs1408.c
new file mode 100644
index 000000000..22ed051eb
--- /dev/null
+++ b/drivers/mux/adgs1408.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ADGS1408/ADGS1409 SPI MUX driver
+ *
+ * Copyright 2018 Analog Devices Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mux/driver.h>
+#include <linux/property.h>
+#include <linux/spi/spi.h>
+
+#define ADGS1408_SW_DATA       (0x01)
+#define ADGS1408_REG_READ(reg) ((reg) | 0x80)
+#define ADGS1408_DISABLE       (0x00)
+#define ADGS1408_MUX(state)    (((state) << 1) | 1)
+
+enum adgs1408_chip_id {
+	ADGS1408 = 1,
+	ADGS1409,
+};
+
+static int adgs1408_spi_reg_write(struct spi_device *spi,
+				  u8 reg_addr, u8 reg_data)
+{
+	u8 tx_buf[2];
+
+	tx_buf[0] = reg_addr;
+	tx_buf[1] = reg_data;
+
+	return spi_write_then_read(spi, tx_buf, sizeof(tx_buf), NULL, 0);
+}
+
+static int adgs1408_set(struct mux_control *mux, int state)
+{
+	struct spi_device *spi = to_spi_device(mux->chip->dev.parent);
+	u8 reg;
+
+	if (state == MUX_IDLE_DISCONNECT)
+		reg = ADGS1408_DISABLE;
+	else
+		reg = ADGS1408_MUX(state);
+
+	return adgs1408_spi_reg_write(spi, ADGS1408_SW_DATA, reg);
+}
+
+static const struct mux_control_ops adgs1408_ops = {
+	.set = adgs1408_set,
+};
+
+static int adgs1408_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	enum adgs1408_chip_id chip_id;
+	struct mux_chip *mux_chip;
+	struct mux_control *mux;
+	s32 idle_state;
+	int ret;
+
+	chip_id = (enum adgs1408_chip_id)device_get_match_data(dev);
+	if (!chip_id)
+		chip_id = spi_get_device_id(spi)->driver_data;
+
+	mux_chip = devm_mux_chip_alloc(dev, 1, 0);
+	if (IS_ERR(mux_chip))
+		return PTR_ERR(mux_chip);
+
+	mux_chip->ops = &adgs1408_ops;
+
+	ret = adgs1408_spi_reg_write(spi, ADGS1408_SW_DATA, ADGS1408_DISABLE);
+	if (ret < 0)
+		return ret;
+
+	ret = device_property_read_u32(dev, "idle-state", (u32 *)&idle_state);
+	if (ret < 0)
+		idle_state = MUX_IDLE_AS_IS;
+
+	mux = mux_chip->mux;
+
+	if (chip_id == ADGS1408)
+		mux->states = 8;
+	else
+		mux->states = 4;
+
+	switch (idle_state) {
+	case MUX_IDLE_DISCONNECT:
+	case MUX_IDLE_AS_IS:
+	case 0 ... 7:
+		/* adgs1409 supports only 4 states */
+		if (idle_state < mux->states) {
+			mux->idle_state = idle_state;
+			break;
+		}
+		fallthrough;
+	default:
+		dev_err(dev, "invalid idle-state %d\n", idle_state);
+		return -EINVAL;
+	}
+
+	return devm_mux_chip_register(dev, mux_chip);
+}
+
+static const struct spi_device_id adgs1408_spi_id[] = {
+	{ "adgs1408", ADGS1408 },
+	{ "adgs1409", ADGS1409 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, adgs1408_spi_id);
+
+static const struct of_device_id adgs1408_of_match[] = {
+	{ .compatible = "adi,adgs1408", .data = (void *)ADGS1408, },
+	{ .compatible = "adi,adgs1409", .data = (void *)ADGS1409, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adgs1408_of_match);
+
+static struct spi_driver adgs1408_driver = {
+	.driver = {
+		.name = "adgs1408",
+		.of_match_table = adgs1408_of_match,
+	},
+	.probe = adgs1408_probe,
+	.id_table = adgs1408_spi_id,
+};
+module_spi_driver(adgs1408_driver);
+
+MODULE_AUTHOR("Mircea Caprioru <mircea.caprioru@analog.com>");
+MODULE_DESCRIPTION("Analog Devices ADGS1408 MUX driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mux/core.c b/drivers/mux/core.c
new file mode 100644
index 000000000..49bedbe63
--- /dev/null
+++ b/drivers/mux/core.c
@@ -0,0 +1,762 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Multiplexer subsystem
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+#define pr_fmt(fmt) "mux-core: " fmt
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+#include <linux/mux/driver.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+/*
+ * The idle-as-is "state" is not an actual state that may be selected, it
+ * only implies that the state should not be changed. So, use that state
+ * as indication that the cached state of the multiplexer is unknown.
+ */
+#define MUX_CACHE_UNKNOWN MUX_IDLE_AS_IS
+
+/**
+ * struct mux_state -	Represents a mux controller state specific to a given
+ *			consumer.
+ * @mux:		Pointer to a mux controller.
+ * @state:		State of the mux to be selected.
+ *
+ * This structure is specific to the consumer that acquires it and has
+ * information specific to that consumer.
+ */
+struct mux_state {
+	struct mux_control *mux;
+	unsigned int state;
+};
+
+static struct class mux_class = {
+	.name = "mux",
+	.owner = THIS_MODULE,
+};
+
+static DEFINE_IDA(mux_ida);
+
+static int __init mux_init(void)
+{
+	ida_init(&mux_ida);
+	return class_register(&mux_class);
+}
+
+static void __exit mux_exit(void)
+{
+	class_unregister(&mux_class);
+	ida_destroy(&mux_ida);
+}
+
+static void mux_chip_release(struct device *dev)
+{
+	struct mux_chip *mux_chip = to_mux_chip(dev);
+
+	ida_simple_remove(&mux_ida, mux_chip->id);
+	kfree(mux_chip);
+}
+
+static const struct device_type mux_type = {
+	.name = "mux-chip",
+	.release = mux_chip_release,
+};
+
+/**
+ * mux_chip_alloc() - Allocate a mux-chip.
+ * @dev: The parent device implementing the mux interface.
+ * @controllers: The number of mux controllers to allocate for this chip.
+ * @sizeof_priv: Size of extra memory area for private use by the caller.
+ *
+ * After allocating the mux-chip with the desired number of mux controllers
+ * but before registering the chip, the mux driver is required to configure
+ * the number of valid mux states in the mux_chip->mux[N].states members and
+ * the desired idle state in the returned mux_chip->mux[N].idle_state members.
+ * The default idle state is MUX_IDLE_AS_IS. The mux driver also needs to
+ * provide a pointer to the operations struct in the mux_chip->ops member
+ * before registering the mux-chip with mux_chip_register.
+ *
+ * Return: A pointer to the new mux-chip, or an ERR_PTR with a negative errno.
+ */
+struct mux_chip *mux_chip_alloc(struct device *dev,
+				unsigned int controllers, size_t sizeof_priv)
+{
+	struct mux_chip *mux_chip;
+	int i;
+
+	if (WARN_ON(!dev || !controllers))
+		return ERR_PTR(-EINVAL);
+
+	mux_chip = kzalloc(sizeof(*mux_chip) +
+			   controllers * sizeof(*mux_chip->mux) +
+			   sizeof_priv, GFP_KERNEL);
+	if (!mux_chip)
+		return ERR_PTR(-ENOMEM);
+
+	mux_chip->mux = (struct mux_control *)(mux_chip + 1);
+	mux_chip->dev.class = &mux_class;
+	mux_chip->dev.type = &mux_type;
+	mux_chip->dev.parent = dev;
+	mux_chip->dev.of_node = dev->of_node;
+	dev_set_drvdata(&mux_chip->dev, mux_chip);
+
+	mux_chip->id = ida_simple_get(&mux_ida, 0, 0, GFP_KERNEL);
+	if (mux_chip->id < 0) {
+		int err = mux_chip->id;
+
+		pr_err("muxchipX failed to get a device id\n");
+		kfree(mux_chip);
+		return ERR_PTR(err);
+	}
+	dev_set_name(&mux_chip->dev, "muxchip%d", mux_chip->id);
+
+	mux_chip->controllers = controllers;
+	for (i = 0; i < controllers; ++i) {
+		struct mux_control *mux = &mux_chip->mux[i];
+
+		mux->chip = mux_chip;
+		sema_init(&mux->lock, 1);
+		mux->cached_state = MUX_CACHE_UNKNOWN;
+		mux->idle_state = MUX_IDLE_AS_IS;
+		mux->last_change = ktime_get();
+	}
+
+	device_initialize(&mux_chip->dev);
+
+	return mux_chip;
+}
+EXPORT_SYMBOL_GPL(mux_chip_alloc);
+
+static int mux_control_set(struct mux_control *mux, int state)
+{
+	int ret = mux->chip->ops->set(mux, state);
+
+	mux->cached_state = ret < 0 ? MUX_CACHE_UNKNOWN : state;
+	if (ret >= 0)
+		mux->last_change = ktime_get();
+
+	return ret;
+}
+
+/**
+ * mux_chip_register() - Register a mux-chip, thus readying the controllers
+ *			 for use.
+ * @mux_chip: The mux-chip to register.
+ *
+ * Do not retry registration of the same mux-chip on failure. You should
+ * instead put it away with mux_chip_free() and allocate a new one, if you
+ * for some reason would like to retry registration.
+ *
+ * Return: Zero on success or a negative errno on error.
+ */
+int mux_chip_register(struct mux_chip *mux_chip)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < mux_chip->controllers; ++i) {
+		struct mux_control *mux = &mux_chip->mux[i];
+
+		if (mux->idle_state == mux->cached_state)
+			continue;
+
+		ret = mux_control_set(mux, mux->idle_state);
+		if (ret < 0) {
+			dev_err(&mux_chip->dev, "unable to set idle state\n");
+			return ret;
+		}
+	}
+
+	ret = device_add(&mux_chip->dev);
+	if (ret < 0)
+		dev_err(&mux_chip->dev,
+			"device_add failed in %s: %d\n", __func__, ret);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mux_chip_register);
+
+/**
+ * mux_chip_unregister() - Take the mux-chip off-line.
+ * @mux_chip: The mux-chip to unregister.
+ *
+ * mux_chip_unregister() reverses the effects of mux_chip_register().
+ * But not completely, you should not try to call mux_chip_register()
+ * on a mux-chip that has been registered before.
+ */
+void mux_chip_unregister(struct mux_chip *mux_chip)
+{
+	device_del(&mux_chip->dev);
+}
+EXPORT_SYMBOL_GPL(mux_chip_unregister);
+
+/**
+ * mux_chip_free() - Free the mux-chip for good.
+ * @mux_chip: The mux-chip to free.
+ *
+ * mux_chip_free() reverses the effects of mux_chip_alloc().
+ */
+void mux_chip_free(struct mux_chip *mux_chip)
+{
+	if (!mux_chip)
+		return;
+
+	put_device(&mux_chip->dev);
+}
+EXPORT_SYMBOL_GPL(mux_chip_free);
+
+static void devm_mux_chip_release(struct device *dev, void *res)
+{
+	struct mux_chip *mux_chip = *(struct mux_chip **)res;
+
+	mux_chip_free(mux_chip);
+}
+
+/**
+ * devm_mux_chip_alloc() - Resource-managed version of mux_chip_alloc().
+ * @dev: The parent device implementing the mux interface.
+ * @controllers: The number of mux controllers to allocate for this chip.
+ * @sizeof_priv: Size of extra memory area for private use by the caller.
+ *
+ * See mux_chip_alloc() for more details.
+ *
+ * Return: A pointer to the new mux-chip, or an ERR_PTR with a negative errno.
+ */
+struct mux_chip *devm_mux_chip_alloc(struct device *dev,
+				     unsigned int controllers,
+				     size_t sizeof_priv)
+{
+	struct mux_chip **ptr, *mux_chip;
+
+	ptr = devres_alloc(devm_mux_chip_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	mux_chip = mux_chip_alloc(dev, controllers, sizeof_priv);
+	if (IS_ERR(mux_chip)) {
+		devres_free(ptr);
+		return mux_chip;
+	}
+
+	*ptr = mux_chip;
+	devres_add(dev, ptr);
+
+	return mux_chip;
+}
+EXPORT_SYMBOL_GPL(devm_mux_chip_alloc);
+
+static void devm_mux_chip_reg_release(struct device *dev, void *res)
+{
+	struct mux_chip *mux_chip = *(struct mux_chip **)res;
+
+	mux_chip_unregister(mux_chip);
+}
+
+/**
+ * devm_mux_chip_register() - Resource-managed version mux_chip_register().
+ * @dev: The parent device implementing the mux interface.
+ * @mux_chip: The mux-chip to register.
+ *
+ * See mux_chip_register() for more details.
+ *
+ * Return: Zero on success or a negative errno on error.
+ */
+int devm_mux_chip_register(struct device *dev,
+			   struct mux_chip *mux_chip)
+{
+	struct mux_chip **ptr;
+	int res;
+
+	ptr = devres_alloc(devm_mux_chip_reg_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return -ENOMEM;
+
+	res = mux_chip_register(mux_chip);
+	if (res) {
+		devres_free(ptr);
+		return res;
+	}
+
+	*ptr = mux_chip;
+	devres_add(dev, ptr);
+
+	return res;
+}
+EXPORT_SYMBOL_GPL(devm_mux_chip_register);
+
+/**
+ * mux_control_states() - Query the number of multiplexer states.
+ * @mux: The mux-control to query.
+ *
+ * Return: The number of multiplexer states.
+ */
+unsigned int mux_control_states(struct mux_control *mux)
+{
+	return mux->states;
+}
+EXPORT_SYMBOL_GPL(mux_control_states);
+
+/*
+ * The mux->lock must be down when calling this function.
+ */
+static int __mux_control_select(struct mux_control *mux, int state)
+{
+	int ret;
+
+	if (WARN_ON(state < 0 || state >= mux->states))
+		return -EINVAL;
+
+	if (mux->cached_state == state)
+		return 0;
+
+	ret = mux_control_set(mux, state);
+	if (ret >= 0)
+		return 0;
+
+	/* The mux update failed, try to revert if appropriate... */
+	if (mux->idle_state != MUX_IDLE_AS_IS)
+		mux_control_set(mux, mux->idle_state);
+
+	return ret;
+}
+
+static void mux_control_delay(struct mux_control *mux, unsigned int delay_us)
+{
+	ktime_t delayend;
+	s64 remaining;
+
+	if (!delay_us)
+		return;
+
+	delayend = ktime_add_us(mux->last_change, delay_us);
+	remaining = ktime_us_delta(delayend, ktime_get());
+	if (remaining > 0)
+		fsleep(remaining);
+}
+
+/**
+ * mux_control_select_delay() - Select the given multiplexer state.
+ * @mux: The mux-control to request a change of state from.
+ * @state: The new requested state.
+ * @delay_us: The time to delay (in microseconds) if the mux state is changed.
+ *
+ * On successfully selecting the mux-control state, it will be locked until
+ * there is a call to mux_control_deselect(). If the mux-control is already
+ * selected when mux_control_select() is called, the caller will be blocked
+ * until mux_control_deselect() or mux_state_deselect() is called (by someone
+ * else).
+ *
+ * Therefore, make sure to call mux_control_deselect() when the operation is
+ * complete and the mux-control is free for others to use, but do not call
+ * mux_control_deselect() if mux_control_select() fails.
+ *
+ * Return: 0 when the mux-control state has the requested state or a negative
+ * errno on error.
+ */
+int mux_control_select_delay(struct mux_control *mux, unsigned int state,
+			     unsigned int delay_us)
+{
+	int ret;
+
+	ret = down_killable(&mux->lock);
+	if (ret < 0)
+		return ret;
+
+	ret = __mux_control_select(mux, state);
+	if (ret >= 0)
+		mux_control_delay(mux, delay_us);
+
+	if (ret < 0)
+		up(&mux->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mux_control_select_delay);
+
+/**
+ * mux_state_select_delay() - Select the given multiplexer state.
+ * @mstate: The mux-state to select.
+ * @delay_us: The time to delay (in microseconds) if the mux state is changed.
+ *
+ * On successfully selecting the mux-state, its mux-control will be locked
+ * until there is a call to mux_state_deselect(). If the mux-control is already
+ * selected when mux_state_select() is called, the caller will be blocked
+ * until mux_state_deselect() or mux_control_deselect() is called (by someone
+ * else).
+ *
+ * Therefore, make sure to call mux_state_deselect() when the operation is
+ * complete and the mux-control is free for others to use, but do not call
+ * mux_state_deselect() if mux_state_select() fails.
+ *
+ * Return: 0 when the mux-state has been selected or a negative
+ * errno on error.
+ */
+int mux_state_select_delay(struct mux_state *mstate, unsigned int delay_us)
+{
+	return mux_control_select_delay(mstate->mux, mstate->state, delay_us);
+}
+EXPORT_SYMBOL_GPL(mux_state_select_delay);
+
+/**
+ * mux_control_try_select_delay() - Try to select the given multiplexer state.
+ * @mux: The mux-control to request a change of state from.
+ * @state: The new requested state.
+ * @delay_us: The time to delay (in microseconds) if the mux state is changed.
+ *
+ * On successfully selecting the mux-control state, it will be locked until
+ * mux_control_deselect() is called.
+ *
+ * Therefore, make sure to call mux_control_deselect() when the operation is
+ * complete and the mux-control is free for others to use, but do not call
+ * mux_control_deselect() if mux_control_try_select() fails.
+ *
+ * Return: 0 when the mux-control state has the requested state or a negative
+ * errno on error. Specifically -EBUSY if the mux-control is contended.
+ */
+int mux_control_try_select_delay(struct mux_control *mux, unsigned int state,
+				 unsigned int delay_us)
+{
+	int ret;
+
+	if (down_trylock(&mux->lock))
+		return -EBUSY;
+
+	ret = __mux_control_select(mux, state);
+	if (ret >= 0)
+		mux_control_delay(mux, delay_us);
+
+	if (ret < 0)
+		up(&mux->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mux_control_try_select_delay);
+
+/**
+ * mux_state_try_select_delay() - Try to select the given multiplexer state.
+ * @mstate: The mux-state to select.
+ * @delay_us: The time to delay (in microseconds) if the mux state is changed.
+ *
+ * On successfully selecting the mux-state, its mux-control will be locked
+ * until mux_state_deselect() is called.
+ *
+ * Therefore, make sure to call mux_state_deselect() when the operation is
+ * complete and the mux-control is free for others to use, but do not call
+ * mux_state_deselect() if mux_state_try_select() fails.
+ *
+ * Return: 0 when the mux-state has been selected or a negative errno on
+ * error. Specifically -EBUSY if the mux-control is contended.
+ */
+int mux_state_try_select_delay(struct mux_state *mstate, unsigned int delay_us)
+{
+	return mux_control_try_select_delay(mstate->mux, mstate->state, delay_us);
+}
+EXPORT_SYMBOL_GPL(mux_state_try_select_delay);
+
+/**
+ * mux_control_deselect() - Deselect the previously selected multiplexer state.
+ * @mux: The mux-control to deselect.
+ *
+ * It is required that a single call is made to mux_control_deselect() for
+ * each and every successful call made to either of mux_control_select() or
+ * mux_control_try_select().
+ *
+ * Return: 0 on success and a negative errno on error. An error can only
+ * occur if the mux has an idle state. Note that even if an error occurs, the
+ * mux-control is unlocked and is thus free for the next access.
+ */
+int mux_control_deselect(struct mux_control *mux)
+{
+	int ret = 0;
+
+	if (mux->idle_state != MUX_IDLE_AS_IS &&
+	    mux->idle_state != mux->cached_state)
+		ret = mux_control_set(mux, mux->idle_state);
+
+	up(&mux->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mux_control_deselect);
+
+/**
+ * mux_state_deselect() - Deselect the previously selected multiplexer state.
+ * @mstate: The mux-state to deselect.
+ *
+ * It is required that a single call is made to mux_state_deselect() for
+ * each and every successful call made to either of mux_state_select() or
+ * mux_state_try_select().
+ *
+ * Return: 0 on success and a negative errno on error. An error can only
+ * occur if the mux has an idle state. Note that even if an error occurs, the
+ * mux-control is unlocked and is thus free for the next access.
+ */
+int mux_state_deselect(struct mux_state *mstate)
+{
+	return mux_control_deselect(mstate->mux);
+}
+EXPORT_SYMBOL_GPL(mux_state_deselect);
+
+/* Note this function returns a reference to the mux_chip dev. */
+static struct mux_chip *of_find_mux_chip_by_node(struct device_node *np)
+{
+	struct device *dev;
+
+	dev = class_find_device_by_of_node(&mux_class, np);
+
+	return dev ? to_mux_chip(dev) : NULL;
+}
+
+/*
+ * mux_get() - Get the mux-control for a device.
+ * @dev: The device that needs a mux-control.
+ * @mux_name: The name identifying the mux-control.
+ * @state: Pointer to where the requested state is returned, or NULL when
+ *         the required multiplexer states are handled by other means.
+ *
+ * Return: A pointer to the mux-control, or an ERR_PTR with a negative errno.
+ */
+static struct mux_control *mux_get(struct device *dev, const char *mux_name,
+				   unsigned int *state)
+{
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args args;
+	struct mux_chip *mux_chip;
+	unsigned int controller;
+	int index = 0;
+	int ret;
+
+	if (mux_name) {
+		if (state)
+			index = of_property_match_string(np, "mux-state-names",
+							 mux_name);
+		else
+			index = of_property_match_string(np, "mux-control-names",
+							 mux_name);
+		if (index < 0) {
+			dev_err(dev, "mux controller '%s' not found\n",
+				mux_name);
+			return ERR_PTR(index);
+		}
+	}
+
+	if (state)
+		ret = of_parse_phandle_with_args(np,
+						 "mux-states", "#mux-state-cells",
+						 index, &args);
+	else
+		ret = of_parse_phandle_with_args(np,
+						 "mux-controls", "#mux-control-cells",
+						 index, &args);
+	if (ret) {
+		dev_err(dev, "%pOF: failed to get mux-%s %s(%i)\n",
+			np, state ? "state" : "control", mux_name ?: "", index);
+		return ERR_PTR(ret);
+	}
+
+	mux_chip = of_find_mux_chip_by_node(args.np);
+	of_node_put(args.np);
+	if (!mux_chip)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	controller = 0;
+	if (state) {
+		if (args.args_count > 2 || args.args_count == 0 ||
+		    (args.args_count < 2 && mux_chip->controllers > 1)) {
+			dev_err(dev, "%pOF: wrong #mux-state-cells for %pOF\n",
+				np, args.np);
+			put_device(&mux_chip->dev);
+			return ERR_PTR(-EINVAL);
+		}
+
+		if (args.args_count == 2) {
+			controller = args.args[0];
+			*state = args.args[1];
+		} else {
+			*state = args.args[0];
+		}
+
+	} else {
+		if (args.args_count > 1 ||
+		    (!args.args_count && mux_chip->controllers > 1)) {
+			dev_err(dev, "%pOF: wrong #mux-control-cells for %pOF\n",
+				np, args.np);
+			put_device(&mux_chip->dev);
+			return ERR_PTR(-EINVAL);
+		}
+
+		if (args.args_count)
+			controller = args.args[0];
+	}
+
+	if (controller >= mux_chip->controllers) {
+		dev_err(dev, "%pOF: bad mux controller %u specified in %pOF\n",
+			np, controller, args.np);
+		put_device(&mux_chip->dev);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return &mux_chip->mux[controller];
+}
+
+/**
+ * mux_control_get() - Get the mux-control for a device.
+ * @dev: The device that needs a mux-control.
+ * @mux_name: The name identifying the mux-control.
+ *
+ * Return: A pointer to the mux-control, or an ERR_PTR with a negative errno.
+ */
+struct mux_control *mux_control_get(struct device *dev, const char *mux_name)
+{
+	return mux_get(dev, mux_name, NULL);
+}
+EXPORT_SYMBOL_GPL(mux_control_get);
+
+/**
+ * mux_control_put() - Put away the mux-control for good.
+ * @mux: The mux-control to put away.
+ *
+ * mux_control_put() reverses the effects of mux_control_get().
+ */
+void mux_control_put(struct mux_control *mux)
+{
+	put_device(&mux->chip->dev);
+}
+EXPORT_SYMBOL_GPL(mux_control_put);
+
+static void devm_mux_control_release(struct device *dev, void *res)
+{
+	struct mux_control *mux = *(struct mux_control **)res;
+
+	mux_control_put(mux);
+}
+
+/**
+ * devm_mux_control_get() - Get the mux-control for a device, with resource
+ *			    management.
+ * @dev: The device that needs a mux-control.
+ * @mux_name: The name identifying the mux-control.
+ *
+ * Return: Pointer to the mux-control, or an ERR_PTR with a negative errno.
+ */
+struct mux_control *devm_mux_control_get(struct device *dev,
+					 const char *mux_name)
+{
+	struct mux_control **ptr, *mux;
+
+	ptr = devres_alloc(devm_mux_control_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	mux = mux_control_get(dev, mux_name);
+	if (IS_ERR(mux)) {
+		devres_free(ptr);
+		return mux;
+	}
+
+	*ptr = mux;
+	devres_add(dev, ptr);
+
+	return mux;
+}
+EXPORT_SYMBOL_GPL(devm_mux_control_get);
+
+/*
+ * mux_state_get() - Get the mux-state for a device.
+ * @dev: The device that needs a mux-state.
+ * @mux_name: The name identifying the mux-state.
+ *
+ * Return: A pointer to the mux-state, or an ERR_PTR with a negative errno.
+ */
+static struct mux_state *mux_state_get(struct device *dev, const char *mux_name)
+{
+	struct mux_state *mstate;
+
+	mstate = kzalloc(sizeof(*mstate), GFP_KERNEL);
+	if (!mstate)
+		return ERR_PTR(-ENOMEM);
+
+	mstate->mux = mux_get(dev, mux_name, &mstate->state);
+	if (IS_ERR(mstate->mux)) {
+		int err = PTR_ERR(mstate->mux);
+
+		kfree(mstate);
+		return ERR_PTR(err);
+	}
+
+	return mstate;
+}
+
+/*
+ * mux_state_put() - Put away the mux-state for good.
+ * @mstate: The mux-state to put away.
+ *
+ * mux_state_put() reverses the effects of mux_state_get().
+ */
+static void mux_state_put(struct mux_state *mstate)
+{
+	mux_control_put(mstate->mux);
+	kfree(mstate);
+}
+
+static void devm_mux_state_release(struct device *dev, void *res)
+{
+	struct mux_state *mstate = *(struct mux_state **)res;
+
+	mux_state_put(mstate);
+}
+
+/**
+ * devm_mux_state_get() - Get the mux-state for a device, with resource
+ *			  management.
+ * @dev: The device that needs a mux-control.
+ * @mux_name: The name identifying the mux-control.
+ *
+ * Return: Pointer to the mux-state, or an ERR_PTR with a negative errno.
+ */
+struct mux_state *devm_mux_state_get(struct device *dev,
+				     const char *mux_name)
+{
+	struct mux_state **ptr, *mstate;
+
+	ptr = devres_alloc(devm_mux_state_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	mstate = mux_state_get(dev, mux_name);
+	if (IS_ERR(mstate)) {
+		devres_free(ptr);
+		return mstate;
+	}
+
+	*ptr = mstate;
+	devres_add(dev, ptr);
+
+	return mstate;
+}
+EXPORT_SYMBOL_GPL(devm_mux_state_get);
+
+/*
+ * Using subsys_initcall instead of module_init here to try to ensure - for
+ * the non-modular case - that the subsystem is initialized when mux consumers
+ * and mux controllers start to use it.
+ * For the modular case, the ordering is ensured with module dependencies.
+ */
+subsys_initcall(mux_init);
+module_exit(mux_exit);
+
+MODULE_DESCRIPTION("Multiplexer subsystem");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mux/gpio.c b/drivers/mux/gpio.c
new file mode 100644
index 000000000..cc5f2c186
--- /dev/null
+++ b/drivers/mux/gpio.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * GPIO-controlled multiplexer driver
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+#include <linux/bitmap.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mux/driver.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+struct mux_gpio {
+	struct gpio_descs *gpios;
+};
+
+static int mux_gpio_set(struct mux_control *mux, int state)
+{
+	struct mux_gpio *mux_gpio = mux_chip_priv(mux->chip);
+	DECLARE_BITMAP(values, BITS_PER_TYPE(state));
+	u32 value = state;
+
+	bitmap_from_arr32(values, &value, BITS_PER_TYPE(value));
+
+	gpiod_set_array_value_cansleep(mux_gpio->gpios->ndescs,
+				       mux_gpio->gpios->desc,
+				       mux_gpio->gpios->info, values);
+
+	return 0;
+}
+
+static const struct mux_control_ops mux_gpio_ops = {
+	.set = mux_gpio_set,
+};
+
+static const struct of_device_id mux_gpio_dt_ids[] = {
+	{ .compatible = "gpio-mux", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mux_gpio_dt_ids);
+
+static int mux_gpio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mux_chip *mux_chip;
+	struct mux_gpio *mux_gpio;
+	int pins;
+	s32 idle_state;
+	int ret;
+
+	pins = gpiod_count(dev, "mux");
+	if (pins < 0)
+		return pins;
+
+	mux_chip = devm_mux_chip_alloc(dev, 1, sizeof(*mux_gpio));
+	if (IS_ERR(mux_chip))
+		return PTR_ERR(mux_chip);
+
+	mux_gpio = mux_chip_priv(mux_chip);
+	mux_chip->ops = &mux_gpio_ops;
+
+	mux_gpio->gpios = devm_gpiod_get_array(dev, "mux", GPIOD_OUT_LOW);
+	if (IS_ERR(mux_gpio->gpios))
+		return dev_err_probe(dev, PTR_ERR(mux_gpio->gpios),
+				     "failed to get gpios\n");
+	WARN_ON(pins != mux_gpio->gpios->ndescs);
+	mux_chip->mux->states = BIT(pins);
+
+	ret = device_property_read_u32(dev, "idle-state", (u32 *)&idle_state);
+	if (ret >= 0 && idle_state != MUX_IDLE_AS_IS) {
+		if (idle_state < 0 || idle_state >= mux_chip->mux->states) {
+			dev_err(dev, "invalid idle-state %u\n", idle_state);
+			return -EINVAL;
+		}
+
+		mux_chip->mux->idle_state = idle_state;
+	}
+
+	ret = devm_mux_chip_register(dev, mux_chip);
+	if (ret < 0)
+		return ret;
+
+	dev_info(dev, "%u-way mux-controller registered\n",
+		 mux_chip->mux->states);
+
+	return 0;
+}
+
+static struct platform_driver mux_gpio_driver = {
+	.driver = {
+		.name = "gpio-mux",
+		.of_match_table	= mux_gpio_dt_ids,
+	},
+	.probe = mux_gpio_probe,
+};
+module_platform_driver(mux_gpio_driver);
+
+MODULE_DESCRIPTION("GPIO-controlled multiplexer driver");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mux/mmio.c b/drivers/mux/mmio.c
new file mode 100644
index 000000000..44a7a0e88
--- /dev/null
+++ b/drivers/mux/mmio.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MMIO register bitfield-controlled multiplexer driver
+ *
+ * Copyright (C) 2017 Pengutronix, Philipp Zabel <kernel@pengutronix.de>
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mux/driver.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+static int mux_mmio_set(struct mux_control *mux, int state)
+{
+	struct regmap_field **fields = mux_chip_priv(mux->chip);
+
+	return regmap_field_write(fields[mux_control_get_index(mux)], state);
+}
+
+static const struct mux_control_ops mux_mmio_ops = {
+	.set = mux_mmio_set,
+};
+
+static const struct of_device_id mux_mmio_dt_ids[] = {
+	{ .compatible = "mmio-mux", },
+	{ .compatible = "reg-mux", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mux_mmio_dt_ids);
+
+static int mux_mmio_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct regmap_field **fields;
+	struct mux_chip *mux_chip;
+	struct regmap *regmap;
+	int num_fields;
+	int ret;
+	int i;
+
+	if (of_device_is_compatible(np, "mmio-mux"))
+		regmap = syscon_node_to_regmap(np->parent);
+	else
+		regmap = dev_get_regmap(dev->parent, NULL) ?: ERR_PTR(-ENODEV);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(dev, "failed to get regmap: %d\n", ret);
+		return ret;
+	}
+
+	ret = of_property_count_u32_elems(np, "mux-reg-masks");
+	if (ret == 0 || ret % 2)
+		ret = -EINVAL;
+	if (ret < 0) {
+		dev_err(dev, "mux-reg-masks property missing or invalid: %d\n",
+			ret);
+		return ret;
+	}
+	num_fields = ret / 2;
+
+	mux_chip = devm_mux_chip_alloc(dev, num_fields, num_fields *
+				       sizeof(*fields));
+	if (IS_ERR(mux_chip))
+		return PTR_ERR(mux_chip);
+
+	fields = mux_chip_priv(mux_chip);
+
+	for (i = 0; i < num_fields; i++) {
+		struct mux_control *mux = &mux_chip->mux[i];
+		struct reg_field field;
+		s32 idle_state = MUX_IDLE_AS_IS;
+		u32 reg, mask;
+		int bits;
+
+		ret = of_property_read_u32_index(np, "mux-reg-masks",
+						 2 * i, &reg);
+		if (!ret)
+			ret = of_property_read_u32_index(np, "mux-reg-masks",
+							 2 * i + 1, &mask);
+		if (ret < 0) {
+			dev_err(dev, "bitfield %d: failed to read mux-reg-masks property: %d\n",
+				i, ret);
+			return ret;
+		}
+
+		field.reg = reg;
+		field.msb = fls(mask) - 1;
+		field.lsb = ffs(mask) - 1;
+
+		if (mask != GENMASK(field.msb, field.lsb)) {
+			dev_err(dev, "bitfield %d: invalid mask 0x%x\n",
+				i, mask);
+			return -EINVAL;
+		}
+
+		fields[i] = devm_regmap_field_alloc(dev, regmap, field);
+		if (IS_ERR(fields[i])) {
+			ret = PTR_ERR(fields[i]);
+			dev_err(dev, "bitfield %d: failed allocate: %d\n",
+				i, ret);
+			return ret;
+		}
+
+		bits = 1 + field.msb - field.lsb;
+		mux->states = 1 << bits;
+
+		of_property_read_u32_index(np, "idle-states", i,
+					   (u32 *)&idle_state);
+		if (idle_state != MUX_IDLE_AS_IS) {
+			if (idle_state < 0 || idle_state >= mux->states) {
+				dev_err(dev, "bitfield: %d: out of range idle state %d\n",
+					i, idle_state);
+				return -EINVAL;
+			}
+
+			mux->idle_state = idle_state;
+		}
+	}
+
+	mux_chip->ops = &mux_mmio_ops;
+
+	return devm_mux_chip_register(dev, mux_chip);
+}
+
+static struct platform_driver mux_mmio_driver = {
+	.driver = {
+		.name = "mmio-mux",
+		.of_match_table	= of_match_ptr(mux_mmio_dt_ids),
+	},
+	.probe = mux_mmio_probe,
+};
+module_platform_driver(mux_mmio_driver);
+
+MODULE_DESCRIPTION("MMIO register bitfield-controlled multiplexer driver");
+MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
+MODULE_LICENSE("GPL v2");