Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 974 insertions, 0 deletions

diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c
new file mode 100644
index 000000000..5267e9dcd
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c589_cs.c
@@ -0,0 +1,974 @@
+/* ======================================================================
+ *
+ * A PCMCIA ethernet driver for the 3com 3c589 card.
+ *
+ * Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
+ *
+ * 3c589_cs.c 1.162 2001/10/13 00:08:50
+ *
+ * The network driver code is based on Donald Becker's 3c589 code:
+ *
+ * Written 1994 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency.  This software may be used and
+ * distributed according to the terms of the GNU General Public License,
+ * incorporated herein by reference.
+ * Donald Becker may be reached at becker@scyld.com
+ *
+ * Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk>
+ *
+ * ======================================================================
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME	"3c589_cs"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+
+/* To minimize the size of the driver source I only define operating
+ * constants if they are used several times. You'll need the manual
+ * if you want to understand driver details.
+ */
+
+/* Offsets from base I/O address. */
+#define EL3_DATA	0x00
+#define EL3_TIMER	0x0a
+#define EL3_CMD		0x0e
+#define EL3_STATUS	0x0e
+
+#define EEPROM_READ	0x0080
+#define EEPROM_BUSY	0x8000
+
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+
+/* The top five bits written to EL3_CMD are a command, the lower
+ * 11 bits are the parameter, if applicable.
+ */
+
+enum c509cmd {
+	TotalReset	= 0<<11,
+	SelectWindow	= 1<<11,
+	StartCoax	= 2<<11,
+	RxDisable	= 3<<11,
+	RxEnable	= 4<<11,
+	RxReset		= 5<<11,
+	RxDiscard	= 8<<11,
+	TxEnable	= 9<<11,
+	TxDisable	= 10<<11,
+	TxReset		= 11<<11,
+	FakeIntr	= 12<<11,
+	AckIntr		= 13<<11,
+	SetIntrEnb	= 14<<11,
+	SetStatusEnb	= 15<<11,
+	SetRxFilter	= 16<<11,
+	SetRxThreshold	= 17<<11,
+	SetTxThreshold	= 18<<11,
+	SetTxStart	= 19<<11,
+	StatsEnable	= 21<<11,
+	StatsDisable	= 22<<11,
+	StopCoax	= 23<<11
+};
+
+enum c509status {
+	IntLatch	= 0x0001,
+	AdapterFailure	= 0x0002,
+	TxComplete	= 0x0004,
+	TxAvailable	= 0x0008,
+	RxComplete	= 0x0010,
+	RxEarly		= 0x0020,
+	IntReq		= 0x0040,
+	StatsFull	= 0x0080,
+	CmdBusy		= 0x1000
+};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+	RxStation	= 1,
+	RxMulticast	= 2,
+	RxBroadcast	= 4,
+	RxProm		= 8
+};
+
+/* Register window 1 offsets, the window used in normal operation. */
+#define TX_FIFO		0x00
+#define RX_FIFO		0x00
+#define RX_STATUS	0x08
+#define TX_STATUS	0x0B
+#define TX_FREE		0x0C	/* Remaining free bytes in Tx buffer. */
+
+#define WN0_IRQ		0x08	/* Window 0: Set IRQ line in bits 12-15. */
+#define WN4_MEDIA	0x0A	/* Window 4: Various transcvr/media bits. */
+#define MEDIA_TP	0x00C0	/* Enable link beat and jabber for 10baseT. */
+#define MEDIA_LED	0x0001	/* Enable link light on 3C589E cards. */
+
+/* Time in jiffies before concluding Tx hung */
+#define TX_TIMEOUT	((400*HZ)/1000)
+
+struct el3_private {
+	struct pcmcia_device	*p_dev;
+	/* For transceiver monitoring */
+	struct timer_list	media;
+	u16			media_status;
+	u16			fast_poll;
+	unsigned long		last_irq;
+	spinlock_t		lock;
+};
+
+static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
+MODULE_DESCRIPTION("3Com 3c589 series PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/* Special hook for setting if_port when module is loaded */
+INT_MODULE_PARM(if_port, 0);
+
+
+/*====================================================================*/
+
+static int tc589_config(struct pcmcia_device *link);
+static void tc589_release(struct pcmcia_device *link);
+
+static u16 read_eeprom(unsigned int ioaddr, int index);
+static void tc589_reset(struct net_device *dev);
+static void media_check(struct timer_list *t);
+static int el3_config(struct net_device *dev, struct ifmap *map);
+static int el3_open(struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+					struct net_device *dev);
+static irqreturn_t el3_interrupt(int irq, void *dev_id);
+static void update_stats(struct net_device *dev);
+static struct net_device_stats *el3_get_stats(struct net_device *dev);
+static int el3_rx(struct net_device *dev);
+static int el3_close(struct net_device *dev);
+static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue);
+static void set_rx_mode(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static const struct ethtool_ops netdev_ethtool_ops;
+
+static void tc589_detach(struct pcmcia_device *p_dev);
+
+static const struct net_device_ops el3_netdev_ops = {
+	.ndo_open		= el3_open,
+	.ndo_stop		= el3_close,
+	.ndo_start_xmit		= el3_start_xmit,
+	.ndo_tx_timeout		= el3_tx_timeout,
+	.ndo_set_config		= el3_config,
+	.ndo_get_stats		= el3_get_stats,
+	.ndo_set_rx_mode	= set_multicast_list,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int tc589_probe(struct pcmcia_device *link)
+{
+	struct el3_private *lp;
+	struct net_device *dev;
+	int ret;
+
+	dev_dbg(&link->dev, "3c589_attach()\n");
+
+	/* Create new ethernet device */
+	dev = alloc_etherdev(sizeof(struct el3_private));
+	if (!dev)
+		return -ENOMEM;
+	lp = netdev_priv(dev);
+	link->priv = dev;
+	lp->p_dev = link;
+
+	spin_lock_init(&lp->lock);
+	link->resource[0]->end = 16;
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+
+	link->config_flags |= CONF_ENABLE_IRQ;
+	link->config_index = 1;
+
+	dev->netdev_ops = &el3_netdev_ops;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	dev->ethtool_ops = &netdev_ethtool_ops;
+
+	ret = tc589_config(link);
+	if (ret)
+		goto err_free_netdev;
+
+	return 0;
+
+err_free_netdev:
+	free_netdev(dev);
+	return ret;
+}
+
+static void tc589_detach(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	dev_dbg(&link->dev, "3c589_detach\n");
+
+	unregister_netdev(dev);
+
+	tc589_release(link);
+
+	free_netdev(dev);
+} /* tc589_detach */
+
+static int tc589_config(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+	int ret, i, j, multi = 0, fifo;
+	__be16 addr[ETH_ALEN / 2];
+	unsigned int ioaddr;
+	static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+	u8 *buf;
+	size_t len;
+
+	dev_dbg(&link->dev, "3c589_config\n");
+
+	/* Is this a 3c562? */
+	if (link->manf_id != MANFID_3COM)
+		dev_info(&link->dev, "hmmm, is this really a 3Com card??\n");
+	multi = (link->card_id == PRODID_3COM_3C562);
+
+	link->io_lines = 16;
+
+	/* For the 3c562, the base address must be xx00-xx7f */
+	for (i = j = 0; j < 0x400; j += 0x10) {
+		if (multi && (j & 0x80))
+			continue;
+		link->resource[0]->start = j ^ 0x300;
+		i = pcmcia_request_io(link);
+		if (i == 0)
+			break;
+	}
+	if (i != 0)
+		goto failed;
+
+	ret = pcmcia_request_irq(link, el3_interrupt);
+	if (ret)
+		goto failed;
+
+	ret = pcmcia_enable_device(link);
+	if (ret)
+		goto failed;
+
+	dev->irq = link->irq;
+	dev->base_addr = link->resource[0]->start;
+	ioaddr = dev->base_addr;
+	EL3WINDOW(0);
+
+	/* The 3c589 has an extra EEPROM for configuration info, including
+	 * the hardware address.  The 3c562 puts the address in the CIS.
+	 */
+	len = pcmcia_get_tuple(link, 0x88, &buf);
+	if (buf && len >= 6) {
+		for (i = 0; i < 3; i++)
+			addr[i] = htons(le16_to_cpu(buf[i*2]));
+		kfree(buf);
+	} else {
+		kfree(buf); /* 0 < len < 6 */
+		for (i = 0; i < 3; i++)
+			addr[i] = htons(read_eeprom(ioaddr, i));
+		if (addr[0] == htons(0x6060)) {
+			dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n",
+					dev->base_addr, dev->base_addr+15);
+			goto failed;
+		}
+	}
+	eth_hw_addr_set(dev, (u8 *)addr);
+
+	/* The address and resource configuration register aren't loaded from
+	 * the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version.
+	 */
+
+	outw(0x3f00, ioaddr + 8);
+	fifo = inl(ioaddr);
+
+	/* The if_port symbol can be set when the module is loaded */
+	if ((if_port >= 0) && (if_port <= 3))
+		dev->if_port = if_port;
+	else
+		dev_err(&link->dev, "invalid if_port requested\n");
+
+	SET_NETDEV_DEV(dev, &link->dev);
+
+	if (register_netdev(dev) != 0) {
+		dev_err(&link->dev, "register_netdev() failed\n");
+		goto failed;
+	}
+
+	netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n",
+			(multi ? "562" : "589"), dev->base_addr, dev->irq,
+			dev->dev_addr);
+	netdev_info(dev, "  %dK FIFO split %s Rx:Tx, %s xcvr\n",
+			(fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
+			if_names[dev->if_port]);
+	return 0;
+
+failed:
+	tc589_release(link);
+	return -ENODEV;
+} /* tc589_config */
+
+static void tc589_release(struct pcmcia_device *link)
+{
+	pcmcia_disable_device(link);
+}
+
+static int tc589_suspend(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open)
+		netif_device_detach(dev);
+
+	return 0;
+}
+
+static int tc589_resume(struct pcmcia_device *link)
+{
+	struct net_device *dev = link->priv;
+
+	if (link->open) {
+		tc589_reset(dev);
+		netif_device_attach(dev);
+	}
+
+	return 0;
+}
+
+/*====================================================================*/
+
+/* Use this for commands that may take time to finish */
+
+static void tc589_wait_for_completion(struct net_device *dev, int cmd)
+{
+	int i = 100;
+	outw(cmd, dev->base_addr + EL3_CMD);
+	while (--i > 0)
+		if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000))
+			break;
+	if (i == 0)
+		netdev_warn(dev, "command 0x%04x did not complete!\n", cmd);
+}
+
+/* Read a word from the EEPROM using the regular EEPROM access register.
+ * Assume that we are in register window zero.
+ */
+
+static u16 read_eeprom(unsigned int ioaddr, int index)
+{
+	int i;
+	outw(EEPROM_READ + index, ioaddr + 10);
+	/* Reading the eeprom takes 162 us */
+	for (i = 1620; i >= 0; i--)
+		if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
+			break;
+	return inw(ioaddr + 12);
+}
+
+/* Set transceiver type, perhaps to something other than what the user
+ * specified in dev->if_port.
+ */
+
+static void tc589_set_xcvr(struct net_device *dev, int if_port)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned int ioaddr = dev->base_addr;
+
+	EL3WINDOW(0);
+	switch (if_port) {
+	case 0:
+	case 1:
+		outw(0, ioaddr + 6);
+		break;
+	case 2:
+		outw(3<<14, ioaddr + 6);
+		break;
+	case 3:
+		outw(1<<14, ioaddr + 6);
+		break;
+	}
+	/* On PCMCIA, this just turns on the LED */
+	outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD);
+	/* 10baseT interface, enable link beat and jabber check. */
+	EL3WINDOW(4);
+	outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA);
+	EL3WINDOW(1);
+	if (if_port == 2)
+		lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000);
+	else
+		lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800);
+}
+
+static void dump_status(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	EL3WINDOW(1);
+	netdev_info(dev, "  irq status %04x, rx status %04x, tx status %02x  tx free %04x\n",
+			inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS),
+			inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE));
+	EL3WINDOW(4);
+	netdev_info(dev, "  diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
+			inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08),
+			inw(ioaddr+0x0a));
+	EL3WINDOW(1);
+}
+
+/* Reset and restore all of the 3c589 registers. */
+static void tc589_reset(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	int i;
+
+	EL3WINDOW(0);
+	outw(0x0001, ioaddr + 4);			/* Activate board. */
+	outw(0x3f00, ioaddr + 8);			/* Set the IRQ line. */
+
+	/* Set the station address in window 2. */
+	EL3WINDOW(2);
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + i);
+
+	tc589_set_xcvr(dev, dev->if_port);
+
+	/* Switch to the stats window, and clear all stats by reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	EL3WINDOW(6);
+	for (i = 0; i < 9; i++)
+		inb(ioaddr+i);
+	inw(ioaddr + 10);
+	inw(ioaddr + 12);
+
+	/* Switch to register set 1 for normal use. */
+	EL3WINDOW(1);
+
+	set_rx_mode(dev);
+	outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+	outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+	outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+	/* Allow status bits to be seen. */
+	outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+	/* Ack all pending events, and set active indicator mask. */
+	outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+	 ioaddr + EL3_CMD);
+	outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+	 | AdapterFailure, ioaddr + EL3_CMD);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	strscpy(info->driver, DRV_NAME, sizeof(info->driver));
+	snprintf(info->bus_info, sizeof(info->bus_info),
+		"PCMCIA 0x%lx", dev->base_addr);
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+};
+
+static int el3_config(struct net_device *dev, struct ifmap *map)
+{
+	if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
+		if (map->port <= 3) {
+			dev->if_port = map->port;
+			netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
+			tc589_set_xcvr(dev, dev->if_port);
+		} else {
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+static int el3_open(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	struct pcmcia_device *link = lp->p_dev;
+
+	if (!pcmcia_dev_present(link))
+		return -ENODEV;
+
+	link->open++;
+	netif_start_queue(dev);
+
+	tc589_reset(dev);
+	timer_setup(&lp->media, media_check, 0);
+	mod_timer(&lp->media, jiffies + HZ);
+
+	dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
+	  dev->name, inw(dev->base_addr + EL3_STATUS));
+
+	return 0;
+}
+
+static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue)
+{
+	unsigned int ioaddr = dev->base_addr;
+
+	netdev_warn(dev, "Transmit timed out!\n");
+	dump_status(dev);
+	dev->stats.tx_errors++;
+	netif_trans_update(dev); /* prevent tx timeout */
+	/* Issue TX_RESET and TX_START commands. */
+	tc589_wait_for_completion(dev, TxReset);
+	outw(TxEnable, ioaddr + EL3_CMD);
+	netif_wake_queue(dev);
+}
+
+static void pop_tx_status(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	int i;
+
+	/* Clear the Tx status stack. */
+	for (i = 32; i > 0; i--) {
+		u_char tx_status = inb(ioaddr + TX_STATUS);
+		if (!(tx_status & 0x84))
+			break;
+		/* reset transmitter on jabber error or underrun */
+		if (tx_status & 0x30)
+			tc589_wait_for_completion(dev, TxReset);
+		if (tx_status & 0x38) {
+			netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status);
+			outw(TxEnable, ioaddr + EL3_CMD);
+			dev->stats.tx_aborted_errors++;
+		}
+		outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
+	}
+}
+
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+					struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	struct el3_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n",
+	       (long)skb->len, inw(ioaddr + EL3_STATUS));
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	dev->stats.tx_bytes += skb->len;
+
+	/* Put out the doubleword header... */
+	outw(skb->len, ioaddr + TX_FIFO);
+	outw(0x00, ioaddr + TX_FIFO);
+	/* ... and the packet rounded to a doubleword. */
+	outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+
+	if (inw(ioaddr + TX_FREE) <= 1536) {
+		netif_stop_queue(dev);
+		/* Interrupt us when the FIFO has room for max-sized packet. */
+		outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
+	}
+
+	pop_tx_status(dev);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+/* The EL3 interrupt handler. */
+static irqreturn_t el3_interrupt(int irq, void *dev_id)
+{
+	struct net_device *dev = (struct net_device *) dev_id;
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned int ioaddr;
+	__u16 status;
+	int i = 0, handled = 1;
+
+	if (!netif_device_present(dev))
+		return IRQ_NONE;
+
+	ioaddr = dev->base_addr;
+
+	netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS));
+
+	spin_lock(&lp->lock);
+	while ((status = inw(ioaddr + EL3_STATUS)) &
+	(IntLatch | RxComplete | StatsFull)) {
+		if ((status & 0xe000) != 0x2000) {
+			netdev_dbg(dev, "interrupt from dead card\n");
+			handled = 0;
+			break;
+		}
+		if (status & RxComplete)
+			el3_rx(dev);
+		if (status & TxAvailable) {
+			netdev_dbg(dev, "    TX room bit was handled.\n");
+			/* There's room in the FIFO for a full-sized packet. */
+			outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+			netif_wake_queue(dev);
+		}
+		if (status & TxComplete)
+			pop_tx_status(dev);
+		if (status & (AdapterFailure | RxEarly | StatsFull)) {
+			/* Handle all uncommon interrupts. */
+			if (status & StatsFull)		/* Empty statistics. */
+				update_stats(dev);
+			if (status & RxEarly) {
+				/* Rx early is unused. */
+				el3_rx(dev);
+				outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+			}
+			if (status & AdapterFailure) {
+				u16 fifo_diag;
+				EL3WINDOW(4);
+				fifo_diag = inw(ioaddr + 4);
+				EL3WINDOW(1);
+				netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n",
+			    fifo_diag);
+				if (fifo_diag & 0x0400) {
+					/* Tx overrun */
+					tc589_wait_for_completion(dev, TxReset);
+					outw(TxEnable, ioaddr + EL3_CMD);
+				}
+				if (fifo_diag & 0x2000) {
+					/* Rx underrun */
+					tc589_wait_for_completion(dev, RxReset);
+					set_rx_mode(dev);
+					outw(RxEnable, ioaddr + EL3_CMD);
+				}
+				outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
+			}
+		}
+		if (++i > 10) {
+			netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n",
+					status);
+			/* Clear all interrupts */
+			outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
+			break;
+		}
+		/* Acknowledge the IRQ. */
+		outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+	}
+	lp->last_irq = jiffies;
+	spin_unlock(&lp->lock);
+	netdev_dbg(dev, "exiting interrupt, status %4.4x.\n",
+			inw(ioaddr + EL3_STATUS));
+	return IRQ_RETVAL(handled);
+}
+
+static void media_check(struct timer_list *t)
+{
+	struct el3_private *lp = from_timer(lp, t, media);
+	struct net_device *dev = lp->p_dev->priv;
+	unsigned int ioaddr = dev->base_addr;
+	u16 media, errs;
+	unsigned long flags;
+
+	if (!netif_device_present(dev))
+		goto reschedule;
+
+	/* Check for pending interrupt with expired latency timer: with
+	 * this, we can limp along even if the interrupt is blocked
+	 */
+	if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
+	(inb(ioaddr + EL3_TIMER) == 0xff)) {
+		if (!lp->fast_poll)
+			netdev_warn(dev, "interrupt(s) dropped!\n");
+
+		local_irq_save(flags);
+		el3_interrupt(dev->irq, dev);
+		local_irq_restore(flags);
+
+		lp->fast_poll = HZ;
+	}
+	if (lp->fast_poll) {
+		lp->fast_poll--;
+		lp->media.expires = jiffies + HZ/100;
+		add_timer(&lp->media);
+		return;
+	}
+
+	/* lp->lock guards the EL3 window. Window should always be 1 except
+	 * when the lock is held
+	 */
+
+	spin_lock_irqsave(&lp->lock, flags);
+	EL3WINDOW(4);
+	media = inw(ioaddr+WN4_MEDIA) & 0xc810;
+
+	/* Ignore collisions unless we've had no irq's recently */
+	if (time_before(jiffies, lp->last_irq + HZ)) {
+		media &= ~0x0010;
+	} else {
+		/* Try harder to detect carrier errors */
+		EL3WINDOW(6);
+		outw(StatsDisable, ioaddr + EL3_CMD);
+		errs = inb(ioaddr + 0);
+		outw(StatsEnable, ioaddr + EL3_CMD);
+		dev->stats.tx_carrier_errors += errs;
+		if (errs || (lp->media_status & 0x0010))
+			media |= 0x0010;
+	}
+
+	if (media != lp->media_status) {
+		if ((media & lp->media_status & 0x8000) &&
+				((lp->media_status ^ media) & 0x0800))
+		netdev_info(dev, "%s link beat\n",
+				(lp->media_status & 0x0800 ? "lost" : "found"));
+		else if ((media & lp->media_status & 0x4000) &&
+		 ((lp->media_status ^ media) & 0x0010))
+		netdev_info(dev, "coax cable %s\n",
+				(lp->media_status & 0x0010 ? "ok" : "problem"));
+		if (dev->if_port == 0) {
+			if (media & 0x8000) {
+				if (media & 0x0800)
+					netdev_info(dev, "flipped to 10baseT\n");
+				else
+			tc589_set_xcvr(dev, 2);
+			} else if (media & 0x4000) {
+				if (media & 0x0010)
+					tc589_set_xcvr(dev, 1);
+				else
+					netdev_info(dev, "flipped to 10base2\n");
+			}
+		}
+		lp->media_status = media;
+	}
+
+	EL3WINDOW(1);
+	spin_unlock_irqrestore(&lp->lock, flags);
+
+reschedule:
+	lp->media.expires = jiffies + HZ;
+	add_timer(&lp->media);
+}
+
+static struct net_device_stats *el3_get_stats(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned long flags;
+	struct pcmcia_device *link = lp->p_dev;
+
+	if (pcmcia_dev_present(link)) {
+		spin_lock_irqsave(&lp->lock, flags);
+		update_stats(dev);
+		spin_unlock_irqrestore(&lp->lock, flags);
+	}
+	return &dev->stats;
+}
+
+/* Update statistics.  We change to register window 6, so this should be run
+* single-threaded if the device is active. This is expected to be a rare
+* operation, and it's simpler for the rest of the driver to assume that
+* window 1 is always valid rather than use a special window-state variable.
+*
+* Caller must hold the lock for this
+*/
+
+static void update_stats(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+
+	netdev_dbg(dev, "updating the statistics.\n");
+	/* Turn off statistics updates while reading. */
+	outw(StatsDisable, ioaddr + EL3_CMD);
+	/* Switch to the stats window, and read everything. */
+	EL3WINDOW(6);
+	dev->stats.tx_carrier_errors	+= inb(ioaddr + 0);
+	dev->stats.tx_heartbeat_errors	+= inb(ioaddr + 1);
+	/* Multiple collisions. */
+	inb(ioaddr + 2);
+	dev->stats.collisions		+= inb(ioaddr + 3);
+	dev->stats.tx_window_errors		+= inb(ioaddr + 4);
+	dev->stats.rx_fifo_errors		+= inb(ioaddr + 5);
+	dev->stats.tx_packets		+= inb(ioaddr + 6);
+	/* Rx packets   */
+	inb(ioaddr + 7);
+	/* Tx deferrals */
+	inb(ioaddr + 8);
+	/* Rx octets */
+	inw(ioaddr + 10);
+	/* Tx octets */
+	inw(ioaddr + 12);
+
+	/* Back to window 1, and turn statistics back on. */
+	EL3WINDOW(1);
+	outw(StatsEnable, ioaddr + EL3_CMD);
+}
+
+static int el3_rx(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	int worklimit = 32;
+	short rx_status;
+
+	netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+	       inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
+	while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
+		    worklimit > 0) {
+		worklimit--;
+		if (rx_status & 0x4000) { /* Error, update stats. */
+			short error = rx_status & 0x3800;
+			dev->stats.rx_errors++;
+			switch (error) {
+			case 0x0000:
+				dev->stats.rx_over_errors++;
+				break;
+			case 0x0800:
+				dev->stats.rx_length_errors++;
+				break;
+			case 0x1000:
+				dev->stats.rx_frame_errors++;
+				break;
+			case 0x1800:
+				dev->stats.rx_length_errors++;
+				break;
+			case 0x2000:
+				dev->stats.rx_frame_errors++;
+				break;
+			case 0x2800:
+				dev->stats.rx_crc_errors++;
+				break;
+			}
+		} else {
+			short pkt_len = rx_status & 0x7ff;
+			struct sk_buff *skb;
+
+			skb = netdev_alloc_skb(dev, pkt_len + 5);
+
+			netdev_dbg(dev, "    Receiving packet size %d status %4.4x.\n",
+		       pkt_len, rx_status);
+			if (skb != NULL) {
+				skb_reserve(skb, 2);
+				insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
+			(pkt_len+3)>>2);
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += pkt_len;
+			} else {
+				netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n",
+			   pkt_len);
+				dev->stats.rx_dropped++;
+			}
+		}
+		/* Pop the top of the Rx FIFO */
+		tc589_wait_for_completion(dev, RxDiscard);
+	}
+	if (worklimit == 0)
+		netdev_warn(dev, "too much work in el3_rx!\n");
+	return 0;
+}
+
+static void set_rx_mode(struct net_device *dev)
+{
+	unsigned int ioaddr = dev->base_addr;
+	u16 opts = SetRxFilter | RxStation | RxBroadcast;
+
+	if (dev->flags & IFF_PROMISC)
+		opts |= RxMulticast | RxProm;
+	else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
+		opts |= RxMulticast;
+	outw(opts, ioaddr + EL3_CMD);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+	struct el3_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	set_rx_mode(dev);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int el3_close(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	struct pcmcia_device *link = lp->p_dev;
+	unsigned int ioaddr = dev->base_addr;
+
+	dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
+
+	if (pcmcia_dev_present(link)) {
+		/* Turn off statistics ASAP.  We update dev->stats below. */
+		outw(StatsDisable, ioaddr + EL3_CMD);
+
+		/* Disable the receiver and transmitter. */
+		outw(RxDisable, ioaddr + EL3_CMD);
+		outw(TxDisable, ioaddr + EL3_CMD);
+
+		if (dev->if_port == 2)
+			/* Turn off thinnet power.  Green! */
+			outw(StopCoax, ioaddr + EL3_CMD);
+		else if (dev->if_port == 1) {
+			/* Disable link beat and jabber */
+			EL3WINDOW(4);
+			outw(0, ioaddr + WN4_MEDIA);
+		}
+
+		/* Switching back to window 0 disables the IRQ. */
+		EL3WINDOW(0);
+		/* But we explicitly zero the IRQ line select anyway. */
+		outw(0x0f00, ioaddr + WN0_IRQ);
+
+		/* Check if the card still exists */
+		if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000)
+			update_stats(dev);
+	}
+
+	link->open--;
+	netif_stop_queue(dev);
+	del_timer_sync(&lp->media);
+
+	return 0;
+}
+
+static const struct pcmcia_device_id tc589_ids[] = {
+	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0101, 0x0562),
+	PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77),
+	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589),
+	PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"),
+	PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"),
+	PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, tc589_ids);
+
+static struct pcmcia_driver tc589_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "3c589_cs",
+	.probe		= tc589_probe,
+	.remove		= tc589_detach,
+	.id_table	= tc589_ids,
+	.suspend	= tc589_suspend,
+	.resume		= tc589_resume,
+};
+module_pcmcia_driver(tc589_driver);