Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 573 insertions, 0 deletions

diff --git a/drivers/net/ethernet/alacritech/slic.h b/drivers/net/ethernet/alacritech/slic.h
new file mode 100644
index 000000000..4eecbdfff
--- /dev/null
+++ b/drivers/net/ethernet/alacritech/slic.h
@@ -0,0 +1,573 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _SLIC_H
+#define _SLIC_H
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/spinlock_types.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/u64_stats_sync.h>
+
+#define SLIC_VGBSTAT_XPERR		0x40000000
+#define SLIC_VGBSTAT_XERRSHFT		25
+#define SLIC_VGBSTAT_XCSERR		0x23
+#define SLIC_VGBSTAT_XUFLOW		0x22
+#define SLIC_VGBSTAT_XHLEN		0x20
+#define SLIC_VGBSTAT_NETERR		0x01000000
+#define SLIC_VGBSTAT_NERRSHFT		16
+#define SLIC_VGBSTAT_NERRMSK		0x1ff
+#define SLIC_VGBSTAT_NCSERR		0x103
+#define SLIC_VGBSTAT_NUFLOW		0x102
+#define SLIC_VGBSTAT_NHLEN		0x100
+#define SLIC_VGBSTAT_LNKERR		0x00000080
+#define SLIC_VGBSTAT_LERRMSK		0xff
+#define SLIC_VGBSTAT_LDEARLY		0x86
+#define SLIC_VGBSTAT_LBOFLO		0x85
+#define SLIC_VGBSTAT_LCODERR		0x84
+#define SLIC_VGBSTAT_LDBLNBL		0x83
+#define SLIC_VGBSTAT_LCRCERR		0x82
+#define SLIC_VGBSTAT_LOFLO		0x81
+#define SLIC_VGBSTAT_LUFLO		0x80
+
+#define SLIC_IRHDDR_FLEN_MSK		0x0000ffff
+#define SLIC_IRHDDR_SVALID		0x80000000
+#define SLIC_IRHDDR_ERR			0x10000000
+
+#define SLIC_VRHSTAT_802OE		0x80000000
+#define SLIC_VRHSTAT_TPOFLO		0x10000000
+#define SLIC_VRHSTATB_802UE		0x80000000
+#define SLIC_VRHSTATB_RCVE		0x40000000
+#define SLIC_VRHSTATB_BUFF		0x20000000
+#define SLIC_VRHSTATB_CARRE		0x08000000
+#define SLIC_VRHSTATB_LONGE		0x02000000
+#define SLIC_VRHSTATB_PREA		0x01000000
+#define SLIC_VRHSTATB_CRC		0x00800000
+#define SLIC_VRHSTATB_DRBL		0x00400000
+#define SLIC_VRHSTATB_CODE		0x00200000
+#define SLIC_VRHSTATB_TPCSUM		0x00100000
+#define SLIC_VRHSTATB_TPHLEN		0x00080000
+#define SLIC_VRHSTATB_IPCSUM		0x00040000
+#define SLIC_VRHSTATB_IPLERR		0x00020000
+#define SLIC_VRHSTATB_IPHERR		0x00010000
+
+#define SLIC_CMD_XMT_REQ		0x01
+#define SLIC_CMD_TYPE_DUMB		3
+
+#define SLIC_RESET_MAGIC		0xDEAD
+#define SLIC_ICR_INT_OFF		0
+#define SLIC_ICR_INT_ON			1
+#define SLIC_ICR_INT_MASK		2
+
+#define SLIC_ISR_ERR			0x80000000
+#define SLIC_ISR_RCV			0x40000000
+#define SLIC_ISR_CMD			0x20000000
+#define SLIC_ISR_IO			0x60000000
+#define SLIC_ISR_UPC			0x10000000
+#define SLIC_ISR_LEVENT			0x08000000
+#define SLIC_ISR_RMISS			0x02000000
+#define SLIC_ISR_UPCERR			0x01000000
+#define SLIC_ISR_XDROP			0x00800000
+#define SLIC_ISR_UPCBSY			0x00020000
+
+#define SLIC_ISR_PING_MASK		0x00700000
+#define SLIC_ISR_UPCERR_MASK		(SLIC_ISR_UPCERR | SLIC_ISR_UPCBSY)
+#define SLIC_ISR_UPC_MASK		(SLIC_ISR_UPC | SLIC_ISR_UPCERR_MASK)
+#define SLIC_WCS_START			0x80000000
+#define SLIC_WCS_COMPARE		0x40000000
+#define SLIC_RCVWCS_BEGIN		0x40000000
+#define SLIC_RCVWCS_FINISH		0x80000000
+
+#define SLIC_MIICR_REG_16		0x00100000
+#define SLIC_MRV_REG16_XOVERON		0x0068
+
+#define SLIC_GIG_LINKUP			0x0001
+#define SLIC_GIG_FULLDUPLEX		0x0002
+#define SLIC_GIG_SPEED_MASK		0x000C
+#define SLIC_GIG_SPEED_1000		0x0008
+#define SLIC_GIG_SPEED_100		0x0004
+#define SLIC_GIG_SPEED_10		0x0000
+
+#define SLIC_GMCR_RESET			0x80000000
+#define SLIC_GMCR_GBIT			0x20000000
+#define SLIC_GMCR_FULLD			0x10000000
+#define SLIC_GMCR_GAPBB_SHIFT		14
+#define SLIC_GMCR_GAPR1_SHIFT		7
+#define SLIC_GMCR_GAPR2_SHIFT		0
+#define SLIC_GMCR_GAPBB_1000		0x60
+#define SLIC_GMCR_GAPR1_1000		0x2C
+#define SLIC_GMCR_GAPR2_1000		0x40
+#define SLIC_GMCR_GAPBB_100		0x70
+#define SLIC_GMCR_GAPR1_100		0x2C
+#define SLIC_GMCR_GAPR2_100		0x40
+
+#define SLIC_XCR_RESET			0x80000000
+#define SLIC_XCR_XMTEN			0x40000000
+#define SLIC_XCR_PAUSEEN		0x20000000
+#define SLIC_XCR_LOADRNG		0x10000000
+
+#define SLIC_GXCR_RESET			0x80000000
+#define SLIC_GXCR_XMTEN			0x40000000
+#define SLIC_GXCR_PAUSEEN		0x20000000
+
+#define SLIC_GRCR_RESET			0x80000000
+#define SLIC_GRCR_RCVEN			0x40000000
+#define SLIC_GRCR_RCVALL		0x20000000
+#define SLIC_GRCR_RCVBAD		0x10000000
+#define SLIC_GRCR_CTLEN			0x08000000
+#define SLIC_GRCR_ADDRAEN		0x02000000
+#define SLIC_GRCR_HASHSIZE_SHIFT	17
+#define SLIC_GRCR_HASHSIZE		14
+
+/* Reset Register */
+#define SLIC_REG_RESET			0x0000
+/* Interrupt Control Register */
+#define SLIC_REG_ICR			0x0008
+/* Interrupt status pointer */
+#define SLIC_REG_ISP			0x0010
+/* Interrupt status */
+#define SLIC_REG_ISR			0x0018
+/* Header buffer address reg
+ * 31-8 - phy addr of set of contiguous hdr buffers
+ *  7-0 - number of buffers passed
+ * Buffers are 256 bytes long on 256-byte boundaries.
+ */
+#define SLIC_REG_HBAR			0x0020
+/* Data buffer handle & address reg
+ * 4 sets of registers; Buffers are 2K bytes long 2 per 4K page.
+ */
+#define SLIC_REG_DBAR			0x0028
+/* Xmt Cmd buf addr regs.
+ * 1 per XMT interface
+ * 31-5 - phy addr of host command buffer
+ *  4-0 - length of cmd in multiples of 32 bytes
+ * Buffers are 32 bytes up to 512 bytes long
+ */
+#define SLIC_REG_CBAR			0x0030
+/* Write control store */
+#define	SLIC_REG_WCS			0x0034
+/*Response buffer address reg.
+ * 31-8 - phy addr of set of contiguous response buffers
+ * 7-0 - number of buffers passed
+ * Buffers are 32 bytes long on 32-byte boundaries.
+ */
+#define	SLIC_REG_RBAR			0x0038
+/* Read statistics (UPR) */
+#define	SLIC_REG_RSTAT			0x0040
+/* Read link status */
+#define	SLIC_REG_LSTAT			0x0048
+/* Write Mac Config */
+#define	SLIC_REG_WMCFG			0x0050
+/* Write phy register */
+#define SLIC_REG_WPHY			0x0058
+/* Rcv Cmd buf addr reg */
+#define	SLIC_REG_RCBAR			0x0060
+/* Read SLIC Config*/
+#define SLIC_REG_RCONFIG		0x0068
+/* Interrupt aggregation time */
+#define SLIC_REG_INTAGG			0x0070
+/* Write XMIT config reg */
+#define	SLIC_REG_WXCFG			0x0078
+/* Write RCV config reg */
+#define	SLIC_REG_WRCFG			0x0080
+/* Write rcv addr a low */
+#define	SLIC_REG_WRADDRAL		0x0088
+/* Write rcv addr a high */
+#define	SLIC_REG_WRADDRAH		0x0090
+/* Write rcv addr b low */
+#define	SLIC_REG_WRADDRBL		0x0098
+/* Write rcv addr b high */
+#define	SLIC_REG_WRADDRBH		0x00a0
+/* Low bits of mcast mask */
+#define	SLIC_REG_MCASTLOW		0x00a8
+/* High bits of mcast mask */
+#define	SLIC_REG_MCASTHIGH		0x00b0
+/* Ping the card */
+#define SLIC_REG_PING			0x00b8
+/* Dump command */
+#define SLIC_REG_DUMP_CMD		0x00c0
+/* Dump data pointer */
+#define SLIC_REG_DUMP_DATA		0x00c8
+/* Read card's pci_status register */
+#define	SLIC_REG_PCISTATUS		0x00d0
+/* Write hostid field */
+#define SLIC_REG_WRHOSTID		0x00d8
+/* Put card in a low power state */
+#define SLIC_REG_LOW_POWER		0x00e0
+/* Force slic into quiescent state  before soft reset */
+#define SLIC_REG_QUIESCE		0x00e8
+/* Reset interface queues */
+#define SLIC_REG_RESET_IFACE		0x00f0
+/* Register is only written when it has changed.
+ * Bits 63-32 for host i/f addrs.
+ */
+#define SLIC_REG_ADDR_UPPER		0x00f8
+/* 64 bit Header buffer address reg */
+#define SLIC_REG_HBAR64			0x0100
+/* 64 bit Data buffer handle & address reg */
+#define SLIC_REG_DBAR64			0x0108
+/* 64 bit Xmt Cmd buf addr regs. */
+#define SLIC_REG_CBAR64			0x0110
+/* 64 bit Response buffer address reg.*/
+#define SLIC_REG_RBAR64			0x0118
+/* 64 bit Rcv Cmd buf addr reg*/
+#define	SLIC_REG_RCBAR64		0x0120
+/* Read statistics (64 bit UPR) */
+#define	SLIC_REG_RSTAT64		0x0128
+/* Download Gigabit RCV sequencer ucode */
+#define SLIC_REG_RCV_WCS		0x0130
+/* Write VlanId field */
+#define SLIC_REG_WRVLANID		0x0138
+/* Read Transformer info */
+#define SLIC_REG_READ_XF_INFO		0x0140
+/* Write Transformer info */
+#define SLIC_REG_WRITE_XF_INFO		0x0148
+/* Write card ticks per second */
+#define SLIC_REG_TICKS_PER_SEC		0x0170
+#define SLIC_REG_HOSTID			0x1554
+
+#define PCI_VENDOR_ID_ALACRITECH		0x139A
+#define PCI_DEVICE_ID_ALACRITECH_MOJAVE		0x0005
+#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1	0x0005
+#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1_2	0x0006
+#define PCI_SUBDEVICE_ID_ALACRITECH_1000X1F	0x0007
+#define PCI_SUBDEVICE_ID_ALACRITECH_CICADA	0x0008
+#define PCI_SUBDEVICE_ID_ALACRITECH_SES1001T	0x2006
+#define PCI_SUBDEVICE_ID_ALACRITECH_SES1001F	0x2007
+#define PCI_DEVICE_ID_ALACRITECH_OASIS		0x0007
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XT	0x000B
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2002XF	0x000C
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XT	0x000D
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2001XF	0x000E
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104EF	0x000F
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2104ET	0x0010
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102EF	0x0011
+#define PCI_SUBDEVICE_ID_ALACRITECH_SEN2102ET	0x0012
+
+/* Note: power of two required for number descriptors  */
+#define SLIC_NUM_RX_LES			256
+#define SLIC_RX_BUFF_SIZE		2048
+#define SLIC_RX_BUFF_ALIGN		256
+#define SLIC_RX_BUFF_HDR_SIZE		34
+#define SLIC_MAX_REQ_RX_DESCS		1
+
+#define SLIC_NUM_TX_DESCS		256
+#define SLIC_TX_DESC_ALIGN		32
+#define SLIC_MIN_TX_WAKEUP_DESCS	10
+#define SLIC_MAX_REQ_TX_DESCS		1
+#define SLIC_MAX_TX_COMPLETIONS		100
+
+#define SLIC_NUM_STAT_DESCS		128
+#define SLIC_STATS_DESC_ALIGN		256
+
+#define SLIC_NUM_STAT_DESC_ARRAYS	4
+#define SLIC_INVALID_STAT_DESC_IDX	0xffffffff
+
+#define SLIC_UPR_LSTAT			0
+#define SLIC_UPR_CONFIG			1
+
+#define SLIC_EEPROM_SIZE		128
+#define SLIC_EEPROM_MAGIC		0xa5a5
+
+#define SLIC_FIRMWARE_MOJAVE		"slicoss/gbdownload.sys"
+#define SLIC_FIRMWARE_OASIS		"slicoss/oasisdownload.sys"
+#define SLIC_RCV_FIRMWARE_MOJAVE	"slicoss/gbrcvucode.sys"
+#define SLIC_RCV_FIRMWARE_OASIS		"slicoss/oasisrcvucode.sys"
+#define SLIC_FIRMWARE_MIN_SIZE		64
+#define SLIC_FIRMWARE_MAX_SECTIONS	3
+
+#define SLIC_MODEL_MOJAVE		0
+#define SLIC_MODEL_OASIS		1
+
+#define SLIC_INC_STATS_COUNTER(st, counter)	\
+do {						\
+	u64_stats_update_begin(&(st)->syncp);	\
+	(st)->counter++;			\
+	u64_stats_update_end(&(st)->syncp);	\
+} while (0)
+
+#define SLIC_GET_STATS_COUNTER(newst, st, counter)			\
+{									\
+	unsigned int start;						\
+	do {							\
+		start = u64_stats_fetch_begin_irq(&(st)->syncp);	\
+		newst = (st)->counter;					\
+	} while (u64_stats_fetch_retry_irq(&(st)->syncp, start));	\
+}
+
+struct slic_upr {
+	dma_addr_t paddr;
+	unsigned int type;
+	struct list_head list;
+};
+
+struct slic_upr_list {
+	bool pending;
+	struct list_head list;
+	/* upr list lock */
+	spinlock_t lock;
+};
+
+/* SLIC EEPROM structure for Mojave */
+struct slic_mojave_eeprom {
+	__le16 id;		/* 00 EEPROM/FLASH Magic code 'A5A5'*/
+	__le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
+	__le16 flash_size;	/* 02 Flash size */
+	__le16 eeprom_size;	/* 03 EEPROM Size */
+	__le16 vendor_id;	/* 04 Vendor ID */
+	__le16 dev_id;		/* 05 Device ID */
+	u8 rev_id;		/* 06 Revision ID */
+	u8 class_code[3];	/* 07 Class Code */
+	u8 irqpin_dbg;		/* 08 Debug Interrupt pin */
+	u8 irqpin;		/*    Network Interrupt Pin */
+	u8 min_grant;		/* 09 Minimum grant */
+	u8 max_lat;		/*    Maximum Latency */
+	__le16 pci_stat;	/* 10 PCI Status */
+	__le16 sub_vendor_id;	/* 11 Subsystem Vendor Id */
+	__le16 sub_id;		/* 12 Subsystem ID */
+	__le16 dev_id_dbg;	/* 13 Debug Device Id */
+	__le16 ramrom;		/* 14 Dram/Rom function */
+	__le16 dram_size2pci;	/* 15 DRAM size to PCI (bytes * 64K) */
+	__le16 rom_size2pci;	/* 16 ROM extension size to PCI (bytes * 4k) */
+	u8 pad[2];		/* 17 Padding */
+	u8 freetime;		/* 18 FreeTime setting */
+	u8 ifctrl;		/* 10-bit interface control (Mojave only) */
+	__le16 dram_size;	/* 19 DRAM size (bytes * 64k) */
+	u8 mac[ETH_ALEN];	/* 20 MAC addresses */
+	u8 mac2[ETH_ALEN];
+	u8 pad2[6];
+	u16 dev_id2;		/* Device ID for 2nd PCI function */
+	u8 irqpin2;		/* Interrupt pin for 2nd PCI function */
+	u8 class_code2[3];	/* Class Code for 2nd PCI function */
+	u16 cfg_byte6;		/* Config Byte 6 */
+	u16 pme_cap;		/* Power Mgment capabilities */
+	u16 nwclk_ctrl;		/* NetworkClockControls */
+	u8 fru_format;		/* Alacritech FRU format type */
+	u8 fru_assembly[6];	/* Alacritech FRU information */
+	u8 fru_rev[2];
+	u8 fru_serial[14];
+	u8 fru_pad[3];
+	u8 oem_fru[28];		/* optional OEM FRU format type */
+	u8 pad3[4];		/* Pad to 128 bytes - includes 2 cksum bytes
+				 * (if OEM FRU info exists) and two unusable
+				 * bytes at the end
+				 */
+};
+
+/* SLIC EEPROM structure for Oasis */
+struct slic_oasis_eeprom {
+	__le16 id;		/* 00 EEPROM/FLASH Magic code 'A5A5' */
+	__le16 eeprom_code_size;/* 01 Size of EEPROM Codes (bytes * 4)*/
+	__le16 spidev0_cfg;	/* 02 Flash Config for SPI device 0 */
+	__le16 spidev1_cfg;	/* 03 Flash Config for SPI device 1 */
+	__le16 vendor_id;	/* 04 Vendor ID */
+	__le16 dev_id;		/* 05 Device ID (function 0) */
+	u8 rev_id;		/* 06 Revision ID */
+	u8 class_code0[3];	/* 07 Class Code for PCI function 0 */
+	u8 irqpin1;		/* 08 Interrupt pin for PCI function 1*/
+	u8 class_code1[3];	/* 09 Class Code for PCI function 1 */
+	u8 irqpin2;		/* 10 Interrupt pin for PCI function 2*/
+	u8 irqpin0;		/*    Interrupt pin for PCI function 0*/
+	u8 min_grant;		/* 11 Minimum grant */
+	u8 max_lat;		/*    Maximum Latency */
+	__le16 sub_vendor_id;	/* 12 Subsystem Vendor Id */
+	__le16 sub_id;		/* 13 Subsystem ID */
+	__le16 flash_size;	/* 14 Flash size (bytes / 4K) */
+	__le16 dram_size2pci;	/* 15 DRAM size to PCI (bytes / 64K) */
+	__le16 rom_size2pci;	/* 16 Flash (ROM extension) size to PCI
+				 *   (bytes / 4K)
+				 */
+	__le16 dev_id1;		/* 17 Device Id (function 1) */
+	__le16 dev_id2;		/* 18 Device Id (function 2) */
+	__le16 dev_stat_cfg;	/* 19 Device Status Config Bytes 6-7 */
+	__le16 pme_cap;		/* 20 Power Mgment capabilities */
+	u8 msi_cap;		/* 21 MSI capabilities */
+	u8 clock_div;		/*    Clock divider */
+	__le16 pci_stat_lo;	/* 22 PCI Status bits 15:0 */
+	__le16 pci_stat_hi;	/* 23 PCI Status bits 31:16 */
+	__le16 dram_cfg_lo;	/* 24 DRAM Configuration bits 15:0 */
+	__le16 dram_cfg_hi;	/* 25 DRAM Configuration bits 31:16 */
+	__le16 dram_size;	/* 26 DRAM size (bytes / 64K) */
+	__le16 gpio_tbi_ctrl;	/* 27 GPIO/TBI controls for functions 1/0 */
+	__le16 eeprom_size;	/* 28 EEPROM Size */
+	u8 mac[ETH_ALEN];	/* 29 MAC addresses (2 ports) */
+	u8 mac2[ETH_ALEN];
+	u8 fru_format;		/* 35 Alacritech FRU format type */
+	u8 fru_assembly[6];	/* Alacritech FRU information */
+	u8 fru_rev[2];
+	u8 fru_serial[14];
+	u8 fru_pad[3];
+	u8 oem_fru[28];		/* optional OEM FRU information */
+	u8 pad[4];		/* Pad to 128 bytes - includes 2 checksum bytes
+				 * (if OEM FRU info exists) and two unusable
+				 * bytes at the end
+				 */
+};
+
+struct slic_stats {
+	u64 rx_packets;
+	u64 rx_bytes;
+	u64 rx_mcasts;
+	u64 rx_errors;
+	u64 tx_packets;
+	u64 tx_bytes;
+	/* HW STATS */
+	u64 rx_buff_miss;
+	u64 tx_dropped;
+	u64 irq_errs;
+	/* transport layer */
+	u64 rx_tpcsum;
+	u64 rx_tpoflow;
+	u64 rx_tphlen;
+	/* ip layer */
+	u64 rx_ipcsum;
+	u64 rx_iplen;
+	u64 rx_iphlen;
+	/* link layer */
+	u64 rx_early;
+	u64 rx_buffoflow;
+	u64 rx_lcode;
+	u64 rx_drbl;
+	u64 rx_crc;
+	u64 rx_oflow802;
+	u64 rx_uflow802;
+	/* oasis only */
+	u64 tx_carrier;
+	struct u64_stats_sync syncp;
+};
+
+struct slic_shmem_data {
+	__le32 isr;
+	__le32 link;
+};
+
+struct slic_shmem {
+	dma_addr_t isr_paddr;
+	dma_addr_t link_paddr;
+	struct slic_shmem_data *shmem_data;
+};
+
+struct slic_rx_info_oasis {
+	__le32 frame_status;
+	__le32 frame_status_b;
+	__le32 time_stamp;
+	__le32 checksum;
+};
+
+struct slic_rx_info_mojave {
+	__le32 frame_status;
+	__le16 byte_cnt;
+	__le16 tp_chksum;
+	__le16 ctx_hash;
+	__le16 mac_hash;
+	__le16 buff_lnk;
+};
+
+struct slic_stat_desc {
+	__le32 hnd;
+	__u8 pad[8];
+	__le32 status;
+	__u8 pad2[16];
+};
+
+struct slic_stat_queue {
+	struct slic_stat_desc *descs[SLIC_NUM_STAT_DESC_ARRAYS];
+	dma_addr_t paddr[SLIC_NUM_STAT_DESC_ARRAYS];
+	unsigned int addr_offset[SLIC_NUM_STAT_DESC_ARRAYS];
+	unsigned int active_array;
+	unsigned int len;
+	unsigned int done_idx;
+	size_t mem_size;
+};
+
+struct slic_tx_desc {
+	__le32 hnd;
+	__le32 rsvd;
+	u8 cmd;
+	u8 flags;
+	__le16 rsvd2;
+	__le32 totlen;
+	__le32 paddrl;
+	__le32 paddrh;
+	__le32 len;
+	__le32 type;
+};
+
+struct slic_tx_buffer {
+	struct sk_buff *skb;
+	DEFINE_DMA_UNMAP_ADDR(map_addr);
+	DEFINE_DMA_UNMAP_LEN(map_len);
+	struct slic_tx_desc *desc;
+	dma_addr_t desc_paddr;
+};
+
+struct slic_tx_queue {
+	struct dma_pool *dma_pool;
+	struct slic_tx_buffer *txbuffs;
+	unsigned int len;
+	unsigned int put_idx;
+	unsigned int done_idx;
+};
+
+struct slic_rx_desc {
+	u8 pad[16];
+	__le32 buffer;
+	__le32 length;
+	__le32 status;
+};
+
+struct slic_rx_buffer {
+	struct sk_buff *skb;
+	DEFINE_DMA_UNMAP_ADDR(map_addr);
+	DEFINE_DMA_UNMAP_LEN(map_len);
+	unsigned int addr_offset;
+};
+
+struct slic_rx_queue {
+	struct slic_rx_buffer *rxbuffs;
+	unsigned int len;
+	unsigned int done_idx;
+	unsigned int put_idx;
+};
+
+struct slic_device {
+	struct pci_dev *pdev;
+	struct net_device *netdev;
+	void __iomem *regs;
+	/* upper address setting lock */
+	spinlock_t upper_lock;
+	struct slic_shmem shmem;
+	struct napi_struct napi;
+	struct slic_rx_queue rxq;
+	struct slic_tx_queue txq;
+	struct slic_stat_queue stq;
+	struct slic_stats stats;
+	struct slic_upr_list upr_list;
+	/* link configuration lock */
+	spinlock_t link_lock;
+	bool promisc;
+	int speed;
+	unsigned int duplex;
+	bool is_fiber;
+	unsigned char model;
+};
+
+static inline u32 slic_read(struct slic_device *sdev, unsigned int reg)
+{
+	return ioread32(sdev->regs + reg);
+}
+
+static inline void slic_write(struct slic_device *sdev, unsigned int reg,
+			      u32 val)
+{
+	iowrite32(val, sdev->regs + reg);
+}
+
+static inline void slic_flush_write(struct slic_device *sdev)
+{
+	(void)ioread32(sdev->regs + SLIC_REG_HOSTID);
+}
+
+#endif /* _SLIC_H */