Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 914 insertions, 0 deletions

diff --git a/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_struct.h b/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_struct.h
new file mode 100644
index 000000000..c2fda80fe
--- /dev/null
+++ b/drivers/net/ethernet/aquantia/atlantic/macsec/macsec_struct.h
@@ -0,0 +1,914 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Atlantic Network Driver
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#ifndef _MACSEC_STRUCT_H_
+#define _MACSEC_STRUCT_H_
+
+/*! Represents the bitfields of a single row in the Egress CTL Filter
+ *  table.
+ */
+struct aq_mss_egress_ctlf_record {
+	/*! This is used to store the 48 bit value used to compare SA, DA or
+	 *  halfDA+half SA value.
+	 */
+	u32 sa_da[2];
+	/*! This is used to store the 16 bit ethertype value used for
+	 *  comparison.
+	 */
+	u32 eth_type;
+	/*! The match mask is per-nibble. 0 means don't care, i.e. every value
+	 *  will match successfully. The total data is 64 bit, i.e. 16 nibbles
+	 *  masks.
+	 */
+	u32 match_mask;
+	/*! 0: No compare, i.e. This entry is not used
+	 *  1: compare DA only
+	 *  2: compare SA only
+	 *  3: compare half DA + half SA
+	 *  4: compare ether type only
+	 *  5: compare DA + ethertype
+	 *  6: compare SA + ethertype
+	 *  7: compare DA+ range.
+	 */
+	u32 match_type;
+	/*! 0: Bypass the remaining modules if matched.
+	 *  1: Forward to next module for more classifications.
+	 */
+	u32 action;
+};
+
+/*! Represents the bitfields of a single row in the Egress Packet
+ *  Classifier table.
+ */
+struct aq_mss_egress_class_record {
+	/*! VLAN ID field. */
+	u32 vlan_id;
+	/*! VLAN UP field. */
+	u32 vlan_up;
+	/*! VLAN Present in the Packet. */
+	u32 vlan_valid;
+	/*! The 8 bit value used to compare with extracted value for byte 3. */
+	u32 byte3;
+	/*! The 8 bit value used to compare with extracted value for byte 2. */
+	u32 byte2;
+	/*! The 8 bit value used to compare with extracted value for byte 1. */
+	u32 byte1;
+	/*! The 8 bit value used to compare with extracted value for byte 0. */
+	u32 byte0;
+	/*! The 8 bit TCI field used to compare with extracted value. */
+	u32 tci;
+	/*! The 64 bit SCI field in the SecTAG. */
+	u32 sci[2];
+	/*! The 16 bit Ethertype (in the clear) field used to compare with
+	 *  extracted value.
+	 */
+	u32 eth_type;
+	/*! This is to specify the 40bit SNAP header if the SNAP header's mask
+	 *  is enabled.
+	 */
+	u32 snap[2];
+	/*! This is to specify the 24bit LLC header if the LLC header's mask is
+	 *  enabled.
+	 */
+	u32 llc;
+	/*! The 48 bit MAC_SA field used to compare with extracted value. */
+	u32 mac_sa[2];
+	/*! The 48 bit MAC_DA field used to compare with extracted value. */
+	u32 mac_da[2];
+	/*! The 32 bit Packet number used to compare with extracted value. */
+	u32 pn;
+	/*! 0~63: byte location used extracted by packets comparator, which
+	 *  can be anything from the first 64 bytes of the MAC packets.
+	 *  This byte location counted from MAC' DA address. i.e. set to 0
+	 *  will point to byte 0 of DA address.
+	 */
+	u32 byte3_location;
+	/*! 0: don't care
+	 *  1: enable comparison of extracted byte pointed by byte 3 location.
+	 */
+	u32 byte3_mask;
+	/*! 0~63: byte location used extracted by packets comparator, which
+	 *  can be anything from the first 64 bytes of the MAC packets.
+	 *  This byte location counted from MAC' DA address. i.e. set to 0
+	 *  will point to byte 0 of DA address.
+	 */
+	u32 byte2_location;
+	/*! 0: don't care
+	 *  1: enable comparison of extracted byte pointed by byte 2 location.
+	 */
+	u32 byte2_mask;
+	/*! 0~63: byte location used extracted by packets comparator, which
+	 *  can be anything from the first 64 bytes of the MAC packets.
+	 *  This byte location counted from MAC' DA address. i.e. set to 0
+	 *  will point to byte 0 of DA address.
+	 */
+	u32 byte1_location;
+	/*! 0: don't care
+	 *  1: enable comparison of extracted byte pointed by byte 1 location.
+	 */
+	u32 byte1_mask;
+	/*! 0~63: byte location used extracted by packets comparator, which
+	 *  can be anything from the first 64 bytes of the MAC packets.
+	 *  This byte location counted from MAC' DA address. i.e. set to 0
+	 *  will point to byte 0 of DA address.
+	 */
+	u32 byte0_location;
+	/*! 0: don't care
+	 *  1: enable comparison of extracted byte pointed by byte 0 location.
+	 */
+	u32 byte0_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care
+	 *  1: enable comparison of extracted VLAN ID field.
+	 */
+	u32 vlan_id_mask;
+	/*! 0: don't care
+	 *  1: enable comparison of extracted VLAN UP field.
+	 */
+	u32 vlan_up_mask;
+	/*! 0: don't care
+	 *  1: enable comparison of extracted VLAN Valid field.
+	 */
+	u32 vlan_valid_mask;
+	/*! This is bit mask to enable comparison the 8 bit TCI field,
+	 *  including the AN field.
+	 *  For explicit SECTAG, AN is hardware controlled. For sending
+	 *  packet w/ explicit SECTAG, rest of the TCI fields are directly
+	 *  from the SECTAG.
+	 */
+	u32 tci_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care
+	 *  1: enable comparison of SCI
+	 *  Note: If this field is not 0, this means the input packet's
+	 *  SECTAG is explicitly tagged and MACSEC module will only update
+	 *  the MSDU.
+	 *  PN number is hardware controlled.
+	 */
+	u32 sci_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care
+	 *  1: enable comparison of Ethertype.
+	 */
+	u32 eth_type_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care and no SNAP header exist.
+	 *  1: compare the SNAP header.
+	 *  If this bit is set to 1, the extracted filed will assume the
+	 *  SNAP header exist as encapsulated in 802.3 (RFC 1042). I.E. the
+	 *  next 5 bytes after the LLC header is SNAP header.
+	 */
+	u32 snap_mask;
+	/*! 0: don't care and no LLC header exist.
+	 *  1: compare the LLC header.
+	 *  If this bit is set to 1, the extracted filed will assume the
+	 *  LLC header exist as encapsulated in 802.3 (RFC 1042). I.E. the
+	 *  next three bytes after the 802.3MAC header is LLC header.
+	 */
+	u32 llc_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care
+	 *  1: enable comparison of MAC_SA.
+	 */
+	u32 sa_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care
+	 *  1: enable comparison of MAC_DA.
+	 */
+	u32 da_mask;
+	/*! Mask is per-byte. */
+	u32 pn_mask;
+	/*! Reserved. This bit should be always 0. */
+	u32 eight02dot2;
+	/*! 1: For explicit sectag case use TCI_SC from table
+	 *  0: use TCI_SC from explicit sectag.
+	 */
+	u32 tci_sc;
+	/*! 1: For explicit sectag case,use TCI_V,ES,SCB,E,C from table
+	 *  0: use TCI_V,ES,SCB,E,C from explicit sectag.
+	 */
+	u32 tci_87543;
+	/*! 1: indicates that incoming packet has explicit sectag. */
+	u32 exp_sectag_en;
+	/*! If packet matches and tagged as controlled-packet, this SC/SA
+	 *  index is used for later SC and SA table lookup.
+	 */
+	u32 sc_idx;
+	/*! This field is used to specify how many SA entries are
+	 *  associated with 1 SC entry.
+	 *  2'b00: 1 SC has 4 SA.
+	 *  SC index is equivalent to {SC_Index[4:2], 1'b0}.
+	 *  SA index is equivalent to {SC_Index[4:2], SC entry's current AN[1:0]
+	 *  2'b10: 1 SC has 2 SA.
+	 *  SC index is equivalent to SC_Index[4:1]
+	 *  SA index is equivalent to {SC_Index[4:1], SC entry's current AN[0]}
+	 *  2'b11: 1 SC has 1 SA. No SC entry exists for the specific SA.
+	 *  SA index is equivalent to SC_Index[4:0]
+	 *  Note: if specified as 2'b11, hardware AN roll over is not
+	 *  supported.
+	 */
+	u32 sc_sa;
+	/*! 0: the packets will be sent to MAC FIFO
+	 *  1: The packets will be sent to Debug/Loopback FIFO.
+	 *  If the above's action is drop, this bit has no meaning.
+	 */
+	u32 debug;
+	/*! 0: forward to remaining modules
+	 *  1: bypass the next encryption modules. This packet is considered
+	 *     un-control packet.
+	 *  2: drop
+	 *  3: Reserved.
+	 */
+	u32 action;
+	/*! 0: Not valid entry. This entry is not used
+	 *  1: valid entry.
+	 */
+	u32 valid;
+};
+
+/*! Represents the bitfields of a single row in the Egress SC Lookup table. */
+struct aq_mss_egress_sc_record {
+	/*! This is to specify when the SC was first used. Set by HW. */
+	u32 start_time;
+	/*! This is to specify when the SC was last used. Set by HW. */
+	u32 stop_time;
+	/*! This is to specify which of the SA entries are used by current HW.
+	 *  Note: This value need to be set by SW after reset.  It will be
+	 *  automatically updated by HW, if AN roll over is enabled.
+	 */
+	u32 curr_an;
+	/*! 0: Clear the SA Valid Bit after PN expiry.
+	 *  1: Do not Clear the SA Valid bit after PN expiry of the current SA.
+	 *  When the Enable AN roll over is set, S/W does not need to
+	 *  program the new SA's and the H/W will automatically roll over
+	 *  between the SA's without session expiry.
+	 *  For normal operation, Enable AN Roll over will be set to '0'
+	 *  and in which case, the SW needs to program the new SA values
+	 *  after the current PN expires.
+	 */
+	u32 an_roll;
+	/*! This is the TCI field used if packet is not explicitly tagged. */
+	u32 tci;
+	/*! This value indicates the offset where the decryption will start.
+	 *  [[Values of 0, 4, 8-50].
+	 */
+	u32 enc_off;
+	/*! 0: Do not protect frames, all the packets will be forwarded
+	 *     unchanged. MIB counter (OutPktsUntagged) will be updated.
+	 *  1: Protect.
+	 */
+	u32 protect;
+	/*! 0: when none of the SA related to SC has inUse set.
+	 *  1: when either of the SA related to the SC has inUse set.
+	 *  This bit is set by HW.
+	 */
+	u32 recv;
+	/*! 0: H/W Clears this bit on the first use.
+	 *  1: SW updates this entry, when programming the SC Table.
+	 */
+	u32 fresh;
+	/*! AES Key size
+	 *  00 - 128bits
+	 *  01 - 192bits
+	 *  10 - 256bits
+	 *  11 - Reserved.
+	 */
+	u32 sak_len;
+	/*! 0: Invalid SC
+	 *  1: Valid SC.
+	 */
+	u32 valid;
+};
+
+/*! Represents the bitfields of a single row in the Egress SA Lookup table. */
+struct aq_mss_egress_sa_record {
+	/*! This is to specify when the SC was first used. Set by HW. */
+	u32 start_time;
+	/*! This is to specify when the SC was last used. Set by HW. */
+	u32 stop_time;
+	/*! This is set by SW and updated by HW to store the Next PN number
+	 *  used for encryption.
+	 */
+	u32 next_pn;
+	/*! The Next_PN number is going to wrapped around from 0xFFFF_FFFF
+	 *  to 0. set by HW.
+	 */
+	u32 sat_pn;
+	/*! 0: This SA is in use.
+	 *  1: This SA is Fresh and set by SW.
+	 */
+	u32 fresh;
+	/*! 0: Invalid SA
+	 *  1: Valid SA.
+	 */
+	u32 valid;
+};
+
+/*! Represents the bitfields of a single row in the Egress SA Key
+ *  Lookup table.
+ */
+struct aq_mss_egress_sakey_record {
+	/*! Key for AES-GCM processing. */
+	u32 key[8];
+};
+
+/*! Represents the bitfields of a single row in the Ingress Pre-MACSec
+ *  CTL Filter table.
+ */
+struct aq_mss_ingress_prectlf_record {
+	/*! This is used to store the 48 bit value used to compare SA, DA
+	 *  or halfDA+half SA value.
+	 */
+	u32 sa_da[2];
+	/*! This is used to store the 16 bit ethertype value used for
+	 *  comparison.
+	 */
+	u32 eth_type;
+	/*! The match mask is per-nibble. 0 means don't care, i.e. every
+	 *  value will match successfully. The total data is 64 bit, i.e.
+	 *  16 nibbles masks.
+	 */
+	u32 match_mask;
+	/*! 0: No compare, i.e. This entry is not used
+	 *  1: compare DA only
+	 *  2: compare SA only
+	 *  3: compare half DA + half SA
+	 *  4: compare ether type only
+	 *  5: compare DA + ethertype
+	 *  6: compare SA + ethertype
+	 *  7: compare DA+ range.
+	 */
+	u32 match_type;
+	/*! 0: Bypass the remaining modules if matched.
+	 *  1: Forward to next module for more classifications.
+	 */
+	u32 action;
+};
+
+/*! Represents the bitfields of a single row in the Ingress Pre-MACSec
+ *  Packet Classifier table.
+ */
+struct aq_mss_ingress_preclass_record {
+	/*! The 64 bit SCI field used to compare with extracted value.
+	 *  Should have SCI value in case TCI[SCI_SEND] == 0. This will be
+	 *  used for ICV calculation.
+	 */
+	u32 sci[2];
+	/*! The 8 bit TCI field used to compare with extracted value. */
+	u32 tci;
+	/*! 8 bit encryption offset. */
+	u32 encr_offset;
+	/*! The 16 bit Ethertype (in the clear) field used to compare with
+	 *  extracted value.
+	 */
+	u32 eth_type;
+	/*! This is to specify the 40bit SNAP header if the SNAP header's
+	 *  mask is enabled.
+	 */
+	u32 snap[2];
+	/*! This is to specify the 24bit LLC header if the LLC header's
+	 *  mask is enabled.
+	 */
+	u32 llc;
+	/*! The 48 bit MAC_SA field used to compare with extracted value. */
+	u32 mac_sa[2];
+	/*! The 48 bit MAC_DA field used to compare with extracted value. */
+	u32 mac_da[2];
+	/*! 0: this is to compare with non-LPBK packet
+	 *  1: this is to compare with LPBK packet.
+	 *  This value is used to compare with a controlled-tag which goes
+	 *  with the packet when looped back from Egress port.
+	 */
+	u32 lpbk_packet;
+	/*! The value of this bit mask will affects how the SC index and SA
+	 *  index created.
+	 *  2'b00: 1 SC has 4 SA.
+	 *    SC index is equivalent to {SC_Index[4:2], 1'b0}.
+	 *    SA index is equivalent to {SC_Index[4:2], SECTAG's AN[1:0]}
+	 *    Here AN bits are not compared.
+	 *  2'b10: 1 SC has 2 SA.
+	 *    SC index is equivalent to SC_Index[4:1]
+	 *    SA index is equivalent to {SC_Index[4:1], SECTAG's AN[0]}
+	 *    Compare AN[1] field only
+	 *  2'b11: 1 SC has 1 SA. No SC entry exists for the specific SA.
+	 *    SA index is equivalent to SC_Index[4:0]
+	 *    AN[1:0] bits are compared.
+	 *    NOTE: This design is to supports different usage of AN. User
+	 *    can either ping-pong buffer 2 SA by using only the AN[0] bit.
+	 *    Or use 4 SA per SC by use AN[1:0] bits. Or even treat each SA
+	 *    as independent. i.e. AN[1:0] is just another matching pointer
+	 *    to select SA.
+	 */
+	u32 an_mask;
+	/*! This is bit mask to enable comparison the upper 6 bits TCI
+	 *  field, which does not include the AN field.
+	 *  0: don't compare
+	 *  1: enable comparison of the bits.
+	 */
+	u32 tci_mask;
+	/*! 0: don't care
+	 *  1: enable comparison of SCI.
+	 */
+	u32 sci_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care
+	 *  1: enable comparison of Ethertype.
+	 */
+	u32 eth_type_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care and no SNAP header exist.
+	 *  1: compare the SNAP header.
+	 *  If this bit is set to 1, the extracted filed will assume the
+	 *  SNAP header exist as encapsulated in 802.3 (RFC 1042). I.E. the
+	 *  next 5 bytes after the LLC header is SNAP header.
+	 */
+	u32 snap_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care and no LLC header exist.
+	 *  1: compare the LLC header.
+	 *  If this bit is set to 1, the extracted filed will assume the
+	 *  LLC header exist as encapsulated in 802.3 (RFC 1042). I.E. the
+	 *  next three bytes after the 802.3MAC header is LLC header.
+	 */
+	u32 llc_mask;
+	/*! Reserved. This bit should be always 0. */
+	u32 _802_2_encapsulate;
+	/*! Mask is per-byte.
+	 *  0: don't care
+	 *  1: enable comparison of MAC_SA.
+	 */
+	u32 sa_mask;
+	/*! Mask is per-byte.
+	 *  0: don't care
+	 *  1: enable comparison of MAC_DA.
+	 */
+	u32 da_mask;
+	/*! 0: don't care
+	 *  1: enable checking if this is loopback packet or not.
+	 */
+	u32 lpbk_mask;
+	/*! If packet matches and tagged as controlled-packet. This SC/SA
+	 *  index is used for later SC and SA table lookup.
+	 */
+	u32 sc_idx;
+	/*! 0: the packets will be sent to MAC FIFO
+	 *  1: The packets will be sent to Debug/Loopback FIFO.
+	 *  If the above's action is drop. This bit has no meaning.
+	 */
+	u32 proc_dest;
+	/*! 0: Process: Forward to next two modules for 802.1AE decryption.
+	 *  1: Process but keep SECTAG: Forward to next two modules for
+	 *     802.1AE decryption but keep the MACSEC header with added error
+	 *     code information. ICV will be stripped for all control packets.
+	 *  2: Bypass: Bypass the next two decryption modules but processed
+	 *     by post-classification.
+	 *  3: Drop: drop this packet and update counts accordingly.
+	 */
+	u32 action;
+	/*! 0: This is a controlled-port packet if matched.
+	 *  1: This is an uncontrolled-port packet if matched.
+	 */
+	u32 ctrl_unctrl;
+	/*! Use the SCI value from the Table if 'SC' bit of the input
+	 *  packet is not present.
+	 */
+	u32 sci_from_table;
+	/*! Reserved. */
+	u32 reserved;
+	/*! 0: Not valid entry. This entry is not used
+	 *  1: valid entry.
+	 */
+	u32 valid;
+};
+
+/*! Represents the bitfields of a single row in the Ingress SC Lookup table. */
+struct aq_mss_ingress_sc_record {
+	/*! This is to specify when the SC was first used. Set by HW. */
+	u32 stop_time;
+	/*! This is to specify when the SC was first used. Set by HW. */
+	u32 start_time;
+	/*! 0: Strict
+	 *  1: Check
+	 *  2: Disabled.
+	 */
+	u32 validate_frames;
+	/*! 1: Replay control enabled.
+	 *  0: replay control disabled.
+	 */
+	u32 replay_protect;
+	/*! This is to specify the window range for anti-replay. Default is 0.
+	 *  0: is strict order enforcement.
+	 */
+	u32 anti_replay_window;
+	/*! 0: when none of the SA related to SC has inUse set.
+	 *  1: when either of the SA related to the SC has inUse set.
+	 *  This bit is set by HW.
+	 */
+	u32 receiving;
+	/*! 0: when hardware processed the SC for the first time, it clears
+	 *     this bit
+	 *  1: This bit is set by SW, when it sets up the SC.
+	 */
+	u32 fresh;
+	/*! 0: The AN number will not automatically roll over if Next_PN is
+	 *     saturated.
+	 *  1: The AN number will automatically roll over if Next_PN is
+	 *     saturated.
+	 *  Rollover is valid only after expiry. Normal roll over between
+	 *  SA's should be normal process.
+	 */
+	u32 an_rol;
+	/*! Reserved. */
+	u32 reserved;
+	/*! 0: Invalid SC
+	 *  1: Valid SC.
+	 */
+	u32 valid;
+};
+
+/*! Represents the bitfields of a single row in the Ingress SA Lookup table. */
+struct aq_mss_ingress_sa_record {
+	/*! This is to specify when the SC was first used. Set by HW. */
+	u32 stop_time;
+	/*! This is to specify when the SC was first used. Set by HW. */
+	u32 start_time;
+	/*! This is updated by HW to store the expected NextPN number for
+	 *  anti-replay.
+	 */
+	u32 next_pn;
+	/*! The Next_PN number is going to wrapped around from 0XFFFF_FFFF
+	 *  to 0. set by HW.
+	 */
+	u32 sat_nextpn;
+	/*! 0: This SA is not yet used.
+	 *  1: This SA is inUse.
+	 */
+	u32 in_use;
+	/*! 0: when hardware processed the SC for the first time, it clears
+	 *     this timer
+	 *  1: This bit is set by SW, when it sets up the SC.
+	 */
+	u32 fresh;
+	/*! Reserved. */
+	u32 reserved;
+	/*! 0: Invalid SA.
+	 *  1: Valid SA.
+	 */
+	u32 valid;
+};
+
+/*! Represents the bitfields of a single row in the Ingress SA Key
+ *  Lookup table.
+ */
+struct aq_mss_ingress_sakey_record {
+	/*! Key for AES-GCM processing. */
+	u32 key[8];
+	/*! AES key size
+	 *  00 - 128bits
+	 *  01 - 192bits
+	 *  10 - 256bits
+	 *  11 - reserved.
+	 */
+	u32 key_len;
+};
+
+/*! Represents the bitfields of a single row in the Ingress Post-
+ *  MACSec Packet Classifier table.
+ */
+struct aq_mss_ingress_postclass_record {
+	/*! The 8 bit value used to compare with extracted value for byte 0. */
+	u32 byte0;
+	/*! The 8 bit value used to compare with extracted value for byte 1. */
+	u32 byte1;
+	/*! The 8 bit value used to compare with extracted value for byte 2. */
+	u32 byte2;
+	/*! The 8 bit value used to compare with extracted value for byte 3. */
+	u32 byte3;
+	/*! Ethertype in the packet. */
+	u32 eth_type;
+	/*! Ether Type value > 1500 (0x5dc). */
+	u32 eth_type_valid;
+	/*! VLAN ID after parsing. */
+	u32 vlan_id;
+	/*! VLAN priority after parsing. */
+	u32 vlan_up;
+	/*! Valid VLAN coding. */
+	u32 vlan_valid;
+	/*! SA index. */
+	u32 sai;
+	/*! SAI hit, i.e. controlled packet. */
+	u32 sai_hit;
+	/*! Mask for payload ethertype field. */
+	u32 eth_type_mask;
+	/*! 0~63: byte location used extracted by packets comparator, which
+	 *  can be anything from the first 64 bytes of the MAC packets.
+	 *  This byte location counted from MAC' DA address. i.e. set to 0
+	 *  will point to byte 0 of DA address.
+	 */
+	u32 byte3_location;
+	/*! Mask for Byte Offset 3. */
+	u32 byte3_mask;
+	/*! 0~63: byte location used extracted by packets comparator, which
+	 *  can be anything from the first 64 bytes of the MAC packets.
+	 *  This byte location counted from MAC' DA address. i.e. set to 0
+	 *  will point to byte 0 of DA address.
+	 */
+	u32 byte2_location;
+	/*! Mask for Byte Offset 2. */
+	u32 byte2_mask;
+	/*! 0~63: byte location used extracted by packets comparator, which
+	 *  can be anything from the first 64 bytes of the MAC packets.
+	 *  This byte location counted from MAC' DA address. i.e. set to 0
+	 *  will point to byte 0 of DA address.
+	 */
+	u32 byte1_location;
+	/*! Mask for Byte Offset 1. */
+	u32 byte1_mask;
+	/*! 0~63: byte location used extracted by packets comparator, which
+	 *  can be anything from the first 64 bytes of the MAC packets.
+	 *  This byte location counted from MAC' DA address. i.e. set to 0
+	 *  will point to byte 0 of DA address.
+	 */
+	u32 byte0_location;
+	/*! Mask for Byte Offset 0. */
+	u32 byte0_mask;
+	/*! Mask for Ethertype valid field. Indicates 802.3 vs. Other. */
+	u32 eth_type_valid_mask;
+	/*! Mask for VLAN ID field. */
+	u32 vlan_id_mask;
+	/*! Mask for VLAN UP field. */
+	u32 vlan_up_mask;
+	/*! Mask for VLAN valid field. */
+	u32 vlan_valid_mask;
+	/*! Mask for SAI. */
+	u32 sai_mask;
+	/*! Mask for SAI_HIT. */
+	u32 sai_hit_mask;
+	/*! Action if only first level matches and second level does not.
+	 *  0: pass
+	 *  1: drop (fail).
+	 */
+	u32 firstlevel_actions;
+	/*! Action if both first and second level matched.
+	 *  0: pass
+	 *  1: drop (fail).
+	 */
+	u32 secondlevel_actions;
+	/*! Reserved. */
+	u32 reserved;
+	/*! 0: Not valid entry. This entry is not used
+	 *  1: valid entry.
+	 */
+	u32 valid;
+};
+
+/*! Represents the bitfields of a single row in the Ingress Post-
+ *  MACSec CTL Filter table.
+ */
+struct aq_mss_ingress_postctlf_record {
+	/*! This is used to store the 48 bit value used to compare SA, DA
+	 *  or halfDA+half SA value.
+	 */
+	u32 sa_da[2];
+	/*! This is used to store the 16 bit ethertype value used for
+	 *  comparison.
+	 */
+	u32 eth_type;
+	/*! The match mask is per-nibble. 0 means don't care, i.e. every
+	 *  value will match successfully. The total data is 64 bit, i.e.
+	 *  16 nibbles masks.
+	 */
+	u32 match_mask;
+	/*! 0: No compare, i.e. This entry is not used
+	 *  1: compare DA only
+	 *  2: compare SA only
+	 *  3: compare half DA + half SA
+	 *  4: compare ether type only
+	 *  5: compare DA + ethertype
+	 *  6: compare SA + ethertype
+	 *  7: compare DA+ range.
+	 */
+	u32 match_type;
+	/*! 0: Bypass the remaining modules if matched.
+	 *  1: Forward to next module for more classifications.
+	 */
+	u32 action;
+};
+
+/*! Represents the Egress MIB counters for a single SC. Counters are
+ *  64 bits, lower 32 bits in field[0].
+ */
+struct aq_mss_egress_sc_counters {
+	/*! The number of integrity protected but not encrypted packets
+	 *  for this transmitting SC.
+	 */
+	u32 sc_protected_pkts[2];
+	/*! The number of integrity protected and encrypted packets for
+	 *  this transmitting SC.
+	 */
+	u32 sc_encrypted_pkts[2];
+	/*! The number of plain text octets that are integrity protected
+	 *  but not encrypted on the transmitting SC.
+	 */
+	u32 sc_protected_octets[2];
+	/*! The number of plain text octets that are integrity protected
+	 *  and encrypted on the transmitting SC.
+	 */
+	u32 sc_encrypted_octets[2];
+};
+
+/*! Represents the Egress MIB counters for a single SA. Counters are
+ *  64 bits, lower 32 bits in field[0].
+ */
+struct aq_mss_egress_sa_counters {
+	/*! The number of dropped packets for this transmitting SA. */
+	u32 sa_hit_drop_redirect[2];
+	/*! TODO */
+	u32 sa_protected2_pkts[2];
+	/*! The number of integrity protected but not encrypted packets
+	 *  for this transmitting SA.
+	 */
+	u32 sa_protected_pkts[2];
+	/*! The number of integrity protected and encrypted packets for
+	 *  this transmitting SA.
+	 */
+	u32 sa_encrypted_pkts[2];
+};
+
+/*! Represents the common Egress MIB counters; the counter not
+ *  associated with a particular SC/SA. Counters are 64 bits, lower 32
+ *  bits in field[0].
+ */
+struct aq_mss_egress_common_counters {
+	/*! The number of transmitted packets classified as MAC_CTL packets. */
+	u32 ctl_pkt[2];
+	/*! The number of transmitted packets that did not match any rows
+	 *  in the Egress Packet Classifier table.
+	 */
+	u32 unknown_sa_pkts[2];
+	/*! The number of transmitted packets where the SC table entry has
+	 *  protect=0 (so packets are forwarded unchanged).
+	 */
+	u32 untagged_pkts[2];
+	/*! The number of transmitted packets discarded because the packet
+	 *  length is greater than the ifMtu of the Common Port interface.
+	 */
+	u32 too_long[2];
+	/*! The number of transmitted packets for which table memory was
+	 *  affected by an ECC error during processing.
+	 */
+	u32 ecc_error_pkts[2];
+	/*! The number of transmitted packets for where the matched row in
+	 *  the Egress Packet Classifier table has action=drop.
+	 */
+	u32 unctrl_hit_drop_redir[2];
+};
+
+/*! Represents the Ingress MIB counters for a single SA. Counters are
+ *  64 bits, lower 32 bits in field[0].
+ */
+struct aq_mss_ingress_sa_counters {
+	/*! For this SA, the number of received packets without a SecTAG. */
+	u32 untagged_hit_pkts[2];
+	/*! For this SA, the number of received packets that were dropped. */
+	u32 ctrl_hit_drop_redir_pkts[2];
+	/*! For this SA which is not currently in use, the number of
+	 *  received packets that have been discarded, and have either the
+	 *  packets encrypted or the matched row in the Ingress SC Lookup
+	 *  table has validate_frames=Strict.
+	 */
+	u32 not_using_sa[2];
+	/*! For this SA which is not currently in use, the number of
+	 *  received, unencrypted, packets with the matched row in the
+	 *  Ingress SC Lookup table has validate_frames!=Strict.
+	 */
+	u32 unused_sa[2];
+	/*! For this SA, the number discarded packets with the condition
+	 *  that the packets are not valid and one of the following
+	 *  conditions are true: either the matched row in the Ingress SC
+	 *  Lookup table has validate_frames=Strict or the packets
+	 *  encrypted.
+	 */
+	u32 not_valid_pkts[2];
+	/*! For this SA, the number of packets with the condition that the
+	 *  packets are not valid and the matched row in the Ingress SC
+	 *  Lookup table has validate_frames=Check.
+	 */
+	u32 invalid_pkts[2];
+	/*! For this SA, the number of validated packets. */
+	u32 ok_pkts[2];
+	/*! For this SC, the number of received packets that have been
+	 *  discarded with the condition: the matched row in the Ingress
+	 *  SC Lookup table has replay_protect=1 and the PN of the packet
+	 *  is lower than the lower bound replay check PN.
+	 */
+	u32 late_pkts[2];
+	/*! For this SA, the number of packets with the condition that the
+	 *  PN of the packets is lower than the lower bound replay
+	 *  protection PN.
+	 */
+	u32 delayed_pkts[2];
+	/*! For this SC, the number of packets with the following condition:
+	 *  - the matched row in the Ingress SC Lookup table has
+	 *    replay_protect=0 or
+	 *  - the matched row in the Ingress SC Lookup table has
+	 *    replay_protect=1 and the packet is not encrypted and the
+	 *    integrity check has failed or
+	 *  - the matched row in the Ingress SC Lookup table has
+	 *    replay_protect=1 and the packet is encrypted and integrity
+	 *    check has failed.
+	 */
+	u32 unchecked_pkts[2];
+	/*! The number of octets of plaintext recovered from received
+	 *  packets that were integrity protected but not encrypted.
+	 */
+	u32 validated_octets[2];
+	/*! The number of octets of plaintext recovered from received
+	 *  packets that were integrity protected and encrypted.
+	 */
+	u32 decrypted_octets[2];
+};
+
+/*! Represents the common Ingress MIB counters; the counter not
+ *  associated with a particular SA. Counters are 64 bits, lower 32
+ *  bits in field[0].
+ */
+struct aq_mss_ingress_common_counters {
+	/*! The number of received packets classified as MAC_CTL packets. */
+	u32 ctl_pkts[2];
+	/*! The number of received packets with the MAC security tag
+	 *  (SecTAG), not matching any rows in the Ingress Pre-MACSec
+	 *  Packet Classifier table.
+	 */
+	u32 tagged_miss_pkts[2];
+	/*! The number of received packets without the MAC security tag
+	 *  (SecTAG), not matching any rows in the Ingress Pre-MACSec
+	 *  Packet Classifier table.
+	 */
+	u32 untagged_miss_pkts[2];
+	/*! The number of received packets discarded without the MAC
+	 *  security tag (SecTAG) and with the matched row in the Ingress
+	 *  SC Lookup table having validate_frames=Strict.
+	 */
+	u32 notag_pkts[2];
+	/*! The number of received packets without the MAC security tag
+	 *  (SecTAG) and with the matched row in the Ingress SC Lookup
+	 *  table having validate_frames!=Strict.
+	 */
+	u32 untagged_pkts[2];
+	/*! The number of received packets discarded with an invalid
+	 *  SecTAG or a zero value PN or an invalid ICV.
+	 */
+	u32 bad_tag_pkts[2];
+	/*! The number of received packets discarded with unknown SCI
+	 *  information with the condition:
+	 *  the matched row in the Ingress SC Lookup table has
+	 *  validate_frames=Strict or the C bit in the SecTAG is set.
+	 */
+	u32 no_sci_pkts[2];
+	/*! The number of received packets with unknown SCI with the condition:
+	 *  The matched row in the Ingress SC Lookup table has
+	 *  validate_frames!=Strict and the C bit in the SecTAG is not set.
+	 */
+	u32 unknown_sci_pkts[2];
+	/*! The number of received packets by the controlled port service
+	 *  that passed the Ingress Post-MACSec Packet Classifier table
+	 *  check.
+	 */
+	u32 ctrl_prt_pass_pkts[2];
+	/*! The number of received packets by the uncontrolled port
+	 *  service that passed the Ingress Post-MACSec Packet Classifier
+	 *  table check.
+	 */
+	u32 unctrl_prt_pass_pkts[2];
+	/*! The number of received packets by the controlled port service
+	 *  that failed the Ingress Post-MACSec Packet Classifier table
+	 *  check.
+	 */
+	u32 ctrl_prt_fail_pkts[2];
+	/*! The number of received packets by the uncontrolled port
+	 *  service that failed the Ingress Post-MACSec Packet Classifier
+	 *  table check.
+	 */
+	u32 unctrl_prt_fail_pkts[2];
+	/*! The number of received packets discarded because the packet
+	 *  length is greater than the ifMtu of the Common Port interface.
+	 */
+	u32 too_long_pkts[2];
+	/*! The number of received packets classified as MAC_CTL by the
+	 *  Ingress Post-MACSec CTL Filter table.
+	 */
+	u32 igpoc_ctl_pkts[2];
+	/*! The number of received packets for which table memory was
+	 *  affected by an ECC error during processing.
+	 */
+	u32 ecc_error_pkts[2];
+	/*! The number of received packets by the uncontrolled port
+	 *  service that were dropped.
+	 */
+	u32 unctrl_hit_drop_redir[2];
+};
+
+#endif