Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 5234 insertions, 0 deletions

diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c
new file mode 100644
index 000000000..46809e2d9
--- /dev/null
+++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c
@@ -0,0 +1,5234 @@
+/*
+ * This file is part of the Chelsio T4 Ethernet driver for Linux.
+ *
+ * Copyright (c) 2003-2014 Chelsio Communications, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/dma-mapping.h>
+#include <linux/jiffies.h>
+#include <linux/prefetch.h>
+#include <linux/export.h>
+#include <net/xfrm.h>
+#include <net/ipv6.h>
+#include <net/tcp.h>
+#include <net/busy_poll.h>
+#ifdef CONFIG_CHELSIO_T4_FCOE
+#include <scsi/fc/fc_fcoe.h>
+#endif /* CONFIG_CHELSIO_T4_FCOE */
+#include "cxgb4.h"
+#include "t4_regs.h"
+#include "t4_values.h"
+#include "t4_msg.h"
+#include "t4fw_api.h"
+#include "cxgb4_ptp.h"
+#include "cxgb4_uld.h"
+#include "cxgb4_tc_mqprio.h"
+#include "sched.h"
+
+/*
+ * Rx buffer size.  We use largish buffers if possible but settle for single
+ * pages under memory shortage.
+ */
+#if PAGE_SHIFT >= 16
+# define FL_PG_ORDER 0
+#else
+# define FL_PG_ORDER (16 - PAGE_SHIFT)
+#endif
+
+/* RX_PULL_LEN should be <= RX_COPY_THRES */
+#define RX_COPY_THRES    256
+#define RX_PULL_LEN      128
+
+/*
+ * Main body length for sk_buffs used for Rx Ethernet packets with fragments.
+ * Should be >= RX_PULL_LEN but possibly bigger to give pskb_may_pull some room.
+ */
+#define RX_PKT_SKB_LEN   512
+
+/*
+ * Max number of Tx descriptors we clean up at a time.  Should be modest as
+ * freeing skbs isn't cheap and it happens while holding locks.  We just need
+ * to free packets faster than they arrive, we eventually catch up and keep
+ * the amortized cost reasonable.  Must be >= 2 * TXQ_STOP_THRES.  It should
+ * also match the CIDX Flush Threshold.
+ */
+#define MAX_TX_RECLAIM 32
+
+/*
+ * Max number of Rx buffers we replenish at a time.  Again keep this modest,
+ * allocating buffers isn't cheap either.
+ */
+#define MAX_RX_REFILL 16U
+
+/*
+ * Period of the Rx queue check timer.  This timer is infrequent as it has
+ * something to do only when the system experiences severe memory shortage.
+ */
+#define RX_QCHECK_PERIOD (HZ / 2)
+
+/*
+ * Period of the Tx queue check timer.
+ */
+#define TX_QCHECK_PERIOD (HZ / 2)
+
+/*
+ * Max number of Tx descriptors to be reclaimed by the Tx timer.
+ */
+#define MAX_TIMER_TX_RECLAIM 100
+
+/*
+ * Timer index used when backing off due to memory shortage.
+ */
+#define NOMEM_TMR_IDX (SGE_NTIMERS - 1)
+
+/*
+ * Suspension threshold for non-Ethernet Tx queues.  We require enough room
+ * for a full sized WR.
+ */
+#define TXQ_STOP_THRES (SGE_MAX_WR_LEN / sizeof(struct tx_desc))
+
+/*
+ * Max Tx descriptor space we allow for an Ethernet packet to be inlined
+ * into a WR.
+ */
+#define MAX_IMM_TX_PKT_LEN 256
+
+/*
+ * Max size of a WR sent through a control Tx queue.
+ */
+#define MAX_CTRL_WR_LEN SGE_MAX_WR_LEN
+
+struct rx_sw_desc {                /* SW state per Rx descriptor */
+	struct page *page;
+	dma_addr_t dma_addr;
+};
+
+/*
+ * Rx buffer sizes for "useskbs" Free List buffers (one ingress packet pe skb
+ * buffer).  We currently only support two sizes for 1500- and 9000-byte MTUs.
+ * We could easily support more but there doesn't seem to be much need for
+ * that ...
+ */
+#define FL_MTU_SMALL 1500
+#define FL_MTU_LARGE 9000
+
+static inline unsigned int fl_mtu_bufsize(struct adapter *adapter,
+					  unsigned int mtu)
+{
+	struct sge *s = &adapter->sge;
+
+	return ALIGN(s->pktshift + ETH_HLEN + VLAN_HLEN + mtu, s->fl_align);
+}
+
+#define FL_MTU_SMALL_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_SMALL)
+#define FL_MTU_LARGE_BUFSIZE(adapter) fl_mtu_bufsize(adapter, FL_MTU_LARGE)
+
+/*
+ * Bits 0..3 of rx_sw_desc.dma_addr have special meaning.  The hardware uses
+ * these to specify the buffer size as an index into the SGE Free List Buffer
+ * Size register array.  We also use bit 4, when the buffer has been unmapped
+ * for DMA, but this is of course never sent to the hardware and is only used
+ * to prevent double unmappings.  All of the above requires that the Free List
+ * Buffers which we allocate have the bottom 5 bits free (0) -- i.e. are
+ * 32-byte or or a power of 2 greater in alignment.  Since the SGE's minimal
+ * Free List Buffer alignment is 32 bytes, this works out for us ...
+ */
+enum {
+	RX_BUF_FLAGS     = 0x1f,   /* bottom five bits are special */
+	RX_BUF_SIZE      = 0x0f,   /* bottom three bits are for buf sizes */
+	RX_UNMAPPED_BUF  = 0x10,   /* buffer is not mapped */
+
+	/*
+	 * XXX We shouldn't depend on being able to use these indices.
+	 * XXX Especially when some other Master PF has initialized the
+	 * XXX adapter or we use the Firmware Configuration File.  We
+	 * XXX should really search through the Host Buffer Size register
+	 * XXX array for the appropriately sized buffer indices.
+	 */
+	RX_SMALL_PG_BUF  = 0x0,   /* small (PAGE_SIZE) page buffer */
+	RX_LARGE_PG_BUF  = 0x1,   /* buffer large (FL_PG_ORDER) page buffer */
+
+	RX_SMALL_MTU_BUF = 0x2,   /* small MTU buffer */
+	RX_LARGE_MTU_BUF = 0x3,   /* large MTU buffer */
+};
+
+static int timer_pkt_quota[] = {1, 1, 2, 3, 4, 5};
+#define MIN_NAPI_WORK  1
+
+static inline dma_addr_t get_buf_addr(const struct rx_sw_desc *d)
+{
+	return d->dma_addr & ~(dma_addr_t)RX_BUF_FLAGS;
+}
+
+static inline bool is_buf_mapped(const struct rx_sw_desc *d)
+{
+	return !(d->dma_addr & RX_UNMAPPED_BUF);
+}
+
+/**
+ *	txq_avail - return the number of available slots in a Tx queue
+ *	@q: the Tx queue
+ *
+ *	Returns the number of descriptors in a Tx queue available to write new
+ *	packets.
+ */
+static inline unsigned int txq_avail(const struct sge_txq *q)
+{
+	return q->size - 1 - q->in_use;
+}
+
+/**
+ *	fl_cap - return the capacity of a free-buffer list
+ *	@fl: the FL
+ *
+ *	Returns the capacity of a free-buffer list.  The capacity is less than
+ *	the size because one descriptor needs to be left unpopulated, otherwise
+ *	HW will think the FL is empty.
+ */
+static inline unsigned int fl_cap(const struct sge_fl *fl)
+{
+	return fl->size - 8;   /* 1 descriptor = 8 buffers */
+}
+
+/**
+ *	fl_starving - return whether a Free List is starving.
+ *	@adapter: pointer to the adapter
+ *	@fl: the Free List
+ *
+ *	Tests specified Free List to see whether the number of buffers
+ *	available to the hardware has falled below our "starvation"
+ *	threshold.
+ */
+static inline bool fl_starving(const struct adapter *adapter,
+			       const struct sge_fl *fl)
+{
+	const struct sge *s = &adapter->sge;
+
+	return fl->avail - fl->pend_cred <= s->fl_starve_thres;
+}
+
+int cxgb4_map_skb(struct device *dev, const struct sk_buff *skb,
+		  dma_addr_t *addr)
+{
+	const skb_frag_t *fp, *end;
+	const struct skb_shared_info *si;
+
+	*addr = dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE);
+	if (dma_mapping_error(dev, *addr))
+		goto out_err;
+
+	si = skb_shinfo(skb);
+	end = &si->frags[si->nr_frags];
+
+	for (fp = si->frags; fp < end; fp++) {
+		*++addr = skb_frag_dma_map(dev, fp, 0, skb_frag_size(fp),
+					   DMA_TO_DEVICE);
+		if (dma_mapping_error(dev, *addr))
+			goto unwind;
+	}
+	return 0;
+
+unwind:
+	while (fp-- > si->frags)
+		dma_unmap_page(dev, *--addr, skb_frag_size(fp), DMA_TO_DEVICE);
+
+	dma_unmap_single(dev, addr[-1], skb_headlen(skb), DMA_TO_DEVICE);
+out_err:
+	return -ENOMEM;
+}
+EXPORT_SYMBOL(cxgb4_map_skb);
+
+static void unmap_skb(struct device *dev, const struct sk_buff *skb,
+		      const dma_addr_t *addr)
+{
+	const skb_frag_t *fp, *end;
+	const struct skb_shared_info *si;
+
+	dma_unmap_single(dev, *addr++, skb_headlen(skb), DMA_TO_DEVICE);
+
+	si = skb_shinfo(skb);
+	end = &si->frags[si->nr_frags];
+	for (fp = si->frags; fp < end; fp++)
+		dma_unmap_page(dev, *addr++, skb_frag_size(fp), DMA_TO_DEVICE);
+}
+
+#ifdef CONFIG_NEED_DMA_MAP_STATE
+/**
+ *	deferred_unmap_destructor - unmap a packet when it is freed
+ *	@skb: the packet
+ *
+ *	This is the packet destructor used for Tx packets that need to remain
+ *	mapped until they are freed rather than until their Tx descriptors are
+ *	freed.
+ */
+static void deferred_unmap_destructor(struct sk_buff *skb)
+{
+	unmap_skb(skb->dev->dev.parent, skb, (dma_addr_t *)skb->head);
+}
+#endif
+
+/**
+ *	free_tx_desc - reclaims Tx descriptors and their buffers
+ *	@adap: the adapter
+ *	@q: the Tx queue to reclaim descriptors from
+ *	@n: the number of descriptors to reclaim
+ *	@unmap: whether the buffers should be unmapped for DMA
+ *
+ *	Reclaims Tx descriptors from an SGE Tx queue and frees the associated
+ *	Tx buffers.  Called with the Tx queue lock held.
+ */
+void free_tx_desc(struct adapter *adap, struct sge_txq *q,
+		  unsigned int n, bool unmap)
+{
+	unsigned int cidx = q->cidx;
+	struct tx_sw_desc *d;
+
+	d = &q->sdesc[cidx];
+	while (n--) {
+		if (d->skb) {                       /* an SGL is present */
+			if (unmap && d->addr[0]) {
+				unmap_skb(adap->pdev_dev, d->skb, d->addr);
+				memset(d->addr, 0, sizeof(d->addr));
+			}
+			dev_consume_skb_any(d->skb);
+			d->skb = NULL;
+		}
+		++d;
+		if (++cidx == q->size) {
+			cidx = 0;
+			d = q->sdesc;
+		}
+	}
+	q->cidx = cidx;
+}
+
+/*
+ * Return the number of reclaimable descriptors in a Tx queue.
+ */
+static inline int reclaimable(const struct sge_txq *q)
+{
+	int hw_cidx = ntohs(READ_ONCE(q->stat->cidx));
+	hw_cidx -= q->cidx;
+	return hw_cidx < 0 ? hw_cidx + q->size : hw_cidx;
+}
+
+/**
+ *	reclaim_completed_tx - reclaims completed TX Descriptors
+ *	@adap: the adapter
+ *	@q: the Tx queue to reclaim completed descriptors from
+ *	@maxreclaim: the maximum number of TX Descriptors to reclaim or -1
+ *	@unmap: whether the buffers should be unmapped for DMA
+ *
+ *	Reclaims Tx Descriptors that the SGE has indicated it has processed,
+ *	and frees the associated buffers if possible.  If @max == -1, then
+ *	we'll use a defaiult maximum.  Called with the TX Queue locked.
+ */
+static inline int reclaim_completed_tx(struct adapter *adap, struct sge_txq *q,
+				       int maxreclaim, bool unmap)
+{
+	int reclaim = reclaimable(q);
+
+	if (reclaim) {
+		/*
+		 * Limit the amount of clean up work we do at a time to keep
+		 * the Tx lock hold time O(1).
+		 */
+		if (maxreclaim < 0)
+			maxreclaim = MAX_TX_RECLAIM;
+		if (reclaim > maxreclaim)
+			reclaim = maxreclaim;
+
+		free_tx_desc(adap, q, reclaim, unmap);
+		q->in_use -= reclaim;
+	}
+
+	return reclaim;
+}
+
+/**
+ *	cxgb4_reclaim_completed_tx - reclaims completed Tx descriptors
+ *	@adap: the adapter
+ *	@q: the Tx queue to reclaim completed descriptors from
+ *	@unmap: whether the buffers should be unmapped for DMA
+ *
+ *	Reclaims Tx descriptors that the SGE has indicated it has processed,
+ *	and frees the associated buffers if possible.  Called with the Tx
+ *	queue locked.
+ */
+void cxgb4_reclaim_completed_tx(struct adapter *adap, struct sge_txq *q,
+				bool unmap)
+{
+	(void)reclaim_completed_tx(adap, q, -1, unmap);
+}
+EXPORT_SYMBOL(cxgb4_reclaim_completed_tx);
+
+static inline int get_buf_size(struct adapter *adapter,
+			       const struct rx_sw_desc *d)
+{
+	struct sge *s = &adapter->sge;
+	unsigned int rx_buf_size_idx = d->dma_addr & RX_BUF_SIZE;
+	int buf_size;
+
+	switch (rx_buf_size_idx) {
+	case RX_SMALL_PG_BUF:
+		buf_size = PAGE_SIZE;
+		break;
+
+	case RX_LARGE_PG_BUF:
+		buf_size = PAGE_SIZE << s->fl_pg_order;
+		break;
+
+	case RX_SMALL_MTU_BUF:
+		buf_size = FL_MTU_SMALL_BUFSIZE(adapter);
+		break;
+
+	case RX_LARGE_MTU_BUF:
+		buf_size = FL_MTU_LARGE_BUFSIZE(adapter);
+		break;
+
+	default:
+		BUG();
+	}
+
+	return buf_size;
+}
+
+/**
+ *	free_rx_bufs - free the Rx buffers on an SGE free list
+ *	@adap: the adapter
+ *	@q: the SGE free list to free buffers from
+ *	@n: how many buffers to free
+ *
+ *	Release the next @n buffers on an SGE free-buffer Rx queue.   The
+ *	buffers must be made inaccessible to HW before calling this function.
+ */
+static void free_rx_bufs(struct adapter *adap, struct sge_fl *q, int n)
+{
+	while (n--) {
+		struct rx_sw_desc *d = &q->sdesc[q->cidx];
+
+		if (is_buf_mapped(d))
+			dma_unmap_page(adap->pdev_dev, get_buf_addr(d),
+				       get_buf_size(adap, d),
+				       DMA_FROM_DEVICE);
+		put_page(d->page);
+		d->page = NULL;
+		if (++q->cidx == q->size)
+			q->cidx = 0;
+		q->avail--;
+	}
+}
+
+/**
+ *	unmap_rx_buf - unmap the current Rx buffer on an SGE free list
+ *	@adap: the adapter
+ *	@q: the SGE free list
+ *
+ *	Unmap the current buffer on an SGE free-buffer Rx queue.   The
+ *	buffer must be made inaccessible to HW before calling this function.
+ *
+ *	This is similar to @free_rx_bufs above but does not free the buffer.
+ *	Do note that the FL still loses any further access to the buffer.
+ */
+static void unmap_rx_buf(struct adapter *adap, struct sge_fl *q)
+{
+	struct rx_sw_desc *d = &q->sdesc[q->cidx];
+
+	if (is_buf_mapped(d))
+		dma_unmap_page(adap->pdev_dev, get_buf_addr(d),
+			       get_buf_size(adap, d), DMA_FROM_DEVICE);
+	d->page = NULL;
+	if (++q->cidx == q->size)
+		q->cidx = 0;
+	q->avail--;
+}
+
+static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
+{
+	if (q->pend_cred >= 8) {
+		u32 val = adap->params.arch.sge_fl_db;
+
+		if (is_t4(adap->params.chip))
+			val |= PIDX_V(q->pend_cred / 8);
+		else
+			val |= PIDX_T5_V(q->pend_cred / 8);
+
+		/* Make sure all memory writes to the Free List queue are
+		 * committed before we tell the hardware about them.
+		 */
+		wmb();
+
+		/* If we don't have access to the new User Doorbell (T5+), use
+		 * the old doorbell mechanism; otherwise use the new BAR2
+		 * mechanism.
+		 */
+		if (unlikely(q->bar2_addr == NULL)) {
+			t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL_A),
+				     val | QID_V(q->cntxt_id));
+		} else {
+			writel(val | QID_V(q->bar2_qid),
+			       q->bar2_addr + SGE_UDB_KDOORBELL);
+
+			/* This Write memory Barrier will force the write to
+			 * the User Doorbell area to be flushed.
+			 */
+			wmb();
+		}
+		q->pend_cred &= 7;
+	}
+}
+
+static inline void set_rx_sw_desc(struct rx_sw_desc *sd, struct page *pg,
+				  dma_addr_t mapping)
+{
+	sd->page = pg;
+	sd->dma_addr = mapping;      /* includes size low bits */
+}
+
+/**
+ *	refill_fl - refill an SGE Rx buffer ring
+ *	@adap: the adapter
+ *	@q: the ring to refill
+ *	@n: the number of new buffers to allocate
+ *	@gfp: the gfp flags for the allocations
+ *
+ *	(Re)populate an SGE free-buffer queue with up to @n new packet buffers,
+ *	allocated with the supplied gfp flags.  The caller must assure that
+ *	@n does not exceed the queue's capacity.  If afterwards the queue is
+ *	found critically low mark it as starving in the bitmap of starving FLs.
+ *
+ *	Returns the number of buffers allocated.
+ */
+static unsigned int refill_fl(struct adapter *adap, struct sge_fl *q, int n,
+			      gfp_t gfp)
+{
+	struct sge *s = &adap->sge;
+	struct page *pg;
+	dma_addr_t mapping;
+	unsigned int cred = q->avail;
+	__be64 *d = &q->desc[q->pidx];
+	struct rx_sw_desc *sd = &q->sdesc[q->pidx];
+	int node;
+
+#ifdef CONFIG_DEBUG_FS
+	if (test_bit(q->cntxt_id - adap->sge.egr_start, adap->sge.blocked_fl))
+		goto out;
+#endif
+
+	gfp |= __GFP_NOWARN;
+	node = dev_to_node(adap->pdev_dev);
+
+	if (s->fl_pg_order == 0)
+		goto alloc_small_pages;
+
+	/*
+	 * Prefer large buffers
+	 */
+	while (n) {
+		pg = alloc_pages_node(node, gfp | __GFP_COMP, s->fl_pg_order);
+		if (unlikely(!pg)) {
+			q->large_alloc_failed++;
+			break;       /* fall back to single pages */
+		}
+
+		mapping = dma_map_page(adap->pdev_dev, pg, 0,
+				       PAGE_SIZE << s->fl_pg_order,
+				       DMA_FROM_DEVICE);
+		if (unlikely(dma_mapping_error(adap->pdev_dev, mapping))) {
+			__free_pages(pg, s->fl_pg_order);
+			q->mapping_err++;
+			goto out;   /* do not try small pages for this error */
+		}
+		mapping |= RX_LARGE_PG_BUF;
+		*d++ = cpu_to_be64(mapping);
+
+		set_rx_sw_desc(sd, pg, mapping);
+		sd++;
+
+		q->avail++;
+		if (++q->pidx == q->size) {
+			q->pidx = 0;
+			sd = q->sdesc;
+			d = q->desc;
+		}
+		n--;
+	}
+
+alloc_small_pages:
+	while (n--) {
+		pg = alloc_pages_node(node, gfp, 0);
+		if (unlikely(!pg)) {
+			q->alloc_failed++;
+			break;
+		}
+
+		mapping = dma_map_page(adap->pdev_dev, pg, 0, PAGE_SIZE,
+				       DMA_FROM_DEVICE);
+		if (unlikely(dma_mapping_error(adap->pdev_dev, mapping))) {
+			put_page(pg);
+			q->mapping_err++;
+			goto out;
+		}
+		*d++ = cpu_to_be64(mapping);
+
+		set_rx_sw_desc(sd, pg, mapping);
+		sd++;
+
+		q->avail++;
+		if (++q->pidx == q->size) {
+			q->pidx = 0;
+			sd = q->sdesc;
+			d = q->desc;
+		}
+	}
+
+out:	cred = q->avail - cred;
+	q->pend_cred += cred;
+	ring_fl_db(adap, q);
+
+	if (unlikely(fl_starving(adap, q))) {
+		smp_wmb();
+		q->low++;
+		set_bit(q->cntxt_id - adap->sge.egr_start,
+			adap->sge.starving_fl);
+	}
+
+	return cred;
+}
+
+static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
+{
+	refill_fl(adap, fl, min(MAX_RX_REFILL, fl_cap(fl) - fl->avail),
+		  GFP_ATOMIC);
+}
+
+/**
+ *	alloc_ring - allocate resources for an SGE descriptor ring
+ *	@dev: the PCI device's core device
+ *	@nelem: the number of descriptors
+ *	@elem_size: the size of each descriptor
+ *	@sw_size: the size of the SW state associated with each ring element
+ *	@phys: the physical address of the allocated ring
+ *	@metadata: address of the array holding the SW state for the ring
+ *	@stat_size: extra space in HW ring for status information
+ *	@node: preferred node for memory allocations
+ *
+ *	Allocates resources for an SGE descriptor ring, such as Tx queues,
+ *	free buffer lists, or response queues.  Each SGE ring requires
+ *	space for its HW descriptors plus, optionally, space for the SW state
+ *	associated with each HW entry (the metadata).  The function returns
+ *	three values: the virtual address for the HW ring (the return value
+ *	of the function), the bus address of the HW ring, and the address
+ *	of the SW ring.
+ */
+static void *alloc_ring(struct device *dev, size_t nelem, size_t elem_size,
+			size_t sw_size, dma_addr_t *phys, void *metadata,
+			size_t stat_size, int node)
+{
+	size_t len = nelem * elem_size + stat_size;
+	void *s = NULL;
+	void *p = dma_alloc_coherent(dev, len, phys, GFP_KERNEL);
+
+	if (!p)
+		return NULL;
+	if (sw_size) {
+		s = kcalloc_node(sw_size, nelem, GFP_KERNEL, node);
+
+		if (!s) {
+			dma_free_coherent(dev, len, p, *phys);
+			return NULL;
+		}
+	}
+	if (metadata)
+		*(void **)metadata = s;
+	return p;
+}
+
+/**
+ *	sgl_len - calculates the size of an SGL of the given capacity
+ *	@n: the number of SGL entries
+ *
+ *	Calculates the number of flits needed for a scatter/gather list that
+ *	can hold the given number of entries.
+ */
+static inline unsigned int sgl_len(unsigned int n)
+{
+	/* A Direct Scatter Gather List uses 32-bit lengths and 64-bit PCI DMA
+	 * addresses.  The DSGL Work Request starts off with a 32-bit DSGL
+	 * ULPTX header, then Length0, then Address0, then, for 1 <= i <= N,
+	 * repeated sequences of { Length[i], Length[i+1], Address[i],
+	 * Address[i+1] } (this ensures that all addresses are on 64-bit
+	 * boundaries).  If N is even, then Length[N+1] should be set to 0 and
+	 * Address[N+1] is omitted.
+	 *
+	 * The following calculation incorporates all of the above.  It's
+	 * somewhat hard to follow but, briefly: the "+2" accounts for the
+	 * first two flits which include the DSGL header, Length0 and
+	 * Address0; the "(3*(n-1))/2" covers the main body of list entries (3
+	 * flits for every pair of the remaining N) +1 if (n-1) is odd; and
+	 * finally the "+((n-1)&1)" adds the one remaining flit needed if
+	 * (n-1) is odd ...
+	 */
+	n--;
+	return (3 * n) / 2 + (n & 1) + 2;
+}
+
+/**
+ *	flits_to_desc - returns the num of Tx descriptors for the given flits
+ *	@n: the number of flits
+ *
+ *	Returns the number of Tx descriptors needed for the supplied number
+ *	of flits.
+ */
+static inline unsigned int flits_to_desc(unsigned int n)
+{
+	BUG_ON(n > SGE_MAX_WR_LEN / 8);
+	return DIV_ROUND_UP(n, 8);
+}
+
+/**
+ *	is_eth_imm - can an Ethernet packet be sent as immediate data?
+ *	@skb: the packet
+ *	@chip_ver: chip version
+ *
+ *	Returns whether an Ethernet packet is small enough to fit as
+ *	immediate data. Return value corresponds to headroom required.
+ */
+static inline int is_eth_imm(const struct sk_buff *skb, unsigned int chip_ver)
+{
+	int hdrlen = 0;
+
+	if (skb->encapsulation && skb_shinfo(skb)->gso_size &&
+	    chip_ver > CHELSIO_T5) {
+		hdrlen = sizeof(struct cpl_tx_tnl_lso);
+		hdrlen += sizeof(struct cpl_tx_pkt_core);
+	} else if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
+		return 0;
+	} else {
+		hdrlen = skb_shinfo(skb)->gso_size ?
+			 sizeof(struct cpl_tx_pkt_lso_core) : 0;
+		hdrlen += sizeof(struct cpl_tx_pkt);
+	}
+	if (skb->len <= MAX_IMM_TX_PKT_LEN - hdrlen)
+		return hdrlen;
+	return 0;
+}
+
+/**
+ *	calc_tx_flits - calculate the number of flits for a packet Tx WR
+ *	@skb: the packet
+ *	@chip_ver: chip version
+ *
+ *	Returns the number of flits needed for a Tx WR for the given Ethernet
+ *	packet, including the needed WR and CPL headers.
+ */
+static inline unsigned int calc_tx_flits(const struct sk_buff *skb,
+					 unsigned int chip_ver)
+{
+	unsigned int flits;
+	int hdrlen = is_eth_imm(skb, chip_ver);
+
+	/* If the skb is small enough, we can pump it out as a work request
+	 * with only immediate data.  In that case we just have to have the
+	 * TX Packet header plus the skb data in the Work Request.
+	 */
+
+	if (hdrlen)
+		return DIV_ROUND_UP(skb->len + hdrlen, sizeof(__be64));
+
+	/* Otherwise, we're going to have to construct a Scatter gather list
+	 * of the skb body and fragments.  We also include the flits necessary
+	 * for the TX Packet Work Request and CPL.  We always have a firmware
+	 * Write Header (incorporated as part of the cpl_tx_pkt_lso and
+	 * cpl_tx_pkt structures), followed by either a TX Packet Write CPL
+	 * message or, if we're doing a Large Send Offload, an LSO CPL message
+	 * with an embedded TX Packet Write CPL message.
+	 */
+	flits = sgl_len(skb_shinfo(skb)->nr_frags + 1);
+	if (skb_shinfo(skb)->gso_size) {
+		if (skb->encapsulation && chip_ver > CHELSIO_T5) {
+			hdrlen = sizeof(struct fw_eth_tx_pkt_wr) +
+				 sizeof(struct cpl_tx_tnl_lso);
+		} else if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
+			u32 pkt_hdrlen;
+
+			pkt_hdrlen = eth_get_headlen(skb->dev, skb->data,
+						     skb_headlen(skb));
+			hdrlen = sizeof(struct fw_eth_tx_eo_wr) +
+				 round_up(pkt_hdrlen, 16);
+		} else {
+			hdrlen = sizeof(struct fw_eth_tx_pkt_wr) +
+				 sizeof(struct cpl_tx_pkt_lso_core);
+		}
+
+		hdrlen += sizeof(struct cpl_tx_pkt_core);
+		flits += (hdrlen / sizeof(__be64));
+	} else {
+		flits += (sizeof(struct fw_eth_tx_pkt_wr) +
+			  sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
+	}
+	return flits;
+}
+
+/**
+ *	calc_tx_descs - calculate the number of Tx descriptors for a packet
+ *	@skb: the packet
+ *	@chip_ver: chip version
+ *
+ *	Returns the number of Tx descriptors needed for the given Ethernet
+ *	packet, including the needed WR and CPL headers.
+ */
+static inline unsigned int calc_tx_descs(const struct sk_buff *skb,
+					 unsigned int chip_ver)
+{
+	return flits_to_desc(calc_tx_flits(skb, chip_ver));
+}
+
+/**
+ *	cxgb4_write_sgl - populate a scatter/gather list for a packet
+ *	@skb: the packet
+ *	@q: the Tx queue we are writing into
+ *	@sgl: starting location for writing the SGL
+ *	@end: points right after the end of the SGL
+ *	@start: start offset into skb main-body data to include in the SGL
+ *	@addr: the list of bus addresses for the SGL elements
+ *
+ *	Generates a gather list for the buffers that make up a packet.
+ *	The caller must provide adequate space for the SGL that will be written.
+ *	The SGL includes all of the packet's page fragments and the data in its
+ *	main body except for the first @start bytes.  @sgl must be 16-byte
+ *	aligned and within a Tx descriptor with available space.  @end points
+ *	right after the end of the SGL but does not account for any potential
+ *	wrap around, i.e., @end > @sgl.
+ */
+void cxgb4_write_sgl(const struct sk_buff *skb, struct sge_txq *q,
+		     struct ulptx_sgl *sgl, u64 *end, unsigned int start,
+		     const dma_addr_t *addr)
+{
+	unsigned int i, len;
+	struct ulptx_sge_pair *to;
+	const struct skb_shared_info *si = skb_shinfo(skb);
+	unsigned int nfrags = si->nr_frags;
+	struct ulptx_sge_pair buf[MAX_SKB_FRAGS / 2 + 1];
+
+	len = skb_headlen(skb) - start;
+	if (likely(len)) {
+		sgl->len0 = htonl(len);
+		sgl->addr0 = cpu_to_be64(addr[0] + start);
+		nfrags++;
+	} else {
+		sgl->len0 = htonl(skb_frag_size(&si->frags[0]));
+		sgl->addr0 = cpu_to_be64(addr[1]);
+	}
+
+	sgl->cmd_nsge = htonl(ULPTX_CMD_V(ULP_TX_SC_DSGL) |
+			      ULPTX_NSGE_V(nfrags));
+	if (likely(--nfrags == 0))
+		return;
+	/*
+	 * Most of the complexity below deals with the possibility we hit the
+	 * end of the queue in the middle of writing the SGL.  For this case
+	 * only we create the SGL in a temporary buffer and then copy it.
+	 */
+	to = (u8 *)end > (u8 *)q->stat ? buf : sgl->sge;
+
+	for (i = (nfrags != si->nr_frags); nfrags >= 2; nfrags -= 2, to++) {
+		to->len[0] = cpu_to_be32(skb_frag_size(&si->frags[i]));
+		to->len[1] = cpu_to_be32(skb_frag_size(&si->frags[++i]));
+		to->addr[0] = cpu_to_be64(addr[i]);
+		to->addr[1] = cpu_to_be64(addr[++i]);
+	}
+	if (nfrags) {
+		to->len[0] = cpu_to_be32(skb_frag_size(&si->frags[i]));
+		to->len[1] = cpu_to_be32(0);
+		to->addr[0] = cpu_to_be64(addr[i + 1]);
+	}
+	if (unlikely((u8 *)end > (u8 *)q->stat)) {
+		unsigned int part0 = (u8 *)q->stat - (u8 *)sgl->sge, part1;
+
+		if (likely(part0))
+			memcpy(sgl->sge, buf, part0);
+		part1 = (u8 *)end - (u8 *)q->stat;
+		memcpy(q->desc, (u8 *)buf + part0, part1);
+		end = (void *)q->desc + part1;
+	}
+	if ((uintptr_t)end & 8)           /* 0-pad to multiple of 16 */
+		*end = 0;
+}
+EXPORT_SYMBOL(cxgb4_write_sgl);
+
+/*	cxgb4_write_partial_sgl - populate SGL for partial packet
+ *	@skb: the packet
+ *	@q: the Tx queue we are writing into
+ *	@sgl: starting location for writing the SGL
+ *	@end: points right after the end of the SGL
+ *	@addr: the list of bus addresses for the SGL elements
+ *	@start: start offset in the SKB where partial data starts
+ *	@len: length of data from @start to send out
+ *
+ *	This API will handle sending out partial data of a skb if required.
+ *	Unlike cxgb4_write_sgl, @start can be any offset into the skb data,
+ *	and @len will decide how much data after @start offset to send out.
+ */
+void cxgb4_write_partial_sgl(const struct sk_buff *skb, struct sge_txq *q,
+			     struct ulptx_sgl *sgl, u64 *end,
+			     const dma_addr_t *addr, u32 start, u32 len)
+{
+	struct ulptx_sge_pair buf[MAX_SKB_FRAGS / 2 + 1] = {0}, *to;
+	u32 frag_size, skb_linear_data_len = skb_headlen(skb);
+	struct skb_shared_info *si = skb_shinfo(skb);
+	u8 i = 0, frag_idx = 0, nfrags = 0;
+	skb_frag_t *frag;
+
+	/* Fill the first SGL either from linear data or from partial
+	 * frag based on @start.
+	 */
+	if (unlikely(start < skb_linear_data_len)) {
+		frag_size = min(len, skb_linear_data_len - start);
+		sgl->len0 = htonl(frag_size);
+		sgl->addr0 = cpu_to_be64(addr[0] + start);
+		len -= frag_size;
+		nfrags++;
+	} else {
+		start -= skb_linear_data_len;
+		frag = &si->frags[frag_idx];
+		frag_size = skb_frag_size(frag);
+		/* find the first frag */
+		while (start >= frag_size) {
+			start -= frag_size;
+			frag_idx++;
+			frag = &si->frags[frag_idx];
+			frag_size = skb_frag_size(frag);
+		}
+
+		frag_size = min(len, skb_frag_size(frag) - start);
+		sgl->len0 = cpu_to_be32(frag_size);
+		sgl->addr0 = cpu_to_be64(addr[frag_idx + 1] + start);
+		len -= frag_size;
+		nfrags++;
+		frag_idx++;
+	}
+
+	/* If the entire partial data fit in one SGL, then send it out
+	 * now.
+	 */
+	if (!len)
+		goto done;
+
+	/* Most of the complexity below deals with the possibility we hit the
+	 * end of the queue in the middle of writing the SGL.  For this case
+	 * only we create the SGL in a temporary buffer and then copy it.
+	 */
+	to = (u8 *)end > (u8 *)q->stat ? buf : sgl->sge;
+
+	/* If the skb couldn't fit in first SGL completely, fill the
+	 * rest of the frags in subsequent SGLs. Note that each SGL
+	 * pair can store 2 frags.
+	 */
+	while (len) {
+		frag_size = min(len, skb_frag_size(&si->frags[frag_idx]));
+		to->len[i & 1] = cpu_to_be32(frag_size);
+		to->addr[i & 1] = cpu_to_be64(addr[frag_idx + 1]);
+		if (i && (i & 1))
+			to++;
+		nfrags++;
+		frag_idx++;
+		i++;
+		len -= frag_size;
+	}
+
+	/* If we ended in an odd boundary, then set the second SGL's
+	 * length in the pair to 0.
+	 */
+	if (i & 1)
+		to->len[1] = cpu_to_be32(0);
+
+	/* Copy from temporary buffer to Tx ring, in case we hit the
+	 * end of the queue in the middle of writing the SGL.
+	 */
+	if (unlikely((u8 *)end > (u8 *)q->stat)) {
+		u32 part0 = (u8 *)q->stat - (u8 *)sgl->sge, part1;
+
+		if (likely(part0))
+			memcpy(sgl->sge, buf, part0);
+		part1 = (u8 *)end - (u8 *)q->stat;
+		memcpy(q->desc, (u8 *)buf + part0, part1);
+		end = (void *)q->desc + part1;
+	}
+
+	/* 0-pad to multiple of 16 */
+	if ((uintptr_t)end & 8)
+		*end = 0;
+done:
+	sgl->cmd_nsge = htonl(ULPTX_CMD_V(ULP_TX_SC_DSGL) |
+			ULPTX_NSGE_V(nfrags));
+}
+EXPORT_SYMBOL(cxgb4_write_partial_sgl);
+
+/* This function copies 64 byte coalesced work request to
+ * memory mapped BAR2 space. For coalesced WR SGE fetches
+ * data from the FIFO instead of from Host.
+ */
+static void cxgb_pio_copy(u64 __iomem *dst, u64 *src)
+{
+	int count = 8;
+
+	while (count) {
+		writeq(*src, dst);
+		src++;
+		dst++;
+		count--;
+	}
+}
+
+/**
+ *	cxgb4_ring_tx_db - check and potentially ring a Tx queue's doorbell
+ *	@adap: the adapter
+ *	@q: the Tx queue
+ *	@n: number of new descriptors to give to HW
+ *
+ *	Ring the doorbel for a Tx queue.
+ */
+inline void cxgb4_ring_tx_db(struct adapter *adap, struct sge_txq *q, int n)
+{
+	/* Make sure that all writes to the TX Descriptors are committed
+	 * before we tell the hardware about them.
+	 */
+	wmb();
+
+	/* If we don't have access to the new User Doorbell (T5+), use the old
+	 * doorbell mechanism; otherwise use the new BAR2 mechanism.
+	 */
+	if (unlikely(q->bar2_addr == NULL)) {
+		u32 val = PIDX_V(n);
+		unsigned long flags;
+
+		/* For T4 we need to participate in the Doorbell Recovery
+		 * mechanism.
+		 */
+		spin_lock_irqsave(&q->db_lock, flags);
+		if (!q->db_disabled)
+			t4_write_reg(adap, MYPF_REG(SGE_PF_KDOORBELL_A),
+				     QID_V(q->cntxt_id) | val);
+		else
+			q->db_pidx_inc += n;
+		q->db_pidx = q->pidx;
+		spin_unlock_irqrestore(&q->db_lock, flags);
+	} else {
+		u32 val = PIDX_T5_V(n);
+
+		/* T4 and later chips share the same PIDX field offset within
+		 * the doorbell, but T5 and later shrank the field in order to
+		 * gain a bit for Doorbell Priority.  The field was absurdly
+		 * large in the first place (14 bits) so we just use the T5
+		 * and later limits and warn if a Queue ID is too large.
+		 */
+		WARN_ON(val & DBPRIO_F);
+
+		/* If we're only writing a single TX Descriptor and we can use
+		 * Inferred QID registers, we can use the Write Combining
+		 * Gather Buffer; otherwise we use the simple doorbell.
+		 */
+		if (n == 1 && q->bar2_qid == 0) {
+			int index = (q->pidx
+				     ? (q->pidx - 1)
+				     : (q->size - 1));
+			u64 *wr = (u64 *)&q->desc[index];
+
+			cxgb_pio_copy((u64 __iomem *)
+				      (q->bar2_addr + SGE_UDB_WCDOORBELL),
+				      wr);
+		} else {
+			writel(val | QID_V(q->bar2_qid),
+			       q->bar2_addr + SGE_UDB_KDOORBELL);
+		}
+
+		/* This Write Memory Barrier will force the write to the User
+		 * Doorbell area to be flushed.  This is needed to prevent
+		 * writes on different CPUs for the same queue from hitting
+		 * the adapter out of order.  This is required when some Work
+		 * Requests take the Write Combine Gather Buffer path (user
+		 * doorbell area offset [SGE_UDB_WCDOORBELL..+63]) and some
+		 * take the traditional path where we simply increment the
+		 * PIDX (User Doorbell area SGE_UDB_KDOORBELL) and have the
+		 * hardware DMA read the actual Work Request.
+		 */
+		wmb();
+	}
+}
+EXPORT_SYMBOL(cxgb4_ring_tx_db);
+
+/**
+ *	cxgb4_inline_tx_skb - inline a packet's data into Tx descriptors
+ *	@skb: the packet
+ *	@q: the Tx queue where the packet will be inlined
+ *	@pos: starting position in the Tx queue where to inline the packet
+ *
+ *	Inline a packet's contents directly into Tx descriptors, starting at
+ *	the given position within the Tx DMA ring.
+ *	Most of the complexity of this operation is dealing with wrap arounds
+ *	in the middle of the packet we want to inline.
+ */
+void cxgb4_inline_tx_skb(const struct sk_buff *skb,
+			 const struct sge_txq *q, void *pos)
+{
+	int left = (void *)q->stat - pos;
+	u64 *p;
+
+	if (likely(skb->len <= left)) {
+		if (likely(!skb->data_len))
+			skb_copy_from_linear_data(skb, pos, skb->len);
+		else
+			skb_copy_bits(skb, 0, pos, skb->len);
+		pos += skb->len;
+	} else {
+		skb_copy_bits(skb, 0, pos, left);
+		skb_copy_bits(skb, left, q->desc, skb->len - left);
+		pos = (void *)q->desc + (skb->len - left);
+	}
+
+	/* 0-pad to multiple of 16 */
+	p = PTR_ALIGN(pos, 8);
+	if ((uintptr_t)p & 8)
+		*p = 0;
+}
+EXPORT_SYMBOL(cxgb4_inline_tx_skb);
+
+static void *inline_tx_skb_header(const struct sk_buff *skb,
+				  const struct sge_txq *q,  void *pos,
+				  int length)
+{
+	u64 *p;
+	int left = (void *)q->stat - pos;
+
+	if (likely(length <= left)) {
+		memcpy(pos, skb->data, length);
+		pos += length;
+	} else {
+		memcpy(pos, skb->data, left);
+		memcpy(q->desc, skb->data + left, length - left);
+		pos = (void *)q->desc + (length - left);
+	}
+	/* 0-pad to multiple of 16 */
+	p = PTR_ALIGN(pos, 8);
+	if ((uintptr_t)p & 8) {
+		*p = 0;
+		return p + 1;
+	}
+	return p;
+}
+
+/*
+ * Figure out what HW csum a packet wants and return the appropriate control
+ * bits.
+ */
+static u64 hwcsum(enum chip_type chip, const struct sk_buff *skb)
+{
+	int csum_type;
+	bool inner_hdr_csum = false;
+	u16 proto, ver;
+
+	if (skb->encapsulation &&
+	    (CHELSIO_CHIP_VERSION(chip) > CHELSIO_T5))
+		inner_hdr_csum = true;
+
+	if (inner_hdr_csum) {
+		ver = inner_ip_hdr(skb)->version;
+		proto = (ver == 4) ? inner_ip_hdr(skb)->protocol :
+			inner_ipv6_hdr(skb)->nexthdr;
+	} else {
+		ver = ip_hdr(skb)->version;
+		proto = (ver == 4) ? ip_hdr(skb)->protocol :
+			ipv6_hdr(skb)->nexthdr;
+	}
+
+	if (ver == 4) {
+		if (proto == IPPROTO_TCP)
+			csum_type = TX_CSUM_TCPIP;
+		else if (proto == IPPROTO_UDP)
+			csum_type = TX_CSUM_UDPIP;
+		else {
+nocsum:			/*
+			 * unknown protocol, disable HW csum
+			 * and hope a bad packet is detected
+			 */
+			return TXPKT_L4CSUM_DIS_F;
+		}
+	} else {
+		/*
+		 * this doesn't work with extension headers
+		 */
+		if (proto == IPPROTO_TCP)
+			csum_type = TX_CSUM_TCPIP6;
+		else if (proto == IPPROTO_UDP)
+			csum_type = TX_CSUM_UDPIP6;
+		else
+			goto nocsum;
+	}
+
+	if (likely(csum_type >= TX_CSUM_TCPIP)) {
+		int eth_hdr_len, l4_len;
+		u64 hdr_len;
+
+		if (inner_hdr_csum) {
+			/* This allows checksum offload for all encapsulated
+			 * packets like GRE etc..
+			 */
+			l4_len = skb_inner_network_header_len(skb);
+			eth_hdr_len = skb_inner_network_offset(skb) - ETH_HLEN;
+		} else {
+			l4_len = skb_network_header_len(skb);
+			eth_hdr_len = skb_network_offset(skb) - ETH_HLEN;
+		}
+		hdr_len = TXPKT_IPHDR_LEN_V(l4_len);
+
+		if (CHELSIO_CHIP_VERSION(chip) <= CHELSIO_T5)
+			hdr_len |= TXPKT_ETHHDR_LEN_V(eth_hdr_len);
+		else
+			hdr_len |= T6_TXPKT_ETHHDR_LEN_V(eth_hdr_len);
+		return TXPKT_CSUM_TYPE_V(csum_type) | hdr_len;
+	} else {
+		int start = skb_transport_offset(skb);
+
+		return TXPKT_CSUM_TYPE_V(csum_type) |
+			TXPKT_CSUM_START_V(start) |
+			TXPKT_CSUM_LOC_V(start + skb->csum_offset);
+	}
+}
+
+static void eth_txq_stop(struct sge_eth_txq *q)
+{
+	netif_tx_stop_queue(q->txq);
+	q->q.stops++;
+}
+
+static inline void txq_advance(struct sge_txq *q, unsigned int n)
+{
+	q->in_use += n;
+	q->pidx += n;
+	if (q->pidx >= q->size)
+		q->pidx -= q->size;
+}
+
+#ifdef CONFIG_CHELSIO_T4_FCOE
+static inline int
+cxgb_fcoe_offload(struct sk_buff *skb, struct adapter *adap,
+		  const struct port_info *pi, u64 *cntrl)
+{
+	const struct cxgb_fcoe *fcoe = &pi->fcoe;
+
+	if (!(fcoe->flags & CXGB_FCOE_ENABLED))
+		return 0;
+
+	if (skb->protocol != htons(ETH_P_FCOE))
+		return 0;
+
+	skb_reset_mac_header(skb);
+	skb->mac_len = sizeof(struct ethhdr);
+
+	skb_set_network_header(skb, skb->mac_len);
+	skb_set_transport_header(skb, skb->mac_len + sizeof(struct fcoe_hdr));
+
+	if (!cxgb_fcoe_sof_eof_supported(adap, skb))
+		return -ENOTSUPP;
+
+	/* FC CRC offload */
+	*cntrl = TXPKT_CSUM_TYPE_V(TX_CSUM_FCOE) |
+		     TXPKT_L4CSUM_DIS_F | TXPKT_IPCSUM_DIS_F |
+		     TXPKT_CSUM_START_V(CXGB_FCOE_TXPKT_CSUM_START) |
+		     TXPKT_CSUM_END_V(CXGB_FCOE_TXPKT_CSUM_END) |
+		     TXPKT_CSUM_LOC_V(CXGB_FCOE_TXPKT_CSUM_END);
+	return 0;
+}
+#endif /* CONFIG_CHELSIO_T4_FCOE */
+
+/* Returns tunnel type if hardware supports offloading of the same.
+ * It is called only for T5 and onwards.
+ */
+enum cpl_tx_tnl_lso_type cxgb_encap_offload_supported(struct sk_buff *skb)
+{
+	u8 l4_hdr = 0;
+	enum cpl_tx_tnl_lso_type tnl_type = TX_TNL_TYPE_OPAQUE;
+	struct port_info *pi = netdev_priv(skb->dev);
+	struct adapter *adapter = pi->adapter;
+
+	if (skb->inner_protocol_type != ENCAP_TYPE_ETHER ||
+	    skb->inner_protocol != htons(ETH_P_TEB))
+		return tnl_type;
+
+	switch (vlan_get_protocol(skb)) {
+	case htons(ETH_P_IP):
+		l4_hdr = ip_hdr(skb)->protocol;
+		break;
+	case htons(ETH_P_IPV6):
+		l4_hdr = ipv6_hdr(skb)->nexthdr;
+		break;
+	default:
+		return tnl_type;
+	}
+
+	switch (l4_hdr) {
+	case IPPROTO_UDP:
+		if (adapter->vxlan_port == udp_hdr(skb)->dest)
+			tnl_type = TX_TNL_TYPE_VXLAN;
+		else if (adapter->geneve_port == udp_hdr(skb)->dest)
+			tnl_type = TX_TNL_TYPE_GENEVE;
+		break;
+	default:
+		return tnl_type;
+	}
+
+	return tnl_type;
+}
+
+static inline void t6_fill_tnl_lso(struct sk_buff *skb,
+				   struct cpl_tx_tnl_lso *tnl_lso,
+				   enum cpl_tx_tnl_lso_type tnl_type)
+{
+	u32 val;
+	int in_eth_xtra_len;
+	int l3hdr_len = skb_network_header_len(skb);
+	int eth_xtra_len = skb_network_offset(skb) - ETH_HLEN;
+	const struct skb_shared_info *ssi = skb_shinfo(skb);
+	bool v6 = (ip_hdr(skb)->version == 6);
+
+	val = CPL_TX_TNL_LSO_OPCODE_V(CPL_TX_TNL_LSO) |
+	      CPL_TX_TNL_LSO_FIRST_F |
+	      CPL_TX_TNL_LSO_LAST_F |
+	      (v6 ? CPL_TX_TNL_LSO_IPV6OUT_F : 0) |
+	      CPL_TX_TNL_LSO_ETHHDRLENOUT_V(eth_xtra_len / 4) |
+	      CPL_TX_TNL_LSO_IPHDRLENOUT_V(l3hdr_len / 4) |
+	      (v6 ? 0 : CPL_TX_TNL_LSO_IPHDRCHKOUT_F) |
+	      CPL_TX_TNL_LSO_IPLENSETOUT_F |
+	      (v6 ? 0 : CPL_TX_TNL_LSO_IPIDINCOUT_F);
+	tnl_lso->op_to_IpIdSplitOut = htonl(val);
+
+	tnl_lso->IpIdOffsetOut = 0;
+
+	/* Get the tunnel header length */
+	val = skb_inner_mac_header(skb) - skb_mac_header(skb);
+	in_eth_xtra_len = skb_inner_network_header(skb) -
+			  skb_inner_mac_header(skb) - ETH_HLEN;
+
+	switch (tnl_type) {
+	case TX_TNL_TYPE_VXLAN:
+	case TX_TNL_TYPE_GENEVE:
+		tnl_lso->UdpLenSetOut_to_TnlHdrLen =
+			htons(CPL_TX_TNL_LSO_UDPCHKCLROUT_F |
+			CPL_TX_TNL_LSO_UDPLENSETOUT_F);
+		break;
+	default:
+		tnl_lso->UdpLenSetOut_to_TnlHdrLen = 0;
+		break;
+	}
+
+	tnl_lso->UdpLenSetOut_to_TnlHdrLen |=
+		 htons(CPL_TX_TNL_LSO_TNLHDRLEN_V(val) |
+		       CPL_TX_TNL_LSO_TNLTYPE_V(tnl_type));
+
+	tnl_lso->r1 = 0;
+
+	val = CPL_TX_TNL_LSO_ETHHDRLEN_V(in_eth_xtra_len / 4) |
+	      CPL_TX_TNL_LSO_IPV6_V(inner_ip_hdr(skb)->version == 6) |
+	      CPL_TX_TNL_LSO_IPHDRLEN_V(skb_inner_network_header_len(skb) / 4) |
+	      CPL_TX_TNL_LSO_TCPHDRLEN_V(inner_tcp_hdrlen(skb) / 4);
+	tnl_lso->Flow_to_TcpHdrLen = htonl(val);
+
+	tnl_lso->IpIdOffset = htons(0);
+
+	tnl_lso->IpIdSplit_to_Mss = htons(CPL_TX_TNL_LSO_MSS_V(ssi->gso_size));
+	tnl_lso->TCPSeqOffset = htonl(0);
+	tnl_lso->EthLenOffset_Size = htonl(CPL_TX_TNL_LSO_SIZE_V(skb->len));
+}
+
+static inline void *write_tso_wr(struct adapter *adap, struct sk_buff *skb,
+				 struct cpl_tx_pkt_lso_core *lso)
+{
+	int eth_xtra_len = skb_network_offset(skb) - ETH_HLEN;
+	int l3hdr_len = skb_network_header_len(skb);
+	const struct skb_shared_info *ssi;
+	bool ipv6 = false;
+
+	ssi = skb_shinfo(skb);
+	if (ssi->gso_type & SKB_GSO_TCPV6)
+		ipv6 = true;
+
+	lso->lso_ctrl = htonl(LSO_OPCODE_V(CPL_TX_PKT_LSO) |
+			      LSO_FIRST_SLICE_F | LSO_LAST_SLICE_F |
+			      LSO_IPV6_V(ipv6) |
+			      LSO_ETHHDR_LEN_V(eth_xtra_len / 4) |
+			      LSO_IPHDR_LEN_V(l3hdr_len / 4) |
+			      LSO_TCPHDR_LEN_V(tcp_hdr(skb)->doff));
+	lso->ipid_ofst = htons(0);
+	lso->mss = htons(ssi->gso_size);
+	lso->seqno_offset = htonl(0);
+	if (is_t4(adap->params.chip))
+		lso->len = htonl(skb->len);
+	else
+		lso->len = htonl(LSO_T5_XFER_SIZE_V(skb->len));
+
+	return (void *)(lso + 1);
+}
+
+/**
+ *	t4_sge_eth_txq_egress_update - handle Ethernet TX Queue update
+ *	@adap: the adapter
+ *	@eq: the Ethernet TX Queue
+ *	@maxreclaim: the maximum number of TX Descriptors to reclaim or -1
+ *
+ *	We're typically called here to update the state of an Ethernet TX
+ *	Queue with respect to the hardware's progress in consuming the TX
+ *	Work Requests that we've put on that Egress Queue.  This happens
+ *	when we get Egress Queue Update messages and also prophylactically
+ *	in regular timer-based Ethernet TX Queue maintenance.
+ */
+int t4_sge_eth_txq_egress_update(struct adapter *adap, struct sge_eth_txq *eq,
+				 int maxreclaim)
+{
+	unsigned int reclaimed, hw_cidx;
+	struct sge_txq *q = &eq->q;
+	int hw_in_use;
+
+	if (!q->in_use || !__netif_tx_trylock(eq->txq))
+		return 0;
+
+	/* Reclaim pending completed TX Descriptors. */
+	reclaimed = reclaim_completed_tx(adap, &eq->q, maxreclaim, true);
+
+	hw_cidx = ntohs(READ_ONCE(q->stat->cidx));
+	hw_in_use = q->pidx - hw_cidx;
+	if (hw_in_use < 0)
+		hw_in_use += q->size;
+
+	/* If the TX Queue is currently stopped and there's now more than half
+	 * the queue available, restart it.  Otherwise bail out since the rest
+	 * of what we want do here is with the possibility of shipping any
+	 * currently buffered Coalesced TX Work Request.
+	 */
+	if (netif_tx_queue_stopped(eq->txq) && hw_in_use < (q->size / 2)) {
+		netif_tx_wake_queue(eq->txq);
+		eq->q.restarts++;
+	}
+
+	__netif_tx_unlock(eq->txq);
+	return reclaimed;
+}
+
+static inline int cxgb4_validate_skb(struct sk_buff *skb,
+				     struct net_device *dev,
+				     u32 min_pkt_len)
+{
+	u32 max_pkt_len;
+
+	/* The chip min packet length is 10 octets but some firmware
+	 * commands have a minimum packet length requirement. So, play
+	 * safe and reject anything shorter than @min_pkt_len.
+	 */
+	if (unlikely(skb->len < min_pkt_len))
+		return -EINVAL;
+
+	/* Discard the packet if the length is greater than mtu */
+	max_pkt_len = ETH_HLEN + dev->mtu;
+
+	if (skb_vlan_tagged(skb))
+		max_pkt_len += VLAN_HLEN;
+
+	if (!skb_shinfo(skb)->gso_size && (unlikely(skb->len > max_pkt_len)))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void *write_eo_udp_wr(struct sk_buff *skb, struct fw_eth_tx_eo_wr *wr,
+			     u32 hdr_len)
+{
+	wr->u.udpseg.type = FW_ETH_TX_EO_TYPE_UDPSEG;
+	wr->u.udpseg.ethlen = skb_network_offset(skb);
+	wr->u.udpseg.iplen = cpu_to_be16(skb_network_header_len(skb));
+	wr->u.udpseg.udplen = sizeof(struct udphdr);
+	wr->u.udpseg.rtplen = 0;
+	wr->u.udpseg.r4 = 0;
+	if (skb_shinfo(skb)->gso_size)
+		wr->u.udpseg.mss = cpu_to_be16(skb_shinfo(skb)->gso_size);
+	else
+		wr->u.udpseg.mss = cpu_to_be16(skb->len - hdr_len);
+	wr->u.udpseg.schedpktsize = wr->u.udpseg.mss;
+	wr->u.udpseg.plen = cpu_to_be32(skb->len - hdr_len);
+
+	return (void *)(wr + 1);
+}
+
+/**
+ *	cxgb4_eth_xmit - add a packet to an Ethernet Tx queue
+ *	@skb: the packet
+ *	@dev: the egress net device
+ *
+ *	Add a packet to an SGE Ethernet Tx queue.  Runs with softirqs disabled.
+ */
+static netdev_tx_t cxgb4_eth_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	enum cpl_tx_tnl_lso_type tnl_type = TX_TNL_TYPE_OPAQUE;
+	bool ptp_enabled = is_ptp_enabled(skb, dev);
+	unsigned int last_desc, flits, ndesc;
+	u32 wr_mid, ctrl0, op, sgl_off = 0;
+	const struct skb_shared_info *ssi;
+	int len, qidx, credits, ret, left;
+	struct tx_sw_desc *sgl_sdesc;
+	struct fw_eth_tx_eo_wr *eowr;
+	struct fw_eth_tx_pkt_wr *wr;
+	struct cpl_tx_pkt_core *cpl;
+	const struct port_info *pi;
+	bool immediate = false;
+	u64 cntrl, *end, *sgl;
+	struct sge_eth_txq *q;
+	unsigned int chip_ver;
+	struct adapter *adap;
+
+	ret = cxgb4_validate_skb(skb, dev, ETH_HLEN);
+	if (ret)
+		goto out_free;
+
+	pi = netdev_priv(dev);
+	adap = pi->adapter;
+	ssi = skb_shinfo(skb);
+#if IS_ENABLED(CONFIG_CHELSIO_IPSEC_INLINE)
+	if (xfrm_offload(skb) && !ssi->gso_size)
+		return adap->uld[CXGB4_ULD_IPSEC].tx_handler(skb, dev);
+#endif /* CHELSIO_IPSEC_INLINE */
+
+#if IS_ENABLED(CONFIG_CHELSIO_TLS_DEVICE)
+	if (cxgb4_is_ktls_skb(skb) &&
+	    (skb->len - skb_tcp_all_headers(skb)))
+		return adap->uld[CXGB4_ULD_KTLS].tx_handler(skb, dev);
+#endif /* CHELSIO_TLS_DEVICE */
+
+	qidx = skb_get_queue_mapping(skb);
+	if (ptp_enabled) {
+		if (!(adap->ptp_tx_skb)) {
+			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+			adap->ptp_tx_skb = skb_get(skb);
+		} else {
+			goto out_free;
+		}
+		q = &adap->sge.ptptxq;
+	} else {
+		q = &adap->sge.ethtxq[qidx + pi->first_qset];
+	}
+	skb_tx_timestamp(skb);
+
+	reclaim_completed_tx(adap, &q->q, -1, true);
+	cntrl = TXPKT_L4CSUM_DIS_F | TXPKT_IPCSUM_DIS_F;
+
+#ifdef CONFIG_CHELSIO_T4_FCOE
+	ret = cxgb_fcoe_offload(skb, adap, pi, &cntrl);
+	if (unlikely(ret == -EOPNOTSUPP))
+		goto out_free;
+#endif /* CONFIG_CHELSIO_T4_FCOE */
+
+	chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
+	flits = calc_tx_flits(skb, chip_ver);
+	ndesc = flits_to_desc(flits);
+	credits = txq_avail(&q->q) - ndesc;
+
+	if (unlikely(credits < 0)) {
+		eth_txq_stop(q);
+		dev_err(adap->pdev_dev,
+			"%s: Tx ring %u full while queue awake!\n",
+			dev->name, qidx);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (is_eth_imm(skb, chip_ver))
+		immediate = true;
+
+	if (skb->encapsulation && chip_ver > CHELSIO_T5)
+		tnl_type = cxgb_encap_offload_supported(skb);
+
+	last_desc = q->q.pidx + ndesc - 1;
+	if (last_desc >= q->q.size)
+		last_desc -= q->q.size;
+	sgl_sdesc = &q->q.sdesc[last_desc];
+
+	if (!immediate &&
+	    unlikely(cxgb4_map_skb(adap->pdev_dev, skb, sgl_sdesc->addr) < 0)) {
+		memset(sgl_sdesc->addr, 0, sizeof(sgl_sdesc->addr));
+		q->mapping_err++;
+		goto out_free;
+	}
+
+	wr_mid = FW_WR_LEN16_V(DIV_ROUND_UP(flits, 2));
+	if (unlikely(credits < ETHTXQ_STOP_THRES)) {
+		/* After we're done injecting the Work Request for this
+		 * packet, we'll be below our "stop threshold" so stop the TX
+		 * Queue now and schedule a request for an SGE Egress Queue
+		 * Update message. The queue will get started later on when
+		 * the firmware processes this Work Request and sends us an
+		 * Egress Queue Status Update message indicating that space
+		 * has opened up.
+		 */
+		eth_txq_stop(q);
+		if (chip_ver > CHELSIO_T5)
+			wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F;
+	}
+
+	wr = (void *)&q->q.desc[q->q.pidx];
+	eowr = (void *)&q->q.desc[q->q.pidx];
+	wr->equiq_to_len16 = htonl(wr_mid);
+	wr->r3 = cpu_to_be64(0);
+	if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4)
+		end = (u64 *)eowr + flits;
+	else
+		end = (u64 *)wr + flits;
+
+	len = immediate ? skb->len : 0;
+	len += sizeof(*cpl);
+	if (ssi->gso_size && !(ssi->gso_type & SKB_GSO_UDP_L4)) {
+		struct cpl_tx_pkt_lso_core *lso = (void *)(wr + 1);
+		struct cpl_tx_tnl_lso *tnl_lso = (void *)(wr + 1);
+
+		if (tnl_type)
+			len += sizeof(*tnl_lso);
+		else
+			len += sizeof(*lso);
+
+		wr->op_immdlen = htonl(FW_WR_OP_V(FW_ETH_TX_PKT_WR) |
+				       FW_WR_IMMDLEN_V(len));
+		if (tnl_type) {
+			struct iphdr *iph = ip_hdr(skb);
+
+			t6_fill_tnl_lso(skb, tnl_lso, tnl_type);
+			cpl = (void *)(tnl_lso + 1);
+			/* Driver is expected to compute partial checksum that
+			 * does not include the IP Total Length.
+			 */
+			if (iph->version == 4) {
+				iph->check = 0;
+				iph->tot_len = 0;
+				iph->check = ~ip_fast_csum((u8 *)iph, iph->ihl);
+			}
+			if (skb->ip_summed == CHECKSUM_PARTIAL)
+				cntrl = hwcsum(adap->params.chip, skb);
+		} else {
+			cpl = write_tso_wr(adap, skb, lso);
+			cntrl = hwcsum(adap->params.chip, skb);
+		}
+		sgl = (u64 *)(cpl + 1); /* sgl start here */
+		q->tso++;
+		q->tx_cso += ssi->gso_segs;
+	} else if (ssi->gso_size) {
+		u64 *start;
+		u32 hdrlen;
+
+		hdrlen = eth_get_headlen(dev, skb->data, skb_headlen(skb));
+		len += hdrlen;
+		wr->op_immdlen = cpu_to_be32(FW_WR_OP_V(FW_ETH_TX_EO_WR) |
+					     FW_ETH_TX_EO_WR_IMMDLEN_V(len));
+		cpl = write_eo_udp_wr(skb, eowr, hdrlen);
+		cntrl = hwcsum(adap->params.chip, skb);
+
+		start = (u64 *)(cpl + 1);
+		sgl = (u64 *)inline_tx_skb_header(skb, &q->q, (void *)start,
+						  hdrlen);
+		if (unlikely(start > sgl)) {
+			left = (u8 *)end - (u8 *)q->q.stat;
+			end = (void *)q->q.desc + left;
+		}
+		sgl_off = hdrlen;
+		q->uso++;
+		q->tx_cso += ssi->gso_segs;
+	} else {
+		if (ptp_enabled)
+			op = FW_PTP_TX_PKT_WR;
+		else
+			op = FW_ETH_TX_PKT_WR;
+		wr->op_immdlen = htonl(FW_WR_OP_V(op) |
+				       FW_WR_IMMDLEN_V(len));
+		cpl = (void *)(wr + 1);
+		sgl = (u64 *)(cpl + 1);
+		if (skb->ip_summed == CHECKSUM_PARTIAL) {
+			cntrl = hwcsum(adap->params.chip, skb) |
+				TXPKT_IPCSUM_DIS_F;
+			q->tx_cso++;
+		}
+	}
+
+	if (unlikely((u8 *)sgl >= (u8 *)q->q.stat)) {
+		/* If current position is already at the end of the
+		 * txq, reset the current to point to start of the queue
+		 * and update the end ptr as well.
+		 */
+		left = (u8 *)end - (u8 *)q->q.stat;
+		end = (void *)q->q.desc + left;
+		sgl = (void *)q->q.desc;
+	}
+
+	if (skb_vlan_tag_present(skb)) {
+		q->vlan_ins++;
+		cntrl |= TXPKT_VLAN_VLD_F | TXPKT_VLAN_V(skb_vlan_tag_get(skb));
+#ifdef CONFIG_CHELSIO_T4_FCOE
+		if (skb->protocol == htons(ETH_P_FCOE))
+			cntrl |= TXPKT_VLAN_V(
+				 ((skb->priority & 0x7) << VLAN_PRIO_SHIFT));
+#endif /* CONFIG_CHELSIO_T4_FCOE */
+	}
+
+	ctrl0 = TXPKT_OPCODE_V(CPL_TX_PKT_XT) | TXPKT_INTF_V(pi->tx_chan) |
+		TXPKT_PF_V(adap->pf);
+	if (ptp_enabled)
+		ctrl0 |= TXPKT_TSTAMP_F;
+#ifdef CONFIG_CHELSIO_T4_DCB
+	if (is_t4(adap->params.chip))
+		ctrl0 |= TXPKT_OVLAN_IDX_V(q->dcb_prio);
+	else
+		ctrl0 |= TXPKT_T5_OVLAN_IDX_V(q->dcb_prio);
+#endif
+	cpl->ctrl0 = htonl(ctrl0);
+	cpl->pack = htons(0);
+	cpl->len = htons(skb->len);
+	cpl->ctrl1 = cpu_to_be64(cntrl);
+
+	if (immediate) {
+		cxgb4_inline_tx_skb(skb, &q->q, sgl);
+		dev_consume_skb_any(skb);
+	} else {
+		cxgb4_write_sgl(skb, &q->q, (void *)sgl, end, sgl_off,
+				sgl_sdesc->addr);
+		skb_orphan(skb);
+		sgl_sdesc->skb = skb;
+	}
+
+	txq_advance(&q->q, ndesc);
+
+	cxgb4_ring_tx_db(adap, &q->q, ndesc);
+	return NETDEV_TX_OK;
+
+out_free:
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
+
+/* Constants ... */
+enum {
+	/* Egress Queue sizes, producer and consumer indices are all in units
+	 * of Egress Context Units bytes.  Note that as far as the hardware is
+	 * concerned, the free list is an Egress Queue (the host produces free
+	 * buffers which the hardware consumes) and free list entries are
+	 * 64-bit PCI DMA addresses.
+	 */
+	EQ_UNIT = SGE_EQ_IDXSIZE,
+	FL_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64),
+	TXD_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64),
+
+	T4VF_ETHTXQ_MAX_HDR = (sizeof(struct fw_eth_tx_pkt_vm_wr) +
+			       sizeof(struct cpl_tx_pkt_lso_core) +
+			       sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64),
+};
+
+/**
+ *	t4vf_is_eth_imm - can an Ethernet packet be sent as immediate data?
+ *	@skb: the packet
+ *
+ *	Returns whether an Ethernet packet is small enough to fit completely as
+ *	immediate data.
+ */
+static inline int t4vf_is_eth_imm(const struct sk_buff *skb)
+{
+	/* The VF Driver uses the FW_ETH_TX_PKT_VM_WR firmware Work Request
+	 * which does not accommodate immediate data.  We could dike out all
+	 * of the support code for immediate data but that would tie our hands
+	 * too much if we ever want to enhace the firmware.  It would also
+	 * create more differences between the PF and VF Drivers.
+	 */
+	return false;
+}
+
+/**
+ *	t4vf_calc_tx_flits - calculate the number of flits for a packet TX WR
+ *	@skb: the packet
+ *
+ *	Returns the number of flits needed for a TX Work Request for the
+ *	given Ethernet packet, including the needed WR and CPL headers.
+ */
+static inline unsigned int t4vf_calc_tx_flits(const struct sk_buff *skb)
+{
+	unsigned int flits;
+
+	/* If the skb is small enough, we can pump it out as a work request
+	 * with only immediate data.  In that case we just have to have the
+	 * TX Packet header plus the skb data in the Work Request.
+	 */
+	if (t4vf_is_eth_imm(skb))
+		return DIV_ROUND_UP(skb->len + sizeof(struct cpl_tx_pkt),
+				    sizeof(__be64));
+
+	/* Otherwise, we're going to have to construct a Scatter gather list
+	 * of the skb body and fragments.  We also include the flits necessary
+	 * for the TX Packet Work Request and CPL.  We always have a firmware
+	 * Write Header (incorporated as part of the cpl_tx_pkt_lso and
+	 * cpl_tx_pkt structures), followed by either a TX Packet Write CPL
+	 * message or, if we're doing a Large Send Offload, an LSO CPL message
+	 * with an embedded TX Packet Write CPL message.
+	 */
+	flits = sgl_len(skb_shinfo(skb)->nr_frags + 1);
+	if (skb_shinfo(skb)->gso_size)
+		flits += (sizeof(struct fw_eth_tx_pkt_vm_wr) +
+			  sizeof(struct cpl_tx_pkt_lso_core) +
+			  sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
+	else
+		flits += (sizeof(struct fw_eth_tx_pkt_vm_wr) +
+			  sizeof(struct cpl_tx_pkt_core)) / sizeof(__be64);
+	return flits;
+}
+
+/**
+ *	cxgb4_vf_eth_xmit - add a packet to an Ethernet TX queue
+ *	@skb: the packet
+ *	@dev: the egress net device
+ *
+ *	Add a packet to an SGE Ethernet TX queue.  Runs with softirqs disabled.
+ */
+static netdev_tx_t cxgb4_vf_eth_xmit(struct sk_buff *skb,
+				     struct net_device *dev)
+{
+	unsigned int last_desc, flits, ndesc;
+	const struct skb_shared_info *ssi;
+	struct fw_eth_tx_pkt_vm_wr *wr;
+	struct tx_sw_desc *sgl_sdesc;
+	struct cpl_tx_pkt_core *cpl;
+	const struct port_info *pi;
+	struct sge_eth_txq *txq;
+	struct adapter *adapter;
+	int qidx, credits, ret;
+	size_t fw_hdr_copy_len;
+	unsigned int chip_ver;
+	u64 cntrl, *end;
+	u32 wr_mid;
+
+	/* The chip minimum packet length is 10 octets but the firmware
+	 * command that we are using requires that we copy the Ethernet header
+	 * (including the VLAN tag) into the header so we reject anything
+	 * smaller than that ...
+	 */
+	BUILD_BUG_ON(sizeof(wr->firmware) !=
+		     (sizeof(wr->ethmacdst) + sizeof(wr->ethmacsrc) +
+		      sizeof(wr->ethtype) + sizeof(wr->vlantci)));
+	fw_hdr_copy_len = sizeof(wr->firmware);
+	ret = cxgb4_validate_skb(skb, dev, fw_hdr_copy_len);
+	if (ret)
+		goto out_free;
+
+	/* Figure out which TX Queue we're going to use. */
+	pi = netdev_priv(dev);
+	adapter = pi->adapter;
+	qidx = skb_get_queue_mapping(skb);
+	WARN_ON(qidx >= pi->nqsets);
+	txq = &adapter->sge.ethtxq[pi->first_qset + qidx];
+
+	/* Take this opportunity to reclaim any TX Descriptors whose DMA
+	 * transfers have completed.
+	 */
+	reclaim_completed_tx(adapter, &txq->q, -1, true);
+
+	/* Calculate the number of flits and TX Descriptors we're going to
+	 * need along with how many TX Descriptors will be left over after
+	 * we inject our Work Request.
+	 */
+	flits = t4vf_calc_tx_flits(skb);
+	ndesc = flits_to_desc(flits);
+	credits = txq_avail(&txq->q) - ndesc;
+
+	if (unlikely(credits < 0)) {
+		/* Not enough room for this packet's Work Request.  Stop the
+		 * TX Queue and return a "busy" condition.  The queue will get
+		 * started later on when the firmware informs us that space
+		 * has opened up.
+		 */
+		eth_txq_stop(txq);
+		dev_err(adapter->pdev_dev,
+			"%s: TX ring %u full while queue awake!\n",
+			dev->name, qidx);
+		return NETDEV_TX_BUSY;
+	}
+
+	last_desc = txq->q.pidx + ndesc - 1;
+	if (last_desc >= txq->q.size)
+		last_desc -= txq->q.size;
+	sgl_sdesc = &txq->q.sdesc[last_desc];
+
+	if (!t4vf_is_eth_imm(skb) &&
+	    unlikely(cxgb4_map_skb(adapter->pdev_dev, skb,
+				   sgl_sdesc->addr) < 0)) {
+		/* We need to map the skb into PCI DMA space (because it can't
+		 * be in-lined directly into the Work Request) and the mapping
+		 * operation failed.  Record the error and drop the packet.
+		 */
+		memset(sgl_sdesc->addr, 0, sizeof(sgl_sdesc->addr));
+		txq->mapping_err++;
+		goto out_free;
+	}
+
+	chip_ver = CHELSIO_CHIP_VERSION(adapter->params.chip);
+	wr_mid = FW_WR_LEN16_V(DIV_ROUND_UP(flits, 2));
+	if (unlikely(credits < ETHTXQ_STOP_THRES)) {
+		/* After we're done injecting the Work Request for this
+		 * packet, we'll be below our "stop threshold" so stop the TX
+		 * Queue now and schedule a request for an SGE Egress Queue
+		 * Update message.  The queue will get started later on when
+		 * the firmware processes this Work Request and sends us an
+		 * Egress Queue Status Update message indicating that space
+		 * has opened up.
+		 */
+		eth_txq_stop(txq);
+		if (chip_ver > CHELSIO_T5)
+			wr_mid |= FW_WR_EQUEQ_F | FW_WR_EQUIQ_F;
+	}
+
+	/* Start filling in our Work Request.  Note that we do _not_ handle
+	 * the WR Header wrapping around the TX Descriptor Ring.  If our
+	 * maximum header size ever exceeds one TX Descriptor, we'll need to
+	 * do something else here.
+	 */
+	WARN_ON(DIV_ROUND_UP(T4VF_ETHTXQ_MAX_HDR, TXD_PER_EQ_UNIT) > 1);
+	wr = (void *)&txq->q.desc[txq->q.pidx];
+	wr->equiq_to_len16 = cpu_to_be32(wr_mid);
+	wr->r3[0] = cpu_to_be32(0);
+	wr->r3[1] = cpu_to_be32(0);
+	skb_copy_from_linear_data(skb, &wr->firmware, fw_hdr_copy_len);
+	end = (u64 *)wr + flits;
+
+	/* If this is a Large Send Offload packet we'll put in an LSO CPL
+	 * message with an encapsulated TX Packet CPL message.  Otherwise we
+	 * just use a TX Packet CPL message.
+	 */
+	ssi = skb_shinfo(skb);
+	if (ssi->gso_size) {
+		struct cpl_tx_pkt_lso_core *lso = (void *)(wr + 1);
+		bool v6 = (ssi->gso_type & SKB_GSO_TCPV6) != 0;
+		int l3hdr_len = skb_network_header_len(skb);
+		int eth_xtra_len = skb_network_offset(skb) - ETH_HLEN;
+
+		wr->op_immdlen =
+			cpu_to_be32(FW_WR_OP_V(FW_ETH_TX_PKT_VM_WR) |
+				    FW_WR_IMMDLEN_V(sizeof(*lso) +
+						    sizeof(*cpl)));
+		 /* Fill in the LSO CPL message. */
+		lso->lso_ctrl =
+			cpu_to_be32(LSO_OPCODE_V(CPL_TX_PKT_LSO) |
+				    LSO_FIRST_SLICE_F |
+				    LSO_LAST_SLICE_F |
+				    LSO_IPV6_V(v6) |
+				    LSO_ETHHDR_LEN_V(eth_xtra_len / 4) |
+				    LSO_IPHDR_LEN_V(l3hdr_len / 4) |
+				    LSO_TCPHDR_LEN_V(tcp_hdr(skb)->doff));
+		lso->ipid_ofst = cpu_to_be16(0);
+		lso->mss = cpu_to_be16(ssi->gso_size);
+		lso->seqno_offset = cpu_to_be32(0);
+		if (is_t4(adapter->params.chip))
+			lso->len = cpu_to_be32(skb->len);
+		else
+			lso->len = cpu_to_be32(LSO_T5_XFER_SIZE_V(skb->len));
+
+		/* Set up TX Packet CPL pointer, control word and perform
+		 * accounting.
+		 */
+		cpl = (void *)(lso + 1);
+
+		if (chip_ver <= CHELSIO_T5)
+			cntrl = TXPKT_ETHHDR_LEN_V(eth_xtra_len);
+		else
+			cntrl = T6_TXPKT_ETHHDR_LEN_V(eth_xtra_len);
+
+		cntrl |= TXPKT_CSUM_TYPE_V(v6 ?
+					   TX_CSUM_TCPIP6 : TX_CSUM_TCPIP) |
+			 TXPKT_IPHDR_LEN_V(l3hdr_len);
+		txq->tso++;
+		txq->tx_cso += ssi->gso_segs;
+	} else {
+		int len;
+
+		len = (t4vf_is_eth_imm(skb)
+		       ? skb->len + sizeof(*cpl)
+		       : sizeof(*cpl));
+		wr->op_immdlen =
+			cpu_to_be32(FW_WR_OP_V(FW_ETH_TX_PKT_VM_WR) |
+				    FW_WR_IMMDLEN_V(len));
+
+		/* Set up TX Packet CPL pointer, control word and perform
+		 * accounting.
+		 */
+		cpl = (void *)(wr + 1);
+		if (skb->ip_summed == CHECKSUM_PARTIAL) {
+			cntrl = hwcsum(adapter->params.chip, skb) |
+				TXPKT_IPCSUM_DIS_F;
+			txq->tx_cso++;
+		} else {
+			cntrl = TXPKT_L4CSUM_DIS_F | TXPKT_IPCSUM_DIS_F;
+		}
+	}
+
+	/* If there's a VLAN tag present, add that to the list of things to
+	 * do in this Work Request.
+	 */
+	if (skb_vlan_tag_present(skb)) {
+		txq->vlan_ins++;
+		cntrl |= TXPKT_VLAN_VLD_F | TXPKT_VLAN_V(skb_vlan_tag_get(skb));
+	}
+
+	 /* Fill in the TX Packet CPL message header. */
+	cpl->ctrl0 = cpu_to_be32(TXPKT_OPCODE_V(CPL_TX_PKT_XT) |
+				 TXPKT_INTF_V(pi->port_id) |
+				 TXPKT_PF_V(0));
+	cpl->pack = cpu_to_be16(0);
+	cpl->len = cpu_to_be16(skb->len);
+	cpl->ctrl1 = cpu_to_be64(cntrl);
+
+	/* Fill in the body of the TX Packet CPL message with either in-lined
+	 * data or a Scatter/Gather List.
+	 */
+	if (t4vf_is_eth_imm(skb)) {
+		/* In-line the packet's data and free the skb since we don't
+		 * need it any longer.
+		 */
+		cxgb4_inline_tx_skb(skb, &txq->q, cpl + 1);
+		dev_consume_skb_any(skb);
+	} else {
+		/* Write the skb's Scatter/Gather list into the TX Packet CPL
+		 * message and retain a pointer to the skb so we can free it
+		 * later when its DMA completes.  (We store the skb pointer
+		 * in the Software Descriptor corresponding to the last TX
+		 * Descriptor used by the Work Request.)
+		 *
+		 * The retained skb will be freed when the corresponding TX
+		 * Descriptors are reclaimed after their DMAs complete.
+		 * However, this could take quite a while since, in general,
+		 * the hardware is set up to be lazy about sending DMA
+		 * completion notifications to us and we mostly perform TX
+		 * reclaims in the transmit routine.
+		 *
+		 * This is good for performamce but means that we rely on new
+		 * TX packets arriving to run the destructors of completed
+		 * packets, which open up space in their sockets' send queues.
+		 * Sometimes we do not get such new packets causing TX to
+		 * stall.  A single UDP transmitter is a good example of this
+		 * situation.  We have a clean up timer that periodically
+		 * reclaims completed packets but it doesn't run often enough
+		 * (nor do we want it to) to prevent lengthy stalls.  A
+		 * solution to this problem is to run the destructor early,
+		 * after the packet is queued but before it's DMAd.  A con is
+		 * that we lie to socket memory accounting, but the amount of
+		 * extra memory is reasonable (limited by the number of TX
+		 * descriptors), the packets do actually get freed quickly by
+		 * new packets almost always, and for protocols like TCP that
+		 * wait for acks to really free up the data the extra memory
+		 * is even less.  On the positive side we run the destructors
+		 * on the sending CPU rather than on a potentially different
+		 * completing CPU, usually a good thing.
+		 *
+		 * Run the destructor before telling the DMA engine about the
+		 * packet to make sure it doesn't complete and get freed
+		 * prematurely.
+		 */
+		struct ulptx_sgl *sgl = (struct ulptx_sgl *)(cpl + 1);
+		struct sge_txq *tq = &txq->q;
+
+		/* If the Work Request header was an exact multiple of our TX
+		 * Descriptor length, then it's possible that the starting SGL
+		 * pointer lines up exactly with the end of our TX Descriptor
+		 * ring.  If that's the case, wrap around to the beginning
+		 * here ...
+		 */
+		if (unlikely((void *)sgl == (void *)tq->stat)) {
+			sgl = (void *)tq->desc;
+			end = (void *)((void *)tq->desc +
+				       ((void *)end - (void *)tq->stat));
+		}
+
+		cxgb4_write_sgl(skb, tq, sgl, end, 0, sgl_sdesc->addr);
+		skb_orphan(skb);
+		sgl_sdesc->skb = skb;
+	}
+
+	/* Advance our internal TX Queue state, tell the hardware about
+	 * the new TX descriptors and return success.
+	 */
+	txq_advance(&txq->q, ndesc);
+
+	cxgb4_ring_tx_db(adapter, &txq->q, ndesc);
+	return NETDEV_TX_OK;
+
+out_free:
+	/* An error of some sort happened.  Free the TX skb and tell the
+	 * OS that we've "dealt" with the packet ...
+	 */
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
+
+/**
+ * reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
+ * @q: the SGE control Tx queue
+ *
+ * This is a variant of cxgb4_reclaim_completed_tx() that is used
+ * for Tx queues that send only immediate data (presently just
+ * the control queues) and	thus do not have any sk_buffs to release.
+ */
+static inline void reclaim_completed_tx_imm(struct sge_txq *q)
+{
+	int hw_cidx = ntohs(READ_ONCE(q->stat->cidx));
+	int reclaim = hw_cidx - q->cidx;
+
+	if (reclaim < 0)
+		reclaim += q->size;
+
+	q->in_use -= reclaim;
+	q->cidx = hw_cidx;
+}
+
+static inline void eosw_txq_advance_index(u32 *idx, u32 n, u32 max)
+{
+	u32 val = *idx + n;
+
+	if (val >= max)
+		val -= max;
+
+	*idx = val;
+}
+
+void cxgb4_eosw_txq_free_desc(struct adapter *adap,
+			      struct sge_eosw_txq *eosw_txq, u32 ndesc)
+{
+	struct tx_sw_desc *d;
+
+	d = &eosw_txq->desc[eosw_txq->last_cidx];
+	while (ndesc--) {
+		if (d->skb) {
+			if (d->addr[0]) {
+				unmap_skb(adap->pdev_dev, d->skb, d->addr);
+				memset(d->addr, 0, sizeof(d->addr));
+			}
+			dev_consume_skb_any(d->skb);
+			d->skb = NULL;
+		}
+		eosw_txq_advance_index(&eosw_txq->last_cidx, 1,
+				       eosw_txq->ndesc);
+		d = &eosw_txq->desc[eosw_txq->last_cidx];
+	}
+}
+
+static inline void eosw_txq_advance(struct sge_eosw_txq *eosw_txq, u32 n)
+{
+	eosw_txq_advance_index(&eosw_txq->pidx, n, eosw_txq->ndesc);
+	eosw_txq->inuse += n;
+}
+
+static inline int eosw_txq_enqueue(struct sge_eosw_txq *eosw_txq,
+				   struct sk_buff *skb)
+{
+	if (eosw_txq->inuse == eosw_txq->ndesc)
+		return -ENOMEM;
+
+	eosw_txq->desc[eosw_txq->pidx].skb = skb;
+	return 0;
+}
+
+static inline struct sk_buff *eosw_txq_peek(struct sge_eosw_txq *eosw_txq)
+{
+	return eosw_txq->desc[eosw_txq->last_pidx].skb;
+}
+
+static inline u8 ethofld_calc_tx_flits(struct adapter *adap,
+				       struct sk_buff *skb, u32 hdr_len)
+{
+	u8 flits, nsgl = 0;
+	u32 wrlen;
+
+	wrlen = sizeof(struct fw_eth_tx_eo_wr) + sizeof(struct cpl_tx_pkt_core);
+	if (skb_shinfo(skb)->gso_size &&
+	    !(skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4))
+		wrlen += sizeof(struct cpl_tx_pkt_lso_core);
+
+	wrlen += roundup(hdr_len, 16);
+
+	/* Packet headers + WR + CPLs */
+	flits = DIV_ROUND_UP(wrlen, 8);
+
+	if (skb_shinfo(skb)->nr_frags > 0) {
+		if (skb_headlen(skb) - hdr_len)
+			nsgl = sgl_len(skb_shinfo(skb)->nr_frags + 1);
+		else
+			nsgl = sgl_len(skb_shinfo(skb)->nr_frags);
+	} else if (skb->len - hdr_len) {
+		nsgl = sgl_len(1);
+	}
+
+	return flits + nsgl;
+}
+
+static void *write_eo_wr(struct adapter *adap, struct sge_eosw_txq *eosw_txq,
+			 struct sk_buff *skb, struct fw_eth_tx_eo_wr *wr,
+			 u32 hdr_len, u32 wrlen)
+{
+	const struct skb_shared_info *ssi = skb_shinfo(skb);
+	struct cpl_tx_pkt_core *cpl;
+	u32 immd_len, wrlen16;
+	bool compl = false;
+	u8 ver, proto;
+
+	ver = ip_hdr(skb)->version;
+	proto = (ver == 6) ? ipv6_hdr(skb)->nexthdr : ip_hdr(skb)->protocol;
+
+	wrlen16 = DIV_ROUND_UP(wrlen, 16);
+	immd_len = sizeof(struct cpl_tx_pkt_core);
+	if (skb_shinfo(skb)->gso_size &&
+	    !(skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4))
+		immd_len += sizeof(struct cpl_tx_pkt_lso_core);
+	immd_len += hdr_len;
+
+	if (!eosw_txq->ncompl ||
+	    (eosw_txq->last_compl + wrlen16) >=
+	    (adap->params.ofldq_wr_cred / 2)) {
+		compl = true;
+		eosw_txq->ncompl++;
+		eosw_txq->last_compl = 0;
+	}
+
+	wr->op_immdlen = cpu_to_be32(FW_WR_OP_V(FW_ETH_TX_EO_WR) |
+				     FW_ETH_TX_EO_WR_IMMDLEN_V(immd_len) |
+				     FW_WR_COMPL_V(compl));
+	wr->equiq_to_len16 = cpu_to_be32(FW_WR_LEN16_V(wrlen16) |
+					 FW_WR_FLOWID_V(eosw_txq->hwtid));
+	wr->r3 = 0;
+	if (proto == IPPROTO_UDP) {
+		cpl = write_eo_udp_wr(skb, wr, hdr_len);
+	} else {
+		wr->u.tcpseg.type = FW_ETH_TX_EO_TYPE_TCPSEG;
+		wr->u.tcpseg.ethlen = skb_network_offset(skb);
+		wr->u.tcpseg.iplen = cpu_to_be16(skb_network_header_len(skb));
+		wr->u.tcpseg.tcplen = tcp_hdrlen(skb);
+		wr->u.tcpseg.tsclk_tsoff = 0;
+		wr->u.tcpseg.r4 = 0;
+		wr->u.tcpseg.r5 = 0;
+		wr->u.tcpseg.plen = cpu_to_be32(skb->len - hdr_len);
+
+		if (ssi->gso_size) {
+			struct cpl_tx_pkt_lso_core *lso = (void *)(wr + 1);
+
+			wr->u.tcpseg.mss = cpu_to_be16(ssi->gso_size);
+			cpl = write_tso_wr(adap, skb, lso);
+		} else {
+			wr->u.tcpseg.mss = cpu_to_be16(0xffff);
+			cpl = (void *)(wr + 1);
+		}
+	}
+
+	eosw_txq->cred -= wrlen16;
+	eosw_txq->last_compl += wrlen16;
+	return cpl;
+}
+
+static int ethofld_hard_xmit(struct net_device *dev,
+			     struct sge_eosw_txq *eosw_txq)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = netdev2adap(dev);
+	u32 wrlen, wrlen16, hdr_len, data_len;
+	enum sge_eosw_state next_state;
+	u64 cntrl, *start, *end, *sgl;
+	struct sge_eohw_txq *eohw_txq;
+	struct cpl_tx_pkt_core *cpl;
+	struct fw_eth_tx_eo_wr *wr;
+	bool skip_eotx_wr = false;
+	struct tx_sw_desc *d;
+	struct sk_buff *skb;
+	int left, ret = 0;
+	u8 flits, ndesc;
+
+	eohw_txq = &adap->sge.eohw_txq[eosw_txq->hwqid];
+	spin_lock(&eohw_txq->lock);
+	reclaim_completed_tx_imm(&eohw_txq->q);
+
+	d = &eosw_txq->desc[eosw_txq->last_pidx];
+	skb = d->skb;
+	skb_tx_timestamp(skb);
+
+	wr = (struct fw_eth_tx_eo_wr *)&eohw_txq->q.desc[eohw_txq->q.pidx];
+	if (unlikely(eosw_txq->state != CXGB4_EO_STATE_ACTIVE &&
+		     eosw_txq->last_pidx == eosw_txq->flowc_idx)) {
+		hdr_len = skb->len;
+		data_len = 0;
+		flits = DIV_ROUND_UP(hdr_len, 8);
+		if (eosw_txq->state == CXGB4_EO_STATE_FLOWC_OPEN_SEND)
+			next_state = CXGB4_EO_STATE_FLOWC_OPEN_REPLY;
+		else
+			next_state = CXGB4_EO_STATE_FLOWC_CLOSE_REPLY;
+		skip_eotx_wr = true;
+	} else {
+		hdr_len = eth_get_headlen(dev, skb->data, skb_headlen(skb));
+		data_len = skb->len - hdr_len;
+		flits = ethofld_calc_tx_flits(adap, skb, hdr_len);
+	}
+	ndesc = flits_to_desc(flits);
+	wrlen = flits * 8;
+	wrlen16 = DIV_ROUND_UP(wrlen, 16);
+
+	left = txq_avail(&eohw_txq->q) - ndesc;
+
+	/* If there are no descriptors left in hardware queues or no
+	 * CPL credits left in software queues, then wait for them
+	 * to come back and retry again. Note that we always request
+	 * for credits update via interrupt for every half credits
+	 * consumed. So, the interrupt will eventually restore the
+	 * credits and invoke the Tx path again.
+	 */
+	if (unlikely(left < 0 || wrlen16 > eosw_txq->cred)) {
+		ret = -ENOMEM;
+		goto out_unlock;
+	}
+
+	if (unlikely(skip_eotx_wr)) {
+		start = (u64 *)wr;
+		eosw_txq->state = next_state;
+		eosw_txq->cred -= wrlen16;
+		eosw_txq->ncompl++;
+		eosw_txq->last_compl = 0;
+		goto write_wr_headers;
+	}
+
+	cpl = write_eo_wr(adap, eosw_txq, skb, wr, hdr_len, wrlen);
+	cntrl = hwcsum(adap->params.chip, skb);
+	if (skb_vlan_tag_present(skb))
+		cntrl |= TXPKT_VLAN_VLD_F | TXPKT_VLAN_V(skb_vlan_tag_get(skb));
+
+	cpl->ctrl0 = cpu_to_be32(TXPKT_OPCODE_V(CPL_TX_PKT_XT) |
+				 TXPKT_INTF_V(pi->tx_chan) |
+				 TXPKT_PF_V(adap->pf));
+	cpl->pack = 0;
+	cpl->len = cpu_to_be16(skb->len);
+	cpl->ctrl1 = cpu_to_be64(cntrl);
+
+	start = (u64 *)(cpl + 1);
+
+write_wr_headers:
+	sgl = (u64 *)inline_tx_skb_header(skb, &eohw_txq->q, (void *)start,
+					  hdr_len);
+	if (data_len) {
+		ret = cxgb4_map_skb(adap->pdev_dev, skb, d->addr);
+		if (unlikely(ret)) {
+			memset(d->addr, 0, sizeof(d->addr));
+			eohw_txq->mapping_err++;
+			goto out_unlock;
+		}
+
+		end = (u64 *)wr + flits;
+		if (unlikely(start > sgl)) {
+			left = (u8 *)end - (u8 *)eohw_txq->q.stat;
+			end = (void *)eohw_txq->q.desc + left;
+		}
+
+		if (unlikely((u8 *)sgl >= (u8 *)eohw_txq->q.stat)) {
+			/* If current position is already at the end of the
+			 * txq, reset the current to point to start of the queue
+			 * and update the end ptr as well.
+			 */
+			left = (u8 *)end - (u8 *)eohw_txq->q.stat;
+
+			end = (void *)eohw_txq->q.desc + left;
+			sgl = (void *)eohw_txq->q.desc;
+		}
+
+		cxgb4_write_sgl(skb, &eohw_txq->q, (void *)sgl, end, hdr_len,
+				d->addr);
+	}
+
+	if (skb_shinfo(skb)->gso_size) {
+		if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4)
+			eohw_txq->uso++;
+		else
+			eohw_txq->tso++;
+		eohw_txq->tx_cso += skb_shinfo(skb)->gso_segs;
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		eohw_txq->tx_cso++;
+	}
+
+	if (skb_vlan_tag_present(skb))
+		eohw_txq->vlan_ins++;
+
+	txq_advance(&eohw_txq->q, ndesc);
+	cxgb4_ring_tx_db(adap, &eohw_txq->q, ndesc);
+	eosw_txq_advance_index(&eosw_txq->last_pidx, 1, eosw_txq->ndesc);
+
+out_unlock:
+	spin_unlock(&eohw_txq->lock);
+	return ret;
+}
+
+static void ethofld_xmit(struct net_device *dev, struct sge_eosw_txq *eosw_txq)
+{
+	struct sk_buff *skb;
+	int pktcount, ret;
+
+	switch (eosw_txq->state) {
+	case CXGB4_EO_STATE_ACTIVE:
+	case CXGB4_EO_STATE_FLOWC_OPEN_SEND:
+	case CXGB4_EO_STATE_FLOWC_CLOSE_SEND:
+		pktcount = eosw_txq->pidx - eosw_txq->last_pidx;
+		if (pktcount < 0)
+			pktcount += eosw_txq->ndesc;
+		break;
+	case CXGB4_EO_STATE_FLOWC_OPEN_REPLY:
+	case CXGB4_EO_STATE_FLOWC_CLOSE_REPLY:
+	case CXGB4_EO_STATE_CLOSED:
+	default:
+		return;
+	}
+
+	while (pktcount--) {
+		skb = eosw_txq_peek(eosw_txq);
+		if (!skb) {
+			eosw_txq_advance_index(&eosw_txq->last_pidx, 1,
+					       eosw_txq->ndesc);
+			continue;
+		}
+
+		ret = ethofld_hard_xmit(dev, eosw_txq);
+		if (ret)
+			break;
+	}
+}
+
+static netdev_tx_t cxgb4_ethofld_xmit(struct sk_buff *skb,
+				      struct net_device *dev)
+{
+	struct cxgb4_tc_port_mqprio *tc_port_mqprio;
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = netdev2adap(dev);
+	struct sge_eosw_txq *eosw_txq;
+	u32 qid;
+	int ret;
+
+	ret = cxgb4_validate_skb(skb, dev, ETH_HLEN);
+	if (ret)
+		goto out_free;
+
+	tc_port_mqprio = &adap->tc_mqprio->port_mqprio[pi->port_id];
+	qid = skb_get_queue_mapping(skb) - pi->nqsets;
+	eosw_txq = &tc_port_mqprio->eosw_txq[qid];
+	spin_lock_bh(&eosw_txq->lock);
+	if (eosw_txq->state != CXGB4_EO_STATE_ACTIVE)
+		goto out_unlock;
+
+	ret = eosw_txq_enqueue(eosw_txq, skb);
+	if (ret)
+		goto out_unlock;
+
+	/* SKB is queued for processing until credits are available.
+	 * So, call the destructor now and we'll free the skb later
+	 * after it has been successfully transmitted.
+	 */
+	skb_orphan(skb);
+
+	eosw_txq_advance(eosw_txq, 1);
+	ethofld_xmit(dev, eosw_txq);
+	spin_unlock_bh(&eosw_txq->lock);
+	return NETDEV_TX_OK;
+
+out_unlock:
+	spin_unlock_bh(&eosw_txq->lock);
+out_free:
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
+
+netdev_tx_t t4_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct port_info *pi = netdev_priv(dev);
+	u16 qid = skb_get_queue_mapping(skb);
+
+	if (unlikely(pi->eth_flags & PRIV_FLAG_PORT_TX_VM))
+		return cxgb4_vf_eth_xmit(skb, dev);
+
+	if (unlikely(qid >= pi->nqsets))
+		return cxgb4_ethofld_xmit(skb, dev);
+
+	if (is_ptp_enabled(skb, dev)) {
+		struct adapter *adap = netdev2adap(dev);
+		netdev_tx_t ret;
+
+		spin_lock(&adap->ptp_lock);
+		ret = cxgb4_eth_xmit(skb, dev);
+		spin_unlock(&adap->ptp_lock);
+		return ret;
+	}
+
+	return cxgb4_eth_xmit(skb, dev);
+}
+
+static void eosw_txq_flush_pending_skbs(struct sge_eosw_txq *eosw_txq)
+{
+	int pktcount = eosw_txq->pidx - eosw_txq->last_pidx;
+	int pidx = eosw_txq->pidx;
+	struct sk_buff *skb;
+
+	if (!pktcount)
+		return;
+
+	if (pktcount < 0)
+		pktcount += eosw_txq->ndesc;
+
+	while (pktcount--) {
+		pidx--;
+		if (pidx < 0)
+			pidx += eosw_txq->ndesc;
+
+		skb = eosw_txq->desc[pidx].skb;
+		if (skb) {
+			dev_consume_skb_any(skb);
+			eosw_txq->desc[pidx].skb = NULL;
+			eosw_txq->inuse--;
+		}
+	}
+
+	eosw_txq->pidx = eosw_txq->last_pidx + 1;
+}
+
+/**
+ * cxgb4_ethofld_send_flowc - Send ETHOFLD flowc request to bind eotid to tc.
+ * @dev: netdevice
+ * @eotid: ETHOFLD tid to bind/unbind
+ * @tc: traffic class. If set to FW_SCHED_CLS_NONE, then unbinds the @eotid
+ *
+ * Send a FLOWC work request to bind an ETHOFLD TID to a traffic class.
+ * If @tc is set to FW_SCHED_CLS_NONE, then the @eotid is unbound from
+ * a traffic class.
+ */
+int cxgb4_ethofld_send_flowc(struct net_device *dev, u32 eotid, u32 tc)
+{
+	struct port_info *pi = netdev2pinfo(dev);
+	struct adapter *adap = netdev2adap(dev);
+	enum sge_eosw_state next_state;
+	struct sge_eosw_txq *eosw_txq;
+	u32 len, len16, nparams = 6;
+	struct fw_flowc_wr *flowc;
+	struct eotid_entry *entry;
+	struct sge_ofld_rxq *rxq;
+	struct sk_buff *skb;
+	int ret = 0;
+
+	len = struct_size(flowc, mnemval, nparams);
+	len16 = DIV_ROUND_UP(len, 16);
+
+	entry = cxgb4_lookup_eotid(&adap->tids, eotid);
+	if (!entry)
+		return -ENOMEM;
+
+	eosw_txq = (struct sge_eosw_txq *)entry->data;
+	if (!eosw_txq)
+		return -ENOMEM;
+
+	if (!(adap->flags & CXGB4_FW_OK)) {
+		/* Don't stall caller when access to FW is lost */
+		complete(&eosw_txq->completion);
+		return -EIO;
+	}
+
+	skb = alloc_skb(len, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	spin_lock_bh(&eosw_txq->lock);
+	if (tc != FW_SCHED_CLS_NONE) {
+		if (eosw_txq->state != CXGB4_EO_STATE_CLOSED)
+			goto out_free_skb;
+
+		next_state = CXGB4_EO_STATE_FLOWC_OPEN_SEND;
+	} else {
+		if (eosw_txq->state != CXGB4_EO_STATE_ACTIVE)
+			goto out_free_skb;
+
+		next_state = CXGB4_EO_STATE_FLOWC_CLOSE_SEND;
+	}
+
+	flowc = __skb_put(skb, len);
+	memset(flowc, 0, len);
+
+	rxq = &adap->sge.eohw_rxq[eosw_txq->hwqid];
+	flowc->flowid_len16 = cpu_to_be32(FW_WR_LEN16_V(len16) |
+					  FW_WR_FLOWID_V(eosw_txq->hwtid));
+	flowc->op_to_nparams = cpu_to_be32(FW_WR_OP_V(FW_FLOWC_WR) |
+					   FW_FLOWC_WR_NPARAMS_V(nparams) |
+					   FW_WR_COMPL_V(1));
+	flowc->mnemval[0].mnemonic = FW_FLOWC_MNEM_PFNVFN;
+	flowc->mnemval[0].val = cpu_to_be32(FW_PFVF_CMD_PFN_V(adap->pf));
+	flowc->mnemval[1].mnemonic = FW_FLOWC_MNEM_CH;
+	flowc->mnemval[1].val = cpu_to_be32(pi->tx_chan);
+	flowc->mnemval[2].mnemonic = FW_FLOWC_MNEM_PORT;
+	flowc->mnemval[2].val = cpu_to_be32(pi->tx_chan);
+	flowc->mnemval[3].mnemonic = FW_FLOWC_MNEM_IQID;
+	flowc->mnemval[3].val = cpu_to_be32(rxq->rspq.abs_id);
+	flowc->mnemval[4].mnemonic = FW_FLOWC_MNEM_SCHEDCLASS;
+	flowc->mnemval[4].val = cpu_to_be32(tc);
+	flowc->mnemval[5].mnemonic = FW_FLOWC_MNEM_EOSTATE;
+	flowc->mnemval[5].val = cpu_to_be32(tc == FW_SCHED_CLS_NONE ?
+					    FW_FLOWC_MNEM_EOSTATE_CLOSING :
+					    FW_FLOWC_MNEM_EOSTATE_ESTABLISHED);
+
+	/* Free up any pending skbs to ensure there's room for
+	 * termination FLOWC.
+	 */
+	if (tc == FW_SCHED_CLS_NONE)
+		eosw_txq_flush_pending_skbs(eosw_txq);
+
+	ret = eosw_txq_enqueue(eosw_txq, skb);
+	if (ret)
+		goto out_free_skb;
+
+	eosw_txq->state = next_state;
+	eosw_txq->flowc_idx = eosw_txq->pidx;
+	eosw_txq_advance(eosw_txq, 1);
+	ethofld_xmit(dev, eosw_txq);
+
+	spin_unlock_bh(&eosw_txq->lock);
+	return 0;
+
+out_free_skb:
+	dev_consume_skb_any(skb);
+	spin_unlock_bh(&eosw_txq->lock);
+	return ret;
+}
+
+/**
+ *	is_imm - check whether a packet can be sent as immediate data
+ *	@skb: the packet
+ *
+ *	Returns true if a packet can be sent as a WR with immediate data.
+ */
+static inline int is_imm(const struct sk_buff *skb)
+{
+	return skb->len <= MAX_CTRL_WR_LEN;
+}
+
+/**
+ *	ctrlq_check_stop - check if a control queue is full and should stop
+ *	@q: the queue
+ *	@wr: most recent WR written to the queue
+ *
+ *	Check if a control queue has become full and should be stopped.
+ *	We clean up control queue descriptors very lazily, only when we are out.
+ *	If the queue is still full after reclaiming any completed descriptors
+ *	we suspend it and have the last WR wake it up.
+ */
+static void ctrlq_check_stop(struct sge_ctrl_txq *q, struct fw_wr_hdr *wr)
+{
+	reclaim_completed_tx_imm(&q->q);
+	if (unlikely(txq_avail(&q->q) < TXQ_STOP_THRES)) {
+		wr->lo |= htonl(FW_WR_EQUEQ_F | FW_WR_EQUIQ_F);
+		q->q.stops++;
+		q->full = 1;
+	}
+}
+
+#define CXGB4_SELFTEST_LB_STR "CHELSIO_SELFTEST"
+
+int cxgb4_selftest_lb_pkt(struct net_device *netdev)
+{
+	struct port_info *pi = netdev_priv(netdev);
+	struct adapter *adap = pi->adapter;
+	struct cxgb4_ethtool_lb_test *lb;
+	int ret, i = 0, pkt_len, credits;
+	struct fw_eth_tx_pkt_wr *wr;
+	struct cpl_tx_pkt_core *cpl;
+	u32 ctrl0, ndesc, flits;
+	struct sge_eth_txq *q;
+	u8 *sgl;
+
+	pkt_len = ETH_HLEN + sizeof(CXGB4_SELFTEST_LB_STR);
+
+	flits = DIV_ROUND_UP(pkt_len + sizeof(*cpl) + sizeof(*wr),
+			     sizeof(__be64));
+	ndesc = flits_to_desc(flits);
+
+	lb = &pi->ethtool_lb;
+	lb->loopback = 1;
+
+	q = &adap->sge.ethtxq[pi->first_qset];
+	__netif_tx_lock(q->txq, smp_processor_id());
+
+	reclaim_completed_tx(adap, &q->q, -1, true);
+	credits = txq_avail(&q->q) - ndesc;
+	if (unlikely(credits < 0)) {
+		__netif_tx_unlock(q->txq);
+		return -ENOMEM;
+	}
+
+	wr = (void *)&q->q.desc[q->q.pidx];
+	memset(wr, 0, sizeof(struct tx_desc));
+
+	wr->op_immdlen = htonl(FW_WR_OP_V(FW_ETH_TX_PKT_WR) |
+			       FW_WR_IMMDLEN_V(pkt_len +
+			       sizeof(*cpl)));
+	wr->equiq_to_len16 = htonl(FW_WR_LEN16_V(DIV_ROUND_UP(flits, 2)));
+	wr->r3 = cpu_to_be64(0);
+
+	cpl = (void *)(wr + 1);
+	sgl = (u8 *)(cpl + 1);
+
+	ctrl0 = TXPKT_OPCODE_V(CPL_TX_PKT_XT) | TXPKT_PF_V(adap->pf) |
+		TXPKT_INTF_V(pi->tx_chan + 4);
+
+	cpl->ctrl0 = htonl(ctrl0);
+	cpl->pack = htons(0);
+	cpl->len = htons(pkt_len);
+	cpl->ctrl1 = cpu_to_be64(TXPKT_L4CSUM_DIS_F | TXPKT_IPCSUM_DIS_F);
+
+	eth_broadcast_addr(sgl);
+	i += ETH_ALEN;
+	ether_addr_copy(&sgl[i], netdev->dev_addr);
+	i += ETH_ALEN;
+
+	snprintf(&sgl[i], sizeof(CXGB4_SELFTEST_LB_STR), "%s",
+		 CXGB4_SELFTEST_LB_STR);
+
+	init_completion(&lb->completion);
+	txq_advance(&q->q, ndesc);
+	cxgb4_ring_tx_db(adap, &q->q, ndesc);
+	__netif_tx_unlock(q->txq);
+
+	/* wait for the pkt to return */
+	ret = wait_for_completion_timeout(&lb->completion, 10 * HZ);
+	if (!ret)
+		ret = -ETIMEDOUT;
+	else
+		ret = lb->result;
+
+	lb->loopback = 0;
+
+	return ret;
+}
+
+/**
+ *	ctrl_xmit - send a packet through an SGE control Tx queue
+ *	@q: the control queue
+ *	@skb: the packet
+ *
+ *	Send a packet through an SGE control Tx queue.  Packets sent through
+ *	a control queue must fit entirely as immediate data.
+ */
+static int ctrl_xmit(struct sge_ctrl_txq *q, struct sk_buff *skb)
+{
+	unsigned int ndesc;
+	struct fw_wr_hdr *wr;
+
+	if (unlikely(!is_imm(skb))) {
+		WARN_ON(1);
+		dev_kfree_skb(skb);
+		return NET_XMIT_DROP;
+	}
+
+	ndesc = DIV_ROUND_UP(skb->len, sizeof(struct tx_desc));
+	spin_lock(&q->sendq.lock);
+
+	if (unlikely(q->full)) {
+		skb->priority = ndesc;                  /* save for restart */
+		__skb_queue_tail(&q->sendq, skb);
+		spin_unlock(&q->sendq.lock);
+		return NET_XMIT_CN;
+	}
+
+	wr = (struct fw_wr_hdr *)&q->q.desc[q->q.pidx];
+	cxgb4_inline_tx_skb(skb, &q->q, wr);
+
+	txq_advance(&q->q, ndesc);
+	if (unlikely(txq_avail(&q->q) < TXQ_STOP_THRES))
+		ctrlq_check_stop(q, wr);
+
+	cxgb4_ring_tx_db(q->adap, &q->q, ndesc);
+	spin_unlock(&q->sendq.lock);
+
+	kfree_skb(skb);
+	return NET_XMIT_SUCCESS;
+}
+
+/**
+ *	restart_ctrlq - restart a suspended control queue
+ *	@t: pointer to the tasklet associated with this handler
+ *
+ *	Resumes transmission on a suspended Tx control queue.
+ */
+static void restart_ctrlq(struct tasklet_struct *t)
+{
+	struct sk_buff *skb;
+	unsigned int written = 0;
+	struct sge_ctrl_txq *q = from_tasklet(q, t, qresume_tsk);
+
+	spin_lock(&q->sendq.lock);
+	reclaim_completed_tx_imm(&q->q);
+	BUG_ON(txq_avail(&q->q) < TXQ_STOP_THRES);  /* q should be empty */
+
+	while ((skb = __skb_dequeue(&q->sendq)) != NULL) {
+		struct fw_wr_hdr *wr;
+		unsigned int ndesc = skb->priority;     /* previously saved */
+
+		written += ndesc;
+		/* Write descriptors and free skbs outside the lock to limit
+		 * wait times.  q->full is still set so new skbs will be queued.
+		 */
+		wr = (struct fw_wr_hdr *)&q->q.desc[q->q.pidx];
+		txq_advance(&q->q, ndesc);
+		spin_unlock(&q->sendq.lock);
+
+		cxgb4_inline_tx_skb(skb, &q->q, wr);
+		kfree_skb(skb);
+
+		if (unlikely(txq_avail(&q->q) < TXQ_STOP_THRES)) {
+			unsigned long old = q->q.stops;
+
+			ctrlq_check_stop(q, wr);
+			if (q->q.stops != old) {          /* suspended anew */
+				spin_lock(&q->sendq.lock);
+				goto ringdb;
+			}
+		}
+		if (written > 16) {
+			cxgb4_ring_tx_db(q->adap, &q->q, written);
+			written = 0;
+		}
+		spin_lock(&q->sendq.lock);
+	}
+	q->full = 0;
+ringdb:
+	if (written)
+		cxgb4_ring_tx_db(q->adap, &q->q, written);
+	spin_unlock(&q->sendq.lock);
+}
+
+/**
+ *	t4_mgmt_tx - send a management message
+ *	@adap: the adapter
+ *	@skb: the packet containing the management message
+ *
+ *	Send a management message through control queue 0.
+ */
+int t4_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
+{
+	int ret;
+
+	local_bh_disable();
+	ret = ctrl_xmit(&adap->sge.ctrlq[0], skb);
+	local_bh_enable();
+	return ret;
+}
+
+/**
+ *	is_ofld_imm - check whether a packet can be sent as immediate data
+ *	@skb: the packet
+ *
+ *	Returns true if a packet can be sent as an offload WR with immediate
+ *	data.
+ *	FW_OFLD_TX_DATA_WR limits the payload to 255 bytes due to 8-bit field.
+ *      However, FW_ULPTX_WR commands have a 256 byte immediate only
+ *      payload limit.
+ */
+static inline int is_ofld_imm(const struct sk_buff *skb)
+{
+	struct work_request_hdr *req = (struct work_request_hdr *)skb->data;
+	unsigned long opcode = FW_WR_OP_G(ntohl(req->wr_hi));
+
+	if (unlikely(opcode == FW_ULPTX_WR))
+		return skb->len <= MAX_IMM_ULPTX_WR_LEN;
+	else if (opcode == FW_CRYPTO_LOOKASIDE_WR)
+		return skb->len <= SGE_MAX_WR_LEN;
+	else
+		return skb->len <= MAX_IMM_OFLD_TX_DATA_WR_LEN;
+}
+
+/**
+ *	calc_tx_flits_ofld - calculate # of flits for an offload packet
+ *	@skb: the packet
+ *
+ *	Returns the number of flits needed for the given offload packet.
+ *	These packets are already fully constructed and no additional headers
+ *	will be added.
+ */
+static inline unsigned int calc_tx_flits_ofld(const struct sk_buff *skb)
+{
+	unsigned int flits, cnt;
+
+	if (is_ofld_imm(skb))
+		return DIV_ROUND_UP(skb->len, 8);
+
+	flits = skb_transport_offset(skb) / 8U;   /* headers */
+	cnt = skb_shinfo(skb)->nr_frags;
+	if (skb_tail_pointer(skb) != skb_transport_header(skb))
+		cnt++;
+	return flits + sgl_len(cnt);
+}
+
+/**
+ *	txq_stop_maperr - stop a Tx queue due to I/O MMU exhaustion
+ *	@q: the queue to stop
+ *
+ *	Mark a Tx queue stopped due to I/O MMU exhaustion and resulting
+ *	inability to map packets.  A periodic timer attempts to restart
+ *	queues so marked.
+ */
+static void txq_stop_maperr(struct sge_uld_txq *q)
+{
+	q->mapping_err++;
+	q->q.stops++;
+	set_bit(q->q.cntxt_id - q->adap->sge.egr_start,
+		q->adap->sge.txq_maperr);
+}
+
+/**
+ *	ofldtxq_stop - stop an offload Tx queue that has become full
+ *	@q: the queue to stop
+ *	@wr: the Work Request causing the queue to become full
+ *
+ *	Stops an offload Tx queue that has become full and modifies the packet
+ *	being written to request a wakeup.
+ */
+static void ofldtxq_stop(struct sge_uld_txq *q, struct fw_wr_hdr *wr)
+{
+	wr->lo |= htonl(FW_WR_EQUEQ_F | FW_WR_EQUIQ_F);
+	q->q.stops++;
+	q->full = 1;
+}
+
+/**
+ *	service_ofldq - service/restart a suspended offload queue
+ *	@q: the offload queue
+ *
+ *	Services an offload Tx queue by moving packets from its Pending Send
+ *	Queue to the Hardware TX ring.  The function starts and ends with the
+ *	Send Queue locked, but drops the lock while putting the skb at the
+ *	head of the Send Queue onto the Hardware TX Ring.  Dropping the lock
+ *	allows more skbs to be added to the Send Queue by other threads.
+ *	The packet being processed at the head of the Pending Send Queue is
+ *	left on the queue in case we experience DMA Mapping errors, etc.
+ *	and need to give up and restart later.
+ *
+ *	service_ofldq() can be thought of as a task which opportunistically
+ *	uses other threads execution contexts.  We use the Offload Queue
+ *	boolean "service_ofldq_running" to make sure that only one instance
+ *	is ever running at a time ...
+ */
+static void service_ofldq(struct sge_uld_txq *q)
+	__must_hold(&q->sendq.lock)
+{
+	u64 *pos, *before, *end;
+	int credits;
+	struct sk_buff *skb;
+	struct sge_txq *txq;
+	unsigned int left;
+	unsigned int written = 0;
+	unsigned int flits, ndesc;
+
+	/* If another thread is currently in service_ofldq() processing the
+	 * Pending Send Queue then there's nothing to do. Otherwise, flag
+	 * that we're doing the work and continue.  Examining/modifying
+	 * the Offload Queue boolean "service_ofldq_running" must be done
+	 * while holding the Pending Send Queue Lock.
+	 */
+	if (q->service_ofldq_running)
+		return;
+	q->service_ofldq_running = true;
+
+	while ((skb = skb_peek(&q->sendq)) != NULL && !q->full) {
+		/* We drop the lock while we're working with the skb at the
+		 * head of the Pending Send Queue.  This allows more skbs to
+		 * be added to the Pending Send Queue while we're working on
+		 * this one.  We don't need to lock to guard the TX Ring
+		 * updates because only one thread of execution is ever
+		 * allowed into service_ofldq() at a time.
+		 */
+		spin_unlock(&q->sendq.lock);
+
+		cxgb4_reclaim_completed_tx(q->adap, &q->q, false);
+
+		flits = skb->priority;                /* previously saved */
+		ndesc = flits_to_desc(flits);
+		credits = txq_avail(&q->q) - ndesc;
+		BUG_ON(credits < 0);
+		if (unlikely(credits < TXQ_STOP_THRES))
+			ofldtxq_stop(q, (struct fw_wr_hdr *)skb->data);
+
+		pos = (u64 *)&q->q.desc[q->q.pidx];
+		if (is_ofld_imm(skb))
+			cxgb4_inline_tx_skb(skb, &q->q, pos);
+		else if (cxgb4_map_skb(q->adap->pdev_dev, skb,
+				       (dma_addr_t *)skb->head)) {
+			txq_stop_maperr(q);
+			spin_lock(&q->sendq.lock);
+			break;
+		} else {
+			int last_desc, hdr_len = skb_transport_offset(skb);
+
+			/* The WR headers  may not fit within one descriptor.
+			 * So we need to deal with wrap-around here.
+			 */
+			before = (u64 *)pos;
+			end = (u64 *)pos + flits;
+			txq = &q->q;
+			pos = (void *)inline_tx_skb_header(skb, &q->q,
+							   (void *)pos,
+							   hdr_len);
+			if (before > (u64 *)pos) {
+				left = (u8 *)end - (u8 *)txq->stat;
+				end = (void *)txq->desc + left;
+			}
+
+			/* If current position is already at the end of the
+			 * ofld queue, reset the current to point to
+			 * start of the queue and update the end ptr as well.
+			 */
+			if (pos == (u64 *)txq->stat) {
+				left = (u8 *)end - (u8 *)txq->stat;
+				end = (void *)txq->desc + left;
+				pos = (void *)txq->desc;
+			}
+
+			cxgb4_write_sgl(skb, &q->q, (void *)pos,
+					end, hdr_len,
+					(dma_addr_t *)skb->head);
+#ifdef CONFIG_NEED_DMA_MAP_STATE
+			skb->dev = q->adap->port[0];
+			skb->destructor = deferred_unmap_destructor;
+#endif
+			last_desc = q->q.pidx + ndesc - 1;
+			if (last_desc >= q->q.size)
+				last_desc -= q->q.size;
+			q->q.sdesc[last_desc].skb = skb;
+		}
+
+		txq_advance(&q->q, ndesc);
+		written += ndesc;
+		if (unlikely(written > 32)) {
+			cxgb4_ring_tx_db(q->adap, &q->q, written);
+			written = 0;
+		}
+
+		/* Reacquire the Pending Send Queue Lock so we can unlink the
+		 * skb we've just successfully transferred to the TX Ring and
+		 * loop for the next skb which may be at the head of the
+		 * Pending Send Queue.
+		 */
+		spin_lock(&q->sendq.lock);
+		__skb_unlink(skb, &q->sendq);
+		if (is_ofld_imm(skb))
+			kfree_skb(skb);
+	}
+	if (likely(written))
+		cxgb4_ring_tx_db(q->adap, &q->q, written);
+
+	/*Indicate that no thread is processing the Pending Send Queue
+	 * currently.
+	 */
+	q->service_ofldq_running = false;
+}
+
+/**
+ *	ofld_xmit - send a packet through an offload queue
+ *	@q: the Tx offload queue
+ *	@skb: the packet
+ *
+ *	Send an offload packet through an SGE offload queue.
+ */
+static int ofld_xmit(struct sge_uld_txq *q, struct sk_buff *skb)
+{
+	skb->priority = calc_tx_flits_ofld(skb);       /* save for restart */
+	spin_lock(&q->sendq.lock);
+
+	/* Queue the new skb onto the Offload Queue's Pending Send Queue.  If
+	 * that results in this new skb being the only one on the queue, start
+	 * servicing it.  If there are other skbs already on the list, then
+	 * either the queue is currently being processed or it's been stopped
+	 * for some reason and it'll be restarted at a later time.  Restart
+	 * paths are triggered by events like experiencing a DMA Mapping Error
+	 * or filling the Hardware TX Ring.
+	 */
+	__skb_queue_tail(&q->sendq, skb);
+	if (q->sendq.qlen == 1)
+		service_ofldq(q);
+
+	spin_unlock(&q->sendq.lock);
+	return NET_XMIT_SUCCESS;
+}
+
+/**
+ *	restart_ofldq - restart a suspended offload queue
+ *	@t: pointer to the tasklet associated with this handler
+ *
+ *	Resumes transmission on a suspended Tx offload queue.
+ */
+static void restart_ofldq(struct tasklet_struct *t)
+{
+	struct sge_uld_txq *q = from_tasklet(q, t, qresume_tsk);
+
+	spin_lock(&q->sendq.lock);
+	q->full = 0;            /* the queue actually is completely empty now */
+	service_ofldq(q);
+	spin_unlock(&q->sendq.lock);
+}
+
+/**
+ *	skb_txq - return the Tx queue an offload packet should use
+ *	@skb: the packet
+ *
+ *	Returns the Tx queue an offload packet should use as indicated by bits
+ *	1-15 in the packet's queue_mapping.
+ */
+static inline unsigned int skb_txq(const struct sk_buff *skb)
+{
+	return skb->queue_mapping >> 1;
+}
+
+/**
+ *	is_ctrl_pkt - return whether an offload packet is a control packet
+ *	@skb: the packet
+ *
+ *	Returns whether an offload packet should use an OFLD or a CTRL
+ *	Tx queue as indicated by bit 0 in the packet's queue_mapping.
+ */
+static inline unsigned int is_ctrl_pkt(const struct sk_buff *skb)
+{
+	return skb->queue_mapping & 1;
+}
+
+static inline int uld_send(struct adapter *adap, struct sk_buff *skb,
+			   unsigned int tx_uld_type)
+{
+	struct sge_uld_txq_info *txq_info;
+	struct sge_uld_txq *txq;
+	unsigned int idx = skb_txq(skb);
+
+	if (unlikely(is_ctrl_pkt(skb))) {
+		/* Single ctrl queue is a requirement for LE workaround path */
+		if (adap->tids.nsftids)
+			idx = 0;
+		return ctrl_xmit(&adap->sge.ctrlq[idx], skb);
+	}
+
+	txq_info = adap->sge.uld_txq_info[tx_uld_type];
+	if (unlikely(!txq_info)) {
+		WARN_ON(true);
+		kfree_skb(skb);
+		return NET_XMIT_DROP;
+	}
+
+	txq = &txq_info->uldtxq[idx];
+	return ofld_xmit(txq, skb);
+}
+
+/**
+ *	t4_ofld_send - send an offload packet
+ *	@adap: the adapter
+ *	@skb: the packet
+ *
+ *	Sends an offload packet.  We use the packet queue_mapping to select the
+ *	appropriate Tx queue as follows: bit 0 indicates whether the packet
+ *	should be sent as regular or control, bits 1-15 select the queue.
+ */
+int t4_ofld_send(struct adapter *adap, struct sk_buff *skb)
+{
+	int ret;
+
+	local_bh_disable();
+	ret = uld_send(adap, skb, CXGB4_TX_OFLD);
+	local_bh_enable();
+	return ret;
+}
+
+/**
+ *	cxgb4_ofld_send - send an offload packet
+ *	@dev: the net device
+ *	@skb: the packet
+ *
+ *	Sends an offload packet.  This is an exported version of @t4_ofld_send,
+ *	intended for ULDs.
+ */
+int cxgb4_ofld_send(struct net_device *dev, struct sk_buff *skb)
+{
+	return t4_ofld_send(netdev2adap(dev), skb);
+}
+EXPORT_SYMBOL(cxgb4_ofld_send);
+
+static void *inline_tx_header(const void *src,
+			      const struct sge_txq *q,
+			      void *pos, int length)
+{
+	int left = (void *)q->stat - pos;
+	u64 *p;
+
+	if (likely(length <= left)) {
+		memcpy(pos, src, length);
+		pos += length;
+	} else {
+		memcpy(pos, src, left);
+		memcpy(q->desc, src + left, length - left);
+		pos = (void *)q->desc + (length - left);
+	}
+	/* 0-pad to multiple of 16 */
+	p = PTR_ALIGN(pos, 8);
+	if ((uintptr_t)p & 8) {
+		*p = 0;
+		return p + 1;
+	}
+	return p;
+}
+
+/**
+ *      ofld_xmit_direct - copy a WR into offload queue
+ *      @q: the Tx offload queue
+ *      @src: location of WR
+ *      @len: WR length
+ *
+ *      Copy an immediate WR into an uncontended SGE offload queue.
+ */
+static int ofld_xmit_direct(struct sge_uld_txq *q, const void *src,
+			    unsigned int len)
+{
+	unsigned int ndesc;
+	int credits;
+	u64 *pos;
+
+	/* Use the lower limit as the cut-off */
+	if (len > MAX_IMM_OFLD_TX_DATA_WR_LEN) {
+		WARN_ON(1);
+		return NET_XMIT_DROP;
+	}
+
+	/* Don't return NET_XMIT_CN here as the current
+	 * implementation doesn't queue the request
+	 * using an skb when the following conditions not met
+	 */
+	if (!spin_trylock(&q->sendq.lock))
+		return NET_XMIT_DROP;
+
+	if (q->full || !skb_queue_empty(&q->sendq) ||
+	    q->service_ofldq_running) {
+		spin_unlock(&q->sendq.lock);
+		return NET_XMIT_DROP;
+	}
+	ndesc = flits_to_desc(DIV_ROUND_UP(len, 8));
+	credits = txq_avail(&q->q) - ndesc;
+	pos = (u64 *)&q->q.desc[q->q.pidx];
+
+	/* ofldtxq_stop modifies WR header in-situ */
+	inline_tx_header(src, &q->q, pos, len);
+	if (unlikely(credits < TXQ_STOP_THRES))
+		ofldtxq_stop(q, (struct fw_wr_hdr *)pos);
+	txq_advance(&q->q, ndesc);
+	cxgb4_ring_tx_db(q->adap, &q->q, ndesc);
+
+	spin_unlock(&q->sendq.lock);
+	return NET_XMIT_SUCCESS;
+}
+
+int cxgb4_immdata_send(struct net_device *dev, unsigned int idx,
+		       const void *src, unsigned int len)
+{
+	struct sge_uld_txq_info *txq_info;
+	struct sge_uld_txq *txq;
+	struct adapter *adap;
+	int ret;
+
+	adap = netdev2adap(dev);
+
+	local_bh_disable();
+	txq_info = adap->sge.uld_txq_info[CXGB4_TX_OFLD];
+	if (unlikely(!txq_info)) {
+		WARN_ON(true);
+		local_bh_enable();
+		return NET_XMIT_DROP;
+	}
+	txq = &txq_info->uldtxq[idx];
+
+	ret = ofld_xmit_direct(txq, src, len);
+	local_bh_enable();
+	return net_xmit_eval(ret);
+}
+EXPORT_SYMBOL(cxgb4_immdata_send);
+
+/**
+ *	t4_crypto_send - send crypto packet
+ *	@adap: the adapter
+ *	@skb: the packet
+ *
+ *	Sends crypto packet.  We use the packet queue_mapping to select the
+ *	appropriate Tx queue as follows: bit 0 indicates whether the packet
+ *	should be sent as regular or control, bits 1-15 select the queue.
+ */
+static int t4_crypto_send(struct adapter *adap, struct sk_buff *skb)
+{
+	int ret;
+
+	local_bh_disable();
+	ret = uld_send(adap, skb, CXGB4_TX_CRYPTO);
+	local_bh_enable();
+	return ret;
+}
+
+/**
+ *	cxgb4_crypto_send - send crypto packet
+ *	@dev: the net device
+ *	@skb: the packet
+ *
+ *	Sends crypto packet.  This is an exported version of @t4_crypto_send,
+ *	intended for ULDs.
+ */
+int cxgb4_crypto_send(struct net_device *dev, struct sk_buff *skb)
+{
+	return t4_crypto_send(netdev2adap(dev), skb);
+}
+EXPORT_SYMBOL(cxgb4_crypto_send);
+
+static inline void copy_frags(struct sk_buff *skb,
+			      const struct pkt_gl *gl, unsigned int offset)
+{
+	int i;
+
+	/* usually there's just one frag */
+	__skb_fill_page_desc(skb, 0, gl->frags[0].page,
+			     gl->frags[0].offset + offset,
+			     gl->frags[0].size - offset);
+	skb_shinfo(skb)->nr_frags = gl->nfrags;
+	for (i = 1; i < gl->nfrags; i++)
+		__skb_fill_page_desc(skb, i, gl->frags[i].page,
+				     gl->frags[i].offset,
+				     gl->frags[i].size);
+
+	/* get a reference to the last page, we don't own it */
+	get_page(gl->frags[gl->nfrags - 1].page);
+}
+
+/**
+ *	cxgb4_pktgl_to_skb - build an sk_buff from a packet gather list
+ *	@gl: the gather list
+ *	@skb_len: size of sk_buff main body if it carries fragments
+ *	@pull_len: amount of data to move to the sk_buff's main body
+ *
+ *	Builds an sk_buff from the given packet gather list.  Returns the
+ *	sk_buff or %NULL if sk_buff allocation failed.
+ */
+struct sk_buff *cxgb4_pktgl_to_skb(const struct pkt_gl *gl,
+				   unsigned int skb_len, unsigned int pull_len)
+{
+	struct sk_buff *skb;
+
+	/*
+	 * Below we rely on RX_COPY_THRES being less than the smallest Rx buffer
+	 * size, which is expected since buffers are at least PAGE_SIZEd.
+	 * In this case packets up to RX_COPY_THRES have only one fragment.
+	 */
+	if (gl->tot_len <= RX_COPY_THRES) {
+		skb = dev_alloc_skb(gl->tot_len);
+		if (unlikely(!skb))
+			goto out;
+		__skb_put(skb, gl->tot_len);
+		skb_copy_to_linear_data(skb, gl->va, gl->tot_len);
+	} else {
+		skb = dev_alloc_skb(skb_len);
+		if (unlikely(!skb))
+			goto out;
+		__skb_put(skb, pull_len);
+		skb_copy_to_linear_data(skb, gl->va, pull_len);
+
+		copy_frags(skb, gl, pull_len);
+		skb->len = gl->tot_len;
+		skb->data_len = skb->len - pull_len;
+		skb->truesize += skb->data_len;
+	}
+out:	return skb;
+}
+EXPORT_SYMBOL(cxgb4_pktgl_to_skb);
+
+/**
+ *	t4_pktgl_free - free a packet gather list
+ *	@gl: the gather list
+ *
+ *	Releases the pages of a packet gather list.  We do not own the last
+ *	page on the list and do not free it.
+ */
+static void t4_pktgl_free(const struct pkt_gl *gl)
+{
+	int n;
+	const struct page_frag *p;
+
+	for (p = gl->frags, n = gl->nfrags - 1; n--; p++)
+		put_page(p->page);
+}
+
+/*
+ * Process an MPS trace packet.  Give it an unused protocol number so it won't
+ * be delivered to anyone and send it to the stack for capture.
+ */
+static noinline int handle_trace_pkt(struct adapter *adap,
+				     const struct pkt_gl *gl)
+{
+	struct sk_buff *skb;
+
+	skb = cxgb4_pktgl_to_skb(gl, RX_PULL_LEN, RX_PULL_LEN);
+	if (unlikely(!skb)) {
+		t4_pktgl_free(gl);
+		return 0;
+	}
+
+	if (is_t4(adap->params.chip))
+		__skb_pull(skb, sizeof(struct cpl_trace_pkt));
+	else
+		__skb_pull(skb, sizeof(struct cpl_t5_trace_pkt));
+
+	skb_reset_mac_header(skb);
+	skb->protocol = htons(0xffff);
+	skb->dev = adap->port[0];
+	netif_receive_skb(skb);
+	return 0;
+}
+
+/**
+ * cxgb4_sgetim_to_hwtstamp - convert sge time stamp to hw time stamp
+ * @adap: the adapter
+ * @hwtstamps: time stamp structure to update
+ * @sgetstamp: 60bit iqe timestamp
+ *
+ * Every ingress queue entry has the 60-bit timestamp, convert that timestamp
+ * which is in Core Clock ticks into ktime_t and assign it
+ **/
+static void cxgb4_sgetim_to_hwtstamp(struct adapter *adap,
+				     struct skb_shared_hwtstamps *hwtstamps,
+				     u64 sgetstamp)
+{
+	u64 ns;
+	u64 tmp = (sgetstamp * 1000 * 1000 + adap->params.vpd.cclk / 2);
+
+	ns = div_u64(tmp, adap->params.vpd.cclk);
+
+	memset(hwtstamps, 0, sizeof(*hwtstamps));
+	hwtstamps->hwtstamp = ns_to_ktime(ns);
+}
+
+static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl,
+		   const struct cpl_rx_pkt *pkt, unsigned long tnl_hdr_len)
+{
+	struct adapter *adapter = rxq->rspq.adap;
+	struct sge *s = &adapter->sge;
+	struct port_info *pi;
+	int ret;
+	struct sk_buff *skb;
+
+	skb = napi_get_frags(&rxq->rspq.napi);
+	if (unlikely(!skb)) {
+		t4_pktgl_free(gl);
+		rxq->stats.rx_drops++;
+		return;
+	}
+
+	copy_frags(skb, gl, s->pktshift);
+	if (tnl_hdr_len)
+		skb->csum_level = 1;
+	skb->len = gl->tot_len - s->pktshift;
+	skb->data_len = skb->len;
+	skb->truesize += skb->data_len;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	skb_record_rx_queue(skb, rxq->rspq.idx);
+	pi = netdev_priv(skb->dev);
+	if (pi->rxtstamp)
+		cxgb4_sgetim_to_hwtstamp(adapter, skb_hwtstamps(skb),
+					 gl->sgetstamp);
+	if (rxq->rspq.netdev->features & NETIF_F_RXHASH)
+		skb_set_hash(skb, (__force u32)pkt->rsshdr.hash_val,
+			     PKT_HASH_TYPE_L3);
+
+	if (unlikely(pkt->vlan_ex)) {
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(pkt->vlan));
+		rxq->stats.vlan_ex++;
+	}
+	ret = napi_gro_frags(&rxq->rspq.napi);
+	if (ret == GRO_HELD)
+		rxq->stats.lro_pkts++;
+	else if (ret == GRO_MERGED || ret == GRO_MERGED_FREE)
+		rxq->stats.lro_merged++;
+	rxq->stats.pkts++;
+	rxq->stats.rx_cso++;
+}
+
+enum {
+	RX_NON_PTP_PKT = 0,
+	RX_PTP_PKT_SUC = 1,
+	RX_PTP_PKT_ERR = 2
+};
+
+/**
+ *     t4_systim_to_hwstamp - read hardware time stamp
+ *     @adapter: the adapter
+ *     @skb: the packet
+ *
+ *     Read Time Stamp from MPS packet and insert in skb which
+ *     is forwarded to PTP application
+ */
+static noinline int t4_systim_to_hwstamp(struct adapter *adapter,
+					 struct sk_buff *skb)
+{
+	struct skb_shared_hwtstamps *hwtstamps;
+	struct cpl_rx_mps_pkt *cpl = NULL;
+	unsigned char *data;
+	int offset;
+
+	cpl = (struct cpl_rx_mps_pkt *)skb->data;
+	if (!(CPL_RX_MPS_PKT_TYPE_G(ntohl(cpl->op_to_r1_hi)) &
+	     X_CPL_RX_MPS_PKT_TYPE_PTP))
+		return RX_PTP_PKT_ERR;
+
+	data = skb->data + sizeof(*cpl);
+	skb_pull(skb, 2 * sizeof(u64) + sizeof(struct cpl_rx_mps_pkt));
+	offset = ETH_HLEN + IPV4_HLEN(skb->data) + UDP_HLEN;
+	if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(short))
+		return RX_PTP_PKT_ERR;
+
+	hwtstamps = skb_hwtstamps(skb);
+	memset(hwtstamps, 0, sizeof(*hwtstamps));
+	hwtstamps->hwtstamp = ns_to_ktime(get_unaligned_be64(data));
+
+	return RX_PTP_PKT_SUC;
+}
+
+/**
+ *     t4_rx_hststamp - Recv PTP Event Message
+ *     @adapter: the adapter
+ *     @rsp: the response queue descriptor holding the RX_PKT message
+ *     @rxq: the response queue holding the RX_PKT message
+ *     @skb: the packet
+ *
+ *     PTP enabled and MPS packet, read HW timestamp
+ */
+static int t4_rx_hststamp(struct adapter *adapter, const __be64 *rsp,
+			  struct sge_eth_rxq *rxq, struct sk_buff *skb)
+{
+	int ret;
+
+	if (unlikely((*(u8 *)rsp == CPL_RX_MPS_PKT) &&
+		     !is_t4(adapter->params.chip))) {
+		ret = t4_systim_to_hwstamp(adapter, skb);
+		if (ret == RX_PTP_PKT_ERR) {
+			kfree_skb(skb);
+			rxq->stats.rx_drops++;
+		}
+		return ret;
+	}
+	return RX_NON_PTP_PKT;
+}
+
+/**
+ *      t4_tx_hststamp - Loopback PTP Transmit Event Message
+ *      @adapter: the adapter
+ *      @skb: the packet
+ *      @dev: the ingress net device
+ *
+ *      Read hardware timestamp for the loopback PTP Tx event message
+ */
+static int t4_tx_hststamp(struct adapter *adapter, struct sk_buff *skb,
+			  struct net_device *dev)
+{
+	struct port_info *pi = netdev_priv(dev);
+
+	if (!is_t4(adapter->params.chip) && adapter->ptp_tx_skb) {
+		cxgb4_ptp_read_hwstamp(adapter, pi);
+		kfree_skb(skb);
+		return 0;
+	}
+	return 1;
+}
+
+/**
+ *	t4_tx_completion_handler - handle CPL_SGE_EGR_UPDATE messages
+ *	@rspq: Ethernet RX Response Queue associated with Ethernet TX Queue
+ *	@rsp: Response Entry pointer into Response Queue
+ *	@gl: Gather List pointer
+ *
+ *	For adapters which support the SGE Doorbell Queue Timer facility,
+ *	we configure the Ethernet TX Queues to send CIDX Updates to the
+ *	Associated Ethernet RX Response Queue with CPL_SGE_EGR_UPDATE
+ *	messages.  This adds a small load to PCIe Link RX bandwidth and,
+ *	potentially, higher CPU Interrupt load, but allows us to respond
+ *	much more quickly to the CIDX Updates.  This is important for
+ *	Upper Layer Software which isn't willing to have a large amount
+ *	of TX Data outstanding before receiving DMA Completions.
+ */
+static void t4_tx_completion_handler(struct sge_rspq *rspq,
+				     const __be64 *rsp,
+				     const struct pkt_gl *gl)
+{
+	u8 opcode = ((const struct rss_header *)rsp)->opcode;
+	struct port_info *pi = netdev_priv(rspq->netdev);
+	struct adapter *adapter = rspq->adap;
+	struct sge *s = &adapter->sge;
+	struct sge_eth_txq *txq;
+
+	/* skip RSS header */
+	rsp++;
+
+	/* FW can send EGR_UPDATEs encapsulated in a CPL_FW4_MSG.
+	 */
+	if (unlikely(opcode == CPL_FW4_MSG &&
+		     ((const struct cpl_fw4_msg *)rsp)->type ==
+							FW_TYPE_RSSCPL)) {
+		rsp++;
+		opcode = ((const struct rss_header *)rsp)->opcode;
+		rsp++;
+	}
+
+	if (unlikely(opcode != CPL_SGE_EGR_UPDATE)) {
+		pr_info("%s: unexpected FW4/CPL %#x on Rx queue\n",
+			__func__, opcode);
+		return;
+	}
+
+	txq = &s->ethtxq[pi->first_qset + rspq->idx];
+
+	/* We've got the Hardware Consumer Index Update in the Egress Update
+	 * message. These Egress Update messages will be our sole CIDX Updates
+	 * we get since we don't want to chew up PCIe bandwidth for both Ingress
+	 * Messages and Status Page writes.  However, The code which manages
+	 * reclaiming successfully DMA'ed TX Work Requests uses the CIDX value
+	 * stored in the Status Page at the end of the TX Queue.  It's easiest
+	 * to simply copy the CIDX Update value from the Egress Update message
+	 * to the Status Page.  Also note that no Endian issues need to be
+	 * considered here since both are Big Endian and we're just copying
+	 * bytes consistently ...
+	 */
+	if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) {
+		struct cpl_sge_egr_update *egr;
+
+		egr = (struct cpl_sge_egr_update *)rsp;
+		WRITE_ONCE(txq->q.stat->cidx, egr->cidx);
+	}
+
+	t4_sge_eth_txq_egress_update(adapter, txq, -1);
+}
+
+static int cxgb4_validate_lb_pkt(struct port_info *pi, const struct pkt_gl *si)
+{
+	struct adapter *adap = pi->adapter;
+	struct cxgb4_ethtool_lb_test *lb;
+	struct sge *s = &adap->sge;
+	struct net_device *netdev;
+	u8 *data;
+	int i;
+
+	netdev = adap->port[pi->port_id];
+	lb = &pi->ethtool_lb;
+	data = si->va + s->pktshift;
+
+	i = ETH_ALEN;
+	if (!ether_addr_equal(data + i, netdev->dev_addr))
+		return -1;
+
+	i += ETH_ALEN;
+	if (strcmp(&data[i], CXGB4_SELFTEST_LB_STR))
+		lb->result = -EIO;
+
+	complete(&lb->completion);
+	return 0;
+}
+
+/**
+ *	t4_ethrx_handler - process an ingress ethernet packet
+ *	@q: the response queue that received the packet
+ *	@rsp: the response queue descriptor holding the RX_PKT message
+ *	@si: the gather list of packet fragments
+ *
+ *	Process an ingress ethernet packet and deliver it to the stack.
+ */
+int t4_ethrx_handler(struct sge_rspq *q, const __be64 *rsp,
+		     const struct pkt_gl *si)
+{
+	bool csum_ok;
+	struct sk_buff *skb;
+	const struct cpl_rx_pkt *pkt;
+	struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
+	struct adapter *adapter = q->adap;
+	struct sge *s = &q->adap->sge;
+	int cpl_trace_pkt = is_t4(q->adap->params.chip) ?
+			    CPL_TRACE_PKT : CPL_TRACE_PKT_T5;
+	u16 err_vec, tnl_hdr_len = 0;
+	struct port_info *pi;
+	int ret = 0;
+
+	pi = netdev_priv(q->netdev);
+	/* If we're looking at TX Queue CIDX Update, handle that separately
+	 * and return.
+	 */
+	if (unlikely((*(u8 *)rsp == CPL_FW4_MSG) ||
+		     (*(u8 *)rsp == CPL_SGE_EGR_UPDATE))) {
+		t4_tx_completion_handler(q, rsp, si);
+		return 0;
+	}
+
+	if (unlikely(*(u8 *)rsp == cpl_trace_pkt))
+		return handle_trace_pkt(q->adap, si);
+
+	pkt = (const struct cpl_rx_pkt *)rsp;
+	/* Compressed error vector is enabled for T6 only */
+	if (q->adap->params.tp.rx_pkt_encap) {
+		err_vec = T6_COMPR_RXERR_VEC_G(be16_to_cpu(pkt->err_vec));
+		tnl_hdr_len = T6_RX_TNLHDR_LEN_G(ntohs(pkt->err_vec));
+	} else {
+		err_vec = be16_to_cpu(pkt->err_vec);
+	}
+
+	csum_ok = pkt->csum_calc && !err_vec &&
+		  (q->netdev->features & NETIF_F_RXCSUM);
+
+	if (err_vec)
+		rxq->stats.bad_rx_pkts++;
+
+	if (unlikely(pi->ethtool_lb.loopback && pkt->iff >= NCHAN)) {
+		ret = cxgb4_validate_lb_pkt(pi, si);
+		if (!ret)
+			return 0;
+	}
+
+	if (((pkt->l2info & htonl(RXF_TCP_F)) ||
+	     tnl_hdr_len) &&
+	    (q->netdev->features & NETIF_F_GRO) && csum_ok && !pkt->ip_frag) {
+		do_gro(rxq, si, pkt, tnl_hdr_len);
+		return 0;
+	}
+
+	skb = cxgb4_pktgl_to_skb(si, RX_PKT_SKB_LEN, RX_PULL_LEN);
+	if (unlikely(!skb)) {
+		t4_pktgl_free(si);
+		rxq->stats.rx_drops++;
+		return 0;
+	}
+
+	/* Handle PTP Event Rx packet */
+	if (unlikely(pi->ptp_enable)) {
+		ret = t4_rx_hststamp(adapter, rsp, rxq, skb);
+		if (ret == RX_PTP_PKT_ERR)
+			return 0;
+	}
+	if (likely(!ret))
+		__skb_pull(skb, s->pktshift); /* remove ethernet header pad */
+
+	/* Handle the PTP Event Tx Loopback packet */
+	if (unlikely(pi->ptp_enable && !ret &&
+		     (pkt->l2info & htonl(RXF_UDP_F)) &&
+		     cxgb4_ptp_is_ptp_rx(skb))) {
+		if (!t4_tx_hststamp(adapter, skb, q->netdev))
+			return 0;
+	}
+
+	skb->protocol = eth_type_trans(skb, q->netdev);
+	skb_record_rx_queue(skb, q->idx);
+	if (skb->dev->features & NETIF_F_RXHASH)
+		skb_set_hash(skb, (__force u32)pkt->rsshdr.hash_val,
+			     PKT_HASH_TYPE_L3);
+
+	rxq->stats.pkts++;
+
+	if (pi->rxtstamp)
+		cxgb4_sgetim_to_hwtstamp(q->adap, skb_hwtstamps(skb),
+					 si->sgetstamp);
+	if (csum_ok && (pkt->l2info & htonl(RXF_UDP_F | RXF_TCP_F))) {
+		if (!pkt->ip_frag) {
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+			rxq->stats.rx_cso++;
+		} else if (pkt->l2info & htonl(RXF_IP_F)) {
+			__sum16 c = (__force __sum16)pkt->csum;
+			skb->csum = csum_unfold(c);
+
+			if (tnl_hdr_len) {
+				skb->ip_summed = CHECKSUM_UNNECESSARY;
+				skb->csum_level = 1;
+			} else {
+				skb->ip_summed = CHECKSUM_COMPLETE;
+			}
+			rxq->stats.rx_cso++;
+		}
+	} else {
+		skb_checksum_none_assert(skb);
+#ifdef CONFIG_CHELSIO_T4_FCOE
+#define CPL_RX_PKT_FLAGS (RXF_PSH_F | RXF_SYN_F | RXF_UDP_F | \
+			  RXF_TCP_F | RXF_IP_F | RXF_IP6_F | RXF_LRO_F)
+
+		if (!(pkt->l2info & cpu_to_be32(CPL_RX_PKT_FLAGS))) {
+			if ((pkt->l2info & cpu_to_be32(RXF_FCOE_F)) &&
+			    (pi->fcoe.flags & CXGB_FCOE_ENABLED)) {
+				if (q->adap->params.tp.rx_pkt_encap)
+					csum_ok = err_vec &
+						  T6_COMPR_RXERR_SUM_F;
+				else
+					csum_ok = err_vec & RXERR_CSUM_F;
+				if (!csum_ok)
+					skb->ip_summed = CHECKSUM_UNNECESSARY;
+			}
+		}
+
+#undef CPL_RX_PKT_FLAGS
+#endif /* CONFIG_CHELSIO_T4_FCOE */
+	}
+
+	if (unlikely(pkt->vlan_ex)) {
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(pkt->vlan));
+		rxq->stats.vlan_ex++;
+	}
+	skb_mark_napi_id(skb, &q->napi);
+	netif_receive_skb(skb);
+	return 0;
+}
+
+/**
+ *	restore_rx_bufs - put back a packet's Rx buffers
+ *	@si: the packet gather list
+ *	@q: the SGE free list
+ *	@frags: number of FL buffers to restore
+ *
+ *	Puts back on an FL the Rx buffers associated with @si.  The buffers
+ *	have already been unmapped and are left unmapped, we mark them so to
+ *	prevent further unmapping attempts.
+ *
+ *	This function undoes a series of @unmap_rx_buf calls when we find out
+ *	that the current packet can't be processed right away afterall and we
+ *	need to come back to it later.  This is a very rare event and there's
+ *	no effort to make this particularly efficient.
+ */
+static void restore_rx_bufs(const struct pkt_gl *si, struct sge_fl *q,
+			    int frags)
+{
+	struct rx_sw_desc *d;
+
+	while (frags--) {
+		if (q->cidx == 0)
+			q->cidx = q->size - 1;
+		else
+			q->cidx--;
+		d = &q->sdesc[q->cidx];
+		d->page = si->frags[frags].page;
+		d->dma_addr |= RX_UNMAPPED_BUF;
+		q->avail++;
+	}
+}
+
+/**
+ *	is_new_response - check if a response is newly written
+ *	@r: the response descriptor
+ *	@q: the response queue
+ *
+ *	Returns true if a response descriptor contains a yet unprocessed
+ *	response.
+ */
+static inline bool is_new_response(const struct rsp_ctrl *r,
+				   const struct sge_rspq *q)
+{
+	return (r->type_gen >> RSPD_GEN_S) == q->gen;
+}
+
+/**
+ *	rspq_next - advance to the next entry in a response queue
+ *	@q: the queue
+ *
+ *	Updates the state of a response queue to advance it to the next entry.
+ */
+static inline void rspq_next(struct sge_rspq *q)
+{
+	q->cur_desc = (void *)q->cur_desc + q->iqe_len;
+	if (unlikely(++q->cidx == q->size)) {
+		q->cidx = 0;
+		q->gen ^= 1;
+		q->cur_desc = q->desc;
+	}
+}
+
+/**
+ *	process_responses - process responses from an SGE response queue
+ *	@q: the ingress queue to process
+ *	@budget: how many responses can be processed in this round
+ *
+ *	Process responses from an SGE response queue up to the supplied budget.
+ *	Responses include received packets as well as control messages from FW
+ *	or HW.
+ *
+ *	Additionally choose the interrupt holdoff time for the next interrupt
+ *	on this queue.  If the system is under memory shortage use a fairly
+ *	long delay to help recovery.
+ */
+static int process_responses(struct sge_rspq *q, int budget)
+{
+	int ret, rsp_type;
+	int budget_left = budget;
+	const struct rsp_ctrl *rc;
+	struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, rspq);
+	struct adapter *adapter = q->adap;
+	struct sge *s = &adapter->sge;
+
+	while (likely(budget_left)) {
+		rc = (void *)q->cur_desc + (q->iqe_len - sizeof(*rc));
+		if (!is_new_response(rc, q)) {
+			if (q->flush_handler)
+				q->flush_handler(q);
+			break;
+		}
+
+		dma_rmb();
+		rsp_type = RSPD_TYPE_G(rc->type_gen);
+		if (likely(rsp_type == RSPD_TYPE_FLBUF_X)) {
+			struct page_frag *fp;
+			struct pkt_gl si;
+			const struct rx_sw_desc *rsd;
+			u32 len = ntohl(rc->pldbuflen_qid), bufsz, frags;
+
+			if (len & RSPD_NEWBUF_F) {
+				if (likely(q->offset > 0)) {
+					free_rx_bufs(q->adap, &rxq->fl, 1);
+					q->offset = 0;
+				}
+				len = RSPD_LEN_G(len);
+			}
+			si.tot_len = len;
+
+			/* gather packet fragments */
+			for (frags = 0, fp = si.frags; ; frags++, fp++) {
+				rsd = &rxq->fl.sdesc[rxq->fl.cidx];
+				bufsz = get_buf_size(adapter, rsd);
+				fp->page = rsd->page;
+				fp->offset = q->offset;
+				fp->size = min(bufsz, len);
+				len -= fp->size;
+				if (!len)
+					break;
+				unmap_rx_buf(q->adap, &rxq->fl);
+			}
+
+			si.sgetstamp = SGE_TIMESTAMP_G(
+					be64_to_cpu(rc->last_flit));
+			/*
+			 * Last buffer remains mapped so explicitly make it
+			 * coherent for CPU access.
+			 */
+			dma_sync_single_for_cpu(q->adap->pdev_dev,
+						get_buf_addr(rsd),
+						fp->size, DMA_FROM_DEVICE);
+
+			si.va = page_address(si.frags[0].page) +
+				si.frags[0].offset;
+			prefetch(si.va);
+
+			si.nfrags = frags + 1;
+			ret = q->handler(q, q->cur_desc, &si);
+			if (likely(ret == 0))
+				q->offset += ALIGN(fp->size, s->fl_align);
+			else
+				restore_rx_bufs(&si, &rxq->fl, frags);
+		} else if (likely(rsp_type == RSPD_TYPE_CPL_X)) {
+			ret = q->handler(q, q->cur_desc, NULL);
+		} else {
+			ret = q->handler(q, (const __be64 *)rc, CXGB4_MSG_AN);
+		}
+
+		if (unlikely(ret)) {
+			/* couldn't process descriptor, back off for recovery */
+			q->next_intr_params = QINTR_TIMER_IDX_V(NOMEM_TMR_IDX);
+			break;
+		}
+
+		rspq_next(q);
+		budget_left--;
+	}
+
+	if (q->offset >= 0 && fl_cap(&rxq->fl) - rxq->fl.avail >= 16)
+		__refill_fl(q->adap, &rxq->fl);
+	return budget - budget_left;
+}
+
+/**
+ *	napi_rx_handler - the NAPI handler for Rx processing
+ *	@napi: the napi instance
+ *	@budget: how many packets we can process in this round
+ *
+ *	Handler for new data events when using NAPI.  This does not need any
+ *	locking or protection from interrupts as data interrupts are off at
+ *	this point and other adapter interrupts do not interfere (the latter
+ *	in not a concern at all with MSI-X as non-data interrupts then have
+ *	a separate handler).
+ */
+static int napi_rx_handler(struct napi_struct *napi, int budget)
+{
+	unsigned int params;
+	struct sge_rspq *q = container_of(napi, struct sge_rspq, napi);
+	int work_done;
+	u32 val;
+
+	work_done = process_responses(q, budget);
+	if (likely(work_done < budget)) {
+		int timer_index;
+
+		napi_complete_done(napi, work_done);
+		timer_index = QINTR_TIMER_IDX_G(q->next_intr_params);
+
+		if (q->adaptive_rx) {
+			if (work_done > max(timer_pkt_quota[timer_index],
+					    MIN_NAPI_WORK))
+				timer_index = (timer_index + 1);
+			else
+				timer_index = timer_index - 1;
+
+			timer_index = clamp(timer_index, 0, SGE_TIMERREGS - 1);
+			q->next_intr_params =
+					QINTR_TIMER_IDX_V(timer_index) |
+					QINTR_CNT_EN_V(0);
+			params = q->next_intr_params;
+		} else {
+			params = q->next_intr_params;
+			q->next_intr_params = q->intr_params;
+		}
+	} else
+		params = QINTR_TIMER_IDX_V(7);
+
+	val = CIDXINC_V(work_done) | SEINTARM_V(params);
+
+	/* If we don't have access to the new User GTS (T5+), use the old
+	 * doorbell mechanism; otherwise use the new BAR2 mechanism.
+	 */
+	if (unlikely(q->bar2_addr == NULL)) {
+		t4_write_reg(q->adap, MYPF_REG(SGE_PF_GTS_A),
+			     val | INGRESSQID_V((u32)q->cntxt_id));
+	} else {
+		writel(val | INGRESSQID_V(q->bar2_qid),
+		       q->bar2_addr + SGE_UDB_GTS);
+		wmb();
+	}
+	return work_done;
+}
+
+void cxgb4_ethofld_restart(struct tasklet_struct *t)
+{
+	struct sge_eosw_txq *eosw_txq = from_tasklet(eosw_txq, t,
+						     qresume_tsk);
+	int pktcount;
+
+	spin_lock(&eosw_txq->lock);
+	pktcount = eosw_txq->cidx - eosw_txq->last_cidx;
+	if (pktcount < 0)
+		pktcount += eosw_txq->ndesc;
+
+	if (pktcount) {
+		cxgb4_eosw_txq_free_desc(netdev2adap(eosw_txq->netdev),
+					 eosw_txq, pktcount);
+		eosw_txq->inuse -= pktcount;
+	}
+
+	/* There may be some packets waiting for completions. So,
+	 * attempt to send these packets now.
+	 */
+	ethofld_xmit(eosw_txq->netdev, eosw_txq);
+	spin_unlock(&eosw_txq->lock);
+}
+
+/* cxgb4_ethofld_rx_handler - Process ETHOFLD Tx completions
+ * @q: the response queue that received the packet
+ * @rsp: the response queue descriptor holding the CPL message
+ * @si: the gather list of packet fragments
+ *
+ * Process a ETHOFLD Tx completion. Increment the cidx here, but
+ * free up the descriptors in a tasklet later.
+ */
+int cxgb4_ethofld_rx_handler(struct sge_rspq *q, const __be64 *rsp,
+			     const struct pkt_gl *si)
+{
+	u8 opcode = ((const struct rss_header *)rsp)->opcode;
+
+	/* skip RSS header */
+	rsp++;
+
+	if (opcode == CPL_FW4_ACK) {
+		const struct cpl_fw4_ack *cpl;
+		struct sge_eosw_txq *eosw_txq;
+		struct eotid_entry *entry;
+		struct sk_buff *skb;
+		u32 hdr_len, eotid;
+		u8 flits, wrlen16;
+		int credits;
+
+		cpl = (const struct cpl_fw4_ack *)rsp;
+		eotid = CPL_FW4_ACK_FLOWID_G(ntohl(OPCODE_TID(cpl))) -
+			q->adap->tids.eotid_base;
+		entry = cxgb4_lookup_eotid(&q->adap->tids, eotid);
+		if (!entry)
+			goto out_done;
+
+		eosw_txq = (struct sge_eosw_txq *)entry->data;
+		if (!eosw_txq)
+			goto out_done;
+
+		spin_lock(&eosw_txq->lock);
+		credits = cpl->credits;
+		while (credits > 0) {
+			skb = eosw_txq->desc[eosw_txq->cidx].skb;
+			if (!skb)
+				break;
+
+			if (unlikely((eosw_txq->state ==
+				      CXGB4_EO_STATE_FLOWC_OPEN_REPLY ||
+				      eosw_txq->state ==
+				      CXGB4_EO_STATE_FLOWC_CLOSE_REPLY) &&
+				     eosw_txq->cidx == eosw_txq->flowc_idx)) {
+				flits = DIV_ROUND_UP(skb->len, 8);
+				if (eosw_txq->state ==
+				    CXGB4_EO_STATE_FLOWC_OPEN_REPLY)
+					eosw_txq->state = CXGB4_EO_STATE_ACTIVE;
+				else
+					eosw_txq->state = CXGB4_EO_STATE_CLOSED;
+				complete(&eosw_txq->completion);
+			} else {
+				hdr_len = eth_get_headlen(eosw_txq->netdev,
+							  skb->data,
+							  skb_headlen(skb));
+				flits = ethofld_calc_tx_flits(q->adap, skb,
+							      hdr_len);
+			}
+			eosw_txq_advance_index(&eosw_txq->cidx, 1,
+					       eosw_txq->ndesc);
+			wrlen16 = DIV_ROUND_UP(flits * 8, 16);
+			credits -= wrlen16;
+		}
+
+		eosw_txq->cred += cpl->credits;
+		eosw_txq->ncompl--;
+
+		spin_unlock(&eosw_txq->lock);
+
+		/* Schedule a tasklet to reclaim SKBs and restart ETHOFLD Tx,
+		 * if there were packets waiting for completion.
+		 */
+		tasklet_schedule(&eosw_txq->qresume_tsk);
+	}
+
+out_done:
+	return 0;
+}
+
+/*
+ * The MSI-X interrupt handler for an SGE response queue.
+ */
+irqreturn_t t4_sge_intr_msix(int irq, void *cookie)
+{
+	struct sge_rspq *q = cookie;
+
+	napi_schedule(&q->napi);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Process the indirect interrupt entries in the interrupt queue and kick off
+ * NAPI for each queue that has generated an entry.
+ */
+static unsigned int process_intrq(struct adapter *adap)
+{
+	unsigned int credits;
+	const struct rsp_ctrl *rc;
+	struct sge_rspq *q = &adap->sge.intrq;
+	u32 val;
+
+	spin_lock(&adap->sge.intrq_lock);
+	for (credits = 0; ; credits++) {
+		rc = (void *)q->cur_desc + (q->iqe_len - sizeof(*rc));
+		if (!is_new_response(rc, q))
+			break;
+
+		dma_rmb();
+		if (RSPD_TYPE_G(rc->type_gen) == RSPD_TYPE_INTR_X) {
+			unsigned int qid = ntohl(rc->pldbuflen_qid);
+
+			qid -= adap->sge.ingr_start;
+			napi_schedule(&adap->sge.ingr_map[qid]->napi);
+		}
+
+		rspq_next(q);
+	}
+
+	val =  CIDXINC_V(credits) | SEINTARM_V(q->intr_params);
+
+	/* If we don't have access to the new User GTS (T5+), use the old
+	 * doorbell mechanism; otherwise use the new BAR2 mechanism.
+	 */
+	if (unlikely(q->bar2_addr == NULL)) {
+		t4_write_reg(adap, MYPF_REG(SGE_PF_GTS_A),
+			     val | INGRESSQID_V(q->cntxt_id));
+	} else {
+		writel(val | INGRESSQID_V(q->bar2_qid),
+		       q->bar2_addr + SGE_UDB_GTS);
+		wmb();
+	}
+	spin_unlock(&adap->sge.intrq_lock);
+	return credits;
+}
+
+/*
+ * The MSI interrupt handler, which handles data events from SGE response queues
+ * as well as error and other async events as they all use the same MSI vector.
+ */
+static irqreturn_t t4_intr_msi(int irq, void *cookie)
+{
+	struct adapter *adap = cookie;
+
+	if (adap->flags & CXGB4_MASTER_PF)
+		t4_slow_intr_handler(adap);
+	process_intrq(adap);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Interrupt handler for legacy INTx interrupts.
+ * Handles data events from SGE response queues as well as error and other
+ * async events as they all use the same interrupt line.
+ */
+static irqreturn_t t4_intr_intx(int irq, void *cookie)
+{
+	struct adapter *adap = cookie;
+
+	t4_write_reg(adap, MYPF_REG(PCIE_PF_CLI_A), 0);
+	if (((adap->flags & CXGB4_MASTER_PF) && t4_slow_intr_handler(adap)) |
+	    process_intrq(adap))
+		return IRQ_HANDLED;
+	return IRQ_NONE;             /* probably shared interrupt */
+}
+
+/**
+ *	t4_intr_handler - select the top-level interrupt handler
+ *	@adap: the adapter
+ *
+ *	Selects the top-level interrupt handler based on the type of interrupts
+ *	(MSI-X, MSI, or INTx).
+ */
+irq_handler_t t4_intr_handler(struct adapter *adap)
+{
+	if (adap->flags & CXGB4_USING_MSIX)
+		return t4_sge_intr_msix;
+	if (adap->flags & CXGB4_USING_MSI)
+		return t4_intr_msi;
+	return t4_intr_intx;
+}
+
+static void sge_rx_timer_cb(struct timer_list *t)
+{
+	unsigned long m;
+	unsigned int i;
+	struct adapter *adap = from_timer(adap, t, sge.rx_timer);
+	struct sge *s = &adap->sge;
+
+	for (i = 0; i < BITS_TO_LONGS(s->egr_sz); i++)
+		for (m = s->starving_fl[i]; m; m &= m - 1) {
+			struct sge_eth_rxq *rxq;
+			unsigned int id = __ffs(m) + i * BITS_PER_LONG;
+			struct sge_fl *fl = s->egr_map[id];
+
+			clear_bit(id, s->starving_fl);
+			smp_mb__after_atomic();
+
+			if (fl_starving(adap, fl)) {
+				rxq = container_of(fl, struct sge_eth_rxq, fl);
+				if (napi_reschedule(&rxq->rspq.napi))
+					fl->starving++;
+				else
+					set_bit(id, s->starving_fl);
+			}
+		}
+	/* The remainder of the SGE RX Timer Callback routine is dedicated to
+	 * global Master PF activities like checking for chip ingress stalls,
+	 * etc.
+	 */
+	if (!(adap->flags & CXGB4_MASTER_PF))
+		goto done;
+
+	t4_idma_monitor(adap, &s->idma_monitor, HZ, RX_QCHECK_PERIOD);
+
+done:
+	mod_timer(&s->rx_timer, jiffies + RX_QCHECK_PERIOD);
+}
+
+static void sge_tx_timer_cb(struct timer_list *t)
+{
+	struct adapter *adap = from_timer(adap, t, sge.tx_timer);
+	struct sge *s = &adap->sge;
+	unsigned long m, period;
+	unsigned int i, budget;
+
+	for (i = 0; i < BITS_TO_LONGS(s->egr_sz); i++)
+		for (m = s->txq_maperr[i]; m; m &= m - 1) {
+			unsigned long id = __ffs(m) + i * BITS_PER_LONG;
+			struct sge_uld_txq *txq = s->egr_map[id];
+
+			clear_bit(id, s->txq_maperr);
+			tasklet_schedule(&txq->qresume_tsk);
+		}
+
+	if (!is_t4(adap->params.chip)) {
+		struct sge_eth_txq *q = &s->ptptxq;
+		int avail;
+
+		spin_lock(&adap->ptp_lock);
+		avail = reclaimable(&q->q);
+
+		if (avail) {
+			free_tx_desc(adap, &q->q, avail, false);
+			q->q.in_use -= avail;
+		}
+		spin_unlock(&adap->ptp_lock);
+	}
+
+	budget = MAX_TIMER_TX_RECLAIM;
+	i = s->ethtxq_rover;
+	do {
+		budget -= t4_sge_eth_txq_egress_update(adap, &s->ethtxq[i],
+						       budget);
+		if (!budget)
+			break;
+
+		if (++i >= s->ethqsets)
+			i = 0;
+	} while (i != s->ethtxq_rover);
+	s->ethtxq_rover = i;
+
+	if (budget == 0) {
+		/* If we found too many reclaimable packets schedule a timer
+		 * in the near future to continue where we left off.
+		 */
+		period = 2;
+	} else {
+		/* We reclaimed all reclaimable TX Descriptors, so reschedule
+		 * at the normal period.
+		 */
+		period = TX_QCHECK_PERIOD;
+	}
+
+	mod_timer(&s->tx_timer, jiffies + period);
+}
+
+/**
+ *	bar2_address - return the BAR2 address for an SGE Queue's Registers
+ *	@adapter: the adapter
+ *	@qid: the SGE Queue ID
+ *	@qtype: the SGE Queue Type (Egress or Ingress)
+ *	@pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
+ *
+ *	Returns the BAR2 address for the SGE Queue Registers associated with
+ *	@qid.  If BAR2 SGE Registers aren't available, returns NULL.  Also
+ *	returns the BAR2 Queue ID to be used with writes to the BAR2 SGE
+ *	Queue Registers.  If the BAR2 Queue ID is 0, then "Inferred Queue ID"
+ *	Registers are supported (e.g. the Write Combining Doorbell Buffer).
+ */
+static void __iomem *bar2_address(struct adapter *adapter,
+				  unsigned int qid,
+				  enum t4_bar2_qtype qtype,
+				  unsigned int *pbar2_qid)
+{
+	u64 bar2_qoffset;
+	int ret;
+
+	ret = t4_bar2_sge_qregs(adapter, qid, qtype, 0,
+				&bar2_qoffset, pbar2_qid);
+	if (ret)
+		return NULL;
+
+	return adapter->bar2 + bar2_qoffset;
+}
+
+/* @intr_idx: MSI/MSI-X vector if >=0, -(absolute qid + 1) if < 0
+ * @cong: < 0 -> no congestion feedback, >= 0 -> congestion channel map
+ */
+int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
+		     struct net_device *dev, int intr_idx,
+		     struct sge_fl *fl, rspq_handler_t hnd,
+		     rspq_flush_handler_t flush_hnd, int cong)
+{
+	int ret, flsz = 0;
+	struct fw_iq_cmd c;
+	struct sge *s = &adap->sge;
+	struct port_info *pi = netdev_priv(dev);
+	int relaxed = !(adap->flags & CXGB4_ROOT_NO_RELAXED_ORDERING);
+
+	/* Size needs to be multiple of 16, including status entry. */
+	iq->size = roundup(iq->size, 16);
+
+	iq->desc = alloc_ring(adap->pdev_dev, iq->size, iq->iqe_len, 0,
+			      &iq->phys_addr, NULL, 0,
+			      dev_to_node(adap->pdev_dev));
+	if (!iq->desc)
+		return -ENOMEM;
+
+	memset(&c, 0, sizeof(c));
+	c.op_to_vfn = htonl(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F |
+			    FW_CMD_WRITE_F | FW_CMD_EXEC_F |
+			    FW_IQ_CMD_PFN_V(adap->pf) | FW_IQ_CMD_VFN_V(0));
+	c.alloc_to_len16 = htonl(FW_IQ_CMD_ALLOC_F | FW_IQ_CMD_IQSTART_F |
+				 FW_LEN16(c));
+	c.type_to_iqandstindex = htonl(FW_IQ_CMD_TYPE_V(FW_IQ_TYPE_FL_INT_CAP) |
+		FW_IQ_CMD_IQASYNCH_V(fwevtq) | FW_IQ_CMD_VIID_V(pi->viid) |
+		FW_IQ_CMD_IQANDST_V(intr_idx < 0) |
+		FW_IQ_CMD_IQANUD_V(UPDATEDELIVERY_INTERRUPT_X) |
+		FW_IQ_CMD_IQANDSTINDEX_V(intr_idx >= 0 ? intr_idx :
+							-intr_idx - 1));
+	c.iqdroprss_to_iqesize = htons(FW_IQ_CMD_IQPCIECH_V(pi->tx_chan) |
+		FW_IQ_CMD_IQGTSMODE_F |
+		FW_IQ_CMD_IQINTCNTTHRESH_V(iq->pktcnt_idx) |
+		FW_IQ_CMD_IQESIZE_V(ilog2(iq->iqe_len) - 4));
+	c.iqsize = htons(iq->size);
+	c.iqaddr = cpu_to_be64(iq->phys_addr);
+	if (cong >= 0)
+		c.iqns_to_fl0congen = htonl(FW_IQ_CMD_IQFLINTCONGEN_F |
+				FW_IQ_CMD_IQTYPE_V(cong ? FW_IQ_IQTYPE_NIC
+							:  FW_IQ_IQTYPE_OFLD));
+
+	if (fl) {
+		unsigned int chip_ver =
+			CHELSIO_CHIP_VERSION(adap->params.chip);
+
+		/* Allocate the ring for the hardware free list (with space
+		 * for its status page) along with the associated software
+		 * descriptor ring.  The free list size needs to be a multiple
+		 * of the Egress Queue Unit and at least 2 Egress Units larger
+		 * than the SGE's Egress Congrestion Threshold
+		 * (fl_starve_thres - 1).
+		 */
+		if (fl->size < s->fl_starve_thres - 1 + 2 * 8)
+			fl->size = s->fl_starve_thres - 1 + 2 * 8;
+		fl->size = roundup(fl->size, 8);
+		fl->desc = alloc_ring(adap->pdev_dev, fl->size, sizeof(__be64),
+				      sizeof(struct rx_sw_desc), &fl->addr,
+				      &fl->sdesc, s->stat_len,
+				      dev_to_node(adap->pdev_dev));
+		if (!fl->desc)
+			goto fl_nomem;
+
+		flsz = fl->size / 8 + s->stat_len / sizeof(struct tx_desc);
+		c.iqns_to_fl0congen |= htonl(FW_IQ_CMD_FL0PACKEN_F |
+					     FW_IQ_CMD_FL0FETCHRO_V(relaxed) |
+					     FW_IQ_CMD_FL0DATARO_V(relaxed) |
+					     FW_IQ_CMD_FL0PADEN_F);
+		if (cong >= 0)
+			c.iqns_to_fl0congen |=
+				htonl(FW_IQ_CMD_FL0CNGCHMAP_V(cong) |
+				      FW_IQ_CMD_FL0CONGCIF_F |
+				      FW_IQ_CMD_FL0CONGEN_F);
+		/* In T6, for egress queue type FL there is internal overhead
+		 * of 16B for header going into FLM module.  Hence the maximum
+		 * allowed burst size is 448 bytes.  For T4/T5, the hardware
+		 * doesn't coalesce fetch requests if more than 64 bytes of
+		 * Free List pointers are provided, so we use a 128-byte Fetch
+		 * Burst Minimum there (T6 implements coalescing so we can use
+		 * the smaller 64-byte value there).
+		 */
+		c.fl0dcaen_to_fl0cidxfthresh =
+			htons(FW_IQ_CMD_FL0FBMIN_V(chip_ver <= CHELSIO_T5 ?
+						   FETCHBURSTMIN_128B_X :
+						   FETCHBURSTMIN_64B_T6_X) |
+			      FW_IQ_CMD_FL0FBMAX_V((chip_ver <= CHELSIO_T5) ?
+						   FETCHBURSTMAX_512B_X :
+						   FETCHBURSTMAX_256B_X));
+		c.fl0size = htons(flsz);
+		c.fl0addr = cpu_to_be64(fl->addr);
+	}
+
+	ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
+	if (ret)
+		goto err;
+
+	netif_napi_add(dev, &iq->napi, napi_rx_handler);
+	iq->cur_desc = iq->desc;
+	iq->cidx = 0;
+	iq->gen = 1;
+	iq->next_intr_params = iq->intr_params;
+	iq->cntxt_id = ntohs(c.iqid);
+	iq->abs_id = ntohs(c.physiqid);
+	iq->bar2_addr = bar2_address(adap,
+				     iq->cntxt_id,
+				     T4_BAR2_QTYPE_INGRESS,
+				     &iq->bar2_qid);
+	iq->size--;                           /* subtract status entry */
+	iq->netdev = dev;
+	iq->handler = hnd;
+	iq->flush_handler = flush_hnd;
+
+	memset(&iq->lro_mgr, 0, sizeof(struct t4_lro_mgr));
+	skb_queue_head_init(&iq->lro_mgr.lroq);
+
+	/* set offset to -1 to distinguish ingress queues without FL */
+	iq->offset = fl ? 0 : -1;
+
+	adap->sge.ingr_map[iq->cntxt_id - adap->sge.ingr_start] = iq;
+
+	if (fl) {
+		fl->cntxt_id = ntohs(c.fl0id);
+		fl->avail = fl->pend_cred = 0;
+		fl->pidx = fl->cidx = 0;
+		fl->alloc_failed = fl->large_alloc_failed = fl->starving = 0;
+		adap->sge.egr_map[fl->cntxt_id - adap->sge.egr_start] = fl;
+
+		/* Note, we must initialize the BAR2 Free List User Doorbell
+		 * information before refilling the Free List!
+		 */
+		fl->bar2_addr = bar2_address(adap,
+					     fl->cntxt_id,
+					     T4_BAR2_QTYPE_EGRESS,
+					     &fl->bar2_qid);
+		refill_fl(adap, fl, fl_cap(fl), GFP_KERNEL);
+	}
+
+	/* For T5 and later we attempt to set up the Congestion Manager values
+	 * of the new RX Ethernet Queue.  This should really be handled by
+	 * firmware because it's more complex than any host driver wants to
+	 * get involved with and it's different per chip and this is almost
+	 * certainly wrong.  Firmware would be wrong as well, but it would be
+	 * a lot easier to fix in one place ...  For now we do something very
+	 * simple (and hopefully less wrong).
+	 */
+	if (!is_t4(adap->params.chip) && cong >= 0) {
+		u32 param, val, ch_map = 0;
+		int i;
+		u16 cng_ch_bits_log = adap->params.arch.cng_ch_bits_log;
+
+		param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
+			 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DMAQ_CONM_CTXT) |
+			 FW_PARAMS_PARAM_YZ_V(iq->cntxt_id));
+		if (cong == 0) {
+			val = CONMCTXT_CNGTPMODE_V(CONMCTXT_CNGTPMODE_QUEUE_X);
+		} else {
+			val =
+			    CONMCTXT_CNGTPMODE_V(CONMCTXT_CNGTPMODE_CHANNEL_X);
+			for (i = 0; i < 4; i++) {
+				if (cong & (1 << i))
+					ch_map |= 1 << (i << cng_ch_bits_log);
+			}
+			val |= CONMCTXT_CNGCHMAP_V(ch_map);
+		}
+		ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1,
+				    &param, &val);
+		if (ret)
+			dev_warn(adap->pdev_dev, "Failed to set Congestion"
+				 " Manager Context for Ingress Queue %d: %d\n",
+				 iq->cntxt_id, -ret);
+	}
+
+	return 0;
+
+fl_nomem:
+	ret = -ENOMEM;
+err:
+	if (iq->desc) {
+		dma_free_coherent(adap->pdev_dev, iq->size * iq->iqe_len,
+				  iq->desc, iq->phys_addr);
+		iq->desc = NULL;
+	}
+	if (fl && fl->desc) {
+		kfree(fl->sdesc);
+		fl->sdesc = NULL;
+		dma_free_coherent(adap->pdev_dev, flsz * sizeof(struct tx_desc),
+				  fl->desc, fl->addr);
+		fl->desc = NULL;
+	}
+	return ret;
+}
+
+static void init_txq(struct adapter *adap, struct sge_txq *q, unsigned int id)
+{
+	q->cntxt_id = id;
+	q->bar2_addr = bar2_address(adap,
+				    q->cntxt_id,
+				    T4_BAR2_QTYPE_EGRESS,
+				    &q->bar2_qid);
+	q->in_use = 0;
+	q->cidx = q->pidx = 0;
+	q->stops = q->restarts = 0;
+	q->stat = (void *)&q->desc[q->size];
+	spin_lock_init(&q->db_lock);
+	adap->sge.egr_map[id - adap->sge.egr_start] = q;
+}
+
+/**
+ *	t4_sge_alloc_eth_txq - allocate an Ethernet TX Queue
+ *	@adap: the adapter
+ *	@txq: the SGE Ethernet TX Queue to initialize
+ *	@dev: the Linux Network Device
+ *	@netdevq: the corresponding Linux TX Queue
+ *	@iqid: the Ingress Queue to which to deliver CIDX Update messages
+ *	@dbqt: whether this TX Queue will use the SGE Doorbell Queue Timers
+ */
+int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
+			 struct net_device *dev, struct netdev_queue *netdevq,
+			 unsigned int iqid, u8 dbqt)
+{
+	unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
+	struct port_info *pi = netdev_priv(dev);
+	struct sge *s = &adap->sge;
+	struct fw_eq_eth_cmd c;
+	int ret, nentries;
+
+	/* Add status entries */
+	nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
+
+	txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size,
+			sizeof(struct tx_desc), sizeof(struct tx_sw_desc),
+			&txq->q.phys_addr, &txq->q.sdesc, s->stat_len,
+			netdev_queue_numa_node_read(netdevq));
+	if (!txq->q.desc)
+		return -ENOMEM;
+
+	memset(&c, 0, sizeof(c));
+	c.op_to_vfn = htonl(FW_CMD_OP_V(FW_EQ_ETH_CMD) | FW_CMD_REQUEST_F |
+			    FW_CMD_WRITE_F | FW_CMD_EXEC_F |
+			    FW_EQ_ETH_CMD_PFN_V(adap->pf) |
+			    FW_EQ_ETH_CMD_VFN_V(0));
+	c.alloc_to_len16 = htonl(FW_EQ_ETH_CMD_ALLOC_F |
+				 FW_EQ_ETH_CMD_EQSTART_F | FW_LEN16(c));
+
+	/* For TX Ethernet Queues using the SGE Doorbell Queue Timer
+	 * mechanism, we use Ingress Queue messages for Hardware Consumer
+	 * Index Updates on the TX Queue.  Otherwise we have the Hardware
+	 * write the CIDX Updates into the Status Page at the end of the
+	 * TX Queue.
+	 */
+	c.autoequiqe_to_viid = htonl(((chip_ver <= CHELSIO_T5) ?
+				      FW_EQ_ETH_CMD_AUTOEQUIQE_F :
+				      FW_EQ_ETH_CMD_AUTOEQUEQE_F) |
+				     FW_EQ_ETH_CMD_VIID_V(pi->viid));
+
+	c.fetchszm_to_iqid =
+		htonl(FW_EQ_ETH_CMD_HOSTFCMODE_V((chip_ver <= CHELSIO_T5) ?
+						 HOSTFCMODE_INGRESS_QUEUE_X :
+						 HOSTFCMODE_STATUS_PAGE_X) |
+		      FW_EQ_ETH_CMD_PCIECHN_V(pi->tx_chan) |
+		      FW_EQ_ETH_CMD_FETCHRO_F | FW_EQ_ETH_CMD_IQID_V(iqid));
+
+	/* Note that the CIDX Flush Threshold should match MAX_TX_RECLAIM. */
+	c.dcaen_to_eqsize =
+		htonl(FW_EQ_ETH_CMD_FBMIN_V(chip_ver <= CHELSIO_T5
+					    ? FETCHBURSTMIN_64B_X
+					    : FETCHBURSTMIN_64B_T6_X) |
+		      FW_EQ_ETH_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) |
+		      FW_EQ_ETH_CMD_CIDXFTHRESH_V(CIDXFLUSHTHRESH_32_X) |
+		      FW_EQ_ETH_CMD_CIDXFTHRESHO_V(chip_ver == CHELSIO_T5) |
+		      FW_EQ_ETH_CMD_EQSIZE_V(nentries));
+
+	c.eqaddr = cpu_to_be64(txq->q.phys_addr);
+
+	/* If we're using the SGE Doorbell Queue Timer mechanism, pass in the
+	 * currently configured Timer Index.  THis can be changed later via an
+	 * ethtool -C tx-usecs {Timer Val} command.  Note that the SGE
+	 * Doorbell Queue mode is currently automatically enabled in the
+	 * Firmware by setting either AUTOEQUEQE or AUTOEQUIQE ...
+	 */
+	if (dbqt)
+		c.timeren_timerix =
+			cpu_to_be32(FW_EQ_ETH_CMD_TIMEREN_F |
+				    FW_EQ_ETH_CMD_TIMERIX_V(txq->dbqtimerix));
+
+	ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
+	if (ret) {
+		kfree(txq->q.sdesc);
+		txq->q.sdesc = NULL;
+		dma_free_coherent(adap->pdev_dev,
+				  nentries * sizeof(struct tx_desc),
+				  txq->q.desc, txq->q.phys_addr);
+		txq->q.desc = NULL;
+		return ret;
+	}
+
+	txq->q.q_type = CXGB4_TXQ_ETH;
+	init_txq(adap, &txq->q, FW_EQ_ETH_CMD_EQID_G(ntohl(c.eqid_pkd)));
+	txq->txq = netdevq;
+	txq->tso = 0;
+	txq->uso = 0;
+	txq->tx_cso = 0;
+	txq->vlan_ins = 0;
+	txq->mapping_err = 0;
+	txq->dbqt = dbqt;
+
+	return 0;
+}
+
+int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
+			  struct net_device *dev, unsigned int iqid,
+			  unsigned int cmplqid)
+{
+	unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
+	struct port_info *pi = netdev_priv(dev);
+	struct sge *s = &adap->sge;
+	struct fw_eq_ctrl_cmd c;
+	int ret, nentries;
+
+	/* Add status entries */
+	nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
+
+	txq->q.desc = alloc_ring(adap->pdev_dev, nentries,
+				 sizeof(struct tx_desc), 0, &txq->q.phys_addr,
+				 NULL, 0, dev_to_node(adap->pdev_dev));
+	if (!txq->q.desc)
+		return -ENOMEM;
+
+	c.op_to_vfn = htonl(FW_CMD_OP_V(FW_EQ_CTRL_CMD) | FW_CMD_REQUEST_F |
+			    FW_CMD_WRITE_F | FW_CMD_EXEC_F |
+			    FW_EQ_CTRL_CMD_PFN_V(adap->pf) |
+			    FW_EQ_CTRL_CMD_VFN_V(0));
+	c.alloc_to_len16 = htonl(FW_EQ_CTRL_CMD_ALLOC_F |
+				 FW_EQ_CTRL_CMD_EQSTART_F | FW_LEN16(c));
+	c.cmpliqid_eqid = htonl(FW_EQ_CTRL_CMD_CMPLIQID_V(cmplqid));
+	c.physeqid_pkd = htonl(0);
+	c.fetchszm_to_iqid =
+		htonl(FW_EQ_CTRL_CMD_HOSTFCMODE_V(HOSTFCMODE_STATUS_PAGE_X) |
+		      FW_EQ_CTRL_CMD_PCIECHN_V(pi->tx_chan) |
+		      FW_EQ_CTRL_CMD_FETCHRO_F | FW_EQ_CTRL_CMD_IQID_V(iqid));
+	c.dcaen_to_eqsize =
+		htonl(FW_EQ_CTRL_CMD_FBMIN_V(chip_ver <= CHELSIO_T5
+					     ? FETCHBURSTMIN_64B_X
+					     : FETCHBURSTMIN_64B_T6_X) |
+		      FW_EQ_CTRL_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) |
+		      FW_EQ_CTRL_CMD_CIDXFTHRESH_V(CIDXFLUSHTHRESH_32_X) |
+		      FW_EQ_CTRL_CMD_EQSIZE_V(nentries));
+	c.eqaddr = cpu_to_be64(txq->q.phys_addr);
+
+	ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
+	if (ret) {
+		dma_free_coherent(adap->pdev_dev,
+				  nentries * sizeof(struct tx_desc),
+				  txq->q.desc, txq->q.phys_addr);
+		txq->q.desc = NULL;
+		return ret;
+	}
+
+	txq->q.q_type = CXGB4_TXQ_CTRL;
+	init_txq(adap, &txq->q, FW_EQ_CTRL_CMD_EQID_G(ntohl(c.cmpliqid_eqid)));
+	txq->adap = adap;
+	skb_queue_head_init(&txq->sendq);
+	tasklet_setup(&txq->qresume_tsk, restart_ctrlq);
+	txq->full = 0;
+	return 0;
+}
+
+int t4_sge_mod_ctrl_txq(struct adapter *adap, unsigned int eqid,
+			unsigned int cmplqid)
+{
+	u32 param, val;
+
+	param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
+		 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DMAQ_EQ_CMPLIQID_CTRL) |
+		 FW_PARAMS_PARAM_YZ_V(eqid));
+	val = cmplqid;
+	return t4_set_params(adap, adap->mbox, adap->pf, 0, 1, &param, &val);
+}
+
+static int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_txq *q,
+				 struct net_device *dev, u32 cmd, u32 iqid)
+{
+	unsigned int chip_ver = CHELSIO_CHIP_VERSION(adap->params.chip);
+	struct port_info *pi = netdev_priv(dev);
+	struct sge *s = &adap->sge;
+	struct fw_eq_ofld_cmd c;
+	u32 fb_min, nentries;
+	int ret;
+
+	/* Add status entries */
+	nentries = q->size + s->stat_len / sizeof(struct tx_desc);
+	q->desc = alloc_ring(adap->pdev_dev, q->size, sizeof(struct tx_desc),
+			     sizeof(struct tx_sw_desc), &q->phys_addr,
+			     &q->sdesc, s->stat_len, NUMA_NO_NODE);
+	if (!q->desc)
+		return -ENOMEM;
+
+	if (chip_ver <= CHELSIO_T5)
+		fb_min = FETCHBURSTMIN_64B_X;
+	else
+		fb_min = FETCHBURSTMIN_64B_T6_X;
+
+	memset(&c, 0, sizeof(c));
+	c.op_to_vfn = htonl(FW_CMD_OP_V(cmd) | FW_CMD_REQUEST_F |
+			    FW_CMD_WRITE_F | FW_CMD_EXEC_F |
+			    FW_EQ_OFLD_CMD_PFN_V(adap->pf) |
+			    FW_EQ_OFLD_CMD_VFN_V(0));
+	c.alloc_to_len16 = htonl(FW_EQ_OFLD_CMD_ALLOC_F |
+				 FW_EQ_OFLD_CMD_EQSTART_F | FW_LEN16(c));
+	c.fetchszm_to_iqid =
+		htonl(FW_EQ_OFLD_CMD_HOSTFCMODE_V(HOSTFCMODE_STATUS_PAGE_X) |
+		      FW_EQ_OFLD_CMD_PCIECHN_V(pi->tx_chan) |
+		      FW_EQ_OFLD_CMD_FETCHRO_F | FW_EQ_OFLD_CMD_IQID_V(iqid));
+	c.dcaen_to_eqsize =
+		htonl(FW_EQ_OFLD_CMD_FBMIN_V(fb_min) |
+		      FW_EQ_OFLD_CMD_FBMAX_V(FETCHBURSTMAX_512B_X) |
+		      FW_EQ_OFLD_CMD_CIDXFTHRESH_V(CIDXFLUSHTHRESH_32_X) |
+		      FW_EQ_OFLD_CMD_EQSIZE_V(nentries));
+	c.eqaddr = cpu_to_be64(q->phys_addr);
+
+	ret = t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), &c);
+	if (ret) {
+		kfree(q->sdesc);
+		q->sdesc = NULL;
+		dma_free_coherent(adap->pdev_dev,
+				  nentries * sizeof(struct tx_desc),
+				  q->desc, q->phys_addr);
+		q->desc = NULL;
+		return ret;
+	}
+
+	init_txq(adap, q, FW_EQ_OFLD_CMD_EQID_G(ntohl(c.eqid_pkd)));
+	return 0;
+}
+
+int t4_sge_alloc_uld_txq(struct adapter *adap, struct sge_uld_txq *txq,
+			 struct net_device *dev, unsigned int iqid,
+			 unsigned int uld_type)
+{
+	u32 cmd = FW_EQ_OFLD_CMD;
+	int ret;
+
+	if (unlikely(uld_type == CXGB4_TX_CRYPTO))
+		cmd = FW_EQ_CTRL_CMD;
+
+	ret = t4_sge_alloc_ofld_txq(adap, &txq->q, dev, cmd, iqid);
+	if (ret)
+		return ret;
+
+	txq->q.q_type = CXGB4_TXQ_ULD;
+	txq->adap = adap;
+	skb_queue_head_init(&txq->sendq);
+	tasklet_setup(&txq->qresume_tsk, restart_ofldq);
+	txq->full = 0;
+	txq->mapping_err = 0;
+	return 0;
+}
+
+int t4_sge_alloc_ethofld_txq(struct adapter *adap, struct sge_eohw_txq *txq,
+			     struct net_device *dev, u32 iqid)
+{
+	int ret;
+
+	ret = t4_sge_alloc_ofld_txq(adap, &txq->q, dev, FW_EQ_OFLD_CMD, iqid);
+	if (ret)
+		return ret;
+
+	txq->q.q_type = CXGB4_TXQ_ULD;
+	spin_lock_init(&txq->lock);
+	txq->adap = adap;
+	txq->tso = 0;
+	txq->uso = 0;
+	txq->tx_cso = 0;
+	txq->vlan_ins = 0;
+	txq->mapping_err = 0;
+	return 0;
+}
+
+void free_txq(struct adapter *adap, struct sge_txq *q)
+{
+	struct sge *s = &adap->sge;
+
+	dma_free_coherent(adap->pdev_dev,
+			  q->size * sizeof(struct tx_desc) + s->stat_len,
+			  q->desc, q->phys_addr);
+	q->cntxt_id = 0;
+	q->sdesc = NULL;
+	q->desc = NULL;
+}
+
+void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq,
+		  struct sge_fl *fl)
+{
+	struct sge *s = &adap->sge;
+	unsigned int fl_id = fl ? fl->cntxt_id : 0xffff;
+
+	adap->sge.ingr_map[rq->cntxt_id - adap->sge.ingr_start] = NULL;
+	t4_iq_free(adap, adap->mbox, adap->pf, 0, FW_IQ_TYPE_FL_INT_CAP,
+		   rq->cntxt_id, fl_id, 0xffff);
+	dma_free_coherent(adap->pdev_dev, (rq->size + 1) * rq->iqe_len,
+			  rq->desc, rq->phys_addr);
+	netif_napi_del(&rq->napi);
+	rq->netdev = NULL;
+	rq->cntxt_id = rq->abs_id = 0;
+	rq->desc = NULL;
+
+	if (fl) {
+		free_rx_bufs(adap, fl, fl->avail);
+		dma_free_coherent(adap->pdev_dev, fl->size * 8 + s->stat_len,
+				  fl->desc, fl->addr);
+		kfree(fl->sdesc);
+		fl->sdesc = NULL;
+		fl->cntxt_id = 0;
+		fl->desc = NULL;
+	}
+}
+
+/**
+ *      t4_free_ofld_rxqs - free a block of consecutive Rx queues
+ *      @adap: the adapter
+ *      @n: number of queues
+ *      @q: pointer to first queue
+ *
+ *      Release the resources of a consecutive block of offload Rx queues.
+ */
+void t4_free_ofld_rxqs(struct adapter *adap, int n, struct sge_ofld_rxq *q)
+{
+	for ( ; n; n--, q++)
+		if (q->rspq.desc)
+			free_rspq_fl(adap, &q->rspq,
+				     q->fl.size ? &q->fl : NULL);
+}
+
+void t4_sge_free_ethofld_txq(struct adapter *adap, struct sge_eohw_txq *txq)
+{
+	if (txq->q.desc) {
+		t4_ofld_eq_free(adap, adap->mbox, adap->pf, 0,
+				txq->q.cntxt_id);
+		free_tx_desc(adap, &txq->q, txq->q.in_use, false);
+		kfree(txq->q.sdesc);
+		free_txq(adap, &txq->q);
+	}
+}
+
+/**
+ *	t4_free_sge_resources - free SGE resources
+ *	@adap: the adapter
+ *
+ *	Frees resources used by the SGE queue sets.
+ */
+void t4_free_sge_resources(struct adapter *adap)
+{
+	int i;
+	struct sge_eth_rxq *eq;
+	struct sge_eth_txq *etq;
+
+	/* stop all Rx queues in order to start them draining */
+	for (i = 0; i < adap->sge.ethqsets; i++) {
+		eq = &adap->sge.ethrxq[i];
+		if (eq->rspq.desc)
+			t4_iq_stop(adap, adap->mbox, adap->pf, 0,
+				   FW_IQ_TYPE_FL_INT_CAP,
+				   eq->rspq.cntxt_id,
+				   eq->fl.size ? eq->fl.cntxt_id : 0xffff,
+				   0xffff);
+	}
+
+	/* clean up Ethernet Tx/Rx queues */
+	for (i = 0; i < adap->sge.ethqsets; i++) {
+		eq = &adap->sge.ethrxq[i];
+		if (eq->rspq.desc)
+			free_rspq_fl(adap, &eq->rspq,
+				     eq->fl.size ? &eq->fl : NULL);
+		if (eq->msix) {
+			cxgb4_free_msix_idx_in_bmap(adap, eq->msix->idx);
+			eq->msix = NULL;
+		}
+
+		etq = &adap->sge.ethtxq[i];
+		if (etq->q.desc) {
+			t4_eth_eq_free(adap, adap->mbox, adap->pf, 0,
+				       etq->q.cntxt_id);
+			__netif_tx_lock_bh(etq->txq);
+			free_tx_desc(adap, &etq->q, etq->q.in_use, true);
+			__netif_tx_unlock_bh(etq->txq);
+			kfree(etq->q.sdesc);
+			free_txq(adap, &etq->q);
+		}
+	}
+
+	/* clean up control Tx queues */
+	for (i = 0; i < ARRAY_SIZE(adap->sge.ctrlq); i++) {
+		struct sge_ctrl_txq *cq = &adap->sge.ctrlq[i];
+
+		if (cq->q.desc) {
+			tasklet_kill(&cq->qresume_tsk);
+			t4_ctrl_eq_free(adap, adap->mbox, adap->pf, 0,
+					cq->q.cntxt_id);
+			__skb_queue_purge(&cq->sendq);
+			free_txq(adap, &cq->q);
+		}
+	}
+
+	if (adap->sge.fw_evtq.desc) {
+		free_rspq_fl(adap, &adap->sge.fw_evtq, NULL);
+		if (adap->sge.fwevtq_msix_idx >= 0)
+			cxgb4_free_msix_idx_in_bmap(adap,
+						    adap->sge.fwevtq_msix_idx);
+	}
+
+	if (adap->sge.nd_msix_idx >= 0)
+		cxgb4_free_msix_idx_in_bmap(adap, adap->sge.nd_msix_idx);
+
+	if (adap->sge.intrq.desc)
+		free_rspq_fl(adap, &adap->sge.intrq, NULL);
+
+	if (!is_t4(adap->params.chip)) {
+		etq = &adap->sge.ptptxq;
+		if (etq->q.desc) {
+			t4_eth_eq_free(adap, adap->mbox, adap->pf, 0,
+				       etq->q.cntxt_id);
+			spin_lock_bh(&adap->ptp_lock);
+			free_tx_desc(adap, &etq->q, etq->q.in_use, true);
+			spin_unlock_bh(&adap->ptp_lock);
+			kfree(etq->q.sdesc);
+			free_txq(adap, &etq->q);
+		}
+	}
+
+	/* clear the reverse egress queue map */
+	memset(adap->sge.egr_map, 0,
+	       adap->sge.egr_sz * sizeof(*adap->sge.egr_map));
+}
+
+void t4_sge_start(struct adapter *adap)
+{
+	adap->sge.ethtxq_rover = 0;
+	mod_timer(&adap->sge.rx_timer, jiffies + RX_QCHECK_PERIOD);
+	mod_timer(&adap->sge.tx_timer, jiffies + TX_QCHECK_PERIOD);
+}
+
+/**
+ *	t4_sge_stop - disable SGE operation
+ *	@adap: the adapter
+ *
+ *	Stop tasklets and timers associated with the DMA engine.  Note that
+ *	this is effective only if measures have been taken to disable any HW
+ *	events that may restart them.
+ */
+void t4_sge_stop(struct adapter *adap)
+{
+	int i;
+	struct sge *s = &adap->sge;
+
+	if (s->rx_timer.function)
+		del_timer_sync(&s->rx_timer);
+	if (s->tx_timer.function)
+		del_timer_sync(&s->tx_timer);
+
+	if (is_offload(adap)) {
+		struct sge_uld_txq_info *txq_info;
+
+		txq_info = adap->sge.uld_txq_info[CXGB4_TX_OFLD];
+		if (txq_info) {
+			struct sge_uld_txq *txq = txq_info->uldtxq;
+
+			for_each_ofldtxq(&adap->sge, i) {
+				if (txq->q.desc)
+					tasklet_kill(&txq->qresume_tsk);
+			}
+		}
+	}
+
+	if (is_pci_uld(adap)) {
+		struct sge_uld_txq_info *txq_info;
+
+		txq_info = adap->sge.uld_txq_info[CXGB4_TX_CRYPTO];
+		if (txq_info) {
+			struct sge_uld_txq *txq = txq_info->uldtxq;
+
+			for_each_ofldtxq(&adap->sge, i) {
+				if (txq->q.desc)
+					tasklet_kill(&txq->qresume_tsk);
+			}
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(s->ctrlq); i++) {
+		struct sge_ctrl_txq *cq = &s->ctrlq[i];
+
+		if (cq->q.desc)
+			tasklet_kill(&cq->qresume_tsk);
+	}
+}
+
+/**
+ *	t4_sge_init_soft - grab core SGE values needed by SGE code
+ *	@adap: the adapter
+ *
+ *	We need to grab the SGE operating parameters that we need to have
+ *	in order to do our job and make sure we can live with them.
+ */
+
+static int t4_sge_init_soft(struct adapter *adap)
+{
+	struct sge *s = &adap->sge;
+	u32 fl_small_pg, fl_large_pg, fl_small_mtu, fl_large_mtu;
+	u32 timer_value_0_and_1, timer_value_2_and_3, timer_value_4_and_5;
+	u32 ingress_rx_threshold;
+
+	/*
+	 * Verify that CPL messages are going to the Ingress Queue for
+	 * process_responses() and that only packet data is going to the
+	 * Free Lists.
+	 */
+	if ((t4_read_reg(adap, SGE_CONTROL_A) & RXPKTCPLMODE_F) !=
+	    RXPKTCPLMODE_V(RXPKTCPLMODE_SPLIT_X)) {
+		dev_err(adap->pdev_dev, "bad SGE CPL MODE\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Validate the Host Buffer Register Array indices that we want to
+	 * use ...
+	 *
+	 * XXX Note that we should really read through the Host Buffer Size
+	 * XXX register array and find the indices of the Buffer Sizes which
+	 * XXX meet our needs!
+	 */
+	#define READ_FL_BUF(x) \
+		t4_read_reg(adap, SGE_FL_BUFFER_SIZE0_A+(x)*sizeof(u32))
+
+	fl_small_pg = READ_FL_BUF(RX_SMALL_PG_BUF);
+	fl_large_pg = READ_FL_BUF(RX_LARGE_PG_BUF);
+	fl_small_mtu = READ_FL_BUF(RX_SMALL_MTU_BUF);
+	fl_large_mtu = READ_FL_BUF(RX_LARGE_MTU_BUF);
+
+	/* We only bother using the Large Page logic if the Large Page Buffer
+	 * is larger than our Page Size Buffer.
+	 */
+	if (fl_large_pg <= fl_small_pg)
+		fl_large_pg = 0;
+
+	#undef READ_FL_BUF
+
+	/* The Page Size Buffer must be exactly equal to our Page Size and the
+	 * Large Page Size Buffer should be 0 (per above) or a power of 2.
+	 */
+	if (fl_small_pg != PAGE_SIZE ||
+	    (fl_large_pg & (fl_large_pg-1)) != 0) {
+		dev_err(adap->pdev_dev, "bad SGE FL page buffer sizes [%d, %d]\n",
+			fl_small_pg, fl_large_pg);
+		return -EINVAL;
+	}
+	if (fl_large_pg)
+		s->fl_pg_order = ilog2(fl_large_pg) - PAGE_SHIFT;
+
+	if (fl_small_mtu < FL_MTU_SMALL_BUFSIZE(adap) ||
+	    fl_large_mtu < FL_MTU_LARGE_BUFSIZE(adap)) {
+		dev_err(adap->pdev_dev, "bad SGE FL MTU sizes [%d, %d]\n",
+			fl_small_mtu, fl_large_mtu);
+		return -EINVAL;
+	}
+
+	/*
+	 * Retrieve our RX interrupt holdoff timer values and counter
+	 * threshold values from the SGE parameters.
+	 */
+	timer_value_0_and_1 = t4_read_reg(adap, SGE_TIMER_VALUE_0_AND_1_A);
+	timer_value_2_and_3 = t4_read_reg(adap, SGE_TIMER_VALUE_2_AND_3_A);
+	timer_value_4_and_5 = t4_read_reg(adap, SGE_TIMER_VALUE_4_AND_5_A);
+	s->timer_val[0] = core_ticks_to_us(adap,
+		TIMERVALUE0_G(timer_value_0_and_1));
+	s->timer_val[1] = core_ticks_to_us(adap,
+		TIMERVALUE1_G(timer_value_0_and_1));
+	s->timer_val[2] = core_ticks_to_us(adap,
+		TIMERVALUE2_G(timer_value_2_and_3));
+	s->timer_val[3] = core_ticks_to_us(adap,
+		TIMERVALUE3_G(timer_value_2_and_3));
+	s->timer_val[4] = core_ticks_to_us(adap,
+		TIMERVALUE4_G(timer_value_4_and_5));
+	s->timer_val[5] = core_ticks_to_us(adap,
+		TIMERVALUE5_G(timer_value_4_and_5));
+
+	ingress_rx_threshold = t4_read_reg(adap, SGE_INGRESS_RX_THRESHOLD_A);
+	s->counter_val[0] = THRESHOLD_0_G(ingress_rx_threshold);
+	s->counter_val[1] = THRESHOLD_1_G(ingress_rx_threshold);
+	s->counter_val[2] = THRESHOLD_2_G(ingress_rx_threshold);
+	s->counter_val[3] = THRESHOLD_3_G(ingress_rx_threshold);
+
+	return 0;
+}
+
+/**
+ *     t4_sge_init - initialize SGE
+ *     @adap: the adapter
+ *
+ *     Perform low-level SGE code initialization needed every time after a
+ *     chip reset.
+ */
+int t4_sge_init(struct adapter *adap)
+{
+	struct sge *s = &adap->sge;
+	u32 sge_control, sge_conm_ctrl;
+	int ret, egress_threshold;
+
+	/*
+	 * Ingress Padding Boundary and Egress Status Page Size are set up by
+	 * t4_fixup_host_params().
+	 */
+	sge_control = t4_read_reg(adap, SGE_CONTROL_A);
+	s->pktshift = PKTSHIFT_G(sge_control);
+	s->stat_len = (sge_control & EGRSTATUSPAGESIZE_F) ? 128 : 64;
+
+	s->fl_align = t4_fl_pkt_align(adap);
+	ret = t4_sge_init_soft(adap);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * A FL with <= fl_starve_thres buffers is starving and a periodic
+	 * timer will attempt to refill it.  This needs to be larger than the
+	 * SGE's Egress Congestion Threshold.  If it isn't, then we can get
+	 * stuck waiting for new packets while the SGE is waiting for us to
+	 * give it more Free List entries.  (Note that the SGE's Egress
+	 * Congestion Threshold is in units of 2 Free List pointers.) For T4,
+	 * there was only a single field to control this.  For T5 there's the
+	 * original field which now only applies to Unpacked Mode Free List
+	 * buffers and a new field which only applies to Packed Mode Free List
+	 * buffers.
+	 */
+	sge_conm_ctrl = t4_read_reg(adap, SGE_CONM_CTRL_A);
+	switch (CHELSIO_CHIP_VERSION(adap->params.chip)) {
+	case CHELSIO_T4:
+		egress_threshold = EGRTHRESHOLD_G(sge_conm_ctrl);
+		break;
+	case CHELSIO_T5:
+		egress_threshold = EGRTHRESHOLDPACKING_G(sge_conm_ctrl);
+		break;
+	case CHELSIO_T6:
+		egress_threshold = T6_EGRTHRESHOLDPACKING_G(sge_conm_ctrl);
+		break;
+	default:
+		dev_err(adap->pdev_dev, "Unsupported Chip version %d\n",
+			CHELSIO_CHIP_VERSION(adap->params.chip));
+		return -EINVAL;
+	}
+	s->fl_starve_thres = 2*egress_threshold + 1;
+
+	t4_idma_monitor_init(adap, &s->idma_monitor);
+
+	/* Set up timers used for recuring callbacks to process RX and TX
+	 * administrative tasks.
+	 */
+	timer_setup(&s->rx_timer, sge_rx_timer_cb, 0);
+	timer_setup(&s->tx_timer, sge_tx_timer_cb, 0);
+
+	spin_lock_init(&s->intrq_lock);
+
+	return 0;
+}