diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/net/ethernet/davicom | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/davicom')
-rw-r--r-- | drivers/net/ethernet/davicom/Kconfig | 55 | ||||
-rw-r--r-- | drivers/net/ethernet/davicom/Makefile | 7 | ||||
-rw-r--r-- | drivers/net/ethernet/davicom/dm9000.c | 1812 | ||||
-rw-r--r-- | drivers/net/ethernet/davicom/dm9000.h | 181 | ||||
-rw-r--r-- | drivers/net/ethernet/davicom/dm9051.c | 1262 | ||||
-rw-r--r-- | drivers/net/ethernet/davicom/dm9051.h | 162 |
6 files changed, 3479 insertions, 0 deletions
diff --git a/drivers/net/ethernet/davicom/Kconfig b/drivers/net/ethernet/davicom/Kconfig new file mode 100644 index 000000000..02e0caff9 --- /dev/null +++ b/drivers/net/ethernet/davicom/Kconfig @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Davicom device configuration +# + +config NET_VENDOR_DAVICOM + bool "Davicom devices" + default y + help + If you have a network (Ethernet) card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Davicom devices. If you say Y, you will be asked + for your specific card in the following selections. + +if NET_VENDOR_DAVICOM + +config DM9000 + tristate "DM9000 support" + depends on ARM || MIPS || COLDFIRE || NIOS2 || COMPILE_TEST + select CRC32 + select MII + help + Support for DM9000 chipset. + + To compile this driver as a module, choose M here. The module + will be called dm9000. + +config DM9000_FORCE_SIMPLE_PHY_POLL + bool "Force simple NSR based PHY polling" + depends on DM9000 + help + This configuration forces the DM9000 to use the NSR's LinkStatus + bit to determine if the link is up or down instead of the more + costly MII PHY reads. Note, this will not work if the chip is + operating with an external PHY. + +config DM9051 + tristate "DM9051 SPI support" + depends on SPI + select CRC32 + select MDIO + select PHYLIB + select REGMAP_SPI + help + Support for DM9051 SPI chipset. + + To compile this driver as a module, choose M here. The module + will be called dm9051. + + The SPI mode for the host's SPI master to access DM9051 is mode + 0 on the SPI bus. + +endif # NET_VENDOR_DAVICOM diff --git a/drivers/net/ethernet/davicom/Makefile b/drivers/net/ethernet/davicom/Makefile new file mode 100644 index 000000000..225f85bc1 --- /dev/null +++ b/drivers/net/ethernet/davicom/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for the Davicom device drivers. +# + +obj-$(CONFIG_DM9000) += dm9000.o +obj-$(CONFIG_DM9051) += dm9051.o diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c new file mode 100644 index 000000000..b21e56de6 --- /dev/null +++ b/drivers/net/ethernet/davicom/dm9000.c @@ -0,0 +1,1812 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Davicom DM9000 Fast Ethernet driver for Linux. + * Copyright (C) 1997 Sten Wang + * + * (C) Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. + * + * Additional updates, Copyright: + * Ben Dooks <ben@simtec.co.uk> + * Sascha Hauer <s.hauer@pengutronix.de> + */ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/interrupt.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/ethtool.h> +#include <linux/dm9000.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/regulator/consumer.h> +#include <linux/gpio/consumer.h> + +#include <asm/delay.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include "dm9000.h" + +/* Board/System/Debug information/definition ---------------- */ + +#define DM9000_PHY 0x40 /* PHY address 0x01 */ + +#define CARDNAME "dm9000" + +/* + * Transmit timeout, default 5 seconds. + */ +static int watchdog = 5000; +module_param(watchdog, int, 0400); +MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); + +/* + * Debug messages level + */ +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "dm9000 debug level (0-6)"); + +/* DM9000 register address locking. + * + * The DM9000 uses an address register to control where data written + * to the data register goes. This means that the address register + * must be preserved over interrupts or similar calls. + * + * During interrupt and other critical calls, a spinlock is used to + * protect the system, but the calls themselves save the address + * in the address register in case they are interrupting another + * access to the device. + * + * For general accesses a lock is provided so that calls which are + * allowed to sleep are serialised so that the address register does + * not need to be saved. This lock also serves to serialise access + * to the EEPROM and PHY access registers which are shared between + * these two devices. + */ + +/* The driver supports the original DM9000E, and now the two newer + * devices, DM9000A and DM9000B. + */ + +enum dm9000_type { + TYPE_DM9000E, /* original DM9000 */ + TYPE_DM9000A, + TYPE_DM9000B +}; + +/* Structure/enum declaration ------------------------------- */ +struct board_info { + + void __iomem *io_addr; /* Register I/O base address */ + void __iomem *io_data; /* Data I/O address */ + u16 irq; /* IRQ */ + + u16 tx_pkt_cnt; + u16 queue_pkt_len; + u16 queue_start_addr; + u16 queue_ip_summed; + u16 dbug_cnt; + u8 io_mode; /* 0:word, 2:byte */ + u8 phy_addr; + u8 imr_all; + + unsigned int flags; + unsigned int in_timeout:1; + unsigned int in_suspend:1; + unsigned int wake_supported:1; + + enum dm9000_type type; + + void (*inblk)(void __iomem *port, void *data, int length); + void (*outblk)(void __iomem *port, void *data, int length); + void (*dumpblk)(void __iomem *port, int length); + + struct device *dev; /* parent device */ + + struct resource *addr_res; /* resources found */ + struct resource *data_res; + struct resource *addr_req; /* resources requested */ + struct resource *data_req; + + int irq_wake; + + struct mutex addr_lock; /* phy and eeprom access lock */ + + struct delayed_work phy_poll; + struct net_device *ndev; + + spinlock_t lock; + + struct mii_if_info mii; + u32 msg_enable; + u32 wake_state; + + int ip_summed; + + struct regulator *power_supply; +}; + +/* debug code */ + +#define dm9000_dbg(db, lev, msg...) do { \ + if ((lev) < debug) { \ + dev_dbg(db->dev, msg); \ + } \ +} while (0) + +static inline struct board_info *to_dm9000_board(struct net_device *dev) +{ + return netdev_priv(dev); +} + +/* DM9000 network board routine ---------------------------- */ + +/* + * Read a byte from I/O port + */ +static u8 +ior(struct board_info *db, int reg) +{ + writeb(reg, db->io_addr); + return readb(db->io_data); +} + +/* + * Write a byte to I/O port + */ + +static void +iow(struct board_info *db, int reg, int value) +{ + writeb(reg, db->io_addr); + writeb(value, db->io_data); +} + +static void +dm9000_reset(struct board_info *db) +{ + dev_dbg(db->dev, "resetting device\n"); + + /* Reset DM9000, see DM9000 Application Notes V1.22 Jun 11, 2004 page 29 + * The essential point is that we have to do a double reset, and the + * instruction is to set LBK into MAC internal loopback mode. + */ + iow(db, DM9000_NCR, NCR_RST | NCR_MAC_LBK); + udelay(100); /* Application note says at least 20 us */ + if (ior(db, DM9000_NCR) & 1) + dev_err(db->dev, "dm9000 did not respond to first reset\n"); + + iow(db, DM9000_NCR, 0); + iow(db, DM9000_NCR, NCR_RST | NCR_MAC_LBK); + udelay(100); + if (ior(db, DM9000_NCR) & 1) + dev_err(db->dev, "dm9000 did not respond to second reset\n"); +} + +/* routines for sending block to chip */ + +static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count) +{ + iowrite8_rep(reg, data, count); +} + +static void dm9000_outblk_16bit(void __iomem *reg, void *data, int count) +{ + iowrite16_rep(reg, data, (count+1) >> 1); +} + +static void dm9000_outblk_32bit(void __iomem *reg, void *data, int count) +{ + iowrite32_rep(reg, data, (count+3) >> 2); +} + +/* input block from chip to memory */ + +static void dm9000_inblk_8bit(void __iomem *reg, void *data, int count) +{ + ioread8_rep(reg, data, count); +} + + +static void dm9000_inblk_16bit(void __iomem *reg, void *data, int count) +{ + ioread16_rep(reg, data, (count+1) >> 1); +} + +static void dm9000_inblk_32bit(void __iomem *reg, void *data, int count) +{ + ioread32_rep(reg, data, (count+3) >> 2); +} + +/* dump block from chip to null */ + +static void dm9000_dumpblk_8bit(void __iomem *reg, int count) +{ + int i; + + for (i = 0; i < count; i++) + readb(reg); +} + +static void dm9000_dumpblk_16bit(void __iomem *reg, int count) +{ + int i; + + count = (count + 1) >> 1; + + for (i = 0; i < count; i++) + readw(reg); +} + +static void dm9000_dumpblk_32bit(void __iomem *reg, int count) +{ + int i; + + count = (count + 3) >> 2; + + for (i = 0; i < count; i++) + readl(reg); +} + +/* + * Sleep, either by using msleep() or if we are suspending, then + * use mdelay() to sleep. + */ +static void dm9000_msleep(struct board_info *db, unsigned int ms) +{ + if (db->in_suspend || db->in_timeout) + mdelay(ms); + else + msleep(ms); +} + +/* Read a word from phyxcer */ +static int +dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) +{ + struct board_info *db = netdev_priv(dev); + unsigned long flags; + unsigned int reg_save; + int ret; + + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Issue phyxcer read command */ + iow(db, DM9000_EPCR, EPCR_ERPRR | EPCR_EPOS); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait read complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ + + /* The read data keeps on REG_0D & REG_0E */ + ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + mutex_unlock(&db->addr_lock); + + dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret); + return ret; +} + +/* Write a word to phyxcer */ +static void +dm9000_phy_write(struct net_device *dev, + int phyaddr_unused, int reg, int value) +{ + struct board_info *db = netdev_priv(dev); + unsigned long flags; + unsigned long reg_save; + + dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value); + if (!db->in_timeout) + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Fill the written data into REG_0D & REG_0E */ + iow(db, DM9000_EPDRL, value); + iow(db, DM9000_EPDRH, value >> 8); + + /* Issue phyxcer write command */ + iow(db, DM9000_EPCR, EPCR_EPOS | EPCR_ERPRW); + + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_msleep(db, 1); /* Wait write complete */ + + spin_lock_irqsave(&db->lock, flags); + reg_save = readb(db->io_addr); + + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ + + /* restore the previous address */ + writeb(reg_save, db->io_addr); + + spin_unlock_irqrestore(&db->lock, flags); + if (!db->in_timeout) + mutex_unlock(&db->addr_lock); +} + +/* dm9000_set_io + * + * select the specified set of io routines to use with the + * device + */ + +static void dm9000_set_io(struct board_info *db, int byte_width) +{ + /* use the size of the data resource to work out what IO + * routines we want to use + */ + + switch (byte_width) { + case 1: + db->dumpblk = dm9000_dumpblk_8bit; + db->outblk = dm9000_outblk_8bit; + db->inblk = dm9000_inblk_8bit; + break; + + + case 3: + dev_dbg(db->dev, ": 3 byte IO, falling back to 16bit\n"); + fallthrough; + case 2: + db->dumpblk = dm9000_dumpblk_16bit; + db->outblk = dm9000_outblk_16bit; + db->inblk = dm9000_inblk_16bit; + break; + + case 4: + default: + db->dumpblk = dm9000_dumpblk_32bit; + db->outblk = dm9000_outblk_32bit; + db->inblk = dm9000_inblk_32bit; + break; + } +} + +static void dm9000_schedule_poll(struct board_info *db) +{ + if (db->type == TYPE_DM9000E) + schedule_delayed_work(&db->phy_poll, HZ * 2); +} + +static int dm9000_ioctl(struct net_device *dev, struct ifreq *req, int cmd) +{ + struct board_info *dm = to_dm9000_board(dev); + + if (!netif_running(dev)) + return -EINVAL; + + return generic_mii_ioctl(&dm->mii, if_mii(req), cmd, NULL); +} + +static unsigned int +dm9000_read_locked(struct board_info *db, int reg) +{ + unsigned long flags; + unsigned int ret; + + spin_lock_irqsave(&db->lock, flags); + ret = ior(db, reg); + spin_unlock_irqrestore(&db->lock, flags); + + return ret; +} + +static int dm9000_wait_eeprom(struct board_info *db) +{ + unsigned int status; + int timeout = 8; /* wait max 8msec */ + + /* The DM9000 data sheets say we should be able to + * poll the ERRE bit in EPCR to wait for the EEPROM + * operation. From testing several chips, this bit + * does not seem to work. + * + * We attempt to use the bit, but fall back to the + * timeout (which is why we do not return an error + * on expiry) to say that the EEPROM operation has + * completed. + */ + + while (1) { + status = dm9000_read_locked(db, DM9000_EPCR); + + if ((status & EPCR_ERRE) == 0) + break; + + msleep(1); + + if (timeout-- < 0) { + dev_dbg(db->dev, "timeout waiting EEPROM\n"); + break; + } + } + + return 0; +} + +/* + * Read a word data from EEPROM + */ +static void +dm9000_read_eeprom(struct board_info *db, int offset, u8 *to) +{ + unsigned long flags; + + if (db->flags & DM9000_PLATF_NO_EEPROM) { + to[0] = 0xff; + to[1] = 0xff; + return; + } + + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + + iow(db, DM9000_EPAR, offset); + iow(db, DM9000_EPCR, EPCR_ERPRR); + + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_wait_eeprom(db); + + /* delay for at-least 150uS */ + msleep(1); + + spin_lock_irqsave(&db->lock, flags); + + iow(db, DM9000_EPCR, 0x0); + + to[0] = ior(db, DM9000_EPDRL); + to[1] = ior(db, DM9000_EPDRH); + + spin_unlock_irqrestore(&db->lock, flags); + + mutex_unlock(&db->addr_lock); +} + +/* + * Write a word data to SROM + */ +static void +dm9000_write_eeprom(struct board_info *db, int offset, u8 *data) +{ + unsigned long flags; + + if (db->flags & DM9000_PLATF_NO_EEPROM) + return; + + mutex_lock(&db->addr_lock); + + spin_lock_irqsave(&db->lock, flags); + iow(db, DM9000_EPAR, offset); + iow(db, DM9000_EPDRH, data[1]); + iow(db, DM9000_EPDRL, data[0]); + iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW); + spin_unlock_irqrestore(&db->lock, flags); + + dm9000_wait_eeprom(db); + + mdelay(1); /* wait at least 150uS to clear */ + + spin_lock_irqsave(&db->lock, flags); + iow(db, DM9000_EPCR, 0); + spin_unlock_irqrestore(&db->lock, flags); + + mutex_unlock(&db->addr_lock); +} + +/* ethtool ops */ + +static void dm9000_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct board_info *dm = to_dm9000_board(dev); + + strscpy(info->driver, CARDNAME, sizeof(info->driver)); + strscpy(info->bus_info, to_platform_device(dm->dev)->name, + sizeof(info->bus_info)); +} + +static u32 dm9000_get_msglevel(struct net_device *dev) +{ + struct board_info *dm = to_dm9000_board(dev); + + return dm->msg_enable; +} + +static void dm9000_set_msglevel(struct net_device *dev, u32 value) +{ + struct board_info *dm = to_dm9000_board(dev); + + dm->msg_enable = value; +} + +static int dm9000_get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *cmd) +{ + struct board_info *dm = to_dm9000_board(dev); + + mii_ethtool_get_link_ksettings(&dm->mii, cmd); + return 0; +} + +static int dm9000_set_link_ksettings(struct net_device *dev, + const struct ethtool_link_ksettings *cmd) +{ + struct board_info *dm = to_dm9000_board(dev); + + return mii_ethtool_set_link_ksettings(&dm->mii, cmd); +} + +static int dm9000_nway_reset(struct net_device *dev) +{ + struct board_info *dm = to_dm9000_board(dev); + return mii_nway_restart(&dm->mii); +} + +static int dm9000_set_features(struct net_device *dev, + netdev_features_t features) +{ + struct board_info *dm = to_dm9000_board(dev); + netdev_features_t changed = dev->features ^ features; + unsigned long flags; + + if (!(changed & NETIF_F_RXCSUM)) + return 0; + + spin_lock_irqsave(&dm->lock, flags); + iow(dm, DM9000_RCSR, (features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0); + spin_unlock_irqrestore(&dm->lock, flags); + + return 0; +} + +static u32 dm9000_get_link(struct net_device *dev) +{ + struct board_info *dm = to_dm9000_board(dev); + u32 ret; + + if (dm->flags & DM9000_PLATF_EXT_PHY) + ret = mii_link_ok(&dm->mii); + else + ret = dm9000_read_locked(dm, DM9000_NSR) & NSR_LINKST ? 1 : 0; + + return ret; +} + +#define DM_EEPROM_MAGIC (0x444D394B) + +static int dm9000_get_eeprom_len(struct net_device *dev) +{ + return 128; +} + +static int dm9000_get_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, u8 *data) +{ + struct board_info *dm = to_dm9000_board(dev); + int offset = ee->offset; + int len = ee->len; + int i; + + /* EEPROM access is aligned to two bytes */ + + if ((len & 1) != 0 || (offset & 1) != 0) + return -EINVAL; + + if (dm->flags & DM9000_PLATF_NO_EEPROM) + return -ENOENT; + + ee->magic = DM_EEPROM_MAGIC; + + for (i = 0; i < len; i += 2) + dm9000_read_eeprom(dm, (offset + i) / 2, data + i); + + return 0; +} + +static int dm9000_set_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, u8 *data) +{ + struct board_info *dm = to_dm9000_board(dev); + int offset = ee->offset; + int len = ee->len; + int done; + + /* EEPROM access is aligned to two bytes */ + + if (dm->flags & DM9000_PLATF_NO_EEPROM) + return -ENOENT; + + if (ee->magic != DM_EEPROM_MAGIC) + return -EINVAL; + + while (len > 0) { + if (len & 1 || offset & 1) { + int which = offset & 1; + u8 tmp[2]; + + dm9000_read_eeprom(dm, offset / 2, tmp); + tmp[which] = *data; + dm9000_write_eeprom(dm, offset / 2, tmp); + + done = 1; + } else { + dm9000_write_eeprom(dm, offset / 2, data); + done = 2; + } + + data += done; + offset += done; + len -= done; + } + + return 0; +} + +static void dm9000_get_wol(struct net_device *dev, struct ethtool_wolinfo *w) +{ + struct board_info *dm = to_dm9000_board(dev); + + memset(w, 0, sizeof(struct ethtool_wolinfo)); + + /* note, we could probably support wake-phy too */ + w->supported = dm->wake_supported ? WAKE_MAGIC : 0; + w->wolopts = dm->wake_state; +} + +static int dm9000_set_wol(struct net_device *dev, struct ethtool_wolinfo *w) +{ + struct board_info *dm = to_dm9000_board(dev); + unsigned long flags; + u32 opts = w->wolopts; + u32 wcr = 0; + + if (!dm->wake_supported) + return -EOPNOTSUPP; + + if (opts & ~WAKE_MAGIC) + return -EINVAL; + + if (opts & WAKE_MAGIC) + wcr |= WCR_MAGICEN; + + mutex_lock(&dm->addr_lock); + + spin_lock_irqsave(&dm->lock, flags); + iow(dm, DM9000_WCR, wcr); + spin_unlock_irqrestore(&dm->lock, flags); + + mutex_unlock(&dm->addr_lock); + + if (dm->wake_state != opts) { + /* change in wol state, update IRQ state */ + + if (!dm->wake_state) + irq_set_irq_wake(dm->irq_wake, 1); + else if (dm->wake_state && !opts) + irq_set_irq_wake(dm->irq_wake, 0); + } + + dm->wake_state = opts; + return 0; +} + +static const struct ethtool_ops dm9000_ethtool_ops = { + .get_drvinfo = dm9000_get_drvinfo, + .get_msglevel = dm9000_get_msglevel, + .set_msglevel = dm9000_set_msglevel, + .nway_reset = dm9000_nway_reset, + .get_link = dm9000_get_link, + .get_wol = dm9000_get_wol, + .set_wol = dm9000_set_wol, + .get_eeprom_len = dm9000_get_eeprom_len, + .get_eeprom = dm9000_get_eeprom, + .set_eeprom = dm9000_set_eeprom, + .get_link_ksettings = dm9000_get_link_ksettings, + .set_link_ksettings = dm9000_set_link_ksettings, +}; + +static void dm9000_show_carrier(struct board_info *db, + unsigned carrier, unsigned nsr) +{ + int lpa; + struct net_device *ndev = db->ndev; + struct mii_if_info *mii = &db->mii; + unsigned ncr = dm9000_read_locked(db, DM9000_NCR); + + if (carrier) { + lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA); + dev_info(db->dev, + "%s: link up, %dMbps, %s-duplex, lpa 0x%04X\n", + ndev->name, (nsr & NSR_SPEED) ? 10 : 100, + (ncr & NCR_FDX) ? "full" : "half", lpa); + } else { + dev_info(db->dev, "%s: link down\n", ndev->name); + } +} + +static void +dm9000_poll_work(struct work_struct *w) +{ + struct delayed_work *dw = to_delayed_work(w); + struct board_info *db = container_of(dw, struct board_info, phy_poll); + struct net_device *ndev = db->ndev; + + if (db->flags & DM9000_PLATF_SIMPLE_PHY && + !(db->flags & DM9000_PLATF_EXT_PHY)) { + unsigned nsr = dm9000_read_locked(db, DM9000_NSR); + unsigned old_carrier = netif_carrier_ok(ndev) ? 1 : 0; + unsigned new_carrier; + + new_carrier = (nsr & NSR_LINKST) ? 1 : 0; + + if (old_carrier != new_carrier) { + if (netif_msg_link(db)) + dm9000_show_carrier(db, new_carrier, nsr); + + if (!new_carrier) + netif_carrier_off(ndev); + else + netif_carrier_on(ndev); + } + } else + mii_check_media(&db->mii, netif_msg_link(db), 0); + + if (netif_running(ndev)) + dm9000_schedule_poll(db); +} + +/* dm9000_release_board + * + * release a board, and any mapped resources + */ + +static void +dm9000_release_board(struct platform_device *pdev, struct board_info *db) +{ + /* unmap our resources */ + + iounmap(db->io_addr); + iounmap(db->io_data); + + /* release the resources */ + + if (db->data_req) + release_resource(db->data_req); + kfree(db->data_req); + + if (db->addr_req) + release_resource(db->addr_req); + kfree(db->addr_req); +} + +static unsigned char dm9000_type_to_char(enum dm9000_type type) +{ + switch (type) { + case TYPE_DM9000E: return 'e'; + case TYPE_DM9000A: return 'a'; + case TYPE_DM9000B: return 'b'; + } + + return '?'; +} + +/* + * Set DM9000 multicast address + */ +static void +dm9000_hash_table_unlocked(struct net_device *dev) +{ + struct board_info *db = netdev_priv(dev); + struct netdev_hw_addr *ha; + int i, oft; + u32 hash_val; + u16 hash_table[4] = { 0, 0, 0, 0x8000 }; /* broadcast address */ + u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN; + + dm9000_dbg(db, 1, "entering %s\n", __func__); + + for (i = 0, oft = DM9000_PAR; i < 6; i++, oft++) + iow(db, oft, dev->dev_addr[i]); + + if (dev->flags & IFF_PROMISC) + rcr |= RCR_PRMSC; + + if (dev->flags & IFF_ALLMULTI) + rcr |= RCR_ALL; + + /* the multicast address in Hash Table : 64 bits */ + netdev_for_each_mc_addr(ha, dev) { + hash_val = ether_crc_le(6, ha->addr) & 0x3f; + hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); + } + + /* Write the hash table to MAC MD table */ + for (i = 0, oft = DM9000_MAR; i < 4; i++) { + iow(db, oft++, hash_table[i]); + iow(db, oft++, hash_table[i] >> 8); + } + + iow(db, DM9000_RCR, rcr); +} + +static void +dm9000_hash_table(struct net_device *dev) +{ + struct board_info *db = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&db->lock, flags); + dm9000_hash_table_unlocked(dev); + spin_unlock_irqrestore(&db->lock, flags); +} + +static void +dm9000_mask_interrupts(struct board_info *db) +{ + iow(db, DM9000_IMR, IMR_PAR); +} + +static void +dm9000_unmask_interrupts(struct board_info *db) +{ + iow(db, DM9000_IMR, db->imr_all); +} + +/* + * Initialize dm9000 board + */ +static void +dm9000_init_dm9000(struct net_device *dev) +{ + struct board_info *db = netdev_priv(dev); + unsigned int imr; + unsigned int ncr; + + dm9000_dbg(db, 1, "entering %s\n", __func__); + + dm9000_reset(db); + dm9000_mask_interrupts(db); + + /* I/O mode */ + db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */ + + /* Checksum mode */ + if (dev->hw_features & NETIF_F_RXCSUM) + iow(db, DM9000_RCSR, + (dev->features & NETIF_F_RXCSUM) ? RCSR_CSUM : 0); + + iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + iow(db, DM9000_GPR, 0); + + /* If we are dealing with DM9000B, some extra steps are required: a + * manual phy reset, and setting init params. + */ + if (db->type == TYPE_DM9000B) { + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); + dm9000_phy_write(dev, 0, MII_DM_DSPCR, DSPCR_INIT_PARAM); + } + + ncr = (db->flags & DM9000_PLATF_EXT_PHY) ? NCR_EXT_PHY : 0; + + /* if wol is needed, then always set NCR_WAKEEN otherwise we end + * up dumping the wake events if we disable this. There is already + * a wake-mask in DM9000_WCR */ + if (db->wake_supported) + ncr |= NCR_WAKEEN; + + iow(db, DM9000_NCR, ncr); + + /* Program operating register */ + iow(db, DM9000_TCR, 0); /* TX Polling clear */ + iow(db, DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */ + iow(db, DM9000_FCR, 0xff); /* Flow Control */ + iow(db, DM9000_SMCR, 0); /* Special Mode */ + /* clear TX status */ + iow(db, DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END); + iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */ + + /* Set address filter table */ + dm9000_hash_table_unlocked(dev); + + imr = IMR_PAR | IMR_PTM | IMR_PRM; + if (db->type != TYPE_DM9000E) + imr |= IMR_LNKCHNG; + + db->imr_all = imr; + + /* Init Driver variable */ + db->tx_pkt_cnt = 0; + db->queue_pkt_len = 0; + netif_trans_update(dev); +} + +/* Our watchdog timed out. Called by the networking layer */ +static void dm9000_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct board_info *db = netdev_priv(dev); + u8 reg_save; + unsigned long flags; + + /* Save previous register address */ + spin_lock_irqsave(&db->lock, flags); + db->in_timeout = 1; + reg_save = readb(db->io_addr); + + netif_stop_queue(dev); + dm9000_init_dm9000(dev); + dm9000_unmask_interrupts(db); + /* We can accept TX packets again */ + netif_trans_update(dev); /* prevent tx timeout */ + netif_wake_queue(dev); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + db->in_timeout = 0; + spin_unlock_irqrestore(&db->lock, flags); +} + +static void dm9000_send_packet(struct net_device *dev, + int ip_summed, + u16 pkt_len) +{ + struct board_info *dm = to_dm9000_board(dev); + + /* The DM9000 is not smart enough to leave fragmented packets alone. */ + if (dm->ip_summed != ip_summed) { + if (ip_summed == CHECKSUM_NONE) + iow(dm, DM9000_TCCR, 0); + else + iow(dm, DM9000_TCCR, TCCR_IP | TCCR_UDP | TCCR_TCP); + dm->ip_summed = ip_summed; + } + + /* Set TX length to DM9000 */ + iow(dm, DM9000_TXPLL, pkt_len); + iow(dm, DM9000_TXPLH, pkt_len >> 8); + + /* Issue TX polling command */ + iow(dm, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */ +} + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ +static netdev_tx_t +dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + struct board_info *db = netdev_priv(dev); + + dm9000_dbg(db, 3, "%s:\n", __func__); + + if (db->tx_pkt_cnt > 1) + return NETDEV_TX_BUSY; + + spin_lock_irqsave(&db->lock, flags); + + /* Move data to DM9000 TX RAM */ + writeb(DM9000_MWCMD, db->io_addr); + + (db->outblk)(db->io_data, skb->data, skb->len); + dev->stats.tx_bytes += skb->len; + + db->tx_pkt_cnt++; + /* TX control: First packet immediately send, second packet queue */ + if (db->tx_pkt_cnt == 1) { + dm9000_send_packet(dev, skb->ip_summed, skb->len); + } else { + /* Second packet */ + db->queue_pkt_len = skb->len; + db->queue_ip_summed = skb->ip_summed; + netif_stop_queue(dev); + } + + spin_unlock_irqrestore(&db->lock, flags); + + /* free this SKB */ + dev_consume_skb_any(skb); + + return NETDEV_TX_OK; +} + +/* + * DM9000 interrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +static void dm9000_tx_done(struct net_device *dev, struct board_info *db) +{ + int tx_status = ior(db, DM9000_NSR); /* Got TX status */ + + if (tx_status & (NSR_TX2END | NSR_TX1END)) { + /* One packet sent complete */ + db->tx_pkt_cnt--; + dev->stats.tx_packets++; + + if (netif_msg_tx_done(db)) + dev_dbg(db->dev, "tx done, NSR %02x\n", tx_status); + + /* Queue packet check & send */ + if (db->tx_pkt_cnt > 0) + dm9000_send_packet(dev, db->queue_ip_summed, + db->queue_pkt_len); + netif_wake_queue(dev); + } +} + +struct dm9000_rxhdr { + u8 RxPktReady; + u8 RxStatus; + __le16 RxLen; +} __packed; + +/* + * Received a packet and pass to upper layer + */ +static void +dm9000_rx(struct net_device *dev) +{ + struct board_info *db = netdev_priv(dev); + struct dm9000_rxhdr rxhdr; + struct sk_buff *skb; + u8 rxbyte, *rdptr; + bool GoodPacket; + int RxLen; + + /* Check packet ready or not */ + do { + ior(db, DM9000_MRCMDX); /* Dummy read */ + + /* Get most updated data */ + rxbyte = readb(db->io_data); + + /* Status check: this byte must be 0 or 1 */ + if (rxbyte & DM9000_PKT_ERR) { + dev_warn(db->dev, "status check fail: %d\n", rxbyte); + iow(db, DM9000_RCR, 0x00); /* Stop Device */ + return; + } + + if (!(rxbyte & DM9000_PKT_RDY)) + return; + + /* A packet ready now & Get status/length */ + GoodPacket = true; + writeb(DM9000_MRCMD, db->io_addr); + + (db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr)); + + RxLen = le16_to_cpu(rxhdr.RxLen); + + if (netif_msg_rx_status(db)) + dev_dbg(db->dev, "RX: status %02x, length %04x\n", + rxhdr.RxStatus, RxLen); + + /* Packet Status check */ + if (RxLen < 0x40) { + GoodPacket = false; + if (netif_msg_rx_err(db)) + dev_dbg(db->dev, "RX: Bad Packet (runt)\n"); + } + + if (RxLen > DM9000_PKT_MAX) { + dev_dbg(db->dev, "RST: RX Len:%x\n", RxLen); + } + + /* rxhdr.RxStatus is identical to RSR register. */ + if (rxhdr.RxStatus & (RSR_FOE | RSR_CE | RSR_AE | + RSR_PLE | RSR_RWTO | + RSR_LCS | RSR_RF)) { + GoodPacket = false; + if (rxhdr.RxStatus & RSR_FOE) { + if (netif_msg_rx_err(db)) + dev_dbg(db->dev, "fifo error\n"); + dev->stats.rx_fifo_errors++; + } + if (rxhdr.RxStatus & RSR_CE) { + if (netif_msg_rx_err(db)) + dev_dbg(db->dev, "crc error\n"); + dev->stats.rx_crc_errors++; + } + if (rxhdr.RxStatus & RSR_RF) { + if (netif_msg_rx_err(db)) + dev_dbg(db->dev, "length error\n"); + dev->stats.rx_length_errors++; + } + } + + /* Move data from DM9000 */ + if (GoodPacket && + ((skb = netdev_alloc_skb(dev, RxLen + 4)) != NULL)) { + skb_reserve(skb, 2); + rdptr = skb_put(skb, RxLen - 4); + + /* Read received packet from RX SRAM */ + + (db->inblk)(db->io_data, rdptr, RxLen); + dev->stats.rx_bytes += RxLen; + + /* Pass to upper layer */ + skb->protocol = eth_type_trans(skb, dev); + if (dev->features & NETIF_F_RXCSUM) { + if ((((rxbyte & 0x1c) << 3) & rxbyte) == 0) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else + skb_checksum_none_assert(skb); + } + netif_rx(skb); + dev->stats.rx_packets++; + + } else { + /* need to dump the packet's data */ + + (db->dumpblk)(db->io_data, RxLen); + } + } while (rxbyte & DM9000_PKT_RDY); +} + +static irqreturn_t dm9000_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct board_info *db = netdev_priv(dev); + int int_status; + unsigned long flags; + u8 reg_save; + + dm9000_dbg(db, 3, "entering %s\n", __func__); + + /* A real interrupt coming */ + + /* holders of db->lock must always block IRQs */ + spin_lock_irqsave(&db->lock, flags); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + dm9000_mask_interrupts(db); + /* Got DM9000 interrupt status */ + int_status = ior(db, DM9000_ISR); /* Got ISR */ + iow(db, DM9000_ISR, int_status); /* Clear ISR status */ + + if (netif_msg_intr(db)) + dev_dbg(db->dev, "interrupt status %02x\n", int_status); + + /* Received the coming packet */ + if (int_status & ISR_PRS) + dm9000_rx(dev); + + /* Transmit Interrupt check */ + if (int_status & ISR_PTS) + dm9000_tx_done(dev, db); + + if (db->type != TYPE_DM9000E) { + if (int_status & ISR_LNKCHNG) { + /* fire a link-change request */ + schedule_delayed_work(&db->phy_poll, 1); + } + } + + dm9000_unmask_interrupts(db); + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + + spin_unlock_irqrestore(&db->lock, flags); + + return IRQ_HANDLED; +} + +static irqreturn_t dm9000_wol_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct board_info *db = netdev_priv(dev); + unsigned long flags; + unsigned nsr, wcr; + + spin_lock_irqsave(&db->lock, flags); + + nsr = ior(db, DM9000_NSR); + wcr = ior(db, DM9000_WCR); + + dev_dbg(db->dev, "%s: NSR=0x%02x, WCR=0x%02x\n", __func__, nsr, wcr); + + if (nsr & NSR_WAKEST) { + /* clear, so we can avoid */ + iow(db, DM9000_NSR, NSR_WAKEST); + + if (wcr & WCR_LINKST) + dev_info(db->dev, "wake by link status change\n"); + if (wcr & WCR_SAMPLEST) + dev_info(db->dev, "wake by sample packet\n"); + if (wcr & WCR_MAGICST) + dev_info(db->dev, "wake by magic packet\n"); + if (!(wcr & (WCR_LINKST | WCR_SAMPLEST | WCR_MAGICST))) + dev_err(db->dev, "wake signalled with no reason? " + "NSR=0x%02x, WSR=0x%02x\n", nsr, wcr); + } + + spin_unlock_irqrestore(&db->lock, flags); + + return (nsr & NSR_WAKEST) ? IRQ_HANDLED : IRQ_NONE; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + *Used by netconsole + */ +static void dm9000_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + dm9000_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" actives it. + */ +static int +dm9000_open(struct net_device *dev) +{ + struct board_info *db = netdev_priv(dev); + unsigned int irq_flags = irq_get_trigger_type(dev->irq); + + if (netif_msg_ifup(db)) + dev_dbg(db->dev, "enabling %s\n", dev->name); + + /* If there is no IRQ type specified, tell the user that this is a + * problem + */ + if (irq_flags == IRQF_TRIGGER_NONE) + dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n"); + + irq_flags |= IRQF_SHARED; + + /* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */ + iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ + mdelay(1); /* delay needs by DM9000B */ + + /* Initialize DM9000 board */ + dm9000_init_dm9000(dev); + + if (request_irq(dev->irq, dm9000_interrupt, irq_flags, dev->name, dev)) + return -EAGAIN; + /* Now that we have an interrupt handler hooked up we can unmask + * our interrupts + */ + dm9000_unmask_interrupts(db); + + /* Init driver variable */ + db->dbug_cnt = 0; + + mii_check_media(&db->mii, netif_msg_link(db), 1); + netif_start_queue(dev); + + /* Poll initial link status */ + schedule_delayed_work(&db->phy_poll, 1); + + return 0; +} + +static void +dm9000_shutdown(struct net_device *dev) +{ + struct board_info *db = netdev_priv(dev); + + /* RESET device */ + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ + iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */ + dm9000_mask_interrupts(db); + iow(db, DM9000_RCR, 0x00); /* Disable RX */ +} + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ +static int +dm9000_stop(struct net_device *ndev) +{ + struct board_info *db = netdev_priv(ndev); + + if (netif_msg_ifdown(db)) + dev_dbg(db->dev, "shutting down %s\n", ndev->name); + + cancel_delayed_work_sync(&db->phy_poll); + + netif_stop_queue(ndev); + netif_carrier_off(ndev); + + /* free interrupt */ + free_irq(ndev->irq, ndev); + + dm9000_shutdown(ndev); + + return 0; +} + +static const struct net_device_ops dm9000_netdev_ops = { + .ndo_open = dm9000_open, + .ndo_stop = dm9000_stop, + .ndo_start_xmit = dm9000_start_xmit, + .ndo_tx_timeout = dm9000_timeout, + .ndo_set_rx_mode = dm9000_hash_table, + .ndo_eth_ioctl = dm9000_ioctl, + .ndo_set_features = dm9000_set_features, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = dm9000_poll_controller, +#endif +}; + +static struct dm9000_plat_data *dm9000_parse_dt(struct device *dev) +{ + struct dm9000_plat_data *pdata; + struct device_node *np = dev->of_node; + int ret; + + if (!IS_ENABLED(CONFIG_OF) || !np) + return ERR_PTR(-ENXIO); + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + if (of_find_property(np, "davicom,ext-phy", NULL)) + pdata->flags |= DM9000_PLATF_EXT_PHY; + if (of_find_property(np, "davicom,no-eeprom", NULL)) + pdata->flags |= DM9000_PLATF_NO_EEPROM; + + ret = of_get_mac_address(np, pdata->dev_addr); + if (ret == -EPROBE_DEFER) + return ERR_PTR(ret); + + return pdata; +} + +/* + * Search DM9000 board, allocate space and register it + */ +static int +dm9000_probe(struct platform_device *pdev) +{ + struct dm9000_plat_data *pdata = dev_get_platdata(&pdev->dev); + struct board_info *db; /* Point a board information structure */ + struct net_device *ndev; + struct device *dev = &pdev->dev; + const unsigned char *mac_src; + int ret = 0; + int iosize; + int i; + u32 id_val; + struct gpio_desc *reset_gpio; + struct regulator *power; + bool inv_mac_addr = false; + u8 addr[ETH_ALEN]; + + power = devm_regulator_get(dev, "vcc"); + if (IS_ERR(power)) { + if (PTR_ERR(power) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_dbg(dev, "no regulator provided\n"); + } else { + ret = regulator_enable(power); + if (ret != 0) { + dev_err(dev, + "Failed to enable power regulator: %d\n", ret); + return ret; + } + dev_dbg(dev, "regulator enabled\n"); + } + + reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + ret = PTR_ERR_OR_ZERO(reset_gpio); + if (ret) { + dev_err(dev, "failed to request reset gpio: %d\n", ret); + goto out_regulator_disable; + } + + if (reset_gpio) { + ret = gpiod_set_consumer_name(reset_gpio, "dm9000_reset"); + if (ret) { + dev_err(dev, "failed to set reset gpio name: %d\n", + ret); + goto out_regulator_disable; + } + + /* According to manual PWRST# Low Period Min 1ms */ + msleep(2); + gpiod_set_value_cansleep(reset_gpio, 0); + /* Needs 3ms to read eeprom when PWRST is deasserted */ + msleep(4); + } + + if (!pdata) { + pdata = dm9000_parse_dt(&pdev->dev); + if (IS_ERR(pdata)) { + ret = PTR_ERR(pdata); + goto out_regulator_disable; + } + } + + /* Init network device */ + ndev = alloc_etherdev(sizeof(struct board_info)); + if (!ndev) { + ret = -ENOMEM; + goto out_regulator_disable; + } + + SET_NETDEV_DEV(ndev, &pdev->dev); + + dev_dbg(&pdev->dev, "dm9000_probe()\n"); + + /* setup board info structure */ + db = netdev_priv(ndev); + + db->dev = &pdev->dev; + db->ndev = ndev; + if (!IS_ERR(power)) + db->power_supply = power; + + spin_lock_init(&db->lock); + mutex_init(&db->addr_lock); + + INIT_DELAYED_WORK(&db->phy_poll, dm9000_poll_work); + + db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + + if (!db->addr_res || !db->data_res) { + dev_err(db->dev, "insufficient resources addr=%p data=%p\n", + db->addr_res, db->data_res); + ret = -ENOENT; + goto out; + } + + ndev->irq = platform_get_irq(pdev, 0); + if (ndev->irq < 0) { + ret = ndev->irq; + goto out; + } + + db->irq_wake = platform_get_irq_optional(pdev, 1); + if (db->irq_wake >= 0) { + dev_dbg(db->dev, "wakeup irq %d\n", db->irq_wake); + + ret = request_irq(db->irq_wake, dm9000_wol_interrupt, + IRQF_SHARED, dev_name(db->dev), ndev); + if (ret) { + dev_err(db->dev, "cannot get wakeup irq (%d)\n", ret); + } else { + + /* test to see if irq is really wakeup capable */ + ret = irq_set_irq_wake(db->irq_wake, 1); + if (ret) { + dev_err(db->dev, "irq %d cannot set wakeup (%d)\n", + db->irq_wake, ret); + } else { + irq_set_irq_wake(db->irq_wake, 0); + db->wake_supported = 1; + } + } + } + + iosize = resource_size(db->addr_res); + db->addr_req = request_mem_region(db->addr_res->start, iosize, + pdev->name); + + if (db->addr_req == NULL) { + dev_err(db->dev, "cannot claim address reg area\n"); + ret = -EIO; + goto out; + } + + db->io_addr = ioremap(db->addr_res->start, iosize); + + if (db->io_addr == NULL) { + dev_err(db->dev, "failed to ioremap address reg\n"); + ret = -EINVAL; + goto out; + } + + iosize = resource_size(db->data_res); + db->data_req = request_mem_region(db->data_res->start, iosize, + pdev->name); + + if (db->data_req == NULL) { + dev_err(db->dev, "cannot claim data reg area\n"); + ret = -EIO; + goto out; + } + + db->io_data = ioremap(db->data_res->start, iosize); + + if (db->io_data == NULL) { + dev_err(db->dev, "failed to ioremap data reg\n"); + ret = -EINVAL; + goto out; + } + + /* fill in parameters for net-dev structure */ + ndev->base_addr = (unsigned long)db->io_addr; + + /* ensure at least we have a default set of IO routines */ + dm9000_set_io(db, iosize); + + /* check to see if anything is being over-ridden */ + if (pdata != NULL) { + /* check to see if the driver wants to over-ride the + * default IO width */ + + if (pdata->flags & DM9000_PLATF_8BITONLY) + dm9000_set_io(db, 1); + + if (pdata->flags & DM9000_PLATF_16BITONLY) + dm9000_set_io(db, 2); + + if (pdata->flags & DM9000_PLATF_32BITONLY) + dm9000_set_io(db, 4); + + /* check to see if there are any IO routine + * over-rides */ + + if (pdata->inblk != NULL) + db->inblk = pdata->inblk; + + if (pdata->outblk != NULL) + db->outblk = pdata->outblk; + + if (pdata->dumpblk != NULL) + db->dumpblk = pdata->dumpblk; + + db->flags = pdata->flags; + } + +#ifdef CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL + db->flags |= DM9000_PLATF_SIMPLE_PHY; +#endif + + dm9000_reset(db); + + /* try multiple times, DM9000 sometimes gets the read wrong */ + for (i = 0; i < 8; i++) { + id_val = ior(db, DM9000_VIDL); + id_val |= (u32)ior(db, DM9000_VIDH) << 8; + id_val |= (u32)ior(db, DM9000_PIDL) << 16; + id_val |= (u32)ior(db, DM9000_PIDH) << 24; + + if (id_val == DM9000_ID) + break; + dev_err(db->dev, "read wrong id 0x%08x\n", id_val); + } + + if (id_val != DM9000_ID) { + dev_err(db->dev, "wrong id: 0x%08x\n", id_val); + ret = -ENODEV; + goto out; + } + + /* Identify what type of DM9000 we are working on */ + + id_val = ior(db, DM9000_CHIPR); + dev_dbg(db->dev, "dm9000 revision 0x%02x\n", id_val); + + switch (id_val) { + case CHIPR_DM9000A: + db->type = TYPE_DM9000A; + break; + case CHIPR_DM9000B: + db->type = TYPE_DM9000B; + break; + default: + dev_dbg(db->dev, "ID %02x => defaulting to DM9000E\n", id_val); + db->type = TYPE_DM9000E; + } + + /* dm9000a/b are capable of hardware checksum offload */ + if (db->type == TYPE_DM9000A || db->type == TYPE_DM9000B) { + ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM; + ndev->features |= ndev->hw_features; + } + + /* from this point we assume that we have found a DM9000 */ + + ndev->netdev_ops = &dm9000_netdev_ops; + ndev->watchdog_timeo = msecs_to_jiffies(watchdog); + ndev->ethtool_ops = &dm9000_ethtool_ops; + + db->msg_enable = NETIF_MSG_LINK; + db->mii.phy_id_mask = 0x1f; + db->mii.reg_num_mask = 0x1f; + db->mii.force_media = 0; + db->mii.full_duplex = 0; + db->mii.dev = ndev; + db->mii.mdio_read = dm9000_phy_read; + db->mii.mdio_write = dm9000_phy_write; + + mac_src = "eeprom"; + + /* try reading the node address from the attached EEPROM */ + for (i = 0; i < 6; i += 2) + dm9000_read_eeprom(db, i / 2, addr + i); + eth_hw_addr_set(ndev, addr); + + if (!is_valid_ether_addr(ndev->dev_addr) && pdata != NULL) { + mac_src = "platform data"; + eth_hw_addr_set(ndev, pdata->dev_addr); + } + + if (!is_valid_ether_addr(ndev->dev_addr)) { + /* try reading from mac */ + + mac_src = "chip"; + for (i = 0; i < 6; i++) + addr[i] = ior(db, i + DM9000_PAR); + eth_hw_addr_set(ndev, pdata->dev_addr); + } + + if (!is_valid_ether_addr(ndev->dev_addr)) { + inv_mac_addr = true; + eth_hw_addr_random(ndev); + mac_src = "random"; + } + + + platform_set_drvdata(pdev, ndev); + ret = register_netdev(ndev); + + if (ret == 0) { + if (inv_mac_addr) + dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please set using ip\n", + ndev->name); + printk(KERN_INFO "%s: dm9000%c at %p,%p IRQ %d MAC: %pM (%s)\n", + ndev->name, dm9000_type_to_char(db->type), + db->io_addr, db->io_data, ndev->irq, + ndev->dev_addr, mac_src); + } + return 0; + +out: + dev_err(db->dev, "not found (%d).\n", ret); + + dm9000_release_board(pdev, db); + free_netdev(ndev); + +out_regulator_disable: + if (!IS_ERR(power)) + regulator_disable(power); + + return ret; +} + +static int +dm9000_drv_suspend(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct board_info *db; + + if (ndev) { + db = netdev_priv(ndev); + db->in_suspend = 1; + + if (!netif_running(ndev)) + return 0; + + netif_device_detach(ndev); + + /* only shutdown if not using WoL */ + if (!db->wake_state) + dm9000_shutdown(ndev); + } + return 0; +} + +static int +dm9000_drv_resume(struct device *dev) +{ + struct net_device *ndev = dev_get_drvdata(dev); + struct board_info *db = netdev_priv(ndev); + + if (ndev) { + if (netif_running(ndev)) { + /* reset if we were not in wake mode to ensure if + * the device was powered off it is in a known state */ + if (!db->wake_state) { + dm9000_init_dm9000(ndev); + dm9000_unmask_interrupts(db); + } + + netif_device_attach(ndev); + } + + db->in_suspend = 0; + } + return 0; +} + +static const struct dev_pm_ops dm9000_drv_pm_ops = { + .suspend = dm9000_drv_suspend, + .resume = dm9000_drv_resume, +}; + +static int +dm9000_drv_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct board_info *dm = to_dm9000_board(ndev); + + unregister_netdev(ndev); + dm9000_release_board(pdev, dm); + free_netdev(ndev); /* free device structure */ + if (dm->power_supply) + regulator_disable(dm->power_supply); + + dev_dbg(&pdev->dev, "released and freed device\n"); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id dm9000_of_matches[] = { + { .compatible = "davicom,dm9000", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, dm9000_of_matches); +#endif + +static struct platform_driver dm9000_driver = { + .driver = { + .name = "dm9000", + .pm = &dm9000_drv_pm_ops, + .of_match_table = of_match_ptr(dm9000_of_matches), + }, + .probe = dm9000_probe, + .remove = dm9000_drv_remove, +}; + +module_platform_driver(dm9000_driver); + +MODULE_AUTHOR("Sascha Hauer, Ben Dooks"); +MODULE_DESCRIPTION("Davicom DM9000 network driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:dm9000"); diff --git a/drivers/net/ethernet/davicom/dm9000.h b/drivers/net/ethernet/davicom/dm9000.h new file mode 100644 index 000000000..581b35ad4 --- /dev/null +++ b/drivers/net/ethernet/davicom/dm9000.h @@ -0,0 +1,181 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * dm9000 Ethernet + */ + +#ifndef _DM9000X_H_ +#define _DM9000X_H_ + +#define DM9000_ID 0x90000A46 + +/* although the registers are 16 bit, they are 32-bit aligned. + */ + +#define DM9000_NCR 0x00 +#define DM9000_NSR 0x01 +#define DM9000_TCR 0x02 +#define DM9000_TSR1 0x03 +#define DM9000_TSR2 0x04 +#define DM9000_RCR 0x05 +#define DM9000_RSR 0x06 +#define DM9000_ROCR 0x07 +#define DM9000_BPTR 0x08 +#define DM9000_FCTR 0x09 +#define DM9000_FCR 0x0A +#define DM9000_EPCR 0x0B +#define DM9000_EPAR 0x0C +#define DM9000_EPDRL 0x0D +#define DM9000_EPDRH 0x0E +#define DM9000_WCR 0x0F + +#define DM9000_PAR 0x10 +#define DM9000_MAR 0x16 + +#define DM9000_GPCR 0x1e +#define DM9000_GPR 0x1f +#define DM9000_TRPAL 0x22 +#define DM9000_TRPAH 0x23 +#define DM9000_RWPAL 0x24 +#define DM9000_RWPAH 0x25 + +#define DM9000_VIDL 0x28 +#define DM9000_VIDH 0x29 +#define DM9000_PIDL 0x2A +#define DM9000_PIDH 0x2B + +#define DM9000_CHIPR 0x2C +#define DM9000_SMCR 0x2F + +#define DM9000_ETXCSR 0x30 +#define DM9000_TCCR 0x31 +#define DM9000_RCSR 0x32 + +#define CHIPR_DM9000A 0x19 +#define CHIPR_DM9000B 0x1A + +#define DM9000_MRCMDX 0xF0 +#define DM9000_MRCMD 0xF2 +#define DM9000_MRRL 0xF4 +#define DM9000_MRRH 0xF5 +#define DM9000_MWCMDX 0xF6 +#define DM9000_MWCMD 0xF8 +#define DM9000_MWRL 0xFA +#define DM9000_MWRH 0xFB +#define DM9000_TXPLL 0xFC +#define DM9000_TXPLH 0xFD +#define DM9000_ISR 0xFE +#define DM9000_IMR 0xFF + +#define NCR_EXT_PHY (1<<7) +#define NCR_WAKEEN (1<<6) +#define NCR_FCOL (1<<4) +#define NCR_FDX (1<<3) + +#define NCR_RESERVED (3<<1) +#define NCR_MAC_LBK (1<<1) +#define NCR_RST (1<<0) + +#define NSR_SPEED (1<<7) +#define NSR_LINKST (1<<6) +#define NSR_WAKEST (1<<5) +#define NSR_TX2END (1<<3) +#define NSR_TX1END (1<<2) +#define NSR_RXOV (1<<1) + +#define TCR_TJDIS (1<<6) +#define TCR_EXCECM (1<<5) +#define TCR_PAD_DIS2 (1<<4) +#define TCR_CRC_DIS2 (1<<3) +#define TCR_PAD_DIS1 (1<<2) +#define TCR_CRC_DIS1 (1<<1) +#define TCR_TXREQ (1<<0) + +#define TSR_TJTO (1<<7) +#define TSR_LC (1<<6) +#define TSR_NC (1<<5) +#define TSR_LCOL (1<<4) +#define TSR_COL (1<<3) +#define TSR_EC (1<<2) + +#define RCR_WTDIS (1<<6) +#define RCR_DIS_LONG (1<<5) +#define RCR_DIS_CRC (1<<4) +#define RCR_ALL (1<<3) +#define RCR_RUNT (1<<2) +#define RCR_PRMSC (1<<1) +#define RCR_RXEN (1<<0) + +#define RSR_RF (1<<7) +#define RSR_MF (1<<6) +#define RSR_LCS (1<<5) +#define RSR_RWTO (1<<4) +#define RSR_PLE (1<<3) +#define RSR_AE (1<<2) +#define RSR_CE (1<<1) +#define RSR_FOE (1<<0) + +#define WCR_LINKEN (1 << 5) +#define WCR_SAMPLEEN (1 << 4) +#define WCR_MAGICEN (1 << 3) +#define WCR_LINKST (1 << 2) +#define WCR_SAMPLEST (1 << 1) +#define WCR_MAGICST (1 << 0) + +#define FCTR_HWOT(ot) (( ot & 0xf ) << 4 ) +#define FCTR_LWOT(ot) ( ot & 0xf ) + +#define IMR_PAR (1<<7) +#define IMR_ROOM (1<<3) +#define IMR_ROM (1<<2) +#define IMR_PTM (1<<1) +#define IMR_PRM (1<<0) + +#define ISR_ROOS (1<<3) +#define ISR_ROS (1<<2) +#define ISR_PTS (1<<1) +#define ISR_PRS (1<<0) +#define ISR_CLR_STATUS (ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS) + +#define EPCR_REEP (1<<5) +#define EPCR_WEP (1<<4) +#define EPCR_EPOS (1<<3) +#define EPCR_ERPRR (1<<2) +#define EPCR_ERPRW (1<<1) +#define EPCR_ERRE (1<<0) + +#define GPCR_GEP_CNTL (1<<0) + +#define TCCR_IP (1<<0) +#define TCCR_TCP (1<<1) +#define TCCR_UDP (1<<2) + +#define RCSR_UDP_BAD (1<<7) +#define RCSR_TCP_BAD (1<<6) +#define RCSR_IP_BAD (1<<5) +#define RCSR_UDP (1<<4) +#define RCSR_TCP (1<<3) +#define RCSR_IP (1<<2) +#define RCSR_CSUM (1<<1) +#define RCSR_DISCARD (1<<0) + +#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */ +#define DM9000_PKT_ERR 0x02 +#define DM9000_PKT_MAX 1536 /* Received packet max size */ + +/* DM9000A / DM9000B definitions */ + +#define IMR_LNKCHNG (1<<5) +#define IMR_UNDERRUN (1<<4) + +#define ISR_LNKCHNG (1<<5) +#define ISR_UNDERRUN (1<<4) + +/* Davicom MII registers. + */ + +#define MII_DM_DSPCR 0x1b /* DSP Control Register */ + +#define DSPCR_INIT_PARAM 0xE100 /* DSP init parameter */ + +#endif /* _DM9000X_H_ */ + diff --git a/drivers/net/ethernet/davicom/dm9051.c b/drivers/net/ethernet/davicom/dm9051.c new file mode 100644 index 000000000..de7105a84 --- /dev/null +++ b/drivers/net/ethernet/davicom/dm9051.c @@ -0,0 +1,1262 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2022 Davicom Semiconductor,Inc. + * Davicom DM9051 SPI Fast Ethernet Linux driver + */ + +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/interrupt.h> +#include <linux/iopoll.h> +#include <linux/irq.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include <linux/regmap.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/spi/spi.h> +#include <linux/types.h> + +#include "dm9051.h" + +#define DRVNAME_9051 "dm9051" + +/** + * struct rx_ctl_mach - rx activities record + * @status_err_counter: rx status error counter + * @large_err_counter: rx get large packet length error counter + * @rx_err_counter: receive packet error counter + * @tx_err_counter: transmit packet error counter + * @fifo_rst_counter: reset operation counter + * + * To keep track for the driver operation statistics + */ +struct rx_ctl_mach { + u16 status_err_counter; + u16 large_err_counter; + u16 rx_err_counter; + u16 tx_err_counter; + u16 fifo_rst_counter; +}; + +/** + * struct dm9051_rxctrl - dm9051 driver rx control + * @hash_table: Multicast hash-table data + * @rcr_all: KS_RXCR1 register setting + * + * The settings needs to control the receive filtering + * such as the multicast hash-filter and the receive register settings + */ +struct dm9051_rxctrl { + u16 hash_table[4]; + u8 rcr_all; +}; + +/** + * struct dm9051_rxhdr - rx packet data header + * @headbyte: lead byte equal to 0x01 notifies a valid packet + * @status: status bits for the received packet + * @rxlen: packet length + * + * The Rx packed, entered into the FIFO memory, start with these + * four bytes which is the Rx header, followed by the ethernet + * packet data and ends with an appended 4-byte CRC data. + * Both Rx packet and CRC data are for check purpose and finally + * are dropped by this driver + */ +struct dm9051_rxhdr { + u8 headbyte; + u8 status; + __le16 rxlen; +}; + +/** + * struct board_info - maintain the saved data + * @spidev: spi device structure + * @ndev: net device structure + * @mdiobus: mii bus structure + * @phydev: phy device structure + * @txq: tx queue structure + * @regmap_dm: regmap for register read/write + * @regmap_dmbulk: extra regmap for bulk read/write + * @rxctrl_work: Work queue for updating RX mode and multicast lists + * @tx_work: Work queue for tx packets + * @pause: ethtool pause parameter structure + * @spi_lockm: between threads lock structure + * @reg_mutex: regmap access lock structure + * @bc: rx control statistics structure + * @rxhdr: rx header structure + * @rctl: rx control setting structure + * @msg_enable: message level value + * @imr_all: to store operating imr value for register DM9051_IMR + * @lcr_all: to store operating rcr value for register DM9051_LMCR + * + * The saved data variables, keep up to date for retrieval back to use + */ +struct board_info { + u32 msg_enable; + struct spi_device *spidev; + struct net_device *ndev; + struct mii_bus *mdiobus; + struct phy_device *phydev; + struct sk_buff_head txq; + struct regmap *regmap_dm; + struct regmap *regmap_dmbulk; + struct work_struct rxctrl_work; + struct work_struct tx_work; + struct ethtool_pauseparam pause; + struct mutex spi_lockm; + struct mutex reg_mutex; + struct rx_ctl_mach bc; + struct dm9051_rxhdr rxhdr; + struct dm9051_rxctrl rctl; + u8 imr_all; + u8 lcr_all; +}; + +static int dm9051_set_reg(struct board_info *db, unsigned int reg, unsigned int val) +{ + int ret; + + ret = regmap_write(db->regmap_dm, reg, val); + if (ret < 0) + netif_err(db, drv, db->ndev, "%s: error %d set reg %02x\n", + __func__, ret, reg); + return ret; +} + +static int dm9051_update_bits(struct board_info *db, unsigned int reg, unsigned int mask, + unsigned int val) +{ + int ret; + + ret = regmap_update_bits(db->regmap_dm, reg, mask, val); + if (ret < 0) + netif_err(db, drv, db->ndev, "%s: error %d update bits reg %02x\n", + __func__, ret, reg); + return ret; +} + +/* skb buffer exhausted, just discard the received data + */ +static int dm9051_dumpblk(struct board_info *db, u8 reg, size_t count) +{ + struct net_device *ndev = db->ndev; + unsigned int rb; + int ret; + + /* no skb buffer, + * both reg and &rb must be noinc, + * read once one byte via regmap_read + */ + do { + ret = regmap_read(db->regmap_dm, reg, &rb); + if (ret < 0) { + netif_err(db, drv, ndev, "%s: error %d dumping read reg %02x\n", + __func__, ret, reg); + break; + } + } while (--count); + + return ret; +} + +static int dm9051_set_regs(struct board_info *db, unsigned int reg, const void *val, + size_t val_count) +{ + int ret; + + ret = regmap_bulk_write(db->regmap_dmbulk, reg, val, val_count); + if (ret < 0) + netif_err(db, drv, db->ndev, "%s: error %d bulk writing regs %02x\n", + __func__, ret, reg); + return ret; +} + +static int dm9051_get_regs(struct board_info *db, unsigned int reg, void *val, + size_t val_count) +{ + int ret; + + ret = regmap_bulk_read(db->regmap_dmbulk, reg, val, val_count); + if (ret < 0) + netif_err(db, drv, db->ndev, "%s: error %d bulk reading regs %02x\n", + __func__, ret, reg); + return ret; +} + +static int dm9051_write_mem(struct board_info *db, unsigned int reg, const void *buff, + size_t len) +{ + int ret; + + ret = regmap_noinc_write(db->regmap_dm, reg, buff, len); + if (ret < 0) + netif_err(db, drv, db->ndev, "%s: error %d noinc writing regs %02x\n", + __func__, ret, reg); + return ret; +} + +static int dm9051_read_mem(struct board_info *db, unsigned int reg, void *buff, + size_t len) +{ + int ret; + + ret = regmap_noinc_read(db->regmap_dm, reg, buff, len); + if (ret < 0) + netif_err(db, drv, db->ndev, "%s: error %d noinc reading regs %02x\n", + __func__, ret, reg); + return ret; +} + +/* waiting tx-end rather than tx-req + * got faster + */ +static int dm9051_nsr_poll(struct board_info *db) +{ + unsigned int mval; + int ret; + + ret = regmap_read_poll_timeout(db->regmap_dm, DM9051_NSR, mval, + mval & (NSR_TX2END | NSR_TX1END), 1, 20); + if (ret == -ETIMEDOUT) + netdev_err(db->ndev, "timeout in checking for tx end\n"); + return ret; +} + +static int dm9051_epcr_poll(struct board_info *db) +{ + unsigned int mval; + int ret; + + ret = regmap_read_poll_timeout(db->regmap_dm, DM9051_EPCR, mval, + !(mval & EPCR_ERRE), 100, 10000); + if (ret == -ETIMEDOUT) + netdev_err(db->ndev, "eeprom/phy in processing get timeout\n"); + return ret; +} + +static int dm9051_irq_flag(struct board_info *db) +{ + struct spi_device *spi = db->spidev; + int irq_type = irq_get_trigger_type(spi->irq); + + if (irq_type) + return irq_type; + + return IRQF_TRIGGER_LOW; +} + +static unsigned int dm9051_intcr_value(struct board_info *db) +{ + return (dm9051_irq_flag(db) == IRQF_TRIGGER_LOW) ? + INTCR_POL_LOW : INTCR_POL_HIGH; +} + +static int dm9051_set_fcr(struct board_info *db) +{ + u8 fcr = 0; + + if (db->pause.rx_pause) + fcr |= FCR_BKPM | FCR_FLCE; + if (db->pause.tx_pause) + fcr |= FCR_TXPEN; + + return dm9051_set_reg(db, DM9051_FCR, fcr); +} + +static int dm9051_set_recv(struct board_info *db) +{ + int ret; + + ret = dm9051_set_regs(db, DM9051_MAR, db->rctl.hash_table, sizeof(db->rctl.hash_table)); + if (ret) + return ret; + + return dm9051_set_reg(db, DM9051_RCR, db->rctl.rcr_all); /* enable rx */ +} + +static int dm9051_core_reset(struct board_info *db) +{ + int ret; + + db->bc.fifo_rst_counter++; + + ret = regmap_write(db->regmap_dm, DM9051_NCR, NCR_RST); /* NCR reset */ + if (ret) + return ret; + ret = regmap_write(db->regmap_dm, DM9051_MBNDRY, MBNDRY_BYTE); /* MemBound */ + if (ret) + return ret; + ret = regmap_write(db->regmap_dm, DM9051_PPCR, PPCR_PAUSE_COUNT); /* Pause Count */ + if (ret) + return ret; + ret = regmap_write(db->regmap_dm, DM9051_LMCR, db->lcr_all); /* LEDMode1 */ + if (ret) + return ret; + + return dm9051_set_reg(db, DM9051_INTCR, dm9051_intcr_value(db)); +} + +static int dm9051_update_fcr(struct board_info *db) +{ + u8 fcr = 0; + + if (db->pause.rx_pause) + fcr |= FCR_BKPM | FCR_FLCE; + if (db->pause.tx_pause) + fcr |= FCR_TXPEN; + + return dm9051_update_bits(db, DM9051_FCR, FCR_RXTX_BITS, fcr); +} + +static int dm9051_disable_interrupt(struct board_info *db) +{ + return dm9051_set_reg(db, DM9051_IMR, IMR_PAR); /* disable int */ +} + +static int dm9051_enable_interrupt(struct board_info *db) +{ + return dm9051_set_reg(db, DM9051_IMR, db->imr_all); /* enable int */ +} + +static int dm9051_stop_mrcmd(struct board_info *db) +{ + return dm9051_set_reg(db, DM9051_ISR, ISR_STOP_MRCMD); /* to stop mrcmd */ +} + +static int dm9051_clear_interrupt(struct board_info *db) +{ + return dm9051_update_bits(db, DM9051_ISR, ISR_CLR_INT, ISR_CLR_INT); +} + +static int dm9051_eeprom_read(struct board_info *db, int offset, u8 *to) +{ + int ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPAR, offset); + if (ret) + return ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPCR, EPCR_ERPRR); + if (ret) + return ret; + + ret = dm9051_epcr_poll(db); + if (ret) + return ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPCR, 0); + if (ret) + return ret; + + return regmap_bulk_read(db->regmap_dmbulk, DM9051_EPDRL, to, 2); +} + +static int dm9051_eeprom_write(struct board_info *db, int offset, u8 *data) +{ + int ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPAR, offset); + if (ret) + return ret; + + ret = regmap_bulk_write(db->regmap_dmbulk, DM9051_EPDRL, data, 2); + if (ret < 0) + return ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPCR, EPCR_WEP | EPCR_ERPRW); + if (ret) + return ret; + + ret = dm9051_epcr_poll(db); + if (ret) + return ret; + + return regmap_write(db->regmap_dm, DM9051_EPCR, 0); +} + +static int dm9051_phyread(void *context, unsigned int reg, unsigned int *val) +{ + struct board_info *db = context; + int ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPAR, DM9051_PHY | reg); + if (ret) + return ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPCR, EPCR_ERPRR | EPCR_EPOS); + if (ret) + return ret; + + ret = dm9051_epcr_poll(db); + if (ret) + return ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPCR, 0); + if (ret) + return ret; + + /* this is a 4 bytes data, clear to zero since following regmap_bulk_read + * only fill lower 2 bytes + */ + *val = 0; + return regmap_bulk_read(db->regmap_dmbulk, DM9051_EPDRL, val, 2); +} + +static int dm9051_phywrite(void *context, unsigned int reg, unsigned int val) +{ + struct board_info *db = context; + int ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPAR, DM9051_PHY | reg); + if (ret) + return ret; + + ret = regmap_bulk_write(db->regmap_dmbulk, DM9051_EPDRL, &val, 2); + if (ret < 0) + return ret; + + ret = regmap_write(db->regmap_dm, DM9051_EPCR, EPCR_EPOS | EPCR_ERPRW); + if (ret) + return ret; + + ret = dm9051_epcr_poll(db); + if (ret) + return ret; + + return regmap_write(db->regmap_dm, DM9051_EPCR, 0); +} + +static int dm9051_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct board_info *db = bus->priv; + unsigned int val = 0xffff; + int ret; + + if (addr == DM9051_PHY_ADDR) { + ret = dm9051_phyread(db, regnum, &val); + if (ret) + return ret; + } + + return val; +} + +static int dm9051_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) +{ + struct board_info *db = bus->priv; + + if (addr == DM9051_PHY_ADDR) + return dm9051_phywrite(db, regnum, val); + + return -ENODEV; +} + +static void dm9051_reg_lock_mutex(void *dbcontext) +{ + struct board_info *db = dbcontext; + + mutex_lock(&db->reg_mutex); +} + +static void dm9051_reg_unlock_mutex(void *dbcontext) +{ + struct board_info *db = dbcontext; + + mutex_unlock(&db->reg_mutex); +} + +static struct regmap_config regconfigdm = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xff, + .reg_stride = 1, + .cache_type = REGCACHE_NONE, + .read_flag_mask = 0, + .write_flag_mask = DM_SPI_WR, + .val_format_endian = REGMAP_ENDIAN_LITTLE, + .lock = dm9051_reg_lock_mutex, + .unlock = dm9051_reg_unlock_mutex, +}; + +static struct regmap_config regconfigdmbulk = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0xff, + .reg_stride = 1, + .cache_type = REGCACHE_NONE, + .read_flag_mask = 0, + .write_flag_mask = DM_SPI_WR, + .val_format_endian = REGMAP_ENDIAN_LITTLE, + .lock = dm9051_reg_lock_mutex, + .unlock = dm9051_reg_unlock_mutex, + .use_single_read = true, + .use_single_write = true, +}; + +static int dm9051_map_init(struct spi_device *spi, struct board_info *db) +{ + /* create two regmap instances, + * split read/write and bulk_read/bulk_write to individual regmap + * to resolve regmap execution confliction problem + */ + regconfigdm.lock_arg = db; + db->regmap_dm = devm_regmap_init_spi(db->spidev, ®configdm); + if (IS_ERR(db->regmap_dm)) + return PTR_ERR(db->regmap_dm); + + regconfigdmbulk.lock_arg = db; + db->regmap_dmbulk = devm_regmap_init_spi(db->spidev, ®configdmbulk); + if (IS_ERR(db->regmap_dmbulk)) + return PTR_ERR(db->regmap_dmbulk); + + return 0; +} + +static int dm9051_map_chipid(struct board_info *db) +{ + struct device *dev = &db->spidev->dev; + unsigned short wid; + u8 buff[6]; + int ret; + + ret = dm9051_get_regs(db, DM9051_VIDL, buff, sizeof(buff)); + if (ret < 0) + return ret; + + wid = get_unaligned_le16(buff + 2); + if (wid != DM9051_ID) { + dev_err(dev, "chipid error as %04x !\n", wid); + return -ENODEV; + } + + dev_info(dev, "chip %04x found\n", wid); + return 0; +} + +/* Read DM9051_PAR registers which is the mac address loaded from EEPROM while power-on + */ +static int dm9051_map_etherdev_par(struct net_device *ndev, struct board_info *db) +{ + u8 addr[ETH_ALEN]; + int ret; + + ret = dm9051_get_regs(db, DM9051_PAR, addr, sizeof(addr)); + if (ret < 0) + return ret; + + if (!is_valid_ether_addr(addr)) { + eth_hw_addr_random(ndev); + + ret = dm9051_set_regs(db, DM9051_PAR, ndev->dev_addr, sizeof(ndev->dev_addr)); + if (ret < 0) + return ret; + + dev_dbg(&db->spidev->dev, "Use random MAC address\n"); + return 0; + } + + eth_hw_addr_set(ndev, addr); + return 0; +} + +/* ethtool-ops + */ +static void dm9051_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + strscpy(info->driver, DRVNAME_9051, sizeof(info->driver)); +} + +static void dm9051_set_msglevel(struct net_device *ndev, u32 value) +{ + struct board_info *db = to_dm9051_board(ndev); + + db->msg_enable = value; +} + +static u32 dm9051_get_msglevel(struct net_device *ndev) +{ + struct board_info *db = to_dm9051_board(ndev); + + return db->msg_enable; +} + +static int dm9051_get_eeprom_len(struct net_device *dev) +{ + return 128; +} + +static int dm9051_get_eeprom(struct net_device *ndev, + struct ethtool_eeprom *ee, u8 *data) +{ + struct board_info *db = to_dm9051_board(ndev); + int offset = ee->offset; + int len = ee->len; + int i, ret; + + if ((len | offset) & 1) + return -EINVAL; + + ee->magic = DM_EEPROM_MAGIC; + + for (i = 0; i < len; i += 2) { + ret = dm9051_eeprom_read(db, (offset + i) / 2, data + i); + if (ret) + break; + } + return ret; +} + +static int dm9051_set_eeprom(struct net_device *ndev, + struct ethtool_eeprom *ee, u8 *data) +{ + struct board_info *db = to_dm9051_board(ndev); + int offset = ee->offset; + int len = ee->len; + int i, ret; + + if ((len | offset) & 1) + return -EINVAL; + + if (ee->magic != DM_EEPROM_MAGIC) + return -EINVAL; + + for (i = 0; i < len; i += 2) { + ret = dm9051_eeprom_write(db, (offset + i) / 2, data + i); + if (ret) + break; + } + return ret; +} + +static void dm9051_get_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *pause) +{ + struct board_info *db = to_dm9051_board(ndev); + + *pause = db->pause; +} + +static int dm9051_set_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *pause) +{ + struct board_info *db = to_dm9051_board(ndev); + + db->pause = *pause; + + if (pause->autoneg == AUTONEG_DISABLE) + return dm9051_update_fcr(db); + + phy_set_sym_pause(db->phydev, pause->rx_pause, pause->tx_pause, + pause->autoneg); + phy_start_aneg(db->phydev); + return 0; +} + +static const struct ethtool_ops dm9051_ethtool_ops = { + .get_drvinfo = dm9051_get_drvinfo, + .get_link_ksettings = phy_ethtool_get_link_ksettings, + .set_link_ksettings = phy_ethtool_set_link_ksettings, + .get_msglevel = dm9051_get_msglevel, + .set_msglevel = dm9051_set_msglevel, + .nway_reset = phy_ethtool_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = dm9051_get_eeprom_len, + .get_eeprom = dm9051_get_eeprom, + .set_eeprom = dm9051_set_eeprom, + .get_pauseparam = dm9051_get_pauseparam, + .set_pauseparam = dm9051_set_pauseparam, +}; + +static int dm9051_all_start(struct board_info *db) +{ + int ret; + + /* GPR power on of the internal phy + */ + ret = dm9051_set_reg(db, DM9051_GPR, 0); + if (ret) + return ret; + + /* dm9051 chip registers could not be accessed within 1 ms + * after GPR power on, delay 1 ms is essential + */ + msleep(1); + + ret = dm9051_core_reset(db); + if (ret) + return ret; + + return dm9051_enable_interrupt(db); +} + +static int dm9051_all_stop(struct board_info *db) +{ + int ret; + + /* GPR power off of the internal phy, + * The internal phy still could be accessed after this GPR power off control + */ + ret = dm9051_set_reg(db, DM9051_GPR, GPR_PHY_OFF); + if (ret) + return ret; + + return dm9051_set_reg(db, DM9051_RCR, RCR_RX_DISABLE); +} + +/* fifo reset while rx error found + */ +static int dm9051_all_restart(struct board_info *db) +{ + struct net_device *ndev = db->ndev; + int ret; + + ret = dm9051_core_reset(db); + if (ret) + return ret; + + ret = dm9051_enable_interrupt(db); + if (ret) + return ret; + + netdev_dbg(ndev, " rxstatus_Er & rxlen_Er %d, RST_c %d\n", + db->bc.status_err_counter + db->bc.large_err_counter, + db->bc.fifo_rst_counter); + + ret = dm9051_set_recv(db); + if (ret) + return ret; + + return dm9051_set_fcr(db); +} + +/* read packets from the fifo memory + * return value, + * > 0 - read packet number, caller can repeat the rx operation + * 0 - no error, caller need stop further rx operation + * -EBUSY - read data error, caller escape from rx operation + */ +static int dm9051_loop_rx(struct board_info *db) +{ + struct net_device *ndev = db->ndev; + unsigned int rxbyte; + int ret, rxlen; + struct sk_buff *skb; + u8 *rdptr; + int scanrr = 0; + + do { + ret = dm9051_read_mem(db, DM_SPI_MRCMDX, &rxbyte, 2); + if (ret) + return ret; + + if ((rxbyte & GENMASK(7, 0)) != DM9051_PKT_RDY) + break; /* exhaust-empty */ + + ret = dm9051_read_mem(db, DM_SPI_MRCMD, &db->rxhdr, DM_RXHDR_SIZE); + if (ret) + return ret; + + ret = dm9051_stop_mrcmd(db); + if (ret) + return ret; + + rxlen = le16_to_cpu(db->rxhdr.rxlen); + if (db->rxhdr.status & RSR_ERR_BITS || rxlen > DM9051_PKT_MAX) { + netdev_dbg(ndev, "rxhdr-byte (%02x)\n", + db->rxhdr.headbyte); + + if (db->rxhdr.status & RSR_ERR_BITS) { + db->bc.status_err_counter++; + netdev_dbg(ndev, "check rxstatus-error (%02x)\n", + db->rxhdr.status); + } else { + db->bc.large_err_counter++; + netdev_dbg(ndev, "check rxlen large-error (%d > %d)\n", + rxlen, DM9051_PKT_MAX); + } + return dm9051_all_restart(db); + } + + skb = dev_alloc_skb(rxlen); + if (!skb) { + ret = dm9051_dumpblk(db, DM_SPI_MRCMD, rxlen); + if (ret) + return ret; + return scanrr; + } + + rdptr = skb_put(skb, rxlen - 4); + ret = dm9051_read_mem(db, DM_SPI_MRCMD, rdptr, rxlen); + if (ret) { + db->bc.rx_err_counter++; + dev_kfree_skb(skb); + return ret; + } + + ret = dm9051_stop_mrcmd(db); + if (ret) { + dev_kfree_skb(skb); + return ret; + } + + skb->protocol = eth_type_trans(skb, db->ndev); + if (db->ndev->features & NETIF_F_RXCSUM) + skb_checksum_none_assert(skb); + netif_rx(skb); + db->ndev->stats.rx_bytes += rxlen; + db->ndev->stats.rx_packets++; + scanrr++; + } while (!ret); + + return scanrr; +} + +/* transmit a packet, + * return value, + * 0 - succeed + * -ETIMEDOUT - timeout error + */ +static int dm9051_single_tx(struct board_info *db, u8 *buff, unsigned int len) +{ + int ret; + + ret = dm9051_nsr_poll(db); + if (ret) + return ret; + + ret = dm9051_write_mem(db, DM_SPI_MWCMD, buff, len); + if (ret) + return ret; + + ret = dm9051_set_regs(db, DM9051_TXPLL, &len, 2); + if (ret < 0) + return ret; + + return dm9051_set_reg(db, DM9051_TCR, TCR_TXREQ); +} + +static int dm9051_loop_tx(struct board_info *db) +{ + struct net_device *ndev = db->ndev; + int ntx = 0; + int ret; + + while (!skb_queue_empty(&db->txq)) { + struct sk_buff *skb; + unsigned int len; + + skb = skb_dequeue(&db->txq); + if (skb) { + ntx++; + ret = dm9051_single_tx(db, skb->data, skb->len); + len = skb->len; + dev_kfree_skb(skb); + if (ret < 0) { + db->bc.tx_err_counter++; + return 0; + } + ndev->stats.tx_bytes += len; + ndev->stats.tx_packets++; + } + + if (netif_queue_stopped(ndev) && + (skb_queue_len(&db->txq) < DM9051_TX_QUE_LO_WATER)) + netif_wake_queue(ndev); + } + + return ntx; +} + +static irqreturn_t dm9051_rx_threaded_irq(int irq, void *pw) +{ + struct board_info *db = pw; + int result, result_tx; + + mutex_lock(&db->spi_lockm); + + result = dm9051_disable_interrupt(db); + if (result) + goto out_unlock; + + result = dm9051_clear_interrupt(db); + if (result) + goto out_unlock; + + do { + result = dm9051_loop_rx(db); /* threaded irq rx */ + if (result < 0) + goto out_unlock; + result_tx = dm9051_loop_tx(db); /* more tx better performance */ + if (result_tx < 0) + goto out_unlock; + } while (result > 0); + + dm9051_enable_interrupt(db); + + /* To exit and has mutex unlock while rx or tx error + */ +out_unlock: + mutex_unlock(&db->spi_lockm); + + return IRQ_HANDLED; +} + +static void dm9051_tx_delay(struct work_struct *work) +{ + struct board_info *db = container_of(work, struct board_info, tx_work); + int result; + + mutex_lock(&db->spi_lockm); + + result = dm9051_loop_tx(db); + if (result < 0) + netdev_err(db->ndev, "transmit packet error\n"); + + mutex_unlock(&db->spi_lockm); +} + +static void dm9051_rxctl_delay(struct work_struct *work) +{ + struct board_info *db = container_of(work, struct board_info, rxctrl_work); + struct net_device *ndev = db->ndev; + int result; + + mutex_lock(&db->spi_lockm); + + result = dm9051_set_regs(db, DM9051_PAR, ndev->dev_addr, sizeof(ndev->dev_addr)); + if (result < 0) + goto out_unlock; + + dm9051_set_recv(db); + + /* To has mutex unlock and return from this function if regmap function fail + */ +out_unlock: + mutex_unlock(&db->spi_lockm); +} + +/* Open network device + * Called when the network device is marked active, such as a user executing + * 'ifconfig up' on the device + */ +static int dm9051_open(struct net_device *ndev) +{ + struct board_info *db = to_dm9051_board(ndev); + struct spi_device *spi = db->spidev; + int ret; + + db->imr_all = IMR_PAR | IMR_PRM; + db->lcr_all = LMCR_MODE1; + db->rctl.rcr_all = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN; + memset(db->rctl.hash_table, 0, sizeof(db->rctl.hash_table)); + + ndev->irq = spi->irq; /* by dts */ + ret = request_threaded_irq(spi->irq, NULL, dm9051_rx_threaded_irq, + dm9051_irq_flag(db) | IRQF_ONESHOT, + ndev->name, db); + if (ret < 0) { + netdev_err(ndev, "failed to get irq\n"); + return ret; + } + + phy_support_sym_pause(db->phydev); + phy_start(db->phydev); + + /* flow control parameters init */ + db->pause.rx_pause = true; + db->pause.tx_pause = true; + db->pause.autoneg = AUTONEG_DISABLE; + + if (db->phydev->autoneg) + db->pause.autoneg = AUTONEG_ENABLE; + + ret = dm9051_all_start(db); + if (ret) { + phy_stop(db->phydev); + free_irq(spi->irq, db); + return ret; + } + + netif_wake_queue(ndev); + + return 0; +} + +/* Close network device + * Called to close down a network device which has been active. Cancel any + * work, shutdown the RX and TX process and then place the chip into a low + * power state while it is not being used + */ +static int dm9051_stop(struct net_device *ndev) +{ + struct board_info *db = to_dm9051_board(ndev); + int ret; + + ret = dm9051_all_stop(db); + if (ret) + return ret; + + flush_work(&db->tx_work); + flush_work(&db->rxctrl_work); + + phy_stop(db->phydev); + + free_irq(db->spidev->irq, db); + + netif_stop_queue(ndev); + + skb_queue_purge(&db->txq); + + return 0; +} + +/* event: play a schedule starter in condition + */ +static netdev_tx_t dm9051_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + struct board_info *db = to_dm9051_board(ndev); + + skb_queue_tail(&db->txq, skb); + if (skb_queue_len(&db->txq) > DM9051_TX_QUE_HI_WATER) + netif_stop_queue(ndev); /* enforce limit queue size */ + + schedule_work(&db->tx_work); + + return NETDEV_TX_OK; +} + +/* event: play with a schedule starter + */ +static void dm9051_set_rx_mode(struct net_device *ndev) +{ + struct board_info *db = to_dm9051_board(ndev); + struct dm9051_rxctrl rxctrl; + struct netdev_hw_addr *ha; + u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN; + u32 hash_val; + + memset(&rxctrl, 0, sizeof(rxctrl)); + + /* rx control */ + if (ndev->flags & IFF_PROMISC) { + rcr |= RCR_PRMSC; + netdev_dbg(ndev, "set_multicast rcr |= RCR_PRMSC, rcr= %02x\n", rcr); + } + + if (ndev->flags & IFF_ALLMULTI) { + rcr |= RCR_ALL; + netdev_dbg(ndev, "set_multicast rcr |= RCR_ALLMULTI, rcr= %02x\n", rcr); + } + + rxctrl.rcr_all = rcr; + + /* broadcast address */ + rxctrl.hash_table[0] = 0; + rxctrl.hash_table[1] = 0; + rxctrl.hash_table[2] = 0; + rxctrl.hash_table[3] = 0x8000; + + /* the multicast address in Hash Table : 64 bits */ + netdev_for_each_mc_addr(ha, ndev) { + hash_val = ether_crc_le(ETH_ALEN, ha->addr) & GENMASK(5, 0); + rxctrl.hash_table[hash_val / 16] |= BIT(0) << (hash_val % 16); + } + + /* schedule work to do the actual set of the data if needed */ + + if (memcmp(&db->rctl, &rxctrl, sizeof(rxctrl))) { + memcpy(&db->rctl, &rxctrl, sizeof(rxctrl)); + schedule_work(&db->rxctrl_work); + } +} + +/* event: write into the mac registers and eeprom directly + */ +static int dm9051_set_mac_address(struct net_device *ndev, void *p) +{ + struct board_info *db = to_dm9051_board(ndev); + int ret; + + ret = eth_prepare_mac_addr_change(ndev, p); + if (ret < 0) + return ret; + + eth_commit_mac_addr_change(ndev, p); + return dm9051_set_regs(db, DM9051_PAR, ndev->dev_addr, sizeof(ndev->dev_addr)); +} + +static const struct net_device_ops dm9051_netdev_ops = { + .ndo_open = dm9051_open, + .ndo_stop = dm9051_stop, + .ndo_start_xmit = dm9051_start_xmit, + .ndo_set_rx_mode = dm9051_set_rx_mode, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = dm9051_set_mac_address, +}; + +static void dm9051_operation_clear(struct board_info *db) +{ + db->bc.status_err_counter = 0; + db->bc.large_err_counter = 0; + db->bc.rx_err_counter = 0; + db->bc.tx_err_counter = 0; + db->bc.fifo_rst_counter = 0; +} + +static int dm9051_mdio_register(struct board_info *db) +{ + struct spi_device *spi = db->spidev; + int ret; + + db->mdiobus = devm_mdiobus_alloc(&spi->dev); + if (!db->mdiobus) + return -ENOMEM; + + db->mdiobus->priv = db; + db->mdiobus->read = dm9051_mdio_read; + db->mdiobus->write = dm9051_mdio_write; + db->mdiobus->name = "dm9051-mdiobus"; + db->mdiobus->phy_mask = (u32)~BIT(1); + db->mdiobus->parent = &spi->dev; + snprintf(db->mdiobus->id, MII_BUS_ID_SIZE, + "dm9051-%s.%u", dev_name(&spi->dev), spi->chip_select); + + ret = devm_mdiobus_register(&spi->dev, db->mdiobus); + if (ret) + dev_err(&spi->dev, "Could not register MDIO bus\n"); + + return ret; +} + +static void dm9051_handle_link_change(struct net_device *ndev) +{ + struct board_info *db = to_dm9051_board(ndev); + + phy_print_status(db->phydev); + + /* only write pause settings to mac. since mac and phy are integrated + * together, such as link state, speed and duplex are sync already + */ + if (db->phydev->link) { + if (db->phydev->pause) { + db->pause.rx_pause = true; + db->pause.tx_pause = true; + } + dm9051_update_fcr(db); + } +} + +/* phy connect as poll mode + */ +static int dm9051_phy_connect(struct board_info *db) +{ + char phy_id[MII_BUS_ID_SIZE + 3]; + + snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, + db->mdiobus->id, DM9051_PHY_ADDR); + + db->phydev = phy_connect(db->ndev, phy_id, dm9051_handle_link_change, + PHY_INTERFACE_MODE_MII); + if (IS_ERR(db->phydev)) + return PTR_ERR_OR_ZERO(db->phydev); + return 0; +} + +static int dm9051_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct net_device *ndev; + struct board_info *db; + int ret; + + ndev = devm_alloc_etherdev(dev, sizeof(struct board_info)); + if (!ndev) + return -ENOMEM; + + SET_NETDEV_DEV(ndev, dev); + dev_set_drvdata(dev, ndev); + + db = netdev_priv(ndev); + + db->msg_enable = 0; + db->spidev = spi; + db->ndev = ndev; + + ndev->netdev_ops = &dm9051_netdev_ops; + ndev->ethtool_ops = &dm9051_ethtool_ops; + + mutex_init(&db->spi_lockm); + mutex_init(&db->reg_mutex); + + INIT_WORK(&db->rxctrl_work, dm9051_rxctl_delay); + INIT_WORK(&db->tx_work, dm9051_tx_delay); + + ret = dm9051_map_init(spi, db); + if (ret) + return ret; + + ret = dm9051_map_chipid(db); + if (ret) + return ret; + + ret = dm9051_map_etherdev_par(ndev, db); + if (ret < 0) + return ret; + + ret = dm9051_mdio_register(db); + if (ret) + return ret; + + ret = dm9051_phy_connect(db); + if (ret) + return ret; + + dm9051_operation_clear(db); + skb_queue_head_init(&db->txq); + + ret = devm_register_netdev(dev, ndev); + if (ret) { + phy_disconnect(db->phydev); + return dev_err_probe(dev, ret, "device register failed"); + } + + return 0; +} + +static void dm9051_drv_remove(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct net_device *ndev = dev_get_drvdata(dev); + struct board_info *db = to_dm9051_board(ndev); + + phy_disconnect(db->phydev); +} + +static const struct of_device_id dm9051_match_table[] = { + { .compatible = "davicom,dm9051" }, + {} +}; + +static const struct spi_device_id dm9051_id_table[] = { + { "dm9051", 0 }, + {} +}; + +static struct spi_driver dm9051_driver = { + .driver = { + .name = DRVNAME_9051, + .of_match_table = dm9051_match_table, + }, + .probe = dm9051_probe, + .remove = dm9051_drv_remove, + .id_table = dm9051_id_table, +}; +module_spi_driver(dm9051_driver); + +MODULE_AUTHOR("Joseph CHANG <joseph_chang@davicom.com.tw>"); +MODULE_DESCRIPTION("Davicom DM9051 network SPI driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/davicom/dm9051.h b/drivers/net/ethernet/davicom/dm9051.h new file mode 100644 index 000000000..fef3120ed --- /dev/null +++ b/drivers/net/ethernet/davicom/dm9051.h @@ -0,0 +1,162 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2022 Davicom Semiconductor,Inc. + * Davicom DM9051 SPI Fast Ethernet Linux driver + */ + +#ifndef _DM9051_H_ +#define _DM9051_H_ + +#include <linux/bits.h> +#include <linux/netdevice.h> +#include <linux/types.h> + +#define DM9051_ID 0x9051 + +#define DM9051_NCR 0x00 +#define DM9051_NSR 0x01 +#define DM9051_TCR 0x02 +#define DM9051_RCR 0x05 +#define DM9051_BPTR 0x08 +#define DM9051_FCR 0x0A +#define DM9051_EPCR 0x0B +#define DM9051_EPAR 0x0C +#define DM9051_EPDRL 0x0D +#define DM9051_EPDRH 0x0E +#define DM9051_PAR 0x10 +#define DM9051_MAR 0x16 +#define DM9051_GPCR 0x1E +#define DM9051_GPR 0x1F + +#define DM9051_VIDL 0x28 +#define DM9051_VIDH 0x29 +#define DM9051_PIDL 0x2A +#define DM9051_PIDH 0x2B +#define DM9051_SMCR 0x2F +#define DM9051_ATCR 0x30 +#define DM9051_SPIBCR 0x38 +#define DM9051_INTCR 0x39 +#define DM9051_PPCR 0x3D + +#define DM9051_MPCR 0x55 +#define DM9051_LMCR 0x57 +#define DM9051_MBNDRY 0x5E + +#define DM9051_MRRL 0x74 +#define DM9051_MRRH 0x75 +#define DM9051_MWRL 0x7A +#define DM9051_MWRH 0x7B +#define DM9051_TXPLL 0x7C +#define DM9051_TXPLH 0x7D +#define DM9051_ISR 0x7E +#define DM9051_IMR 0x7F + +#define DM_SPI_MRCMDX 0x70 +#define DM_SPI_MRCMD 0x72 +#define DM_SPI_MWCMD 0x78 + +#define DM_SPI_WR 0x80 + +/* dm9051 Ethernet controller registers bits + */ +/* 0x00 */ +#define NCR_WAKEEN BIT(6) +#define NCR_FDX BIT(3) +#define NCR_RST BIT(0) +/* 0x01 */ +#define NSR_SPEED BIT(7) +#define NSR_LINKST BIT(6) +#define NSR_WAKEST BIT(5) +#define NSR_TX2END BIT(3) +#define NSR_TX1END BIT(2) +/* 0x02 */ +#define TCR_DIS_JABBER_TIMER BIT(6) /* for Jabber Packet support */ +#define TCR_TXREQ BIT(0) +/* 0x05 */ +#define RCR_DIS_WATCHDOG_TIMER BIT(6) /* for Jabber Packet support */ +#define RCR_DIS_LONG BIT(5) +#define RCR_DIS_CRC BIT(4) +#define RCR_ALL BIT(3) +#define RCR_PRMSC BIT(1) +#define RCR_RXEN BIT(0) +#define RCR_RX_DISABLE (RCR_DIS_LONG | RCR_DIS_CRC) +/* 0x06 */ +#define RSR_RF BIT(7) +#define RSR_MF BIT(6) +#define RSR_LCS BIT(5) +#define RSR_RWTO BIT(4) +#define RSR_PLE BIT(3) +#define RSR_AE BIT(2) +#define RSR_CE BIT(1) +#define RSR_FOE BIT(0) +#define RSR_ERR_BITS (RSR_RF | RSR_LCS | RSR_RWTO | RSR_PLE | \ + RSR_AE | RSR_CE | RSR_FOE) +/* 0x0A */ +#define FCR_TXPEN BIT(5) +#define FCR_BKPM BIT(3) +#define FCR_FLCE BIT(0) +#define FCR_RXTX_BITS (FCR_TXPEN | FCR_BKPM | FCR_FLCE) +/* 0x0B */ +#define EPCR_WEP BIT(4) +#define EPCR_EPOS BIT(3) +#define EPCR_ERPRR BIT(2) +#define EPCR_ERPRW BIT(1) +#define EPCR_ERRE BIT(0) +/* 0x1E */ +#define GPCR_GEP_CNTL BIT(0) +/* 0x1F */ +#define GPR_PHY_OFF BIT(0) +/* 0x30 */ +#define ATCR_AUTO_TX BIT(7) +/* 0x39 */ +#define INTCR_POL_LOW (1 << 0) +#define INTCR_POL_HIGH (0 << 0) +/* 0x3D */ +/* Pause Packet Control Register - default = 1 */ +#define PPCR_PAUSE_COUNT 0x08 +/* 0x55 */ +#define MPCR_RSTTX BIT(1) +#define MPCR_RSTRX BIT(0) +/* 0x57 */ +/* LEDMode Control Register - LEDMode1 */ +/* Value 0x81 : bit[7] = 1, bit[2] = 0, bit[1:0] = 01b */ +#define LMCR_NEWMOD BIT(7) +#define LMCR_TYPED1 BIT(1) +#define LMCR_TYPED0 BIT(0) +#define LMCR_MODE1 (LMCR_NEWMOD | LMCR_TYPED0) +/* 0x5E */ +#define MBNDRY_BYTE BIT(7) +/* 0xFE */ +#define ISR_MBS BIT(7) +#define ISR_LNKCHG BIT(5) +#define ISR_ROOS BIT(3) +#define ISR_ROS BIT(2) +#define ISR_PTS BIT(1) +#define ISR_PRS BIT(0) +#define ISR_CLR_INT (ISR_LNKCHG | ISR_ROOS | ISR_ROS | \ + ISR_PTS | ISR_PRS) +#define ISR_STOP_MRCMD (ISR_MBS) +/* 0xFF */ +#define IMR_PAR BIT(7) +#define IMR_LNKCHGI BIT(5) +#define IMR_PTM BIT(1) +#define IMR_PRM BIT(0) + +/* Const + */ +#define DM9051_PHY_ADDR 1 /* PHY id */ +#define DM9051_PHY 0x40 /* PHY address 0x01 */ +#define DM9051_PKT_RDY 0x01 /* Packet ready to receive */ +#define DM9051_PKT_MAX 1536 /* Received packet max size */ +#define DM9051_TX_QUE_HI_WATER 50 +#define DM9051_TX_QUE_LO_WATER 25 +#define DM_EEPROM_MAGIC 0x9051 + +#define DM_RXHDR_SIZE sizeof(struct dm9051_rxhdr) + +static inline struct board_info *to_dm9051_board(struct net_device *ndev) +{ + return netdev_priv(ndev); +} + +#endif /* _DM9051_H_ */ |