Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 240 insertions, 0 deletions

diff --git a/drivers/net/ethernet/i825xx/lasi_82596.c b/drivers/net/ethernet/i825xx/lasi_82596.c
new file mode 100644
index 000000000..0af70094a
--- /dev/null
+++ b/drivers/net/ethernet/i825xx/lasi_82596.c
@@ -0,0 +1,240 @@
+/* lasi_82596.c -- driver for the intel 82596 ethernet controller, as
+   munged into HPPA boxen .
+
+   This driver is based upon 82596.c, original credits are below...
+   but there were too many hoops which HP wants jumped through to
+   keep this code in there in a sane manner.
+
+   3 primary sources of the mess --
+   1) hppa needs *lots* of cacheline flushing to keep this kind of
+   MMIO running.
+
+   2) The 82596 needs to see all of its pointers as their physical
+   address.  Thus virt_to_bus/bus_to_virt are *everywhere*.
+
+   3) The implementation HP is using seems to be significantly pickier
+   about when and how the command and RX units are started.  some
+   command ordering was changed.
+
+   Examination of the mach driver leads one to believe that there
+   might be a saner way to pull this off...  anyone who feels like a
+   full rewrite can be my guest.
+
+   Split 02/13/2000 Sam Creasey (sammy@oh.verio.com)
+
+   02/01/2000  Initial modifications for parisc by Helge Deller (deller@gmx.de)
+   03/02/2000  changes for better/correct(?) cache-flushing (deller)
+*/
+
+/* 82596.c: A generic 82596 ethernet driver for linux. */
+/*
+   Based on Apricot.c
+   Written 1994 by Mark Evans.
+   This driver is for the Apricot 82596 bus-master interface
+
+   Modularised 12/94 Mark Evans
+
+
+   Modified to support the 82596 ethernet chips on 680x0 VME boards.
+   by Richard Hirst <richard@sleepie.demon.co.uk>
+   Renamed to be 82596.c
+
+   980825:  Changed to receive directly in to sk_buffs which are
+   allocated at open() time.  Eliminates copy on incoming frames
+   (small ones are still copied).  Shared data now held in a
+   non-cached page, so we can run on 68060 in copyback mode.
+
+   TBD:
+   * look at deferring rx frames rather than discarding (as per tulip)
+   * handle tx ring full as per tulip
+   * performance test to tune rx_copybreak
+
+   Most of my modifications relate to the braindead big-endian
+   implementation by Intel.  When the i596 is operating in
+   'big-endian' mode, it thinks a 32 bit value of 0x12345678
+   should be stored as 0x56781234.  This is a real pain, when
+   you have linked lists which are shared by the 680x0 and the
+   i596.
+
+   Driver skeleton
+   Written 1993 by Donald Becker.
+   Copyright 1993 United States Government as represented by the Director,
+   National Security Agency. This software may only be used and distributed
+   according to the terms of the GNU General Public License as modified by SRC,
+   incorporated herein by reference.
+
+   The author may be reached as becker@scyld.com, or C/O
+   Scyld Computing Corporation, 410 Severn Ave., Suite 210, Annapolis MD 21403
+
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pdc.h>
+#include <asm/parisc-device.h>
+
+#define LASI_82596_DRIVER_VERSION "LASI 82596 driver - Revision: 1.30"
+
+#define PA_I82596_RESET		0	/* Offsets relative to LASI-LAN-Addr.*/
+#define PA_CPU_PORT_L_ACCESS	4
+#define PA_CHANNEL_ATTENTION	8
+
+#define OPT_SWAP_PORT	0x0001	/* Need to wordswp on the MPU port */
+
+#define SYSBUS      0x0000006c
+
+/* big endian CPU, 82596 "big" endian mode */
+#define SWAP32(x)   (((u32)(x)<<16) | ((((u32)(x)))>>16))
+#define SWAP16(x)   (x)
+
+#define NONCOHERENT_DMA 1
+
+#include "lib82596.c"
+
+MODULE_AUTHOR("Richard Hirst");
+MODULE_DESCRIPTION("i82596 driver");
+MODULE_LICENSE("GPL");
+module_param(i596_debug, int, 0);
+MODULE_PARM_DESC(i596_debug, "lasi_82596 debug mask");
+
+static inline void ca(struct net_device *dev)
+{
+	gsc_writel(0, dev->base_addr + PA_CHANNEL_ATTENTION);
+}
+
+
+static void mpu_port(struct net_device *dev, int c, dma_addr_t x)
+{
+	struct i596_private *lp = netdev_priv(dev);
+
+	u32 v = (u32) (c) | (u32) (x);
+	u16 a, b;
+
+	if (lp->options & OPT_SWAP_PORT) {
+		a = v >> 16;
+		b = v & 0xffff;
+	} else {
+		a = v & 0xffff;
+		b = v >> 16;
+	}
+
+	gsc_writel(a, dev->base_addr + PA_CPU_PORT_L_ACCESS);
+	if (!running_on_qemu)
+		udelay(1);
+	gsc_writel(b, dev->base_addr + PA_CPU_PORT_L_ACCESS);
+}
+
+#define LAN_PROM_ADDR	0xF0810000
+
+static int __init
+lan_init_chip(struct parisc_device *dev)
+{
+	struct	net_device *netdevice;
+	struct i596_private *lp;
+	int retval = -ENOMEM;
+	u8 addr[ETH_ALEN];
+	int i;
+
+	if (!dev->irq) {
+		printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
+			__FILE__, (unsigned long)dev->hpa.start);
+		return -ENODEV;
+	}
+
+	printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n",
+			(unsigned long)dev->hpa.start, dev->irq);
+
+	netdevice = alloc_etherdev(sizeof(struct i596_private));
+	if (!netdevice)
+		return -ENOMEM;
+	SET_NETDEV_DEV(netdevice, &dev->dev);
+	parisc_set_drvdata (dev, netdevice);
+
+	netdevice->base_addr = dev->hpa.start;
+	netdevice->irq = dev->irq;
+
+	if (pdc_lan_station_id(addr, netdevice->base_addr)) {
+		for (i = 0; i < 6; i++) {
+			addr[i] = gsc_readb(LAN_PROM_ADDR + i);
+		}
+		printk(KERN_INFO
+		       "%s: MAC of HP700 LAN read from EEPROM\n", __FILE__);
+	}
+	eth_hw_addr_set(netdevice, addr);
+
+	lp = netdev_priv(netdevice);
+	lp->options = dev->id.sversion == 0x72 ? OPT_SWAP_PORT : 0;
+	lp->dma = dma_alloc_noncoherent(&dev->dev,
+			sizeof(struct i596_dma), &lp->dma_addr,
+			DMA_BIDIRECTIONAL, GFP_KERNEL);
+	if (!lp->dma)
+		goto out_free_netdev;
+
+	retval = i82596_probe(netdevice);
+	if (retval)
+		goto out_free_dma;
+	return 0;
+
+out_free_dma:
+	dma_free_noncoherent(&dev->dev, sizeof(struct i596_dma),
+		       lp->dma, lp->dma_addr, DMA_BIDIRECTIONAL);
+out_free_netdev:
+	free_netdev(netdevice);
+	return retval;
+}
+
+static void __exit lan_remove_chip(struct parisc_device *pdev)
+{
+	struct net_device *dev = parisc_get_drvdata(pdev);
+	struct i596_private *lp = netdev_priv(dev);
+
+	unregister_netdev (dev);
+	dma_free_noncoherent(&pdev->dev, sizeof(struct i596_private), lp->dma,
+		       lp->dma_addr, DMA_BIDIRECTIONAL);
+	free_netdev (dev);
+}
+
+static const struct parisc_device_id lan_tbl[] __initconst = {
+	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008a },
+	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00072 },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(parisc, lan_tbl);
+
+static struct parisc_driver lan_driver __refdata = {
+	.name		= "lasi_82596",
+	.id_table	= lan_tbl,
+	.probe		= lan_init_chip,
+	.remove         = __exit_p(lan_remove_chip),
+};
+
+static int lasi_82596_init(void)
+{
+	printk(KERN_INFO LASI_82596_DRIVER_VERSION "\n");
+	return register_parisc_driver(&lan_driver);
+}
+
+module_init(lasi_82596_init);
+
+static void __exit lasi_82596_exit(void)
+{
+	unregister_parisc_driver(&lan_driver);
+}
+
+module_exit(lasi_82596_exit);