Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2109 insertions, 0 deletions

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
new file mode 100644
index 000000000..2eb9d5a32
--- /dev/null
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -0,0 +1,2109 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * DaVinci Ethernet Medium Access Controller
+ *
+ * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * ---------------------------------------------------------------------------
+ * History:
+ * 0-5 A number of folks worked on this driver in bits and pieces but the major
+ *     contribution came from Suraj Iyer and Anant Gole
+ * 6.0 Anant Gole - rewrote the driver as per Linux conventions
+ * 6.1 Chaithrika U S - added support for Gigabit and RMII features,
+ *     PHY layer usage
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/highmem.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/semaphore.h>
+#include <linux/phy.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/pm_runtime.h>
+#include <linux/davinci_emac.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_mdio.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+
+#include <asm/irq.h>
+#include <asm/page.h>
+
+#include "cpsw.h"
+#include "davinci_cpdma.h"
+
+static int debug_level;
+module_param(debug_level, int, 0);
+MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)");
+
+/* Netif debug messages possible */
+#define DAVINCI_EMAC_DEBUG	(NETIF_MSG_DRV | \
+				NETIF_MSG_PROBE | \
+				NETIF_MSG_LINK | \
+				NETIF_MSG_TIMER | \
+				NETIF_MSG_IFDOWN | \
+				NETIF_MSG_IFUP | \
+				NETIF_MSG_RX_ERR | \
+				NETIF_MSG_TX_ERR | \
+				NETIF_MSG_TX_QUEUED | \
+				NETIF_MSG_INTR | \
+				NETIF_MSG_TX_DONE | \
+				NETIF_MSG_RX_STATUS | \
+				NETIF_MSG_PKTDATA | \
+				NETIF_MSG_HW | \
+				NETIF_MSG_WOL)
+
+/* version info */
+#define EMAC_MAJOR_VERSION	6
+#define EMAC_MINOR_VERSION	1
+#define EMAC_MODULE_VERSION	"6.1"
+MODULE_VERSION(EMAC_MODULE_VERSION);
+static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
+
+/* Configuration items */
+#define EMAC_DEF_PASS_CRC		(0) /* Do not pass CRC up to frames */
+#define EMAC_DEF_QOS_EN			(0) /* EMAC proprietary QoS disabled */
+#define EMAC_DEF_NO_BUFF_CHAIN		(0) /* No buffer chain */
+#define EMAC_DEF_MACCTRL_FRAME_EN	(0) /* Discard Maccontrol frames */
+#define EMAC_DEF_SHORT_FRAME_EN		(0) /* Discard short frames */
+#define EMAC_DEF_ERROR_FRAME_EN		(0) /* Discard error frames */
+#define EMAC_DEF_PROM_EN		(0) /* Promiscuous disabled */
+#define EMAC_DEF_PROM_CH		(0) /* Promiscuous channel is 0 */
+#define EMAC_DEF_BCAST_EN		(1) /* Broadcast enabled */
+#define EMAC_DEF_BCAST_CH		(0) /* Broadcast channel is 0 */
+#define EMAC_DEF_MCAST_EN		(1) /* Multicast enabled */
+#define EMAC_DEF_MCAST_CH		(0) /* Multicast channel is 0 */
+
+#define EMAC_DEF_TXPRIO_FIXED		(1) /* TX Priority is fixed */
+#define EMAC_DEF_TXPACING_EN		(0) /* TX pacing NOT supported*/
+
+#define EMAC_DEF_BUFFER_OFFSET		(0) /* Buffer offset to DMA (future) */
+#define EMAC_DEF_MIN_ETHPKTSIZE		(60) /* Minimum ethernet pkt size */
+#define EMAC_DEF_MAX_FRAME_SIZE		(1500 + 14 + 4 + 4)
+#define EMAC_DEF_TX_CH			(0) /* Default 0th channel */
+#define EMAC_DEF_RX_CH			(0) /* Default 0th channel */
+#define EMAC_DEF_RX_NUM_DESC		(128)
+#define EMAC_DEF_MAX_TX_CH		(1) /* Max TX channels configured */
+#define EMAC_DEF_MAX_RX_CH		(1) /* Max RX channels configured */
+
+/* Buffer descriptor parameters */
+#define EMAC_DEF_TX_MAX_SERVICE		(32) /* TX max service BD's */
+#define EMAC_DEF_RX_MAX_SERVICE		(64) /* should = netdev->weight */
+
+/* EMAC register related defines */
+#define EMAC_ALL_MULTI_REG_VALUE	(0xFFFFFFFF)
+#define EMAC_NUM_MULTICAST_BITS		(64)
+#define EMAC_TX_CONTROL_TX_ENABLE_VAL	(0x1)
+#define EMAC_RX_CONTROL_RX_ENABLE_VAL	(0x1)
+#define EMAC_MAC_HOST_ERR_INTMASK_VAL	(0x2)
+#define EMAC_RX_UNICAST_CLEAR_ALL	(0xFF)
+#define EMAC_INT_MASK_CLEAR		(0xFF)
+
+/* RX MBP register bit positions */
+#define EMAC_RXMBP_PASSCRC_MASK		BIT(30)
+#define EMAC_RXMBP_QOSEN_MASK		BIT(29)
+#define EMAC_RXMBP_NOCHAIN_MASK		BIT(28)
+#define EMAC_RXMBP_CMFEN_MASK		BIT(24)
+#define EMAC_RXMBP_CSFEN_MASK		BIT(23)
+#define EMAC_RXMBP_CEFEN_MASK		BIT(22)
+#define EMAC_RXMBP_CAFEN_MASK		BIT(21)
+#define EMAC_RXMBP_PROMCH_SHIFT		(16)
+#define EMAC_RXMBP_PROMCH_MASK		(0x7 << 16)
+#define EMAC_RXMBP_BROADEN_MASK		BIT(13)
+#define EMAC_RXMBP_BROADCH_SHIFT	(8)
+#define EMAC_RXMBP_BROADCH_MASK		(0x7 << 8)
+#define EMAC_RXMBP_MULTIEN_MASK		BIT(5)
+#define EMAC_RXMBP_MULTICH_SHIFT	(0)
+#define EMAC_RXMBP_MULTICH_MASK		(0x7)
+#define EMAC_RXMBP_CHMASK		(0x7)
+
+/* EMAC register definitions/bit maps used */
+# define EMAC_MBP_RXPROMISC		(0x00200000)
+# define EMAC_MBP_PROMISCCH(ch)		(((ch) & 0x7) << 16)
+# define EMAC_MBP_RXBCAST		(0x00002000)
+# define EMAC_MBP_BCASTCHAN(ch)		(((ch) & 0x7) << 8)
+# define EMAC_MBP_RXMCAST		(0x00000020)
+# define EMAC_MBP_MCASTCHAN(ch)		((ch) & 0x7)
+
+/* EMAC mac_control register */
+#define EMAC_MACCONTROL_TXPTYPE		BIT(9)
+#define EMAC_MACCONTROL_TXPACEEN	BIT(6)
+#define EMAC_MACCONTROL_GMIIEN		BIT(5)
+#define EMAC_MACCONTROL_GIGABITEN	BIT(7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN	BIT(0)
+#define EMAC_MACCONTROL_RMIISPEED_MASK	BIT(15)
+
+/* GIGABIT MODE related bits */
+#define EMAC_DM646X_MACCONTORL_GIG	BIT(7)
+#define EMAC_DM646X_MACCONTORL_GIGFORCE	BIT(17)
+
+/* EMAC mac_status register */
+#define EMAC_MACSTATUS_TXERRCODE_MASK	(0xF00000)
+#define EMAC_MACSTATUS_TXERRCODE_SHIFT	(20)
+#define EMAC_MACSTATUS_TXERRCH_MASK	(0x70000)
+#define EMAC_MACSTATUS_TXERRCH_SHIFT	(16)
+#define EMAC_MACSTATUS_RXERRCODE_MASK	(0xF000)
+#define EMAC_MACSTATUS_RXERRCODE_SHIFT	(12)
+#define EMAC_MACSTATUS_RXERRCH_MASK	(0x700)
+#define EMAC_MACSTATUS_RXERRCH_SHIFT	(8)
+
+/* EMAC RX register masks */
+#define EMAC_RX_MAX_LEN_MASK		(0xFFFF)
+#define EMAC_RX_BUFFER_OFFSET_MASK	(0xFFFF)
+
+/* MAC_IN_VECTOR (0x180) register bit fields */
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	BIT(17)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	BIT(16)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	BIT(8)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	BIT(0)
+
+/** NOTE:: For DM646x the IN_VECTOR has changed */
+#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC	BIT(EMAC_DEF_RX_CH)
+#define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC	BIT(16 + EMAC_DEF_TX_CH)
+#define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT	BIT(26)
+#define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT	BIT(27)
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT		BIT(31)
+#define EMAC_CPPI_EOP_BIT		BIT(30)
+#define EMAC_CPPI_OWNERSHIP_BIT		BIT(29)
+#define EMAC_CPPI_EOQ_BIT		BIT(28)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27)
+#define EMAC_CPPI_PASS_CRC_BIT		BIT(26)
+#define EMAC_RX_BD_BUF_SIZE		(0xFFFF)
+#define EMAC_BD_LENGTH_FOR_CACHE	(16) /* only CPPI bytes */
+#define EMAC_RX_BD_PKT_LENGTH_MASK	(0xFFFF)
+
+/* Max hardware defines */
+#define EMAC_MAX_TXRX_CHANNELS		 (8)  /* Max hardware channels */
+#define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */
+
+/* EMAC Peripheral Device Register Memory Layout structure */
+#define EMAC_MACINVECTOR	0x90
+
+#define EMAC_DM646X_MACEOIVECTOR	0x94
+
+#define EMAC_MACINTSTATRAW	0xB0
+#define EMAC_MACINTSTATMASKED	0xB4
+#define EMAC_MACINTMASKSET	0xB8
+#define EMAC_MACINTMASKCLEAR	0xBC
+
+#define EMAC_RXMBPENABLE	0x100
+#define EMAC_RXUNICASTSET	0x104
+#define EMAC_RXUNICASTCLEAR	0x108
+#define EMAC_RXMAXLEN		0x10C
+#define EMAC_RXBUFFEROFFSET	0x110
+#define EMAC_RXFILTERLOWTHRESH	0x114
+
+#define EMAC_MACCONTROL		0x160
+#define EMAC_MACSTATUS		0x164
+#define EMAC_EMCONTROL		0x168
+#define EMAC_FIFOCONTROL	0x16C
+#define EMAC_MACCONFIG		0x170
+#define EMAC_SOFTRESET		0x174
+#define EMAC_MACSRCADDRLO	0x1D0
+#define EMAC_MACSRCADDRHI	0x1D4
+#define EMAC_MACHASH1		0x1D8
+#define EMAC_MACHASH2		0x1DC
+#define EMAC_MACADDRLO		0x500
+#define EMAC_MACADDRHI		0x504
+#define EMAC_MACINDEX		0x508
+
+/* EMAC statistics registers */
+#define EMAC_RXGOODFRAMES	0x200
+#define EMAC_RXBCASTFRAMES	0x204
+#define EMAC_RXMCASTFRAMES	0x208
+#define EMAC_RXPAUSEFRAMES	0x20C
+#define EMAC_RXCRCERRORS	0x210
+#define EMAC_RXALIGNCODEERRORS	0x214
+#define EMAC_RXOVERSIZED	0x218
+#define EMAC_RXJABBER		0x21C
+#define EMAC_RXUNDERSIZED	0x220
+#define EMAC_RXFRAGMENTS	0x224
+#define EMAC_RXFILTERED		0x228
+#define EMAC_RXQOSFILTERED	0x22C
+#define EMAC_RXOCTETS		0x230
+#define EMAC_TXGOODFRAMES	0x234
+#define EMAC_TXBCASTFRAMES	0x238
+#define EMAC_TXMCASTFRAMES	0x23C
+#define EMAC_TXPAUSEFRAMES	0x240
+#define EMAC_TXDEFERRED		0x244
+#define EMAC_TXCOLLISION	0x248
+#define EMAC_TXSINGLECOLL	0x24C
+#define EMAC_TXMULTICOLL	0x250
+#define EMAC_TXEXCESSIVECOLL	0x254
+#define EMAC_TXLATECOLL		0x258
+#define EMAC_TXUNDERRUN		0x25C
+#define EMAC_TXCARRIERSENSE	0x260
+#define EMAC_TXOCTETS		0x264
+#define EMAC_NETOCTETS		0x280
+#define EMAC_RXSOFOVERRUNS	0x284
+#define EMAC_RXMOFOVERRUNS	0x288
+#define EMAC_RXDMAOVERRUNS	0x28C
+
+/* EMAC DM644x control registers */
+#define EMAC_CTRL_EWCTL		(0x4)
+#define EMAC_CTRL_EWINTTCNT	(0x8)
+
+/* EMAC DM644x control module masks */
+#define EMAC_DM644X_EWINTCNT_MASK	0x1FFFF
+#define EMAC_DM644X_INTMIN_INTVL	0x1
+#define EMAC_DM644X_INTMAX_INTVL	(EMAC_DM644X_EWINTCNT_MASK)
+
+/* EMAC DM646X control module registers */
+#define EMAC_DM646X_CMINTCTRL	0x0C
+#define EMAC_DM646X_CMRXINTEN	0x14
+#define EMAC_DM646X_CMTXINTEN	0x18
+#define EMAC_DM646X_CMRXINTMAX	0x70
+#define EMAC_DM646X_CMTXINTMAX	0x74
+
+/* EMAC DM646X control module masks */
+#define EMAC_DM646X_INTPACEEN		(0x3 << 16)
+#define EMAC_DM646X_INTPRESCALE_MASK	(0x7FF << 0)
+#define EMAC_DM646X_CMINTMAX_CNT	63
+#define EMAC_DM646X_CMINTMIN_CNT	2
+#define EMAC_DM646X_CMINTMAX_INTVL	(1000 / EMAC_DM646X_CMINTMIN_CNT)
+#define EMAC_DM646X_CMINTMIN_INTVL	((1000 / EMAC_DM646X_CMINTMAX_CNT) + 1)
+
+
+/* EMAC EOI codes for C0 */
+#define EMAC_DM646X_MAC_EOI_C0_RXEN	(0x01)
+#define EMAC_DM646X_MAC_EOI_C0_TXEN	(0x02)
+
+/* EMAC Stats Clear Mask */
+#define EMAC_STATS_CLR_MASK    (0xFFFFFFFF)
+
+/* emac_priv: EMAC private data structure
+ *
+ * EMAC adapter private data structure
+ */
+struct emac_priv {
+	u32 msg_enable;
+	struct net_device *ndev;
+	struct platform_device *pdev;
+	struct napi_struct napi;
+	char mac_addr[6];
+	void __iomem *remap_addr;
+	u32 emac_base_phys;
+	void __iomem *emac_base;
+	void __iomem *ctrl_base;
+	struct cpdma_ctlr *dma;
+	struct cpdma_chan *txchan;
+	struct cpdma_chan *rxchan;
+	u32 link; /* 1=link on, 0=link off */
+	u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */
+	u32 duplex; /* Link duplex: 0=Half, 1=Full */
+	u32 rx_buf_size;
+	u32 isr_count;
+	u32 coal_intvl;
+	u32 bus_freq_mhz;
+	u8 rmii_en;
+	u8 version;
+	u32 mac_hash1;
+	u32 mac_hash2;
+	u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS];
+	u32 rx_addr_type;
+	const char *phy_id;
+	struct device_node *phy_node;
+	spinlock_t lock;
+	/*platform specific members*/
+	void (*int_enable) (void);
+	void (*int_disable) (void);
+};
+
+/* EMAC TX Host Error description strings */
+static char *emac_txhost_errcodes[16] = {
+	"No error", "SOP error", "Ownership bit not set in SOP buffer",
+	"Zero Next Buffer Descriptor Pointer Without EOP",
+	"Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error",
+	"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
+	"Reserved", "Reserved", "Reserved", "Reserved"
+};
+
+/* EMAC RX Host Error description strings */
+static char *emac_rxhost_errcodes[16] = {
+	"No error", "Reserved", "Ownership bit not set in input buffer",
+	"Reserved", "Zero Buffer Pointer", "Reserved", "Reserved",
+	"Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
+	"Reserved", "Reserved", "Reserved", "Reserved"
+};
+
+/* Helper macros */
+#define emac_read(reg)		  ioread32(priv->emac_base + (reg))
+#define emac_write(reg, val)      iowrite32(val, priv->emac_base + (reg))
+
+#define emac_ctrl_read(reg)	  ioread32((priv->ctrl_base + (reg)))
+#define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg)))
+
+/**
+ * emac_get_drvinfo - Get EMAC driver information
+ * @ndev: The DaVinci EMAC network adapter
+ * @info: ethtool info structure containing name and version
+ *
+ * Returns EMAC driver information (name and version)
+ *
+ */
+static void emac_get_drvinfo(struct net_device *ndev,
+			     struct ethtool_drvinfo *info)
+{
+	strscpy(info->driver, emac_version_string, sizeof(info->driver));
+	strscpy(info->version, EMAC_MODULE_VERSION, sizeof(info->version));
+}
+
+/**
+ * emac_get_coalesce - Get interrupt coalesce settings for this device
+ * @ndev : The DaVinci EMAC network adapter
+ * @coal : ethtool coalesce settings structure
+ * @kernel_coal: ethtool CQE mode setting structure
+ * @extack: extack for reporting error messages
+ *
+ * Fetch the current interrupt coalesce settings
+ *
+ */
+static int emac_get_coalesce(struct net_device *ndev,
+			     struct ethtool_coalesce *coal,
+			     struct kernel_ethtool_coalesce *kernel_coal,
+			     struct netlink_ext_ack *extack)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	coal->rx_coalesce_usecs = priv->coal_intvl;
+	return 0;
+
+}
+
+/**
+ * emac_set_coalesce - Set interrupt coalesce settings for this device
+ * @ndev : The DaVinci EMAC network adapter
+ * @coal : ethtool coalesce settings structure
+ * @kernel_coal: ethtool CQE mode setting structure
+ * @extack: extack for reporting error messages
+ *
+ * Set interrupt coalesce parameters
+ *
+ */
+static int emac_set_coalesce(struct net_device *ndev,
+			     struct ethtool_coalesce *coal,
+			     struct kernel_ethtool_coalesce *kernel_coal,
+			     struct netlink_ext_ack *extack)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	u32 int_ctrl, num_interrupts = 0;
+	u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0;
+
+	if (!coal->rx_coalesce_usecs) {
+		priv->coal_intvl = 0;
+
+		switch (priv->version) {
+		case EMAC_VERSION_2:
+			emac_ctrl_write(EMAC_DM646X_CMINTCTRL, 0);
+			break;
+		default:
+			emac_ctrl_write(EMAC_CTRL_EWINTTCNT, 0);
+			break;
+		}
+
+		return 0;
+	}
+
+	coal_intvl = coal->rx_coalesce_usecs;
+
+	switch (priv->version) {
+	case EMAC_VERSION_2:
+		int_ctrl =  emac_ctrl_read(EMAC_DM646X_CMINTCTRL);
+		prescale = priv->bus_freq_mhz * 4;
+
+		if (coal_intvl < EMAC_DM646X_CMINTMIN_INTVL)
+			coal_intvl = EMAC_DM646X_CMINTMIN_INTVL;
+
+		if (coal_intvl > EMAC_DM646X_CMINTMAX_INTVL) {
+			/*
+			 * Interrupt pacer works with 4us Pulse, we can
+			 * throttle further by dilating the 4us pulse.
+			 */
+			addnl_dvdr = EMAC_DM646X_INTPRESCALE_MASK / prescale;
+
+			if (addnl_dvdr > 1) {
+				prescale *= addnl_dvdr;
+				if (coal_intvl > (EMAC_DM646X_CMINTMAX_INTVL
+							* addnl_dvdr))
+					coal_intvl = (EMAC_DM646X_CMINTMAX_INTVL
+							* addnl_dvdr);
+			} else {
+				addnl_dvdr = 1;
+				coal_intvl = EMAC_DM646X_CMINTMAX_INTVL;
+			}
+		}
+
+		num_interrupts = (1000 * addnl_dvdr) / coal_intvl;
+
+		int_ctrl |= EMAC_DM646X_INTPACEEN;
+		int_ctrl &= (~EMAC_DM646X_INTPRESCALE_MASK);
+		int_ctrl |= (prescale & EMAC_DM646X_INTPRESCALE_MASK);
+		emac_ctrl_write(EMAC_DM646X_CMINTCTRL, int_ctrl);
+
+		emac_ctrl_write(EMAC_DM646X_CMRXINTMAX, num_interrupts);
+		emac_ctrl_write(EMAC_DM646X_CMTXINTMAX, num_interrupts);
+
+		break;
+	default:
+		int_ctrl = emac_ctrl_read(EMAC_CTRL_EWINTTCNT);
+		int_ctrl &= (~EMAC_DM644X_EWINTCNT_MASK);
+		prescale = coal_intvl * priv->bus_freq_mhz;
+		if (prescale > EMAC_DM644X_EWINTCNT_MASK) {
+			prescale = EMAC_DM644X_EWINTCNT_MASK;
+			coal_intvl = prescale / priv->bus_freq_mhz;
+		}
+		emac_ctrl_write(EMAC_CTRL_EWINTTCNT, (int_ctrl | prescale));
+
+		break;
+	}
+
+	printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl);
+	priv->coal_intvl = coal_intvl;
+
+	return 0;
+
+}
+
+
+/* ethtool_ops: DaVinci EMAC Ethtool structure
+ *
+ * Ethtool support for EMAC adapter
+ */
+static const struct ethtool_ops ethtool_ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS,
+	.get_drvinfo = emac_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+	.get_coalesce = emac_get_coalesce,
+	.set_coalesce =  emac_set_coalesce,
+	.get_ts_info = ethtool_op_get_ts_info,
+	.get_link_ksettings = phy_ethtool_get_link_ksettings,
+	.set_link_ksettings = phy_ethtool_set_link_ksettings,
+};
+
+/**
+ * emac_update_phystatus - Update Phy status
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Updates phy status and takes action for network queue if required
+ * based upon link status
+ *
+ */
+static void emac_update_phystatus(struct emac_priv *priv)
+{
+	u32 mac_control;
+	u32 new_duplex;
+	u32 cur_duplex;
+	struct net_device *ndev = priv->ndev;
+
+	mac_control = emac_read(EMAC_MACCONTROL);
+	cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ?
+			DUPLEX_FULL : DUPLEX_HALF;
+	if (ndev->phydev)
+		new_duplex = ndev->phydev->duplex;
+	else
+		new_duplex = DUPLEX_FULL;
+
+	/* We get called only if link has changed (speed/duplex/status) */
+	if ((priv->link) && (new_duplex != cur_duplex)) {
+		priv->duplex = new_duplex;
+		if (DUPLEX_FULL == priv->duplex)
+			mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN);
+		else
+			mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN);
+	}
+
+	if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
+		mac_control = emac_read(EMAC_MACCONTROL);
+		mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
+				EMAC_DM646X_MACCONTORL_GIGFORCE);
+	} else {
+		/* Clear the GIG bit and GIGFORCE bit */
+		mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE |
+					EMAC_DM646X_MACCONTORL_GIG);
+
+		if (priv->rmii_en && (priv->speed == SPEED_100))
+			mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK;
+		else
+			mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK;
+	}
+
+	/* Update mac_control if changed */
+	emac_write(EMAC_MACCONTROL, mac_control);
+
+	if (priv->link) {
+		/* link ON */
+		if (!netif_carrier_ok(ndev))
+			netif_carrier_on(ndev);
+	/* reactivate the transmit queue if it is stopped */
+		if (netif_running(ndev) && netif_queue_stopped(ndev))
+			netif_wake_queue(ndev);
+	} else {
+		/* link OFF */
+		if (netif_carrier_ok(ndev))
+			netif_carrier_off(ndev);
+		if (!netif_queue_stopped(ndev))
+			netif_stop_queue(ndev);
+	}
+}
+
+/**
+ * hash_get - Calculate hash value from mac address
+ * @addr: mac address to delete from hash table
+ *
+ * Calculates hash value from mac address
+ *
+ */
+static u32 hash_get(u8 *addr)
+{
+	u32 hash;
+	u8 tmpval;
+	int cnt;
+	hash = 0;
+
+	for (cnt = 0; cnt < 2; cnt++) {
+		tmpval = *addr++;
+		hash ^= (tmpval >> 2) ^ (tmpval << 4);
+		tmpval = *addr++;
+		hash ^= (tmpval >> 4) ^ (tmpval << 2);
+		tmpval = *addr++;
+		hash ^= (tmpval >> 6) ^ (tmpval);
+	}
+
+	return hash & 0x3F;
+}
+
+/**
+ * emac_hash_add - Hash function to add mac addr from hash table
+ * @priv: The DaVinci EMAC private adapter structure
+ * @mac_addr: mac address to delete from hash table
+ *
+ * Adds mac address to the internal hash table
+ *
+ */
+static int emac_hash_add(struct emac_priv *priv, u8 *mac_addr)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	u32 rc = 0;
+	u32 hash_bit;
+	u32 hash_value = hash_get(mac_addr);
+
+	if (hash_value >= EMAC_NUM_MULTICAST_BITS) {
+		if (netif_msg_drv(priv)) {
+			dev_err(emac_dev, "DaVinci EMAC: emac_hash_add(): Invalid "\
+				"Hash %08x, should not be greater than %08x",
+				hash_value, (EMAC_NUM_MULTICAST_BITS - 1));
+		}
+		return -1;
+	}
+
+	/* set the hash bit only if not previously set */
+	if (priv->multicast_hash_cnt[hash_value] == 0) {
+		rc = 1; /* hash value changed */
+		if (hash_value < 32) {
+			hash_bit = BIT(hash_value);
+			priv->mac_hash1 |= hash_bit;
+		} else {
+			hash_bit = BIT((hash_value - 32));
+			priv->mac_hash2 |= hash_bit;
+		}
+	}
+
+	/* incr counter for num of mcast addr's mapped to "this" hash bit */
+	++priv->multicast_hash_cnt[hash_value];
+
+	return rc;
+}
+
+/**
+ * emac_hash_del - Hash function to delete mac addr from hash table
+ * @priv: The DaVinci EMAC private adapter structure
+ * @mac_addr: mac address to delete from hash table
+ *
+ * Removes mac address from the internal hash table
+ *
+ */
+static int emac_hash_del(struct emac_priv *priv, u8 *mac_addr)
+{
+	u32 hash_value;
+	u32 hash_bit;
+
+	hash_value = hash_get(mac_addr);
+	if (priv->multicast_hash_cnt[hash_value] > 0) {
+		/* dec cntr for num of mcast addr's mapped to this hash bit */
+		--priv->multicast_hash_cnt[hash_value];
+	}
+
+	/* if counter still > 0, at least one multicast address refers
+	 * to this hash bit. so return 0 */
+	if (priv->multicast_hash_cnt[hash_value] > 0)
+		return 0;
+
+	if (hash_value < 32) {
+		hash_bit = BIT(hash_value);
+		priv->mac_hash1 &= ~hash_bit;
+	} else {
+		hash_bit = BIT((hash_value - 32));
+		priv->mac_hash2 &= ~hash_bit;
+	}
+
+	/* return 1 to indicate change in mac_hash registers reqd */
+	return 1;
+}
+
+/* EMAC multicast operation */
+#define EMAC_MULTICAST_ADD	0
+#define EMAC_MULTICAST_DEL	1
+#define EMAC_ALL_MULTI_SET	2
+#define EMAC_ALL_MULTI_CLR	3
+
+/**
+ * emac_add_mcast - Set multicast address in the EMAC adapter (Internal)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @action: multicast operation to perform
+ * @mac_addr: mac address to set
+ *
+ * Set multicast addresses in EMAC adapter - internal function
+ *
+ */
+static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+	int update = -1;
+
+	switch (action) {
+	case EMAC_MULTICAST_ADD:
+		update = emac_hash_add(priv, mac_addr);
+		break;
+	case EMAC_MULTICAST_DEL:
+		update = emac_hash_del(priv, mac_addr);
+		break;
+	case EMAC_ALL_MULTI_SET:
+		update = 1;
+		priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE;
+		priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE;
+		break;
+	case EMAC_ALL_MULTI_CLR:
+		update = 1;
+		priv->mac_hash1 = 0;
+		priv->mac_hash2 = 0;
+		memset(&(priv->multicast_hash_cnt[0]), 0,
+		sizeof(priv->multicast_hash_cnt[0]) *
+		       EMAC_NUM_MULTICAST_BITS);
+		break;
+	default:
+		if (netif_msg_drv(priv))
+			dev_err(emac_dev, "DaVinci EMAC: add_mcast"\
+				": bad operation %d", action);
+		break;
+	}
+
+	/* write to the hardware only if the register status chances */
+	if (update > 0) {
+		emac_write(EMAC_MACHASH1, priv->mac_hash1);
+		emac_write(EMAC_MACHASH2, priv->mac_hash2);
+	}
+}
+
+/**
+ * emac_dev_mcast_set - Set multicast address in the EMAC adapter
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Set multicast addresses in EMAC adapter
+ *
+ */
+static void emac_dev_mcast_set(struct net_device *ndev)
+{
+	u32 mbp_enable;
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	mbp_enable = emac_read(EMAC_RXMBPENABLE);
+	if (ndev->flags & IFF_PROMISC) {
+		mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH));
+		mbp_enable |= (EMAC_MBP_RXPROMISC);
+	} else {
+		mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC);
+		if ((ndev->flags & IFF_ALLMULTI) ||
+		    netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) {
+			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
+			emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL);
+		} else if (!netdev_mc_empty(ndev)) {
+			struct netdev_hw_addr *ha;
+
+			mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
+			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
+			/* program multicast address list into EMAC hardware */
+			netdev_for_each_mc_addr(ha, ndev) {
+				emac_add_mcast(priv, EMAC_MULTICAST_ADD,
+					       (u8 *) ha->addr);
+			}
+		} else {
+			mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST);
+			emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
+		}
+	}
+	/* Set mbp config register */
+	emac_write(EMAC_RXMBPENABLE, mbp_enable);
+}
+
+/*************************************************************************
+ *  EMAC Hardware manipulation
+ *************************************************************************/
+
+/**
+ * emac_int_disable - Disable EMAC module interrupt (from adapter)
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Disable EMAC interrupt on the adapter
+ *
+ */
+static void emac_int_disable(struct emac_priv *priv)
+{
+	if (priv->version == EMAC_VERSION_2) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+
+		/* Program C0_Int_En to zero to turn off
+		* interrupts to the CPU */
+		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0);
+		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0);
+		/* NOTE: Rx Threshold and Misc interrupts are not disabled */
+		if (priv->int_disable)
+			priv->int_disable();
+
+		/* NOTE: Rx Threshold and Misc interrupts are not enabled */
+
+		/* ack rxen only then a new pulse will be generated */
+		emac_write(EMAC_DM646X_MACEOIVECTOR,
+			EMAC_DM646X_MAC_EOI_C0_RXEN);
+
+		/* ack txen- only then a new pulse will be generated */
+		emac_write(EMAC_DM646X_MACEOIVECTOR,
+			EMAC_DM646X_MAC_EOI_C0_TXEN);
+
+		local_irq_restore(flags);
+
+	} else {
+		/* Set DM644x control registers for interrupt control */
+		emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0);
+	}
+}
+
+/**
+ * emac_int_enable - Enable EMAC module interrupt (from adapter)
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Enable EMAC interrupt on the adapter
+ *
+ */
+static void emac_int_enable(struct emac_priv *priv)
+{
+	if (priv->version == EMAC_VERSION_2) {
+		if (priv->int_enable)
+			priv->int_enable();
+
+		emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff);
+		emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff);
+
+		/* In addition to turning on interrupt Enable, we need
+		 * ack by writing appropriate values to the EOI
+		 * register */
+
+		/* NOTE: Rx Threshold and Misc interrupts are not enabled */
+	} else {
+		/* Set DM644x control registers for interrupt control */
+		emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1);
+	}
+}
+
+/**
+ * emac_irq - EMAC interrupt handler
+ * @irq: interrupt number
+ * @dev_id: EMAC network adapter data structure ptr
+ *
+ * EMAC Interrupt handler - we only schedule NAPI and not process any packets
+ * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function
+ *
+ * Returns interrupt handled condition
+ */
+static irqreturn_t emac_irq(int irq, void *dev_id)
+{
+	struct net_device *ndev = (struct net_device *)dev_id;
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	++priv->isr_count;
+	if (likely(netif_running(priv->ndev))) {
+		emac_int_disable(priv);
+		napi_schedule(&priv->napi);
+	} else {
+		/* we are closing down, so dont process anything */
+	}
+	return IRQ_HANDLED;
+}
+
+static struct sk_buff *emac_rx_alloc(struct emac_priv *priv)
+{
+	struct sk_buff *skb = netdev_alloc_skb(priv->ndev, priv->rx_buf_size);
+	if (WARN_ON(!skb))
+		return NULL;
+	skb_reserve(skb, NET_IP_ALIGN);
+	return skb;
+}
+
+static void emac_rx_handler(void *token, int len, int status)
+{
+	struct sk_buff		*skb = token;
+	struct net_device	*ndev = skb->dev;
+	struct emac_priv	*priv = netdev_priv(ndev);
+	struct device		*emac_dev = &ndev->dev;
+	int			ret;
+
+	/* free and bail if we are shutting down */
+	if (unlikely(!netif_running(ndev))) {
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/* recycle on receive error */
+	if (status < 0) {
+		ndev->stats.rx_errors++;
+		goto recycle;
+	}
+
+	/* feed received packet up the stack */
+	skb_put(skb, len);
+	skb->protocol = eth_type_trans(skb, ndev);
+	netif_receive_skb(skb);
+	ndev->stats.rx_bytes += len;
+	ndev->stats.rx_packets++;
+
+	/* alloc a new packet for receive */
+	skb = emac_rx_alloc(priv);
+	if (!skb) {
+		if (netif_msg_rx_err(priv) && net_ratelimit())
+			dev_err(emac_dev, "failed rx buffer alloc\n");
+		return;
+	}
+
+recycle:
+	ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
+			skb_tailroom(skb), 0);
+
+	WARN_ON(ret == -ENOMEM);
+	if (unlikely(ret < 0))
+		dev_kfree_skb_any(skb);
+}
+
+static void emac_tx_handler(void *token, int len, int status)
+{
+	struct sk_buff		*skb = token;
+	struct net_device	*ndev = skb->dev;
+
+	/* Check whether the queue is stopped due to stalled tx dma, if the
+	 * queue is stopped then start the queue as we have free desc for tx
+	 */
+	if (unlikely(netif_queue_stopped(ndev)))
+		netif_wake_queue(ndev);
+	ndev->stats.tx_packets++;
+	ndev->stats.tx_bytes += len;
+	dev_kfree_skb_any(skb);
+}
+
+/**
+ * emac_dev_xmit - EMAC Transmit function
+ * @skb: SKB pointer
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called by the system to transmit a packet  - we queue the packet in
+ * EMAC hardware transmit queue
+ *
+ * Returns success(NETDEV_TX_OK) or error code (typically out of desc's)
+ */
+static netdev_tx_t emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct device *emac_dev = &ndev->dev;
+	int ret_code;
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	/* If no link, return */
+	if (unlikely(!priv->link)) {
+		if (netif_msg_tx_err(priv) && net_ratelimit())
+			dev_err(emac_dev, "DaVinci EMAC: No link to transmit");
+		goto fail_tx;
+	}
+
+	ret_code = skb_put_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE);
+	if (unlikely(ret_code < 0)) {
+		if (netif_msg_tx_err(priv) && net_ratelimit())
+			dev_err(emac_dev, "DaVinci EMAC: packet pad failed");
+		goto fail_tx;
+	}
+
+	skb_tx_timestamp(skb);
+
+	ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len,
+				     0);
+	if (unlikely(ret_code != 0)) {
+		if (netif_msg_tx_err(priv) && net_ratelimit())
+			dev_err(emac_dev, "DaVinci EMAC: desc submit failed");
+		goto fail_tx;
+	}
+
+	/* If there is no more tx desc left free then we need to
+	 * tell the kernel to stop sending us tx frames.
+	 */
+	if (unlikely(!cpdma_check_free_tx_desc(priv->txchan)))
+		netif_stop_queue(ndev);
+
+	return NETDEV_TX_OK;
+
+fail_tx:
+	ndev->stats.tx_dropped++;
+	netif_stop_queue(ndev);
+	return NETDEV_TX_BUSY;
+}
+
+/**
+ * emac_dev_tx_timeout - EMAC Transmit timeout function
+ * @ndev: The DaVinci EMAC network adapter
+ * @txqueue: the index of the hung transmit queue
+ *
+ * Called when system detects that a skb timeout period has expired
+ * potentially due to a fault in the adapter in not being able to send
+ * it out on the wire. We teardown the TX channel assuming a hardware
+ * error and re-initialize the TX channel for hardware operation
+ *
+ */
+static void emac_dev_tx_timeout(struct net_device *ndev, unsigned int txqueue)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct device *emac_dev = &ndev->dev;
+
+	if (netif_msg_tx_err(priv))
+		dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX");
+
+	ndev->stats.tx_errors++;
+	emac_int_disable(priv);
+	cpdma_chan_stop(priv->txchan);
+	cpdma_chan_start(priv->txchan);
+	emac_int_enable(priv);
+}
+
+/**
+ * emac_set_type0addr - Set EMAC Type0 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set Type0 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+	u32 val;
+	val = ((mac_addr[5] << 8) | (mac_addr[4]));
+	emac_write(EMAC_MACSRCADDRLO, val);
+
+	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+	       (mac_addr[1] << 8) | (mac_addr[0]));
+	emac_write(EMAC_MACSRCADDRHI, val);
+	val = emac_read(EMAC_RXUNICASTSET);
+	val |= BIT(ch);
+	emac_write(EMAC_RXUNICASTSET, val);
+	val = emac_read(EMAC_RXUNICASTCLEAR);
+	val &= ~BIT(ch);
+	emac_write(EMAC_RXUNICASTCLEAR, val);
+}
+
+/**
+ * emac_set_type1addr - Set EMAC Type1 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set Type1 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+	u32 val;
+	emac_write(EMAC_MACINDEX, ch);
+	val = ((mac_addr[5] << 8) | mac_addr[4]);
+	emac_write(EMAC_MACADDRLO, val);
+	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+	       (mac_addr[1] << 8) | (mac_addr[0]));
+	emac_write(EMAC_MACADDRHI, val);
+	emac_set_type0addr(priv, ch, mac_addr);
+}
+
+/**
+ * emac_set_type2addr - Set EMAC Type2 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ * @index: index into RX address entries
+ * @match: match parameter for RX address matching logic
+ *
+ * Called internally to set Type2 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type2addr(struct emac_priv *priv, u32 ch,
+			       char *mac_addr, int index, int match)
+{
+	u32 val;
+	emac_write(EMAC_MACINDEX, index);
+	val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+	       (mac_addr[1] << 8) | (mac_addr[0]));
+	emac_write(EMAC_MACADDRHI, val);
+	val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \
+	       (match << 19) | BIT(20));
+	emac_write(EMAC_MACADDRLO, val);
+	emac_set_type0addr(priv, ch, mac_addr);
+}
+
+/**
+ * emac_setmac - Set mac address in the adapter (internal function)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set the mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+	struct device *emac_dev = &priv->ndev->dev;
+
+	if (priv->rx_addr_type == 0) {
+		emac_set_type0addr(priv, ch, mac_addr);
+	} else if (priv->rx_addr_type == 1) {
+		u32 cnt;
+		for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++)
+			emac_set_type1addr(priv, ch, mac_addr);
+	} else if (priv->rx_addr_type == 2) {
+		emac_set_type2addr(priv, ch, mac_addr, ch, 1);
+		emac_set_type0addr(priv, ch, mac_addr);
+	} else {
+		if (netif_msg_drv(priv))
+			dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n");
+	}
+}
+
+/**
+ * emac_dev_setmac_addr - Set mac address in the adapter
+ * @ndev: The DaVinci EMAC network adapter
+ * @addr: MAC address to set in device
+ *
+ * Called by the system to set the mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static int emac_dev_setmac_addr(struct net_device *ndev, void *addr)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct device *emac_dev = &priv->ndev->dev;
+	struct sockaddr *sa = addr;
+
+	if (!is_valid_ether_addr(sa->sa_data))
+		return -EADDRNOTAVAIL;
+
+	/* Store mac addr in priv and rx channel and set it in EMAC hw */
+	memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
+	eth_hw_addr_set(ndev, sa->sa_data);
+
+	/* MAC address is configured only after the interface is enabled. */
+	if (netif_running(ndev)) {
+		emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr);
+	}
+
+	if (netif_msg_drv(priv))
+		dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
+					priv->mac_addr);
+
+	return 0;
+}
+
+/**
+ * emac_hw_enable - Enable EMAC hardware for packet transmission/reception
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Enables EMAC hardware for packet processing - enables PHY, enables RX
+ * for packet reception and enables device interrupts and then NAPI
+ *
+ * Returns success (0) or appropriate error code (none right now)
+ */
+static int emac_hw_enable(struct emac_priv *priv)
+{
+	u32 val, mbp_enable, mac_control;
+
+	/* Soft reset */
+	emac_write(EMAC_SOFTRESET, 1);
+	while (emac_read(EMAC_SOFTRESET))
+		cpu_relax();
+
+	/* Disable interrupt & Set pacing for more interrupts initially */
+	emac_int_disable(priv);
+
+	/* Full duplex enable bit set when auto negotiation happens */
+	mac_control =
+		(((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) |
+		((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) |
+		((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) |
+		((priv->duplex == DUPLEX_FULL) ? 0x1 : 0));
+	emac_write(EMAC_MACCONTROL, mac_control);
+
+	mbp_enable =
+		(((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) |
+		((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) |
+		 ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) |
+		 ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) |
+		 ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \
+			EMAC_RXMBP_PROMCH_SHIFT) |
+		 ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) |
+		 ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \
+			EMAC_RXMBP_BROADCH_SHIFT) |
+		 ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) |
+		 ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \
+			EMAC_RXMBP_MULTICH_SHIFT));
+	emac_write(EMAC_RXMBPENABLE, mbp_enable);
+	emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE &
+				   EMAC_RX_MAX_LEN_MASK));
+	emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET &
+					 EMAC_RX_BUFFER_OFFSET_MASK));
+	emac_write(EMAC_RXFILTERLOWTHRESH, 0);
+	emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL);
+	priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF;
+
+	emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL);
+
+	emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr);
+
+	/* Enable MII */
+	val = emac_read(EMAC_MACCONTROL);
+	val |= (EMAC_MACCONTROL_GMIIEN);
+	emac_write(EMAC_MACCONTROL, val);
+
+	/* Enable NAPI and interrupts */
+	napi_enable(&priv->napi);
+	emac_int_enable(priv);
+	return 0;
+
+}
+
+/**
+ * emac_poll - EMAC NAPI Poll function
+ * @napi: pointer to the napi_struct containing The DaVinci EMAC network adapter
+ * @budget: Number of receive packets to process (as told by NAPI layer)
+ *
+ * NAPI Poll function implemented to process packets as per budget. We check
+ * the type of interrupt on the device and accordingly call the TX or RX
+ * packet processing functions. We follow the budget for RX processing and
+ * also put a cap on number of TX pkts processed through config param. The
+ * NAPI schedule function is called if more packets pending.
+ *
+ * Returns number of packets received (in most cases; else TX pkts - rarely)
+ */
+static int emac_poll(struct napi_struct *napi, int budget)
+{
+	unsigned int mask;
+	struct emac_priv *priv = container_of(napi, struct emac_priv, napi);
+	struct net_device *ndev = priv->ndev;
+	struct device *emac_dev = &ndev->dev;
+	u32 status = 0;
+	u32 num_rx_pkts = 0;
+
+	/* Check interrupt vectors and call packet processing */
+	status = emac_read(EMAC_MACINVECTOR);
+
+	mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC;
+
+	if (priv->version == EMAC_VERSION_2)
+		mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC;
+
+	if (status & mask) {
+		cpdma_chan_process(priv->txchan, EMAC_DEF_TX_MAX_SERVICE);
+	} /* TX processing */
+
+	mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC;
+
+	if (priv->version == EMAC_VERSION_2)
+		mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC;
+
+	if (status & mask) {
+		num_rx_pkts = cpdma_chan_process(priv->rxchan, budget);
+	} /* RX processing */
+
+	mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT;
+	if (priv->version == EMAC_VERSION_2)
+		mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT;
+
+	if (unlikely(status & mask)) {
+		u32 ch, cause;
+		dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n");
+		netif_stop_queue(ndev);
+		napi_disable(&priv->napi);
+
+		status = emac_read(EMAC_MACSTATUS);
+		cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >>
+			 EMAC_MACSTATUS_TXERRCODE_SHIFT);
+		if (cause) {
+			ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >>
+			      EMAC_MACSTATUS_TXERRCH_SHIFT);
+			if (net_ratelimit()) {
+				dev_err(emac_dev, "TX Host error %s on ch=%d\n",
+					&emac_txhost_errcodes[cause][0], ch);
+			}
+		}
+		cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >>
+			 EMAC_MACSTATUS_RXERRCODE_SHIFT);
+		if (cause) {
+			ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >>
+			      EMAC_MACSTATUS_RXERRCH_SHIFT);
+			if (netif_msg_hw(priv) && net_ratelimit())
+				dev_err(emac_dev, "RX Host error %s on ch=%d\n",
+					&emac_rxhost_errcodes[cause][0], ch);
+		}
+	} else if (num_rx_pkts < budget) {
+		napi_complete_done(napi, num_rx_pkts);
+		emac_int_enable(priv);
+	}
+
+	return num_rx_pkts;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * emac_poll_controller - EMAC Poll controller function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Polled functionality used by netconsole and others in non interrupt mode
+ *
+ */
+static void emac_poll_controller(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+
+	emac_int_disable(priv);
+	emac_irq(ndev->irq, ndev);
+	emac_int_enable(priv);
+}
+#endif
+
+static void emac_adjust_link(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct phy_device *phydev = ndev->phydev;
+	unsigned long flags;
+	int new_state = 0;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (phydev->link) {
+		/* check the mode of operation - full/half duplex */
+		if (phydev->duplex != priv->duplex) {
+			new_state = 1;
+			priv->duplex = phydev->duplex;
+		}
+		if (phydev->speed != priv->speed) {
+			new_state = 1;
+			priv->speed = phydev->speed;
+		}
+		if (!priv->link) {
+			new_state = 1;
+			priv->link = 1;
+		}
+
+	} else if (priv->link) {
+		new_state = 1;
+		priv->link = 0;
+		priv->speed = 0;
+		priv->duplex = ~0;
+	}
+	if (new_state) {
+		emac_update_phystatus(priv);
+		phy_print_status(ndev->phydev);
+	}
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+/*************************************************************************
+ *  Linux Driver Model
+ *************************************************************************/
+
+/**
+ * emac_devioctl - EMAC adapter ioctl
+ * @ndev: The DaVinci EMAC network adapter
+ * @ifrq: request parameter
+ * @cmd: command parameter
+ *
+ * EMAC driver ioctl function
+ *
+ * Returns success(0) or appropriate error code
+ */
+static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd)
+{
+	if (!(netif_running(ndev)))
+		return -EINVAL;
+
+	/* TODO: Add phy read and write and private statistics get feature */
+
+	if (ndev->phydev)
+		return phy_mii_ioctl(ndev->phydev, ifrq, cmd);
+	else
+		return -EOPNOTSUPP;
+}
+
+static int match_first_device(struct device *dev, const void *data)
+{
+	if (dev->parent && dev->parent->of_node)
+		return of_device_is_compatible(dev->parent->of_node,
+					       "ti,davinci_mdio");
+
+	return !strncmp(dev_name(dev), "davinci_mdio", 12);
+}
+
+/**
+ * emac_dev_open - EMAC device open
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to start the interface. We init TX/RX channels
+ * and enable the hardware for packet reception/transmission and start the
+ * network queue.
+ *
+ * Returns 0 for a successful open, or appropriate error code
+ */
+static int emac_dev_open(struct net_device *ndev)
+{
+	struct device *emac_dev = &ndev->dev;
+	struct resource *res;
+	int q, m, ret;
+	int res_num = 0, irq_num = 0;
+	int i = 0;
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct phy_device *phydev = NULL;
+	struct device *phy = NULL;
+
+	ret = pm_runtime_resume_and_get(&priv->pdev->dev);
+	if (ret < 0) {
+		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
+	netif_carrier_off(ndev);
+	eth_hw_addr_set(ndev, priv->mac_addr);
+
+	/* Configuration items */
+	priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN;
+
+	priv->mac_hash1 = 0;
+	priv->mac_hash2 = 0;
+	emac_write(EMAC_MACHASH1, 0);
+	emac_write(EMAC_MACHASH2, 0);
+
+	for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) {
+		struct sk_buff *skb = emac_rx_alloc(priv);
+
+		if (!skb)
+			break;
+
+		ret = cpdma_chan_idle_submit(priv->rxchan, skb, skb->data,
+					     skb_tailroom(skb), 0);
+		if (WARN_ON(ret < 0))
+			break;
+	}
+
+	/* Request IRQ */
+	if (dev_of_node(&priv->pdev->dev)) {
+		while ((ret = platform_get_irq_optional(priv->pdev, res_num)) != -ENXIO) {
+			if (ret < 0)
+				goto rollback;
+
+			ret = request_irq(ret, emac_irq, 0, ndev->name, ndev);
+			if (ret) {
+				dev_err(emac_dev, "DaVinci EMAC: request_irq() failed\n");
+				goto rollback;
+			}
+			res_num++;
+		}
+	} else {
+		while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, res_num))) {
+			for (irq_num = res->start; irq_num <= res->end; irq_num++) {
+				ret = request_irq(irq_num, emac_irq, 0, ndev->name, ndev);
+				if (ret) {
+					dev_err(emac_dev, "DaVinci EMAC: request_irq() failed\n");
+					goto rollback;
+				}
+			}
+			res_num++;
+		}
+		/* prepare counters for rollback in case of an error */
+		res_num--;
+		irq_num--;
+	}
+
+	/* Start/Enable EMAC hardware */
+	emac_hw_enable(priv);
+
+	/* Enable Interrupt pacing if configured */
+	if (priv->coal_intvl != 0) {
+		struct ethtool_coalesce coal;
+
+		coal.rx_coalesce_usecs = (priv->coal_intvl << 4);
+		emac_set_coalesce(ndev, &coal, NULL, NULL);
+	}
+
+	cpdma_ctlr_start(priv->dma);
+
+	if (priv->phy_node) {
+		phydev = of_phy_connect(ndev, priv->phy_node,
+					&emac_adjust_link, 0, 0);
+		if (!phydev) {
+			dev_err(emac_dev, "could not connect to phy %pOF\n",
+				priv->phy_node);
+			ret = -ENODEV;
+			goto err;
+		}
+	}
+
+	/* use the first phy on the bus if pdata did not give us a phy id */
+	if (!phydev && !priv->phy_id) {
+		/* NOTE: we can't use bus_find_device_by_name() here because
+		 * the device name is not guaranteed to be 'davinci_mdio'. On
+		 * some systems it can be 'davinci_mdio.0' so we need to use
+		 * strncmp() against the first part of the string to correctly
+		 * match it.
+		 */
+		phy = bus_find_device(&mdio_bus_type, NULL, NULL,
+				      match_first_device);
+		if (phy) {
+			priv->phy_id = dev_name(phy);
+			if (!priv->phy_id || !*priv->phy_id)
+				put_device(phy);
+		}
+	}
+
+	if (!phydev && priv->phy_id && *priv->phy_id) {
+		phydev = phy_connect(ndev, priv->phy_id,
+				     &emac_adjust_link,
+				     PHY_INTERFACE_MODE_MII);
+		put_device(phy);	/* reference taken by bus_find_device */
+		if (IS_ERR(phydev)) {
+			dev_err(emac_dev, "could not connect to phy %s\n",
+				priv->phy_id);
+			ret = PTR_ERR(phydev);
+			goto err;
+		}
+
+		priv->link = 0;
+		priv->speed = 0;
+		priv->duplex = ~0;
+
+		phy_attached_info(phydev);
+	}
+
+	if (!phydev) {
+		/* No PHY , fix the link, speed and duplex settings */
+		dev_notice(emac_dev, "no phy, defaulting to 100/full\n");
+		priv->link = 1;
+		priv->speed = SPEED_100;
+		priv->duplex = DUPLEX_FULL;
+		emac_update_phystatus(priv);
+	}
+
+	if (netif_msg_drv(priv))
+		dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name);
+
+	if (phydev)
+		phy_start(phydev);
+
+	return 0;
+
+err:
+	emac_int_disable(priv);
+	napi_disable(&priv->napi);
+
+rollback:
+	if (dev_of_node(&priv->pdev->dev)) {
+		for (q = res_num - 1; q >= 0; q--) {
+			irq_num = platform_get_irq(priv->pdev, q);
+			if (irq_num > 0)
+				free_irq(irq_num, ndev);
+		}
+	} else {
+		for (q = res_num; q >= 0; q--) {
+			res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, q);
+			/* at the first iteration, irq_num is already set to the
+			 * right value
+			 */
+			if (q != res_num)
+				irq_num = res->end;
+
+			for (m = irq_num; m >= res->start; m--)
+				free_irq(m, ndev);
+		}
+	}
+	cpdma_ctlr_stop(priv->dma);
+	pm_runtime_put(&priv->pdev->dev);
+	return ret;
+}
+
+/**
+ * emac_dev_stop - EMAC device stop
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to stop or down the interface. We stop the network
+ * queue, disable interrupts and cleanup TX/RX channels.
+ *
+ * We return the statistics in net_device_stats structure pulled from emac
+ */
+static int emac_dev_stop(struct net_device *ndev)
+{
+	struct resource *res;
+	int i = 0;
+	int irq_num;
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct device *emac_dev = &ndev->dev;
+	int ret = 0;
+
+	/* inform the upper layers. */
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+
+	netif_carrier_off(ndev);
+	emac_int_disable(priv);
+	cpdma_ctlr_stop(priv->dma);
+	emac_write(EMAC_SOFTRESET, 1);
+
+	if (ndev->phydev)
+		phy_disconnect(ndev->phydev);
+
+	/* Free IRQ */
+	if (dev_of_node(&priv->pdev->dev)) {
+		do {
+			ret = platform_get_irq_optional(priv->pdev, i);
+			if (ret < 0 && ret != -ENXIO)
+				break;
+			if (ret > 0) {
+				free_irq(ret, priv->ndev);
+			} else {
+				ret = 0;
+				break;
+			}
+		} while (++i);
+	} else {
+		while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) {
+			for (irq_num = res->start; irq_num <= res->end; irq_num++)
+				free_irq(irq_num, priv->ndev);
+			i++;
+		}
+	}
+
+	if (netif_msg_drv(priv))
+		dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name);
+
+	pm_runtime_put(&priv->pdev->dev);
+	return ret;
+}
+
+/**
+ * emac_dev_getnetstats - EMAC get statistics function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to get statistics from the device.
+ *
+ * We return the statistics in net_device_stats structure pulled from emac
+ */
+static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
+{
+	struct emac_priv *priv = netdev_priv(ndev);
+	u32 mac_control;
+	u32 stats_clear_mask;
+	int err;
+
+	err = pm_runtime_resume_and_get(&priv->pdev->dev);
+	if (err < 0) {
+		dev_err(&priv->pdev->dev, "%s: failed to get_sync(%d)\n",
+			__func__, err);
+		return &ndev->stats;
+	}
+
+	/* update emac hardware stats and reset the registers*/
+
+	mac_control = emac_read(EMAC_MACCONTROL);
+
+	if (mac_control & EMAC_MACCONTROL_GMIIEN)
+		stats_clear_mask = EMAC_STATS_CLR_MASK;
+	else
+		stats_clear_mask = 0;
+
+	ndev->stats.multicast += emac_read(EMAC_RXMCASTFRAMES);
+	emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask);
+
+	ndev->stats.collisions += (emac_read(EMAC_TXCOLLISION) +
+					   emac_read(EMAC_TXSINGLECOLL) +
+					   emac_read(EMAC_TXMULTICOLL));
+	emac_write(EMAC_TXCOLLISION, stats_clear_mask);
+	emac_write(EMAC_TXSINGLECOLL, stats_clear_mask);
+	emac_write(EMAC_TXMULTICOLL, stats_clear_mask);
+
+	ndev->stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) +
+						emac_read(EMAC_RXJABBER) +
+						emac_read(EMAC_RXUNDERSIZED));
+	emac_write(EMAC_RXOVERSIZED, stats_clear_mask);
+	emac_write(EMAC_RXJABBER, stats_clear_mask);
+	emac_write(EMAC_RXUNDERSIZED, stats_clear_mask);
+
+	ndev->stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) +
+					       emac_read(EMAC_RXMOFOVERRUNS));
+	emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask);
+	emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask);
+
+	ndev->stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS);
+	emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask);
+
+	ndev->stats.tx_carrier_errors +=
+		emac_read(EMAC_TXCARRIERSENSE);
+	emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask);
+
+	ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN);
+	emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
+
+	pm_runtime_put(&priv->pdev->dev);
+
+	return &ndev->stats;
+}
+
+static const struct net_device_ops emac_netdev_ops = {
+	.ndo_open		= emac_dev_open,
+	.ndo_stop		= emac_dev_stop,
+	.ndo_start_xmit		= emac_dev_xmit,
+	.ndo_set_rx_mode	= emac_dev_mcast_set,
+	.ndo_set_mac_address	= emac_dev_setmac_addr,
+	.ndo_eth_ioctl		= emac_devioctl,
+	.ndo_tx_timeout		= emac_dev_tx_timeout,
+	.ndo_get_stats		= emac_dev_getnetstats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= emac_poll_controller,
+#endif
+};
+
+static const struct of_device_id davinci_emac_of_match[];
+
+static struct emac_platform_data *
+davinci_emac_of_get_pdata(struct platform_device *pdev, struct emac_priv *priv)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	const struct emac_platform_data *auxdata;
+	struct emac_platform_data *pdata = NULL;
+
+	if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
+		return dev_get_platdata(&pdev->dev);
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	np = pdev->dev.of_node;
+	pdata->version = EMAC_VERSION_2;
+
+	if (!is_valid_ether_addr(pdata->mac_addr))
+		of_get_mac_address(np, pdata->mac_addr);
+
+	of_property_read_u32(np, "ti,davinci-ctrl-reg-offset",
+			     &pdata->ctrl_reg_offset);
+
+	of_property_read_u32(np, "ti,davinci-ctrl-mod-reg-offset",
+			     &pdata->ctrl_mod_reg_offset);
+
+	of_property_read_u32(np, "ti,davinci-ctrl-ram-offset",
+			     &pdata->ctrl_ram_offset);
+
+	of_property_read_u32(np, "ti,davinci-ctrl-ram-size",
+			     &pdata->ctrl_ram_size);
+
+	of_property_read_u8(np, "ti,davinci-rmii-en", &pdata->rmii_en);
+
+	pdata->no_bd_ram = of_property_read_bool(np, "ti,davinci-no-bd-ram");
+
+	priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
+	if (!priv->phy_node) {
+		if (!of_phy_is_fixed_link(np))
+			pdata->phy_id = NULL;
+		else if (of_phy_register_fixed_link(np) >= 0)
+			priv->phy_node = of_node_get(np);
+	}
+
+	auxdata = pdev->dev.platform_data;
+	if (auxdata) {
+		pdata->interrupt_enable = auxdata->interrupt_enable;
+		pdata->interrupt_disable = auxdata->interrupt_disable;
+	}
+
+	match = of_match_device(davinci_emac_of_match, &pdev->dev);
+	if (match && match->data) {
+		auxdata = match->data;
+		pdata->version = auxdata->version;
+		pdata->hw_ram_addr = auxdata->hw_ram_addr;
+	}
+
+	return  pdata;
+}
+
+static int davinci_emac_try_get_mac(struct platform_device *pdev,
+				    int instance, u8 *mac_addr)
+{
+	if (!pdev->dev.of_node)
+		return -EINVAL;
+
+	return ti_cm_get_macid(&pdev->dev, instance, mac_addr);
+}
+
+/**
+ * davinci_emac_probe - EMAC device probe
+ * @pdev: The DaVinci EMAC device that we are removing
+ *
+ * Called when probing for emac devicesr. We get details of instances and
+ * resource information from platform init and register a network device
+ * and allocate resources necessary for driver to perform
+ */
+static int davinci_emac_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int rc = 0;
+	struct resource *res, *res_ctrl;
+	struct net_device *ndev;
+	struct emac_priv *priv;
+	unsigned long hw_ram_addr;
+	struct emac_platform_data *pdata;
+	struct cpdma_params dma_params;
+	struct clk *emac_clk;
+	unsigned long emac_bus_frequency;
+
+
+	/* obtain emac clock from kernel */
+	emac_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(emac_clk)) {
+		dev_err(&pdev->dev, "failed to get EMAC clock\n");
+		return -EBUSY;
+	}
+	emac_bus_frequency = clk_get_rate(emac_clk);
+	devm_clk_put(&pdev->dev, emac_clk);
+
+	/* TODO: Probe PHY here if possible */
+
+	ndev = alloc_etherdev(sizeof(struct emac_priv));
+	if (!ndev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ndev);
+	priv = netdev_priv(ndev);
+	priv->pdev = pdev;
+	priv->ndev = ndev;
+	priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG);
+
+	spin_lock_init(&priv->lock);
+
+	pdata = davinci_emac_of_get_pdata(pdev, priv);
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data\n");
+		rc = -ENODEV;
+		goto err_free_netdev;
+	}
+
+	/* MAC addr and PHY mask , RMII enable info from platform_data */
+	memcpy(priv->mac_addr, pdata->mac_addr, ETH_ALEN);
+	priv->phy_id = pdata->phy_id;
+	priv->rmii_en = pdata->rmii_en;
+	priv->version = pdata->version;
+	priv->int_enable = pdata->interrupt_enable;
+	priv->int_disable = pdata->interrupt_disable;
+
+	priv->coal_intvl = 0;
+	priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000);
+
+	/* Get EMAC platform data */
+	priv->remap_addr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->remap_addr)) {
+		rc = PTR_ERR(priv->remap_addr);
+		goto no_pdata;
+	}
+	priv->emac_base_phys = res->start + pdata->ctrl_reg_offset;
+
+	res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res_ctrl) {
+		priv->ctrl_base =
+			devm_ioremap_resource(&pdev->dev, res_ctrl);
+		if (IS_ERR(priv->ctrl_base)) {
+			rc = PTR_ERR(priv->ctrl_base);
+			goto no_pdata;
+		}
+	} else {
+		priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
+	}
+
+	priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset;
+	ndev->base_addr = (unsigned long)priv->remap_addr;
+
+	hw_ram_addr = pdata->hw_ram_addr;
+	if (!hw_ram_addr)
+		hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset;
+
+	memset(&dma_params, 0, sizeof(dma_params));
+	dma_params.dev			= &pdev->dev;
+	dma_params.dmaregs		= priv->emac_base;
+	dma_params.rxthresh		= priv->emac_base + 0x120;
+	dma_params.rxfree		= priv->emac_base + 0x140;
+	dma_params.txhdp		= priv->emac_base + 0x600;
+	dma_params.rxhdp		= priv->emac_base + 0x620;
+	dma_params.txcp			= priv->emac_base + 0x640;
+	dma_params.rxcp			= priv->emac_base + 0x660;
+	dma_params.num_chan		= EMAC_MAX_TXRX_CHANNELS;
+	dma_params.min_packet_size	= EMAC_DEF_MIN_ETHPKTSIZE;
+	dma_params.desc_hw_addr		= hw_ram_addr;
+	dma_params.desc_mem_size	= pdata->ctrl_ram_size;
+	dma_params.desc_align		= 16;
+
+	dma_params.desc_mem_phys = pdata->no_bd_ram ? 0 :
+			(u32 __force)res->start + pdata->ctrl_ram_offset;
+
+	priv->dma = cpdma_ctlr_create(&dma_params);
+	if (!priv->dma) {
+		dev_err(&pdev->dev, "error initializing DMA\n");
+		rc = -ENOMEM;
+		goto no_pdata;
+	}
+
+	priv->txchan = cpdma_chan_create(priv->dma, EMAC_DEF_TX_CH,
+					 emac_tx_handler, 0);
+	if (IS_ERR(priv->txchan)) {
+		dev_err(&pdev->dev, "error initializing tx dma channel\n");
+		rc = PTR_ERR(priv->txchan);
+		goto err_free_dma;
+	}
+
+	priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH,
+					 emac_rx_handler, 1);
+	if (IS_ERR(priv->rxchan)) {
+		dev_err(&pdev->dev, "error initializing rx dma channel\n");
+		rc = PTR_ERR(priv->rxchan);
+		goto err_free_txchan;
+	}
+
+	rc = platform_get_irq(pdev, 0);
+	if (rc < 0)
+		goto err_free_rxchan;
+	ndev->irq = rc;
+
+	rc = davinci_emac_try_get_mac(pdev, res_ctrl ? 0 : 1, priv->mac_addr);
+	if (!rc)
+		eth_hw_addr_set(ndev, priv->mac_addr);
+
+	if (!is_valid_ether_addr(priv->mac_addr)) {
+		/* Use random MAC if still none obtained. */
+		eth_hw_addr_random(ndev);
+		memcpy(priv->mac_addr, ndev->dev_addr, ndev->addr_len);
+		dev_warn(&pdev->dev, "using random MAC addr: %pM\n",
+			 priv->mac_addr);
+	}
+
+	ndev->netdev_ops = &emac_netdev_ops;
+	ndev->ethtool_ops = &ethtool_ops;
+	netif_napi_add(ndev, &priv->napi, emac_poll);
+
+	pm_runtime_enable(&pdev->dev);
+	rc = pm_runtime_resume_and_get(&pdev->dev);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n",
+			__func__, rc);
+		goto err_napi_del;
+	}
+
+	/* register the network device */
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	rc = register_netdev(ndev);
+	if (rc) {
+		dev_err(&pdev->dev, "error in register_netdev\n");
+		rc = -ENODEV;
+		pm_runtime_put(&pdev->dev);
+		goto err_napi_del;
+	}
+
+
+	if (netif_msg_probe(priv)) {
+		dev_notice(&pdev->dev, "DaVinci EMAC Probe found device "
+			   "(regs: %pa, irq: %d)\n",
+			   &priv->emac_base_phys, ndev->irq);
+	}
+	pm_runtime_put(&pdev->dev);
+
+	return 0;
+
+err_napi_del:
+	netif_napi_del(&priv->napi);
+err_free_rxchan:
+	cpdma_chan_destroy(priv->rxchan);
+err_free_txchan:
+	cpdma_chan_destroy(priv->txchan);
+err_free_dma:
+	cpdma_ctlr_destroy(priv->dma);
+no_pdata:
+	if (of_phy_is_fixed_link(np))
+		of_phy_deregister_fixed_link(np);
+	of_node_put(priv->phy_node);
+err_free_netdev:
+	free_netdev(ndev);
+	return rc;
+}
+
+/**
+ * davinci_emac_remove - EMAC device remove
+ * @pdev: The DaVinci EMAC device that we are removing
+ *
+ * Called when removing the device driver. We disable clock usage and release
+ * the resources taken up by the driver and unregister network device
+ */
+static int davinci_emac_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct emac_priv *priv = netdev_priv(ndev);
+	struct device_node *np = pdev->dev.of_node;
+
+	dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n");
+
+	if (priv->txchan)
+		cpdma_chan_destroy(priv->txchan);
+	if (priv->rxchan)
+		cpdma_chan_destroy(priv->rxchan);
+	cpdma_ctlr_destroy(priv->dma);
+
+	unregister_netdev(ndev);
+	of_node_put(priv->phy_node);
+	pm_runtime_disable(&pdev->dev);
+	if (of_phy_is_fixed_link(np))
+		of_phy_deregister_fixed_link(np);
+	free_netdev(ndev);
+
+	return 0;
+}
+
+static int davinci_emac_suspend(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	if (netif_running(ndev))
+		emac_dev_stop(ndev);
+
+	return 0;
+}
+
+static int davinci_emac_resume(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	if (netif_running(ndev))
+		emac_dev_open(ndev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops davinci_emac_pm_ops = {
+	.suspend	= davinci_emac_suspend,
+	.resume		= davinci_emac_resume,
+};
+
+static const struct emac_platform_data am3517_emac_data = {
+	.version		= EMAC_VERSION_2,
+	.hw_ram_addr		= 0x01e20000,
+};
+
+static const struct emac_platform_data dm816_emac_data = {
+	.version		= EMAC_VERSION_2,
+};
+
+static const struct of_device_id davinci_emac_of_match[] = {
+	{.compatible = "ti,davinci-dm6467-emac", },
+	{.compatible = "ti,am3517-emac", .data = &am3517_emac_data, },
+	{.compatible = "ti,dm816-emac", .data = &dm816_emac_data, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, davinci_emac_of_match);
+
+/* davinci_emac_driver: EMAC platform driver structure */
+static struct platform_driver davinci_emac_driver = {
+	.driver = {
+		.name	 = "davinci_emac",
+		.pm	 = &davinci_emac_pm_ops,
+		.of_match_table = davinci_emac_of_match,
+	},
+	.probe = davinci_emac_probe,
+	.remove = davinci_emac_remove,
+};
+
+/**
+ * davinci_emac_init - EMAC driver module init
+ *
+ * Called when initializing the driver. We register the driver with
+ * the platform.
+ */
+static int __init davinci_emac_init(void)
+{
+	return platform_driver_register(&davinci_emac_driver);
+}
+late_initcall(davinci_emac_init);
+
+/**
+ * davinci_emac_exit - EMAC driver module exit
+ *
+ * Called when exiting the driver completely. We unregister the driver with
+ * the platform and exit
+ */
+static void __exit davinci_emac_exit(void)
+{
+	platform_driver_unregister(&davinci_emac_driver);
+}
+module_exit(davinci_emac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>");
+MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>");
+MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver");