Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 238 insertions, 0 deletions

diff --git a/drivers/net/mdio/mdio-bitbang.c b/drivers/net/mdio/mdio-bitbang.c
new file mode 100644
index 000000000..07609114a
--- /dev/null
+++ b/drivers/net/mdio/mdio-bitbang.c
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Bitbanged MDIO support.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ * Copyright (c) 2007 Freescale Semiconductor
+ *
+ * Based on CPM2 MDIO code which is:
+ *
+ * Copyright (c) 2003 Intracom S.A.
+ *  by Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/mdio-bitbang.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#define MDIO_READ 2
+#define MDIO_WRITE 1
+
+#define MDIO_C45 (1<<15)
+#define MDIO_C45_ADDR (MDIO_C45 | 0)
+#define MDIO_C45_READ (MDIO_C45 | 3)
+#define MDIO_C45_WRITE (MDIO_C45 | 1)
+
+#define MDIO_SETUP_TIME 10
+#define MDIO_HOLD_TIME 10
+
+/* Minimum MDC period is 400 ns, plus some margin for error.  MDIO_DELAY
+ * is done twice per period.
+ */
+#define MDIO_DELAY 250
+
+/* The PHY may take up to 300 ns to produce data, plus some margin
+ * for error.
+ */
+#define MDIO_READ_DELAY 350
+
+/* MDIO must already be configured as output. */
+static void mdiobb_send_bit(struct mdiobb_ctrl *ctrl, int val)
+{
+	const struct mdiobb_ops *ops = ctrl->ops;
+
+	ops->set_mdio_data(ctrl, val);
+	ndelay(MDIO_DELAY);
+	ops->set_mdc(ctrl, 1);
+	ndelay(MDIO_DELAY);
+	ops->set_mdc(ctrl, 0);
+}
+
+/* MDIO must already be configured as input. */
+static int mdiobb_get_bit(struct mdiobb_ctrl *ctrl)
+{
+	const struct mdiobb_ops *ops = ctrl->ops;
+
+	ndelay(MDIO_DELAY);
+	ops->set_mdc(ctrl, 1);
+	ndelay(MDIO_READ_DELAY);
+	ops->set_mdc(ctrl, 0);
+
+	return ops->get_mdio_data(ctrl);
+}
+
+/* MDIO must already be configured as output. */
+static void mdiobb_send_num(struct mdiobb_ctrl *ctrl, u16 val, int bits)
+{
+	int i;
+
+	for (i = bits - 1; i >= 0; i--)
+		mdiobb_send_bit(ctrl, (val >> i) & 1);
+}
+
+/* MDIO must already be configured as input. */
+static u16 mdiobb_get_num(struct mdiobb_ctrl *ctrl, int bits)
+{
+	int i;
+	u16 ret = 0;
+
+	for (i = bits - 1; i >= 0; i--) {
+		ret <<= 1;
+		ret |= mdiobb_get_bit(ctrl);
+	}
+
+	return ret;
+}
+
+/* Utility to send the preamble, address, and
+ * register (common to read and write).
+ */
+static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int op, u8 phy, u8 reg)
+{
+	const struct mdiobb_ops *ops = ctrl->ops;
+	int i;
+
+	ops->set_mdio_dir(ctrl, 1);
+
+	/*
+	 * Send a 32 bit preamble ('1's) with an extra '1' bit for good
+	 * measure.  The IEEE spec says this is a PHY optional
+	 * requirement.  The AMD 79C874 requires one after power up and
+	 * one after a MII communications error.  This means that we are
+	 * doing more preambles than we need, but it is safer and will be
+	 * much more robust.
+	 */
+
+	for (i = 0; i < 32; i++)
+		mdiobb_send_bit(ctrl, 1);
+
+	/* send the start bit (01) and the read opcode (10) or write (01).
+	   Clause 45 operation uses 00 for the start and 11, 10 for
+	   read/write */
+	mdiobb_send_bit(ctrl, 0);
+	if (op & MDIO_C45)
+		mdiobb_send_bit(ctrl, 0);
+	else
+		mdiobb_send_bit(ctrl, 1);
+	mdiobb_send_bit(ctrl, (op >> 1) & 1);
+	mdiobb_send_bit(ctrl, (op >> 0) & 1);
+
+	mdiobb_send_num(ctrl, phy, 5);
+	mdiobb_send_num(ctrl, reg, 5);
+}
+
+/* In clause 45 mode all commands are prefixed by MDIO_ADDR to specify the
+   lower 16 bits of the 21 bit address. This transfer is done identically to a
+   MDIO_WRITE except for a different code. To enable clause 45 mode or
+   MII_ADDR_C45 into the address. Theoretically clause 45 and normal devices
+   can exist on the same bus. Normal devices should ignore the MDIO_ADDR
+   phase. */
+static int mdiobb_cmd_addr(struct mdiobb_ctrl *ctrl, int phy, u32 addr)
+{
+	unsigned int dev_addr = (addr >> 16) & 0x1F;
+	unsigned int reg = addr & 0xFFFF;
+	mdiobb_cmd(ctrl, MDIO_C45_ADDR, phy, dev_addr);
+
+	/* send the turnaround (10) */
+	mdiobb_send_bit(ctrl, 1);
+	mdiobb_send_bit(ctrl, 0);
+
+	mdiobb_send_num(ctrl, reg, 16);
+
+	ctrl->ops->set_mdio_dir(ctrl, 0);
+	mdiobb_get_bit(ctrl);
+
+	return dev_addr;
+}
+
+int mdiobb_read(struct mii_bus *bus, int phy, int reg)
+{
+	struct mdiobb_ctrl *ctrl = bus->priv;
+	int ret, i;
+
+	if (reg & MII_ADDR_C45) {
+		reg = mdiobb_cmd_addr(ctrl, phy, reg);
+		mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
+	} else
+		mdiobb_cmd(ctrl, ctrl->op_c22_read, phy, reg);
+
+	ctrl->ops->set_mdio_dir(ctrl, 0);
+
+	/* check the turnaround bit: the PHY should be driving it to zero, if this
+	 * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
+	 */
+	if (mdiobb_get_bit(ctrl) != 0 &&
+	    !(bus->phy_ignore_ta_mask & (1 << phy))) {
+		/* PHY didn't drive TA low -- flush any bits it
+		 * may be trying to send.
+		 */
+		for (i = 0; i < 32; i++)
+			mdiobb_get_bit(ctrl);
+
+		return 0xffff;
+	}
+
+	ret = mdiobb_get_num(ctrl, 16);
+	mdiobb_get_bit(ctrl);
+	return ret;
+}
+EXPORT_SYMBOL(mdiobb_read);
+
+int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
+{
+	struct mdiobb_ctrl *ctrl = bus->priv;
+
+	if (reg & MII_ADDR_C45) {
+		reg = mdiobb_cmd_addr(ctrl, phy, reg);
+		mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
+	} else
+		mdiobb_cmd(ctrl, ctrl->op_c22_write, phy, reg);
+
+	/* send the turnaround (10) */
+	mdiobb_send_bit(ctrl, 1);
+	mdiobb_send_bit(ctrl, 0);
+
+	mdiobb_send_num(ctrl, val, 16);
+
+	ctrl->ops->set_mdio_dir(ctrl, 0);
+	mdiobb_get_bit(ctrl);
+	return 0;
+}
+EXPORT_SYMBOL(mdiobb_write);
+
+struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
+{
+	struct mii_bus *bus;
+
+	bus = mdiobus_alloc();
+	if (!bus)
+		return NULL;
+
+	__module_get(ctrl->ops->owner);
+
+	bus->read = mdiobb_read;
+	bus->write = mdiobb_write;
+	bus->priv = ctrl;
+	if (!ctrl->override_op_c22) {
+		ctrl->op_c22_read = MDIO_READ;
+		ctrl->op_c22_write = MDIO_WRITE;
+	}
+
+	return bus;
+}
+EXPORT_SYMBOL(alloc_mdio_bitbang);
+
+void free_mdio_bitbang(struct mii_bus *bus)
+{
+	struct mdiobb_ctrl *ctrl = bus->priv;
+
+	module_put(ctrl->ops->owner);
+	mdiobus_free(bus);
+}
+EXPORT_SYMBOL(free_mdio_bitbang);
+
+MODULE_LICENSE("GPL v2");