Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

50 files changed, 54047 insertions, 0 deletions

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
new file mode 100644
index 000000000..4402eedb3
--- /dev/null
+++ b/drivers/net/usb/Kconfig
@@ -0,0 +1,648 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# USB Network devices configuration
+#
+comment "Host-side USB support is needed for USB Network Adapter support"
+	depends on !USB && NET
+
+menuconfig USB_NET_DRIVERS
+	tristate "USB Network Adapters"
+	default USB if USB
+	depends on USB && NET
+
+if USB_NET_DRIVERS
+
+config USB_CATC
+	tristate "USB CATC NetMate-based Ethernet device support"
+	select CRC32
+	help
+	  Say Y if you want to use one of the following 10Mbps USB Ethernet
+	  device based on the EL1210A chip. Supported devices are:
+	  Belkin F5U011
+	  Belkin F5U111
+	  CATC NetMate
+	  CATC NetMate II
+	  smartBridges smartNIC
+
+	  This driver makes the adapter appear as a normal Ethernet interface,
+	  typically on eth0, if it is the only ethernet device, or perhaps on
+	  eth1, if you have a PCI or ISA ethernet card installed.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called catc.
+
+config USB_KAWETH
+	tristate "USB KLSI KL5USB101-based ethernet device support"
+	help
+	  Say Y here if you want to use one of the following 10Mbps only
+	  USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
+	  3Com 3C19250
+	  ADS USB-10BT
+	  ATEN USB Ethernet
+	  ASANTE USB To Ethernet Adapter
+	  AOX Endpoints USB Ethernet
+	  Correga K.K.
+	  D-Link DSB-650C and DU-E10
+	  Entrega / Portgear E45
+	  I-O DATA USB-ET/T
+	  Jaton USB Ethernet Device Adapter
+	  Kingston Technology USB Ethernet Adapter
+	  Linksys USB10T
+	  Mobility USB-Ethernet Adapter
+	  NetGear EA-101
+	  Peracom Enet and Enet2
+	  Portsmith Express Ethernet Adapter
+	  Shark Pocket Adapter
+	  SMC 2202USB
+	  Sony Vaio port extender
+
+	  This driver is likely to work with most 10Mbps only USB Ethernet
+	  adapters, including some "no brand" devices. It does NOT work on
+	  SmartBridges smartNIC or on Belkin F5U111 devices - you should use
+	  the CATC NetMate driver for those. If you are not sure which one
+	  you need, select both, and the correct one should be selected for
+	  you.
+
+	  This driver makes the adapter appear as a normal Ethernet interface,
+	  typically on eth0, if it is the only ethernet device, or perhaps on
+	  eth1, if you have a PCI or ISA ethernet card installed.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kaweth.
+
+config USB_PEGASUS
+	tristate "USB Pegasus/Pegasus-II based ethernet device support"
+	select MII
+	help
+	  Say Y here if you know you have Pegasus or Pegasus-II based adapter.
+	  If in doubt then look at <file:drivers/net/usb/pegasus.h> for the
+	  complete list of supported devices.
+
+	  If your particular adapter is not in the list and you are _sure_ it
+	  is Pegasus or Pegasus II based then send me
+	  <petkan@users.sourceforge.net> vendor and device IDs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pegasus.
+
+config USB_RTL8150
+	tristate "USB RTL8150 based ethernet device support"
+	select MII
+	help
+	  Say Y here if you have RTL8150 based usb-ethernet adapter.
+	  Send me <petkan@users.sourceforge.net> any comments you may have.
+	  You can also check for updates at <http://pegasus2.sourceforge.net/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtl8150.
+
+config USB_RTL8152
+	tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
+	select MII
+	select CRC32
+	select CRYPTO
+	select CRYPTO_HASH
+	select CRYPTO_SHA256
+	help
+	  This option adds support for Realtek RTL8152 based USB 2.0
+	  10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
+	  Ethernet adapters.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called r8152.
+
+config USB_LAN78XX
+	tristate "Microchip LAN78XX Based USB Ethernet Adapters"
+	select MII
+	select PHYLIB
+	select MICROCHIP_PHY
+	select FIXED_PHY
+	select CRC32
+	help
+	  This option adds support for Microchip LAN78XX based USB 2
+	  & USB 3 10/100/1000 Ethernet adapters.
+	  LAN7800 : USB 3 to 10/100/1000 Ethernet adapter
+	  LAN7850 : USB 2 to 10/100/1000 Ethernet adapter
+	  LAN7801 : USB 3 to 10/100/1000 Ethernet adapter (MAC only)
+
+	  Proper PHY driver is required for LAN7801.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lan78xx.
+
+config USB_USBNET
+	tristate "Multi-purpose USB Networking Framework"
+	select MII
+	help
+	  This driver supports several kinds of network links over USB,
+	  with "minidrivers" built around a common network driver core
+	  that supports deep queues for efficient transfers.  (This gives
+	  better performance with small packets and at high speeds).
+
+	  The USB host runs "usbnet", and the other end of the link might be:
+
+	  - Another USB host, when using USB "network" or "data transfer"
+	    cables.  These are often used to network laptops to PCs, like
+	    "Laplink" parallel cables or some motherboards.  These rely
+	    on specialized chips from many suppliers.
+
+	  - An intelligent USB gadget, perhaps embedding a Linux system.
+	    These include PDAs running Linux (iPaq, Yopy, Zaurus, and
+	    others), and devices that interoperate using the standard
+	    CDC-Ethernet specification (including many cable modems).
+
+	  - Network adapter hardware (like those for 10/100 Ethernet) which
+	    uses this driver framework.
+
+	  The link will appear with a name like "usb0", when the link is
+	  a two-node link, or "eth0" for most CDC-Ethernet devices.  Those
+	  two-node links are most easily managed with Ethernet Bridging
+	  (CONFIG_BRIDGE) instead of routing.
+
+	  For more information see <http://www.linux-usb.org/usbnet/>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbnet.
+
+config USB_NET_AX8817X
+	tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
+	depends on USB_USBNET
+	select CRC32
+	select PHYLINK
+	select AX88796B_PHY
+	imply NET_SELFTESTS
+	default y
+	help
+	  This option adds support for ASIX AX88xxx based USB 2.0
+	  10/100 Ethernet adapters.
+
+	  This driver should work with at least the following devices:
+	    * Aten UC210T
+	    * ASIX AX88172
+	    * Billionton Systems, USB2AR
+	    * Billionton Systems, GUSB2AM-1G-B
+	    * Buffalo LUA-U2-KTX
+	    * Corega FEther USB2-TX
+	    * D-Link DUB-E100
+	    * Hawking UF200
+	    * Linksys USB200M
+	    * Netgear FA120
+	    * Sitecom LN-029
+	    * Sitecom LN-028
+	    * Intellinet USB 2.0 Ethernet
+	    * ST Lab USB 2.0 Ethernet
+	    * TrendNet TU2-ET100
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.
+
+config USB_NET_AX88179_178A
+	tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
+	depends on USB_USBNET
+	select CRC32
+	select PHYLIB
+	default y
+	help
+	  This option adds support for ASIX AX88179 based USB 3.0/2.0
+	  to Gigabit Ethernet adapters.
+
+	  This driver should work with at least the following devices:
+	    * ASIX AX88179
+	    * ASIX AX88178A
+	    * Sitcomm LN-032
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.
+
+config USB_NET_CDCETHER
+	tristate "CDC Ethernet support (smart devices such as cable modems)"
+	depends on USB_USBNET
+	default y
+	help
+	  This option supports devices conforming to the Communication Device
+	  Class (CDC) Ethernet Control Model, a specification that's easy to
+	  implement in device firmware.  The CDC specifications are available
+	  from <http://www.usb.org/>.
+
+	  CDC Ethernet is an implementation option for DOCSIS cable modems
+	  that support USB connectivity, used for non-Microsoft USB hosts.
+	  The Linux-USB CDC Ethernet Gadget driver is an open implementation.
+	  This driver should work with at least the following devices:
+
+	    * Dell Wireless 5530 HSPA
+	    * Ericsson PipeRider (all variants)
+	    * Ericsson Mobile Broadband Module (all variants)
+	    * Motorola (DM100 and SB4100)
+	    * Broadcom Cable Modem (reference design)
+	    * Toshiba (PCX1100U and F3507g/F3607gw)
+	    * ...
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.  However, if the
+	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
+	  name is used instead.
+
+config USB_NET_CDC_EEM
+	tristate "CDC EEM support"
+	depends on USB_USBNET
+	help
+	  This option supports devices conforming to the Communication Device
+	  Class (CDC) Ethernet Emulation Model, a specification that's easy to
+	  implement in device firmware.  The CDC EEM specifications are available
+	  from <http://www.usb.org/>.
+
+	  This driver creates an interface named "ethX", where X depends on
+	  what other networking devices you have in use.  However, if the
+	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
+	  name is used instead.
+
+config USB_NET_CDC_NCM
+	tristate "CDC NCM support"
+	depends on USB_USBNET
+	select USB_NET_CDCETHER
+	default y
+	help
+	  This driver provides support for CDC NCM (Network Control Model
+	  Device USB Class Specification). The CDC NCM specification is
+	  available from <http://www.usb.org/>.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module.
+
+	  This driver should work with at least the following devices:
+	    * ST-Ericsson M700 LTE FDD/TDD Mobile Broadband Modem (ref. design)
+	    * ST-Ericsson M5730 HSPA+ Mobile Broadband Modem (reference design)
+	    * ST-Ericsson M570 HSPA+ Mobile Broadband Modem (reference design)
+	    * ST-Ericsson M343 HSPA Mobile Broadband Modem (reference design)
+	    * Ericsson F5521gw Mobile Broadband Module
+
+config USB_NET_HUAWEI_CDC_NCM
+	tristate "Huawei NCM embedded AT channel support"
+	depends on USB_USBNET
+	select USB_WDM
+	select USB_NET_CDC_NCM
+	help
+		This driver supports huawei-style NCM devices, that use NCM as a
+		transport for other protocols, usually an embedded AT channel.
+		Good examples are:
+		* Huawei E3131
+		* Huawei E3251
+
+		To compile this driver as a module, choose M here: the module will be
+		called huawei_cdc_ncm.ko.
+
+config USB_NET_CDC_MBIM
+	tristate "CDC MBIM support"
+	depends on USB_USBNET
+	select USB_WDM
+	select USB_NET_CDC_NCM
+	help
+	  This driver provides support for CDC MBIM (Mobile Broadband
+	  Interface Model) devices. The CDC MBIM specification is
+	  available from <http://www.usb.org/>.
+
+	  MBIM devices require configuration using the management
+	  protocol defined by the MBIM specification.  This driver
+	  provides unfiltered access to the MBIM control channel
+	  through the associated /dev/cdc-wdmx character device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cdc_mbim.
+
+config USB_NET_DM9601
+	tristate "Davicom DM96xx based USB 10/100 ethernet devices"
+	depends on USB_USBNET
+	select CRC32
+	help
+	  This option adds support for Davicom DM9601/DM9620/DM9621A
+	  based USB 10/100 Ethernet adapters.
+
+config USB_NET_SR9700
+	tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
+	depends on USB_USBNET
+	select CRC32
+	help
+	  This option adds support for CoreChip-sz SR9700 based USB 1.1
+	  10/100 Ethernet adapters.
+
+config USB_NET_SR9800
+	tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
+	depends on USB_USBNET
+	select CRC32
+	help
+	  Say Y if you want to use one of the following 100Mbps USB Ethernet
+	  device based on the CoreChip-sz SR9800 chip.
+
+	  This driver makes the adapter appear as a normal Ethernet interface,
+	  typically on eth0, if it is the only ethernet device, or perhaps on
+	  eth1, if you have a PCI or ISA ethernet card installed.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sr9800.
+
+config USB_NET_SMSC75XX
+	tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
+	depends on USB_USBNET
+	select BITREVERSE
+	select CRC16
+	select CRC32
+	help
+	  This option adds support for SMSC LAN75XX based USB 2.0
+	  Gigabit Ethernet adapters.
+
+config USB_NET_SMSC95XX
+	tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
+	depends on USB_USBNET
+	select PHYLIB
+	select SMSC_PHY
+	select BITREVERSE
+	select CRC16
+	select CRC32
+	imply NET_SELFTESTS
+	help
+	  This option adds support for SMSC LAN95XX based USB 2.0
+	  10/100 Ethernet adapters.
+
+config USB_NET_GL620A
+	tristate "GeneSys GL620USB-A based cables"
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a host-to-host cable,
+	  or PC2PC motherboard, with this chip.
+
+	  Note that the half-duplex "GL620USB" is not supported.
+
+config USB_NET_NET1080
+	tristate "NetChip 1080 based cables (Laplink, ...)"
+	default y
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a host-to-host cable based
+	  on this design:  one NetChip 1080 chip and supporting logic,
+	  optionally with LEDs that indicate traffic
+
+config USB_NET_PLUSB
+	tristate "Prolific PL-2301/2302/25A1/27A1 based cables"
+	# if the handshake/init/reset problems, from original 'plusb',
+	# are ever resolved ... then remove "experimental"
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a host-to-host cable
+	  with one of these chips.
+
+config USB_NET_MCS7830
+	tristate "MosChip MCS7830 based Ethernet adapters"
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a 10/100 Ethernet USB2
+	  adapter based on the MosChip 7830 controller. This includes
+	  adapters marketed under the DeLOCK brand.
+
+config USB_NET_RNDIS_HOST
+	tristate "Host for RNDIS and ActiveSync devices"
+	depends on USB_USBNET
+	select USB_NET_CDCETHER
+	help
+	  This option enables hosting "Remote NDIS" USB networking links,
+	  as encouraged by Microsoft (instead of CDC Ethernet!) for use in
+	  various devices that may only support this protocol.  A variant
+	  of this protocol (with even less public documentation) seems to
+	  be at the root of Microsoft's "ActiveSync" too.
+
+	  Avoid using this protocol unless you have no better options.
+	  The protocol specification is incomplete, and is controlled by
+	  (and for) Microsoft; it isn't an "Open" ecosystem or market.
+
+config USB_NET_CDC_SUBSET_ENABLE
+	tristate
+	depends on USB_NET_CDC_SUBSET
+
+config USB_NET_CDC_SUBSET
+	tristate "Simple USB Network Links (CDC Ethernet subset)"
+	depends on USB_USBNET
+	default y
+	help
+	  This driver module supports USB network devices that can work
+	  without any device-specific information.  Select it if you have
+	  one of these drivers.
+
+	  Note that while many USB host-to-host cables can work in this mode,
+	  that may mean not being able to talk to Win32 systems or more
+	  commonly not being able to handle certain events (like replugging
+	  the host on the other end) very well.  Also, these devices will
+	  not generally have permanently assigned Ethernet addresses.
+
+config USB_ALI_M5632
+	bool "ALi M5632 based 'USB 2.0 Data Link' cables"
+	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
+	help
+	  Choose this option if you're using a host-to-host cable
+	  based on this design, which supports USB 2.0 high speed.
+
+config USB_AN2720
+	bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
+	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
+	help
+	  Choose this option if you're using a host-to-host cable
+	  based on this design.  Note that AnchorChips is now a
+	  Cypress brand.
+
+config USB_BELKIN
+	bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
+	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
+	default y
+	help
+	  Choose this option if you're using a host-to-host cable
+	  based on this design:  two NetChip 2890 chips and an Atmel
+	  microcontroller, with LEDs that indicate traffic.
+
+config USB_ARMLINUX
+	bool "Embedded ARM Linux links (iPaq, ...)"
+	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
+	default y
+	help
+	  Choose this option to support the "usb-eth" networking driver
+	  used by most of the ARM Linux community with device controllers
+	  such as the SA-11x0 and PXA-25x UDCs, or the tftp capabilities
+	  in some PXA versions of the "blob" boot loader.
+
+	  Linux-based "Gumstix" PXA-25x based systems use this protocol
+	  to talk with other Linux systems.
+
+	  Although the ROMs shipped with Sharp Zaurus products use a
+	  different link level framing protocol, you can have them use
+	  this simpler protocol by installing a different kernel.
+
+config USB_EPSON2888
+	bool "Epson 2888 based firmware (DEVELOPMENT)"
+	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
+	help
+	  Choose this option to support the usb networking links used
+	  by some sample firmware from Epson.
+
+config USB_KC2190
+	bool "KT Technology KC2190 based cables (InstaNet)"
+	depends on USB_NET_CDC_SUBSET
+	select USB_NET_CDC_SUBSET_ENABLE
+	help
+	  Choose this option if you're using a host-to-host cable
+	  with one of these chips.
+
+config USB_NET_ZAURUS
+	tristate "Sharp Zaurus (stock ROMs) and compatible"
+	depends on USB_USBNET
+	select USB_NET_CDCETHER
+	select CRC32
+	default y
+	help
+	  Choose this option to support the usb networking links used by
+	  Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
+	  This also supports some related device firmware, as used in some
+	  PDAs from Olympus and some cell phones from Motorola.
+
+	  If you install an alternate image, such as the Linux 2.6 based
+	  versions of OpenZaurus, you should no longer need to support this
+	  protocol.  Only the "eth-fd" or "net_fd" drivers in these devices
+	  really need this non-conformant variant of CDC Ethernet (or in
+	  some cases CDC MDLM) protocol, not "g_ether".
+
+config USB_NET_CX82310_ETH
+	tristate "Conexant CX82310 USB ethernet port"
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a Conexant CX82310-based ADSL
+	  router with USB ethernet port. This driver is for routers only,
+	  it will not work with ADSL modems (use cxacru driver instead).
+
+config USB_NET_KALMIA
+	tristate "Samsung Kalmia based LTE USB modem"
+	depends on USB_USBNET
+	help
+	  Choose this option if you have a Samsung Kalmia based USB modem
+	  as Samsung GT-B3730.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kalmia.
+
+config USB_NET_QMI_WWAN
+	tristate "QMI WWAN driver for Qualcomm MSM based 3G and LTE modems"
+	depends on USB_USBNET
+	select USB_WDM
+	help
+	  Support WWAN LTE/3G devices based on Qualcomm Mobile Data Modem
+	  (MDM) chipsets.  Examples of such devices are
+	    * Huawei E392/E398
+
+	  This driver will only drive the ethernet part of the chips.
+	  The devices require additional configuration to be usable.
+	  Multiple management interfaces with linux drivers are
+	  available:
+
+	    * option: AT commands on /dev/ttyUSBx
+	    * cdc-wdm: Qualcomm MSM Interface (QMI) protocol on /dev/cdc-wdmx
+
+	  A modem manager with support for QMI is recommended.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called qmi_wwan.
+
+config USB_HSO
+	tristate "Option USB High Speed Mobile Devices"
+	depends on USB && RFKILL && TTY
+	default n
+	help
+	  Choose this option if you have an Option HSDPA/HSUPA card.
+	  These cards support downlink speeds of 7.2Mbps or greater.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hso.
+
+config USB_NET_INT51X1
+	tristate "Intellon PLC based usb adapter"
+	depends on USB_USBNET
+	help
+	  Choose this option if you're using a 14Mb USB-based PLC
+	  (Powerline Communications) solution with an Intellon
+	  INT51x1/INT5200 chip, like the "devolo dLan duo".
+
+config USB_CDC_PHONET
+	tristate "CDC Phonet support"
+	depends on PHONET && USB_USBNET
+	help
+	  Choose this option to support the Phonet interface to a Nokia
+	  cellular modem, as found on most Nokia handsets with the
+	  "PC suite" USB profile.
+
+config USB_IPHETH
+	tristate "Apple iPhone USB Ethernet driver"
+	default n
+	help
+	  Module used to share Internet connection (tethering) from your
+	  iPhone (Original, 3G and 3GS) to your system.
+	  Note that you need userspace libraries and programs that are needed
+	  to pair your device with your system and that understand the iPhone
+	  protocol.
+
+	  For more information: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver
+
+config USB_SIERRA_NET
+	tristate "USB-to-WWAN Driver for Sierra Wireless modems"
+	depends on USB_USBNET
+	help
+	  Choose this option if you have a Sierra Wireless USB-to-WWAN device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sierra_net.
+
+config USB_VL600
+	tristate "LG VL600 modem dongle"
+	depends on USB_NET_CDCETHER && TTY
+	select USB_ACM
+	help
+	  Select this if you want to use an LG Electronics 4G/LTE usb modem
+	  called VL600.  This driver only handles the ethernet
+	  interface exposed by the modem firmware.  To establish a connection
+	  you will first need a userspace program that sends the right
+	  command to the modem through its CDC ACM port, and most
+	  likely also a DHCP client.  See this thread about using the
+	  4G modem from Verizon:
+
+	  http://ubuntuforums.org/showpost.php?p=10589647&postcount=17
+
+config USB_NET_CH9200
+	tristate "QingHeng CH9200 USB ethernet support"
+	depends on USB_USBNET
+	select MII
+	help
+	  Choose this option if you have a USB ethernet adapter with a QinHeng
+	  CH9200 chipset.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ch9200.
+
+config USB_NET_AQC111
+	tristate "Aquantia AQtion USB to 5/2.5GbE Controllers support"
+	depends on USB_USBNET
+	select CRC32
+	help
+	  This option adds support for Aquantia AQtion USB
+	  Ethernet adapters based on AQC111U/AQC112 chips.
+
+	  This driver should work with at least the following devices:
+	  * Aquantia AQtion USB to 5GbE
+
+config USB_RTL8153_ECM
+	tristate
+	depends on USB_NET_CDCETHER && (USB_RTL8152 || USB_RTL8152=n)
+	default y
+	help
+	  This option supports ECM mode for RTL8153 ethernet adapter, when
+	  CONFIG_USB_RTL8152 is not set, or the RTL8153 device is not
+	  supported by r8152 driver.
+
+endif # USB_NET_DRIVERS
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
new file mode 100644
index 000000000..4964f7b32
--- /dev/null
+++ b/drivers/net/usb/Makefile
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for USB Network drivers
+#
+
+obj-$(CONFIG_USB_CATC)		+= catc.o
+obj-$(CONFIG_USB_KAWETH)	+= kaweth.o
+obj-$(CONFIG_USB_PEGASUS)	+= pegasus.o
+obj-$(CONFIG_USB_RTL8150)	+= rtl8150.o
+obj-$(CONFIG_USB_RTL8152)	+= r8152.o
+obj-$(CONFIG_USB_HSO)		+= hso.o
+obj-$(CONFIG_USB_LAN78XX)	+= lan78xx.o
+obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
+asix-y := asix_devices.o asix_common.o ax88172a.o
+obj-$(CONFIG_USB_NET_AX88179_178A)      += ax88179_178a.o
+obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o
+obj-$(CONFIG_USB_NET_CDC_EEM)	+= cdc_eem.o
+obj-$(CONFIG_USB_NET_DM9601)	+= dm9601.o
+obj-$(CONFIG_USB_NET_SR9700)	+= sr9700.o
+obj-$(CONFIG_USB_NET_SR9800)	+= sr9800.o
+obj-$(CONFIG_USB_NET_SMSC75XX)	+= smsc75xx.o
+obj-$(CONFIG_USB_NET_SMSC95XX)	+= smsc95xx.o
+obj-$(CONFIG_USB_NET_GL620A)	+= gl620a.o
+obj-$(CONFIG_USB_NET_NET1080)	+= net1080.o
+obj-$(CONFIG_USB_NET_PLUSB)	+= plusb.o
+obj-$(CONFIG_USB_NET_RNDIS_HOST)	+= rndis_host.o
+obj-$(CONFIG_USB_NET_CDC_SUBSET_ENABLE)	+= cdc_subset.o
+obj-$(CONFIG_USB_NET_ZAURUS)	+= zaurus.o
+obj-$(CONFIG_USB_NET_MCS7830)	+= mcs7830.o
+obj-$(CONFIG_USB_USBNET)	+= usbnet.o
+obj-$(CONFIG_USB_NET_INT51X1)	+= int51x1.o
+obj-$(CONFIG_USB_CDC_PHONET)	+= cdc-phonet.o
+obj-$(CONFIG_USB_NET_KALMIA)	+= kalmia.o
+obj-$(CONFIG_USB_IPHETH)	+= ipheth.o
+obj-$(CONFIG_USB_SIERRA_NET)	+= sierra_net.o
+obj-$(CONFIG_USB_NET_CX82310_ETH)	+= cx82310_eth.o
+obj-$(CONFIG_USB_NET_CDC_NCM)	+= cdc_ncm.o
+obj-$(CONFIG_USB_NET_HUAWEI_CDC_NCM)	+= huawei_cdc_ncm.o
+obj-$(CONFIG_USB_VL600)		+= lg-vl600.o
+obj-$(CONFIG_USB_NET_QMI_WWAN)	+= qmi_wwan.o
+obj-$(CONFIG_USB_NET_CDC_MBIM)	+= cdc_mbim.o
+obj-$(CONFIG_USB_NET_CH9200)	+= ch9200.o
+obj-$(CONFIG_USB_NET_AQC111)	+= aqc111.o
+obj-$(CONFIG_USB_RTL8153_ECM)	+= r8153_ecm.o
diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
new file mode 100644
index 000000000..7b8afa589
--- /dev/null
+++ b/drivers/net/usb/aqc111.c
@@ -0,0 +1,1494 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Aquantia Corp. Aquantia AQtion USB to 5GbE Controller
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2002-2003 TiVo Inc.
+ * Copyright (C) 2017-2018 ASIX
+ * Copyright (C) 2018 Aquantia Corp.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/linkmode.h>
+
+#include "aqc111.h"
+
+#define DRIVER_NAME "aqc111"
+
+static int aqc111_read_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+				u16 index, u16 size, void *data)
+{
+	int ret;
+
+	ret = usbnet_read_cmd_nopm(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR |
+				   USB_RECIP_DEVICE, value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net,
+			    "Failed to read(0x%x) reg index 0x%04x: %d\n",
+			    cmd, index, ret);
+
+	return ret;
+}
+
+static int aqc111_read_cmd(struct usbnet *dev, u8 cmd, u16 value,
+			   u16 index, u16 size, void *data)
+{
+	int ret;
+
+	ret = usbnet_read_cmd(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR |
+			      USB_RECIP_DEVICE, value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net,
+			    "Failed to read(0x%x) reg index 0x%04x: %d\n",
+			    cmd, index, ret);
+
+	return ret;
+}
+
+static int aqc111_read16_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+				  u16 index, u16 *data)
+{
+	int ret = 0;
+
+	ret = aqc111_read_cmd_nopm(dev, cmd, value, index, sizeof(*data), data);
+	le16_to_cpus(data);
+
+	return ret;
+}
+
+static int aqc111_read16_cmd(struct usbnet *dev, u8 cmd, u16 value,
+			     u16 index, u16 *data)
+{
+	int ret = 0;
+
+	ret = aqc111_read_cmd(dev, cmd, value, index, sizeof(*data), data);
+	le16_to_cpus(data);
+
+	return ret;
+}
+
+static int __aqc111_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
+			      u16 value, u16 index, u16 size, const void *data)
+{
+	int err = -ENOMEM;
+	void *buf = NULL;
+
+	netdev_dbg(dev->net,
+		   "%s cmd=%#x reqtype=%#x value=%#x index=%#x size=%d\n",
+		   __func__, cmd, reqtype, value, index, size);
+
+	if (data) {
+		buf = kmemdup(data, size, GFP_KERNEL);
+		if (!buf)
+			goto out;
+	}
+
+	err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+			      cmd, reqtype, value, index, buf, size,
+			      (cmd == AQ_PHY_POWER) ? AQ_USB_PHY_SET_TIMEOUT :
+			      AQ_USB_SET_TIMEOUT);
+
+	if (unlikely(err < 0))
+		netdev_warn(dev->net,
+			    "Failed to write(0x%x) reg index 0x%04x: %d\n",
+			    cmd, index, err);
+	kfree(buf);
+
+out:
+	return err;
+}
+
+static int aqc111_write_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+				 u16 index, u16 size, void *data)
+{
+	int ret;
+
+	ret = __aqc111_write_cmd(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+				 USB_RECIP_DEVICE, value, index, size, data);
+
+	return ret;
+}
+
+static int aqc111_write_cmd(struct usbnet *dev, u8 cmd, u16 value,
+			    u16 index, u16 size, const void *data)
+{
+	int ret;
+
+	if (usb_autopm_get_interface(dev->intf) < 0)
+		return -ENODEV;
+
+	ret = __aqc111_write_cmd(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+				 USB_RECIP_DEVICE, value, index, size, data);
+
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static int aqc111_write16_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+				   u16 index, u16 *data)
+{
+	u16 tmp = *data;
+
+	cpu_to_le16s(&tmp);
+
+	return aqc111_write_cmd_nopm(dev, cmd, value, index, sizeof(tmp), &tmp);
+}
+
+static int aqc111_write16_cmd(struct usbnet *dev, u8 cmd, u16 value,
+			      u16 index, u16 *data)
+{
+	u16 tmp = *data;
+
+	cpu_to_le16s(&tmp);
+
+	return aqc111_write_cmd(dev, cmd, value, index, sizeof(tmp), &tmp);
+}
+
+static int aqc111_write32_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+				   u16 index, u32 *data)
+{
+	u32 tmp = *data;
+
+	cpu_to_le32s(&tmp);
+
+	return aqc111_write_cmd_nopm(dev, cmd, value, index, sizeof(tmp), &tmp);
+}
+
+static int aqc111_write32_cmd(struct usbnet *dev, u8 cmd, u16 value,
+			      u16 index, u32 *data)
+{
+	u32 tmp = *data;
+
+	cpu_to_le32s(&tmp);
+
+	return aqc111_write_cmd(dev, cmd, value, index, sizeof(tmp), &tmp);
+}
+
+static int aqc111_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
+				  u16 index, u16 size, void *data)
+{
+	return usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+				      USB_RECIP_DEVICE, value, index, data,
+				      size);
+}
+
+static int aqc111_write16_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
+				    u16 index, u16 *data)
+{
+	u16 tmp = *data;
+
+	cpu_to_le16s(&tmp);
+
+	return aqc111_write_cmd_async(dev, cmd, value, index,
+				      sizeof(tmp), &tmp);
+}
+
+static void aqc111_get_drvinfo(struct net_device *net,
+			       struct ethtool_drvinfo *info)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	strscpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+	snprintf(info->fw_version, sizeof(info->fw_version), "%u.%u.%u",
+		 aqc111_data->fw_ver.major,
+		 aqc111_data->fw_ver.minor,
+		 aqc111_data->fw_ver.rev);
+	info->eedump_len = 0x00;
+	info->regdump_len = 0x00;
+}
+
+static void aqc111_get_wol(struct net_device *net,
+			   struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+
+	wolinfo->supported = WAKE_MAGIC;
+	wolinfo->wolopts = 0;
+
+	if (aqc111_data->wol_flags & AQ_WOL_FLAG_MP)
+		wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int aqc111_set_wol(struct net_device *net,
+			  struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+
+	if (wolinfo->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+
+	aqc111_data->wol_flags = 0;
+	if (wolinfo->wolopts & WAKE_MAGIC)
+		aqc111_data->wol_flags |= AQ_WOL_FLAG_MP;
+
+	return 0;
+}
+
+static void aqc111_speed_to_link_mode(u32 speed,
+				      struct ethtool_link_ksettings *elk)
+{
+	switch (speed) {
+	case SPEED_5000:
+		ethtool_link_ksettings_add_link_mode(elk, advertising,
+						     5000baseT_Full);
+		break;
+	case SPEED_2500:
+		ethtool_link_ksettings_add_link_mode(elk, advertising,
+						     2500baseT_Full);
+		break;
+	case SPEED_1000:
+		ethtool_link_ksettings_add_link_mode(elk, advertising,
+						     1000baseT_Full);
+		break;
+	case SPEED_100:
+		ethtool_link_ksettings_add_link_mode(elk, advertising,
+						     100baseT_Full);
+		break;
+	}
+}
+
+static int aqc111_get_link_ksettings(struct net_device *net,
+				     struct ethtool_link_ksettings *elk)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	enum usb_device_speed usb_speed = dev->udev->speed;
+	u32 speed = SPEED_UNKNOWN;
+
+	ethtool_link_ksettings_zero_link_mode(elk, supported);
+	ethtool_link_ksettings_add_link_mode(elk, supported,
+					     100baseT_Full);
+	ethtool_link_ksettings_add_link_mode(elk, supported,
+					     1000baseT_Full);
+	if (usb_speed == USB_SPEED_SUPER) {
+		ethtool_link_ksettings_add_link_mode(elk, supported,
+						     2500baseT_Full);
+		ethtool_link_ksettings_add_link_mode(elk, supported,
+						     5000baseT_Full);
+	}
+	ethtool_link_ksettings_add_link_mode(elk, supported, TP);
+	ethtool_link_ksettings_add_link_mode(elk, supported, Autoneg);
+
+	elk->base.port = PORT_TP;
+	elk->base.transceiver = XCVR_INTERNAL;
+
+	elk->base.mdio_support = 0x00; /*Not supported*/
+
+	if (aqc111_data->autoneg)
+		linkmode_copy(elk->link_modes.advertising,
+			      elk->link_modes.supported);
+	else
+		aqc111_speed_to_link_mode(aqc111_data->advertised_speed, elk);
+
+	elk->base.autoneg = aqc111_data->autoneg;
+
+	switch (aqc111_data->link_speed) {
+	case AQ_INT_SPEED_5G:
+		speed = SPEED_5000;
+		break;
+	case AQ_INT_SPEED_2_5G:
+		speed = SPEED_2500;
+		break;
+	case AQ_INT_SPEED_1G:
+		speed = SPEED_1000;
+		break;
+	case AQ_INT_SPEED_100M:
+		speed = SPEED_100;
+		break;
+	}
+	elk->base.duplex = DUPLEX_FULL;
+	elk->base.speed = speed;
+
+	return 0;
+}
+
+static void aqc111_set_phy_speed(struct usbnet *dev, u8 autoneg, u16 speed)
+{
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+
+	aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
+	aqc111_data->phy_cfg |= AQ_PAUSE;
+	aqc111_data->phy_cfg |= AQ_ASYM_PAUSE;
+	aqc111_data->phy_cfg |= AQ_DOWNSHIFT;
+	aqc111_data->phy_cfg &= ~AQ_DSH_RETRIES_MASK;
+	aqc111_data->phy_cfg |= (3 << AQ_DSH_RETRIES_SHIFT) &
+				AQ_DSH_RETRIES_MASK;
+
+	if (autoneg == AUTONEG_ENABLE) {
+		switch (speed) {
+		case SPEED_5000:
+			aqc111_data->phy_cfg |= AQ_ADV_5G;
+			fallthrough;
+		case SPEED_2500:
+			aqc111_data->phy_cfg |= AQ_ADV_2G5;
+			fallthrough;
+		case SPEED_1000:
+			aqc111_data->phy_cfg |= AQ_ADV_1G;
+			fallthrough;
+		case SPEED_100:
+			aqc111_data->phy_cfg |= AQ_ADV_100M;
+			/* fall-through */
+		}
+	} else {
+		switch (speed) {
+		case SPEED_5000:
+			aqc111_data->phy_cfg |= AQ_ADV_5G;
+			break;
+		case SPEED_2500:
+			aqc111_data->phy_cfg |= AQ_ADV_2G5;
+			break;
+		case SPEED_1000:
+			aqc111_data->phy_cfg |= AQ_ADV_1G;
+			break;
+		case SPEED_100:
+			aqc111_data->phy_cfg |= AQ_ADV_100M;
+			break;
+		}
+	}
+
+	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0, &aqc111_data->phy_cfg);
+}
+
+static int aqc111_set_link_ksettings(struct net_device *net,
+				     const struct ethtool_link_ksettings *elk)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	enum usb_device_speed usb_speed = dev->udev->speed;
+	u8 autoneg = elk->base.autoneg;
+	u32 speed = elk->base.speed;
+
+	if (autoneg == AUTONEG_ENABLE) {
+		if (aqc111_data->autoneg != AUTONEG_ENABLE) {
+			aqc111_data->autoneg = AUTONEG_ENABLE;
+			aqc111_data->advertised_speed =
+					(usb_speed == USB_SPEED_SUPER) ?
+					 SPEED_5000 : SPEED_1000;
+			aqc111_set_phy_speed(dev, aqc111_data->autoneg,
+					     aqc111_data->advertised_speed);
+		}
+	} else {
+		if (speed != SPEED_100 &&
+		    speed != SPEED_1000 &&
+		    speed != SPEED_2500 &&
+		    speed != SPEED_5000 &&
+		    speed != SPEED_UNKNOWN)
+			return -EINVAL;
+
+		if (elk->base.duplex != DUPLEX_FULL)
+			return -EINVAL;
+
+		if (usb_speed != USB_SPEED_SUPER && speed > SPEED_1000)
+			return -EINVAL;
+
+		aqc111_data->autoneg = AUTONEG_DISABLE;
+		if (speed != SPEED_UNKNOWN)
+			aqc111_data->advertised_speed = speed;
+
+		aqc111_set_phy_speed(dev, aqc111_data->autoneg,
+				     aqc111_data->advertised_speed);
+	}
+
+	return 0;
+}
+
+static const struct ethtool_ops aqc111_ethtool_ops = {
+	.get_drvinfo = aqc111_get_drvinfo,
+	.get_wol = aqc111_get_wol,
+	.set_wol = aqc111_set_wol,
+	.get_msglevel = usbnet_get_msglevel,
+	.set_msglevel = usbnet_set_msglevel,
+	.get_link = ethtool_op_get_link,
+	.get_link_ksettings = aqc111_get_link_ksettings,
+	.set_link_ksettings = aqc111_set_link_ksettings
+};
+
+static int aqc111_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 reg16 = 0;
+	u8 buf[5];
+
+	net->mtu = new_mtu;
+	dev->hard_mtu = net->mtu + net->hard_header_len;
+
+	aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+			  2, &reg16);
+	if (net->mtu > 1500)
+		reg16 |= SFR_MEDIUM_JUMBO_EN;
+	else
+		reg16 &= ~SFR_MEDIUM_JUMBO_EN;
+
+	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+			   2, &reg16);
+
+	if (dev->net->mtu > 12500) {
+		memcpy(buf, &AQC111_BULKIN_SIZE[2], 5);
+		/* RX bulk configuration */
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QCTRL,
+				 5, 5, buf);
+	}
+
+	/* Set high low water level */
+	if (dev->net->mtu <= 4500)
+		reg16 = 0x0810;
+	else if (dev->net->mtu <= 9500)
+		reg16 = 0x1020;
+	else if (dev->net->mtu <= 12500)
+		reg16 = 0x1420;
+	else
+		reg16 = 0x1A20;
+
+	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_PAUSE_WATERLVL_LOW,
+			   2, &reg16);
+
+	return 0;
+}
+
+static int aqc111_set_mac_addr(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	int ret = 0;
+
+	ret = eth_mac_addr(net, p);
+	if (ret < 0)
+		return ret;
+
+	/* Set the MAC address */
+	return aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_NODE_ID, ETH_ALEN,
+				ETH_ALEN, net->dev_addr);
+}
+
+static int aqc111_vlan_rx_kill_vid(struct net_device *net,
+				   __be16 proto, u16 vid)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 vlan_ctrl = 0;
+	u16 reg16 = 0;
+	u8 reg8 = 0;
+
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, &reg8);
+	vlan_ctrl = reg8;
+
+	/* Address */
+	reg8 = (vid / 16);
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_ADDRESS, 1, 1, &reg8);
+	/* Data */
+	reg8 = vlan_ctrl | SFR_VLAN_CONTROL_RD;
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, &reg8);
+	aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_DATA0, 2, &reg16);
+	reg16 &= ~(1 << (vid % 16));
+	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_DATA0, 2, &reg16);
+	reg8 = vlan_ctrl | SFR_VLAN_CONTROL_WE;
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, &reg8);
+
+	return 0;
+}
+
+static int aqc111_vlan_rx_add_vid(struct net_device *net, __be16 proto, u16 vid)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 vlan_ctrl = 0;
+	u16 reg16 = 0;
+	u8 reg8 = 0;
+
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, &reg8);
+	vlan_ctrl = reg8;
+
+	/* Address */
+	reg8 = (vid / 16);
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_ADDRESS, 1, 1, &reg8);
+	/* Data */
+	reg8 = vlan_ctrl | SFR_VLAN_CONTROL_RD;
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, &reg8);
+	aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_DATA0, 2, &reg16);
+	reg16 |= (1 << (vid % 16));
+	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_DATA0, 2, &reg16);
+	reg8 = vlan_ctrl | SFR_VLAN_CONTROL_WE;
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL, 1, 1, &reg8);
+
+	return 0;
+}
+
+static void aqc111_set_rx_mode(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	int mc_count = 0;
+
+	mc_count = netdev_mc_count(net);
+
+	aqc111_data->rxctl &= ~(SFR_RX_CTL_PRO | SFR_RX_CTL_AMALL |
+				SFR_RX_CTL_AM);
+
+	if (net->flags & IFF_PROMISC) {
+		aqc111_data->rxctl |= SFR_RX_CTL_PRO;
+	} else if ((net->flags & IFF_ALLMULTI) || mc_count > AQ_MAX_MCAST) {
+		aqc111_data->rxctl |= SFR_RX_CTL_AMALL;
+	} else if (!netdev_mc_empty(net)) {
+		u8 m_filter[AQ_MCAST_FILTER_SIZE] = { 0 };
+		struct netdev_hw_addr *ha = NULL;
+		u32 crc_bits = 0;
+
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			m_filter[crc_bits >> 3] |= BIT(crc_bits & 7);
+		}
+
+		aqc111_write_cmd_async(dev, AQ_ACCESS_MAC,
+				       SFR_MULTI_FILTER_ARRY,
+				       AQ_MCAST_FILTER_SIZE,
+				       AQ_MCAST_FILTER_SIZE, m_filter);
+
+		aqc111_data->rxctl |= SFR_RX_CTL_AM;
+	}
+
+	aqc111_write16_cmd_async(dev, AQ_ACCESS_MAC, SFR_RX_CTL,
+				 2, &aqc111_data->rxctl);
+}
+
+static int aqc111_set_features(struct net_device *net,
+			       netdev_features_t features)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	netdev_features_t changed = net->features ^ features;
+	u16 reg16 = 0;
+	u8 reg8 = 0;
+
+	if (changed & NETIF_F_IP_CSUM) {
+		aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL, 1, 1, &reg8);
+		reg8 ^= SFR_TXCOE_TCP | SFR_TXCOE_UDP;
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL,
+				 1, 1, &reg8);
+	}
+
+	if (changed & NETIF_F_IPV6_CSUM) {
+		aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL, 1, 1, &reg8);
+		reg8 ^= SFR_TXCOE_TCPV6 | SFR_TXCOE_UDPV6;
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL,
+				 1, 1, &reg8);
+	}
+
+	if (changed & NETIF_F_RXCSUM) {
+		aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_RXCOE_CTL, 1, 1, &reg8);
+		if (features & NETIF_F_RXCSUM) {
+			aqc111_data->rx_checksum = 1;
+			reg8 &= ~(SFR_RXCOE_IP | SFR_RXCOE_TCP | SFR_RXCOE_UDP |
+				  SFR_RXCOE_TCPV6 | SFR_RXCOE_UDPV6);
+		} else {
+			aqc111_data->rx_checksum = 0;
+			reg8 |= SFR_RXCOE_IP | SFR_RXCOE_TCP | SFR_RXCOE_UDP |
+				SFR_RXCOE_TCPV6 | SFR_RXCOE_UDPV6;
+		}
+
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RXCOE_CTL,
+				 1, 1, &reg8);
+	}
+	if (changed & NETIF_F_HW_VLAN_CTAG_FILTER) {
+		if (features & NETIF_F_HW_VLAN_CTAG_FILTER) {
+			u16 i = 0;
+
+			for (i = 0; i < 256; i++) {
+				/* Address */
+				reg8 = i;
+				aqc111_write_cmd(dev, AQ_ACCESS_MAC,
+						 SFR_VLAN_ID_ADDRESS,
+						 1, 1, &reg8);
+				/* Data */
+				aqc111_write16_cmd(dev, AQ_ACCESS_MAC,
+						   SFR_VLAN_ID_DATA0,
+						   2, &reg16);
+				reg8 = SFR_VLAN_CONTROL_WE;
+				aqc111_write_cmd(dev, AQ_ACCESS_MAC,
+						 SFR_VLAN_ID_CONTROL,
+						 1, 1, &reg8);
+			}
+			aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL,
+					1, 1, &reg8);
+			reg8 |= SFR_VLAN_CONTROL_VFE;
+			aqc111_write_cmd(dev, AQ_ACCESS_MAC,
+					 SFR_VLAN_ID_CONTROL, 1, 1, &reg8);
+		} else {
+			aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL,
+					1, 1, &reg8);
+			reg8 &= ~SFR_VLAN_CONTROL_VFE;
+			aqc111_write_cmd(dev, AQ_ACCESS_MAC,
+					 SFR_VLAN_ID_CONTROL, 1, 1, &reg8);
+		}
+	}
+
+	return 0;
+}
+
+static const struct net_device_ops aqc111_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_change_mtu		= aqc111_change_mtu,
+	.ndo_set_mac_address	= aqc111_set_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_vlan_rx_add_vid	= aqc111_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= aqc111_vlan_rx_kill_vid,
+	.ndo_set_rx_mode	= aqc111_set_rx_mode,
+	.ndo_set_features	= aqc111_set_features,
+};
+
+static int aqc111_read_perm_mac(struct usbnet *dev)
+{
+	u8 buf[ETH_ALEN];
+	int ret;
+
+	ret = aqc111_read_cmd(dev, AQ_FLASH_PARAMETERS, 0, 0, ETH_ALEN, buf);
+	if (ret < 0)
+		goto out;
+
+	ether_addr_copy(dev->net->perm_addr, buf);
+
+	return 0;
+out:
+	return ret;
+}
+
+static void aqc111_read_fw_version(struct usbnet *dev,
+				   struct aqc111_data *aqc111_data)
+{
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_MAJOR,
+			1, 1, &aqc111_data->fw_ver.major);
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_MINOR,
+			1, 1, &aqc111_data->fw_ver.minor);
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_REV,
+			1, 1, &aqc111_data->fw_ver.rev);
+
+	if (aqc111_data->fw_ver.major & 0x80)
+		aqc111_data->fw_ver.major &= ~0x80;
+}
+
+static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	enum usb_device_speed usb_speed = udev->speed;
+	struct aqc111_data *aqc111_data;
+	int ret;
+
+	/* Check if vendor configuration */
+	if (udev->actconfig->desc.bConfigurationValue != 1) {
+		usb_driver_set_configuration(udev, 1);
+		return -ENODEV;
+	}
+
+	usb_reset_configuration(dev->udev);
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "usbnet_get_endpoints failed");
+		return ret;
+	}
+
+	aqc111_data = kzalloc(sizeof(*aqc111_data), GFP_KERNEL);
+	if (!aqc111_data)
+		return -ENOMEM;
+
+	/* store aqc111_data pointer in device data field */
+	dev->driver_priv = aqc111_data;
+
+	/* Init the MAC address */
+	ret = aqc111_read_perm_mac(dev);
+	if (ret)
+		goto out;
+
+	eth_hw_addr_set(dev->net, dev->net->perm_addr);
+
+	/* Set Rx urb size */
+	dev->rx_urb_size = URB_SIZE;
+
+	/* Set TX needed headroom & tailroom */
+	dev->net->needed_headroom += sizeof(u64);
+	dev->net->needed_tailroom += sizeof(u64);
+
+	dev->net->max_mtu = 16334;
+
+	dev->net->netdev_ops = &aqc111_netdev_ops;
+	dev->net->ethtool_ops = &aqc111_ethtool_ops;
+
+	if (usb_device_no_sg_constraint(dev->udev))
+		dev->can_dma_sg = 1;
+
+	dev->net->hw_features |= AQ_SUPPORT_HW_FEATURE;
+	dev->net->features |= AQ_SUPPORT_FEATURE;
+	dev->net->vlan_features |= AQ_SUPPORT_VLAN_FEATURE;
+
+	netif_set_tso_max_size(dev->net, 65535);
+
+	aqc111_read_fw_version(dev, aqc111_data);
+	aqc111_data->autoneg = AUTONEG_ENABLE;
+	aqc111_data->advertised_speed = (usb_speed == USB_SPEED_SUPER) ?
+					 SPEED_5000 : SPEED_1000;
+
+	return 0;
+
+out:
+	kfree(aqc111_data);
+	return ret;
+}
+
+static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u16 reg16;
+
+	/* Force bz */
+	reg16 = SFR_PHYPWR_RSTCTL_BZ;
+	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL,
+				2, &reg16);
+	reg16 = 0;
+	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL,
+				2, &reg16);
+
+	/* Power down ethernet PHY */
+	aqc111_data->phy_cfg &= ~AQ_ADV_MASK;
+	aqc111_data->phy_cfg |= AQ_LOW_POWER;
+	aqc111_data->phy_cfg &= ~AQ_PHY_POWER_EN;
+	aqc111_write32_cmd_nopm(dev, AQ_PHY_OPS, 0, 0,
+				&aqc111_data->phy_cfg);
+
+	kfree(aqc111_data);
+}
+
+static void aqc111_status(struct usbnet *dev, struct urb *urb)
+{
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u64 *event_data = NULL;
+	int link = 0;
+
+	if (urb->actual_length < sizeof(*event_data))
+		return;
+
+	event_data = urb->transfer_buffer;
+	le64_to_cpus(event_data);
+
+	if (*event_data & AQ_LS_MASK)
+		link = 1;
+	else
+		link = 0;
+
+	aqc111_data->link_speed = (*event_data & AQ_SPEED_MASK) >>
+				  AQ_SPEED_SHIFT;
+	aqc111_data->link = link;
+
+	if (netif_carrier_ok(dev->net) != link)
+		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+}
+
+static void aqc111_configure_rx(struct usbnet *dev,
+				struct aqc111_data *aqc111_data)
+{
+	enum usb_device_speed usb_speed = dev->udev->speed;
+	u16 link_speed = 0, usb_host = 0;
+	u8 buf[5] = { 0 };
+	u8 queue_num = 0;
+	u16 reg16 = 0;
+	u8 reg8 = 0;
+
+	buf[0] = 0x00;
+	buf[1] = 0xF8;
+	buf[2] = 0x07;
+	switch (aqc111_data->link_speed) {
+	case AQ_INT_SPEED_5G:
+		link_speed = 5000;
+		reg8 = 0x05;
+		reg16 = 0x001F;
+		break;
+	case AQ_INT_SPEED_2_5G:
+		link_speed = 2500;
+		reg16 = 0x003F;
+		break;
+	case AQ_INT_SPEED_1G:
+		link_speed = 1000;
+		reg16 = 0x009F;
+		break;
+	case AQ_INT_SPEED_100M:
+		link_speed = 100;
+		queue_num = 1;
+		reg16 = 0x063F;
+		buf[1] = 0xFB;
+		buf[2] = 0x4;
+		break;
+	}
+
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_INTER_PACKET_GAP_0,
+			 1, 1, &reg8);
+
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_TX_PAUSE_RESEND_T, 3, 3, buf);
+
+	switch (usb_speed) {
+	case USB_SPEED_SUPER:
+		usb_host = 3;
+		break;
+	case USB_SPEED_HIGH:
+		usb_host = 2;
+		break;
+	case USB_SPEED_FULL:
+	case USB_SPEED_LOW:
+		usb_host = 1;
+		queue_num = 0;
+		break;
+	default:
+		usb_host = 0;
+		break;
+	}
+
+	if (dev->net->mtu > 12500 && dev->net->mtu <= 16334)
+		queue_num = 2; /* For Jumbo packet 16KB */
+
+	memcpy(buf, &AQC111_BULKIN_SIZE[queue_num], 5);
+	/* RX bulk configuration */
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QCTRL, 5, 5, buf);
+
+	/* Set high low water level */
+	if (dev->net->mtu <= 4500)
+		reg16 = 0x0810;
+	else if (dev->net->mtu <= 9500)
+		reg16 = 0x1020;
+	else if (dev->net->mtu <= 12500)
+		reg16 = 0x1420;
+	else if (dev->net->mtu <= 16334)
+		reg16 = 0x1A20;
+
+	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_PAUSE_WATERLVL_LOW,
+			   2, &reg16);
+	netdev_info(dev->net, "Link Speed %d, USB %d", link_speed, usb_host);
+}
+
+static void aqc111_configure_csum_offload(struct usbnet *dev)
+{
+	u8 reg8 = 0;
+
+	if (dev->net->features & NETIF_F_RXCSUM) {
+		reg8 |= SFR_RXCOE_IP | SFR_RXCOE_TCP | SFR_RXCOE_UDP |
+			SFR_RXCOE_TCPV6 | SFR_RXCOE_UDPV6;
+	}
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_RXCOE_CTL, 1, 1, &reg8);
+
+	reg8 = 0;
+	if (dev->net->features & NETIF_F_IP_CSUM)
+		reg8 |= SFR_TXCOE_IP | SFR_TXCOE_TCP | SFR_TXCOE_UDP;
+
+	if (dev->net->features & NETIF_F_IPV6_CSUM)
+		reg8 |= SFR_TXCOE_TCPV6 | SFR_TXCOE_UDPV6;
+
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_TXCOE_CTL, 1, 1, &reg8);
+}
+
+static int aqc111_link_reset(struct usbnet *dev)
+{
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u16 reg16 = 0;
+	u8 reg8 = 0;
+
+	if (aqc111_data->link == 1) { /* Link up */
+		aqc111_configure_rx(dev, aqc111_data);
+
+		/* Vlan Tag Filter */
+		reg8 = SFR_VLAN_CONTROL_VSO;
+		if (dev->net->features & NETIF_F_HW_VLAN_CTAG_FILTER)
+			reg8 |= SFR_VLAN_CONTROL_VFE;
+
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_VLAN_ID_CONTROL,
+				 1, 1, &reg8);
+
+		reg8 = 0x0;
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BMRX_DMA_CONTROL,
+				 1, 1, &reg8);
+
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BMTX_DMA_CONTROL,
+				 1, 1, &reg8);
+
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_ARC_CTRL, 1, 1, &reg8);
+
+		reg16 = SFR_RX_CTL_IPE | SFR_RX_CTL_AB;
+		aqc111_data->rxctl = reg16;
+		aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
+
+		reg8 = SFR_RX_PATH_READY;
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_ETH_MAC_PATH,
+				 1, 1, &reg8);
+
+		reg8 = SFR_BULK_OUT_EFF_EN;
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL,
+				 1, 1, &reg8);
+
+		reg16 = 0;
+		aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+				   2, &reg16);
+
+		reg16 = SFR_MEDIUM_XGMIIMODE | SFR_MEDIUM_FULL_DUPLEX;
+		aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+				   2, &reg16);
+
+		aqc111_configure_csum_offload(dev);
+
+		aqc111_set_rx_mode(dev->net);
+
+		aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+				  2, &reg16);
+
+		if (dev->net->mtu > 1500)
+			reg16 |= SFR_MEDIUM_JUMBO_EN;
+
+		reg16 |= SFR_MEDIUM_RECEIVE_EN | SFR_MEDIUM_RXFLOW_CTRLEN |
+			 SFR_MEDIUM_TXFLOW_CTRLEN;
+		aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+				   2, &reg16);
+
+		aqc111_data->rxctl |= SFR_RX_CTL_START;
+		aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL,
+				   2, &aqc111_data->rxctl);
+
+		netif_carrier_on(dev->net);
+	} else {
+		aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+				  2, &reg16);
+		reg16 &= ~SFR_MEDIUM_RECEIVE_EN;
+		aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+				   2, &reg16);
+
+		aqc111_data->rxctl &= ~SFR_RX_CTL_START;
+		aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL,
+				   2, &aqc111_data->rxctl);
+
+		reg8 = SFR_BULK_OUT_FLUSH_EN | SFR_BULK_OUT_EFF_EN;
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL,
+				 1, 1, &reg8);
+		reg8 = SFR_BULK_OUT_EFF_EN;
+		aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL,
+				 1, 1, &reg8);
+
+		netif_carrier_off(dev->net);
+	}
+	return 0;
+}
+
+static int aqc111_reset(struct usbnet *dev)
+{
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u8 reg8 = 0;
+
+	dev->rx_urb_size = URB_SIZE;
+
+	if (usb_device_no_sg_constraint(dev->udev))
+		dev->can_dma_sg = 1;
+
+	dev->net->hw_features |= AQ_SUPPORT_HW_FEATURE;
+	dev->net->features |= AQ_SUPPORT_FEATURE;
+	dev->net->vlan_features |= AQ_SUPPORT_VLAN_FEATURE;
+
+	/* Power up ethernet PHY */
+	aqc111_data->phy_cfg = AQ_PHY_POWER_EN;
+	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
+			   &aqc111_data->phy_cfg);
+
+	/* Set the MAC address */
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_NODE_ID, ETH_ALEN,
+			 ETH_ALEN, dev->net->dev_addr);
+
+	reg8 = 0xFF;
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BM_INT_MASK, 1, 1, &reg8);
+
+	reg8 = 0x0;
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_SWP_CTRL, 1, 1, &reg8);
+
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, SFR_MONITOR_MODE, 1, 1, &reg8);
+	reg8 &= ~(SFR_MONITOR_MODE_EPHYRW | SFR_MONITOR_MODE_RWLC |
+		  SFR_MONITOR_MODE_RWMP | SFR_MONITOR_MODE_RWWF |
+		  SFR_MONITOR_MODE_RW_FLAG);
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_MONITOR_MODE, 1, 1, &reg8);
+
+	netif_carrier_off(dev->net);
+
+	/* Phy advertise */
+	aqc111_set_phy_speed(dev, aqc111_data->autoneg,
+			     aqc111_data->advertised_speed);
+
+	return 0;
+}
+
+static int aqc111_stop(struct usbnet *dev)
+{
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u16 reg16 = 0;
+
+	aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+			  2, &reg16);
+	reg16 &= ~SFR_MEDIUM_RECEIVE_EN;
+	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+			   2, &reg16);
+	reg16 = 0;
+	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
+
+	/* Put PHY to low power*/
+	aqc111_data->phy_cfg |= AQ_LOW_POWER;
+	aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
+			   &aqc111_data->phy_cfg);
+
+	netif_carrier_off(dev->net);
+
+	return 0;
+}
+
+static void aqc111_rx_checksum(struct sk_buff *skb, u64 pkt_desc)
+{
+	u32 pkt_type = 0;
+
+	skb->ip_summed = CHECKSUM_NONE;
+	/* checksum error bit is set */
+	if (pkt_desc & AQ_RX_PD_L4_ERR || pkt_desc & AQ_RX_PD_L3_ERR)
+		return;
+
+	pkt_type = pkt_desc & AQ_RX_PD_L4_TYPE_MASK;
+	/* It must be a TCP or UDP packet with a valid checksum */
+	if (pkt_type == AQ_RX_PD_L4_TCP || pkt_type == AQ_RX_PD_L4_UDP)
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+static int aqc111_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	struct sk_buff *new_skb = NULL;
+	u32 pkt_total_offset = 0;
+	u64 *pkt_desc_ptr = NULL;
+	u32 start_of_descs = 0;
+	u32 desc_offset = 0; /*RX Header Offset*/
+	u16 pkt_count = 0;
+	u64 desc_hdr = 0;
+	u16 vlan_tag = 0;
+	u32 skb_len;
+
+	if (!skb)
+		goto err;
+
+	skb_len = skb->len;
+	if (skb_len < sizeof(desc_hdr))
+		goto err;
+
+	/* RX Descriptor Header */
+	skb_trim(skb, skb_len - sizeof(desc_hdr));
+	desc_hdr = le64_to_cpup((u64 *)skb_tail_pointer(skb));
+
+	/* Check these packets */
+	desc_offset = (desc_hdr & AQ_RX_DH_DESC_OFFSET_MASK) >>
+		      AQ_RX_DH_DESC_OFFSET_SHIFT;
+	pkt_count = desc_hdr & AQ_RX_DH_PKT_CNT_MASK;
+	start_of_descs = skb_len - ((pkt_count + 1) *  sizeof(desc_hdr));
+
+	/* self check descs position */
+	if (start_of_descs != desc_offset)
+		goto err;
+
+	/* self check desc_offset from header and make sure that the
+	 * bounds of the metadata array are inside the SKB
+	 */
+	if (pkt_count * 2 + desc_offset >= skb_len)
+		goto err;
+
+	/* Packets must not overlap the metadata array */
+	skb_trim(skb, desc_offset);
+
+	if (pkt_count == 0)
+		goto err;
+
+	/* Get the first RX packet descriptor */
+	pkt_desc_ptr = (u64 *)(skb->data + desc_offset);
+
+	while (pkt_count--) {
+		u64 pkt_desc = le64_to_cpup(pkt_desc_ptr);
+		u32 pkt_len_with_padd = 0;
+		u32 pkt_len = 0;
+
+		pkt_len = (u32)((pkt_desc & AQ_RX_PD_LEN_MASK) >>
+			  AQ_RX_PD_LEN_SHIFT);
+		pkt_len_with_padd = ((pkt_len + 7) & 0x7FFF8);
+
+		pkt_total_offset += pkt_len_with_padd;
+		if (pkt_total_offset > desc_offset ||
+		    (pkt_count == 0 && pkt_total_offset != desc_offset)) {
+			goto err;
+		}
+
+		if (pkt_desc & AQ_RX_PD_DROP ||
+		    !(pkt_desc & AQ_RX_PD_RX_OK) ||
+		    pkt_len > (dev->hard_mtu + AQ_RX_HW_PAD)) {
+			skb_pull(skb, pkt_len_with_padd);
+			/* Next RX Packet Descriptor */
+			pkt_desc_ptr++;
+			continue;
+		}
+
+		/* Clone SKB */
+		new_skb = skb_clone(skb, GFP_ATOMIC);
+
+		if (!new_skb)
+			goto err;
+
+		new_skb->len = pkt_len;
+		skb_pull(new_skb, AQ_RX_HW_PAD);
+		skb_set_tail_pointer(new_skb, new_skb->len);
+
+		new_skb->truesize = SKB_TRUESIZE(new_skb->len);
+		if (aqc111_data->rx_checksum)
+			aqc111_rx_checksum(new_skb, pkt_desc);
+
+		if (pkt_desc & AQ_RX_PD_VLAN) {
+			vlan_tag = pkt_desc >> AQ_RX_PD_VLAN_SHIFT;
+			__vlan_hwaccel_put_tag(new_skb, htons(ETH_P_8021Q),
+					       vlan_tag & VLAN_VID_MASK);
+		}
+
+		usbnet_skb_return(dev, new_skb);
+		if (pkt_count == 0)
+			break;
+
+		skb_pull(skb, pkt_len_with_padd);
+
+		/* Next RX Packet Header */
+		pkt_desc_ptr++;
+
+		new_skb = NULL;
+	}
+
+	return 1;
+
+err:
+	return 0;
+}
+
+static struct sk_buff *aqc111_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	int frame_size = dev->maxpacket;
+	struct sk_buff *new_skb = NULL;
+	u64 *tx_desc_ptr = NULL;
+	int padding_size = 0;
+	int headroom = 0;
+	int tailroom = 0;
+	u64 tx_desc = 0;
+	u16 tci = 0;
+
+	/*Length of actual data*/
+	tx_desc |= skb->len & AQ_TX_DESC_LEN_MASK;
+
+	/* TSO MSS */
+	tx_desc |= ((u64)(skb_shinfo(skb)->gso_size & AQ_TX_DESC_MSS_MASK)) <<
+		   AQ_TX_DESC_MSS_SHIFT;
+
+	headroom = (skb->len + sizeof(tx_desc)) % 8;
+	if (headroom != 0)
+		padding_size = 8 - headroom;
+
+	if (((skb->len + sizeof(tx_desc) + padding_size) % frame_size) == 0) {
+		padding_size += 8;
+		tx_desc |= AQ_TX_DESC_DROP_PADD;
+	}
+
+	/* Vlan Tag */
+	if (vlan_get_tag(skb, &tci) >= 0) {
+		tx_desc |= AQ_TX_DESC_VLAN;
+		tx_desc |= ((u64)tci & AQ_TX_DESC_VLAN_MASK) <<
+			   AQ_TX_DESC_VLAN_SHIFT;
+	}
+
+	if (!dev->can_dma_sg && (dev->net->features & NETIF_F_SG) &&
+	    skb_linearize(skb))
+		return NULL;
+
+	headroom = skb_headroom(skb);
+	tailroom = skb_tailroom(skb);
+
+	if (!(headroom >= sizeof(tx_desc) && tailroom >= padding_size)) {
+		new_skb = skb_copy_expand(skb, sizeof(tx_desc),
+					  padding_size, flags);
+		dev_kfree_skb_any(skb);
+		skb = new_skb;
+		if (!skb)
+			return NULL;
+	}
+	if (padding_size != 0)
+		skb_put_zero(skb, padding_size);
+	/* Copy TX header */
+	tx_desc_ptr = skb_push(skb, sizeof(tx_desc));
+	*tx_desc_ptr = cpu_to_le64(tx_desc);
+
+	usbnet_set_skb_tx_stats(skb, 1, 0);
+
+	return skb;
+}
+
+static const struct driver_info aqc111_info = {
+	.description	= "Aquantia AQtion USB to 5GbE Controller",
+	.bind		= aqc111_bind,
+	.unbind		= aqc111_unbind,
+	.status		= aqc111_status,
+	.link_reset	= aqc111_link_reset,
+	.reset		= aqc111_reset,
+	.stop		= aqc111_stop,
+	.flags		= FLAG_ETHER | FLAG_FRAMING_AX |
+			  FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET,
+	.rx_fixup	= aqc111_rx_fixup,
+	.tx_fixup	= aqc111_tx_fixup,
+};
+
+#define ASIX111_DESC \
+"ASIX USB 3.1 Gen1 to 5G Multi-Gigabit Ethernet Adapter"
+
+static const struct driver_info asix111_info = {
+	.description	= ASIX111_DESC,
+	.bind		= aqc111_bind,
+	.unbind		= aqc111_unbind,
+	.status		= aqc111_status,
+	.link_reset	= aqc111_link_reset,
+	.reset		= aqc111_reset,
+	.stop		= aqc111_stop,
+	.flags		= FLAG_ETHER | FLAG_FRAMING_AX |
+			  FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET,
+	.rx_fixup	= aqc111_rx_fixup,
+	.tx_fixup	= aqc111_tx_fixup,
+};
+
+#undef ASIX111_DESC
+
+#define ASIX112_DESC \
+"ASIX USB 3.1 Gen1 to 2.5G Multi-Gigabit Ethernet Adapter"
+
+static const struct driver_info asix112_info = {
+	.description	= ASIX112_DESC,
+	.bind		= aqc111_bind,
+	.unbind		= aqc111_unbind,
+	.status		= aqc111_status,
+	.link_reset	= aqc111_link_reset,
+	.reset		= aqc111_reset,
+	.stop		= aqc111_stop,
+	.flags		= FLAG_ETHER | FLAG_FRAMING_AX |
+			  FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET,
+	.rx_fixup	= aqc111_rx_fixup,
+	.tx_fixup	= aqc111_tx_fixup,
+};
+
+#undef ASIX112_DESC
+
+static const struct driver_info trendnet_info = {
+	.description	= "USB-C 3.1 to 5GBASE-T Ethernet Adapter",
+	.bind		= aqc111_bind,
+	.unbind		= aqc111_unbind,
+	.status		= aqc111_status,
+	.link_reset	= aqc111_link_reset,
+	.reset		= aqc111_reset,
+	.stop		= aqc111_stop,
+	.flags		= FLAG_ETHER | FLAG_FRAMING_AX |
+			  FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET,
+	.rx_fixup	= aqc111_rx_fixup,
+	.tx_fixup	= aqc111_tx_fixup,
+};
+
+static const struct driver_info qnap_info = {
+	.description	= "QNAP QNA-UC5G1T USB to 5GbE Adapter",
+	.bind		= aqc111_bind,
+	.unbind		= aqc111_unbind,
+	.status		= aqc111_status,
+	.link_reset	= aqc111_link_reset,
+	.reset		= aqc111_reset,
+	.stop		= aqc111_stop,
+	.flags		= FLAG_ETHER | FLAG_FRAMING_AX |
+			  FLAG_AVOID_UNLINK_URBS | FLAG_MULTI_PACKET,
+	.rx_fixup	= aqc111_rx_fixup,
+	.tx_fixup	= aqc111_tx_fixup,
+};
+
+static int aqc111_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u16 temp_rx_ctrl = 0x00;
+	u16 reg16;
+	u8 reg8;
+
+	usbnet_suspend(intf, message);
+
+	aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
+	temp_rx_ctrl = reg16;
+	/* Stop RX operations*/
+	reg16 &= ~SFR_RX_CTL_START;
+	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
+	/* Force bz */
+	aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL,
+			       2, &reg16);
+	reg16 |= SFR_PHYPWR_RSTCTL_BZ;
+	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL,
+				2, &reg16);
+
+	reg8 = SFR_BULK_OUT_EFF_EN;
+	aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_BULK_OUT_CTRL,
+			      1, 1, &reg8);
+
+	temp_rx_ctrl &= ~(SFR_RX_CTL_START | SFR_RX_CTL_RF_WAK |
+			  SFR_RX_CTL_AP | SFR_RX_CTL_AM);
+	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL,
+				2, &temp_rx_ctrl);
+
+	reg8 = 0x00;
+	aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_ETH_MAC_PATH,
+			      1, 1, &reg8);
+
+	if (aqc111_data->wol_flags) {
+		struct aqc111_wol_cfg wol_cfg;
+
+		memset(&wol_cfg, 0, sizeof(struct aqc111_wol_cfg));
+
+		aqc111_data->phy_cfg |= AQ_WOL;
+		ether_addr_copy(wol_cfg.hw_addr, dev->net->dev_addr);
+		wol_cfg.flags = aqc111_data->wol_flags;
+
+		temp_rx_ctrl |= (SFR_RX_CTL_AB | SFR_RX_CTL_START);
+		aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL,
+					2, &temp_rx_ctrl);
+		reg8 = 0x00;
+		aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_BM_INT_MASK,
+				      1, 1, &reg8);
+		reg8 = SFR_BMRX_DMA_EN;
+		aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_BMRX_DMA_CONTROL,
+				      1, 1, &reg8);
+		reg8 = SFR_RX_PATH_READY;
+		aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_ETH_MAC_PATH,
+				      1, 1, &reg8);
+		reg8 = 0x07;
+		aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QCTRL,
+				      1, 1, &reg8);
+		reg8 = 0x00;
+		aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC,
+				      SFR_RX_BULKIN_QTIMR_LOW, 1, 1, &reg8);
+		aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC,
+				      SFR_RX_BULKIN_QTIMR_HIGH, 1, 1, &reg8);
+		reg8 = 0xFF;
+		aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QSIZE,
+				      1, 1, &reg8);
+		aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_BULKIN_QIFG,
+				      1, 1, &reg8);
+
+		aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC,
+				       SFR_MEDIUM_STATUS_MODE, 2, &reg16);
+		reg16 |= SFR_MEDIUM_RECEIVE_EN;
+		aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC,
+					SFR_MEDIUM_STATUS_MODE, 2, &reg16);
+
+		aqc111_write_cmd(dev, AQ_WOL_CFG, 0, 0,
+				 WOL_CFG_SIZE, &wol_cfg);
+		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
+				   &aqc111_data->phy_cfg);
+	} else {
+		aqc111_data->phy_cfg |= AQ_LOW_POWER;
+		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
+				   &aqc111_data->phy_cfg);
+
+		/* Disable RX path */
+		aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC,
+				       SFR_MEDIUM_STATUS_MODE, 2, &reg16);
+		reg16 &= ~SFR_MEDIUM_RECEIVE_EN;
+		aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC,
+					SFR_MEDIUM_STATUS_MODE, 2, &reg16);
+	}
+
+	return 0;
+}
+
+static int aqc111_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u16 reg16;
+	u8 reg8;
+
+	netif_carrier_off(dev->net);
+
+	/* Power up ethernet PHY */
+	aqc111_data->phy_cfg |= AQ_PHY_POWER_EN;
+	aqc111_data->phy_cfg &= ~AQ_LOW_POWER;
+	aqc111_data->phy_cfg &= ~AQ_WOL;
+
+	reg8 = 0xFF;
+	aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_BM_INT_MASK,
+			      1, 1, &reg8);
+	/* Configure RX control register => start operation */
+	reg16 = aqc111_data->rxctl;
+	reg16 &= ~SFR_RX_CTL_START;
+	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
+
+	reg16 |= SFR_RX_CTL_START;
+	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
+
+	aqc111_set_phy_speed(dev, aqc111_data->autoneg,
+			     aqc111_data->advertised_speed);
+
+	aqc111_read16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+			       2, &reg16);
+	reg16 |= SFR_MEDIUM_RECEIVE_EN;
+	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
+				2, &reg16);
+	reg8 = SFR_RX_PATH_READY;
+	aqc111_write_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_ETH_MAC_PATH,
+			      1, 1, &reg8);
+	reg8 = 0x0;
+	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BMRX_DMA_CONTROL, 1, 1, &reg8);
+
+	return usbnet_resume(intf);
+}
+
+#define AQC111_USB_ETH_DEV(vid, pid, table) \
+	USB_DEVICE_INTERFACE_CLASS((vid), (pid), USB_CLASS_VENDOR_SPEC), \
+	.driver_info = (unsigned long)&(table) \
+}, \
+{ \
+	USB_DEVICE_AND_INTERFACE_INFO((vid), (pid), \
+				      USB_CLASS_COMM, \
+				      USB_CDC_SUBCLASS_ETHERNET, \
+				      USB_CDC_PROTO_NONE), \
+	.driver_info = (unsigned long)&(table),
+
+static const struct usb_device_id products[] = {
+	{AQC111_USB_ETH_DEV(0x2eca, 0xc101, aqc111_info)},
+	{AQC111_USB_ETH_DEV(0x0b95, 0x2790, asix111_info)},
+	{AQC111_USB_ETH_DEV(0x0b95, 0x2791, asix112_info)},
+	{AQC111_USB_ETH_DEV(0x20f4, 0xe05a, trendnet_info)},
+	{AQC111_USB_ETH_DEV(0x1c04, 0x0015, qnap_info)},
+	{ },/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver aq_driver = {
+	.name		= "aqc111",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.suspend	= aqc111_suspend,
+	.resume		= aqc111_resume,
+	.disconnect	= usbnet_disconnect,
+};
+
+module_usb_driver(aq_driver);
+
+MODULE_DESCRIPTION("Aquantia AQtion USB to 5/2.5GbE Controllers");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/aqc111.h b/drivers/net/usb/aqc111.h
new file mode 100644
index 000000000..b562db4da
--- /dev/null
+++ b/drivers/net/usb/aqc111.h
@@ -0,0 +1,232 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Aquantia Corp. Aquantia AQtion USB to 5GbE Controller
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2002-2003 TiVo Inc.
+ * Copyright (C) 2017-2018 ASIX
+ * Copyright (C) 2018 Aquantia Corp.
+ */
+
+#ifndef __LINUX_USBNET_AQC111_H
+#define __LINUX_USBNET_AQC111_H
+
+#define URB_SIZE	(1024 * 62)
+
+#define AQ_MCAST_FILTER_SIZE		8
+#define AQ_MAX_MCAST			64
+
+#define AQ_ACCESS_MAC			0x01
+#define AQ_FLASH_PARAMETERS		0x20
+#define AQ_PHY_POWER			0x31
+#define AQ_WOL_CFG			0x60
+#define AQ_PHY_OPS			0x61
+
+#define AQ_USB_PHY_SET_TIMEOUT		10000
+#define AQ_USB_SET_TIMEOUT		4000
+
+/* Feature. ********************************************/
+#define AQ_SUPPORT_FEATURE	(NETIF_F_SG | NETIF_F_IP_CSUM |\
+				 NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |\
+				 NETIF_F_TSO | NETIF_F_HW_VLAN_CTAG_TX |\
+				 NETIF_F_HW_VLAN_CTAG_RX)
+
+#define AQ_SUPPORT_HW_FEATURE	(NETIF_F_SG | NETIF_F_IP_CSUM |\
+				 NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |\
+				 NETIF_F_TSO | NETIF_F_HW_VLAN_CTAG_FILTER)
+
+#define AQ_SUPPORT_VLAN_FEATURE (NETIF_F_SG | NETIF_F_IP_CSUM |\
+				 NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM |\
+				 NETIF_F_TSO)
+
+/* SFR Reg. ********************************************/
+
+#define SFR_GENERAL_STATUS		0x03
+#define SFR_CHIP_STATUS			0x05
+#define SFR_RX_CTL			0x0B
+	#define SFR_RX_CTL_TXPADCRC		0x0400
+	#define SFR_RX_CTL_IPE			0x0200
+	#define SFR_RX_CTL_DROPCRCERR		0x0100
+	#define SFR_RX_CTL_START		0x0080
+	#define SFR_RX_CTL_RF_WAK		0x0040
+	#define SFR_RX_CTL_AP			0x0020
+	#define SFR_RX_CTL_AM			0x0010
+	#define SFR_RX_CTL_AB			0x0008
+	#define SFR_RX_CTL_AMALL		0x0002
+	#define SFR_RX_CTL_PRO			0x0001
+	#define SFR_RX_CTL_STOP			0x0000
+#define SFR_INTER_PACKET_GAP_0		0x0D
+#define SFR_NODE_ID			0x10
+#define SFR_MULTI_FILTER_ARRY		0x16
+#define SFR_MEDIUM_STATUS_MODE		0x22
+	#define SFR_MEDIUM_XGMIIMODE		0x0001
+	#define SFR_MEDIUM_FULL_DUPLEX		0x0002
+	#define SFR_MEDIUM_RXFLOW_CTRLEN	0x0010
+	#define SFR_MEDIUM_TXFLOW_CTRLEN	0x0020
+	#define SFR_MEDIUM_JUMBO_EN		0x0040
+	#define SFR_MEDIUM_RECEIVE_EN		0x0100
+#define SFR_MONITOR_MODE		0x24
+	#define SFR_MONITOR_MODE_EPHYRW		0x01
+	#define SFR_MONITOR_MODE_RWLC		0x02
+	#define SFR_MONITOR_MODE_RWMP		0x04
+	#define SFR_MONITOR_MODE_RWWF		0x08
+	#define SFR_MONITOR_MODE_RW_FLAG	0x10
+	#define SFR_MONITOR_MODE_PMEPOL		0x20
+	#define SFR_MONITOR_MODE_PMETYPE	0x40
+#define SFR_PHYPWR_RSTCTL		0x26
+	#define SFR_PHYPWR_RSTCTL_BZ		0x0010
+	#define SFR_PHYPWR_RSTCTL_IPRL		0x0020
+#define SFR_VLAN_ID_ADDRESS		0x2A
+#define SFR_VLAN_ID_CONTROL		0x2B
+	#define SFR_VLAN_CONTROL_WE		0x0001
+	#define SFR_VLAN_CONTROL_RD		0x0002
+	#define SFR_VLAN_CONTROL_VSO		0x0010
+	#define SFR_VLAN_CONTROL_VFE		0x0020
+#define SFR_VLAN_ID_DATA0		0x2C
+#define SFR_VLAN_ID_DATA1		0x2D
+#define SFR_RX_BULKIN_QCTRL		0x2E
+	#define SFR_RX_BULKIN_QCTRL_TIME	0x01
+	#define SFR_RX_BULKIN_QCTRL_IFG		0x02
+	#define SFR_RX_BULKIN_QCTRL_SIZE	0x04
+#define SFR_RX_BULKIN_QTIMR_LOW		0x2F
+#define SFR_RX_BULKIN_QTIMR_HIGH	0x30
+#define SFR_RX_BULKIN_QSIZE		0x31
+#define SFR_RX_BULKIN_QIFG		0x32
+#define SFR_RXCOE_CTL			0x34
+	#define SFR_RXCOE_IP			0x01
+	#define SFR_RXCOE_TCP			0x02
+	#define SFR_RXCOE_UDP			0x04
+	#define SFR_RXCOE_ICMP			0x08
+	#define SFR_RXCOE_IGMP			0x10
+	#define SFR_RXCOE_TCPV6			0x20
+	#define SFR_RXCOE_UDPV6			0x40
+	#define SFR_RXCOE_ICMV6			0x80
+#define SFR_TXCOE_CTL			0x35
+	#define SFR_TXCOE_IP			0x01
+	#define SFR_TXCOE_TCP			0x02
+	#define SFR_TXCOE_UDP			0x04
+	#define SFR_TXCOE_ICMP			0x08
+	#define SFR_TXCOE_IGMP			0x10
+	#define SFR_TXCOE_TCPV6			0x20
+	#define SFR_TXCOE_UDPV6			0x40
+	#define SFR_TXCOE_ICMV6			0x80
+#define SFR_BM_INT_MASK			0x41
+#define SFR_BMRX_DMA_CONTROL		0x43
+	#define SFR_BMRX_DMA_EN			0x80
+#define SFR_BMTX_DMA_CONTROL		0x46
+#define SFR_PAUSE_WATERLVL_LOW		0x54
+#define SFR_PAUSE_WATERLVL_HIGH		0x55
+#define SFR_ARC_CTRL			0x9E
+#define SFR_SWP_CTRL			0xB1
+#define SFR_TX_PAUSE_RESEND_T		0xB2
+#define SFR_ETH_MAC_PATH		0xB7
+	#define SFR_RX_PATH_READY		0x01
+#define SFR_BULK_OUT_CTRL		0xB9
+	#define SFR_BULK_OUT_FLUSH_EN		0x01
+	#define SFR_BULK_OUT_EFF_EN		0x02
+
+#define AQ_FW_VER_MAJOR			0xDA
+#define AQ_FW_VER_MINOR			0xDB
+#define AQ_FW_VER_REV			0xDC
+
+/*PHY_OPS**********************************************************************/
+
+#define AQ_ADV_100M	BIT(0)
+#define AQ_ADV_1G	BIT(1)
+#define AQ_ADV_2G5	BIT(2)
+#define AQ_ADV_5G	BIT(3)
+#define AQ_ADV_MASK	0x0F
+
+#define AQ_PAUSE	BIT(16)
+#define AQ_ASYM_PAUSE	BIT(17)
+#define AQ_LOW_POWER	BIT(18)
+#define AQ_PHY_POWER_EN	BIT(19)
+#define AQ_WOL		BIT(20)
+#define AQ_DOWNSHIFT	BIT(21)
+
+#define AQ_DSH_RETRIES_SHIFT	0x18
+#define AQ_DSH_RETRIES_MASK	0xF000000
+
+#define AQ_WOL_FLAG_MP			0x2
+
+/******************************************************************************/
+
+struct aqc111_wol_cfg {
+	u8 hw_addr[6];
+	u8 flags;
+	u8 rsvd[283];
+} __packed;
+
+#define WOL_CFG_SIZE sizeof(struct aqc111_wol_cfg)
+
+struct aqc111_data {
+	u16 rxctl;
+	u8 rx_checksum;
+	u8 link_speed;
+	u8 link;
+	u8 autoneg;
+	u32 advertised_speed;
+	struct {
+		u8 major;
+		u8 minor;
+		u8 rev;
+	} fw_ver;
+	u32 phy_cfg;
+	u8 wol_flags;
+};
+
+#define AQ_LS_MASK		0x8000
+#define AQ_SPEED_MASK		0x7F00
+#define AQ_SPEED_SHIFT		0x0008
+#define AQ_INT_SPEED_5G		0x000F
+#define AQ_INT_SPEED_2_5G	0x0010
+#define AQ_INT_SPEED_1G		0x0011
+#define AQ_INT_SPEED_100M	0x0013
+
+/* TX Descriptor */
+#define AQ_TX_DESC_LEN_MASK	0x1FFFFF
+#define AQ_TX_DESC_DROP_PADD	BIT(28)
+#define AQ_TX_DESC_VLAN		BIT(29)
+#define AQ_TX_DESC_MSS_MASK	0x7FFF
+#define AQ_TX_DESC_MSS_SHIFT	0x20
+#define AQ_TX_DESC_VLAN_MASK	0xFFFF
+#define AQ_TX_DESC_VLAN_SHIFT	0x30
+
+#define AQ_RX_HW_PAD			0x02
+
+/* RX Packet Descriptor */
+#define AQ_RX_PD_L4_ERR		BIT(0)
+#define AQ_RX_PD_L3_ERR		BIT(1)
+#define AQ_RX_PD_L4_TYPE_MASK	0x1C
+#define AQ_RX_PD_L4_UDP		0x04
+#define AQ_RX_PD_L4_TCP		0x10
+#define AQ_RX_PD_L3_TYPE_MASK	0x60
+#define AQ_RX_PD_L3_IP		0x20
+#define AQ_RX_PD_L3_IP6		0x40
+
+#define AQ_RX_PD_VLAN		BIT(10)
+#define AQ_RX_PD_RX_OK		BIT(11)
+#define AQ_RX_PD_DROP		BIT(31)
+#define AQ_RX_PD_LEN_MASK	0x7FFF0000
+#define AQ_RX_PD_LEN_SHIFT	0x10
+#define AQ_RX_PD_VLAN_SHIFT	0x20
+
+/* RX Descriptor header */
+#define AQ_RX_DH_PKT_CNT_MASK		0x1FFF
+#define AQ_RX_DH_DESC_OFFSET_MASK	0xFFFFE000
+#define AQ_RX_DH_DESC_OFFSET_SHIFT	0x0D
+
+static struct {
+	unsigned char ctrl;
+	unsigned char timer_l;
+	unsigned char timer_h;
+	unsigned char size;
+	unsigned char ifg;
+} AQC111_BULKIN_SIZE[] = {
+	/* xHCI & EHCI & OHCI */
+	{7, 0x00, 0x01, 0x1E, 0xFF},/* 10G, 5G, 2.5G, 1G */
+	{7, 0xA0, 0x00, 0x14, 0x00},/* 100M */
+	/* Jumbo packet */
+	{7, 0x00, 0x01, 0x18, 0xFF},
+};
+
+#endif /* __LINUX_USBNET_AQC111_H */
diff --git a/drivers/net/usb/asix.h b/drivers/net/usb/asix.h
new file mode 100644
index 000000000..74162190b
--- /dev/null
+++ b/drivers/net/usb/asix.h
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ */
+
+#ifndef _ASIX_H
+#define _ASIX_H
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/if_vlan.h>
+#include <linux/phy.h>
+#include <net/selftests.h>
+#include <linux/phylink.h>
+
+#define DRIVER_VERSION "22-Dec-2011"
+#define DRIVER_NAME "asix"
+
+/* ASIX AX8817X based USB 2.0 Ethernet Devices */
+
+#define AX_CMD_SET_SW_MII		0x06
+#define AX_CMD_READ_MII_REG		0x07
+#define AX_CMD_WRITE_MII_REG		0x08
+#define AX_CMD_STATMNGSTS_REG		0x09
+#define AX_CMD_SET_HW_MII		0x0a
+#define AX_CMD_READ_EEPROM		0x0b
+#define AX_CMD_WRITE_EEPROM		0x0c
+#define AX_CMD_WRITE_ENABLE		0x0d
+#define AX_CMD_WRITE_DISABLE		0x0e
+#define AX_CMD_READ_RX_CTL		0x0f
+#define AX_CMD_WRITE_RX_CTL		0x10
+#define AX_CMD_READ_IPG012		0x11
+#define AX_CMD_WRITE_IPG0		0x12
+#define AX_CMD_WRITE_IPG1		0x13
+#define AX_CMD_READ_NODE_ID		0x13
+#define AX_CMD_WRITE_NODE_ID		0x14
+#define AX_CMD_WRITE_IPG2		0x14
+#define AX_CMD_WRITE_MULTI_FILTER	0x16
+#define AX88172_CMD_READ_NODE_ID	0x17
+#define AX_CMD_READ_PHY_ID		0x19
+#define AX_CMD_READ_MEDIUM_STATUS	0x1a
+#define AX_CMD_WRITE_MEDIUM_MODE	0x1b
+#define AX_CMD_READ_MONITOR_MODE	0x1c
+#define AX_CMD_WRITE_MONITOR_MODE	0x1d
+#define AX_CMD_READ_GPIOS		0x1e
+#define AX_CMD_WRITE_GPIOS		0x1f
+#define AX_CMD_SW_RESET			0x20
+#define AX_CMD_SW_PHY_STATUS		0x21
+#define AX_CMD_SW_PHY_SELECT		0x22
+#define AX_QCTCTRL			0x2A
+
+#define AX_CHIPCODE_MASK		0x70
+#define AX_AX88772_CHIPCODE		0x00
+#define AX_AX88772A_CHIPCODE		0x10
+#define AX_AX88772B_CHIPCODE		0x20
+#define AX_HOST_EN			0x01
+
+#define AX_PHYSEL_PSEL			0x01
+#define AX_PHYSEL_SSMII			0
+#define AX_PHYSEL_SSEN			0x10
+
+#define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
+#define AX_PHY_SELECT_INTERNAL		0
+#define AX_PHY_SELECT_EXTERNAL		BIT(2)
+
+#define AX_MONITOR_MODE			0x01
+#define AX_MONITOR_LINK			0x02
+#define AX_MONITOR_MAGIC		0x04
+#define AX_MONITOR_HSFS			0x10
+
+/* AX88172 Medium Status Register values */
+#define AX88172_MEDIUM_FD		0x02
+#define AX88172_MEDIUM_TX		0x04
+#define AX88172_MEDIUM_FC		0x10
+#define AX88172_MEDIUM_DEFAULT \
+		( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )
+
+#define AX_MCAST_FILTER_SIZE		8
+#define AX_MAX_MCAST			64
+
+#define AX_SWRESET_CLEAR		0x00
+#define AX_SWRESET_RR			0x01
+#define AX_SWRESET_RT			0x02
+#define AX_SWRESET_PRTE			0x04
+#define AX_SWRESET_PRL			0x08
+#define AX_SWRESET_BZ			0x10
+#define AX_SWRESET_IPRL			0x20
+#define AX_SWRESET_IPPD			0x40
+
+#define AX88772_IPG0_DEFAULT		0x15
+#define AX88772_IPG1_DEFAULT		0x0c
+#define AX88772_IPG2_DEFAULT		0x12
+
+/* AX88772 & AX88178 Medium Mode Register */
+#define AX_MEDIUM_PF		0x0080
+#define AX_MEDIUM_JFE		0x0040
+#define AX_MEDIUM_TFC		0x0020
+#define AX_MEDIUM_RFC		0x0010
+#define AX_MEDIUM_ENCK		0x0008
+#define AX_MEDIUM_AC		0x0004
+#define AX_MEDIUM_FD		0x0002
+#define AX_MEDIUM_GM		0x0001
+#define AX_MEDIUM_SM		0x1000
+#define AX_MEDIUM_SBP		0x0800
+#define AX_MEDIUM_PS		0x0200
+#define AX_MEDIUM_RE		0x0100
+
+#define AX88178_MEDIUM_DEFAULT	\
+	(AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
+	 AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
+	 AX_MEDIUM_RE)
+
+#define AX88772_MEDIUM_DEFAULT	\
+	(AX_MEDIUM_FD | AX_MEDIUM_PS | \
+	 AX_MEDIUM_AC | AX_MEDIUM_RE)
+
+/* AX88772 & AX88178 RX_CTL values */
+#define AX_RX_CTL_SO		0x0080
+#define AX_RX_CTL_AP		0x0020
+#define AX_RX_CTL_AM		0x0010
+#define AX_RX_CTL_AB		0x0008
+#define AX_RX_CTL_SEP		0x0004
+#define AX_RX_CTL_AMALL		0x0002
+#define AX_RX_CTL_PRO		0x0001
+#define AX_RX_CTL_MFB_2048	0x0000
+#define AX_RX_CTL_MFB_4096	0x0100
+#define AX_RX_CTL_MFB_8192	0x0200
+#define AX_RX_CTL_MFB_16384	0x0300
+
+#define AX_DEFAULT_RX_CTL	(AX_RX_CTL_SO | AX_RX_CTL_AB)
+
+/* GPIO 0 .. 2 toggles */
+#define AX_GPIO_GPO0EN		0x01	/* GPIO0 Output enable */
+#define AX_GPIO_GPO_0		0x02	/* GPIO0 Output value */
+#define AX_GPIO_GPO1EN		0x04	/* GPIO1 Output enable */
+#define AX_GPIO_GPO_1		0x08	/* GPIO1 Output value */
+#define AX_GPIO_GPO2EN		0x10	/* GPIO2 Output enable */
+#define AX_GPIO_GPO_2		0x20	/* GPIO2 Output value */
+#define AX_GPIO_RESERVED	0x40	/* Reserved */
+#define AX_GPIO_RSE		0x80	/* Reload serial EEPROM */
+
+#define AX_EEPROM_MAGIC		0xdeadbeef
+#define AX_EEPROM_LEN		0x200
+
+#define AX_EMBD_PHY_ADDR	0x10
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct asix_data {
+	u8 multi_filter[AX_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
+	u8 phymode;
+	u8 ledmode;
+	u8 res;
+};
+
+struct asix_rx_fixup_info {
+	struct sk_buff *ax_skb;
+	u32 header;
+	u16 remaining;
+	bool split_head;
+};
+
+struct asix_common_private {
+	void (*resume)(struct usbnet *dev);
+	void (*suspend)(struct usbnet *dev);
+	int (*reset)(struct usbnet *dev, int in_pm);
+	u16 presvd_phy_advertise;
+	u16 presvd_phy_bmcr;
+	struct asix_rx_fixup_info rx_fixup_info;
+	struct mii_bus *mdio;
+	struct phy_device *phydev;
+	struct phy_device *phydev_int;
+	struct phylink *phylink;
+	struct phylink_config phylink_config;
+	u16 phy_addr;
+	bool embd_phy;
+	u8 chipcode;
+};
+
+extern const struct driver_info ax88172a_info;
+
+/* ASIX specific flags */
+#define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */
+
+int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			       u16 size, void *data, int in_pm);
+
+int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		   u16 size, void *data, int in_pm);
+
+void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
+			  u16 index, u16 size, void *data);
+
+int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
+			   struct asix_rx_fixup_info *rx);
+int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
+void asix_rx_fixup_common_free(struct asix_common_private *dp);
+
+struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+			      gfp_t flags);
+
+int asix_read_phy_addr(struct usbnet *dev, bool internal);
+
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm);
+
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm);
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);
+
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);
+void asix_adjust_link(struct net_device *netdev);
+
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);
+
+void asix_set_multicast(struct net_device *net);
+
+int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);
+
+int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum);
+int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val);
+
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
+void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
+			  int val);
+
+void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
+int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
+
+int asix_get_eeprom_len(struct net_device *net);
+int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data);
+int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data);
+
+void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info);
+
+int asix_set_mac_address(struct net_device *net, void *p);
+
+#endif /* _ASIX_H */
diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
new file mode 100644
index 000000000..72ffc89b4
--- /dev/null
+++ b/drivers/net/usb/asix_common.c
@@ -0,0 +1,781 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ */
+
+#include "asix.h"
+
+#define AX_HOST_EN_RETRIES	30
+
+int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			       u16 size, void *data, int in_pm)
+{
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < size)) {
+		ret = ret < 0 ? ret : -ENODATA;
+
+		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+			    index, ret);
+	}
+
+	return ret;
+}
+
+int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		   u16 size, void *data, int in_pm)
+{
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			  u16 size, void *data)
+{
+	usbnet_write_cmd_async(dev, cmd,
+			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       value, index, data, size);
+}
+
+static int asix_set_sw_mii(struct usbnet *dev, int in_pm)
+{
+	int ret;
+
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
+
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable software MII access\n");
+	return ret;
+}
+
+static int asix_set_hw_mii(struct usbnet *dev, int in_pm)
+{
+	int ret;
+
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable hardware MII access\n");
+	return ret;
+}
+
+static int asix_check_host_enable(struct usbnet *dev, int in_pm)
+{
+	int i, ret;
+	u8 smsr;
+
+	for (i = 0; i < AX_HOST_EN_RETRIES; ++i) {
+		ret = asix_set_sw_mii(dev, in_pm);
+		if (ret == -ENODEV || ret == -ETIMEDOUT)
+			break;
+		usleep_range(1000, 1100);
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, in_pm);
+		if (ret == -ENODEV)
+			break;
+		else if (ret < 0)
+			continue;
+		else if (smsr & AX_HOST_EN)
+			break;
+	}
+
+	return i >= AX_HOST_EN_RETRIES ? -ETIMEDOUT : ret;
+}
+
+static void reset_asix_rx_fixup_info(struct asix_rx_fixup_info *rx)
+{
+	/* Reset the variables that have a lifetime outside of
+	 * asix_rx_fixup_internal() so that future processing starts from a
+	 * known set of initial conditions.
+	 */
+
+	if (rx->ax_skb) {
+		/* Discard any incomplete Ethernet frame in the netdev buffer */
+		kfree_skb(rx->ax_skb);
+		rx->ax_skb = NULL;
+	}
+
+	/* Assume the Data header 32-bit word is at the start of the current
+	 * or next URB socket buffer so reset all the state variables.
+	 */
+	rx->remaining = 0;
+	rx->split_head = false;
+	rx->header = 0;
+}
+
+int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
+			   struct asix_rx_fixup_info *rx)
+{
+	int offset = 0;
+	u16 size;
+
+	/* When an Ethernet frame spans multiple URB socket buffers,
+	 * do a sanity test for the Data header synchronisation.
+	 * Attempt to detect the situation of the previous socket buffer having
+	 * been truncated or a socket buffer was missing. These situations
+	 * cause a discontinuity in the data stream and therefore need to avoid
+	 * appending bad data to the end of the current netdev socket buffer.
+	 * Also avoid unnecessarily discarding a good current netdev socket
+	 * buffer.
+	 */
+	if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) {
+		offset = ((rx->remaining + 1) & 0xfffe);
+		rx->header = get_unaligned_le32(skb->data + offset);
+		offset = 0;
+
+		size = (u16)(rx->header & 0x7ff);
+		if (size != ((~rx->header >> 16) & 0x7ff)) {
+			netdev_err(dev->net, "asix_rx_fixup() Data Header synchronisation was lost, remaining %d\n",
+				   rx->remaining);
+			reset_asix_rx_fixup_info(rx);
+		}
+	}
+
+	while (offset + sizeof(u16) <= skb->len) {
+		u16 copy_length;
+
+		if (!rx->remaining) {
+			if (skb->len - offset == sizeof(u16)) {
+				rx->header = get_unaligned_le16(
+						skb->data + offset);
+				rx->split_head = true;
+				offset += sizeof(u16);
+				break;
+			}
+
+			if (rx->split_head == true) {
+				rx->header |= (get_unaligned_le16(
+						skb->data + offset) << 16);
+				rx->split_head = false;
+				offset += sizeof(u16);
+			} else {
+				rx->header = get_unaligned_le32(skb->data +
+								offset);
+				offset += sizeof(u32);
+			}
+
+			/* take frame length from Data header 32-bit word */
+			size = (u16)(rx->header & 0x7ff);
+			if (size != ((~rx->header >> 16) & 0x7ff)) {
+				netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n",
+					   rx->header, offset);
+				reset_asix_rx_fixup_info(rx);
+				return 0;
+			}
+			if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
+				netdev_dbg(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
+					   size);
+				reset_asix_rx_fixup_info(rx);
+				return 0;
+			}
+
+			/* Sometimes may fail to get a netdev socket buffer but
+			 * continue to process the URB socket buffer so that
+			 * synchronisation of the Ethernet frame Data header
+			 * word is maintained.
+			 */
+			rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
+
+			rx->remaining = size;
+		}
+
+		if (rx->remaining > skb->len - offset) {
+			copy_length = skb->len - offset;
+			rx->remaining -= copy_length;
+		} else {
+			copy_length = rx->remaining;
+			rx->remaining = 0;
+		}
+
+		if (rx->ax_skb) {
+			skb_put_data(rx->ax_skb, skb->data + offset,
+				     copy_length);
+			if (!rx->remaining) {
+				usbnet_skb_return(dev, rx->ax_skb);
+				rx->ax_skb = NULL;
+			}
+		}
+
+		offset += (copy_length + 1) & 0xfffe;
+	}
+
+	if (skb->len != offset) {
+		netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n",
+			   skb->len, offset);
+		reset_asix_rx_fixup_info(rx);
+		return 0;
+	}
+
+	return 1;
+}
+
+int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct asix_common_private *dp = dev->driver_priv;
+	struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
+
+	return asix_rx_fixup_internal(dev, skb, rx);
+}
+
+void asix_rx_fixup_common_free(struct asix_common_private *dp)
+{
+	struct asix_rx_fixup_info *rx;
+
+	if (!dp)
+		return;
+
+	rx = &dp->rx_fixup_info;
+
+	if (rx->ax_skb) {
+		kfree_skb(rx->ax_skb);
+		rx->ax_skb = NULL;
+	}
+}
+
+struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+			      gfp_t flags)
+{
+	int padlen;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	u32 packet_len;
+	u32 padbytes = 0xffff0000;
+	void *ptr;
+
+	padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
+
+	/* We need to push 4 bytes in front of frame (packet_len)
+	 * and maybe add 4 bytes after the end (if padlen is 4)
+	 *
+	 * Avoid skb_copy_expand() expensive call, using following rules :
+	 * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
+	 *   is false (and if we have 4 bytes of headroom)
+	 * - We are allowed to put 4 bytes at tail if skb_cloned()
+	 *   is false (and if we have 4 bytes of tailroom)
+	 *
+	 * TCP packets for example are cloned, but __skb_header_release()
+	 * was called in tcp stack, allowing us to use headroom for our needs.
+	 */
+	if (!skb_header_cloned(skb) &&
+	    !(padlen && skb_cloned(skb)) &&
+	    headroom + tailroom >= 4 + padlen) {
+		/* following should not happen, but better be safe */
+		if (headroom < 4 ||
+		    tailroom < padlen) {
+			skb->data = memmove(skb->head + 4, skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, 4, padlen, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
+	ptr = skb_push(skb, 4);
+	put_unaligned_le32(packet_len, ptr);
+
+	if (padlen) {
+		put_unaligned_le32(padbytes, skb_tail_pointer(skb));
+		skb_put(skb, sizeof(padbytes));
+	}
+
+	usbnet_set_skb_tx_stats(skb, 1, 0);
+	return skb;
+}
+
+int asix_read_phy_addr(struct usbnet *dev, bool internal)
+{
+	int ret, offset;
+	u8 buf[2];
+
+	ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
+	if (ret < 0)
+		goto error;
+
+	if (ret < 2) {
+		ret = -EIO;
+		goto error;
+	}
+
+	offset = (internal ? 1 : 0);
+	ret = buf[offset];
+
+	netdev_dbg(dev->net, "%s PHY address 0x%x\n",
+		   internal ? "internal" : "external", ret);
+
+	return ret;
+
+error:
+	netdev_err(dev->net, "Error reading PHY_ID register: %02x\n", ret);
+
+	return ret;
+}
+
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
+{
+	int ret;
+
+	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
+
+	return ret;
+}
+
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
+		goto out;
+	}
+	ret = le16_to_cpu(v);
+out:
+	return ret;
+}
+
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
+				0, 0, 2, &v, in_pm);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
+			   ret);
+		return ret;	/* TODO: callers not checking for error ret */
+	}
+
+	return le16_to_cpu(v);
+
+}
+
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+			     mode, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+/* set MAC link settings according to information from phylib */
+void asix_adjust_link(struct net_device *netdev)
+{
+	struct phy_device *phydev = netdev->phydev;
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 mode = 0;
+
+	if (phydev->link) {
+		mode = AX88772_MEDIUM_DEFAULT;
+
+		if (phydev->duplex == DUPLEX_HALF)
+			mode &= ~AX_MEDIUM_FD;
+
+		if (phydev->speed != SPEED_100)
+			mode &= ~AX_MEDIUM_PS;
+	}
+
+	asix_write_medium_mode(dev, mode, 0);
+	phy_print_status(phydev);
+	usbnet_link_change(dev, phydev->link, 0);
+}
+
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
+			   value, ret);
+
+	if (sleep)
+		msleep(sleep);
+
+	return ret;
+}
+
+/*
+ * AX88772 & AX88178 have a 16-bit RX_CTL value
+ */
+void asix_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u16 rx_ctl = AX_DEFAULT_RX_CTL;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= AX_RX_CTL_PRO;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		rx_ctl |= AX_RX_CTL_AMALL;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= AX_RX_CTL_AM;
+	}
+
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int __asix_mdio_read(struct net_device *netdev, int phy_id, int loc,
+			    bool in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = asix_check_host_enable(dev, in_pm);
+	if (ret == -ENODEV || ret == -ETIMEDOUT) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
+
+	ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2,
+			    &res, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_set_hw_mii(dev, in_pm);
+out:
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+			phy_id, loc, le16_to_cpu(res));
+
+	return ret < 0 ? ret : le16_to_cpu(res);
+}
+
+int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	return __asix_mdio_read(netdev, phy_id, loc, false);
+}
+
+static int __asix_mdio_write(struct net_device *netdev, int phy_id, int loc,
+			     int val, bool in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+	int ret;
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+			phy_id, loc, val);
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = asix_check_host_enable(dev, in_pm);
+	if (ret == -ENODEV)
+		goto out;
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2,
+			     &res, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_set_hw_mii(dev, in_pm);
+out:
+	mutex_unlock(&dev->phy_mutex);
+
+	return ret < 0 ? ret : 0;
+}
+
+void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	__asix_mdio_write(netdev, phy_id, loc, val, false);
+}
+
+/* MDIO read and write wrappers for phylib */
+int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+	struct usbnet *priv = bus->priv;
+
+	return __asix_mdio_read(priv->net, phy_id, regnum, false);
+}
+
+int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val)
+{
+	struct usbnet *priv = bus->priv;
+
+	return __asix_mdio_write(priv->net, phy_id, regnum, val, false);
+}
+
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
+{
+	return __asix_mdio_read(netdev, phy_id, loc, true);
+}
+
+void
+asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	__asix_mdio_write(netdev, phy_id, loc, val, true);
+}
+
+void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt;
+
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
+			  0, 0, 1, &opt, 0) < 0) {
+		wolinfo->supported = 0;
+		wolinfo->wolopts = 0;
+		return;
+	}
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = 0;
+	if (opt & AX_MONITOR_LINK)
+		wolinfo->wolopts |= WAKE_PHY;
+	if (opt & AX_MONITOR_MAGIC)
+		wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt = 0;
+
+	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
+	if (wolinfo->wolopts & WAKE_PHY)
+		opt |= AX_MONITOR_LINK;
+	if (wolinfo->wolopts & WAKE_MAGIC)
+		opt |= AX_MONITOR_MAGIC;
+
+	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+			      opt, 0, 0, NULL, 0) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+int asix_get_eeprom_len(struct net_device *net)
+{
+	return AX_EEPROM_LEN;
+}
+
+int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = AX_EEPROM_MAGIC;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
+				    GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* ax8817x returns 2 bytes from eeprom on read */
+	for (i = first_word; i <= last_word; i++) {
+		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
+				  &eeprom_buff[i - first_word], 0) < 0) {
+			kfree(eeprom_buff);
+			return -EIO;
+		}
+	}
+
+	memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+	kfree(eeprom_buff);
+	return 0;
+}
+
+int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i;
+	int ret;
+
+	netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
+		   eeprom->len, eeprom->offset, eeprom->magic);
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	if (eeprom->magic != AX_EEPROM_MAGIC)
+		return -EINVAL;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
+				    GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* align data to 16 bit boundaries, read the missing data from
+	   the EEPROM */
+	if (eeprom->offset & 1) {
+		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
+				    &eeprom_buff[0], 0);
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
+			goto free;
+		}
+	}
+
+	if ((eeprom->offset + eeprom->len) & 1) {
+		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
+				    &eeprom_buff[last_word - first_word], 0);
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
+			goto free;
+		}
+	}
+
+	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
+
+	/* write data to EEPROM */
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
+	if (ret < 0) {
+		netdev_err(net, "Failed to enable EEPROM write\n");
+		goto free;
+	}
+	msleep(20);
+
+	for (i = first_word; i <= last_word; i++) {
+		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
+			   i, eeprom_buff[i - first_word]);
+		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
+				     eeprom_buff[i - first_word], 0, NULL, 0);
+		if (ret < 0) {
+			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
+				   i);
+			goto free;
+		}
+		msleep(20);
+	}
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
+	if (ret < 0) {
+		netdev_err(net, "Failed to disable EEPROM write\n");
+		goto free;
+	}
+
+	ret = 0;
+free:
+	kfree(eeprom_buff);
+	return ret;
+}
+
+void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
+{
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	strscpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+	strscpy(info->version, DRIVER_VERSION, sizeof(info->version));
+}
+
+int asix_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	eth_hw_addr_set(net, addr->sa_data);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+
+	return 0;
+}
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
new file mode 100644
index 000000000..6eacbf17f
--- /dev/null
+++ b/drivers/net/usb/asix_devices.c
@@ -0,0 +1,1587 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ */
+
+#include "asix.h"
+
+#define PHY_MODE_MARVELL	0x0000
+#define MII_MARVELL_LED_CTRL	0x0018
+#define MII_MARVELL_STATUS	0x001b
+#define MII_MARVELL_CTRL	0x0014
+
+#define MARVELL_LED_MANUAL	0x0019
+
+#define MARVELL_STATUS_HWCFG	0x0004
+
+#define MARVELL_CTRL_TXDELAY	0x0002
+#define MARVELL_CTRL_RXDELAY	0x0080
+
+#define	PHY_MODE_RTL8211CL	0x000C
+
+#define AX88772A_PHY14H		0x14
+#define AX88772A_PHY14H_DEFAULT 0x442C
+
+#define AX88772A_PHY15H		0x15
+#define AX88772A_PHY15H_DEFAULT 0x03C8
+
+#define AX88772A_PHY16H		0x16
+#define AX88772A_PHY16H_DEFAULT 0x4044
+
+struct ax88172_int_data {
+	__le16 res1;
+	u8 link;
+	__le16 res2;
+	u8 status;
+	__le16 res3;
+} __packed;
+
+static void asix_status(struct usbnet *dev, struct urb *urb)
+{
+	struct ax88172_int_data *event;
+	int link;
+
+	if (urb->actual_length < 8)
+		return;
+
+	event = urb->transfer_buffer;
+	link = event->link & 0x01;
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static void asix_set_netdev_dev_addr(struct usbnet *dev, u8 *addr)
+{
+	if (is_valid_ether_addr(addr)) {
+		eth_hw_addr_set(dev->net, addr);
+	} else {
+		netdev_info(dev->net, "invalid hw address, using random\n");
+		eth_hw_addr_random(dev->net);
+	}
+}
+
+/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
+static u32 asix_get_phyid(struct usbnet *dev)
+{
+	int phy_reg;
+	u32 phy_id;
+	int i;
+
+	/* Poll for the rare case the FW or phy isn't ready yet.  */
+	for (i = 0; i < 100; i++) {
+		phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg < 0)
+			return 0;
+		if (phy_reg != 0 && phy_reg != 0xFFFF)
+			break;
+		mdelay(1);
+	}
+
+	if (phy_reg <= 0 || phy_reg == 0xFFFF)
+		return 0;
+
+	phy_id = (phy_reg & 0xffff) << 16;
+
+	phy_reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
+	if (phy_reg < 0)
+		return 0;
+
+	phy_id |= (phy_reg & 0xffff);
+
+	return phy_id;
+}
+
+static u32 asix_get_link(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return mii_link_ok(&dev->mii);
+}
+
+static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+/* We need to override some ethtool_ops so we require our
+   own structure so we don't interfere with other usbnet
+   devices that may be connected at the same time. */
+static const struct ethtool_ops ax88172_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= asix_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
+	.nway_reset		= usbnet_nway_reset,
+	.get_link_ksettings	= usbnet_get_link_ksettings_mii,
+	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
+};
+
+static void ax88172_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u8 rx_ctl = 0x8c;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= 0x01;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		rx_ctl |= 0x02;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= 0x10;
+	}
+
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int ax88172_link_reset(struct usbnet *dev)
+{
+	u8 mode;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = AX88172_MEDIUM_DEFAULT;
+
+	if (ecmd.duplex != DUPLEX_FULL)
+		mode |= ~AX88172_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "ax88172_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
+
+	asix_write_medium_mode(dev, mode, 0);
+
+	return 0;
+}
+
+static const struct net_device_ops ax88172_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= asix_ioctl,
+	.ndo_set_rx_mode	= ax88172_set_multicast,
+};
+
+static void asix_phy_reset(struct usbnet *dev, unsigned int reset_bits)
+{
+	unsigned int timeout = 5000;
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, reset_bits);
+
+	/* give phy_id a chance to process reset */
+	udelay(500);
+
+	/* See IEEE 802.3 "22.2.4.1.1 Reset": 500ms max */
+	while (timeout--) {
+		if (asix_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR)
+							& BMCR_RESET)
+			udelay(100);
+		else
+			return;
+	}
+
+	netdev_err(dev->net, "BMCR_RESET timeout on phy_id %d\n",
+		   dev->mii.phy_id);
+}
+
+static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret = 0;
+	u8 buf[ETH_ALEN] = {0};
+	int i;
+	unsigned long gpio_bits = dev->driver_info->data;
+
+	usbnet_get_endpoints(dev,intf);
+
+	/* Toggle the GPIOs in a manufacturer/model specific way */
+	for (i = 2; i >= 0; i--) {
+		ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+				(gpio_bits >> (i * 8)) & 0xff, 0, 0, NULL, 0);
+		if (ret < 0)
+			goto out;
+		msleep(5);
+	}
+
+	ret = asix_write_rx_ctl(dev, 0x80, 0);
+	if (ret < 0)
+		goto out;
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX88172_CMD_READ_NODE_ID,
+			    0, 0, ETH_ALEN, buf, 0);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "read AX_CMD_READ_NODE_ID failed: %d\n",
+			   ret);
+		goto out;
+	}
+
+	asix_set_netdev_dev_addr(dev, buf);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
+	dev->mii.phy_id_mask = 0x3f;
+	dev->mii.reg_num_mask = 0x1f;
+
+	dev->mii.phy_id = asix_read_phy_addr(dev, true);
+	if (dev->mii.phy_id < 0)
+		return dev->mii.phy_id;
+
+	dev->net->netdev_ops = &ax88172_netdev_ops;
+	dev->net->ethtool_ops = &ax88172_ethtool_ops;
+	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
+	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
+
+	asix_phy_reset(dev, BMCR_RESET);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	mii_nway_restart(&dev->mii);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static void ax88772_ethtool_get_strings(struct net_device *netdev, u32 sset,
+					u8 *data)
+{
+	switch (sset) {
+	case ETH_SS_TEST:
+		net_selftest_get_strings(data);
+		break;
+	}
+}
+
+static int ax88772_ethtool_get_sset_count(struct net_device *ndev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_TEST:
+		return net_selftest_get_count();
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void ax88772_ethtool_get_pauseparam(struct net_device *ndev,
+					  struct ethtool_pauseparam *pause)
+{
+	struct usbnet *dev = netdev_priv(ndev);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	phylink_ethtool_get_pauseparam(priv->phylink, pause);
+}
+
+static int ax88772_ethtool_set_pauseparam(struct net_device *ndev,
+					 struct ethtool_pauseparam *pause)
+{
+	struct usbnet *dev = netdev_priv(ndev);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	return phylink_ethtool_set_pauseparam(priv->phylink, pause);
+}
+
+static const struct ethtool_ops ax88772_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= usbnet_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
+	.nway_reset		= phy_ethtool_nway_reset,
+	.get_link_ksettings	= phy_ethtool_get_link_ksettings,
+	.set_link_ksettings	= phy_ethtool_set_link_ksettings,
+	.self_test		= net_selftest,
+	.get_strings		= ax88772_ethtool_get_strings,
+	.get_sset_count		= ax88772_ethtool_get_sset_count,
+	.get_pauseparam		= ax88772_ethtool_get_pauseparam,
+	.set_pauseparam		= ax88772_ethtool_set_pauseparam,
+};
+
+static int ax88772_reset(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct asix_common_private *priv = dev->driver_priv;
+	int ret;
+
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, 0);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, 0);
+	if (ret < 0)
+		goto out;
+
+	phylink_start(priv->phylink);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct asix_common_private *priv = dev->driver_priv;
+	u16 rx_ctl;
+	int ret;
+
+	ret = asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 |
+			      AX_GPIO_GPO2EN, 5, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy,
+			     0, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+
+	if (priv->embd_phy) {
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD, in_pm);
+		if (ret < 0)
+			goto out;
+
+		usleep_range(10000, 11000);
+
+		ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+		if (ret < 0)
+			goto out;
+
+		msleep(60);
+
+		ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL,
+				    in_pm);
+		if (ret < 0)
+			goto out;
+	} else {
+		ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL,
+				    in_pm);
+		if (ret < 0)
+			goto out;
+	}
+
+	msleep(150);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))){
+		ret = -EIO;
+		goto out;
+	}
+
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+			     AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
+
+	/* Rewrite MAC address */
+	ether_addr_copy(data->mac_addr, dev->net->dev_addr);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0,
+			     ETH_ALEN, data->mac_addr, in_pm);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev, in_pm);
+	netdev_dbg(dev->net,
+		   "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct asix_common_private *priv = dev->driver_priv;
+	u16 rx_ctl, phy14h, phy15h, phy16h;
+	int ret;
+
+	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, priv->embd_phy |
+			     AX_PHYSEL_SSEN, 0, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+	usleep_range(10000, 11000);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	usleep_range(10000, 11000);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(160);
+
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPRL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	msleep(200);
+
+	if (in_pm && (!asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					   MII_PHYSID1))) {
+		ret = -1;
+		goto out;
+	}
+
+	if (priv->chipcode == AX_AX88772B_CHIPCODE) {
+		ret = asix_write_cmd(dev, AX_QCTCTRL, 0x8000, 0x8001,
+				     0, NULL, in_pm);
+		if (ret < 0) {
+			netdev_dbg(dev->net, "Write BQ setting failed: %d\n",
+				   ret);
+			goto out;
+		}
+	} else if (priv->chipcode == AX_AX88772A_CHIPCODE) {
+		/* Check if the PHY registers have default settings */
+		phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H);
+		phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H);
+		phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H);
+
+		netdev_dbg(dev->net,
+			   "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
+			   phy14h, phy15h, phy16h);
+
+		/* Restore PHY registers default setting if not */
+		if (phy14h != AX88772A_PHY14H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H,
+					     AX88772A_PHY14H_DEFAULT);
+		if (phy15h != AX88772A_PHY15H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H,
+					     AX88772A_PHY15H_DEFAULT);
+		if (phy16h != AX88772A_PHY16H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H,
+					     AX88772A_PHY16H_DEFAULT);
+	}
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+				AX88772_IPG2_DEFAULT, 0, NULL, in_pm);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr, in_pm);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT, in_pm);
+	if (ret < 0)
+		return ret;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, in_pm);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev, in_pm);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev, in_pm);
+	netdev_dbg(dev->net,
+		   "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static const struct net_device_ops ax88772_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address 	= asix_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= phy_do_ioctl_running,
+	.ndo_set_rx_mode        = asix_set_multicast,
+};
+
+static void ax88772_suspend(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+	u16 medium;
+
+	if (netif_running(dev->net)) {
+		rtnl_lock();
+		phylink_suspend(priv->phylink, false);
+		rtnl_unlock();
+	}
+
+	/* Stop MAC operation */
+	medium = asix_read_medium_status(dev, 1);
+	medium &= ~AX_MEDIUM_RE;
+	asix_write_medium_mode(dev, medium, 1);
+
+	netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
+		   asix_read_medium_status(dev, 1));
+}
+
+static int asix_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv && priv->suspend)
+		priv->suspend(dev);
+
+	return usbnet_suspend(intf, message);
+}
+
+static void ax88772_resume(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+	int i;
+
+	for (i = 0; i < 3; i++)
+		if (!priv->reset(dev, 1))
+			break;
+
+	if (netif_running(dev->net)) {
+		rtnl_lock();
+		phylink_resume(priv->phylink);
+		rtnl_unlock();
+	}
+}
+
+static int asix_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct asix_common_private *priv = dev->driver_priv;
+
+	if (priv && priv->resume)
+		priv->resume(dev);
+
+	return usbnet_resume(intf);
+}
+
+static int ax88772_init_mdio(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+	int ret;
+
+	priv->mdio = mdiobus_alloc();
+	if (!priv->mdio)
+		return -ENOMEM;
+
+	priv->mdio->priv = dev;
+	priv->mdio->read = &asix_mdio_bus_read;
+	priv->mdio->write = &asix_mdio_bus_write;
+	priv->mdio->name = "Asix MDIO Bus";
+	/* mii bus name is usb-<usb bus number>-<usb device number> */
+	snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
+		 dev->udev->bus->busnum, dev->udev->devnum);
+
+	ret = mdiobus_register(priv->mdio);
+	if (ret) {
+		netdev_err(dev->net, "Could not register MDIO bus (err %d)\n", ret);
+		mdiobus_free(priv->mdio);
+		priv->mdio = NULL;
+	}
+
+	return ret;
+}
+
+static void ax88772_mdio_unregister(struct asix_common_private *priv)
+{
+	mdiobus_unregister(priv->mdio);
+	mdiobus_free(priv->mdio);
+}
+
+static int ax88772_init_phy(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+	int ret;
+
+	priv->phydev = mdiobus_get_phy(priv->mdio, priv->phy_addr);
+	if (!priv->phydev) {
+		netdev_err(dev->net, "Could not find PHY\n");
+		return -ENODEV;
+	}
+
+	ret = phylink_connect_phy(priv->phylink, priv->phydev);
+	if (ret) {
+		netdev_err(dev->net, "Could not connect PHY\n");
+		return ret;
+	}
+
+	phy_suspend(priv->phydev);
+	priv->phydev->mac_managed_pm = 1;
+
+	phy_attached_info(priv->phydev);
+
+	if (priv->embd_phy)
+		return 0;
+
+	/* In case main PHY is not the embedded PHY and MAC is RMII clock
+	 * provider, we need to suspend embedded PHY by keeping PLL enabled
+	 * (AX_SWRESET_IPPD == 0).
+	 */
+	priv->phydev_int = mdiobus_get_phy(priv->mdio, AX_EMBD_PHY_ADDR);
+	if (!priv->phydev_int) {
+		rtnl_lock();
+		phylink_disconnect_phy(priv->phylink);
+		rtnl_unlock();
+		netdev_err(dev->net, "Could not find internal PHY\n");
+		return -ENODEV;
+	}
+
+	priv->phydev_int->mac_managed_pm = 1;
+	phy_suspend(priv->phydev_int);
+
+	return 0;
+}
+
+static void ax88772_mac_config(struct phylink_config *config, unsigned int mode,
+			      const struct phylink_link_state *state)
+{
+	/* Nothing to do */
+}
+
+static void ax88772_mac_link_down(struct phylink_config *config,
+				 unsigned int mode, phy_interface_t interface)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(config->dev));
+
+	asix_write_medium_mode(dev, 0, 0);
+	usbnet_link_change(dev, false, false);
+}
+
+static void ax88772_mac_link_up(struct phylink_config *config,
+			       struct phy_device *phy,
+			       unsigned int mode, phy_interface_t interface,
+			       int speed, int duplex,
+			       bool tx_pause, bool rx_pause)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(config->dev));
+	u16 m = AX_MEDIUM_AC | AX_MEDIUM_RE;
+
+	m |= duplex ? AX_MEDIUM_FD : 0;
+
+	switch (speed) {
+	case SPEED_100:
+		m |= AX_MEDIUM_PS;
+		break;
+	case SPEED_10:
+		break;
+	default:
+		return;
+	}
+
+	if (tx_pause)
+		m |= AX_MEDIUM_TFC;
+
+	if (rx_pause)
+		m |= AX_MEDIUM_RFC;
+
+	asix_write_medium_mode(dev, m, 0);
+	usbnet_link_change(dev, true, false);
+}
+
+static const struct phylink_mac_ops ax88772_phylink_mac_ops = {
+	.validate = phylink_generic_validate,
+	.mac_config = ax88772_mac_config,
+	.mac_link_down = ax88772_mac_link_down,
+	.mac_link_up = ax88772_mac_link_up,
+};
+
+static int ax88772_phylink_setup(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+	phy_interface_t phy_if_mode;
+	struct phylink *phylink;
+
+	priv->phylink_config.dev = &dev->net->dev;
+	priv->phylink_config.type = PHYLINK_NETDEV;
+	priv->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
+		MAC_10 | MAC_100;
+
+	__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+		  priv->phylink_config.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_RMII,
+		  priv->phylink_config.supported_interfaces);
+
+	if (priv->embd_phy)
+		phy_if_mode = PHY_INTERFACE_MODE_INTERNAL;
+	else
+		phy_if_mode = PHY_INTERFACE_MODE_RMII;
+
+	phylink = phylink_create(&priv->phylink_config, dev->net->dev.fwnode,
+				 phy_if_mode, &ax88772_phylink_mac_ops);
+	if (IS_ERR(phylink))
+		return PTR_ERR(phylink);
+
+	priv->phylink = phylink;
+	return 0;
+}
+
+static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct asix_common_private *priv;
+	u8 buf[ETH_ALEN] = {0};
+	int ret, i;
+
+	priv = devm_kzalloc(&dev->udev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev->driver_priv = priv;
+
+	usbnet_get_endpoints(dev, intf);
+
+	/* Maybe the boot loader passed the MAC address via device tree */
+	if (!eth_platform_get_mac_address(&dev->udev->dev, buf)) {
+		netif_dbg(dev, ifup, dev->net,
+			  "MAC address read from device tree");
+	} else {
+		/* Try getting the MAC address from EEPROM */
+		if (dev->driver_info->data & FLAG_EEPROM_MAC) {
+			for (i = 0; i < (ETH_ALEN >> 1); i++) {
+				ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM,
+						    0x04 + i, 0, 2, buf + i * 2,
+						    0);
+				if (ret < 0)
+					break;
+			}
+		} else {
+			ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
+					    0, 0, ETH_ALEN, buf, 0);
+		}
+
+		if (ret < 0) {
+			netdev_dbg(dev->net, "Failed to read MAC address: %d\n",
+				   ret);
+			return ret;
+		}
+	}
+
+	asix_set_netdev_dev_addr(dev, buf);
+
+	dev->net->netdev_ops = &ax88772_netdev_ops;
+	dev->net->ethtool_ops = &ax88772_ethtool_ops;
+	dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
+	dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
+
+	ret = asix_read_phy_addr(dev, true);
+	if (ret < 0)
+		return ret;
+
+	priv->phy_addr = ret;
+	priv->embd_phy = ((priv->phy_addr & 0x1f) == AX_EMBD_PHY_ADDR);
+
+	ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG, 0, 0, 1,
+			    &priv->chipcode, 0);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Failed to read STATMNGSTS_REG: %d\n", ret);
+		return ret;
+	}
+
+	priv->chipcode &= AX_CHIPCODE_MASK;
+
+	priv->resume = ax88772_resume;
+	priv->suspend = ax88772_suspend;
+	if (priv->chipcode == AX_AX88772_CHIPCODE)
+		priv->reset = ax88772_hw_reset;
+	else
+		priv->reset = ax88772a_hw_reset;
+
+	ret = priv->reset(dev, 0);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Failed to reset AX88772: %d\n", ret);
+		return ret;
+	}
+
+	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+		/* hard_mtu  is still the default - the device does not support
+		   jumbo eth frames */
+		dev->rx_urb_size = 2048;
+	}
+
+	priv->presvd_phy_bmcr = 0;
+	priv->presvd_phy_advertise = 0;
+
+	ret = ax88772_init_mdio(dev);
+	if (ret)
+		goto mdio_err;
+
+	ret = ax88772_phylink_setup(dev);
+	if (ret)
+		goto phylink_err;
+
+	ret = ax88772_init_phy(dev);
+	if (ret)
+		goto initphy_err;
+
+	return 0;
+
+initphy_err:
+	phylink_destroy(priv->phylink);
+phylink_err:
+	ax88772_mdio_unregister(priv);
+mdio_err:
+	return ret;
+}
+
+static int ax88772_stop(struct usbnet *dev)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	phylink_stop(priv->phylink);
+
+	return 0;
+}
+
+static void ax88772_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct asix_common_private *priv = dev->driver_priv;
+
+	rtnl_lock();
+	phylink_disconnect_phy(priv->phylink);
+	rtnl_unlock();
+	phylink_destroy(priv->phylink);
+	ax88772_mdio_unregister(priv);
+	asix_rx_fixup_common_free(dev->driver_priv);
+}
+
+static void ax88178_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	asix_rx_fixup_common_free(dev->driver_priv);
+	kfree(dev->driver_priv);
+}
+
+static const struct ethtool_ops ax88178_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= asix_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
+	.nway_reset		= usbnet_nway_reset,
+	.get_link_ksettings	= usbnet_get_link_ksettings_mii,
+	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
+};
+
+static int marvell_phy_init(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u16 reg;
+
+	netdev_dbg(dev->net, "marvell_phy_init()\n");
+
+	reg = asix_mdio_read(dev->net, dev->mii.phy_id, MII_MARVELL_STATUS);
+	netdev_dbg(dev->net, "MII_MARVELL_STATUS = 0x%04x\n", reg);
+
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_MARVELL_CTRL,
+			MARVELL_CTRL_RXDELAY | MARVELL_CTRL_TXDELAY);
+
+	if (data->ledmode) {
+		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+			MII_MARVELL_LED_CTRL);
+		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (1) = 0x%04x\n", reg);
+
+		reg &= 0xf8ff;
+		reg |= (1 + 0x0100);
+		asix_mdio_write(dev->net, dev->mii.phy_id,
+			MII_MARVELL_LED_CTRL, reg);
+
+		reg = asix_mdio_read(dev->net, dev->mii.phy_id,
+			MII_MARVELL_LED_CTRL);
+		netdev_dbg(dev->net, "MII_MARVELL_LED_CTRL (2) = 0x%04x\n", reg);
+	}
+
+	return 0;
+}
+
+static int rtl8211cl_phy_init(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+
+	netdev_dbg(dev->net, "rtl8211cl_phy_init()\n");
+
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0005);
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x0c, 0);
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x01,
+		asix_mdio_read (dev->net, dev->mii.phy_id, 0x01) | 0x0080);
+	asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
+
+	if (data->ledmode == 12) {
+		asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0x0002);
+		asix_mdio_write (dev->net, dev->mii.phy_id, 0x1a, 0x00cb);
+		asix_mdio_write (dev->net, dev->mii.phy_id, 0x1f, 0);
+	}
+
+	return 0;
+}
+
+static int marvell_led_status(struct usbnet *dev, u16 speed)
+{
+	u16 reg = asix_mdio_read(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL);
+
+	netdev_dbg(dev->net, "marvell_led_status() read 0x%04x\n", reg);
+
+	/* Clear out the center LED bits - 0x03F0 */
+	reg &= 0xfc0f;
+
+	switch (speed) {
+		case SPEED_1000:
+			reg |= 0x03e0;
+			break;
+		case SPEED_100:
+			reg |= 0x03b0;
+			break;
+		default:
+			reg |= 0x02f0;
+	}
+
+	netdev_dbg(dev->net, "marvell_led_status() writing 0x%04x\n", reg);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MARVELL_LED_MANUAL, reg);
+
+	return 0;
+}
+
+static int ax88178_reset(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	int ret;
+	__le16 eeprom;
+	u8 status;
+	int gpio0 = 0;
+	u32 phyid;
+
+	ret = asix_read_cmd(dev, AX_CMD_READ_GPIOS, 0, 0, 1, &status, 0);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Failed to read GPIOS: %d\n", ret);
+		return ret;
+	}
+
+	netdev_dbg(dev->net, "GPIO Status: 0x%04x\n", status);
+
+	asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0, 0, 0, NULL, 0);
+	ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, 0x0017, 0, 2, &eeprom, 0);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Failed to read EEPROM: %d\n", ret);
+		return ret;
+	}
+
+	asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0, 0, 0, NULL, 0);
+
+	netdev_dbg(dev->net, "EEPROM index 0x17 is 0x%04x\n", eeprom);
+
+	if (eeprom == cpu_to_le16(0xffff)) {
+		data->phymode = PHY_MODE_MARVELL;
+		data->ledmode = 0;
+		gpio0 = 1;
+	} else {
+		data->phymode = le16_to_cpu(eeprom) & 0x7F;
+		data->ledmode = le16_to_cpu(eeprom) >> 8;
+		gpio0 = (le16_to_cpu(eeprom) & 0x80) ? 0 : 1;
+	}
+	netdev_dbg(dev->net, "GPIO0: %d, PhyMode: %d\n", gpio0, data->phymode);
+
+	/* Power up external GigaPHY through AX88178 GPIO pin */
+	asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_1 |
+			AX_GPIO_GPO1EN, 40, 0);
+	if ((le16_to_cpu(eeprom) >> 8) != 1) {
+		asix_write_gpio(dev, 0x003c, 30, 0);
+		asix_write_gpio(dev, 0x001c, 300, 0);
+		asix_write_gpio(dev, 0x003c, 30, 0);
+	} else {
+		netdev_dbg(dev->net, "gpio phymode == 1 path\n");
+		asix_write_gpio(dev, AX_GPIO_GPO1EN, 30, 0);
+		asix_write_gpio(dev, AX_GPIO_GPO1EN | AX_GPIO_GPO_1, 30, 0);
+	}
+
+	/* Read PHYID register *AFTER* powering up PHY */
+	phyid = asix_get_phyid(dev);
+	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
+
+	/* Set AX88178 to enable MII/GMII/RGMII interface for external PHY */
+	asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, 0, 0, 0, NULL, 0);
+
+	asix_sw_reset(dev, 0, 0);
+	msleep(150);
+
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
+	msleep(150);
+
+	asix_write_rx_ctl(dev, 0, 0);
+
+	if (data->phymode == PHY_MODE_MARVELL) {
+		marvell_phy_init(dev);
+		msleep(60);
+	} else if (data->phymode == PHY_MODE_RTL8211CL)
+		rtl8211cl_phy_init(dev);
+
+	asix_phy_reset(dev, BMCR_RESET | BMCR_ANENABLE);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+			ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	asix_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
+			ADVERTISE_1000FULL);
+
+	asix_write_medium_mode(dev, AX88178_MEDIUM_DEFAULT, 0);
+	mii_nway_restart(&dev->mii);
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ax88178_link_reset(struct usbnet *dev)
+{
+	u16 mode;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u32 speed;
+
+	netdev_dbg(dev->net, "ax88178_link_reset()\n");
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = AX88178_MEDIUM_DEFAULT;
+	speed = ethtool_cmd_speed(&ecmd);
+
+	if (speed == SPEED_1000)
+		mode |= AX_MEDIUM_GM;
+	else if (speed == SPEED_100)
+		mode |= AX_MEDIUM_PS;
+	else
+		mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
+
+	mode |= AX_MEDIUM_ENCK;
+
+	if (ecmd.duplex == DUPLEX_FULL)
+		mode |= AX_MEDIUM_FD;
+	else
+		mode &= ~AX_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "ax88178_link_reset() speed: %u duplex: %d setting mode to 0x%04x\n",
+		   speed, ecmd.duplex, mode);
+
+	asix_write_medium_mode(dev, mode, 0);
+
+	if (data->phymode == PHY_MODE_MARVELL && data->ledmode)
+		marvell_led_status(dev, speed);
+
+	return 0;
+}
+
+static void ax88178_set_mfb(struct usbnet *dev)
+{
+	u16 mfb = AX_RX_CTL_MFB_16384;
+	u16 rxctl;
+	u16 medium;
+	int old_rx_urb_size = dev->rx_urb_size;
+
+	if (dev->hard_mtu < 2048) {
+		dev->rx_urb_size = 2048;
+		mfb = AX_RX_CTL_MFB_2048;
+	} else if (dev->hard_mtu < 4096) {
+		dev->rx_urb_size = 4096;
+		mfb = AX_RX_CTL_MFB_4096;
+	} else if (dev->hard_mtu < 8192) {
+		dev->rx_urb_size = 8192;
+		mfb = AX_RX_CTL_MFB_8192;
+	} else if (dev->hard_mtu < 16384) {
+		dev->rx_urb_size = 16384;
+		mfb = AX_RX_CTL_MFB_16384;
+	}
+
+	rxctl = asix_read_rx_ctl(dev, 0);
+	asix_write_rx_ctl(dev, (rxctl & ~AX_RX_CTL_MFB_16384) | mfb, 0);
+
+	medium = asix_read_medium_status(dev, 0);
+	if (dev->net->mtu > 1500)
+		medium |= AX_MEDIUM_JFE;
+	else
+		medium &= ~AX_MEDIUM_JFE;
+	asix_write_medium_mode(dev, medium, 0);
+
+	if (dev->rx_urb_size > old_rx_urb_size)
+		usbnet_unlink_rx_urbs(dev);
+}
+
+static int ax88178_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(net);
+	int ll_mtu = new_mtu + net->hard_header_len + 4;
+
+	netdev_dbg(dev->net, "ax88178_change_mtu() new_mtu=%d\n", new_mtu);
+
+	if ((ll_mtu % dev->maxpacket) == 0)
+		return -EDOM;
+
+	net->mtu = new_mtu;
+	dev->hard_mtu = net->mtu + net->hard_header_len;
+	ax88178_set_mfb(dev);
+
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
+
+	return 0;
+}
+
+static const struct net_device_ops ax88178_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address 	= asix_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_rx_mode	= asix_set_multicast,
+	.ndo_eth_ioctl		= asix_ioctl,
+	.ndo_change_mtu 	= ax88178_change_mtu,
+};
+
+static int ax88178_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	u8 buf[ETH_ALEN] = {0};
+
+	usbnet_get_endpoints(dev,intf);
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
+		return ret;
+	}
+
+	asix_set_netdev_dev_addr(dev, buf);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0xff;
+	dev->mii.supports_gmii = 1;
+
+	dev->mii.phy_id = asix_read_phy_addr(dev, true);
+	if (dev->mii.phy_id < 0)
+		return dev->mii.phy_id;
+
+	dev->net->netdev_ops = &ax88178_netdev_ops;
+	dev->net->ethtool_ops = &ax88178_ethtool_ops;
+	dev->net->max_mtu = 16384 - (dev->net->hard_header_len + 4);
+
+	/* Blink LEDS so users know driver saw dongle */
+	asix_sw_reset(dev, 0, 0);
+	msleep(150);
+
+	asix_sw_reset(dev, AX_SWRESET_PRL | AX_SWRESET_IPPD, 0);
+	msleep(150);
+
+	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+		/* hard_mtu  is still the default - the device does not support
+		   jumbo eth frames */
+		dev->rx_urb_size = 2048;
+	}
+
+	dev->driver_priv = kzalloc(sizeof(struct asix_common_private), GFP_KERNEL);
+	if (!dev->driver_priv)
+			return -ENOMEM;
+
+	return 0;
+}
+
+static const struct driver_info ax8817x_info = {
+	.description = "ASIX AX8817x USB 2.0 Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x00130103,
+};
+
+static const struct driver_info dlink_dub_e100_info = {
+	.description = "DLink DUB-E100 USB Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x009f9d9f,
+};
+
+static const struct driver_info netgear_fa120_info = {
+	.description = "Netgear FA-120 USB Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x00130103,
+};
+
+static const struct driver_info hawking_uf200_info = {
+	.description = "Hawking UF200 USB Ethernet",
+	.bind = ax88172_bind,
+	.status = asix_status,
+	.link_reset = ax88172_link_reset,
+	.reset = ax88172_link_reset,
+	.flags =  FLAG_ETHER | FLAG_LINK_INTR,
+	.data = 0x001f1d1f,
+};
+
+static const struct driver_info ax88772_info = {
+	.description = "ASIX AX88772 USB 2.0 Ethernet",
+	.bind = ax88772_bind,
+	.unbind = ax88772_unbind,
+	.status = asix_status,
+	.reset = ax88772_reset,
+	.stop = ax88772_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup_common,
+	.tx_fixup = asix_tx_fixup,
+};
+
+static const struct driver_info ax88772b_info = {
+	.description = "ASIX AX88772B USB 2.0 Ethernet",
+	.bind = ax88772_bind,
+	.unbind = ax88772_unbind,
+	.status = asix_status,
+	.reset = ax88772_reset,
+	.stop = ax88772_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+	         FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup_common,
+	.tx_fixup = asix_tx_fixup,
+	.data = FLAG_EEPROM_MAC,
+};
+
+static const struct driver_info ax88178_info = {
+	.description = "ASIX AX88178 USB 2.0 Ethernet",
+	.bind = ax88178_bind,
+	.unbind = ax88178_unbind,
+	.status = asix_status,
+	.link_reset = ax88178_link_reset,
+	.reset = ax88178_reset,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+		 FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup_common,
+	.tx_fixup = asix_tx_fixup,
+};
+
+/*
+ * USBLINK 20F9 "USB 2.0 LAN" USB ethernet adapter, typically found in
+ * no-name packaging.
+ * USB device strings are:
+ *   1: Manufacturer: USBLINK
+ *   2: Product: HG20F9 USB2.0
+ *   3: Serial: 000003
+ * Appears to be compatible with Asix 88772B.
+ */
+static const struct driver_info hg20f9_info = {
+	.description = "HG20F9 USB 2.0 Ethernet",
+	.bind = ax88772_bind,
+	.unbind = ax88772_unbind,
+	.status = asix_status,
+	.reset = ax88772_reset,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+	         FLAG_MULTI_PACKET,
+	.rx_fixup = asix_rx_fixup_common,
+	.tx_fixup = asix_tx_fixup,
+	.data = FLAG_EEPROM_MAC,
+};
+
+static const struct usb_device_id	products [] = {
+{
+	// Linksys USB200M
+	USB_DEVICE (0x077b, 0x2226),
+	.driver_info =	(unsigned long) &ax8817x_info,
+}, {
+	// Netgear FA120
+	USB_DEVICE (0x0846, 0x1040),
+	.driver_info =  (unsigned long) &netgear_fa120_info,
+}, {
+	// DLink DUB-E100
+	USB_DEVICE (0x2001, 0x1a00),
+	.driver_info =  (unsigned long) &dlink_dub_e100_info,
+}, {
+	// Intellinet, ST Lab USB Ethernet
+	USB_DEVICE (0x0b95, 0x1720),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Hawking UF200, TrendNet TU2-ET100
+	USB_DEVICE (0x07b8, 0x420a),
+	.driver_info =  (unsigned long) &hawking_uf200_info,
+}, {
+	// Billionton Systems, USB2AR
+	USB_DEVICE (0x08dd, 0x90ff),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Billionton Systems, GUSB2AM-1G-B
+	USB_DEVICE(0x08dd, 0x0114),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
+	// ATEN UC210T
+	USB_DEVICE (0x0557, 0x2009),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Buffalo LUA-U2-KTX
+	USB_DEVICE (0x0411, 0x003d),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Buffalo LUA-U2-GT 10/100/1000
+	USB_DEVICE (0x0411, 0x006e),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
+	// Sitecom LN-029 "USB 2.0 10/100 Ethernet adapter"
+	USB_DEVICE (0x6189, 0x182d),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Sitecom LN-031 "USB 2.0 10/100/1000 Ethernet adapter"
+	USB_DEVICE (0x0df6, 0x0056),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
+	// Sitecom LN-028 "USB 2.0 10/100/1000 Ethernet adapter"
+	USB_DEVICE (0x0df6, 0x061c),
+	.driver_info =  (unsigned long) &ax88178_info,
+}, {
+	// corega FEther USB2-TX
+	USB_DEVICE (0x07aa, 0x0017),
+	.driver_info =  (unsigned long) &ax8817x_info,
+}, {
+	// Surecom EP-1427X-2
+	USB_DEVICE (0x1189, 0x0893),
+	.driver_info = (unsigned long) &ax8817x_info,
+}, {
+	// goodway corp usb gwusb2e
+	USB_DEVICE (0x1631, 0x6200),
+	.driver_info = (unsigned long) &ax8817x_info,
+}, {
+	// JVC MP-PRX1 Port Replicator
+	USB_DEVICE (0x04f1, 0x3008),
+	.driver_info = (unsigned long) &ax8817x_info,
+}, {
+	// Lenovo U2L100P 10/100
+	USB_DEVICE (0x17ef, 0x7203),
+	.driver_info = (unsigned long)&ax88772b_info,
+}, {
+	// ASIX AX88772B 10/100
+	USB_DEVICE (0x0b95, 0x772b),
+	.driver_info = (unsigned long) &ax88772b_info,
+}, {
+	// ASIX AX88772 10/100
+	USB_DEVICE (0x0b95, 0x7720),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// ASIX AX88178 10/100/1000
+	USB_DEVICE (0x0b95, 0x1780),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Logitec LAN-GTJ/U2A
+	USB_DEVICE (0x0789, 0x0160),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Linksys USB200M Rev 2
+	USB_DEVICE (0x13b1, 0x0018),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// 0Q0 cable ethernet
+	USB_DEVICE (0x1557, 0x7720),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// DLink DUB-E100 H/W Ver B1
+	USB_DEVICE (0x07d1, 0x3c05),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// DLink DUB-E100 H/W Ver B1 Alternate
+	USB_DEVICE (0x2001, 0x3c05),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+       // DLink DUB-E100 H/W Ver C1
+       USB_DEVICE (0x2001, 0x1a02),
+       .driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Linksys USB1000
+	USB_DEVICE (0x1737, 0x0039),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// IO-DATA ETG-US2
+	USB_DEVICE (0x04bb, 0x0930),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Belkin F5D5055
+	USB_DEVICE(0x050d, 0x5055),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// Apple USB Ethernet Adapter
+	USB_DEVICE(0x05ac, 0x1402),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Cables-to-Go USB Ethernet Adapter
+	USB_DEVICE(0x0b95, 0x772a),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// ABOCOM for pci
+	USB_DEVICE(0x14ea, 0xab11),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
+	// ASIX 88772a
+	USB_DEVICE(0x0db0, 0xa877),
+	.driver_info = (unsigned long) &ax88772_info,
+}, {
+	// Asus USB Ethernet Adapter
+	USB_DEVICE (0x0b95, 0x7e2b),
+	.driver_info = (unsigned long)&ax88772b_info,
+}, {
+	/* ASIX 88172a demo board */
+	USB_DEVICE(0x0b95, 0x172a),
+	.driver_info = (unsigned long) &ax88172a_info,
+}, {
+	/*
+	 * USBLINK HG20F9 "USB 2.0 LAN"
+	 * Appears to have gazumped Linksys's manufacturer ID but
+	 * doesn't (yet) conflict with any known Linksys product.
+	 */
+	USB_DEVICE(0x066b, 0x20f9),
+	.driver_info = (unsigned long) &hg20f9_info,
+},
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver asix_driver = {
+	.name =		DRIVER_NAME,
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.suspend =	asix_suspend,
+	.resume =	asix_resume,
+	.reset_resume =	asix_resume,
+	.disconnect =	usbnet_disconnect,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(asix_driver);
+
+MODULE_AUTHOR("David Hollis");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_DESCRIPTION("ASIX AX8817X based USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/net/usb/ax88172a.c b/drivers/net/usb/ax88172a.c
new file mode 100644
index 000000000..e47bb1250
--- /dev/null
+++ b/drivers/net/usb/ax88172a.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ASIX AX88172A based USB 2.0 Ethernet Devices
+ * Copyright (C) 2012 OMICRON electronics GmbH
+ *
+ * Supports external PHYs via phylib. Based on the driver for the
+ * AX88772. Original copyrights follow:
+ *
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ */
+
+#include "asix.h"
+#include <linux/phy.h>
+
+struct ax88172a_private {
+	struct mii_bus *mdio;
+	struct phy_device *phydev;
+	char phy_name[20];
+	u16 phy_addr;
+	u16 oldmode;
+	int use_embdphy;
+	struct asix_rx_fixup_info rx_fixup_info;
+};
+
+/* set MAC link settings according to information from phylib */
+static void ax88172a_adjust_link(struct net_device *netdev)
+{
+	struct phy_device *phydev = netdev->phydev;
+	struct usbnet *dev = netdev_priv(netdev);
+	struct ax88172a_private *priv = dev->driver_priv;
+	u16 mode = 0;
+
+	if (phydev->link) {
+		mode = AX88772_MEDIUM_DEFAULT;
+
+		if (phydev->duplex == DUPLEX_HALF)
+			mode &= ~AX_MEDIUM_FD;
+
+		if (phydev->speed != SPEED_100)
+			mode &= ~AX_MEDIUM_PS;
+	}
+
+	if (mode != priv->oldmode) {
+		asix_write_medium_mode(dev, mode, 0);
+		priv->oldmode = mode;
+		netdev_dbg(netdev, "speed %u duplex %d, setting mode to 0x%04x\n",
+			   phydev->speed, phydev->duplex, mode);
+		phy_print_status(phydev);
+	}
+}
+
+static void ax88172a_status(struct usbnet *dev, struct urb *urb)
+{
+	/* link changes are detected by polling the phy */
+}
+
+/* use phylib infrastructure */
+static int ax88172a_init_mdio(struct usbnet *dev)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+	int ret;
+
+	priv->mdio = mdiobus_alloc();
+	if (!priv->mdio) {
+		netdev_err(dev->net, "Could not allocate MDIO bus\n");
+		return -ENOMEM;
+	}
+
+	priv->mdio->priv = (void *)dev;
+	priv->mdio->read = &asix_mdio_bus_read;
+	priv->mdio->write = &asix_mdio_bus_write;
+	priv->mdio->name = "Asix MDIO Bus";
+	/* mii bus name is usb-<usb bus number>-<usb device number> */
+	snprintf(priv->mdio->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
+		 dev->udev->bus->busnum, dev->udev->devnum);
+
+	ret = mdiobus_register(priv->mdio);
+	if (ret) {
+		netdev_err(dev->net, "Could not register MDIO bus\n");
+		goto mfree;
+	}
+
+	netdev_info(dev->net, "registered mdio bus %s\n", priv->mdio->id);
+	return 0;
+
+mfree:
+	mdiobus_free(priv->mdio);
+	return ret;
+}
+
+static void ax88172a_remove_mdio(struct usbnet *dev)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+
+	netdev_info(dev->net, "deregistering mdio bus %s\n", priv->mdio->id);
+	mdiobus_unregister(priv->mdio);
+	mdiobus_free(priv->mdio);
+}
+
+static const struct net_device_ops ax88172a_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address	= asix_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= phy_do_ioctl_running,
+	.ndo_set_rx_mode        = asix_set_multicast,
+};
+
+static const struct ethtool_ops ax88172a_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
+	.get_link		= usbnet_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.set_eeprom		= asix_set_eeprom,
+	.nway_reset		= phy_ethtool_nway_reset,
+	.get_link_ksettings	= phy_ethtool_get_link_ksettings,
+	.set_link_ksettings	= phy_ethtool_set_link_ksettings,
+};
+
+static int ax88172a_reset_phy(struct usbnet *dev, int embd_phy)
+{
+	int ret;
+
+	ret = asix_sw_reset(dev, AX_SWRESET_IPPD, 0);
+	if (ret < 0)
+		goto err;
+
+	msleep(150);
+	ret = asix_sw_reset(dev, AX_SWRESET_CLEAR, 0);
+	if (ret < 0)
+		goto err;
+
+	msleep(150);
+
+	ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_IPPD,
+			    0);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+
+err:
+	return ret;
+}
+
+
+static int ax88172a_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	u8 buf[ETH_ALEN];
+	struct ax88172a_private *priv;
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		return ret;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev->driver_priv = priv;
+
+	/* Get the MAC address */
+	ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf, 0);
+	if (ret < ETH_ALEN) {
+		netdev_err(dev->net, "Failed to read MAC address: %d\n", ret);
+		ret = -EIO;
+		goto free;
+	}
+	eth_hw_addr_set(dev->net, buf);
+
+	dev->net->netdev_ops = &ax88172a_netdev_ops;
+	dev->net->ethtool_ops = &ax88172a_ethtool_ops;
+
+	/* are we using the internal or the external phy? */
+	ret = asix_read_cmd(dev, AX_CMD_SW_PHY_STATUS, 0, 0, 1, buf, 0);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to read software interface selection register: %d\n",
+			   ret);
+		goto free;
+	}
+
+	netdev_dbg(dev->net, "AX_CMD_SW_PHY_STATUS = 0x%02x\n", buf[0]);
+	switch (buf[0] & AX_PHY_SELECT_MASK) {
+	case AX_PHY_SELECT_INTERNAL:
+		netdev_dbg(dev->net, "use internal phy\n");
+		priv->use_embdphy = 1;
+		break;
+	case AX_PHY_SELECT_EXTERNAL:
+		netdev_dbg(dev->net, "use external phy\n");
+		priv->use_embdphy = 0;
+		break;
+	default:
+		netdev_err(dev->net, "Interface mode not supported by driver\n");
+		ret = -ENOTSUPP;
+		goto free;
+	}
+
+	ret = asix_read_phy_addr(dev, priv->use_embdphy);
+	if (ret < 0)
+		goto free;
+
+	priv->phy_addr = ret;
+
+	ax88172a_reset_phy(dev, priv->use_embdphy);
+
+	/* Asix framing packs multiple eth frames into a 2K usb bulk transfer */
+	if (dev->driver_info->flags & FLAG_FRAMING_AX) {
+		/* hard_mtu  is still the default - the device does not support
+		   jumbo eth frames */
+		dev->rx_urb_size = 2048;
+	}
+
+	/* init MDIO bus */
+	ret = ax88172a_init_mdio(dev);
+	if (ret)
+		goto free;
+
+	return 0;
+
+free:
+	kfree(priv);
+	return ret;
+}
+
+static int ax88172a_stop(struct usbnet *dev)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+
+	netdev_dbg(dev->net, "Stopping interface\n");
+
+	if (priv->phydev) {
+		netdev_info(dev->net, "Disconnecting from phy %s\n",
+			    priv->phy_name);
+		phy_stop(priv->phydev);
+		phy_disconnect(priv->phydev);
+	}
+
+	return 0;
+}
+
+static void ax88172a_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct ax88172a_private *priv = dev->driver_priv;
+
+	ax88172a_remove_mdio(dev);
+	kfree(priv);
+}
+
+static int ax88172a_reset(struct usbnet *dev)
+{
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct ax88172a_private *priv = dev->driver_priv;
+	int ret;
+	u16 rx_ctl;
+
+	ax88172a_reset_phy(dev, priv->use_embdphy);
+
+	msleep(150);
+	rx_ctl = asix_read_rx_ctl(dev, 0);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+	ret = asix_write_rx_ctl(dev, 0x0000, 0);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev, 0);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+	msleep(150);
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
+			     AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
+			     AX88772_IPG2_DEFAULT, 0, NULL, 0);
+	if (ret < 0) {
+		netdev_err(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+			     data->mac_addr, 0);
+	if (ret < 0)
+		goto out;
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL, 0);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = asix_read_rx_ctl(dev, 0);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = asix_read_medium_status(dev, 0);
+	netdev_dbg(dev->net, "Medium Status is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	/* Connect to PHY */
+	snprintf(priv->phy_name, 20, PHY_ID_FMT,
+		 priv->mdio->id, priv->phy_addr);
+
+	priv->phydev = phy_connect(dev->net, priv->phy_name,
+				   &ax88172a_adjust_link,
+				   PHY_INTERFACE_MODE_MII);
+	if (IS_ERR(priv->phydev)) {
+		netdev_err(dev->net, "Could not connect to PHY device %s\n",
+			   priv->phy_name);
+		ret = PTR_ERR(priv->phydev);
+		goto out;
+	}
+
+	netdev_info(dev->net, "Connected to phy %s\n", priv->phy_name);
+
+	/* During power-up, the AX88172A set the power down (BMCR_PDOWN)
+	 * bit of the PHY. Bring the PHY up again.
+	 */
+	genphy_resume(priv->phydev);
+	phy_start(priv->phydev);
+
+	return 0;
+
+out:
+	return ret;
+
+}
+
+static int ax88172a_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct ax88172a_private *dp = dev->driver_priv;
+	struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
+
+	return asix_rx_fixup_internal(dev, skb, rx);
+}
+
+const struct driver_info ax88172a_info = {
+	.description = "ASIX AX88172A USB 2.0 Ethernet",
+	.bind = ax88172a_bind,
+	.reset = ax88172a_reset,
+	.stop = ax88172a_stop,
+	.unbind = ax88172a_unbind,
+	.status = ax88172a_status,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+		 FLAG_MULTI_PACKET,
+	.rx_fixup = ax88172a_rx_fixup,
+	.tx_fixup = asix_tx_fixup,
+};
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
new file mode 100644
index 000000000..5a1bf42ce
--- /dev/null
+++ b/drivers/net/usb/ax88179_178a.c
@@ -0,0 +1,1934 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet Devices
+ *
+ * Copyright (C) 2011-2013 ASIX
+ */
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <uapi/linux/mdio.h>
+#include <linux/mdio.h>
+
+#define AX88179_PHY_ID				0x03
+#define AX_EEPROM_LEN				0x100
+#define AX88179_EEPROM_MAGIC			0x17900b95
+#define AX_MCAST_FLTSIZE			8
+#define AX_MAX_MCAST				64
+#define AX_INT_PPLS_LINK			((u32)BIT(16))
+#define AX_RXHDR_L4_TYPE_MASK			0x1c
+#define AX_RXHDR_L4_TYPE_UDP			4
+#define AX_RXHDR_L4_TYPE_TCP			16
+#define AX_RXHDR_L3CSUM_ERR			2
+#define AX_RXHDR_L4CSUM_ERR			1
+#define AX_RXHDR_CRC_ERR			((u32)BIT(29))
+#define AX_RXHDR_DROP_ERR			((u32)BIT(31))
+#define AX_ACCESS_MAC				0x01
+#define AX_ACCESS_PHY				0x02
+#define AX_ACCESS_EEPROM			0x04
+#define AX_ACCESS_EFUS				0x05
+#define AX_RELOAD_EEPROM_EFUSE			0x06
+#define AX_PAUSE_WATERLVL_HIGH			0x54
+#define AX_PAUSE_WATERLVL_LOW			0x55
+
+#define PHYSICAL_LINK_STATUS			0x02
+	#define	AX_USB_SS		0x04
+	#define	AX_USB_HS		0x02
+
+#define GENERAL_STATUS				0x03
+/* Check AX88179 version. UA1:Bit2 = 0,  UA2:Bit2 = 1 */
+	#define	AX_SECLD		0x04
+
+#define AX_SROM_ADDR				0x07
+#define AX_SROM_CMD				0x0a
+	#define EEP_RD			0x04
+	#define EEP_BUSY		0x10
+
+#define AX_SROM_DATA_LOW			0x08
+#define AX_SROM_DATA_HIGH			0x09
+
+#define AX_RX_CTL				0x0b
+	#define AX_RX_CTL_DROPCRCERR	0x0100
+	#define AX_RX_CTL_IPE		0x0200
+	#define AX_RX_CTL_START		0x0080
+	#define AX_RX_CTL_AP		0x0020
+	#define AX_RX_CTL_AM		0x0010
+	#define AX_RX_CTL_AB		0x0008
+	#define AX_RX_CTL_AMALL		0x0002
+	#define AX_RX_CTL_PRO		0x0001
+	#define AX_RX_CTL_STOP		0x0000
+
+#define AX_NODE_ID				0x10
+#define AX_MULFLTARY				0x16
+
+#define AX_MEDIUM_STATUS_MODE			0x22
+	#define AX_MEDIUM_GIGAMODE	0x01
+	#define AX_MEDIUM_FULL_DUPLEX	0x02
+	#define AX_MEDIUM_EN_125MHZ	0x08
+	#define AX_MEDIUM_RXFLOW_CTRLEN	0x10
+	#define AX_MEDIUM_TXFLOW_CTRLEN	0x20
+	#define AX_MEDIUM_RECEIVE_EN	0x100
+	#define AX_MEDIUM_PS		0x200
+	#define AX_MEDIUM_JUMBO_EN	0x8040
+
+#define AX_MONITOR_MOD				0x24
+	#define AX_MONITOR_MODE_RWLC	0x02
+	#define AX_MONITOR_MODE_RWMP	0x04
+	#define AX_MONITOR_MODE_PMEPOL	0x20
+	#define AX_MONITOR_MODE_PMETYPE	0x40
+
+#define AX_GPIO_CTRL				0x25
+	#define AX_GPIO_CTRL_GPIO3EN	0x80
+	#define AX_GPIO_CTRL_GPIO2EN	0x40
+	#define AX_GPIO_CTRL_GPIO1EN	0x20
+
+#define AX_PHYPWR_RSTCTL			0x26
+	#define AX_PHYPWR_RSTCTL_BZ	0x0010
+	#define AX_PHYPWR_RSTCTL_IPRL	0x0020
+	#define AX_PHYPWR_RSTCTL_AT	0x1000
+
+#define AX_RX_BULKIN_QCTRL			0x2e
+#define AX_CLK_SELECT				0x33
+	#define AX_CLK_SELECT_BCS	0x01
+	#define AX_CLK_SELECT_ACS	0x02
+	#define AX_CLK_SELECT_ULR	0x08
+
+#define AX_RXCOE_CTL				0x34
+	#define AX_RXCOE_IP		0x01
+	#define AX_RXCOE_TCP		0x02
+	#define AX_RXCOE_UDP		0x04
+	#define AX_RXCOE_TCPV6		0x20
+	#define AX_RXCOE_UDPV6		0x40
+
+#define AX_TXCOE_CTL				0x35
+	#define AX_TXCOE_IP		0x01
+	#define AX_TXCOE_TCP		0x02
+	#define AX_TXCOE_UDP		0x04
+	#define AX_TXCOE_TCPV6		0x20
+	#define AX_TXCOE_UDPV6		0x40
+
+#define AX_LEDCTRL				0x73
+
+#define GMII_PHY_PHYSR				0x11
+	#define GMII_PHY_PHYSR_SMASK	0xc000
+	#define GMII_PHY_PHYSR_GIGA	0x8000
+	#define GMII_PHY_PHYSR_100	0x4000
+	#define GMII_PHY_PHYSR_FULL	0x2000
+	#define GMII_PHY_PHYSR_LINK	0x400
+
+#define GMII_LED_ACT				0x1a
+	#define	GMII_LED_ACTIVE_MASK	0xff8f
+	#define	GMII_LED0_ACTIVE	BIT(4)
+	#define	GMII_LED1_ACTIVE	BIT(5)
+	#define	GMII_LED2_ACTIVE	BIT(6)
+
+#define GMII_LED_LINK				0x1c
+	#define	GMII_LED_LINK_MASK	0xf888
+	#define	GMII_LED0_LINK_10	BIT(0)
+	#define	GMII_LED0_LINK_100	BIT(1)
+	#define	GMII_LED0_LINK_1000	BIT(2)
+	#define	GMII_LED1_LINK_10	BIT(4)
+	#define	GMII_LED1_LINK_100	BIT(5)
+	#define	GMII_LED1_LINK_1000	BIT(6)
+	#define	GMII_LED2_LINK_10	BIT(8)
+	#define	GMII_LED2_LINK_100	BIT(9)
+	#define	GMII_LED2_LINK_1000	BIT(10)
+	#define	LED0_ACTIVE		BIT(0)
+	#define	LED0_LINK_10		BIT(1)
+	#define	LED0_LINK_100		BIT(2)
+	#define	LED0_LINK_1000		BIT(3)
+	#define	LED0_FD			BIT(4)
+	#define	LED0_USB3_MASK		0x001f
+	#define	LED1_ACTIVE		BIT(5)
+	#define	LED1_LINK_10		BIT(6)
+	#define	LED1_LINK_100		BIT(7)
+	#define	LED1_LINK_1000		BIT(8)
+	#define	LED1_FD			BIT(9)
+	#define	LED1_USB3_MASK		0x03e0
+	#define	LED2_ACTIVE		BIT(10)
+	#define	LED2_LINK_1000		BIT(13)
+	#define	LED2_LINK_100		BIT(12)
+	#define	LED2_LINK_10		BIT(11)
+	#define	LED2_FD			BIT(14)
+	#define	LED_VALID		BIT(15)
+	#define	LED2_USB3_MASK		0x7c00
+
+#define GMII_PHYPAGE				0x1e
+#define GMII_PHY_PAGE_SELECT			0x1f
+	#define GMII_PHY_PGSEL_EXT	0x0007
+	#define GMII_PHY_PGSEL_PAGE0	0x0000
+	#define GMII_PHY_PGSEL_PAGE3	0x0003
+	#define GMII_PHY_PGSEL_PAGE5	0x0005
+
+static int ax88179_reset(struct usbnet *dev);
+
+struct ax88179_data {
+	u8  eee_enabled;
+	u8  eee_active;
+	u16 rxctl;
+	u8 in_pm;
+	u32 wol_supported;
+	u32 wolopts;
+	u8 disconnecting;
+};
+
+struct ax88179_int_data {
+	__le32 intdata1;
+	__le32 intdata2;
+};
+
+static const struct {
+	unsigned char ctrl, timer_l, timer_h, size, ifg;
+} AX88179_BULKIN_SIZE[] =	{
+	{7, 0x4f, 0,	0x12, 0xff},
+	{7, 0x20, 3,	0x16, 0xff},
+	{7, 0xae, 7,	0x18, 0xff},
+	{7, 0xcc, 0x4c, 0x18, 8},
+};
+
+static void ax88179_set_pm_mode(struct usbnet *dev, bool pm_mode)
+{
+	struct ax88179_data *ax179_data = dev->driver_priv;
+
+	ax179_data->in_pm = pm_mode;
+}
+
+static int ax88179_in_pm(struct usbnet *dev)
+{
+	struct ax88179_data *ax179_data = dev->driver_priv;
+
+	return ax179_data->in_pm;
+}
+
+static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			      u16 size, void *data)
+{
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
+
+	BUG_ON(!dev);
+
+	if (!ax88179_in_pm(dev))
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting)))
+		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			       u16 size, const void *data)
+{
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+	struct ax88179_data *ax179_data = dev->driver_priv;
+
+	BUG_ON(!dev);
+
+	if (!ax88179_in_pm(dev))
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely((ret < 0) && !(ret == -ENODEV && ax179_data->disconnecting)))
+		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+static void ax88179_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
+				    u16 index, u16 size, void *data)
+{
+	u16 buf;
+
+	if (2 == size) {
+		buf = *((u16 *)data);
+		cpu_to_le16s(&buf);
+		usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+				       USB_RECIP_DEVICE, value, index, &buf,
+				       size);
+	} else {
+		usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+				       USB_RECIP_DEVICE, value, index, data,
+				       size);
+	}
+}
+
+static int ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			    u16 size, void *data)
+{
+	int ret;
+
+	if (2 == size) {
+		u16 buf = 0;
+		ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf);
+		le16_to_cpus(&buf);
+		*((u16 *)data) = buf;
+	} else if (4 == size) {
+		u32 buf = 0;
+		ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf);
+		le32_to_cpus(&buf);
+		*((u32 *)data) = buf;
+	} else {
+		ret = __ax88179_read_cmd(dev, cmd, value, index, size, data);
+	}
+
+	return ret;
+}
+
+static int ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			     u16 size, const void *data)
+{
+	int ret;
+
+	if (2 == size) {
+		u16 buf;
+		buf = *((u16 *)data);
+		cpu_to_le16s(&buf);
+		ret = __ax88179_write_cmd(dev, cmd, value, index,
+					  size, &buf);
+	} else {
+		ret = __ax88179_write_cmd(dev, cmd, value, index,
+					  size, data);
+	}
+
+	return ret;
+}
+
+static void ax88179_status(struct usbnet *dev, struct urb *urb)
+{
+	struct ax88179_int_data *event;
+	u32 link;
+
+	if (urb->actual_length < 8)
+		return;
+
+	event = urb->transfer_buffer;
+	le32_to_cpus((void *)&event->intdata1);
+
+	link = (((__force u32)event->intdata1) & AX_INT_PPLS_LINK) >> 16;
+
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_info(dev->net, "ax88179 - Link status is: %d\n", link);
+	}
+}
+
+static int ax88179_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 res;
+
+	ax88179_read_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
+	return res;
+}
+
+static void ax88179_mdio_write(struct net_device *netdev, int phy_id, int loc,
+			       int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 res = (u16) val;
+
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
+}
+
+static inline int ax88179_phy_mmd_indirect(struct usbnet *dev, u16 prtad,
+					   u16 devad)
+{
+	u16 tmp16;
+	int ret;
+
+	tmp16 = devad;
+	ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+				MII_MMD_CTRL, 2, &tmp16);
+
+	tmp16 = prtad;
+	ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+				MII_MMD_DATA, 2, &tmp16);
+
+	tmp16 = devad | MII_MMD_CTRL_NOINCR;
+	ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+				MII_MMD_CTRL, 2, &tmp16);
+
+	return ret;
+}
+
+static int
+ax88179_phy_read_mmd_indirect(struct usbnet *dev, u16 prtad, u16 devad)
+{
+	int ret;
+	u16 tmp16;
+
+	ax88179_phy_mmd_indirect(dev, prtad, devad);
+
+	ret = ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			       MII_MMD_DATA, 2, &tmp16);
+	if (ret < 0)
+		return ret;
+
+	return tmp16;
+}
+
+static int
+ax88179_phy_write_mmd_indirect(struct usbnet *dev, u16 prtad, u16 devad,
+			       u16 data)
+{
+	int ret;
+
+	ax88179_phy_mmd_indirect(dev, prtad, devad);
+
+	ret = ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+				MII_MMD_DATA, 2, &data);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int ax88179_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *priv = dev->driver_priv;
+	u16 tmp16;
+	u8 tmp8;
+
+	ax88179_set_pm_mode(dev, true);
+
+	usbnet_suspend(intf, message);
+
+	/* Enable WoL */
+	if (priv->wolopts) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+				 1, 1, &tmp8);
+		if (priv->wolopts & WAKE_PHY)
+			tmp8 |= AX_MONITOR_MODE_RWLC;
+		if (priv->wolopts & WAKE_MAGIC)
+			tmp8 |= AX_MONITOR_MODE_RWMP;
+
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+				  1, 1, &tmp8);
+	}
+
+	/* Disable RX path */
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			 2, 2, &tmp16);
+	tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			  2, 2, &tmp16);
+
+	/* Force bulk-in zero length */
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+			 2, 2, &tmp16);
+
+	tmp16 |= AX_PHYPWR_RSTCTL_BZ | AX_PHYPWR_RSTCTL_IPRL;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+			  2, 2, &tmp16);
+
+	/* change clock */
+	tmp8 = 0;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+
+	/* Configure RX control register => stop operation */
+	tmp16 = AX_RX_CTL_STOP;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+	ax88179_set_pm_mode(dev, false);
+
+	return 0;
+}
+
+/* This function is used to enable the autodetach function. */
+/* This function is determined by offset 0x43 of EEPROM */
+static int ax88179_auto_detach(struct usbnet *dev)
+{
+	u16 tmp16;
+	u8 tmp8;
+
+	if (ax88179_read_cmd(dev, AX_ACCESS_EEPROM, 0x43, 1, 2, &tmp16) < 0)
+		return 0;
+
+	if ((tmp16 == 0xFFFF) || (!(tmp16 & 0x0100)))
+		return 0;
+
+	/* Enable Auto Detach bit */
+	tmp8 = 0;
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+	tmp8 |= AX_CLK_SELECT_ULR;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+	tmp16 |= AX_PHYPWR_RSTCTL_AT;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+
+	return 0;
+}
+
+static int ax88179_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+
+	ax88179_set_pm_mode(dev, true);
+
+	usbnet_link_change(dev, 0, 0);
+
+	ax88179_reset(dev);
+
+	ax88179_set_pm_mode(dev, false);
+
+	return usbnet_resume(intf);
+}
+
+static void ax88179_disconnect(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct ax88179_data *ax179_data;
+
+	if (!dev)
+		return;
+
+	ax179_data = dev->driver_priv;
+	ax179_data->disconnecting = 1;
+
+	usbnet_disconnect(intf);
+}
+
+static void
+ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct ax88179_data *priv = dev->driver_priv;
+
+	wolinfo->supported = priv->wol_supported;
+	wolinfo->wolopts = priv->wolopts;
+}
+
+static int
+ax88179_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct ax88179_data *priv = dev->driver_priv;
+
+	if (wolinfo->wolopts & ~(priv->wol_supported))
+		return -EINVAL;
+
+	priv->wolopts = wolinfo->wolopts;
+
+	return 0;
+}
+
+static int ax88179_get_eeprom_len(struct net_device *net)
+{
+	return AX_EEPROM_LEN;
+}
+
+static int
+ax88179_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		   u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i, ret;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = AX88179_EEPROM_MAGIC;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+	eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
+				    GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* ax88179/178A returns 2 bytes from eeprom on read */
+	for (i = first_word; i <= last_word; i++) {
+		ret = __ax88179_read_cmd(dev, AX_ACCESS_EEPROM, i, 1, 2,
+					 &eeprom_buff[i - first_word]);
+		if (ret < 0) {
+			kfree(eeprom_buff);
+			return -EIO;
+		}
+	}
+
+	memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+	kfree(eeprom_buff);
+	return 0;
+}
+
+static int
+ax88179_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		   u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word;
+	int last_word;
+	int ret;
+	int i;
+
+	netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
+		   eeprom->len, eeprom->offset, eeprom->magic);
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	if (eeprom->magic != AX88179_EEPROM_MAGIC)
+		return -EINVAL;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
+				    GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* align data to 16 bit boundaries, read the missing data from
+	   the EEPROM */
+	if (eeprom->offset & 1) {
+		ret = ax88179_read_cmd(dev, AX_ACCESS_EEPROM, first_word, 1, 2,
+				       &eeprom_buff[0]);
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
+			goto free;
+		}
+	}
+
+	if ((eeprom->offset + eeprom->len) & 1) {
+		ret = ax88179_read_cmd(dev, AX_ACCESS_EEPROM, last_word, 1, 2,
+				       &eeprom_buff[last_word - first_word]);
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
+			goto free;
+		}
+	}
+
+	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
+
+	for (i = first_word; i <= last_word; i++) {
+		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
+			   i, eeprom_buff[i - first_word]);
+		ret = ax88179_write_cmd(dev, AX_ACCESS_EEPROM, i, 1, 2,
+					&eeprom_buff[i - first_word]);
+		if (ret < 0) {
+			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n", i);
+			goto free;
+		}
+		msleep(20);
+	}
+
+	/* reload EEPROM data */
+	ret = ax88179_write_cmd(dev, AX_RELOAD_EEPROM_EFUSE, 0x0000, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_err(net, "Failed to reload EEPROM data\n");
+		goto free;
+	}
+
+	ret = 0;
+free:
+	kfree(eeprom_buff);
+	return ret;
+}
+
+static int ax88179_get_link_ksettings(struct net_device *net,
+				      struct ethtool_link_ksettings *cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	mii_ethtool_get_link_ksettings(&dev->mii, cmd);
+
+	return 0;
+}
+
+static int ax88179_set_link_ksettings(struct net_device *net,
+				      const struct ethtool_link_ksettings *cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+	return mii_ethtool_set_link_ksettings(&dev->mii, cmd);
+}
+
+static int
+ax88179_ethtool_get_eee(struct usbnet *dev, struct ethtool_eee *data)
+{
+	int val;
+
+	/* Get Supported EEE */
+	val = ax88179_phy_read_mmd_indirect(dev, MDIO_PCS_EEE_ABLE,
+					    MDIO_MMD_PCS);
+	if (val < 0)
+		return val;
+	data->supported = mmd_eee_cap_to_ethtool_sup_t(val);
+
+	/* Get advertisement EEE */
+	val = ax88179_phy_read_mmd_indirect(dev, MDIO_AN_EEE_ADV,
+					    MDIO_MMD_AN);
+	if (val < 0)
+		return val;
+	data->advertised = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	/* Get LP advertisement EEE */
+	val = ax88179_phy_read_mmd_indirect(dev, MDIO_AN_EEE_LPABLE,
+					    MDIO_MMD_AN);
+	if (val < 0)
+		return val;
+	data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	return 0;
+}
+
+static int
+ax88179_ethtool_set_eee(struct usbnet *dev, struct ethtool_eee *data)
+{
+	u16 tmp16 = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
+
+	return ax88179_phy_write_mmd_indirect(dev, MDIO_AN_EEE_ADV,
+					      MDIO_MMD_AN, tmp16);
+}
+
+static int ax88179_chk_eee(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	struct ax88179_data *priv = dev->driver_priv;
+
+	mii_ethtool_gset(&dev->mii, &ecmd);
+
+	if (ecmd.duplex & DUPLEX_FULL) {
+		int eee_lp, eee_cap, eee_adv;
+		u32 lp, cap, adv, supported = 0;
+
+		eee_cap = ax88179_phy_read_mmd_indirect(dev,
+							MDIO_PCS_EEE_ABLE,
+							MDIO_MMD_PCS);
+		if (eee_cap < 0) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
+		if (!cap) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		eee_lp = ax88179_phy_read_mmd_indirect(dev,
+						       MDIO_AN_EEE_LPABLE,
+						       MDIO_MMD_AN);
+		if (eee_lp < 0) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		eee_adv = ax88179_phy_read_mmd_indirect(dev,
+							MDIO_AN_EEE_ADV,
+							MDIO_MMD_AN);
+
+		if (eee_adv < 0) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
+		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
+		supported = (ecmd.speed == SPEED_1000) ?
+			     SUPPORTED_1000baseT_Full :
+			     SUPPORTED_100baseT_Full;
+
+		if (!(lp & adv & supported)) {
+			priv->eee_active = 0;
+			return false;
+		}
+
+		priv->eee_active = 1;
+		return true;
+	}
+
+	priv->eee_active = 0;
+	return false;
+}
+
+static void ax88179_disable_eee(struct usbnet *dev)
+{
+	u16 tmp16;
+
+	tmp16 = GMII_PHY_PGSEL_PAGE3;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+
+	tmp16 = 0x3246;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  MII_PHYADDR, 2, &tmp16);
+
+	tmp16 = GMII_PHY_PGSEL_PAGE0;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+}
+
+static void ax88179_enable_eee(struct usbnet *dev)
+{
+	u16 tmp16;
+
+	tmp16 = GMII_PHY_PGSEL_PAGE3;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+
+	tmp16 = 0x3247;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  MII_PHYADDR, 2, &tmp16);
+
+	tmp16 = GMII_PHY_PGSEL_PAGE5;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+
+	tmp16 = 0x0680;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  MII_BMSR, 2, &tmp16);
+
+	tmp16 = GMII_PHY_PGSEL_PAGE0;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp16);
+}
+
+static int ax88179_get_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct ax88179_data *priv = dev->driver_priv;
+
+	edata->eee_enabled = priv->eee_enabled;
+	edata->eee_active = priv->eee_active;
+
+	return ax88179_ethtool_get_eee(dev, edata);
+}
+
+static int ax88179_set_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct ax88179_data *priv = dev->driver_priv;
+	int ret;
+
+	priv->eee_enabled = edata->eee_enabled;
+	if (!priv->eee_enabled) {
+		ax88179_disable_eee(dev);
+	} else {
+		priv->eee_enabled = ax88179_chk_eee(dev);
+		if (!priv->eee_enabled)
+			return -EOPNOTSUPP;
+
+		ax88179_enable_eee(dev);
+	}
+
+	ret = ax88179_ethtool_set_eee(dev, edata);
+	if (ret)
+		return ret;
+
+	mii_nway_restart(&dev->mii);
+
+	usbnet_link_change(dev, 0, 0);
+
+	return ret;
+}
+
+static int ax88179_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops ax88179_ethtool_ops = {
+	.get_link		= ethtool_op_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_wol		= ax88179_get_wol,
+	.set_wol		= ax88179_set_wol,
+	.get_eeprom_len		= ax88179_get_eeprom_len,
+	.get_eeprom		= ax88179_get_eeprom,
+	.set_eeprom		= ax88179_set_eeprom,
+	.get_eee		= ax88179_get_eee,
+	.set_eee		= ax88179_set_eee,
+	.nway_reset		= usbnet_nway_reset,
+	.get_link_ksettings	= ax88179_get_link_ksettings,
+	.set_link_ksettings	= ax88179_set_link_ksettings,
+	.get_ts_info		= ethtool_op_get_ts_info,
+};
+
+static void ax88179_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct ax88179_data *data = dev->driver_priv;
+	u8 *m_filter = ((u8 *)dev->data);
+
+	data->rxctl = (AX_RX_CTL_START | AX_RX_CTL_AB | AX_RX_CTL_IPE);
+
+	if (net->flags & IFF_PROMISC) {
+		data->rxctl |= AX_RX_CTL_PRO;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		data->rxctl |= AX_RX_CTL_AMALL;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use dev->data for our 8 byte filter buffer
+		 * to avoid allocating memory that is tricky to free later
+		 */
+		u32 crc_bits;
+		struct netdev_hw_addr *ha;
+
+		memset(m_filter, 0, AX_MCAST_FLTSIZE);
+
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			*(m_filter + (crc_bits >> 3)) |= (1 << (crc_bits & 7));
+		}
+
+		ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_MULFLTARY,
+					AX_MCAST_FLTSIZE, AX_MCAST_FLTSIZE,
+					m_filter);
+
+		data->rxctl |= AX_RX_CTL_AM;
+	}
+
+	ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_RX_CTL,
+				2, 2, &data->rxctl);
+}
+
+static int
+ax88179_set_features(struct net_device *net, netdev_features_t features)
+{
+	u8 tmp;
+	struct usbnet *dev = netdev_priv(net);
+	netdev_features_t changed = net->features ^ features;
+
+	if (changed & NETIF_F_IP_CSUM) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+		tmp ^= AX_TXCOE_TCP | AX_TXCOE_UDP;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+	}
+
+	if (changed & NETIF_F_IPV6_CSUM) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+		tmp ^= AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+	}
+
+	if (changed & NETIF_F_RXCSUM) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
+		tmp ^= AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+		       AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
+	}
+
+	return 0;
+}
+
+static int ax88179_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 tmp16;
+
+	net->mtu = new_mtu;
+	dev->hard_mtu = net->mtu + net->hard_header_len;
+
+	if (net->mtu > 1500) {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+				 2, 2, &tmp16);
+		tmp16 |= AX_MEDIUM_JUMBO_EN;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+				  2, 2, &tmp16);
+	} else {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+				 2, 2, &tmp16);
+		tmp16 &= ~AX_MEDIUM_JUMBO_EN;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+				  2, 2, &tmp16);
+	}
+
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
+
+	return 0;
+}
+
+static int ax88179_set_mac_addr(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct sockaddr *addr = p;
+	int ret;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	eth_hw_addr_set(net, addr->sa_data);
+
+	/* Set the MAC address */
+	ret = ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+				 ETH_ALEN, net->dev_addr);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static const struct net_device_ops ax88179_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_change_mtu		= ax88179_change_mtu,
+	.ndo_set_mac_address	= ax88179_set_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= ax88179_ioctl,
+	.ndo_set_rx_mode	= ax88179_set_multicast,
+	.ndo_set_features	= ax88179_set_features,
+};
+
+static int ax88179_check_eeprom(struct usbnet *dev)
+{
+	u8 i, buf, eeprom[20];
+	u16 csum, delay = HZ / 10;
+	unsigned long jtimeout;
+
+	/* Read EEPROM content */
+	for (i = 0; i < 6; i++) {
+		buf = i;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
+				      1, 1, &buf) < 0)
+			return -EINVAL;
+
+		buf = EEP_RD;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+				      1, 1, &buf) < 0)
+			return -EINVAL;
+
+		jtimeout = jiffies + delay;
+		do {
+			ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+					 1, 1, &buf);
+
+			if (time_after(jiffies, jtimeout))
+				return -EINVAL;
+
+		} while (buf & EEP_BUSY);
+
+		__ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
+				   2, 2, &eeprom[i * 2]);
+
+		if ((i == 0) && (eeprom[0] == 0xFF))
+			return -EINVAL;
+	}
+
+	csum = eeprom[6] + eeprom[7] + eeprom[8] + eeprom[9];
+	csum = (csum >> 8) + (csum & 0xff);
+	if ((csum + eeprom[10]) != 0xff)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int ax88179_check_efuse(struct usbnet *dev, u16 *ledmode)
+{
+	u8	i;
+	u8	efuse[64];
+	u16	csum = 0;
+
+	if (ax88179_read_cmd(dev, AX_ACCESS_EFUS, 0, 64, 64, efuse) < 0)
+		return -EINVAL;
+
+	if (*efuse == 0xFF)
+		return -EINVAL;
+
+	for (i = 0; i < 64; i++)
+		csum = csum + efuse[i];
+
+	while (csum > 255)
+		csum = (csum & 0x00FF) + ((csum >> 8) & 0x00FF);
+
+	if (csum != 0xFF)
+		return -EINVAL;
+
+	*ledmode = (efuse[51] << 8) | efuse[52];
+
+	return 0;
+}
+
+static int ax88179_convert_old_led(struct usbnet *dev, u16 *ledvalue)
+{
+	u16 led;
+
+	/* Loaded the old eFuse LED Mode */
+	if (ax88179_read_cmd(dev, AX_ACCESS_EEPROM, 0x3C, 1, 2, &led) < 0)
+		return -EINVAL;
+
+	led >>= 8;
+	switch (led) {
+	case 0xFF:
+		led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
+		      LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
+		      LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
+		break;
+	case 0xFE:
+		led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 | LED_VALID;
+		break;
+	case 0xFD:
+		led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 |
+		      LED2_LINK_10 | LED_VALID;
+		break;
+	case 0xFC:
+		led = LED0_ACTIVE | LED1_ACTIVE | LED1_LINK_1000 | LED2_ACTIVE |
+		      LED2_LINK_100 | LED2_LINK_10 | LED_VALID;
+		break;
+	default:
+		led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
+		      LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
+		      LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
+		break;
+	}
+
+	*ledvalue = led;
+
+	return 0;
+}
+
+static int ax88179_led_setting(struct usbnet *dev)
+{
+	u8 ledfd, value = 0;
+	u16 tmp, ledact, ledlink, ledvalue = 0, delay = HZ / 10;
+	unsigned long jtimeout;
+
+	/* Check AX88179 version. UA1 or UA2*/
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, GENERAL_STATUS, 1, 1, &value);
+
+	if (!(value & AX_SECLD)) {	/* UA1 */
+		value = AX_GPIO_CTRL_GPIO3EN | AX_GPIO_CTRL_GPIO2EN |
+			AX_GPIO_CTRL_GPIO1EN;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_GPIO_CTRL,
+				      1, 1, &value) < 0)
+			return -EINVAL;
+	}
+
+	/* Check EEPROM */
+	if (!ax88179_check_eeprom(dev)) {
+		value = 0x42;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
+				      1, 1, &value) < 0)
+			return -EINVAL;
+
+		value = EEP_RD;
+		if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+				      1, 1, &value) < 0)
+			return -EINVAL;
+
+		jtimeout = jiffies + delay;
+		do {
+			ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+					 1, 1, &value);
+
+			if (time_after(jiffies, jtimeout))
+				return -EINVAL;
+
+		} while (value & EEP_BUSY);
+
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_HIGH,
+				 1, 1, &value);
+		ledvalue = (value << 8);
+
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
+				 1, 1, &value);
+		ledvalue |= value;
+
+		/* load internal ROM for defaule setting */
+		if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
+			ax88179_convert_old_led(dev, &ledvalue);
+
+	} else if (!ax88179_check_efuse(dev, &ledvalue)) {
+		if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
+			ax88179_convert_old_led(dev, &ledvalue);
+	} else {
+		ax88179_convert_old_led(dev, &ledvalue);
+	}
+
+	tmp = GMII_PHY_PGSEL_EXT;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp);
+
+	tmp = 0x2c;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHYPAGE, 2, &tmp);
+
+	ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			 GMII_LED_ACT, 2, &ledact);
+
+	ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			 GMII_LED_LINK, 2, &ledlink);
+
+	ledact &= GMII_LED_ACTIVE_MASK;
+	ledlink &= GMII_LED_LINK_MASK;
+
+	if (ledvalue & LED0_ACTIVE)
+		ledact |= GMII_LED0_ACTIVE;
+
+	if (ledvalue & LED1_ACTIVE)
+		ledact |= GMII_LED1_ACTIVE;
+
+	if (ledvalue & LED2_ACTIVE)
+		ledact |= GMII_LED2_ACTIVE;
+
+	if (ledvalue & LED0_LINK_10)
+		ledlink |= GMII_LED0_LINK_10;
+
+	if (ledvalue & LED1_LINK_10)
+		ledlink |= GMII_LED1_LINK_10;
+
+	if (ledvalue & LED2_LINK_10)
+		ledlink |= GMII_LED2_LINK_10;
+
+	if (ledvalue & LED0_LINK_100)
+		ledlink |= GMII_LED0_LINK_100;
+
+	if (ledvalue & LED1_LINK_100)
+		ledlink |= GMII_LED1_LINK_100;
+
+	if (ledvalue & LED2_LINK_100)
+		ledlink |= GMII_LED2_LINK_100;
+
+	if (ledvalue & LED0_LINK_1000)
+		ledlink |= GMII_LED0_LINK_1000;
+
+	if (ledvalue & LED1_LINK_1000)
+		ledlink |= GMII_LED1_LINK_1000;
+
+	if (ledvalue & LED2_LINK_1000)
+		ledlink |= GMII_LED2_LINK_1000;
+
+	tmp = ledact;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_LED_ACT, 2, &tmp);
+
+	tmp = ledlink;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_LED_LINK, 2, &tmp);
+
+	tmp = GMII_PHY_PGSEL_PAGE0;
+	ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			  GMII_PHY_PAGE_SELECT, 2, &tmp);
+
+	/* LED full duplex setting */
+	ledfd = 0;
+	if (ledvalue & LED0_FD)
+		ledfd |= 0x01;
+	else if ((ledvalue & LED0_USB3_MASK) == 0)
+		ledfd |= 0x02;
+
+	if (ledvalue & LED1_FD)
+		ledfd |= 0x04;
+	else if ((ledvalue & LED1_USB3_MASK) == 0)
+		ledfd |= 0x08;
+
+	if (ledvalue & LED2_FD)
+		ledfd |= 0x10;
+	else if ((ledvalue & LED2_USB3_MASK) == 0)
+		ledfd |= 0x20;
+
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_LEDCTRL, 1, 1, &ledfd);
+
+	return 0;
+}
+
+static void ax88179_get_mac_addr(struct usbnet *dev)
+{
+	u8 mac[ETH_ALEN];
+
+	memset(mac, 0, sizeof(mac));
+
+	/* Maybe the boot loader passed the MAC address via device tree */
+	if (!eth_platform_get_mac_address(&dev->udev->dev, mac)) {
+		netif_dbg(dev, ifup, dev->net,
+			  "MAC address read from device tree");
+	} else {
+		ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+				 ETH_ALEN, mac);
+		netif_dbg(dev, ifup, dev->net,
+			  "MAC address read from ASIX chip");
+	}
+
+	if (is_valid_ether_addr(mac)) {
+		eth_hw_addr_set(dev->net, mac);
+	} else {
+		netdev_info(dev->net, "invalid MAC address, using random\n");
+		eth_hw_addr_random(dev->net);
+	}
+
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN, ETH_ALEN,
+			  dev->net->dev_addr);
+}
+
+static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct ax88179_data *ax179_data;
+
+	usbnet_get_endpoints(dev, intf);
+
+	ax179_data = kzalloc(sizeof(*ax179_data), GFP_KERNEL);
+	if (!ax179_data)
+		return -ENOMEM;
+
+	dev->driver_priv = ax179_data;
+
+	dev->net->netdev_ops = &ax88179_netdev_ops;
+	dev->net->ethtool_ops = &ax88179_ethtool_ops;
+	dev->net->needed_headroom = 8;
+	dev->net->max_mtu = 4088;
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = ax88179_mdio_read;
+	dev->mii.mdio_write = ax88179_mdio_write;
+	dev->mii.phy_id_mask = 0xff;
+	dev->mii.reg_num_mask = 0xff;
+	dev->mii.phy_id = 0x03;
+	dev->mii.supports_gmii = 1;
+
+	dev->net->features |= NETIF_F_SG | NETIF_F_IP_CSUM |
+			      NETIF_F_IPV6_CSUM | NETIF_F_RXCSUM | NETIF_F_TSO;
+
+	dev->net->hw_features |= dev->net->features;
+
+	netif_set_tso_max_size(dev->net, 16384);
+
+	ax88179_reset(dev);
+
+	return 0;
+}
+
+static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct ax88179_data *ax179_data = dev->driver_priv;
+	u16 tmp16;
+
+	/* Configure RX control register => stop operation */
+	tmp16 = AX_RX_CTL_STOP;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+	tmp16 = 0;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp16);
+
+	/* Power down ethernet PHY */
+	tmp16 = 0;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+
+	kfree(ax179_data);
+}
+
+static void
+ax88179_rx_checksum(struct sk_buff *skb, u32 *pkt_hdr)
+{
+	skb->ip_summed = CHECKSUM_NONE;
+
+	/* checksum error bit is set */
+	if ((*pkt_hdr & AX_RXHDR_L3CSUM_ERR) ||
+	    (*pkt_hdr & AX_RXHDR_L4CSUM_ERR))
+		return;
+
+	/* It must be a TCP or UDP packet with a valid checksum */
+	if (((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_TCP) ||
+	    ((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_UDP))
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct sk_buff *ax_skb;
+	int pkt_cnt;
+	u32 rx_hdr;
+	u16 hdr_off;
+	u32 *pkt_hdr;
+
+	/* At the end of the SKB, there's a header telling us how many packets
+	 * are bundled into this buffer and where we can find an array of
+	 * per-packet metadata (which contains elements encoded into u16).
+	 */
+
+	/* SKB contents for current firmware:
+	 *   <packet 1> <padding>
+	 *   ...
+	 *   <packet N> <padding>
+	 *   <per-packet metadata entry 1> <dummy header>
+	 *   ...
+	 *   <per-packet metadata entry N> <dummy header>
+	 *   <padding2> <rx_hdr>
+	 *
+	 * where:
+	 *   <packet N> contains pkt_len bytes:
+	 *		2 bytes of IP alignment pseudo header
+	 *		packet received
+	 *   <per-packet metadata entry N> contains 4 bytes:
+	 *		pkt_len and fields AX_RXHDR_*
+	 *   <padding>	0-7 bytes to terminate at
+	 *		8 bytes boundary (64-bit).
+	 *   <padding2> 4 bytes to make rx_hdr terminate at
+	 *		8 bytes boundary (64-bit)
+	 *   <dummy-header> contains 4 bytes:
+	 *		pkt_len=0 and AX_RXHDR_DROP_ERR
+	 *   <rx-hdr>	contains 4 bytes:
+	 *		pkt_cnt and hdr_off (offset of
+	 *		  <per-packet metadata entry 1>)
+	 *
+	 * pkt_cnt is number of entrys in the per-packet metadata.
+	 * In current firmware there is 2 entrys per packet.
+	 * The first points to the packet and the
+	 *  second is a dummy header.
+	 * This was done probably to align fields in 64-bit and
+	 *  maintain compatibility with old firmware.
+	 * This code assumes that <dummy header> and <padding2> are
+	 *  optional.
+	 */
+
+	if (skb->len < 4)
+		return 0;
+	skb_trim(skb, skb->len - 4);
+	rx_hdr = get_unaligned_le32(skb_tail_pointer(skb));
+	pkt_cnt = (u16)rx_hdr;
+	hdr_off = (u16)(rx_hdr >> 16);
+
+	if (pkt_cnt == 0)
+		return 0;
+
+	/* Make sure that the bounds of the metadata array are inside the SKB
+	 * (and in front of the counter at the end).
+	 */
+	if (pkt_cnt * 4 + hdr_off > skb->len)
+		return 0;
+	pkt_hdr = (u32 *)(skb->data + hdr_off);
+
+	/* Packets must not overlap the metadata array */
+	skb_trim(skb, hdr_off);
+
+	for (; pkt_cnt > 0; pkt_cnt--, pkt_hdr++) {
+		u16 pkt_len_plus_padd;
+		u16 pkt_len;
+
+		le32_to_cpus(pkt_hdr);
+		pkt_len = (*pkt_hdr >> 16) & 0x1fff;
+		pkt_len_plus_padd = (pkt_len + 7) & 0xfff8;
+
+		/* Skip dummy header used for alignment
+		 */
+		if (pkt_len == 0)
+			continue;
+
+		if (pkt_len_plus_padd > skb->len)
+			return 0;
+
+		/* Check CRC or runt packet */
+		if ((*pkt_hdr & (AX_RXHDR_CRC_ERR | AX_RXHDR_DROP_ERR)) ||
+		    pkt_len < 2 + ETH_HLEN) {
+			dev->net->stats.rx_errors++;
+			skb_pull(skb, pkt_len_plus_padd);
+			continue;
+		}
+
+		/* last packet */
+		if (pkt_len_plus_padd == skb->len) {
+			skb_trim(skb, pkt_len);
+
+			/* Skip IP alignment pseudo header */
+			skb_pull(skb, 2);
+
+			skb->truesize = SKB_TRUESIZE(pkt_len_plus_padd);
+			ax88179_rx_checksum(skb, pkt_hdr);
+			return 1;
+		}
+
+		ax_skb = skb_clone(skb, GFP_ATOMIC);
+		if (!ax_skb)
+			return 0;
+		skb_trim(ax_skb, pkt_len);
+
+		/* Skip IP alignment pseudo header */
+		skb_pull(ax_skb, 2);
+
+		skb->truesize = pkt_len_plus_padd +
+				SKB_DATA_ALIGN(sizeof(struct sk_buff));
+		ax88179_rx_checksum(ax_skb, pkt_hdr);
+		usbnet_skb_return(dev, ax_skb);
+
+		skb_pull(skb, pkt_len_plus_padd);
+	}
+
+	return 0;
+}
+
+static struct sk_buff *
+ax88179_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	u32 tx_hdr1, tx_hdr2;
+	int frame_size = dev->maxpacket;
+	int headroom;
+	void *ptr;
+
+	tx_hdr1 = skb->len;
+	tx_hdr2 = skb_shinfo(skb)->gso_size; /* Set TSO mss */
+	if (((skb->len + 8) % frame_size) == 0)
+		tx_hdr2 |= 0x80008000;	/* Enable padding */
+
+	headroom = skb_headroom(skb) - 8;
+
+	if ((dev->net->features & NETIF_F_SG) && skb_linearize(skb))
+		return NULL;
+
+	if ((skb_header_cloned(skb) || headroom < 0) &&
+	    pskb_expand_head(skb, headroom < 0 ? 8 : 0, 0, GFP_ATOMIC)) {
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+
+	ptr = skb_push(skb, 8);
+	put_unaligned_le32(tx_hdr1, ptr);
+	put_unaligned_le32(tx_hdr2, ptr + 4);
+
+	usbnet_set_skb_tx_stats(skb, (skb_shinfo(skb)->gso_segs ?: 1), 0);
+
+	return skb;
+}
+
+static int ax88179_link_reset(struct usbnet *dev)
+{
+	struct ax88179_data *ax179_data = dev->driver_priv;
+	u8 tmp[5], link_sts;
+	u16 mode, tmp16, delay = HZ / 10;
+	u32 tmp32 = 0x40000000;
+	unsigned long jtimeout;
+
+	jtimeout = jiffies + delay;
+	while (tmp32 & 0x40000000) {
+		mode = 0;
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &mode);
+		ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2,
+				  &ax179_data->rxctl);
+
+		/*link up, check the usb device control TX FIFO full or empty*/
+		ax88179_read_cmd(dev, 0x81, 0x8c, 0, 4, &tmp32);
+
+		if (time_after(jiffies, jtimeout))
+			return 0;
+	}
+
+	mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+	       AX_MEDIUM_RXFLOW_CTRLEN;
+
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
+			 1, 1, &link_sts);
+
+	ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+			 GMII_PHY_PHYSR, 2, &tmp16);
+
+	if (!(tmp16 & GMII_PHY_PHYSR_LINK)) {
+		return 0;
+	} else if (GMII_PHY_PHYSR_GIGA == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
+		mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ;
+		if (dev->net->mtu > 1500)
+			mode |= AX_MEDIUM_JUMBO_EN;
+
+		if (link_sts & AX_USB_SS)
+			memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+		else if (link_sts & AX_USB_HS)
+			memcpy(tmp, &AX88179_BULKIN_SIZE[1], 5);
+		else
+			memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+	} else if (GMII_PHY_PHYSR_100 == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
+		mode |= AX_MEDIUM_PS;
+
+		if (link_sts & (AX_USB_SS | AX_USB_HS))
+			memcpy(tmp, &AX88179_BULKIN_SIZE[2], 5);
+		else
+			memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+	} else {
+		memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+	}
+
+	/* RX bulk configuration */
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+	dev->rx_urb_size = (1024 * (tmp[3] + 2));
+
+	if (tmp16 & GMII_PHY_PHYSR_FULL)
+		mode |= AX_MEDIUM_FULL_DUPLEX;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			  2, 2, &mode);
+
+	ax179_data->eee_enabled = ax88179_chk_eee(dev);
+
+	netif_carrier_on(dev->net);
+
+	return 0;
+}
+
+static int ax88179_reset(struct usbnet *dev)
+{
+	u8 buf[5];
+	u16 *tmp16;
+	u8 *tmp;
+	struct ax88179_data *ax179_data = dev->driver_priv;
+	struct ethtool_eee eee_data;
+
+	tmp16 = (u16 *)buf;
+	tmp = (u8 *)buf;
+
+	/* Power up ethernet PHY */
+	*tmp16 = 0;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+
+	*tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+	msleep(500);
+
+	*tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
+	msleep(200);
+
+	/* Ethernet PHY Auto Detach*/
+	ax88179_auto_detach(dev);
+
+	/* Read MAC address from DTB or asix chip */
+	ax88179_get_mac_addr(dev);
+	memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
+
+	/* RX bulk configuration */
+	memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+	dev->rx_urb_size = 1024 * 20;
+
+	*tmp = 0x34;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
+
+	*tmp = 0x52;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
+			  1, 1, tmp);
+
+	/* Enable checksum offload */
+	*tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+	       AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
+
+	*tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
+	       AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
+
+	/* Configure RX control register => start operation */
+	*tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+		 AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
+
+	*tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
+	       AX_MONITOR_MODE_RWMP;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
+
+	/* Configure default medium type => giga */
+	*tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+		 AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_FULL_DUPLEX |
+		 AX_MEDIUM_GIGAMODE;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			  2, 2, tmp16);
+
+	/* Check if WoL is supported */
+	ax179_data->wol_supported = 0;
+	if (ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+			     1, 1, &tmp) > 0)
+		ax179_data->wol_supported = WAKE_MAGIC | WAKE_PHY;
+
+	ax88179_led_setting(dev);
+
+	ax179_data->eee_enabled = 0;
+	ax179_data->eee_active = 0;
+
+	ax88179_disable_eee(dev);
+
+	ax88179_ethtool_get_eee(dev, &eee_data);
+	eee_data.advertised = 0;
+	ax88179_ethtool_set_eee(dev, &eee_data);
+
+	/* Restart autoneg */
+	mii_nway_restart(&dev->mii);
+
+	usbnet_link_change(dev, 0, 0);
+
+	return 0;
+}
+
+static int ax88179_stop(struct usbnet *dev)
+{
+	u16 tmp16;
+
+	ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			 2, 2, &tmp16);
+	tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+	ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+			  2, 2, &tmp16);
+
+	return 0;
+}
+
+static const struct driver_info ax88179_info = {
+	.description = "ASIX AX88179 USB 3.0 Gigabit Ethernet",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info ax88178a_info = {
+	.description = "ASIX AX88178A USB 2.0 Gigabit Ethernet",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info cypress_GX3_info = {
+	.description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info dlink_dub1312_info = {
+	.description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info sitecom_info = {
+	.description = "Sitecom USB 3.0 to Gigabit Adapter",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info samsung_info = {
+	.description = "Samsung USB Ethernet Adapter",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info lenovo_info = {
+	.description = "Lenovo OneLinkDock Gigabit LAN",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info belkin_info = {
+	.description = "Belkin USB Ethernet Adapter",
+	.bind	= ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset	= ax88179_reset,
+	.stop	= ax88179_stop,
+	.flags	= FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info toshiba_info = {
+	.description = "Toshiba USB Ethernet Adapter",
+	.bind	= ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset	= ax88179_reset,
+	.stop = ax88179_stop,
+	.flags	= FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info mct_info = {
+	.description = "MCT USB 3.0 Gigabit Ethernet Adapter",
+	.bind	= ax88179_bind,
+	.unbind	= ax88179_unbind,
+	.status	= ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset	= ax88179_reset,
+	.stop	= ax88179_stop,
+	.flags	= FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info at_umc2000_info = {
+	.description = "AT-UMC2000 USB 3.0/USB 3.1 Gen 1 to Gigabit Ethernet Adapter",
+	.bind   = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset  = ax88179_reset,
+	.stop   = ax88179_stop,
+	.flags  = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info at_umc200_info = {
+	.description = "AT-UMC200 USB 3.0/USB 3.1 Gen 1 to Fast Ethernet Adapter",
+	.bind   = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset  = ax88179_reset,
+	.stop   = ax88179_stop,
+	.flags  = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info at_umc2000sp_info = {
+	.description = "AT-UMC2000/SP USB 3.0/USB 3.1 Gen 1 to Gigabit Ethernet Adapter",
+	.bind   = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset  = ax88179_reset,
+	.stop   = ax88179_stop,
+	.flags  = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+{
+	/* ASIX AX88179 10/100/1000 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0b95, 0x1790, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&ax88179_info,
+}, {
+	/* ASIX AX88178A 10/100/1000 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0b95, 0x178a, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&ax88178a_info,
+}, {
+	/* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
+	USB_DEVICE_AND_INTERFACE_INFO(0x04b4, 0x3610, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&cypress_GX3_info,
+}, {
+	/* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
+	USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x4a00, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&dlink_dub1312_info,
+}, {
+	/* Sitecom USB 3.0 to Gigabit Adapter */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0072, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&sitecom_info,
+}, {
+	/* Samsung USB Ethernet Adapter */
+	USB_DEVICE_AND_INTERFACE_INFO(0x04e8, 0xa100, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&samsung_info,
+}, {
+	/* Lenovo OneLinkDock Gigabit LAN */
+	USB_DEVICE_AND_INTERFACE_INFO(0x17ef, 0x304b, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&lenovo_info,
+}, {
+	/* Belkin B2B128 USB 3.0 Hub + Gigabit Ethernet Adapter */
+	USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x0128, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&belkin_info,
+}, {
+	/* Toshiba USB 3.0 GBit Ethernet Adapter */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x0a13, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&toshiba_info,
+}, {
+	/* Magic Control Technology U3-A9003 USB 3.0 Gigabit Ethernet Adapter */
+	USB_DEVICE_AND_INTERFACE_INFO(0x0711, 0x0179, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&mct_info,
+}, {
+	/* Allied Telesis AT-UMC2000 USB 3.0/USB 3.1 Gen 1 to Gigabit Ethernet Adapter */
+	USB_DEVICE_AND_INTERFACE_INFO(0x07c9, 0x000e, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&at_umc2000_info,
+}, {
+	/* Allied Telesis AT-UMC200 USB 3.0/USB 3.1 Gen 1 to Fast Ethernet Adapter */
+	USB_DEVICE_AND_INTERFACE_INFO(0x07c9, 0x000f, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&at_umc200_info,
+}, {
+	/* Allied Telesis AT-UMC2000/SP USB 3.0/USB 3.1 Gen 1 to Gigabit Ethernet Adapter */
+	USB_DEVICE_AND_INTERFACE_INFO(0x07c9, 0x0010, 0xff, 0xff, 0),
+	.driver_info = (unsigned long)&at_umc2000sp_info,
+},
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver ax88179_178a_driver = {
+	.name =		"ax88179_178a",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.suspend =	ax88179_suspend,
+	.resume =	ax88179_resume,
+	.reset_resume =	ax88179_resume,
+	.disconnect =	ax88179_disconnect,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(ax88179_178a_driver);
+
+MODULE_DESCRIPTION("ASIX AX88179/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
new file mode 100644
index 000000000..ff439ef53
--- /dev/null
+++ b/drivers/net/usb/catc.c
@@ -0,0 +1,981 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (c) 2001 Vojtech Pavlik
+ *
+ *  CATC EL1210A NetMate USB Ethernet driver
+ *
+ *  Sponsored by SuSE
+ *
+ *  Based on the work of
+ *		Donald Becker
+ *
+ *  Old chipset support added by Simon Evans <spse@secret.org.uk> 2002
+ *    - adds support for Belkin F5U011
+ */
+
+/*
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <linux/gfp.h>
+#include <linux/uaccess.h>
+
+#undef DEBUG
+
+#include <linux/usb.h>
+
+/*
+ * Version information.
+ */
+
+#define DRIVER_VERSION "v2.8"
+#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@suse.cz>"
+#define DRIVER_DESC "CATC EL1210A NetMate USB Ethernet driver"
+#define SHORT_DRIVER_DESC "EL1210A NetMate USB Ethernet"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "catc";
+
+/*
+ * Some defines.
+ */
+
+#define STATS_UPDATE		(HZ)	/* Time between stats updates */
+#define TX_TIMEOUT		(5*HZ)	/* Max time the queue can be stopped */
+#define PKT_SZ			1536	/* Max Ethernet packet size */
+#define RX_MAX_BURST		15	/* Max packets per rx buffer (> 0, < 16) */
+#define TX_MAX_BURST		15	/* Max full sized packets per tx buffer (> 0) */
+#define CTRL_QUEUE		16	/* Max control requests in flight (power of two) */
+#define RX_PKT_SZ		1600	/* Max size of receive packet for F5U011 */
+
+/*
+ * Control requests.
+ */
+
+enum control_requests {
+	ReadMem =	0xf1,
+	GetMac =	0xf2,
+	Reset =		0xf4,
+	SetMac =	0xf5,
+	SetRxMode =     0xf5,  /* F5U011 only */
+	WriteROM =	0xf8,
+	SetReg =	0xfa,
+	GetReg =	0xfb,
+	WriteMem =	0xfc,
+	ReadROM =	0xfd,
+};
+
+/*
+ * Registers.
+ */
+
+enum register_offsets {
+	TxBufCount =	0x20,
+	RxBufCount =	0x21,
+	OpModes =	0x22,
+	TxQed =		0x23,
+	RxQed =		0x24,
+	MaxBurst =	0x25,
+	RxUnit =	0x60,
+	EthStatus =	0x61,
+	StationAddr0 =	0x67,
+	EthStats =	0x69,
+	LEDCtrl =	0x81,
+};
+
+enum eth_stats {
+	TxSingleColl =	0x00,
+        TxMultiColl =	0x02,
+        TxExcessColl =	0x04,
+        RxFramErr =	0x06,
+};
+
+enum op_mode_bits {
+	Op3MemWaits =	0x03,
+	OpLenInclude =	0x08,
+	OpRxMerge =	0x10,
+	OpTxMerge =	0x20,
+	OpWin95bugfix =	0x40,
+	OpLoopback =	0x80,
+};
+
+enum rx_filter_bits {
+	RxEnable =	0x01,
+	RxPolarity =	0x02,
+	RxForceOK =	0x04,
+	RxMultiCast =	0x08,
+	RxPromisc =	0x10,
+	AltRxPromisc =  0x20, /* F5U011 uses different bit */
+};
+
+enum led_values {
+	LEDFast = 	0x01,
+	LEDSlow =	0x02,
+	LEDFlash =	0x03,
+	LEDPulse =	0x04,
+	LEDLink =	0x08,
+};
+
+enum link_status {
+	LinkNoChange = 0,
+	LinkGood     = 1,
+	LinkBad      = 2
+};
+
+/*
+ * The catc struct.
+ */
+
+#define CTRL_RUNNING	0
+#define RX_RUNNING	1
+#define TX_RUNNING	2
+
+struct catc {
+	struct net_device *netdev;
+	struct usb_device *usbdev;
+
+	unsigned long flags;
+
+	unsigned int tx_ptr, tx_idx;
+	unsigned int ctrl_head, ctrl_tail;
+	spinlock_t tx_lock, ctrl_lock;
+
+	u8 tx_buf[2][TX_MAX_BURST * (PKT_SZ + 2)];
+	u8 rx_buf[RX_MAX_BURST * (PKT_SZ + 2)];
+	u8 irq_buf[2];
+	u8 ctrl_buf[64];
+	struct usb_ctrlrequest ctrl_dr;
+
+	struct timer_list timer;
+	u8 stats_buf[8];
+	u16 stats_vals[4];
+	unsigned long last_stats;
+
+	u8 multicast[64];
+
+	struct ctrl_queue {
+		u8 dir;
+		u8 request;
+		u16 value;
+		u16 index;
+		void *buf;
+		int len;
+		void (*callback)(struct catc *catc, struct ctrl_queue *q);
+	} ctrl_queue[CTRL_QUEUE];
+
+	struct urb *tx_urb, *rx_urb, *irq_urb, *ctrl_urb;
+
+	u8 is_f5u011;	/* Set if device is an F5U011 */
+	u8 rxmode[2];	/* Used for F5U011 */
+	atomic_t recq_sz; /* Used for F5U011 - counter of waiting rx packets */
+};
+
+/*
+ * Useful macros.
+ */
+
+#define catc_get_mac(catc, mac)				catc_ctrl_msg(catc, USB_DIR_IN,  GetMac, 0, 0, mac,  6)
+#define catc_reset(catc)				catc_ctrl_msg(catc, USB_DIR_OUT, Reset, 0, 0, NULL, 0)
+#define catc_set_reg(catc, reg, val)			catc_ctrl_msg(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0)
+#define catc_get_reg(catc, reg, buf)			catc_ctrl_msg(catc, USB_DIR_IN,  GetReg, 0, reg, buf, 1)
+#define catc_write_mem(catc, addr, buf, size)		catc_ctrl_msg(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size)
+#define catc_read_mem(catc, addr, buf, size)		catc_ctrl_msg(catc, USB_DIR_IN,  ReadMem, 0, addr, buf, size)
+
+#define f5u011_rxmode(catc, rxmode)			catc_ctrl_msg(catc, USB_DIR_OUT, SetRxMode, 0, 1, rxmode, 2)
+#define f5u011_rxmode_async(catc, rxmode)		catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 1, &rxmode, 2, NULL)
+#define f5u011_mchash_async(catc, hash)			catc_ctrl_async(catc, USB_DIR_OUT, SetRxMode, 0, 2, &hash, 8, NULL)
+
+#define catc_set_reg_async(catc, reg, val)		catc_ctrl_async(catc, USB_DIR_OUT, SetReg, val, reg, NULL, 0, NULL)
+#define catc_get_reg_async(catc, reg, cb)		catc_ctrl_async(catc, USB_DIR_IN, GetReg, 0, reg, NULL, 1, cb)
+#define catc_write_mem_async(catc, addr, buf, size)	catc_ctrl_async(catc, USB_DIR_OUT, WriteMem, 0, addr, buf, size, NULL)
+
+/*
+ * Receive routines.
+ */
+
+static void catc_rx_done(struct urb *urb)
+{
+	struct catc *catc = urb->context;
+	u8 *pkt_start = urb->transfer_buffer;
+	struct sk_buff *skb;
+	int pkt_len, pkt_offset = 0;
+	int status = urb->status;
+
+	if (!catc->is_f5u011) {
+		clear_bit(RX_RUNNING, &catc->flags);
+		pkt_offset = 2;
+	}
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "rx_done, status %d, length %d\n",
+			status, urb->actual_length);
+		return;
+	}
+
+	do {
+		if(!catc->is_f5u011) {
+			pkt_len = le16_to_cpup((__le16*)pkt_start);
+			if (pkt_len > urb->actual_length) {
+				catc->netdev->stats.rx_length_errors++;
+				catc->netdev->stats.rx_errors++;
+				break;
+			}
+		} else {
+			pkt_len = urb->actual_length;
+		}
+
+		if (!(skb = dev_alloc_skb(pkt_len)))
+			return;
+
+		skb_copy_to_linear_data(skb, pkt_start + pkt_offset, pkt_len);
+		skb_put(skb, pkt_len);
+
+		skb->protocol = eth_type_trans(skb, catc->netdev);
+		netif_rx(skb);
+
+		catc->netdev->stats.rx_packets++;
+		catc->netdev->stats.rx_bytes += pkt_len;
+
+		/* F5U011 only does one packet per RX */
+		if (catc->is_f5u011)
+			break;
+		pkt_start += (((pkt_len + 1) >> 6) + 1) << 6;
+
+	} while (pkt_start - (u8 *) urb->transfer_buffer < urb->actual_length);
+
+	if (catc->is_f5u011) {
+		if (atomic_read(&catc->recq_sz)) {
+			int state;
+			atomic_dec(&catc->recq_sz);
+			netdev_dbg(catc->netdev, "getting extra packet\n");
+			urb->dev = catc->usbdev;
+			if ((state = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
+				netdev_dbg(catc->netdev,
+					   "submit(rx_urb) status %d\n", state);
+			}
+		} else {
+			clear_bit(RX_RUNNING, &catc->flags);
+		}
+	}
+}
+
+static void catc_irq_done(struct urb *urb)
+{
+	struct catc *catc = urb->context;
+	u8 *data = urb->transfer_buffer;
+	int status = urb->status;
+	unsigned int hasdata, linksts = LinkNoChange;
+	int res;
+
+	if (!catc->is_f5u011) {
+		hasdata = data[1] & 0x80;
+		if (data[1] & 0x40)
+			linksts = LinkGood;
+		else if (data[1] & 0x20)
+			linksts = LinkBad;
+	} else {
+		hasdata = (unsigned int)(be16_to_cpup((__be16*)data) & 0x0fff);
+		if (data[0] == 0x90)
+			linksts = LinkGood;
+		else if (data[0] == 0xA0)
+			linksts = LinkBad;
+	}
+
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	/* -EPIPE:  should clear the halt */
+	default:		/* error */
+		dev_dbg(&urb->dev->dev,
+			"irq_done, status %d, data %02x %02x.\n",
+			status, data[0], data[1]);
+		goto resubmit;
+	}
+
+	if (linksts == LinkGood) {
+		netif_carrier_on(catc->netdev);
+		netdev_dbg(catc->netdev, "link ok\n");
+	}
+
+	if (linksts == LinkBad) {
+		netif_carrier_off(catc->netdev);
+		netdev_dbg(catc->netdev, "link bad\n");
+	}
+
+	if (hasdata) {
+		if (test_and_set_bit(RX_RUNNING, &catc->flags)) {
+			if (catc->is_f5u011)
+				atomic_inc(&catc->recq_sz);
+		} else {
+			catc->rx_urb->dev = catc->usbdev;
+			if ((res = usb_submit_urb(catc->rx_urb, GFP_ATOMIC)) < 0) {
+				dev_err(&catc->usbdev->dev,
+					"submit(rx_urb) status %d\n", res);
+			}
+		}
+	}
+resubmit:
+	res = usb_submit_urb (urb, GFP_ATOMIC);
+	if (res)
+		dev_err(&catc->usbdev->dev,
+			"can't resubmit intr, %s-%s, status %d\n",
+			catc->usbdev->bus->bus_name,
+			catc->usbdev->devpath, res);
+}
+
+/*
+ * Transmit routines.
+ */
+
+static int catc_tx_run(struct catc *catc)
+{
+	int status;
+
+	if (catc->is_f5u011)
+		catc->tx_ptr = (catc->tx_ptr + 63) & ~63;
+
+	catc->tx_urb->transfer_buffer_length = catc->tx_ptr;
+	catc->tx_urb->transfer_buffer = catc->tx_buf[catc->tx_idx];
+	catc->tx_urb->dev = catc->usbdev;
+
+	if ((status = usb_submit_urb(catc->tx_urb, GFP_ATOMIC)) < 0)
+		dev_err(&catc->usbdev->dev, "submit(tx_urb), status %d\n",
+			status);
+
+	catc->tx_idx = !catc->tx_idx;
+	catc->tx_ptr = 0;
+
+	netif_trans_update(catc->netdev);
+	return status;
+}
+
+static void catc_tx_done(struct urb *urb)
+{
+	struct catc *catc = urb->context;
+	unsigned long flags;
+	int r, status = urb->status;
+
+	if (status == -ECONNRESET) {
+		dev_dbg(&urb->dev->dev, "Tx Reset.\n");
+		urb->status = 0;
+		netif_trans_update(catc->netdev);
+		catc->netdev->stats.tx_errors++;
+		clear_bit(TX_RUNNING, &catc->flags);
+		netif_wake_queue(catc->netdev);
+		return;
+	}
+
+	if (status) {
+		dev_dbg(&urb->dev->dev, "tx_done, status %d, length %d\n",
+			status, urb->actual_length);
+		return;
+	}
+
+	spin_lock_irqsave(&catc->tx_lock, flags);
+
+	if (catc->tx_ptr) {
+		r = catc_tx_run(catc);
+		if (unlikely(r < 0))
+			clear_bit(TX_RUNNING, &catc->flags);
+	} else {
+		clear_bit(TX_RUNNING, &catc->flags);
+	}
+
+	netif_wake_queue(catc->netdev);
+
+	spin_unlock_irqrestore(&catc->tx_lock, flags);
+}
+
+static netdev_tx_t catc_start_xmit(struct sk_buff *skb,
+					 struct net_device *netdev)
+{
+	struct catc *catc = netdev_priv(netdev);
+	unsigned long flags;
+	int r = 0;
+	char *tx_buf;
+
+	spin_lock_irqsave(&catc->tx_lock, flags);
+
+	catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
+	tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
+	if (catc->is_f5u011)
+		*(__be16 *)tx_buf = cpu_to_be16(skb->len);
+	else
+		*(__le16 *)tx_buf = cpu_to_le16(skb->len);
+	skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
+	catc->tx_ptr += skb->len + 2;
+
+	if (!test_and_set_bit(TX_RUNNING, &catc->flags)) {
+		r = catc_tx_run(catc);
+		if (r < 0)
+			clear_bit(TX_RUNNING, &catc->flags);
+	}
+
+	if ((catc->is_f5u011 && catc->tx_ptr) ||
+	    (catc->tx_ptr >= ((TX_MAX_BURST - 1) * (PKT_SZ + 2))))
+		netif_stop_queue(netdev);
+
+	spin_unlock_irqrestore(&catc->tx_lock, flags);
+
+	if (r >= 0) {
+		catc->netdev->stats.tx_bytes += skb->len;
+		catc->netdev->stats.tx_packets++;
+	}
+
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+static void catc_tx_timeout(struct net_device *netdev, unsigned int txqueue)
+{
+	struct catc *catc = netdev_priv(netdev);
+
+	dev_warn(&netdev->dev, "Transmit timed out.\n");
+	usb_unlink_urb(catc->tx_urb);
+}
+
+/*
+ * Control messages.
+ */
+
+static int catc_ctrl_msg(struct catc *catc, u8 dir, u8 request, u16 value, u16 index, void *buf, int len)
+{
+        int retval = usb_control_msg(catc->usbdev,
+		dir ? usb_rcvctrlpipe(catc->usbdev, 0) : usb_sndctrlpipe(catc->usbdev, 0),
+		 request, 0x40 | dir, value, index, buf, len, 1000);
+        return retval < 0 ? retval : 0;
+}
+
+static void catc_ctrl_run(struct catc *catc)
+{
+	struct ctrl_queue *q = catc->ctrl_queue + catc->ctrl_tail;
+	struct usb_device *usbdev = catc->usbdev;
+	struct urb *urb = catc->ctrl_urb;
+	struct usb_ctrlrequest *dr = &catc->ctrl_dr;
+	int status;
+
+	dr->bRequest = q->request;
+	dr->bRequestType = 0x40 | q->dir;
+	dr->wValue = cpu_to_le16(q->value);
+	dr->wIndex = cpu_to_le16(q->index);
+	dr->wLength = cpu_to_le16(q->len);
+
+        urb->pipe = q->dir ? usb_rcvctrlpipe(usbdev, 0) : usb_sndctrlpipe(usbdev, 0);
+	urb->transfer_buffer_length = q->len;
+	urb->transfer_buffer = catc->ctrl_buf;
+	urb->setup_packet = (void *) dr;
+	urb->dev = usbdev;
+
+	if (!q->dir && q->buf && q->len)
+		memcpy(catc->ctrl_buf, q->buf, q->len);
+
+	if ((status = usb_submit_urb(catc->ctrl_urb, GFP_ATOMIC)))
+		dev_err(&catc->usbdev->dev, "submit(ctrl_urb) status %d\n",
+			status);
+}
+
+static void catc_ctrl_done(struct urb *urb)
+{
+	struct catc *catc = urb->context;
+	struct ctrl_queue *q;
+	unsigned long flags;
+	int status = urb->status;
+
+	if (status)
+		dev_dbg(&urb->dev->dev, "ctrl_done, status %d, len %d.\n",
+			status, urb->actual_length);
+
+	spin_lock_irqsave(&catc->ctrl_lock, flags);
+
+	q = catc->ctrl_queue + catc->ctrl_tail;
+
+	if (q->dir) {
+		if (q->buf && q->len)
+			memcpy(q->buf, catc->ctrl_buf, q->len);
+		else
+			q->buf = catc->ctrl_buf;
+	}
+
+	if (q->callback)
+		q->callback(catc, q);
+
+	catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
+
+	if (catc->ctrl_head != catc->ctrl_tail)
+		catc_ctrl_run(catc);
+	else
+		clear_bit(CTRL_RUNNING, &catc->flags);
+
+	spin_unlock_irqrestore(&catc->ctrl_lock, flags);
+}
+
+static int catc_ctrl_async(struct catc *catc, u8 dir, u8 request, u16 value,
+	u16 index, void *buf, int len, void (*callback)(struct catc *catc, struct ctrl_queue *q))
+{
+	struct ctrl_queue *q;
+	int retval = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&catc->ctrl_lock, flags);
+
+	q = catc->ctrl_queue + catc->ctrl_head;
+
+	q->dir = dir;
+	q->request = request;
+	q->value = value;
+	q->index = index;
+	q->buf = buf;
+	q->len = len;
+	q->callback = callback;
+
+	catc->ctrl_head = (catc->ctrl_head + 1) & (CTRL_QUEUE - 1);
+
+	if (catc->ctrl_head == catc->ctrl_tail) {
+		dev_err(&catc->usbdev->dev, "ctrl queue full\n");
+		catc->ctrl_tail = (catc->ctrl_tail + 1) & (CTRL_QUEUE - 1);
+		retval = -1;
+	}
+
+	if (!test_and_set_bit(CTRL_RUNNING, &catc->flags))
+		catc_ctrl_run(catc);
+
+	spin_unlock_irqrestore(&catc->ctrl_lock, flags);
+
+	return retval;
+}
+
+/*
+ * Statistics.
+ */
+
+static void catc_stats_done(struct catc *catc, struct ctrl_queue *q)
+{
+	int index = q->index - EthStats;
+	u16 data, last;
+
+	catc->stats_buf[index] = *((char *)q->buf);
+
+	if (index & 1)
+		return;
+
+	data = ((u16)catc->stats_buf[index] << 8) | catc->stats_buf[index + 1];
+	last = catc->stats_vals[index >> 1];
+
+	switch (index) {
+		case TxSingleColl:
+		case TxMultiColl:
+			catc->netdev->stats.collisions += data - last;
+			break;
+		case TxExcessColl:
+			catc->netdev->stats.tx_aborted_errors += data - last;
+			catc->netdev->stats.tx_errors += data - last;
+			break;
+		case RxFramErr:
+			catc->netdev->stats.rx_frame_errors += data - last;
+			catc->netdev->stats.rx_errors += data - last;
+			break;
+	}
+
+	catc->stats_vals[index >> 1] = data;
+}
+
+static void catc_stats_timer(struct timer_list *t)
+{
+	struct catc *catc = from_timer(catc, t, timer);
+	int i;
+
+	for (i = 0; i < 8; i++)
+		catc_get_reg_async(catc, EthStats + 7 - i, catc_stats_done);
+
+	mod_timer(&catc->timer, jiffies + STATS_UPDATE);
+}
+
+/*
+ * Receive modes. Broadcast, Multicast, Promisc.
+ */
+
+static void catc_multicast(const unsigned char *addr, u8 *multicast)
+{
+	u32 crc;
+
+	crc = ether_crc_le(6, addr);
+	multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
+}
+
+static void catc_set_multicast_list(struct net_device *netdev)
+{
+	struct catc *catc = netdev_priv(netdev);
+	struct netdev_hw_addr *ha;
+	u8 broadcast[ETH_ALEN];
+	u8 rx = RxEnable | RxPolarity | RxMultiCast;
+
+	eth_broadcast_addr(broadcast);
+	memset(catc->multicast, 0, 64);
+
+	catc_multicast(broadcast, catc->multicast);
+	catc_multicast(netdev->dev_addr, catc->multicast);
+
+	if (netdev->flags & IFF_PROMISC) {
+		memset(catc->multicast, 0xff, 64);
+		rx |= (!catc->is_f5u011) ? RxPromisc : AltRxPromisc;
+	}
+
+	if (netdev->flags & IFF_ALLMULTI) {
+		memset(catc->multicast, 0xff, 64);
+	} else {
+		netdev_for_each_mc_addr(ha, netdev) {
+			u32 crc = ether_crc_le(6, ha->addr);
+			if (!catc->is_f5u011) {
+				catc->multicast[(crc >> 3) & 0x3f] |= 1 << (crc & 7);
+			} else {
+				catc->multicast[7-(crc >> 29)] |= 1 << ((crc >> 26) & 7);
+			}
+		}
+	}
+	if (!catc->is_f5u011) {
+		catc_set_reg_async(catc, RxUnit, rx);
+		catc_write_mem_async(catc, 0xfa80, catc->multicast, 64);
+	} else {
+		f5u011_mchash_async(catc, catc->multicast);
+		if (catc->rxmode[0] != rx) {
+			catc->rxmode[0] = rx;
+			netdev_dbg(catc->netdev,
+				   "Setting RX mode to %2.2X %2.2X\n",
+				   catc->rxmode[0], catc->rxmode[1]);
+			f5u011_rxmode_async(catc, catc->rxmode);
+		}
+	}
+}
+
+static void catc_get_drvinfo(struct net_device *dev,
+			     struct ethtool_drvinfo *info)
+{
+	struct catc *catc = netdev_priv(dev);
+	strscpy(info->driver, driver_name, sizeof(info->driver));
+	strscpy(info->version, DRIVER_VERSION, sizeof(info->version));
+	usb_make_path(catc->usbdev, info->bus_info, sizeof(info->bus_info));
+}
+
+static int catc_get_link_ksettings(struct net_device *dev,
+				   struct ethtool_link_ksettings *cmd)
+{
+	struct catc *catc = netdev_priv(dev);
+	if (!catc->is_f5u011)
+		return -EOPNOTSUPP;
+
+	ethtool_link_ksettings_zero_link_mode(cmd, supported);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, 10baseT_Half);
+	ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
+
+	ethtool_link_ksettings_zero_link_mode(cmd, advertising);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, 10baseT_Half);
+	ethtool_link_ksettings_add_link_mode(cmd, advertising, TP);
+
+	cmd->base.speed = SPEED_10;
+	cmd->base.duplex = DUPLEX_HALF;
+	cmd->base.port = PORT_TP;
+	cmd->base.phy_address = 0;
+	cmd->base.autoneg = AUTONEG_DISABLE;
+
+	return 0;
+}
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = catc_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+	.get_link_ksettings = catc_get_link_ksettings,
+};
+
+/*
+ * Open, close.
+ */
+
+static int catc_open(struct net_device *netdev)
+{
+	struct catc *catc = netdev_priv(netdev);
+	int status;
+
+	catc->irq_urb->dev = catc->usbdev;
+	if ((status = usb_submit_urb(catc->irq_urb, GFP_KERNEL)) < 0) {
+		dev_err(&catc->usbdev->dev, "submit(irq_urb) status %d\n",
+			status);
+		return -1;
+	}
+
+	netif_start_queue(netdev);
+
+	if (!catc->is_f5u011)
+		mod_timer(&catc->timer, jiffies + STATS_UPDATE);
+
+	return 0;
+}
+
+static int catc_stop(struct net_device *netdev)
+{
+	struct catc *catc = netdev_priv(netdev);
+
+	netif_stop_queue(netdev);
+
+	if (!catc->is_f5u011)
+		del_timer_sync(&catc->timer);
+
+	usb_kill_urb(catc->rx_urb);
+	usb_kill_urb(catc->tx_urb);
+	usb_kill_urb(catc->irq_urb);
+	usb_kill_urb(catc->ctrl_urb);
+
+	return 0;
+}
+
+static const struct net_device_ops catc_netdev_ops = {
+	.ndo_open		= catc_open,
+	.ndo_stop		= catc_stop,
+	.ndo_start_xmit		= catc_start_xmit,
+
+	.ndo_tx_timeout		= catc_tx_timeout,
+	.ndo_set_rx_mode	= catc_set_multicast_list,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+/*
+ * USB probe, disconnect.
+ */
+
+static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct device *dev = &intf->dev;
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct net_device *netdev;
+	struct catc *catc;
+	u8 broadcast[ETH_ALEN];
+	u8 *macbuf;
+	int pktsz, ret = -ENOMEM;
+
+	macbuf = kmalloc(ETH_ALEN, GFP_KERNEL);
+	if (!macbuf)
+		goto error;
+
+	if (usb_set_interface(usbdev,
+			intf->altsetting->desc.bInterfaceNumber, 1)) {
+		dev_err(dev, "Can't set altsetting 1.\n");
+		ret = -EIO;
+		goto fail_mem;
+	}
+
+	netdev = alloc_etherdev(sizeof(struct catc));
+	if (!netdev)
+		goto fail_mem;
+
+	catc = netdev_priv(netdev);
+
+	netdev->netdev_ops = &catc_netdev_ops;
+	netdev->watchdog_timeo = TX_TIMEOUT;
+	netdev->ethtool_ops = &ops;
+
+	catc->usbdev = usbdev;
+	catc->netdev = netdev;
+
+	spin_lock_init(&catc->tx_lock);
+	spin_lock_init(&catc->ctrl_lock);
+
+	timer_setup(&catc->timer, catc_stats_timer, 0);
+
+	catc->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
+	catc->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	catc->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	catc->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if ((!catc->ctrl_urb) || (!catc->tx_urb) ||
+	    (!catc->rx_urb) || (!catc->irq_urb)) {
+		dev_err(&intf->dev, "No free urbs available.\n");
+		ret = -ENOMEM;
+		goto fail_free;
+	}
+
+	/* The F5U011 has the same vendor/product as the netmate but a device version of 0x130 */
+	if (le16_to_cpu(usbdev->descriptor.idVendor) == 0x0423 &&
+	    le16_to_cpu(usbdev->descriptor.idProduct) == 0xa &&
+	    le16_to_cpu(catc->usbdev->descriptor.bcdDevice) == 0x0130) {
+		dev_dbg(dev, "Testing for f5u011\n");
+		catc->is_f5u011 = 1;
+		atomic_set(&catc->recq_sz, 0);
+		pktsz = RX_PKT_SZ;
+	} else {
+		pktsz = RX_MAX_BURST * (PKT_SZ + 2);
+	}
+
+	usb_fill_control_urb(catc->ctrl_urb, usbdev, usb_sndctrlpipe(usbdev, 0),
+		NULL, NULL, 0, catc_ctrl_done, catc);
+
+	usb_fill_bulk_urb(catc->tx_urb, usbdev, usb_sndbulkpipe(usbdev, 1),
+		NULL, 0, catc_tx_done, catc);
+
+	usb_fill_bulk_urb(catc->rx_urb, usbdev, usb_rcvbulkpipe(usbdev, 1),
+		catc->rx_buf, pktsz, catc_rx_done, catc);
+
+	usb_fill_int_urb(catc->irq_urb, usbdev, usb_rcvintpipe(usbdev, 2),
+                catc->irq_buf, 2, catc_irq_done, catc, 1);
+
+	if (!catc->is_f5u011) {
+		u32 *buf;
+		int i;
+
+		dev_dbg(dev, "Checking memory size\n");
+
+		buf = kmalloc(4, GFP_KERNEL);
+		if (!buf) {
+			ret = -ENOMEM;
+			goto fail_free;
+		}
+
+		*buf = 0x12345678;
+		catc_write_mem(catc, 0x7a80, buf, 4);
+		*buf = 0x87654321;
+		catc_write_mem(catc, 0xfa80, buf, 4);
+		catc_read_mem(catc, 0x7a80, buf, 4);
+
+		switch (*buf) {
+		case 0x12345678:
+			catc_set_reg(catc, TxBufCount, 8);
+			catc_set_reg(catc, RxBufCount, 32);
+			dev_dbg(dev, "64k Memory\n");
+			break;
+		default:
+			dev_warn(&intf->dev,
+				 "Couldn't detect memory size, assuming 32k\n");
+			fallthrough;
+		case 0x87654321:
+			catc_set_reg(catc, TxBufCount, 4);
+			catc_set_reg(catc, RxBufCount, 16);
+			dev_dbg(dev, "32k Memory\n");
+			break;
+		}
+
+		kfree(buf);
+
+		dev_dbg(dev, "Getting MAC from SEEROM.\n");
+
+		catc_get_mac(catc, macbuf);
+		eth_hw_addr_set(netdev, macbuf);
+
+		dev_dbg(dev, "Setting MAC into registers.\n");
+
+		for (i = 0; i < 6; i++)
+			catc_set_reg(catc, StationAddr0 - i, netdev->dev_addr[i]);
+
+		dev_dbg(dev, "Filling the multicast list.\n");
+
+		eth_broadcast_addr(broadcast);
+		catc_multicast(broadcast, catc->multicast);
+		catc_multicast(netdev->dev_addr, catc->multicast);
+		catc_write_mem(catc, 0xfa80, catc->multicast, 64);
+
+		dev_dbg(dev, "Clearing error counters.\n");
+
+		for (i = 0; i < 8; i++)
+			catc_set_reg(catc, EthStats + i, 0);
+		catc->last_stats = jiffies;
+
+		dev_dbg(dev, "Enabling.\n");
+
+		catc_set_reg(catc, MaxBurst, RX_MAX_BURST);
+		catc_set_reg(catc, OpModes, OpTxMerge | OpRxMerge | OpLenInclude | Op3MemWaits);
+		catc_set_reg(catc, LEDCtrl, LEDLink);
+		catc_set_reg(catc, RxUnit, RxEnable | RxPolarity | RxMultiCast);
+	} else {
+		dev_dbg(dev, "Performing reset\n");
+		catc_reset(catc);
+		catc_get_mac(catc, macbuf);
+		eth_hw_addr_set(netdev, macbuf);
+
+		dev_dbg(dev, "Setting RX Mode\n");
+		catc->rxmode[0] = RxEnable | RxPolarity | RxMultiCast;
+		catc->rxmode[1] = 0;
+		f5u011_rxmode(catc, catc->rxmode);
+	}
+	dev_dbg(dev, "Init done.\n");
+	printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, %pM.\n",
+	       netdev->name, (catc->is_f5u011) ? "Belkin F5U011" : "CATC EL1210A NetMate",
+	       usbdev->bus->bus_name, usbdev->devpath, netdev->dev_addr);
+	usb_set_intfdata(intf, catc);
+
+	SET_NETDEV_DEV(netdev, &intf->dev);
+	ret = register_netdev(netdev);
+	if (ret)
+		goto fail_clear_intfdata;
+
+	kfree(macbuf);
+	return 0;
+
+fail_clear_intfdata:
+	usb_set_intfdata(intf, NULL);
+fail_free:
+	usb_free_urb(catc->ctrl_urb);
+	usb_free_urb(catc->tx_urb);
+	usb_free_urb(catc->rx_urb);
+	usb_free_urb(catc->irq_urb);
+	free_netdev(netdev);
+fail_mem:
+	kfree(macbuf);
+error:
+	return ret;
+}
+
+static void catc_disconnect(struct usb_interface *intf)
+{
+	struct catc *catc = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (catc) {
+		unregister_netdev(catc->netdev);
+		usb_free_urb(catc->ctrl_urb);
+		usb_free_urb(catc->tx_urb);
+		usb_free_urb(catc->rx_urb);
+		usb_free_urb(catc->irq_urb);
+		free_netdev(catc->netdev);
+	}
+}
+
+/*
+ * Module functions and tables.
+ */
+
+static const struct usb_device_id catc_id_table[] = {
+	{ USB_DEVICE(0x0423, 0xa) },	/* CATC Netmate, Belkin F5U011 */
+	{ USB_DEVICE(0x0423, 0xc) },	/* CATC Netmate II, Belkin F5U111 */
+	{ USB_DEVICE(0x08d1, 0x1) },	/* smartBridges smartNIC */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, catc_id_table);
+
+static struct usb_driver catc_driver = {
+	.name =		driver_name,
+	.probe =	catc_probe,
+	.disconnect =	catc_disconnect,
+	.id_table =	catc_id_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(catc_driver);
diff --git a/drivers/net/usb/cdc-phonet.c b/drivers/net/usb/cdc-phonet.c
new file mode 100644
index 000000000..ad5121e9c
--- /dev/null
+++ b/drivers/net/usb/cdc-phonet.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * phonet.c -- USB CDC Phonet host driver
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation. All rights reserved.
+ *
+ * Author: Rémi Denis-Courmont
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/gfp.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/if_phonet.h>
+#include <linux/phonet.h>
+
+#define PN_MEDIA_USB	0x1B
+
+static const unsigned rxq_size = 17;
+
+struct usbpn_dev {
+	struct net_device	*dev;
+
+	struct usb_interface	*intf, *data_intf;
+	struct usb_device	*usb;
+	unsigned int		tx_pipe, rx_pipe;
+	u8 active_setting;
+	u8 disconnected;
+
+	unsigned		tx_queue;
+	spinlock_t		tx_lock;
+
+	spinlock_t		rx_lock;
+	struct sk_buff		*rx_skb;
+	struct urb		*urbs[];
+};
+
+static void tx_complete(struct urb *req);
+static void rx_complete(struct urb *req);
+
+/*
+ * Network device callbacks
+ */
+static netdev_tx_t usbpn_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	struct urb *req = NULL;
+	unsigned long flags;
+	int err;
+
+	if (skb->protocol != htons(ETH_P_PHONET))
+		goto drop;
+
+	req = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!req)
+		goto drop;
+	usb_fill_bulk_urb(req, pnd->usb, pnd->tx_pipe, skb->data, skb->len,
+				tx_complete, skb);
+	req->transfer_flags = URB_ZERO_PACKET;
+	err = usb_submit_urb(req, GFP_ATOMIC);
+	if (err) {
+		usb_free_urb(req);
+		goto drop;
+	}
+
+	spin_lock_irqsave(&pnd->tx_lock, flags);
+	pnd->tx_queue++;
+	if (pnd->tx_queue >= dev->tx_queue_len)
+		netif_stop_queue(dev);
+	spin_unlock_irqrestore(&pnd->tx_lock, flags);
+	return NETDEV_TX_OK;
+
+drop:
+	dev_kfree_skb(skb);
+	dev->stats.tx_dropped++;
+	return NETDEV_TX_OK;
+}
+
+static void tx_complete(struct urb *req)
+{
+	struct sk_buff *skb = req->context;
+	struct net_device *dev = skb->dev;
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	int status = req->status;
+	unsigned long flags;
+
+	switch (status) {
+	case 0:
+		dev->stats.tx_bytes += skb->len;
+		break;
+
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dev->stats.tx_aborted_errors++;
+		fallthrough;
+	default:
+		dev->stats.tx_errors++;
+		dev_dbg(&dev->dev, "TX error (%d)\n", status);
+	}
+	dev->stats.tx_packets++;
+
+	spin_lock_irqsave(&pnd->tx_lock, flags);
+	pnd->tx_queue--;
+	netif_wake_queue(dev);
+	spin_unlock_irqrestore(&pnd->tx_lock, flags);
+
+	dev_kfree_skb_any(skb);
+	usb_free_urb(req);
+}
+
+static int rx_submit(struct usbpn_dev *pnd, struct urb *req, gfp_t gfp_flags)
+{
+	struct net_device *dev = pnd->dev;
+	struct page *page;
+	int err;
+
+	page = __dev_alloc_page(gfp_flags | __GFP_NOMEMALLOC);
+	if (!page)
+		return -ENOMEM;
+
+	usb_fill_bulk_urb(req, pnd->usb, pnd->rx_pipe, page_address(page),
+				PAGE_SIZE, rx_complete, dev);
+	req->transfer_flags = 0;
+	err = usb_submit_urb(req, gfp_flags);
+	if (unlikely(err)) {
+		dev_dbg(&dev->dev, "RX submit error (%d)\n", err);
+		put_page(page);
+	}
+	return err;
+}
+
+static void rx_complete(struct urb *req)
+{
+	struct net_device *dev = req->context;
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	struct page *page = virt_to_page(req->transfer_buffer);
+	struct sk_buff *skb;
+	unsigned long flags;
+	int status = req->status;
+
+	switch (status) {
+	case 0:
+		spin_lock_irqsave(&pnd->rx_lock, flags);
+		skb = pnd->rx_skb;
+		if (!skb) {
+			skb = pnd->rx_skb = netdev_alloc_skb(dev, 12);
+			if (likely(skb)) {
+				/* Can't use pskb_pull() on page in IRQ */
+				skb_put_data(skb, page_address(page), 1);
+				skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+						page, 1, req->actual_length,
+						PAGE_SIZE);
+				page = NULL;
+			}
+		} else {
+			skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
+					page, 0, req->actual_length,
+					PAGE_SIZE);
+			page = NULL;
+		}
+		if (req->actual_length < PAGE_SIZE)
+			pnd->rx_skb = NULL; /* Last fragment */
+		else
+			skb = NULL;
+		spin_unlock_irqrestore(&pnd->rx_lock, flags);
+		if (skb) {
+			skb->protocol = htons(ETH_P_PHONET);
+			skb_reset_mac_header(skb);
+			__skb_pull(skb, 1);
+			skb->dev = dev;
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += skb->len;
+
+			netif_rx(skb);
+		}
+		goto resubmit;
+
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		req = NULL;
+		break;
+
+	case -EOVERFLOW:
+		dev->stats.rx_over_errors++;
+		dev_dbg(&dev->dev, "RX overflow\n");
+		break;
+
+	case -EILSEQ:
+		dev->stats.rx_crc_errors++;
+		break;
+	}
+
+	dev->stats.rx_errors++;
+resubmit:
+	if (page)
+		put_page(page);
+	if (req)
+		rx_submit(pnd, req, GFP_ATOMIC);
+}
+
+static int usbpn_close(struct net_device *dev);
+
+static int usbpn_open(struct net_device *dev)
+{
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	int err;
+	unsigned i;
+	unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+	err = usb_set_interface(pnd->usb, num, pnd->active_setting);
+	if (err)
+		return err;
+
+	for (i = 0; i < rxq_size; i++) {
+		struct urb *req = usb_alloc_urb(0, GFP_KERNEL);
+
+		if (!req || rx_submit(pnd, req, GFP_KERNEL)) {
+			usb_free_urb(req);
+			usbpn_close(dev);
+			return -ENOMEM;
+		}
+		pnd->urbs[i] = req;
+	}
+
+	netif_wake_queue(dev);
+	return 0;
+}
+
+static int usbpn_close(struct net_device *dev)
+{
+	struct usbpn_dev *pnd = netdev_priv(dev);
+	unsigned i;
+	unsigned num = pnd->data_intf->cur_altsetting->desc.bInterfaceNumber;
+
+	netif_stop_queue(dev);
+
+	for (i = 0; i < rxq_size; i++) {
+		struct urb *req = pnd->urbs[i];
+
+		if (!req)
+			continue;
+		usb_kill_urb(req);
+		usb_free_urb(req);
+		pnd->urbs[i] = NULL;
+	}
+
+	return usb_set_interface(pnd->usb, num, !pnd->active_setting);
+}
+
+static int usbpn_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
+				void __user *data, int cmd)
+{
+	struct if_phonet_req *req = (struct if_phonet_req *)ifr;
+
+	switch (cmd) {
+	case SIOCPNGAUTOCONF:
+		req->ifr_phonet_autoconf.device = PN_DEV_PC;
+		return 0;
+	}
+	return -ENOIOCTLCMD;
+}
+
+static const struct net_device_ops usbpn_ops = {
+	.ndo_open	= usbpn_open,
+	.ndo_stop	= usbpn_close,
+	.ndo_start_xmit = usbpn_xmit,
+	.ndo_siocdevprivate = usbpn_siocdevprivate,
+};
+
+static void usbpn_setup(struct net_device *dev)
+{
+	const u8 addr = PN_MEDIA_USB;
+
+	dev->features		= 0;
+	dev->netdev_ops		= &usbpn_ops;
+	dev->header_ops		= &phonet_header_ops;
+	dev->type		= ARPHRD_PHONET;
+	dev->flags		= IFF_POINTOPOINT | IFF_NOARP;
+	dev->mtu		= PHONET_MAX_MTU;
+	dev->min_mtu		= PHONET_MIN_MTU;
+	dev->max_mtu		= PHONET_MAX_MTU;
+	dev->hard_header_len	= 1;
+	dev->addr_len		= 1;
+	dev_addr_set(dev, &addr);
+	dev->tx_queue_len	= 3;
+
+	dev->needs_free_netdev	= true;
+}
+
+/*
+ * USB driver callbacks
+ */
+static const struct usb_device_id usbpn_ids[] = {
+	{
+		.match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_INT_CLASS
+			| USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+		.idVendor = 0x0421, /* Nokia */
+		.bInterfaceClass = USB_CLASS_COMM,
+		.bInterfaceSubClass = 0xFE,
+	},
+	{ },
+};
+
+MODULE_DEVICE_TABLE(usb, usbpn_ids);
+
+static struct usb_driver usbpn_driver;
+
+static int usbpn_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	static const char ifname[] = "usbpn%d";
+	const struct usb_cdc_union_desc *union_header = NULL;
+	const struct usb_host_interface *data_desc;
+	struct usb_interface *data_intf;
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct net_device *dev;
+	struct usbpn_dev *pnd;
+	u8 *data;
+	int phonet = 0;
+	int len, err;
+	struct usb_cdc_parsed_header hdr;
+
+	data = intf->altsetting->extra;
+	len = intf->altsetting->extralen;
+	cdc_parse_cdc_header(&hdr, intf, data, len);
+	union_header = hdr.usb_cdc_union_desc;
+	phonet = hdr.phonet_magic_present;
+
+	if (!union_header || !phonet)
+		return -EINVAL;
+
+	data_intf = usb_ifnum_to_if(usbdev, union_header->bSlaveInterface0);
+	if (data_intf == NULL)
+		return -ENODEV;
+	/* Data interface has one inactive and one active setting */
+	if (data_intf->num_altsetting != 2)
+		return -EINVAL;
+	if (data_intf->altsetting[0].desc.bNumEndpoints == 0 &&
+	    data_intf->altsetting[1].desc.bNumEndpoints == 2)
+		data_desc = data_intf->altsetting + 1;
+	else
+	if (data_intf->altsetting[0].desc.bNumEndpoints == 2 &&
+	    data_intf->altsetting[1].desc.bNumEndpoints == 0)
+		data_desc = data_intf->altsetting;
+	else
+		return -EINVAL;
+
+	dev = alloc_netdev(struct_size(pnd, urbs, rxq_size), ifname,
+			   NET_NAME_UNKNOWN, usbpn_setup);
+	if (!dev)
+		return -ENOMEM;
+
+	pnd = netdev_priv(dev);
+	SET_NETDEV_DEV(dev, &intf->dev);
+
+	pnd->dev = dev;
+	pnd->usb = usbdev;
+	pnd->intf = intf;
+	pnd->data_intf = data_intf;
+	spin_lock_init(&pnd->tx_lock);
+	spin_lock_init(&pnd->rx_lock);
+	/* Endpoints */
+	if (usb_pipein(data_desc->endpoint[0].desc.bEndpointAddress)) {
+		pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+			data_desc->endpoint[0].desc.bEndpointAddress);
+		pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+			data_desc->endpoint[1].desc.bEndpointAddress);
+	} else {
+		pnd->rx_pipe = usb_rcvbulkpipe(usbdev,
+			data_desc->endpoint[1].desc.bEndpointAddress);
+		pnd->tx_pipe = usb_sndbulkpipe(usbdev,
+			data_desc->endpoint[0].desc.bEndpointAddress);
+	}
+	pnd->active_setting = data_desc - data_intf->altsetting;
+
+	err = usb_driver_claim_interface(&usbpn_driver, data_intf, pnd);
+	if (err)
+		goto out;
+
+	/* Force inactive mode until the network device is brought UP */
+	usb_set_interface(usbdev, union_header->bSlaveInterface0,
+				!pnd->active_setting);
+	usb_set_intfdata(intf, pnd);
+
+	err = register_netdev(dev);
+	if (err) {
+		/* Set disconnected flag so that disconnect() returns early. */
+		pnd->disconnected = 1;
+		usb_driver_release_interface(&usbpn_driver, data_intf);
+		goto out;
+	}
+
+	dev_dbg(&dev->dev, "USB CDC Phonet device found\n");
+	return 0;
+
+out:
+	usb_set_intfdata(intf, NULL);
+	free_netdev(dev);
+	return err;
+}
+
+static void usbpn_disconnect(struct usb_interface *intf)
+{
+	struct usbpn_dev *pnd = usb_get_intfdata(intf);
+
+	if (pnd->disconnected)
+		return;
+
+	pnd->disconnected = 1;
+	usb_driver_release_interface(&usbpn_driver,
+			(pnd->intf == intf) ? pnd->data_intf : pnd->intf);
+	unregister_netdev(pnd->dev);
+}
+
+static struct usb_driver usbpn_driver = {
+	.name =		"cdc_phonet",
+	.probe =	usbpn_probe,
+	.disconnect =	usbpn_disconnect,
+	.id_table =	usbpn_ids,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(usbpn_driver);
+
+MODULE_AUTHOR("Remi Denis-Courmont");
+MODULE_DESCRIPTION("USB CDC Phonet host interface");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
new file mode 100644
index 000000000..baa9b14b1
--- /dev/null
+++ b/drivers/net/usb/cdc_eem.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * USB CDC EEM network interface driver
+ * Copyright (C) 2009 Oberthur Technologies
+ * by Omar Laazimani, Olivier Condemine
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
+#include <linux/if_vlan.h>
+
+
+/*
+ * This driver is an implementation of the CDC "Ethernet Emulation
+ * Model" (EEM) specification, which encapsulates Ethernet frames
+ * for transport over USB using a simpler USB device model than the
+ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
+ *
+ * For details, see https://usb.org/sites/default/files/CDC_EEM10.pdf
+ *
+ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
+ * 2.6.27 and 2.6.30rc2 kernel.
+ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
+ * build on 23-April-2009
+ */
+
+#define EEM_HEAD	2		/* 2 byte header */
+
+/*-------------------------------------------------------------------------*/
+
+static void eem_linkcmd_complete(struct urb *urb)
+{
+	dev_kfree_skb(urb->context);
+	usb_free_urb(urb);
+}
+
+static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct urb		*urb;
+	int			status;
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb)
+		goto fail;
+
+	usb_fill_bulk_urb(urb, dev->udev, dev->out,
+			skb->data, skb->len, eem_linkcmd_complete, skb);
+
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		usb_free_urb(urb);
+fail:
+		dev_kfree_skb(skb);
+		netdev_warn(dev->net, "link cmd failure\n");
+		return;
+	}
+}
+
+static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = 0;
+
+	status = usbnet_get_endpoints(dev, intf);
+	if (status < 0)
+		return status;
+
+	/* no jumbogram (16K) support for now */
+
+	dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN + VLAN_HLEN;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+	return 0;
+}
+
+/*
+ * EEM permits packing multiple Ethernet frames into USB transfers
+ * (a "bundle"), but for TX we don't try to do that.
+ */
+static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	struct sk_buff	*skb2 = NULL;
+	u16		len = skb->len;
+	u32		crc = 0;
+	int		padlen = 0;
+
+	/* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
+	 * zero, stick two bytes of zero length EEM packet on the end.
+	 * Else the framework would add invalid single byte padding,
+	 * since it can't know whether ZLPs will be handled right by
+	 * all the relevant hardware and software.
+	 */
+	if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
+		padlen += 2;
+
+	if (!skb_cloned(skb)) {
+		int	headroom = skb_headroom(skb);
+		int	tailroom = skb_tailroom(skb);
+
+		if ((tailroom >= ETH_FCS_LEN + padlen) &&
+		    (headroom >= EEM_HEAD))
+			goto done;
+
+		if ((headroom + tailroom)
+				> (EEM_HEAD + ETH_FCS_LEN + padlen)) {
+			skb->data = memmove(skb->head +
+					EEM_HEAD,
+					skb->data,
+					skb->len);
+			skb_set_tail_pointer(skb, len);
+			goto done;
+		}
+	}
+
+	skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+	dev_kfree_skb_any(skb);
+	if (!skb2)
+		return NULL;
+
+	skb = skb2;
+
+done:
+	/* we don't use the "no Ethernet CRC" option */
+	crc = crc32_le(~0, skb->data, skb->len);
+	crc = ~crc;
+
+	put_unaligned_le32(crc, skb_put(skb, 4));
+
+	/* EEM packet header format:
+	 * b0..13:	length of ethernet frame
+	 * b14:		bmCRC (1 == valid Ethernet CRC)
+	 * b15:		bmType (0 == data)
+	 */
+	len = skb->len;
+	put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
+
+	/* Bundle a zero length EEM packet if needed */
+	if (padlen)
+		put_unaligned_le16(0, skb_put(skb, 2));
+
+	return skb;
+}
+
+static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/*
+	 * Our task here is to strip off framing, leaving skb with one
+	 * data frame for the usbnet framework code to process.  But we
+	 * may have received multiple EEM payloads, or command payloads.
+	 * So we must process _everything_ as if it's a header, except
+	 * maybe the last data payload
+	 *
+	 * REVISIT the framework needs updating so that when we consume
+	 * all payloads (the last or only message was a command, or a
+	 * zero length EEM packet) that is not accounted as an rx_error.
+	 */
+	do {
+		struct sk_buff	*skb2 = NULL;
+		u16		header;
+		u16		len = 0;
+
+		/* incomplete EEM header? */
+		if (skb->len < EEM_HEAD)
+			return 0;
+
+		/*
+		 * EEM packet header format:
+		 * b0..14:	EEM type dependent (Data or Command)
+		 * b15:		bmType
+		 */
+		header = get_unaligned_le16(skb->data);
+		skb_pull(skb, EEM_HEAD);
+
+		/*
+		 * The bmType bit helps to denote when EEM
+		 * packet is data or command :
+		 *	bmType = 0	: EEM data payload
+		 *	bmType = 1	: EEM (link) command
+		 */
+		if (header & BIT(15)) {
+			u16	bmEEMCmd;
+
+			/*
+			 * EEM (link) command packet:
+			 * b0..10:	bmEEMCmdParam
+			 * b11..13:	bmEEMCmd
+			 * b14:		bmReserved (must be 0)
+			 * b15:		1 (EEM command)
+			 */
+			if (header & BIT(14)) {
+				netdev_dbg(dev->net, "reserved command %04x\n",
+					   header);
+				continue;
+			}
+
+			bmEEMCmd = (header >> 11) & 0x7;
+			switch (bmEEMCmd) {
+
+			/* Responding to echo requests is mandatory. */
+			case 0:		/* Echo command */
+				len = header & 0x7FF;
+
+				/* bogus command? */
+				if (skb->len < len)
+					return 0;
+
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2))
+					goto next;
+				skb_trim(skb2, len);
+				put_unaligned_le16(BIT(15) | BIT(11) | len,
+						skb_push(skb2, 2));
+				eem_linkcmd(dev, skb2);
+				break;
+
+			/*
+			 * Host may choose to ignore hints.
+			 *  - suspend: peripheral ready to suspend
+			 *  - response: suggest N millisec polling
+			 *  - response complete: suggest N sec polling
+			 *
+			 * Suspend is reported and maybe heeded.
+			 */
+			case 2:		/* Suspend hint */
+				usbnet_device_suggests_idle(dev);
+				continue;
+			case 3:		/* Response hint */
+			case 4:		/* Response complete hint */
+				continue;
+
+			/*
+			 * Hosts should never receive host-to-peripheral
+			 * or reserved command codes; or responses to an
+			 * echo command we didn't send.
+			 */
+			case 1:		/* Echo response */
+			case 5:		/* Tickle */
+			default:	/* reserved */
+				netdev_warn(dev->net,
+					    "unexpected link command %d\n",
+					    bmEEMCmd);
+				continue;
+			}
+
+		} else {
+			u32	crc, crc2;
+			int	is_last;
+
+			/* zero length EEM packet? */
+			if (header == 0)
+				continue;
+
+			/*
+			 * EEM data packet header :
+			 * b0..13:	length of ethernet frame
+			 * b14:		bmCRC
+			 * b15:		0 (EEM data)
+			 */
+			len = header & 0x3FFF;
+
+			/* bogus EEM payload? */
+			if (skb->len < len)
+				return 0;
+
+			/* bogus ethernet frame? */
+			if (len < (ETH_HLEN + ETH_FCS_LEN))
+				goto next;
+
+			/*
+			 * Treat the last payload differently: framework
+			 * code expects our "fixup" to have stripped off
+			 * headers, so "skb" is a data packet (or error).
+			 * Else if it's not the last payload, keep "skb"
+			 * for further processing.
+			 */
+			is_last = (len == skb->len);
+			if (is_last)
+				skb2 = skb;
+			else {
+				skb2 = skb_clone(skb, GFP_ATOMIC);
+				if (unlikely(!skb2))
+					return 0;
+			}
+
+			/*
+			 * The bmCRC helps to denote when the CRC field in
+			 * the Ethernet frame contains a calculated CRC:
+			 *	bmCRC = 1	: CRC is calculated
+			 *	bmCRC = 0	: CRC = 0xDEADBEEF
+			 */
+			if (header & BIT(14)) {
+				crc = get_unaligned_le32(skb2->data
+						+ len - ETH_FCS_LEN);
+				crc2 = ~crc32_le(~0, skb2->data, skb2->len
+						- ETH_FCS_LEN);
+			} else {
+				crc = get_unaligned_be32(skb2->data
+						+ len - ETH_FCS_LEN);
+				crc2 = 0xdeadbeef;
+			}
+			skb_trim(skb2, len - ETH_FCS_LEN);
+
+			if (is_last)
+				return crc == crc2;
+
+			if (unlikely(crc != crc2)) {
+				dev->net->stats.rx_errors++;
+				dev_kfree_skb_any(skb2);
+			} else
+				usbnet_skb_return(dev, skb2);
+		}
+
+next:
+		skb_pull(skb, len);
+	} while (skb->len);
+
+	return 1;
+}
+
+static const struct driver_info eem_info = {
+	.description =	"CDC EEM Device",
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT,
+	.bind =		eem_bind,
+	.rx_fixup =	eem_rx_fixup,
+	.tx_fixup =	eem_tx_fixup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+{
+	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM,
+			USB_CDC_PROTO_EEM),
+	.driver_info = (unsigned long) &eem_info,
+},
+{
+	/* EMPTY == end of list */
+},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver eem_driver = {
+	.name =		"cdc_eem",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(eem_driver);
+
+MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>");
+MODULE_DESCRIPTION("USB CDC EEM");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
new file mode 100644
index 000000000..f07bfe56e
--- /dev/null
+++ b/drivers/net/usb/cdc_ether.c
@@ -0,0 +1,1072 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * CDC Ethernet based networking peripherals
+ * Copyright (C) 2003-2005 by David Brownell
+ * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+#if IS_ENABLED(CONFIG_USB_NET_RNDIS_HOST)
+
+static int is_rndis(struct usb_interface_descriptor *desc)
+{
+	return (desc->bInterfaceClass == USB_CLASS_COMM &&
+		desc->bInterfaceSubClass == 2 &&
+		desc->bInterfaceProtocol == 0xff);
+}
+
+static int is_activesync(struct usb_interface_descriptor *desc)
+{
+	return (desc->bInterfaceClass == USB_CLASS_MISC &&
+		desc->bInterfaceSubClass == 1 &&
+		desc->bInterfaceProtocol == 1);
+}
+
+static int is_wireless_rndis(struct usb_interface_descriptor *desc)
+{
+	return (desc->bInterfaceClass == USB_CLASS_WIRELESS_CONTROLLER &&
+		desc->bInterfaceSubClass == 1 &&
+		desc->bInterfaceProtocol == 3);
+}
+
+static int is_novatel_rndis(struct usb_interface_descriptor *desc)
+{
+	return (desc->bInterfaceClass == USB_CLASS_MISC &&
+		desc->bInterfaceSubClass == 4 &&
+		desc->bInterfaceProtocol == 1);
+}
+
+#else
+
+#define is_rndis(desc)		0
+#define is_activesync(desc)	0
+#define is_wireless_rndis(desc)	0
+#define is_novatel_rndis(desc)	0
+
+#endif
+
+static const u8 mbm_guid[16] = {
+	0xa3, 0x17, 0xa8, 0x8b, 0x04, 0x5e, 0x4f, 0x01,
+	0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
+};
+
+void usbnet_cdc_update_filter(struct usbnet *dev)
+{
+	struct net_device	*net = dev->net;
+
+	u16 cdc_filter = USB_CDC_PACKET_TYPE_DIRECTED
+			| USB_CDC_PACKET_TYPE_BROADCAST;
+
+	/* filtering on the device is an optional feature and not worth
+	 * the hassle so we just roughly care about snooping and if any
+	 * multicast is requested, we take every multicast
+	 */
+	if (net->flags & IFF_PROMISC)
+		cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
+	if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI))
+		cdc_filter |= USB_CDC_PACKET_TYPE_ALL_MULTICAST;
+
+	usb_control_msg(dev->udev,
+			usb_sndctrlpipe(dev->udev, 0),
+			USB_CDC_SET_ETHERNET_PACKET_FILTER,
+			USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			cdc_filter,
+			dev->intf->cur_altsetting->desc.bInterfaceNumber,
+			NULL,
+			0,
+			USB_CTRL_SET_TIMEOUT
+		);
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_update_filter);
+
+/* We need to override usbnet_*_link_ksettings in bind() */
+static const struct ethtool_ops cdc_ether_ethtool_ops = {
+	.get_link		= usbnet_get_link,
+	.nway_reset		= usbnet_nway_reset,
+	.get_drvinfo		= usbnet_get_drvinfo,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_ts_info		= ethtool_op_get_ts_info,
+	.get_link_ksettings	= usbnet_get_link_ksettings_internal,
+	.set_link_ksettings	= NULL,
+};
+
+/* probes control interface, claims data interface, collects the bulk
+ * endpoints, activates data interface (if needed), maybe sets MTU.
+ * all pure cdc, except for certain firmware workarounds, and knowing
+ * that rndis uses one different rule.
+ */
+int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	u8				*buf = intf->cur_altsetting->extra;
+	int				len = intf->cur_altsetting->extralen;
+	struct usb_interface_descriptor	*d;
+	struct cdc_state		*info = (void *) &dev->data;
+	int				status;
+	int				rndis;
+	bool				android_rndis_quirk = false;
+	struct usb_driver		*driver = driver_of(intf);
+	struct usb_cdc_parsed_header header;
+
+	if (sizeof(dev->data) < sizeof(*info))
+		return -EDOM;
+
+	/* expect strict spec conformance for the descriptors, but
+	 * cope with firmware which stores them in the wrong place
+	 */
+	if (len == 0 && dev->udev->actconfig->extralen) {
+		/* Motorola SB4100 (and others: Brad Hards says it's
+		 * from a Broadcom design) put CDC descriptors here
+		 */
+		buf = dev->udev->actconfig->extra;
+		len = dev->udev->actconfig->extralen;
+		dev_dbg(&intf->dev, "CDC descriptors on config\n");
+	}
+
+	/* Maybe CDC descriptors are after the endpoint?  This bug has
+	 * been seen on some 2Wire Inc RNDIS-ish products.
+	 */
+	if (len == 0) {
+		struct usb_host_endpoint	*hep;
+
+		hep = intf->cur_altsetting->endpoint;
+		if (hep) {
+			buf = hep->extra;
+			len = hep->extralen;
+		}
+		if (len)
+			dev_dbg(&intf->dev,
+				"CDC descriptors on endpoint\n");
+	}
+
+	/* this assumes that if there's a non-RNDIS vendor variant
+	 * of cdc-acm, it'll fail RNDIS requests cleanly.
+	 */
+	rndis = (is_rndis(&intf->cur_altsetting->desc) ||
+		 is_activesync(&intf->cur_altsetting->desc) ||
+		 is_wireless_rndis(&intf->cur_altsetting->desc) ||
+		 is_novatel_rndis(&intf->cur_altsetting->desc));
+
+	memset(info, 0, sizeof(*info));
+	info->control = intf;
+
+	cdc_parse_cdc_header(&header, intf, buf, len);
+
+	info->u = header.usb_cdc_union_desc;
+	info->header = header.usb_cdc_header_desc;
+	info->ether = header.usb_cdc_ether_desc;
+	if (!info->u) {
+		if (rndis)
+			goto skip;
+		else /* in that case a quirk is mandatory */
+			goto bad_desc;
+	}
+	/* we need a master/control interface (what we're
+	 * probed with) and a slave/data interface; union
+	 * descriptors sort this all out.
+	 */
+	info->control = usb_ifnum_to_if(dev->udev, info->u->bMasterInterface0);
+	info->data = usb_ifnum_to_if(dev->udev, info->u->bSlaveInterface0);
+	if (!info->control || !info->data) {
+		dev_dbg(&intf->dev,
+			"master #%u/%p slave #%u/%p\n",
+			info->u->bMasterInterface0,
+			info->control,
+			info->u->bSlaveInterface0,
+			info->data);
+		/* fall back to hard-wiring for RNDIS */
+		if (rndis) {
+			android_rndis_quirk = true;
+			goto skip;
+		}
+		goto bad_desc;
+	}
+	if (info->control != intf) {
+		dev_dbg(&intf->dev, "bogus CDC Union\n");
+		/* Ambit USB Cable Modem (and maybe others)
+		 * interchanges master and slave interface.
+		 */
+		if (info->data == intf) {
+			info->data = info->control;
+			info->control = intf;
+		} else
+			goto bad_desc;
+	}
+
+	/* some devices merge these - skip class check */
+	if (info->control == info->data)
+		goto skip;
+
+	/* a data interface altsetting does the real i/o */
+	d = &info->data->cur_altsetting->desc;
+	if (d->bInterfaceClass != USB_CLASS_CDC_DATA) {
+		dev_dbg(&intf->dev, "slave class %u\n", d->bInterfaceClass);
+		goto bad_desc;
+	}
+skip:
+	/* Communication class functions with bmCapabilities are not
+	 * RNDIS.  But some Wireless class RNDIS functions use
+	 * bmCapabilities for their own purpose. The failsafe is
+	 * therefore applied only to Communication class RNDIS
+	 * functions.  The rndis test is redundant, but a cheap
+	 * optimization.
+	 */
+	if (rndis && is_rndis(&intf->cur_altsetting->desc) &&
+	    header.usb_cdc_acm_descriptor &&
+	    header.usb_cdc_acm_descriptor->bmCapabilities) {
+		dev_dbg(&intf->dev,
+			"ACM capabilities %02x, not really RNDIS?\n",
+			header.usb_cdc_acm_descriptor->bmCapabilities);
+		goto bad_desc;
+	}
+
+	if (header.usb_cdc_ether_desc && info->ether->wMaxSegmentSize) {
+		dev->hard_mtu = le16_to_cpu(info->ether->wMaxSegmentSize);
+		/* because of Zaurus, we may be ignoring the host
+		 * side link address we were given.
+		 */
+	}
+
+	if (header.usb_cdc_mdlm_desc &&
+	    memcmp(header.usb_cdc_mdlm_desc->bGUID, mbm_guid, 16)) {
+		dev_dbg(&intf->dev, "GUID doesn't match\n");
+		goto bad_desc;
+	}
+
+	if (header.usb_cdc_mdlm_detail_desc &&
+		header.usb_cdc_mdlm_detail_desc->bLength <
+			(sizeof(struct usb_cdc_mdlm_detail_desc) + 1)) {
+		dev_dbg(&intf->dev, "Descriptor too short\n");
+		goto bad_desc;
+	}
+
+
+
+	/* Microsoft ActiveSync based and some regular RNDIS devices lack the
+	 * CDC descriptors, so we'll hard-wire the interfaces and not check
+	 * for descriptors.
+	 *
+	 * Some Android RNDIS devices have a CDC Union descriptor pointing
+	 * to non-existing interfaces.  Ignore that and attempt the same
+	 * hard-wired 0 and 1 interfaces.
+	 */
+	if (rndis && (!info->u || android_rndis_quirk)) {
+		info->control = usb_ifnum_to_if(dev->udev, 0);
+		info->data = usb_ifnum_to_if(dev->udev, 1);
+		if (!info->control || !info->data || info->control != intf) {
+			dev_dbg(&intf->dev,
+				"rndis: master #0/%p slave #1/%p\n",
+				info->control,
+				info->data);
+			goto bad_desc;
+		}
+
+	} else if (!info->header || (!rndis && !info->ether)) {
+		dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
+			info->header ? "" : "header ",
+			info->u ? "" : "union ",
+			info->ether ? "" : "ether ");
+		goto bad_desc;
+	}
+
+	/* claim data interface and set it up ... with side effects.
+	 * network traffic can't flow until an altsetting is enabled.
+	 */
+	if (info->data != info->control) {
+		status = usb_driver_claim_interface(driver, info->data, dev);
+		if (status < 0)
+			return status;
+	}
+	status = usbnet_get_endpoints(dev, info->data);
+	if (status < 0) {
+		/* ensure immediate exit from usbnet_disconnect */
+		usb_set_intfdata(info->data, NULL);
+		if (info->data != info->control)
+			usb_driver_release_interface(driver, info->data);
+		return status;
+	}
+
+	/* status endpoint: optional for CDC Ethernet, not RNDIS (or ACM) */
+	if (info->data != info->control)
+		dev->status = NULL;
+	if (info->control->cur_altsetting->desc.bNumEndpoints == 1) {
+		struct usb_endpoint_descriptor	*desc;
+
+		dev->status = &info->control->cur_altsetting->endpoint[0];
+		desc = &dev->status->desc;
+		if (!usb_endpoint_is_int_in(desc) ||
+		    (le16_to_cpu(desc->wMaxPacketSize)
+		     < sizeof(struct usb_cdc_notification)) ||
+		    !desc->bInterval) {
+			dev_dbg(&intf->dev, "bad notification endpoint\n");
+			dev->status = NULL;
+		}
+	}
+	if (rndis && !dev->status) {
+		dev_dbg(&intf->dev, "missing RNDIS status endpoint\n");
+		usb_set_intfdata(info->data, NULL);
+		usb_driver_release_interface(driver, info->data);
+		return -ENODEV;
+	}
+
+	/* override ethtool_ops */
+	dev->net->ethtool_ops = &cdc_ether_ethtool_ops;
+
+	return 0;
+
+bad_desc:
+	dev_info(&dev->udev->dev, "bad CDC descriptors\n");
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(usbnet_generic_cdc_bind);
+
+
+/* like usbnet_generic_cdc_bind() but handles filter initialization
+ * correctly
+ */
+int usbnet_ether_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int rv;
+
+	rv = usbnet_generic_cdc_bind(dev, intf);
+	if (rv < 0)
+		goto bail_out;
+
+	/* Some devices don't initialise properly. In particular
+	 * the packet filter is not reset. There are devices that
+	 * don't do reset all the way. So the packet filter should
+	 * be set to a sane initial value.
+	 */
+	usbnet_cdc_update_filter(dev);
+
+bail_out:
+	return rv;
+}
+EXPORT_SYMBOL_GPL(usbnet_ether_cdc_bind);
+
+void usbnet_cdc_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct cdc_state		*info = (void *) &dev->data;
+	struct usb_driver		*driver = driver_of(intf);
+
+	/* combined interface - nothing  to do */
+	if (info->data == info->control)
+		return;
+
+	/* disconnect master --> disconnect slave */
+	if (intf == info->control && info->data) {
+		/* ensure immediate exit from usbnet_disconnect */
+		usb_set_intfdata(info->data, NULL);
+		usb_driver_release_interface(driver, info->data);
+		info->data = NULL;
+	}
+
+	/* and vice versa (just in case) */
+	else if (intf == info->data && info->control) {
+		/* ensure immediate exit from usbnet_disconnect */
+		usb_set_intfdata(info->control, NULL);
+		usb_driver_release_interface(driver, info->control);
+		info->control = NULL;
+	}
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_unbind);
+
+/* Communications Device Class, Ethernet Control model
+ *
+ * Takes two interfaces.  The DATA interface is inactive till an altsetting
+ * is selected.  Configuration data includes class descriptors.  There's
+ * an optional status endpoint on the control interface.
+ *
+ * This should interop with whatever the 2.4 "CDCEther.c" driver
+ * (by Brad Hards) talked with, with more functionality.
+ */
+
+static void speed_change(struct usbnet *dev, __le32 *speeds)
+{
+	dev->tx_speed = __le32_to_cpu(speeds[0]);
+	dev->rx_speed = __le32_to_cpu(speeds[1]);
+}
+
+void usbnet_cdc_status(struct usbnet *dev, struct urb *urb)
+{
+	struct usb_cdc_notification	*event;
+
+	if (urb->actual_length < sizeof(*event))
+		return;
+
+	/* SPEED_CHANGE can get split into two 8-byte packets */
+	if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
+		speed_change(dev, (__le32 *) urb->transfer_buffer);
+		return;
+	}
+
+	event = urb->transfer_buffer;
+	switch (event->bNotificationType) {
+	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+		netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
+			  event->wValue ? "on" : "off");
+		usbnet_link_change(dev, !!event->wValue, 0);
+		break;
+	case USB_CDC_NOTIFY_SPEED_CHANGE:	/* tx/rx rates */
+		netif_dbg(dev, timer, dev->net, "CDC: speed change (len %d)\n",
+			  urb->actual_length);
+		if (urb->actual_length != (sizeof(*event) + 8))
+			set_bit(EVENT_STS_SPLIT, &dev->flags);
+		else
+			speed_change(dev, (__le32 *) &event[1]);
+		break;
+	/* USB_CDC_NOTIFY_RESPONSE_AVAILABLE can happen too (e.g. RNDIS),
+	 * but there are no standard formats for the response data.
+	 */
+	default:
+		netdev_err(dev->net, "CDC: unexpected notification %02x!\n",
+			   event->bNotificationType);
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_status);
+
+int usbnet_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int				status;
+	struct cdc_state		*info = (void *) &dev->data;
+
+	BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data)
+			< sizeof(struct cdc_state)));
+
+	status = usbnet_ether_cdc_bind(dev, intf);
+	if (status < 0)
+		return status;
+
+	status = usbnet_get_ethernet_addr(dev, info->ether->iMACAddress);
+	if (status < 0) {
+		usb_set_intfdata(info->data, NULL);
+		usb_driver_release_interface(driver_of(intf), info->data);
+		return status;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
+
+static int usbnet_cdc_zte_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = usbnet_cdc_bind(dev, intf);
+
+	if (!status && (dev->net->dev_addr[0] & 0x02))
+		eth_hw_addr_random(dev->net);
+
+	return status;
+}
+
+/* Make sure packets have correct destination MAC address
+ *
+ * A firmware bug observed on some devices (ZTE MF823/831/910) is that the
+ * device sends packets with a static, bogus, random MAC address (event if
+ * device MAC address has been updated). Always set MAC address to that of the
+ * device.
+ */
+int usbnet_cdc_zte_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	if (skb->len < ETH_HLEN || !(skb->data[0] & 0x02))
+		return 1;
+
+	skb_reset_mac_header(skb);
+	ether_addr_copy(eth_hdr(skb)->h_dest, dev->net->dev_addr);
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(usbnet_cdc_zte_rx_fixup);
+
+/* Ensure correct link state
+ *
+ * Some devices (ZTE MF823/831/910) export two carrier on notifications when
+ * connected. This causes the link state to be incorrect. Work around this by
+ * always setting the state to off, then on.
+ */
+static void usbnet_cdc_zte_status(struct usbnet *dev, struct urb *urb)
+{
+	struct usb_cdc_notification *event;
+
+	if (urb->actual_length < sizeof(*event))
+		return;
+
+	event = urb->transfer_buffer;
+
+	if (event->bNotificationType != USB_CDC_NOTIFY_NETWORK_CONNECTION) {
+		usbnet_cdc_status(dev, urb);
+		return;
+	}
+
+	netif_dbg(dev, timer, dev->net, "CDC: carrier %s\n",
+		  event->wValue ? "on" : "off");
+
+	if (event->wValue &&
+	    netif_carrier_ok(dev->net))
+		netif_carrier_off(dev->net);
+
+	usbnet_link_change(dev, !!event->wValue, 0);
+}
+
+static const struct driver_info	cdc_info = {
+	.description =	"CDC Ethernet Device",
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT,
+	.bind =		usbnet_cdc_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.status =	usbnet_cdc_status,
+	.set_rx_mode =	usbnet_cdc_update_filter,
+	.manage_power =	usbnet_manage_power,
+};
+
+static const struct driver_info	zte_cdc_info = {
+	.description =	"ZTE CDC Ethernet Device",
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT,
+	.bind =		usbnet_cdc_zte_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.status =	usbnet_cdc_zte_status,
+	.set_rx_mode =	usbnet_cdc_update_filter,
+	.manage_power =	usbnet_manage_power,
+	.rx_fixup = usbnet_cdc_zte_rx_fixup,
+};
+
+static const struct driver_info wwan_info = {
+	.description =	"Mobile Broadband Network Device",
+	.flags =	FLAG_WWAN,
+	.bind =		usbnet_cdc_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.status =	usbnet_cdc_status,
+	.set_rx_mode =	usbnet_cdc_update_filter,
+	.manage_power =	usbnet_manage_power,
+};
+
+/*-------------------------------------------------------------------------*/
+
+#define HUAWEI_VENDOR_ID	0x12D1
+#define NOVATEL_VENDOR_ID	0x1410
+#define ZTE_VENDOR_ID		0x19D2
+#define DELL_VENDOR_ID		0x413C
+#define REALTEK_VENDOR_ID	0x0bda
+#define SAMSUNG_VENDOR_ID	0x04e8
+#define LENOVO_VENDOR_ID	0x17ef
+#define LINKSYS_VENDOR_ID	0x13b1
+#define NVIDIA_VENDOR_ID	0x0955
+#define HP_VENDOR_ID		0x03f0
+#define MICROSOFT_VENDOR_ID	0x045e
+#define UBLOX_VENDOR_ID		0x1546
+#define TPLINK_VENDOR_ID	0x2357
+#define AQUANTIA_VENDOR_ID	0x2eca
+#define ASIX_VENDOR_ID		0x0b95
+
+static const struct usb_device_id	products[] = {
+/* BLACKLIST !!
+ *
+ * First blacklist any products that are egregiously nonconformant
+ * with the CDC Ethernet specs.  Minor braindamage we cope with; when
+ * they're not even trying, needing a separate driver is only the first
+ * of the differences to show up.
+ */
+
+#define	ZAURUS_MASTER_INTERFACE \
+	.bInterfaceClass	= USB_CLASS_COMM, \
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET, \
+	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
+
+#define ZAURUS_FAKE_INTERFACE \
+	.bInterfaceClass	= USB_CLASS_COMM, \
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_MDLM, \
+	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible;
+ * wire-incompatible with true CDC Ethernet implementations.
+ * (And, it seems, needlessly so...)
+ */
+{
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8004,
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info		= 0,
+},
+
+/* PXA-25x based Sharp Zaurii.  Note that it seems some of these
+ * (later models especially) may have shipped only with firmware
+ * advertising false "CDC MDLM" compatibility ... but we're not
+ * clear which models did that, so for now let's assume the worst.
+ */
+{
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8005,	/* A-300 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info		= 0,
+}, {
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8005,   /* A-300 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info        = 0,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8006,	/* B-500/SL-5600 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info		= 0,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8006,   /* B-500/SL-5600 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info        = 0,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8007,	/* C-700 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info		= 0,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8007,   /* C-700 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info        = 0,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	.idProduct              = 0x9031,	/* C-750 C-760 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info		= 0,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	.idProduct              = 0x9032,	/* SL-6000 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info		= 0,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	.idProduct              = 0x9032,	/* SL-6000 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info		= 0,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	/* reported with some C860 units */
+	.idProduct              = 0x9050,	/* C-860 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info		= 0,
+},
+
+/* Olympus has some models with a Zaurus-compatible option.
+ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
+ */
+{
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x07B4,
+	.idProduct              = 0x0F02,	/* R-1000 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info		= 0,
+},
+
+/* LG Electronics VL600 wants additional headers on every frame */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info		= 0,
+},
+
+/* Novatel USB551L and MC551 - handled by qmi_wwan */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0xB001, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Novatel E362 - handled by qmi_wwan */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9010, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8195, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Dell Wireless 5800 (Novatel E362) - handled by qmi_wwan */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x8196, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Dell Wireless 5804 (Novatel E371) - handled by qmi_wwan */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x819b, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Novatel Expedite E371 - handled by qmi_wwan */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(NOVATEL_VENDOR_ID, 0x9011, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* HP lt2523 (Novatel E371) - handled by qmi_wwan */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(HP_VENDOR_ID, 0x421d, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* AnyDATA ADU960S - handled by qmi_wwan */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Huawei E1820 - handled by qmi_wwan */
+{
+	USB_DEVICE_INTERFACE_NUMBER(HUAWEI_VENDOR_ID, 0x14ac, 1),
+	.driver_info = 0,
+},
+
+/* Realtek RTL8152 Based USB 2.0 Ethernet Adapters */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8152, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(REALTEK_VENDOR_ID, 0x8153, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Samsung USB Ethernet Adapters */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, 0xa101, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+#if IS_ENABLED(CONFIG_USB_RTL8152)
+/* Linksys USB3GIGV1 Ethernet Adapter */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LINKSYS_VENDOR_ID, 0x0041, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+#endif
+
+/* Lenovo ThinkPad OneLink+ Dock (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3054, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* ThinkPad USB-C Dock (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3062, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* ThinkPad Thunderbolt 3 Dock (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3069, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* ThinkPad Thunderbolt 3 Dock Gen 2 (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x3082, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Lenovo Thinkpad USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7205, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Lenovo USB C to Ethernet Adapter (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x720c, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Lenovo USB-C Travel Hub (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x7214, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0x721e, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* ThinkPad USB-C Dock Gen 2 (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(LENOVO_VENDOR_ID, 0xa387, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* NVIDIA Tegra USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(NVIDIA_VENDOR_ID, 0x09ff, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Microsoft Surface 2 dock (based on Realtek RTL8152) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07ab, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x07c6, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Microsoft Surface Ethernet Adapter (based on Realtek RTL8153B) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(MICROSOFT_VENDOR_ID, 0x0927, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* TP-LINK UE300 USB 3.0 Ethernet Adapters (based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, 0x0601, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* Aquantia AQtion USB to 5GbE Controller (based on AQC111U) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(AQUANTIA_VENDOR_ID, 0xc101,
+				      USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* ASIX USB 3.1 Gen1 to 5G Multi-Gigabit Ethernet Adapter(based on AQC111U) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(ASIX_VENDOR_ID, 0x2790, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* ASIX USB 3.1 Gen1 to 2.5G Multi-Gigabit Ethernet Adapter(based on AQC112U) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(ASIX_VENDOR_ID, 0x2791, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* USB-C 3.1 to 5GBASE-T Ethernet Adapter (based on AQC111U) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0xe05a, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* QNAP QNA-UC5G1T USB to 5GbE Adapter (based on AQC111U) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x1c04, 0x0015, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = 0,
+},
+
+/* WHITELIST!!!
+ *
+ * CDC Ether uses two interfaces, not necessarily consecutive.
+ * We match the main interface, ignoring the optional device
+ * class so we could handle devices that aren't exclusively
+ * CDC ether.
+ *
+ * NOTE:  this match must come AFTER entries blacklisting devices
+ * because of bugs/quirks in a given product (like Zaurus, above).
+ */
+{
+	/* ZTE (Vodafone) K3805-Z */
+	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1003, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* ZTE (Vodafone) K3806-Z */
+	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1015, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* ZTE (Vodafone) K4510-Z */
+	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1173, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* ZTE (Vodafone) K3770-Z */
+	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1177, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* ZTE (Vodafone) K3772-Z */
+	USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1181, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* Telit modules */
+	USB_VENDOR_AND_INTERFACE_INFO(0x1bc7, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = (kernel_ulong_t) &wwan_info,
+}, {
+	/* Dell DW5580 modules */
+	USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, 0x81ba, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = (kernel_ulong_t)&wwan_info,
+}, {
+	/* Huawei ME906 and ME909 */
+	USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x15c1, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* ZTE modules */
+	USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&zte_cdc_info,
+}, {
+	/* U-blox TOBY-L2 */
+	USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1143, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* U-blox SARA-U2 */
+	USB_DEVICE_AND_INTERFACE_INFO(UBLOX_VENDOR_ID, 0x1104, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* Cinterion PLS8 modem by GEMALTO */
+	USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0061, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* Cinterion AHS3 modem by GEMALTO */
+	USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0055, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* Cinterion PLS62-W modem by GEMALTO/THALES */
+	USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x005b, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	/* Cinterion PLS83/PLS63 modem by GEMALTO/THALES */
+	USB_DEVICE_AND_INTERFACE_INFO(0x1e2d, 0x0069, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET,
+				      USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+}, {
+	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ETHERNET,
+			USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &cdc_info,
+}, {
+	USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM,
+			USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&wwan_info,
+
+}, {
+	/* Various Huawei modems with a network port like the UMG1831 */
+	USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET, 255),
+	.driver_info = (unsigned long)&wwan_info,
+},
+	{ },		/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver cdc_driver = {
+	.name =		"cdc_ether",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.reset_resume =	usbnet_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(cdc_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB CDC Ethernet devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
new file mode 100644
index 000000000..cd4083e0b
--- /dev/null
+++ b/drivers/net/usb/cdc_mbim.c
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012  Smith Micro Software, Inc.
+ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
+ *
+ * This driver is based on and reuse most of cdc_ncm, which is
+ * Copyright (C) ST-Ericsson 2010-2012
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc-wdm.h>
+#include <linux/usb/cdc_ncm.h>
+#include <net/ipv6.h>
+#include <net/addrconf.h>
+#include <net/ipv6_stubs.h>
+#include <net/ndisc.h>
+
+/* alternative VLAN for IP session 0 if not untagged */
+#define MBIM_IPS0_VID	4094
+
+/* driver specific data - must match cdc_ncm usage */
+struct cdc_mbim_state {
+	struct cdc_ncm_ctx *ctx;
+	atomic_t pmcount;
+	struct usb_driver *subdriver;
+	unsigned long _unused;
+	unsigned long flags;
+};
+
+/* flags for the cdc_mbim_state.flags field */
+enum cdc_mbim_flags {
+	FLAG_IPS0_VLAN = 1 << 0,	/* IP session 0 is tagged  */
+};
+
+/* using a counter to merge subdriver requests with our own into a combined state */
+static int cdc_mbim_manage_power(struct usbnet *dev, int on)
+{
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	int rv = 0;
+
+	dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on);
+
+	if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) {
+		/* need autopm_get/put here to ensure the usbcore sees the new value */
+		rv = usb_autopm_get_interface(dev->intf);
+		dev->intf->needs_remote_wakeup = on;
+		if (!rv)
+			usb_autopm_put_interface(dev->intf);
+	}
+	return 0;
+}
+
+static int cdc_mbim_wdm_manage_power(struct usb_interface *intf, int status)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+
+	/* can be called while disconnecting */
+	if (!dev)
+		return 0;
+
+	return cdc_mbim_manage_power(dev, status);
+}
+
+static int cdc_mbim_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct cdc_mbim_state *info = (void *)&dev->data;
+
+	/* creation of this VLAN is a request to tag IP session 0 */
+	if (vid == MBIM_IPS0_VID)
+		info->flags |= FLAG_IPS0_VLAN;
+	else
+		if (vid >= 512)	/* we don't map these to MBIM session */
+			return -EINVAL;
+	return 0;
+}
+
+static int cdc_mbim_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct cdc_mbim_state *info = (void *)&dev->data;
+
+	/* this is a request for an untagged IP session 0 */
+	if (vid == MBIM_IPS0_VID)
+		info->flags &= ~FLAG_IPS0_VLAN;
+	return 0;
+}
+
+static const struct net_device_ops cdc_mbim_netdev_ops = {
+	.ndo_open             = usbnet_open,
+	.ndo_stop             = usbnet_stop,
+	.ndo_start_xmit       = usbnet_start_xmit,
+	.ndo_tx_timeout       = usbnet_tx_timeout,
+	.ndo_get_stats64      = dev_get_tstats64,
+	.ndo_change_mtu       = cdc_ncm_change_mtu,
+	.ndo_set_mac_address  = eth_mac_addr,
+	.ndo_validate_addr    = eth_validate_addr,
+	.ndo_vlan_rx_add_vid  = cdc_mbim_rx_add_vid,
+	.ndo_vlan_rx_kill_vid = cdc_mbim_rx_kill_vid,
+};
+
+/* Change the control interface altsetting and update the .driver_info
+ * pointer if the matching entry after changing class codes points to
+ * a different struct
+ */
+static int cdc_mbim_set_ctrlalt(struct usbnet *dev, struct usb_interface *intf, u8 alt)
+{
+	struct usb_driver *driver = to_usb_driver(intf->dev.driver);
+	const struct usb_device_id *id;
+	struct driver_info *info;
+	int ret;
+
+	ret = usb_set_interface(dev->udev,
+				intf->cur_altsetting->desc.bInterfaceNumber,
+				alt);
+	if (ret)
+		return ret;
+
+	id = usb_match_id(intf, driver->id_table);
+	if (!id)
+		return -ENODEV;
+
+	info = (struct driver_info *)id->driver_info;
+	if (info != dev->driver_info) {
+		dev_dbg(&intf->dev, "driver_info updated to '%s'\n",
+			info->description);
+		dev->driver_info = info;
+	}
+	return 0;
+}
+
+static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct cdc_ncm_ctx *ctx;
+	struct usb_driver *subdriver = ERR_PTR(-ENODEV);
+	int ret = -ENODEV;
+	u8 data_altsetting = 1;
+	struct cdc_mbim_state *info = (void *)&dev->data;
+
+	/* should we change control altsetting on a NCM/MBIM function? */
+	if (cdc_ncm_select_altsetting(intf) == CDC_NCM_COMM_ALTSETTING_MBIM) {
+		data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
+		ret = cdc_mbim_set_ctrlalt(dev, intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+		if (ret)
+			goto err;
+		ret = -ENODEV;
+	}
+
+	/* we will hit this for NCM/MBIM functions if prefer_mbim is false */
+	if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
+		goto err;
+
+	ret = cdc_ncm_bind_common(dev, intf, data_altsetting, dev->driver_info->data);
+	if (ret)
+		goto err;
+
+	ctx = info->ctx;
+
+	/* The MBIM descriptor and the status endpoint are required */
+	if (ctx->mbim_desc && dev->status)
+		subdriver = usb_cdc_wdm_register(ctx->control,
+						 &dev->status->desc,
+						 le16_to_cpu(ctx->mbim_desc->wMaxControlMessage),
+						 WWAN_PORT_MBIM,
+						 cdc_mbim_wdm_manage_power);
+	if (IS_ERR(subdriver)) {
+		ret = PTR_ERR(subdriver);
+		cdc_ncm_unbind(dev, intf);
+		goto err;
+	}
+
+	/* can't let usbnet use the interrupt endpoint */
+	dev->status = NULL;
+	info->subdriver = subdriver;
+
+	/* MBIM cannot do ARP */
+	dev->net->flags |= IFF_NOARP;
+
+	/* no need to put the VLAN tci in the packet headers */
+	dev->net->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_FILTER;
+
+	/* monitor VLAN additions and removals */
+	dev->net->netdev_ops = &cdc_mbim_netdev_ops;
+err:
+	return ret;
+}
+
+static void cdc_mbim_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+
+	/* disconnect subdriver from control interface */
+	if (info->subdriver && info->subdriver->disconnect)
+		info->subdriver->disconnect(ctx->control);
+	info->subdriver = NULL;
+
+	/* let NCM unbind clean up both control and data interface */
+	cdc_ncm_unbind(dev, intf);
+}
+
+/* verify that the ethernet protocol is IPv4 or IPv6 */
+static bool is_ip_proto(__be16 proto)
+{
+	switch (proto) {
+	case htons(ETH_P_IP):
+	case htons(ETH_P_IPV6):
+		return true;
+	}
+	return false;
+}
+
+static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *skb_out;
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+	__le32 sign = cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN);
+	u16 tci = 0;
+	bool is_ip;
+	u8 *c;
+
+	if (!ctx)
+		goto error;
+
+	if (skb) {
+		if (skb->len <= ETH_HLEN)
+			goto error;
+
+		/* Some applications using e.g. packet sockets will
+		 * bypass the VLAN acceleration and create tagged
+		 * ethernet frames directly.  We primarily look for
+		 * the accelerated out-of-band tag, but fall back if
+		 * required
+		 */
+		skb_reset_mac_header(skb);
+		if (vlan_get_tag(skb, &tci) < 0 && skb->len > VLAN_ETH_HLEN &&
+		    __vlan_get_tag(skb, &tci) == 0) {
+			is_ip = is_ip_proto(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
+			skb_pull(skb, VLAN_ETH_HLEN);
+		} else {
+			is_ip = is_ip_proto(eth_hdr(skb)->h_proto);
+			skb_pull(skb, ETH_HLEN);
+		}
+
+		/* Is IP session <0> tagged too? */
+		if (info->flags & FLAG_IPS0_VLAN) {
+			/* drop all untagged packets */
+			if (!tci)
+				goto error;
+			/* map MBIM_IPS0_VID to IPS<0> */
+			if (tci == MBIM_IPS0_VID)
+				tci = 0;
+		}
+
+		/* mapping VLANs to MBIM sessions:
+		 *   no tag     => IPS session <0> if !FLAG_IPS0_VLAN
+		 *   1 - 255    => IPS session <vlanid>
+		 *   256 - 511  => DSS session <vlanid - 256>
+		 *   512 - 4093 => unsupported, drop
+		 *   4094       => IPS session <0> if FLAG_IPS0_VLAN
+		 */
+
+		switch (tci & 0x0f00) {
+		case 0x0000: /* VLAN ID 0 - 255 */
+			if (!is_ip)
+				goto error;
+			c = (u8 *)&sign;
+			c[3] = tci;
+			break;
+		case 0x0100: /* VLAN ID 256 - 511 */
+			if (is_ip)
+				goto error;
+			sign = cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN);
+			c = (u8 *)&sign;
+			c[3] = tci;
+			break;
+		default:
+			netif_err(dev, tx_err, dev->net,
+				  "unsupported tci=0x%04x\n", tci);
+			goto error;
+		}
+	}
+
+	spin_lock_bh(&ctx->mtx);
+	skb_out = cdc_ncm_fill_tx_frame(dev, skb, sign);
+	spin_unlock_bh(&ctx->mtx);
+	return skb_out;
+
+error:
+	if (skb)
+		dev_kfree_skb_any(skb);
+
+	return NULL;
+}
+
+/* Some devices are known to send Neighbor Solicitation messages and
+ * require Neighbor Advertisement replies.  The IPv6 core will not
+ * respond since IFF_NOARP is set, so we must handle them ourselves.
+ */
+static void do_neigh_solicit(struct usbnet *dev, u8 *buf, u16 tci)
+{
+	struct ipv6hdr *iph = (void *)buf;
+	struct nd_msg *msg = (void *)(iph + 1);
+	struct net_device *netdev;
+	struct inet6_dev *in6_dev;
+	bool is_router;
+
+	/* we'll only respond to requests from unicast addresses to
+	 * our solicited node addresses.
+	 */
+	if (!ipv6_addr_is_solict_mult(&iph->daddr) ||
+	    !(ipv6_addr_type(&iph->saddr) & IPV6_ADDR_UNICAST))
+		return;
+
+	/* need to send the NA on the VLAN dev, if any */
+	rcu_read_lock();
+	if (tci) {
+		netdev = __vlan_find_dev_deep_rcu(dev->net, htons(ETH_P_8021Q),
+						  tci);
+		if (!netdev) {
+			rcu_read_unlock();
+			return;
+		}
+	} else {
+		netdev = dev->net;
+	}
+	dev_hold(netdev);
+	rcu_read_unlock();
+
+	in6_dev = in6_dev_get(netdev);
+	if (!in6_dev)
+		goto out;
+	is_router = !!in6_dev->cnf.forwarding;
+	in6_dev_put(in6_dev);
+
+	/* ipv6_stub != NULL if in6_dev_get returned an inet6_dev */
+	ipv6_stub->ndisc_send_na(netdev, &iph->saddr, &msg->target,
+				 is_router /* router */,
+				 true /* solicited */,
+				 false /* override */,
+				 true /* inc_opt */);
+out:
+	dev_put(netdev);
+}
+
+static bool is_neigh_solicit(u8 *buf, size_t len)
+{
+	struct ipv6hdr *iph = (void *)buf;
+	struct nd_msg *msg = (void *)(iph + 1);
+
+	return (len >= sizeof(struct ipv6hdr) + sizeof(struct nd_msg) &&
+		iph->nexthdr == IPPROTO_ICMPV6 &&
+		msg->icmph.icmp6_code == 0 &&
+		msg->icmph.icmp6_type == NDISC_NEIGHBOUR_SOLICITATION);
+}
+
+
+static struct sk_buff *cdc_mbim_process_dgram(struct usbnet *dev, u8 *buf, size_t len, u16 tci)
+{
+	__be16 proto = htons(ETH_P_802_3);
+	struct sk_buff *skb = NULL;
+
+	if (tci < 256 || tci == MBIM_IPS0_VID) { /* IPS session? */
+		if (len < sizeof(struct iphdr))
+			goto err;
+
+		switch (*buf & 0xf0) {
+		case 0x40:
+			proto = htons(ETH_P_IP);
+			break;
+		case 0x60:
+			if (is_neigh_solicit(buf, len))
+				do_neigh_solicit(dev, buf, tci);
+			proto = htons(ETH_P_IPV6);
+			break;
+		default:
+			goto err;
+		}
+	}
+
+	skb = netdev_alloc_skb_ip_align(dev->net,  len + ETH_HLEN);
+	if (!skb)
+		goto err;
+
+	/* add an ethernet header */
+	skb_put(skb, ETH_HLEN);
+	skb_reset_mac_header(skb);
+	eth_hdr(skb)->h_proto = proto;
+	eth_zero_addr(eth_hdr(skb)->h_source);
+	memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
+
+	/* add datagram */
+	skb_put_data(skb, buf, len);
+
+	/* map MBIM session to VLAN */
+	if (tci)
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tci);
+err:
+	return skb;
+}
+
+static int cdc_mbim_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in)
+{
+	struct sk_buff *skb;
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+	int len;
+	int nframes;
+	int x;
+	int offset;
+	struct usb_cdc_ncm_ndp16 *ndp16;
+	struct usb_cdc_ncm_dpe16 *dpe16;
+	int ndpoffset;
+	int loopcount = 50; /* arbitrary max preventing infinite loop */
+	u32 payload = 0;
+	u8 *c;
+	u16 tci;
+
+	ndpoffset = cdc_ncm_rx_verify_nth16(ctx, skb_in);
+	if (ndpoffset < 0)
+		goto error;
+
+next_ndp:
+	nframes = cdc_ncm_rx_verify_ndp16(skb_in, ndpoffset);
+	if (nframes < 0)
+		goto error;
+
+	ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset);
+
+	switch (ndp16->dwSignature & cpu_to_le32(0x00ffffff)) {
+	case cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN):
+		c = (u8 *)&ndp16->dwSignature;
+		tci = c[3];
+		/* tag IPS<0> packets too if MBIM_IPS0_VID exists */
+		if (!tci && info->flags & FLAG_IPS0_VLAN)
+			tci = MBIM_IPS0_VID;
+		break;
+	case cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN):
+		c = (u8 *)&ndp16->dwSignature;
+		tci = c[3] + 256;
+		break;
+	default:
+		netif_dbg(dev, rx_err, dev->net,
+			  "unsupported NDP signature <0x%08x>\n",
+			  le32_to_cpu(ndp16->dwSignature));
+		goto err_ndp;
+
+	}
+
+	dpe16 = ndp16->dpe16;
+	for (x = 0; x < nframes; x++, dpe16++) {
+		offset = le16_to_cpu(dpe16->wDatagramIndex);
+		len = le16_to_cpu(dpe16->wDatagramLength);
+
+		/*
+		 * CDC NCM ch. 3.7
+		 * All entries after first NULL entry are to be ignored
+		 */
+		if ((offset == 0) || (len == 0)) {
+			if (!x)
+				goto err_ndp; /* empty NTB */
+			break;
+		}
+
+		/* sanity checking */
+		if (((offset + len) > skb_in->len) || (len > ctx->rx_max)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n",
+				  x, offset, len, skb_in);
+			if (!x)
+				goto err_ndp;
+			break;
+		} else {
+			skb = cdc_mbim_process_dgram(dev, skb_in->data + offset, len, tci);
+			if (!skb)
+				goto error;
+			usbnet_skb_return(dev, skb);
+			payload += len;	/* count payload bytes in this NTB */
+		}
+	}
+err_ndp:
+	/* are there more NDPs to process? */
+	ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex);
+	if (ndpoffset && loopcount--)
+		goto next_ndp;
+
+	/* update stats */
+	ctx->rx_overhead += skb_in->len - payload;
+	ctx->rx_ntbs++;
+
+	return 1;
+error:
+	return 0;
+}
+
+static int cdc_mbim_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	int ret = -ENODEV;
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+
+	if (!ctx)
+		goto error;
+
+	/*
+	 * Both usbnet_suspend() and subdriver->suspend() MUST return 0
+	 * in system sleep context, otherwise, the resume callback has
+	 * to recover device from previous suspend failure.
+	 */
+	ret = usbnet_suspend(intf, message);
+	if (ret < 0)
+		goto error;
+
+	if (intf == ctx->control && info->subdriver && info->subdriver->suspend)
+		ret = info->subdriver->suspend(intf, message);
+	if (ret < 0)
+		usbnet_resume(intf);
+
+error:
+	return ret;
+}
+
+static int cdc_mbim_resume(struct usb_interface *intf)
+{
+	int  ret = 0;
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+	bool callsub = (intf == ctx->control && info->subdriver && info->subdriver->resume);
+
+	if (callsub)
+		ret = info->subdriver->resume(intf);
+	if (ret < 0)
+		goto err;
+	ret = usbnet_resume(intf);
+	if (ret < 0 && callsub)
+		info->subdriver->suspend(intf, PMSG_SUSPEND);
+err:
+	return ret;
+}
+
+static const struct driver_info cdc_mbim_info = {
+	.description = "CDC MBIM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
+	.bind = cdc_mbim_bind,
+	.unbind = cdc_mbim_unbind,
+	.manage_power = cdc_mbim_manage_power,
+	.rx_fixup = cdc_mbim_rx_fixup,
+	.tx_fixup = cdc_mbim_tx_fixup,
+};
+
+/* MBIM and NCM devices should not need a ZLP after NTBs with
+ * dwNtbOutMaxSize length. Nevertheless, a number of devices from
+ * different vendor IDs will fail unless we send ZLPs, forcing us
+ * to make this the default.
+ *
+ * This default may cause a performance penalty for spec conforming
+ * devices wanting to take advantage of optimizations possible without
+ * ZLPs.  A whitelist is added in an attempt to avoid this for devices
+ * known to conform to the MBIM specification.
+ *
+ * All known devices supporting NCM compatibility mode are also
+ * conforming to the NCM and MBIM specifications. For this reason, the
+ * NCM subclass entry is also in the ZLP whitelist.
+ */
+static const struct driver_info cdc_mbim_info_zlp = {
+	.description = "CDC MBIM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
+	.bind = cdc_mbim_bind,
+	.unbind = cdc_mbim_unbind,
+	.manage_power = cdc_mbim_manage_power,
+	.rx_fixup = cdc_mbim_rx_fixup,
+	.tx_fixup = cdc_mbim_tx_fixup,
+};
+
+/* The spefication explicitly allows NDPs to be placed anywhere in the
+ * frame, but some devices fail unless the NDP is placed after the IP
+ * packets.  Using the CDC_NCM_FLAG_NDP_TO_END flags to force this
+ * behaviour.
+ *
+ * Note: The current implementation of this feature restricts each NTB
+ * to a single NDP, implying that multiplexed sessions cannot share an
+ * NTB. This might affect performance for multiplexed sessions.
+ */
+static const struct driver_info cdc_mbim_info_ndp_to_end = {
+	.description = "CDC MBIM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
+	.bind = cdc_mbim_bind,
+	.unbind = cdc_mbim_unbind,
+	.manage_power = cdc_mbim_manage_power,
+	.rx_fixup = cdc_mbim_rx_fixup,
+	.tx_fixup = cdc_mbim_tx_fixup,
+	.data = CDC_NCM_FLAG_NDP_TO_END,
+};
+
+/* Some modems (e.g. Telit LE922A6) do not work properly with altsetting
+ * toggle done in cdc_ncm_bind_common. CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE
+ * flag is used to avoid this procedure.
+ */
+static const struct driver_info cdc_mbim_info_avoid_altsetting_toggle = {
+	.description = "CDC MBIM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
+	.bind = cdc_mbim_bind,
+	.unbind = cdc_mbim_unbind,
+	.manage_power = cdc_mbim_manage_power,
+	.rx_fixup = cdc_mbim_rx_fixup,
+	.tx_fixup = cdc_mbim_tx_fixup,
+	.data = CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE,
+};
+
+static const struct usb_device_id mbim_devs[] = {
+	/* This duplicate NCM entry is intentional. MBIM devices can
+	 * be disguised as NCM by default, and this is necessary to
+	 * allow us to bind the correct driver_info to such devices.
+	 *
+	 * bind() will sort out this for us, selecting the correct
+	 * entry and reject the other
+	 */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info,
+	},
+	/* ZLP conformance whitelist: All Ericsson MBIM devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bdb, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info,
+	},
+
+	/* Some Huawei devices, ME906s-158 (12d1:15c1) and E3372
+	 * (12d1:157d), are known to fail unless the NDP is placed
+	 * after the IP packets.  Applying the quirk to all Huawei
+	 * devices is broader than necessary, but harmless.
+	 */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_ndp_to_end,
+	},
+
+	/* The HP lt4132 (03f0:a31d) is a rebranded Huawei ME906s-158,
+	 * therefore it too requires the above "NDP to end" quirk.
+	 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_ndp_to_end,
+	},
+
+	/* Telit LE922A6 in MBIM composition */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1041, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
+	/* Telit LN920 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1061, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
+	/* Telit FN990 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1071, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
+	/* Telit FE990 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1081, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
+	/* default entry */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_zlp,
+	},
+	{
+	},
+};
+MODULE_DEVICE_TABLE(usb, mbim_devs);
+
+static struct usb_driver cdc_mbim_driver = {
+	.name = "cdc_mbim",
+	.id_table = mbim_devs,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = cdc_mbim_suspend,
+	.resume = cdc_mbim_resume,
+	.reset_resume =	cdc_mbim_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+module_usb_driver(cdc_mbim_driver);
+
+MODULE_AUTHOR("Greg Suarez <gsuarez@smithmicro.com>");
+MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
+MODULE_DESCRIPTION("USB CDC MBIM host driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
new file mode 100644
index 000000000..789e3647f
--- /dev/null
+++ b/drivers/net/usb/cdc_ncm.c
@@ -0,0 +1,2069 @@
+/*
+ * cdc_ncm.c
+ *
+ * Copyright (C) ST-Ericsson 2010-2012
+ * Contact: Alexey Orishko <alexey.orishko@stericsson.com>
+ * Original author: Hans Petter Selasky <hans.petter.selasky@stericsson.com>
+ *
+ * USB Host Driver for Network Control Model (NCM)
+ * http://www.usb.org/developers/docs/devclass_docs/NCM10_012011.zip
+ *
+ * The NCM encoding, decoding and initialization logic
+ * derives from FreeBSD 8.x. if_cdce.c and if_cdcereg.h
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose this file to be licensed under the terms
+ * of the GNU General Public License (GPL) Version 2 or the 2-clause
+ * BSD license listed below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ctype.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/hrtimer.h>
+#include <linux/atomic.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/cdc_ncm.h>
+
+#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
+static bool prefer_mbim = true;
+#else
+static bool prefer_mbim;
+#endif
+module_param(prefer_mbim, bool, 0644);
+MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
+
+static void cdc_ncm_txpath_bh(struct tasklet_struct *t);
+static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
+static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
+static struct usb_driver cdc_ncm_driver;
+
+struct cdc_ncm_stats {
+	char stat_string[ETH_GSTRING_LEN];
+	int sizeof_stat;
+	int stat_offset;
+};
+
+#define CDC_NCM_STAT(str, m) { \
+		.stat_string = str, \
+		.sizeof_stat = sizeof(((struct cdc_ncm_ctx *)0)->m), \
+		.stat_offset = offsetof(struct cdc_ncm_ctx, m) }
+#define CDC_NCM_SIMPLE_STAT(m)	CDC_NCM_STAT(__stringify(m), m)
+
+static const struct cdc_ncm_stats cdc_ncm_gstrings_stats[] = {
+	CDC_NCM_SIMPLE_STAT(tx_reason_ntb_full),
+	CDC_NCM_SIMPLE_STAT(tx_reason_ndp_full),
+	CDC_NCM_SIMPLE_STAT(tx_reason_timeout),
+	CDC_NCM_SIMPLE_STAT(tx_reason_max_datagram),
+	CDC_NCM_SIMPLE_STAT(tx_overhead),
+	CDC_NCM_SIMPLE_STAT(tx_ntbs),
+	CDC_NCM_SIMPLE_STAT(rx_overhead),
+	CDC_NCM_SIMPLE_STAT(rx_ntbs),
+};
+
+#define CDC_NCM_LOW_MEM_MAX_CNT 10
+
+static int cdc_ncm_get_sset_count(struct net_device __always_unused *netdev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return ARRAY_SIZE(cdc_ncm_gstrings_stats);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void cdc_ncm_get_ethtool_stats(struct net_device *netdev,
+				    struct ethtool_stats __always_unused *stats,
+				    u64 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	int i;
+	char *p = NULL;
+
+	for (i = 0; i < ARRAY_SIZE(cdc_ncm_gstrings_stats); i++) {
+		p = (char *)ctx + cdc_ncm_gstrings_stats[i].stat_offset;
+		data[i] = (cdc_ncm_gstrings_stats[i].sizeof_stat == sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+	}
+}
+
+static void cdc_ncm_get_strings(struct net_device __always_unused *netdev, u32 stringset, u8 *data)
+{
+	u8 *p = data;
+	int i;
+
+	switch (stringset) {
+	case ETH_SS_STATS:
+		for (i = 0; i < ARRAY_SIZE(cdc_ncm_gstrings_stats); i++) {
+			memcpy(p, cdc_ncm_gstrings_stats[i].stat_string, ETH_GSTRING_LEN);
+			p += ETH_GSTRING_LEN;
+		}
+	}
+}
+
+static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx);
+
+static const struct ethtool_ops cdc_ncm_ethtool_ops = {
+	.get_link		= usbnet_get_link,
+	.nway_reset		= usbnet_nway_reset,
+	.get_drvinfo		= usbnet_get_drvinfo,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_ts_info		= ethtool_op_get_ts_info,
+	.get_sset_count		= cdc_ncm_get_sset_count,
+	.get_strings		= cdc_ncm_get_strings,
+	.get_ethtool_stats	= cdc_ncm_get_ethtool_stats,
+	.get_link_ksettings	= usbnet_get_link_ksettings_internal,
+	.set_link_ksettings	= NULL,
+};
+
+static u32 cdc_ncm_check_rx_max(struct usbnet *dev, u32 new_rx)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	u32 val, max, min;
+
+	/* clamp new_rx to sane values */
+	min = USB_CDC_NCM_NTB_MIN_IN_SIZE;
+	max = min_t(u32, CDC_NCM_NTB_MAX_SIZE_RX, le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize));
+
+	/* dwNtbInMaxSize spec violation? Use MIN size for both limits */
+	if (max < min) {
+		dev_warn(&dev->intf->dev, "dwNtbInMaxSize=%u is too small. Using %u\n",
+			 le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize), min);
+		max = min;
+	}
+
+	val = clamp_t(u32, new_rx, min, max);
+	if (val != new_rx)
+		dev_dbg(&dev->intf->dev, "rx_max must be in the [%u, %u] range\n", min, max);
+
+	return val;
+}
+
+static u32 cdc_ncm_check_tx_max(struct usbnet *dev, u32 new_tx)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	u32 val, max, min;
+
+	/* clamp new_tx to sane values */
+	if (ctx->is_ndp16)
+		min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth16);
+	else
+		min = ctx->max_datagram_size + ctx->max_ndp_size + sizeof(struct usb_cdc_ncm_nth32);
+
+	if (le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) == 0)
+		max = CDC_NCM_NTB_MAX_SIZE_TX; /* dwNtbOutMaxSize not set */
+	else
+		max = clamp_t(u32, le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize),
+			      USB_CDC_NCM_NTB_MIN_OUT_SIZE,
+			      CDC_NCM_NTB_MAX_SIZE_TX);
+
+	/* some devices set dwNtbOutMaxSize too low for the above default */
+	min = min(min, max);
+
+	val = clamp_t(u32, new_tx, min, max);
+	if (val != new_tx)
+		dev_dbg(&dev->intf->dev, "tx_max must be in the [%u, %u] range\n", min, max);
+
+	return val;
+}
+
+static ssize_t min_tx_pkt_show(struct device *d,
+			       struct device_attribute *attr, char *buf)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	return sprintf(buf, "%u\n", ctx->min_tx_pkt);
+}
+
+static ssize_t rx_max_show(struct device *d,
+			   struct device_attribute *attr, char *buf)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	return sprintf(buf, "%u\n", ctx->rx_max);
+}
+
+static ssize_t tx_max_show(struct device *d,
+			   struct device_attribute *attr, char *buf)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	return sprintf(buf, "%u\n", ctx->tx_max);
+}
+
+static ssize_t tx_timer_usecs_show(struct device *d,
+				   struct device_attribute *attr, char *buf)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	return sprintf(buf, "%u\n", ctx->timer_interval / (u32)NSEC_PER_USEC);
+}
+
+static ssize_t min_tx_pkt_store(struct device *d,
+				struct device_attribute *attr,
+				const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	unsigned long val;
+
+	/* no need to restrict values - anything from 0 to infinity is OK */
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	ctx->min_tx_pkt = val;
+	return len;
+}
+
+static ssize_t rx_max_store(struct device *d,
+			    struct device_attribute *attr,
+			    const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	unsigned long val;
+
+	if (kstrtoul(buf, 0, &val) || cdc_ncm_check_rx_max(dev, val) != val)
+		return -EINVAL;
+
+	cdc_ncm_update_rxtx_max(dev, val, ctx->tx_max);
+	return len;
+}
+
+static ssize_t tx_max_store(struct device *d,
+			    struct device_attribute *attr,
+			    const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	unsigned long val;
+
+	if (kstrtoul(buf, 0, &val) || cdc_ncm_check_tx_max(dev, val) != val)
+		return -EINVAL;
+
+	cdc_ncm_update_rxtx_max(dev, ctx->rx_max, val);
+	return len;
+}
+
+static ssize_t tx_timer_usecs_store(struct device *d,
+				    struct device_attribute *attr,
+				    const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	ssize_t ret;
+	unsigned long val;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+	if (val && (val < CDC_NCM_TIMER_INTERVAL_MIN || val > CDC_NCM_TIMER_INTERVAL_MAX))
+		return -EINVAL;
+
+	spin_lock_bh(&ctx->mtx);
+	ctx->timer_interval = val * NSEC_PER_USEC;
+	if (!ctx->timer_interval)
+		ctx->tx_timer_pending = 0;
+	spin_unlock_bh(&ctx->mtx);
+	return len;
+}
+
+static DEVICE_ATTR_RW(min_tx_pkt);
+static DEVICE_ATTR_RW(rx_max);
+static DEVICE_ATTR_RW(tx_max);
+static DEVICE_ATTR_RW(tx_timer_usecs);
+
+static ssize_t ndp_to_end_show(struct device *d, struct device_attribute *attr, char *buf)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	return sprintf(buf, "%c\n", ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END ? 'Y' : 'N');
+}
+
+static ssize_t ndp_to_end_store(struct device *d,  struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	bool enable;
+
+	if (strtobool(buf, &enable))
+		return -EINVAL;
+
+	/* no change? */
+	if (enable == (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
+		return len;
+
+	if (enable) {
+		if (ctx->is_ndp16 && !ctx->delayed_ndp16) {
+			ctx->delayed_ndp16 = kzalloc(ctx->max_ndp_size, GFP_KERNEL);
+			if (!ctx->delayed_ndp16)
+				return -ENOMEM;
+		}
+		if (!ctx->is_ndp16 && !ctx->delayed_ndp32) {
+			ctx->delayed_ndp32 = kzalloc(ctx->max_ndp_size, GFP_KERNEL);
+			if (!ctx->delayed_ndp32)
+				return -ENOMEM;
+		}
+	}
+
+	/* flush pending data before changing flag */
+	netif_tx_lock_bh(dev->net);
+	usbnet_start_xmit(NULL, dev->net);
+	spin_lock_bh(&ctx->mtx);
+	if (enable)
+		ctx->drvflags |= CDC_NCM_FLAG_NDP_TO_END;
+	else
+		ctx->drvflags &= ~CDC_NCM_FLAG_NDP_TO_END;
+	spin_unlock_bh(&ctx->mtx);
+	netif_tx_unlock_bh(dev->net);
+
+	return len;
+}
+static DEVICE_ATTR_RW(ndp_to_end);
+
+#define NCM_PARM_ATTR(name, format, tocpu)				\
+static ssize_t cdc_ncm_show_##name(struct device *d, struct device_attribute *attr, char *buf) \
+{ \
+	struct usbnet *dev = netdev_priv(to_net_dev(d)); \
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0]; \
+	return sprintf(buf, format "\n", tocpu(ctx->ncm_parm.name));	\
+} \
+static DEVICE_ATTR(name, 0444, cdc_ncm_show_##name, NULL)
+
+NCM_PARM_ATTR(bmNtbFormatsSupported, "0x%04x", le16_to_cpu);
+NCM_PARM_ATTR(dwNtbInMaxSize, "%u", le32_to_cpu);
+NCM_PARM_ATTR(wNdpInDivisor, "%u", le16_to_cpu);
+NCM_PARM_ATTR(wNdpInPayloadRemainder, "%u", le16_to_cpu);
+NCM_PARM_ATTR(wNdpInAlignment, "%u", le16_to_cpu);
+NCM_PARM_ATTR(dwNtbOutMaxSize, "%u", le32_to_cpu);
+NCM_PARM_ATTR(wNdpOutDivisor, "%u", le16_to_cpu);
+NCM_PARM_ATTR(wNdpOutPayloadRemainder, "%u", le16_to_cpu);
+NCM_PARM_ATTR(wNdpOutAlignment, "%u", le16_to_cpu);
+NCM_PARM_ATTR(wNtbOutMaxDatagrams, "%u", le16_to_cpu);
+
+static struct attribute *cdc_ncm_sysfs_attrs[] = {
+	&dev_attr_min_tx_pkt.attr,
+	&dev_attr_ndp_to_end.attr,
+	&dev_attr_rx_max.attr,
+	&dev_attr_tx_max.attr,
+	&dev_attr_tx_timer_usecs.attr,
+	&dev_attr_bmNtbFormatsSupported.attr,
+	&dev_attr_dwNtbInMaxSize.attr,
+	&dev_attr_wNdpInDivisor.attr,
+	&dev_attr_wNdpInPayloadRemainder.attr,
+	&dev_attr_wNdpInAlignment.attr,
+	&dev_attr_dwNtbOutMaxSize.attr,
+	&dev_attr_wNdpOutDivisor.attr,
+	&dev_attr_wNdpOutPayloadRemainder.attr,
+	&dev_attr_wNdpOutAlignment.attr,
+	&dev_attr_wNtbOutMaxDatagrams.attr,
+	NULL,
+};
+
+static const struct attribute_group cdc_ncm_sysfs_attr_group = {
+	.name = "cdc_ncm",
+	.attrs = cdc_ncm_sysfs_attrs,
+};
+
+/* handle rx_max and tx_max changes */
+static void cdc_ncm_update_rxtx_max(struct usbnet *dev, u32 new_rx, u32 new_tx)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	u8 iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber;
+	u32 val;
+
+	val = cdc_ncm_check_rx_max(dev, new_rx);
+
+	/* inform device about NTB input size changes */
+	if (val != ctx->rx_max) {
+		__le32 dwNtbInMaxSize = cpu_to_le32(val);
+
+		dev_info(&dev->intf->dev, "setting rx_max = %u\n", val);
+
+		/* tell device to use new size */
+		if (usbnet_write_cmd(dev, USB_CDC_SET_NTB_INPUT_SIZE,
+				     USB_TYPE_CLASS | USB_DIR_OUT
+				     | USB_RECIP_INTERFACE,
+				     0, iface_no, &dwNtbInMaxSize, 4) < 0)
+			dev_dbg(&dev->intf->dev, "Setting NTB Input Size failed\n");
+		else
+			ctx->rx_max = val;
+	}
+
+	/* usbnet use these values for sizing rx queues */
+	if (dev->rx_urb_size != ctx->rx_max) {
+		dev->rx_urb_size = ctx->rx_max;
+		if (netif_running(dev->net))
+			usbnet_unlink_rx_urbs(dev);
+	}
+
+	val = cdc_ncm_check_tx_max(dev, new_tx);
+	if (val != ctx->tx_max)
+		dev_info(&dev->intf->dev, "setting tx_max = %u\n", val);
+
+	/* Adding a pad byte here if necessary simplifies the handling
+	 * in cdc_ncm_fill_tx_frame, making tx_max always represent
+	 * the real skb max size.
+	 *
+	 * We cannot use dev->maxpacket here because this is called from
+	 * .bind which is called before usbnet sets up dev->maxpacket
+	 */
+	if (val != le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize) &&
+	    val % usb_maxpacket(dev->udev, dev->out) == 0)
+		val++;
+
+	/* we might need to flush any pending tx buffers if running */
+	if (netif_running(dev->net) && val > ctx->tx_max) {
+		netif_tx_lock_bh(dev->net);
+		usbnet_start_xmit(NULL, dev->net);
+		/* make sure tx_curr_skb is reallocated if it was empty */
+		if (ctx->tx_curr_skb) {
+			dev_kfree_skb_any(ctx->tx_curr_skb);
+			ctx->tx_curr_skb = NULL;
+		}
+		ctx->tx_max = val;
+		netif_tx_unlock_bh(dev->net);
+	} else {
+		ctx->tx_max = val;
+	}
+
+	dev->hard_mtu = ctx->tx_max;
+
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
+
+	/* never pad more than 3 full USB packets per transfer */
+	ctx->min_tx_pkt = clamp_t(u16, ctx->tx_max - 3 * usb_maxpacket(dev->udev, dev->out),
+				  CDC_NCM_MIN_TX_PKT, ctx->tx_max);
+}
+
+/* helpers for NCM and MBIM differences */
+static u8 cdc_ncm_flags(struct usbnet *dev)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	if (cdc_ncm_comm_intf_is_mbim(dev->intf->cur_altsetting) && ctx->mbim_desc)
+		return ctx->mbim_desc->bmNetworkCapabilities;
+	if (ctx->func_desc)
+		return ctx->func_desc->bmNetworkCapabilities;
+	return 0;
+}
+
+static int cdc_ncm_eth_hlen(struct usbnet *dev)
+{
+	if (cdc_ncm_comm_intf_is_mbim(dev->intf->cur_altsetting))
+		return 0;
+	return ETH_HLEN;
+}
+
+static u32 cdc_ncm_min_dgram_size(struct usbnet *dev)
+{
+	if (cdc_ncm_comm_intf_is_mbim(dev->intf->cur_altsetting))
+		return CDC_MBIM_MIN_DATAGRAM_SIZE;
+	return CDC_NCM_MIN_DATAGRAM_SIZE;
+}
+
+static u32 cdc_ncm_max_dgram_size(struct usbnet *dev)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	if (cdc_ncm_comm_intf_is_mbim(dev->intf->cur_altsetting) && ctx->mbim_desc)
+		return le16_to_cpu(ctx->mbim_desc->wMaxSegmentSize);
+	if (ctx->ether_desc)
+		return le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
+	return CDC_NCM_MAX_DATAGRAM_SIZE;
+}
+
+/* initial one-time device setup.  MUST be called with the data interface
+ * in altsetting 0
+ */
+static int cdc_ncm_init(struct usbnet *dev)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	u8 iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber;
+	int err;
+
+	err = usbnet_read_cmd(dev, USB_CDC_GET_NTB_PARAMETERS,
+			      USB_TYPE_CLASS | USB_DIR_IN
+			      |USB_RECIP_INTERFACE,
+			      0, iface_no, &ctx->ncm_parm,
+			      sizeof(ctx->ncm_parm));
+	if (err < 0) {
+		dev_err(&dev->intf->dev, "failed GET_NTB_PARAMETERS\n");
+		return err; /* GET_NTB_PARAMETERS is required */
+	}
+
+	/* set CRC Mode */
+	if (cdc_ncm_flags(dev) & USB_CDC_NCM_NCAP_CRC_MODE) {
+		dev_dbg(&dev->intf->dev, "Setting CRC mode off\n");
+		err = usbnet_write_cmd(dev, USB_CDC_SET_CRC_MODE,
+				       USB_TYPE_CLASS | USB_DIR_OUT
+				       | USB_RECIP_INTERFACE,
+				       USB_CDC_NCM_CRC_NOT_APPENDED,
+				       iface_no, NULL, 0);
+		if (err < 0)
+			dev_err(&dev->intf->dev, "SET_CRC_MODE failed\n");
+	}
+
+	/* use ndp16 by default */
+	ctx->is_ndp16 = 1;
+
+	/* set NTB format, if both formats are supported.
+	 *
+	 * "The host shall only send this command while the NCM Data
+	 *  Interface is in alternate setting 0."
+	 */
+	if (le16_to_cpu(ctx->ncm_parm.bmNtbFormatsSupported) &
+						USB_CDC_NCM_NTB32_SUPPORTED) {
+		if (ctx->drvflags & CDC_NCM_FLAG_PREFER_NTB32) {
+			ctx->is_ndp16 = 0;
+			dev_dbg(&dev->intf->dev, "Setting NTB format to 32-bit\n");
+			err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_FORMAT,
+					       USB_TYPE_CLASS | USB_DIR_OUT
+					       | USB_RECIP_INTERFACE,
+					       USB_CDC_NCM_NTB32_FORMAT,
+					       iface_no, NULL, 0);
+		} else {
+			ctx->is_ndp16 = 1;
+			dev_dbg(&dev->intf->dev, "Setting NTB format to 16-bit\n");
+			err = usbnet_write_cmd(dev, USB_CDC_SET_NTB_FORMAT,
+					       USB_TYPE_CLASS | USB_DIR_OUT
+					       | USB_RECIP_INTERFACE,
+					       USB_CDC_NCM_NTB16_FORMAT,
+					       iface_no, NULL, 0);
+		}
+		if (err < 0) {
+			ctx->is_ndp16 = 1;
+			dev_err(&dev->intf->dev, "SET_NTB_FORMAT failed\n");
+		}
+	}
+
+	/* set initial device values */
+	ctx->rx_max = le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize);
+	ctx->tx_max = le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize);
+	ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder);
+	ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor);
+	ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment);
+	/* devices prior to NCM Errata shall set this field to zero */
+	ctx->tx_max_datagrams = le16_to_cpu(ctx->ncm_parm.wNtbOutMaxDatagrams);
+
+	dev_dbg(&dev->intf->dev,
+		"dwNtbInMaxSize=%u dwNtbOutMaxSize=%u wNdpOutPayloadRemainder=%u wNdpOutDivisor=%u wNdpOutAlignment=%u wNtbOutMaxDatagrams=%u flags=0x%x\n",
+		ctx->rx_max, ctx->tx_max, ctx->tx_remainder, ctx->tx_modulus,
+		ctx->tx_ndp_modulus, ctx->tx_max_datagrams, cdc_ncm_flags(dev));
+
+	/* max count of tx datagrams */
+	if ((ctx->tx_max_datagrams == 0) ||
+			(ctx->tx_max_datagrams > CDC_NCM_DPT_DATAGRAMS_MAX))
+		ctx->tx_max_datagrams = CDC_NCM_DPT_DATAGRAMS_MAX;
+
+	/* set up maximum NDP size */
+	if (ctx->is_ndp16)
+		ctx->max_ndp_size = sizeof(struct usb_cdc_ncm_ndp16) + (ctx->tx_max_datagrams + 1) * sizeof(struct usb_cdc_ncm_dpe16);
+	else
+		ctx->max_ndp_size = sizeof(struct usb_cdc_ncm_ndp32) + (ctx->tx_max_datagrams + 1) * sizeof(struct usb_cdc_ncm_dpe32);
+
+	/* initial coalescing timer interval */
+	ctx->timer_interval = CDC_NCM_TIMER_INTERVAL_USEC * NSEC_PER_USEC;
+
+	return 0;
+}
+
+/* set a new max datagram size */
+static void cdc_ncm_set_dgram_size(struct usbnet *dev, int new_size)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	u8 iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber;
+	__le16 max_datagram_size;
+	u16 mbim_mtu;
+	int err;
+
+	/* set default based on descriptors */
+	ctx->max_datagram_size = clamp_t(u32, new_size,
+					 cdc_ncm_min_dgram_size(dev),
+					 CDC_NCM_MAX_DATAGRAM_SIZE);
+
+	/* inform the device about the selected Max Datagram Size? */
+	if (!(cdc_ncm_flags(dev) & USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE))
+		goto out;
+
+	/* read current mtu value from device */
+	err = usbnet_read_cmd(dev, USB_CDC_GET_MAX_DATAGRAM_SIZE,
+			      USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
+			      0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
+	if (err != sizeof(max_datagram_size)) {
+		dev_dbg(&dev->intf->dev, "GET_MAX_DATAGRAM_SIZE failed\n");
+		goto out;
+	}
+
+	if (le16_to_cpu(max_datagram_size) == ctx->max_datagram_size)
+		goto out;
+
+	max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
+	err = usbnet_write_cmd(dev, USB_CDC_SET_MAX_DATAGRAM_SIZE,
+			       USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE,
+			       0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
+	if (err < 0)
+		dev_dbg(&dev->intf->dev, "SET_MAX_DATAGRAM_SIZE failed\n");
+
+out:
+	/* set MTU to max supported by the device if necessary */
+	dev->net->mtu = min_t(int, dev->net->mtu, ctx->max_datagram_size - cdc_ncm_eth_hlen(dev));
+
+	/* do not exceed operator preferred MTU */
+	if (ctx->mbim_extended_desc) {
+		mbim_mtu = le16_to_cpu(ctx->mbim_extended_desc->wMTU);
+		if (mbim_mtu != 0 && mbim_mtu < dev->net->mtu)
+			dev->net->mtu = mbim_mtu;
+	}
+}
+
+static void cdc_ncm_fix_modulus(struct usbnet *dev)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	u32 val;
+
+	/*
+	 * verify that the structure alignment is:
+	 * - power of two
+	 * - not greater than the maximum transmit length
+	 * - not less than four bytes
+	 */
+	val = ctx->tx_ndp_modulus;
+
+	if ((val < USB_CDC_NCM_NDP_ALIGN_MIN_SIZE) ||
+	    (val != ((-val) & val)) || (val >= ctx->tx_max)) {
+		dev_dbg(&dev->intf->dev, "Using default alignment: 4 bytes\n");
+		ctx->tx_ndp_modulus = USB_CDC_NCM_NDP_ALIGN_MIN_SIZE;
+	}
+
+	/*
+	 * verify that the payload alignment is:
+	 * - power of two
+	 * - not greater than the maximum transmit length
+	 * - not less than four bytes
+	 */
+	val = ctx->tx_modulus;
+
+	if ((val < USB_CDC_NCM_NDP_ALIGN_MIN_SIZE) ||
+	    (val != ((-val) & val)) || (val >= ctx->tx_max)) {
+		dev_dbg(&dev->intf->dev, "Using default transmit modulus: 4 bytes\n");
+		ctx->tx_modulus = USB_CDC_NCM_NDP_ALIGN_MIN_SIZE;
+	}
+
+	/* verify the payload remainder */
+	if (ctx->tx_remainder >= ctx->tx_modulus) {
+		dev_dbg(&dev->intf->dev, "Using default transmit remainder: 0 bytes\n");
+		ctx->tx_remainder = 0;
+	}
+
+	/* adjust TX-remainder according to NCM specification. */
+	ctx->tx_remainder = ((ctx->tx_remainder - cdc_ncm_eth_hlen(dev)) &
+			     (ctx->tx_modulus - 1));
+}
+
+static int cdc_ncm_setup(struct usbnet *dev)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	u32 def_rx, def_tx;
+
+	/* be conservative when selecting initial buffer size to
+	 * increase the number of hosts this will work for
+	 */
+	def_rx = min_t(u32, CDC_NCM_NTB_DEF_SIZE_RX,
+		       le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize));
+	def_tx = min_t(u32, CDC_NCM_NTB_DEF_SIZE_TX,
+		       le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize));
+
+	/* clamp rx_max and tx_max and inform device */
+	cdc_ncm_update_rxtx_max(dev, def_rx, def_tx);
+
+	/* sanitize the modulus and remainder values */
+	cdc_ncm_fix_modulus(dev);
+
+	/* set max datagram size */
+	cdc_ncm_set_dgram_size(dev, cdc_ncm_max_dgram_size(dev));
+	return 0;
+}
+
+static void
+cdc_ncm_find_endpoints(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct usb_host_endpoint *e, *in = NULL, *out = NULL;
+	u8 ep;
+
+	for (ep = 0; ep < intf->cur_altsetting->desc.bNumEndpoints; ep++) {
+		e = intf->cur_altsetting->endpoint + ep;
+
+		/* ignore endpoints which cannot transfer data */
+		if (!usb_endpoint_maxp(&e->desc))
+			continue;
+
+		switch (e->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+		case USB_ENDPOINT_XFER_INT:
+			if (usb_endpoint_dir_in(&e->desc)) {
+				if (!dev->status)
+					dev->status = e;
+			}
+			break;
+
+		case USB_ENDPOINT_XFER_BULK:
+			if (usb_endpoint_dir_in(&e->desc)) {
+				if (!in)
+					in = e;
+			} else {
+				if (!out)
+					out = e;
+			}
+			break;
+
+		default:
+			break;
+		}
+	}
+	if (in && !dev->in)
+		dev->in = usb_rcvbulkpipe(dev->udev,
+					  in->desc.bEndpointAddress &
+					  USB_ENDPOINT_NUMBER_MASK);
+	if (out && !dev->out)
+		dev->out = usb_sndbulkpipe(dev->udev,
+					   out->desc.bEndpointAddress &
+					   USB_ENDPOINT_NUMBER_MASK);
+}
+
+static void cdc_ncm_free(struct cdc_ncm_ctx *ctx)
+{
+	if (ctx == NULL)
+		return;
+
+	if (ctx->tx_rem_skb != NULL) {
+		dev_kfree_skb_any(ctx->tx_rem_skb);
+		ctx->tx_rem_skb = NULL;
+	}
+
+	if (ctx->tx_curr_skb != NULL) {
+		dev_kfree_skb_any(ctx->tx_curr_skb);
+		ctx->tx_curr_skb = NULL;
+	}
+
+	if (ctx->is_ndp16)
+		kfree(ctx->delayed_ndp16);
+	else
+		kfree(ctx->delayed_ndp32);
+
+	kfree(ctx);
+}
+
+/* we need to override the usbnet change_mtu ndo for two reasons:
+ *  - respect the negotiated maximum datagram size
+ *  - avoid unwanted changes to rx and tx buffers
+ */
+int cdc_ncm_change_mtu(struct net_device *net, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	net->mtu = new_mtu;
+	cdc_ncm_set_dgram_size(dev, new_mtu + cdc_ncm_eth_hlen(dev));
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_change_mtu);
+
+static const struct net_device_ops cdc_ncm_netdev_ops = {
+	.ndo_open	     = usbnet_open,
+	.ndo_stop	     = usbnet_stop,
+	.ndo_start_xmit	     = usbnet_start_xmit,
+	.ndo_tx_timeout	     = usbnet_tx_timeout,
+	.ndo_set_rx_mode     = usbnet_set_rx_mode,
+	.ndo_get_stats64     = dev_get_tstats64,
+	.ndo_change_mtu	     = cdc_ncm_change_mtu,
+	.ndo_set_mac_address = eth_mac_addr,
+	.ndo_validate_addr   = eth_validate_addr,
+};
+
+int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting, int drvflags)
+{
+	struct cdc_ncm_ctx *ctx;
+	struct usb_driver *driver;
+	u8 *buf;
+	int len;
+	int temp;
+	u8 iface_no;
+	struct usb_cdc_parsed_header hdr;
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->dev = dev;
+
+	hrtimer_init(&ctx->tx_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	ctx->tx_timer.function = &cdc_ncm_tx_timer_cb;
+	tasklet_setup(&ctx->bh, cdc_ncm_txpath_bh);
+	atomic_set(&ctx->stop, 0);
+	spin_lock_init(&ctx->mtx);
+
+	/* store ctx pointer in device data field */
+	dev->data[0] = (unsigned long)ctx;
+
+	/* only the control interface can be successfully probed */
+	ctx->control = intf;
+
+	/* get some pointers */
+	driver = driver_of(intf);
+	buf = intf->cur_altsetting->extra;
+	len = intf->cur_altsetting->extralen;
+
+	/* parse through descriptors associated with control interface */
+	cdc_parse_cdc_header(&hdr, intf, buf, len);
+
+	if (hdr.usb_cdc_union_desc)
+		ctx->data = usb_ifnum_to_if(dev->udev,
+					    hdr.usb_cdc_union_desc->bSlaveInterface0);
+	ctx->ether_desc = hdr.usb_cdc_ether_desc;
+	ctx->func_desc = hdr.usb_cdc_ncm_desc;
+	ctx->mbim_desc = hdr.usb_cdc_mbim_desc;
+	ctx->mbim_extended_desc = hdr.usb_cdc_mbim_extended_desc;
+
+	/* some buggy devices have an IAD but no CDC Union */
+	if (!hdr.usb_cdc_union_desc && intf->intf_assoc && intf->intf_assoc->bInterfaceCount == 2) {
+		ctx->data = usb_ifnum_to_if(dev->udev, intf->cur_altsetting->desc.bInterfaceNumber + 1);
+		dev_dbg(&intf->dev, "CDC Union missing - got slave from IAD\n");
+	}
+
+	/* check if we got everything */
+	if (!ctx->data) {
+		dev_err(&intf->dev, "CDC Union missing and no IAD found\n");
+		goto error;
+	}
+	if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting)) {
+		if (!ctx->mbim_desc) {
+			dev_err(&intf->dev, "MBIM functional descriptor missing\n");
+			goto error;
+		}
+	} else {
+		if (!ctx->ether_desc || !ctx->func_desc) {
+			dev_err(&intf->dev, "NCM or ECM functional descriptors missing\n");
+			goto error;
+		}
+	}
+
+	/* claim data interface, if different from control */
+	if (ctx->data != ctx->control) {
+		temp = usb_driver_claim_interface(driver, ctx->data, dev);
+		if (temp) {
+			dev_err(&intf->dev, "failed to claim data intf\n");
+			goto error;
+		}
+	}
+
+	iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber;
+
+	/* Device-specific flags */
+	ctx->drvflags = drvflags;
+
+	/* Reset data interface. Some devices will not reset properly
+	 * unless they are configured first.  Toggle the altsetting to
+	 * force a reset.
+	 * Some other devices do not work properly with this procedure
+	 * that can be avoided using quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE
+	 */
+	if (!(ctx->drvflags & CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE))
+		usb_set_interface(dev->udev, iface_no, data_altsetting);
+
+	temp = usb_set_interface(dev->udev, iface_no, 0);
+	if (temp) {
+		dev_dbg(&intf->dev, "set interface failed\n");
+		goto error2;
+	}
+
+	/* initialize basic device settings */
+	if (cdc_ncm_init(dev))
+		goto error2;
+
+	/* Some firmwares need a pause here or they will silently fail
+	 * to set up the interface properly.  This value was decided
+	 * empirically on a Sierra Wireless MC7455 running 02.08.02.00
+	 * firmware.
+	 */
+	usleep_range(10000, 20000);
+
+	/* configure data interface */
+	temp = usb_set_interface(dev->udev, iface_no, data_altsetting);
+	if (temp) {
+		dev_dbg(&intf->dev, "set interface failed\n");
+		goto error2;
+	}
+
+	cdc_ncm_find_endpoints(dev, ctx->data);
+	cdc_ncm_find_endpoints(dev, ctx->control);
+	if (!dev->in || !dev->out || !dev->status) {
+		dev_dbg(&intf->dev, "failed to collect endpoints\n");
+		goto error2;
+	}
+
+	usb_set_intfdata(ctx->control, dev);
+
+	if (ctx->ether_desc) {
+		temp = usbnet_get_ethernet_addr(dev, ctx->ether_desc->iMACAddress);
+		if (temp) {
+			dev_err(&intf->dev, "failed to get mac address\n");
+			goto error2;
+		}
+		dev_info(&intf->dev, "MAC-Address: %pM\n", dev->net->dev_addr);
+	}
+
+	/* finish setting up the device specific data */
+	cdc_ncm_setup(dev);
+
+	/* Allocate the delayed NDP if needed. */
+	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
+		if (ctx->is_ndp16) {
+			ctx->delayed_ndp16 = kzalloc(ctx->max_ndp_size, GFP_KERNEL);
+			if (!ctx->delayed_ndp16)
+				goto error2;
+		} else {
+			ctx->delayed_ndp32 = kzalloc(ctx->max_ndp_size, GFP_KERNEL);
+			if (!ctx->delayed_ndp32)
+				goto error2;
+		}
+		dev_info(&intf->dev, "NDP will be placed at end of frame for this device.");
+	}
+
+	/* override ethtool_ops */
+	dev->net->ethtool_ops = &cdc_ncm_ethtool_ops;
+
+	/* add our sysfs attrs */
+	dev->net->sysfs_groups[0] = &cdc_ncm_sysfs_attr_group;
+
+	/* must handle MTU changes */
+	dev->net->netdev_ops = &cdc_ncm_netdev_ops;
+	dev->net->max_mtu = cdc_ncm_max_dgram_size(dev) - cdc_ncm_eth_hlen(dev);
+
+	return 0;
+
+error2:
+	usb_set_intfdata(ctx->control, NULL);
+	usb_set_intfdata(ctx->data, NULL);
+	if (ctx->data != ctx->control)
+		usb_driver_release_interface(driver, ctx->data);
+error:
+	cdc_ncm_free((struct cdc_ncm_ctx *)dev->data[0]);
+	dev->data[0] = 0;
+	dev_info(&intf->dev, "bind() failure\n");
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_bind_common);
+
+void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	struct usb_driver *driver = driver_of(intf);
+
+	if (ctx == NULL)
+		return;		/* no setup */
+
+	atomic_set(&ctx->stop, 1);
+
+	hrtimer_cancel(&ctx->tx_timer);
+
+	tasklet_kill(&ctx->bh);
+
+	/* handle devices with combined control and data interface */
+	if (ctx->control == ctx->data)
+		ctx->data = NULL;
+
+	/* disconnect master --> disconnect slave */
+	if (intf == ctx->control && ctx->data) {
+		usb_set_intfdata(ctx->data, NULL);
+		usb_driver_release_interface(driver, ctx->data);
+		ctx->data = NULL;
+
+	} else if (intf == ctx->data && ctx->control) {
+		usb_set_intfdata(ctx->control, NULL);
+		usb_driver_release_interface(driver, ctx->control);
+		ctx->control = NULL;
+	}
+
+	usb_set_intfdata(intf, NULL);
+	cdc_ncm_free(ctx);
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_unbind);
+
+/* Return the number of the MBIM control interface altsetting iff it
+ * is preferred and available,
+ */
+u8 cdc_ncm_select_altsetting(struct usb_interface *intf)
+{
+	struct usb_host_interface *alt;
+
+	/* The MBIM spec defines a NCM compatible default altsetting,
+	 * which we may have matched:
+	 *
+	 *  "Functions that implement both NCM 1.0 and MBIM (an
+	 *   “NCM/MBIM function”) according to this recommendation
+	 *   shall provide two alternate settings for the
+	 *   Communication Interface.  Alternate setting 0, and the
+	 *   associated class and endpoint descriptors, shall be
+	 *   constructed according to the rules given for the
+	 *   Communication Interface in section 5 of [USBNCM10].
+	 *   Alternate setting 1, and the associated class and
+	 *   endpoint descriptors, shall be constructed according to
+	 *   the rules given in section 6 (USB Device Model) of this
+	 *   specification."
+	 */
+	if (intf->num_altsetting < 2)
+		return intf->cur_altsetting->desc.bAlternateSetting;
+
+	if (prefer_mbim) {
+		alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+		if (alt && cdc_ncm_comm_intf_is_mbim(alt))
+			return CDC_NCM_COMM_ALTSETTING_MBIM;
+	}
+	return CDC_NCM_COMM_ALTSETTING_NCM;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting);
+
+static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	/* MBIM backwards compatible function? */
+	if (cdc_ncm_select_altsetting(intf) != CDC_NCM_COMM_ALTSETTING_NCM)
+		return -ENODEV;
+
+	/* The NCM data altsetting is fixed, so we hard-coded it.
+	 * Additionally, generic NCM devices are assumed to accept arbitrarily
+	 * placed NDP.
+	 */
+	return cdc_ncm_bind_common(dev, intf, CDC_NCM_DATA_ALTSETTING_NCM, 0);
+}
+
+static void cdc_ncm_align_tail(struct sk_buff *skb, size_t modulus, size_t remainder, size_t max)
+{
+	size_t align = ALIGN(skb->len, modulus) - skb->len + remainder;
+
+	if (skb->len + align > max)
+		align = max - skb->len;
+	if (align && skb_tailroom(skb) >= align)
+		skb_put_zero(skb, align);
+}
+
+/* return a pointer to a valid struct usb_cdc_ncm_ndp16 of type sign, possibly
+ * allocating a new one within skb
+ */
+static struct usb_cdc_ncm_ndp16 *cdc_ncm_ndp16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign, size_t reserve)
+{
+	struct usb_cdc_ncm_ndp16 *ndp16 = NULL;
+	struct usb_cdc_ncm_nth16 *nth16 = (void *)skb->data;
+	size_t ndpoffset = le16_to_cpu(nth16->wNdpIndex);
+
+	/* If NDP should be moved to the end of the NCM package, we can't follow the
+	* NTH16 header as we would normally do. NDP isn't written to the SKB yet, and
+	* the wNdpIndex field in the header is actually not consistent with reality. It will be later.
+	*/
+	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
+		if (ctx->delayed_ndp16->dwSignature == sign)
+			return ctx->delayed_ndp16;
+
+		/* We can only push a single NDP to the end. Return
+		 * NULL to send what we've already got and queue this
+		 * skb for later.
+		 */
+		else if (ctx->delayed_ndp16->dwSignature)
+			return NULL;
+	}
+
+	/* follow the chain of NDPs, looking for a match */
+	while (ndpoffset) {
+		ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb->data + ndpoffset);
+		if  (ndp16->dwSignature == sign)
+			return ndp16;
+		ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex);
+	}
+
+	/* align new NDP */
+	if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
+		cdc_ncm_align_tail(skb, ctx->tx_ndp_modulus, 0, ctx->tx_curr_size);
+
+	/* verify that there is room for the NDP and the datagram (reserve) */
+	if ((ctx->tx_curr_size - skb->len - reserve) < ctx->max_ndp_size)
+		return NULL;
+
+	/* link to it */
+	if (ndp16)
+		ndp16->wNextNdpIndex = cpu_to_le16(skb->len);
+	else
+		nth16->wNdpIndex = cpu_to_le16(skb->len);
+
+	/* push a new empty NDP */
+	if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
+		ndp16 = skb_put_zero(skb, ctx->max_ndp_size);
+	else
+		ndp16 = ctx->delayed_ndp16;
+
+	ndp16->dwSignature = sign;
+	ndp16->wLength = cpu_to_le16(sizeof(struct usb_cdc_ncm_ndp16) + sizeof(struct usb_cdc_ncm_dpe16));
+	return ndp16;
+}
+
+static struct usb_cdc_ncm_ndp32 *cdc_ncm_ndp32(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign, size_t reserve)
+{
+	struct usb_cdc_ncm_ndp32 *ndp32 = NULL;
+	struct usb_cdc_ncm_nth32 *nth32 = (void *)skb->data;
+	size_t ndpoffset = le32_to_cpu(nth32->dwNdpIndex);
+
+	/* If NDP should be moved to the end of the NCM package, we can't follow the
+	 * NTH32 header as we would normally do. NDP isn't written to the SKB yet, and
+	 * the wNdpIndex field in the header is actually not consistent with reality. It will be later.
+	 */
+	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
+		if (ctx->delayed_ndp32->dwSignature == sign)
+			return ctx->delayed_ndp32;
+
+		/* We can only push a single NDP to the end. Return
+		 * NULL to send what we've already got and queue this
+		 * skb for later.
+		 */
+		else if (ctx->delayed_ndp32->dwSignature)
+			return NULL;
+	}
+
+	/* follow the chain of NDPs, looking for a match */
+	while (ndpoffset) {
+		ndp32 = (struct usb_cdc_ncm_ndp32 *)(skb->data + ndpoffset);
+		if  (ndp32->dwSignature == sign)
+			return ndp32;
+		ndpoffset = le32_to_cpu(ndp32->dwNextNdpIndex);
+	}
+
+	/* align new NDP */
+	if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
+		cdc_ncm_align_tail(skb, ctx->tx_ndp_modulus, 0, ctx->tx_curr_size);
+
+	/* verify that there is room for the NDP and the datagram (reserve) */
+	if ((ctx->tx_curr_size - skb->len - reserve) < ctx->max_ndp_size)
+		return NULL;
+
+	/* link to it */
+	if (ndp32)
+		ndp32->dwNextNdpIndex = cpu_to_le32(skb->len);
+	else
+		nth32->dwNdpIndex = cpu_to_le32(skb->len);
+
+	/* push a new empty NDP */
+	if (!(ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END))
+		ndp32 = skb_put_zero(skb, ctx->max_ndp_size);
+	else
+		ndp32 = ctx->delayed_ndp32;
+
+	ndp32->dwSignature = sign;
+	ndp32->wLength = cpu_to_le16(sizeof(struct usb_cdc_ncm_ndp32) + sizeof(struct usb_cdc_ncm_dpe32));
+	return ndp32;
+}
+
+struct sk_buff *
+cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	union {
+		struct usb_cdc_ncm_nth16 *nth16;
+		struct usb_cdc_ncm_nth32 *nth32;
+	} nth;
+	union {
+		struct usb_cdc_ncm_ndp16 *ndp16;
+		struct usb_cdc_ncm_ndp32 *ndp32;
+	} ndp;
+	struct sk_buff *skb_out;
+	u16 n = 0, index, ndplen;
+	u8 ready2send = 0;
+	u32 delayed_ndp_size;
+	size_t padding_count;
+
+	/* When our NDP gets written in cdc_ncm_ndp(), then skb_out->len gets updated
+	 * accordingly. Otherwise, we should check here.
+	 */
+	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END)
+		delayed_ndp_size = ctx->max_ndp_size +
+			max_t(u32,
+			      ctx->tx_ndp_modulus,
+			      ctx->tx_modulus + ctx->tx_remainder) - 1;
+	else
+		delayed_ndp_size = 0;
+
+	/* if there is a remaining skb, it gets priority */
+	if (skb != NULL) {
+		swap(skb, ctx->tx_rem_skb);
+		swap(sign, ctx->tx_rem_sign);
+	} else {
+		ready2send = 1;
+	}
+
+	/* check if we are resuming an OUT skb */
+	skb_out = ctx->tx_curr_skb;
+
+	/* allocate a new OUT skb */
+	if (!skb_out) {
+		if (ctx->tx_low_mem_val == 0) {
+			ctx->tx_curr_size = ctx->tx_max;
+			skb_out = alloc_skb(ctx->tx_curr_size, GFP_ATOMIC);
+			/* If the memory allocation fails we will wait longer
+			 * each time before attempting another full size
+			 * allocation again to not overload the system
+			 * further.
+			 */
+			if (skb_out == NULL) {
+				/* If even the smallest allocation fails, abort. */
+				if (ctx->tx_curr_size == USB_CDC_NCM_NTB_MIN_OUT_SIZE)
+					goto alloc_failed;
+				ctx->tx_low_mem_max_cnt = min(ctx->tx_low_mem_max_cnt + 1,
+							      (unsigned)CDC_NCM_LOW_MEM_MAX_CNT);
+				ctx->tx_low_mem_val = ctx->tx_low_mem_max_cnt;
+			}
+		}
+		if (skb_out == NULL) {
+			/* See if a very small allocation is possible.
+			 * We will send this packet immediately and hope
+			 * that there is more memory available later.
+			 */
+			if (skb)
+				ctx->tx_curr_size = max(skb->len,
+					(u32)USB_CDC_NCM_NTB_MIN_OUT_SIZE);
+			else
+				ctx->tx_curr_size = USB_CDC_NCM_NTB_MIN_OUT_SIZE;
+			skb_out = alloc_skb(ctx->tx_curr_size, GFP_ATOMIC);
+
+			/* No allocation possible so we will abort */
+			if (!skb_out)
+				goto alloc_failed;
+			ctx->tx_low_mem_val--;
+		}
+		if (ctx->is_ndp16) {
+			/* fill out the initial 16-bit NTB header */
+			nth.nth16 = skb_put_zero(skb_out, sizeof(struct usb_cdc_ncm_nth16));
+			nth.nth16->dwSignature = cpu_to_le32(USB_CDC_NCM_NTH16_SIGN);
+			nth.nth16->wHeaderLength = cpu_to_le16(sizeof(struct usb_cdc_ncm_nth16));
+			nth.nth16->wSequence = cpu_to_le16(ctx->tx_seq++);
+		} else {
+			/* fill out the initial 32-bit NTB header */
+			nth.nth32 = skb_put_zero(skb_out, sizeof(struct usb_cdc_ncm_nth32));
+			nth.nth32->dwSignature = cpu_to_le32(USB_CDC_NCM_NTH32_SIGN);
+			nth.nth32->wHeaderLength = cpu_to_le16(sizeof(struct usb_cdc_ncm_nth32));
+			nth.nth32->wSequence = cpu_to_le16(ctx->tx_seq++);
+		}
+
+		/* count total number of frames in this NTB */
+		ctx->tx_curr_frame_num = 0;
+
+		/* recent payload counter for this skb_out */
+		ctx->tx_curr_frame_payload = 0;
+	}
+
+	for (n = ctx->tx_curr_frame_num; n < ctx->tx_max_datagrams; n++) {
+		/* send any remaining skb first */
+		if (skb == NULL) {
+			skb = ctx->tx_rem_skb;
+			sign = ctx->tx_rem_sign;
+			ctx->tx_rem_skb = NULL;
+
+			/* check for end of skb */
+			if (skb == NULL)
+				break;
+		}
+
+		/* get the appropriate NDP for this skb */
+		if (ctx->is_ndp16)
+			ndp.ndp16 = cdc_ncm_ndp16(ctx, skb_out, sign, skb->len + ctx->tx_modulus + ctx->tx_remainder);
+		else
+			ndp.ndp32 = cdc_ncm_ndp32(ctx, skb_out, sign, skb->len + ctx->tx_modulus + ctx->tx_remainder);
+
+		/* align beginning of next frame */
+		cdc_ncm_align_tail(skb_out,  ctx->tx_modulus, ctx->tx_remainder, ctx->tx_curr_size);
+
+		/* check if we had enough room left for both NDP and frame */
+		if ((ctx->is_ndp16 && !ndp.ndp16) || (!ctx->is_ndp16 && !ndp.ndp32) ||
+		    skb_out->len + skb->len + delayed_ndp_size > ctx->tx_curr_size) {
+			if (n == 0) {
+				/* won't fit, MTU problem? */
+				dev_kfree_skb_any(skb);
+				skb = NULL;
+				dev->net->stats.tx_dropped++;
+			} else {
+				/* no room for skb - store for later */
+				if (ctx->tx_rem_skb != NULL) {
+					dev_kfree_skb_any(ctx->tx_rem_skb);
+					dev->net->stats.tx_dropped++;
+				}
+				ctx->tx_rem_skb = skb;
+				ctx->tx_rem_sign = sign;
+				skb = NULL;
+				ready2send = 1;
+				ctx->tx_reason_ntb_full++;	/* count reason for transmitting */
+			}
+			break;
+		}
+
+		/* calculate frame number within this NDP */
+		if (ctx->is_ndp16) {
+			ndplen = le16_to_cpu(ndp.ndp16->wLength);
+			index = (ndplen - sizeof(struct usb_cdc_ncm_ndp16)) / sizeof(struct usb_cdc_ncm_dpe16) - 1;
+
+			/* OK, add this skb */
+			ndp.ndp16->dpe16[index].wDatagramLength = cpu_to_le16(skb->len);
+			ndp.ndp16->dpe16[index].wDatagramIndex = cpu_to_le16(skb_out->len);
+			ndp.ndp16->wLength = cpu_to_le16(ndplen + sizeof(struct usb_cdc_ncm_dpe16));
+		} else {
+			ndplen = le16_to_cpu(ndp.ndp32->wLength);
+			index = (ndplen - sizeof(struct usb_cdc_ncm_ndp32)) / sizeof(struct usb_cdc_ncm_dpe32) - 1;
+
+			ndp.ndp32->dpe32[index].dwDatagramLength = cpu_to_le32(skb->len);
+			ndp.ndp32->dpe32[index].dwDatagramIndex = cpu_to_le32(skb_out->len);
+			ndp.ndp32->wLength = cpu_to_le16(ndplen + sizeof(struct usb_cdc_ncm_dpe32));
+		}
+		skb_put_data(skb_out, skb->data, skb->len);
+		ctx->tx_curr_frame_payload += skb->len;	/* count real tx payload data */
+		dev_kfree_skb_any(skb);
+		skb = NULL;
+
+		/* send now if this NDP is full */
+		if (index >= CDC_NCM_DPT_DATAGRAMS_MAX) {
+			ready2send = 1;
+			ctx->tx_reason_ndp_full++;	/* count reason for transmitting */
+			break;
+		}
+	}
+
+	/* free up any dangling skb */
+	if (skb != NULL) {
+		dev_kfree_skb_any(skb);
+		skb = NULL;
+		dev->net->stats.tx_dropped++;
+	}
+
+	ctx->tx_curr_frame_num = n;
+
+	if (n == 0) {
+		/* wait for more frames */
+		/* push variables */
+		ctx->tx_curr_skb = skb_out;
+		goto exit_no_skb;
+
+	} else if ((n < ctx->tx_max_datagrams) && (ready2send == 0) && (ctx->timer_interval > 0)) {
+		/* wait for more frames */
+		/* push variables */
+		ctx->tx_curr_skb = skb_out;
+		/* set the pending count */
+		if (n < CDC_NCM_RESTART_TIMER_DATAGRAM_CNT)
+			ctx->tx_timer_pending = CDC_NCM_TIMER_PENDING_CNT;
+		goto exit_no_skb;
+
+	} else {
+		if (n == ctx->tx_max_datagrams)
+			ctx->tx_reason_max_datagram++;	/* count reason for transmitting */
+		/* frame goes out */
+		/* variables will be reset at next call */
+	}
+
+	/* If requested, put NDP at end of frame. */
+	if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) {
+		if (ctx->is_ndp16) {
+			nth.nth16 = (struct usb_cdc_ncm_nth16 *)skb_out->data;
+			cdc_ncm_align_tail(skb_out, ctx->tx_ndp_modulus, 0, ctx->tx_curr_size - ctx->max_ndp_size);
+			nth.nth16->wNdpIndex = cpu_to_le16(skb_out->len);
+			skb_put_data(skb_out, ctx->delayed_ndp16, ctx->max_ndp_size);
+
+			/* Zero out delayed NDP - signature checking will naturally fail. */
+			ndp.ndp16 = memset(ctx->delayed_ndp16, 0, ctx->max_ndp_size);
+		} else {
+			nth.nth32 = (struct usb_cdc_ncm_nth32 *)skb_out->data;
+			cdc_ncm_align_tail(skb_out, ctx->tx_ndp_modulus, 0, ctx->tx_curr_size - ctx->max_ndp_size);
+			nth.nth32->dwNdpIndex = cpu_to_le32(skb_out->len);
+			skb_put_data(skb_out, ctx->delayed_ndp32, ctx->max_ndp_size);
+
+			ndp.ndp32 = memset(ctx->delayed_ndp32, 0, ctx->max_ndp_size);
+		}
+	}
+
+	/* If collected data size is less or equal ctx->min_tx_pkt
+	 * bytes, we send buffers as it is. If we get more data, it
+	 * would be more efficient for USB HS mobile device with DMA
+	 * engine to receive a full size NTB, than canceling DMA
+	 * transfer and receiving a short packet.
+	 *
+	 * This optimization support is pointless if we end up sending
+	 * a ZLP after full sized NTBs.
+	 */
+	if (!(dev->driver_info->flags & FLAG_SEND_ZLP) &&
+	    skb_out->len > ctx->min_tx_pkt) {
+		padding_count = ctx->tx_curr_size - skb_out->len;
+		if (!WARN_ON(padding_count > ctx->tx_curr_size))
+			skb_put_zero(skb_out, padding_count);
+	} else if (skb_out->len < ctx->tx_curr_size &&
+		   (skb_out->len % dev->maxpacket) == 0) {
+		skb_put_u8(skb_out, 0);	/* force short packet */
+	}
+
+	/* set final frame length */
+	if (ctx->is_ndp16) {
+		nth.nth16 = (struct usb_cdc_ncm_nth16 *)skb_out->data;
+		nth.nth16->wBlockLength = cpu_to_le16(skb_out->len);
+	} else {
+		nth.nth32 = (struct usb_cdc_ncm_nth32 *)skb_out->data;
+		nth.nth32->dwBlockLength = cpu_to_le32(skb_out->len);
+	}
+
+	/* return skb */
+	ctx->tx_curr_skb = NULL;
+
+	/* keep private stats: framing overhead and number of NTBs */
+	ctx->tx_overhead += skb_out->len - ctx->tx_curr_frame_payload;
+	ctx->tx_ntbs++;
+
+	/* usbnet will count all the framing overhead by default.
+	 * Adjust the stats so that the tx_bytes counter show real
+	 * payload data instead.
+	 */
+	usbnet_set_skb_tx_stats(skb_out, n,
+				(long)ctx->tx_curr_frame_payload - skb_out->len);
+
+	return skb_out;
+
+alloc_failed:
+	if (skb) {
+		dev_kfree_skb_any(skb);
+		dev->net->stats.tx_dropped++;
+	}
+exit_no_skb:
+	/* Start timer, if there is a remaining non-empty skb */
+	if (ctx->tx_curr_skb != NULL && n > 0)
+		cdc_ncm_tx_timeout_start(ctx);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_fill_tx_frame);
+
+static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx)
+{
+	/* start timer, if not already started */
+	if (!(hrtimer_active(&ctx->tx_timer) || atomic_read(&ctx->stop)))
+		hrtimer_start(&ctx->tx_timer,
+				ctx->timer_interval,
+				HRTIMER_MODE_REL);
+}
+
+static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *timer)
+{
+	struct cdc_ncm_ctx *ctx =
+			container_of(timer, struct cdc_ncm_ctx, tx_timer);
+
+	if (!atomic_read(&ctx->stop))
+		tasklet_schedule(&ctx->bh);
+	return HRTIMER_NORESTART;
+}
+
+static void cdc_ncm_txpath_bh(struct tasklet_struct *t)
+{
+	struct cdc_ncm_ctx *ctx = from_tasklet(ctx, t, bh);
+	struct usbnet *dev = ctx->dev;
+
+	spin_lock(&ctx->mtx);
+	if (ctx->tx_timer_pending != 0) {
+		ctx->tx_timer_pending--;
+		cdc_ncm_tx_timeout_start(ctx);
+		spin_unlock(&ctx->mtx);
+	} else if (dev->net != NULL) {
+		ctx->tx_reason_timeout++;	/* count reason for transmitting */
+		spin_unlock(&ctx->mtx);
+		netif_tx_lock_bh(dev->net);
+		usbnet_start_xmit(NULL, dev->net);
+		netif_tx_unlock_bh(dev->net);
+	} else {
+		spin_unlock(&ctx->mtx);
+	}
+}
+
+struct sk_buff *
+cdc_ncm_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *skb_out;
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	/*
+	 * The Ethernet API we are using does not support transmitting
+	 * multiple Ethernet frames in a single call. This driver will
+	 * accumulate multiple Ethernet frames and send out a larger
+	 * USB frame when the USB buffer is full or when a single jiffies
+	 * timeout happens.
+	 */
+	if (ctx == NULL)
+		goto error;
+
+	spin_lock_bh(&ctx->mtx);
+
+	if (ctx->is_ndp16)
+		skb_out = cdc_ncm_fill_tx_frame(dev, skb, cpu_to_le32(USB_CDC_NCM_NDP16_NOCRC_SIGN));
+	else
+		skb_out = cdc_ncm_fill_tx_frame(dev, skb, cpu_to_le32(USB_CDC_NCM_NDP32_NOCRC_SIGN));
+
+	spin_unlock_bh(&ctx->mtx);
+	return skb_out;
+
+error:
+	if (skb != NULL)
+		dev_kfree_skb_any(skb);
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_tx_fixup);
+
+/* verify NTB header and return offset of first NDP, or negative error */
+int cdc_ncm_rx_verify_nth16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in)
+{
+	struct usbnet *dev = netdev_priv(skb_in->dev);
+	struct usb_cdc_ncm_nth16 *nth16;
+	int len;
+	int ret = -EINVAL;
+
+	if (ctx == NULL)
+		goto error;
+
+	if (skb_in->len < (sizeof(struct usb_cdc_ncm_nth16) +
+					sizeof(struct usb_cdc_ncm_ndp16))) {
+		netif_dbg(dev, rx_err, dev->net, "frame too short\n");
+		goto error;
+	}
+
+	nth16 = (struct usb_cdc_ncm_nth16 *)skb_in->data;
+
+	if (nth16->dwSignature != cpu_to_le32(USB_CDC_NCM_NTH16_SIGN)) {
+		netif_dbg(dev, rx_err, dev->net,
+			  "invalid NTH16 signature <%#010x>\n",
+			  le32_to_cpu(nth16->dwSignature));
+		goto error;
+	}
+
+	len = le16_to_cpu(nth16->wBlockLength);
+	if (len > ctx->rx_max) {
+		netif_dbg(dev, rx_err, dev->net,
+			  "unsupported NTB block length %u/%u\n", len,
+			  ctx->rx_max);
+		goto error;
+	}
+
+	if ((ctx->rx_seq + 1) != le16_to_cpu(nth16->wSequence) &&
+	    (ctx->rx_seq || le16_to_cpu(nth16->wSequence)) &&
+	    !((ctx->rx_seq == 0xffff) && !le16_to_cpu(nth16->wSequence))) {
+		netif_dbg(dev, rx_err, dev->net,
+			  "sequence number glitch prev=%d curr=%d\n",
+			  ctx->rx_seq, le16_to_cpu(nth16->wSequence));
+	}
+	ctx->rx_seq = le16_to_cpu(nth16->wSequence);
+
+	ret = le16_to_cpu(nth16->wNdpIndex);
+error:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_rx_verify_nth16);
+
+int cdc_ncm_rx_verify_nth32(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in)
+{
+	struct usbnet *dev = netdev_priv(skb_in->dev);
+	struct usb_cdc_ncm_nth32 *nth32;
+	int len;
+	int ret = -EINVAL;
+
+	if (ctx == NULL)
+		goto error;
+
+	if (skb_in->len < (sizeof(struct usb_cdc_ncm_nth32) +
+					sizeof(struct usb_cdc_ncm_ndp32))) {
+		netif_dbg(dev, rx_err, dev->net, "frame too short\n");
+		goto error;
+	}
+
+	nth32 = (struct usb_cdc_ncm_nth32 *)skb_in->data;
+
+	if (nth32->dwSignature != cpu_to_le32(USB_CDC_NCM_NTH32_SIGN)) {
+		netif_dbg(dev, rx_err, dev->net,
+			  "invalid NTH32 signature <%#010x>\n",
+			  le32_to_cpu(nth32->dwSignature));
+		goto error;
+	}
+
+	len = le32_to_cpu(nth32->dwBlockLength);
+	if (len > ctx->rx_max) {
+		netif_dbg(dev, rx_err, dev->net,
+			  "unsupported NTB block length %u/%u\n", len,
+			  ctx->rx_max);
+		goto error;
+	}
+
+	if ((ctx->rx_seq + 1) != le16_to_cpu(nth32->wSequence) &&
+	    (ctx->rx_seq || le16_to_cpu(nth32->wSequence)) &&
+	    !((ctx->rx_seq == 0xffff) && !le16_to_cpu(nth32->wSequence))) {
+		netif_dbg(dev, rx_err, dev->net,
+			  "sequence number glitch prev=%d curr=%d\n",
+			  ctx->rx_seq, le16_to_cpu(nth32->wSequence));
+	}
+	ctx->rx_seq = le16_to_cpu(nth32->wSequence);
+
+	ret = le32_to_cpu(nth32->dwNdpIndex);
+error:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_rx_verify_nth32);
+
+/* verify NDP header and return number of datagrams, or negative error */
+int cdc_ncm_rx_verify_ndp16(struct sk_buff *skb_in, int ndpoffset)
+{
+	struct usbnet *dev = netdev_priv(skb_in->dev);
+	struct usb_cdc_ncm_ndp16 *ndp16;
+	int ret = -EINVAL;
+
+	if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len) {
+		netif_dbg(dev, rx_err, dev->net, "invalid NDP offset  <%u>\n",
+			  ndpoffset);
+		goto error;
+	}
+	ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset);
+
+	if (le16_to_cpu(ndp16->wLength) < USB_CDC_NCM_NDP16_LENGTH_MIN) {
+		netif_dbg(dev, rx_err, dev->net, "invalid DPT16 length <%u>\n",
+			  le16_to_cpu(ndp16->wLength));
+		goto error;
+	}
+
+	ret = ((le16_to_cpu(ndp16->wLength) -
+					sizeof(struct usb_cdc_ncm_ndp16)) /
+					sizeof(struct usb_cdc_ncm_dpe16));
+	ret--; /* we process NDP entries except for the last one */
+
+	if ((sizeof(struct usb_cdc_ncm_ndp16) +
+	     ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len) {
+		netif_dbg(dev, rx_err, dev->net, "Invalid nframes = %d\n", ret);
+		ret = -EINVAL;
+	}
+
+error:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_rx_verify_ndp16);
+
+/* verify NDP header and return number of datagrams, or negative error */
+int cdc_ncm_rx_verify_ndp32(struct sk_buff *skb_in, int ndpoffset)
+{
+	struct usbnet *dev = netdev_priv(skb_in->dev);
+	struct usb_cdc_ncm_ndp32 *ndp32;
+	int ret = -EINVAL;
+
+	if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp32)) > skb_in->len) {
+		netif_dbg(dev, rx_err, dev->net, "invalid NDP offset  <%u>\n",
+			  ndpoffset);
+		goto error;
+	}
+	ndp32 = (struct usb_cdc_ncm_ndp32 *)(skb_in->data + ndpoffset);
+
+	if (le16_to_cpu(ndp32->wLength) < USB_CDC_NCM_NDP32_LENGTH_MIN) {
+		netif_dbg(dev, rx_err, dev->net, "invalid DPT32 length <%u>\n",
+			  le16_to_cpu(ndp32->wLength));
+		goto error;
+	}
+
+	ret = ((le16_to_cpu(ndp32->wLength) -
+					sizeof(struct usb_cdc_ncm_ndp32)) /
+					sizeof(struct usb_cdc_ncm_dpe32));
+	ret--; /* we process NDP entries except for the last one */
+
+	if ((sizeof(struct usb_cdc_ncm_ndp32) +
+	     ret * (sizeof(struct usb_cdc_ncm_dpe32))) > skb_in->len) {
+		netif_dbg(dev, rx_err, dev->net, "Invalid nframes = %d\n", ret);
+		ret = -EINVAL;
+	}
+
+error:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_rx_verify_ndp32);
+
+int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in)
+{
+	struct sk_buff *skb;
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	unsigned int len;
+	int nframes;
+	int x;
+	unsigned int offset;
+	union {
+		struct usb_cdc_ncm_ndp16 *ndp16;
+		struct usb_cdc_ncm_ndp32 *ndp32;
+	} ndp;
+	union {
+		struct usb_cdc_ncm_dpe16 *dpe16;
+		struct usb_cdc_ncm_dpe32 *dpe32;
+	} dpe;
+
+	int ndpoffset;
+	int loopcount = 50; /* arbitrary max preventing infinite loop */
+	u32 payload = 0;
+
+	if (ctx->is_ndp16)
+		ndpoffset = cdc_ncm_rx_verify_nth16(ctx, skb_in);
+	else
+		ndpoffset = cdc_ncm_rx_verify_nth32(ctx, skb_in);
+
+	if (ndpoffset < 0)
+		goto error;
+
+next_ndp:
+	if (ctx->is_ndp16) {
+		nframes = cdc_ncm_rx_verify_ndp16(skb_in, ndpoffset);
+		if (nframes < 0)
+			goto error;
+
+		ndp.ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset);
+
+		if (ndp.ndp16->dwSignature != cpu_to_le32(USB_CDC_NCM_NDP16_NOCRC_SIGN)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "invalid DPT16 signature <%#010x>\n",
+				  le32_to_cpu(ndp.ndp16->dwSignature));
+			goto err_ndp;
+		}
+		dpe.dpe16 = ndp.ndp16->dpe16;
+	} else {
+		nframes = cdc_ncm_rx_verify_ndp32(skb_in, ndpoffset);
+		if (nframes < 0)
+			goto error;
+
+		ndp.ndp32 = (struct usb_cdc_ncm_ndp32 *)(skb_in->data + ndpoffset);
+
+		if (ndp.ndp32->dwSignature != cpu_to_le32(USB_CDC_NCM_NDP32_NOCRC_SIGN)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "invalid DPT32 signature <%#010x>\n",
+				  le32_to_cpu(ndp.ndp32->dwSignature));
+			goto err_ndp;
+		}
+		dpe.dpe32 = ndp.ndp32->dpe32;
+	}
+
+	for (x = 0; x < nframes; x++) {
+		if (ctx->is_ndp16) {
+			offset = le16_to_cpu(dpe.dpe16->wDatagramIndex);
+			len = le16_to_cpu(dpe.dpe16->wDatagramLength);
+		} else {
+			offset = le32_to_cpu(dpe.dpe32->dwDatagramIndex);
+			len = le32_to_cpu(dpe.dpe32->dwDatagramLength);
+		}
+
+		/*
+		 * CDC NCM ch. 3.7
+		 * All entries after first NULL entry are to be ignored
+		 */
+		if ((offset == 0) || (len == 0)) {
+			if (!x)
+				goto err_ndp; /* empty NTB */
+			break;
+		}
+
+		/* sanity checking - watch out for integer wrap*/
+		if ((offset > skb_in->len) || (len > skb_in->len - offset) ||
+				(len > ctx->rx_max) || (len < ETH_HLEN)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n",
+				  x, offset, len, skb_in);
+			if (!x)
+				goto err_ndp;
+			break;
+
+		} else {
+			/* create a fresh copy to reduce truesize */
+			skb = netdev_alloc_skb_ip_align(dev->net,  len);
+			if (!skb)
+				goto error;
+			skb_put_data(skb, skb_in->data + offset, len);
+			usbnet_skb_return(dev, skb);
+			payload += len;	/* count payload bytes in this NTB */
+		}
+
+		if (ctx->is_ndp16)
+			dpe.dpe16++;
+		else
+			dpe.dpe32++;
+	}
+err_ndp:
+	/* are there more NDPs to process? */
+	if (ctx->is_ndp16)
+		ndpoffset = le16_to_cpu(ndp.ndp16->wNextNdpIndex);
+	else
+		ndpoffset = le32_to_cpu(ndp.ndp32->dwNextNdpIndex);
+
+	if (ndpoffset && loopcount--)
+		goto next_ndp;
+
+	/* update stats */
+	ctx->rx_overhead += skb_in->len - payload;
+	ctx->rx_ntbs++;
+
+	return 1;
+error:
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_rx_fixup);
+
+static void
+cdc_ncm_speed_change(struct usbnet *dev,
+		     struct usb_cdc_speed_change *data)
+{
+	/* RTL8156 shipped before 2021 sends notification about every 32ms. */
+	dev->rx_speed = le32_to_cpu(data->DLBitRRate);
+	dev->tx_speed = le32_to_cpu(data->ULBitRate);
+}
+
+static void cdc_ncm_status(struct usbnet *dev, struct urb *urb)
+{
+	struct usb_cdc_notification *event;
+
+	if (urb->actual_length < sizeof(*event))
+		return;
+
+	/* test for split data in 8-byte chunks */
+	if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
+		cdc_ncm_speed_change(dev,
+		      (struct usb_cdc_speed_change *)urb->transfer_buffer);
+		return;
+	}
+
+	event = urb->transfer_buffer;
+
+	switch (event->bNotificationType) {
+	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+		/*
+		 * According to the CDC NCM specification ch.7.1
+		 * USB_CDC_NOTIFY_NETWORK_CONNECTION notification shall be
+		 * sent by device after USB_CDC_NOTIFY_SPEED_CHANGE.
+		 */
+		/* RTL8156 shipped before 2021 sends notification about
+		 * every 32ms. Don't forward notification if state is same.
+		 */
+		if (netif_carrier_ok(dev->net) != !!event->wValue)
+			usbnet_link_change(dev, !!event->wValue, 0);
+		break;
+
+	case USB_CDC_NOTIFY_SPEED_CHANGE:
+		if (urb->actual_length < (sizeof(*event) +
+					sizeof(struct usb_cdc_speed_change)))
+			set_bit(EVENT_STS_SPLIT, &dev->flags);
+		else
+			cdc_ncm_speed_change(dev,
+					     (struct usb_cdc_speed_change *)&event[1]);
+		break;
+
+	default:
+		dev_dbg(&dev->udev->dev,
+			"NCM: unexpected notification 0x%02x!\n",
+			event->bNotificationType);
+		break;
+	}
+}
+
+static const struct driver_info cdc_ncm_info = {
+	.description = "CDC NCM (NO ZLP)",
+	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
+			| FLAG_LINK_INTR | FLAG_ETHER,
+	.bind = cdc_ncm_bind,
+	.unbind = cdc_ncm_unbind,
+	.manage_power = usbnet_manage_power,
+	.status = cdc_ncm_status,
+	.rx_fixup = cdc_ncm_rx_fixup,
+	.tx_fixup = cdc_ncm_tx_fixup,
+	.set_rx_mode = usbnet_cdc_update_filter,
+};
+
+/* Same as cdc_ncm_info, but with FLAG_SEND_ZLP  */
+static const struct driver_info cdc_ncm_zlp_info = {
+	.description = "CDC NCM (SEND ZLP)",
+	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
+			| FLAG_LINK_INTR | FLAG_ETHER | FLAG_SEND_ZLP,
+	.bind = cdc_ncm_bind,
+	.unbind = cdc_ncm_unbind,
+	.manage_power = usbnet_manage_power,
+	.status = cdc_ncm_status,
+	.rx_fixup = cdc_ncm_rx_fixup,
+	.tx_fixup = cdc_ncm_tx_fixup,
+	.set_rx_mode = usbnet_cdc_update_filter,
+};
+
+/* Same as cdc_ncm_info, but with FLAG_WWAN */
+static const struct driver_info wwan_info = {
+	.description = "Mobile Broadband Network Device",
+	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
+			| FLAG_LINK_INTR | FLAG_WWAN,
+	.bind = cdc_ncm_bind,
+	.unbind = cdc_ncm_unbind,
+	.manage_power = usbnet_manage_power,
+	.status = cdc_ncm_status,
+	.rx_fixup = cdc_ncm_rx_fixup,
+	.tx_fixup = cdc_ncm_tx_fixup,
+	.set_rx_mode = usbnet_cdc_update_filter,
+};
+
+/* Same as wwan_info, but with FLAG_NOARP  */
+static const struct driver_info wwan_noarp_info = {
+	.description = "Mobile Broadband Network Device (NO ARP)",
+	.flags = FLAG_POINTTOPOINT | FLAG_NO_SETINT | FLAG_MULTI_PACKET
+			| FLAG_LINK_INTR | FLAG_WWAN | FLAG_NOARP,
+	.bind = cdc_ncm_bind,
+	.unbind = cdc_ncm_unbind,
+	.manage_power = usbnet_manage_power,
+	.status = cdc_ncm_status,
+	.rx_fixup = cdc_ncm_rx_fixup,
+	.tx_fixup = cdc_ncm_tx_fixup,
+	.set_rx_mode = usbnet_cdc_update_filter,
+};
+
+static const struct usb_device_id cdc_devs[] = {
+	/* Ericsson MBM devices like F5521gw */
+	{ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+		| USB_DEVICE_ID_MATCH_VENDOR,
+	  .idVendor = 0x0bdb,
+	  .bInterfaceClass = USB_CLASS_COMM,
+	  .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM,
+	  .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+	  .driver_info = (unsigned long) &wwan_info,
+	},
+
+	/* Telit LE910 V2 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x0036,
+		USB_CLASS_COMM,
+		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&wwan_noarp_info,
+	},
+
+	/* DW5812 LTE Verizon Mobile Broadband Card
+	 * Unlike DW5550 this device requires FLAG_NOARP
+	 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x81bb,
+		USB_CLASS_COMM,
+		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&wwan_noarp_info,
+	},
+
+	/* DW5813 LTE AT&T Mobile Broadband Card
+	 * Unlike DW5550 this device requires FLAG_NOARP
+	 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x81bc,
+		USB_CLASS_COMM,
+		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&wwan_noarp_info,
+	},
+
+	/* Dell branded MBM devices like DW5550 */
+	{ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+		| USB_DEVICE_ID_MATCH_VENDOR,
+	  .idVendor = 0x413c,
+	  .bInterfaceClass = USB_CLASS_COMM,
+	  .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM,
+	  .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+	  .driver_info = (unsigned long) &wwan_info,
+	},
+
+	/* Toshiba branded MBM devices */
+	{ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+		| USB_DEVICE_ID_MATCH_VENDOR,
+	  .idVendor = 0x0930,
+	  .bInterfaceClass = USB_CLASS_COMM,
+	  .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM,
+	  .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+	  .driver_info = (unsigned long) &wwan_info,
+	},
+
+	/* tag Huawei devices as wwan */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1,
+					USB_CLASS_COMM,
+					USB_CDC_SUBCLASS_NCM,
+					USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&wwan_info,
+	},
+
+	/* Infineon(now Intel) HSPA Modem platform */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1519, 0x0443,
+		USB_CLASS_COMM,
+		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&wwan_noarp_info,
+	},
+
+	/* u-blox TOBY-L4 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1546, 0x1010,
+		USB_CLASS_COMM,
+		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&wwan_info,
+	},
+
+	/* DisplayLink docking stations */
+	{ .match_flags = USB_DEVICE_ID_MATCH_INT_INFO
+		| USB_DEVICE_ID_MATCH_VENDOR,
+	  .idVendor = 0x17e9,
+	  .bInterfaceClass = USB_CLASS_COMM,
+	  .bInterfaceSubClass = USB_CDC_SUBCLASS_NCM,
+	  .bInterfaceProtocol = USB_CDC_PROTO_NONE,
+	  .driver_info = (unsigned long)&cdc_ncm_zlp_info,
+	},
+
+	/* Generic CDC-NCM devices */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM,
+		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+		.driver_info = (unsigned long)&cdc_ncm_info,
+	},
+	{
+	},
+};
+MODULE_DEVICE_TABLE(usb, cdc_devs);
+
+static struct usb_driver cdc_ncm_driver = {
+	.name = "cdc_ncm",
+	.id_table = cdc_devs,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+	.reset_resume =	usbnet_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(cdc_ncm_driver);
+
+MODULE_AUTHOR("Hans Petter Selasky");
+MODULE_DESCRIPTION("USB CDC NCM host driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c
new file mode 100644
index 000000000..f4a44f05c
--- /dev/null
+++ b/drivers/net/usb/cdc_subset.c
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Simple "CDC Subset" USB Networking Links
+ * Copyright (C) 2000-2005 by David Brownell
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * This supports simple USB network links that don't require any special
+ * framing or hardware control operations.  The protocol used here is a
+ * strict subset of CDC Ethernet, with three basic differences reflecting
+ * the goal that almost any hardware should run it:
+ *
+ *  - Minimal runtime control:  one interface, no altsettings, and
+ *    no vendor or class specific control requests.  If a device is
+ *    configured, it is allowed to exchange packets with the host.
+ *    Fancier models would mean not working on some hardware.
+ *
+ *  - Minimal manufacturing control:  no IEEE "Organizationally
+ *    Unique ID" required, or an EEPROMs to store one.  Each host uses
+ *    one random "locally assigned" Ethernet address instead, which can
+ *    of course be overridden using standard tools like "ifconfig".
+ *    (With 2^46 such addresses, same-net collisions are quite rare.)
+ *
+ *  - There is no additional framing data for USB.  Packets are written
+ *    exactly as in CDC Ethernet, starting with an Ethernet header and
+ *    terminated by a short packet.  However, the host will never send a
+ *    zero length packet; some systems can't handle those robustly.
+ *
+ * Anything that can transmit and receive USB bulk packets can implement
+ * this protocol.  That includes both smart peripherals and quite a lot
+ * of "host-to-host" USB cables (which embed two devices back-to-back).
+ *
+ * Note that although Linux may use many of those host-to-host links
+ * with this "cdc_subset" framing, that doesn't mean there may not be a
+ * better approach.  Handling the "other end unplugs/replugs" scenario
+ * well tends to require chip-specific vendor requests.  Also, Windows
+ * peers at the other end of host-to-host cables may expect their own
+ * framing to be used rather than this "cdc_subset" model.
+ */
+
+#if defined(CONFIG_USB_EPSON2888) || defined(CONFIG_USB_ARMLINUX)
+/* PDA style devices are always connected if present */
+static int always_connected (struct usbnet *dev)
+{
+	return 0;
+}
+#endif
+
+#ifdef	CONFIG_USB_ALI_M5632
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * ALi M5632 driver ... does high speed
+ *
+ * NOTE that the MS-Windows drivers for this chip use some funky and
+ * (naturally) undocumented 7-byte prefix to each packet, so this is a
+ * case where we don't currently interoperate.  Also, once you unplug
+ * one end of the cable, you need to replug the other end too ... since
+ * chip docs are unavailable, there's no way to reset the relevant state
+ * short of a power cycle.
+ *
+ *-------------------------------------------------------------------------*/
+
+static void m5632_recover(struct usbnet *dev)
+{
+	struct usb_device	*udev = dev->udev;
+	struct usb_interface	*intf = dev->intf;
+	int r;
+
+	r = usb_lock_device_for_reset(udev, intf);
+	if (r < 0)
+		return;
+
+	usb_reset_device(udev);
+	usb_unlock_device(udev);
+}
+
+static const struct driver_info	ali_m5632_info = {
+	.description =	"ALi M5632",
+	.flags       = FLAG_POINTTOPOINT,
+	.recover     = m5632_recover,
+};
+
+#endif
+
+#ifdef	CONFIG_USB_AN2720
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * AnchorChips 2720 driver ... http://www.cypress.com
+ *
+ * This doesn't seem to have a way to detect whether the peer is
+ * connected, or need any reset handshaking.  It's got pretty big
+ * internal buffers (handles most of a frame's worth of data).
+ * Chip data sheets don't describe any vendor control messages.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info	an2720_info = {
+	.description =	"AnchorChips/Cypress 2720",
+	.flags       = FLAG_POINTTOPOINT,
+	// no reset available!
+	// no check_connect available!
+
+	.in = 2, .out = 2,		// direction distinguishes these
+};
+
+#endif	/* CONFIG_USB_AN2720 */
+
+
+#ifdef	CONFIG_USB_BELKIN
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Belkin F5U104 ... two NetChip 2280 devices + Atmel AVR microcontroller
+ *
+ * ... also two eTEK designs, including one sold as "Advance USBNET"
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info	belkin_info = {
+	.description =	"Belkin, eTEK, or compatible",
+	.flags       = FLAG_POINTTOPOINT,
+};
+
+#endif	/* CONFIG_USB_BELKIN */
+
+
+
+#ifdef	CONFIG_USB_EPSON2888
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * EPSON USB clients
+ *
+ * This is the same idea as Linux PDAs (below) except the firmware in the
+ * device might not be Tux-powered.  Epson provides reference firmware that
+ * implements this interface.  Product developers can reuse or modify that
+ * code, such as by using their own product and vendor codes.
+ *
+ * Support was from Juro Bystricky <bystricky.juro@erd.epson.com>
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info	epson2888_info = {
+	.description =	"Epson USB Device",
+	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
+
+	.in = 4, .out = 3,
+};
+
+#endif	/* CONFIG_USB_EPSON2888 */
+
+
+/*-------------------------------------------------------------------------
+ *
+ * info from Jonathan McDowell <noodles@earth.li>
+ *
+ *-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_KC2190
+#define HAVE_HARDWARE
+static const struct driver_info kc2190_info = {
+	.description =  "KC Technology KC-190",
+	.flags = FLAG_POINTTOPOINT,
+};
+#endif /* CONFIG_USB_KC2190 */
+
+
+#ifdef	CONFIG_USB_ARMLINUX
+#define	HAVE_HARDWARE
+
+/*-------------------------------------------------------------------------
+ *
+ * Intel's SA-1100 chip integrates basic USB support, and is used
+ * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
+ * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
+ * network using minimal USB framing data.
+ *
+ * This describes the driver currently in standard ARM Linux kernels.
+ * The Zaurus uses a different driver (see later).
+ *
+ * PXA25x and PXA210 use XScale cores (ARM v5TE) with better USB support
+ * and different USB endpoint numbering than the SA1100 devices.  The
+ * mach-pxa/usb-eth.c driver re-uses the device ids from mach-sa1100
+ * so we rely on the endpoint descriptors.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info	linuxdev_info = {
+	.description =	"Linux Device",
+	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
+};
+
+static const struct driver_info	yopy_info = {
+	.description =	"Yopy",
+	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
+};
+
+static const struct driver_info	blob_info = {
+	.description =	"Boot Loader OBject",
+	.check_connect = always_connected,
+	.flags = FLAG_POINTTOPOINT,
+};
+
+#endif	/* CONFIG_USB_ARMLINUX */
+
+
+/*-------------------------------------------------------------------------*/
+
+#ifndef	HAVE_HARDWARE
+#warning You need to configure some hardware for this driver
+#endif
+
+/*
+ * chip vendor names won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id	products [] = {
+
+#ifdef	CONFIG_USB_ALI_M5632
+{
+	USB_DEVICE (0x0402, 0x5632),	// ALi defaults
+	.driver_info =	(unsigned long) &ali_m5632_info,
+},
+{
+	USB_DEVICE (0x182d,0x207c),	// SiteCom CN-124
+	.driver_info =	(unsigned long) &ali_m5632_info,
+},
+#endif
+
+#ifdef	CONFIG_USB_AN2720
+{
+	USB_DEVICE (0x0547, 0x2720),	// AnchorChips defaults
+	.driver_info =	(unsigned long) &an2720_info,
+}, {
+	USB_DEVICE (0x0547, 0x2727),	// Xircom PGUNET
+	.driver_info =	(unsigned long) &an2720_info,
+},
+#endif
+
+#ifdef	CONFIG_USB_BELKIN
+{
+	USB_DEVICE (0x050d, 0x0004),	// Belkin
+	.driver_info =	(unsigned long) &belkin_info,
+}, {
+	USB_DEVICE (0x056c, 0x8100),	// eTEK
+	.driver_info =	(unsigned long) &belkin_info,
+}, {
+	USB_DEVICE (0x0525, 0x9901),	// Advance USBNET (eTEK)
+	.driver_info =	(unsigned long) &belkin_info,
+},
+#endif
+
+#ifdef	CONFIG_USB_EPSON2888
+{
+	USB_DEVICE (0x0525, 0x2888),	// EPSON USB client
+	.driver_info	= (unsigned long) &epson2888_info,
+},
+#endif
+
+#ifdef CONFIG_USB_KC2190
+{
+	USB_DEVICE (0x050f, 0x0190),	// KC-190
+	.driver_info =	(unsigned long) &kc2190_info,
+},
+#endif
+
+#ifdef	CONFIG_USB_ARMLINUX
+/*
+ * SA-1100 using standard ARM Linux kernels, or compatible.
+ * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
+ * The sa-1100 "usb-eth" driver handles the basic framing.
+ *
+ * PXA25x or PXA210 ...  these use a "usb-eth" driver much like
+ * the sa1100 one, but hardware uses different endpoint numbers.
+ *
+ * Or the Linux "Ethernet" gadget on hardware that can't talk
+ * CDC Ethernet (e.g., no altsettings), in either of two modes:
+ *  - acting just like the old "usb-eth" firmware, though
+ *    the implementation is different
+ *  - supporting RNDIS as the first/default configuration for
+ *    MS-Windows interop; Linux needs to use the other config
+ */
+{
+	// 1183 = 0x049F, both used as hex values?
+	// Compaq "Itsy" vendor/product id
+	USB_DEVICE (0x049F, 0x505A),	// usb-eth, or compatible
+	.driver_info =	(unsigned long) &linuxdev_info,
+}, {
+	USB_DEVICE (0x0E7E, 0x1001),	// G.Mate "Yopy"
+	.driver_info =	(unsigned long) &yopy_info,
+}, {
+	USB_DEVICE (0x8086, 0x07d3),	// "blob" bootloader
+	.driver_info =	(unsigned long) &blob_info,
+}, {
+	USB_DEVICE (0x1286, 0x8001),    // "blob" bootloader
+	.driver_info =  (unsigned long) &blob_info,
+}, {
+	// Linux Ethernet/RNDIS gadget, mostly on PXA, second config
+	// e.g. Gumstix, current OpenZaurus, ... or anything else
+	// that just enables this gadget option.
+	USB_DEVICE (0x0525, 0xa4a2),
+	.driver_info =	(unsigned long) &linuxdev_info,
+},
+#endif
+
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+/*-------------------------------------------------------------------------*/
+static int dummy_prereset(struct usb_interface *intf)
+{
+        return 0;
+}
+
+static int dummy_postreset(struct usb_interface *intf)
+{
+        return 0;
+}
+
+static struct usb_driver cdc_subset_driver = {
+	.name =		"cdc_subset",
+	.probe =	usbnet_probe,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.pre_reset =	dummy_prereset,
+	.post_reset =	dummy_postreset,
+	.disconnect =	usbnet_disconnect,
+	.id_table =	products,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(cdc_subset_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Simple 'CDC Subset' USB networking links");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/ch9200.c b/drivers/net/usb/ch9200.c
new file mode 100644
index 000000000..f69d9b902
--- /dev/null
+++ b/drivers/net/usb/ch9200.c
@@ -0,0 +1,426 @@
+/*
+ * USB 10M/100M ethernet adapter
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stddef.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+
+#define CH9200_VID		0x1A86
+#define CH9200_PID_E092		0xE092
+
+#define CTRL_TIMEOUT_MS		1000
+
+#define CONTROL_TIMEOUT_MS 1000
+
+#define REQUEST_READ	0x0E
+#define REQUEST_WRITE	0x0F
+
+/* Address space:
+ * 00-63 : MII
+ * 64-128: MAC
+ *
+ * Note: all accesses must be 16-bit
+ */
+
+#define MAC_REG_CTRL 64
+#define MAC_REG_STATUS 66
+#define MAC_REG_INTERRUPT_MASK 68
+#define MAC_REG_PHY_COMMAND 70
+#define MAC_REG_PHY_DATA 72
+#define MAC_REG_STATION_L 74
+#define MAC_REG_STATION_M 76
+#define MAC_REG_STATION_H 78
+#define MAC_REG_HASH_L 80
+#define MAC_REG_HASH_M1 82
+#define MAC_REG_HASH_M2 84
+#define MAC_REG_HASH_H 86
+#define MAC_REG_THRESHOLD 88
+#define MAC_REG_FIFO_DEPTH 90
+#define MAC_REG_PAUSE 92
+#define MAC_REG_FLOW_CONTROL 94
+
+/* Control register bits
+ *
+ * Note: bits 13 and 15 are reserved
+ */
+#define LOOPBACK		(0x01 << 14)
+#define BASE100X		(0x01 << 12)
+#define MBPS_10			(0x01 << 11)
+#define DUPLEX_MODE		(0x01 << 10)
+#define PAUSE_FRAME		(0x01 << 9)
+#define PROMISCUOUS		(0x01 << 8)
+#define MULTICAST		(0x01 << 7)
+#define BROADCAST		(0x01 << 6)
+#define HASH			(0x01 << 5)
+#define APPEND_PAD		(0x01 << 4)
+#define APPEND_CRC		(0x01 << 3)
+#define TRANSMITTER_ACTION	(0x01 << 2)
+#define RECEIVER_ACTION		(0x01 << 1)
+#define DMA_ACTION		(0x01 << 0)
+
+/* Status register bits
+ *
+ * Note: bits 7-15 are reserved
+ */
+#define ALIGNMENT		(0x01 << 6)
+#define FIFO_OVER_RUN		(0x01 << 5)
+#define FIFO_UNDER_RUN		(0x01 << 4)
+#define RX_ERROR		(0x01 << 3)
+#define RX_COMPLETE		(0x01 << 2)
+#define TX_ERROR		(0x01 << 1)
+#define TX_COMPLETE		(0x01 << 0)
+
+/* FIFO depth register bits
+ *
+ * Note: bits 6 and 14 are reserved
+ */
+
+#define ETH_TXBD		(0x01 << 15)
+#define ETN_TX_FIFO_DEPTH	(0x01 << 8)
+#define ETH_RXBD		(0x01 << 7)
+#define ETH_RX_FIFO_DEPTH	(0x01 << 0)
+
+static int control_read(struct usbnet *dev,
+			unsigned char request, unsigned short value,
+			unsigned short index, void *data, unsigned short size,
+			int timeout)
+{
+	unsigned char *buf = NULL;
+	unsigned char request_type;
+	int err = 0;
+
+	if (request == REQUEST_READ)
+		request_type = (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_OTHER);
+	else
+		request_type = (USB_DIR_IN | USB_TYPE_VENDOR |
+				USB_RECIP_DEVICE);
+
+	netdev_dbg(dev->net, "%s() index=0x%02x size=%d\n",
+		   __func__, index, size);
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	err = usb_control_msg(dev->udev,
+			      usb_rcvctrlpipe(dev->udev, 0),
+			      request, request_type, value, index, buf, size,
+			      timeout);
+	if (err == size)
+		memcpy(data, buf, size);
+	else if (err >= 0)
+		err = -EINVAL;
+	kfree(buf);
+
+err_out:
+	return err;
+}
+
+static int control_write(struct usbnet *dev, unsigned char request,
+			 unsigned short value, unsigned short index,
+			 void *data, unsigned short size, int timeout)
+{
+	unsigned char *buf = NULL;
+	unsigned char request_type;
+	int err = 0;
+
+	if (request == REQUEST_WRITE)
+		request_type = (USB_DIR_OUT | USB_TYPE_VENDOR |
+				USB_RECIP_OTHER);
+	else
+		request_type = (USB_DIR_OUT | USB_TYPE_VENDOR |
+				USB_RECIP_DEVICE);
+
+	netdev_dbg(dev->net, "%s() index=0x%02x size=%d\n",
+		   __func__, index, size);
+
+	if (data) {
+		buf = kmemdup(data, size, GFP_KERNEL);
+		if (!buf) {
+			err = -ENOMEM;
+			goto err_out;
+		}
+	}
+
+	err = usb_control_msg(dev->udev,
+			      usb_sndctrlpipe(dev->udev, 0),
+			      request, request_type, value, index, buf, size,
+			      timeout);
+	if (err >= 0 && err < size)
+		err = -EINVAL;
+	kfree(buf);
+
+	return 0;
+
+err_out:
+	return err;
+}
+
+static int ch9200_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	unsigned char buff[2];
+
+	netdev_dbg(netdev, "%s phy_id:%02x loc:%02x\n",
+		   __func__, phy_id, loc);
+
+	if (phy_id != 0)
+		return -ENODEV;
+
+	control_read(dev, REQUEST_READ, 0, loc * 2, buff, 0x02,
+		     CONTROL_TIMEOUT_MS);
+
+	return (buff[0] | buff[1] << 8);
+}
+
+static void ch9200_mdio_write(struct net_device *netdev,
+			      int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	unsigned char buff[2];
+
+	netdev_dbg(netdev, "%s() phy_id=%02x loc:%02x\n",
+		   __func__, phy_id, loc);
+
+	if (phy_id != 0)
+		return;
+
+	buff[0] = (unsigned char)val;
+	buff[1] = (unsigned char)(val >> 8);
+
+	control_write(dev, REQUEST_WRITE, 0, loc * 2, buff, 0x02,
+		      CONTROL_TIMEOUT_MS);
+}
+
+static int ch9200_link_reset(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd;
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+
+	netdev_dbg(dev->net, "%s() speed:%d duplex:%d\n",
+		   __func__, ecmd.speed, ecmd.duplex);
+
+	return 0;
+}
+
+static void ch9200_status(struct usbnet *dev, struct urb *urb)
+{
+	int link;
+	unsigned char *buf;
+
+	if (urb->actual_length < 16)
+		return;
+
+	buf = urb->transfer_buffer;
+	link = !!(buf[0] & 0x01);
+
+	if (link) {
+		netif_carrier_on(dev->net);
+		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+	} else {
+		netif_carrier_off(dev->net);
+	}
+}
+
+static struct sk_buff *ch9200_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	int i = 0;
+	int len = 0;
+	int tx_overhead = 0;
+
+	tx_overhead = 0x40;
+
+	len = skb->len;
+	if (skb_cow_head(skb, tx_overhead)) {
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+
+	__skb_push(skb, tx_overhead);
+	/* usbnet adds padding if length is a multiple of packet size
+	 * if so, adjust length value in header
+	 */
+	if ((skb->len % dev->maxpacket) == 0)
+		len++;
+
+	skb->data[0] = len;
+	skb->data[1] = len >> 8;
+	skb->data[2] = 0x00;
+	skb->data[3] = 0x80;
+
+	for (i = 4; i < 48; i++)
+		skb->data[i] = 0x00;
+
+	skb->data[48] = len;
+	skb->data[49] = len >> 8;
+	skb->data[50] = 0x00;
+	skb->data[51] = 0x80;
+
+	for (i = 52; i < 64; i++)
+		skb->data[i] = 0x00;
+
+	return skb;
+}
+
+static int ch9200_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int len = 0;
+	int rx_overhead = 0;
+
+	rx_overhead = 64;
+
+	if (unlikely(skb->len < rx_overhead)) {
+		dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	len = (skb->data[skb->len - 16] | skb->data[skb->len - 15] << 8);
+	skb_trim(skb, len);
+
+	return 1;
+}
+
+static int get_mac_address(struct usbnet *dev, unsigned char *data)
+{
+	int err = 0;
+	unsigned char mac_addr[0x06];
+	int rd_mac_len = 0;
+
+	netdev_dbg(dev->net, "%s:\n\tusbnet VID:%0x PID:%0x\n", __func__,
+		   le16_to_cpu(dev->udev->descriptor.idVendor),
+		   le16_to_cpu(dev->udev->descriptor.idProduct));
+
+	memset(mac_addr, 0, sizeof(mac_addr));
+	rd_mac_len = control_read(dev, REQUEST_READ, 0,
+				  MAC_REG_STATION_L, mac_addr, 0x02,
+				  CONTROL_TIMEOUT_MS);
+	rd_mac_len += control_read(dev, REQUEST_READ, 0, MAC_REG_STATION_M,
+				   mac_addr + 2, 0x02, CONTROL_TIMEOUT_MS);
+	rd_mac_len += control_read(dev, REQUEST_READ, 0, MAC_REG_STATION_H,
+				   mac_addr + 4, 0x02, CONTROL_TIMEOUT_MS);
+	if (rd_mac_len != ETH_ALEN)
+		err = -EINVAL;
+
+	data[0] = mac_addr[5];
+	data[1] = mac_addr[4];
+	data[2] = mac_addr[3];
+	data[3] = mac_addr[2];
+	data[4] = mac_addr[1];
+	data[5] = mac_addr[0];
+
+	return err;
+}
+
+static int ch9200_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int retval = 0;
+	unsigned char data[2];
+	u8 addr[ETH_ALEN];
+
+	retval = usbnet_get_endpoints(dev, intf);
+	if (retval)
+		return retval;
+
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = ch9200_mdio_read;
+	dev->mii.mdio_write = ch9200_mdio_write;
+	dev->mii.reg_num_mask = 0x1f;
+
+	dev->mii.phy_id_mask = 0x1f;
+
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	dev->rx_urb_size = 24 * 64 + 16;
+	mii_nway_restart(&dev->mii);
+
+	data[0] = 0x01;
+	data[1] = 0x0F;
+	retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_THRESHOLD, data,
+			       0x02, CONTROL_TIMEOUT_MS);
+
+	data[0] = 0xA0;
+	data[1] = 0x90;
+	retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_FIFO_DEPTH, data,
+			       0x02, CONTROL_TIMEOUT_MS);
+
+	data[0] = 0x30;
+	data[1] = 0x00;
+	retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_PAUSE, data,
+			       0x02, CONTROL_TIMEOUT_MS);
+
+	data[0] = 0x17;
+	data[1] = 0xD8;
+	retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_FLOW_CONTROL,
+			       data, 0x02, CONTROL_TIMEOUT_MS);
+
+	/* Undocumented register */
+	data[0] = 0x01;
+	data[1] = 0x00;
+	retval = control_write(dev, REQUEST_WRITE, 0, 254, data, 0x02,
+			       CONTROL_TIMEOUT_MS);
+
+	data[0] = 0x5F;
+	data[1] = 0x0D;
+	retval = control_write(dev, REQUEST_WRITE, 0, MAC_REG_CTRL, data, 0x02,
+			       CONTROL_TIMEOUT_MS);
+
+	retval = get_mac_address(dev, addr);
+	eth_hw_addr_set(dev->net, addr);
+
+	return retval;
+}
+
+static const struct driver_info ch9200_info = {
+	.description = "CH9200 USB to Network Adaptor",
+	.flags = FLAG_ETHER,
+	.bind = ch9200_bind,
+	.rx_fixup = ch9200_rx_fixup,
+	.tx_fixup = ch9200_tx_fixup,
+	.status = ch9200_status,
+	.link_reset = ch9200_link_reset,
+	.reset = ch9200_link_reset,
+};
+
+static const struct usb_device_id ch9200_products[] = {
+	{
+	 USB_DEVICE(0x1A86, 0xE092),
+	 .driver_info = (unsigned long)&ch9200_info,
+	 },
+	{},
+};
+
+MODULE_DEVICE_TABLE(usb, ch9200_products);
+
+static struct usb_driver ch9200_driver = {
+	.name = "ch9200",
+	.id_table = ch9200_products,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+};
+
+module_usb_driver(ch9200_driver);
+
+MODULE_DESCRIPTION("QinHeng CH9200 USB Network device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/cx82310_eth.c b/drivers/net/usb/cx82310_eth.c
new file mode 100644
index 000000000..79a47e2fd
--- /dev/null
+++ b/drivers/net/usb/cx82310_eth.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for USB ethernet port of Conexant CX82310-based ADSL routers
+ * Copyright (C) 2010 by Ondrej Zary
+ * some parts inspired by the cxacru driver
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+enum cx82310_cmd {
+	CMD_START		= 0x84,	/* no effect? */
+	CMD_STOP		= 0x85,	/* no effect? */
+	CMD_GET_STATUS		= 0x90,	/* returns nothing? */
+	CMD_GET_MAC_ADDR	= 0x91,	/* read MAC address */
+	CMD_GET_LINK_STATUS	= 0x92,	/* not useful, link is always up */
+	CMD_ETHERNET_MODE	= 0x99,	/* unknown, needed during init */
+};
+
+enum cx82310_status {
+	STATUS_UNDEFINED,
+	STATUS_SUCCESS,
+	STATUS_ERROR,
+	STATUS_UNSUPPORTED,
+	STATUS_UNIMPLEMENTED,
+	STATUS_PARAMETER_ERROR,
+	STATUS_DBG_LOOPBACK,
+};
+
+#define CMD_PACKET_SIZE	64
+#define CMD_TIMEOUT	100
+#define CMD_REPLY_RETRY 5
+
+#define CX82310_MTU	1514
+#define CMD_EP		0x01
+
+struct cx82310_priv {
+	struct work_struct reenable_work;
+	struct usbnet *dev;
+};
+
+/*
+ * execute control command
+ *  - optionally send some data (command parameters)
+ *  - optionally wait for the reply
+ *  - optionally read some data from the reply
+ */
+static int cx82310_cmd(struct usbnet *dev, enum cx82310_cmd cmd, bool reply,
+		       u8 *wdata, int wlen, u8 *rdata, int rlen)
+{
+	int actual_len, retries, ret;
+	struct usb_device *udev = dev->udev;
+	u8 *buf = kzalloc(CMD_PACKET_SIZE, GFP_KERNEL);
+
+	if (!buf)
+		return -ENOMEM;
+
+	/* create command packet */
+	buf[0] = cmd;
+	if (wdata)
+		memcpy(buf + 4, wdata, min_t(int, wlen, CMD_PACKET_SIZE - 4));
+
+	/* send command packet */
+	ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, CMD_EP), buf,
+			   CMD_PACKET_SIZE, &actual_len, CMD_TIMEOUT);
+	if (ret < 0) {
+		if (cmd != CMD_GET_LINK_STATUS)
+			netdev_err(dev->net, "send command %#x: error %d\n",
+				   cmd, ret);
+		goto end;
+	}
+
+	if (reply) {
+		/* wait for reply, retry if it's empty */
+		for (retries = 0; retries < CMD_REPLY_RETRY; retries++) {
+			ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, CMD_EP),
+					   buf, CMD_PACKET_SIZE, &actual_len,
+					   CMD_TIMEOUT);
+			if (ret < 0) {
+				if (cmd != CMD_GET_LINK_STATUS)
+					netdev_err(dev->net, "reply receive error %d\n",
+						   ret);
+				goto end;
+			}
+			if (actual_len > 0)
+				break;
+		}
+		if (actual_len == 0) {
+			netdev_err(dev->net, "no reply to command %#x\n", cmd);
+			ret = -EIO;
+			goto end;
+		}
+		if (buf[0] != cmd) {
+			netdev_err(dev->net, "got reply to command %#x, expected: %#x\n",
+				   buf[0], cmd);
+			ret = -EIO;
+			goto end;
+		}
+		if (buf[1] != STATUS_SUCCESS) {
+			netdev_err(dev->net, "command %#x failed: %#x\n", cmd,
+				   buf[1]);
+			ret = -EIO;
+			goto end;
+		}
+		if (rdata)
+			memcpy(rdata, buf + 4,
+			       min_t(int, rlen, CMD_PACKET_SIZE - 4));
+	}
+end:
+	kfree(buf);
+	return ret;
+}
+
+static int cx82310_enable_ethernet(struct usbnet *dev)
+{
+	int ret = cx82310_cmd(dev, CMD_ETHERNET_MODE, true, "\x01", 1, NULL, 0);
+
+	if (ret)
+		netdev_err(dev->net, "unable to enable ethernet mode: %d\n",
+			   ret);
+	return ret;
+}
+
+static void cx82310_reenable_work(struct work_struct *work)
+{
+	struct cx82310_priv *priv = container_of(work, struct cx82310_priv,
+						 reenable_work);
+	cx82310_enable_ethernet(priv->dev);
+}
+
+#define partial_len	data[0]		/* length of partial packet data */
+#define partial_rem	data[1]		/* remaining (missing) data length */
+#define partial_data	data[2]		/* partial packet data */
+
+static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	char buf[15];
+	struct usb_device *udev = dev->udev;
+	u8 link[3];
+	int timeout = 50;
+	struct cx82310_priv *priv;
+	u8 addr[ETH_ALEN];
+
+	/* avoid ADSL modems - continue only if iProduct is "USB NET CARD" */
+	if (usb_string(udev, udev->descriptor.iProduct, buf, sizeof(buf)) > 0
+	    && strcmp(buf, "USB NET CARD")) {
+		dev_info(&udev->dev, "ignoring: probably an ADSL modem\n");
+		return -ENODEV;
+	}
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		return ret;
+
+	/*
+	 * this must not include ethernet header as the device can send partial
+	 * packets with no header (and sometimes even empty URBs)
+	 */
+	dev->net->hard_header_len = 0;
+	/* we can send at most 1514 bytes of data (+ 2-byte header) per URB */
+	dev->hard_mtu = CX82310_MTU + 2;
+	/* we can receive URBs up to 4KB from the device */
+	dev->rx_urb_size = 4096;
+
+	dev->partial_data = (unsigned long) kmalloc(dev->hard_mtu, GFP_KERNEL);
+	if (!dev->partial_data)
+		return -ENOMEM;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto err_partial;
+	}
+	dev->driver_priv = priv;
+	INIT_WORK(&priv->reenable_work, cx82310_reenable_work);
+	priv->dev = dev;
+
+	/* wait for firmware to become ready (indicated by the link being up) */
+	while (--timeout) {
+		ret = cx82310_cmd(dev, CMD_GET_LINK_STATUS, true, NULL, 0,
+				  link, sizeof(link));
+		/* the command can time out during boot - it's not an error */
+		if (!ret && link[0] == 1 && link[2] == 1)
+			break;
+		msleep(500);
+	}
+	if (!timeout) {
+		netdev_err(dev->net, "firmware not ready in time\n");
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	/* enable ethernet mode (?) */
+	ret = cx82310_enable_ethernet(dev);
+	if (ret)
+		goto err;
+
+	/* get the MAC address */
+	ret = cx82310_cmd(dev, CMD_GET_MAC_ADDR, true, NULL, 0, addr, ETH_ALEN);
+	if (ret) {
+		netdev_err(dev->net, "unable to read MAC address: %d\n", ret);
+		goto err;
+	}
+	eth_hw_addr_set(dev->net, addr);
+
+	/* start (does not seem to have any effect?) */
+	ret = cx82310_cmd(dev, CMD_START, false, NULL, 0, NULL, 0);
+	if (ret)
+		goto err;
+
+	return 0;
+err:
+	kfree(dev->driver_priv);
+err_partial:
+	kfree((void *)dev->partial_data);
+	return ret;
+}
+
+static void cx82310_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct cx82310_priv *priv = dev->driver_priv;
+
+	kfree((void *)dev->partial_data);
+	cancel_work_sync(&priv->reenable_work);
+	kfree(dev->driver_priv);
+}
+
+/*
+ * RX is NOT easy - we can receive multiple packets per skb, each having 2-byte
+ * packet length at the beginning.
+ * The last packet might be incomplete (when it crosses the 4KB URB size),
+ * continuing in the next skb (without any headers).
+ * If a packet has odd length, there is one extra byte at the end (before next
+ * packet or at the end of the URB).
+ */
+static int cx82310_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int len;
+	struct sk_buff *skb2;
+	struct cx82310_priv *priv = dev->driver_priv;
+
+	/*
+	 * If the last skb ended with an incomplete packet, this skb contains
+	 * end of that packet at the beginning.
+	 */
+	if (dev->partial_rem) {
+		len = dev->partial_len + dev->partial_rem;
+		skb2 = alloc_skb(len, GFP_ATOMIC);
+		if (!skb2)
+			return 0;
+		skb_put(skb2, len);
+		memcpy(skb2->data, (void *)dev->partial_data,
+		       dev->partial_len);
+		memcpy(skb2->data + dev->partial_len, skb->data,
+		       dev->partial_rem);
+		usbnet_skb_return(dev, skb2);
+		skb_pull(skb, (dev->partial_rem + 1) & ~1);
+		dev->partial_rem = 0;
+		if (skb->len < 2)
+			return 1;
+	}
+
+	/* a skb can contain multiple packets */
+	while (skb->len > 1) {
+		/* first two bytes are packet length */
+		len = skb->data[0] | (skb->data[1] << 8);
+		skb_pull(skb, 2);
+
+		/* if last packet in the skb, let usbnet to process it */
+		if (len == skb->len || len + 1 == skb->len) {
+			skb_trim(skb, len);
+			break;
+		}
+
+		if (len == 0xffff) {
+			netdev_info(dev->net, "router was rebooted, re-enabling ethernet mode");
+			schedule_work(&priv->reenable_work);
+		} else if (len > CX82310_MTU) {
+			netdev_err(dev->net, "RX packet too long: %d B\n", len);
+			return 0;
+		}
+
+		/* incomplete packet, save it for the next skb */
+		if (len > skb->len) {
+			dev->partial_len = skb->len;
+			dev->partial_rem = len - skb->len;
+			memcpy((void *)dev->partial_data, skb->data,
+			       dev->partial_len);
+			skb_pull(skb, skb->len);
+			break;
+		}
+
+		skb2 = alloc_skb(len, GFP_ATOMIC);
+		if (!skb2)
+			return 0;
+		skb_put(skb2, len);
+		memcpy(skb2->data, skb->data, len);
+		/* process the packet */
+		usbnet_skb_return(dev, skb2);
+
+		skb_pull(skb, (len + 1) & ~1);
+	}
+
+	/* let usbnet process the last packet */
+	return 1;
+}
+
+/* TX is easy, just add 2 bytes of length at the beginning */
+static struct sk_buff *cx82310_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	int len = skb->len;
+
+	if (skb_cow_head(skb, 2)) {
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+	skb_push(skb, 2);
+
+	skb->data[0] = len;
+	skb->data[1] = len >> 8;
+
+	return skb;
+}
+
+
+static const struct driver_info	cx82310_info = {
+	.description	= "Conexant CX82310 USB ethernet",
+	.flags		= FLAG_ETHER,
+	.bind		= cx82310_bind,
+	.unbind		= cx82310_unbind,
+	.rx_fixup	= cx82310_rx_fixup,
+	.tx_fixup	= cx82310_tx_fixup,
+};
+
+#define USB_DEVICE_CLASS(vend, prod, cl, sc, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_DEV_INFO, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.bDeviceClass = (cl), \
+	.bDeviceSubClass = (sc), \
+	.bDeviceProtocol = (pr)
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE_CLASS(0x0572, 0xcb01, 0xff, 0, 0),
+		.driver_info = (unsigned long) &cx82310_info
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver cx82310_driver = {
+	.name		= "cx82310_eth",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.disconnect	= usbnet_disconnect,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(cx82310_driver);
+
+MODULE_AUTHOR("Ondrej Zary");
+MODULE_DESCRIPTION("Conexant CX82310-based ADSL router USB ethernet driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
new file mode 100644
index 000000000..99ec1d4a9
--- /dev/null
+++ b/drivers/net/usb/dm9601.c
@@ -0,0 +1,657 @@
+/*
+ * Davicom DM96xx USB 10/100Mbps ethernet devices
+ *
+ * Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+//#define DEBUG
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stddef.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+
+/* datasheet:
+ http://ptm2.cc.utu.fi/ftp/network/cards/DM9601/From_NET/DM9601-DS-P01-930914.pdf
+*/
+
+/* control requests */
+#define DM_READ_REGS	0x00
+#define DM_WRITE_REGS	0x01
+#define DM_READ_MEMS	0x02
+#define DM_WRITE_REG	0x03
+#define DM_WRITE_MEMS	0x05
+#define DM_WRITE_MEM	0x07
+
+/* registers */
+#define DM_NET_CTRL	0x00
+#define DM_RX_CTRL	0x05
+#define DM_SHARED_CTRL	0x0b
+#define DM_SHARED_ADDR	0x0c
+#define DM_SHARED_DATA	0x0d	/* low + high */
+#define DM_PHY_ADDR	0x10	/* 6 bytes */
+#define DM_MCAST_ADDR	0x16	/* 8 bytes */
+#define DM_GPR_CTRL	0x1e
+#define DM_GPR_DATA	0x1f
+#define DM_CHIP_ID	0x2c
+#define DM_MODE_CTRL	0x91	/* only on dm9620 */
+
+/* chip id values */
+#define ID_DM9601	0
+#define ID_DM9620	1
+
+#define DM_MAX_MCAST	64
+#define DM_MCAST_SIZE	8
+#define DM_EEPROM_LEN	256
+#define DM_TX_OVERHEAD	2	/* 2 byte header */
+#define DM_RX_OVERHEAD	7	/* 3 byte header + 4 byte crc tail */
+#define DM_TIMEOUT	1000
+
+static int dm_read(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+	err = usbnet_read_cmd(dev, DM_READ_REGS,
+			       USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       0, reg, data, length);
+	if(err != length && err >= 0)
+		err = -EINVAL;
+	return err;
+}
+
+static int dm_read_reg(struct usbnet *dev, u8 reg, u8 *value)
+{
+	return dm_read(dev, reg, 1, value);
+}
+
+static int dm_write(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+	err = usbnet_write_cmd(dev, DM_WRITE_REGS,
+				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				0, reg, data, length);
+
+	if (err >= 0 && err < length)
+		err = -EINVAL;
+	return err;
+}
+
+static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
+{
+	return usbnet_write_cmd(dev, DM_WRITE_REG,
+				USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				value, reg, NULL, 0);
+}
+
+static void dm_write_async(struct usbnet *dev, u8 reg, u16 length,
+			   const void *data)
+{
+	usbnet_write_cmd_async(dev, DM_WRITE_REGS,
+			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       0, reg, data, length);
+}
+
+static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
+{
+	usbnet_write_cmd_async(dev, DM_WRITE_REG,
+			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       value, reg, NULL, 0);
+}
+
+static int dm_read_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 *value)
+{
+	int ret, i;
+
+	mutex_lock(&dev->phy_mutex);
+
+	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
+	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0xc : 0x4);
+
+	for (i = 0; i < DM_TIMEOUT; i++) {
+		u8 tmp = 0;
+
+		udelay(1);
+		ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
+		if (ret < 0)
+			goto out;
+
+		/* ready */
+		if ((tmp & 1) == 0)
+			break;
+	}
+
+	if (i == DM_TIMEOUT) {
+		netdev_err(dev->net, "%s read timed out!\n", phy ? "phy" : "eeprom");
+		ret = -EIO;
+		goto out;
+	}
+
+	dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
+	ret = dm_read(dev, DM_SHARED_DATA, 2, value);
+
+	netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
+		   phy, reg, *value, ret);
+
+ out:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int dm_write_shared_word(struct usbnet *dev, int phy, u8 reg, __le16 value)
+{
+	int ret, i;
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = dm_write(dev, DM_SHARED_DATA, 2, &value);
+	if (ret < 0)
+		goto out;
+
+	dm_write_reg(dev, DM_SHARED_ADDR, phy ? (reg | 0x40) : reg);
+	dm_write_reg(dev, DM_SHARED_CTRL, phy ? 0x1a : 0x12);
+
+	for (i = 0; i < DM_TIMEOUT; i++) {
+		u8 tmp = 0;
+
+		udelay(1);
+		ret = dm_read_reg(dev, DM_SHARED_CTRL, &tmp);
+		if (ret < 0)
+			goto out;
+
+		/* ready */
+		if ((tmp & 1) == 0)
+			break;
+	}
+
+	if (i == DM_TIMEOUT) {
+		netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
+		ret = -EIO;
+		goto out;
+	}
+
+	dm_write_reg(dev, DM_SHARED_CTRL, 0x0);
+
+out:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int dm_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
+{
+	return dm_read_shared_word(dev, 0, offset, value);
+}
+
+
+
+static int dm9601_get_eeprom_len(struct net_device *dev)
+{
+	return DM_EEPROM_LEN;
+}
+
+static int dm9601_get_eeprom(struct net_device *net,
+			     struct ethtool_eeprom *eeprom, u8 * data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	__le16 *ebuf = (__le16 *) data;
+	int i;
+
+	/* access is 16bit */
+	if ((eeprom->offset % 2) || (eeprom->len % 2))
+		return -EINVAL;
+
+	for (i = 0; i < eeprom->len / 2; i++) {
+		if (dm_read_eeprom_word(dev, eeprom->offset / 2 + i,
+					&ebuf[i]) < 0)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static int dm9601_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	__le16 res;
+	int err;
+
+	if (phy_id) {
+		netdev_dbg(dev->net, "Only internal phy supported\n");
+		return 0;
+	}
+
+	err = dm_read_shared_word(dev, 1, loc, &res);
+	if (err < 0) {
+		netdev_err(dev->net, "MDIO read error: %d\n", err);
+		return err;
+	}
+
+	netdev_dbg(dev->net,
+		   "dm9601_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+static void dm9601_mdio_write(struct net_device *netdev, int phy_id, int loc,
+			      int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+
+	if (phy_id) {
+		netdev_dbg(dev->net, "Only internal phy supported\n");
+		return;
+	}
+
+	netdev_dbg(dev->net, "dm9601_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
+
+	dm_write_shared_word(dev, 1, loc, res);
+}
+
+static void dm9601_get_drvinfo(struct net_device *net,
+			       struct ethtool_drvinfo *info)
+{
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+}
+
+static u32 dm9601_get_link(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return mii_link_ok(&dev->mii);
+}
+
+static int dm9601_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops dm9601_ethtool_ops = {
+	.get_drvinfo	= dm9601_get_drvinfo,
+	.get_link	= dm9601_get_link,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_eeprom_len	= dm9601_get_eeprom_len,
+	.get_eeprom	= dm9601_get_eeprom,
+	.nway_reset	= usbnet_nway_reset,
+	.get_link_ksettings	= usbnet_get_link_ksettings_mii,
+	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
+};
+
+static void dm9601_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	/* We use the 20 byte dev->data for our 8 byte filter buffer
+	 * to avoid allocating memory that is tricky to free later */
+	u8 *hashes = (u8 *) & dev->data;
+	u8 rx_ctl = 0x31;
+
+	memset(hashes, 0x00, DM_MCAST_SIZE);
+	hashes[DM_MCAST_SIZE - 1] |= 0x80;	/* broadcast address */
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= 0x02;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > DM_MAX_MCAST) {
+		rx_ctl |= 0x08;
+	} else if (!netdev_mc_empty(net)) {
+		struct netdev_hw_addr *ha;
+
+		netdev_for_each_mc_addr(ha, net) {
+			u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			hashes[crc >> 3] |= 1 << (crc & 0x7);
+		}
+	}
+
+	dm_write_async(dev, DM_MCAST_ADDR, DM_MCAST_SIZE, hashes);
+	dm_write_reg_async(dev, DM_RX_CTRL, rx_ctl);
+}
+
+static void __dm9601_set_mac_address(struct usbnet *dev)
+{
+	dm_write_async(dev, DM_PHY_ADDR, ETH_ALEN, dev->net->dev_addr);
+}
+
+static int dm9601_set_mac_address(struct net_device *net, void *p)
+{
+	struct sockaddr *addr = p;
+	struct usbnet *dev = netdev_priv(net);
+
+	if (!is_valid_ether_addr(addr->sa_data)) {
+		dev_err(&net->dev, "not setting invalid mac address %pM\n",
+								addr->sa_data);
+		return -EINVAL;
+	}
+
+	eth_hw_addr_set(net, addr->sa_data);
+	__dm9601_set_mac_address(dev);
+
+	return 0;
+}
+
+static const struct net_device_ops dm9601_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= dm9601_ioctl,
+	.ndo_set_rx_mode	= dm9601_set_multicast,
+	.ndo_set_mac_address	= dm9601_set_mac_address,
+};
+
+static int dm9601_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	u8 mac[ETH_ALEN], id;
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		goto out;
+
+	dev->net->netdev_ops = &dm9601_netdev_ops;
+	dev->net->ethtool_ops = &dm9601_ethtool_ops;
+	dev->net->hard_header_len += DM_TX_OVERHEAD;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+	/* dm9620/21a require room for 4 byte padding, even in dm9601
+	 * mode, so we need +1 to be able to receive full size
+	 * ethernet frames.
+	 */
+	dev->rx_urb_size = dev->net->mtu + ETH_HLEN + DM_RX_OVERHEAD + 1;
+
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = dm9601_mdio_read;
+	dev->mii.mdio_write = dm9601_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+
+	/* reset */
+	dm_write_reg(dev, DM_NET_CTRL, 1);
+	udelay(20);
+
+	/* read MAC */
+	if (dm_read(dev, DM_PHY_ADDR, ETH_ALEN, mac) < 0) {
+		printk(KERN_ERR "Error reading MAC address\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/*
+	 * Overwrite the auto-generated address only with good ones.
+	 */
+	if (is_valid_ether_addr(mac))
+		eth_hw_addr_set(dev->net, mac);
+	else {
+		printk(KERN_WARNING
+			"dm9601: No valid MAC address in EEPROM, using %pM\n",
+			dev->net->dev_addr);
+		__dm9601_set_mac_address(dev);
+	}
+
+	if (dm_read_reg(dev, DM_CHIP_ID, &id) < 0) {
+		netdev_err(dev->net, "Error reading chip ID\n");
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* put dm9620 devices in dm9601 mode */
+	if (id == ID_DM9620) {
+		u8 mode;
+
+		if (dm_read_reg(dev, DM_MODE_CTRL, &mode) < 0) {
+			netdev_err(dev->net, "Error reading MODE_CTRL\n");
+			ret = -ENODEV;
+			goto out;
+		}
+		dm_write_reg(dev, DM_MODE_CTRL, mode & 0x7f);
+	}
+
+	/* power up phy */
+	dm_write_reg(dev, DM_GPR_CTRL, 1);
+	dm_write_reg(dev, DM_GPR_DATA, 0);
+
+	/* receive broadcast packets */
+	dm9601_set_multicast(dev->net);
+
+	dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	dm9601_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+			  ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	mii_nway_restart(&dev->mii);
+
+out:
+	return ret;
+}
+
+static int dm9601_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	u8 status;
+	int len;
+
+	/* format:
+	   b1: rx status
+	   b2: packet length (incl crc) low
+	   b3: packet length (incl crc) high
+	   b4..n-4: packet data
+	   bn-3..bn: ethernet crc
+	 */
+
+	if (unlikely(skb->len < DM_RX_OVERHEAD)) {
+		dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	status = skb->data[0];
+	len = (skb->data[1] | (skb->data[2] << 8)) - 4;
+
+	if (unlikely(status & 0xbf)) {
+		if (status & 0x01) dev->net->stats.rx_fifo_errors++;
+		if (status & 0x02) dev->net->stats.rx_crc_errors++;
+		if (status & 0x04) dev->net->stats.rx_frame_errors++;
+		if (status & 0x20) dev->net->stats.rx_missed_errors++;
+		if (status & 0x90) dev->net->stats.rx_length_errors++;
+		return 0;
+	}
+
+	skb_pull(skb, 3);
+	skb_trim(skb, len);
+
+	return 1;
+}
+
+static struct sk_buff *dm9601_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	int len, pad;
+
+	/* format:
+	   b1: packet length low
+	   b2: packet length high
+	   b3..n: packet data
+	*/
+
+	len = skb->len + DM_TX_OVERHEAD;
+
+	/* workaround for dm962x errata with tx fifo getting out of
+	 * sync if a USB bulk transfer retry happens right after a
+	 * packet with odd / maxpacket length by adding up to 3 bytes
+	 * padding.
+	 */
+	while ((len & 1) || !(len % dev->maxpacket))
+		len++;
+
+	len -= DM_TX_OVERHEAD; /* hw header doesn't count as part of length */
+	pad = len - skb->len;
+
+	if (skb_headroom(skb) < DM_TX_OVERHEAD || skb_tailroom(skb) < pad) {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, DM_TX_OVERHEAD, pad, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	__skb_push(skb, DM_TX_OVERHEAD);
+
+	if (pad) {
+		memset(skb->data + skb->len, 0, pad);
+		__skb_put(skb, pad);
+	}
+
+	skb->data[0] = len;
+	skb->data[1] = len >> 8;
+
+	return skb;
+}
+
+static void dm9601_status(struct usbnet *dev, struct urb *urb)
+{
+	int link;
+	u8 *buf;
+
+	/* format:
+	   b0: net status
+	   b1: tx status 1
+	   b2: tx status 2
+	   b3: rx status
+	   b4: rx overflow
+	   b5: rx count
+	   b6: tx count
+	   b7: gpr
+	*/
+
+	if (urb->actual_length < 8)
+		return;
+
+	buf = urb->transfer_buffer;
+
+	link = !!(buf[0] & 0x40);
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static int dm9601_link_reset(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+
+	netdev_dbg(dev->net, "link_reset() speed: %u duplex: %d\n",
+		   ethtool_cmd_speed(&ecmd), ecmd.duplex);
+
+	return 0;
+}
+
+static const struct driver_info dm9601_info = {
+	.description	= "Davicom DM96xx USB 10/100 Ethernet",
+	.flags		= FLAG_ETHER | FLAG_LINK_INTR,
+	.bind		= dm9601_bind,
+	.rx_fixup	= dm9601_rx_fixup,
+	.tx_fixup	= dm9601_tx_fixup,
+	.status		= dm9601_status,
+	.link_reset	= dm9601_link_reset,
+	.reset		= dm9601_link_reset,
+};
+
+static const struct usb_device_id products[] = {
+	{
+	 USB_DEVICE(0x07aa, 0x9601),	/* Corega FEther USB-TXC */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x9601),	/* Davicom USB-100 */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x6688),	/* ZT6688 USB NIC */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x0268),	/* ShanTou ST268 USB NIC */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x8515),	/* ADMtek ADM8515 USB NIC */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	USB_DEVICE(0x0a47, 0x9601),	/* Hirose USB-100 */
+	.driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	USB_DEVICE(0x0fe6, 0x8101),	/* DM9601 USB to Fast Ethernet Adapter */
+	.driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0fe6, 0x9700),	/* DM9601 USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x9000),	/* DM9000E */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x9620),	/* DM9620 USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	 },
+	{
+	 USB_DEVICE(0x0a46, 0x9621),	/* DM9621A USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
+	{
+	 USB_DEVICE(0x0a46, 0x9622),	/* DM9622 USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
+	{
+	 USB_DEVICE(0x0a46, 0x0269),	/* DM962OA USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
+	{
+	 USB_DEVICE(0x0a46, 0x1269),	/* DM9621A USB to Fast Ethernet Adapter */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
+	{
+	 USB_DEVICE(0x0586, 0x3427),	/* ZyXEL Keenetic Plus DSL xDSL modem */
+	 .driver_info = (unsigned long)&dm9601_info,
+	},
+	{},			// END
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver dm9601_driver = {
+	.name = "dm9601",
+	.id_table = products,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(dm9601_driver);
+
+MODULE_AUTHOR("Peter Korsgaard <jacmet@sunsite.dk>");
+MODULE_DESCRIPTION("Davicom DM96xx USB 10/100 ethernet devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/gl620a.c b/drivers/net/usb/gl620a.c
new file mode 100644
index 000000000..46af78caf
--- /dev/null
+++ b/drivers/net/usb/gl620a.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * GeneSys GL620USB-A based links
+ * Copyright (C) 2001 by Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
+ * Copyright (C) 2001 by Stanislav Brabec <utx@penguin.cz>
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
+
+
+/*
+ * GeneSys GL620USB-A (www.genesyslogic.com.tw)
+ *
+ * ... should partially interop with the Win32 driver for this hardware.
+ * The GeneSys docs imply there's some NDIS issue motivating this framing.
+ *
+ * Some info from GeneSys:
+ *  - GL620USB-A is full duplex; GL620USB is only half duplex for bulk.
+ *    (Some cables, like the BAFO-100c, use the half duplex version.)
+ *  - For the full duplex model, the low bit of the version code says
+ *    which side is which ("left/right").
+ *  - For the half duplex type, a control/interrupt handshake settles
+ *    the transfer direction.  (That's disabled here, partially coded.)
+ *    A control URB would block until other side writes an interrupt.
+ *
+ * Original code from Jiun-Jie Huang <huangjj@genesyslogic.com.tw>
+ * and merged into "usbnet" by Stanislav Brabec <utx@penguin.cz>.
+ */
+
+// control msg write command
+#define GENELINK_CONNECT_WRITE			0xF0
+// interrupt pipe index
+#define GENELINK_INTERRUPT_PIPE			0x03
+// interrupt read buffer size
+#define INTERRUPT_BUFSIZE			0x08
+// interrupt pipe interval value
+#define GENELINK_INTERRUPT_INTERVAL		0x10
+// max transmit packet number per transmit
+#define GL_MAX_TRANSMIT_PACKETS			32
+// max packet length
+#define GL_MAX_PACKET_LEN			1514
+// max receive buffer size
+#define GL_RCV_BUF_SIZE		\
+	(((GL_MAX_PACKET_LEN + 4) * GL_MAX_TRANSMIT_PACKETS) + 4)
+
+struct gl_packet {
+	__le32		packet_length;
+	char		packet_data[];
+};
+
+struct gl_header {
+	__le32			packet_count;
+	struct gl_packet	packets;
+};
+
+static int genelink_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct gl_header	*header;
+	struct gl_packet	*packet;
+	struct sk_buff		*gl_skb;
+	u32			size;
+	u32			count;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	header = (struct gl_header *) skb->data;
+
+	// get the packet count of the received skb
+	count = le32_to_cpu(header->packet_count);
+	if (count > GL_MAX_TRANSMIT_PACKETS) {
+		netdev_dbg(dev->net,
+			   "genelink: invalid received packet count %u\n",
+			   count);
+		return 0;
+	}
+
+	// set the current packet pointer to the first packet
+	packet = &header->packets;
+
+	// decrement the length for the packet count size 4 bytes
+	skb_pull(skb, 4);
+
+	while (count > 1) {
+		// get the packet length
+		size = le32_to_cpu(packet->packet_length);
+
+		// this may be a broken packet
+		if (size > GL_MAX_PACKET_LEN) {
+			netdev_dbg(dev->net, "genelink: invalid rx length %d\n",
+				   size);
+			return 0;
+		}
+
+		// allocate the skb for the individual packet
+		gl_skb = alloc_skb(size, GFP_ATOMIC);
+		if (gl_skb) {
+
+			// copy the packet data to the new skb
+			skb_put_data(gl_skb, packet->packet_data, size);
+			usbnet_skb_return(dev, gl_skb);
+		}
+
+		// advance to the next packet
+		packet = (struct gl_packet *)&packet->packet_data[size];
+		count--;
+
+		// shift the data pointer to the next gl_packet
+		skb_pull(skb, size + 4);
+	}
+
+	// skip the packet length field 4 bytes
+	skb_pull(skb, 4);
+
+	if (skb->len > GL_MAX_PACKET_LEN) {
+		netdev_dbg(dev->net, "genelink: invalid rx length %d\n",
+			   skb->len);
+		return 0;
+	}
+	return 1;
+}
+
+static struct sk_buff *
+genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	int 	padlen;
+	int	length = skb->len;
+	int	headroom = skb_headroom(skb);
+	int	tailroom = skb_tailroom(skb);
+	__le32	*packet_count;
+	__le32	*packet_len;
+
+	// FIXME:  magic numbers, bleech
+	padlen = ((skb->len + (4 + 4*1)) % 64) ? 0 : 1;
+
+	if ((!skb_cloned(skb))
+			&& ((headroom + tailroom) >= (padlen + (4 + 4*1)))) {
+		if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
+			skb->data = memmove(skb->head + (4 + 4*1),
+					     skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff	*skb2;
+		skb2 = skb_copy_expand(skb, (4 + 4*1) , padlen, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	// attach the packet count to the header
+	packet_count = skb_push(skb, (4 + 4 * 1));
+	packet_len = packet_count + 1;
+
+	*packet_count = cpu_to_le32(1);
+	*packet_len = cpu_to_le32(length);
+
+	// add padding byte
+	if ((skb->len % dev->maxpacket) == 0)
+		skb_put(skb, 1);
+
+	return skb;
+}
+
+static int genelink_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	dev->hard_mtu = GL_RCV_BUF_SIZE;
+	dev->net->hard_header_len += 4;
+	dev->in = usb_rcvbulkpipe(dev->udev, dev->driver_info->in);
+	dev->out = usb_sndbulkpipe(dev->udev, dev->driver_info->out);
+	return 0;
+}
+
+static const struct driver_info	genelink_info = {
+	.description =	"Genesys GeneLink",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_GL | FLAG_NO_SETINT,
+	.bind =		genelink_bind,
+	.rx_fixup =	genelink_rx_fixup,
+	.tx_fixup =	genelink_tx_fixup,
+
+	.in = 1, .out = 2,
+
+#ifdef	GENELINK_ACK
+	.check_connect =genelink_check_connect,
+#endif
+};
+
+static const struct usb_device_id	products [] = {
+
+{
+	USB_DEVICE(0x05e3, 0x0502),	// GL620USB-A
+	.driver_info =	(unsigned long) &genelink_info,
+},
+	/* NOT: USB_DEVICE(0x05e3, 0x0501),	// GL620USB
+	 * that's half duplex, not currently supported
+	 */
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver gl620a_driver = {
+	.name =		"gl620a",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(gl620a_driver);
+
+MODULE_AUTHOR("Jiun-Jie Huang");
+MODULE_DESCRIPTION("GL620-USB-A Host-to-Host Link cables");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
new file mode 100644
index 000000000..ce1f6081d
--- /dev/null
+++ b/drivers/net/usb/hso.c
@@ -0,0 +1,3320 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/******************************************************************************
+ *
+ * Driver for Option High Speed Mobile Devices.
+ *
+ *  Copyright (C) 2008 Option International
+ *                     Filip Aben <f.aben@option.com>
+ *                     Denis Joseph Barrow <d.barow@option.com>
+ *                     Jan Dumon <j.dumon@option.com>
+ *  Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
+ *  			<ajb@spheresystems.co.uk>
+ *  Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ *  Copyright (C) 2008 Novell, Inc.
+ *
+ *****************************************************************************/
+
+/******************************************************************************
+ *
+ * Description of the device:
+ *
+ * Interface 0:	Contains the IP network interface on the bulk end points.
+ *		The multiplexed serial ports are using the interrupt and
+ *		control endpoints.
+ *		Interrupt contains a bitmap telling which multiplexed
+ *		serialport needs servicing.
+ *
+ * Interface 1:	Diagnostics port, uses bulk only, do not submit urbs until the
+ *		port is opened, as this have a huge impact on the network port
+ *		throughput.
+ *
+ * Interface 2:	Standard modem interface - circuit switched interface, this
+ *		can be used to make a standard ppp connection however it
+ *              should not be used in conjunction with the IP network interface
+ *              enabled for USB performance reasons i.e. if using this set
+ *              ideally disable_net=1.
+ *
+ *****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/sched/signal.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/module.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/kmod.h>
+#include <linux/rfkill.h>
+#include <linux/ip.h>
+#include <linux/uaccess.h>
+#include <linux/usb/cdc.h>
+#include <net/arp.h>
+#include <asm/byteorder.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+
+#define MOD_AUTHOR			"Option Wireless"
+#define MOD_DESCRIPTION			"USB High Speed Option driver"
+
+#define HSO_MAX_NET_DEVICES		10
+#define HSO__MAX_MTU			2048
+#define DEFAULT_MTU			1500
+#define DEFAULT_MRU			1500
+
+#define CTRL_URB_RX_SIZE		1024
+#define CTRL_URB_TX_SIZE		64
+
+#define BULK_URB_RX_SIZE		4096
+#define BULK_URB_TX_SIZE		8192
+
+#define MUX_BULK_RX_BUF_SIZE		HSO__MAX_MTU
+#define MUX_BULK_TX_BUF_SIZE		HSO__MAX_MTU
+#define MUX_BULK_RX_BUF_COUNT		4
+#define USB_TYPE_OPTION_VENDOR		0x20
+
+/* These definitions are used with the struct hso_net flags element */
+/* - use *_bit operations on it. (bit indices not values.) */
+#define HSO_NET_RUNNING			0
+
+#define	HSO_NET_TX_TIMEOUT		(HZ*10)
+
+#define HSO_SERIAL_MAGIC		0x48534f31
+
+/* Number of ttys to handle */
+#define HSO_SERIAL_TTY_MINORS		256
+
+#define MAX_RX_URBS			2
+
+/*****************************************************************************/
+/* Debugging functions                                                       */
+/*****************************************************************************/
+#define hso_dbg(lvl, fmt, ...)						\
+do {									\
+	if ((lvl) & debug)						\
+		pr_info("[%d:%s] " fmt,					\
+			__LINE__, __func__, ##__VA_ARGS__);		\
+} while (0)
+
+/*****************************************************************************/
+/* Enumerators                                                               */
+/*****************************************************************************/
+enum pkt_parse_state {
+	WAIT_IP,
+	WAIT_DATA,
+	WAIT_SYNC
+};
+
+/*****************************************************************************/
+/* Structs                                                                   */
+/*****************************************************************************/
+
+struct hso_shared_int {
+	struct usb_endpoint_descriptor *intr_endp;
+	void *shared_intr_buf;
+	struct urb *shared_intr_urb;
+	struct usb_device *usb;
+	int use_count;
+	int ref_count;
+	struct mutex shared_int_lock;
+};
+
+struct hso_net {
+	struct hso_device *parent;
+	struct net_device *net;
+	struct rfkill *rfkill;
+	char name[24];
+
+	struct usb_endpoint_descriptor *in_endp;
+	struct usb_endpoint_descriptor *out_endp;
+
+	struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
+	struct urb *mux_bulk_tx_urb;
+	void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
+	void *mux_bulk_tx_buf;
+
+	struct sk_buff *skb_rx_buf;
+	struct sk_buff *skb_tx_buf;
+
+	enum pkt_parse_state rx_parse_state;
+	spinlock_t net_lock;
+
+	unsigned short rx_buf_size;
+	unsigned short rx_buf_missing;
+	struct iphdr rx_ip_hdr;
+
+	unsigned long flags;
+};
+
+enum rx_ctrl_state{
+	RX_IDLE,
+	RX_SENT,
+	RX_PENDING
+};
+
+#define BM_REQUEST_TYPE (0xa1)
+#define B_NOTIFICATION  (0x20)
+#define W_VALUE         (0x0)
+#define W_LENGTH        (0x2)
+
+#define B_OVERRUN       (0x1<<6)
+#define B_PARITY        (0x1<<5)
+#define B_FRAMING       (0x1<<4)
+#define B_RING_SIGNAL   (0x1<<3)
+#define B_BREAK         (0x1<<2)
+#define B_TX_CARRIER    (0x1<<1)
+#define B_RX_CARRIER    (0x1<<0)
+
+struct hso_serial_state_notification {
+	u8 bmRequestType;
+	u8 bNotification;
+	u16 wValue;
+	u16 wIndex;
+	u16 wLength;
+	u16 UART_state_bitmap;
+} __packed;
+
+struct hso_tiocmget {
+	struct mutex mutex;
+	wait_queue_head_t waitq;
+	int    intr_completed;
+	struct usb_endpoint_descriptor *endp;
+	struct urb *urb;
+	struct hso_serial_state_notification *serial_state_notification;
+	u16    prev_UART_state_bitmap;
+	struct uart_icount icount;
+};
+
+
+struct hso_serial {
+	struct hso_device *parent;
+	int magic;
+	u8 minor;
+
+	struct hso_shared_int *shared_int;
+
+	/* rx/tx urb could be either a bulk urb or a control urb depending
+	   on which serial port it is used on. */
+	struct urb *rx_urb[MAX_RX_URBS];
+	u8 num_rx_urbs;
+	u8 *rx_data[MAX_RX_URBS];
+	u16 rx_data_length;	/* should contain allocated length */
+
+	struct urb *tx_urb;
+	u8 *tx_data;
+	u8 *tx_buffer;
+	u16 tx_data_length;	/* should contain allocated length */
+	u16 tx_data_count;
+	u16 tx_buffer_count;
+	struct usb_ctrlrequest ctrl_req_tx;
+	struct usb_ctrlrequest ctrl_req_rx;
+
+	struct usb_endpoint_descriptor *in_endp;
+	struct usb_endpoint_descriptor *out_endp;
+
+	enum rx_ctrl_state rx_state;
+	u8 rts_state;
+	u8 dtr_state;
+	unsigned tx_urb_used:1;
+
+	struct tty_port port;
+	/* from usb_serial_port */
+	spinlock_t serial_lock;
+
+	int (*write_data) (struct hso_serial *serial);
+	struct hso_tiocmget  *tiocmget;
+	/* Hacks required to get flow control
+	 * working on the serial receive buffers
+	 * so as not to drop characters on the floor.
+	 */
+	int  curr_rx_urb_idx;
+	u8   rx_urb_filled[MAX_RX_URBS];
+	struct tasklet_struct unthrottle_tasklet;
+};
+
+struct hso_device {
+	union {
+		struct hso_serial *dev_serial;
+		struct hso_net *dev_net;
+	} port_data;
+
+	u32 port_spec;
+
+	u8 is_active;
+	u8 usb_gone;
+	struct work_struct async_get_intf;
+	struct work_struct async_put_intf;
+
+	struct usb_device *usb;
+	struct usb_interface *interface;
+
+	struct device *dev;
+	struct kref ref;
+	struct mutex mutex;
+};
+
+/* Type of interface */
+#define HSO_INTF_MASK		0xFF00
+#define	HSO_INTF_MUX		0x0100
+#define	HSO_INTF_BULK   	0x0200
+
+/* Type of port */
+#define HSO_PORT_MASK		0xFF
+#define HSO_PORT_NO_PORT	0x0
+#define	HSO_PORT_CONTROL	0x1
+#define	HSO_PORT_APP		0x2
+#define	HSO_PORT_GPS		0x3
+#define	HSO_PORT_PCSC		0x4
+#define	HSO_PORT_APP2		0x5
+#define HSO_PORT_GPS_CONTROL	0x6
+#define HSO_PORT_MSD		0x7
+#define HSO_PORT_VOICE		0x8
+#define HSO_PORT_DIAG2		0x9
+#define	HSO_PORT_DIAG		0x10
+#define	HSO_PORT_MODEM		0x11
+#define	HSO_PORT_NETWORK	0x12
+
+/* Additional device info */
+#define HSO_INFO_MASK		0xFF000000
+#define HSO_INFO_CRC_BUG	0x01000000
+
+/*****************************************************************************/
+/* Prototypes                                                                */
+/*****************************************************************************/
+/* Serial driver functions */
+static int hso_serial_tiocmset(struct tty_struct *tty,
+			       unsigned int set, unsigned int clear);
+static void ctrl_callback(struct urb *urb);
+static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
+static void hso_kick_transmit(struct hso_serial *serial);
+/* Helper functions */
+static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
+				   struct usb_device *usb, gfp_t gfp);
+static void handle_usb_error(int status, const char *function,
+			     struct hso_device *hso_dev);
+static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
+						  int type, int dir);
+static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
+static void hso_free_interface(struct usb_interface *intf);
+static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
+static int hso_stop_serial_device(struct hso_device *hso_dev);
+static int hso_start_net_device(struct hso_device *hso_dev);
+static void hso_free_shared_int(struct hso_shared_int *shared_int);
+static int hso_stop_net_device(struct hso_device *hso_dev);
+static void hso_serial_ref_free(struct kref *ref);
+static void hso_std_serial_read_bulk_callback(struct urb *urb);
+static int hso_mux_serial_read(struct hso_serial *serial);
+static void async_get_intf(struct work_struct *data);
+static void async_put_intf(struct work_struct *data);
+static int hso_put_activity(struct hso_device *hso_dev);
+static int hso_get_activity(struct hso_device *hso_dev);
+static void tiocmget_intr_callback(struct urb *urb);
+/*****************************************************************************/
+/* Helping functions                                                         */
+/*****************************************************************************/
+
+/* #define DEBUG */
+
+static inline struct hso_net *dev2net(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_net;
+}
+
+static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_serial;
+}
+
+/* Debugging functions */
+#ifdef DEBUG
+static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
+		     unsigned int len)
+{
+	static char name[255];
+
+	sprintf(name, "hso[%d:%s]", line_count, func_name);
+	print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
+}
+
+#define DUMP(buf_, len_)	\
+	dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
+
+#define DUMP1(buf_, len_)			\
+	do {					\
+		if (0x01 & debug)		\
+			DUMP(buf_, len_);	\
+	} while (0)
+#else
+#define DUMP(buf_, len_)
+#define DUMP1(buf_, len_)
+#endif
+
+/* module parameters */
+static int debug;
+static int tty_major;
+static int disable_net;
+
+/* driver info */
+static const char driver_name[] = "hso";
+static const char tty_filename[] = "ttyHS";
+static const char *version = __FILE__ ": " MOD_AUTHOR;
+/* the usb driver itself (registered in hso_init) */
+static struct usb_driver hso_driver;
+/* serial structures */
+static struct tty_driver *tty_drv;
+static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
+static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
+static DEFINE_SPINLOCK(serial_table_lock);
+
+static const s32 default_port_spec[] = {
+	HSO_INTF_MUX | HSO_PORT_NETWORK,
+	HSO_INTF_BULK | HSO_PORT_DIAG,
+	HSO_INTF_BULK | HSO_PORT_MODEM,
+	0
+};
+
+static const s32 icon321_port_spec[] = {
+	HSO_INTF_MUX | HSO_PORT_NETWORK,
+	HSO_INTF_BULK | HSO_PORT_DIAG2,
+	HSO_INTF_BULK | HSO_PORT_MODEM,
+	HSO_INTF_BULK | HSO_PORT_DIAG,
+	0
+};
+
+#define default_port_device(vendor, product)	\
+	USB_DEVICE(vendor, product),	\
+		.driver_info = (kernel_ulong_t)default_port_spec
+
+#define icon321_port_device(vendor, product)	\
+	USB_DEVICE(vendor, product),	\
+		.driver_info = (kernel_ulong_t)icon321_port_spec
+
+/* list of devices we support */
+static const struct usb_device_id hso_ids[] = {
+	{default_port_device(0x0af0, 0x6711)},
+	{default_port_device(0x0af0, 0x6731)},
+	{default_port_device(0x0af0, 0x6751)},
+	{default_port_device(0x0af0, 0x6771)},
+	{default_port_device(0x0af0, 0x6791)},
+	{default_port_device(0x0af0, 0x6811)},
+	{default_port_device(0x0af0, 0x6911)},
+	{default_port_device(0x0af0, 0x6951)},
+	{default_port_device(0x0af0, 0x6971)},
+	{default_port_device(0x0af0, 0x7011)},
+	{default_port_device(0x0af0, 0x7031)},
+	{default_port_device(0x0af0, 0x7051)},
+	{default_port_device(0x0af0, 0x7071)},
+	{default_port_device(0x0af0, 0x7111)},
+	{default_port_device(0x0af0, 0x7211)},
+	{default_port_device(0x0af0, 0x7251)},
+	{default_port_device(0x0af0, 0x7271)},
+	{default_port_device(0x0af0, 0x7311)},
+	{default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */
+	{icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */
+	{icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */
+	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
+	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
+	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
+	{USB_DEVICE(0x0af0, 0x7381)},		/* GE40x */
+	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
+	{USB_DEVICE(0x0af0, 0x7501)},		/* GTM 382 */
+	{USB_DEVICE(0x0af0, 0x7601)},		/* GE40x */
+	{USB_DEVICE(0x0af0, 0x7701)},
+	{USB_DEVICE(0x0af0, 0x7706)},
+	{USB_DEVICE(0x0af0, 0x7801)},
+	{USB_DEVICE(0x0af0, 0x7901)},
+	{USB_DEVICE(0x0af0, 0x7A01)},
+	{USB_DEVICE(0x0af0, 0x7A05)},
+	{USB_DEVICE(0x0af0, 0x8200)},
+	{USB_DEVICE(0x0af0, 0x8201)},
+	{USB_DEVICE(0x0af0, 0x8300)},
+	{USB_DEVICE(0x0af0, 0x8302)},
+	{USB_DEVICE(0x0af0, 0x8304)},
+	{USB_DEVICE(0x0af0, 0x8400)},
+	{USB_DEVICE(0x0af0, 0x8600)},
+	{USB_DEVICE(0x0af0, 0x8800)},
+	{USB_DEVICE(0x0af0, 0x8900)},
+	{USB_DEVICE(0x0af0, 0x9000)},
+	{USB_DEVICE(0x0af0, 0x9200)},		/* Option GTM671WFS */
+	{USB_DEVICE(0x0af0, 0xd035)},
+	{USB_DEVICE(0x0af0, 0xd055)},
+	{USB_DEVICE(0x0af0, 0xd155)},
+	{USB_DEVICE(0x0af0, 0xd255)},
+	{USB_DEVICE(0x0af0, 0xd057)},
+	{USB_DEVICE(0x0af0, 0xd157)},
+	{USB_DEVICE(0x0af0, 0xd257)},
+	{USB_DEVICE(0x0af0, 0xd357)},
+	{USB_DEVICE(0x0af0, 0xd058)},
+	{USB_DEVICE(0x0af0, 0xc100)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, hso_ids);
+
+/* Sysfs attribute */
+static ssize_t hsotype_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct hso_device *hso_dev = dev_get_drvdata(dev);
+	char *port_name;
+
+	if (!hso_dev)
+		return 0;
+
+	switch (hso_dev->port_spec & HSO_PORT_MASK) {
+	case HSO_PORT_CONTROL:
+		port_name = "Control";
+		break;
+	case HSO_PORT_APP:
+		port_name = "Application";
+		break;
+	case HSO_PORT_APP2:
+		port_name = "Application2";
+		break;
+	case HSO_PORT_GPS:
+		port_name = "GPS";
+		break;
+	case HSO_PORT_GPS_CONTROL:
+		port_name = "GPS Control";
+		break;
+	case HSO_PORT_PCSC:
+		port_name = "PCSC";
+		break;
+	case HSO_PORT_DIAG:
+		port_name = "Diagnostic";
+		break;
+	case HSO_PORT_DIAG2:
+		port_name = "Diagnostic2";
+		break;
+	case HSO_PORT_MODEM:
+		port_name = "Modem";
+		break;
+	case HSO_PORT_NETWORK:
+		port_name = "Network";
+		break;
+	default:
+		port_name = "Unknown";
+		break;
+	}
+
+	return sprintf(buf, "%s\n", port_name);
+}
+static DEVICE_ATTR_RO(hsotype);
+
+static struct attribute *hso_serial_dev_attrs[] = {
+	&dev_attr_hsotype.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(hso_serial_dev);
+
+static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
+{
+	int idx;
+
+	for (idx = 0; idx < serial->num_rx_urbs; idx++)
+		if (serial->rx_urb[idx] == urb)
+			return idx;
+	dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
+	return -1;
+}
+
+/* converts mux value to a port spec value */
+static u32 hso_mux_to_port(int mux)
+{
+	u32 result;
+
+	switch (mux) {
+	case 0x1:
+		result = HSO_PORT_CONTROL;
+		break;
+	case 0x2:
+		result = HSO_PORT_APP;
+		break;
+	case 0x4:
+		result = HSO_PORT_PCSC;
+		break;
+	case 0x8:
+		result = HSO_PORT_GPS;
+		break;
+	case 0x10:
+		result = HSO_PORT_APP2;
+		break;
+	default:
+		result = HSO_PORT_NO_PORT;
+	}
+	return result;
+}
+
+/* converts port spec value to a mux value */
+static u32 hso_port_to_mux(int port)
+{
+	u32 result;
+
+	switch (port & HSO_PORT_MASK) {
+	case HSO_PORT_CONTROL:
+		result = 0x0;
+		break;
+	case HSO_PORT_APP:
+		result = 0x1;
+		break;
+	case HSO_PORT_PCSC:
+		result = 0x2;
+		break;
+	case HSO_PORT_GPS:
+		result = 0x3;
+		break;
+	case HSO_PORT_APP2:
+		result = 0x4;
+		break;
+	default:
+		result = 0x0;
+	}
+	return result;
+}
+
+static struct hso_serial *get_serial_by_shared_int_and_type(
+					struct hso_shared_int *shared_int,
+					int mux)
+{
+	int i, port;
+
+	port = hso_mux_to_port(mux);
+
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+		if (serial_table[i] &&
+		    (dev2ser(serial_table[i])->shared_int == shared_int) &&
+		    ((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
+			return dev2ser(serial_table[i]);
+		}
+	}
+
+	return NULL;
+}
+
+static struct hso_serial *get_serial_by_index(unsigned index)
+{
+	struct hso_serial *serial = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial_table_lock, flags);
+	if (serial_table[index])
+		serial = dev2ser(serial_table[index]);
+	spin_unlock_irqrestore(&serial_table_lock, flags);
+
+	return serial;
+}
+
+static int obtain_minor(struct hso_serial *serial)
+{
+	int index;
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial_table_lock, flags);
+	for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
+		if (serial_table[index] == NULL) {
+			serial_table[index] = serial->parent;
+			serial->minor = index;
+			spin_unlock_irqrestore(&serial_table_lock, flags);
+			return 0;
+		}
+	}
+	spin_unlock_irqrestore(&serial_table_lock, flags);
+
+	pr_err("%s: no free serial devices in table\n", __func__);
+	return -1;
+}
+
+static void release_minor(struct hso_serial *serial)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial_table_lock, flags);
+	serial_table[serial->minor] = NULL;
+	spin_unlock_irqrestore(&serial_table_lock, flags);
+}
+
+static void handle_usb_error(int status, const char *function,
+			     struct hso_device *hso_dev)
+{
+	char *explanation;
+
+	switch (status) {
+	case -ENODEV:
+		explanation = "no device";
+		break;
+	case -ENOENT:
+		explanation = "endpoint not enabled";
+		break;
+	case -EPIPE:
+		explanation = "endpoint stalled";
+		break;
+	case -ENOSPC:
+		explanation = "not enough bandwidth";
+		break;
+	case -ESHUTDOWN:
+		explanation = "device disabled";
+		break;
+	case -EHOSTUNREACH:
+		explanation = "device suspended";
+		break;
+	case -EINVAL:
+	case -EAGAIN:
+	case -EFBIG:
+	case -EMSGSIZE:
+		explanation = "internal error";
+		break;
+	case -EILSEQ:
+	case -EPROTO:
+	case -ETIME:
+	case -ETIMEDOUT:
+		explanation = "protocol error";
+		if (hso_dev)
+			usb_queue_reset_device(hso_dev->interface);
+		break;
+	default:
+		explanation = "unknown status";
+		break;
+	}
+
+	/* log a meaningful explanation of an USB status */
+	hso_dbg(0x1, "%s: received USB status - %s (%d)\n",
+		function, explanation, status);
+}
+
+/* Network interface functions */
+
+/* called when net interface is brought up by ifconfig */
+static int hso_net_open(struct net_device *net)
+{
+	struct hso_net *odev = netdev_priv(net);
+	unsigned long flags = 0;
+
+	if (!odev) {
+		dev_err(&net->dev, "No net device !\n");
+		return -ENODEV;
+	}
+
+	odev->skb_tx_buf = NULL;
+
+	/* setup environment */
+	spin_lock_irqsave(&odev->net_lock, flags);
+	odev->rx_parse_state = WAIT_IP;
+	odev->rx_buf_size = 0;
+	odev->rx_buf_missing = sizeof(struct iphdr);
+	spin_unlock_irqrestore(&odev->net_lock, flags);
+
+	/* We are up and running. */
+	set_bit(HSO_NET_RUNNING, &odev->flags);
+	hso_start_net_device(odev->parent);
+
+	/* Tell the kernel we are ready to start receiving from it */
+	netif_start_queue(net);
+
+	return 0;
+}
+
+/* called when interface is brought down by ifconfig */
+static int hso_net_close(struct net_device *net)
+{
+	struct hso_net *odev = netdev_priv(net);
+
+	/* we don't need the queue anymore */
+	netif_stop_queue(net);
+	/* no longer running */
+	clear_bit(HSO_NET_RUNNING, &odev->flags);
+
+	hso_stop_net_device(odev->parent);
+
+	/* done */
+	return 0;
+}
+
+/* USB tells is xmit done, we should start the netqueue again */
+static void write_bulk_callback(struct urb *urb)
+{
+	struct hso_net *odev = urb->context;
+	int status = urb->status;
+
+	/* Sanity check */
+	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
+		dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
+		return;
+	}
+
+	/* Do we still have a valid kernel network device? */
+	if (!netif_device_present(odev->net)) {
+		dev_err(&urb->dev->dev, "%s: net device not present\n",
+			__func__);
+		return;
+	}
+
+	/* log status, but don't act on it, we don't need to resubmit anything
+	 * anyhow */
+	if (status)
+		handle_usb_error(status, __func__, odev->parent);
+
+	hso_put_activity(odev->parent);
+
+	/* Tell the network interface we are ready for another frame */
+	netif_wake_queue(odev->net);
+}
+
+/* called by kernel when we need to transmit a packet */
+static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
+					    struct net_device *net)
+{
+	struct hso_net *odev = netdev_priv(net);
+	int result;
+
+	/* Tell the kernel, "No more frames 'til we are done with this one." */
+	netif_stop_queue(net);
+	if (hso_get_activity(odev->parent) == -EAGAIN) {
+		odev->skb_tx_buf = skb;
+		return NETDEV_TX_OK;
+	}
+
+	/* log if asked */
+	DUMP1(skb->data, skb->len);
+	/* Copy it from kernel memory to OUR memory */
+	memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
+	hso_dbg(0x1, "len: %d/%d\n", skb->len, MUX_BULK_TX_BUF_SIZE);
+
+	/* Fill in the URB for shipping it out. */
+	usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
+			  odev->parent->usb,
+			  usb_sndbulkpipe(odev->parent->usb,
+					  odev->out_endp->
+					  bEndpointAddress & 0x7F),
+			  odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
+			  odev);
+
+	/* Deal with the Zero Length packet problem, I hope */
+	odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
+
+	/* Send the URB on its merry way. */
+	result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
+	if (result) {
+		dev_warn(&odev->parent->interface->dev,
+			"failed mux_bulk_tx_urb %d\n", result);
+		net->stats.tx_errors++;
+		netif_start_queue(net);
+	} else {
+		net->stats.tx_packets++;
+		net->stats.tx_bytes += skb->len;
+	}
+	dev_kfree_skb(skb);
+	/* we're done */
+	return NETDEV_TX_OK;
+}
+
+static const struct ethtool_ops ops = {
+	.get_link = ethtool_op_get_link
+};
+
+/* called when a packet did not ack after watchdogtimeout */
+static void hso_net_tx_timeout(struct net_device *net, unsigned int txqueue)
+{
+	struct hso_net *odev = netdev_priv(net);
+
+	if (!odev)
+		return;
+
+	/* Tell syslog we are hosed. */
+	dev_warn(&net->dev, "Tx timed out.\n");
+
+	/* Tear the waiting frame off the list */
+	if (odev->mux_bulk_tx_urb)
+		usb_unlink_urb(odev->mux_bulk_tx_urb);
+
+	/* Update statistics */
+	net->stats.tx_errors++;
+}
+
+/* make a real packet from the received USB buffer */
+static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
+			unsigned int count, unsigned char is_eop)
+{
+	unsigned short temp_bytes;
+	unsigned short buffer_offset = 0;
+	unsigned short frame_len;
+
+	/* log if needed */
+	hso_dbg(0x1, "Rx %d bytes\n", count);
+	DUMP(ip_pkt, min(128, (int)count));
+
+	while (count) {
+		switch (odev->rx_parse_state) {
+		case WAIT_IP:
+			/* waiting for IP header. */
+			/* wanted bytes - size of ip header */
+			temp_bytes =
+			    (count <
+			     odev->rx_buf_missing) ? count : odev->
+			    rx_buf_missing;
+
+			memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
+			       odev->rx_buf_size, ip_pkt + buffer_offset,
+			       temp_bytes);
+
+			odev->rx_buf_size += temp_bytes;
+			buffer_offset += temp_bytes;
+			odev->rx_buf_missing -= temp_bytes;
+			count -= temp_bytes;
+
+			if (!odev->rx_buf_missing) {
+				/* header is complete allocate an sk_buffer and
+				 * continue to WAIT_DATA */
+				frame_len = ntohs(odev->rx_ip_hdr.tot_len);
+
+				if ((frame_len > DEFAULT_MRU) ||
+				    (frame_len < sizeof(struct iphdr))) {
+					dev_err(&odev->net->dev,
+						"Invalid frame (%d) length\n",
+						frame_len);
+					odev->rx_parse_state = WAIT_SYNC;
+					continue;
+				}
+				/* Allocate an sk_buff */
+				odev->skb_rx_buf = netdev_alloc_skb(odev->net,
+								    frame_len);
+				if (!odev->skb_rx_buf) {
+					/* We got no receive buffer. */
+					hso_dbg(0x1, "could not allocate memory\n");
+					odev->rx_parse_state = WAIT_SYNC;
+					continue;
+				}
+
+				/* Copy what we got so far. make room for iphdr
+				 * after tail. */
+				skb_put_data(odev->skb_rx_buf,
+					     (char *)&(odev->rx_ip_hdr),
+					     sizeof(struct iphdr));
+
+				/* ETH_HLEN */
+				odev->rx_buf_size = sizeof(struct iphdr);
+
+				/* Filip actually use .tot_len */
+				odev->rx_buf_missing =
+				    frame_len - sizeof(struct iphdr);
+				odev->rx_parse_state = WAIT_DATA;
+			}
+			break;
+
+		case WAIT_DATA:
+			temp_bytes = (count < odev->rx_buf_missing)
+					? count : odev->rx_buf_missing;
+
+			/* Copy the rest of the bytes that are left in the
+			 * buffer into the waiting sk_buf. */
+			/* Make room for temp_bytes after tail. */
+			skb_put_data(odev->skb_rx_buf,
+				     ip_pkt + buffer_offset,
+				     temp_bytes);
+
+			odev->rx_buf_missing -= temp_bytes;
+			count -= temp_bytes;
+			buffer_offset += temp_bytes;
+			odev->rx_buf_size += temp_bytes;
+			if (!odev->rx_buf_missing) {
+				/* Packet is complete. Inject into stack. */
+				/* We have IP packet here */
+				odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
+				skb_reset_mac_header(odev->skb_rx_buf);
+
+				/* Ship it off to the kernel */
+				netif_rx(odev->skb_rx_buf);
+				/* No longer our buffer. */
+				odev->skb_rx_buf = NULL;
+
+				/* update out statistics */
+				odev->net->stats.rx_packets++;
+
+				odev->net->stats.rx_bytes += odev->rx_buf_size;
+
+				odev->rx_buf_size = 0;
+				odev->rx_buf_missing = sizeof(struct iphdr);
+				odev->rx_parse_state = WAIT_IP;
+			}
+			break;
+
+		case WAIT_SYNC:
+			hso_dbg(0x1, " W_S\n");
+			count = 0;
+			break;
+		default:
+			hso_dbg(0x1, "\n");
+			count--;
+			break;
+		}
+	}
+
+	/* Recovery mechanism for WAIT_SYNC state. */
+	if (is_eop) {
+		if (odev->rx_parse_state == WAIT_SYNC) {
+			odev->rx_parse_state = WAIT_IP;
+			odev->rx_buf_size = 0;
+			odev->rx_buf_missing = sizeof(struct iphdr);
+		}
+	}
+}
+
+static void fix_crc_bug(struct urb *urb, __le16 max_packet_size)
+{
+	static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
+	u32 rest = urb->actual_length % le16_to_cpu(max_packet_size);
+
+	if (((rest == 5) || (rest == 6)) &&
+	    !memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4,
+		    crc_check, 4)) {
+		urb->actual_length -= 4;
+	}
+}
+
+/* Moving data from usb to kernel (in interrupt state) */
+static void read_bulk_callback(struct urb *urb)
+{
+	struct hso_net *odev = urb->context;
+	struct net_device *net;
+	int result;
+	unsigned long flags;
+	int status = urb->status;
+
+	/* is al ok?  (Filip: Who's Al ?) */
+	if (status) {
+		handle_usb_error(status, __func__, odev->parent);
+		return;
+	}
+
+	/* Sanity check */
+	if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
+		hso_dbg(0x1, "BULK IN callback but driver is not active!\n");
+		return;
+	}
+	usb_mark_last_busy(urb->dev);
+
+	net = odev->net;
+
+	if (!netif_device_present(net)) {
+		/* Somebody killed our network interface... */
+		return;
+	}
+
+	if (odev->parent->port_spec & HSO_INFO_CRC_BUG)
+		fix_crc_bug(urb, odev->in_endp->wMaxPacketSize);
+
+	/* do we even have a packet? */
+	if (urb->actual_length) {
+		/* Handle the IP stream, add header and push it onto network
+		 * stack if the packet is complete. */
+		spin_lock_irqsave(&odev->net_lock, flags);
+		packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
+			    (urb->transfer_buffer_length >
+			     urb->actual_length) ? 1 : 0);
+		spin_unlock_irqrestore(&odev->net_lock, flags);
+	}
+
+	/* We are done with this URB, resubmit it. Prep the USB to wait for
+	 * another frame. Reuse same as received. */
+	usb_fill_bulk_urb(urb,
+			  odev->parent->usb,
+			  usb_rcvbulkpipe(odev->parent->usb,
+					  odev->in_endp->
+					  bEndpointAddress & 0x7F),
+			  urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
+			  read_bulk_callback, odev);
+
+	/* Give this to the USB subsystem so it can tell us when more data
+	 * arrives. */
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_warn(&odev->parent->interface->dev,
+			 "%s failed submit mux_bulk_rx_urb %d\n", __func__,
+			 result);
+}
+
+/* Serial driver functions */
+
+static void hso_init_termios(struct ktermios *termios)
+{
+	/*
+	 * The default requirements for this device are:
+	 */
+	termios->c_iflag &=
+		~(IGNBRK	/* disable ignore break */
+		| BRKINT	/* disable break causes interrupt */
+		| PARMRK	/* disable mark parity errors */
+		| ISTRIP	/* disable clear high bit of input characters */
+		| INLCR		/* disable translate NL to CR */
+		| IGNCR		/* disable ignore CR */
+		| ICRNL		/* disable translate CR to NL */
+		| IXON);	/* disable enable XON/XOFF flow control */
+
+	/* disable postprocess output characters */
+	termios->c_oflag &= ~OPOST;
+
+	termios->c_lflag &=
+		~(ECHO		/* disable echo input characters */
+		| ECHONL	/* disable echo new line */
+		| ICANON	/* disable erase, kill, werase, and rprnt
+				   special characters */
+		| ISIG		/* disable interrupt, quit, and suspend special
+				   characters */
+		| IEXTEN);	/* disable non-POSIX special characters */
+
+	termios->c_cflag &=
+		~(CSIZE		/* no size */
+		| PARENB	/* disable parity bit */
+		| CBAUD		/* clear current baud rate */
+		| CBAUDEX);	/* clear current buad rate */
+
+	termios->c_cflag |= CS8;	/* character size 8 bits */
+
+	/* baud rate 115200 */
+	tty_termios_encode_baud_rate(termios, 115200, 115200);
+}
+
+static void _hso_serial_set_termios(struct tty_struct *tty)
+{
+	struct hso_serial *serial = tty->driver_data;
+
+	if (!serial) {
+		pr_err("%s: no tty structures", __func__);
+		return;
+	}
+
+	hso_dbg(0x8, "port %d\n", serial->minor);
+
+	/*
+	 *	Fix up unsupported bits
+	 */
+	tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
+
+	tty->termios.c_cflag &=
+		~(CSIZE		/* no size */
+		| PARENB	/* disable parity bit */
+		| CBAUD		/* clear current baud rate */
+		| CBAUDEX);	/* clear current buad rate */
+
+	tty->termios.c_cflag |= CS8;	/* character size 8 bits */
+
+	/* baud rate 115200 */
+	tty_encode_baud_rate(tty, 115200, 115200);
+}
+
+static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
+{
+	int result;
+	/* We are done with this URB, resubmit it. Prep the USB to wait for
+	 * another frame */
+	usb_fill_bulk_urb(urb, serial->parent->usb,
+			  usb_rcvbulkpipe(serial->parent->usb,
+					  serial->in_endp->
+					  bEndpointAddress & 0x7F),
+			  urb->transfer_buffer, serial->rx_data_length,
+			  hso_std_serial_read_bulk_callback, serial);
+	/* Give this to the USB subsystem so it can tell us when more data
+	 * arrives. */
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result) {
+		dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
+			__func__, result);
+	}
+}
+
+
+
+
+static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
+{
+	int count;
+	struct urb *curr_urb;
+
+	while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
+		curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
+		count = put_rxbuf_data(curr_urb, serial);
+		if (count == -1)
+			return;
+		if (count == 0) {
+			serial->curr_rx_urb_idx++;
+			if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
+				serial->curr_rx_urb_idx = 0;
+			hso_resubmit_rx_bulk_urb(serial, curr_urb);
+		}
+	}
+}
+
+static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
+{
+	int count = 0;
+	struct urb *urb;
+
+	urb = serial->rx_urb[0];
+	if (serial->port.count > 0) {
+		count = put_rxbuf_data(urb, serial);
+		if (count == -1)
+			return;
+	}
+	/* Re issue a read as long as we receive data. */
+
+	if (count == 0 && ((urb->actual_length != 0) ||
+			   (serial->rx_state == RX_PENDING))) {
+		serial->rx_state = RX_SENT;
+		hso_mux_serial_read(serial);
+	} else
+		serial->rx_state = RX_IDLE;
+}
+
+
+/* read callback for Diag and CS port */
+static void hso_std_serial_read_bulk_callback(struct urb *urb)
+{
+	struct hso_serial *serial = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	hso_dbg(0x8, "--- Got serial_read_bulk callback %02x ---\n", status);
+
+	/* sanity check */
+	if (!serial) {
+		hso_dbg(0x1, "serial == NULL\n");
+		return;
+	}
+	if (status) {
+		handle_usb_error(status, __func__, serial->parent);
+		return;
+	}
+
+	hso_dbg(0x1, "Actual length = %d\n", urb->actual_length);
+	DUMP1(urb->transfer_buffer, urb->actual_length);
+
+	/* Anyone listening? */
+	if (serial->port.count == 0)
+		return;
+
+	if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
+		fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
+	/* Valid data, handle RX data */
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
+	put_rxbuf_data_and_resubmit_bulk_urb(serial);
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+}
+
+/*
+ * This needs to be a tasklet otherwise we will
+ * end up recursively calling this function.
+ */
+static void hso_unthrottle_tasklet(struct tasklet_struct *t)
+{
+	struct hso_serial *serial = from_tasklet(serial, t,
+						 unthrottle_tasklet);
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	if ((serial->parent->port_spec & HSO_INTF_MUX))
+		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
+	else
+		put_rxbuf_data_and_resubmit_bulk_urb(serial);
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+}
+
+static	void hso_unthrottle(struct tty_struct *tty)
+{
+	struct hso_serial *serial = tty->driver_data;
+
+	tasklet_hi_schedule(&serial->unthrottle_tasklet);
+}
+
+/* open the requested serial port */
+static int hso_serial_open(struct tty_struct *tty, struct file *filp)
+{
+	struct hso_serial *serial = get_serial_by_index(tty->index);
+	int result;
+
+	/* sanity check */
+	if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
+		WARN_ON(1);
+		tty->driver_data = NULL;
+		hso_dbg(0x1, "Failed to open port\n");
+		return -ENODEV;
+	}
+
+	mutex_lock(&serial->parent->mutex);
+	result = usb_autopm_get_interface(serial->parent->interface);
+	if (result < 0)
+		goto err_out;
+
+	hso_dbg(0x1, "Opening %d\n", serial->minor);
+
+	/* setup */
+	tty->driver_data = serial;
+	tty_port_tty_set(&serial->port, tty);
+
+	/* check for port already opened, if not set the termios */
+	serial->port.count++;
+	if (serial->port.count == 1) {
+		serial->rx_state = RX_IDLE;
+		/* Force default termio settings */
+		_hso_serial_set_termios(tty);
+		tasklet_setup(&serial->unthrottle_tasklet,
+			      hso_unthrottle_tasklet);
+		result = hso_start_serial_device(serial->parent, GFP_KERNEL);
+		if (result) {
+			hso_stop_serial_device(serial->parent);
+			serial->port.count--;
+		} else {
+			kref_get(&serial->parent->ref);
+		}
+	} else {
+		hso_dbg(0x1, "Port was already open\n");
+	}
+
+	usb_autopm_put_interface(serial->parent->interface);
+
+	/* done */
+	if (result)
+		hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0);
+err_out:
+	mutex_unlock(&serial->parent->mutex);
+	return result;
+}
+
+/* close the requested serial port */
+static void hso_serial_close(struct tty_struct *tty, struct file *filp)
+{
+	struct hso_serial *serial = tty->driver_data;
+	u8 usb_gone;
+
+	hso_dbg(0x1, "Closing serial port\n");
+
+	/* Open failed, no close cleanup required */
+	if (serial == NULL)
+		return;
+
+	mutex_lock(&serial->parent->mutex);
+	usb_gone = serial->parent->usb_gone;
+
+	if (!usb_gone)
+		usb_autopm_get_interface(serial->parent->interface);
+
+	/* reset the rts and dtr */
+	/* do the actual close */
+	serial->port.count--;
+
+	if (serial->port.count <= 0) {
+		serial->port.count = 0;
+		tty_port_tty_set(&serial->port, NULL);
+		if (!usb_gone)
+			hso_stop_serial_device(serial->parent);
+		tasklet_kill(&serial->unthrottle_tasklet);
+	}
+
+	if (!usb_gone)
+		usb_autopm_put_interface(serial->parent->interface);
+
+	mutex_unlock(&serial->parent->mutex);
+}
+
+/* close the requested serial port */
+static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
+			    int count)
+{
+	struct hso_serial *serial = tty->driver_data;
+	int space, tx_bytes;
+	unsigned long flags;
+
+	/* sanity check */
+	if (serial == NULL) {
+		pr_err("%s: serial is NULL\n", __func__);
+		return -ENODEV;
+	}
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+
+	space = serial->tx_data_length - serial->tx_buffer_count;
+	tx_bytes = (count < space) ? count : space;
+
+	if (!tx_bytes)
+		goto out;
+
+	memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
+	serial->tx_buffer_count += tx_bytes;
+
+out:
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	hso_kick_transmit(serial);
+	/* done */
+	return tx_bytes;
+}
+
+/* how much room is there for writing */
+static unsigned int hso_serial_write_room(struct tty_struct *tty)
+{
+	struct hso_serial *serial = tty->driver_data;
+	unsigned int room;
+	unsigned long flags;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	room = serial->tx_data_length - serial->tx_buffer_count;
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	/* return free room */
+	return room;
+}
+
+static void hso_serial_cleanup(struct tty_struct *tty)
+{
+	struct hso_serial *serial = tty->driver_data;
+
+	if (!serial)
+		return;
+
+	kref_put(&serial->parent->ref, hso_serial_ref_free);
+}
+
+/* setup the term */
+static void hso_serial_set_termios(struct tty_struct *tty,
+				   const struct ktermios *old)
+{
+	struct hso_serial *serial = tty->driver_data;
+	unsigned long flags;
+
+	if (old)
+		hso_dbg(0x16, "Termios called with: cflags new[%u] - old[%u]\n",
+			(unsigned int)tty->termios.c_cflag,
+			(unsigned int)old->c_cflag);
+
+	/* the actual setup */
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	if (serial->port.count)
+		_hso_serial_set_termios(tty);
+	else
+		tty->termios = *old;
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	/* done */
+}
+
+/* how many characters in the buffer */
+static unsigned int hso_serial_chars_in_buffer(struct tty_struct *tty)
+{
+	struct hso_serial *serial = tty->driver_data;
+	unsigned long flags;
+	unsigned int chars;
+
+	/* sanity check */
+	if (serial == NULL)
+		return 0;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	chars = serial->tx_buffer_count;
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	return chars;
+}
+static int tiocmget_submit_urb(struct hso_serial *serial,
+			       struct hso_tiocmget *tiocmget,
+			       struct usb_device *usb)
+{
+	int result;
+
+	if (serial->parent->usb_gone)
+		return -ENODEV;
+	usb_fill_int_urb(tiocmget->urb, usb,
+			 usb_rcvintpipe(usb,
+					tiocmget->endp->
+					bEndpointAddress & 0x7F),
+			 tiocmget->serial_state_notification,
+			 sizeof(struct hso_serial_state_notification),
+			 tiocmget_intr_callback, serial,
+			 tiocmget->endp->bInterval);
+	result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
+	if (result) {
+		dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
+			 result);
+	}
+	return result;
+
+}
+
+static void tiocmget_intr_callback(struct urb *urb)
+{
+	struct hso_serial *serial = urb->context;
+	struct hso_tiocmget *tiocmget;
+	int status = urb->status;
+	u16 UART_state_bitmap, prev_UART_state_bitmap;
+	struct uart_icount *icount;
+	struct hso_serial_state_notification *serial_state_notification;
+	struct usb_device *usb;
+	struct usb_interface *interface;
+	int if_num;
+
+	/* Sanity checks */
+	if (!serial)
+		return;
+	if (status) {
+		handle_usb_error(status, __func__, serial->parent);
+		return;
+	}
+
+	/* tiocmget is only supported on HSO_PORT_MODEM */
+	tiocmget = serial->tiocmget;
+	if (!tiocmget)
+		return;
+	BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
+
+	usb = serial->parent->usb;
+	interface = serial->parent->interface;
+
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	/* wIndex should be the USB interface number of the port to which the
+	 * notification applies, which should always be the Modem port.
+	 */
+	serial_state_notification = tiocmget->serial_state_notification;
+	if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
+	    serial_state_notification->bNotification != B_NOTIFICATION ||
+	    le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
+	    le16_to_cpu(serial_state_notification->wIndex) != if_num ||
+	    le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
+		dev_warn(&usb->dev,
+			 "hso received invalid serial state notification\n");
+		DUMP(serial_state_notification,
+		     sizeof(struct hso_serial_state_notification));
+	} else {
+		unsigned long flags;
+
+		UART_state_bitmap = le16_to_cpu(serial_state_notification->
+						UART_state_bitmap);
+		prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
+		icount = &tiocmget->icount;
+		spin_lock_irqsave(&serial->serial_lock, flags);
+		if ((UART_state_bitmap & B_OVERRUN) !=
+		   (prev_UART_state_bitmap & B_OVERRUN))
+			icount->parity++;
+		if ((UART_state_bitmap & B_PARITY) !=
+		   (prev_UART_state_bitmap & B_PARITY))
+			icount->parity++;
+		if ((UART_state_bitmap & B_FRAMING) !=
+		   (prev_UART_state_bitmap & B_FRAMING))
+			icount->frame++;
+		if ((UART_state_bitmap & B_RING_SIGNAL) &&
+		   !(prev_UART_state_bitmap & B_RING_SIGNAL))
+			icount->rng++;
+		if ((UART_state_bitmap & B_BREAK) !=
+		   (prev_UART_state_bitmap & B_BREAK))
+			icount->brk++;
+		if ((UART_state_bitmap & B_TX_CARRIER) !=
+		   (prev_UART_state_bitmap & B_TX_CARRIER))
+			icount->dsr++;
+		if ((UART_state_bitmap & B_RX_CARRIER) !=
+		   (prev_UART_state_bitmap & B_RX_CARRIER))
+			icount->dcd++;
+		tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
+		spin_unlock_irqrestore(&serial->serial_lock, flags);
+		tiocmget->intr_completed = 1;
+		wake_up_interruptible(&tiocmget->waitq);
+	}
+	memset(serial_state_notification, 0,
+	       sizeof(struct hso_serial_state_notification));
+	tiocmget_submit_urb(serial,
+			    tiocmget,
+			    serial->parent->usb);
+}
+
+/*
+ * next few functions largely stolen from drivers/serial/serial_core.c
+ */
+/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+static int
+hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	struct uart_icount cprev, cnow;
+	struct hso_tiocmget  *tiocmget;
+	int ret;
+
+	tiocmget = serial->tiocmget;
+	if (!tiocmget)
+		return -ENOENT;
+	/*
+	 * note the counters on entry
+	 */
+	spin_lock_irq(&serial->serial_lock);
+	memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
+	spin_unlock_irq(&serial->serial_lock);
+	add_wait_queue(&tiocmget->waitq, &wait);
+	for (;;) {
+		spin_lock_irq(&serial->serial_lock);
+		memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
+		spin_unlock_irq(&serial->serial_lock);
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+		    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+		    ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd))) {
+			ret = 0;
+			break;
+		}
+		schedule();
+		/* see if a signal did it */
+		if (signal_pending(current)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
+		cprev = cnow;
+	}
+	__set_current_state(TASK_RUNNING);
+	remove_wait_queue(&tiocmget->waitq, &wait);
+
+	return ret;
+}
+
+/*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ *     RI where only 0->1 is counted.
+ */
+static int hso_get_count(struct tty_struct *tty,
+		  struct serial_icounter_struct *icount)
+{
+	struct uart_icount cnow;
+	struct hso_serial *serial = tty->driver_data;
+	struct hso_tiocmget  *tiocmget = serial->tiocmget;
+
+	memset(icount, 0, sizeof(struct serial_icounter_struct));
+
+	if (!tiocmget)
+		 return -ENOENT;
+	spin_lock_irq(&serial->serial_lock);
+	memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
+	spin_unlock_irq(&serial->serial_lock);
+
+	icount->cts         = cnow.cts;
+	icount->dsr         = cnow.dsr;
+	icount->rng         = cnow.rng;
+	icount->dcd         = cnow.dcd;
+	icount->rx          = cnow.rx;
+	icount->tx          = cnow.tx;
+	icount->frame       = cnow.frame;
+	icount->overrun     = cnow.overrun;
+	icount->parity      = cnow.parity;
+	icount->brk         = cnow.brk;
+	icount->buf_overrun = cnow.buf_overrun;
+
+	return 0;
+}
+
+
+static int hso_serial_tiocmget(struct tty_struct *tty)
+{
+	int retval;
+	struct hso_serial *serial = tty->driver_data;
+	struct hso_tiocmget  *tiocmget;
+	u16 UART_state_bitmap;
+
+	/* sanity check */
+	if (!serial) {
+		hso_dbg(0x1, "no tty structures\n");
+		return -EINVAL;
+	}
+	spin_lock_irq(&serial->serial_lock);
+	retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
+	    ((serial->dtr_state) ? TIOCM_DTR : 0);
+	tiocmget = serial->tiocmget;
+	if (tiocmget) {
+
+		UART_state_bitmap = le16_to_cpu(
+			tiocmget->prev_UART_state_bitmap);
+		if (UART_state_bitmap & B_RING_SIGNAL)
+			retval |=  TIOCM_RNG;
+		if (UART_state_bitmap & B_RX_CARRIER)
+			retval |=  TIOCM_CD;
+		if (UART_state_bitmap & B_TX_CARRIER)
+			retval |=  TIOCM_DSR;
+	}
+	spin_unlock_irq(&serial->serial_lock);
+	return retval;
+}
+
+static int hso_serial_tiocmset(struct tty_struct *tty,
+			       unsigned int set, unsigned int clear)
+{
+	int val = 0;
+	unsigned long flags;
+	int if_num;
+	struct hso_serial *serial = tty->driver_data;
+	struct usb_interface *interface;
+
+	/* sanity check */
+	if (!serial) {
+		hso_dbg(0x1, "no tty structures\n");
+		return -EINVAL;
+	}
+
+	if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
+		return -EINVAL;
+
+	interface = serial->parent->interface;
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	if (set & TIOCM_RTS)
+		serial->rts_state = 1;
+	if (set & TIOCM_DTR)
+		serial->dtr_state = 1;
+
+	if (clear & TIOCM_RTS)
+		serial->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		serial->dtr_state = 0;
+
+	if (serial->dtr_state)
+		val |= 0x01;
+	if (serial->rts_state)
+		val |= 0x02;
+
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+
+	return usb_control_msg(serial->parent->usb,
+			       usb_sndctrlpipe(serial->parent->usb, 0), 0x22,
+			       0x21, val, if_num, NULL, 0,
+			       USB_CTRL_SET_TIMEOUT);
+}
+
+static int hso_serial_ioctl(struct tty_struct *tty,
+			    unsigned int cmd, unsigned long arg)
+{
+	struct hso_serial *serial = tty->driver_data;
+	int ret = 0;
+	hso_dbg(0x8, "IOCTL cmd: %d, arg: %ld\n", cmd, arg);
+
+	if (!serial)
+		return -ENODEV;
+	switch (cmd) {
+	case TIOCMIWAIT:
+		ret = hso_wait_modem_status(serial, arg);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+	return ret;
+}
+
+
+/* starts a transmit */
+static void hso_kick_transmit(struct hso_serial *serial)
+{
+	unsigned long flags;
+	int res;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	if (!serial->tx_buffer_count)
+		goto out;
+
+	if (serial->tx_urb_used)
+		goto out;
+
+	/* Wakeup USB interface if necessary */
+	if (hso_get_activity(serial->parent) == -EAGAIN)
+		goto out;
+
+	/* Switch pointers around to avoid memcpy */
+	swap(serial->tx_buffer, serial->tx_data);
+	serial->tx_data_count = serial->tx_buffer_count;
+	serial->tx_buffer_count = 0;
+
+	/* If serial->tx_data is set, it means we switched buffers */
+	if (serial->tx_data && serial->write_data) {
+		res = serial->write_data(serial);
+		if (res >= 0)
+			serial->tx_urb_used = 1;
+	}
+out:
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+}
+
+/* make a request (for reading and writing data to muxed serial port) */
+static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
+			      struct urb *ctrl_urb,
+			      struct usb_ctrlrequest *ctrl_req,
+			      u8 *ctrl_urb_data, u32 size)
+{
+	int result;
+	int pipe;
+
+	/* Sanity check */
+	if (!serial || !ctrl_urb || !ctrl_req) {
+		pr_err("%s: Wrong arguments\n", __func__);
+		return -EINVAL;
+	}
+
+	/* initialize */
+	ctrl_req->wValue = 0;
+	ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
+	ctrl_req->wLength = cpu_to_le16(size);
+
+	if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
+		/* Reading command */
+		ctrl_req->bRequestType = USB_DIR_IN |
+					 USB_TYPE_OPTION_VENDOR |
+					 USB_RECIP_INTERFACE;
+		ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+		pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
+	} else {
+		/* Writing command */
+		ctrl_req->bRequestType = USB_DIR_OUT |
+					 USB_TYPE_OPTION_VENDOR |
+					 USB_RECIP_INTERFACE;
+		ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+		pipe = usb_sndctrlpipe(serial->parent->usb, 0);
+	}
+	/* syslog */
+	hso_dbg(0x2, "%s command (%02x) len: %d, port: %d\n",
+		type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
+		ctrl_req->bRequestType, ctrl_req->wLength, port);
+
+	/* Load ctrl urb */
+	ctrl_urb->transfer_flags = 0;
+	usb_fill_control_urb(ctrl_urb,
+			     serial->parent->usb,
+			     pipe,
+			     (u8 *) ctrl_req,
+			     ctrl_urb_data, size, ctrl_callback, serial);
+	/* Send it on merry way */
+	result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
+	if (result) {
+		dev_err(&ctrl_urb->dev->dev,
+			"%s failed submit ctrl_urb %d type %d\n", __func__,
+			result, type);
+		return result;
+	}
+
+	/* done */
+	return size;
+}
+
+/* called by intr_callback when read occurs */
+static int hso_mux_serial_read(struct hso_serial *serial)
+{
+	if (!serial)
+		return -EINVAL;
+
+	/* clean data */
+	memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
+	/* make the request */
+
+	if (serial->num_rx_urbs != 1) {
+		dev_err(&serial->parent->interface->dev,
+			"ERROR: mux'd reads with multiple buffers "
+			"not possible\n");
+		return 0;
+	}
+	return mux_device_request(serial,
+				  USB_CDC_GET_ENCAPSULATED_RESPONSE,
+				  serial->parent->port_spec & HSO_PORT_MASK,
+				  serial->rx_urb[0],
+				  &serial->ctrl_req_rx,
+				  serial->rx_data[0], serial->rx_data_length);
+}
+
+/* used for muxed serial port callback (muxed serial read) */
+static void intr_callback(struct urb *urb)
+{
+	struct hso_shared_int *shared_int = urb->context;
+	struct hso_serial *serial;
+	unsigned char *port_req;
+	int status = urb->status;
+	unsigned long flags;
+	int i;
+
+	usb_mark_last_busy(urb->dev);
+
+	/* sanity check */
+	if (!shared_int)
+		return;
+
+	/* status check */
+	if (status) {
+		handle_usb_error(status, __func__, NULL);
+		return;
+	}
+	hso_dbg(0x8, "--- Got intr callback 0x%02X ---\n", status);
+
+	/* what request? */
+	port_req = urb->transfer_buffer;
+	hso_dbg(0x8, "port_req = 0x%.2X\n", *port_req);
+	/* loop over all muxed ports to find the one sending this */
+	for (i = 0; i < 8; i++) {
+		/* max 8 channels on MUX */
+		if (*port_req & (1 << i)) {
+			serial = get_serial_by_shared_int_and_type(shared_int,
+								   (1 << i));
+			if (serial != NULL) {
+				hso_dbg(0x1, "Pending read interrupt on port %d\n",
+					i);
+				spin_lock_irqsave(&serial->serial_lock, flags);
+				if (serial->rx_state == RX_IDLE &&
+					serial->port.count > 0) {
+					/* Setup and send a ctrl req read on
+					 * port i */
+					if (!serial->rx_urb_filled[0]) {
+						serial->rx_state = RX_SENT;
+						hso_mux_serial_read(serial);
+					} else
+						serial->rx_state = RX_PENDING;
+				} else {
+					hso_dbg(0x1, "Already a read pending on port %d or port not open\n",
+						i);
+				}
+				spin_unlock_irqrestore(&serial->serial_lock,
+						       flags);
+			}
+		}
+	}
+	/* Resubmit interrupt urb */
+	hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
+}
+
+/* called for writing to muxed serial port */
+static int hso_mux_serial_write_data(struct hso_serial *serial)
+{
+	if (NULL == serial)
+		return -EINVAL;
+
+	return mux_device_request(serial,
+				  USB_CDC_SEND_ENCAPSULATED_COMMAND,
+				  serial->parent->port_spec & HSO_PORT_MASK,
+				  serial->tx_urb,
+				  &serial->ctrl_req_tx,
+				  serial->tx_data, serial->tx_data_count);
+}
+
+/* write callback for Diag and CS port */
+static void hso_std_serial_write_bulk_callback(struct urb *urb)
+{
+	struct hso_serial *serial = urb->context;
+	int status = urb->status;
+	unsigned long flags;
+
+	/* sanity check */
+	if (!serial) {
+		hso_dbg(0x1, "serial == NULL\n");
+		return;
+	}
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	serial->tx_urb_used = 0;
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+	if (status) {
+		handle_usb_error(status, __func__, serial->parent);
+		return;
+	}
+	hso_put_activity(serial->parent);
+	tty_port_tty_wakeup(&serial->port);
+	hso_kick_transmit(serial);
+
+	hso_dbg(0x1, "\n");
+}
+
+/* called for writing diag or CS serial port */
+static int hso_std_serial_write_data(struct hso_serial *serial)
+{
+	int count = serial->tx_data_count;
+	int result;
+
+	usb_fill_bulk_urb(serial->tx_urb,
+			  serial->parent->usb,
+			  usb_sndbulkpipe(serial->parent->usb,
+					  serial->out_endp->
+					  bEndpointAddress & 0x7F),
+			  serial->tx_data, serial->tx_data_count,
+			  hso_std_serial_write_bulk_callback, serial);
+
+	result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
+	if (result) {
+		dev_warn(&serial->parent->usb->dev,
+			 "Failed to submit urb - res %d\n", result);
+		return result;
+	}
+
+	return count;
+}
+
+/* callback after read or write on muxed serial port */
+static void ctrl_callback(struct urb *urb)
+{
+	struct hso_serial *serial = urb->context;
+	struct usb_ctrlrequest *req;
+	int status = urb->status;
+	unsigned long flags;
+
+	/* sanity check */
+	if (!serial)
+		return;
+
+	spin_lock_irqsave(&serial->serial_lock, flags);
+	serial->tx_urb_used = 0;
+	spin_unlock_irqrestore(&serial->serial_lock, flags);
+	if (status) {
+		handle_usb_error(status, __func__, serial->parent);
+		return;
+	}
+
+	/* what request? */
+	req = (struct usb_ctrlrequest *)(urb->setup_packet);
+	hso_dbg(0x8, "--- Got muxed ctrl callback 0x%02X ---\n", status);
+	hso_dbg(0x8, "Actual length of urb = %d\n", urb->actual_length);
+	DUMP1(urb->transfer_buffer, urb->actual_length);
+
+	if (req->bRequestType ==
+	    (USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
+		/* response to a read command */
+		serial->rx_urb_filled[0] = 1;
+		spin_lock_irqsave(&serial->serial_lock, flags);
+		put_rxbuf_data_and_resubmit_ctrl_urb(serial);
+		spin_unlock_irqrestore(&serial->serial_lock, flags);
+	} else {
+		hso_put_activity(serial->parent);
+		tty_port_tty_wakeup(&serial->port);
+		/* response to a write command */
+		hso_kick_transmit(serial);
+	}
+}
+
+/* handle RX data for serial port */
+static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
+{
+	struct tty_struct *tty;
+	int count;
+
+	/* Sanity check */
+	if (urb == NULL || serial == NULL) {
+		hso_dbg(0x1, "serial = NULL\n");
+		return -2;
+	}
+
+	tty = tty_port_tty_get(&serial->port);
+
+	if (tty && tty_throttled(tty)) {
+		tty_kref_put(tty);
+		return -1;
+	}
+
+	/* Push data to tty */
+	hso_dbg(0x1, "data to push to tty\n");
+	count = tty_buffer_request_room(&serial->port, urb->actual_length);
+	if (count >= urb->actual_length) {
+		tty_insert_flip_string(&serial->port, urb->transfer_buffer,
+				       urb->actual_length);
+		tty_flip_buffer_push(&serial->port);
+	} else {
+		dev_warn(&serial->parent->usb->dev,
+			 "dropping data, %d bytes lost\n", urb->actual_length);
+	}
+
+	tty_kref_put(tty);
+
+	serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
+
+	return 0;
+}
+
+
+/* Base driver functions */
+
+static void hso_log_port(struct hso_device *hso_dev)
+{
+	char *port_type;
+	char port_dev[20];
+
+	switch (hso_dev->port_spec & HSO_PORT_MASK) {
+	case HSO_PORT_CONTROL:
+		port_type = "Control";
+		break;
+	case HSO_PORT_APP:
+		port_type = "Application";
+		break;
+	case HSO_PORT_GPS:
+		port_type = "GPS";
+		break;
+	case HSO_PORT_GPS_CONTROL:
+		port_type = "GPS control";
+		break;
+	case HSO_PORT_APP2:
+		port_type = "Application2";
+		break;
+	case HSO_PORT_PCSC:
+		port_type = "PCSC";
+		break;
+	case HSO_PORT_DIAG:
+		port_type = "Diagnostic";
+		break;
+	case HSO_PORT_DIAG2:
+		port_type = "Diagnostic2";
+		break;
+	case HSO_PORT_MODEM:
+		port_type = "Modem";
+		break;
+	case HSO_PORT_NETWORK:
+		port_type = "Network";
+		break;
+	default:
+		port_type = "Unknown";
+		break;
+	}
+	if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+		sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
+	} else
+		sprintf(port_dev, "/dev/%s%d", tty_filename,
+			dev2ser(hso_dev)->minor);
+
+	dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
+		port_type, port_dev);
+}
+
+static int hso_start_net_device(struct hso_device *hso_dev)
+{
+	int i, result = 0;
+	struct hso_net *hso_net = dev2net(hso_dev);
+
+	if (!hso_net)
+		return -ENODEV;
+
+	/* send URBs for all read buffers */
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+
+		/* Prep a receive URB */
+		usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
+				  hso_dev->usb,
+				  usb_rcvbulkpipe(hso_dev->usb,
+						  hso_net->in_endp->
+						  bEndpointAddress & 0x7F),
+				  hso_net->mux_bulk_rx_buf_pool[i],
+				  MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
+				  hso_net);
+
+		/* Put it out there so the device can send us stuff */
+		result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
+					GFP_NOIO);
+		if (result)
+			dev_warn(&hso_dev->usb->dev,
+				"%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
+				i, result);
+	}
+
+	return result;
+}
+
+static int hso_stop_net_device(struct hso_device *hso_dev)
+{
+	int i;
+	struct hso_net *hso_net = dev2net(hso_dev);
+
+	if (!hso_net)
+		return -ENODEV;
+
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+		if (hso_net->mux_bulk_rx_urb_pool[i])
+			usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
+
+	}
+	if (hso_net->mux_bulk_tx_urb)
+		usb_kill_urb(hso_net->mux_bulk_tx_urb);
+
+	return 0;
+}
+
+static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
+{
+	int i, result = 0;
+	struct hso_serial *serial = dev2ser(hso_dev);
+
+	if (!serial)
+		return -ENODEV;
+
+	/* If it is not the MUX port fill in and submit a bulk urb (already
+	 * allocated in hso_serial_start) */
+	if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
+		for (i = 0; i < serial->num_rx_urbs; i++) {
+			usb_fill_bulk_urb(serial->rx_urb[i],
+					  serial->parent->usb,
+					  usb_rcvbulkpipe(serial->parent->usb,
+							  serial->in_endp->
+							  bEndpointAddress &
+							  0x7F),
+					  serial->rx_data[i],
+					  serial->rx_data_length,
+					  hso_std_serial_read_bulk_callback,
+					  serial);
+			result = usb_submit_urb(serial->rx_urb[i], flags);
+			if (result) {
+				dev_warn(&serial->parent->usb->dev,
+					 "Failed to submit urb - res %d\n",
+					 result);
+				break;
+			}
+		}
+	} else {
+		mutex_lock(&serial->shared_int->shared_int_lock);
+		if (!serial->shared_int->use_count) {
+			result =
+			    hso_mux_submit_intr_urb(serial->shared_int,
+						    hso_dev->usb, flags);
+		}
+		serial->shared_int->use_count++;
+		mutex_unlock(&serial->shared_int->shared_int_lock);
+	}
+	if (serial->tiocmget)
+		tiocmget_submit_urb(serial,
+				    serial->tiocmget,
+				    serial->parent->usb);
+	return result;
+}
+
+static int hso_stop_serial_device(struct hso_device *hso_dev)
+{
+	int i;
+	struct hso_serial *serial = dev2ser(hso_dev);
+	struct hso_tiocmget  *tiocmget;
+
+	if (!serial)
+		return -ENODEV;
+
+	for (i = 0; i < serial->num_rx_urbs; i++) {
+		if (serial->rx_urb[i]) {
+			usb_kill_urb(serial->rx_urb[i]);
+			serial->rx_urb_filled[i] = 0;
+		}
+	}
+	serial->curr_rx_urb_idx = 0;
+
+	if (serial->tx_urb)
+		usb_kill_urb(serial->tx_urb);
+
+	if (serial->shared_int) {
+		mutex_lock(&serial->shared_int->shared_int_lock);
+		if (serial->shared_int->use_count &&
+		    (--serial->shared_int->use_count == 0)) {
+			struct urb *urb;
+
+			urb = serial->shared_int->shared_intr_urb;
+			if (urb)
+				usb_kill_urb(urb);
+		}
+		mutex_unlock(&serial->shared_int->shared_int_lock);
+	}
+	tiocmget = serial->tiocmget;
+	if (tiocmget) {
+		wake_up_interruptible(&tiocmget->waitq);
+		usb_kill_urb(tiocmget->urb);
+	}
+
+	return 0;
+}
+
+static void hso_serial_tty_unregister(struct hso_serial *serial)
+{
+	tty_unregister_device(tty_drv, serial->minor);
+	release_minor(serial);
+}
+
+static void hso_serial_common_free(struct hso_serial *serial)
+{
+	int i;
+
+	for (i = 0; i < serial->num_rx_urbs; i++) {
+		/* unlink and free RX URB */
+		usb_free_urb(serial->rx_urb[i]);
+		/* free the RX buffer */
+		kfree(serial->rx_data[i]);
+	}
+
+	/* unlink and free TX URB */
+	usb_free_urb(serial->tx_urb);
+	kfree(serial->tx_buffer);
+	kfree(serial->tx_data);
+	tty_port_destroy(&serial->port);
+}
+
+static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
+				    int rx_size, int tx_size)
+{
+	int i;
+
+	tty_port_init(&serial->port);
+
+	if (obtain_minor(serial))
+		goto exit2;
+
+	/* register our minor number */
+	serial->parent->dev = tty_port_register_device_attr(&serial->port,
+			tty_drv, serial->minor, &serial->parent->interface->dev,
+			serial->parent, hso_serial_dev_groups);
+	if (IS_ERR(serial->parent->dev)) {
+		release_minor(serial);
+		goto exit2;
+	}
+
+	serial->magic = HSO_SERIAL_MAGIC;
+	spin_lock_init(&serial->serial_lock);
+	serial->num_rx_urbs = num_urbs;
+
+	/* RX, allocate urb and initialize */
+
+	/* prepare our RX buffer */
+	serial->rx_data_length = rx_size;
+	for (i = 0; i < serial->num_rx_urbs; i++) {
+		serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+		if (!serial->rx_urb[i])
+			goto exit;
+		serial->rx_urb[i]->transfer_buffer = NULL;
+		serial->rx_urb[i]->transfer_buffer_length = 0;
+		serial->rx_data[i] = kzalloc(serial->rx_data_length,
+					     GFP_KERNEL);
+		if (!serial->rx_data[i])
+			goto exit;
+	}
+
+	/* TX, allocate urb and initialize */
+	serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!serial->tx_urb)
+		goto exit;
+	serial->tx_urb->transfer_buffer = NULL;
+	serial->tx_urb->transfer_buffer_length = 0;
+	/* prepare our TX buffer */
+	serial->tx_data_count = 0;
+	serial->tx_buffer_count = 0;
+	serial->tx_data_length = tx_size;
+	serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
+	if (!serial->tx_data)
+		goto exit;
+
+	serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
+	if (!serial->tx_buffer)
+		goto exit;
+
+	return 0;
+exit:
+	hso_serial_tty_unregister(serial);
+exit2:
+	hso_serial_common_free(serial);
+	return -1;
+}
+
+/* Creates a general hso device */
+static struct hso_device *hso_create_device(struct usb_interface *intf,
+					    int port_spec)
+{
+	struct hso_device *hso_dev;
+
+	hso_dev = kzalloc(sizeof(*hso_dev), GFP_KERNEL);
+	if (!hso_dev)
+		return NULL;
+
+	hso_dev->port_spec = port_spec;
+	hso_dev->usb = interface_to_usbdev(intf);
+	hso_dev->interface = intf;
+	kref_init(&hso_dev->ref);
+	mutex_init(&hso_dev->mutex);
+
+	INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
+	INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
+
+	return hso_dev;
+}
+
+/* Removes a network device in the network device table */
+static int remove_net_device(struct hso_device *hso_dev)
+{
+	int i;
+
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] == hso_dev) {
+			network_table[i] = NULL;
+			break;
+		}
+	}
+	if (i == HSO_MAX_NET_DEVICES)
+		return -1;
+	return 0;
+}
+
+/* Frees our network device */
+static void hso_free_net_device(struct hso_device *hso_dev)
+{
+	int i;
+	struct hso_net *hso_net = dev2net(hso_dev);
+
+	if (!hso_net)
+		return;
+
+	remove_net_device(hso_net->parent);
+
+	if (hso_net->net)
+		unregister_netdev(hso_net->net);
+
+	/* start freeing */
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+		usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
+		kfree(hso_net->mux_bulk_rx_buf_pool[i]);
+		hso_net->mux_bulk_rx_buf_pool[i] = NULL;
+	}
+	usb_free_urb(hso_net->mux_bulk_tx_urb);
+	kfree(hso_net->mux_bulk_tx_buf);
+	hso_net->mux_bulk_tx_buf = NULL;
+
+	if (hso_net->net)
+		free_netdev(hso_net->net);
+
+	kfree(hso_dev);
+}
+
+static const struct net_device_ops hso_netdev_ops = {
+	.ndo_open	= hso_net_open,
+	.ndo_stop	= hso_net_close,
+	.ndo_start_xmit = hso_net_start_xmit,
+	.ndo_tx_timeout = hso_net_tx_timeout,
+};
+
+/* initialize the network interface */
+static void hso_net_init(struct net_device *net)
+{
+	struct hso_net *hso_net = netdev_priv(net);
+
+	hso_dbg(0x1, "sizeof hso_net is %zu\n", sizeof(*hso_net));
+
+	/* fill in the other fields */
+	net->netdev_ops = &hso_netdev_ops;
+	net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
+	net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
+	net->type = ARPHRD_NONE;
+	net->mtu = DEFAULT_MTU - 14;
+	net->tx_queue_len = 10;
+	net->ethtool_ops = &ops;
+
+	/* and initialize the semaphore */
+	spin_lock_init(&hso_net->net_lock);
+}
+
+/* Adds a network device in the network device table */
+static int add_net_device(struct hso_device *hso_dev)
+{
+	int i;
+
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] == NULL) {
+			network_table[i] = hso_dev;
+			break;
+		}
+	}
+	if (i == HSO_MAX_NET_DEVICES)
+		return -1;
+	return 0;
+}
+
+static int hso_rfkill_set_block(void *data, bool blocked)
+{
+	struct hso_device *hso_dev = data;
+	int enabled = !blocked;
+	int rv;
+
+	mutex_lock(&hso_dev->mutex);
+	if (hso_dev->usb_gone)
+		rv = 0;
+	else
+		rv = usb_control_msg(hso_dev->usb, usb_sndctrlpipe(hso_dev->usb, 0),
+				       enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
+				       USB_CTRL_SET_TIMEOUT);
+	mutex_unlock(&hso_dev->mutex);
+	return rv;
+}
+
+static const struct rfkill_ops hso_rfkill_ops = {
+	.set_block = hso_rfkill_set_block,
+};
+
+/* Creates and sets up everything for rfkill */
+static void hso_create_rfkill(struct hso_device *hso_dev,
+			     struct usb_interface *interface)
+{
+	struct hso_net *hso_net = dev2net(hso_dev);
+	struct device *dev = &hso_net->net->dev;
+	static u32 rfkill_counter;
+
+	snprintf(hso_net->name, sizeof(hso_net->name), "hso-%d",
+		 rfkill_counter++);
+
+	hso_net->rfkill = rfkill_alloc(hso_net->name,
+				       &interface_to_usbdev(interface)->dev,
+				       RFKILL_TYPE_WWAN,
+				       &hso_rfkill_ops, hso_dev);
+	if (!hso_net->rfkill)
+		return;
+
+	if (rfkill_register(hso_net->rfkill) < 0) {
+		rfkill_destroy(hso_net->rfkill);
+		hso_net->rfkill = NULL;
+		dev_err(dev, "%s - Failed to register rfkill\n", __func__);
+		return;
+	}
+}
+
+static struct device_type hso_type = {
+	.name	= "wwan",
+};
+
+/* Creates our network device */
+static struct hso_device *hso_create_net_device(struct usb_interface *interface,
+						int port_spec)
+{
+	int result, i;
+	struct net_device *net;
+	struct hso_net *hso_net;
+	struct hso_device *hso_dev;
+
+	hso_dev = hso_create_device(interface, port_spec);
+	if (!hso_dev)
+		return NULL;
+
+	/* allocate our network device, then we can put in our private data */
+	/* call hso_net_init to do the basic initialization */
+	net = alloc_netdev(sizeof(struct hso_net), "hso%d", NET_NAME_UNKNOWN,
+			   hso_net_init);
+	if (!net) {
+		dev_err(&interface->dev, "Unable to create ethernet device\n");
+		goto err_hso_dev;
+	}
+
+	hso_net = netdev_priv(net);
+
+	hso_dev->port_data.dev_net = hso_net;
+	hso_net->net = net;
+	hso_net->parent = hso_dev;
+
+	hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
+				      USB_DIR_IN);
+	if (!hso_net->in_endp) {
+		dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
+		goto err_net;
+	}
+	hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
+				       USB_DIR_OUT);
+	if (!hso_net->out_endp) {
+		dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
+		goto err_net;
+	}
+	SET_NETDEV_DEV(net, &interface->dev);
+	SET_NETDEV_DEVTYPE(net, &hso_type);
+
+	/* start allocating */
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+		hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
+		if (!hso_net->mux_bulk_rx_urb_pool[i])
+			goto err_mux_bulk_rx;
+		hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
+							   GFP_KERNEL);
+		if (!hso_net->mux_bulk_rx_buf_pool[i])
+			goto err_mux_bulk_rx;
+	}
+	hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!hso_net->mux_bulk_tx_urb)
+		goto err_mux_bulk_rx;
+	hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
+	if (!hso_net->mux_bulk_tx_buf)
+		goto err_free_tx_urb;
+
+	result = add_net_device(hso_dev);
+	if (result) {
+		dev_err(&interface->dev, "Failed to add net device\n");
+		goto err_free_tx_buf;
+	}
+
+	/* registering our net device */
+	result = register_netdev(net);
+	if (result) {
+		dev_err(&interface->dev, "Failed to register device\n");
+		goto err_rmv_ndev;
+	}
+
+	hso_log_port(hso_dev);
+
+	hso_create_rfkill(hso_dev, interface);
+
+	return hso_dev;
+
+err_rmv_ndev:
+	remove_net_device(hso_dev);
+err_free_tx_buf:
+	kfree(hso_net->mux_bulk_tx_buf);
+err_free_tx_urb:
+	usb_free_urb(hso_net->mux_bulk_tx_urb);
+err_mux_bulk_rx:
+	for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
+		usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
+		kfree(hso_net->mux_bulk_rx_buf_pool[i]);
+	}
+err_net:
+	free_netdev(net);
+err_hso_dev:
+	kfree(hso_dev);
+	return NULL;
+}
+
+static void hso_free_tiomget(struct hso_serial *serial)
+{
+	struct hso_tiocmget *tiocmget;
+	if (!serial)
+		return;
+	tiocmget = serial->tiocmget;
+	if (tiocmget) {
+		usb_free_urb(tiocmget->urb);
+		tiocmget->urb = NULL;
+		serial->tiocmget = NULL;
+		kfree(tiocmget->serial_state_notification);
+		tiocmget->serial_state_notification = NULL;
+		kfree(tiocmget);
+	}
+}
+
+/* Frees an AT channel ( goes for both mux and non-mux ) */
+static void hso_free_serial_device(struct hso_device *hso_dev)
+{
+	struct hso_serial *serial = dev2ser(hso_dev);
+
+	if (!serial)
+		return;
+
+	hso_serial_common_free(serial);
+
+	if (serial->shared_int) {
+		mutex_lock(&serial->shared_int->shared_int_lock);
+		if (--serial->shared_int->ref_count == 0)
+			hso_free_shared_int(serial->shared_int);
+		else
+			mutex_unlock(&serial->shared_int->shared_int_lock);
+	}
+	hso_free_tiomget(serial);
+	kfree(serial);
+	kfree(hso_dev);
+}
+
+/* Creates a bulk AT channel */
+static struct hso_device *hso_create_bulk_serial_device(
+			struct usb_interface *interface, int port)
+{
+	struct hso_device *hso_dev;
+	struct hso_serial *serial;
+	int num_urbs;
+	struct hso_tiocmget *tiocmget;
+
+	hso_dev = hso_create_device(interface, port);
+	if (!hso_dev)
+		return NULL;
+
+	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
+	if (!serial)
+		goto exit;
+
+	serial->parent = hso_dev;
+	hso_dev->port_data.dev_serial = serial;
+
+	if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
+		num_urbs = 2;
+		serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
+					   GFP_KERNEL);
+		if (!serial->tiocmget)
+			goto exit;
+		serial->tiocmget->serial_state_notification
+			= kzalloc(sizeof(struct hso_serial_state_notification),
+					   GFP_KERNEL);
+		if (!serial->tiocmget->serial_state_notification)
+			goto exit;
+		tiocmget = serial->tiocmget;
+		tiocmget->endp = hso_get_ep(interface,
+					    USB_ENDPOINT_XFER_INT,
+					    USB_DIR_IN);
+		if (!tiocmget->endp) {
+			dev_err(&interface->dev, "Failed to find INT IN ep\n");
+			goto exit;
+		}
+
+		tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!tiocmget->urb)
+			goto exit;
+
+		mutex_init(&tiocmget->mutex);
+		init_waitqueue_head(&tiocmget->waitq);
+	} else {
+		num_urbs = 1;
+	}
+
+	if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
+				     BULK_URB_TX_SIZE))
+		goto exit;
+
+	serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
+				     USB_DIR_IN);
+	if (!serial->in_endp) {
+		dev_err(&interface->dev, "Failed to find BULK IN ep\n");
+		goto exit2;
+	}
+
+	if (!
+	    (serial->out_endp =
+	     hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
+		dev_err(&interface->dev, "Failed to find BULK OUT ep\n");
+		goto exit2;
+	}
+
+	serial->write_data = hso_std_serial_write_data;
+
+	/* setup the proc dirs and files if needed */
+	hso_log_port(hso_dev);
+
+	/* done, return it */
+	return hso_dev;
+
+exit2:
+	hso_serial_tty_unregister(serial);
+	hso_serial_common_free(serial);
+exit:
+	hso_free_tiomget(serial);
+	kfree(serial);
+	kfree(hso_dev);
+	return NULL;
+}
+
+/* Creates a multiplexed AT channel */
+static
+struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
+						int port,
+						struct hso_shared_int *mux)
+{
+	struct hso_device *hso_dev;
+	struct hso_serial *serial;
+	int port_spec;
+
+	port_spec = HSO_INTF_MUX;
+	port_spec &= ~HSO_PORT_MASK;
+
+	port_spec |= hso_mux_to_port(port);
+	if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
+		return NULL;
+
+	hso_dev = hso_create_device(interface, port_spec);
+	if (!hso_dev)
+		return NULL;
+
+	serial = kzalloc(sizeof(*serial), GFP_KERNEL);
+	if (!serial)
+		goto err_free_dev;
+
+	hso_dev->port_data.dev_serial = serial;
+	serial->parent = hso_dev;
+
+	if (hso_serial_common_create
+	    (serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
+		goto err_free_serial;
+
+	serial->tx_data_length--;
+	serial->write_data = hso_mux_serial_write_data;
+
+	serial->shared_int = mux;
+	mutex_lock(&serial->shared_int->shared_int_lock);
+	serial->shared_int->ref_count++;
+	mutex_unlock(&serial->shared_int->shared_int_lock);
+
+	/* setup the proc dirs and files if needed */
+	hso_log_port(hso_dev);
+
+	/* done, return it */
+	return hso_dev;
+
+err_free_serial:
+	kfree(serial);
+err_free_dev:
+	kfree(hso_dev);
+	return NULL;
+
+}
+
+static void hso_free_shared_int(struct hso_shared_int *mux)
+{
+	usb_free_urb(mux->shared_intr_urb);
+	kfree(mux->shared_intr_buf);
+	mutex_unlock(&mux->shared_int_lock);
+	kfree(mux);
+}
+
+static
+struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
+{
+	struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+
+	if (!mux)
+		return NULL;
+
+	mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
+				    USB_DIR_IN);
+	if (!mux->intr_endp) {
+		dev_err(&interface->dev, "Can't find INT IN endpoint\n");
+		goto exit;
+	}
+
+	mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!mux->shared_intr_urb)
+		goto exit;
+	mux->shared_intr_buf =
+		kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
+			GFP_KERNEL);
+	if (!mux->shared_intr_buf)
+		goto exit;
+
+	mutex_init(&mux->shared_int_lock);
+
+	return mux;
+
+exit:
+	kfree(mux->shared_intr_buf);
+	usb_free_urb(mux->shared_intr_urb);
+	kfree(mux);
+	return NULL;
+}
+
+/* Gets the port spec for a certain interface */
+static int hso_get_config_data(struct usb_interface *interface)
+{
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+	u8 *config_data = kmalloc(17, GFP_KERNEL);
+	u32 if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+	s32 result;
+
+	if (!config_data)
+		return -ENOMEM;
+	if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
+			    0x86, 0xC0, 0, 0, config_data, 17,
+			    USB_CTRL_SET_TIMEOUT) != 0x11) {
+		kfree(config_data);
+		return -EIO;
+	}
+
+	/* check if we have a valid interface */
+	if (if_num > 16) {
+		kfree(config_data);
+		return -EINVAL;
+	}
+
+	switch (config_data[if_num]) {
+	case 0x0:
+		result = 0;
+		break;
+	case 0x1:
+		result = HSO_PORT_DIAG;
+		break;
+	case 0x2:
+		result = HSO_PORT_GPS;
+		break;
+	case 0x3:
+		result = HSO_PORT_GPS_CONTROL;
+		break;
+	case 0x4:
+		result = HSO_PORT_APP;
+		break;
+	case 0x5:
+		result = HSO_PORT_APP2;
+		break;
+	case 0x6:
+		result = HSO_PORT_CONTROL;
+		break;
+	case 0x7:
+		result = HSO_PORT_NETWORK;
+		break;
+	case 0x8:
+		result = HSO_PORT_MODEM;
+		break;
+	case 0x9:
+		result = HSO_PORT_MSD;
+		break;
+	case 0xa:
+		result = HSO_PORT_PCSC;
+		break;
+	case 0xb:
+		result = HSO_PORT_VOICE;
+		break;
+	default:
+		result = 0;
+	}
+
+	if (result)
+		result |= HSO_INTF_BULK;
+
+	if (config_data[16] & 0x1)
+		result |= HSO_INFO_CRC_BUG;
+
+	kfree(config_data);
+	return result;
+}
+
+/* called once for each interface upon device insertion */
+static int hso_probe(struct usb_interface *interface,
+		     const struct usb_device_id *id)
+{
+	int mux, i, if_num, port_spec;
+	unsigned char port_mask;
+	struct hso_device *hso_dev = NULL;
+	struct hso_shared_int *shared_int;
+	struct hso_device *tmp_dev = NULL;
+
+	if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
+		dev_err(&interface->dev, "Not our interface\n");
+		return -ENODEV;
+	}
+
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
+
+	/* Get the interface/port specification from either driver_info or from
+	 * the device itself */
+	if (id->driver_info) {
+		/* if_num is controlled by the device, driver_info is a 0 terminated
+		 * array. Make sure, the access is in bounds! */
+		for (i = 0; i <= if_num; ++i)
+			if (((u32 *)(id->driver_info))[i] == 0)
+				goto exit;
+		port_spec = ((u32 *)(id->driver_info))[if_num];
+	} else {
+		port_spec = hso_get_config_data(interface);
+		if (port_spec < 0)
+			goto exit;
+	}
+
+	/* Check if we need to switch to alt interfaces prior to port
+	 * configuration */
+	if (interface->num_altsetting > 1)
+		usb_set_interface(interface_to_usbdev(interface), if_num, 1);
+	interface->needs_remote_wakeup = 1;
+
+	/* Allocate new hso device(s) */
+	switch (port_spec & HSO_INTF_MASK) {
+	case HSO_INTF_MUX:
+		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+			/* Create the network device */
+			if (!disable_net) {
+				hso_dev = hso_create_net_device(interface,
+								port_spec);
+				if (!hso_dev)
+					goto exit;
+				tmp_dev = hso_dev;
+			}
+		}
+
+		if (hso_get_mux_ports(interface, &port_mask))
+			/* TODO: de-allocate everything */
+			goto exit;
+
+		shared_int = hso_create_shared_int(interface);
+		if (!shared_int)
+			goto exit;
+
+		for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
+			if (port_mask & i) {
+				hso_dev = hso_create_mux_serial_device(
+						interface, i, shared_int);
+				if (!hso_dev)
+					goto exit;
+			}
+		}
+
+		if (tmp_dev)
+			hso_dev = tmp_dev;
+		break;
+
+	case HSO_INTF_BULK:
+		/* It's a regular bulk interface */
+		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+			if (!disable_net)
+				hso_dev =
+				    hso_create_net_device(interface, port_spec);
+		} else {
+			hso_dev =
+			    hso_create_bulk_serial_device(interface, port_spec);
+		}
+		if (!hso_dev)
+			goto exit;
+		break;
+	default:
+		goto exit;
+	}
+
+	/* save our data pointer in this device */
+	usb_set_intfdata(interface, hso_dev);
+
+	/* done */
+	return 0;
+exit:
+	hso_free_interface(interface);
+	return -ENODEV;
+}
+
+/* device removed, cleaning up */
+static void hso_disconnect(struct usb_interface *interface)
+{
+	hso_free_interface(interface);
+
+	/* remove reference of our private data */
+	usb_set_intfdata(interface, NULL);
+}
+
+static void async_get_intf(struct work_struct *data)
+{
+	struct hso_device *hso_dev =
+	    container_of(data, struct hso_device, async_get_intf);
+	usb_autopm_get_interface(hso_dev->interface);
+}
+
+static void async_put_intf(struct work_struct *data)
+{
+	struct hso_device *hso_dev =
+	    container_of(data, struct hso_device, async_put_intf);
+	usb_autopm_put_interface(hso_dev->interface);
+}
+
+static int hso_get_activity(struct hso_device *hso_dev)
+{
+	if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
+		if (!hso_dev->is_active) {
+			hso_dev->is_active = 1;
+			schedule_work(&hso_dev->async_get_intf);
+		}
+	}
+
+	if (hso_dev->usb->state != USB_STATE_CONFIGURED)
+		return -EAGAIN;
+
+	usb_mark_last_busy(hso_dev->usb);
+
+	return 0;
+}
+
+static int hso_put_activity(struct hso_device *hso_dev)
+{
+	if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
+		if (hso_dev->is_active) {
+			hso_dev->is_active = 0;
+			schedule_work(&hso_dev->async_put_intf);
+			return -EAGAIN;
+		}
+	}
+	hso_dev->is_active = 0;
+	return 0;
+}
+
+/* called by kernel when we need to suspend device */
+static int hso_suspend(struct usb_interface *iface, pm_message_t message)
+{
+	int i, result;
+
+	/* Stop all serial ports */
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+		if (serial_table[i] && (serial_table[i]->interface == iface)) {
+			result = hso_stop_serial_device(serial_table[i]);
+			if (result)
+				goto out;
+		}
+	}
+
+	/* Stop all network ports */
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] &&
+		    (network_table[i]->interface == iface)) {
+			result = hso_stop_net_device(network_table[i]);
+			if (result)
+				goto out;
+		}
+	}
+
+out:
+	return 0;
+}
+
+/* called by kernel when we need to resume device */
+static int hso_resume(struct usb_interface *iface)
+{
+	int i, result = 0;
+	struct hso_net *hso_net;
+
+	/* Start all serial ports */
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+		if (serial_table[i] && (serial_table[i]->interface == iface)) {
+			if (dev2ser(serial_table[i])->port.count) {
+				result =
+				    hso_start_serial_device(serial_table[i], GFP_NOIO);
+				hso_kick_transmit(dev2ser(serial_table[i]));
+				if (result)
+					goto out;
+			}
+		}
+	}
+
+	/* Start all network ports */
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] &&
+		    (network_table[i]->interface == iface)) {
+			hso_net = dev2net(network_table[i]);
+			if (hso_net->flags & IFF_UP) {
+				/* First transmit any lingering data,
+				   then restart the device. */
+				if (hso_net->skb_tx_buf) {
+					dev_dbg(&iface->dev,
+						"Transmitting"
+						" lingering data\n");
+					hso_net_start_xmit(hso_net->skb_tx_buf,
+							   hso_net->net);
+					hso_net->skb_tx_buf = NULL;
+				}
+				result = hso_start_net_device(network_table[i]);
+				if (result)
+					goto out;
+			}
+		}
+	}
+
+out:
+	return result;
+}
+
+static void hso_serial_ref_free(struct kref *ref)
+{
+	struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
+
+	hso_free_serial_device(hso_dev);
+}
+
+static void hso_free_interface(struct usb_interface *interface)
+{
+	struct hso_serial *serial;
+	int i;
+
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
+		if (serial_table[i] &&
+		    (serial_table[i]->interface == interface)) {
+			serial = dev2ser(serial_table[i]);
+			tty_port_tty_hangup(&serial->port, false);
+			mutex_lock(&serial->parent->mutex);
+			serial->parent->usb_gone = 1;
+			mutex_unlock(&serial->parent->mutex);
+			cancel_work_sync(&serial_table[i]->async_put_intf);
+			cancel_work_sync(&serial_table[i]->async_get_intf);
+			hso_serial_tty_unregister(serial);
+			kref_put(&serial->parent->ref, hso_serial_ref_free);
+		}
+	}
+
+	for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
+		if (network_table[i] &&
+		    (network_table[i]->interface == interface)) {
+			struct rfkill *rfk = dev2net(network_table[i])->rfkill;
+			/* hso_stop_net_device doesn't stop the net queue since
+			 * traffic needs to start it again when suspended */
+			netif_stop_queue(dev2net(network_table[i])->net);
+			hso_stop_net_device(network_table[i]);
+			cancel_work_sync(&network_table[i]->async_put_intf);
+			cancel_work_sync(&network_table[i]->async_get_intf);
+			if (rfk) {
+				rfkill_unregister(rfk);
+				rfkill_destroy(rfk);
+			}
+			hso_free_net_device(network_table[i]);
+		}
+	}
+}
+
+/* Helper functions */
+
+/* Get the endpoint ! */
+static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
+						  int type, int dir)
+{
+	int i;
+	struct usb_host_interface *iface = intf->cur_altsetting;
+	struct usb_endpoint_descriptor *endp;
+
+	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+		endp = &iface->endpoint[i].desc;
+		if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
+		    (usb_endpoint_type(endp) == type))
+			return endp;
+	}
+
+	return NULL;
+}
+
+/* Get the byte that describes which ports are enabled */
+static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
+{
+	int i;
+	struct usb_host_interface *iface = intf->cur_altsetting;
+
+	if (iface->extralen == 3) {
+		*ports = iface->extra[2];
+		return 0;
+	}
+
+	for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+		if (iface->endpoint[i].extralen == 3) {
+			*ports = iface->endpoint[i].extra[2];
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+/* interrupt urb needs to be submitted, used for serial read of muxed port */
+static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
+				   struct usb_device *usb, gfp_t gfp)
+{
+	int result;
+
+	usb_fill_int_urb(shared_int->shared_intr_urb, usb,
+			 usb_rcvintpipe(usb,
+				shared_int->intr_endp->bEndpointAddress & 0x7F),
+			 shared_int->shared_intr_buf,
+			 1,
+			 intr_callback, shared_int,
+			 shared_int->intr_endp->bInterval);
+
+	result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
+	if (result)
+		dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
+			result);
+
+	return result;
+}
+
+/* operations setup of the serial interface */
+static const struct tty_operations hso_serial_ops = {
+	.open = hso_serial_open,
+	.close = hso_serial_close,
+	.write = hso_serial_write,
+	.write_room = hso_serial_write_room,
+	.cleanup = hso_serial_cleanup,
+	.ioctl = hso_serial_ioctl,
+	.set_termios = hso_serial_set_termios,
+	.chars_in_buffer = hso_serial_chars_in_buffer,
+	.tiocmget = hso_serial_tiocmget,
+	.tiocmset = hso_serial_tiocmset,
+	.get_icount = hso_get_count,
+	.unthrottle = hso_unthrottle
+};
+
+static struct usb_driver hso_driver = {
+	.name = driver_name,
+	.probe = hso_probe,
+	.disconnect = hso_disconnect,
+	.id_table = hso_ids,
+	.suspend = hso_suspend,
+	.resume = hso_resume,
+	.reset_resume = hso_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+static int __init hso_init(void)
+{
+	int i;
+	int result;
+
+	/* put it in the log */
+	pr_info("%s\n", version);
+
+	/* Initialise the serial table semaphore and table */
+	for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
+		serial_table[i] = NULL;
+
+	/* allocate our driver using the proper amount of supported minors */
+	tty_drv = tty_alloc_driver(HSO_SERIAL_TTY_MINORS, TTY_DRIVER_REAL_RAW |
+			TTY_DRIVER_DYNAMIC_DEV);
+	if (IS_ERR(tty_drv))
+		return PTR_ERR(tty_drv);
+
+	/* fill in all needed values */
+	tty_drv->driver_name = driver_name;
+	tty_drv->name = tty_filename;
+
+	/* if major number is provided as parameter, use that one */
+	if (tty_major)
+		tty_drv->major = tty_major;
+
+	tty_drv->minor_start = 0;
+	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
+	tty_drv->subtype = SERIAL_TYPE_NORMAL;
+	tty_drv->init_termios = tty_std_termios;
+	hso_init_termios(&tty_drv->init_termios);
+	tty_set_operations(tty_drv, &hso_serial_ops);
+
+	/* register the tty driver */
+	result = tty_register_driver(tty_drv);
+	if (result) {
+		pr_err("%s - tty_register_driver failed(%d)\n",
+		       __func__, result);
+		goto err_free_tty;
+	}
+
+	/* register this module as an usb driver */
+	result = usb_register(&hso_driver);
+	if (result) {
+		pr_err("Could not register hso driver - error: %d\n", result);
+		goto err_unreg_tty;
+	}
+
+	/* done */
+	return 0;
+err_unreg_tty:
+	tty_unregister_driver(tty_drv);
+err_free_tty:
+	tty_driver_kref_put(tty_drv);
+	return result;
+}
+
+static void __exit hso_exit(void)
+{
+	pr_info("unloaded\n");
+
+	tty_unregister_driver(tty_drv);
+	/* deregister the usb driver */
+	usb_deregister(&hso_driver);
+	tty_driver_kref_put(tty_drv);
+}
+
+/* Module definitions */
+module_init(hso_init);
+module_exit(hso_exit);
+
+MODULE_AUTHOR(MOD_AUTHOR);
+MODULE_DESCRIPTION(MOD_DESCRIPTION);
+MODULE_LICENSE("GPL");
+
+/* change the debug level (eg: insmod hso.ko debug=0x04) */
+MODULE_PARM_DESC(debug, "debug level mask [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
+module_param(debug, int, 0644);
+
+/* set the major tty number (eg: insmod hso.ko tty_major=245) */
+MODULE_PARM_DESC(tty_major, "Set the major tty number");
+module_param(tty_major, int, 0644);
+
+/* disable network interface (eg: insmod hso.ko disable_net=1) */
+MODULE_PARM_DESC(disable_net, "Disable the network interface");
+module_param(disable_net, int, 0644);
diff --git a/drivers/net/usb/huawei_cdc_ncm.c b/drivers/net/usb/huawei_cdc_ncm.c
new file mode 100644
index 000000000..849b77330
--- /dev/null
+++ b/drivers/net/usb/huawei_cdc_ncm.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* huawei_cdc_ncm.c - handles Huawei devices using the CDC NCM protocol as
+ * transport layer.
+ * Copyright (C) 2013	 Enrico Mioso <mrkiko.rs@gmail.com>
+ *
+ * ABSTRACT:
+ * This driver handles devices resembling the CDC NCM standard, but
+ * encapsulating another protocol inside it. An example are some Huawei 3G
+ * devices, exposing an embedded AT channel where you can set up the NCM
+ * connection.
+ * This code has been heavily inspired by the cdc_mbim.c driver, which is
+ * Copyright (c) 2012  Smith Micro Software, Inc.
+ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc-wdm.h>
+#include <linux/usb/cdc_ncm.h>
+
+/* Driver data */
+struct huawei_cdc_ncm_state {
+	struct cdc_ncm_ctx *ctx;
+	atomic_t pmcount;
+	struct usb_driver *subdriver;
+	struct usb_interface *control;
+	struct usb_interface *data;
+};
+
+static int huawei_cdc_ncm_manage_power(struct usbnet *usbnet_dev, int on)
+{
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	int rv;
+
+	if ((on && atomic_add_return(1, &drvstate->pmcount) == 1) ||
+			(!on && atomic_dec_and_test(&drvstate->pmcount))) {
+		rv = usb_autopm_get_interface(usbnet_dev->intf);
+		usbnet_dev->intf->needs_remote_wakeup = on;
+		if (!rv)
+			usb_autopm_put_interface(usbnet_dev->intf);
+	}
+	return 0;
+}
+
+static int huawei_cdc_ncm_wdm_manage_power(struct usb_interface *intf,
+					   int status)
+{
+	struct usbnet *usbnet_dev = usb_get_intfdata(intf);
+
+	/* can be called while disconnecting */
+	if (!usbnet_dev)
+		return 0;
+
+	return huawei_cdc_ncm_manage_power(usbnet_dev, status);
+}
+
+
+static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev,
+			       struct usb_interface *intf)
+{
+	struct cdc_ncm_ctx *ctx;
+	struct usb_driver *subdriver = ERR_PTR(-ENODEV);
+	int ret;
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	int drvflags = 0;
+
+	/* altsetting should always be 1 for NCM devices - so we hard-coded
+	 * it here. Some huawei devices will need the NDP part of the NCM package to
+	 * be at the end of the frame.
+	 */
+	drvflags |= CDC_NCM_FLAG_NDP_TO_END;
+
+	/* For many Huawei devices the NTB32 mode is the default and the best mode
+	 * they work with. Huawei E5785 and E5885 devices refuse to work in NTB16 mode at all.
+	 */
+	drvflags |= CDC_NCM_FLAG_PREFER_NTB32;
+
+	ret = cdc_ncm_bind_common(usbnet_dev, intf, 1, drvflags);
+	if (ret)
+		goto err;
+
+	ctx = drvstate->ctx;
+
+	if (usbnet_dev->status)
+		/* The wMaxCommand buffer must be big enough to hold
+		 * any message from the modem. Experience has shown
+		 * that some replies are more than 256 bytes long
+		 */
+		subdriver = usb_cdc_wdm_register(ctx->control,
+						 &usbnet_dev->status->desc,
+						 1024, /* wMaxCommand */
+						 WWAN_PORT_AT,
+						 huawei_cdc_ncm_wdm_manage_power);
+	if (IS_ERR(subdriver)) {
+		ret = PTR_ERR(subdriver);
+		cdc_ncm_unbind(usbnet_dev, intf);
+		goto err;
+	}
+
+	/* Prevent usbnet from using the status descriptor */
+	usbnet_dev->status = NULL;
+
+	drvstate->subdriver = subdriver;
+
+err:
+	return ret;
+}
+
+static void huawei_cdc_ncm_unbind(struct usbnet *usbnet_dev,
+				  struct usb_interface *intf)
+{
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	struct cdc_ncm_ctx *ctx = drvstate->ctx;
+
+	if (drvstate->subdriver && drvstate->subdriver->disconnect)
+		drvstate->subdriver->disconnect(ctx->control);
+	drvstate->subdriver = NULL;
+
+	cdc_ncm_unbind(usbnet_dev, intf);
+}
+
+static int huawei_cdc_ncm_suspend(struct usb_interface *intf,
+				  pm_message_t message)
+{
+	int ret = 0;
+	struct usbnet *usbnet_dev = usb_get_intfdata(intf);
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	struct cdc_ncm_ctx *ctx = drvstate->ctx;
+
+	if (ctx == NULL) {
+		ret = -ENODEV;
+		goto error;
+	}
+
+	ret = usbnet_suspend(intf, message);
+	if (ret < 0)
+		goto error;
+
+	if (intf == ctx->control &&
+		drvstate->subdriver &&
+		drvstate->subdriver->suspend)
+		ret = drvstate->subdriver->suspend(intf, message);
+	if (ret < 0)
+		usbnet_resume(intf);
+
+error:
+	return ret;
+}
+
+static int huawei_cdc_ncm_resume(struct usb_interface *intf)
+{
+	int ret = 0;
+	struct usbnet *usbnet_dev = usb_get_intfdata(intf);
+	struct huawei_cdc_ncm_state *drvstate = (void *)&usbnet_dev->data;
+	bool callsub;
+	struct cdc_ncm_ctx *ctx = drvstate->ctx;
+
+	/* should we call subdriver's resume function? */
+	callsub =
+		(intf == ctx->control &&
+		drvstate->subdriver &&
+		drvstate->subdriver->resume);
+
+	if (callsub)
+		ret = drvstate->subdriver->resume(intf);
+	if (ret < 0)
+		goto err;
+	ret = usbnet_resume(intf);
+	if (ret < 0 && callsub)
+		drvstate->subdriver->suspend(intf, PMSG_SUSPEND);
+err:
+	return ret;
+}
+
+static const struct driver_info huawei_cdc_ncm_info = {
+	.description = "Huawei CDC NCM device",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
+	.bind = huawei_cdc_ncm_bind,
+	.unbind = huawei_cdc_ncm_unbind,
+	.manage_power = huawei_cdc_ncm_manage_power,
+	.rx_fixup = cdc_ncm_rx_fixup,
+	.tx_fixup = cdc_ncm_tx_fixup,
+};
+
+static const struct usb_device_id huawei_cdc_ncm_devs[] = {
+	/* Huawei NCM devices disguised as vendor specific */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x16),
+	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
+	},
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46),
+	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
+	},
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x76),
+	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
+	},
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x03, 0x16),
+	  .driver_info = (unsigned long)&huawei_cdc_ncm_info,
+	},
+
+	/* Terminating entry */
+	{
+	},
+};
+MODULE_DEVICE_TABLE(usb, huawei_cdc_ncm_devs);
+
+static struct usb_driver huawei_cdc_ncm_driver = {
+	.name = "huawei_cdc_ncm",
+	.id_table = huawei_cdc_ncm_devs,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = huawei_cdc_ncm_suspend,
+	.resume = huawei_cdc_ncm_resume,
+	.reset_resume = huawei_cdc_ncm_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+module_usb_driver(huawei_cdc_ncm_driver);
+MODULE_AUTHOR("Enrico Mioso <mrkiko.rs@gmail.com>");
+MODULE_DESCRIPTION("USB CDC NCM host driver with encapsulated protocol support");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/int51x1.c b/drivers/net/usb/int51x1.c
new file mode 100644
index 000000000..6fde41550
--- /dev/null
+++ b/drivers/net/usb/int51x1.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2009 Peter Holik
+ *
+ * Intellon usb PLC (Powerline Communications) usb net driver
+ *
+ * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf
+ *
+ * Based on the work of Jan 'RedBully' Seiffert
+ */
+
+/*
+ */
+
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/slab.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+#define INT51X1_VENDOR_ID	0x09e1
+#define INT51X1_PRODUCT_ID	0x5121
+
+#define INT51X1_HEADER_SIZE	2	/* 2 byte header */
+
+#define PACKET_TYPE_PROMISCUOUS		(1 << 0)
+#define PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */
+#define PACKET_TYPE_DIRECTED		(1 << 2)
+#define PACKET_TYPE_BROADCAST		(1 << 3)
+#define PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */
+
+#define SET_ETHERNET_PACKET_FILTER	0x43
+
+static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int len;
+
+	if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) {
+		netdev_err(dev->net, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]);
+
+	skb_trim(skb, len);
+
+	return 1;
+}
+
+static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev,
+		struct sk_buff *skb, gfp_t flags)
+{
+	int pack_len = skb->len;
+	int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	int need_tail = 0;
+	__le16 *len;
+
+	/* if packet and our header is smaller than 64 pad to 64 (+ ZLP) */
+	if ((pack_with_header_len) < dev->maxpacket)
+		need_tail = dev->maxpacket - pack_with_header_len + 1;
+	/*
+	 * usbnet would send a ZLP if packetlength mod urbsize == 0 for us,
+	 * but we need to know ourself, because this would add to the length
+	 * we send down to the device...
+	 */
+	else if (!(pack_with_header_len % dev->maxpacket))
+		need_tail = 1;
+
+	if (!skb_cloned(skb) &&
+			(headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) {
+		if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) {
+			skb->data = memmove(skb->head + INT51X1_HEADER_SIZE,
+					skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb,
+				INT51X1_HEADER_SIZE,
+				need_tail,
+				flags);
+		dev_kfree_skb_any(skb);
+		if (!skb2)
+			return NULL;
+		skb = skb2;
+	}
+
+	pack_len += need_tail;
+	pack_len &= 0x07ff;
+
+	len = __skb_push(skb, INT51X1_HEADER_SIZE);
+	*len = cpu_to_le16(pack_len);
+
+	if(need_tail)
+		__skb_put_zero(skb, need_tail);
+
+	return skb;
+}
+
+static void int51x1_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* do not expect to see traffic of other PLCs */
+		filter |= PACKET_TYPE_PROMISCUOUS;
+		netdev_info(dev->net, "promiscuous mode enabled\n");
+	} else if (!netdev_mc_empty(netdev) ||
+		  (netdev->flags & IFF_ALLMULTI)) {
+		filter |= PACKET_TYPE_ALL_MULTICAST;
+		netdev_dbg(dev->net, "receive all multicast enabled\n");
+	} else {
+		/* ~PROMISCUOUS, ~MULTICAST */
+		netdev_dbg(dev->net, "receive own packets only\n");
+	}
+
+	usbnet_write_cmd_async(dev, SET_ETHERNET_PACKET_FILTER,
+			       USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			       filter, 0, NULL, 0);
+}
+
+static const struct net_device_ops int51x1_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_rx_mode	= int51x1_set_multicast,
+};
+
+static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = usbnet_get_ethernet_addr(dev, 3);
+
+	if (status)
+		return status;
+
+	dev->net->hard_header_len += INT51X1_HEADER_SIZE;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	dev->net->netdev_ops = &int51x1_netdev_ops;
+
+	return usbnet_get_endpoints(dev, intf);
+}
+
+static const struct driver_info int51x1_info = {
+	.description = "Intellon usb powerline adapter",
+	.bind        = int51x1_bind,
+	.rx_fixup    = int51x1_rx_fixup,
+	.tx_fixup    = int51x1_tx_fixup,
+	.in          = 1,
+	.out         = 2,
+	.flags       = FLAG_ETHER,
+};
+
+static const struct usb_device_id products[] = {
+	{
+	USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID),
+		.driver_info = (unsigned long) &int51x1_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver int51x1_driver = {
+	.name       = "int51x1",
+	.id_table   = products,
+	.probe      = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend    = usbnet_suspend,
+	.resume     = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(int51x1_driver);
+
+MODULE_AUTHOR("Peter Holik");
+MODULE_DESCRIPTION("Intellon usb powerline adapter");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
new file mode 100644
index 000000000..6a769df0b
--- /dev/null
+++ b/drivers/net/usb/ipheth.c
@@ -0,0 +1,548 @@
+/*
+ * ipheth.c - Apple iPhone USB Ethernet driver
+ *
+ * Copyright (c) 2009 Diego Giagio <diego@giagio.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of GIAGIO.COM nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ *
+ * Attention: iPhone device must be paired, otherwise it won't respond to our
+ * driver. For more info: http://giagio.com/wiki/moin.cgi/iPhoneEthernetDriver
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+
+#define USB_VENDOR_APPLE        0x05ac
+
+#define IPHETH_USBINTF_CLASS    255
+#define IPHETH_USBINTF_SUBCLASS 253
+#define IPHETH_USBINTF_PROTO    1
+
+#define IPHETH_BUF_SIZE         1514
+#define IPHETH_IP_ALIGN		2	/* padding at front of URB */
+#define IPHETH_TX_TIMEOUT       (5 * HZ)
+
+#define IPHETH_INTFNUM          2
+#define IPHETH_ALT_INTFNUM      1
+
+#define IPHETH_CTRL_ENDP        0x00
+#define IPHETH_CTRL_BUF_SIZE    0x40
+#define IPHETH_CTRL_TIMEOUT     (5 * HZ)
+
+#define IPHETH_CMD_GET_MACADDR   0x00
+#define IPHETH_CMD_CARRIER_CHECK 0x45
+
+#define IPHETH_CARRIER_CHECK_TIMEOUT round_jiffies_relative(1 * HZ)
+#define IPHETH_CARRIER_ON       0x04
+
+static const struct usb_device_id ipheth_table[] = {
+	{ USB_VENDOR_AND_INTERFACE_INFO(USB_VENDOR_APPLE, IPHETH_USBINTF_CLASS,
+					IPHETH_USBINTF_SUBCLASS,
+					IPHETH_USBINTF_PROTO) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, ipheth_table);
+
+struct ipheth_device {
+	struct usb_device *udev;
+	struct usb_interface *intf;
+	struct net_device *net;
+	struct urb *tx_urb;
+	struct urb *rx_urb;
+	unsigned char *tx_buf;
+	unsigned char *rx_buf;
+	unsigned char *ctrl_buf;
+	u8 bulk_in;
+	u8 bulk_out;
+	struct delayed_work carrier_work;
+	bool confirmed_pairing;
+};
+
+static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags);
+
+static int ipheth_alloc_urbs(struct ipheth_device *iphone)
+{
+	struct urb *tx_urb = NULL;
+	struct urb *rx_urb = NULL;
+	u8 *tx_buf = NULL;
+	u8 *rx_buf = NULL;
+
+	tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (tx_urb == NULL)
+		goto error_nomem;
+
+	rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (rx_urb == NULL)
+		goto free_tx_urb;
+
+	tx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE,
+				    GFP_KERNEL, &tx_urb->transfer_dma);
+	if (tx_buf == NULL)
+		goto free_rx_urb;
+
+	rx_buf = usb_alloc_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
+				    GFP_KERNEL, &rx_urb->transfer_dma);
+	if (rx_buf == NULL)
+		goto free_tx_buf;
+
+
+	iphone->tx_urb = tx_urb;
+	iphone->rx_urb = rx_urb;
+	iphone->tx_buf = tx_buf;
+	iphone->rx_buf = rx_buf;
+	return 0;
+
+free_tx_buf:
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, tx_buf,
+			  tx_urb->transfer_dma);
+free_rx_urb:
+	usb_free_urb(rx_urb);
+free_tx_urb:
+	usb_free_urb(tx_urb);
+error_nomem:
+	return -ENOMEM;
+}
+
+static void ipheth_free_urbs(struct ipheth_device *iphone)
+{
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN, iphone->rx_buf,
+			  iphone->rx_urb->transfer_dma);
+	usb_free_coherent(iphone->udev, IPHETH_BUF_SIZE, iphone->tx_buf,
+			  iphone->tx_urb->transfer_dma);
+	usb_free_urb(iphone->rx_urb);
+	usb_free_urb(iphone->tx_urb);
+}
+
+static void ipheth_kill_urbs(struct ipheth_device *dev)
+{
+	usb_kill_urb(dev->tx_urb);
+	usb_kill_urb(dev->rx_urb);
+}
+
+static void ipheth_rcvbulk_callback(struct urb *urb)
+{
+	struct ipheth_device *dev;
+	struct sk_buff *skb;
+	int status;
+	char *buf;
+	int len;
+
+	dev = urb->context;
+	if (dev == NULL)
+		return;
+
+	status = urb->status;
+	switch (status) {
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+	case -EPROTO:
+		return;
+	case 0:
+		break;
+	default:
+		dev_err(&dev->intf->dev, "%s: urb status: %d\n",
+			__func__, status);
+		return;
+	}
+
+	if (urb->actual_length <= IPHETH_IP_ALIGN) {
+		dev->net->stats.rx_length_errors++;
+		return;
+	}
+	len = urb->actual_length - IPHETH_IP_ALIGN;
+	buf = urb->transfer_buffer + IPHETH_IP_ALIGN;
+
+	skb = dev_alloc_skb(len);
+	if (!skb) {
+		dev_err(&dev->intf->dev, "%s: dev_alloc_skb: -ENOMEM\n",
+			__func__);
+		dev->net->stats.rx_dropped++;
+		return;
+	}
+
+	skb_put_data(skb, buf, len);
+	skb->dev = dev->net;
+	skb->protocol = eth_type_trans(skb, dev->net);
+
+	dev->net->stats.rx_packets++;
+	dev->net->stats.rx_bytes += len;
+	dev->confirmed_pairing = true;
+	netif_rx(skb);
+	ipheth_rx_submit(dev, GFP_ATOMIC);
+}
+
+static void ipheth_sndbulk_callback(struct urb *urb)
+{
+	struct ipheth_device *dev;
+	int status = urb->status;
+
+	dev = urb->context;
+	if (dev == NULL)
+		return;
+
+	if (status != 0 &&
+	    status != -ENOENT &&
+	    status != -ECONNRESET &&
+	    status != -ESHUTDOWN)
+		dev_err(&dev->intf->dev, "%s: urb status: %d\n",
+		__func__, status);
+
+	if (status == 0)
+		netif_wake_queue(dev->net);
+	else
+		// on URB error, trigger immediate poll
+		schedule_delayed_work(&dev->carrier_work, 0);
+}
+
+static int ipheth_carrier_set(struct ipheth_device *dev)
+{
+	struct usb_device *udev;
+	int retval;
+
+	if (!dev->confirmed_pairing)
+		return 0;
+
+	udev = dev->udev;
+	retval = usb_control_msg(udev,
+			usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP),
+			IPHETH_CMD_CARRIER_CHECK, /* request */
+			0xc0, /* request type */
+			0x00, /* value */
+			0x02, /* index */
+			dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE,
+			IPHETH_CTRL_TIMEOUT);
+	if (retval < 0) {
+		dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
+			__func__, retval);
+		return retval;
+	}
+
+	if (dev->ctrl_buf[0] == IPHETH_CARRIER_ON) {
+		netif_carrier_on(dev->net);
+		if (dev->tx_urb->status != -EINPROGRESS)
+			netif_wake_queue(dev->net);
+	} else {
+		netif_carrier_off(dev->net);
+		netif_stop_queue(dev->net);
+	}
+	return 0;
+}
+
+static void ipheth_carrier_check_work(struct work_struct *work)
+{
+	struct ipheth_device *dev = container_of(work, struct ipheth_device,
+						 carrier_work.work);
+
+	ipheth_carrier_set(dev);
+	schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT);
+}
+
+static int ipheth_get_macaddr(struct ipheth_device *dev)
+{
+	struct usb_device *udev = dev->udev;
+	struct net_device *net = dev->net;
+	int retval;
+
+	retval = usb_control_msg(udev,
+				 usb_rcvctrlpipe(udev, IPHETH_CTRL_ENDP),
+				 IPHETH_CMD_GET_MACADDR, /* request */
+				 0xc0, /* request type */
+				 0x00, /* value */
+				 0x02, /* index */
+				 dev->ctrl_buf,
+				 IPHETH_CTRL_BUF_SIZE,
+				 IPHETH_CTRL_TIMEOUT);
+	if (retval < 0) {
+		dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
+			__func__, retval);
+	} else if (retval < ETH_ALEN) {
+		dev_err(&dev->intf->dev,
+			"%s: usb_control_msg: short packet: %d bytes\n",
+			__func__, retval);
+		retval = -EINVAL;
+	} else {
+		eth_hw_addr_set(net, dev->ctrl_buf);
+		retval = 0;
+	}
+
+	return retval;
+}
+
+static int ipheth_rx_submit(struct ipheth_device *dev, gfp_t mem_flags)
+{
+	struct usb_device *udev = dev->udev;
+	int retval;
+
+	usb_fill_bulk_urb(dev->rx_urb, udev,
+			  usb_rcvbulkpipe(udev, dev->bulk_in),
+			  dev->rx_buf, IPHETH_BUF_SIZE + IPHETH_IP_ALIGN,
+			  ipheth_rcvbulk_callback,
+			  dev);
+	dev->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	retval = usb_submit_urb(dev->rx_urb, mem_flags);
+	if (retval)
+		dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
+			__func__, retval);
+	return retval;
+}
+
+static int ipheth_open(struct net_device *net)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+	struct usb_device *udev = dev->udev;
+	int retval = 0;
+
+	usb_set_interface(udev, IPHETH_INTFNUM, IPHETH_ALT_INTFNUM);
+
+	retval = ipheth_carrier_set(dev);
+	if (retval)
+		return retval;
+
+	retval = ipheth_rx_submit(dev, GFP_KERNEL);
+	if (retval)
+		return retval;
+
+	schedule_delayed_work(&dev->carrier_work, IPHETH_CARRIER_CHECK_TIMEOUT);
+	return retval;
+}
+
+static int ipheth_close(struct net_device *net)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+
+	cancel_delayed_work_sync(&dev->carrier_work);
+	netif_stop_queue(net);
+	return 0;
+}
+
+static netdev_tx_t ipheth_tx(struct sk_buff *skb, struct net_device *net)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+	struct usb_device *udev = dev->udev;
+	int retval;
+
+	/* Paranoid */
+	if (skb->len > IPHETH_BUF_SIZE) {
+		WARN(1, "%s: skb too large: %d bytes\n", __func__, skb->len);
+		dev->net->stats.tx_dropped++;
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	memcpy(dev->tx_buf, skb->data, skb->len);
+	if (skb->len < IPHETH_BUF_SIZE)
+		memset(dev->tx_buf + skb->len, 0, IPHETH_BUF_SIZE - skb->len);
+
+	usb_fill_bulk_urb(dev->tx_urb, udev,
+			  usb_sndbulkpipe(udev, dev->bulk_out),
+			  dev->tx_buf, IPHETH_BUF_SIZE,
+			  ipheth_sndbulk_callback,
+			  dev);
+	dev->tx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	netif_stop_queue(net);
+	retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC);
+	if (retval) {
+		dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
+			__func__, retval);
+		dev->net->stats.tx_errors++;
+		dev_kfree_skb_any(skb);
+		netif_wake_queue(net);
+	} else {
+		dev->net->stats.tx_packets++;
+		dev->net->stats.tx_bytes += skb->len;
+		dev_consume_skb_any(skb);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static void ipheth_tx_timeout(struct net_device *net, unsigned int txqueue)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+
+	dev_err(&dev->intf->dev, "%s: TX timeout\n", __func__);
+	dev->net->stats.tx_errors++;
+	usb_unlink_urb(dev->tx_urb);
+}
+
+static u32 ipheth_ethtool_op_get_link(struct net_device *net)
+{
+	struct ipheth_device *dev = netdev_priv(net);
+	return netif_carrier_ok(dev->net);
+}
+
+static const struct ethtool_ops ops = {
+	.get_link = ipheth_ethtool_op_get_link
+};
+
+static const struct net_device_ops ipheth_netdev_ops = {
+	.ndo_open = ipheth_open,
+	.ndo_stop = ipheth_close,
+	.ndo_start_xmit = ipheth_tx,
+	.ndo_tx_timeout = ipheth_tx_timeout,
+};
+
+static int ipheth_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usb_host_interface *hintf;
+	struct usb_endpoint_descriptor *endp;
+	struct ipheth_device *dev;
+	struct net_device *netdev;
+	int i;
+	int retval;
+
+	netdev = alloc_etherdev(sizeof(struct ipheth_device));
+	if (!netdev)
+		return -ENOMEM;
+
+	netdev->netdev_ops = &ipheth_netdev_ops;
+	netdev->watchdog_timeo = IPHETH_TX_TIMEOUT;
+	strscpy(netdev->name, "eth%d", sizeof(netdev->name));
+
+	dev = netdev_priv(netdev);
+	dev->udev = udev;
+	dev->net = netdev;
+	dev->intf = intf;
+	dev->confirmed_pairing = false;
+	/* Set up endpoints */
+	hintf = usb_altnum_to_altsetting(intf, IPHETH_ALT_INTFNUM);
+	if (hintf == NULL) {
+		retval = -ENODEV;
+		dev_err(&intf->dev, "Unable to find alternate settings interface\n");
+		goto err_endpoints;
+	}
+
+	for (i = 0; i < hintf->desc.bNumEndpoints; i++) {
+		endp = &hintf->endpoint[i].desc;
+		if (usb_endpoint_is_bulk_in(endp))
+			dev->bulk_in = endp->bEndpointAddress;
+		else if (usb_endpoint_is_bulk_out(endp))
+			dev->bulk_out = endp->bEndpointAddress;
+	}
+	if (!(dev->bulk_in && dev->bulk_out)) {
+		retval = -ENODEV;
+		dev_err(&intf->dev, "Unable to find endpoints\n");
+		goto err_endpoints;
+	}
+
+	dev->ctrl_buf = kmalloc(IPHETH_CTRL_BUF_SIZE, GFP_KERNEL);
+	if (dev->ctrl_buf == NULL) {
+		retval = -ENOMEM;
+		goto err_alloc_ctrl_buf;
+	}
+
+	retval = ipheth_get_macaddr(dev);
+	if (retval)
+		goto err_get_macaddr;
+
+	INIT_DELAYED_WORK(&dev->carrier_work, ipheth_carrier_check_work);
+
+	retval = ipheth_alloc_urbs(dev);
+	if (retval) {
+		dev_err(&intf->dev, "error allocating urbs: %d\n", retval);
+		goto err_alloc_urbs;
+	}
+
+	usb_set_intfdata(intf, dev);
+
+	SET_NETDEV_DEV(netdev, &intf->dev);
+	netdev->ethtool_ops = &ops;
+
+	retval = register_netdev(netdev);
+	if (retval) {
+		dev_err(&intf->dev, "error registering netdev: %d\n", retval);
+		retval = -EIO;
+		goto err_register_netdev;
+	}
+	// carrier down and transmit queues stopped until packet from device
+	netif_carrier_off(netdev);
+	netif_tx_stop_all_queues(netdev);
+	dev_info(&intf->dev, "Apple iPhone USB Ethernet device attached\n");
+	return 0;
+
+err_register_netdev:
+	ipheth_free_urbs(dev);
+err_alloc_urbs:
+err_get_macaddr:
+err_alloc_ctrl_buf:
+	kfree(dev->ctrl_buf);
+err_endpoints:
+	free_netdev(netdev);
+	return retval;
+}
+
+static void ipheth_disconnect(struct usb_interface *intf)
+{
+	struct ipheth_device *dev;
+
+	dev = usb_get_intfdata(intf);
+	if (dev != NULL) {
+		unregister_netdev(dev->net);
+		ipheth_kill_urbs(dev);
+		ipheth_free_urbs(dev);
+		kfree(dev->ctrl_buf);
+		free_netdev(dev->net);
+	}
+	usb_set_intfdata(intf, NULL);
+	dev_info(&intf->dev, "Apple iPhone USB Ethernet now disconnected\n");
+}
+
+static struct usb_driver ipheth_driver = {
+	.name =		"ipheth",
+	.probe =	ipheth_probe,
+	.disconnect =	ipheth_disconnect,
+	.id_table =	ipheth_table,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(ipheth_driver);
+
+MODULE_AUTHOR("Diego Giagio <diego@giagio.com>");
+MODULE_DESCRIPTION("Apple iPhone USB Ethernet driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/usb/kalmia.c b/drivers/net/usb/kalmia.c
new file mode 100644
index 000000000..613fc6910
--- /dev/null
+++ b/drivers/net/usb/kalmia.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * USB network interface driver for Samsung Kalmia based LTE USB modem like the
+ * Samsung GT-B3730 and GT-B3710.
+ *
+ * Copyright (C) 2011 Marius Bjoernstad Kotsbak <marius@kotsbak.com>
+ *
+ * Sponsored by Quicklink Video Distribution Services Ltd.
+ *
+ * Based on the cdc_eem module.
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/gfp.h>
+
+/*
+ * The Samsung Kalmia based LTE USB modems have a CDC ACM port for modem control
+ * handled by the "option" module and an ethernet data port handled by this
+ * module.
+ *
+ * The stick must first be switched into modem mode by usb_modeswitch
+ * or similar tool. Then the modem gets sent two initialization packets by
+ * this module, which gives the MAC address of the device. User space can then
+ * connect the modem using AT commands through the ACM port and then use
+ * DHCP on the network interface exposed by this module. Network packets are
+ * sent to and from the modem in a proprietary format discovered after watching
+ * the behavior of the windows driver for the modem.
+ *
+ * More information about the use of the modem is available in usb_modeswitch
+ * forum and the project page:
+ *
+ * http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
+ * https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver
+ */
+
+/* #define	DEBUG */
+/* #define	VERBOSE */
+
+#define KALMIA_HEADER_LENGTH 6
+#define KALMIA_ALIGN_SIZE 4
+#define KALMIA_USB_TIMEOUT 10000
+
+/*-------------------------------------------------------------------------*/
+
+static int
+kalmia_send_init_packet(struct usbnet *dev, u8 *init_msg, u8 init_msg_len,
+	u8 *buffer, u8 expected_len)
+{
+	int act_len;
+	int status;
+
+	netdev_dbg(dev->net, "Sending init packet");
+
+	status = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 0x02),
+		init_msg, init_msg_len, &act_len, KALMIA_USB_TIMEOUT);
+	if (status != 0) {
+		netdev_err(dev->net,
+			"Error sending init packet. Status %i\n",
+			status);
+		return status;
+	}
+	else if (act_len != init_msg_len) {
+		netdev_err(dev->net,
+			"Did not send all of init packet. Bytes sent: %i",
+			act_len);
+	}
+	else {
+		netdev_dbg(dev->net, "Successfully sent init packet.");
+	}
+
+	status = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, 0x81),
+		buffer, expected_len, &act_len, KALMIA_USB_TIMEOUT);
+
+	if (status != 0)
+		netdev_err(dev->net,
+			"Error receiving init result. Status %i\n",
+			status);
+	else if (act_len != expected_len)
+		netdev_err(dev->net, "Unexpected init result length: %i\n",
+			act_len);
+
+	return status;
+}
+
+static int
+kalmia_init_and_get_ethernet_addr(struct usbnet *dev, u8 *ethernet_addr)
+{
+	static const char init_msg_1[] =
+		{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
+		0x00, 0x00 };
+	static const char init_msg_2[] =
+		{ 0x57, 0x50, 0x04, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0xf4,
+		0x00, 0x00 };
+	static const int buflen = 28;
+	char *usb_buf;
+	int status;
+
+	usb_buf = kmalloc(buflen, GFP_DMA | GFP_KERNEL);
+	if (!usb_buf)
+		return -ENOMEM;
+
+	memcpy(usb_buf, init_msg_1, 12);
+	status = kalmia_send_init_packet(dev, usb_buf, ARRAY_SIZE(init_msg_1),
+					 usb_buf, 24);
+	if (status != 0)
+		goto out;
+
+	memcpy(usb_buf, init_msg_2, 12);
+	status = kalmia_send_init_packet(dev, usb_buf, ARRAY_SIZE(init_msg_2),
+					 usb_buf, 28);
+	if (status != 0)
+		goto out;
+
+	memcpy(ethernet_addr, usb_buf + 10, ETH_ALEN);
+out:
+	kfree(usb_buf);
+	return status;
+}
+
+static int
+kalmia_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status;
+	u8 ethernet_addr[ETH_ALEN];
+
+	/* Don't bind to AT command interface */
+	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+		return -EINVAL;
+
+	dev->in = usb_rcvbulkpipe(dev->udev, 0x81 & USB_ENDPOINT_NUMBER_MASK);
+	dev->out = usb_sndbulkpipe(dev->udev, 0x02 & USB_ENDPOINT_NUMBER_MASK);
+	dev->status = NULL;
+
+	dev->net->hard_header_len += KALMIA_HEADER_LENGTH;
+	dev->hard_mtu = 1400;
+	dev->rx_urb_size = dev->hard_mtu * 10; // Found as optimal after testing
+
+	status = kalmia_init_and_get_ethernet_addr(dev, ethernet_addr);
+	if (status)
+		return status;
+
+	eth_hw_addr_set(dev->net, ethernet_addr);
+
+	return status;
+}
+
+static struct sk_buff *
+kalmia_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *skb2 = NULL;
+	u16 content_len;
+	unsigned char *header_start;
+	unsigned char ether_type_1, ether_type_2;
+	u8 remainder, padlen = 0;
+
+	if (!skb_cloned(skb)) {
+		int headroom = skb_headroom(skb);
+		int tailroom = skb_tailroom(skb);
+
+		if ((tailroom >= KALMIA_ALIGN_SIZE) && (headroom
+			>= KALMIA_HEADER_LENGTH))
+			goto done;
+
+		if ((headroom + tailroom) > (KALMIA_HEADER_LENGTH
+			+ KALMIA_ALIGN_SIZE)) {
+			skb->data = memmove(skb->head + KALMIA_HEADER_LENGTH,
+				skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+			goto done;
+		}
+	}
+
+	skb2 = skb_copy_expand(skb, KALMIA_HEADER_LENGTH,
+		KALMIA_ALIGN_SIZE, flags);
+	if (!skb2)
+		return NULL;
+
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+
+done:
+	header_start = skb_push(skb, KALMIA_HEADER_LENGTH);
+	ether_type_1 = header_start[KALMIA_HEADER_LENGTH + 12];
+	ether_type_2 = header_start[KALMIA_HEADER_LENGTH + 13];
+
+	netdev_dbg(dev->net, "Sending etherType: %02x%02x", ether_type_1,
+		ether_type_2);
+
+	/* According to empiric data for data packages */
+	header_start[0] = 0x57;
+	header_start[1] = 0x44;
+	content_len = skb->len - KALMIA_HEADER_LENGTH;
+
+	put_unaligned_le16(content_len, &header_start[2]);
+	header_start[4] = ether_type_1;
+	header_start[5] = ether_type_2;
+
+	/* Align to 4 bytes by padding with zeros */
+	remainder = skb->len % KALMIA_ALIGN_SIZE;
+	if (remainder > 0) {
+		padlen = KALMIA_ALIGN_SIZE - remainder;
+		skb_put_zero(skb, padlen);
+	}
+
+	netdev_dbg(dev->net,
+		"Sending package with length %i and padding %i. Header: %6phC.",
+		content_len, padlen, header_start);
+
+	return skb;
+}
+
+static int
+kalmia_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/*
+	 * Our task here is to strip off framing, leaving skb with one
+	 * data frame for the usbnet framework code to process.
+	 */
+	static const u8 HEADER_END_OF_USB_PACKET[] =
+		{ 0x57, 0x5a, 0x00, 0x00, 0x08, 0x00 };
+	static const u8 EXPECTED_UNKNOWN_HEADER_1[] =
+		{ 0x57, 0x43, 0x1e, 0x00, 0x15, 0x02 };
+	static const u8 EXPECTED_UNKNOWN_HEADER_2[] =
+		{ 0x57, 0x50, 0x0e, 0x00, 0x00, 0x00 };
+	int i = 0;
+
+	/* incomplete header? */
+	if (skb->len < KALMIA_HEADER_LENGTH)
+		return 0;
+
+	do {
+		struct sk_buff *skb2 = NULL;
+		u8 *header_start;
+		u16 usb_packet_length, ether_packet_length;
+		int is_last;
+
+		header_start = skb->data;
+
+		if (unlikely(header_start[0] != 0x57 || header_start[1] != 0x44)) {
+			if (!memcmp(header_start, EXPECTED_UNKNOWN_HEADER_1,
+				sizeof(EXPECTED_UNKNOWN_HEADER_1)) || !memcmp(
+				header_start, EXPECTED_UNKNOWN_HEADER_2,
+				sizeof(EXPECTED_UNKNOWN_HEADER_2))) {
+				netdev_dbg(dev->net,
+					"Received expected unknown frame header: %6phC. Package length: %i\n",
+					header_start,
+					skb->len - KALMIA_HEADER_LENGTH);
+			}
+			else {
+				netdev_err(dev->net,
+					"Received unknown frame header: %6phC. Package length: %i\n",
+					header_start,
+					skb->len - KALMIA_HEADER_LENGTH);
+				return 0;
+			}
+		}
+		else
+			netdev_dbg(dev->net,
+				"Received header: %6phC. Package length: %i\n",
+				header_start, skb->len - KALMIA_HEADER_LENGTH);
+
+		/* subtract start header and end header */
+		usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH);
+		ether_packet_length = get_unaligned_le16(&header_start[2]);
+		skb_pull(skb, KALMIA_HEADER_LENGTH);
+
+		/* Some small packets misses end marker */
+		if (usb_packet_length < ether_packet_length) {
+			ether_packet_length = usb_packet_length
+				+ KALMIA_HEADER_LENGTH;
+			is_last = true;
+		}
+		else {
+			netdev_dbg(dev->net, "Correct package length #%i", i
+				+ 1);
+
+			is_last = (memcmp(skb->data + ether_packet_length,
+				HEADER_END_OF_USB_PACKET,
+				sizeof(HEADER_END_OF_USB_PACKET)) == 0);
+			if (!is_last) {
+				header_start = skb->data + ether_packet_length;
+				netdev_dbg(dev->net,
+					"End header: %6phC. Package length: %i\n",
+					header_start,
+					skb->len - KALMIA_HEADER_LENGTH);
+			}
+		}
+
+		if (is_last) {
+			skb2 = skb;
+		}
+		else {
+			skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!skb2))
+				return 0;
+		}
+
+		skb_trim(skb2, ether_packet_length);
+
+		if (is_last) {
+			return 1;
+		}
+		else {
+			usbnet_skb_return(dev, skb2);
+			skb_pull(skb, ether_packet_length);
+		}
+
+		i++;
+	}
+	while (skb->len);
+
+	return 1;
+}
+
+static const struct driver_info kalmia_info = {
+	.description = "Samsung Kalmia LTE USB dongle",
+	.flags = FLAG_WWAN,
+	.bind = kalmia_bind,
+	.rx_fixup = kalmia_rx_fixup,
+	.tx_fixup = kalmia_tx_fixup
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+	/* The unswitched USB ID, to get the module auto loaded: */
+	{ USB_DEVICE(0x04e8, 0x689a) },
+	/* The stick switched into modem (by e.g. usb_modeswitch): */
+	{ USB_DEVICE(0x04e8, 0x6889),
+		.driver_info = (unsigned long) &kalmia_info, },
+	{ /* EMPTY == end of list */} };
+MODULE_DEVICE_TABLE( usb, products);
+
+static struct usb_driver kalmia_driver = {
+	.name = "kalmia",
+	.id_table = products,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(kalmia_driver);
+
+MODULE_AUTHOR("Marius Bjoernstad Kotsbak <marius@kotsbak.com>");
+MODULE_DESCRIPTION("Samsung Kalmia USB network driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
new file mode 100644
index 000000000..c9efb7df8
--- /dev/null
+++ b/drivers/net/usb/kaweth.c
@@ -0,0 +1,1115 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/****************************************************************
+ *
+ *     kaweth.c - driver for KL5KUSB101 based USB->Ethernet
+ *
+ *     (c) 2000 Interlan Communications
+ *     (c) 2000 Stephane Alnet
+ *     (C) 2001 Brad Hards
+ *     (C) 2002 Oliver Neukum
+ *
+ *     Original author: The Zapman <zapman@interlan.net>
+ *     Inspired by, and much credit goes to Michael Rothwell
+ *     <rothwell@interlan.net> for the test equipment, help, and patience
+ *     Based off of (and with thanks to) Petko Manolov's pegaus.c driver.
+ *     Also many thanks to Joel Silverman and Ed Surprenant at Kawasaki
+ *     for providing the firmware and driver resources.
+ *
+ ****************************************************************/
+
+/* TODO:
+ * Develop test procedures for USB net interfaces
+ * Run test procedures
+ * Fix bugs from previous two steps
+ * Snoop other OSs for any tricks we're not doing
+ * Reduce arbitrary timeouts
+ * Smart multicast support
+ * Temporary MAC change support
+ * Tunable SOFs parameter - ioctl()?
+ * Ethernet stats collection
+ * Code formatting improvements
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/usb.h>
+#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <linux/dma-mapping.h>
+#include <linux/wait.h>
+#include <linux/firmware.h>
+#include <linux/uaccess.h>
+#include <asm/byteorder.h>
+
+#undef DEBUG
+
+#define KAWETH_MTU			1514
+#define KAWETH_BUF_SIZE			1664
+#define KAWETH_TX_TIMEOUT		(5 * HZ)
+#define KAWETH_SCRATCH_SIZE		32
+#define KAWETH_FIRMWARE_BUF_SIZE	4096
+#define KAWETH_CONTROL_TIMEOUT		(30000)
+
+#define KAWETH_STATUS_BROKEN		0x0000001
+#define KAWETH_STATUS_CLOSING		0x0000002
+#define KAWETH_STATUS_SUSPENDING	0x0000004
+
+#define KAWETH_STATUS_BLOCKED (KAWETH_STATUS_CLOSING | KAWETH_STATUS_SUSPENDING)
+
+#define KAWETH_PACKET_FILTER_PROMISCUOUS	0x01
+#define KAWETH_PACKET_FILTER_ALL_MULTICAST	0x02
+#define KAWETH_PACKET_FILTER_DIRECTED		0x04
+#define KAWETH_PACKET_FILTER_BROADCAST		0x08
+#define KAWETH_PACKET_FILTER_MULTICAST		0x10
+
+/* Table 7 */
+#define KAWETH_COMMAND_GET_ETHERNET_DESC	0x00
+#define KAWETH_COMMAND_MULTICAST_FILTERS        0x01
+#define KAWETH_COMMAND_SET_PACKET_FILTER	0x02
+#define KAWETH_COMMAND_STATISTICS               0x03
+#define KAWETH_COMMAND_SET_TEMP_MAC     	0x06
+#define KAWETH_COMMAND_GET_TEMP_MAC             0x07
+#define KAWETH_COMMAND_SET_URB_SIZE		0x08
+#define KAWETH_COMMAND_SET_SOFS_WAIT		0x09
+#define KAWETH_COMMAND_SCAN			0xFF
+
+#define KAWETH_SOFS_TO_WAIT			0x05
+
+#define INTBUFFERSIZE				4
+
+#define STATE_OFFSET				0
+#define STATE_MASK				0x40
+#define	STATE_SHIFT				5
+
+#define IS_BLOCKED(s) (s & KAWETH_STATUS_BLOCKED)
+
+
+MODULE_AUTHOR("Michael Zappe <zapman@interlan.net>, Stephane Alnet <stephane@u-picardie.fr>, Brad Hards <bhards@bigpond.net.au> and Oliver Neukum <oliver@neukum.org>");
+MODULE_DESCRIPTION("KL5USB101 USB Ethernet driver");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("kaweth/new_code.bin");
+MODULE_FIRMWARE("kaweth/new_code_fix.bin");
+MODULE_FIRMWARE("kaweth/trigger_code.bin");
+MODULE_FIRMWARE("kaweth/trigger_code_fix.bin");
+
+static const char driver_name[] = "kaweth";
+
+static int kaweth_probe(
+		struct usb_interface *intf,
+		const struct usb_device_id *id	/* from id_table */
+	);
+static void kaweth_disconnect(struct usb_interface *intf);
+static int kaweth_suspend(struct usb_interface *intf, pm_message_t message);
+static int kaweth_resume(struct usb_interface *intf);
+
+/****************************************************************
+ *     usb_device_id
+ ****************************************************************/
+static const struct usb_device_id usb_klsi_table[] = {
+	{ USB_DEVICE(0x03e8, 0x0008) }, /* AOX Endpoints USB Ethernet */
+	{ USB_DEVICE(0x04bb, 0x0901) }, /* I-O DATA USB-ET/T */
+	{ USB_DEVICE(0x0506, 0x03e8) }, /* 3Com 3C19250 */
+	{ USB_DEVICE(0x0506, 0x11f8) }, /* 3Com 3C460 */
+	{ USB_DEVICE(0x0557, 0x2002) }, /* ATEN USB Ethernet */
+	{ USB_DEVICE(0x0557, 0x4000) }, /* D-Link DSB-650C */
+	{ USB_DEVICE(0x0565, 0x0002) }, /* Peracom Enet */
+	{ USB_DEVICE(0x0565, 0x0003) }, /* Optus@Home UEP1045A */
+	{ USB_DEVICE(0x0565, 0x0005) }, /* Peracom Enet2 */
+	{ USB_DEVICE(0x05e9, 0x0008) }, /* KLSI KL5KUSB101B */
+	{ USB_DEVICE(0x05e9, 0x0009) }, /* KLSI KL5KUSB101B (Board change) */
+	{ USB_DEVICE(0x066b, 0x2202) }, /* Linksys USB10T */
+	{ USB_DEVICE(0x06e1, 0x0008) }, /* ADS USB-10BT */
+	{ USB_DEVICE(0x06e1, 0x0009) }, /* ADS USB-10BT */
+	{ USB_DEVICE(0x0707, 0x0100) }, /* SMC 2202USB */
+	{ USB_DEVICE(0x07aa, 0x0001) }, /* Correga K.K. */
+	{ USB_DEVICE(0x07b8, 0x4000) }, /* D-Link DU-E10 */
+	{ USB_DEVICE(0x07c9, 0xb010) }, /* Allied Telesyn AT-USB10 USB Ethernet Adapter */
+	{ USB_DEVICE(0x0846, 0x1001) }, /* NetGear EA-101 */
+	{ USB_DEVICE(0x0846, 0x1002) }, /* NetGear EA-101 */
+	{ USB_DEVICE(0x085a, 0x0008) }, /* PortGear Ethernet Adapter */
+	{ USB_DEVICE(0x085a, 0x0009) }, /* PortGear Ethernet Adapter */
+	{ USB_DEVICE(0x087d, 0x5704) }, /* Jaton USB Ethernet Device Adapter */
+	{ USB_DEVICE(0x0951, 0x0008) }, /* Kingston Technology USB Ethernet Adapter */
+	{ USB_DEVICE(0x095a, 0x3003) }, /* Portsmith Express Ethernet Adapter */
+	{ USB_DEVICE(0x10bd, 0x1427) }, /* ASANTE USB To Ethernet Adapter */
+	{ USB_DEVICE(0x1342, 0x0204) }, /* Mobility USB-Ethernet Adapter */
+	{ USB_DEVICE(0x13d2, 0x0400) }, /* Shark Pocket Adapter */
+	{ USB_DEVICE(0x1485, 0x0001) },	/* Silicom U2E */
+	{ USB_DEVICE(0x1485, 0x0002) }, /* Psion Dacom Gold Port Ethernet */
+	{ USB_DEVICE(0x1645, 0x0005) }, /* Entrega E45 */
+	{ USB_DEVICE(0x1645, 0x0008) }, /* Entrega USB Ethernet Adapter */
+	{ USB_DEVICE(0x1645, 0x8005) }, /* PortGear Ethernet Adapter */
+	{ USB_DEVICE(0x1668, 0x0323) }, /* Actiontec USB Ethernet */
+	{ USB_DEVICE(0x2001, 0x4000) }, /* D-link DSB-650C */
+	{} /* Null terminator */
+};
+
+MODULE_DEVICE_TABLE (usb, usb_klsi_table);
+
+/****************************************************************
+ *     kaweth_driver
+ ****************************************************************/
+static struct usb_driver kaweth_driver = {
+	.name =		driver_name,
+	.probe =	kaweth_probe,
+	.disconnect =	kaweth_disconnect,
+	.suspend =	kaweth_suspend,
+	.resume =	kaweth_resume,
+	.id_table =     usb_klsi_table,
+	.supports_autosuspend =	1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+typedef __u8 eth_addr_t[6];
+
+/****************************************************************
+ *     usb_eth_dev
+ ****************************************************************/
+struct usb_eth_dev {
+	char *name;
+	__u16 vendor;
+	__u16 device;
+	void *pdata;
+};
+
+/****************************************************************
+ *     kaweth_ethernet_configuration
+ *     Refer Table 8
+ ****************************************************************/
+struct kaweth_ethernet_configuration
+{
+	__u8 size;
+	__u8 reserved1;
+	__u8 reserved2;
+	eth_addr_t hw_addr;
+	__u32 statistics_mask;
+	__le16 segment_size;
+	__u16 max_multicast_filters;
+	__u8 reserved3;
+} __packed;
+
+/****************************************************************
+ *     kaweth_device
+ ****************************************************************/
+struct kaweth_device
+{
+	spinlock_t device_lock;
+
+	__u32 status;
+	int end;
+	int suspend_lowmem_rx;
+	int suspend_lowmem_ctrl;
+	int linkstate;
+	int opened;
+	struct delayed_work lowmem_work;
+
+	struct usb_device *dev;
+	struct usb_interface *intf;
+	struct net_device *net;
+	wait_queue_head_t term_wait;
+
+	struct urb *rx_urb;
+	struct urb *tx_urb;
+	struct urb *irq_urb;
+
+	dma_addr_t intbufferhandle;
+	__u8 *intbuffer;
+	dma_addr_t rxbufferhandle;
+	__u8 *rx_buf;
+
+
+	struct sk_buff *tx_skb;
+
+	__u8 *firmware_buf;
+	__u8 scratch[KAWETH_SCRATCH_SIZE];
+	__u16 packet_filter_bitmap;
+
+	struct kaweth_ethernet_configuration configuration;
+};
+
+/****************************************************************
+ *     kaweth_read_configuration
+ ****************************************************************/
+static int kaweth_read_configuration(struct kaweth_device *kaweth)
+{
+	return usb_control_msg(kaweth->dev, usb_rcvctrlpipe(kaweth->dev, 0),
+				KAWETH_COMMAND_GET_ETHERNET_DESC,
+				USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE,
+				0, 0,
+				&kaweth->configuration,
+				sizeof(kaweth->configuration),
+				KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ *     kaweth_set_urb_size
+ ****************************************************************/
+static int kaweth_set_urb_size(struct kaweth_device *kaweth, __u16 urb_size)
+{
+	netdev_dbg(kaweth->net, "Setting URB size to %d\n", (unsigned)urb_size);
+
+	return usb_control_msg(kaweth->dev, usb_sndctrlpipe(kaweth->dev, 0),
+			       KAWETH_COMMAND_SET_URB_SIZE,
+			       USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			       urb_size, 0,
+			       &kaweth->scratch, 0,
+			       KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ *     kaweth_set_sofs_wait
+ ****************************************************************/
+static int kaweth_set_sofs_wait(struct kaweth_device *kaweth, __u16 sofs_wait)
+{
+	netdev_dbg(kaweth->net, "Set SOFS wait to %d\n", (unsigned)sofs_wait);
+
+	return usb_control_msg(kaweth->dev, usb_sndctrlpipe(kaweth->dev, 0),
+			       KAWETH_COMMAND_SET_SOFS_WAIT,
+			       USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			       sofs_wait, 0,
+			       &kaweth->scratch, 0,
+			       KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ *     kaweth_set_receive_filter
+ ****************************************************************/
+static int kaweth_set_receive_filter(struct kaweth_device *kaweth,
+				     __u16 receive_filter)
+{
+	netdev_dbg(kaweth->net, "Set receive filter to %d\n",
+		   (unsigned)receive_filter);
+
+	return usb_control_msg(kaweth->dev, usb_sndctrlpipe(kaweth->dev, 0),
+			       KAWETH_COMMAND_SET_PACKET_FILTER,
+			       USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			       receive_filter, 0,
+			       &kaweth->scratch, 0,
+			       KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ *     kaweth_download_firmware
+ ****************************************************************/
+static int kaweth_download_firmware(struct kaweth_device *kaweth,
+				    const char *fwname,
+				    __u8 interrupt,
+				    __u8 type)
+{
+	const struct firmware *fw;
+	int data_len;
+	int ret;
+
+	ret = request_firmware(&fw, fwname, &kaweth->dev->dev);
+	if (ret) {
+		dev_err(&kaweth->intf->dev, "Firmware request failed\n");
+		return ret;
+	}
+
+	if (fw->size > KAWETH_FIRMWARE_BUF_SIZE) {
+		dev_err(&kaweth->intf->dev, "Firmware too big: %zu\n",
+			fw->size);
+		release_firmware(fw);
+		return -ENOSPC;
+	}
+	data_len = fw->size;
+	memcpy(kaweth->firmware_buf, fw->data, fw->size);
+
+	release_firmware(fw);
+
+	kaweth->firmware_buf[2] = (data_len & 0xFF) - 7;
+	kaweth->firmware_buf[3] = data_len >> 8;
+	kaweth->firmware_buf[4] = type;
+	kaweth->firmware_buf[5] = interrupt;
+
+	netdev_dbg(kaweth->net, "High: %i, Low:%i\n", kaweth->firmware_buf[3],
+		   kaweth->firmware_buf[2]);
+
+	netdev_dbg(kaweth->net,
+		   "Downloading firmware at %p to kaweth device at %p\n",
+		   kaweth->firmware_buf, kaweth);
+	netdev_dbg(kaweth->net, "Firmware length: %d\n", data_len);
+
+	return usb_control_msg(kaweth->dev, usb_sndctrlpipe(kaweth->dev, 0),
+			      KAWETH_COMMAND_SCAN,
+			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			      0, 0,
+			      kaweth->firmware_buf, data_len,
+			      KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ *     kaweth_trigger_firmware
+ ****************************************************************/
+static int kaweth_trigger_firmware(struct kaweth_device *kaweth,
+				   __u8 interrupt)
+{
+	kaweth->firmware_buf[0] = 0xB6;
+	kaweth->firmware_buf[1] = 0xC3;
+	kaweth->firmware_buf[2] = 0x01;
+	kaweth->firmware_buf[3] = 0x00;
+	kaweth->firmware_buf[4] = 0x06;
+	kaweth->firmware_buf[5] = interrupt;
+	kaweth->firmware_buf[6] = 0x00;
+	kaweth->firmware_buf[7] = 0x00;
+
+	return usb_control_msg(kaweth->dev, usb_sndctrlpipe(kaweth->dev, 0),
+			       KAWETH_COMMAND_SCAN,
+			       USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			       0, 0,
+			       (void *)kaweth->firmware_buf, 8,
+			       KAWETH_CONTROL_TIMEOUT);
+}
+
+/****************************************************************
+ *     kaweth_reset
+ ****************************************************************/
+static int kaweth_reset(struct kaweth_device *kaweth)
+{
+	int result;
+
+	result = usb_reset_configuration(kaweth->dev);
+	mdelay(10);
+
+	netdev_dbg(kaweth->net, "kaweth_reset() returns %d.\n", result);
+
+	return result;
+}
+
+static void kaweth_usb_receive(struct urb *);
+static int kaweth_resubmit_rx_urb(struct kaweth_device *, gfp_t);
+
+/****************************************************************
+	int_callback
+*****************************************************************/
+
+static void kaweth_resubmit_int_urb(struct kaweth_device *kaweth, gfp_t mf)
+{
+	int status;
+
+	status = usb_submit_urb (kaweth->irq_urb, mf);
+	if (unlikely(status == -ENOMEM)) {
+		kaweth->suspend_lowmem_ctrl = 1;
+		schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
+	} else {
+		kaweth->suspend_lowmem_ctrl = 0;
+	}
+
+	if (status)
+		dev_err(&kaweth->intf->dev,
+			"can't resubmit intr, %s-%s, status %d\n",
+			kaweth->dev->bus->bus_name,
+			kaweth->dev->devpath, status);
+}
+
+static void int_callback(struct urb *u)
+{
+	struct kaweth_device *kaweth = u->context;
+	int act_state;
+	int status = u->status;
+
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	/* -EPIPE:  should clear the halt */
+	default:		/* error */
+		goto resubmit;
+	}
+
+	/* we check the link state to report changes */
+	if (kaweth->linkstate != (act_state = ( kaweth->intbuffer[STATE_OFFSET] | STATE_MASK) >> STATE_SHIFT)) {
+		if (act_state)
+			netif_carrier_on(kaweth->net);
+		else
+			netif_carrier_off(kaweth->net);
+
+		kaweth->linkstate = act_state;
+	}
+resubmit:
+	kaweth_resubmit_int_urb(kaweth, GFP_ATOMIC);
+}
+
+static void kaweth_resubmit_tl(struct work_struct *work)
+{
+	struct kaweth_device *kaweth =
+		container_of(work, struct kaweth_device, lowmem_work.work);
+
+	if (IS_BLOCKED(kaweth->status))
+		return;
+
+	if (kaweth->suspend_lowmem_rx)
+		kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
+
+	if (kaweth->suspend_lowmem_ctrl)
+		kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
+}
+
+
+/****************************************************************
+ *     kaweth_resubmit_rx_urb
+ ****************************************************************/
+static int kaweth_resubmit_rx_urb(struct kaweth_device *kaweth,
+						gfp_t mem_flags)
+{
+	int result;
+
+	usb_fill_bulk_urb(kaweth->rx_urb,
+		      kaweth->dev,
+		      usb_rcvbulkpipe(kaweth->dev, 1),
+		      kaweth->rx_buf,
+		      KAWETH_BUF_SIZE,
+		      kaweth_usb_receive,
+		      kaweth);
+	kaweth->rx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+	kaweth->rx_urb->transfer_dma = kaweth->rxbufferhandle;
+
+	if((result = usb_submit_urb(kaweth->rx_urb, mem_flags))) {
+		if (result == -ENOMEM) {
+			kaweth->suspend_lowmem_rx = 1;
+			schedule_delayed_work(&kaweth->lowmem_work, HZ/4);
+		}
+		dev_err(&kaweth->intf->dev, "resubmitting rx_urb %d failed\n",
+			result);
+	} else {
+		kaweth->suspend_lowmem_rx = 0;
+	}
+
+	return result;
+}
+
+static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth,
+				     bool may_sleep);
+
+/****************************************************************
+ *     kaweth_usb_receive
+ ****************************************************************/
+static void kaweth_usb_receive(struct urb *urb)
+{
+	struct device *dev = &urb->dev->dev;
+	struct kaweth_device *kaweth = urb->context;
+	struct net_device *net = kaweth->net;
+	int status = urb->status;
+	unsigned long flags;
+	int count = urb->actual_length;
+	int count2 = urb->transfer_buffer_length;
+
+	__u16 pkt_len = le16_to_cpup((__le16 *)kaweth->rx_buf);
+
+	struct sk_buff *skb;
+
+	if (unlikely(status == -EPIPE)) {
+		net->stats.rx_errors++;
+		kaweth->end = 1;
+		wake_up(&kaweth->term_wait);
+		dev_dbg(dev, "Status was -EPIPE.\n");
+		return;
+	}
+	if (unlikely(status == -ECONNRESET || status == -ESHUTDOWN)) {
+		/* we are killed - set a flag and wake the disconnect handler */
+		kaweth->end = 1;
+		wake_up(&kaweth->term_wait);
+		dev_dbg(dev, "Status was -ECONNRESET or -ESHUTDOWN.\n");
+		return;
+	}
+	if (unlikely(status == -EPROTO || status == -ETIME ||
+		     status == -EILSEQ)) {
+		net->stats.rx_errors++;
+		dev_dbg(dev, "Status was -EPROTO, -ETIME, or -EILSEQ.\n");
+		return;
+	}
+	if (unlikely(status == -EOVERFLOW)) {
+		net->stats.rx_errors++;
+		dev_dbg(dev, "Status was -EOVERFLOW.\n");
+	}
+	spin_lock_irqsave(&kaweth->device_lock, flags);
+	if (IS_BLOCKED(kaweth->status)) {
+		spin_unlock_irqrestore(&kaweth->device_lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&kaweth->device_lock, flags);
+
+	if(status && status != -EREMOTEIO && count != 1) {
+		dev_err(&kaweth->intf->dev,
+			"%s RX status: %d count: %d packet_len: %d\n",
+			net->name, status, count, (int)pkt_len);
+		kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+                return;
+	}
+
+	if(kaweth->net && (count > 2)) {
+		if(pkt_len > (count - 2)) {
+			dev_err(&kaweth->intf->dev,
+				"Packet length too long for USB frame (pkt_len: %x, count: %x)\n",
+				pkt_len, count);
+			dev_err(&kaweth->intf->dev, "Packet len & 2047: %x\n",
+				pkt_len & 2047);
+			dev_err(&kaweth->intf->dev, "Count 2: %x\n", count2);
+		        kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+                        return;
+                }
+
+		if(!(skb = dev_alloc_skb(pkt_len+2))) {
+		        kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+                        return;
+		}
+
+		skb_reserve(skb, 2);    /* Align IP on 16 byte boundaries */
+
+		skb_copy_to_linear_data(skb, kaweth->rx_buf + 2, pkt_len);
+
+		skb_put(skb, pkt_len);
+
+		skb->protocol = eth_type_trans(skb, net);
+
+		netif_rx(skb);
+
+		net->stats.rx_packets++;
+		net->stats.rx_bytes += pkt_len;
+	}
+
+	kaweth_resubmit_rx_urb(kaweth, GFP_ATOMIC);
+}
+
+/****************************************************************
+ *     kaweth_open
+ ****************************************************************/
+static int kaweth_open(struct net_device *net)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+	int res;
+
+	res = usb_autopm_get_interface(kaweth->intf);
+	if (res) {
+		dev_err(&kaweth->intf->dev, "Interface cannot be resumed.\n");
+		return -EIO;
+	}
+	res = kaweth_resubmit_rx_urb(kaweth, GFP_KERNEL);
+	if (res)
+		goto err_out;
+
+	usb_fill_int_urb(
+		kaweth->irq_urb,
+		kaweth->dev,
+		usb_rcvintpipe(kaweth->dev, 3),
+		kaweth->intbuffer,
+		INTBUFFERSIZE,
+		int_callback,
+		kaweth,
+		250); /* overriding the descriptor */
+	kaweth->irq_urb->transfer_dma = kaweth->intbufferhandle;
+	kaweth->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	res = usb_submit_urb(kaweth->irq_urb, GFP_KERNEL);
+	if (res) {
+		usb_kill_urb(kaweth->rx_urb);
+		goto err_out;
+	}
+	kaweth->opened = 1;
+
+	netif_start_queue(net);
+
+	kaweth_async_set_rx_mode(kaweth, true);
+	return 0;
+
+err_out:
+	usb_autopm_put_interface(kaweth->intf);
+	return -EIO;
+}
+
+/****************************************************************
+ *     kaweth_kill_urbs
+ ****************************************************************/
+static void kaweth_kill_urbs(struct kaweth_device *kaweth)
+{
+	usb_kill_urb(kaweth->irq_urb);
+	usb_kill_urb(kaweth->rx_urb);
+	usb_kill_urb(kaweth->tx_urb);
+
+	cancel_delayed_work_sync(&kaweth->lowmem_work);
+
+	/* a scheduled work may have resubmitted,
+	   we hit them again */
+	usb_kill_urb(kaweth->irq_urb);
+	usb_kill_urb(kaweth->rx_urb);
+}
+
+/****************************************************************
+ *     kaweth_close
+ ****************************************************************/
+static int kaweth_close(struct net_device *net)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+
+	netif_stop_queue(net);
+	kaweth->opened = 0;
+
+	kaweth->status |= KAWETH_STATUS_CLOSING;
+
+	kaweth_kill_urbs(kaweth);
+
+	kaweth->status &= ~KAWETH_STATUS_CLOSING;
+
+	usb_autopm_put_interface(kaweth->intf);
+
+	return 0;
+}
+
+static u32 kaweth_get_link(struct net_device *dev)
+{
+	struct kaweth_device *kaweth = netdev_priv(dev);
+
+	return kaweth->linkstate;
+}
+
+static const struct ethtool_ops ops = {
+	.get_link	= kaweth_get_link
+};
+
+/****************************************************************
+ *     kaweth_usb_transmit_complete
+ ****************************************************************/
+static void kaweth_usb_transmit_complete(struct urb *urb)
+{
+	struct kaweth_device *kaweth = urb->context;
+	struct sk_buff *skb = kaweth->tx_skb;
+	int status = urb->status;
+
+	if (unlikely(status != 0))
+		if (status != -ENOENT)
+			dev_dbg(&urb->dev->dev, "%s: TX status %d.\n",
+				kaweth->net->name, status);
+
+	netif_wake_queue(kaweth->net);
+	dev_kfree_skb_irq(skb);
+}
+
+/****************************************************************
+ *     kaweth_start_xmit
+ ****************************************************************/
+static netdev_tx_t kaweth_start_xmit(struct sk_buff *skb,
+					   struct net_device *net)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+	__le16 *private_header;
+
+	int res;
+
+	spin_lock_irq(&kaweth->device_lock);
+
+	kaweth_async_set_rx_mode(kaweth, false);
+	netif_stop_queue(net);
+	if (IS_BLOCKED(kaweth->status)) {
+		goto skip;
+	}
+
+	/* We now decide whether we can put our special header into the sk_buff */
+	if (skb_cow_head(skb, 2)) {
+		net->stats.tx_errors++;
+		netif_start_queue(net);
+		spin_unlock_irq(&kaweth->device_lock);
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	private_header = __skb_push(skb, 2);
+	*private_header = cpu_to_le16(skb->len-2);
+	kaweth->tx_skb = skb;
+
+	usb_fill_bulk_urb(kaweth->tx_urb,
+		      kaweth->dev,
+		      usb_sndbulkpipe(kaweth->dev, 2),
+		      private_header,
+		      skb->len,
+		      kaweth_usb_transmit_complete,
+		      kaweth);
+	kaweth->end = 0;
+
+	if((res = usb_submit_urb(kaweth->tx_urb, GFP_ATOMIC)))
+	{
+		dev_warn(&net->dev, "kaweth failed tx_urb %d\n", res);
+skip:
+		net->stats.tx_errors++;
+
+		netif_start_queue(net);
+		dev_kfree_skb_irq(skb);
+	}
+	else
+	{
+		net->stats.tx_packets++;
+		net->stats.tx_bytes += skb->len;
+	}
+
+	spin_unlock_irq(&kaweth->device_lock);
+
+	return NETDEV_TX_OK;
+}
+
+/****************************************************************
+ *     kaweth_set_rx_mode
+ ****************************************************************/
+static void kaweth_set_rx_mode(struct net_device *net)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+
+	__u16 packet_filter_bitmap = KAWETH_PACKET_FILTER_DIRECTED |
+                                     KAWETH_PACKET_FILTER_BROADCAST |
+		                     KAWETH_PACKET_FILTER_MULTICAST;
+
+	netdev_dbg(net, "Setting Rx mode to %d\n", packet_filter_bitmap);
+
+	netif_stop_queue(net);
+
+	if (net->flags & IFF_PROMISC) {
+		packet_filter_bitmap |= KAWETH_PACKET_FILTER_PROMISCUOUS;
+	}
+	else if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) {
+		packet_filter_bitmap |= KAWETH_PACKET_FILTER_ALL_MULTICAST;
+	}
+
+	kaweth->packet_filter_bitmap = packet_filter_bitmap;
+	netif_wake_queue(net);
+}
+
+/****************************************************************
+ *     kaweth_async_set_rx_mode
+ ****************************************************************/
+static void kaweth_async_set_rx_mode(struct kaweth_device *kaweth,
+				     bool may_sleep)
+{
+	int ret;
+	__u16 packet_filter_bitmap = kaweth->packet_filter_bitmap;
+
+	kaweth->packet_filter_bitmap = 0;
+	if (packet_filter_bitmap == 0)
+		return;
+
+	if (!may_sleep)
+		return;
+
+	ret = usb_control_msg(kaweth->dev, usb_sndctrlpipe(kaweth->dev, 0),
+			      KAWETH_COMMAND_SET_PACKET_FILTER,
+			      USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
+			      packet_filter_bitmap, 0,
+			      &kaweth->scratch, 0,
+			      KAWETH_CONTROL_TIMEOUT);
+	if (ret < 0)
+		dev_err(&kaweth->intf->dev, "Failed to set Rx mode: %d\n",
+			ret);
+	else
+		netdev_dbg(kaweth->net, "Set Rx mode to %d\n",
+			   packet_filter_bitmap);
+}
+
+/****************************************************************
+ *     kaweth_tx_timeout
+ ****************************************************************/
+static void kaweth_tx_timeout(struct net_device *net, unsigned int txqueue)
+{
+	struct kaweth_device *kaweth = netdev_priv(net);
+
+	dev_warn(&net->dev, "%s: Tx timed out. Resetting.\n", net->name);
+	net->stats.tx_errors++;
+	netif_trans_update(net);
+
+	usb_unlink_urb(kaweth->tx_urb);
+}
+
+/****************************************************************
+ *     kaweth_suspend
+ ****************************************************************/
+static int kaweth_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct kaweth_device *kaweth = usb_get_intfdata(intf);
+	unsigned long flags;
+
+	spin_lock_irqsave(&kaweth->device_lock, flags);
+	kaweth->status |= KAWETH_STATUS_SUSPENDING;
+	spin_unlock_irqrestore(&kaweth->device_lock, flags);
+
+	kaweth_kill_urbs(kaweth);
+	return 0;
+}
+
+/****************************************************************
+ *     kaweth_resume
+ ****************************************************************/
+static int kaweth_resume(struct usb_interface *intf)
+{
+	struct kaweth_device *kaweth = usb_get_intfdata(intf);
+	unsigned long flags;
+
+	spin_lock_irqsave(&kaweth->device_lock, flags);
+	kaweth->status &= ~KAWETH_STATUS_SUSPENDING;
+	spin_unlock_irqrestore(&kaweth->device_lock, flags);
+
+	if (!kaweth->opened)
+		return 0;
+	kaweth_resubmit_rx_urb(kaweth, GFP_NOIO);
+	kaweth_resubmit_int_urb(kaweth, GFP_NOIO);
+
+	return 0;
+}
+
+/****************************************************************
+ *     kaweth_probe
+ ****************************************************************/
+
+
+static const struct net_device_ops kaweth_netdev_ops = {
+	.ndo_open =			kaweth_open,
+	.ndo_stop =			kaweth_close,
+	.ndo_start_xmit =		kaweth_start_xmit,
+	.ndo_tx_timeout =		kaweth_tx_timeout,
+	.ndo_set_rx_mode =		kaweth_set_rx_mode,
+	.ndo_set_mac_address =		eth_mac_addr,
+	.ndo_validate_addr =		eth_validate_addr,
+};
+
+static int kaweth_probe(
+		struct usb_interface *intf,
+		const struct usb_device_id *id      /* from id_table */
+	)
+{
+	struct device *dev = &intf->dev;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct kaweth_device *kaweth;
+	struct net_device *netdev;
+	const eth_addr_t bcast_addr = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+	int result = 0;
+	int rv = -EIO;
+
+	dev_dbg(dev,
+		"Kawasaki Device Probe (Device number:%d): 0x%4.4x:0x%4.4x:0x%4.4x\n",
+		udev->devnum, le16_to_cpu(udev->descriptor.idVendor),
+		le16_to_cpu(udev->descriptor.idProduct),
+		le16_to_cpu(udev->descriptor.bcdDevice));
+
+	dev_dbg(dev, "Device at %p\n", udev);
+
+	dev_dbg(dev, "Descriptor length: %x type: %x\n",
+		(int)udev->descriptor.bLength,
+		(int)udev->descriptor.bDescriptorType);
+
+	netdev = alloc_etherdev(sizeof(*kaweth));
+	if (!netdev)
+		return -ENOMEM;
+
+	kaweth = netdev_priv(netdev);
+	kaweth->dev = udev;
+	kaweth->net = netdev;
+	kaweth->intf = intf;
+
+	spin_lock_init(&kaweth->device_lock);
+	init_waitqueue_head(&kaweth->term_wait);
+
+	dev_dbg(dev, "Resetting.\n");
+
+	kaweth_reset(kaweth);
+
+	/*
+	 * If high byte of bcdDevice is nonzero, firmware is already
+	 * downloaded. Don't try to do it again, or we'll hang the device.
+	 */
+
+	if (le16_to_cpu(udev->descriptor.bcdDevice) >> 8) {
+		dev_info(dev, "Firmware present in device.\n");
+	} else {
+		/* Download the firmware */
+		dev_info(dev, "Downloading firmware...\n");
+		kaweth->firmware_buf = (__u8 *)__get_free_page(GFP_KERNEL);
+		if (!kaweth->firmware_buf) {
+			rv = -ENOMEM;
+			goto err_free_netdev;
+		}
+		if ((result = kaweth_download_firmware(kaweth,
+						      "kaweth/new_code.bin",
+						      100,
+						      2)) < 0) {
+			dev_err(dev, "Error downloading firmware (%d)\n",
+				result);
+			goto err_fw;
+		}
+
+		if ((result = kaweth_download_firmware(kaweth,
+						      "kaweth/new_code_fix.bin",
+						      100,
+						      3)) < 0) {
+			dev_err(dev, "Error downloading firmware fix (%d)\n",
+				result);
+			goto err_fw;
+		}
+
+		if ((result = kaweth_download_firmware(kaweth,
+						      "kaweth/trigger_code.bin",
+						      126,
+						      2)) < 0) {
+			dev_err(dev, "Error downloading trigger code (%d)\n",
+				result);
+			goto err_fw;
+
+		}
+
+		if ((result = kaweth_download_firmware(kaweth,
+						      "kaweth/trigger_code_fix.bin",
+						      126,
+						      3)) < 0) {
+			dev_err(dev, "Error downloading trigger code fix (%d)\n", result);
+			goto err_fw;
+		}
+
+
+		if ((result = kaweth_trigger_firmware(kaweth, 126)) < 0) {
+			dev_err(dev, "Error triggering firmware (%d)\n", result);
+			goto err_fw;
+		}
+
+		/* Device will now disappear for a moment...  */
+		dev_info(dev, "Firmware loaded.  I'll be back...\n");
+err_fw:
+		free_page((unsigned long)kaweth->firmware_buf);
+		free_netdev(netdev);
+		return -EIO;
+	}
+
+	result = kaweth_read_configuration(kaweth);
+
+	if(result < 0) {
+		dev_err(dev, "Error reading configuration (%d), no net device created\n", result);
+		goto err_free_netdev;
+	}
+
+	dev_info(dev, "Statistics collection: %x\n", kaweth->configuration.statistics_mask);
+	dev_info(dev, "Multicast filter limit: %x\n", kaweth->configuration.max_multicast_filters & ((1 << 15) - 1));
+	dev_info(dev, "MTU: %d\n", le16_to_cpu(kaweth->configuration.segment_size));
+	dev_info(dev, "Read MAC address %pM\n", kaweth->configuration.hw_addr);
+
+	if(!memcmp(&kaweth->configuration.hw_addr,
+                   &bcast_addr,
+		   sizeof(bcast_addr))) {
+		dev_err(dev, "Firmware not functioning properly, no net device created\n");
+		goto err_free_netdev;
+	}
+
+	if(kaweth_set_urb_size(kaweth, KAWETH_BUF_SIZE) < 0) {
+		dev_dbg(dev, "Error setting URB size\n");
+		goto err_free_netdev;
+	}
+
+	if(kaweth_set_sofs_wait(kaweth, KAWETH_SOFS_TO_WAIT) < 0) {
+		dev_err(dev, "Error setting SOFS wait\n");
+		goto err_free_netdev;
+	}
+
+	result = kaweth_set_receive_filter(kaweth,
+                                           KAWETH_PACKET_FILTER_DIRECTED |
+                                           KAWETH_PACKET_FILTER_BROADCAST |
+                                           KAWETH_PACKET_FILTER_MULTICAST);
+
+	if(result < 0) {
+		dev_err(dev, "Error setting receive filter\n");
+		goto err_free_netdev;
+	}
+
+	dev_dbg(dev, "Initializing net device.\n");
+
+	kaweth->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!kaweth->tx_urb)
+		goto err_free_netdev;
+	kaweth->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!kaweth->rx_urb)
+		goto err_only_tx;
+	kaweth->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!kaweth->irq_urb)
+		goto err_tx_and_rx;
+
+	kaweth->intbuffer = usb_alloc_coherent(	kaweth->dev,
+						INTBUFFERSIZE,
+						GFP_KERNEL,
+						&kaweth->intbufferhandle);
+	if (!kaweth->intbuffer)
+		goto err_tx_and_rx_and_irq;
+	kaweth->rx_buf = usb_alloc_coherent(	kaweth->dev,
+						KAWETH_BUF_SIZE,
+						GFP_KERNEL,
+						&kaweth->rxbufferhandle);
+	if (!kaweth->rx_buf)
+		goto err_all_but_rxbuf;
+
+	memcpy(netdev->broadcast, &bcast_addr, sizeof(bcast_addr));
+	eth_hw_addr_set(netdev, (u8 *)&kaweth->configuration.hw_addr);
+
+	netdev->netdev_ops = &kaweth_netdev_ops;
+	netdev->watchdog_timeo = KAWETH_TX_TIMEOUT;
+	netdev->mtu = le16_to_cpu(kaweth->configuration.segment_size);
+	netdev->ethtool_ops = &ops;
+
+	/* kaweth is zeroed as part of alloc_netdev */
+	INIT_DELAYED_WORK(&kaweth->lowmem_work, kaweth_resubmit_tl);
+	usb_set_intfdata(intf, kaweth);
+
+	SET_NETDEV_DEV(netdev, dev);
+	if (register_netdev(netdev) != 0) {
+		dev_err(dev, "Error registering netdev.\n");
+		goto err_intfdata;
+	}
+
+	dev_info(dev, "kaweth interface created at %s\n",
+		 kaweth->net->name);
+
+	return 0;
+
+err_intfdata:
+	usb_set_intfdata(intf, NULL);
+	usb_free_coherent(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
+err_all_but_rxbuf:
+	usb_free_coherent(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
+err_tx_and_rx_and_irq:
+	usb_free_urb(kaweth->irq_urb);
+err_tx_and_rx:
+	usb_free_urb(kaweth->rx_urb);
+err_only_tx:
+	usb_free_urb(kaweth->tx_urb);
+err_free_netdev:
+	free_netdev(netdev);
+
+	return rv;
+}
+
+/****************************************************************
+ *     kaweth_disconnect
+ ****************************************************************/
+static void kaweth_disconnect(struct usb_interface *intf)
+{
+	struct kaweth_device *kaweth = usb_get_intfdata(intf);
+	struct net_device *netdev;
+
+	usb_set_intfdata(intf, NULL);
+	if (!kaweth) {
+		dev_warn(&intf->dev, "unregistering non-existent device\n");
+		return;
+	}
+	netdev = kaweth->net;
+
+	netdev_dbg(kaweth->net, "Unregistering net device\n");
+	unregister_netdev(netdev);
+
+	usb_free_urb(kaweth->rx_urb);
+	usb_free_urb(kaweth->tx_urb);
+	usb_free_urb(kaweth->irq_urb);
+
+	usb_free_coherent(kaweth->dev, KAWETH_BUF_SIZE, (void *)kaweth->rx_buf, kaweth->rxbufferhandle);
+	usb_free_coherent(kaweth->dev, INTBUFFERSIZE, (void *)kaweth->intbuffer, kaweth->intbufferhandle);
+
+	free_netdev(netdev);
+}
+
+
+module_usb_driver(kaweth_driver);
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
new file mode 100644
index 000000000..c458c030f
--- /dev/null
+++ b/drivers/net/usb/lan78xx.c
@@ -0,0 +1,5075 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Microchip Technology
+ */
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/if_vlan.h>
+#include <linux/uaccess.h>
+#include <linux/linkmode.h>
+#include <linux/list.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+#include <net/ip6_checksum.h>
+#include <net/vxlan.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/microchipphy.h>
+#include <linux/phy_fixed.h>
+#include <linux/of_mdio.h>
+#include <linux/of_net.h>
+#include "lan78xx.h"
+
+#define DRIVER_AUTHOR	"WOOJUNG HUH <woojung.huh@microchip.com>"
+#define DRIVER_DESC	"LAN78XX USB 3.0 Gigabit Ethernet Devices"
+#define DRIVER_NAME	"lan78xx"
+
+#define TX_TIMEOUT_JIFFIES		(5 * HZ)
+#define THROTTLE_JIFFIES		(HZ / 8)
+#define UNLINK_TIMEOUT_MS		3
+
+#define RX_MAX_QUEUE_MEMORY		(60 * 1518)
+
+#define SS_USB_PKT_SIZE			(1024)
+#define HS_USB_PKT_SIZE			(512)
+#define FS_USB_PKT_SIZE			(64)
+
+#define MAX_RX_FIFO_SIZE		(12 * 1024)
+#define MAX_TX_FIFO_SIZE		(12 * 1024)
+
+#define FLOW_THRESHOLD(n)		((((n) + 511) / 512) & 0x7F)
+#define FLOW_CTRL_THRESHOLD(on, off)	((FLOW_THRESHOLD(on)  << 0) | \
+					 (FLOW_THRESHOLD(off) << 8))
+
+/* Flow control turned on when Rx FIFO level rises above this level (bytes) */
+#define FLOW_ON_SS			9216
+#define FLOW_ON_HS			8704
+
+/* Flow control turned off when Rx FIFO level falls below this level (bytes) */
+#define FLOW_OFF_SS			4096
+#define FLOW_OFF_HS			1024
+
+#define DEFAULT_BURST_CAP_SIZE		(MAX_TX_FIFO_SIZE)
+#define DEFAULT_BULK_IN_DELAY		(0x0800)
+#define MAX_SINGLE_PACKET_SIZE		(9000)
+#define DEFAULT_TX_CSUM_ENABLE		(true)
+#define DEFAULT_RX_CSUM_ENABLE		(true)
+#define DEFAULT_TSO_CSUM_ENABLE		(true)
+#define DEFAULT_VLAN_FILTER_ENABLE	(true)
+#define DEFAULT_VLAN_RX_OFFLOAD		(true)
+#define TX_ALIGNMENT			(4)
+#define RXW_PADDING			2
+
+#define LAN78XX_USB_VENDOR_ID		(0x0424)
+#define LAN7800_USB_PRODUCT_ID		(0x7800)
+#define LAN7850_USB_PRODUCT_ID		(0x7850)
+#define LAN7801_USB_PRODUCT_ID		(0x7801)
+#define LAN78XX_EEPROM_MAGIC		(0x78A5)
+#define LAN78XX_OTP_MAGIC		(0x78F3)
+#define AT29M2AF_USB_VENDOR_ID		(0x07C9)
+#define AT29M2AF_USB_PRODUCT_ID	(0x0012)
+
+#define	MII_READ			1
+#define	MII_WRITE			0
+
+#define EEPROM_INDICATOR		(0xA5)
+#define EEPROM_MAC_OFFSET		(0x01)
+#define MAX_EEPROM_SIZE			512
+#define OTP_INDICATOR_1			(0xF3)
+#define OTP_INDICATOR_2			(0xF7)
+
+#define WAKE_ALL			(WAKE_PHY | WAKE_UCAST | \
+					 WAKE_MCAST | WAKE_BCAST | \
+					 WAKE_ARP | WAKE_MAGIC)
+
+#define TX_URB_NUM			10
+#define TX_SS_URB_NUM			TX_URB_NUM
+#define TX_HS_URB_NUM			TX_URB_NUM
+#define TX_FS_URB_NUM			TX_URB_NUM
+
+/* A single URB buffer must be large enough to hold a complete jumbo packet
+ */
+#define TX_SS_URB_SIZE			(32 * 1024)
+#define TX_HS_URB_SIZE			(16 * 1024)
+#define TX_FS_URB_SIZE			(10 * 1024)
+
+#define RX_SS_URB_NUM			30
+#define RX_HS_URB_NUM			10
+#define RX_FS_URB_NUM			10
+#define RX_SS_URB_SIZE			TX_SS_URB_SIZE
+#define RX_HS_URB_SIZE			TX_HS_URB_SIZE
+#define RX_FS_URB_SIZE			TX_FS_URB_SIZE
+
+#define SS_BURST_CAP_SIZE		RX_SS_URB_SIZE
+#define SS_BULK_IN_DELAY		0x2000
+#define HS_BURST_CAP_SIZE		RX_HS_URB_SIZE
+#define HS_BULK_IN_DELAY		0x2000
+#define FS_BURST_CAP_SIZE		RX_FS_URB_SIZE
+#define FS_BULK_IN_DELAY		0x2000
+
+#define TX_CMD_LEN			8
+#define TX_SKB_MIN_LEN			(TX_CMD_LEN + ETH_HLEN)
+#define LAN78XX_TSO_SIZE(dev)		((dev)->tx_urb_size - TX_SKB_MIN_LEN)
+
+#define RX_CMD_LEN			10
+#define RX_SKB_MIN_LEN			(RX_CMD_LEN + ETH_HLEN)
+#define RX_MAX_FRAME_LEN(mtu)		((mtu) + ETH_HLEN + VLAN_HLEN)
+
+/* USB related defines */
+#define BULK_IN_PIPE			1
+#define BULK_OUT_PIPE			2
+
+/* default autosuspend delay (mSec)*/
+#define DEFAULT_AUTOSUSPEND_DELAY	(10 * 1000)
+
+/* statistic update interval (mSec) */
+#define STAT_UPDATE_TIMER		(1 * 1000)
+
+/* time to wait for MAC or FCT to stop (jiffies) */
+#define HW_DISABLE_TIMEOUT		(HZ / 10)
+
+/* time to wait between polling MAC or FCT state (ms) */
+#define HW_DISABLE_DELAY_MS		1
+
+/* defines interrupts from interrupt EP */
+#define MAX_INT_EP			(32)
+#define INT_EP_INTEP			(31)
+#define INT_EP_OTP_WR_DONE		(28)
+#define INT_EP_EEE_TX_LPI_START		(26)
+#define INT_EP_EEE_TX_LPI_STOP		(25)
+#define INT_EP_EEE_RX_LPI		(24)
+#define INT_EP_MAC_RESET_TIMEOUT	(23)
+#define INT_EP_RDFO			(22)
+#define INT_EP_TXE			(21)
+#define INT_EP_USB_STATUS		(20)
+#define INT_EP_TX_DIS			(19)
+#define INT_EP_RX_DIS			(18)
+#define INT_EP_PHY			(17)
+#define INT_EP_DP			(16)
+#define INT_EP_MAC_ERR			(15)
+#define INT_EP_TDFU			(14)
+#define INT_EP_TDFO			(13)
+#define INT_EP_UTX			(12)
+#define INT_EP_GPIO_11			(11)
+#define INT_EP_GPIO_10			(10)
+#define INT_EP_GPIO_9			(9)
+#define INT_EP_GPIO_8			(8)
+#define INT_EP_GPIO_7			(7)
+#define INT_EP_GPIO_6			(6)
+#define INT_EP_GPIO_5			(5)
+#define INT_EP_GPIO_4			(4)
+#define INT_EP_GPIO_3			(3)
+#define INT_EP_GPIO_2			(2)
+#define INT_EP_GPIO_1			(1)
+#define INT_EP_GPIO_0			(0)
+
+static const char lan78xx_gstrings[][ETH_GSTRING_LEN] = {
+	"RX FCS Errors",
+	"RX Alignment Errors",
+	"Rx Fragment Errors",
+	"RX Jabber Errors",
+	"RX Undersize Frame Errors",
+	"RX Oversize Frame Errors",
+	"RX Dropped Frames",
+	"RX Unicast Byte Count",
+	"RX Broadcast Byte Count",
+	"RX Multicast Byte Count",
+	"RX Unicast Frames",
+	"RX Broadcast Frames",
+	"RX Multicast Frames",
+	"RX Pause Frames",
+	"RX 64 Byte Frames",
+	"RX 65 - 127 Byte Frames",
+	"RX 128 - 255 Byte Frames",
+	"RX 256 - 511 Bytes Frames",
+	"RX 512 - 1023 Byte Frames",
+	"RX 1024 - 1518 Byte Frames",
+	"RX Greater 1518 Byte Frames",
+	"EEE RX LPI Transitions",
+	"EEE RX LPI Time",
+	"TX FCS Errors",
+	"TX Excess Deferral Errors",
+	"TX Carrier Errors",
+	"TX Bad Byte Count",
+	"TX Single Collisions",
+	"TX Multiple Collisions",
+	"TX Excessive Collision",
+	"TX Late Collisions",
+	"TX Unicast Byte Count",
+	"TX Broadcast Byte Count",
+	"TX Multicast Byte Count",
+	"TX Unicast Frames",
+	"TX Broadcast Frames",
+	"TX Multicast Frames",
+	"TX Pause Frames",
+	"TX 64 Byte Frames",
+	"TX 65 - 127 Byte Frames",
+	"TX 128 - 255 Byte Frames",
+	"TX 256 - 511 Bytes Frames",
+	"TX 512 - 1023 Byte Frames",
+	"TX 1024 - 1518 Byte Frames",
+	"TX Greater 1518 Byte Frames",
+	"EEE TX LPI Transitions",
+	"EEE TX LPI Time",
+};
+
+struct lan78xx_statstage {
+	u32 rx_fcs_errors;
+	u32 rx_alignment_errors;
+	u32 rx_fragment_errors;
+	u32 rx_jabber_errors;
+	u32 rx_undersize_frame_errors;
+	u32 rx_oversize_frame_errors;
+	u32 rx_dropped_frames;
+	u32 rx_unicast_byte_count;
+	u32 rx_broadcast_byte_count;
+	u32 rx_multicast_byte_count;
+	u32 rx_unicast_frames;
+	u32 rx_broadcast_frames;
+	u32 rx_multicast_frames;
+	u32 rx_pause_frames;
+	u32 rx_64_byte_frames;
+	u32 rx_65_127_byte_frames;
+	u32 rx_128_255_byte_frames;
+	u32 rx_256_511_bytes_frames;
+	u32 rx_512_1023_byte_frames;
+	u32 rx_1024_1518_byte_frames;
+	u32 rx_greater_1518_byte_frames;
+	u32 eee_rx_lpi_transitions;
+	u32 eee_rx_lpi_time;
+	u32 tx_fcs_errors;
+	u32 tx_excess_deferral_errors;
+	u32 tx_carrier_errors;
+	u32 tx_bad_byte_count;
+	u32 tx_single_collisions;
+	u32 tx_multiple_collisions;
+	u32 tx_excessive_collision;
+	u32 tx_late_collisions;
+	u32 tx_unicast_byte_count;
+	u32 tx_broadcast_byte_count;
+	u32 tx_multicast_byte_count;
+	u32 tx_unicast_frames;
+	u32 tx_broadcast_frames;
+	u32 tx_multicast_frames;
+	u32 tx_pause_frames;
+	u32 tx_64_byte_frames;
+	u32 tx_65_127_byte_frames;
+	u32 tx_128_255_byte_frames;
+	u32 tx_256_511_bytes_frames;
+	u32 tx_512_1023_byte_frames;
+	u32 tx_1024_1518_byte_frames;
+	u32 tx_greater_1518_byte_frames;
+	u32 eee_tx_lpi_transitions;
+	u32 eee_tx_lpi_time;
+};
+
+struct lan78xx_statstage64 {
+	u64 rx_fcs_errors;
+	u64 rx_alignment_errors;
+	u64 rx_fragment_errors;
+	u64 rx_jabber_errors;
+	u64 rx_undersize_frame_errors;
+	u64 rx_oversize_frame_errors;
+	u64 rx_dropped_frames;
+	u64 rx_unicast_byte_count;
+	u64 rx_broadcast_byte_count;
+	u64 rx_multicast_byte_count;
+	u64 rx_unicast_frames;
+	u64 rx_broadcast_frames;
+	u64 rx_multicast_frames;
+	u64 rx_pause_frames;
+	u64 rx_64_byte_frames;
+	u64 rx_65_127_byte_frames;
+	u64 rx_128_255_byte_frames;
+	u64 rx_256_511_bytes_frames;
+	u64 rx_512_1023_byte_frames;
+	u64 rx_1024_1518_byte_frames;
+	u64 rx_greater_1518_byte_frames;
+	u64 eee_rx_lpi_transitions;
+	u64 eee_rx_lpi_time;
+	u64 tx_fcs_errors;
+	u64 tx_excess_deferral_errors;
+	u64 tx_carrier_errors;
+	u64 tx_bad_byte_count;
+	u64 tx_single_collisions;
+	u64 tx_multiple_collisions;
+	u64 tx_excessive_collision;
+	u64 tx_late_collisions;
+	u64 tx_unicast_byte_count;
+	u64 tx_broadcast_byte_count;
+	u64 tx_multicast_byte_count;
+	u64 tx_unicast_frames;
+	u64 tx_broadcast_frames;
+	u64 tx_multicast_frames;
+	u64 tx_pause_frames;
+	u64 tx_64_byte_frames;
+	u64 tx_65_127_byte_frames;
+	u64 tx_128_255_byte_frames;
+	u64 tx_256_511_bytes_frames;
+	u64 tx_512_1023_byte_frames;
+	u64 tx_1024_1518_byte_frames;
+	u64 tx_greater_1518_byte_frames;
+	u64 eee_tx_lpi_transitions;
+	u64 eee_tx_lpi_time;
+};
+
+static u32 lan78xx_regs[] = {
+	ID_REV,
+	INT_STS,
+	HW_CFG,
+	PMT_CTL,
+	E2P_CMD,
+	E2P_DATA,
+	USB_STATUS,
+	VLAN_TYPE,
+	MAC_CR,
+	MAC_RX,
+	MAC_TX,
+	FLOW,
+	ERR_STS,
+	MII_ACC,
+	MII_DATA,
+	EEE_TX_LPI_REQ_DLY,
+	EEE_TW_TX_SYS,
+	EEE_TX_LPI_REM_DLY,
+	WUCSR
+};
+
+#define PHY_REG_SIZE (32 * sizeof(u32))
+
+struct lan78xx_net;
+
+struct lan78xx_priv {
+	struct lan78xx_net *dev;
+	u32 rfe_ctl;
+	u32 mchash_table[DP_SEL_VHF_HASH_LEN]; /* multicast hash table */
+	u32 pfilter_table[NUM_OF_MAF][2]; /* perfect filter table */
+	u32 vlan_table[DP_SEL_VHF_VLAN_LEN];
+	struct mutex dataport_mutex; /* for dataport access */
+	spinlock_t rfe_ctl_lock; /* for rfe register access */
+	struct work_struct set_multicast;
+	struct work_struct set_vlan;
+	u32 wol;
+};
+
+enum skb_state {
+	illegal = 0,
+	tx_start,
+	tx_done,
+	rx_start,
+	rx_done,
+	rx_cleanup,
+	unlink_start
+};
+
+struct skb_data {		/* skb->cb is one of these */
+	struct urb *urb;
+	struct lan78xx_net *dev;
+	enum skb_state state;
+	size_t length;
+	int num_of_packet;
+};
+
+struct usb_context {
+	struct usb_ctrlrequest req;
+	struct lan78xx_net *dev;
+};
+
+#define EVENT_TX_HALT			0
+#define EVENT_RX_HALT			1
+#define EVENT_RX_MEMORY			2
+#define EVENT_STS_SPLIT			3
+#define EVENT_LINK_RESET		4
+#define EVENT_RX_PAUSED			5
+#define EVENT_DEV_WAKING		6
+#define EVENT_DEV_ASLEEP		7
+#define EVENT_DEV_OPEN			8
+#define EVENT_STAT_UPDATE		9
+#define EVENT_DEV_DISCONNECT		10
+
+struct statstage {
+	struct mutex			access_lock;	/* for stats access */
+	struct lan78xx_statstage	saved;
+	struct lan78xx_statstage	rollover_count;
+	struct lan78xx_statstage	rollover_max;
+	struct lan78xx_statstage64	curr_stat;
+};
+
+struct irq_domain_data {
+	struct irq_domain	*irqdomain;
+	unsigned int		phyirq;
+	struct irq_chip		*irqchip;
+	irq_flow_handler_t	irq_handler;
+	u32			irqenable;
+	struct mutex		irq_lock;		/* for irq bus access */
+};
+
+struct lan78xx_net {
+	struct net_device	*net;
+	struct usb_device	*udev;
+	struct usb_interface	*intf;
+	void			*driver_priv;
+
+	unsigned int		tx_pend_data_len;
+	size_t			n_tx_urbs;
+	size_t			n_rx_urbs;
+	size_t			tx_urb_size;
+	size_t			rx_urb_size;
+
+	struct sk_buff_head	rxq_free;
+	struct sk_buff_head	rxq;
+	struct sk_buff_head	rxq_done;
+	struct sk_buff_head	rxq_overflow;
+	struct sk_buff_head	txq_free;
+	struct sk_buff_head	txq;
+	struct sk_buff_head	txq_pend;
+
+	struct napi_struct	napi;
+
+	struct delayed_work	wq;
+
+	int			msg_enable;
+
+	struct urb		*urb_intr;
+	struct usb_anchor	deferred;
+
+	struct mutex		dev_mutex; /* serialise open/stop wrt suspend/resume */
+	struct mutex		phy_mutex; /* for phy access */
+	unsigned int		pipe_in, pipe_out, pipe_intr;
+
+	unsigned int		bulk_in_delay;
+	unsigned int		burst_cap;
+
+	unsigned long		flags;
+
+	wait_queue_head_t	*wait;
+	unsigned char		suspend_count;
+
+	unsigned int		maxpacket;
+	struct timer_list	stat_monitor;
+
+	unsigned long		data[5];
+
+	int			link_on;
+	u8			mdix_ctrl;
+
+	u32			chipid;
+	u32			chiprev;
+	struct mii_bus		*mdiobus;
+	phy_interface_t		interface;
+
+	int			fc_autoneg;
+	u8			fc_request_control;
+
+	int			delta;
+	struct statstage	stats;
+
+	struct irq_domain_data	domain_data;
+};
+
+/* define external phy id */
+#define	PHY_LAN8835			(0x0007C130)
+#define	PHY_KSZ9031RNX			(0x00221620)
+
+/* use ethtool to change the level for any given device */
+static int msg_level = -1;
+module_param(msg_level, int, 0);
+MODULE_PARM_DESC(msg_level, "Override default message level");
+
+static struct sk_buff *lan78xx_get_buf(struct sk_buff_head *buf_pool)
+{
+	if (skb_queue_empty(buf_pool))
+		return NULL;
+
+	return skb_dequeue(buf_pool);
+}
+
+static void lan78xx_release_buf(struct sk_buff_head *buf_pool,
+				struct sk_buff *buf)
+{
+	buf->data = buf->head;
+	skb_reset_tail_pointer(buf);
+
+	buf->len = 0;
+	buf->data_len = 0;
+
+	skb_queue_tail(buf_pool, buf);
+}
+
+static void lan78xx_free_buf_pool(struct sk_buff_head *buf_pool)
+{
+	struct skb_data *entry;
+	struct sk_buff *buf;
+
+	while (!skb_queue_empty(buf_pool)) {
+		buf = skb_dequeue(buf_pool);
+		if (buf) {
+			entry = (struct skb_data *)buf->cb;
+			usb_free_urb(entry->urb);
+			dev_kfree_skb_any(buf);
+		}
+	}
+}
+
+static int lan78xx_alloc_buf_pool(struct sk_buff_head *buf_pool,
+				  size_t n_urbs, size_t urb_size,
+				  struct lan78xx_net *dev)
+{
+	struct skb_data *entry;
+	struct sk_buff *buf;
+	struct urb *urb;
+	int i;
+
+	skb_queue_head_init(buf_pool);
+
+	for (i = 0; i < n_urbs; i++) {
+		buf = alloc_skb(urb_size, GFP_ATOMIC);
+		if (!buf)
+			goto error;
+
+		if (skb_linearize(buf) != 0) {
+			dev_kfree_skb_any(buf);
+			goto error;
+		}
+
+		urb = usb_alloc_urb(0, GFP_ATOMIC);
+		if (!urb) {
+			dev_kfree_skb_any(buf);
+			goto error;
+		}
+
+		entry = (struct skb_data *)buf->cb;
+		entry->urb = urb;
+		entry->dev = dev;
+		entry->length = 0;
+		entry->num_of_packet = 0;
+
+		skb_queue_tail(buf_pool, buf);
+	}
+
+	return 0;
+
+error:
+	lan78xx_free_buf_pool(buf_pool);
+
+	return -ENOMEM;
+}
+
+static struct sk_buff *lan78xx_get_rx_buf(struct lan78xx_net *dev)
+{
+	return lan78xx_get_buf(&dev->rxq_free);
+}
+
+static void lan78xx_release_rx_buf(struct lan78xx_net *dev,
+				   struct sk_buff *rx_buf)
+{
+	lan78xx_release_buf(&dev->rxq_free, rx_buf);
+}
+
+static void lan78xx_free_rx_resources(struct lan78xx_net *dev)
+{
+	lan78xx_free_buf_pool(&dev->rxq_free);
+}
+
+static int lan78xx_alloc_rx_resources(struct lan78xx_net *dev)
+{
+	return lan78xx_alloc_buf_pool(&dev->rxq_free,
+				      dev->n_rx_urbs, dev->rx_urb_size, dev);
+}
+
+static struct sk_buff *lan78xx_get_tx_buf(struct lan78xx_net *dev)
+{
+	return lan78xx_get_buf(&dev->txq_free);
+}
+
+static void lan78xx_release_tx_buf(struct lan78xx_net *dev,
+				   struct sk_buff *tx_buf)
+{
+	lan78xx_release_buf(&dev->txq_free, tx_buf);
+}
+
+static void lan78xx_free_tx_resources(struct lan78xx_net *dev)
+{
+	lan78xx_free_buf_pool(&dev->txq_free);
+}
+
+static int lan78xx_alloc_tx_resources(struct lan78xx_net *dev)
+{
+	return lan78xx_alloc_buf_pool(&dev->txq_free,
+				      dev->n_tx_urbs, dev->tx_urb_size, dev);
+}
+
+static int lan78xx_read_reg(struct lan78xx_net *dev, u32 index, u32 *data)
+{
+	u32 *buf;
+	int ret;
+
+	if (test_bit(EVENT_DEV_DISCONNECT, &dev->flags))
+		return -ENODEV;
+
+	buf = kmalloc(sizeof(u32), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+			      USB_VENDOR_REQUEST_READ_REGISTER,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, index, buf, 4, USB_CTRL_GET_TIMEOUT);
+	if (likely(ret >= 0)) {
+		le32_to_cpus(buf);
+		*data = *buf;
+	} else if (net_ratelimit()) {
+		netdev_warn(dev->net,
+			    "Failed to read register index 0x%08x. ret = %d",
+			    index, ret);
+	}
+
+	kfree(buf);
+
+	return ret;
+}
+
+static int lan78xx_write_reg(struct lan78xx_net *dev, u32 index, u32 data)
+{
+	u32 *buf;
+	int ret;
+
+	if (test_bit(EVENT_DEV_DISCONNECT, &dev->flags))
+		return -ENODEV;
+
+	buf = kmalloc(sizeof(u32), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	*buf = data;
+	cpu_to_le32s(buf);
+
+	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+			      USB_VENDOR_REQUEST_WRITE_REGISTER,
+			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, index, buf, 4, USB_CTRL_SET_TIMEOUT);
+	if (unlikely(ret < 0) &&
+	    net_ratelimit()) {
+		netdev_warn(dev->net,
+			    "Failed to write register index 0x%08x. ret = %d",
+			    index, ret);
+	}
+
+	kfree(buf);
+
+	return ret;
+}
+
+static int lan78xx_update_reg(struct lan78xx_net *dev, u32 reg, u32 mask,
+			      u32 data)
+{
+	int ret;
+	u32 buf;
+
+	ret = lan78xx_read_reg(dev, reg, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf &= ~mask;
+	buf |= (mask & data);
+
+	ret = lan78xx_write_reg(dev, reg, buf);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int lan78xx_read_stats(struct lan78xx_net *dev,
+			      struct lan78xx_statstage *data)
+{
+	int ret = 0;
+	int i;
+	struct lan78xx_statstage *stats;
+	u32 *src;
+	u32 *dst;
+
+	stats = kmalloc(sizeof(*stats), GFP_KERNEL);
+	if (!stats)
+		return -ENOMEM;
+
+	ret = usb_control_msg(dev->udev,
+			      usb_rcvctrlpipe(dev->udev, 0),
+			      USB_VENDOR_REQUEST_GET_STATS,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0,
+			      0,
+			      (void *)stats,
+			      sizeof(*stats),
+			      USB_CTRL_SET_TIMEOUT);
+	if (likely(ret >= 0)) {
+		src = (u32 *)stats;
+		dst = (u32 *)data;
+		for (i = 0; i < sizeof(*stats) / sizeof(u32); i++) {
+			le32_to_cpus(&src[i]);
+			dst[i] = src[i];
+		}
+	} else {
+		netdev_warn(dev->net,
+			    "Failed to read stat ret = %d", ret);
+	}
+
+	kfree(stats);
+
+	return ret;
+}
+
+#define check_counter_rollover(struct1, dev_stats, member)		\
+	do {								\
+		if ((struct1)->member < (dev_stats).saved.member)	\
+			(dev_stats).rollover_count.member++;		\
+	} while (0)
+
+static void lan78xx_check_stat_rollover(struct lan78xx_net *dev,
+					struct lan78xx_statstage *stats)
+{
+	check_counter_rollover(stats, dev->stats, rx_fcs_errors);
+	check_counter_rollover(stats, dev->stats, rx_alignment_errors);
+	check_counter_rollover(stats, dev->stats, rx_fragment_errors);
+	check_counter_rollover(stats, dev->stats, rx_jabber_errors);
+	check_counter_rollover(stats, dev->stats, rx_undersize_frame_errors);
+	check_counter_rollover(stats, dev->stats, rx_oversize_frame_errors);
+	check_counter_rollover(stats, dev->stats, rx_dropped_frames);
+	check_counter_rollover(stats, dev->stats, rx_unicast_byte_count);
+	check_counter_rollover(stats, dev->stats, rx_broadcast_byte_count);
+	check_counter_rollover(stats, dev->stats, rx_multicast_byte_count);
+	check_counter_rollover(stats, dev->stats, rx_unicast_frames);
+	check_counter_rollover(stats, dev->stats, rx_broadcast_frames);
+	check_counter_rollover(stats, dev->stats, rx_multicast_frames);
+	check_counter_rollover(stats, dev->stats, rx_pause_frames);
+	check_counter_rollover(stats, dev->stats, rx_64_byte_frames);
+	check_counter_rollover(stats, dev->stats, rx_65_127_byte_frames);
+	check_counter_rollover(stats, dev->stats, rx_128_255_byte_frames);
+	check_counter_rollover(stats, dev->stats, rx_256_511_bytes_frames);
+	check_counter_rollover(stats, dev->stats, rx_512_1023_byte_frames);
+	check_counter_rollover(stats, dev->stats, rx_1024_1518_byte_frames);
+	check_counter_rollover(stats, dev->stats, rx_greater_1518_byte_frames);
+	check_counter_rollover(stats, dev->stats, eee_rx_lpi_transitions);
+	check_counter_rollover(stats, dev->stats, eee_rx_lpi_time);
+	check_counter_rollover(stats, dev->stats, tx_fcs_errors);
+	check_counter_rollover(stats, dev->stats, tx_excess_deferral_errors);
+	check_counter_rollover(stats, dev->stats, tx_carrier_errors);
+	check_counter_rollover(stats, dev->stats, tx_bad_byte_count);
+	check_counter_rollover(stats, dev->stats, tx_single_collisions);
+	check_counter_rollover(stats, dev->stats, tx_multiple_collisions);
+	check_counter_rollover(stats, dev->stats, tx_excessive_collision);
+	check_counter_rollover(stats, dev->stats, tx_late_collisions);
+	check_counter_rollover(stats, dev->stats, tx_unicast_byte_count);
+	check_counter_rollover(stats, dev->stats, tx_broadcast_byte_count);
+	check_counter_rollover(stats, dev->stats, tx_multicast_byte_count);
+	check_counter_rollover(stats, dev->stats, tx_unicast_frames);
+	check_counter_rollover(stats, dev->stats, tx_broadcast_frames);
+	check_counter_rollover(stats, dev->stats, tx_multicast_frames);
+	check_counter_rollover(stats, dev->stats, tx_pause_frames);
+	check_counter_rollover(stats, dev->stats, tx_64_byte_frames);
+	check_counter_rollover(stats, dev->stats, tx_65_127_byte_frames);
+	check_counter_rollover(stats, dev->stats, tx_128_255_byte_frames);
+	check_counter_rollover(stats, dev->stats, tx_256_511_bytes_frames);
+	check_counter_rollover(stats, dev->stats, tx_512_1023_byte_frames);
+	check_counter_rollover(stats, dev->stats, tx_1024_1518_byte_frames);
+	check_counter_rollover(stats, dev->stats, tx_greater_1518_byte_frames);
+	check_counter_rollover(stats, dev->stats, eee_tx_lpi_transitions);
+	check_counter_rollover(stats, dev->stats, eee_tx_lpi_time);
+
+	memcpy(&dev->stats.saved, stats, sizeof(struct lan78xx_statstage));
+}
+
+static void lan78xx_update_stats(struct lan78xx_net *dev)
+{
+	u32 *p, *count, *max;
+	u64 *data;
+	int i;
+	struct lan78xx_statstage lan78xx_stats;
+
+	if (usb_autopm_get_interface(dev->intf) < 0)
+		return;
+
+	p = (u32 *)&lan78xx_stats;
+	count = (u32 *)&dev->stats.rollover_count;
+	max = (u32 *)&dev->stats.rollover_max;
+	data = (u64 *)&dev->stats.curr_stat;
+
+	mutex_lock(&dev->stats.access_lock);
+
+	if (lan78xx_read_stats(dev, &lan78xx_stats) > 0)
+		lan78xx_check_stat_rollover(dev, &lan78xx_stats);
+
+	for (i = 0; i < (sizeof(lan78xx_stats) / (sizeof(u32))); i++)
+		data[i] = (u64)p[i] + ((u64)count[i] * ((u64)max[i] + 1));
+
+	mutex_unlock(&dev->stats.access_lock);
+
+	usb_autopm_put_interface(dev->intf);
+}
+
+/* Loop until the read is completed with timeout called with phy_mutex held */
+static int lan78xx_phy_wait_not_busy(struct lan78xx_net *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = lan78xx_read_reg(dev, MII_ACC, &val);
+		if (unlikely(ret < 0))
+			return -EIO;
+
+		if (!(val & MII_ACC_MII_BUSY_))
+			return 0;
+	} while (!time_after(jiffies, start_time + HZ));
+
+	return -EIO;
+}
+
+static inline u32 mii_access(int id, int index, int read)
+{
+	u32 ret;
+
+	ret = ((u32)id << MII_ACC_PHY_ADDR_SHIFT_) & MII_ACC_PHY_ADDR_MASK_;
+	ret |= ((u32)index << MII_ACC_MIIRINDA_SHIFT_) & MII_ACC_MIIRINDA_MASK_;
+	if (read)
+		ret |= MII_ACC_MII_READ_;
+	else
+		ret |= MII_ACC_MII_WRITE_;
+	ret |= MII_ACC_MII_BUSY_;
+
+	return ret;
+}
+
+static int lan78xx_wait_eeprom(struct lan78xx_net *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = lan78xx_read_reg(dev, E2P_CMD, &val);
+		if (unlikely(ret < 0))
+			return -EIO;
+
+		if (!(val & E2P_CMD_EPC_BUSY_) ||
+		    (val & E2P_CMD_EPC_TIMEOUT_))
+			break;
+		usleep_range(40, 100);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	if (val & (E2P_CMD_EPC_TIMEOUT_ | E2P_CMD_EPC_BUSY_)) {
+		netdev_warn(dev->net, "EEPROM read operation timeout");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int lan78xx_eeprom_confirm_not_busy(struct lan78xx_net *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = lan78xx_read_reg(dev, E2P_CMD, &val);
+		if (unlikely(ret < 0))
+			return -EIO;
+
+		if (!(val & E2P_CMD_EPC_BUSY_))
+			return 0;
+
+		usleep_range(40, 100);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	netdev_warn(dev->net, "EEPROM is busy");
+	return -EIO;
+}
+
+static int lan78xx_read_raw_eeprom(struct lan78xx_net *dev, u32 offset,
+				   u32 length, u8 *data)
+{
+	u32 val;
+	u32 saved;
+	int i, ret;
+	int retval;
+
+	/* depends on chip, some EEPROM pins are muxed with LED function.
+	 * disable & restore LED function to access EEPROM.
+	 */
+	ret = lan78xx_read_reg(dev, HW_CFG, &val);
+	saved = val;
+	if (dev->chipid == ID_REV_CHIP_ID_7800_) {
+		val &= ~(HW_CFG_LED1_EN_ | HW_CFG_LED0_EN_);
+		ret = lan78xx_write_reg(dev, HW_CFG, val);
+	}
+
+	retval = lan78xx_eeprom_confirm_not_busy(dev);
+	if (retval)
+		return retval;
+
+	for (i = 0; i < length; i++) {
+		val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_READ_;
+		val |= (offset & E2P_CMD_EPC_ADDR_MASK_);
+		ret = lan78xx_write_reg(dev, E2P_CMD, val);
+		if (unlikely(ret < 0)) {
+			retval = -EIO;
+			goto exit;
+		}
+
+		retval = lan78xx_wait_eeprom(dev);
+		if (retval < 0)
+			goto exit;
+
+		ret = lan78xx_read_reg(dev, E2P_DATA, &val);
+		if (unlikely(ret < 0)) {
+			retval = -EIO;
+			goto exit;
+		}
+
+		data[i] = val & 0xFF;
+		offset++;
+	}
+
+	retval = 0;
+exit:
+	if (dev->chipid == ID_REV_CHIP_ID_7800_)
+		ret = lan78xx_write_reg(dev, HW_CFG, saved);
+
+	return retval;
+}
+
+static int lan78xx_read_eeprom(struct lan78xx_net *dev, u32 offset,
+			       u32 length, u8 *data)
+{
+	u8 sig;
+	int ret;
+
+	ret = lan78xx_read_raw_eeprom(dev, 0, 1, &sig);
+	if ((ret == 0) && (sig == EEPROM_INDICATOR))
+		ret = lan78xx_read_raw_eeprom(dev, offset, length, data);
+	else
+		ret = -EINVAL;
+
+	return ret;
+}
+
+static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset,
+				    u32 length, u8 *data)
+{
+	u32 val;
+	u32 saved;
+	int i, ret;
+	int retval;
+
+	/* depends on chip, some EEPROM pins are muxed with LED function.
+	 * disable & restore LED function to access EEPROM.
+	 */
+	ret = lan78xx_read_reg(dev, HW_CFG, &val);
+	saved = val;
+	if (dev->chipid == ID_REV_CHIP_ID_7800_) {
+		val &= ~(HW_CFG_LED1_EN_ | HW_CFG_LED0_EN_);
+		ret = lan78xx_write_reg(dev, HW_CFG, val);
+	}
+
+	retval = lan78xx_eeprom_confirm_not_busy(dev);
+	if (retval)
+		goto exit;
+
+	/* Issue write/erase enable command */
+	val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_EWEN_;
+	ret = lan78xx_write_reg(dev, E2P_CMD, val);
+	if (unlikely(ret < 0)) {
+		retval = -EIO;
+		goto exit;
+	}
+
+	retval = lan78xx_wait_eeprom(dev);
+	if (retval < 0)
+		goto exit;
+
+	for (i = 0; i < length; i++) {
+		/* Fill data register */
+		val = data[i];
+		ret = lan78xx_write_reg(dev, E2P_DATA, val);
+		if (ret < 0) {
+			retval = -EIO;
+			goto exit;
+		}
+
+		/* Send "write" command */
+		val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_WRITE_;
+		val |= (offset & E2P_CMD_EPC_ADDR_MASK_);
+		ret = lan78xx_write_reg(dev, E2P_CMD, val);
+		if (ret < 0) {
+			retval = -EIO;
+			goto exit;
+		}
+
+		retval = lan78xx_wait_eeprom(dev);
+		if (retval < 0)
+			goto exit;
+
+		offset++;
+	}
+
+	retval = 0;
+exit:
+	if (dev->chipid == ID_REV_CHIP_ID_7800_)
+		ret = lan78xx_write_reg(dev, HW_CFG, saved);
+
+	return retval;
+}
+
+static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
+				u32 length, u8 *data)
+{
+	int i;
+	u32 buf;
+	unsigned long timeout;
+
+	lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
+
+	if (buf & OTP_PWR_DN_PWRDN_N_) {
+		/* clear it and wait to be cleared */
+		lan78xx_write_reg(dev, OTP_PWR_DN, 0);
+
+		timeout = jiffies + HZ;
+		do {
+			usleep_range(1, 10);
+			lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
+			if (time_after(jiffies, timeout)) {
+				netdev_warn(dev->net,
+					    "timeout on OTP_PWR_DN");
+				return -EIO;
+			}
+		} while (buf & OTP_PWR_DN_PWRDN_N_);
+	}
+
+	for (i = 0; i < length; i++) {
+		lan78xx_write_reg(dev, OTP_ADDR1,
+				  ((offset + i) >> 8) & OTP_ADDR1_15_11);
+		lan78xx_write_reg(dev, OTP_ADDR2,
+				  ((offset + i) & OTP_ADDR2_10_3));
+
+		lan78xx_write_reg(dev, OTP_FUNC_CMD, OTP_FUNC_CMD_READ_);
+		lan78xx_write_reg(dev, OTP_CMD_GO, OTP_CMD_GO_GO_);
+
+		timeout = jiffies + HZ;
+		do {
+			udelay(1);
+			lan78xx_read_reg(dev, OTP_STATUS, &buf);
+			if (time_after(jiffies, timeout)) {
+				netdev_warn(dev->net,
+					    "timeout on OTP_STATUS");
+				return -EIO;
+			}
+		} while (buf & OTP_STATUS_BUSY_);
+
+		lan78xx_read_reg(dev, OTP_RD_DATA, &buf);
+
+		data[i] = (u8)(buf & 0xFF);
+	}
+
+	return 0;
+}
+
+static int lan78xx_write_raw_otp(struct lan78xx_net *dev, u32 offset,
+				 u32 length, u8 *data)
+{
+	int i;
+	u32 buf;
+	unsigned long timeout;
+
+	lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
+
+	if (buf & OTP_PWR_DN_PWRDN_N_) {
+		/* clear it and wait to be cleared */
+		lan78xx_write_reg(dev, OTP_PWR_DN, 0);
+
+		timeout = jiffies + HZ;
+		do {
+			udelay(1);
+			lan78xx_read_reg(dev, OTP_PWR_DN, &buf);
+			if (time_after(jiffies, timeout)) {
+				netdev_warn(dev->net,
+					    "timeout on OTP_PWR_DN completion");
+				return -EIO;
+			}
+		} while (buf & OTP_PWR_DN_PWRDN_N_);
+	}
+
+	/* set to BYTE program mode */
+	lan78xx_write_reg(dev, OTP_PRGM_MODE, OTP_PRGM_MODE_BYTE_);
+
+	for (i = 0; i < length; i++) {
+		lan78xx_write_reg(dev, OTP_ADDR1,
+				  ((offset + i) >> 8) & OTP_ADDR1_15_11);
+		lan78xx_write_reg(dev, OTP_ADDR2,
+				  ((offset + i) & OTP_ADDR2_10_3));
+		lan78xx_write_reg(dev, OTP_PRGM_DATA, data[i]);
+		lan78xx_write_reg(dev, OTP_TST_CMD, OTP_TST_CMD_PRGVRFY_);
+		lan78xx_write_reg(dev, OTP_CMD_GO, OTP_CMD_GO_GO_);
+
+		timeout = jiffies + HZ;
+		do {
+			udelay(1);
+			lan78xx_read_reg(dev, OTP_STATUS, &buf);
+			if (time_after(jiffies, timeout)) {
+				netdev_warn(dev->net,
+					    "Timeout on OTP_STATUS completion");
+				return -EIO;
+			}
+		} while (buf & OTP_STATUS_BUSY_);
+	}
+
+	return 0;
+}
+
+static int lan78xx_read_otp(struct lan78xx_net *dev, u32 offset,
+			    u32 length, u8 *data)
+{
+	u8 sig;
+	int ret;
+
+	ret = lan78xx_read_raw_otp(dev, 0, 1, &sig);
+
+	if (ret == 0) {
+		if (sig == OTP_INDICATOR_2)
+			offset += 0x100;
+		else if (sig != OTP_INDICATOR_1)
+			ret = -EINVAL;
+		if (!ret)
+			ret = lan78xx_read_raw_otp(dev, offset, length, data);
+	}
+
+	return ret;
+}
+
+static int lan78xx_dataport_wait_not_busy(struct lan78xx_net *dev)
+{
+	int i, ret;
+
+	for (i = 0; i < 100; i++) {
+		u32 dp_sel;
+
+		ret = lan78xx_read_reg(dev, DP_SEL, &dp_sel);
+		if (unlikely(ret < 0))
+			return -EIO;
+
+		if (dp_sel & DP_SEL_DPRDY_)
+			return 0;
+
+		usleep_range(40, 100);
+	}
+
+	netdev_warn(dev->net, "%s timed out", __func__);
+
+	return -EIO;
+}
+
+static int lan78xx_dataport_write(struct lan78xx_net *dev, u32 ram_select,
+				  u32 addr, u32 length, u32 *buf)
+{
+	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+	u32 dp_sel;
+	int i, ret;
+
+	if (usb_autopm_get_interface(dev->intf) < 0)
+		return 0;
+
+	mutex_lock(&pdata->dataport_mutex);
+
+	ret = lan78xx_dataport_wait_not_busy(dev);
+	if (ret < 0)
+		goto done;
+
+	ret = lan78xx_read_reg(dev, DP_SEL, &dp_sel);
+
+	dp_sel &= ~DP_SEL_RSEL_MASK_;
+	dp_sel |= ram_select;
+	ret = lan78xx_write_reg(dev, DP_SEL, dp_sel);
+
+	for (i = 0; i < length; i++) {
+		ret = lan78xx_write_reg(dev, DP_ADDR, addr + i);
+
+		ret = lan78xx_write_reg(dev, DP_DATA, buf[i]);
+
+		ret = lan78xx_write_reg(dev, DP_CMD, DP_CMD_WRITE_);
+
+		ret = lan78xx_dataport_wait_not_busy(dev);
+		if (ret < 0)
+			goto done;
+	}
+
+done:
+	mutex_unlock(&pdata->dataport_mutex);
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static void lan78xx_set_addr_filter(struct lan78xx_priv *pdata,
+				    int index, u8 addr[ETH_ALEN])
+{
+	u32 temp;
+
+	if ((pdata) && (index > 0) && (index < NUM_OF_MAF)) {
+		temp = addr[3];
+		temp = addr[2] | (temp << 8);
+		temp = addr[1] | (temp << 8);
+		temp = addr[0] | (temp << 8);
+		pdata->pfilter_table[index][1] = temp;
+		temp = addr[5];
+		temp = addr[4] | (temp << 8);
+		temp |= MAF_HI_VALID_ | MAF_HI_TYPE_DST_;
+		pdata->pfilter_table[index][0] = temp;
+	}
+}
+
+/* returns hash bit number for given MAC address */
+static inline u32 lan78xx_hash(char addr[ETH_ALEN])
+{
+	return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
+}
+
+static void lan78xx_deferred_multicast_write(struct work_struct *param)
+{
+	struct lan78xx_priv *pdata =
+			container_of(param, struct lan78xx_priv, set_multicast);
+	struct lan78xx_net *dev = pdata->dev;
+	int i;
+
+	netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x\n",
+		  pdata->rfe_ctl);
+
+	lan78xx_dataport_write(dev, DP_SEL_RSEL_VLAN_DA_, DP_SEL_VHF_VLAN_LEN,
+			       DP_SEL_VHF_HASH_LEN, pdata->mchash_table);
+
+	for (i = 1; i < NUM_OF_MAF; i++) {
+		lan78xx_write_reg(dev, MAF_HI(i), 0);
+		lan78xx_write_reg(dev, MAF_LO(i),
+				  pdata->pfilter_table[i][1]);
+		lan78xx_write_reg(dev, MAF_HI(i),
+				  pdata->pfilter_table[i][0]);
+	}
+
+	lan78xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+}
+
+static void lan78xx_set_multicast(struct net_device *netdev)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+	pdata->rfe_ctl &= ~(RFE_CTL_UCAST_EN_ | RFE_CTL_MCAST_EN_ |
+			    RFE_CTL_DA_PERFECT_ | RFE_CTL_MCAST_HASH_);
+
+	for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
+		pdata->mchash_table[i] = 0;
+
+	/* pfilter_table[0] has own HW address */
+	for (i = 1; i < NUM_OF_MAF; i++) {
+		pdata->pfilter_table[i][0] = 0;
+		pdata->pfilter_table[i][1] = 0;
+	}
+
+	pdata->rfe_ctl |= RFE_CTL_BCAST_EN_;
+
+	if (dev->net->flags & IFF_PROMISC) {
+		netif_dbg(dev, drv, dev->net, "promiscuous mode enabled");
+		pdata->rfe_ctl |= RFE_CTL_MCAST_EN_ | RFE_CTL_UCAST_EN_;
+	} else {
+		if (dev->net->flags & IFF_ALLMULTI) {
+			netif_dbg(dev, drv, dev->net,
+				  "receive all multicast enabled");
+			pdata->rfe_ctl |= RFE_CTL_MCAST_EN_;
+		}
+	}
+
+	if (netdev_mc_count(dev->net)) {
+		struct netdev_hw_addr *ha;
+		int i;
+
+		netif_dbg(dev, drv, dev->net, "receive multicast hash filter");
+
+		pdata->rfe_ctl |= RFE_CTL_DA_PERFECT_;
+
+		i = 1;
+		netdev_for_each_mc_addr(ha, netdev) {
+			/* set first 32 into Perfect Filter */
+			if (i < 33) {
+				lan78xx_set_addr_filter(pdata, i, ha->addr);
+			} else {
+				u32 bitnum = lan78xx_hash(ha->addr);
+
+				pdata->mchash_table[bitnum / 32] |=
+							(1 << (bitnum % 32));
+				pdata->rfe_ctl |= RFE_CTL_MCAST_HASH_;
+			}
+			i++;
+		}
+	}
+
+	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+	/* defer register writes to a sleepable context */
+	schedule_work(&pdata->set_multicast);
+}
+
+static int lan78xx_update_flowcontrol(struct lan78xx_net *dev, u8 duplex,
+				      u16 lcladv, u16 rmtadv)
+{
+	u32 flow = 0, fct_flow = 0;
+	u8 cap;
+
+	if (dev->fc_autoneg)
+		cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+	else
+		cap = dev->fc_request_control;
+
+	if (cap & FLOW_CTRL_TX)
+		flow |= (FLOW_CR_TX_FCEN_ | 0xFFFF);
+
+	if (cap & FLOW_CTRL_RX)
+		flow |= FLOW_CR_RX_FCEN_;
+
+	if (dev->udev->speed == USB_SPEED_SUPER)
+		fct_flow = FLOW_CTRL_THRESHOLD(FLOW_ON_SS, FLOW_OFF_SS);
+	else if (dev->udev->speed == USB_SPEED_HIGH)
+		fct_flow = FLOW_CTRL_THRESHOLD(FLOW_ON_HS, FLOW_OFF_HS);
+
+	netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s",
+		  (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
+		  (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+
+	lan78xx_write_reg(dev, FCT_FLOW, fct_flow);
+
+	/* threshold value should be set before enabling flow */
+	lan78xx_write_reg(dev, FLOW, flow);
+
+	return 0;
+}
+
+static void lan78xx_rx_urb_submit_all(struct lan78xx_net *dev);
+
+static int lan78xx_mac_reset(struct lan78xx_net *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* Resetting the device while there is activity on the MDIO
+	 * bus can result in the MAC interface locking up and not
+	 * completing register access transactions.
+	 */
+	ret = lan78xx_phy_wait_not_busy(dev);
+	if (ret < 0)
+		goto done;
+
+	ret = lan78xx_read_reg(dev, MAC_CR, &val);
+	if (ret < 0)
+		goto done;
+
+	val |= MAC_CR_RST_;
+	ret = lan78xx_write_reg(dev, MAC_CR, val);
+	if (ret < 0)
+		goto done;
+
+	/* Wait for the reset to complete before allowing any further
+	 * MAC register accesses otherwise the MAC may lock up.
+	 */
+	do {
+		ret = lan78xx_read_reg(dev, MAC_CR, &val);
+		if (ret < 0)
+			goto done;
+
+		if (!(val & MAC_CR_RST_)) {
+			ret = 0;
+			goto done;
+		}
+	} while (!time_after(jiffies, start_time + HZ));
+
+	ret = -ETIMEDOUT;
+done:
+	mutex_unlock(&dev->phy_mutex);
+
+	return ret;
+}
+
+static int lan78xx_link_reset(struct lan78xx_net *dev)
+{
+	struct phy_device *phydev = dev->net->phydev;
+	struct ethtool_link_ksettings ecmd;
+	int ladv, radv, ret, link;
+	u32 buf;
+
+	/* clear LAN78xx interrupt status */
+	ret = lan78xx_write_reg(dev, INT_STS, INT_STS_PHY_INT_);
+	if (unlikely(ret < 0))
+		return ret;
+
+	mutex_lock(&phydev->lock);
+	phy_read_status(phydev);
+	link = phydev->link;
+	mutex_unlock(&phydev->lock);
+
+	if (!link && dev->link_on) {
+		dev->link_on = false;
+
+		/* reset MAC */
+		ret = lan78xx_mac_reset(dev);
+		if (ret < 0)
+			return ret;
+
+		del_timer(&dev->stat_monitor);
+	} else if (link && !dev->link_on) {
+		dev->link_on = true;
+
+		phy_ethtool_ksettings_get(phydev, &ecmd);
+
+		if (dev->udev->speed == USB_SPEED_SUPER) {
+			if (ecmd.base.speed == 1000) {
+				/* disable U2 */
+				ret = lan78xx_read_reg(dev, USB_CFG1, &buf);
+				if (ret < 0)
+					return ret;
+				buf &= ~USB_CFG1_DEV_U2_INIT_EN_;
+				ret = lan78xx_write_reg(dev, USB_CFG1, buf);
+				if (ret < 0)
+					return ret;
+				/* enable U1 */
+				ret = lan78xx_read_reg(dev, USB_CFG1, &buf);
+				if (ret < 0)
+					return ret;
+				buf |= USB_CFG1_DEV_U1_INIT_EN_;
+				ret = lan78xx_write_reg(dev, USB_CFG1, buf);
+				if (ret < 0)
+					return ret;
+			} else {
+				/* enable U1 & U2 */
+				ret = lan78xx_read_reg(dev, USB_CFG1, &buf);
+				if (ret < 0)
+					return ret;
+				buf |= USB_CFG1_DEV_U2_INIT_EN_;
+				buf |= USB_CFG1_DEV_U1_INIT_EN_;
+				ret = lan78xx_write_reg(dev, USB_CFG1, buf);
+				if (ret < 0)
+					return ret;
+			}
+		}
+
+		ladv = phy_read(phydev, MII_ADVERTISE);
+		if (ladv < 0)
+			return ladv;
+
+		radv = phy_read(phydev, MII_LPA);
+		if (radv < 0)
+			return radv;
+
+		netif_dbg(dev, link, dev->net,
+			  "speed: %u duplex: %d anadv: 0x%04x anlpa: 0x%04x",
+			  ecmd.base.speed, ecmd.base.duplex, ladv, radv);
+
+		ret = lan78xx_update_flowcontrol(dev, ecmd.base.duplex, ladv,
+						 radv);
+		if (ret < 0)
+			return ret;
+
+		if (!timer_pending(&dev->stat_monitor)) {
+			dev->delta = 1;
+			mod_timer(&dev->stat_monitor,
+				  jiffies + STAT_UPDATE_TIMER);
+		}
+
+		lan78xx_rx_urb_submit_all(dev);
+
+		napi_schedule(&dev->napi);
+	}
+
+	return 0;
+}
+
+/* some work can't be done in tasklets, so we use keventd
+ *
+ * NOTE:  annoying asymmetry:  if it's active, schedule_work() fails,
+ * but tasklet_schedule() doesn't.	hope the failure is rare.
+ */
+static void lan78xx_defer_kevent(struct lan78xx_net *dev, int work)
+{
+	set_bit(work, &dev->flags);
+	if (!schedule_delayed_work(&dev->wq, 0))
+		netdev_err(dev->net, "kevent %d may have been dropped\n", work);
+}
+
+static void lan78xx_status(struct lan78xx_net *dev, struct urb *urb)
+{
+	u32 intdata;
+
+	if (urb->actual_length != 4) {
+		netdev_warn(dev->net,
+			    "unexpected urb length %d", urb->actual_length);
+		return;
+	}
+
+	intdata = get_unaligned_le32(urb->transfer_buffer);
+
+	if (intdata & INT_ENP_PHY_INT) {
+		netif_dbg(dev, link, dev->net, "PHY INTR: 0x%08x\n", intdata);
+		lan78xx_defer_kevent(dev, EVENT_LINK_RESET);
+
+		if (dev->domain_data.phyirq > 0)
+			generic_handle_irq_safe(dev->domain_data.phyirq);
+	} else {
+		netdev_warn(dev->net,
+			    "unexpected interrupt: 0x%08x\n", intdata);
+	}
+}
+
+static int lan78xx_ethtool_get_eeprom_len(struct net_device *netdev)
+{
+	return MAX_EEPROM_SIZE;
+}
+
+static int lan78xx_ethtool_get_eeprom(struct net_device *netdev,
+				      struct ethtool_eeprom *ee, u8 *data)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	int ret;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret)
+		return ret;
+
+	ee->magic = LAN78XX_EEPROM_MAGIC;
+
+	ret = lan78xx_read_raw_eeprom(dev, ee->offset, ee->len, data);
+
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static int lan78xx_ethtool_set_eeprom(struct net_device *netdev,
+				      struct ethtool_eeprom *ee, u8 *data)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	int ret;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret)
+		return ret;
+
+	/* Invalid EEPROM_INDICATOR at offset zero will result in a failure
+	 * to load data from EEPROM
+	 */
+	if (ee->magic == LAN78XX_EEPROM_MAGIC)
+		ret = lan78xx_write_raw_eeprom(dev, ee->offset, ee->len, data);
+	else if ((ee->magic == LAN78XX_OTP_MAGIC) &&
+		 (ee->offset == 0) &&
+		 (ee->len == 512) &&
+		 (data[0] == OTP_INDICATOR_1))
+		ret = lan78xx_write_raw_otp(dev, ee->offset, ee->len, data);
+
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static void lan78xx_get_strings(struct net_device *netdev, u32 stringset,
+				u8 *data)
+{
+	if (stringset == ETH_SS_STATS)
+		memcpy(data, lan78xx_gstrings, sizeof(lan78xx_gstrings));
+}
+
+static int lan78xx_get_sset_count(struct net_device *netdev, int sset)
+{
+	if (sset == ETH_SS_STATS)
+		return ARRAY_SIZE(lan78xx_gstrings);
+	else
+		return -EOPNOTSUPP;
+}
+
+static void lan78xx_get_stats(struct net_device *netdev,
+			      struct ethtool_stats *stats, u64 *data)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+
+	lan78xx_update_stats(dev);
+
+	mutex_lock(&dev->stats.access_lock);
+	memcpy(data, &dev->stats.curr_stat, sizeof(dev->stats.curr_stat));
+	mutex_unlock(&dev->stats.access_lock);
+}
+
+static void lan78xx_get_wol(struct net_device *netdev,
+			    struct ethtool_wolinfo *wol)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	int ret;
+	u32 buf;
+	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+
+	if (usb_autopm_get_interface(dev->intf) < 0)
+		return;
+
+	ret = lan78xx_read_reg(dev, USB_CFG0, &buf);
+	if (unlikely(ret < 0)) {
+		wol->supported = 0;
+		wol->wolopts = 0;
+	} else {
+		if (buf & USB_CFG_RMT_WKP_) {
+			wol->supported = WAKE_ALL;
+			wol->wolopts = pdata->wol;
+		} else {
+			wol->supported = 0;
+			wol->wolopts = 0;
+		}
+	}
+
+	usb_autopm_put_interface(dev->intf);
+}
+
+static int lan78xx_set_wol(struct net_device *netdev,
+			   struct ethtool_wolinfo *wol)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+	int ret;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret < 0)
+		return ret;
+
+	if (wol->wolopts & ~WAKE_ALL)
+		return -EINVAL;
+
+	pdata->wol = wol->wolopts;
+
+	device_set_wakeup_enable(&dev->udev->dev, (bool)wol->wolopts);
+
+	phy_ethtool_set_wol(netdev->phydev, wol);
+
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static int lan78xx_get_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+	struct phy_device *phydev = net->phydev;
+	int ret;
+	u32 buf;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_ethtool_get_eee(phydev, edata);
+	if (ret < 0)
+		goto exit;
+
+	ret = lan78xx_read_reg(dev, MAC_CR, &buf);
+	if (buf & MAC_CR_EEE_EN_) {
+		edata->eee_enabled = true;
+		edata->eee_active = !!(edata->advertised &
+				       edata->lp_advertised);
+		edata->tx_lpi_enabled = true;
+		/* EEE_TX_LPI_REQ_DLY & tx_lpi_timer are same uSec unit */
+		ret = lan78xx_read_reg(dev, EEE_TX_LPI_REQ_DLY, &buf);
+		edata->tx_lpi_timer = buf;
+	} else {
+		edata->eee_enabled = false;
+		edata->eee_active = false;
+		edata->tx_lpi_enabled = false;
+		edata->tx_lpi_timer = 0;
+	}
+
+	ret = 0;
+exit:
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static int lan78xx_set_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+	int ret;
+	u32 buf;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret < 0)
+		return ret;
+
+	if (edata->eee_enabled) {
+		ret = lan78xx_read_reg(dev, MAC_CR, &buf);
+		buf |= MAC_CR_EEE_EN_;
+		ret = lan78xx_write_reg(dev, MAC_CR, buf);
+
+		phy_ethtool_set_eee(net->phydev, edata);
+
+		buf = (u32)edata->tx_lpi_timer;
+		ret = lan78xx_write_reg(dev, EEE_TX_LPI_REQ_DLY, buf);
+	} else {
+		ret = lan78xx_read_reg(dev, MAC_CR, &buf);
+		buf &= ~MAC_CR_EEE_EN_;
+		ret = lan78xx_write_reg(dev, MAC_CR, buf);
+	}
+
+	usb_autopm_put_interface(dev->intf);
+
+	return 0;
+}
+
+static u32 lan78xx_get_link(struct net_device *net)
+{
+	u32 link;
+
+	mutex_lock(&net->phydev->lock);
+	phy_read_status(net->phydev);
+	link = net->phydev->link;
+	mutex_unlock(&net->phydev->lock);
+
+	return link;
+}
+
+static void lan78xx_get_drvinfo(struct net_device *net,
+				struct ethtool_drvinfo *info)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+
+	strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+	usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
+}
+
+static u32 lan78xx_get_msglevel(struct net_device *net)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+
+	return dev->msg_enable;
+}
+
+static void lan78xx_set_msglevel(struct net_device *net, u32 level)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+
+	dev->msg_enable = level;
+}
+
+static int lan78xx_get_link_ksettings(struct net_device *net,
+				      struct ethtool_link_ksettings *cmd)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+	struct phy_device *phydev = net->phydev;
+	int ret;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret < 0)
+		return ret;
+
+	phy_ethtool_ksettings_get(phydev, cmd);
+
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static int lan78xx_set_link_ksettings(struct net_device *net,
+				      const struct ethtool_link_ksettings *cmd)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+	struct phy_device *phydev = net->phydev;
+	int ret = 0;
+	int temp;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret < 0)
+		return ret;
+
+	/* change speed & duplex */
+	ret = phy_ethtool_ksettings_set(phydev, cmd);
+
+	if (!cmd->base.autoneg) {
+		/* force link down */
+		temp = phy_read(phydev, MII_BMCR);
+		phy_write(phydev, MII_BMCR, temp | BMCR_LOOPBACK);
+		mdelay(1);
+		phy_write(phydev, MII_BMCR, temp);
+	}
+
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static void lan78xx_get_pause(struct net_device *net,
+			      struct ethtool_pauseparam *pause)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+	struct phy_device *phydev = net->phydev;
+	struct ethtool_link_ksettings ecmd;
+
+	phy_ethtool_ksettings_get(phydev, &ecmd);
+
+	pause->autoneg = dev->fc_autoneg;
+
+	if (dev->fc_request_control & FLOW_CTRL_TX)
+		pause->tx_pause = 1;
+
+	if (dev->fc_request_control & FLOW_CTRL_RX)
+		pause->rx_pause = 1;
+}
+
+static int lan78xx_set_pause(struct net_device *net,
+			     struct ethtool_pauseparam *pause)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+	struct phy_device *phydev = net->phydev;
+	struct ethtool_link_ksettings ecmd;
+	int ret;
+
+	phy_ethtool_ksettings_get(phydev, &ecmd);
+
+	if (pause->autoneg && !ecmd.base.autoneg) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	dev->fc_request_control = 0;
+	if (pause->rx_pause)
+		dev->fc_request_control |= FLOW_CTRL_RX;
+
+	if (pause->tx_pause)
+		dev->fc_request_control |= FLOW_CTRL_TX;
+
+	if (ecmd.base.autoneg) {
+		__ETHTOOL_DECLARE_LINK_MODE_MASK(fc) = { 0, };
+		u32 mii_adv;
+
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+				   ecmd.link_modes.advertising);
+		linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+				   ecmd.link_modes.advertising);
+		mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control);
+		mii_adv_to_linkmode_adv_t(fc, mii_adv);
+		linkmode_or(ecmd.link_modes.advertising, fc,
+			    ecmd.link_modes.advertising);
+
+		phy_ethtool_ksettings_set(phydev, &ecmd);
+	}
+
+	dev->fc_autoneg = pause->autoneg;
+
+	ret = 0;
+exit:
+	return ret;
+}
+
+static int lan78xx_get_regs_len(struct net_device *netdev)
+{
+	if (!netdev->phydev)
+		return (sizeof(lan78xx_regs));
+	else
+		return (sizeof(lan78xx_regs) + PHY_REG_SIZE);
+}
+
+static void
+lan78xx_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+		 void *buf)
+{
+	u32 *data = buf;
+	int i, j;
+	struct lan78xx_net *dev = netdev_priv(netdev);
+
+	/* Read Device/MAC registers */
+	for (i = 0; i < ARRAY_SIZE(lan78xx_regs); i++)
+		lan78xx_read_reg(dev, lan78xx_regs[i], &data[i]);
+
+	if (!netdev->phydev)
+		return;
+
+	/* Read PHY registers */
+	for (j = 0; j < 32; i++, j++)
+		data[i] = phy_read(netdev->phydev, j);
+}
+
+static const struct ethtool_ops lan78xx_ethtool_ops = {
+	.get_link	= lan78xx_get_link,
+	.nway_reset	= phy_ethtool_nway_reset,
+	.get_drvinfo	= lan78xx_get_drvinfo,
+	.get_msglevel	= lan78xx_get_msglevel,
+	.set_msglevel	= lan78xx_set_msglevel,
+	.get_eeprom_len = lan78xx_ethtool_get_eeprom_len,
+	.get_eeprom	= lan78xx_ethtool_get_eeprom,
+	.set_eeprom	= lan78xx_ethtool_set_eeprom,
+	.get_ethtool_stats = lan78xx_get_stats,
+	.get_sset_count = lan78xx_get_sset_count,
+	.get_strings	= lan78xx_get_strings,
+	.get_wol	= lan78xx_get_wol,
+	.set_wol	= lan78xx_set_wol,
+	.get_ts_info	= ethtool_op_get_ts_info,
+	.get_eee	= lan78xx_get_eee,
+	.set_eee	= lan78xx_set_eee,
+	.get_pauseparam	= lan78xx_get_pause,
+	.set_pauseparam	= lan78xx_set_pause,
+	.get_link_ksettings = lan78xx_get_link_ksettings,
+	.set_link_ksettings = lan78xx_set_link_ksettings,
+	.get_regs_len	= lan78xx_get_regs_len,
+	.get_regs	= lan78xx_get_regs,
+};
+
+static void lan78xx_init_mac_address(struct lan78xx_net *dev)
+{
+	u32 addr_lo, addr_hi;
+	u8 addr[6];
+
+	lan78xx_read_reg(dev, RX_ADDRL, &addr_lo);
+	lan78xx_read_reg(dev, RX_ADDRH, &addr_hi);
+
+	addr[0] = addr_lo & 0xFF;
+	addr[1] = (addr_lo >> 8) & 0xFF;
+	addr[2] = (addr_lo >> 16) & 0xFF;
+	addr[3] = (addr_lo >> 24) & 0xFF;
+	addr[4] = addr_hi & 0xFF;
+	addr[5] = (addr_hi >> 8) & 0xFF;
+
+	if (!is_valid_ether_addr(addr)) {
+		if (!eth_platform_get_mac_address(&dev->udev->dev, addr)) {
+			/* valid address present in Device Tree */
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from Device Tree");
+		} else if (((lan78xx_read_eeprom(dev, EEPROM_MAC_OFFSET,
+						 ETH_ALEN, addr) == 0) ||
+			    (lan78xx_read_otp(dev, EEPROM_MAC_OFFSET,
+					      ETH_ALEN, addr) == 0)) &&
+			   is_valid_ether_addr(addr)) {
+			/* eeprom values are valid so use them */
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from EEPROM");
+		} else {
+			/* generate random MAC */
+			eth_random_addr(addr);
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address set to random addr");
+		}
+
+		addr_lo = addr[0] | (addr[1] << 8) |
+			  (addr[2] << 16) | (addr[3] << 24);
+		addr_hi = addr[4] | (addr[5] << 8);
+
+		lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
+		lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
+	}
+
+	lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
+	lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
+
+	eth_hw_addr_set(dev->net, addr);
+}
+
+/* MDIO read and write wrappers for phylib */
+static int lan78xx_mdiobus_read(struct mii_bus *bus, int phy_id, int idx)
+{
+	struct lan78xx_net *dev = bus->priv;
+	u32 val, addr;
+	int ret;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = lan78xx_phy_wait_not_busy(dev);
+	if (ret < 0)
+		goto done;
+
+	/* set the address, index & direction (read from PHY) */
+	addr = mii_access(phy_id, idx, MII_READ);
+	ret = lan78xx_write_reg(dev, MII_ACC, addr);
+
+	ret = lan78xx_phy_wait_not_busy(dev);
+	if (ret < 0)
+		goto done;
+
+	ret = lan78xx_read_reg(dev, MII_DATA, &val);
+
+	ret = (int)(val & 0xFFFF);
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static int lan78xx_mdiobus_write(struct mii_bus *bus, int phy_id, int idx,
+				 u16 regval)
+{
+	struct lan78xx_net *dev = bus->priv;
+	u32 val, addr;
+	int ret;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = lan78xx_phy_wait_not_busy(dev);
+	if (ret < 0)
+		goto done;
+
+	val = (u32)regval;
+	ret = lan78xx_write_reg(dev, MII_DATA, val);
+
+	/* set the address, index & direction (write to PHY) */
+	addr = mii_access(phy_id, idx, MII_WRITE);
+	ret = lan78xx_write_reg(dev, MII_ACC, addr);
+
+	ret = lan78xx_phy_wait_not_busy(dev);
+	if (ret < 0)
+		goto done;
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+	usb_autopm_put_interface(dev->intf);
+	return 0;
+}
+
+static int lan78xx_mdio_init(struct lan78xx_net *dev)
+{
+	struct device_node *node;
+	int ret;
+
+	dev->mdiobus = mdiobus_alloc();
+	if (!dev->mdiobus) {
+		netdev_err(dev->net, "can't allocate MDIO bus\n");
+		return -ENOMEM;
+	}
+
+	dev->mdiobus->priv = (void *)dev;
+	dev->mdiobus->read = lan78xx_mdiobus_read;
+	dev->mdiobus->write = lan78xx_mdiobus_write;
+	dev->mdiobus->name = "lan78xx-mdiobus";
+	dev->mdiobus->parent = &dev->udev->dev;
+
+	snprintf(dev->mdiobus->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
+		 dev->udev->bus->busnum, dev->udev->devnum);
+
+	switch (dev->chipid) {
+	case ID_REV_CHIP_ID_7800_:
+	case ID_REV_CHIP_ID_7850_:
+		/* set to internal PHY id */
+		dev->mdiobus->phy_mask = ~(1 << 1);
+		break;
+	case ID_REV_CHIP_ID_7801_:
+		/* scan thru PHYAD[2..0] */
+		dev->mdiobus->phy_mask = ~(0xFF);
+		break;
+	}
+
+	node = of_get_child_by_name(dev->udev->dev.of_node, "mdio");
+	ret = of_mdiobus_register(dev->mdiobus, node);
+	of_node_put(node);
+	if (ret) {
+		netdev_err(dev->net, "can't register MDIO bus\n");
+		goto exit1;
+	}
+
+	netdev_dbg(dev->net, "registered mdiobus bus %s\n", dev->mdiobus->id);
+	return 0;
+exit1:
+	mdiobus_free(dev->mdiobus);
+	return ret;
+}
+
+static void lan78xx_remove_mdio(struct lan78xx_net *dev)
+{
+	mdiobus_unregister(dev->mdiobus);
+	mdiobus_free(dev->mdiobus);
+}
+
+static void lan78xx_link_status_change(struct net_device *net)
+{
+	struct phy_device *phydev = net->phydev;
+
+	phy_print_status(phydev);
+}
+
+static int irq_map(struct irq_domain *d, unsigned int irq,
+		   irq_hw_number_t hwirq)
+{
+	struct irq_domain_data *data = d->host_data;
+
+	irq_set_chip_data(irq, data);
+	irq_set_chip_and_handler(irq, data->irqchip, data->irq_handler);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static void irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+	irq_set_chip_and_handler(irq, NULL, NULL);
+	irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops chip_domain_ops = {
+	.map	= irq_map,
+	.unmap	= irq_unmap,
+};
+
+static void lan78xx_irq_mask(struct irq_data *irqd)
+{
+	struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
+
+	data->irqenable &= ~BIT(irqd_to_hwirq(irqd));
+}
+
+static void lan78xx_irq_unmask(struct irq_data *irqd)
+{
+	struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
+
+	data->irqenable |= BIT(irqd_to_hwirq(irqd));
+}
+
+static void lan78xx_irq_bus_lock(struct irq_data *irqd)
+{
+	struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
+
+	mutex_lock(&data->irq_lock);
+}
+
+static void lan78xx_irq_bus_sync_unlock(struct irq_data *irqd)
+{
+	struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
+	struct lan78xx_net *dev =
+			container_of(data, struct lan78xx_net, domain_data);
+	u32 buf;
+
+	/* call register access here because irq_bus_lock & irq_bus_sync_unlock
+	 * are only two callbacks executed in non-atomic contex.
+	 */
+	lan78xx_read_reg(dev, INT_EP_CTL, &buf);
+	if (buf != data->irqenable)
+		lan78xx_write_reg(dev, INT_EP_CTL, data->irqenable);
+
+	mutex_unlock(&data->irq_lock);
+}
+
+static struct irq_chip lan78xx_irqchip = {
+	.name			= "lan78xx-irqs",
+	.irq_mask		= lan78xx_irq_mask,
+	.irq_unmask		= lan78xx_irq_unmask,
+	.irq_bus_lock		= lan78xx_irq_bus_lock,
+	.irq_bus_sync_unlock	= lan78xx_irq_bus_sync_unlock,
+};
+
+static int lan78xx_setup_irq_domain(struct lan78xx_net *dev)
+{
+	struct device_node *of_node;
+	struct irq_domain *irqdomain;
+	unsigned int irqmap = 0;
+	u32 buf;
+	int ret = 0;
+
+	of_node = dev->udev->dev.parent->of_node;
+
+	mutex_init(&dev->domain_data.irq_lock);
+
+	lan78xx_read_reg(dev, INT_EP_CTL, &buf);
+	dev->domain_data.irqenable = buf;
+
+	dev->domain_data.irqchip = &lan78xx_irqchip;
+	dev->domain_data.irq_handler = handle_simple_irq;
+
+	irqdomain = irq_domain_add_simple(of_node, MAX_INT_EP, 0,
+					  &chip_domain_ops, &dev->domain_data);
+	if (irqdomain) {
+		/* create mapping for PHY interrupt */
+		irqmap = irq_create_mapping(irqdomain, INT_EP_PHY);
+		if (!irqmap) {
+			irq_domain_remove(irqdomain);
+
+			irqdomain = NULL;
+			ret = -EINVAL;
+		}
+	} else {
+		ret = -EINVAL;
+	}
+
+	dev->domain_data.irqdomain = irqdomain;
+	dev->domain_data.phyirq = irqmap;
+
+	return ret;
+}
+
+static void lan78xx_remove_irq_domain(struct lan78xx_net *dev)
+{
+	if (dev->domain_data.phyirq > 0) {
+		irq_dispose_mapping(dev->domain_data.phyirq);
+
+		if (dev->domain_data.irqdomain)
+			irq_domain_remove(dev->domain_data.irqdomain);
+	}
+	dev->domain_data.phyirq = 0;
+	dev->domain_data.irqdomain = NULL;
+}
+
+static int lan8835_fixup(struct phy_device *phydev)
+{
+	int buf;
+	struct lan78xx_net *dev = netdev_priv(phydev->attached_dev);
+
+	/* LED2/PME_N/IRQ_N/RGMII_ID pin to IRQ_N mode */
+	buf = phy_read_mmd(phydev, MDIO_MMD_PCS, 0x8010);
+	buf &= ~0x1800;
+	buf |= 0x0800;
+	phy_write_mmd(phydev, MDIO_MMD_PCS, 0x8010, buf);
+
+	/* RGMII MAC TXC Delay Enable */
+	lan78xx_write_reg(dev, MAC_RGMII_ID,
+			  MAC_RGMII_ID_TXC_DELAY_EN_);
+
+	/* RGMII TX DLL Tune Adjust */
+	lan78xx_write_reg(dev, RGMII_TX_BYP_DLL, 0x3D00);
+
+	dev->interface = PHY_INTERFACE_MODE_RGMII_TXID;
+
+	return 1;
+}
+
+static int ksz9031rnx_fixup(struct phy_device *phydev)
+{
+	struct lan78xx_net *dev = netdev_priv(phydev->attached_dev);
+
+	/* Micrel9301RNX PHY configuration */
+	/* RGMII Control Signal Pad Skew */
+	phy_write_mmd(phydev, MDIO_MMD_WIS, 4, 0x0077);
+	/* RGMII RX Data Pad Skew */
+	phy_write_mmd(phydev, MDIO_MMD_WIS, 5, 0x7777);
+	/* RGMII RX Clock Pad Skew */
+	phy_write_mmd(phydev, MDIO_MMD_WIS, 8, 0x1FF);
+
+	dev->interface = PHY_INTERFACE_MODE_RGMII_RXID;
+
+	return 1;
+}
+
+static struct phy_device *lan7801_phy_init(struct lan78xx_net *dev)
+{
+	u32 buf;
+	int ret;
+	struct fixed_phy_status fphy_status = {
+		.link = 1,
+		.speed = SPEED_1000,
+		.duplex = DUPLEX_FULL,
+	};
+	struct phy_device *phydev;
+
+	phydev = phy_find_first(dev->mdiobus);
+	if (!phydev) {
+		netdev_dbg(dev->net, "PHY Not Found!! Registering Fixed PHY\n");
+		phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
+		if (IS_ERR(phydev)) {
+			netdev_err(dev->net, "No PHY/fixed_PHY found\n");
+			return NULL;
+		}
+		netdev_dbg(dev->net, "Registered FIXED PHY\n");
+		dev->interface = PHY_INTERFACE_MODE_RGMII;
+		ret = lan78xx_write_reg(dev, MAC_RGMII_ID,
+					MAC_RGMII_ID_TXC_DELAY_EN_);
+		ret = lan78xx_write_reg(dev, RGMII_TX_BYP_DLL, 0x3D00);
+		ret = lan78xx_read_reg(dev, HW_CFG, &buf);
+		buf |= HW_CFG_CLK125_EN_;
+		buf |= HW_CFG_REFCLK25_EN_;
+		ret = lan78xx_write_reg(dev, HW_CFG, buf);
+	} else {
+		if (!phydev->drv) {
+			netdev_err(dev->net, "no PHY driver found\n");
+			return NULL;
+		}
+		dev->interface = PHY_INTERFACE_MODE_RGMII;
+		/* external PHY fixup for KSZ9031RNX */
+		ret = phy_register_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0,
+						 ksz9031rnx_fixup);
+		if (ret < 0) {
+			netdev_err(dev->net, "Failed to register fixup for PHY_KSZ9031RNX\n");
+			return NULL;
+		}
+		/* external PHY fixup for LAN8835 */
+		ret = phy_register_fixup_for_uid(PHY_LAN8835, 0xfffffff0,
+						 lan8835_fixup);
+		if (ret < 0) {
+			netdev_err(dev->net, "Failed to register fixup for PHY_LAN8835\n");
+			return NULL;
+		}
+		/* add more external PHY fixup here if needed */
+
+		phydev->is_internal = false;
+	}
+	return phydev;
+}
+
+static int lan78xx_phy_init(struct lan78xx_net *dev)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(fc) = { 0, };
+	int ret;
+	u32 mii_adv;
+	struct phy_device *phydev;
+
+	switch (dev->chipid) {
+	case ID_REV_CHIP_ID_7801_:
+		phydev = lan7801_phy_init(dev);
+		if (!phydev) {
+			netdev_err(dev->net, "lan7801: PHY Init Failed");
+			return -EIO;
+		}
+		break;
+
+	case ID_REV_CHIP_ID_7800_:
+	case ID_REV_CHIP_ID_7850_:
+		phydev = phy_find_first(dev->mdiobus);
+		if (!phydev) {
+			netdev_err(dev->net, "no PHY found\n");
+			return -EIO;
+		}
+		phydev->is_internal = true;
+		dev->interface = PHY_INTERFACE_MODE_GMII;
+		break;
+
+	default:
+		netdev_err(dev->net, "Unknown CHIP ID found\n");
+		return -EIO;
+	}
+
+	/* if phyirq is not set, use polling mode in phylib */
+	if (dev->domain_data.phyirq > 0)
+		phydev->irq = dev->domain_data.phyirq;
+	else
+		phydev->irq = PHY_POLL;
+	netdev_dbg(dev->net, "phydev->irq = %d\n", phydev->irq);
+
+	/* set to AUTOMDIX */
+	phydev->mdix = ETH_TP_MDI_AUTO;
+
+	ret = phy_connect_direct(dev->net, phydev,
+				 lan78xx_link_status_change,
+				 dev->interface);
+	if (ret) {
+		netdev_err(dev->net, "can't attach PHY to %s\n",
+			   dev->mdiobus->id);
+		if (dev->chipid == ID_REV_CHIP_ID_7801_) {
+			if (phy_is_pseudo_fixed_link(phydev)) {
+				fixed_phy_unregister(phydev);
+			} else {
+				phy_unregister_fixup_for_uid(PHY_KSZ9031RNX,
+							     0xfffffff0);
+				phy_unregister_fixup_for_uid(PHY_LAN8835,
+							     0xfffffff0);
+			}
+		}
+		return -EIO;
+	}
+
+	/* MAC doesn't support 1000T Half */
+	phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
+
+	/* support both flow controls */
+	dev->fc_request_control = (FLOW_CTRL_RX | FLOW_CTRL_TX);
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+			   phydev->advertising);
+	linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+			   phydev->advertising);
+	mii_adv = (u32)mii_advertise_flowctrl(dev->fc_request_control);
+	mii_adv_to_linkmode_adv_t(fc, mii_adv);
+	linkmode_or(phydev->advertising, fc, phydev->advertising);
+
+	if (phydev->mdio.dev.of_node) {
+		u32 reg;
+		int len;
+
+		len = of_property_count_elems_of_size(phydev->mdio.dev.of_node,
+						      "microchip,led-modes",
+						      sizeof(u32));
+		if (len >= 0) {
+			/* Ensure the appropriate LEDs are enabled */
+			lan78xx_read_reg(dev, HW_CFG, &reg);
+			reg &= ~(HW_CFG_LED0_EN_ |
+				 HW_CFG_LED1_EN_ |
+				 HW_CFG_LED2_EN_ |
+				 HW_CFG_LED3_EN_);
+			reg |= (len > 0) * HW_CFG_LED0_EN_ |
+				(len > 1) * HW_CFG_LED1_EN_ |
+				(len > 2) * HW_CFG_LED2_EN_ |
+				(len > 3) * HW_CFG_LED3_EN_;
+			lan78xx_write_reg(dev, HW_CFG, reg);
+		}
+	}
+
+	genphy_config_aneg(phydev);
+
+	dev->fc_autoneg = phydev->autoneg;
+
+	return 0;
+}
+
+static int lan78xx_set_rx_max_frame_length(struct lan78xx_net *dev, int size)
+{
+	u32 buf;
+	bool rxenabled;
+
+	lan78xx_read_reg(dev, MAC_RX, &buf);
+
+	rxenabled = ((buf & MAC_RX_RXEN_) != 0);
+
+	if (rxenabled) {
+		buf &= ~MAC_RX_RXEN_;
+		lan78xx_write_reg(dev, MAC_RX, buf);
+	}
+
+	/* add 4 to size for FCS */
+	buf &= ~MAC_RX_MAX_SIZE_MASK_;
+	buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT_) & MAC_RX_MAX_SIZE_MASK_);
+
+	lan78xx_write_reg(dev, MAC_RX, buf);
+
+	if (rxenabled) {
+		buf |= MAC_RX_RXEN_;
+		lan78xx_write_reg(dev, MAC_RX, buf);
+	}
+
+	return 0;
+}
+
+static int unlink_urbs(struct lan78xx_net *dev, struct sk_buff_head *q)
+{
+	struct sk_buff *skb;
+	unsigned long flags;
+	int count = 0;
+
+	spin_lock_irqsave(&q->lock, flags);
+	while (!skb_queue_empty(q)) {
+		struct skb_data	*entry;
+		struct urb *urb;
+		int ret;
+
+		skb_queue_walk(q, skb) {
+			entry = (struct skb_data *)skb->cb;
+			if (entry->state != unlink_start)
+				goto found;
+		}
+		break;
+found:
+		entry->state = unlink_start;
+		urb = entry->urb;
+
+		/* Get reference count of the URB to avoid it to be
+		 * freed during usb_unlink_urb, which may trigger
+		 * use-after-free problem inside usb_unlink_urb since
+		 * usb_unlink_urb is always racing with .complete
+		 * handler(include defer_bh).
+		 */
+		usb_get_urb(urb);
+		spin_unlock_irqrestore(&q->lock, flags);
+		/* during some PM-driven resume scenarios,
+		 * these (async) unlinks complete immediately
+		 */
+		ret = usb_unlink_urb(urb);
+		if (ret != -EINPROGRESS && ret != 0)
+			netdev_dbg(dev->net, "unlink urb err, %d\n", ret);
+		else
+			count++;
+		usb_put_urb(urb);
+		spin_lock_irqsave(&q->lock, flags);
+	}
+	spin_unlock_irqrestore(&q->lock, flags);
+	return count;
+}
+
+static int lan78xx_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	int max_frame_len = RX_MAX_FRAME_LEN(new_mtu);
+	int ret;
+
+	/* no second zero-length packet read wanted after mtu-sized packets */
+	if ((max_frame_len % dev->maxpacket) == 0)
+		return -EDOM;
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_set_rx_max_frame_length(dev, max_frame_len);
+	if (!ret)
+		netdev->mtu = new_mtu;
+
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static int lan78xx_set_mac_addr(struct net_device *netdev, void *p)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+	u32 addr_lo, addr_hi;
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	eth_hw_addr_set(netdev, addr->sa_data);
+
+	addr_lo = netdev->dev_addr[0] |
+		  netdev->dev_addr[1] << 8 |
+		  netdev->dev_addr[2] << 16 |
+		  netdev->dev_addr[3] << 24;
+	addr_hi = netdev->dev_addr[4] |
+		  netdev->dev_addr[5] << 8;
+
+	lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
+	lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
+
+	/* Added to support MAC address changes */
+	lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
+	lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
+
+	return 0;
+}
+
+/* Enable or disable Rx checksum offload engine */
+static int lan78xx_set_features(struct net_device *netdev,
+				netdev_features_t features)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+	if (features & NETIF_F_RXCSUM) {
+		pdata->rfe_ctl |= RFE_CTL_TCPUDP_COE_ | RFE_CTL_IP_COE_;
+		pdata->rfe_ctl |= RFE_CTL_ICMP_COE_ | RFE_CTL_IGMP_COE_;
+	} else {
+		pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_COE_ | RFE_CTL_IP_COE_);
+		pdata->rfe_ctl &= ~(RFE_CTL_ICMP_COE_ | RFE_CTL_IGMP_COE_);
+	}
+
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
+		pdata->rfe_ctl |= RFE_CTL_VLAN_STRIP_;
+	else
+		pdata->rfe_ctl &= ~RFE_CTL_VLAN_STRIP_;
+
+	if (features & NETIF_F_HW_VLAN_CTAG_FILTER)
+		pdata->rfe_ctl |= RFE_CTL_VLAN_FILTER_;
+	else
+		pdata->rfe_ctl &= ~RFE_CTL_VLAN_FILTER_;
+
+	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+	lan78xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+
+	return 0;
+}
+
+static void lan78xx_deferred_vlan_write(struct work_struct *param)
+{
+	struct lan78xx_priv *pdata =
+			container_of(param, struct lan78xx_priv, set_vlan);
+	struct lan78xx_net *dev = pdata->dev;
+
+	lan78xx_dataport_write(dev, DP_SEL_RSEL_VLAN_DA_, 0,
+			       DP_SEL_VHF_VLAN_LEN, pdata->vlan_table);
+}
+
+static int lan78xx_vlan_rx_add_vid(struct net_device *netdev,
+				   __be16 proto, u16 vid)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+	u16 vid_bit_index;
+	u16 vid_dword_index;
+
+	vid_dword_index = (vid >> 5) & 0x7F;
+	vid_bit_index = vid & 0x1F;
+
+	pdata->vlan_table[vid_dword_index] |= (1 << vid_bit_index);
+
+	/* defer register writes to a sleepable context */
+	schedule_work(&pdata->set_vlan);
+
+	return 0;
+}
+
+static int lan78xx_vlan_rx_kill_vid(struct net_device *netdev,
+				    __be16 proto, u16 vid)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+	u16 vid_bit_index;
+	u16 vid_dword_index;
+
+	vid_dword_index = (vid >> 5) & 0x7F;
+	vid_bit_index = vid & 0x1F;
+
+	pdata->vlan_table[vid_dword_index] &= ~(1 << vid_bit_index);
+
+	/* defer register writes to a sleepable context */
+	schedule_work(&pdata->set_vlan);
+
+	return 0;
+}
+
+static void lan78xx_init_ltm(struct lan78xx_net *dev)
+{
+	int ret;
+	u32 buf;
+	u32 regs[6] = { 0 };
+
+	ret = lan78xx_read_reg(dev, USB_CFG1, &buf);
+	if (buf & USB_CFG1_LTM_ENABLE_) {
+		u8 temp[2];
+		/* Get values from EEPROM first */
+		if (lan78xx_read_eeprom(dev, 0x3F, 2, temp) == 0) {
+			if (temp[0] == 24) {
+				ret = lan78xx_read_raw_eeprom(dev,
+							      temp[1] * 2,
+							      24,
+							      (u8 *)regs);
+				if (ret < 0)
+					return;
+			}
+		} else if (lan78xx_read_otp(dev, 0x3F, 2, temp) == 0) {
+			if (temp[0] == 24) {
+				ret = lan78xx_read_raw_otp(dev,
+							   temp[1] * 2,
+							   24,
+							   (u8 *)regs);
+				if (ret < 0)
+					return;
+			}
+		}
+	}
+
+	lan78xx_write_reg(dev, LTM_BELT_IDLE0, regs[0]);
+	lan78xx_write_reg(dev, LTM_BELT_IDLE1, regs[1]);
+	lan78xx_write_reg(dev, LTM_BELT_ACT0, regs[2]);
+	lan78xx_write_reg(dev, LTM_BELT_ACT1, regs[3]);
+	lan78xx_write_reg(dev, LTM_INACTIVE0, regs[4]);
+	lan78xx_write_reg(dev, LTM_INACTIVE1, regs[5]);
+}
+
+static int lan78xx_urb_config_init(struct lan78xx_net *dev)
+{
+	int result = 0;
+
+	switch (dev->udev->speed) {
+	case USB_SPEED_SUPER:
+		dev->rx_urb_size = RX_SS_URB_SIZE;
+		dev->tx_urb_size = TX_SS_URB_SIZE;
+		dev->n_rx_urbs = RX_SS_URB_NUM;
+		dev->n_tx_urbs = TX_SS_URB_NUM;
+		dev->bulk_in_delay = SS_BULK_IN_DELAY;
+		dev->burst_cap = SS_BURST_CAP_SIZE / SS_USB_PKT_SIZE;
+		break;
+	case USB_SPEED_HIGH:
+		dev->rx_urb_size = RX_HS_URB_SIZE;
+		dev->tx_urb_size = TX_HS_URB_SIZE;
+		dev->n_rx_urbs = RX_HS_URB_NUM;
+		dev->n_tx_urbs = TX_HS_URB_NUM;
+		dev->bulk_in_delay = HS_BULK_IN_DELAY;
+		dev->burst_cap = HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+		break;
+	case USB_SPEED_FULL:
+		dev->rx_urb_size = RX_FS_URB_SIZE;
+		dev->tx_urb_size = TX_FS_URB_SIZE;
+		dev->n_rx_urbs = RX_FS_URB_NUM;
+		dev->n_tx_urbs = TX_FS_URB_NUM;
+		dev->bulk_in_delay = FS_BULK_IN_DELAY;
+		dev->burst_cap = FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+		break;
+	default:
+		netdev_warn(dev->net, "USB bus speed not supported\n");
+		result = -EIO;
+		break;
+	}
+
+	return result;
+}
+
+static int lan78xx_start_hw(struct lan78xx_net *dev, u32 reg, u32 hw_enable)
+{
+	return lan78xx_update_reg(dev, reg, hw_enable, hw_enable);
+}
+
+static int lan78xx_stop_hw(struct lan78xx_net *dev, u32 reg, u32 hw_enabled,
+			   u32 hw_disabled)
+{
+	unsigned long timeout;
+	bool stopped = true;
+	int ret;
+	u32 buf;
+
+	/* Stop the h/w block (if not already stopped) */
+
+	ret = lan78xx_read_reg(dev, reg, &buf);
+	if (ret < 0)
+		return ret;
+
+	if (buf & hw_enabled) {
+		buf &= ~hw_enabled;
+
+		ret = lan78xx_write_reg(dev, reg, buf);
+		if (ret < 0)
+			return ret;
+
+		stopped = false;
+		timeout = jiffies + HW_DISABLE_TIMEOUT;
+		do  {
+			ret = lan78xx_read_reg(dev, reg, &buf);
+			if (ret < 0)
+				return ret;
+
+			if (buf & hw_disabled)
+				stopped = true;
+			else
+				msleep(HW_DISABLE_DELAY_MS);
+		} while (!stopped && !time_after(jiffies, timeout));
+	}
+
+	ret = stopped ? 0 : -ETIME;
+
+	return ret;
+}
+
+static int lan78xx_flush_fifo(struct lan78xx_net *dev, u32 reg, u32 fifo_flush)
+{
+	return lan78xx_update_reg(dev, reg, fifo_flush, fifo_flush);
+}
+
+static int lan78xx_start_tx_path(struct lan78xx_net *dev)
+{
+	int ret;
+
+	netif_dbg(dev, drv, dev->net, "start tx path");
+
+	/* Start the MAC transmitter */
+
+	ret = lan78xx_start_hw(dev, MAC_TX, MAC_TX_TXEN_);
+	if (ret < 0)
+		return ret;
+
+	/* Start the Tx FIFO */
+
+	ret = lan78xx_start_hw(dev, FCT_TX_CTL, FCT_TX_CTL_EN_);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int lan78xx_stop_tx_path(struct lan78xx_net *dev)
+{
+	int ret;
+
+	netif_dbg(dev, drv, dev->net, "stop tx path");
+
+	/* Stop the Tx FIFO */
+
+	ret = lan78xx_stop_hw(dev, FCT_TX_CTL, FCT_TX_CTL_EN_, FCT_TX_CTL_DIS_);
+	if (ret < 0)
+		return ret;
+
+	/* Stop the MAC transmitter */
+
+	ret = lan78xx_stop_hw(dev, MAC_TX, MAC_TX_TXEN_, MAC_TX_TXD_);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/* The caller must ensure the Tx path is stopped before calling
+ * lan78xx_flush_tx_fifo().
+ */
+static int lan78xx_flush_tx_fifo(struct lan78xx_net *dev)
+{
+	return lan78xx_flush_fifo(dev, FCT_TX_CTL, FCT_TX_CTL_RST_);
+}
+
+static int lan78xx_start_rx_path(struct lan78xx_net *dev)
+{
+	int ret;
+
+	netif_dbg(dev, drv, dev->net, "start rx path");
+
+	/* Start the Rx FIFO */
+
+	ret = lan78xx_start_hw(dev, FCT_RX_CTL, FCT_RX_CTL_EN_);
+	if (ret < 0)
+		return ret;
+
+	/* Start the MAC receiver*/
+
+	ret = lan78xx_start_hw(dev, MAC_RX, MAC_RX_RXEN_);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int lan78xx_stop_rx_path(struct lan78xx_net *dev)
+{
+	int ret;
+
+	netif_dbg(dev, drv, dev->net, "stop rx path");
+
+	/* Stop the MAC receiver */
+
+	ret = lan78xx_stop_hw(dev, MAC_RX, MAC_RX_RXEN_, MAC_RX_RXD_);
+	if (ret < 0)
+		return ret;
+
+	/* Stop the Rx FIFO */
+
+	ret = lan78xx_stop_hw(dev, FCT_RX_CTL, FCT_RX_CTL_EN_, FCT_RX_CTL_DIS_);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+/* The caller must ensure the Rx path is stopped before calling
+ * lan78xx_flush_rx_fifo().
+ */
+static int lan78xx_flush_rx_fifo(struct lan78xx_net *dev)
+{
+	return lan78xx_flush_fifo(dev, FCT_RX_CTL, FCT_RX_CTL_RST_);
+}
+
+static int lan78xx_reset(struct lan78xx_net *dev)
+{
+	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+	unsigned long timeout;
+	int ret;
+	u32 buf;
+	u8 sig;
+
+	ret = lan78xx_read_reg(dev, HW_CFG, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf |= HW_CFG_LRST_;
+
+	ret = lan78xx_write_reg(dev, HW_CFG, buf);
+	if (ret < 0)
+		return ret;
+
+	timeout = jiffies + HZ;
+	do {
+		mdelay(1);
+		ret = lan78xx_read_reg(dev, HW_CFG, &buf);
+		if (ret < 0)
+			return ret;
+
+		if (time_after(jiffies, timeout)) {
+			netdev_warn(dev->net,
+				    "timeout on completion of LiteReset");
+			ret = -ETIMEDOUT;
+			return ret;
+		}
+	} while (buf & HW_CFG_LRST_);
+
+	lan78xx_init_mac_address(dev);
+
+	/* save DEVID for later usage */
+	ret = lan78xx_read_reg(dev, ID_REV, &buf);
+	if (ret < 0)
+		return ret;
+
+	dev->chipid = (buf & ID_REV_CHIP_ID_MASK_) >> 16;
+	dev->chiprev = buf & ID_REV_CHIP_REV_MASK_;
+
+	/* Respond to the IN token with a NAK */
+	ret = lan78xx_read_reg(dev, USB_CFG0, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf |= USB_CFG_BIR_;
+
+	ret = lan78xx_write_reg(dev, USB_CFG0, buf);
+	if (ret < 0)
+		return ret;
+
+	/* Init LTM */
+	lan78xx_init_ltm(dev);
+
+	ret = lan78xx_write_reg(dev, BURST_CAP, dev->burst_cap);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_write_reg(dev, BULK_IN_DLY, dev->bulk_in_delay);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_read_reg(dev, HW_CFG, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf |= HW_CFG_MEF_;
+
+	ret = lan78xx_write_reg(dev, HW_CFG, buf);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_read_reg(dev, USB_CFG0, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf |= USB_CFG_BCE_;
+
+	ret = lan78xx_write_reg(dev, USB_CFG0, buf);
+	if (ret < 0)
+		return ret;
+
+	/* set FIFO sizes */
+	buf = (MAX_RX_FIFO_SIZE - 512) / 512;
+
+	ret = lan78xx_write_reg(dev, FCT_RX_FIFO_END, buf);
+	if (ret < 0)
+		return ret;
+
+	buf = (MAX_TX_FIFO_SIZE - 512) / 512;
+
+	ret = lan78xx_write_reg(dev, FCT_TX_FIFO_END, buf);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_write_reg(dev, FLOW, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_write_reg(dev, FCT_FLOW, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Don't need rfe_ctl_lock during initialisation */
+	ret = lan78xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+	if (ret < 0)
+		return ret;
+
+	pdata->rfe_ctl |= RFE_CTL_BCAST_EN_ | RFE_CTL_DA_PERFECT_;
+
+	ret = lan78xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	if (ret < 0)
+		return ret;
+
+	/* Enable or disable checksum offload engines */
+	ret = lan78xx_set_features(dev->net, dev->net->features);
+	if (ret < 0)
+		return ret;
+
+	lan78xx_set_multicast(dev->net);
+
+	/* reset PHY */
+	ret = lan78xx_read_reg(dev, PMT_CTL, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf |= PMT_CTL_PHY_RST_;
+
+	ret = lan78xx_write_reg(dev, PMT_CTL, buf);
+	if (ret < 0)
+		return ret;
+
+	timeout = jiffies + HZ;
+	do {
+		mdelay(1);
+		ret = lan78xx_read_reg(dev, PMT_CTL, &buf);
+		if (ret < 0)
+			return ret;
+
+		if (time_after(jiffies, timeout)) {
+			netdev_warn(dev->net, "timeout waiting for PHY Reset");
+			ret = -ETIMEDOUT;
+			return ret;
+		}
+	} while ((buf & PMT_CTL_PHY_RST_) || !(buf & PMT_CTL_READY_));
+
+	ret = lan78xx_read_reg(dev, MAC_CR, &buf);
+	if (ret < 0)
+		return ret;
+
+	/* LAN7801 only has RGMII mode */
+	if (dev->chipid == ID_REV_CHIP_ID_7801_)
+		buf &= ~MAC_CR_GMII_EN_;
+
+	if (dev->chipid == ID_REV_CHIP_ID_7800_) {
+		ret = lan78xx_read_raw_eeprom(dev, 0, 1, &sig);
+		if (!ret && sig != EEPROM_INDICATOR) {
+			/* Implies there is no external eeprom. Set mac speed */
+			netdev_info(dev->net, "No External EEPROM. Setting MAC Speed\n");
+			buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
+		}
+	}
+	ret = lan78xx_write_reg(dev, MAC_CR, buf);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_set_rx_max_frame_length(dev,
+					      RX_MAX_FRAME_LEN(dev->net->mtu));
+
+	return ret;
+}
+
+static void lan78xx_init_stats(struct lan78xx_net *dev)
+{
+	u32 *p;
+	int i;
+
+	/* initialize for stats update
+	 * some counters are 20bits and some are 32bits
+	 */
+	p = (u32 *)&dev->stats.rollover_max;
+	for (i = 0; i < (sizeof(dev->stats.rollover_max) / (sizeof(u32))); i++)
+		p[i] = 0xFFFFF;
+
+	dev->stats.rollover_max.rx_unicast_byte_count = 0xFFFFFFFF;
+	dev->stats.rollover_max.rx_broadcast_byte_count = 0xFFFFFFFF;
+	dev->stats.rollover_max.rx_multicast_byte_count = 0xFFFFFFFF;
+	dev->stats.rollover_max.eee_rx_lpi_transitions = 0xFFFFFFFF;
+	dev->stats.rollover_max.eee_rx_lpi_time = 0xFFFFFFFF;
+	dev->stats.rollover_max.tx_unicast_byte_count = 0xFFFFFFFF;
+	dev->stats.rollover_max.tx_broadcast_byte_count = 0xFFFFFFFF;
+	dev->stats.rollover_max.tx_multicast_byte_count = 0xFFFFFFFF;
+	dev->stats.rollover_max.eee_tx_lpi_transitions = 0xFFFFFFFF;
+	dev->stats.rollover_max.eee_tx_lpi_time = 0xFFFFFFFF;
+
+	set_bit(EVENT_STAT_UPDATE, &dev->flags);
+}
+
+static int lan78xx_open(struct net_device *net)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+	int ret;
+
+	netif_dbg(dev, ifup, dev->net, "open device");
+
+	ret = usb_autopm_get_interface(dev->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&dev->dev_mutex);
+
+	phy_start(net->phydev);
+
+	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
+
+	/* for Link Check */
+	if (dev->urb_intr) {
+		ret = usb_submit_urb(dev->urb_intr, GFP_KERNEL);
+		if (ret < 0) {
+			netif_err(dev, ifup, dev->net,
+				  "intr submit %d\n", ret);
+			goto done;
+		}
+	}
+
+	ret = lan78xx_flush_rx_fifo(dev);
+	if (ret < 0)
+		goto done;
+	ret = lan78xx_flush_tx_fifo(dev);
+	if (ret < 0)
+		goto done;
+
+	ret = lan78xx_start_tx_path(dev);
+	if (ret < 0)
+		goto done;
+	ret = lan78xx_start_rx_path(dev);
+	if (ret < 0)
+		goto done;
+
+	lan78xx_init_stats(dev);
+
+	set_bit(EVENT_DEV_OPEN, &dev->flags);
+
+	netif_start_queue(net);
+
+	dev->link_on = false;
+
+	napi_enable(&dev->napi);
+
+	lan78xx_defer_kevent(dev, EVENT_LINK_RESET);
+done:
+	mutex_unlock(&dev->dev_mutex);
+
+	usb_autopm_put_interface(dev->intf);
+
+	return ret;
+}
+
+static void lan78xx_terminate_urbs(struct lan78xx_net *dev)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(unlink_wakeup);
+	DECLARE_WAITQUEUE(wait, current);
+	int temp;
+
+	/* ensure there are no more active urbs */
+	add_wait_queue(&unlink_wakeup, &wait);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	dev->wait = &unlink_wakeup;
+	temp = unlink_urbs(dev, &dev->txq) + unlink_urbs(dev, &dev->rxq);
+
+	/* maybe wait for deletions to finish. */
+	while (!skb_queue_empty(&dev->rxq) ||
+	       !skb_queue_empty(&dev->txq)) {
+		schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		netif_dbg(dev, ifdown, dev->net,
+			  "waited for %d urb completions", temp);
+	}
+	set_current_state(TASK_RUNNING);
+	dev->wait = NULL;
+	remove_wait_queue(&unlink_wakeup, &wait);
+
+	/* empty Rx done, Rx overflow and Tx pend queues
+	 */
+	while (!skb_queue_empty(&dev->rxq_done)) {
+		struct sk_buff *skb = skb_dequeue(&dev->rxq_done);
+
+		lan78xx_release_rx_buf(dev, skb);
+	}
+
+	skb_queue_purge(&dev->rxq_overflow);
+	skb_queue_purge(&dev->txq_pend);
+}
+
+static int lan78xx_stop(struct net_device *net)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+
+	netif_dbg(dev, ifup, dev->net, "stop device");
+
+	mutex_lock(&dev->dev_mutex);
+
+	if (timer_pending(&dev->stat_monitor))
+		del_timer_sync(&dev->stat_monitor);
+
+	clear_bit(EVENT_DEV_OPEN, &dev->flags);
+	netif_stop_queue(net);
+	napi_disable(&dev->napi);
+
+	lan78xx_terminate_urbs(dev);
+
+	netif_info(dev, ifdown, dev->net,
+		   "stop stats: rx/tx %lu/%lu, errs %lu/%lu\n",
+		   net->stats.rx_packets, net->stats.tx_packets,
+		   net->stats.rx_errors, net->stats.tx_errors);
+
+	/* ignore errors that occur stopping the Tx and Rx data paths */
+	lan78xx_stop_tx_path(dev);
+	lan78xx_stop_rx_path(dev);
+
+	if (net->phydev)
+		phy_stop(net->phydev);
+
+	usb_kill_urb(dev->urb_intr);
+
+	/* deferred work (task, timer, softirq) must also stop.
+	 * can't flush_scheduled_work() until we drop rtnl (later),
+	 * else workers could deadlock; so make workers a NOP.
+	 */
+	clear_bit(EVENT_TX_HALT, &dev->flags);
+	clear_bit(EVENT_RX_HALT, &dev->flags);
+	clear_bit(EVENT_LINK_RESET, &dev->flags);
+	clear_bit(EVENT_STAT_UPDATE, &dev->flags);
+
+	cancel_delayed_work_sync(&dev->wq);
+
+	usb_autopm_put_interface(dev->intf);
+
+	mutex_unlock(&dev->dev_mutex);
+
+	return 0;
+}
+
+static enum skb_state defer_bh(struct lan78xx_net *dev, struct sk_buff *skb,
+			       struct sk_buff_head *list, enum skb_state state)
+{
+	unsigned long flags;
+	enum skb_state old_state;
+	struct skb_data *entry = (struct skb_data *)skb->cb;
+
+	spin_lock_irqsave(&list->lock, flags);
+	old_state = entry->state;
+	entry->state = state;
+
+	__skb_unlink(skb, list);
+	spin_unlock(&list->lock);
+	spin_lock(&dev->rxq_done.lock);
+
+	__skb_queue_tail(&dev->rxq_done, skb);
+	if (skb_queue_len(&dev->rxq_done) == 1)
+		napi_schedule(&dev->napi);
+
+	spin_unlock_irqrestore(&dev->rxq_done.lock, flags);
+
+	return old_state;
+}
+
+static void tx_complete(struct urb *urb)
+{
+	struct sk_buff *skb = (struct sk_buff *)urb->context;
+	struct skb_data *entry = (struct skb_data *)skb->cb;
+	struct lan78xx_net *dev = entry->dev;
+
+	if (urb->status == 0) {
+		dev->net->stats.tx_packets += entry->num_of_packet;
+		dev->net->stats.tx_bytes += entry->length;
+	} else {
+		dev->net->stats.tx_errors += entry->num_of_packet;
+
+		switch (urb->status) {
+		case -EPIPE:
+			lan78xx_defer_kevent(dev, EVENT_TX_HALT);
+			break;
+
+		/* software-driven interface shutdown */
+		case -ECONNRESET:
+		case -ESHUTDOWN:
+			netif_dbg(dev, tx_err, dev->net,
+				  "tx err interface gone %d\n",
+				  entry->urb->status);
+			break;
+
+		case -EPROTO:
+		case -ETIME:
+		case -EILSEQ:
+			netif_stop_queue(dev->net);
+			netif_dbg(dev, tx_err, dev->net,
+				  "tx err queue stopped %d\n",
+				  entry->urb->status);
+			break;
+		default:
+			netif_dbg(dev, tx_err, dev->net,
+				  "unknown tx err %d\n",
+				  entry->urb->status);
+			break;
+		}
+	}
+
+	usb_autopm_put_interface_async(dev->intf);
+
+	skb_unlink(skb, &dev->txq);
+
+	lan78xx_release_tx_buf(dev, skb);
+
+	/* Re-schedule NAPI if Tx data pending but no URBs in progress.
+	 */
+	if (skb_queue_empty(&dev->txq) &&
+	    !skb_queue_empty(&dev->txq_pend))
+		napi_schedule(&dev->napi);
+}
+
+static void lan78xx_queue_skb(struct sk_buff_head *list,
+			      struct sk_buff *newsk, enum skb_state state)
+{
+	struct skb_data *entry = (struct skb_data *)newsk->cb;
+
+	__skb_queue_tail(list, newsk);
+	entry->state = state;
+}
+
+static unsigned int lan78xx_tx_urb_space(struct lan78xx_net *dev)
+{
+	return skb_queue_len(&dev->txq_free) * dev->tx_urb_size;
+}
+
+static unsigned int lan78xx_tx_pend_data_len(struct lan78xx_net *dev)
+{
+	return dev->tx_pend_data_len;
+}
+
+static void lan78xx_tx_pend_skb_add(struct lan78xx_net *dev,
+				    struct sk_buff *skb,
+				    unsigned int *tx_pend_data_len)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->txq_pend.lock, flags);
+
+	__skb_queue_tail(&dev->txq_pend, skb);
+
+	dev->tx_pend_data_len += skb->len;
+	*tx_pend_data_len = dev->tx_pend_data_len;
+
+	spin_unlock_irqrestore(&dev->txq_pend.lock, flags);
+}
+
+static void lan78xx_tx_pend_skb_head_add(struct lan78xx_net *dev,
+					 struct sk_buff *skb,
+					 unsigned int *tx_pend_data_len)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->txq_pend.lock, flags);
+
+	__skb_queue_head(&dev->txq_pend, skb);
+
+	dev->tx_pend_data_len += skb->len;
+	*tx_pend_data_len = dev->tx_pend_data_len;
+
+	spin_unlock_irqrestore(&dev->txq_pend.lock, flags);
+}
+
+static void lan78xx_tx_pend_skb_get(struct lan78xx_net *dev,
+				    struct sk_buff **skb,
+				    unsigned int *tx_pend_data_len)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->txq_pend.lock, flags);
+
+	*skb = __skb_dequeue(&dev->txq_pend);
+	if (*skb)
+		dev->tx_pend_data_len -= (*skb)->len;
+	*tx_pend_data_len = dev->tx_pend_data_len;
+
+	spin_unlock_irqrestore(&dev->txq_pend.lock, flags);
+}
+
+static netdev_tx_t
+lan78xx_start_xmit(struct sk_buff *skb, struct net_device *net)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+	unsigned int tx_pend_data_len;
+
+	if (test_bit(EVENT_DEV_ASLEEP, &dev->flags))
+		schedule_delayed_work(&dev->wq, 0);
+
+	skb_tx_timestamp(skb);
+
+	lan78xx_tx_pend_skb_add(dev, skb, &tx_pend_data_len);
+
+	/* Set up a Tx URB if none is in progress */
+
+	if (skb_queue_empty(&dev->txq))
+		napi_schedule(&dev->napi);
+
+	/* Stop stack Tx queue if we have enough data to fill
+	 * all the free Tx URBs.
+	 */
+	if (tx_pend_data_len > lan78xx_tx_urb_space(dev)) {
+		netif_stop_queue(net);
+
+		netif_dbg(dev, hw, dev->net, "tx data len: %u, urb space %u",
+			  tx_pend_data_len, lan78xx_tx_urb_space(dev));
+
+		/* Kick off transmission of pending data */
+
+		if (!skb_queue_empty(&dev->txq_free))
+			napi_schedule(&dev->napi);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf)
+{
+	struct lan78xx_priv *pdata = NULL;
+	int ret;
+	int i;
+
+	dev->data[0] = (unsigned long)kzalloc(sizeof(*pdata), GFP_KERNEL);
+
+	pdata = (struct lan78xx_priv *)(dev->data[0]);
+	if (!pdata) {
+		netdev_warn(dev->net, "Unable to allocate lan78xx_priv");
+		return -ENOMEM;
+	}
+
+	pdata->dev = dev;
+
+	spin_lock_init(&pdata->rfe_ctl_lock);
+	mutex_init(&pdata->dataport_mutex);
+
+	INIT_WORK(&pdata->set_multicast, lan78xx_deferred_multicast_write);
+
+	for (i = 0; i < DP_SEL_VHF_VLAN_LEN; i++)
+		pdata->vlan_table[i] = 0;
+
+	INIT_WORK(&pdata->set_vlan, lan78xx_deferred_vlan_write);
+
+	dev->net->features = 0;
+
+	if (DEFAULT_TX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_HW_CSUM;
+
+	if (DEFAULT_RX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_RXCSUM;
+
+	if (DEFAULT_TSO_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG;
+
+	if (DEFAULT_VLAN_RX_OFFLOAD)
+		dev->net->features |= NETIF_F_HW_VLAN_CTAG_RX;
+
+	if (DEFAULT_VLAN_FILTER_ENABLE)
+		dev->net->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+
+	dev->net->hw_features = dev->net->features;
+
+	ret = lan78xx_setup_irq_domain(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net,
+			    "lan78xx_setup_irq_domain() failed : %d", ret);
+		goto out1;
+	}
+
+	/* Init all registers */
+	ret = lan78xx_reset(dev);
+	if (ret) {
+		netdev_warn(dev->net, "Registers INIT FAILED....");
+		goto out2;
+	}
+
+	ret = lan78xx_mdio_init(dev);
+	if (ret) {
+		netdev_warn(dev->net, "MDIO INIT FAILED.....");
+		goto out2;
+	}
+
+	dev->net->flags |= IFF_MULTICAST;
+
+	pdata->wol = WAKE_MAGIC;
+
+	return ret;
+
+out2:
+	lan78xx_remove_irq_domain(dev);
+
+out1:
+	netdev_warn(dev->net, "Bind routine FAILED");
+	cancel_work_sync(&pdata->set_multicast);
+	cancel_work_sync(&pdata->set_vlan);
+	kfree(pdata);
+	return ret;
+}
+
+static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf)
+{
+	struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
+
+	lan78xx_remove_irq_domain(dev);
+
+	lan78xx_remove_mdio(dev);
+
+	if (pdata) {
+		cancel_work_sync(&pdata->set_multicast);
+		cancel_work_sync(&pdata->set_vlan);
+		netif_dbg(dev, ifdown, dev->net, "free pdata");
+		kfree(pdata);
+		pdata = NULL;
+		dev->data[0] = 0;
+	}
+}
+
+static void lan78xx_rx_csum_offload(struct lan78xx_net *dev,
+				    struct sk_buff *skb,
+				    u32 rx_cmd_a, u32 rx_cmd_b)
+{
+	/* HW Checksum offload appears to be flawed if used when not stripping
+	 * VLAN headers. Drop back to S/W checksums under these conditions.
+	 */
+	if (!(dev->net->features & NETIF_F_RXCSUM) ||
+	    unlikely(rx_cmd_a & RX_CMD_A_ICSM_) ||
+	    ((rx_cmd_a & RX_CMD_A_FVTG_) &&
+	     !(dev->net->features & NETIF_F_HW_VLAN_CTAG_RX))) {
+		skb->ip_summed = CHECKSUM_NONE;
+	} else {
+		skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT_));
+		skb->ip_summed = CHECKSUM_COMPLETE;
+	}
+}
+
+static void lan78xx_rx_vlan_offload(struct lan78xx_net *dev,
+				    struct sk_buff *skb,
+				    u32 rx_cmd_a, u32 rx_cmd_b)
+{
+	if ((dev->net->features & NETIF_F_HW_VLAN_CTAG_RX) &&
+	    (rx_cmd_a & RX_CMD_A_FVTG_))
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
+				       (rx_cmd_b & 0xffff));
+}
+
+static void lan78xx_skb_return(struct lan78xx_net *dev, struct sk_buff *skb)
+{
+	dev->net->stats.rx_packets++;
+	dev->net->stats.rx_bytes += skb->len;
+
+	skb->protocol = eth_type_trans(skb, dev->net);
+
+	netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
+		  skb->len + sizeof(struct ethhdr), skb->protocol);
+	memset(skb->cb, 0, sizeof(struct skb_data));
+
+	if (skb_defer_rx_timestamp(skb))
+		return;
+
+	napi_gro_receive(&dev->napi, skb);
+}
+
+static int lan78xx_rx(struct lan78xx_net *dev, struct sk_buff *skb,
+		      int budget, int *work_done)
+{
+	if (skb->len < RX_SKB_MIN_LEN)
+		return 0;
+
+	/* Extract frames from the URB buffer and pass each one to
+	 * the stack in a new NAPI SKB.
+	 */
+	while (skb->len > 0) {
+		u32 rx_cmd_a, rx_cmd_b, align_count, size;
+		u16 rx_cmd_c;
+		unsigned char *packet;
+
+		rx_cmd_a = get_unaligned_le32(skb->data);
+		skb_pull(skb, sizeof(rx_cmd_a));
+
+		rx_cmd_b = get_unaligned_le32(skb->data);
+		skb_pull(skb, sizeof(rx_cmd_b));
+
+		rx_cmd_c = get_unaligned_le16(skb->data);
+		skb_pull(skb, sizeof(rx_cmd_c));
+
+		packet = skb->data;
+
+		/* get the packet length */
+		size = (rx_cmd_a & RX_CMD_A_LEN_MASK_);
+		align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
+
+		if (unlikely(size > skb->len)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "size err rx_cmd_a=0x%08x\n",
+				  rx_cmd_a);
+			return 0;
+		}
+
+		if (unlikely(rx_cmd_a & RX_CMD_A_RED_)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "Error rx_cmd_a=0x%08x", rx_cmd_a);
+		} else {
+			u32 frame_len;
+			struct sk_buff *skb2;
+
+			if (unlikely(size < ETH_FCS_LEN)) {
+				netif_dbg(dev, rx_err, dev->net,
+					  "size err rx_cmd_a=0x%08x\n",
+					  rx_cmd_a);
+				return 0;
+			}
+
+			frame_len = size - ETH_FCS_LEN;
+
+			skb2 = napi_alloc_skb(&dev->napi, frame_len);
+			if (!skb2)
+				return 0;
+
+			memcpy(skb2->data, packet, frame_len);
+
+			skb_put(skb2, frame_len);
+
+			lan78xx_rx_csum_offload(dev, skb2, rx_cmd_a, rx_cmd_b);
+			lan78xx_rx_vlan_offload(dev, skb2, rx_cmd_a, rx_cmd_b);
+
+			/* Processing of the URB buffer must complete once
+			 * it has started. If the NAPI work budget is exhausted
+			 * while frames remain they are added to the overflow
+			 * queue for delivery in the next NAPI polling cycle.
+			 */
+			if (*work_done < budget) {
+				lan78xx_skb_return(dev, skb2);
+				++(*work_done);
+			} else {
+				skb_queue_tail(&dev->rxq_overflow, skb2);
+			}
+		}
+
+		skb_pull(skb, size);
+
+		/* skip padding bytes before the next frame starts */
+		if (skb->len)
+			skb_pull(skb, align_count);
+	}
+
+	return 1;
+}
+
+static inline void rx_process(struct lan78xx_net *dev, struct sk_buff *skb,
+			      int budget, int *work_done)
+{
+	if (!lan78xx_rx(dev, skb, budget, work_done)) {
+		netif_dbg(dev, rx_err, dev->net, "drop\n");
+		dev->net->stats.rx_errors++;
+	}
+}
+
+static void rx_complete(struct urb *urb)
+{
+	struct sk_buff	*skb = (struct sk_buff *)urb->context;
+	struct skb_data	*entry = (struct skb_data *)skb->cb;
+	struct lan78xx_net *dev = entry->dev;
+	int urb_status = urb->status;
+	enum skb_state state;
+
+	netif_dbg(dev, rx_status, dev->net,
+		  "rx done: status %d", urb->status);
+
+	skb_put(skb, urb->actual_length);
+	state = rx_done;
+
+	if (urb != entry->urb)
+		netif_warn(dev, rx_err, dev->net, "URB pointer mismatch");
+
+	switch (urb_status) {
+	case 0:
+		if (skb->len < RX_SKB_MIN_LEN) {
+			state = rx_cleanup;
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_length_errors++;
+			netif_dbg(dev, rx_err, dev->net,
+				  "rx length %d\n", skb->len);
+		}
+		usb_mark_last_busy(dev->udev);
+		break;
+	case -EPIPE:
+		dev->net->stats.rx_errors++;
+		lan78xx_defer_kevent(dev, EVENT_RX_HALT);
+		fallthrough;
+	case -ECONNRESET:				/* async unlink */
+	case -ESHUTDOWN:				/* hardware gone */
+		netif_dbg(dev, ifdown, dev->net,
+			  "rx shutdown, code %d\n", urb_status);
+		state = rx_cleanup;
+		break;
+	case -EPROTO:
+	case -ETIME:
+	case -EILSEQ:
+		dev->net->stats.rx_errors++;
+		state = rx_cleanup;
+		break;
+
+	/* data overrun ... flush fifo? */
+	case -EOVERFLOW:
+		dev->net->stats.rx_over_errors++;
+		fallthrough;
+
+	default:
+		state = rx_cleanup;
+		dev->net->stats.rx_errors++;
+		netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status);
+		break;
+	}
+
+	state = defer_bh(dev, skb, &dev->rxq, state);
+}
+
+static int rx_submit(struct lan78xx_net *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct skb_data	*entry = (struct skb_data *)skb->cb;
+	size_t size = dev->rx_urb_size;
+	struct urb *urb = entry->urb;
+	unsigned long lockflags;
+	int ret = 0;
+
+	usb_fill_bulk_urb(urb, dev->udev, dev->pipe_in,
+			  skb->data, size, rx_complete, skb);
+
+	spin_lock_irqsave(&dev->rxq.lock, lockflags);
+
+	if (netif_device_present(dev->net) &&
+	    netif_running(dev->net) &&
+	    !test_bit(EVENT_RX_HALT, &dev->flags) &&
+	    !test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
+		ret = usb_submit_urb(urb, flags);
+		switch (ret) {
+		case 0:
+			lan78xx_queue_skb(&dev->rxq, skb, rx_start);
+			break;
+		case -EPIPE:
+			lan78xx_defer_kevent(dev, EVENT_RX_HALT);
+			break;
+		case -ENODEV:
+		case -ENOENT:
+			netif_dbg(dev, ifdown, dev->net, "device gone\n");
+			netif_device_detach(dev->net);
+			break;
+		case -EHOSTUNREACH:
+			ret = -ENOLINK;
+			napi_schedule(&dev->napi);
+			break;
+		default:
+			netif_dbg(dev, rx_err, dev->net,
+				  "rx submit, %d\n", ret);
+			napi_schedule(&dev->napi);
+			break;
+		}
+	} else {
+		netif_dbg(dev, ifdown, dev->net, "rx: stopped\n");
+		ret = -ENOLINK;
+	}
+	spin_unlock_irqrestore(&dev->rxq.lock, lockflags);
+
+	if (ret)
+		lan78xx_release_rx_buf(dev, skb);
+
+	return ret;
+}
+
+static void lan78xx_rx_urb_submit_all(struct lan78xx_net *dev)
+{
+	struct sk_buff *rx_buf;
+
+	/* Ensure the maximum number of Rx URBs is submitted
+	 */
+	while ((rx_buf = lan78xx_get_rx_buf(dev)) != NULL) {
+		if (rx_submit(dev, rx_buf, GFP_ATOMIC) != 0)
+			break;
+	}
+}
+
+static void lan78xx_rx_urb_resubmit(struct lan78xx_net *dev,
+				    struct sk_buff *rx_buf)
+{
+	/* reset SKB data pointers */
+
+	rx_buf->data = rx_buf->head;
+	skb_reset_tail_pointer(rx_buf);
+	rx_buf->len = 0;
+	rx_buf->data_len = 0;
+
+	rx_submit(dev, rx_buf, GFP_ATOMIC);
+}
+
+static void lan78xx_fill_tx_cmd_words(struct sk_buff *skb, u8 *buffer)
+{
+	u32 tx_cmd_a;
+	u32 tx_cmd_b;
+
+	tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN_MASK_) | TX_CMD_A_FCS_;
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		tx_cmd_a |= TX_CMD_A_IPE_ | TX_CMD_A_TPE_;
+
+	tx_cmd_b = 0;
+	if (skb_is_gso(skb)) {
+		u16 mss = max(skb_shinfo(skb)->gso_size, TX_CMD_B_MSS_MIN_);
+
+		tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT_) & TX_CMD_B_MSS_MASK_;
+
+		tx_cmd_a |= TX_CMD_A_LSO_;
+	}
+
+	if (skb_vlan_tag_present(skb)) {
+		tx_cmd_a |= TX_CMD_A_IVTG_;
+		tx_cmd_b |= skb_vlan_tag_get(skb) & TX_CMD_B_VTAG_MASK_;
+	}
+
+	put_unaligned_le32(tx_cmd_a, buffer);
+	put_unaligned_le32(tx_cmd_b, buffer + 4);
+}
+
+static struct skb_data *lan78xx_tx_buf_fill(struct lan78xx_net *dev,
+					    struct sk_buff *tx_buf)
+{
+	struct skb_data *entry = (struct skb_data *)tx_buf->cb;
+	int remain = dev->tx_urb_size;
+	u8 *tx_data = tx_buf->data;
+	u32 urb_len = 0;
+
+	entry->num_of_packet = 0;
+	entry->length = 0;
+
+	/* Work through the pending SKBs and copy the data of each SKB into
+	 * the URB buffer if there room for all the SKB data.
+	 *
+	 * There must be at least DST+SRC+TYPE in the SKB (with padding enabled)
+	 */
+	while (remain >= TX_SKB_MIN_LEN) {
+		unsigned int pending_bytes;
+		unsigned int align_bytes;
+		struct sk_buff *skb;
+		unsigned int len;
+
+		lan78xx_tx_pend_skb_get(dev, &skb, &pending_bytes);
+
+		if (!skb)
+			break;
+
+		align_bytes = (TX_ALIGNMENT - (urb_len % TX_ALIGNMENT)) %
+			      TX_ALIGNMENT;
+		len = align_bytes + TX_CMD_LEN + skb->len;
+		if (len > remain) {
+			lan78xx_tx_pend_skb_head_add(dev, skb, &pending_bytes);
+			break;
+		}
+
+		tx_data += align_bytes;
+
+		lan78xx_fill_tx_cmd_words(skb, tx_data);
+		tx_data += TX_CMD_LEN;
+
+		len = skb->len;
+		if (skb_copy_bits(skb, 0, tx_data, len) < 0) {
+			struct net_device_stats *stats = &dev->net->stats;
+
+			stats->tx_dropped++;
+			dev_kfree_skb_any(skb);
+			tx_data -= TX_CMD_LEN;
+			continue;
+		}
+
+		tx_data += len;
+		entry->length += len;
+		entry->num_of_packet += skb_shinfo(skb)->gso_segs ?: 1;
+
+		dev_kfree_skb_any(skb);
+
+		urb_len = (u32)(tx_data - (u8 *)tx_buf->data);
+
+		remain = dev->tx_urb_size - urb_len;
+	}
+
+	skb_put(tx_buf, urb_len);
+
+	return entry;
+}
+
+static void lan78xx_tx_bh(struct lan78xx_net *dev)
+{
+	int ret;
+
+	/* Start the stack Tx queue if it was stopped
+	 */
+	netif_tx_lock(dev->net);
+	if (netif_queue_stopped(dev->net)) {
+		if (lan78xx_tx_pend_data_len(dev) < lan78xx_tx_urb_space(dev))
+			netif_wake_queue(dev->net);
+	}
+	netif_tx_unlock(dev->net);
+
+	/* Go through the Tx pending queue and set up URBs to transfer
+	 * the data to the device. Stop if no more pending data or URBs,
+	 * or if an error occurs when a URB is submitted.
+	 */
+	do {
+		struct skb_data *entry;
+		struct sk_buff *tx_buf;
+		unsigned long flags;
+
+		if (skb_queue_empty(&dev->txq_pend))
+			break;
+
+		tx_buf = lan78xx_get_tx_buf(dev);
+		if (!tx_buf)
+			break;
+
+		entry = lan78xx_tx_buf_fill(dev, tx_buf);
+
+		spin_lock_irqsave(&dev->txq.lock, flags);
+		ret = usb_autopm_get_interface_async(dev->intf);
+		if (ret < 0) {
+			spin_unlock_irqrestore(&dev->txq.lock, flags);
+			goto out;
+		}
+
+		usb_fill_bulk_urb(entry->urb, dev->udev, dev->pipe_out,
+				  tx_buf->data, tx_buf->len, tx_complete,
+				  tx_buf);
+
+		if (tx_buf->len % dev->maxpacket == 0) {
+			/* send USB_ZERO_PACKET */
+			entry->urb->transfer_flags |= URB_ZERO_PACKET;
+		}
+
+#ifdef CONFIG_PM
+		/* if device is asleep stop outgoing packet processing */
+		if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
+			usb_anchor_urb(entry->urb, &dev->deferred);
+			netif_stop_queue(dev->net);
+			spin_unlock_irqrestore(&dev->txq.lock, flags);
+			netdev_dbg(dev->net,
+				   "Delaying transmission for resumption\n");
+			return;
+		}
+#endif
+		ret = usb_submit_urb(entry->urb, GFP_ATOMIC);
+		switch (ret) {
+		case 0:
+			netif_trans_update(dev->net);
+			lan78xx_queue_skb(&dev->txq, tx_buf, tx_start);
+			break;
+		case -EPIPE:
+			netif_stop_queue(dev->net);
+			lan78xx_defer_kevent(dev, EVENT_TX_HALT);
+			usb_autopm_put_interface_async(dev->intf);
+			break;
+		case -ENODEV:
+		case -ENOENT:
+			netif_dbg(dev, tx_err, dev->net,
+				  "tx submit urb err %d (disconnected?)", ret);
+			netif_device_detach(dev->net);
+			break;
+		default:
+			usb_autopm_put_interface_async(dev->intf);
+			netif_dbg(dev, tx_err, dev->net,
+				  "tx submit urb err %d\n", ret);
+			break;
+		}
+
+		spin_unlock_irqrestore(&dev->txq.lock, flags);
+
+		if (ret) {
+			netdev_warn(dev->net, "failed to tx urb %d\n", ret);
+out:
+			dev->net->stats.tx_dropped += entry->num_of_packet;
+			lan78xx_release_tx_buf(dev, tx_buf);
+		}
+	} while (ret == 0);
+}
+
+static int lan78xx_bh(struct lan78xx_net *dev, int budget)
+{
+	struct sk_buff_head done;
+	struct sk_buff *rx_buf;
+	struct skb_data *entry;
+	unsigned long flags;
+	int work_done = 0;
+
+	/* Pass frames received in the last NAPI cycle before
+	 * working on newly completed URBs.
+	 */
+	while (!skb_queue_empty(&dev->rxq_overflow)) {
+		lan78xx_skb_return(dev, skb_dequeue(&dev->rxq_overflow));
+		++work_done;
+	}
+
+	/* Take a snapshot of the done queue and move items to a
+	 * temporary queue. Rx URB completions will continue to add
+	 * to the done queue.
+	 */
+	__skb_queue_head_init(&done);
+
+	spin_lock_irqsave(&dev->rxq_done.lock, flags);
+	skb_queue_splice_init(&dev->rxq_done, &done);
+	spin_unlock_irqrestore(&dev->rxq_done.lock, flags);
+
+	/* Extract receive frames from completed URBs and
+	 * pass them to the stack. Re-submit each completed URB.
+	 */
+	while ((work_done < budget) &&
+	       (rx_buf = __skb_dequeue(&done))) {
+		entry = (struct skb_data *)(rx_buf->cb);
+		switch (entry->state) {
+		case rx_done:
+			rx_process(dev, rx_buf, budget, &work_done);
+			break;
+		case rx_cleanup:
+			break;
+		default:
+			netdev_dbg(dev->net, "rx buf state %d\n",
+				   entry->state);
+			break;
+		}
+
+		lan78xx_rx_urb_resubmit(dev, rx_buf);
+	}
+
+	/* If budget was consumed before processing all the URBs put them
+	 * back on the front of the done queue. They will be first to be
+	 * processed in the next NAPI cycle.
+	 */
+	spin_lock_irqsave(&dev->rxq_done.lock, flags);
+	skb_queue_splice(&done, &dev->rxq_done);
+	spin_unlock_irqrestore(&dev->rxq_done.lock, flags);
+
+	if (netif_device_present(dev->net) && netif_running(dev->net)) {
+		/* reset update timer delta */
+		if (timer_pending(&dev->stat_monitor) && (dev->delta != 1)) {
+			dev->delta = 1;
+			mod_timer(&dev->stat_monitor,
+				  jiffies + STAT_UPDATE_TIMER);
+		}
+
+		/* Submit all free Rx URBs */
+
+		if (!test_bit(EVENT_RX_HALT, &dev->flags))
+			lan78xx_rx_urb_submit_all(dev);
+
+		/* Submit new Tx URBs */
+
+		lan78xx_tx_bh(dev);
+	}
+
+	return work_done;
+}
+
+static int lan78xx_poll(struct napi_struct *napi, int budget)
+{
+	struct lan78xx_net *dev = container_of(napi, struct lan78xx_net, napi);
+	int result = budget;
+	int work_done;
+
+	/* Don't do any work if the device is suspended */
+
+	if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
+		napi_complete_done(napi, 0);
+		return 0;
+	}
+
+	/* Process completed URBs and submit new URBs */
+
+	work_done = lan78xx_bh(dev, budget);
+
+	if (work_done < budget) {
+		napi_complete_done(napi, work_done);
+
+		/* Start a new polling cycle if data was received or
+		 * data is waiting to be transmitted.
+		 */
+		if (!skb_queue_empty(&dev->rxq_done)) {
+			napi_schedule(napi);
+		} else if (netif_carrier_ok(dev->net)) {
+			if (skb_queue_empty(&dev->txq) &&
+			    !skb_queue_empty(&dev->txq_pend)) {
+				napi_schedule(napi);
+			} else {
+				netif_tx_lock(dev->net);
+				if (netif_queue_stopped(dev->net)) {
+					netif_wake_queue(dev->net);
+					napi_schedule(napi);
+				}
+				netif_tx_unlock(dev->net);
+			}
+		}
+		result = work_done;
+	}
+
+	return result;
+}
+
+static void lan78xx_delayedwork(struct work_struct *work)
+{
+	int status;
+	struct lan78xx_net *dev;
+
+	dev = container_of(work, struct lan78xx_net, wq.work);
+
+	if (test_bit(EVENT_DEV_DISCONNECT, &dev->flags))
+		return;
+
+	if (usb_autopm_get_interface(dev->intf) < 0)
+		return;
+
+	if (test_bit(EVENT_TX_HALT, &dev->flags)) {
+		unlink_urbs(dev, &dev->txq);
+
+		status = usb_clear_halt(dev->udev, dev->pipe_out);
+		if (status < 0 &&
+		    status != -EPIPE &&
+		    status != -ESHUTDOWN) {
+			if (netif_msg_tx_err(dev))
+				netdev_err(dev->net,
+					   "can't clear tx halt, status %d\n",
+					   status);
+		} else {
+			clear_bit(EVENT_TX_HALT, &dev->flags);
+			if (status != -ESHUTDOWN)
+				netif_wake_queue(dev->net);
+		}
+	}
+
+	if (test_bit(EVENT_RX_HALT, &dev->flags)) {
+		unlink_urbs(dev, &dev->rxq);
+		status = usb_clear_halt(dev->udev, dev->pipe_in);
+		if (status < 0 &&
+		    status != -EPIPE &&
+		    status != -ESHUTDOWN) {
+			if (netif_msg_rx_err(dev))
+				netdev_err(dev->net,
+					   "can't clear rx halt, status %d\n",
+					   status);
+		} else {
+			clear_bit(EVENT_RX_HALT, &dev->flags);
+			napi_schedule(&dev->napi);
+		}
+	}
+
+	if (test_bit(EVENT_LINK_RESET, &dev->flags)) {
+		int ret = 0;
+
+		clear_bit(EVENT_LINK_RESET, &dev->flags);
+		if (lan78xx_link_reset(dev) < 0) {
+			netdev_info(dev->net, "link reset failed (%d)\n",
+				    ret);
+		}
+	}
+
+	if (test_bit(EVENT_STAT_UPDATE, &dev->flags)) {
+		lan78xx_update_stats(dev);
+
+		clear_bit(EVENT_STAT_UPDATE, &dev->flags);
+
+		mod_timer(&dev->stat_monitor,
+			  jiffies + (STAT_UPDATE_TIMER * dev->delta));
+
+		dev->delta = min((dev->delta * 2), 50);
+	}
+
+	usb_autopm_put_interface(dev->intf);
+}
+
+static void intr_complete(struct urb *urb)
+{
+	struct lan78xx_net *dev = urb->context;
+	int status = urb->status;
+
+	switch (status) {
+	/* success */
+	case 0:
+		lan78xx_status(dev, urb);
+		break;
+
+	/* software-driven interface shutdown */
+	case -ENOENT:			/* urb killed */
+	case -ENODEV:			/* hardware gone */
+	case -ESHUTDOWN:		/* hardware gone */
+		netif_dbg(dev, ifdown, dev->net,
+			  "intr shutdown, code %d\n", status);
+		return;
+
+	/* NOTE:  not throttling like RX/TX, since this endpoint
+	 * already polls infrequently
+	 */
+	default:
+		netdev_dbg(dev->net, "intr status %d\n", status);
+		break;
+	}
+
+	if (!netif_device_present(dev->net) ||
+	    !netif_running(dev->net)) {
+		netdev_warn(dev->net, "not submitting new status URB");
+		return;
+	}
+
+	memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+
+	switch (status) {
+	case  0:
+		break;
+	case -ENODEV:
+	case -ENOENT:
+		netif_dbg(dev, timer, dev->net,
+			  "intr resubmit %d (disconnect?)", status);
+		netif_device_detach(dev->net);
+		break;
+	default:
+		netif_err(dev, timer, dev->net,
+			  "intr resubmit --> %d\n", status);
+		break;
+	}
+}
+
+static void lan78xx_disconnect(struct usb_interface *intf)
+{
+	struct lan78xx_net *dev;
+	struct usb_device *udev;
+	struct net_device *net;
+	struct phy_device *phydev;
+
+	dev = usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+	if (!dev)
+		return;
+
+	set_bit(EVENT_DEV_DISCONNECT, &dev->flags);
+
+	netif_napi_del(&dev->napi);
+
+	udev = interface_to_usbdev(intf);
+	net = dev->net;
+
+	unregister_netdev(net);
+
+	cancel_delayed_work_sync(&dev->wq);
+
+	phydev = net->phydev;
+
+	phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
+	phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
+
+	phy_disconnect(net->phydev);
+
+	if (phy_is_pseudo_fixed_link(phydev))
+		fixed_phy_unregister(phydev);
+
+	usb_scuttle_anchored_urbs(&dev->deferred);
+
+	if (timer_pending(&dev->stat_monitor))
+		del_timer_sync(&dev->stat_monitor);
+
+	lan78xx_unbind(dev, intf);
+
+	lan78xx_free_tx_resources(dev);
+	lan78xx_free_rx_resources(dev);
+
+	usb_kill_urb(dev->urb_intr);
+	usb_free_urb(dev->urb_intr);
+
+	free_netdev(net);
+	usb_put_dev(udev);
+}
+
+static void lan78xx_tx_timeout(struct net_device *net, unsigned int txqueue)
+{
+	struct lan78xx_net *dev = netdev_priv(net);
+
+	unlink_urbs(dev, &dev->txq);
+	napi_schedule(&dev->napi);
+}
+
+static netdev_features_t lan78xx_features_check(struct sk_buff *skb,
+						struct net_device *netdev,
+						netdev_features_t features)
+{
+	struct lan78xx_net *dev = netdev_priv(netdev);
+
+	if (skb->len > LAN78XX_TSO_SIZE(dev))
+		features &= ~NETIF_F_GSO_MASK;
+
+	features = vlan_features_check(skb, features);
+	features = vxlan_features_check(skb, features);
+
+	return features;
+}
+
+static const struct net_device_ops lan78xx_netdev_ops = {
+	.ndo_open		= lan78xx_open,
+	.ndo_stop		= lan78xx_stop,
+	.ndo_start_xmit		= lan78xx_start_xmit,
+	.ndo_tx_timeout		= lan78xx_tx_timeout,
+	.ndo_change_mtu		= lan78xx_change_mtu,
+	.ndo_set_mac_address	= lan78xx_set_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= phy_do_ioctl_running,
+	.ndo_set_rx_mode	= lan78xx_set_multicast,
+	.ndo_set_features	= lan78xx_set_features,
+	.ndo_vlan_rx_add_vid	= lan78xx_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= lan78xx_vlan_rx_kill_vid,
+	.ndo_features_check	= lan78xx_features_check,
+};
+
+static void lan78xx_stat_monitor(struct timer_list *t)
+{
+	struct lan78xx_net *dev = from_timer(dev, t, stat_monitor);
+
+	lan78xx_defer_kevent(dev, EVENT_STAT_UPDATE);
+}
+
+static int lan78xx_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_host_endpoint *ep_blkin, *ep_blkout, *ep_intr;
+	struct lan78xx_net *dev;
+	struct net_device *netdev;
+	struct usb_device *udev;
+	int ret;
+	unsigned int maxp;
+	unsigned int period;
+	u8 *buf = NULL;
+
+	udev = interface_to_usbdev(intf);
+	udev = usb_get_dev(udev);
+
+	netdev = alloc_etherdev(sizeof(struct lan78xx_net));
+	if (!netdev) {
+		dev_err(&intf->dev, "Error: OOM\n");
+		ret = -ENOMEM;
+		goto out1;
+	}
+
+	/* netdev_printk() needs this */
+	SET_NETDEV_DEV(netdev, &intf->dev);
+
+	dev = netdev_priv(netdev);
+	dev->udev = udev;
+	dev->intf = intf;
+	dev->net = netdev;
+	dev->msg_enable = netif_msg_init(msg_level, NETIF_MSG_DRV
+					| NETIF_MSG_PROBE | NETIF_MSG_LINK);
+
+	skb_queue_head_init(&dev->rxq);
+	skb_queue_head_init(&dev->txq);
+	skb_queue_head_init(&dev->rxq_done);
+	skb_queue_head_init(&dev->txq_pend);
+	skb_queue_head_init(&dev->rxq_overflow);
+	mutex_init(&dev->phy_mutex);
+	mutex_init(&dev->dev_mutex);
+
+	ret = lan78xx_urb_config_init(dev);
+	if (ret < 0)
+		goto out2;
+
+	ret = lan78xx_alloc_tx_resources(dev);
+	if (ret < 0)
+		goto out2;
+
+	ret = lan78xx_alloc_rx_resources(dev);
+	if (ret < 0)
+		goto out3;
+
+	/* MTU range: 68 - 9000 */
+	netdev->max_mtu = MAX_SINGLE_PACKET_SIZE;
+
+	netif_set_tso_max_size(netdev, LAN78XX_TSO_SIZE(dev));
+
+	netif_napi_add(netdev, &dev->napi, lan78xx_poll);
+
+	INIT_DELAYED_WORK(&dev->wq, lan78xx_delayedwork);
+	init_usb_anchor(&dev->deferred);
+
+	netdev->netdev_ops = &lan78xx_netdev_ops;
+	netdev->watchdog_timeo = TX_TIMEOUT_JIFFIES;
+	netdev->ethtool_ops = &lan78xx_ethtool_ops;
+
+	dev->delta = 1;
+	timer_setup(&dev->stat_monitor, lan78xx_stat_monitor, 0);
+
+	mutex_init(&dev->stats.access_lock);
+
+	if (intf->cur_altsetting->desc.bNumEndpoints < 3) {
+		ret = -ENODEV;
+		goto out4;
+	}
+
+	dev->pipe_in = usb_rcvbulkpipe(udev, BULK_IN_PIPE);
+	ep_blkin = usb_pipe_endpoint(udev, dev->pipe_in);
+	if (!ep_blkin || !usb_endpoint_is_bulk_in(&ep_blkin->desc)) {
+		ret = -ENODEV;
+		goto out4;
+	}
+
+	dev->pipe_out = usb_sndbulkpipe(udev, BULK_OUT_PIPE);
+	ep_blkout = usb_pipe_endpoint(udev, dev->pipe_out);
+	if (!ep_blkout || !usb_endpoint_is_bulk_out(&ep_blkout->desc)) {
+		ret = -ENODEV;
+		goto out4;
+	}
+
+	ep_intr = &intf->cur_altsetting->endpoint[2];
+	if (!usb_endpoint_is_int_in(&ep_intr->desc)) {
+		ret = -ENODEV;
+		goto out4;
+	}
+
+	dev->pipe_intr = usb_rcvintpipe(dev->udev,
+					usb_endpoint_num(&ep_intr->desc));
+
+	ret = lan78xx_bind(dev, intf);
+	if (ret < 0)
+		goto out4;
+
+	period = ep_intr->desc.bInterval;
+	maxp = usb_maxpacket(dev->udev, dev->pipe_intr);
+	buf = kmalloc(maxp, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto out5;
+	}
+
+	dev->urb_intr = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->urb_intr) {
+		ret = -ENOMEM;
+		goto out6;
+	} else {
+		usb_fill_int_urb(dev->urb_intr, dev->udev,
+				 dev->pipe_intr, buf, maxp,
+				 intr_complete, dev, period);
+		dev->urb_intr->transfer_flags |= URB_FREE_BUFFER;
+	}
+
+	dev->maxpacket = usb_maxpacket(dev->udev, dev->pipe_out);
+
+	/* Reject broken descriptors. */
+	if (dev->maxpacket == 0) {
+		ret = -ENODEV;
+		goto out6;
+	}
+
+	/* driver requires remote-wakeup capability during autosuspend. */
+	intf->needs_remote_wakeup = 1;
+
+	ret = lan78xx_phy_init(dev);
+	if (ret < 0)
+		goto out7;
+
+	ret = register_netdev(netdev);
+	if (ret != 0) {
+		netif_err(dev, probe, netdev, "couldn't register the device\n");
+		goto out8;
+	}
+
+	usb_set_intfdata(intf, dev);
+
+	ret = device_set_wakeup_enable(&udev->dev, true);
+
+	 /* Default delay of 2sec has more overhead than advantage.
+	  * Set to 10sec as default.
+	  */
+	pm_runtime_set_autosuspend_delay(&udev->dev,
+					 DEFAULT_AUTOSUSPEND_DELAY);
+
+	return 0;
+
+out8:
+	phy_disconnect(netdev->phydev);
+out7:
+	usb_free_urb(dev->urb_intr);
+out6:
+	kfree(buf);
+out5:
+	lan78xx_unbind(dev, intf);
+out4:
+	netif_napi_del(&dev->napi);
+	lan78xx_free_rx_resources(dev);
+out3:
+	lan78xx_free_tx_resources(dev);
+out2:
+	free_netdev(netdev);
+out1:
+	usb_put_dev(udev);
+
+	return ret;
+}
+
+static u16 lan78xx_wakeframe_crc16(const u8 *buf, int len)
+{
+	const u16 crc16poly = 0x8005;
+	int i;
+	u16 bit, crc, msb;
+	u8 data;
+
+	crc = 0xFFFF;
+	for (i = 0; i < len; i++) {
+		data = *buf++;
+		for (bit = 0; bit < 8; bit++) {
+			msb = crc >> 15;
+			crc <<= 1;
+
+			if (msb ^ (u16)(data & 1)) {
+				crc ^= crc16poly;
+				crc |= (u16)0x0001U;
+			}
+			data >>= 1;
+		}
+	}
+
+	return crc;
+}
+
+static int lan78xx_set_auto_suspend(struct lan78xx_net *dev)
+{
+	u32 buf;
+	int ret;
+
+	ret = lan78xx_stop_tx_path(dev);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_stop_rx_path(dev);
+	if (ret < 0)
+		return ret;
+
+	/* auto suspend (selective suspend) */
+
+	ret = lan78xx_write_reg(dev, WUCSR, 0);
+	if (ret < 0)
+		return ret;
+	ret = lan78xx_write_reg(dev, WUCSR2, 0);
+	if (ret < 0)
+		return ret;
+	ret = lan78xx_write_reg(dev, WK_SRC, 0xFFF1FF1FUL);
+	if (ret < 0)
+		return ret;
+
+	/* set goodframe wakeup */
+
+	ret = lan78xx_read_reg(dev, WUCSR, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf |= WUCSR_RFE_WAKE_EN_;
+	buf |= WUCSR_STORE_WAKE_;
+
+	ret = lan78xx_write_reg(dev, WUCSR, buf);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_read_reg(dev, PMT_CTL, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf &= ~PMT_CTL_RES_CLR_WKP_EN_;
+	buf |= PMT_CTL_RES_CLR_WKP_STS_;
+	buf |= PMT_CTL_PHY_WAKE_EN_;
+	buf |= PMT_CTL_WOL_EN_;
+	buf &= ~PMT_CTL_SUS_MODE_MASK_;
+	buf |= PMT_CTL_SUS_MODE_3_;
+
+	ret = lan78xx_write_reg(dev, PMT_CTL, buf);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_read_reg(dev, PMT_CTL, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf |= PMT_CTL_WUPS_MASK_;
+
+	ret = lan78xx_write_reg(dev, PMT_CTL, buf);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_start_rx_path(dev);
+
+	return ret;
+}
+
+static int lan78xx_set_suspend(struct lan78xx_net *dev, u32 wol)
+{
+	const u8 ipv4_multicast[3] = { 0x01, 0x00, 0x5E };
+	const u8 ipv6_multicast[3] = { 0x33, 0x33 };
+	const u8 arp_type[2] = { 0x08, 0x06 };
+	u32 temp_pmt_ctl;
+	int mask_index;
+	u32 temp_wucsr;
+	u32 buf;
+	u16 crc;
+	int ret;
+
+	ret = lan78xx_stop_tx_path(dev);
+	if (ret < 0)
+		return ret;
+	ret = lan78xx_stop_rx_path(dev);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_write_reg(dev, WUCSR, 0);
+	if (ret < 0)
+		return ret;
+	ret = lan78xx_write_reg(dev, WUCSR2, 0);
+	if (ret < 0)
+		return ret;
+	ret = lan78xx_write_reg(dev, WK_SRC, 0xFFF1FF1FUL);
+	if (ret < 0)
+		return ret;
+
+	temp_wucsr = 0;
+
+	temp_pmt_ctl = 0;
+
+	ret = lan78xx_read_reg(dev, PMT_CTL, &temp_pmt_ctl);
+	if (ret < 0)
+		return ret;
+
+	temp_pmt_ctl &= ~PMT_CTL_RES_CLR_WKP_EN_;
+	temp_pmt_ctl |= PMT_CTL_RES_CLR_WKP_STS_;
+
+	for (mask_index = 0; mask_index < NUM_OF_WUF_CFG; mask_index++) {
+		ret = lan78xx_write_reg(dev, WUF_CFG(mask_index), 0);
+		if (ret < 0)
+			return ret;
+	}
+
+	mask_index = 0;
+	if (wol & WAKE_PHY) {
+		temp_pmt_ctl |= PMT_CTL_PHY_WAKE_EN_;
+
+		temp_pmt_ctl |= PMT_CTL_WOL_EN_;
+		temp_pmt_ctl &= ~PMT_CTL_SUS_MODE_MASK_;
+		temp_pmt_ctl |= PMT_CTL_SUS_MODE_0_;
+	}
+	if (wol & WAKE_MAGIC) {
+		temp_wucsr |= WUCSR_MPEN_;
+
+		temp_pmt_ctl |= PMT_CTL_WOL_EN_;
+		temp_pmt_ctl &= ~PMT_CTL_SUS_MODE_MASK_;
+		temp_pmt_ctl |= PMT_CTL_SUS_MODE_3_;
+	}
+	if (wol & WAKE_BCAST) {
+		temp_wucsr |= WUCSR_BCST_EN_;
+
+		temp_pmt_ctl |= PMT_CTL_WOL_EN_;
+		temp_pmt_ctl &= ~PMT_CTL_SUS_MODE_MASK_;
+		temp_pmt_ctl |= PMT_CTL_SUS_MODE_0_;
+	}
+	if (wol & WAKE_MCAST) {
+		temp_wucsr |= WUCSR_WAKE_EN_;
+
+		/* set WUF_CFG & WUF_MASK for IPv4 Multicast */
+		crc = lan78xx_wakeframe_crc16(ipv4_multicast, 3);
+		ret = lan78xx_write_reg(dev, WUF_CFG(mask_index),
+					WUF_CFGX_EN_ |
+					WUF_CFGX_TYPE_MCAST_ |
+					(0 << WUF_CFGX_OFFSET_SHIFT_) |
+					(crc & WUF_CFGX_CRC16_MASK_));
+		if (ret < 0)
+			return ret;
+
+		ret = lan78xx_write_reg(dev, WUF_MASK0(mask_index), 7);
+		if (ret < 0)
+			return ret;
+		ret = lan78xx_write_reg(dev, WUF_MASK1(mask_index), 0);
+		if (ret < 0)
+			return ret;
+		ret = lan78xx_write_reg(dev, WUF_MASK2(mask_index), 0);
+		if (ret < 0)
+			return ret;
+		ret = lan78xx_write_reg(dev, WUF_MASK3(mask_index), 0);
+		if (ret < 0)
+			return ret;
+
+		mask_index++;
+
+		/* for IPv6 Multicast */
+		crc = lan78xx_wakeframe_crc16(ipv6_multicast, 2);
+		ret = lan78xx_write_reg(dev, WUF_CFG(mask_index),
+					WUF_CFGX_EN_ |
+					WUF_CFGX_TYPE_MCAST_ |
+					(0 << WUF_CFGX_OFFSET_SHIFT_) |
+					(crc & WUF_CFGX_CRC16_MASK_));
+		if (ret < 0)
+			return ret;
+
+		ret = lan78xx_write_reg(dev, WUF_MASK0(mask_index), 3);
+		if (ret < 0)
+			return ret;
+		ret = lan78xx_write_reg(dev, WUF_MASK1(mask_index), 0);
+		if (ret < 0)
+			return ret;
+		ret = lan78xx_write_reg(dev, WUF_MASK2(mask_index), 0);
+		if (ret < 0)
+			return ret;
+		ret = lan78xx_write_reg(dev, WUF_MASK3(mask_index), 0);
+		if (ret < 0)
+			return ret;
+
+		mask_index++;
+
+		temp_pmt_ctl |= PMT_CTL_WOL_EN_;
+		temp_pmt_ctl &= ~PMT_CTL_SUS_MODE_MASK_;
+		temp_pmt_ctl |= PMT_CTL_SUS_MODE_0_;
+	}
+	if (wol & WAKE_UCAST) {
+		temp_wucsr |= WUCSR_PFDA_EN_;
+
+		temp_pmt_ctl |= PMT_CTL_WOL_EN_;
+		temp_pmt_ctl &= ~PMT_CTL_SUS_MODE_MASK_;
+		temp_pmt_ctl |= PMT_CTL_SUS_MODE_0_;
+	}
+	if (wol & WAKE_ARP) {
+		temp_wucsr |= WUCSR_WAKE_EN_;
+
+		/* set WUF_CFG & WUF_MASK
+		 * for packettype (offset 12,13) = ARP (0x0806)
+		 */
+		crc = lan78xx_wakeframe_crc16(arp_type, 2);
+		ret = lan78xx_write_reg(dev, WUF_CFG(mask_index),
+					WUF_CFGX_EN_ |
+					WUF_CFGX_TYPE_ALL_ |
+					(0 << WUF_CFGX_OFFSET_SHIFT_) |
+					(crc & WUF_CFGX_CRC16_MASK_));
+		if (ret < 0)
+			return ret;
+
+		ret = lan78xx_write_reg(dev, WUF_MASK0(mask_index), 0x3000);
+		if (ret < 0)
+			return ret;
+		ret = lan78xx_write_reg(dev, WUF_MASK1(mask_index), 0);
+		if (ret < 0)
+			return ret;
+		ret = lan78xx_write_reg(dev, WUF_MASK2(mask_index), 0);
+		if (ret < 0)
+			return ret;
+		ret = lan78xx_write_reg(dev, WUF_MASK3(mask_index), 0);
+		if (ret < 0)
+			return ret;
+
+		mask_index++;
+
+		temp_pmt_ctl |= PMT_CTL_WOL_EN_;
+		temp_pmt_ctl &= ~PMT_CTL_SUS_MODE_MASK_;
+		temp_pmt_ctl |= PMT_CTL_SUS_MODE_0_;
+	}
+
+	ret = lan78xx_write_reg(dev, WUCSR, temp_wucsr);
+	if (ret < 0)
+		return ret;
+
+	/* when multiple WOL bits are set */
+	if (hweight_long((unsigned long)wol) > 1) {
+		temp_pmt_ctl |= PMT_CTL_WOL_EN_;
+		temp_pmt_ctl &= ~PMT_CTL_SUS_MODE_MASK_;
+		temp_pmt_ctl |= PMT_CTL_SUS_MODE_0_;
+	}
+	ret = lan78xx_write_reg(dev, PMT_CTL, temp_pmt_ctl);
+	if (ret < 0)
+		return ret;
+
+	/* clear WUPS */
+	ret = lan78xx_read_reg(dev, PMT_CTL, &buf);
+	if (ret < 0)
+		return ret;
+
+	buf |= PMT_CTL_WUPS_MASK_;
+
+	ret = lan78xx_write_reg(dev, PMT_CTL, buf);
+	if (ret < 0)
+		return ret;
+
+	ret = lan78xx_start_rx_path(dev);
+
+	return ret;
+}
+
+static int lan78xx_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct lan78xx_net *dev = usb_get_intfdata(intf);
+	bool dev_open;
+	int ret;
+
+	mutex_lock(&dev->dev_mutex);
+
+	netif_dbg(dev, ifdown, dev->net,
+		  "suspending: pm event %#x", message.event);
+
+	dev_open = test_bit(EVENT_DEV_OPEN, &dev->flags);
+
+	if (dev_open) {
+		spin_lock_irq(&dev->txq.lock);
+		/* don't autosuspend while transmitting */
+		if ((skb_queue_len(&dev->txq) ||
+		     skb_queue_len(&dev->txq_pend)) &&
+		    PMSG_IS_AUTO(message)) {
+			spin_unlock_irq(&dev->txq.lock);
+			ret = -EBUSY;
+			goto out;
+		} else {
+			set_bit(EVENT_DEV_ASLEEP, &dev->flags);
+			spin_unlock_irq(&dev->txq.lock);
+		}
+
+		/* stop RX */
+		ret = lan78xx_stop_rx_path(dev);
+		if (ret < 0)
+			goto out;
+
+		ret = lan78xx_flush_rx_fifo(dev);
+		if (ret < 0)
+			goto out;
+
+		/* stop Tx */
+		ret = lan78xx_stop_tx_path(dev);
+		if (ret < 0)
+			goto out;
+
+		/* empty out the Rx and Tx queues */
+		netif_device_detach(dev->net);
+		lan78xx_terminate_urbs(dev);
+		usb_kill_urb(dev->urb_intr);
+
+		/* reattach */
+		netif_device_attach(dev->net);
+
+		del_timer(&dev->stat_monitor);
+
+		if (PMSG_IS_AUTO(message)) {
+			ret = lan78xx_set_auto_suspend(dev);
+			if (ret < 0)
+				goto out;
+		} else {
+			struct lan78xx_priv *pdata;
+
+			pdata = (struct lan78xx_priv *)(dev->data[0]);
+			netif_carrier_off(dev->net);
+			ret = lan78xx_set_suspend(dev, pdata->wol);
+			if (ret < 0)
+				goto out;
+		}
+	} else {
+		/* Interface is down; don't allow WOL and PHY
+		 * events to wake up the host
+		 */
+		u32 buf;
+
+		set_bit(EVENT_DEV_ASLEEP, &dev->flags);
+
+		ret = lan78xx_write_reg(dev, WUCSR, 0);
+		if (ret < 0)
+			goto out;
+		ret = lan78xx_write_reg(dev, WUCSR2, 0);
+		if (ret < 0)
+			goto out;
+
+		ret = lan78xx_read_reg(dev, PMT_CTL, &buf);
+		if (ret < 0)
+			goto out;
+
+		buf &= ~PMT_CTL_RES_CLR_WKP_EN_;
+		buf |= PMT_CTL_RES_CLR_WKP_STS_;
+		buf &= ~PMT_CTL_SUS_MODE_MASK_;
+		buf |= PMT_CTL_SUS_MODE_3_;
+
+		ret = lan78xx_write_reg(dev, PMT_CTL, buf);
+		if (ret < 0)
+			goto out;
+
+		ret = lan78xx_read_reg(dev, PMT_CTL, &buf);
+		if (ret < 0)
+			goto out;
+
+		buf |= PMT_CTL_WUPS_MASK_;
+
+		ret = lan78xx_write_reg(dev, PMT_CTL, buf);
+		if (ret < 0)
+			goto out;
+	}
+
+	ret = 0;
+out:
+	mutex_unlock(&dev->dev_mutex);
+
+	return ret;
+}
+
+static bool lan78xx_submit_deferred_urbs(struct lan78xx_net *dev)
+{
+	bool pipe_halted = false;
+	struct urb *urb;
+
+	while ((urb = usb_get_from_anchor(&dev->deferred))) {
+		struct sk_buff *skb = urb->context;
+		int ret;
+
+		if (!netif_device_present(dev->net) ||
+		    !netif_carrier_ok(dev->net) ||
+		    pipe_halted) {
+			lan78xx_release_tx_buf(dev, skb);
+			continue;
+		}
+
+		ret = usb_submit_urb(urb, GFP_ATOMIC);
+
+		if (ret == 0) {
+			netif_trans_update(dev->net);
+			lan78xx_queue_skb(&dev->txq, skb, tx_start);
+		} else {
+			if (ret == -EPIPE) {
+				netif_stop_queue(dev->net);
+				pipe_halted = true;
+			} else if (ret == -ENODEV) {
+				netif_device_detach(dev->net);
+			}
+
+			lan78xx_release_tx_buf(dev, skb);
+		}
+	}
+
+	return pipe_halted;
+}
+
+static int lan78xx_resume(struct usb_interface *intf)
+{
+	struct lan78xx_net *dev = usb_get_intfdata(intf);
+	bool dev_open;
+	int ret;
+
+	mutex_lock(&dev->dev_mutex);
+
+	netif_dbg(dev, ifup, dev->net, "resuming device");
+
+	dev_open = test_bit(EVENT_DEV_OPEN, &dev->flags);
+
+	if (dev_open) {
+		bool pipe_halted = false;
+
+		ret = lan78xx_flush_tx_fifo(dev);
+		if (ret < 0)
+			goto out;
+
+		if (dev->urb_intr) {
+			int ret = usb_submit_urb(dev->urb_intr, GFP_KERNEL);
+
+			if (ret < 0) {
+				if (ret == -ENODEV)
+					netif_device_detach(dev->net);
+				netdev_warn(dev->net, "Failed to submit intr URB");
+			}
+		}
+
+		spin_lock_irq(&dev->txq.lock);
+
+		if (netif_device_present(dev->net)) {
+			pipe_halted = lan78xx_submit_deferred_urbs(dev);
+
+			if (pipe_halted)
+				lan78xx_defer_kevent(dev, EVENT_TX_HALT);
+		}
+
+		clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
+
+		spin_unlock_irq(&dev->txq.lock);
+
+		if (!pipe_halted &&
+		    netif_device_present(dev->net) &&
+		    (lan78xx_tx_pend_data_len(dev) < lan78xx_tx_urb_space(dev)))
+			netif_start_queue(dev->net);
+
+		ret = lan78xx_start_tx_path(dev);
+		if (ret < 0)
+			goto out;
+
+		napi_schedule(&dev->napi);
+
+		if (!timer_pending(&dev->stat_monitor)) {
+			dev->delta = 1;
+			mod_timer(&dev->stat_monitor,
+				  jiffies + STAT_UPDATE_TIMER);
+		}
+
+	} else {
+		clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
+	}
+
+	ret = lan78xx_write_reg(dev, WUCSR2, 0);
+	if (ret < 0)
+		goto out;
+	ret = lan78xx_write_reg(dev, WUCSR, 0);
+	if (ret < 0)
+		goto out;
+	ret = lan78xx_write_reg(dev, WK_SRC, 0xFFF1FF1FUL);
+	if (ret < 0)
+		goto out;
+
+	ret = lan78xx_write_reg(dev, WUCSR2, WUCSR2_NS_RCD_ |
+					     WUCSR2_ARP_RCD_ |
+					     WUCSR2_IPV6_TCPSYN_RCD_ |
+					     WUCSR2_IPV4_TCPSYN_RCD_);
+	if (ret < 0)
+		goto out;
+
+	ret = lan78xx_write_reg(dev, WUCSR, WUCSR_EEE_TX_WAKE_ |
+					    WUCSR_EEE_RX_WAKE_ |
+					    WUCSR_PFDA_FR_ |
+					    WUCSR_RFE_WAKE_FR_ |
+					    WUCSR_WUFR_ |
+					    WUCSR_MPR_ |
+					    WUCSR_BCST_FR_);
+	if (ret < 0)
+		goto out;
+
+	ret = 0;
+out:
+	mutex_unlock(&dev->dev_mutex);
+
+	return ret;
+}
+
+static int lan78xx_reset_resume(struct usb_interface *intf)
+{
+	struct lan78xx_net *dev = usb_get_intfdata(intf);
+	int ret;
+
+	netif_dbg(dev, ifup, dev->net, "(reset) resuming device");
+
+	ret = lan78xx_reset(dev);
+	if (ret < 0)
+		return ret;
+
+	phy_start(dev->net->phydev);
+
+	ret = lan78xx_resume(intf);
+
+	return ret;
+}
+
+static const struct usb_device_id products[] = {
+	{
+	/* LAN7800 USB Gigabit Ethernet Device */
+	USB_DEVICE(LAN78XX_USB_VENDOR_ID, LAN7800_USB_PRODUCT_ID),
+	},
+	{
+	/* LAN7850 USB Gigabit Ethernet Device */
+	USB_DEVICE(LAN78XX_USB_VENDOR_ID, LAN7850_USB_PRODUCT_ID),
+	},
+	{
+	/* LAN7801 USB Gigabit Ethernet Device */
+	USB_DEVICE(LAN78XX_USB_VENDOR_ID, LAN7801_USB_PRODUCT_ID),
+	},
+	{
+	/* ATM2-AF USB Gigabit Ethernet Device */
+	USB_DEVICE(AT29M2AF_USB_VENDOR_ID, AT29M2AF_USB_PRODUCT_ID),
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver lan78xx_driver = {
+	.name			= DRIVER_NAME,
+	.id_table		= products,
+	.probe			= lan78xx_probe,
+	.disconnect		= lan78xx_disconnect,
+	.suspend		= lan78xx_suspend,
+	.resume			= lan78xx_resume,
+	.reset_resume		= lan78xx_reset_resume,
+	.supports_autosuspend	= 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(lan78xx_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/lan78xx.h b/drivers/net/usb/lan78xx.h
new file mode 100644
index 000000000..968e5e5fa
--- /dev/null
+++ b/drivers/net/usb/lan78xx.h
@@ -0,0 +1,879 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2015 Microchip Technology
+ */
+#ifndef _LAN78XX_H
+#define _LAN78XX_H
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER	0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER	0xA1
+#define USB_VENDOR_REQUEST_GET_STATS		0xA2
+
+/* Interrupt Endpoint status word bitfields */
+#define INT_ENP_EEE_START_TX_LPI_INT		BIT(26)
+#define INT_ENP_EEE_STOP_TX_LPI_INT		BIT(25)
+#define INT_ENP_EEE_RX_LPI_INT			BIT(24)
+#define INT_ENP_RDFO_INT			BIT(22)
+#define INT_ENP_TXE_INT				BIT(21)
+#define INT_ENP_TX_DIS_INT			BIT(19)
+#define INT_ENP_RX_DIS_INT			BIT(18)
+#define INT_ENP_PHY_INT				BIT(17)
+#define INT_ENP_DP_INT				BIT(16)
+#define INT_ENP_MAC_ERR_INT			BIT(15)
+#define INT_ENP_TDFU_INT			BIT(14)
+#define INT_ENP_TDFO_INT			BIT(13)
+#define INT_ENP_UTX_FP_INT			BIT(12)
+
+#define TX_PKT_ALIGNMENT			4
+#define RX_PKT_ALIGNMENT			4
+
+/* Tx Command A */
+#define TX_CMD_A_IGE_			(0x20000000)
+#define TX_CMD_A_ICE_			(0x10000000)
+#define TX_CMD_A_LSO_			(0x08000000)
+#define TX_CMD_A_IPE_			(0x04000000)
+#define TX_CMD_A_TPE_			(0x02000000)
+#define TX_CMD_A_IVTG_			(0x01000000)
+#define TX_CMD_A_RVTG_			(0x00800000)
+#define TX_CMD_A_FCS_			(0x00400000)
+#define TX_CMD_A_LEN_MASK_		(0x000FFFFF)
+
+/* Tx Command B */
+#define TX_CMD_B_MSS_SHIFT_		(16)
+#define TX_CMD_B_MSS_MASK_		(0x3FFF0000)
+#define TX_CMD_B_MSS_MIN_		((unsigned short)8)
+#define TX_CMD_B_VTAG_MASK_		(0x0000FFFF)
+#define TX_CMD_B_VTAG_PRI_MASK_		(0x0000E000)
+#define TX_CMD_B_VTAG_CFI_MASK_		(0x00001000)
+#define TX_CMD_B_VTAG_VID_MASK_		(0x00000FFF)
+
+/* Rx Command A */
+#define RX_CMD_A_ICE_			(0x80000000)
+#define RX_CMD_A_TCE_			(0x40000000)
+#define RX_CMD_A_CSE_MASK_		(0xC0000000)
+#define RX_CMD_A_IPV_			(0x20000000)
+#define RX_CMD_A_PID_MASK_		(0x18000000)
+#define RX_CMD_A_PID_NONE_IP_		(0x00000000)
+#define RX_CMD_A_PID_TCP_IP_		(0x08000000)
+#define RX_CMD_A_PID_UDP_IP_		(0x10000000)
+#define RX_CMD_A_PID_IP_		(0x18000000)
+#define RX_CMD_A_PFF_			(0x04000000)
+#define RX_CMD_A_BAM_			(0x02000000)
+#define RX_CMD_A_MAM_			(0x01000000)
+#define RX_CMD_A_FVTG_			(0x00800000)
+#define RX_CMD_A_RED_			(0x00400000)
+#define RX_CMD_A_RX_ERRS_MASK_		(0xC03F0000)
+#define RX_CMD_A_RWT_			(0x00200000)
+#define RX_CMD_A_RUNT_			(0x00100000)
+#define RX_CMD_A_LONG_			(0x00080000)
+#define RX_CMD_A_RXE_			(0x00040000)
+#define RX_CMD_A_DRB_			(0x00020000)
+#define RX_CMD_A_FCS_			(0x00010000)
+#define RX_CMD_A_UAM_			(0x00008000)
+#define RX_CMD_A_ICSM_			(0x00004000)
+#define RX_CMD_A_LEN_MASK_		(0x00003FFF)
+
+/* Rx Command B */
+#define RX_CMD_B_CSUM_SHIFT_		(16)
+#define RX_CMD_B_CSUM_MASK_		(0xFFFF0000)
+#define RX_CMD_B_VTAG_MASK_		(0x0000FFFF)
+#define RX_CMD_B_VTAG_PRI_MASK_		(0x0000E000)
+#define RX_CMD_B_VTAG_CFI_MASK_		(0x00001000)
+#define RX_CMD_B_VTAG_VID_MASK_		(0x00000FFF)
+
+/* Rx Command C */
+#define RX_CMD_C_WAKE_SHIFT_		(15)
+#define RX_CMD_C_WAKE_			(0x8000)
+#define RX_CMD_C_REF_FAIL_SHIFT_	(14)
+#define RX_CMD_C_REF_FAIL_		(0x4000)
+
+/* SCSRs */
+#define NUMBER_OF_REGS			(193)
+
+#define ID_REV				(0x00)
+#define ID_REV_CHIP_ID_MASK_		(0xFFFF0000)
+#define ID_REV_CHIP_REV_MASK_		(0x0000FFFF)
+#define ID_REV_CHIP_ID_7800_		(0x7800)
+#define ID_REV_CHIP_ID_7850_		(0x7850)
+#define ID_REV_CHIP_ID_7801_		(0x7801)
+
+#define FPGA_REV			(0x04)
+#define FPGA_REV_MINOR_MASK_		(0x0000FF00)
+#define FPGA_REV_MAJOR_MASK_		(0x000000FF)
+
+#define INT_STS				(0x0C)
+#define INT_STS_CLEAR_ALL_		(0xFFFFFFFF)
+#define INT_STS_EEE_TX_LPI_STRT_	(0x04000000)
+#define INT_STS_EEE_TX_LPI_STOP_	(0x02000000)
+#define INT_STS_EEE_RX_LPI_		(0x01000000)
+#define INT_STS_RDFO_			(0x00400000)
+#define INT_STS_TXE_			(0x00200000)
+#define INT_STS_TX_DIS_			(0x00080000)
+#define INT_STS_RX_DIS_			(0x00040000)
+#define INT_STS_PHY_INT_		(0x00020000)
+#define INT_STS_DP_INT_			(0x00010000)
+#define INT_STS_MAC_ERR_		(0x00008000)
+#define INT_STS_TDFU_			(0x00004000)
+#define INT_STS_TDFO_			(0x00002000)
+#define INT_STS_UFX_FP_			(0x00001000)
+#define INT_STS_GPIO_MASK_		(0x00000FFF)
+#define INT_STS_GPIO11_			(0x00000800)
+#define INT_STS_GPIO10_			(0x00000400)
+#define INT_STS_GPIO9_			(0x00000200)
+#define INT_STS_GPIO8_			(0x00000100)
+#define INT_STS_GPIO7_			(0x00000080)
+#define INT_STS_GPIO6_			(0x00000040)
+#define INT_STS_GPIO5_			(0x00000020)
+#define INT_STS_GPIO4_			(0x00000010)
+#define INT_STS_GPIO3_			(0x00000008)
+#define INT_STS_GPIO2_			(0x00000004)
+#define INT_STS_GPIO1_			(0x00000002)
+#define INT_STS_GPIO0_			(0x00000001)
+
+#define HW_CFG				(0x010)
+#define HW_CFG_CLK125_EN_		(0x02000000)
+#define HW_CFG_REFCLK25_EN_		(0x01000000)
+#define HW_CFG_LED3_EN_			(0x00800000)
+#define HW_CFG_LED2_EN_			(0x00400000)
+#define HW_CFG_LED1_EN_			(0x00200000)
+#define HW_CFG_LED0_EN_			(0x00100000)
+#define HW_CFG_EEE_PHY_LUSU_		(0x00020000)
+#define HW_CFG_EEE_TSU_			(0x00010000)
+#define HW_CFG_NETDET_STS_		(0x00008000)
+#define HW_CFG_NETDET_EN_		(0x00004000)
+#define HW_CFG_EEM_			(0x00002000)
+#define HW_CFG_RST_PROTECT_		(0x00001000)
+#define HW_CFG_CONNECT_BUF_		(0x00000400)
+#define HW_CFG_CONNECT_EN_		(0x00000200)
+#define HW_CFG_CONNECT_POL_		(0x00000100)
+#define HW_CFG_SUSPEND_N_SEL_MASK_	(0x000000C0)
+#define HW_CFG_SUSPEND_N_SEL_2		(0x00000000)
+#define HW_CFG_SUSPEND_N_SEL_12N	(0x00000040)
+#define HW_CFG_SUSPEND_N_SEL_012N	(0x00000080)
+#define HW_CFG_SUSPEND_N_SEL_0123N	(0x000000C0)
+#define HW_CFG_SUSPEND_N_POL_		(0x00000020)
+#define HW_CFG_MEF_			(0x00000010)
+#define HW_CFG_ETC_			(0x00000008)
+#define HW_CFG_LRST_			(0x00000002)
+#define HW_CFG_SRST_			(0x00000001)
+
+#define PMT_CTL				(0x014)
+#define PMT_CTL_EEE_WAKEUP_EN_		(0x00002000)
+#define PMT_CTL_EEE_WUPS_		(0x00001000)
+#define PMT_CTL_MAC_SRST_		(0x00000800)
+#define PMT_CTL_PHY_PWRUP_		(0x00000400)
+#define PMT_CTL_RES_CLR_WKP_MASK_	(0x00000300)
+#define PMT_CTL_RES_CLR_WKP_STS_	(0x00000200)
+#define PMT_CTL_RES_CLR_WKP_EN_		(0x00000100)
+#define PMT_CTL_READY_			(0x00000080)
+#define PMT_CTL_SUS_MODE_MASK_		(0x00000060)
+#define PMT_CTL_SUS_MODE_0_		(0x00000000)
+#define PMT_CTL_SUS_MODE_1_		(0x00000020)
+#define PMT_CTL_SUS_MODE_2_		(0x00000040)
+#define PMT_CTL_SUS_MODE_3_		(0x00000060)
+#define PMT_CTL_PHY_RST_		(0x00000010)
+#define PMT_CTL_WOL_EN_			(0x00000008)
+#define PMT_CTL_PHY_WAKE_EN_		(0x00000004)
+#define PMT_CTL_WUPS_MASK_		(0x00000003)
+#define PMT_CTL_WUPS_MLT_		(0x00000003)
+#define PMT_CTL_WUPS_MAC_		(0x00000002)
+#define PMT_CTL_WUPS_PHY_		(0x00000001)
+
+#define GPIO_CFG0			(0x018)
+#define GPIO_CFG0_GPIOEN_MASK_		(0x0000F000)
+#define GPIO_CFG0_GPIOEN3_		(0x00008000)
+#define GPIO_CFG0_GPIOEN2_		(0x00004000)
+#define GPIO_CFG0_GPIOEN1_		(0x00002000)
+#define GPIO_CFG0_GPIOEN0_		(0x00001000)
+#define GPIO_CFG0_GPIOBUF_MASK_		(0x00000F00)
+#define GPIO_CFG0_GPIOBUF3_		(0x00000800)
+#define GPIO_CFG0_GPIOBUF2_		(0x00000400)
+#define GPIO_CFG0_GPIOBUF1_		(0x00000200)
+#define GPIO_CFG0_GPIOBUF0_		(0x00000100)
+#define GPIO_CFG0_GPIODIR_MASK_		(0x000000F0)
+#define GPIO_CFG0_GPIODIR3_		(0x00000080)
+#define GPIO_CFG0_GPIODIR2_		(0x00000040)
+#define GPIO_CFG0_GPIODIR1_		(0x00000020)
+#define GPIO_CFG0_GPIODIR0_		(0x00000010)
+#define GPIO_CFG0_GPIOD_MASK_		(0x0000000F)
+#define GPIO_CFG0_GPIOD3_		(0x00000008)
+#define GPIO_CFG0_GPIOD2_		(0x00000004)
+#define GPIO_CFG0_GPIOD1_		(0x00000002)
+#define GPIO_CFG0_GPIOD0_		(0x00000001)
+
+#define GPIO_CFG1			(0x01C)
+#define GPIO_CFG1_GPIOEN_MASK_		(0xFF000000)
+#define GPIO_CFG1_GPIOEN11_		(0x80000000)
+#define GPIO_CFG1_GPIOEN10_		(0x40000000)
+#define GPIO_CFG1_GPIOEN9_		(0x20000000)
+#define GPIO_CFG1_GPIOEN8_		(0x10000000)
+#define GPIO_CFG1_GPIOEN7_		(0x08000000)
+#define GPIO_CFG1_GPIOEN6_		(0x04000000)
+#define GPIO_CFG1_GPIOEN5_		(0x02000000)
+#define GPIO_CFG1_GPIOEN4_		(0x01000000)
+#define GPIO_CFG1_GPIOBUF_MASK_		(0x00FF0000)
+#define GPIO_CFG1_GPIOBUF11_		(0x00800000)
+#define GPIO_CFG1_GPIOBUF10_		(0x00400000)
+#define GPIO_CFG1_GPIOBUF9_		(0x00200000)
+#define GPIO_CFG1_GPIOBUF8_		(0x00100000)
+#define GPIO_CFG1_GPIOBUF7_		(0x00080000)
+#define GPIO_CFG1_GPIOBUF6_		(0x00040000)
+#define GPIO_CFG1_GPIOBUF5_		(0x00020000)
+#define GPIO_CFG1_GPIOBUF4_		(0x00010000)
+#define GPIO_CFG1_GPIODIR_MASK_		(0x0000FF00)
+#define GPIO_CFG1_GPIODIR11_		(0x00008000)
+#define GPIO_CFG1_GPIODIR10_		(0x00004000)
+#define GPIO_CFG1_GPIODIR9_		(0x00002000)
+#define GPIO_CFG1_GPIODIR8_		(0x00001000)
+#define GPIO_CFG1_GPIODIR7_		(0x00000800)
+#define GPIO_CFG1_GPIODIR6_		(0x00000400)
+#define GPIO_CFG1_GPIODIR5_		(0x00000200)
+#define GPIO_CFG1_GPIODIR4_		(0x00000100)
+#define GPIO_CFG1_GPIOD_MASK_		(0x000000FF)
+#define GPIO_CFG1_GPIOD11_		(0x00000080)
+#define GPIO_CFG1_GPIOD10_		(0x00000040)
+#define GPIO_CFG1_GPIOD9_		(0x00000020)
+#define GPIO_CFG1_GPIOD8_		(0x00000010)
+#define GPIO_CFG1_GPIOD7_		(0x00000008)
+#define GPIO_CFG1_GPIOD6_		(0x00000004)
+#define GPIO_CFG1_GPIOD6_		(0x00000004)
+#define GPIO_CFG1_GPIOD5_		(0x00000002)
+#define GPIO_CFG1_GPIOD4_		(0x00000001)
+
+#define GPIO_WAKE			(0x020)
+#define GPIO_WAKE_GPIOPOL_MASK_		(0x0FFF0000)
+#define GPIO_WAKE_GPIOPOL11_		(0x08000000)
+#define GPIO_WAKE_GPIOPOL10_		(0x04000000)
+#define GPIO_WAKE_GPIOPOL9_		(0x02000000)
+#define GPIO_WAKE_GPIOPOL8_		(0x01000000)
+#define GPIO_WAKE_GPIOPOL7_		(0x00800000)
+#define GPIO_WAKE_GPIOPOL6_		(0x00400000)
+#define GPIO_WAKE_GPIOPOL5_		(0x00200000)
+#define GPIO_WAKE_GPIOPOL4_		(0x00100000)
+#define GPIO_WAKE_GPIOPOL3_		(0x00080000)
+#define GPIO_WAKE_GPIOPOL2_		(0x00040000)
+#define GPIO_WAKE_GPIOPOL1_		(0x00020000)
+#define GPIO_WAKE_GPIOPOL0_		(0x00010000)
+#define GPIO_WAKE_GPIOWK_MASK_		(0x00000FFF)
+#define GPIO_WAKE_GPIOWK11_		(0x00000800)
+#define GPIO_WAKE_GPIOWK10_		(0x00000400)
+#define GPIO_WAKE_GPIOWK9_		(0x00000200)
+#define GPIO_WAKE_GPIOWK8_		(0x00000100)
+#define GPIO_WAKE_GPIOWK7_		(0x00000080)
+#define GPIO_WAKE_GPIOWK6_		(0x00000040)
+#define GPIO_WAKE_GPIOWK5_		(0x00000020)
+#define GPIO_WAKE_GPIOWK4_		(0x00000010)
+#define GPIO_WAKE_GPIOWK3_		(0x00000008)
+#define GPIO_WAKE_GPIOWK2_		(0x00000004)
+#define GPIO_WAKE_GPIOWK1_		(0x00000002)
+#define GPIO_WAKE_GPIOWK0_		(0x00000001)
+
+#define DP_SEL				(0x024)
+#define DP_SEL_DPRDY_			(0x80000000)
+#define DP_SEL_RSEL_MASK_		(0x0000000F)
+#define DP_SEL_RSEL_USB_PHY_CSRS_	(0x0000000F)
+#define DP_SEL_RSEL_OTP_64BIT_		(0x00000009)
+#define DP_SEL_RSEL_OTP_8BIT_		(0x00000008)
+#define DP_SEL_RSEL_UTX_BUF_RAM_	(0x00000007)
+#define DP_SEL_RSEL_DESC_RAM_		(0x00000005)
+#define DP_SEL_RSEL_TXFIFO_		(0x00000004)
+#define DP_SEL_RSEL_RXFIFO_		(0x00000003)
+#define DP_SEL_RSEL_LSO_		(0x00000002)
+#define DP_SEL_RSEL_VLAN_DA_		(0x00000001)
+#define DP_SEL_RSEL_URXBUF_		(0x00000000)
+#define DP_SEL_VHF_HASH_LEN		(16)
+#define DP_SEL_VHF_VLAN_LEN		(128)
+
+#define DP_CMD				(0x028)
+#define DP_CMD_WRITE_			(0x00000001)
+#define DP_CMD_READ_			(0x00000000)
+
+#define DP_ADDR				(0x02C)
+#define DP_ADDR_MASK_			(0x00003FFF)
+
+#define DP_DATA				(0x030)
+
+#define E2P_CMD				(0x040)
+#define E2P_CMD_EPC_BUSY_		(0x80000000)
+#define E2P_CMD_EPC_CMD_MASK_		(0x70000000)
+#define E2P_CMD_EPC_CMD_RELOAD_		(0x70000000)
+#define E2P_CMD_EPC_CMD_ERAL_		(0x60000000)
+#define E2P_CMD_EPC_CMD_ERASE_		(0x50000000)
+#define E2P_CMD_EPC_CMD_WRAL_		(0x40000000)
+#define E2P_CMD_EPC_CMD_WRITE_		(0x30000000)
+#define E2P_CMD_EPC_CMD_EWEN_		(0x20000000)
+#define E2P_CMD_EPC_CMD_EWDS_		(0x10000000)
+#define E2P_CMD_EPC_CMD_READ_		(0x00000000)
+#define E2P_CMD_EPC_TIMEOUT_		(0x00000400)
+#define E2P_CMD_EPC_DL_			(0x00000200)
+#define E2P_CMD_EPC_ADDR_MASK_		(0x000001FF)
+
+#define E2P_DATA			(0x044)
+#define E2P_DATA_EEPROM_DATA_MASK_	(0x000000FF)
+
+#define BOS_ATTR			(0x050)
+#define BOS_ATTR_BLOCK_SIZE_MASK_	(0x000000FF)
+
+#define SS_ATTR				(0x054)
+#define SS_ATTR_POLL_INT_MASK_		(0x00FF0000)
+#define SS_ATTR_DEV_DESC_SIZE_MASK_	(0x0000FF00)
+#define SS_ATTR_CFG_BLK_SIZE_MASK_	(0x000000FF)
+
+#define HS_ATTR				(0x058)
+#define HS_ATTR_POLL_INT_MASK_		(0x00FF0000)
+#define HS_ATTR_DEV_DESC_SIZE_MASK_	(0x0000FF00)
+#define HS_ATTR_CFG_BLK_SIZE_MASK_	(0x000000FF)
+
+#define FS_ATTR				(0x05C)
+#define FS_ATTR_POLL_INT_MASK_		(0x00FF0000)
+#define FS_ATTR_DEV_DESC_SIZE_MASK_	(0x0000FF00)
+#define FS_ATTR_CFG_BLK_SIZE_MASK_	(0x000000FF)
+
+#define STR_ATTR0			    (0x060)
+#define STR_ATTR0_CFGSTR_DESC_SIZE_MASK_    (0xFF000000)
+#define STR_ATTR0_SERSTR_DESC_SIZE_MASK_    (0x00FF0000)
+#define STR_ATTR0_PRODSTR_DESC_SIZE_MASK_   (0x0000FF00)
+#define STR_ATTR0_MANUF_DESC_SIZE_MASK_     (0x000000FF)
+
+#define STR_ATTR1			    (0x064)
+#define STR_ATTR1_INTSTR_DESC_SIZE_MASK_    (0x000000FF)
+
+#define STR_FLAG_ATTR			    (0x068)
+#define STR_FLAG_ATTR_PME_FLAGS_MASK_	    (0x000000FF)
+
+#define USB_CFG0			(0x080)
+#define USB_CFG_LPM_RESPONSE_		(0x80000000)
+#define USB_CFG_LPM_CAPABILITY_		(0x40000000)
+#define USB_CFG_LPM_ENBL_SLPM_		(0x20000000)
+#define USB_CFG_HIRD_THR_MASK_		(0x1F000000)
+#define USB_CFG_HIRD_THR_960_		(0x1C000000)
+#define USB_CFG_HIRD_THR_885_		(0x1B000000)
+#define USB_CFG_HIRD_THR_810_		(0x1A000000)
+#define USB_CFG_HIRD_THR_735_		(0x19000000)
+#define USB_CFG_HIRD_THR_660_		(0x18000000)
+#define USB_CFG_HIRD_THR_585_		(0x17000000)
+#define USB_CFG_HIRD_THR_510_		(0x16000000)
+#define USB_CFG_HIRD_THR_435_		(0x15000000)
+#define USB_CFG_HIRD_THR_360_		(0x14000000)
+#define USB_CFG_HIRD_THR_285_		(0x13000000)
+#define USB_CFG_HIRD_THR_210_		(0x12000000)
+#define USB_CFG_HIRD_THR_135_		(0x11000000)
+#define USB_CFG_HIRD_THR_60_		(0x10000000)
+#define USB_CFG_MAX_BURST_BI_MASK_	(0x00F00000)
+#define USB_CFG_MAX_BURST_BO_MASK_	(0x000F0000)
+#define USB_CFG_MAX_DEV_SPEED_MASK_	(0x0000E000)
+#define USB_CFG_MAX_DEV_SPEED_SS_	(0x00008000)
+#define USB_CFG_MAX_DEV_SPEED_HS_	(0x00000000)
+#define USB_CFG_MAX_DEV_SPEED_FS_	(0x00002000)
+#define USB_CFG_PHY_BOOST_MASK_		(0x00000180)
+#define USB_CFG_PHY_BOOST_PLUS_12_	(0x00000180)
+#define USB_CFG_PHY_BOOST_PLUS_8_	(0x00000100)
+#define USB_CFG_PHY_BOOST_PLUS_4_	(0x00000080)
+#define USB_CFG_PHY_BOOST_NORMAL_	(0x00000000)
+#define USB_CFG_BIR_			(0x00000040)
+#define USB_CFG_BCE_			(0x00000020)
+#define USB_CFG_PORT_SWAP_		(0x00000010)
+#define USB_CFG_LPM_EN_			(0x00000008)
+#define USB_CFG_RMT_WKP_		(0x00000004)
+#define USB_CFG_PWR_SEL_		(0x00000002)
+#define USB_CFG_STALL_BO_DIS_		(0x00000001)
+
+#define USB_CFG1			(0x084)
+#define USB_CFG1_U1_TIMEOUT_MASK_	(0xFF000000)
+#define USB_CFG1_U2_TIMEOUT_MASK_	(0x00FF0000)
+#define USB_CFG1_HS_TOUT_CAL_MASK_	(0x0000E000)
+#define USB_CFG1_DEV_U2_INIT_EN_	(0x00001000)
+#define USB_CFG1_DEV_U2_EN_		(0x00000800)
+#define USB_CFG1_DEV_U1_INIT_EN_	(0x00000400)
+#define USB_CFG1_DEV_U1_EN_		(0x00000200)
+#define USB_CFG1_LTM_ENABLE_		(0x00000100)
+#define USB_CFG1_FS_TOUT_CAL_MASK_	(0x00000070)
+#define USB_CFG1_SCALE_DOWN_MASK_	(0x00000003)
+#define USB_CFG1_SCALE_DOWN_MODE3_	(0x00000003)
+#define USB_CFG1_SCALE_DOWN_MODE2_	(0x00000002)
+#define USB_CFG1_SCALE_DOWN_MODE1_	(0x00000001)
+#define USB_CFG1_SCALE_DOWN_MODE0_	(0x00000000)
+
+#define USB_CFG2			    (0x088)
+#define USB_CFG2_SS_DETACH_TIME_MASK_	    (0xFFFF0000)
+#define USB_CFG2_HS_DETACH_TIME_MASK_	    (0x0000FFFF)
+
+#define BURST_CAP			(0x090)
+#define BURST_CAP_SIZE_MASK_		(0x000000FF)
+
+#define BULK_IN_DLY			(0x094)
+#define BULK_IN_DLY_MASK_		(0x0000FFFF)
+
+#define INT_EP_CTL			(0x098)
+#define INT_EP_INTEP_ON_		(0x80000000)
+#define INT_STS_EEE_TX_LPI_STRT_EN_	(0x04000000)
+#define INT_STS_EEE_TX_LPI_STOP_EN_	(0x02000000)
+#define INT_STS_EEE_RX_LPI_EN_		(0x01000000)
+#define INT_EP_RDFO_EN_			(0x00400000)
+#define INT_EP_TXE_EN_			(0x00200000)
+#define INT_EP_TX_DIS_EN_		(0x00080000)
+#define INT_EP_RX_DIS_EN_		(0x00040000)
+#define INT_EP_PHY_INT_EN_		(0x00020000)
+#define INT_EP_DP_INT_EN_		(0x00010000)
+#define INT_EP_MAC_ERR_EN_		(0x00008000)
+#define INT_EP_TDFU_EN_			(0x00004000)
+#define INT_EP_TDFO_EN_			(0x00002000)
+#define INT_EP_UTX_FP_EN_		(0x00001000)
+#define INT_EP_GPIO_EN_MASK_		(0x00000FFF)
+
+#define PIPE_CTL			(0x09C)
+#define PIPE_CTL_TXSWING_		(0x00000040)
+#define PIPE_CTL_TXMARGIN_MASK_		(0x00000038)
+#define PIPE_CTL_TXDEEMPHASIS_MASK_	(0x00000006)
+#define PIPE_CTL_ELASTICITYBUFFERMODE_	(0x00000001)
+
+#define U1_LATENCY			(0xA0)
+#define U2_LATENCY			(0xA4)
+
+#define USB_STATUS			(0x0A8)
+#define USB_STATUS_REMOTE_WK_		(0x00100000)
+#define USB_STATUS_FUNC_REMOTE_WK_	(0x00080000)
+#define USB_STATUS_LTM_ENABLE_		(0x00040000)
+#define USB_STATUS_U2_ENABLE_		(0x00020000)
+#define USB_STATUS_U1_ENABLE_		(0x00010000)
+#define USB_STATUS_SET_SEL_		(0x00000020)
+#define USB_STATUS_REMOTE_WK_STS_	(0x00000010)
+#define USB_STATUS_FUNC_REMOTE_WK_STS_	(0x00000008)
+#define USB_STATUS_LTM_ENABLE_STS_	(0x00000004)
+#define USB_STATUS_U2_ENABLE_STS_	(0x00000002)
+#define USB_STATUS_U1_ENABLE_STS_	(0x00000001)
+
+#define USB_CFG3			(0x0AC)
+#define USB_CFG3_EN_U2_LTM_		(0x40000000)
+#define USB_CFG3_BULK_OUT_NUMP_OVR_	(0x20000000)
+#define USB_CFG3_DIS_FAST_U1_EXIT_	(0x10000000)
+#define USB_CFG3_LPM_NYET_THR_		(0x0F000000)
+#define USB_CFG3_RX_DET_2_POL_LFPS_	(0x00800000)
+#define USB_CFG3_LFPS_FILT_		(0x00400000)
+#define USB_CFG3_SKIP_RX_DET_		(0x00200000)
+#define USB_CFG3_DELAY_P1P2P3_		(0x001C0000)
+#define USB_CFG3_DELAY_PHY_PWR_CHG_	(0x00020000)
+#define USB_CFG3_U1U2_EXIT_FR_		(0x00010000)
+#define USB_CFG3_REQ_P1P2P3		(0x00008000)
+#define USB_CFG3_HST_PRT_CMPL_		(0x00004000)
+#define USB_CFG3_DIS_SCRAMB_		(0x00002000)
+#define USB_CFG3_PWR_DN_SCALE_		(0x00001FFF)
+
+#define RFE_CTL				(0x0B0)
+#define RFE_CTL_IGMP_COE_		(0x00004000)
+#define RFE_CTL_ICMP_COE_		(0x00002000)
+#define RFE_CTL_TCPUDP_COE_		(0x00001000)
+#define RFE_CTL_IP_COE_			(0x00000800)
+#define RFE_CTL_BCAST_EN_		(0x00000400)
+#define RFE_CTL_MCAST_EN_		(0x00000200)
+#define RFE_CTL_UCAST_EN_		(0x00000100)
+#define RFE_CTL_VLAN_STRIP_		(0x00000080)
+#define RFE_CTL_DISCARD_UNTAGGED_	(0x00000040)
+#define RFE_CTL_VLAN_FILTER_		(0x00000020)
+#define RFE_CTL_SA_FILTER_		(0x00000010)
+#define RFE_CTL_MCAST_HASH_		(0x00000008)
+#define RFE_CTL_DA_HASH_		(0x00000004)
+#define RFE_CTL_DA_PERFECT_		(0x00000002)
+#define RFE_CTL_RST_			(0x00000001)
+
+#define VLAN_TYPE			(0x0B4)
+#define VLAN_TYPE_MASK_			(0x0000FFFF)
+
+#define FCT_RX_CTL			(0x0C0)
+#define FCT_RX_CTL_EN_			(0x80000000)
+#define FCT_RX_CTL_RST_			(0x40000000)
+#define FCT_RX_CTL_SBF_			(0x02000000)
+#define FCT_RX_CTL_OVFL_		(0x01000000)
+#define FCT_RX_CTL_DROP_		(0x00800000)
+#define FCT_RX_CTL_NOT_EMPTY_		(0x00400000)
+#define FCT_RX_CTL_EMPTY_		(0x00200000)
+#define FCT_RX_CTL_DIS_			(0x00100000)
+#define FCT_RX_CTL_USED_MASK_		(0x0000FFFF)
+
+#define FCT_TX_CTL			(0x0C4)
+#define FCT_TX_CTL_EN_			(0x80000000)
+#define FCT_TX_CTL_RST_			(0x40000000)
+#define FCT_TX_CTL_NOT_EMPTY_		(0x00400000)
+#define FCT_TX_CTL_EMPTY_		(0x00200000)
+#define FCT_TX_CTL_DIS_			(0x00100000)
+#define FCT_TX_CTL_USED_MASK_		(0x0000FFFF)
+
+#define FCT_RX_FIFO_END			(0x0C8)
+#define FCT_RX_FIFO_END_MASK_		(0x0000007F)
+
+#define FCT_TX_FIFO_END			(0x0CC)
+#define FCT_TX_FIFO_END_MASK_		(0x0000003F)
+
+#define FCT_FLOW			(0x0D0)
+#define FCT_FLOW_OFF_MASK_		(0x00007F00)
+#define FCT_FLOW_ON_MASK_		(0x0000007F)
+
+#define RX_DP_STOR			(0x0D4)
+#define RX_DP_STORE_TOT_RXUSED_MASK_	(0xFFFF0000)
+#define RX_DP_STORE_UTX_RXUSED_MASK_	(0x0000FFFF)
+
+#define TX_DP_STOR			(0x0D8)
+#define TX_DP_STORE_TOT_TXUSED_MASK_	(0xFFFF0000)
+#define TX_DP_STORE_URX_TXUSED_MASK_	(0x0000FFFF)
+
+#define LTM_BELT_IDLE0			(0x0E0)
+#define LTM_BELT_IDLE0_IDLE1000_	(0x0FFF0000)
+#define LTM_BELT_IDLE0_IDLE100_		(0x00000FFF)
+
+#define LTM_BELT_IDLE1			(0x0E4)
+#define LTM_BELT_IDLE1_IDLE10_		(0x00000FFF)
+
+#define LTM_BELT_ACT0			(0x0E8)
+#define LTM_BELT_ACT0_ACT1000_		(0x0FFF0000)
+#define LTM_BELT_ACT0_ACT100_		(0x00000FFF)
+
+#define LTM_BELT_ACT1			(0x0EC)
+#define LTM_BELT_ACT1_ACT10_		(0x00000FFF)
+
+#define LTM_INACTIVE0			(0x0F0)
+#define LTM_INACTIVE0_TIMER1000_	(0xFFFF0000)
+#define LTM_INACTIVE0_TIMER100_		(0x0000FFFF)
+
+#define LTM_INACTIVE1			(0x0F4)
+#define LTM_INACTIVE1_TIMER10_		(0x0000FFFF)
+
+#define MAC_CR				(0x100)
+#define MAC_CR_GMII_EN_			(0x00080000)
+#define MAC_CR_EEE_TX_CLK_STOP_EN_	(0x00040000)
+#define MAC_CR_EEE_EN_			(0x00020000)
+#define MAC_CR_EEE_TLAR_EN_		(0x00010000)
+#define MAC_CR_ADP_			(0x00002000)
+#define MAC_CR_AUTO_DUPLEX_		(0x00001000)
+#define MAC_CR_AUTO_SPEED_		(0x00000800)
+#define MAC_CR_LOOPBACK_		(0x00000400)
+#define MAC_CR_BOLMT_MASK_		(0x000000C0)
+#define MAC_CR_FULL_DUPLEX_		(0x00000008)
+#define MAC_CR_SPEED_MASK_		(0x00000006)
+#define MAC_CR_SPEED_1000_		(0x00000004)
+#define MAC_CR_SPEED_100_		(0x00000002)
+#define MAC_CR_SPEED_10_		(0x00000000)
+#define MAC_CR_RST_			(0x00000001)
+
+#define MAC_RX				(0x104)
+#define MAC_RX_MAX_SIZE_SHIFT_		(16)
+#define MAC_RX_MAX_SIZE_MASK_		(0x3FFF0000)
+#define MAC_RX_FCS_STRIP_		(0x00000010)
+#define MAC_RX_VLAN_FSE_		(0x00000004)
+#define MAC_RX_RXD_			(0x00000002)
+#define MAC_RX_RXEN_			(0x00000001)
+
+#define MAC_TX				(0x108)
+#define MAC_TX_BAD_FCS_			(0x00000004)
+#define MAC_TX_TXD_			(0x00000002)
+#define MAC_TX_TXEN_			(0x00000001)
+
+#define FLOW				(0x10C)
+#define FLOW_CR_FORCE_FC_		(0x80000000)
+#define FLOW_CR_TX_FCEN_		(0x40000000)
+#define FLOW_CR_RX_FCEN_		(0x20000000)
+#define FLOW_CR_FPF_			(0x10000000)
+#define FLOW_CR_FCPT_MASK_		(0x0000FFFF)
+
+#define RAND_SEED			(0x110)
+#define RAND_SEED_MASK_			(0x0000FFFF)
+
+#define ERR_STS				(0x114)
+#define ERR_STS_FERR_			(0x00000100)
+#define ERR_STS_LERR_			(0x00000080)
+#define ERR_STS_RFERR_			(0x00000040)
+#define ERR_STS_ECERR_			(0x00000010)
+#define ERR_STS_ALERR_			(0x00000008)
+#define ERR_STS_URERR_			(0x00000004)
+
+#define RX_ADDRH			(0x118)
+#define RX_ADDRH_MASK_			(0x0000FFFF)
+
+#define RX_ADDRL			(0x11C)
+#define RX_ADDRL_MASK_			(0xFFFFFFFF)
+
+#define MII_ACC				(0x120)
+#define MII_ACC_PHY_ADDR_SHIFT_		(11)
+#define MII_ACC_PHY_ADDR_MASK_		(0x0000F800)
+#define MII_ACC_MIIRINDA_SHIFT_		(6)
+#define MII_ACC_MIIRINDA_MASK_		(0x000007C0)
+#define MII_ACC_MII_READ_		(0x00000000)
+#define MII_ACC_MII_WRITE_		(0x00000002)
+#define MII_ACC_MII_BUSY_		(0x00000001)
+
+#define MII_DATA			(0x124)
+#define MII_DATA_MASK_			(0x0000FFFF)
+
+#define MAC_RGMII_ID			(0x128)
+#define MAC_RGMII_ID_TXC_DELAY_EN_	(0x00000002)
+#define MAC_RGMII_ID_RXC_DELAY_EN_	(0x00000001)
+
+#define EEE_TX_LPI_REQ_DLY		(0x130)
+#define EEE_TX_LPI_REQ_DLY_CNT_MASK_	(0xFFFFFFFF)
+
+#define EEE_TW_TX_SYS			(0x134)
+#define EEE_TW_TX_SYS_CNT1G_MASK_	(0xFFFF0000)
+#define EEE_TW_TX_SYS_CNT100M_MASK_	(0x0000FFFF)
+
+#define EEE_TX_LPI_REM_DLY		(0x138)
+#define EEE_TX_LPI_REM_DLY_CNT_		(0x00FFFFFF)
+
+#define WUCSR				(0x140)
+#define WUCSR_TESTMODE_			(0x80000000)
+#define WUCSR_RFE_WAKE_EN_		(0x00004000)
+#define WUCSR_EEE_TX_WAKE_		(0x00002000)
+#define WUCSR_EEE_TX_WAKE_EN_		(0x00001000)
+#define WUCSR_EEE_RX_WAKE_		(0x00000800)
+#define WUCSR_EEE_RX_WAKE_EN_		(0x00000400)
+#define WUCSR_RFE_WAKE_FR_		(0x00000200)
+#define WUCSR_STORE_WAKE_		(0x00000100)
+#define WUCSR_PFDA_FR_			(0x00000080)
+#define WUCSR_WUFR_			(0x00000040)
+#define WUCSR_MPR_			(0x00000020)
+#define WUCSR_BCST_FR_			(0x00000010)
+#define WUCSR_PFDA_EN_			(0x00000008)
+#define WUCSR_WAKE_EN_			(0x00000004)
+#define WUCSR_MPEN_			(0x00000002)
+#define WUCSR_BCST_EN_			(0x00000001)
+
+#define WK_SRC				(0x144)
+#define WK_SRC_GPIOX_INT_WK_SHIFT_	(20)
+#define WK_SRC_GPIOX_INT_WK_MASK_	(0xFFF00000)
+#define WK_SRC_IPV6_TCPSYN_RCD_WK_	(0x00010000)
+#define WK_SRC_IPV4_TCPSYN_RCD_WK_	(0x00008000)
+#define WK_SRC_EEE_TX_WK_		(0x00004000)
+#define WK_SRC_EEE_RX_WK_		(0x00002000)
+#define WK_SRC_GOOD_FR_WK_		(0x00001000)
+#define WK_SRC_PFDA_FR_WK_		(0x00000800)
+#define WK_SRC_MP_FR_WK_		(0x00000400)
+#define WK_SRC_BCAST_FR_WK_		(0x00000200)
+#define WK_SRC_WU_FR_WK_		(0x00000100)
+#define WK_SRC_WUFF_MATCH_MASK_		(0x0000001F)
+
+#define WUF_CFG0			(0x150)
+#define NUM_OF_WUF_CFG			(32)
+#define WUF_CFG_BEGIN			(WUF_CFG0)
+#define WUF_CFG(index)			(WUF_CFG_BEGIN + (4 * (index)))
+#define WUF_CFGX_EN_			(0x80000000)
+#define WUF_CFGX_TYPE_MASK_		(0x03000000)
+#define WUF_CFGX_TYPE_MCAST_		(0x02000000)
+#define WUF_CFGX_TYPE_ALL_		(0x01000000)
+#define WUF_CFGX_TYPE_UCAST_		(0x00000000)
+#define WUF_CFGX_OFFSET_SHIFT_		(16)
+#define WUF_CFGX_OFFSET_MASK_		(0x00FF0000)
+#define WUF_CFGX_CRC16_MASK_		(0x0000FFFF)
+
+#define WUF_MASK0_0			(0x200)
+#define WUF_MASK0_1			(0x204)
+#define WUF_MASK0_2			(0x208)
+#define WUF_MASK0_3			(0x20C)
+#define NUM_OF_WUF_MASK			(32)
+#define WUF_MASK0_BEGIN			(WUF_MASK0_0)
+#define WUF_MASK1_BEGIN			(WUF_MASK0_1)
+#define WUF_MASK2_BEGIN			(WUF_MASK0_2)
+#define WUF_MASK3_BEGIN			(WUF_MASK0_3)
+#define WUF_MASK0(index)		(WUF_MASK0_BEGIN + (0x10 * (index)))
+#define WUF_MASK1(index)		(WUF_MASK1_BEGIN + (0x10 * (index)))
+#define WUF_MASK2(index)		(WUF_MASK2_BEGIN + (0x10 * (index)))
+#define WUF_MASK3(index)		(WUF_MASK3_BEGIN + (0x10 * (index)))
+
+#define MAF_BASE			(0x400)
+#define MAF_HIX				(0x00)
+#define MAF_LOX				(0x04)
+#define NUM_OF_MAF			(33)
+#define MAF_HI_BEGIN			(MAF_BASE + MAF_HIX)
+#define MAF_LO_BEGIN			(MAF_BASE + MAF_LOX)
+#define MAF_HI(index)			(MAF_BASE + (8 * (index)) + (MAF_HIX))
+#define MAF_LO(index)			(MAF_BASE + (8 * (index)) + (MAF_LOX))
+#define MAF_HI_VALID_			(0x80000000)
+#define MAF_HI_TYPE_MASK_		(0x40000000)
+#define MAF_HI_TYPE_SRC_		(0x40000000)
+#define MAF_HI_TYPE_DST_		(0x00000000)
+#define MAF_HI_ADDR_MASK		(0x0000FFFF)
+#define MAF_LO_ADDR_MASK		(0xFFFFFFFF)
+
+#define WUCSR2				(0x600)
+#define WUCSR2_CSUM_DISABLE_		(0x80000000)
+#define WUCSR2_NA_SA_SEL_		(0x00000100)
+#define WUCSR2_NS_RCD_			(0x00000080)
+#define WUCSR2_ARP_RCD_			(0x00000040)
+#define WUCSR2_IPV6_TCPSYN_RCD_		(0x00000020)
+#define WUCSR2_IPV4_TCPSYN_RCD_		(0x00000010)
+#define WUCSR2_NS_OFFLOAD_EN_		(0x00000008)
+#define WUCSR2_ARP_OFFLOAD_EN_		(0x00000004)
+#define WUCSR2_IPV6_TCPSYN_WAKE_EN_	(0x00000002)
+#define WUCSR2_IPV4_TCPSYN_WAKE_EN_	(0x00000001)
+
+#define NS1_IPV6_ADDR_DEST0		(0x610)
+#define NS1_IPV6_ADDR_DEST1		(0x614)
+#define NS1_IPV6_ADDR_DEST2		(0x618)
+#define NS1_IPV6_ADDR_DEST3		(0x61C)
+
+#define NS1_IPV6_ADDR_SRC0		(0x620)
+#define NS1_IPV6_ADDR_SRC1		(0x624)
+#define NS1_IPV6_ADDR_SRC2		(0x628)
+#define NS1_IPV6_ADDR_SRC3		(0x62C)
+
+#define NS1_ICMPV6_ADDR0_0		(0x630)
+#define NS1_ICMPV6_ADDR0_1		(0x634)
+#define NS1_ICMPV6_ADDR0_2		(0x638)
+#define NS1_ICMPV6_ADDR0_3		(0x63C)
+
+#define NS1_ICMPV6_ADDR1_0		(0x640)
+#define NS1_ICMPV6_ADDR1_1		(0x644)
+#define NS1_ICMPV6_ADDR1_2		(0x648)
+#define NS1_ICMPV6_ADDR1_3		(0x64C)
+
+#define NS2_IPV6_ADDR_DEST0		(0x650)
+#define NS2_IPV6_ADDR_DEST1		(0x654)
+#define NS2_IPV6_ADDR_DEST2		(0x658)
+#define NS2_IPV6_ADDR_DEST3		(0x65C)
+
+#define NS2_IPV6_ADDR_SRC0		(0x660)
+#define NS2_IPV6_ADDR_SRC1		(0x664)
+#define NS2_IPV6_ADDR_SRC2		(0x668)
+#define NS2_IPV6_ADDR_SRC3		(0x66C)
+
+#define NS2_ICMPV6_ADDR0_0		(0x670)
+#define NS2_ICMPV6_ADDR0_1		(0x674)
+#define NS2_ICMPV6_ADDR0_2		(0x678)
+#define NS2_ICMPV6_ADDR0_3		(0x67C)
+
+#define NS2_ICMPV6_ADDR1_0		(0x680)
+#define NS2_ICMPV6_ADDR1_1		(0x684)
+#define NS2_ICMPV6_ADDR1_2		(0x688)
+#define NS2_ICMPV6_ADDR1_3		(0x68C)
+
+#define SYN_IPV4_ADDR_SRC		(0x690)
+#define SYN_IPV4_ADDR_DEST		(0x694)
+#define SYN_IPV4_TCP_PORTS		(0x698)
+#define SYN_IPV4_TCP_PORTS_IPV4_DEST_PORT_SHIFT_    (16)
+#define SYN_IPV4_TCP_PORTS_IPV4_DEST_PORT_MASK_     (0xFFFF0000)
+#define SYN_IPV4_TCP_PORTS_IPV4_SRC_PORT_MASK_	    (0x0000FFFF)
+
+#define SYN_IPV6_ADDR_SRC0		(0x69C)
+#define SYN_IPV6_ADDR_SRC1		(0x6A0)
+#define SYN_IPV6_ADDR_SRC2		(0x6A4)
+#define SYN_IPV6_ADDR_SRC3		(0x6A8)
+
+#define SYN_IPV6_ADDR_DEST0		(0x6AC)
+#define SYN_IPV6_ADDR_DEST1		(0x6B0)
+#define SYN_IPV6_ADDR_DEST2		(0x6B4)
+#define SYN_IPV6_ADDR_DEST3		(0x6B8)
+
+#define SYN_IPV6_TCP_PORTS		(0x6BC)
+#define SYN_IPV6_TCP_PORTS_IPV6_DEST_PORT_SHIFT_    (16)
+#define SYN_IPV6_TCP_PORTS_IPV6_DEST_PORT_MASK_     (0xFFFF0000)
+#define SYN_IPV6_TCP_PORTS_IPV6_SRC_PORT_MASK_	    (0x0000FFFF)
+
+#define ARP_SPA				(0x6C0)
+#define ARP_TPA				(0x6C4)
+
+#define PHY_DEV_ID			(0x700)
+#define PHY_DEV_ID_REV_SHIFT_		(28)
+#define PHY_DEV_ID_REV_SHIFT_		(28)
+#define PHY_DEV_ID_REV_MASK_		(0xF0000000)
+#define PHY_DEV_ID_MODEL_SHIFT_		(22)
+#define PHY_DEV_ID_MODEL_MASK_		(0x0FC00000)
+#define PHY_DEV_ID_OUI_MASK_		(0x003FFFFF)
+
+#define RGMII_TX_BYP_DLL		(0x708)
+#define RGMII_TX_BYP_DLL_TX_TUNE_ADJ_MASK_	(0x000FC00)
+#define RGMII_TX_BYP_DLL_TX_TUNE_SEL_MASK_	(0x00003F0)
+#define RGMII_TX_BYP_DLL_TX_DLL_RESET_		(0x0000002)
+#define RGMII_TX_BYP_DLL_TX_DLL_BYPASS_		(0x0000001)
+
+#define RGMII_RX_BYP_DLL		(0x70C)
+#define RGMII_RX_BYP_DLL_RX_TUNE_ADJ_MASK_	(0x000FC00)
+#define RGMII_RX_BYP_DLL_RX_TUNE_SEL_MASK_	(0x00003F0)
+#define RGMII_RX_BYP_DLL_RX_DLL_RESET_		(0x0000002)
+#define RGMII_RX_BYP_DLL_RX_DLL_BYPASS_		(0x0000001)
+
+#define OTP_BASE_ADDR			(0x00001000)
+#define OTP_ADDR_RANGE_			(0x1FF)
+
+#define OTP_PWR_DN			(OTP_BASE_ADDR + 4 * 0x00)
+#define OTP_PWR_DN_PWRDN_N_		(0x01)
+
+#define OTP_ADDR1			(OTP_BASE_ADDR + 4 * 0x01)
+#define OTP_ADDR1_15_11			(0x1F)
+
+#define OTP_ADDR2			(OTP_BASE_ADDR + 4 * 0x02)
+#define OTP_ADDR2_10_3			(0xFF)
+
+#define OTP_ADDR3			(OTP_BASE_ADDR + 4 * 0x03)
+#define OTP_ADDR3_2_0			(0x03)
+
+#define OTP_PRGM_DATA			(OTP_BASE_ADDR + 4 * 0x04)
+
+#define OTP_PRGM_MODE			(OTP_BASE_ADDR + 4 * 0x05)
+#define OTP_PRGM_MODE_BYTE_		(0x01)
+
+#define OTP_RD_DATA			(OTP_BASE_ADDR + 4 * 0x06)
+
+#define OTP_FUNC_CMD			(OTP_BASE_ADDR + 4 * 0x08)
+#define OTP_FUNC_CMD_RESET_		(0x04)
+#define OTP_FUNC_CMD_PROGRAM_		(0x02)
+#define OTP_FUNC_CMD_READ_		(0x01)
+
+#define OTP_TST_CMD			(OTP_BASE_ADDR + 4 * 0x09)
+#define OTP_TST_CMD_TEST_DEC_SEL_	(0x10)
+#define OTP_TST_CMD_PRGVRFY_		(0x08)
+#define OTP_TST_CMD_WRTEST_		(0x04)
+#define OTP_TST_CMD_TESTDEC_		(0x02)
+#define OTP_TST_CMD_BLANKCHECK_		(0x01)
+
+#define OTP_CMD_GO			(OTP_BASE_ADDR + 4 * 0x0A)
+#define OTP_CMD_GO_GO_			(0x01)
+
+#define OTP_PASS_FAIL			(OTP_BASE_ADDR + 4 * 0x0B)
+#define OTP_PASS_FAIL_PASS_		(0x02)
+#define OTP_PASS_FAIL_FAIL_		(0x01)
+
+#define OTP_STATUS			(OTP_BASE_ADDR + 4 * 0x0C)
+#define OTP_STATUS_OTP_LOCK_		(0x10)
+#define OTP_STATUS_WEB_			(0x08)
+#define OTP_STATUS_PGMEN		(0x04)
+#define OTP_STATUS_CPUMPEN_		(0x02)
+#define OTP_STATUS_BUSY_		(0x01)
+
+#define OTP_MAX_PRG			(OTP_BASE_ADDR + 4 * 0x0D)
+#define OTP_MAX_PRG_MAX_PROG		(0x1F)
+
+#define OTP_INTR_STATUS			(OTP_BASE_ADDR + 4 * 0x10)
+#define OTP_INTR_STATUS_READY_		(0x01)
+
+#define OTP_INTR_MASK			(OTP_BASE_ADDR + 4 * 0x11)
+#define OTP_INTR_MASK_READY_		(0x01)
+
+#define OTP_RSTB_PW1			(OTP_BASE_ADDR + 4 * 0x14)
+#define OTP_RSTB_PW2			(OTP_BASE_ADDR + 4 * 0x15)
+#define OTP_PGM_PW1			(OTP_BASE_ADDR + 4 * 0x18)
+#define OTP_PGM_PW2			(OTP_BASE_ADDR + 4 * 0x19)
+#define OTP_READ_PW1			(OTP_BASE_ADDR + 4 * 0x1C)
+#define OTP_READ_PW2			(OTP_BASE_ADDR + 4 * 0x1D)
+#define OTP_TCRST			(OTP_BASE_ADDR + 4 * 0x20)
+#define OTP_RSRD			(OTP_BASE_ADDR + 4 * 0x21)
+#define OTP_TREADEN_VAL			(OTP_BASE_ADDR + 4 * 0x22)
+#define OTP_TDLES_VAL			(OTP_BASE_ADDR + 4 * 0x23)
+#define OTP_TWWL_VAL			(OTP_BASE_ADDR + 4 * 0x24)
+#define OTP_TDLEH_VAL			(OTP_BASE_ADDR + 4 * 0x25)
+#define OTP_TWPED_VAL			(OTP_BASE_ADDR + 4 * 0x26)
+#define OTP_TPES_VAL			(OTP_BASE_ADDR + 4 * 0x27)
+#define OTP_TCPS_VAL			(OTP_BASE_ADDR + 4 * 0x28)
+#define OTP_TCPH_VAL			(OTP_BASE_ADDR + 4 * 0x29)
+#define OTP_TPGMVFY_VAL			(OTP_BASE_ADDR + 4 * 0x2A)
+#define OTP_TPEH_VAL			(OTP_BASE_ADDR + 4 * 0x2B)
+#define OTP_TPGRST_VAL			(OTP_BASE_ADDR + 4 * 0x2C)
+#define OTP_TCLES_VAL			(OTP_BASE_ADDR + 4 * 0x2D)
+#define OTP_TCLEH_VAL			(OTP_BASE_ADDR + 4 * 0x2E)
+#define OTP_TRDES_VAL			(OTP_BASE_ADDR + 4 * 0x2F)
+#define OTP_TBCACC_VAL			(OTP_BASE_ADDR + 4 * 0x30)
+#define OTP_TAAC_VAL			(OTP_BASE_ADDR + 4 * 0x31)
+#define OTP_TACCT_VAL			(OTP_BASE_ADDR + 4 * 0x32)
+#define OTP_TRDEP_VAL			(OTP_BASE_ADDR + 4 * 0x38)
+#define OTP_TPGSV_VAL			(OTP_BASE_ADDR + 4 * 0x39)
+#define OTP_TPVSR_VAL			(OTP_BASE_ADDR + 4 * 0x3A)
+#define OTP_TPVHR_VAL			(OTP_BASE_ADDR + 4 * 0x3B)
+#define OTP_TPVSA_VAL			(OTP_BASE_ADDR + 4 * 0x3C)
+#endif /* _LAN78XX_H */
diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
new file mode 100644
index 000000000..b2495fa80
--- /dev/null
+++ b/drivers/net/usb/lg-vl600.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ethernet interface part of the LG VL600 LTE modem (4G dongle)
+ *
+ * Copyright (C) 2011 Intel Corporation
+ * Author: Andrzej Zaborowski <balrogg@gmail.com>
+ */
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/if_ether.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+#include <linux/module.h>
+
+/*
+ * The device has a CDC ACM port for modem control (it claims to be
+ * CDC ACM anyway) and a CDC Ethernet port for actual network data.
+ * It will however ignore data on both ports that is not encapsulated
+ * in a specific way, any data returned is also encapsulated the same
+ * way.  The headers don't seem to follow any popular standard.
+ *
+ * This driver adds and strips these headers from the ethernet frames
+ * sent/received from the CDC Ethernet port.  The proprietary header
+ * replaces the standard ethernet header in a packet so only actual
+ * ethernet frames are allowed.  The headers allow some form of
+ * multiplexing by using non standard values of the .h_proto field.
+ * Windows/Mac drivers do send a couple of such frames to the device
+ * during initialisation, with protocol set to 0x0906 or 0x0b06 and (what
+ * seems to be) a flag in the .dummy_flags.  This doesn't seem necessary
+ * for modem operation but can possibly be used for GPS or other functions.
+ */
+
+struct vl600_frame_hdr {
+	__le32 len;
+	__le32 serial;
+	__le32 pkt_cnt;
+	__le32 dummy_flags;
+	__le32 dummy;
+	__le32 magic;
+} __attribute__((packed));
+
+struct vl600_pkt_hdr {
+	__le32 dummy[2];
+	__le32 len;
+	__be16 h_proto;
+} __attribute__((packed));
+
+struct vl600_state {
+	struct sk_buff *current_rx_buf;
+};
+
+static int vl600_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int ret;
+	struct vl600_state *s = kzalloc(sizeof(struct vl600_state), GFP_KERNEL);
+
+	if (!s)
+		return -ENOMEM;
+
+	ret = usbnet_cdc_bind(dev, intf);
+	if (ret) {
+		kfree(s);
+		return ret;
+	}
+
+	dev->driver_priv = s;
+
+	/* ARP packets don't go through, but they're also of no use.  The
+	 * subnet has only two hosts anyway: us and the gateway / DHCP
+	 * server (probably simulated by modem firmware or network operator)
+	 * whose address changes every time we connect to the intarwebz and
+	 * who doesn't bother answering ARP requests either.  So hardware
+	 * addresses have no meaning, the destination and the source of every
+	 * packet depend only on whether it is on the IN or OUT endpoint.  */
+	dev->net->flags |= IFF_NOARP;
+	/* IPv6 NDP relies on multicast.  Enable it by default. */
+	dev->net->flags |= IFF_MULTICAST;
+
+	return ret;
+}
+
+static void vl600_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct vl600_state *s = dev->driver_priv;
+
+	dev_kfree_skb(s->current_rx_buf);
+	kfree(s);
+
+	return usbnet_cdc_unbind(dev, intf);
+}
+
+static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct vl600_frame_hdr *frame;
+	struct vl600_pkt_hdr *packet;
+	struct ethhdr *ethhdr;
+	int packet_len, count;
+	struct sk_buff *buf = skb;
+	struct sk_buff *clone;
+	struct vl600_state *s = dev->driver_priv;
+
+	/* Frame lengths are generally 4B multiplies but every couple of
+	 * hours there's an odd number of bytes sized yet correct frame,
+	 * so don't require this.  */
+
+	/* Allow a packet (or multiple packets batched together) to be
+	 * split across many frames.  We don't allow a new batch to
+	 * begin in the same frame another one is ending however, and no
+	 * leading or trailing pad bytes.  */
+	if (s->current_rx_buf) {
+		frame = (struct vl600_frame_hdr *) s->current_rx_buf->data;
+		if (skb->len + s->current_rx_buf->len >
+				le32_to_cpup(&frame->len)) {
+			netif_err(dev, ifup, dev->net, "Fragment too long\n");
+			dev->net->stats.rx_length_errors++;
+			goto error;
+		}
+
+		buf = s->current_rx_buf;
+		skb_put_data(buf, skb->data, skb->len);
+	} else if (skb->len < 4) {
+		netif_err(dev, ifup, dev->net, "Frame too short\n");
+		dev->net->stats.rx_length_errors++;
+		goto error;
+	}
+
+	frame = (struct vl600_frame_hdr *) buf->data;
+	/* Yes, check that frame->magic == 0x53544448 (or 0x44544d48),
+	 * otherwise we may run out of memory w/a bad packet */
+	if (ntohl(frame->magic) != 0x53544448 &&
+			ntohl(frame->magic) != 0x44544d48)
+		goto error;
+
+	if (buf->len < sizeof(*frame) ||
+			buf->len != le32_to_cpup(&frame->len)) {
+		/* Save this fragment for later assembly */
+		if (s->current_rx_buf)
+			return 0;
+
+		s->current_rx_buf = skb_copy_expand(skb, 0,
+				le32_to_cpup(&frame->len), GFP_ATOMIC);
+		if (!s->current_rx_buf)
+			dev->net->stats.rx_errors++;
+
+		return 0;
+	}
+
+	count = le32_to_cpup(&frame->pkt_cnt);
+
+	skb_pull(buf, sizeof(*frame));
+
+	while (count--) {
+		if (buf->len < sizeof(*packet)) {
+			netif_err(dev, ifup, dev->net, "Packet too short\n");
+			goto error;
+		}
+
+		packet = (struct vl600_pkt_hdr *) buf->data;
+		packet_len = sizeof(*packet) + le32_to_cpup(&packet->len);
+		if (packet_len > buf->len) {
+			netif_err(dev, ifup, dev->net,
+					"Bad packet length stored in header\n");
+			goto error;
+		}
+
+		/* Packet header is same size as the ethernet header
+		 * (sizeof(*packet) == sizeof(*ethhdr)), additionally
+		 * the h_proto field is in the same place so we just leave it
+		 * alone and fill in the remaining fields.
+		 */
+		ethhdr = (struct ethhdr *) skb->data;
+		if (be16_to_cpup(&ethhdr->h_proto) == ETH_P_ARP &&
+				buf->len > 0x26) {
+			/* Copy the addresses from packet contents */
+			memcpy(ethhdr->h_source,
+					&buf->data[sizeof(*ethhdr) + 0x8],
+					ETH_ALEN);
+			memcpy(ethhdr->h_dest,
+					&buf->data[sizeof(*ethhdr) + 0x12],
+					ETH_ALEN);
+		} else {
+			eth_zero_addr(ethhdr->h_source);
+			memcpy(ethhdr->h_dest, dev->net->dev_addr, ETH_ALEN);
+
+			/* Inbound IPv6 packets have an IPv4 ethertype (0x800)
+			 * for some reason.  Peek at the L3 header to check
+			 * for IPv6 packets, and set the ethertype to IPv6
+			 * (0x86dd) so Linux can understand it.
+			 */
+			if ((buf->data[sizeof(*ethhdr)] & 0xf0) == 0x60)
+				ethhdr->h_proto = htons(ETH_P_IPV6);
+		}
+
+		if (count) {
+			/* Not the last packet in this batch */
+			clone = skb_clone(buf, GFP_ATOMIC);
+			if (!clone)
+				goto error;
+
+			skb_trim(clone, packet_len);
+			usbnet_skb_return(dev, clone);
+
+			skb_pull(buf, (packet_len + 3) & ~3);
+		} else {
+			skb_trim(buf, packet_len);
+
+			if (s->current_rx_buf) {
+				usbnet_skb_return(dev, buf);
+				s->current_rx_buf = NULL;
+				return 0;
+			}
+
+			return 1;
+		}
+	}
+
+error:
+	if (s->current_rx_buf) {
+		dev_kfree_skb_any(s->current_rx_buf);
+		s->current_rx_buf = NULL;
+	}
+	dev->net->stats.rx_errors++;
+	return 0;
+}
+
+static struct sk_buff *vl600_tx_fixup(struct usbnet *dev,
+		struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *ret;
+	struct vl600_frame_hdr *frame;
+	struct vl600_pkt_hdr *packet;
+	static uint32_t serial = 1;
+	int orig_len = skb->len - sizeof(struct ethhdr);
+	int full_len = (skb->len + sizeof(struct vl600_frame_hdr) + 3) & ~3;
+
+	frame = (struct vl600_frame_hdr *) skb->data;
+	if (skb->len > sizeof(*frame) && skb->len == le32_to_cpup(&frame->len))
+		return skb; /* Already encapsulated? */
+
+	if (skb->len < sizeof(struct ethhdr))
+		/* Drop, device can only deal with ethernet packets */
+		return NULL;
+
+	if (!skb_cloned(skb)) {
+		int headroom = skb_headroom(skb);
+		int tailroom = skb_tailroom(skb);
+
+		if (tailroom >= full_len - skb->len - sizeof(*frame) &&
+				headroom >= sizeof(*frame))
+			/* There's enough head and tail room */
+			goto encapsulate;
+
+		if (headroom + tailroom + skb->len >= full_len) {
+			/* There's enough total room, just readjust */
+			skb->data = memmove(skb->head + sizeof(*frame),
+					skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+			goto encapsulate;
+		}
+	}
+
+	/* Alloc a new skb with the required size */
+	ret = skb_copy_expand(skb, sizeof(struct vl600_frame_hdr), full_len -
+			skb->len - sizeof(struct vl600_frame_hdr), flags);
+	dev_kfree_skb_any(skb);
+	if (!ret)
+		return ret;
+	skb = ret;
+
+encapsulate:
+	/* Packet header is same size as ethernet packet header
+	 * (sizeof(*packet) == sizeof(struct ethhdr)), additionally the
+	 * h_proto field is in the same place so we just leave it alone and
+	 * overwrite the remaining fields.
+	 */
+	packet = (struct vl600_pkt_hdr *) skb->data;
+	/* The VL600 wants IPv6 packets to have an IPv4 ethertype
+	 * Since this modem only supports IPv4 and IPv6, just set all
+	 * frames to 0x0800 (ETH_P_IP)
+	 */
+	packet->h_proto = htons(ETH_P_IP);
+	memset(&packet->dummy, 0, sizeof(packet->dummy));
+	packet->len = cpu_to_le32(orig_len);
+
+	frame = skb_push(skb, sizeof(*frame));
+	memset(frame, 0, sizeof(*frame));
+	frame->len = cpu_to_le32(full_len);
+	frame->serial = cpu_to_le32(serial++);
+	frame->pkt_cnt = cpu_to_le32(1);
+
+	if (skb->len < full_len) /* Pad */
+		skb_put(skb, full_len - skb->len);
+
+	return skb;
+}
+
+static const struct driver_info	vl600_info = {
+	.description	= "LG VL600 modem",
+	.flags		= FLAG_RX_ASSEMBLE | FLAG_WWAN,
+	.bind		= vl600_bind,
+	.unbind		= vl600_unbind,
+	.status		= usbnet_cdc_status,
+	.rx_fixup	= vl600_rx_fixup,
+	.tx_fixup	= vl600_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE_AND_INTERFACE_INFO(0x1004, 0x61aa, USB_CLASS_COMM,
+				USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+		.driver_info	= (unsigned long) &vl600_info,
+	},
+	{},	/* End */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver lg_vl600_driver = {
+	.name		= "lg-vl600",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.disconnect	= usbnet_disconnect,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(lg_vl600_driver);
+
+MODULE_AUTHOR("Anrzej Zaborowski");
+MODULE_DESCRIPTION("LG-VL600 modem's ethernet link");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
new file mode 100644
index 000000000..fdda06167
--- /dev/null
+++ b/drivers/net/usb/mcs7830.c
@@ -0,0 +1,641 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices
+ *
+ * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
+ *
+ * Copyright (C) 2010 Andreas Mohr <andi@lisas.de>
+ * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ *
+ * Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
+ *
+ * 2010-12-19: add 7832 USB PID ("functionality same as MCS7830"),
+ *             per active notification by manufacturer
+ *
+ * TODO:
+ * - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
+ * - implement ethtool_ops get_pauseparam/set_pauseparam
+ *   via HIF_REG_PAUSE_THRESHOLD (>= revision C only!)
+ * - implement get_eeprom/[set_eeprom]
+ * - switch PHY on/off on ifup/ifdown (perhaps in usbnet.c, via MII)
+ * - mcs7830_get_regs() handling is weird: for rev 2 we return 32 regs,
+ *   can access only ~ 24, remaining user buffer is uninitialized garbage
+ * - anything else?
+ */
+
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+/* requests */
+#define MCS7830_RD_BMREQ	(USB_DIR_IN  | USB_TYPE_VENDOR | \
+				 USB_RECIP_DEVICE)
+#define MCS7830_WR_BMREQ	(USB_DIR_OUT | USB_TYPE_VENDOR | \
+				 USB_RECIP_DEVICE)
+#define MCS7830_RD_BREQ		0x0E
+#define MCS7830_WR_BREQ		0x0D
+
+#define MCS7830_CTRL_TIMEOUT	1000
+#define MCS7830_MAX_MCAST	64
+
+#define MCS7830_VENDOR_ID	0x9710
+#define MCS7832_PRODUCT_ID	0x7832
+#define MCS7830_PRODUCT_ID	0x7830
+#define MCS7730_PRODUCT_ID	0x7730
+
+#define SITECOM_VENDOR_ID	0x0DF6
+#define LN_030_PRODUCT_ID	0x0021
+
+#define MCS7830_MII_ADVERTISE	(ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
+				 ADVERTISE_100HALF | ADVERTISE_10FULL | \
+				 ADVERTISE_10HALF | ADVERTISE_CSMA)
+
+/* HIF_REG_XX corresponding index value */
+enum {
+	HIF_REG_MULTICAST_HASH			= 0x00,
+	HIF_REG_PACKET_GAP1			= 0x08,
+	HIF_REG_PACKET_GAP2			= 0x09,
+	HIF_REG_PHY_DATA			= 0x0a,
+	HIF_REG_PHY_CMD1			= 0x0c,
+	   HIF_REG_PHY_CMD1_READ		= 0x40,
+	   HIF_REG_PHY_CMD1_WRITE		= 0x20,
+	   HIF_REG_PHY_CMD1_PHYADDR		= 0x01,
+	HIF_REG_PHY_CMD2			= 0x0d,
+	   HIF_REG_PHY_CMD2_PEND_FLAG_BIT	= 0x80,
+	   HIF_REG_PHY_CMD2_READY_FLAG_BIT	= 0x40,
+	HIF_REG_CONFIG				= 0x0e,
+	/* hmm, spec sez: "R/W", "Except bit 3" (likely TXENABLE). */
+	   HIF_REG_CONFIG_CFG			= 0x80,
+	   HIF_REG_CONFIG_SPEED100		= 0x40,
+	   HIF_REG_CONFIG_FULLDUPLEX_ENABLE	= 0x20,
+	   HIF_REG_CONFIG_RXENABLE		= 0x10,
+	   HIF_REG_CONFIG_TXENABLE		= 0x08,
+	   HIF_REG_CONFIG_SLEEPMODE		= 0x04,
+	   HIF_REG_CONFIG_ALLMULTICAST		= 0x02,
+	   HIF_REG_CONFIG_PROMISCUOUS		= 0x01,
+	HIF_REG_ETHERNET_ADDR			= 0x0f,
+	HIF_REG_FRAME_DROP_COUNTER		= 0x15, /* 0..ff; reset: 0 */
+	HIF_REG_PAUSE_THRESHOLD			= 0x16,
+	   HIF_REG_PAUSE_THRESHOLD_DEFAULT	= 0,
+};
+
+/* Trailing status byte in Ethernet Rx frame */
+enum {
+	MCS7830_RX_SHORT_FRAME		= 0x01, /* < 64 bytes */
+	MCS7830_RX_LENGTH_ERROR		= 0x02, /* framelen != Ethernet length field */
+	MCS7830_RX_ALIGNMENT_ERROR	= 0x04, /* non-even number of nibbles */
+	MCS7830_RX_CRC_ERROR		= 0x08,
+	MCS7830_RX_LARGE_FRAME		= 0x10, /* > 1518 bytes */
+	MCS7830_RX_FRAME_CORRECT	= 0x20, /* frame is correct */
+	/* [7:6] reserved */
+};
+
+struct mcs7830_data {
+	u8 multi_filter[8];
+	u8 config;
+};
+
+static const char driver_name[] = "MOSCHIP usb-ethernet driver";
+
+static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data)
+{
+	int ret;
+
+	ret = usbnet_read_cmd(dev, MCS7830_RD_BREQ, MCS7830_RD_BMREQ,
+			      0x0000, index, data, size);
+	if (ret < 0)
+		return ret;
+	else if (ret < size)
+		return -ENODATA;
+
+	return ret;
+}
+
+static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, const void *data)
+{
+	return usbnet_write_cmd(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
+				0x0000, index, data, size);
+}
+
+static void mcs7830_set_reg_async(struct usbnet *dev, u16 index, u16 size, void *data)
+{
+	usbnet_write_cmd_async(dev, MCS7830_WR_BREQ, MCS7830_WR_BMREQ,
+				0x0000, index, data, size);
+}
+
+static int mcs7830_hif_get_mac_address(struct usbnet *dev, unsigned char *addr)
+{
+	int ret = mcs7830_get_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int mcs7830_hif_set_mac_address(struct usbnet *dev,
+				       const unsigned char *addr)
+{
+	int ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN, addr);
+
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
+{
+	int ret;
+	struct usbnet *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	ret = mcs7830_hif_set_mac_address(dev, addr->sa_data);
+
+	if (ret < 0)
+		return ret;
+
+	/* it worked --> adopt it on netdev side */
+	eth_hw_addr_set(netdev, addr->sa_data);
+
+	return 0;
+}
+
+static int mcs7830_read_phy(struct usbnet *dev, u8 index)
+{
+	int ret;
+	int i;
+	__le16 val;
+
+	u8 cmd[2] = {
+		HIF_REG_PHY_CMD1_READ | HIF_REG_PHY_CMD1_PHYADDR,
+		HIF_REG_PHY_CMD2_PEND_FLAG_BIT | index,
+	};
+
+	mutex_lock(&dev->phy_mutex);
+	/* write the MII command */
+	ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+	if (ret < 0)
+		goto out;
+
+	/* wait for the data to become valid, should be within < 1ms */
+	for (i = 0; i < 10; i++) {
+		ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+		if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
+			break;
+		ret = -EIO;
+		msleep(1);
+	}
+	if (ret < 0)
+		goto out;
+
+	/* read actual register contents */
+	ret = mcs7830_get_reg(dev, HIF_REG_PHY_DATA, 2, &val);
+	if (ret < 0)
+		goto out;
+	ret = le16_to_cpu(val);
+	dev_dbg(&dev->udev->dev, "read PHY reg %02x: %04x (%d tries)\n",
+		index, val, i);
+out:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int mcs7830_write_phy(struct usbnet *dev, u8 index, u16 val)
+{
+	int ret;
+	int i;
+	__le16 le_val;
+
+	u8 cmd[2] = {
+		HIF_REG_PHY_CMD1_WRITE | HIF_REG_PHY_CMD1_PHYADDR,
+		HIF_REG_PHY_CMD2_PEND_FLAG_BIT | (index & 0x1F),
+	};
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* write the new register contents */
+	le_val = cpu_to_le16(val);
+	ret = mcs7830_set_reg(dev, HIF_REG_PHY_DATA, 2, &le_val);
+	if (ret < 0)
+		goto out;
+
+	/* write the MII command */
+	ret = mcs7830_set_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+	if (ret < 0)
+		goto out;
+
+	/* wait for the command to be accepted by the PHY */
+	for (i = 0; i < 10; i++) {
+		ret = mcs7830_get_reg(dev, HIF_REG_PHY_CMD1, 2, cmd);
+		if ((ret < 0) || (cmd[1] & HIF_REG_PHY_CMD2_READY_FLAG_BIT))
+			break;
+		ret = -EIO;
+		msleep(1);
+	}
+	if (ret < 0)
+		goto out;
+
+	ret = 0;
+	dev_dbg(&dev->udev->dev, "write PHY reg %02x: %04x (%d tries)\n",
+		index, val, i);
+out:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+/*
+ * This algorithm comes from the original mcs7830 version 1.4 driver,
+ * not sure if it is needed.
+ */
+static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode)
+{
+	int ret;
+	/* Enable all media types */
+	ret = mcs7830_write_phy(dev, MII_ADVERTISE, MCS7830_MII_ADVERTISE);
+
+	/* First reset BMCR */
+	if (!ret)
+		ret = mcs7830_write_phy(dev, MII_BMCR, 0x0000);
+	/* Enable Auto Neg */
+	if (!ret)
+		ret = mcs7830_write_phy(dev, MII_BMCR, BMCR_ANENABLE);
+	/* Restart Auto Neg (Keep the Enable Auto Neg Bit Set) */
+	if (!ret)
+		ret = mcs7830_write_phy(dev, MII_BMCR,
+				BMCR_ANENABLE | BMCR_ANRESTART	);
+	return ret;
+}
+
+
+/*
+ * if we can read register 22, the chip revision is C or higher
+ */
+static int mcs7830_get_rev(struct usbnet *dev)
+{
+	u8 dummy[2];
+	int ret;
+	ret = mcs7830_get_reg(dev, HIF_REG_FRAME_DROP_COUNTER, 2, dummy);
+	if (ret > 0)
+		return 2; /* Rev C or later */
+	return 1; /* earlier revision */
+}
+
+/*
+ * On rev. C we need to set the pause threshold
+ */
+static void mcs7830_rev_C_fixup(struct usbnet *dev)
+{
+	u8 pause_threshold = HIF_REG_PAUSE_THRESHOLD_DEFAULT;
+	int retry;
+
+	for (retry = 0; retry < 2; retry++) {
+		if (mcs7830_get_rev(dev) == 2) {
+			dev_info(&dev->udev->dev, "applying rev.C fixup\n");
+			mcs7830_set_reg(dev, HIF_REG_PAUSE_THRESHOLD,
+					1, &pause_threshold);
+		}
+		msleep(1);
+	}
+}
+
+static int mcs7830_mdio_read(struct net_device *netdev, int phy_id,
+			     int location)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	return mcs7830_read_phy(dev, location);
+}
+
+static void mcs7830_mdio_write(struct net_device *netdev, int phy_id,
+				int location, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	mcs7830_write_phy(dev, location, val);
+}
+
+static int mcs7830_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static inline struct mcs7830_data *mcs7830_get_data(struct usbnet *dev)
+{
+	return (struct mcs7830_data *)&dev->data;
+}
+
+static void mcs7830_hif_update_multicast_hash(struct usbnet *dev)
+{
+	struct mcs7830_data *data = mcs7830_get_data(dev);
+	mcs7830_set_reg_async(dev, HIF_REG_MULTICAST_HASH,
+				sizeof data->multi_filter,
+				data->multi_filter);
+}
+
+static void mcs7830_hif_update_config(struct usbnet *dev)
+{
+	/* implementation specific to data->config
+           (argument needs to be heap-based anyway - USB DMA!) */
+	struct mcs7830_data *data = mcs7830_get_data(dev);
+	mcs7830_set_reg_async(dev, HIF_REG_CONFIG, 1, &data->config);
+}
+
+static void mcs7830_data_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct mcs7830_data *data = mcs7830_get_data(dev);
+
+	memset(data->multi_filter, 0, sizeof data->multi_filter);
+
+	data->config = HIF_REG_CONFIG_TXENABLE;
+
+	/* this should not be needed, but it doesn't work otherwise */
+	data->config |= HIF_REG_CONFIG_ALLMULTICAST;
+
+	if (net->flags & IFF_PROMISC) {
+		data->config |= HIF_REG_CONFIG_PROMISCUOUS;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > MCS7830_MAX_MCAST) {
+		data->config |= HIF_REG_CONFIG_ALLMULTICAST;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |= 1 << (crc_bits & 7);
+		}
+	}
+}
+
+static int mcs7830_apply_base_config(struct usbnet *dev)
+{
+	int ret;
+
+	/* re-configure known MAC (suspend case etc.) */
+	ret = mcs7830_hif_set_mac_address(dev, dev->net->dev_addr);
+	if (ret) {
+		dev_info(&dev->udev->dev, "Cannot set MAC address\n");
+		goto out;
+	}
+
+	/* Set up PHY */
+	ret = mcs7830_set_autoneg(dev, 0);
+	if (ret) {
+		dev_info(&dev->udev->dev, "Cannot set autoneg\n");
+		goto out;
+	}
+
+	mcs7830_hif_update_multicast_hash(dev);
+	mcs7830_hif_update_config(dev);
+
+	mcs7830_rev_C_fixup(dev);
+	ret = 0;
+out:
+	return ret;
+}
+
+/* credits go to asix_set_multicast */
+static void mcs7830_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	mcs7830_data_set_multicast(net);
+
+	mcs7830_hif_update_multicast_hash(dev);
+	mcs7830_hif_update_config(dev);
+}
+
+static int mcs7830_get_regs_len(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	switch (mcs7830_get_rev(dev)) {
+	case 1:
+		return 21;
+	case 2:
+		return 32;
+	}
+	return 0;
+}
+
+static void mcs7830_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *drvinfo)
+{
+	usbnet_get_drvinfo(net, drvinfo);
+}
+
+static void mcs7830_get_regs(struct net_device *net, struct ethtool_regs *regs, void *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	regs->version = mcs7830_get_rev(dev);
+	mcs7830_get_reg(dev, 0, regs->len, data);
+}
+
+static const struct ethtool_ops mcs7830_ethtool_ops = {
+	.get_drvinfo		= mcs7830_get_drvinfo,
+	.get_regs_len		= mcs7830_get_regs_len,
+	.get_regs		= mcs7830_get_regs,
+
+	/* common usbnet calls */
+	.get_link		= usbnet_get_link,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.nway_reset		= usbnet_nway_reset,
+	.get_link_ksettings	= usbnet_get_link_ksettings_mii,
+	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
+};
+
+static const struct net_device_ops mcs7830_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= mcs7830_ioctl,
+	.ndo_set_rx_mode	= mcs7830_set_multicast,
+	.ndo_set_mac_address	= mcs7830_set_mac_address,
+};
+
+static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
+{
+	struct net_device *net = dev->net;
+	u8 addr[ETH_ALEN];
+	int ret;
+	int retry;
+
+	/* Initial startup: Gather MAC address setting from EEPROM */
+	ret = -EINVAL;
+	for (retry = 0; retry < 5 && ret; retry++)
+		ret = mcs7830_hif_get_mac_address(dev, addr);
+	if (ret) {
+		dev_warn(&dev->udev->dev, "Cannot read MAC address\n");
+		goto out;
+	}
+	eth_hw_addr_set(net, addr);
+
+	mcs7830_data_set_multicast(net);
+
+	ret = mcs7830_apply_base_config(dev);
+	if (ret)
+		goto out;
+
+	net->ethtool_ops = &mcs7830_ethtool_ops;
+	net->netdev_ops = &mcs7830_netdev_ops;
+
+	/* reserve space for the status byte on rx */
+	dev->rx_urb_size = ETH_FRAME_LEN + 1;
+
+	dev->mii.mdio_read = mcs7830_mdio_read;
+	dev->mii.mdio_write = mcs7830_mdio_write;
+	dev->mii.dev = net;
+	dev->mii.phy_id_mask = 0x3f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = *((u8 *) net->dev_addr + 1);
+
+	ret = usbnet_get_endpoints(dev, udev);
+out:
+	return ret;
+}
+
+/* The chip always appends a status byte that we need to strip */
+static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	u8 status;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len) {
+		dev_err(&dev->udev->dev, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	skb_trim(skb, skb->len - 1);
+	status = skb->data[skb->len];
+
+	if (status != MCS7830_RX_FRAME_CORRECT) {
+		dev_dbg(&dev->udev->dev, "rx fixup status %x\n", status);
+
+		/* hmm, perhaps usbnet.c already sees a globally visible
+		   frame error and increments rx_errors on its own already? */
+		dev->net->stats.rx_errors++;
+
+		if (status &	(MCS7830_RX_SHORT_FRAME
+				|MCS7830_RX_LENGTH_ERROR
+				|MCS7830_RX_LARGE_FRAME))
+			dev->net->stats.rx_length_errors++;
+		if (status & MCS7830_RX_ALIGNMENT_ERROR)
+			dev->net->stats.rx_frame_errors++;
+		if (status & MCS7830_RX_CRC_ERROR)
+			dev->net->stats.rx_crc_errors++;
+	}
+
+	return skb->len > 0;
+}
+
+static void mcs7830_status(struct usbnet *dev, struct urb *urb)
+{
+	u8 *buf = urb->transfer_buffer;
+	bool link, link_changed;
+
+	if (urb->actual_length < 16)
+		return;
+
+	link = !(buf[1] == 0x20);
+	link_changed = netif_carrier_ok(dev->net) != link;
+	if (link_changed) {
+		usbnet_link_change(dev, link, 0);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static const struct driver_info moschip_info = {
+	.description	= "MOSCHIP 7830/7832/7730 usb-NET adapter",
+	.bind		= mcs7830_bind,
+	.rx_fixup	= mcs7830_rx_fixup,
+	.flags		= FLAG_ETHER | FLAG_LINK_INTR,
+	.status		= mcs7830_status,
+	.in		= 1,
+	.out		= 2,
+};
+
+static const struct driver_info sitecom_info = {
+	.description    = "Sitecom LN-30 usb-NET adapter",
+	.bind		= mcs7830_bind,
+	.rx_fixup	= mcs7830_rx_fixup,
+	.flags		= FLAG_ETHER | FLAG_LINK_INTR,
+	.status		= mcs7830_status,
+	.in		= 1,
+	.out		= 2,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7832_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
+		USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
+		.driver_info = (unsigned long) &sitecom_info,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static int mcs7830_reset_resume (struct usb_interface *intf)
+{
+	/* YES, this function is successful enough that ethtool -d
+           does show same output pre-/post-suspend */
+
+	struct usbnet		*dev = usb_get_intfdata(intf);
+
+	mcs7830_apply_base_config(dev);
+
+	usbnet_resume(intf);
+
+	return 0;
+}
+
+static struct usb_driver mcs7830_driver = {
+	.name = driver_name,
+	.id_table = products,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+	.reset_resume = mcs7830_reset_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(mcs7830_driver);
+
+MODULE_DESCRIPTION("USB to network adapter MCS7830)");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/net1080.c b/drivers/net/usb/net1080.c
new file mode 100644
index 000000000..b0c0c9dd6
--- /dev/null
+++ b/drivers/net/usb/net1080.c
@@ -0,0 +1,522 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Net1080 based USB host-to-host cables
+ * Copyright (C) 2000-2005 by David Brownell
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+
+#include <asm/unaligned.h>
+
+
+/*
+ * Netchip 1080 driver ... http://www.netchip.com
+ * (Sept 2004:  End-of-life announcement has been sent.)
+ * Used in (some) LapLink cables
+ */
+
+#define frame_errors	data[1]
+
+/*
+ * NetChip framing of ethernet packets, supporting additional error
+ * checks for links that may drop bulk packets from inside messages.
+ * Odd USB length == always short read for last usb packet.
+ *	- nc_header
+ *	- Ethernet header (14 bytes)
+ *	- payload
+ *	- (optional padding byte, if needed so length becomes odd)
+ *	- nc_trailer
+ *
+ * This framing is to be avoided for non-NetChip devices.
+ */
+
+struct nc_header {		// packed:
+	__le16	hdr_len;		// sizeof nc_header (LE, all)
+	__le16	packet_len;		// payload size (including ethhdr)
+	__le16	packet_id;		// detects dropped packets
+#define MIN_HEADER	6
+
+	// all else is optional, and must start with:
+	// __le16	vendorId;	// from usb-if
+	// __le16	productId;
+} __packed;
+
+#define	PAD_BYTE	((unsigned char)0xAC)
+
+struct nc_trailer {
+	__le16	packet_id;
+} __packed;
+
+// packets may use FLAG_FRAMING_NC and optional pad
+#define FRAMED_SIZE(mtu) (sizeof (struct nc_header) \
+				+ sizeof (struct ethhdr) \
+				+ (mtu) \
+				+ 1 \
+				+ sizeof (struct nc_trailer))
+
+#define MIN_FRAMED	FRAMED_SIZE(0)
+
+/* packets _could_ be up to 64KB... */
+#define NC_MAX_PACKET	32767
+
+
+/*
+ * Zero means no timeout; else, how long a 64 byte bulk packet may be queued
+ * before the hardware drops it.  If that's done, the driver will need to
+ * frame network packets to guard against the dropped USB packets.  The win32
+ * driver sets this for both sides of the link.
+ */
+#define	NC_READ_TTL_MS	((u8)255)	// ms
+
+/*
+ * We ignore most registers and EEPROM contents.
+ */
+#define	REG_USBCTL	((u8)0x04)
+#define REG_TTL		((u8)0x10)
+#define REG_STATUS	((u8)0x11)
+
+/*
+ * Vendor specific requests to read/write data
+ */
+#define	REQUEST_REGISTER	((u8)0x10)
+#define	REQUEST_EEPROM		((u8)0x11)
+
+static int
+nc_vendor_read(struct usbnet *dev, u8 req, u8 regnum, u16 *retval_ptr)
+{
+	int status = usbnet_read_cmd(dev, req,
+				     USB_DIR_IN | USB_TYPE_VENDOR |
+				     USB_RECIP_DEVICE,
+				     0, regnum, retval_ptr,
+				     sizeof *retval_ptr);
+	if (status > 0)
+		status = 0;
+	if (!status)
+		le16_to_cpus(retval_ptr);
+	return status;
+}
+
+static inline int
+nc_register_read(struct usbnet *dev, u8 regnum, u16 *retval_ptr)
+{
+	return nc_vendor_read(dev, REQUEST_REGISTER, regnum, retval_ptr);
+}
+
+static void
+nc_vendor_write(struct usbnet *dev, u8 req, u8 regnum, u16 value)
+{
+	usbnet_write_cmd(dev, req,
+			 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			 value, regnum, NULL, 0);
+}
+
+static inline void
+nc_register_write(struct usbnet *dev, u8 regnum, u16 value)
+{
+	nc_vendor_write(dev, REQUEST_REGISTER, regnum, value);
+}
+
+
+#if 0
+static void nc_dump_registers(struct usbnet *dev)
+{
+	u8	reg;
+	u16	*vp = kmalloc(sizeof (u16));
+
+	if (!vp)
+		return;
+
+	netdev_dbg(dev->net, "registers:\n");
+	for (reg = 0; reg < 0x20; reg++) {
+		int retval;
+
+		// reading some registers is trouble
+		if (reg >= 0x08 && reg <= 0xf)
+			continue;
+		if (reg >= 0x12 && reg <= 0x1e)
+			continue;
+
+		retval = nc_register_read(dev, reg, vp);
+		if (retval < 0)
+			netdev_dbg(dev->net, "reg [0x%x] ==> error %d\n",
+				   reg, retval);
+		else
+			netdev_dbg(dev->net, "reg [0x%x] = 0x%x\n", reg, *vp);
+	}
+	kfree(vp);
+}
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Control register
+ */
+
+#define	USBCTL_WRITABLE_MASK	0x1f0f
+// bits 15-13 reserved, r/o
+#define	USBCTL_ENABLE_LANG	(1 << 12)
+#define	USBCTL_ENABLE_MFGR	(1 << 11)
+#define	USBCTL_ENABLE_PROD	(1 << 10)
+#define	USBCTL_ENABLE_SERIAL	(1 << 9)
+#define	USBCTL_ENABLE_DEFAULTS	(1 << 8)
+// bits 7-4 reserved, r/o
+#define	USBCTL_FLUSH_OTHER	(1 << 3)
+#define	USBCTL_FLUSH_THIS	(1 << 2)
+#define	USBCTL_DISCONN_OTHER	(1 << 1)
+#define	USBCTL_DISCONN_THIS	(1 << 0)
+
+static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
+{
+	netif_dbg(dev, link, dev->net,
+		  "net1080 %s-%s usbctl 0x%x:%s%s%s%s%s; this%s%s; other%s%s; r/o 0x%x\n",
+		  dev->udev->bus->bus_name, dev->udev->devpath,
+		  usbctl,
+		  (usbctl & USBCTL_ENABLE_LANG) ? " lang" : "",
+		  (usbctl & USBCTL_ENABLE_MFGR) ? " mfgr" : "",
+		  (usbctl & USBCTL_ENABLE_PROD) ? " prod" : "",
+		  (usbctl & USBCTL_ENABLE_SERIAL) ? " serial" : "",
+		  (usbctl & USBCTL_ENABLE_DEFAULTS) ? " defaults" : "",
+
+		  (usbctl & USBCTL_FLUSH_THIS) ? " FLUSH" : "",
+		  (usbctl & USBCTL_DISCONN_THIS) ? " DIS" : "",
+
+		  (usbctl & USBCTL_FLUSH_OTHER) ? " FLUSH" : "",
+		  (usbctl & USBCTL_DISCONN_OTHER) ? " DIS" : "",
+
+		  usbctl & ~USBCTL_WRITABLE_MASK);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Status register
+ */
+
+#define	STATUS_PORT_A		(1 << 15)
+
+#define	STATUS_CONN_OTHER	(1 << 14)
+#define	STATUS_SUSPEND_OTHER	(1 << 13)
+#define	STATUS_MAILBOX_OTHER	(1 << 12)
+#define	STATUS_PACKETS_OTHER(n)	(((n) >> 8) & 0x03)
+
+#define	STATUS_CONN_THIS	(1 << 6)
+#define	STATUS_SUSPEND_THIS	(1 << 5)
+#define	STATUS_MAILBOX_THIS	(1 << 4)
+#define	STATUS_PACKETS_THIS(n)	(((n) >> 0) & 0x03)
+
+#define	STATUS_UNSPEC_MASK	0x0c8c
+#define	STATUS_NOISE_MASK 	((u16)~(0x0303|STATUS_UNSPEC_MASK))
+
+
+static inline void nc_dump_status(struct usbnet *dev, u16 status)
+{
+	netif_dbg(dev, link, dev->net,
+		  "net1080 %s-%s status 0x%x: this (%c) PKT=%d%s%s%s; other PKT=%d%s%s%s; unspec 0x%x\n",
+		  dev->udev->bus->bus_name, dev->udev->devpath,
+		  status,
+
+		  // XXX the packet counts don't seem right
+		  // (1 at reset, not 0); maybe UNSPEC too
+
+		  (status & STATUS_PORT_A) ? 'A' : 'B',
+		  STATUS_PACKETS_THIS(status),
+		  (status & STATUS_CONN_THIS) ? " CON" : "",
+		  (status & STATUS_SUSPEND_THIS) ? " SUS" : "",
+		  (status & STATUS_MAILBOX_THIS) ? " MBOX" : "",
+
+		  STATUS_PACKETS_OTHER(status),
+		  (status & STATUS_CONN_OTHER) ? " CON" : "",
+		  (status & STATUS_SUSPEND_OTHER) ? " SUS" : "",
+		  (status & STATUS_MAILBOX_OTHER) ? " MBOX" : "",
+
+		  status & STATUS_UNSPEC_MASK);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * TTL register
+ */
+
+#define	TTL_OTHER(ttl)	(0x00ff & (ttl >> 8))
+#define MK_TTL(this,other)	((u16)(((other)<<8)|(0x00ff&(this))))
+
+/*-------------------------------------------------------------------------*/
+
+static int net1080_reset(struct usbnet *dev)
+{
+	u16		usbctl, status, ttl;
+	u16		vp;
+	int		retval;
+
+	// nc_dump_registers(dev);
+
+	if ((retval = nc_register_read(dev, REG_STATUS, &vp)) < 0) {
+		netdev_dbg(dev->net, "can't read %s-%s status: %d\n",
+			   dev->udev->bus->bus_name, dev->udev->devpath, retval);
+		goto done;
+	}
+	status = vp;
+	nc_dump_status(dev, status);
+
+	if ((retval = nc_register_read(dev, REG_USBCTL, &vp)) < 0) {
+		netdev_dbg(dev->net, "can't read USBCTL, %d\n", retval);
+		goto done;
+	}
+	usbctl = vp;
+	nc_dump_usbctl(dev, usbctl);
+
+	nc_register_write(dev, REG_USBCTL,
+			USBCTL_FLUSH_THIS | USBCTL_FLUSH_OTHER);
+
+	if ((retval = nc_register_read(dev, REG_TTL, &vp)) < 0) {
+		netdev_dbg(dev->net, "can't read TTL, %d\n", retval);
+		goto done;
+	}
+	ttl = vp;
+
+	nc_register_write(dev, REG_TTL,
+			MK_TTL(NC_READ_TTL_MS, TTL_OTHER(ttl)) );
+	netdev_dbg(dev->net, "assigned TTL, %d ms\n", NC_READ_TTL_MS);
+
+	netif_info(dev, link, dev->net, "port %c, peer %sconnected\n",
+		   (status & STATUS_PORT_A) ? 'A' : 'B',
+		   (status & STATUS_CONN_OTHER) ? "" : "dis");
+	retval = 0;
+
+done:
+	return retval;
+}
+
+static int net1080_check_connect(struct usbnet *dev)
+{
+	int			retval;
+	u16			status;
+	u16			vp;
+
+	retval = nc_register_read(dev, REG_STATUS, &vp);
+	status = vp;
+	if (retval != 0) {
+		netdev_dbg(dev->net, "net1080_check_conn read - %d\n", retval);
+		return retval;
+	}
+	if ((status & STATUS_CONN_OTHER) != STATUS_CONN_OTHER)
+		return -ENOLINK;
+	return 0;
+}
+
+static void nc_ensure_sync(struct usbnet *dev)
+{
+	if (++dev->frame_errors <= 5)
+		return;
+
+	if (usbnet_write_cmd_async(dev, REQUEST_REGISTER,
+					USB_DIR_OUT | USB_TYPE_VENDOR |
+					USB_RECIP_DEVICE,
+					USBCTL_FLUSH_THIS |
+					USBCTL_FLUSH_OTHER,
+					REG_USBCTL, NULL, 0))
+		return;
+
+	netif_dbg(dev, rx_err, dev->net,
+		  "flush net1080; too many framing errors\n");
+	dev->frame_errors = 0;
+}
+
+static int net1080_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct nc_header	*header;
+	struct nc_trailer	*trailer;
+	u16			hdr_len, packet_len;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	if (!(skb->len & 0x01)) {
+		netdev_dbg(dev->net, "rx framesize %d range %d..%d mtu %d\n",
+			   skb->len, dev->net->hard_header_len, dev->hard_mtu,
+			   dev->net->mtu);
+		dev->net->stats.rx_frame_errors++;
+		nc_ensure_sync(dev);
+		return 0;
+	}
+
+	header = (struct nc_header *) skb->data;
+	hdr_len = le16_to_cpup(&header->hdr_len);
+	packet_len = le16_to_cpup(&header->packet_len);
+	if (FRAMED_SIZE(packet_len) > NC_MAX_PACKET) {
+		dev->net->stats.rx_frame_errors++;
+		netdev_dbg(dev->net, "packet too big, %d\n", packet_len);
+		nc_ensure_sync(dev);
+		return 0;
+	} else if (hdr_len < MIN_HEADER) {
+		dev->net->stats.rx_frame_errors++;
+		netdev_dbg(dev->net, "header too short, %d\n", hdr_len);
+		nc_ensure_sync(dev);
+		return 0;
+	} else if (hdr_len > MIN_HEADER) {
+		// out of band data for us?
+		netdev_dbg(dev->net, "header OOB, %d bytes\n", hdr_len - MIN_HEADER);
+		nc_ensure_sync(dev);
+		// switch (vendor/product ids) { ... }
+	}
+	skb_pull(skb, hdr_len);
+
+	trailer = (struct nc_trailer *)
+		(skb->data + skb->len - sizeof *trailer);
+	skb_trim(skb, skb->len - sizeof *trailer);
+
+	if ((packet_len & 0x01) == 0) {
+		if (skb->data [packet_len] != PAD_BYTE) {
+			dev->net->stats.rx_frame_errors++;
+			netdev_dbg(dev->net, "bad pad\n");
+			return 0;
+		}
+		skb_trim(skb, skb->len - 1);
+	}
+	if (skb->len != packet_len) {
+		dev->net->stats.rx_frame_errors++;
+		netdev_dbg(dev->net, "bad packet len %d (expected %d)\n",
+			   skb->len, packet_len);
+		nc_ensure_sync(dev);
+		return 0;
+	}
+	if (header->packet_id != get_unaligned(&trailer->packet_id)) {
+		dev->net->stats.rx_fifo_errors++;
+		netdev_dbg(dev->net, "(2+ dropped) rx packet_id mismatch 0x%x 0x%x\n",
+			   le16_to_cpu(header->packet_id),
+			   le16_to_cpu(trailer->packet_id));
+		return 0;
+	}
+#if 0
+	netdev_dbg(dev->net, "frame <rx h %d p %d id %d\n", header->hdr_len,
+		   header->packet_len, header->packet_id);
+#endif
+	dev->frame_errors = 0;
+	return 1;
+}
+
+static struct sk_buff *
+net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff		*skb2;
+	struct nc_header	*header = NULL;
+	struct nc_trailer	*trailer = NULL;
+	int			padlen = sizeof (struct nc_trailer);
+	int			len = skb->len;
+
+	if (!((len + padlen + sizeof (struct nc_header)) & 0x01))
+		padlen++;
+	if (!skb_cloned(skb)) {
+		int	headroom = skb_headroom(skb);
+		int	tailroom = skb_tailroom(skb);
+
+		if (padlen <= tailroom &&
+		    sizeof(struct nc_header) <= headroom)
+			/* There's enough head and tail room */
+			goto encapsulate;
+
+		if ((sizeof (struct nc_header) + padlen) <
+				(headroom + tailroom)) {
+			/* There's enough total room, so just readjust */
+			skb->data = memmove(skb->head
+						+ sizeof (struct nc_header),
+					    skb->data, skb->len);
+			skb_set_tail_pointer(skb, len);
+			goto encapsulate;
+		}
+	}
+
+	/* Create a new skb to use with the correct size */
+	skb2 = skb_copy_expand(skb,
+				sizeof (struct nc_header),
+				padlen,
+				flags);
+	dev_kfree_skb_any(skb);
+	if (!skb2)
+		return skb2;
+	skb = skb2;
+
+encapsulate:
+	/* header first */
+	header = skb_push(skb, sizeof *header);
+	header->hdr_len = cpu_to_le16(sizeof (*header));
+	header->packet_len = cpu_to_le16(len);
+	header->packet_id = cpu_to_le16((u16)dev->xid++);
+
+	/* maybe pad; then trailer */
+	if (!((skb->len + sizeof *trailer) & 0x01))
+		skb_put_u8(skb, PAD_BYTE);
+	trailer = skb_put(skb, sizeof *trailer);
+	put_unaligned(header->packet_id, &trailer->packet_id);
+#if 0
+	netdev_dbg(dev->net, "frame >tx h %d p %d id %d\n",
+		   header->hdr_len, header->packet_len,
+		   header->packet_id);
+#endif
+	return skb;
+}
+
+static int net1080_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	unsigned	extra = sizeof (struct nc_header)
+				+ 1
+				+ sizeof (struct nc_trailer);
+
+	dev->net->hard_header_len += extra;
+	dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
+	dev->hard_mtu = NC_MAX_PACKET;
+	return usbnet_get_endpoints (dev, intf);
+}
+
+static const struct driver_info	net1080_info = {
+	.description =	"NetChip TurboCONNECT",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_NC,
+	.bind =		net1080_bind,
+	.reset =	net1080_reset,
+	.check_connect = net1080_check_connect,
+	.rx_fixup =	net1080_rx_fixup,
+	.tx_fixup =	net1080_tx_fixup,
+};
+
+static const struct usb_device_id	products [] = {
+{
+	USB_DEVICE(0x0525, 0x1080),	// NetChip ref design
+	.driver_info =	(unsigned long) &net1080_info,
+}, {
+	USB_DEVICE(0x06D0, 0x0622),	// Laplink Gold
+	.driver_info =	(unsigned long) &net1080_info,
+},
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver net1080_driver = {
+	.name =		"net1080",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(net1080_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("NetChip 1080 based USB Host-to-Host Links");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
new file mode 100644
index 000000000..81ca64deb
--- /dev/null
+++ b/drivers/net/usb/pegasus.c
@@ -0,0 +1,1336 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (c) 1999-2021 Petko Manolov (petkan@nucleusys.com)
+ *
+ */
+
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/module.h>
+#include <asm/byteorder.h>
+#include <linux/uaccess.h>
+#include "pegasus.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_AUTHOR "Petko Manolov <petkan@nucleusys.com>"
+#define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver"
+
+static const char driver_name[] = "pegasus";
+
+#undef	PEGASUS_WRITE_EEPROM
+#define	BMSR_MEDIA	(BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | \
+			BMSR_100FULL | BMSR_ANEGCAPABLE)
+#define CARRIER_CHECK_DELAY (2 * HZ)
+
+static bool loopback;
+static bool mii_mode;
+static char *devid;
+
+static struct usb_eth_dev usb_dev_id[] = {
+#define	PEGASUS_DEV(pn, vid, pid, flags)	\
+	{.name = pn, .vendor = vid, .device = pid, .private = flags},
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+	PEGASUS_DEV(pn, vid, pid, flags)
+#include "pegasus.h"
+#undef	PEGASUS_DEV
+#undef	PEGASUS_DEV_CLASS
+	{NULL, 0, 0, 0},
+	{NULL, 0, 0, 0}
+};
+
+static struct usb_device_id pegasus_ids[] = {
+#define	PEGASUS_DEV(pn, vid, pid, flags) \
+	{.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid},
+/*
+ * The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product
+ * IDs as the Belkin F5D5050, so we need to teach the pegasus driver to
+ * ignore adaptors belonging to the "Wireless" class 0xE0. For this one
+ * case anyway, seeing as the pegasus is for "Wired" adaptors.
+ */
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+	{.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS), \
+	.idVendor = vid, .idProduct = pid, .bDeviceClass = dclass},
+#include "pegasus.h"
+#undef	PEGASUS_DEV
+#undef	PEGASUS_DEV_CLASS
+	{},
+	{}
+};
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+module_param(loopback, bool, 0);
+module_param(mii_mode, bool, 0);
+module_param(devid, charp, 0);
+MODULE_PARM_DESC(loopback, "Enable MAC loopback mode (bit 0)");
+MODULE_PARM_DESC(mii_mode, "Enable HomePNA mode (bit 0),default=MII mode = 0");
+MODULE_PARM_DESC(devid, "The format is: 'DEV_name:VendorID:DeviceID:Flags'");
+
+/* use ethtool to change the level for any given device */
+static int msg_level = -1;
+module_param(msg_level, int, 0);
+MODULE_PARM_DESC(msg_level, "Override default message level");
+
+MODULE_DEVICE_TABLE(usb, pegasus_ids);
+static const struct net_device_ops pegasus_netdev_ops;
+
+/*****/
+
+static void async_ctrl_callback(struct urb *urb)
+{
+	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+	int status = urb->status;
+
+	if (status < 0)
+		dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status);
+	kfree(req);
+	usb_free_urb(urb);
+}
+
+static int get_registers(pegasus_t *pegasus, __u16 indx, __u16 size, void *data)
+{
+	return usb_control_msg_recv(pegasus->usb, 0, PEGASUS_REQ_GET_REGS,
+				   PEGASUS_REQT_READ, 0, indx, data, size,
+				   1000, GFP_NOIO);
+}
+
+static int set_registers(pegasus_t *pegasus, __u16 indx, __u16 size,
+			 const void *data)
+{
+	int ret;
+
+	ret = usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REGS,
+				    PEGASUS_REQT_WRITE, 0, indx, data, size,
+				    1000, GFP_NOIO);
+	if (ret < 0)
+		netif_dbg(pegasus, drv, pegasus->net, "%s failed with %d\n", __func__, ret);
+
+	return ret;
+}
+
+/*
+ * There is only one way to write to a single ADM8511 register and this is via
+ * specific control request.  'data' is ignored by the device, but it is here to
+ * not break the API.
+ */
+static int set_register(pegasus_t *pegasus, __u16 indx, __u8 data)
+{
+	void *buf = &data;
+	int ret;
+
+	ret = usb_control_msg_send(pegasus->usb, 0, PEGASUS_REQ_SET_REG,
+				    PEGASUS_REQT_WRITE, data, indx, buf, 1,
+				    1000, GFP_NOIO);
+	if (ret < 0)
+		netif_dbg(pegasus, drv, pegasus->net, "%s failed with %d\n", __func__, ret);
+
+	return ret;
+}
+
+static int update_eth_regs_async(pegasus_t *pegasus)
+{
+	int ret = -ENOMEM;
+	struct urb *async_urb;
+	struct usb_ctrlrequest *req;
+
+	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+	if (req == NULL)
+		return ret;
+
+	async_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (async_urb == NULL) {
+		kfree(req);
+		return ret;
+	}
+	req->bRequestType = PEGASUS_REQT_WRITE;
+	req->bRequest = PEGASUS_REQ_SET_REGS;
+	req->wValue = cpu_to_le16(0);
+	req->wIndex = cpu_to_le16(EthCtrl0);
+	req->wLength = cpu_to_le16(3);
+
+	usb_fill_control_urb(async_urb, pegasus->usb,
+			     usb_sndctrlpipe(pegasus->usb, 0), (void *)req,
+			     pegasus->eth_regs, 3, async_ctrl_callback, req);
+
+	ret = usb_submit_urb(async_urb, GFP_ATOMIC);
+	if (ret) {
+		if (ret == -ENODEV)
+			netif_device_detach(pegasus->net);
+		netif_err(pegasus, drv, pegasus->net,
+			  "%s returned %d\n", __func__, ret);
+	}
+	return ret;
+}
+
+static int __mii_op(pegasus_t *p, __u8 phy, __u8 indx, __u16 *regd, __u8 cmd)
+{
+	int i, ret;
+	__le16 regdi;
+	__u8 data[4] = { phy, 0, 0, indx };
+
+	if (cmd & PHY_WRITE) {
+		__le16 *t = (__le16 *) & data[1];
+		*t = cpu_to_le16(*regd);
+	}
+	set_register(p, PhyCtrl, 0);
+	set_registers(p, PhyAddr, sizeof(data), data);
+	set_register(p, PhyCtrl, (indx | cmd));
+	for (i = 0; i < REG_TIMEOUT; i++) {
+		ret = get_registers(p, PhyCtrl, 1, data);
+		if (ret < 0)
+			goto fail;
+		if (data[0] & PHY_DONE)
+			break;
+	}
+	if (i >= REG_TIMEOUT) {
+		ret = -ETIMEDOUT;
+		goto fail;
+	}
+	if (cmd & PHY_READ) {
+		ret = get_registers(p, PhyData, 2, &regdi);
+		if (ret < 0)
+			goto fail;
+		*regd = le16_to_cpu(regdi);
+	}
+	return 0;
+fail:
+	netif_dbg(p, drv, p->net, "%s failed\n", __func__);
+	return ret;
+}
+
+/* Returns non-negative int on success, error on failure */
+static int read_mii_word(pegasus_t *pegasus, __u8 phy, __u8 indx, __u16 *regd)
+{
+	return __mii_op(pegasus, phy, indx, regd, PHY_READ);
+}
+
+/* Returns zero on success, error on failure */
+static int write_mii_word(pegasus_t *pegasus, __u8 phy, __u8 indx, __u16 *regd)
+{
+	return __mii_op(pegasus, phy, indx, regd, PHY_WRITE);
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int loc)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	int ret;
+	u16 res;
+
+	ret = read_mii_word(pegasus, phy_id, loc, &res);
+	if (ret < 0)
+		return ret;
+
+	return (int)res;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int loc, int val)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	u16 data = val;
+
+	write_mii_word(pegasus, phy_id, loc, &data);
+}
+
+static int read_eprom_word(pegasus_t *pegasus, __u8 index, __u16 *retdata)
+{
+	int ret, i;
+	__le16 retdatai;
+	__u8 tmp = 0;
+
+	set_register(pegasus, EpromCtrl, 0);
+	set_register(pegasus, EpromOffset, index);
+	set_register(pegasus, EpromCtrl, EPROM_READ);
+
+	for (i = 0; i < REG_TIMEOUT; i++) {
+		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+		if (ret < 0)
+			goto fail;
+		if (tmp & EPROM_DONE)
+			break;
+	}
+	if (i >= REG_TIMEOUT) {
+		ret = -ETIMEDOUT;
+		goto fail;
+	}
+
+	ret = get_registers(pegasus, EpromData, 2, &retdatai);
+	if (ret < 0)
+		goto fail;
+	*retdata = le16_to_cpu(retdatai);
+	return ret;
+
+fail:
+	netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+	return ret;
+}
+
+#ifdef	PEGASUS_WRITE_EEPROM
+static inline void enable_eprom_write(pegasus_t *pegasus)
+{
+	__u8 tmp;
+
+	get_registers(pegasus, EthCtrl2, 1, &tmp);
+	set_register(pegasus, EthCtrl2, tmp | EPROM_WR_ENABLE);
+}
+
+static inline void disable_eprom_write(pegasus_t *pegasus)
+{
+	__u8 tmp;
+
+	get_registers(pegasus, EthCtrl2, 1, &tmp);
+	set_register(pegasus, EpromCtrl, 0);
+	set_register(pegasus, EthCtrl2, tmp & ~EPROM_WR_ENABLE);
+}
+
+static int write_eprom_word(pegasus_t *pegasus, __u8 index, __u16 data)
+{
+	int i;
+	__u8 tmp, d[4] = { 0x3f, 0, 0, EPROM_WRITE };
+	int ret;
+	__le16 le_data = cpu_to_le16(data);
+
+	set_registers(pegasus, EpromOffset, 4, d);
+	enable_eprom_write(pegasus);
+	set_register(pegasus, EpromOffset, index);
+	set_registers(pegasus, EpromData, 2, &le_data);
+	set_register(pegasus, EpromCtrl, EPROM_WRITE);
+
+	for (i = 0; i < REG_TIMEOUT; i++) {
+		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+		if (ret == -ESHUTDOWN)
+			goto fail;
+		if (tmp & EPROM_DONE)
+			break;
+	}
+	disable_eprom_write(pegasus);
+	if (i >= REG_TIMEOUT)
+		goto fail;
+
+	return ret;
+
+fail:
+	netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+	return -ETIMEDOUT;
+}
+#endif	/* PEGASUS_WRITE_EEPROM */
+
+static inline int get_node_id(pegasus_t *pegasus, u8 *id)
+{
+	int i, ret;
+	u16 w16;
+
+	for (i = 0; i < 3; i++) {
+		ret = read_eprom_word(pegasus, i, &w16);
+		if (ret < 0)
+			return ret;
+		((__le16 *) id)[i] = cpu_to_le16(w16);
+	}
+
+	return 0;
+}
+
+static void set_ethernet_addr(pegasus_t *pegasus)
+{
+	int ret;
+	u8 node_id[6];
+
+	if (pegasus->features & PEGASUS_II) {
+		ret = get_registers(pegasus, 0x10, sizeof(node_id), node_id);
+		if (ret < 0)
+			goto err;
+	} else {
+		ret = get_node_id(pegasus, node_id);
+		if (ret < 0)
+			goto err;
+		ret = set_registers(pegasus, EthID, sizeof(node_id), node_id);
+		if (ret < 0)
+			goto err;
+	}
+
+	eth_hw_addr_set(pegasus->net, node_id);
+
+	return;
+err:
+	eth_hw_addr_random(pegasus->net);
+	netif_dbg(pegasus, drv, pegasus->net, "software assigned MAC address.\n");
+
+	return;
+}
+
+static inline int reset_mac(pegasus_t *pegasus)
+{
+	int ret, i;
+	__u8 data = 0x8;
+
+	set_register(pegasus, EthCtrl1, data);
+	for (i = 0; i < REG_TIMEOUT; i++) {
+		ret = get_registers(pegasus, EthCtrl1, 1, &data);
+		if (ret < 0)
+			goto fail;
+		if (~data & 0x08) {
+			if (loopback)
+				break;
+			if (mii_mode && (pegasus->features & HAS_HOME_PNA))
+				set_register(pegasus, Gpio1, 0x34);
+			else
+				set_register(pegasus, Gpio1, 0x26);
+			set_register(pegasus, Gpio0, pegasus->features);
+			set_register(pegasus, Gpio0, DEFAULT_GPIO_SET);
+			break;
+		}
+	}
+	if (i == REG_TIMEOUT)
+		return -ETIMEDOUT;
+
+	if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
+	    usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
+		set_register(pegasus, Gpio0, 0x24);
+		set_register(pegasus, Gpio0, 0x26);
+	}
+	if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_ELCON) {
+		__u16 auxmode;
+		ret = read_mii_word(pegasus, 3, 0x1b, &auxmode);
+		if (ret < 0)
+			goto fail;
+		auxmode |= 4;
+		write_mii_word(pegasus, 3, 0x1b, &auxmode);
+	}
+
+	return 0;
+fail:
+	netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+	return ret;
+}
+
+static int enable_net_traffic(struct net_device *dev, struct usb_device *usb)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	int ret;
+	__u16 linkpart;
+	__u8 data[4];
+
+	ret = read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart);
+	if (ret < 0)
+		goto fail;
+	data[0] = 0xc8; /* TX & RX enable, append status, no CRC */
+	data[1] = 0;
+	if (linkpart & (ADVERTISE_100FULL | ADVERTISE_10FULL))
+		data[1] |= 0x20;	/* set full duplex */
+	if (linkpart & (ADVERTISE_100FULL | ADVERTISE_100HALF))
+		data[1] |= 0x10;	/* set 100 Mbps */
+	if (mii_mode)
+		data[1] = 0;
+	data[2] = loopback ? 0x09 : 0x01;
+
+	memcpy(pegasus->eth_regs, data, sizeof(data));
+	ret = set_registers(pegasus, EthCtrl0, 3, data);
+
+	if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
+	    usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 ||
+	    usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
+		u16 auxmode;
+		ret = read_mii_word(pegasus, 0, 0x1b, &auxmode);
+		if (ret < 0)
+			goto fail;
+		auxmode |= 4;
+		write_mii_word(pegasus, 0, 0x1b, &auxmode);
+	}
+
+	return ret;
+fail:
+	netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+	return ret;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+	pegasus_t *pegasus = urb->context;
+	struct net_device *net;
+	u8 *buf = urb->transfer_buffer;
+	int rx_status, count = urb->actual_length;
+	int status = urb->status;
+	__u16 pkt_len;
+
+	if (!pegasus)
+		return;
+
+	net = pegasus->net;
+	if (!netif_device_present(net) || !netif_running(net))
+		return;
+
+	switch (status) {
+	case 0:
+		break;
+	case -ETIME:
+		netif_dbg(pegasus, rx_err, net, "reset MAC\n");
+		pegasus->flags &= ~PEGASUS_RX_BUSY;
+		break;
+	case -EPIPE:		/* stall, or disconnect from TT */
+		/* FIXME schedule work to clear the halt */
+		netif_warn(pegasus, rx_err, net, "no rx stall recovery\n");
+		return;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		netif_dbg(pegasus, ifdown, net, "rx unlink, %d\n", status);
+		return;
+	default:
+		netif_dbg(pegasus, rx_err, net, "RX status %d\n", status);
+		goto goon;
+	}
+
+	if (count < 4)
+		goto goon;
+
+	rx_status = buf[count - 2];
+	if (rx_status & 0x1c) {
+		netif_dbg(pegasus, rx_err, net,
+			  "RX packet error %x\n", rx_status);
+		net->stats.rx_errors++;
+		if (rx_status & 0x04)	/* runt	*/
+			net->stats.rx_length_errors++;
+		if (rx_status & 0x08)
+			net->stats.rx_crc_errors++;
+		if (rx_status & 0x10)	/* extra bits	*/
+			net->stats.rx_frame_errors++;
+		goto goon;
+	}
+	if (pegasus->chip == 0x8513) {
+		pkt_len = le32_to_cpu(*(__le32 *)urb->transfer_buffer);
+		pkt_len &= 0x0fff;
+		pegasus->rx_skb->data += 2;
+	} else {
+		pkt_len = buf[count - 3] << 8;
+		pkt_len += buf[count - 4];
+		pkt_len &= 0xfff;
+		pkt_len -= 4;
+	}
+
+	/*
+	 * If the packet is unreasonably long, quietly drop it rather than
+	 * kernel panicing by calling skb_put.
+	 */
+	if (pkt_len > PEGASUS_MTU)
+		goto goon;
+
+	/*
+	 * at this point we are sure pegasus->rx_skb != NULL
+	 * so we go ahead and pass up the packet.
+	 */
+	skb_put(pegasus->rx_skb, pkt_len);
+	pegasus->rx_skb->protocol = eth_type_trans(pegasus->rx_skb, net);
+	netif_rx(pegasus->rx_skb);
+	net->stats.rx_packets++;
+	net->stats.rx_bytes += pkt_len;
+
+	if (pegasus->flags & PEGASUS_UNPLUG)
+		return;
+
+	pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net, PEGASUS_MTU,
+						      GFP_ATOMIC);
+
+	if (pegasus->rx_skb == NULL)
+		goto tl_sched;
+goon:
+	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
+			  usb_rcvbulkpipe(pegasus->usb, 1),
+			  pegasus->rx_skb->data, PEGASUS_MTU,
+			  read_bulk_callback, pegasus);
+	rx_status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
+	if (rx_status == -ENODEV)
+		netif_device_detach(pegasus->net);
+	else if (rx_status) {
+		pegasus->flags |= PEGASUS_RX_URB_FAIL;
+		goto tl_sched;
+	} else {
+		pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
+	}
+
+	return;
+
+tl_sched:
+	tasklet_schedule(&pegasus->rx_tl);
+}
+
+static void rx_fixup(struct tasklet_struct *t)
+{
+	pegasus_t *pegasus = from_tasklet(pegasus, t, rx_tl);
+	int status;
+
+	if (pegasus->flags & PEGASUS_UNPLUG)
+		return;
+
+	if (pegasus->flags & PEGASUS_RX_URB_FAIL)
+		if (pegasus->rx_skb)
+			goto try_again;
+	if (pegasus->rx_skb == NULL)
+		pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net,
+							      PEGASUS_MTU,
+							      GFP_ATOMIC);
+	if (pegasus->rx_skb == NULL) {
+		netif_warn(pegasus, rx_err, pegasus->net, "low on memory\n");
+		tasklet_schedule(&pegasus->rx_tl);
+		return;
+	}
+	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
+			  usb_rcvbulkpipe(pegasus->usb, 1),
+			  pegasus->rx_skb->data, PEGASUS_MTU,
+			  read_bulk_callback, pegasus);
+try_again:
+	status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV)
+		netif_device_detach(pegasus->net);
+	else if (status) {
+		pegasus->flags |= PEGASUS_RX_URB_FAIL;
+		tasklet_schedule(&pegasus->rx_tl);
+	} else {
+		pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
+	}
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+	pegasus_t *pegasus = urb->context;
+	struct net_device *net;
+	int status = urb->status;
+
+	if (!pegasus)
+		return;
+
+	net = pegasus->net;
+
+	if (!netif_device_present(net) || !netif_running(net))
+		return;
+
+	switch (status) {
+	case -EPIPE:
+		/* FIXME schedule_work() to clear the tx halt */
+		netif_stop_queue(net);
+		netif_warn(pegasus, tx_err, net, "no tx stall recovery\n");
+		return;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		netif_dbg(pegasus, ifdown, net, "tx unlink, %d\n", status);
+		return;
+	default:
+		netif_info(pegasus, tx_err, net, "TX status %d\n", status);
+		fallthrough;
+	case 0:
+		break;
+	}
+
+	netif_trans_update(net); /* prevent tx timeout */
+	netif_wake_queue(net);
+}
+
+static void intr_callback(struct urb *urb)
+{
+	pegasus_t *pegasus = urb->context;
+	struct net_device *net;
+	int res, status = urb->status;
+
+	if (!pegasus)
+		return;
+	net = pegasus->net;
+
+	switch (status) {
+	case 0:
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	default:
+		/* some Pegasus-I products report LOTS of data
+		 * toggle errors... avoid log spamming
+		 */
+		netif_dbg(pegasus, timer, net, "intr status %d\n", status);
+	}
+
+	if (urb->actual_length >= 6) {
+		u8 *d = urb->transfer_buffer;
+
+		/* byte 0 == tx_status1, reg 2B */
+		if (d[0] & (TX_UNDERRUN|EXCESSIVE_COL
+					|LATE_COL|JABBER_TIMEOUT)) {
+			net->stats.tx_errors++;
+			if (d[0] & TX_UNDERRUN)
+				net->stats.tx_fifo_errors++;
+			if (d[0] & (EXCESSIVE_COL | JABBER_TIMEOUT))
+				net->stats.tx_aborted_errors++;
+			if (d[0] & LATE_COL)
+				net->stats.tx_window_errors++;
+		}
+
+		/* d[5].LINK_STATUS lies on some adapters.
+		 * d[0].NO_CARRIER kicks in only with failed TX.
+		 * ... so monitoring with MII may be safest.
+		 */
+
+		/* bytes 3-4 == rx_lostpkt, reg 2E/2F */
+		net->stats.rx_missed_errors += ((d[3] & 0x7f) << 8) | d[4];
+	}
+
+	res = usb_submit_urb(urb, GFP_ATOMIC);
+	if (res == -ENODEV)
+		netif_device_detach(pegasus->net);
+	if (res)
+		netif_err(pegasus, timer, net,
+			  "can't resubmit interrupt urb, %d\n", res);
+}
+
+static void pegasus_tx_timeout(struct net_device *net, unsigned int txqueue)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+	netif_warn(pegasus, timer, net, "tx timeout\n");
+	usb_unlink_urb(pegasus->tx_urb);
+	net->stats.tx_errors++;
+}
+
+static netdev_tx_t pegasus_start_xmit(struct sk_buff *skb,
+					    struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+	int count = ((skb->len + 2) & 0x3f) ? skb->len + 2 : skb->len + 3;
+	int res;
+	__u16 l16 = skb->len;
+
+	netif_stop_queue(net);
+
+	((__le16 *) pegasus->tx_buff)[0] = cpu_to_le16(l16);
+	skb_copy_from_linear_data(skb, pegasus->tx_buff + 2, skb->len);
+	usb_fill_bulk_urb(pegasus->tx_urb, pegasus->usb,
+			  usb_sndbulkpipe(pegasus->usb, 2),
+			  pegasus->tx_buff, count,
+			  write_bulk_callback, pegasus);
+	if ((res = usb_submit_urb(pegasus->tx_urb, GFP_ATOMIC))) {
+		netif_warn(pegasus, tx_err, net, "fail tx, %d\n", res);
+		switch (res) {
+		case -EPIPE:		/* stall, or disconnect from TT */
+			/* cleanup should already have been scheduled */
+			break;
+		case -ENODEV:		/* disconnect() upcoming */
+		case -EPERM:
+			netif_device_detach(pegasus->net);
+			break;
+		default:
+			net->stats.tx_errors++;
+			netif_start_queue(net);
+		}
+	} else {
+		net->stats.tx_packets++;
+		net->stats.tx_bytes += skb->len;
+	}
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+}
+
+static inline void disable_net_traffic(pegasus_t *pegasus)
+{
+	__le16 tmp = cpu_to_le16(0);
+
+	set_registers(pegasus, EthCtrl0, sizeof(tmp), &tmp);
+}
+
+static inline int get_interrupt_interval(pegasus_t *pegasus)
+{
+	u16 data;
+	u8 interval;
+	int ret;
+
+	ret = read_eprom_word(pegasus, 4, &data);
+	if (ret < 0)
+		return ret;
+
+	interval = data >> 8;
+	if (pegasus->usb->speed != USB_SPEED_HIGH) {
+		if (interval < 0x80) {
+			netif_info(pegasus, timer, pegasus->net,
+				   "intr interval changed from %ums to %ums\n",
+				   interval, 0x80);
+			interval = 0x80;
+			data = (data & 0x00FF) | ((u16)interval << 8);
+#ifdef PEGASUS_WRITE_EEPROM
+			write_eprom_word(pegasus, 4, data);
+#endif
+		}
+	}
+	pegasus->intr_interval = interval;
+
+	return 0;
+}
+
+static void set_carrier(struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+	u16 tmp;
+
+	if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
+		return;
+
+	if (tmp & BMSR_LSTATUS)
+		netif_carrier_on(net);
+	else
+		netif_carrier_off(net);
+}
+
+static void free_all_urbs(pegasus_t *pegasus)
+{
+	usb_free_urb(pegasus->intr_urb);
+	usb_free_urb(pegasus->tx_urb);
+	usb_free_urb(pegasus->rx_urb);
+}
+
+static void unlink_all_urbs(pegasus_t *pegasus)
+{
+	usb_kill_urb(pegasus->intr_urb);
+	usb_kill_urb(pegasus->tx_urb);
+	usb_kill_urb(pegasus->rx_urb);
+}
+
+static int alloc_urbs(pegasus_t *pegasus)
+{
+	int res = -ENOMEM;
+
+	pegasus->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pegasus->rx_urb) {
+		return res;
+	}
+	pegasus->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pegasus->tx_urb) {
+		usb_free_urb(pegasus->rx_urb);
+		return res;
+	}
+	pegasus->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!pegasus->intr_urb) {
+		usb_free_urb(pegasus->tx_urb);
+		usb_free_urb(pegasus->rx_urb);
+		return res;
+	}
+
+	return 0;
+}
+
+static int pegasus_open(struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+	int res=-ENOMEM;
+
+	if (pegasus->rx_skb == NULL)
+		pegasus->rx_skb = __netdev_alloc_skb_ip_align(pegasus->net,
+							      PEGASUS_MTU,
+							      GFP_KERNEL);
+	if (!pegasus->rx_skb)
+		goto exit;
+
+	set_registers(pegasus, EthID, 6, net->dev_addr);
+
+	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
+			  usb_rcvbulkpipe(pegasus->usb, 1),
+			  pegasus->rx_skb->data, PEGASUS_MTU,
+			  read_bulk_callback, pegasus);
+	if ((res = usb_submit_urb(pegasus->rx_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(pegasus->net);
+		netif_dbg(pegasus, ifup, net, "failed rx_urb, %d\n", res);
+		goto exit;
+	}
+
+	usb_fill_int_urb(pegasus->intr_urb, pegasus->usb,
+			 usb_rcvintpipe(pegasus->usb, 3),
+			 pegasus->intr_buff, sizeof(pegasus->intr_buff),
+			 intr_callback, pegasus, pegasus->intr_interval);
+	if ((res = usb_submit_urb(pegasus->intr_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(pegasus->net);
+		netif_dbg(pegasus, ifup, net, "failed intr_urb, %d\n", res);
+		usb_kill_urb(pegasus->rx_urb);
+		goto exit;
+	}
+	res = enable_net_traffic(net, pegasus->usb);
+	if (res < 0) {
+		netif_dbg(pegasus, ifup, net,
+			  "can't enable_net_traffic() - %d\n", res);
+		res = -EIO;
+		usb_kill_urb(pegasus->rx_urb);
+		usb_kill_urb(pegasus->intr_urb);
+		goto exit;
+	}
+	set_carrier(net);
+	netif_start_queue(net);
+	netif_dbg(pegasus, ifup, net, "open\n");
+	res = 0;
+exit:
+	return res;
+}
+
+static int pegasus_close(struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+
+	netif_stop_queue(net);
+	if (!(pegasus->flags & PEGASUS_UNPLUG))
+		disable_net_traffic(pegasus);
+	tasklet_kill(&pegasus->rx_tl);
+	unlink_all_urbs(pegasus);
+
+	return 0;
+}
+
+static void pegasus_get_drvinfo(struct net_device *dev,
+				struct ethtool_drvinfo *info)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+
+	strscpy(info->driver, driver_name, sizeof(info->driver));
+	usb_make_path(pegasus->usb, info->bus_info, sizeof(info->bus_info));
+}
+
+/* also handles three patterns of some kind in hardware */
+#define	WOL_SUPPORTED	(WAKE_MAGIC|WAKE_PHY)
+
+static void
+pegasus_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	pegasus_t	*pegasus = netdev_priv(dev);
+
+	wol->supported = WAKE_MAGIC | WAKE_PHY;
+	wol->wolopts = pegasus->wolopts;
+}
+
+static int
+pegasus_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	pegasus_t	*pegasus = netdev_priv(dev);
+	u8		reg78 = 0x04;
+	int		ret;
+
+	if (wol->wolopts & ~WOL_SUPPORTED)
+		return -EINVAL;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		reg78 |= 0x80;
+	if (wol->wolopts & WAKE_PHY)
+		reg78 |= 0x40;
+	/* FIXME this 0x10 bit still needs to get set in the chip... */
+	if (wol->wolopts)
+		pegasus->eth_regs[0] |= 0x10;
+	else
+		pegasus->eth_regs[0] &= ~0x10;
+	pegasus->wolopts = wol->wolopts;
+
+	ret = set_register(pegasus, WakeupControl, reg78);
+	if (!ret)
+		ret = device_set_wakeup_enable(&pegasus->usb->dev,
+						wol->wolopts);
+	return ret;
+}
+
+static inline void pegasus_reset_wol(struct net_device *dev)
+{
+	struct ethtool_wolinfo wol;
+
+	memset(&wol, 0, sizeof wol);
+	(void) pegasus_set_wol(dev, &wol);
+}
+
+static int
+pegasus_get_link_ksettings(struct net_device *dev,
+			   struct ethtool_link_ksettings *ecmd)
+{
+	pegasus_t *pegasus;
+
+	pegasus = netdev_priv(dev);
+	mii_ethtool_get_link_ksettings(&pegasus->mii, ecmd);
+	return 0;
+}
+
+static int
+pegasus_set_link_ksettings(struct net_device *dev,
+			   const struct ethtool_link_ksettings *ecmd)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	return mii_ethtool_set_link_ksettings(&pegasus->mii, ecmd);
+}
+
+static int pegasus_nway_reset(struct net_device *dev)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	return mii_nway_restart(&pegasus->mii);
+}
+
+static u32 pegasus_get_link(struct net_device *dev)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	return mii_link_ok(&pegasus->mii);
+}
+
+static u32 pegasus_get_msglevel(struct net_device *dev)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	return pegasus->msg_enable;
+}
+
+static void pegasus_set_msglevel(struct net_device *dev, u32 v)
+{
+	pegasus_t *pegasus = netdev_priv(dev);
+	pegasus->msg_enable = v;
+}
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = pegasus_get_drvinfo,
+	.nway_reset = pegasus_nway_reset,
+	.get_link = pegasus_get_link,
+	.get_msglevel = pegasus_get_msglevel,
+	.set_msglevel = pegasus_set_msglevel,
+	.get_wol = pegasus_get_wol,
+	.set_wol = pegasus_set_wol,
+	.get_link_ksettings = pegasus_get_link_ksettings,
+	.set_link_ksettings = pegasus_set_link_ksettings,
+};
+
+static int pegasus_siocdevprivate(struct net_device *net, struct ifreq *rq,
+				  void __user *udata, int cmd)
+{
+	__u16 *data = (__u16 *) &rq->ifr_ifru;
+	pegasus_t *pegasus = netdev_priv(net);
+	int res;
+
+	switch (cmd) {
+	case SIOCDEVPRIVATE:
+		data[0] = pegasus->phy;
+		fallthrough;
+	case SIOCDEVPRIVATE + 1:
+		res = read_mii_word(pegasus, data[0], data[1] & 0x1f, &data[3]);
+		break;
+	case SIOCDEVPRIVATE + 2:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		write_mii_word(pegasus, pegasus->phy, data[1] & 0x1f, &data[2]);
+		res = 0;
+		break;
+	default:
+		res = -EOPNOTSUPP;
+	}
+	return res;
+}
+
+static void pegasus_set_multicast(struct net_device *net)
+{
+	pegasus_t *pegasus = netdev_priv(net);
+
+	if (net->flags & IFF_PROMISC) {
+		pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
+		netif_info(pegasus, link, net, "Promiscuous mode enabled\n");
+	} else if (!netdev_mc_empty(net) || (net->flags & IFF_ALLMULTI)) {
+		pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
+		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
+		netif_dbg(pegasus, link, net, "set allmulti\n");
+	} else {
+		pegasus->eth_regs[EthCtrl0] &= ~RX_MULTICAST;
+		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
+	}
+	update_eth_regs_async(pegasus);
+}
+
+static __u8 mii_phy_probe(pegasus_t *pegasus)
+{
+	int i, ret;
+	__u16 tmp;
+
+	for (i = 0; i < 32; i++) {
+		ret = read_mii_word(pegasus, i, MII_BMSR, &tmp);
+		if (ret < 0)
+			goto fail;
+		if (tmp == 0 || tmp == 0xffff || (tmp & BMSR_MEDIA) == 0)
+			continue;
+		else
+			return i;
+	}
+fail:
+	return 0xff;
+}
+
+static inline void setup_pegasus_II(pegasus_t *pegasus)
+{
+	int ret;
+	__u8 data = 0xa5;
+
+	set_register(pegasus, Reg1d, 0);
+	set_register(pegasus, Reg7b, 1);
+	msleep(100);
+	if ((pegasus->features & HAS_HOME_PNA) && mii_mode)
+		set_register(pegasus, Reg7b, 0);
+	else
+		set_register(pegasus, Reg7b, 2);
+
+	set_register(pegasus, 0x83, data);
+	ret = get_registers(pegasus, 0x83, 1, &data);
+	if (ret < 0)
+		goto fail;
+
+	if (data == 0xa5)
+		pegasus->chip = 0x8513;
+	else
+		pegasus->chip = 0;
+
+	set_register(pegasus, 0x80, 0xc0);
+	set_register(pegasus, 0x83, 0xff);
+	set_register(pegasus, 0x84, 0x01);
+
+	if (pegasus->features & HAS_HOME_PNA && mii_mode)
+		set_register(pegasus, Reg81, 6);
+	else
+		set_register(pegasus, Reg81, 2);
+
+	return;
+fail:
+	netif_dbg(pegasus, drv, pegasus->net, "%s failed\n", __func__);
+}
+
+static void check_carrier(struct work_struct *work)
+{
+	pegasus_t *pegasus = container_of(work, pegasus_t, carrier_check.work);
+	set_carrier(pegasus->net);
+	if (!(pegasus->flags & PEGASUS_UNPLUG)) {
+		queue_delayed_work(system_long_wq, &pegasus->carrier_check,
+			CARRIER_CHECK_DELAY);
+	}
+}
+
+static int pegasus_blacklisted(struct usb_device *udev)
+{
+	struct usb_device_descriptor *udd = &udev->descriptor;
+
+	/* Special quirk to keep the driver from handling the Belkin Bluetooth
+	 * dongle which happens to have the same ID.
+	 */
+	if ((udd->idVendor == cpu_to_le16(VENDOR_BELKIN)) &&
+	    (udd->idProduct == cpu_to_le16(0x0121)) &&
+	    (udd->bDeviceClass == USB_CLASS_WIRELESS_CONTROLLER) &&
+	    (udd->bDeviceProtocol == 1))
+		return 1;
+
+	return 0;
+}
+
+static int pegasus_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct net_device *net;
+	pegasus_t *pegasus;
+	int dev_index = id - pegasus_ids;
+	int res = -ENOMEM;
+
+	if (pegasus_blacklisted(dev))
+		return -ENODEV;
+
+	net = alloc_etherdev(sizeof(struct pegasus));
+	if (!net)
+		goto out;
+
+	pegasus = netdev_priv(net);
+	pegasus->dev_index = dev_index;
+
+	res = alloc_urbs(pegasus);
+	if (res < 0) {
+		dev_err(&intf->dev, "can't allocate %s\n", "urbs");
+		goto out1;
+	}
+
+	tasklet_setup(&pegasus->rx_tl, rx_fixup);
+
+	INIT_DELAYED_WORK(&pegasus->carrier_check, check_carrier);
+
+	pegasus->intf = intf;
+	pegasus->usb = dev;
+	pegasus->net = net;
+
+
+	net->watchdog_timeo = PEGASUS_TX_TIMEOUT;
+	net->netdev_ops = &pegasus_netdev_ops;
+	net->ethtool_ops = &ops;
+	pegasus->mii.dev = net;
+	pegasus->mii.mdio_read = mdio_read;
+	pegasus->mii.mdio_write = mdio_write;
+	pegasus->mii.phy_id_mask = 0x1f;
+	pegasus->mii.reg_num_mask = 0x1f;
+	pegasus->msg_enable = netif_msg_init(msg_level, NETIF_MSG_DRV
+				| NETIF_MSG_PROBE | NETIF_MSG_LINK);
+
+	pegasus->features = usb_dev_id[dev_index].private;
+	res = get_interrupt_interval(pegasus);
+	if (res)
+		goto out2;
+	if (reset_mac(pegasus)) {
+		dev_err(&intf->dev, "can't reset MAC\n");
+		res = -EIO;
+		goto out2;
+	}
+	set_ethernet_addr(pegasus);
+	if (pegasus->features & PEGASUS_II) {
+		dev_info(&intf->dev, "setup Pegasus II specific registers\n");
+		setup_pegasus_II(pegasus);
+	}
+	pegasus->phy = mii_phy_probe(pegasus);
+	if (pegasus->phy == 0xff) {
+		dev_warn(&intf->dev, "can't locate MII phy, using default\n");
+		pegasus->phy = 1;
+	}
+	pegasus->mii.phy_id = pegasus->phy;
+	usb_set_intfdata(intf, pegasus);
+	SET_NETDEV_DEV(net, &intf->dev);
+	pegasus_reset_wol(net);
+	res = register_netdev(net);
+	if (res)
+		goto out3;
+	queue_delayed_work(system_long_wq, &pegasus->carrier_check,
+			   CARRIER_CHECK_DELAY);
+	dev_info(&intf->dev, "%s, %s, %pM\n", net->name,
+		 usb_dev_id[dev_index].name, net->dev_addr);
+	return 0;
+
+out3:
+	usb_set_intfdata(intf, NULL);
+out2:
+	free_all_urbs(pegasus);
+out1:
+	free_netdev(net);
+out:
+	return res;
+}
+
+static void pegasus_disconnect(struct usb_interface *intf)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (!pegasus) {
+		dev_dbg(&intf->dev, "unregistering non-bound device?\n");
+		return;
+	}
+
+	pegasus->flags |= PEGASUS_UNPLUG;
+	cancel_delayed_work_sync(&pegasus->carrier_check);
+	unregister_netdev(pegasus->net);
+	unlink_all_urbs(pegasus);
+	free_all_urbs(pegasus);
+	if (pegasus->rx_skb != NULL) {
+		dev_kfree_skb(pegasus->rx_skb);
+		pegasus->rx_skb = NULL;
+	}
+	free_netdev(pegasus->net);
+}
+
+static int pegasus_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	netif_device_detach(pegasus->net);
+	cancel_delayed_work_sync(&pegasus->carrier_check);
+	if (netif_running(pegasus->net)) {
+		usb_kill_urb(pegasus->rx_urb);
+		usb_kill_urb(pegasus->intr_urb);
+	}
+	return 0;
+}
+
+static int pegasus_resume(struct usb_interface *intf)
+{
+	struct pegasus *pegasus = usb_get_intfdata(intf);
+
+	netif_device_attach(pegasus->net);
+	if (netif_running(pegasus->net)) {
+		pegasus->rx_urb->status = 0;
+		pegasus->rx_urb->actual_length = 0;
+		read_bulk_callback(pegasus->rx_urb);
+
+		pegasus->intr_urb->status = 0;
+		pegasus->intr_urb->actual_length = 0;
+		intr_callback(pegasus->intr_urb);
+	}
+	queue_delayed_work(system_long_wq, &pegasus->carrier_check,
+				CARRIER_CHECK_DELAY);
+	return 0;
+}
+
+static const struct net_device_ops pegasus_netdev_ops = {
+	.ndo_open =			pegasus_open,
+	.ndo_stop =			pegasus_close,
+	.ndo_siocdevprivate =		pegasus_siocdevprivate,
+	.ndo_start_xmit =		pegasus_start_xmit,
+	.ndo_set_rx_mode =		pegasus_set_multicast,
+	.ndo_tx_timeout =		pegasus_tx_timeout,
+	.ndo_set_mac_address =		eth_mac_addr,
+	.ndo_validate_addr =		eth_validate_addr,
+};
+
+static struct usb_driver pegasus_driver = {
+	.name = driver_name,
+	.probe = pegasus_probe,
+	.disconnect = pegasus_disconnect,
+	.id_table = pegasus_ids,
+	.suspend = pegasus_suspend,
+	.resume = pegasus_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+static void __init parse_id(char *id)
+{
+	unsigned int vendor_id = 0, device_id = 0, flags = 0, i = 0;
+	char *token, *name = NULL;
+
+	if ((token = strsep(&id, ":")) != NULL)
+		name = token;
+	/* name now points to a null terminated string*/
+	if ((token = strsep(&id, ":")) != NULL)
+		vendor_id = simple_strtoul(token, NULL, 16);
+	if ((token = strsep(&id, ":")) != NULL)
+		device_id = simple_strtoul(token, NULL, 16);
+	flags = simple_strtoul(id, NULL, 16);
+	pr_info("%s: new device %s, vendor ID 0x%04x, device ID 0x%04x, flags: 0x%x\n",
+		driver_name, name, vendor_id, device_id, flags);
+
+	if (vendor_id > 0x10000 || vendor_id == 0)
+		return;
+	if (device_id > 0x10000 || device_id == 0)
+		return;
+
+	for (i = 0; usb_dev_id[i].name; i++);
+	usb_dev_id[i].name = name;
+	usb_dev_id[i].vendor = vendor_id;
+	usb_dev_id[i].device = device_id;
+	usb_dev_id[i].private = flags;
+	pegasus_ids[i].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+	pegasus_ids[i].idVendor = vendor_id;
+	pegasus_ids[i].idProduct = device_id;
+}
+
+static int __init pegasus_init(void)
+{
+	pr_info("%s: " DRIVER_DESC "\n", driver_name);
+	if (devid)
+		parse_id(devid);
+	return usb_register(&pegasus_driver);
+}
+
+static void __exit pegasus_exit(void)
+{
+	usb_deregister(&pegasus_driver);
+}
+
+module_init(pegasus_init);
+module_exit(pegasus_exit);
diff --git a/drivers/net/usb/pegasus.h b/drivers/net/usb/pegasus.h
new file mode 100644
index 000000000..a05b14315
--- /dev/null
+++ b/drivers/net/usb/pegasus.h
@@ -0,0 +1,304 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 1999-2013 Petko Manolov (petkan@nucleusys.com)
+ */
+
+
+#ifndef	PEGASUS_DEV
+
+#define	PEGASUS_II		0x80000000
+#define	HAS_HOME_PNA		0x40000000
+
+#define	PEGASUS_MTU		1536
+
+#define	EPROM_WRITE		0x01
+#define	EPROM_READ		0x02
+#define	EPROM_DONE		0x04
+#define	EPROM_WR_ENABLE		0x10
+#define	EPROM_LOAD		0x20
+
+#define	PHY_DONE		0x80
+#define	PHY_READ		0x40
+#define	PHY_WRITE		0x20
+#define	DEFAULT_GPIO_RESET	0x24
+#define	DEFAULT_GPIO_SET	0x26
+
+#define	PEGASUS_PRESENT		0x00000001
+#define	PEGASUS_TX_BUSY		0x00000004
+#define	PEGASUS_RX_BUSY		0x00000008
+#define	CTRL_URB_RUNNING	0x00000010
+#define	CTRL_URB_SLEEP		0x00000020
+#define	PEGASUS_UNPLUG		0x00000040
+#define	PEGASUS_RX_URB_FAIL	0x00000080
+
+#define	RX_MULTICAST		2
+#define	RX_PROMISCUOUS		4
+
+#define	REG_TIMEOUT		(HZ)
+#define	PEGASUS_TX_TIMEOUT	(HZ*10)
+
+#define	TX_UNDERRUN		0x80
+#define	EXCESSIVE_COL		0x40
+#define	LATE_COL		0x20
+#define	NO_CARRIER		0x10
+#define	LOSS_CARRIER		0x08
+#define	JABBER_TIMEOUT		0x04
+
+#define	LINK_STATUS		0x01
+
+#define	PEGASUS_REQT_READ	0xc0
+#define	PEGASUS_REQT_WRITE	0x40
+#define	PEGASUS_REQ_GET_REGS	0xf0
+#define	PEGASUS_REQ_SET_REGS	0xf1
+#define	PEGASUS_REQ_SET_REG	PEGASUS_REQ_SET_REGS
+
+enum pegasus_registers {
+	EthCtrl0 = 0,
+	EthCtrl1 = 1,
+	EthCtrl2 = 2,
+	EthID = 0x10,
+	Reg1d = 0x1d,
+	EpromOffset = 0x20,
+	EpromData = 0x21,	/* 0x21 low, 0x22 high byte */
+	EpromCtrl = 0x23,
+	PhyAddr = 0x25,
+	PhyData = 0x26,		/* 0x26 low, 0x27 high byte */
+	PhyCtrl = 0x28,
+	UsbStst = 0x2a,
+	EthTxStat0 = 0x2b,
+	EthTxStat1 = 0x2c,
+	EthRxStat = 0x2d,
+	WakeupControl = 0x78,
+	Reg7b = 0x7b,
+	Gpio0 = 0x7e,
+	Gpio1 = 0x7f,
+	Reg81 = 0x81,
+};
+
+
+typedef struct pegasus {
+	struct usb_device	*usb;
+	struct usb_interface	*intf;
+	struct net_device	*net;
+	struct mii_if_info	mii;
+	unsigned		flags;
+	unsigned		features;
+	u32			msg_enable;
+	u32			wolopts;
+	int			dev_index;
+	int			intr_interval;
+	struct tasklet_struct	rx_tl;
+	struct delayed_work	carrier_check;
+	struct urb		*rx_urb, *tx_urb, *intr_urb;
+	struct sk_buff		*rx_skb;
+	int			chip;
+	unsigned char		intr_buff[8];
+	__u8			tx_buff[PEGASUS_MTU];
+	__u8			eth_regs[4];
+	__u8			phy;
+	__u8			gpio_res;
+} pegasus_t;
+
+
+struct usb_eth_dev {
+	char	*name;
+	__u16	vendor;
+	__u16	device;
+	__u32	private; /* LSB is gpio reset value */
+};
+
+#define	VENDOR_3COM		0x0506
+#define	VENDOR_ABOCOM		0x07b8
+#define	VENDOR_ACCTON		0x083a
+#define	VENDOR_ADMTEK		0x07a6
+#define	VENDOR_AEILAB		0x3334
+#define	VENDOR_ALLIEDTEL	0x07c9
+#define	VENDOR_ATEN		0x0557
+#define	VENDOR_BELKIN		0x050d
+#define	VENDOR_BILLIONTON	0x08dd
+#define	VENDOR_COMPAQ		0x049f
+#define	VENDOR_COREGA		0x07aa
+#define	VENDOR_DLINK		0x2001
+#define	VENDOR_ELCON		0x0db7
+#define	VENDOR_ELECOM		0x056e
+#define	VENDOR_ELSA		0x05cc
+#define	VENDOR_GIGABYTE		0x1044
+#define	VENDOR_HAWKING		0x0e66
+#define	VENDOR_HP		0x03f0
+#define	VENDOR_IODATA		0x04bb
+#define	VENDOR_KINGSTON		0x0951
+#define	VENDOR_LANEED		0x056e
+#define	VENDOR_LINKSYS		0x066b
+#define	VENDOR_LINKSYS2		0x077b
+#define	VENDOR_MELCO		0x0411
+#define	VENDOR_MICROSOFT	0x045e
+#define	VENDOR_MOBILITY		0x1342
+#define	VENDOR_NETGEAR		0x0846
+#define	VENDOR_OCT		0x0b39
+#define	VENDOR_SMARTBRIDGES	0x08d1
+#define	VENDOR_SMC		0x0707
+#define	VENDOR_SOHOWARE		0x15e8
+#define	VENDOR_SIEMENS		0x067c
+
+
+#else	/* PEGASUS_DEV */
+
+PEGASUS_DEV("3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
+		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
+PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Philips USB 10/100 Ethernet", VENDOR_ACCTON, 0xb004,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
+		VENDOR_ADMTEK, 0x8511,
+		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
+PEGASUS_DEV("ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
+		VENDOR_ADMTEK, 0x8513,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
+		VENDOR_ADMTEK, 0x8515,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
+		VENDOR_ADMTEK, 0x0986,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("AN986A USB MAC", VENDOR_ADMTEK, 1986,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+/*
+ * Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors
+ * with the same product IDs by checking the device class too.
+ */
+PEGASUS_DEV_CLASS("Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Belkin F5U122 10/100 USB Ethernet", VENDOR_BELKIN, 0x0122,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("D-Link DSB-650", VENDOR_DLINK, 0xabc1,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
+		DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA)
+PEGASUS_DEV("ELECOM USB Ethernet LD-USB20", VENDOR_ELECOM,  0x4010,
+		DEFAULT_GPIO_RESET  | PEGASUS_II)
+PEGASUS_DEV("EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("IO DATA USB ETX-US2", VENDOR_IODATA, 0x093a,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("LANEED USB Ethernet LD-USBL/TX", VENDOR_LANEED, 0x4005,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
+		DEFAULT_GPIO_RESET | HAS_HOME_PNA)
+PEGASUS_DEV("Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("OCT Inc.", VENDOR_OCT, 0x0109,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
+		DEFAULT_GPIO_RESET)
+PEGASUS_DEV("SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV("SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
+		DEFAULT_GPIO_RESET | PEGASUS_II)
+
+
+#endif	/* PEGASUS_DEV */
diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c
new file mode 100644
index 000000000..7a2b0094d
--- /dev/null
+++ b/drivers/net/usb/plusb.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PL-2301/2302 USB host-to-host link cables
+ * Copyright (C) 2000-2005 by David Brownell
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/
+ *
+ * The protocol and handshaking used here should be bug-compatible
+ * with the Linux 2.2 "plusb" driver, by Deti Fliegl.
+ *
+ * HEADS UP:  this handshaking isn't all that robust.  This driver
+ * gets confused easily if you unplug one end of the cable then
+ * try to connect it again; you'll need to restart both ends. The
+ * "naplink" software (used by some PlayStation/2 developers) does
+ * the handshaking much better!   Also, sometimes this hardware
+ * seems to get wedged under load.  Prolific docs are weak, and
+ * don't identify differences between PL2301 and PL2302, much less
+ * anything to explain the different PL2302 versions observed.
+ *
+ * NOTE:  pl2501 has several modes, including pl2301 and pl2302
+ * compatibility.   Some docs suggest the difference between 2301
+ * and 2302 is only to make MS-Windows use a different driver...
+ *
+ * pl25a1 glue based on patch from Tony Gibbs.  Prolific "docs" on
+ * this chip are as usual incomplete about what control messages
+ * are supported.
+ */
+
+/*
+ * Bits 0-4 can be used for software handshaking; they're set from
+ * one end, cleared from the other, "read" with the interrupt byte.
+ */
+#define	PL_S_EN		(1<<7)		/* (feature only) suspend enable */
+/* reserved bit -- rx ready (6) ? */
+#define	PL_TX_READY	(1<<5)		/* (interrupt only) transmit ready */
+#define	PL_RESET_OUT	(1<<4)		/* reset output pipe */
+#define	PL_RESET_IN	(1<<3)		/* reset input pipe */
+#define	PL_TX_C		(1<<2)		/* transmission complete */
+#define	PL_TX_REQ	(1<<1)		/* transmission received */
+#define	PL_PEER_E	(1<<0)		/* peer exists */
+
+static inline int
+pl_vendor_req(struct usbnet *dev, u8 req, u8 val, u8 index)
+{
+	return usbnet_write_cmd(dev, req, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				val, index, NULL, 0);
+}
+
+static inline int
+pl_clear_QuickLink_features(struct usbnet *dev, int val)
+{
+	return pl_vendor_req(dev, 1, (u8) val, 0);
+}
+
+static inline int
+pl_set_QuickLink_features(struct usbnet *dev, int val)
+{
+	return pl_vendor_req(dev, 3, (u8) val, 0);
+}
+
+static int pl_reset(struct usbnet *dev)
+{
+	int status;
+
+	/* some units seem to need this reset, others reject it utterly.
+	 * FIXME be more like "naplink" or windows drivers.
+	 */
+	status = pl_set_QuickLink_features(dev,
+		PL_S_EN|PL_RESET_OUT|PL_RESET_IN|PL_PEER_E);
+	if (status != 0 && netif_msg_probe(dev))
+		netif_dbg(dev, link, dev->net, "pl_reset --> %d\n", status);
+	return 0;
+}
+
+static const struct driver_info	prolific_info = {
+	.description =	"Prolific PL-2301/PL-2302/PL-25A1/PL-27A1",
+	.flags =	FLAG_POINTTOPOINT | FLAG_NO_SETINT,
+		/* some PL-2302 versions seem to fail usb_set_interface() */
+	.reset =	pl_reset,
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Proilific's name won't normally be on the cables, and
+ * may not be on the device.
+ */
+
+static const struct usb_device_id	products [] = {
+
+/* full speed cables */
+{
+	USB_DEVICE(0x067b, 0x0000),	// PL-2301
+	.driver_info =	(unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x067b, 0x0001),	// PL-2302
+	.driver_info =	(unsigned long) &prolific_info,
+},
+
+/* high speed cables */
+{
+	USB_DEVICE(0x067b, 0x25a1),     /* PL-25A1, no eeprom */
+	.driver_info =  (unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x050d, 0x258a),     /* Belkin F5U258/F5U279 (PL-25A1) */
+	.driver_info =  (unsigned long) &prolific_info,
+}, {
+	USB_DEVICE(0x3923, 0x7825),     /* National Instruments USB
+					 * Host-to-Host Cable
+					 */
+	.driver_info =  (unsigned long) &prolific_info,
+
+},
+
+/* super speed cables */
+{
+	USB_DEVICE(0x067b, 0x27a1),     /* PL-27A1, no eeprom
+					 * also: goobay Active USB 3.0
+					 * Data Link,
+					 * Unitek Y-3501
+					 */
+	.driver_info =  (unsigned long) &prolific_info,
+},
+
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver plusb_driver = {
+	.name =		"plusb",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(plusb_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("Prolific PL-2301/2302/25A1/27A1 USB Host to Host Link Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
new file mode 100644
index 000000000..2d82481d3
--- /dev/null
+++ b/drivers/net/usb/qmi_wwan.c
@@ -0,0 +1,1597 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
+ *
+ * The probing code is heavily inspired by cdc_ether, which is:
+ * Copyright (C) 2003-2005 by David Brownell
+ * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
+ */
+
+#include <linux/module.h>
+#include <linux/sched/signal.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+#include <linux/mii.h>
+#include <linux/rtnetlink.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc-wdm.h>
+#include <linux/u64_stats_sync.h>
+
+/* This driver supports wwan (3G/LTE/?) devices using a vendor
+ * specific management protocol called Qualcomm MSM Interface (QMI) -
+ * in addition to the more common AT commands over serial interface
+ * management
+ *
+ * QMI is wrapped in CDC, using CDC encapsulated commands on the
+ * control ("master") interface of a two-interface CDC Union
+ * resembling standard CDC ECM.  The devices do not use the control
+ * interface for any other CDC messages.  Most likely because the
+ * management protocol is used in place of the standard CDC
+ * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
+ *
+ * Alternatively, control and data functions can be combined in a
+ * single USB interface.
+ *
+ * Handling a protocol like QMI is out of the scope for any driver.
+ * It is exported as a character device using the cdc-wdm driver as
+ * a subdriver, enabling userspace applications ("modem managers") to
+ * handle it.
+ *
+ * These devices may alternatively/additionally be configured using AT
+ * commands on a serial interface
+ */
+
+/* driver specific data */
+struct qmi_wwan_state {
+	struct usb_driver *subdriver;
+	atomic_t pmcount;
+	unsigned long flags;
+	struct usb_interface *control;
+	struct usb_interface *data;
+};
+
+enum qmi_wwan_flags {
+	QMI_WWAN_FLAG_RAWIP = 1 << 0,
+	QMI_WWAN_FLAG_MUX = 1 << 1,
+	QMI_WWAN_FLAG_PASS_THROUGH = 1 << 2,
+};
+
+enum qmi_wwan_quirks {
+	QMI_WWAN_QUIRK_DTR = 1 << 0,	/* needs "set DTR" request */
+};
+
+struct qmimux_hdr {
+	u8 pad;
+	u8 mux_id;
+	__be16 pkt_len;
+};
+
+struct qmimux_priv {
+	struct net_device *real_dev;
+	u8 mux_id;
+};
+
+static int qmimux_open(struct net_device *dev)
+{
+	struct qmimux_priv *priv = netdev_priv(dev);
+	struct net_device *real_dev = priv->real_dev;
+
+	if (!(priv->real_dev->flags & IFF_UP))
+		return -ENETDOWN;
+
+	if (netif_carrier_ok(real_dev))
+		netif_carrier_on(dev);
+	return 0;
+}
+
+static int qmimux_stop(struct net_device *dev)
+{
+	netif_carrier_off(dev);
+	return 0;
+}
+
+static netdev_tx_t qmimux_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct qmimux_priv *priv = netdev_priv(dev);
+	unsigned int len = skb->len;
+	struct qmimux_hdr *hdr;
+	netdev_tx_t ret;
+
+	hdr = skb_push(skb, sizeof(struct qmimux_hdr));
+	hdr->pad = 0;
+	hdr->mux_id = priv->mux_id;
+	hdr->pkt_len = cpu_to_be16(len);
+	skb->dev = priv->real_dev;
+	ret = dev_queue_xmit(skb);
+
+	if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN))
+		dev_sw_netstats_tx_add(dev, 1, len);
+	else
+		dev->stats.tx_dropped++;
+
+	return ret;
+}
+
+static const struct net_device_ops qmimux_netdev_ops = {
+	.ndo_open        = qmimux_open,
+	.ndo_stop        = qmimux_stop,
+	.ndo_start_xmit  = qmimux_start_xmit,
+	.ndo_get_stats64 = dev_get_tstats64,
+};
+
+static void qmimux_setup(struct net_device *dev)
+{
+	dev->header_ops      = NULL;  /* No header */
+	dev->type            = ARPHRD_NONE;
+	dev->hard_header_len = 0;
+	dev->addr_len        = 0;
+	dev->flags           = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
+	dev->netdev_ops      = &qmimux_netdev_ops;
+	dev->mtu             = 1500;
+	dev->needs_free_netdev = true;
+}
+
+static struct net_device *qmimux_find_dev(struct usbnet *dev, u8 mux_id)
+{
+	struct qmimux_priv *priv;
+	struct list_head *iter;
+	struct net_device *ldev;
+
+	rcu_read_lock();
+	netdev_for_each_upper_dev_rcu(dev->net, ldev, iter) {
+		priv = netdev_priv(ldev);
+		if (priv->mux_id == mux_id) {
+			rcu_read_unlock();
+			return ldev;
+		}
+	}
+	rcu_read_unlock();
+	return NULL;
+}
+
+static bool qmimux_has_slaves(struct usbnet *dev)
+{
+	return !list_empty(&dev->net->adj_list.upper);
+}
+
+static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	unsigned int len, offset = 0, pad_len, pkt_len;
+	struct qmimux_hdr *hdr;
+	struct net_device *net;
+	struct sk_buff *skbn;
+	u8 qmimux_hdr_sz = sizeof(*hdr);
+
+	while (offset + qmimux_hdr_sz < skb->len) {
+		hdr = (struct qmimux_hdr *)(skb->data + offset);
+		len = be16_to_cpu(hdr->pkt_len);
+
+		/* drop the packet, bogus length */
+		if (offset + len + qmimux_hdr_sz > skb->len)
+			return 0;
+
+		/* control packet, we do not know what to do */
+		if (hdr->pad & 0x80)
+			goto skip;
+
+		/* extract padding length and check for valid length info */
+		pad_len = hdr->pad & 0x3f;
+		if (len == 0 || pad_len >= len)
+			goto skip;
+		pkt_len = len - pad_len;
+
+		net = qmimux_find_dev(dev, hdr->mux_id);
+		if (!net)
+			goto skip;
+		skbn = netdev_alloc_skb(net, pkt_len + LL_MAX_HEADER);
+		if (!skbn)
+			return 0;
+
+		switch (skb->data[offset + qmimux_hdr_sz] & 0xf0) {
+		case 0x40:
+			skbn->protocol = htons(ETH_P_IP);
+			break;
+		case 0x60:
+			skbn->protocol = htons(ETH_P_IPV6);
+			break;
+		default:
+			/* not ip - do not know what to do */
+			goto skip;
+		}
+
+		skb_reserve(skbn, LL_MAX_HEADER);
+		skb_put_data(skbn, skb->data + offset + qmimux_hdr_sz, pkt_len);
+		if (netif_rx(skbn) != NET_RX_SUCCESS) {
+			net->stats.rx_errors++;
+			return 0;
+		} else {
+			dev_sw_netstats_rx_add(net, pkt_len);
+		}
+
+skip:
+		offset += len + qmimux_hdr_sz;
+	}
+	return 1;
+}
+
+static ssize_t mux_id_show(struct device *d, struct device_attribute *attr, char *buf)
+{
+	struct net_device *dev = to_net_dev(d);
+	struct qmimux_priv *priv;
+
+	priv = netdev_priv(dev);
+
+	return sysfs_emit(buf, "0x%02x\n", priv->mux_id);
+}
+
+static DEVICE_ATTR_RO(mux_id);
+
+static struct attribute *qmi_wwan_sysfs_qmimux_attrs[] = {
+	&dev_attr_mux_id.attr,
+	NULL,
+};
+
+static struct attribute_group qmi_wwan_sysfs_qmimux_attr_group = {
+	.name = "qmap",
+	.attrs = qmi_wwan_sysfs_qmimux_attrs,
+};
+
+static int qmimux_register_device(struct net_device *real_dev, u8 mux_id)
+{
+	struct net_device *new_dev;
+	struct qmimux_priv *priv;
+	int err;
+
+	new_dev = alloc_netdev(sizeof(struct qmimux_priv),
+			       "qmimux%d", NET_NAME_UNKNOWN, qmimux_setup);
+	if (!new_dev)
+		return -ENOBUFS;
+
+	dev_net_set(new_dev, dev_net(real_dev));
+	priv = netdev_priv(new_dev);
+	priv->mux_id = mux_id;
+	priv->real_dev = real_dev;
+
+	new_dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
+	if (!new_dev->tstats) {
+		err = -ENOBUFS;
+		goto out_free_newdev;
+	}
+
+	new_dev->sysfs_groups[0] = &qmi_wwan_sysfs_qmimux_attr_group;
+
+	err = register_netdevice(new_dev);
+	if (err < 0)
+		goto out_free_newdev;
+
+	/* Account for reference in struct qmimux_priv_priv */
+	dev_hold(real_dev);
+
+	err = netdev_upper_dev_link(real_dev, new_dev, NULL);
+	if (err)
+		goto out_unregister_netdev;
+
+	netif_stacked_transfer_operstate(real_dev, new_dev);
+
+	return 0;
+
+out_unregister_netdev:
+	unregister_netdevice(new_dev);
+	dev_put(real_dev);
+
+out_free_newdev:
+	free_netdev(new_dev);
+	return err;
+}
+
+static void qmimux_unregister_device(struct net_device *dev,
+				     struct list_head *head)
+{
+	struct qmimux_priv *priv = netdev_priv(dev);
+	struct net_device *real_dev = priv->real_dev;
+
+	free_percpu(dev->tstats);
+	netdev_upper_dev_unlink(real_dev, dev);
+	unregister_netdevice_queue(dev, head);
+
+	/* Get rid of the reference to real_dev */
+	dev_put(real_dev);
+}
+
+static void qmi_wwan_netdev_setup(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct qmi_wwan_state *info = (void *)&dev->data;
+
+	if (info->flags & QMI_WWAN_FLAG_RAWIP) {
+		net->header_ops      = NULL;  /* No header */
+		net->type            = ARPHRD_NONE;
+		net->hard_header_len = 0;
+		net->addr_len        = 0;
+		net->flags           = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
+		set_bit(EVENT_NO_IP_ALIGN, &dev->flags);
+		netdev_dbg(net, "mode: raw IP\n");
+	} else if (!net->header_ops) { /* don't bother if already set */
+		ether_setup(net);
+		/* Restoring min/max mtu values set originally by usbnet */
+		net->min_mtu = 0;
+		net->max_mtu = ETH_MAX_MTU;
+		clear_bit(EVENT_NO_IP_ALIGN, &dev->flags);
+		netdev_dbg(net, "mode: Ethernet\n");
+	}
+
+	/* recalculate buffers after changing hard_header_len */
+	usbnet_change_mtu(net, net->mtu);
+}
+
+static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char *buf)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct qmi_wwan_state *info = (void *)&dev->data;
+
+	return sprintf(buf, "%c\n", info->flags & QMI_WWAN_FLAG_RAWIP ? 'Y' : 'N');
+}
+
+static ssize_t raw_ip_store(struct device *d,  struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	bool enable;
+	int ret;
+
+	if (strtobool(buf, &enable))
+		return -EINVAL;
+
+	/* no change? */
+	if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP))
+		return len;
+
+	/* ip mode cannot be cleared when pass through mode is set */
+	if (!enable && (info->flags & QMI_WWAN_FLAG_PASS_THROUGH)) {
+		netdev_err(dev->net,
+			   "Cannot clear ip mode on pass through device\n");
+		return -EINVAL;
+	}
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	/* we don't want to modify a running netdev */
+	if (netif_running(dev->net)) {
+		netdev_err(dev->net, "Cannot change a running device\n");
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* let other drivers deny the change */
+	ret = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, dev->net);
+	ret = notifier_to_errno(ret);
+	if (ret) {
+		netdev_err(dev->net, "Type change was refused\n");
+		goto err;
+	}
+
+	if (enable)
+		info->flags |= QMI_WWAN_FLAG_RAWIP;
+	else
+		info->flags &= ~QMI_WWAN_FLAG_RAWIP;
+	qmi_wwan_netdev_setup(dev->net);
+	call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev->net);
+	ret = len;
+err:
+	rtnl_unlock();
+	return ret;
+}
+
+static ssize_t add_mux_show(struct device *d, struct device_attribute *attr, char *buf)
+{
+	struct net_device *dev = to_net_dev(d);
+	struct qmimux_priv *priv;
+	struct list_head *iter;
+	struct net_device *ldev;
+	ssize_t count = 0;
+
+	rcu_read_lock();
+	netdev_for_each_upper_dev_rcu(dev, ldev, iter) {
+		priv = netdev_priv(ldev);
+		count += scnprintf(&buf[count], PAGE_SIZE - count,
+				   "0x%02x\n", priv->mux_id);
+	}
+	rcu_read_unlock();
+	return count;
+}
+
+static ssize_t add_mux_store(struct device *d,  struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	u8 mux_id;
+	int ret;
+
+	if (kstrtou8(buf, 0, &mux_id))
+		return -EINVAL;
+
+	/* mux_id [1 - 254] for compatibility with ip(8) and the rmnet driver */
+	if (mux_id < 1 || mux_id > 254)
+		return -EINVAL;
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	if (qmimux_find_dev(dev, mux_id)) {
+		netdev_err(dev->net, "mux_id already present\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	ret = qmimux_register_device(dev->net, mux_id);
+	if (!ret) {
+		info->flags |= QMI_WWAN_FLAG_MUX;
+		ret = len;
+	}
+err:
+	rtnl_unlock();
+	return ret;
+}
+
+static ssize_t del_mux_show(struct device *d, struct device_attribute *attr, char *buf)
+{
+	return add_mux_show(d, attr, buf);
+}
+
+static ssize_t del_mux_store(struct device *d,  struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	struct net_device *del_dev;
+	u8 mux_id;
+	int ret = 0;
+
+	if (kstrtou8(buf, 0, &mux_id))
+		return -EINVAL;
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	del_dev = qmimux_find_dev(dev, mux_id);
+	if (!del_dev) {
+		netdev_err(dev->net, "mux_id not present\n");
+		ret = -EINVAL;
+		goto err;
+	}
+	qmimux_unregister_device(del_dev, NULL);
+
+	if (!qmimux_has_slaves(dev))
+		info->flags &= ~QMI_WWAN_FLAG_MUX;
+	ret = len;
+err:
+	rtnl_unlock();
+	return ret;
+}
+
+static ssize_t pass_through_show(struct device *d,
+				 struct device_attribute *attr, char *buf)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct qmi_wwan_state *info;
+
+	info = (void *)&dev->data;
+	return sprintf(buf, "%c\n",
+		       info->flags & QMI_WWAN_FLAG_PASS_THROUGH ? 'Y' : 'N');
+}
+
+static ssize_t pass_through_store(struct device *d,
+				  struct device_attribute *attr,
+				  const char *buf, size_t len)
+{
+	struct usbnet *dev = netdev_priv(to_net_dev(d));
+	struct qmi_wwan_state *info;
+	bool enable;
+
+	if (strtobool(buf, &enable))
+		return -EINVAL;
+
+	info = (void *)&dev->data;
+
+	/* no change? */
+	if (enable == (info->flags & QMI_WWAN_FLAG_PASS_THROUGH))
+		return len;
+
+	/* pass through mode can be set for raw ip devices only */
+	if (!(info->flags & QMI_WWAN_FLAG_RAWIP)) {
+		netdev_err(dev->net,
+			   "Cannot set pass through mode on non ip device\n");
+		return -EINVAL;
+	}
+
+	if (enable)
+		info->flags |= QMI_WWAN_FLAG_PASS_THROUGH;
+	else
+		info->flags &= ~QMI_WWAN_FLAG_PASS_THROUGH;
+
+	return len;
+}
+
+static DEVICE_ATTR_RW(raw_ip);
+static DEVICE_ATTR_RW(add_mux);
+static DEVICE_ATTR_RW(del_mux);
+static DEVICE_ATTR_RW(pass_through);
+
+static struct attribute *qmi_wwan_sysfs_attrs[] = {
+	&dev_attr_raw_ip.attr,
+	&dev_attr_add_mux.attr,
+	&dev_attr_del_mux.attr,
+	&dev_attr_pass_through.attr,
+	NULL,
+};
+
+static struct attribute_group qmi_wwan_sysfs_attr_group = {
+	.name = "qmi",
+	.attrs = qmi_wwan_sysfs_attrs,
+};
+
+/* default ethernet address used by the modem */
+static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
+
+static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
+
+/* Make up an ethernet header if the packet doesn't have one.
+ *
+ * A firmware bug common among several devices cause them to send raw
+ * IP packets under some circumstances.  There is no way for the
+ * driver/host to know when this will happen.  And even when the bug
+ * hits, some packets will still arrive with an intact header.
+ *
+ * The supported devices are only capably of sending IPv4, IPv6 and
+ * ARP packets on a point-to-point link. Any packet with an ethernet
+ * header will have either our address or a broadcast/multicast
+ * address as destination.  ARP packets will always have a header.
+ *
+ * This means that this function will reliably add the appropriate
+ * header iff necessary, provided our hardware address does not start
+ * with 4 or 6.
+ *
+ * Another common firmware bug results in all packets being addressed
+ * to 00:a0:c6:00:00:00 despite the host address being different.
+ * This function will also fixup such packets.
+ */
+static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	bool rawip = info->flags & QMI_WWAN_FLAG_RAWIP;
+	__be16 proto;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	if (info->flags & QMI_WWAN_FLAG_MUX)
+		return qmimux_rx_fixup(dev, skb);
+
+	if (info->flags & QMI_WWAN_FLAG_PASS_THROUGH) {
+		skb->protocol = htons(ETH_P_MAP);
+		return 1;
+	}
+
+	switch (skb->data[0] & 0xf0) {
+	case 0x40:
+		proto = htons(ETH_P_IP);
+		break;
+	case 0x60:
+		proto = htons(ETH_P_IPV6);
+		break;
+	case 0x00:
+		if (rawip)
+			return 0;
+		if (is_multicast_ether_addr(skb->data))
+			return 1;
+		/* possibly bogus destination - rewrite just in case */
+		skb_reset_mac_header(skb);
+		goto fix_dest;
+	default:
+		if (rawip)
+			return 0;
+		/* pass along other packets without modifications */
+		return 1;
+	}
+	if (rawip) {
+		skb_reset_mac_header(skb);
+		skb->dev = dev->net; /* normally set by eth_type_trans */
+		skb->protocol = proto;
+		return 1;
+	}
+
+	if (skb_headroom(skb) < ETH_HLEN)
+		return 0;
+	skb_push(skb, ETH_HLEN);
+	skb_reset_mac_header(skb);
+	eth_hdr(skb)->h_proto = proto;
+	eth_zero_addr(eth_hdr(skb)->h_source);
+fix_dest:
+	memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
+	return 1;
+}
+
+/* very simplistic detection of IPv4 or IPv6 headers */
+static bool possibly_iphdr(const char *data)
+{
+	return (data[0] & 0xd0) == 0x40;
+}
+
+/* disallow addresses which may be confused with IP headers */
+static int qmi_wwan_mac_addr(struct net_device *dev, void *p)
+{
+	int ret;
+	struct sockaddr *addr = p;
+
+	ret = eth_prepare_mac_addr_change(dev, p);
+	if (ret < 0)
+		return ret;
+	if (possibly_iphdr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+	eth_commit_mac_addr_change(dev, p);
+	return 0;
+}
+
+static const struct net_device_ops qmi_wwan_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address	= qmi_wwan_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+/* using a counter to merge subdriver requests with our own into a
+ * combined state
+ */
+static int qmi_wwan_manage_power(struct usbnet *dev, int on)
+{
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	int rv;
+
+	dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__,
+		atomic_read(&info->pmcount), on);
+
+	if ((on && atomic_add_return(1, &info->pmcount) == 1) ||
+	    (!on && atomic_dec_and_test(&info->pmcount))) {
+		/* need autopm_get/put here to ensure the usbcore sees
+		 * the new value
+		 */
+		rv = usb_autopm_get_interface(dev->intf);
+		dev->intf->needs_remote_wakeup = on;
+		if (!rv)
+			usb_autopm_put_interface(dev->intf);
+	}
+	return 0;
+}
+
+static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+
+	/* can be called while disconnecting */
+	if (!dev)
+		return 0;
+	return qmi_wwan_manage_power(dev, on);
+}
+
+/* collect all three endpoints and register subdriver */
+static int qmi_wwan_register_subdriver(struct usbnet *dev)
+{
+	int rv;
+	struct usb_driver *subdriver = NULL;
+	struct qmi_wwan_state *info = (void *)&dev->data;
+
+	/* collect bulk endpoints */
+	rv = usbnet_get_endpoints(dev, info->data);
+	if (rv < 0)
+		goto err;
+
+	/* update status endpoint if separate control interface */
+	if (info->control != info->data)
+		dev->status = &info->control->cur_altsetting->endpoint[0];
+
+	/* require interrupt endpoint for subdriver */
+	if (!dev->status) {
+		rv = -EINVAL;
+		goto err;
+	}
+
+	/* for subdriver power management */
+	atomic_set(&info->pmcount, 0);
+
+	/* register subdriver */
+	subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc,
+					 4096, WWAN_PORT_QMI,
+					 &qmi_wwan_cdc_wdm_manage_power);
+	if (IS_ERR(subdriver)) {
+		dev_err(&info->control->dev, "subdriver registration failed\n");
+		rv = PTR_ERR(subdriver);
+		goto err;
+	}
+
+	/* prevent usbnet from using status endpoint */
+	dev->status = NULL;
+
+	/* save subdriver struct for suspend/resume wrappers */
+	info->subdriver = subdriver;
+
+err:
+	return rv;
+}
+
+/* Send CDC SetControlLineState request, setting or clearing the DTR.
+ * "Required for Autoconnect and 9x30 to wake up" according to the
+ * GobiNet driver. The requirement has been verified on an MDM9230
+ * based Sierra Wireless MC7455
+ */
+static int qmi_wwan_change_dtr(struct usbnet *dev, bool on)
+{
+	u8 intf = dev->intf->cur_altsetting->desc.bInterfaceNumber;
+
+	return usbnet_write_cmd(dev, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+				USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+				on ? 0x01 : 0x00, intf, NULL, 0);
+}
+
+static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status;
+	u8 *buf = intf->cur_altsetting->extra;
+	int len = intf->cur_altsetting->extralen;
+	struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
+	struct usb_cdc_union_desc *cdc_union;
+	struct usb_cdc_ether_desc *cdc_ether;
+	struct usb_driver *driver = driver_of(intf);
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	struct usb_cdc_parsed_header hdr;
+
+	BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) <
+		      sizeof(struct qmi_wwan_state)));
+
+	/* set up initial state */
+	info->control = intf;
+	info->data = intf;
+
+	/* and a number of CDC descriptors */
+	cdc_parse_cdc_header(&hdr, intf, buf, len);
+	cdc_union = hdr.usb_cdc_union_desc;
+	cdc_ether = hdr.usb_cdc_ether_desc;
+
+	/* Use separate control and data interfaces if we found a CDC Union */
+	if (cdc_union) {
+		info->data = usb_ifnum_to_if(dev->udev,
+					     cdc_union->bSlaveInterface0);
+		if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 ||
+		    !info->data) {
+			dev_err(&intf->dev,
+				"bogus CDC Union: master=%u, slave=%u\n",
+				cdc_union->bMasterInterface0,
+				cdc_union->bSlaveInterface0);
+
+			/* ignore and continue... */
+			cdc_union = NULL;
+			info->data = intf;
+		}
+	}
+
+	/* errors aren't fatal - we can live with the dynamic address */
+	if (cdc_ether && cdc_ether->wMaxSegmentSize) {
+		dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize);
+		usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
+	}
+
+	/* claim data interface and set it up */
+	if (info->control != info->data) {
+		status = usb_driver_claim_interface(driver, info->data, dev);
+		if (status < 0)
+			goto err;
+	}
+
+	status = qmi_wwan_register_subdriver(dev);
+	if (status < 0 && info->control != info->data) {
+		usb_set_intfdata(info->data, NULL);
+		usb_driver_release_interface(driver, info->data);
+	}
+
+	/* disabling remote wakeup on MDM9x30 devices has the same
+	 * effect as clearing DTR. The device will not respond to QMI
+	 * requests until we set DTR again.  This is similar to a
+	 * QMI_CTL SYNC request, clearing a lot of firmware state
+	 * including the client ID allocations.
+	 *
+	 * Our usage model allows a session to span multiple
+	 * open/close events, so we must prevent the firmware from
+	 * clearing out state the clients might need.
+	 *
+	 * MDM9x30 is the first QMI chipset with USB3 support. Abuse
+	 * this fact to enable the quirk for all USB3 devices.
+	 *
+	 * There are also chipsets with the same "set DTR" requirement
+	 * but without USB3 support.  Devices based on these chips
+	 * need a quirk flag in the device ID table.
+	 */
+	if (dev->driver_info->data & QMI_WWAN_QUIRK_DTR ||
+	    le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
+		qmi_wwan_manage_power(dev, 1);
+		qmi_wwan_change_dtr(dev, true);
+	}
+
+	/* Never use the same address on both ends of the link, even if the
+	 * buggy firmware told us to. Or, if device is assigned the well-known
+	 * buggy firmware MAC address, replace it with a random address,
+	 */
+	if (ether_addr_equal(dev->net->dev_addr, default_modem_addr) ||
+	    ether_addr_equal(dev->net->dev_addr, buggy_fw_addr))
+		eth_hw_addr_random(dev->net);
+
+	/* make MAC addr easily distinguishable from an IP header */
+	if (possibly_iphdr(dev->net->dev_addr)) {
+		u8 addr = dev->net->dev_addr[0];
+
+		addr |= 0x02;	/* set local assignment bit */
+		addr &= 0xbf;	/* clear "IP" bit */
+		dev_addr_mod(dev->net, 0, &addr, 1);
+	}
+	dev->net->netdev_ops = &qmi_wwan_netdev_ops;
+	dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group;
+err:
+	return status;
+}
+
+static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	struct usb_driver *driver = driver_of(intf);
+	struct usb_interface *other;
+
+	if (info->subdriver && info->subdriver->disconnect)
+		info->subdriver->disconnect(info->control);
+
+	/* disable MDM9x30 quirk */
+	if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
+		qmi_wwan_change_dtr(dev, false);
+		qmi_wwan_manage_power(dev, 0);
+	}
+
+	/* allow user to unbind using either control or data */
+	if (intf == info->control)
+		other = info->data;
+	else
+		other = info->control;
+
+	/* only if not shared */
+	if (other && intf != other) {
+		usb_set_intfdata(other, NULL);
+		usb_driver_release_interface(driver, other);
+	}
+
+	info->subdriver = NULL;
+	info->data = NULL;
+	info->control = NULL;
+}
+
+/* suspend/resume wrappers calling both usbnet and the cdc-wdm
+ * subdriver if present.
+ *
+ * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
+ * wrappers for those without adding usbnet reset support first.
+ */
+static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	int ret;
+
+	/* Both usbnet_suspend() and subdriver->suspend() MUST return 0
+	 * in system sleep context, otherwise, the resume callback has
+	 * to recover device from previous suspend failure.
+	 */
+	ret = usbnet_suspend(intf, message);
+	if (ret < 0)
+		goto err;
+
+	if (intf == info->control && info->subdriver &&
+	    info->subdriver->suspend)
+		ret = info->subdriver->suspend(intf, message);
+	if (ret < 0)
+		usbnet_resume(intf);
+err:
+	return ret;
+}
+
+static int qmi_wwan_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct qmi_wwan_state *info = (void *)&dev->data;
+	int ret = 0;
+	bool callsub = (intf == info->control && info->subdriver &&
+			info->subdriver->resume);
+
+	if (callsub)
+		ret = info->subdriver->resume(intf);
+	if (ret < 0)
+		goto err;
+	ret = usbnet_resume(intf);
+	if (ret < 0 && callsub)
+		info->subdriver->suspend(intf, PMSG_SUSPEND);
+err:
+	return ret;
+}
+
+static const struct driver_info	qmi_wwan_info = {
+	.description	= "WWAN/QMI device",
+	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
+	.bind		= qmi_wwan_bind,
+	.unbind		= qmi_wwan_unbind,
+	.manage_power	= qmi_wwan_manage_power,
+	.rx_fixup       = qmi_wwan_rx_fixup,
+};
+
+static const struct driver_info	qmi_wwan_info_quirk_dtr = {
+	.description	= "WWAN/QMI device",
+	.flags		= FLAG_WWAN | FLAG_SEND_ZLP,
+	.bind		= qmi_wwan_bind,
+	.unbind		= qmi_wwan_unbind,
+	.manage_power	= qmi_wwan_manage_power,
+	.rx_fixup       = qmi_wwan_rx_fixup,
+	.data           = QMI_WWAN_QUIRK_DTR,
+};
+
+#define HUAWEI_VENDOR_ID	0x12D1
+
+/* map QMI/wwan function by a fixed interface number */
+#define QMI_FIXED_INTF(vend, prod, num) \
+	USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
+	.driver_info = (unsigned long)&qmi_wwan_info
+
+/* devices requiring "set DTR" quirk */
+#define QMI_QUIRK_SET_DTR(vend, prod, num) \
+	USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
+	.driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr
+
+/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
+#define QMI_GOBI1K_DEVICE(vend, prod) \
+	QMI_FIXED_INTF(vend, prod, 3)
+
+/* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */
+#define QMI_GOBI_DEVICE(vend, prod) \
+	QMI_FIXED_INTF(vend, prod, 0)
+
+/* Many devices have QMI and DIAG functions which are distinguishable
+ * from other vendor specific functions by class, subclass and
+ * protocol all being 0xff. The DIAG function has exactly 2 endpoints
+ * and is silently rejected when probed.
+ *
+ * This makes it possible to match dynamically numbered QMI functions
+ * as seen on e.g. many Quectel modems.
+ */
+#define QMI_MATCH_FF_FF_FF(vend, prod) \
+	USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_VENDOR_SPEC, \
+				      USB_SUBCLASS_VENDOR_SPEC, 0xff), \
+	.driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr
+
+static const struct usb_device_id products[] = {
+	/* 1. CDC ECM like devices match on the control interface */
+	{	/* Huawei E392, E398 and possibly others sharing both device id and more... */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Motorola Mapphone devices with MDM6600 */
+		USB_VENDOR_AND_INTERFACE_INFO(0x22b8, USB_CLASS_VENDOR_SPEC, 0xfb, 0xff),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+
+	/* 2. Combined interface devices matching on class+protocol */
+	{	/* Huawei E367 and possibly others in "Windows mode" */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Huawei E392, E398 and possibly others in "Windows mode" */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */
+		USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Pantech UML290, P4200 and more */
+		USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Pantech UML290 - newer firmware */
+		USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Novatel USB551L and MC551 */
+		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001,
+		                              USB_CLASS_COMM,
+		                              USB_CDC_SUBCLASS_ETHERNET,
+		                              USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Novatel E362 */
+		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010,
+		                              USB_CLASS_COMM,
+		                              USB_CDC_SUBCLASS_ETHERNET,
+		                              USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Novatel Expedite E371 */
+		USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9011,
+		                              USB_CLASS_COMM,
+		                              USB_CDC_SUBCLASS_ETHERNET,
+		                              USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Dell Wireless 5800 (Novatel E362) */
+		USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195,
+					      USB_CLASS_COMM,
+					      USB_CDC_SUBCLASS_ETHERNET,
+					      USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Dell Wireless 5800 V2 (Novatel E362) */
+		USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8196,
+					      USB_CLASS_COMM,
+					      USB_CDC_SUBCLASS_ETHERNET,
+					      USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* Dell Wireless 5804 (Novatel E371) */
+		USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x819b,
+					      USB_CLASS_COMM,
+					      USB_CDC_SUBCLASS_ETHERNET,
+					      USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* ADU960S */
+		USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a,
+					      USB_CLASS_COMM,
+					      USB_CDC_SUBCLASS_ETHERNET,
+					      USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* HP lt2523 (Novatel E371) */
+		USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d,
+					      USB_CLASS_COMM,
+					      USB_CDC_SUBCLASS_ETHERNET,
+					      USB_CDC_PROTO_NONE),
+		.driver_info        = (unsigned long)&qmi_wwan_info,
+	},
+	{	/* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */
+		USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x581d, USB_CLASS_VENDOR_SPEC, 1, 7),
+		.driver_info = (unsigned long)&qmi_wwan_info,
+	},
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0125)},	/* Quectel EC25, EC20 R2.0  Mini PCIe */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0306)},	/* Quectel EP06/EG06/EM06 */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0512)},	/* Quectel EG12/EM12 */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0620)},	/* Quectel EM160R-GL */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0800)},	/* Quectel RM500Q-GL */
+	{QMI_MATCH_FF_FF_FF(0x2c7c, 0x0801)},	/* Quectel RM520N */
+
+	/* 3. Combined interface devices matching on interface number */
+	{QMI_FIXED_INTF(0x0408, 0xea42, 4)},	/* Yota / Megafon M100-1 */
+	{QMI_FIXED_INTF(0x05c6, 0x6001, 3)},	/* 4G LTE usb-modem U901 */
+	{QMI_FIXED_INTF(0x05c6, 0x7000, 0)},
+	{QMI_FIXED_INTF(0x05c6, 0x7001, 1)},
+	{QMI_FIXED_INTF(0x05c6, 0x7002, 1)},
+	{QMI_FIXED_INTF(0x05c6, 0x7101, 1)},
+	{QMI_FIXED_INTF(0x05c6, 0x7101, 2)},
+	{QMI_FIXED_INTF(0x05c6, 0x7101, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x7102, 1)},
+	{QMI_FIXED_INTF(0x05c6, 0x7102, 2)},
+	{QMI_FIXED_INTF(0x05c6, 0x7102, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x8000, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x8001, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9000, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9003, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9005, 2)},
+	{QMI_FIXED_INTF(0x05c6, 0x900a, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x900b, 2)},
+	{QMI_FIXED_INTF(0x05c6, 0x900c, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x900c, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x900c, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x900d, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x900f, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x900f, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x900f, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9010, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9010, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9011, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9011, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9021, 1)},
+	{QMI_FIXED_INTF(0x05c6, 0x9022, 2)},
+	{QMI_QUIRK_SET_DTR(0x05c6, 0x9025, 4)},	/* Alcatel-sbell ASB TL131 TDD LTE (China Mobile) */
+	{QMI_FIXED_INTF(0x05c6, 0x9026, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x902e, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9031, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9032, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9033, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9033, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9033, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9033, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9034, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9034, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9034, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9034, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9034, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9035, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9036, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9037, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9038, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x903b, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x903c, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x903d, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x903e, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9043, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9046, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9046, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9046, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9047, 2)},
+	{QMI_FIXED_INTF(0x05c6, 0x9047, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9047, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9048, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9048, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9048, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9048, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9048, 8)},
+	{QMI_FIXED_INTF(0x05c6, 0x904c, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x904c, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x904c, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x904c, 8)},
+	{QMI_FIXED_INTF(0x05c6, 0x9050, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9052, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9053, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9053, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9054, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9054, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9055, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9055, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9055, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9055, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9055, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9056, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9062, 2)},
+	{QMI_FIXED_INTF(0x05c6, 0x9062, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9062, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9062, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9062, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9062, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9062, 8)},
+	{QMI_FIXED_INTF(0x05c6, 0x9062, 9)},
+	{QMI_FIXED_INTF(0x05c6, 0x9064, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9065, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9065, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9066, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9066, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9067, 1)},
+	{QMI_FIXED_INTF(0x05c6, 0x9068, 2)},
+	{QMI_FIXED_INTF(0x05c6, 0x9068, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9068, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9068, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9068, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9068, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9069, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9069, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9069, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9069, 8)},
+	{QMI_FIXED_INTF(0x05c6, 0x9070, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9070, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9075, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9076, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9076, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9076, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9076, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9076, 8)},
+	{QMI_FIXED_INTF(0x05c6, 0x9077, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9077, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9077, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9077, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9078, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9079, 4)},
+	{QMI_FIXED_INTF(0x05c6, 0x9079, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9079, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9079, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9079, 8)},
+	{QMI_FIXED_INTF(0x05c6, 0x9080, 5)},
+	{QMI_FIXED_INTF(0x05c6, 0x9080, 6)},
+	{QMI_FIXED_INTF(0x05c6, 0x9080, 7)},
+	{QMI_FIXED_INTF(0x05c6, 0x9080, 8)},
+	{QMI_FIXED_INTF(0x05c6, 0x9083, 3)},
+	{QMI_FIXED_INTF(0x05c6, 0x9084, 4)},
+	{QMI_QUIRK_SET_DTR(0x05c6, 0x9091, 2)},	/* Compal RXM-G1 */
+	{QMI_FIXED_INTF(0x05c6, 0x90b2, 3)},    /* ublox R410M */
+	{QMI_QUIRK_SET_DTR(0x05c6, 0x90db, 2)},	/* Compal RXM-G1 */
+	{QMI_FIXED_INTF(0x05c6, 0x920d, 0)},
+	{QMI_FIXED_INTF(0x05c6, 0x920d, 5)},
+	{QMI_QUIRK_SET_DTR(0x05c6, 0x9625, 4)},	/* YUGA CLM920-NC5 */
+	{QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
+	{QMI_FIXED_INTF(0x0846, 0x68d3, 8)},	/* Netgear Aircard 779S */
+	{QMI_FIXED_INTF(0x12d1, 0x140c, 1)},	/* Huawei E173 */
+	{QMI_FIXED_INTF(0x12d1, 0x14ac, 1)},	/* Huawei E1820 */
+	{QMI_FIXED_INTF(0x1435, 0x0918, 3)},	/* Wistron NeWeb D16Q1 */
+	{QMI_FIXED_INTF(0x1435, 0x0918, 4)},	/* Wistron NeWeb D16Q1 */
+	{QMI_FIXED_INTF(0x1435, 0x0918, 5)},	/* Wistron NeWeb D16Q1 */
+	{QMI_FIXED_INTF(0x1435, 0x3185, 4)},	/* Wistron NeWeb M18Q5 */
+	{QMI_FIXED_INTF(0x1435, 0xd111, 4)},	/* M9615A DM11-1 D51QC */
+	{QMI_FIXED_INTF(0x1435, 0xd181, 3)},	/* Wistron NeWeb D18Q1 */
+	{QMI_FIXED_INTF(0x1435, 0xd181, 4)},	/* Wistron NeWeb D18Q1 */
+	{QMI_FIXED_INTF(0x1435, 0xd181, 5)},	/* Wistron NeWeb D18Q1 */
+	{QMI_FIXED_INTF(0x1435, 0xd182, 4)},	/* Wistron NeWeb D18 */
+	{QMI_FIXED_INTF(0x1435, 0xd182, 5)},	/* Wistron NeWeb D18 */
+	{QMI_FIXED_INTF(0x1435, 0xd191, 4)},	/* Wistron NeWeb D19Q1 */
+	{QMI_QUIRK_SET_DTR(0x1508, 0x1001, 4)},	/* Fibocom NL668 series */
+	{QMI_FIXED_INTF(0x1690, 0x7588, 4)},    /* ASKEY WWHC050 */
+	{QMI_FIXED_INTF(0x16d8, 0x6003, 0)},	/* CMOTech 6003 */
+	{QMI_FIXED_INTF(0x16d8, 0x6007, 0)},	/* CMOTech CHE-628S */
+	{QMI_FIXED_INTF(0x16d8, 0x6008, 0)},	/* CMOTech CMU-301 */
+	{QMI_FIXED_INTF(0x16d8, 0x6280, 0)},	/* CMOTech CHU-628 */
+	{QMI_FIXED_INTF(0x16d8, 0x7001, 0)},	/* CMOTech CHU-720S */
+	{QMI_FIXED_INTF(0x16d8, 0x7002, 0)},	/* CMOTech 7002 */
+	{QMI_FIXED_INTF(0x16d8, 0x7003, 4)},	/* CMOTech CHU-629K */
+	{QMI_FIXED_INTF(0x16d8, 0x7004, 3)},	/* CMOTech 7004 */
+	{QMI_FIXED_INTF(0x16d8, 0x7006, 5)},	/* CMOTech CGU-629 */
+	{QMI_FIXED_INTF(0x16d8, 0x700a, 4)},	/* CMOTech CHU-629S */
+	{QMI_FIXED_INTF(0x16d8, 0x7211, 0)},	/* CMOTech CHU-720I */
+	{QMI_FIXED_INTF(0x16d8, 0x7212, 0)},	/* CMOTech 7212 */
+	{QMI_FIXED_INTF(0x16d8, 0x7213, 0)},	/* CMOTech 7213 */
+	{QMI_FIXED_INTF(0x16d8, 0x7251, 1)},	/* CMOTech 7251 */
+	{QMI_FIXED_INTF(0x16d8, 0x7252, 1)},	/* CMOTech 7252 */
+	{QMI_FIXED_INTF(0x16d8, 0x7253, 1)},	/* CMOTech 7253 */
+	{QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
+	{QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
+	{QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
+	{QMI_FIXED_INTF(0x19d2, 0x0019, 3)},	/* ONDA MT689DC */
+	{QMI_FIXED_INTF(0x19d2, 0x0021, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x0025, 1)},
+	{QMI_FIXED_INTF(0x19d2, 0x0031, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x0042, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x0049, 5)},
+	{QMI_FIXED_INTF(0x19d2, 0x0052, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x0055, 1)},	/* ZTE (Vodafone) K3520-Z */
+	{QMI_FIXED_INTF(0x19d2, 0x0058, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x0063, 4)},	/* ZTE (Vodafone) K3565-Z */
+	{QMI_FIXED_INTF(0x19d2, 0x0104, 4)},	/* ZTE (Vodafone) K4505-Z */
+	{QMI_FIXED_INTF(0x19d2, 0x0113, 5)},
+	{QMI_FIXED_INTF(0x19d2, 0x0118, 5)},
+	{QMI_FIXED_INTF(0x19d2, 0x0121, 5)},
+	{QMI_FIXED_INTF(0x19d2, 0x0123, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x0124, 5)},
+	{QMI_FIXED_INTF(0x19d2, 0x0125, 6)},
+	{QMI_FIXED_INTF(0x19d2, 0x0126, 5)},
+	{QMI_FIXED_INTF(0x19d2, 0x0130, 1)},
+	{QMI_FIXED_INTF(0x19d2, 0x0133, 3)},
+	{QMI_FIXED_INTF(0x19d2, 0x0141, 5)},
+	{QMI_FIXED_INTF(0x19d2, 0x0157, 5)},	/* ZTE MF683 */
+	{QMI_FIXED_INTF(0x19d2, 0x0158, 3)},
+	{QMI_FIXED_INTF(0x19d2, 0x0167, 4)},	/* ZTE MF820D */
+	{QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
+	{QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
+	{QMI_FIXED_INTF(0x19d2, 0x0189, 4)},    /* ZTE MF290 */
+	{QMI_FIXED_INTF(0x19d2, 0x0191, 4)},	/* ZTE EuFi890 */
+	{QMI_FIXED_INTF(0x19d2, 0x0199, 1)},	/* ZTE MF820S */
+	{QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
+	{QMI_FIXED_INTF(0x19d2, 0x0257, 3)},	/* ZTE MF821 */
+	{QMI_FIXED_INTF(0x19d2, 0x0265, 4)},	/* ONDA MT8205 4G LTE */
+	{QMI_FIXED_INTF(0x19d2, 0x0284, 4)},	/* ZTE MF880 */
+	{QMI_FIXED_INTF(0x19d2, 0x0326, 4)},	/* ZTE MF821D */
+	{QMI_FIXED_INTF(0x19d2, 0x0396, 3)},	/* ZTE ZM8620 */
+	{QMI_FIXED_INTF(0x19d2, 0x0412, 4)},	/* Telewell TW-LTE 4G */
+	{QMI_FIXED_INTF(0x19d2, 0x1008, 4)},	/* ZTE (Vodafone) K3570-Z */
+	{QMI_FIXED_INTF(0x19d2, 0x1010, 4)},	/* ZTE (Vodafone) K3571-Z */
+	{QMI_FIXED_INTF(0x19d2, 0x1012, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x1018, 3)},	/* ZTE (Vodafone) K5006-Z */
+	{QMI_FIXED_INTF(0x19d2, 0x1021, 2)},
+	{QMI_FIXED_INTF(0x19d2, 0x1245, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x1247, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x1252, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x1254, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
+	{QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
+	{QMI_FIXED_INTF(0x19d2, 0x1270, 5)},	/* ZTE MF667 */
+	{QMI_FIXED_INTF(0x19d2, 0x1275, 3)},	/* ZTE P685M */
+	{QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
+	{QMI_FIXED_INTF(0x19d2, 0x1402, 2)},	/* ZTE MF60 */
+	{QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
+	{QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
+	{QMI_FIXED_INTF(0x19d2, 0x1426, 2)},	/* ZTE MF91 */
+	{QMI_FIXED_INTF(0x19d2, 0x1428, 2)},	/* Telewell TW-LTE 4G v2 */
+	{QMI_FIXED_INTF(0x19d2, 0x1432, 3)},	/* ZTE ME3620 */
+	{QMI_FIXED_INTF(0x19d2, 0x1485, 5)},	/* ZTE MF286D */
+	{QMI_FIXED_INTF(0x19d2, 0x2002, 4)},	/* ZTE (Vodafone) K3765-Z */
+	{QMI_FIXED_INTF(0x2001, 0x7e16, 3)},	/* D-Link DWM-221 */
+	{QMI_FIXED_INTF(0x2001, 0x7e19, 4)},	/* D-Link DWM-221 B1 */
+	{QMI_FIXED_INTF(0x2001, 0x7e35, 4)},	/* D-Link DWM-222 */
+	{QMI_FIXED_INTF(0x2001, 0x7e3d, 4)},	/* D-Link DWM-222 A2 */
+	{QMI_FIXED_INTF(0x2020, 0x2031, 4)},	/* Olicard 600 */
+	{QMI_FIXED_INTF(0x2020, 0x2033, 4)},	/* BroadMobi BM806U */
+	{QMI_QUIRK_SET_DTR(0x2020, 0x2060, 4)},	/* BroadMobi BM818 */
+	{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)},    /* Sierra Wireless MC7700 */
+	{QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */
+	{QMI_FIXED_INTF(0x1199, 0x68a2, 8)},	/* Sierra Wireless MC7710 in QMI mode */
+	{QMI_FIXED_INTF(0x1199, 0x68a2, 19)},	/* Sierra Wireless MC7710 in QMI mode */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 8)},	/* Sierra Wireless MC7304/MC7354, WP76xx */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 10)},/* Sierra Wireless MC7304/MC7354 */
+	{QMI_FIXED_INTF(0x1199, 0x901c, 8)},    /* Sierra Wireless EM7700 */
+	{QMI_FIXED_INTF(0x1199, 0x901f, 8)},    /* Sierra Wireless EM7355 */
+	{QMI_FIXED_INTF(0x1199, 0x9041, 8)},	/* Sierra Wireless MC7305/MC7355 */
+	{QMI_FIXED_INTF(0x1199, 0x9041, 10)},	/* Sierra Wireless MC7305/MC7355 */
+	{QMI_FIXED_INTF(0x1199, 0x9051, 8)},	/* Netgear AirCard 340U */
+	{QMI_FIXED_INTF(0x1199, 0x9053, 8)},	/* Sierra Wireless Modem */
+	{QMI_FIXED_INTF(0x1199, 0x9054, 8)},	/* Sierra Wireless Modem */
+	{QMI_FIXED_INTF(0x1199, 0x9055, 8)},	/* Netgear AirCard 341U */
+	{QMI_FIXED_INTF(0x1199, 0x9056, 8)},	/* Sierra Wireless Modem */
+	{QMI_FIXED_INTF(0x1199, 0x9057, 8)},
+	{QMI_FIXED_INTF(0x1199, 0x9061, 8)},	/* Sierra Wireless Modem */
+	{QMI_FIXED_INTF(0x1199, 0x9063, 8)},	/* Sierra Wireless EM7305 */
+	{QMI_FIXED_INTF(0x1199, 0x9063, 10)},	/* Sierra Wireless EM7305 */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x9071, 8)},	/* Sierra Wireless MC74xx */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x9071, 10)},/* Sierra Wireless MC74xx */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x9079, 8)},	/* Sierra Wireless EM74xx */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x9079, 10)},/* Sierra Wireless EM74xx */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x907b, 8)},	/* Sierra Wireless EM74xx */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x907b, 10)},/* Sierra Wireless EM74xx */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x9091, 8)},	/* Sierra Wireless EM7565 */
+	{QMI_QUIRK_SET_DTR(0x1199, 0xc081, 8)},	/* Sierra Wireless EM7590 */
+	{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)},	/* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
+	{QMI_FIXED_INTF(0x1bbb, 0x0203, 2)},	/* Alcatel L800MA */
+	{QMI_FIXED_INTF(0x2357, 0x0201, 4)},	/* TP-LINK HSUPA Modem MA180 */
+	{QMI_FIXED_INTF(0x2357, 0x9000, 4)},	/* TP-LINK MA260 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x103a, 0)}, /* Telit LE910C4-WWX */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)},	/* Telit LE922A */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)},	/* Telit FN980 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1057, 2)},	/* Telit FN980 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)},	/* Telit LN920 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)},	/* Telit FN990 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1080, 2)}, /* Telit FE990 */
+	{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},	/* Telit ME910 */
+	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
+	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)},	/* Telit LE920, LE920A4 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1230, 2)},	/* Telit LE910Cx */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1250, 0)},	/* Telit LE910Cx */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)},	/* Telit LE910Cx */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)},	/* Telit LE910Cx */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)},	/* Telit LN940 series */
+	{QMI_FIXED_INTF(0x1c9e, 0x9801, 3)},	/* Telewell TW-3G HSPA+ */
+	{QMI_FIXED_INTF(0x1c9e, 0x9803, 4)},	/* Telewell TW-3G HSPA+ */
+	{QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)},	/* XS Stick W100-2 from 4G Systems */
+	{QMI_FIXED_INTF(0x0b3c, 0xc000, 4)},	/* Olivetti Olicard 100 */
+	{QMI_FIXED_INTF(0x0b3c, 0xc001, 4)},	/* Olivetti Olicard 120 */
+	{QMI_FIXED_INTF(0x0b3c, 0xc002, 4)},	/* Olivetti Olicard 140 */
+	{QMI_FIXED_INTF(0x0b3c, 0xc004, 6)},	/* Olivetti Olicard 155 */
+	{QMI_FIXED_INTF(0x0b3c, 0xc005, 6)},	/* Olivetti Olicard 200 */
+	{QMI_FIXED_INTF(0x0b3c, 0xc00a, 6)},	/* Olivetti Olicard 160 */
+	{QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)},	/* Olivetti Olicard 500 */
+	{QMI_FIXED_INTF(0x1e2d, 0x0060, 4)},	/* Cinterion PLxx */
+	{QMI_QUIRK_SET_DTR(0x1e2d, 0x006f, 8)}, /* Cinterion PLS83/PLS63 */
+	{QMI_FIXED_INTF(0x1e2d, 0x0053, 4)},	/* Cinterion PHxx,PXxx */
+	{QMI_FIXED_INTF(0x1e2d, 0x0063, 10)},	/* Cinterion ALASxx (1 RmNet) */
+	{QMI_FIXED_INTF(0x1e2d, 0x0082, 4)},	/* Cinterion PHxx,PXxx (2 RmNet) */
+	{QMI_FIXED_INTF(0x1e2d, 0x0082, 5)},	/* Cinterion PHxx,PXxx (2 RmNet) */
+	{QMI_FIXED_INTF(0x1e2d, 0x0083, 4)},	/* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/
+	{QMI_QUIRK_SET_DTR(0x1e2d, 0x00b0, 4)},	/* Cinterion CLS8 */
+	{QMI_FIXED_INTF(0x1e2d, 0x00b7, 0)},	/* Cinterion MV31 RmNet */
+	{QMI_FIXED_INTF(0x1e2d, 0x00b9, 0)},	/* Cinterion MV31 RmNet based on new baseline */
+	{QMI_FIXED_INTF(0x1e2d, 0x00f3, 0)},	/* Cinterion MV32-W-A RmNet */
+	{QMI_FIXED_INTF(0x1e2d, 0x00f4, 0)},	/* Cinterion MV32-W-B RmNet */
+	{QMI_FIXED_INTF(0x413c, 0x81a2, 8)},	/* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
+	{QMI_FIXED_INTF(0x413c, 0x81a3, 8)},	/* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
+	{QMI_FIXED_INTF(0x413c, 0x81a4, 8)},	/* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
+	{QMI_FIXED_INTF(0x413c, 0x81a8, 8)},	/* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
+	{QMI_FIXED_INTF(0x413c, 0x81a9, 8)},	/* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
+	{QMI_FIXED_INTF(0x413c, 0x81b1, 8)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
+	{QMI_FIXED_INTF(0x413c, 0x81b3, 8)},	/* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
+	{QMI_FIXED_INTF(0x413c, 0x81b6, 8)},	/* Dell Wireless 5811e */
+	{QMI_FIXED_INTF(0x413c, 0x81b6, 10)},	/* Dell Wireless 5811e */
+	{QMI_FIXED_INTF(0x413c, 0x81c2, 8)},	/* Dell Wireless 5811e */
+	{QMI_FIXED_INTF(0x413c, 0x81cc, 8)},	/* Dell Wireless 5816e */
+	{QMI_FIXED_INTF(0x413c, 0x81d7, 0)},	/* Dell Wireless 5821e */
+	{QMI_FIXED_INTF(0x413c, 0x81d7, 1)},	/* Dell Wireless 5821e preproduction config */
+	{QMI_FIXED_INTF(0x413c, 0x81e0, 0)},	/* Dell Wireless 5821e with eSIM support*/
+	{QMI_FIXED_INTF(0x413c, 0x81e4, 0)},	/* Dell Wireless 5829e with eSIM support*/
+	{QMI_FIXED_INTF(0x413c, 0x81e6, 0)},	/* Dell Wireless 5829e */
+	{QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)},	/* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
+	{QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)},	/* HP lt4120 Snapdragon X5 LTE */
+	{QMI_QUIRK_SET_DTR(0x22de, 0x9051, 2)}, /* Hucom Wireless HM-211S/K */
+	{QMI_FIXED_INTF(0x22de, 0x9061, 3)},	/* WeTelecom WPD-600N */
+	{QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)},	/* SIMCom 7100E, 7230E, 7600E ++ */
+	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)},	/* Quectel EC21 Mini PCIe */
+	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)},	/* Quectel EG91 */
+	{QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)},	/* Quectel EG95 */
+	{QMI_FIXED_INTF(0x2c7c, 0x0296, 4)},	/* Quectel BG96 */
+	{QMI_QUIRK_SET_DTR(0x2c7c, 0x030e, 4)},	/* Quectel EM05GV2 */
+	{QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)},	/* Fibocom NL678 series */
+	{QMI_FIXED_INTF(0x0489, 0xe0b4, 0)},	/* Foxconn T77W968 LTE */
+	{QMI_FIXED_INTF(0x0489, 0xe0b5, 0)},	/* Foxconn T77W968 LTE with eSIM support*/
+	{QMI_FIXED_INTF(0x2692, 0x9025, 4)},    /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */
+	{QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)},	/* u-blox LARA-L6 */
+
+	/* 4. Gobi 1000 devices */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
+	{QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */
+	{QMI_GOBI1K_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x1410, 0xa001)},	/* Novatel/Verizon USB-1000 */
+	{QMI_GOBI1K_DEVICE(0x1410, 0xa002)},	/* Novatel Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x1410, 0xa003)},	/* Novatel Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x1410, 0xa004)},	/* Novatel Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x1410, 0xa005)},	/* Novatel Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x1410, 0xa006)},	/* Novatel Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x1410, 0xa007)},	/* Novatel Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9001)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */
+	{QMI_GOBI1K_DEVICE(0x05c6, 0x9009)},	/* Generic Gobi Modem device */
+
+	/* 5. Gobi 2000 and 3000 devices */
+	{QMI_GOBI_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
+	{QMI_GOBI_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
+	{QMI_GOBI_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
+	{QMI_GOBI_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
+	{QMI_GOBI_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */
+	{QMI_GOBI_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */
+	{QMI_GOBI_DEVICE(0x05c6, 0x9215)},	/* Acer Gobi 2000 Modem device (VP413) */
+	{QMI_FIXED_INTF(0x05c6, 0x9215, 4)},	/* Quectel EC20 Mini PCIe */
+	{QMI_GOBI_DEVICE(0x05c6, 0x9265)},	/* Asus Gobi 2000 Modem device (VR305) */
+	{QMI_GOBI_DEVICE(0x05c6, 0x9235)},	/* Top Global Gobi 2000 Modem device (VR306) */
+	{QMI_GOBI_DEVICE(0x05c6, 0x9275)},	/* iRex Technologies Gobi 2000 Modem device (VR307) */
+	{QMI_GOBI_DEVICE(0x0af0, 0x8120)},	/* Option GTM681W */
+	{QMI_GOBI_DEVICE(0x1199, 0x68a5)},	/* Sierra Wireless Modem */
+	{QMI_GOBI_DEVICE(0x1199, 0x68a9)},	/* Sierra Wireless Modem */
+	{QMI_GOBI_DEVICE(0x1199, 0x9001)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x9002)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x9003)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x9004)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x9005)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x9006)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x9007)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x9008)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x9009)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */
+	{QMI_GOBI_DEVICE(0x1199, 0x9011)},	/* Sierra Wireless Gobi 2000 Modem device (MC8305) */
+	{QMI_GOBI_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */
+	{QMI_GOBI_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */
+	{QMI_GOBI_DEVICE(0x1199, 0x9013)},	/* Sierra Wireless Gobi 3000 Modem device (MC8355) */
+	{QMI_GOBI_DEVICE(0x03f0, 0x371d)},	/* HP un2430 Mobile Broadband Module */
+	{QMI_GOBI_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */
+	{QMI_GOBI_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
+	{QMI_GOBI_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */
+	{QMI_GOBI_DEVICE(0x12d1, 0x14f1)},	/* Sony Gobi 3000 Composite */
+	{QMI_GOBI_DEVICE(0x1410, 0xa021)},	/* Foxconn Gobi 3000 Modem device (Novatel E396) */
+
+	{ }					/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static bool quectel_ec20_detected(struct usb_interface *intf)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+
+	if (dev->actconfig &&
+	    le16_to_cpu(dev->descriptor.idVendor) == 0x05c6 &&
+	    le16_to_cpu(dev->descriptor.idProduct) == 0x9215 &&
+	    dev->actconfig->desc.bNumInterfaces == 5)
+		return true;
+
+	return false;
+}
+
+static int qmi_wwan_probe(struct usb_interface *intf,
+			  const struct usb_device_id *prod)
+{
+	struct usb_device_id *id = (struct usb_device_id *)prod;
+	struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
+
+	/* Workaround to enable dynamic IDs.  This disables usbnet
+	 * blacklisting functionality.  Which, if required, can be
+	 * reimplemented here by using a magic "blacklist" value
+	 * instead of 0 in the static device id table
+	 */
+	if (!id->driver_info) {
+		dev_dbg(&intf->dev, "setting defaults for dynamic device id\n");
+		id->driver_info = (unsigned long)&qmi_wwan_info;
+	}
+
+	/* There are devices where the same interface number can be
+	 * configured as different functions. We should only bind to
+	 * vendor specific functions when matching on interface number
+	 */
+	if (id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER &&
+	    desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) {
+		dev_dbg(&intf->dev,
+			"Rejecting interface number match for class %02x\n",
+			desc->bInterfaceClass);
+		return -ENODEV;
+	}
+
+	/* Quectel EC20 quirk where we've QMI on interface 4 instead of 0 */
+	if (quectel_ec20_detected(intf) && desc->bInterfaceNumber == 0) {
+		dev_dbg(&intf->dev, "Quectel EC20 quirk, skipping interface 0\n");
+		return -ENODEV;
+	}
+
+	/* Several Quectel modems supports dynamic interface configuration, so
+	 * we need to match on class/subclass/protocol. These values are
+	 * identical for the diagnostic- and QMI-interface, but bNumEndpoints is
+	 * different. Ignore the current interface if the number of endpoints
+	 * equals the number for the diag interface (two).
+	 */
+	if (desc->bNumEndpoints == 2)
+		return -ENODEV;
+
+	return usbnet_probe(intf, id);
+}
+
+static void qmi_wwan_disconnect(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct qmi_wwan_state *info;
+	struct list_head *iter;
+	struct net_device *ldev;
+	LIST_HEAD(list);
+
+	/* called twice if separate control and data intf */
+	if (!dev)
+		return;
+	info = (void *)&dev->data;
+	if (info->flags & QMI_WWAN_FLAG_MUX) {
+		if (!rtnl_trylock()) {
+			restart_syscall();
+			return;
+		}
+		rcu_read_lock();
+		netdev_for_each_upper_dev_rcu(dev->net, ldev, iter)
+			qmimux_unregister_device(ldev, &list);
+		rcu_read_unlock();
+		unregister_netdevice_many(&list);
+		rtnl_unlock();
+		info->flags &= ~QMI_WWAN_FLAG_MUX;
+	}
+	usbnet_disconnect(intf);
+}
+
+static struct usb_driver qmi_wwan_driver = {
+	.name		      = "qmi_wwan",
+	.id_table	      = products,
+	.probe		      = qmi_wwan_probe,
+	.disconnect	      = qmi_wwan_disconnect,
+	.suspend	      = qmi_wwan_suspend,
+	.resume		      =	qmi_wwan_resume,
+	.reset_resume         = qmi_wwan_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(qmi_wwan_driver);
+
+MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
+MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
new file mode 100644
index 000000000..958a02b19
--- /dev/null
+++ b/drivers/net/usb/r8152.c
@@ -0,0 +1,9968 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (c) 2014 Realtek Semiconductor Corp. All rights reserved.
+ */
+
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+#include <linux/uaccess.h>
+#include <linux/list.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <net/ip6_checksum.h>
+#include <uapi/linux/mdio.h>
+#include <linux/mdio.h>
+#include <linux/usb/cdc.h>
+#include <linux/suspend.h>
+#include <linux/atomic.h>
+#include <linux/acpi.h>
+#include <linux/firmware.h>
+#include <crypto/hash.h>
+#include <linux/usb/r8152.h>
+
+/* Information for net-next */
+#define NETNEXT_VERSION		"12"
+
+/* Information for net */
+#define NET_VERSION		"13"
+
+#define DRIVER_VERSION		"v1." NETNEXT_VERSION "." NET_VERSION
+#define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
+#define DRIVER_DESC "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
+#define MODULENAME "r8152"
+
+#define R8152_PHY_ID		32
+
+#define PLA_IDR			0xc000
+#define PLA_RCR			0xc010
+#define PLA_RCR1		0xc012
+#define PLA_RMS			0xc016
+#define PLA_RXFIFO_CTRL0	0xc0a0
+#define PLA_RXFIFO_FULL		0xc0a2
+#define PLA_RXFIFO_CTRL1	0xc0a4
+#define PLA_RX_FIFO_FULL	0xc0a6
+#define PLA_RXFIFO_CTRL2	0xc0a8
+#define PLA_RX_FIFO_EMPTY	0xc0aa
+#define PLA_DMY_REG0		0xc0b0
+#define PLA_FMC			0xc0b4
+#define PLA_CFG_WOL		0xc0b6
+#define PLA_TEREDO_CFG		0xc0bc
+#define PLA_TEREDO_WAKE_BASE	0xc0c4
+#define PLA_MAR			0xcd00
+#define PLA_BACKUP		0xd000
+#define PLA_BDC_CR		0xd1a0
+#define PLA_TEREDO_TIMER	0xd2cc
+#define PLA_REALWOW_TIMER	0xd2e8
+#define PLA_UPHY_TIMER		0xd388
+#define PLA_SUSPEND_FLAG	0xd38a
+#define PLA_INDICATE_FALG	0xd38c
+#define PLA_MACDBG_PRE		0xd38c	/* RTL_VER_04 only */
+#define PLA_MACDBG_POST		0xd38e	/* RTL_VER_04 only */
+#define PLA_EXTRA_STATUS	0xd398
+#define PLA_GPHY_CTRL		0xd3ae
+#define PLA_POL_GPIO_CTRL	0xdc6a
+#define PLA_EFUSE_DATA		0xdd00
+#define PLA_EFUSE_CMD		0xdd02
+#define PLA_LEDSEL		0xdd90
+#define PLA_LED_FEATURE		0xdd92
+#define PLA_PHYAR		0xde00
+#define PLA_BOOT_CTRL		0xe004
+#define PLA_LWAKE_CTRL_REG	0xe007
+#define PLA_GPHY_INTR_IMR	0xe022
+#define PLA_EEE_CR		0xe040
+#define PLA_EEE_TXTWSYS		0xe04c
+#define PLA_EEE_TXTWSYS_2P5G	0xe058
+#define PLA_EEEP_CR		0xe080
+#define PLA_MAC_PWR_CTRL	0xe0c0
+#define PLA_MAC_PWR_CTRL2	0xe0ca
+#define PLA_MAC_PWR_CTRL3	0xe0cc
+#define PLA_MAC_PWR_CTRL4	0xe0ce
+#define PLA_WDT6_CTRL		0xe428
+#define PLA_TCR0		0xe610
+#define PLA_TCR1		0xe612
+#define PLA_MTPS		0xe615
+#define PLA_TXFIFO_CTRL		0xe618
+#define PLA_TXFIFO_FULL		0xe61a
+#define PLA_RSTTALLY		0xe800
+#define PLA_CR			0xe813
+#define PLA_CRWECR		0xe81c
+#define PLA_CONFIG12		0xe81e	/* CONFIG1, CONFIG2 */
+#define PLA_CONFIG34		0xe820	/* CONFIG3, CONFIG4 */
+#define PLA_CONFIG5		0xe822
+#define PLA_PHY_PWR		0xe84c
+#define PLA_OOB_CTRL		0xe84f
+#define PLA_CPCR		0xe854
+#define PLA_MISC_0		0xe858
+#define PLA_MISC_1		0xe85a
+#define PLA_OCP_GPHY_BASE	0xe86c
+#define PLA_TALLYCNT		0xe890
+#define PLA_SFF_STS_7		0xe8de
+#define PLA_PHYSTATUS		0xe908
+#define PLA_CONFIG6		0xe90a /* CONFIG6 */
+#define PLA_USB_CFG		0xe952
+#define PLA_BP_BA		0xfc26
+#define PLA_BP_0		0xfc28
+#define PLA_BP_1		0xfc2a
+#define PLA_BP_2		0xfc2c
+#define PLA_BP_3		0xfc2e
+#define PLA_BP_4		0xfc30
+#define PLA_BP_5		0xfc32
+#define PLA_BP_6		0xfc34
+#define PLA_BP_7		0xfc36
+#define PLA_BP_EN		0xfc38
+
+#define USB_USB2PHY		0xb41e
+#define USB_SSPHYLINK1		0xb426
+#define USB_SSPHYLINK2		0xb428
+#define USB_L1_CTRL		0xb45e
+#define USB_U2P3_CTRL		0xb460
+#define USB_CSR_DUMMY1		0xb464
+#define USB_CSR_DUMMY2		0xb466
+#define USB_DEV_STAT		0xb808
+#define USB_CONNECT_TIMER	0xcbf8
+#define USB_MSC_TIMER		0xcbfc
+#define USB_BURST_SIZE		0xcfc0
+#define USB_FW_FIX_EN0		0xcfca
+#define USB_FW_FIX_EN1		0xcfcc
+#define USB_LPM_CONFIG		0xcfd8
+#define USB_ECM_OPTION		0xcfee
+#define USB_CSTMR		0xcfef	/* RTL8153A */
+#define USB_MISC_2		0xcfff
+#define USB_ECM_OP		0xd26b
+#define USB_GPHY_CTRL		0xd284
+#define USB_SPEED_OPTION	0xd32a
+#define USB_FW_CTRL		0xd334	/* RTL8153B */
+#define USB_FC_TIMER		0xd340
+#define USB_USB_CTRL		0xd406
+#define USB_PHY_CTRL		0xd408
+#define USB_TX_AGG		0xd40a
+#define USB_RX_BUF_TH		0xd40c
+#define USB_USB_TIMER		0xd428
+#define USB_RX_EARLY_TIMEOUT	0xd42c
+#define USB_RX_EARLY_SIZE	0xd42e
+#define USB_PM_CTRL_STATUS	0xd432	/* RTL8153A */
+#define USB_RX_EXTRA_AGGR_TMR	0xd432	/* RTL8153B */
+#define USB_TX_DMA		0xd434
+#define USB_UPT_RXDMA_OWN	0xd437
+#define USB_UPHY3_MDCMDIO	0xd480
+#define USB_TOLERANCE		0xd490
+#define USB_LPM_CTRL		0xd41a
+#define USB_BMU_RESET		0xd4b0
+#define USB_BMU_CONFIG		0xd4b4
+#define USB_U1U2_TIMER		0xd4da
+#define USB_FW_TASK		0xd4e8	/* RTL8153B */
+#define USB_RX_AGGR_NUM		0xd4ee
+#define USB_UPS_CTRL		0xd800
+#define USB_POWER_CUT		0xd80a
+#define USB_MISC_0		0xd81a
+#define USB_MISC_1		0xd81f
+#define USB_AFE_CTRL2		0xd824
+#define USB_UPHY_XTAL		0xd826
+#define USB_UPS_CFG		0xd842
+#define USB_UPS_FLAGS		0xd848
+#define USB_WDT1_CTRL		0xe404
+#define USB_WDT11_CTRL		0xe43c
+#define USB_BP_BA		PLA_BP_BA
+#define USB_BP_0		PLA_BP_0
+#define USB_BP_1		PLA_BP_1
+#define USB_BP_2		PLA_BP_2
+#define USB_BP_3		PLA_BP_3
+#define USB_BP_4		PLA_BP_4
+#define USB_BP_5		PLA_BP_5
+#define USB_BP_6		PLA_BP_6
+#define USB_BP_7		PLA_BP_7
+#define USB_BP_EN		PLA_BP_EN	/* RTL8153A */
+#define USB_BP_8		0xfc38		/* RTL8153B */
+#define USB_BP_9		0xfc3a
+#define USB_BP_10		0xfc3c
+#define USB_BP_11		0xfc3e
+#define USB_BP_12		0xfc40
+#define USB_BP_13		0xfc42
+#define USB_BP_14		0xfc44
+#define USB_BP_15		0xfc46
+#define USB_BP2_EN		0xfc48
+
+/* OCP Registers */
+#define OCP_ALDPS_CONFIG	0x2010
+#define OCP_EEE_CONFIG1		0x2080
+#define OCP_EEE_CONFIG2		0x2092
+#define OCP_EEE_CONFIG3		0x2094
+#define OCP_BASE_MII		0xa400
+#define OCP_EEE_AR		0xa41a
+#define OCP_EEE_DATA		0xa41c
+#define OCP_PHY_STATUS		0xa420
+#define OCP_INTR_EN		0xa424
+#define OCP_NCTL_CFG		0xa42c
+#define OCP_POWER_CFG		0xa430
+#define OCP_EEE_CFG		0xa432
+#define OCP_SRAM_ADDR		0xa436
+#define OCP_SRAM_DATA		0xa438
+#define OCP_DOWN_SPEED		0xa442
+#define OCP_EEE_ABLE		0xa5c4
+#define OCP_EEE_ADV		0xa5d0
+#define OCP_EEE_LPABLE		0xa5d2
+#define OCP_10GBT_CTRL		0xa5d4
+#define OCP_10GBT_STAT		0xa5d6
+#define OCP_EEE_ADV2		0xa6d4
+#define OCP_PHY_STATE		0xa708		/* nway state for 8153 */
+#define OCP_PHY_PATCH_STAT	0xb800
+#define OCP_PHY_PATCH_CMD	0xb820
+#define OCP_PHY_LOCK		0xb82e
+#define OCP_ADC_IOFFSET		0xbcfc
+#define OCP_ADC_CFG		0xbc06
+#define OCP_SYSCLK_CFG		0xc416
+
+/* SRAM Register */
+#define SRAM_GREEN_CFG		0x8011
+#define SRAM_LPF_CFG		0x8012
+#define SRAM_GPHY_FW_VER	0x801e
+#define SRAM_10M_AMP1		0x8080
+#define SRAM_10M_AMP2		0x8082
+#define SRAM_IMPEDANCE		0x8084
+#define SRAM_PHY_LOCK		0xb82e
+
+/* PLA_RCR */
+#define RCR_AAP			0x00000001
+#define RCR_APM			0x00000002
+#define RCR_AM			0x00000004
+#define RCR_AB			0x00000008
+#define RCR_ACPT_ALL		(RCR_AAP | RCR_APM | RCR_AM | RCR_AB)
+#define SLOT_EN			BIT(11)
+
+/* PLA_RCR1 */
+#define OUTER_VLAN		BIT(7)
+#define INNER_VLAN		BIT(6)
+
+/* PLA_RXFIFO_CTRL0 */
+#define RXFIFO_THR1_NORMAL	0x00080002
+#define RXFIFO_THR1_OOB		0x01800003
+
+/* PLA_RXFIFO_FULL */
+#define RXFIFO_FULL_MASK	0xfff
+
+/* PLA_RXFIFO_CTRL1 */
+#define RXFIFO_THR2_FULL	0x00000060
+#define RXFIFO_THR2_HIGH	0x00000038
+#define RXFIFO_THR2_OOB		0x0000004a
+#define RXFIFO_THR2_NORMAL	0x00a0
+
+/* PLA_RXFIFO_CTRL2 */
+#define RXFIFO_THR3_FULL	0x00000078
+#define RXFIFO_THR3_HIGH	0x00000048
+#define RXFIFO_THR3_OOB		0x0000005a
+#define RXFIFO_THR3_NORMAL	0x0110
+
+/* PLA_TXFIFO_CTRL */
+#define TXFIFO_THR_NORMAL	0x00400008
+#define TXFIFO_THR_NORMAL2	0x01000008
+
+/* PLA_DMY_REG0 */
+#define ECM_ALDPS		0x0002
+
+/* PLA_FMC */
+#define FMC_FCR_MCU_EN		0x0001
+
+/* PLA_EEEP_CR */
+#define EEEP_CR_EEEP_TX		0x0002
+
+/* PLA_WDT6_CTRL */
+#define WDT6_SET_MODE		0x0010
+
+/* PLA_TCR0 */
+#define TCR0_TX_EMPTY		0x0800
+#define TCR0_AUTO_FIFO		0x0080
+
+/* PLA_TCR1 */
+#define VERSION_MASK		0x7cf0
+#define IFG_MASK		(BIT(3) | BIT(9) | BIT(8))
+#define IFG_144NS		BIT(9)
+#define IFG_96NS		(BIT(9) | BIT(8))
+
+/* PLA_MTPS */
+#define MTPS_JUMBO		(12 * 1024 / 64)
+#define MTPS_DEFAULT		(6 * 1024 / 64)
+
+/* PLA_RSTTALLY */
+#define TALLY_RESET		0x0001
+
+/* PLA_CR */
+#define CR_RST			0x10
+#define CR_RE			0x08
+#define CR_TE			0x04
+
+/* PLA_CRWECR */
+#define CRWECR_NORAML		0x00
+#define CRWECR_CONFIG		0xc0
+
+/* PLA_OOB_CTRL */
+#define NOW_IS_OOB		0x80
+#define TXFIFO_EMPTY		0x20
+#define RXFIFO_EMPTY		0x10
+#define LINK_LIST_READY		0x02
+#define DIS_MCU_CLROOB		0x01
+#define FIFO_EMPTY		(TXFIFO_EMPTY | RXFIFO_EMPTY)
+
+/* PLA_MISC_1 */
+#define RXDY_GATED_EN		0x0008
+
+/* PLA_SFF_STS_7 */
+#define RE_INIT_LL		0x8000
+#define MCU_BORW_EN		0x4000
+
+/* PLA_CPCR */
+#define FLOW_CTRL_EN		BIT(0)
+#define CPCR_RX_VLAN		0x0040
+
+/* PLA_CFG_WOL */
+#define MAGIC_EN		0x0001
+
+/* PLA_TEREDO_CFG */
+#define TEREDO_SEL		0x8000
+#define TEREDO_WAKE_MASK	0x7f00
+#define TEREDO_RS_EVENT_MASK	0x00fe
+#define OOB_TEREDO_EN		0x0001
+
+/* PLA_BDC_CR */
+#define ALDPS_PROXY_MODE	0x0001
+
+/* PLA_EFUSE_CMD */
+#define EFUSE_READ_CMD		BIT(15)
+#define EFUSE_DATA_BIT16	BIT(7)
+
+/* PLA_CONFIG34 */
+#define LINK_ON_WAKE_EN		0x0010
+#define LINK_OFF_WAKE_EN	0x0008
+
+/* PLA_CONFIG6 */
+#define LANWAKE_CLR_EN		BIT(0)
+
+/* PLA_USB_CFG */
+#define EN_XG_LIP		BIT(1)
+#define EN_G_LIP		BIT(2)
+
+/* PLA_CONFIG5 */
+#define BWF_EN			0x0040
+#define MWF_EN			0x0020
+#define UWF_EN			0x0010
+#define LAN_WAKE_EN		0x0002
+
+/* PLA_LED_FEATURE */
+#define LED_MODE_MASK		0x0700
+
+/* PLA_PHY_PWR */
+#define TX_10M_IDLE_EN		0x0080
+#define PFM_PWM_SWITCH		0x0040
+#define TEST_IO_OFF		BIT(4)
+
+/* PLA_MAC_PWR_CTRL */
+#define D3_CLK_GATED_EN		0x00004000
+#define MCU_CLK_RATIO		0x07010f07
+#define MCU_CLK_RATIO_MASK	0x0f0f0f0f
+#define ALDPS_SPDWN_RATIO	0x0f87
+
+/* PLA_MAC_PWR_CTRL2 */
+#define EEE_SPDWN_RATIO		0x8007
+#define MAC_CLK_SPDWN_EN	BIT(15)
+#define EEE_SPDWN_RATIO_MASK	0xff
+
+/* PLA_MAC_PWR_CTRL3 */
+#define PLA_MCU_SPDWN_EN	BIT(14)
+#define PKT_AVAIL_SPDWN_EN	0x0100
+#define SUSPEND_SPDWN_EN	0x0004
+#define U1U2_SPDWN_EN		0x0002
+#define L1_SPDWN_EN		0x0001
+
+/* PLA_MAC_PWR_CTRL4 */
+#define PWRSAVE_SPDWN_EN	0x1000
+#define RXDV_SPDWN_EN		0x0800
+#define TX10MIDLE_EN		0x0100
+#define IDLE_SPDWN_EN		BIT(6)
+#define TP100_SPDWN_EN		0x0020
+#define TP500_SPDWN_EN		0x0010
+#define TP1000_SPDWN_EN		0x0008
+#define EEE_SPDWN_EN		0x0001
+
+/* PLA_GPHY_INTR_IMR */
+#define GPHY_STS_MSK		0x0001
+#define SPEED_DOWN_MSK		0x0002
+#define SPDWN_RXDV_MSK		0x0004
+#define SPDWN_LINKCHG_MSK	0x0008
+
+/* PLA_PHYAR */
+#define PHYAR_FLAG		0x80000000
+
+/* PLA_EEE_CR */
+#define EEE_RX_EN		0x0001
+#define EEE_TX_EN		0x0002
+
+/* PLA_BOOT_CTRL */
+#define AUTOLOAD_DONE		0x0002
+
+/* PLA_LWAKE_CTRL_REG */
+#define LANWAKE_PIN		BIT(7)
+
+/* PLA_SUSPEND_FLAG */
+#define LINK_CHG_EVENT		BIT(0)
+
+/* PLA_INDICATE_FALG */
+#define UPCOMING_RUNTIME_D3	BIT(0)
+
+/* PLA_MACDBG_PRE and PLA_MACDBG_POST */
+#define DEBUG_OE		BIT(0)
+#define DEBUG_LTSSM		0x0082
+
+/* PLA_EXTRA_STATUS */
+#define CUR_LINK_OK		BIT(15)
+#define U3P3_CHECK_EN		BIT(7)	/* RTL_VER_05 only */
+#define LINK_CHANGE_FLAG	BIT(8)
+#define POLL_LINK_CHG		BIT(0)
+
+/* PLA_GPHY_CTRL */
+#define GPHY_FLASH		BIT(1)
+
+/* PLA_POL_GPIO_CTRL */
+#define DACK_DET_EN		BIT(15)
+#define POL_GPHY_PATCH		BIT(4)
+
+/* USB_USB2PHY */
+#define USB2PHY_SUSPEND		0x0001
+#define USB2PHY_L1		0x0002
+
+/* USB_SSPHYLINK1 */
+#define DELAY_PHY_PWR_CHG	BIT(1)
+
+/* USB_SSPHYLINK2 */
+#define pwd_dn_scale_mask	0x3ffe
+#define pwd_dn_scale(x)		((x) << 1)
+
+/* USB_CSR_DUMMY1 */
+#define DYNAMIC_BURST		0x0001
+
+/* USB_CSR_DUMMY2 */
+#define EP4_FULL_FC		0x0001
+
+/* USB_DEV_STAT */
+#define STAT_SPEED_MASK		0x0006
+#define STAT_SPEED_HIGH		0x0000
+#define STAT_SPEED_FULL		0x0002
+
+/* USB_FW_FIX_EN0 */
+#define FW_FIX_SUSPEND		BIT(14)
+
+/* USB_FW_FIX_EN1 */
+#define FW_IP_RESET_EN		BIT(9)
+
+/* USB_LPM_CONFIG */
+#define LPM_U1U2_EN		BIT(0)
+
+/* USB_TX_AGG */
+#define TX_AGG_MAX_THRESHOLD	0x03
+
+/* USB_RX_BUF_TH */
+#define RX_THR_SUPPER		0x0c350180
+#define RX_THR_HIGH		0x7a120180
+#define RX_THR_SLOW		0xffff0180
+#define RX_THR_B		0x00010001
+
+/* USB_TX_DMA */
+#define TEST_MODE_DISABLE	0x00000001
+#define TX_SIZE_ADJUST1		0x00000100
+
+/* USB_BMU_RESET */
+#define BMU_RESET_EP_IN		0x01
+#define BMU_RESET_EP_OUT	0x02
+
+/* USB_BMU_CONFIG */
+#define ACT_ODMA		BIT(1)
+
+/* USB_UPT_RXDMA_OWN */
+#define OWN_UPDATE		BIT(0)
+#define OWN_CLEAR		BIT(1)
+
+/* USB_FW_TASK */
+#define FC_PATCH_TASK		BIT(1)
+
+/* USB_RX_AGGR_NUM */
+#define RX_AGGR_NUM_MASK	0x1ff
+
+/* USB_UPS_CTRL */
+#define POWER_CUT		0x0100
+
+/* USB_PM_CTRL_STATUS */
+#define RESUME_INDICATE		0x0001
+
+/* USB_ECM_OPTION */
+#define BYPASS_MAC_RESET	BIT(5)
+
+/* USB_CSTMR */
+#define FORCE_SUPER		BIT(0)
+
+/* USB_MISC_2 */
+#define UPS_FORCE_PWR_DOWN	BIT(0)
+
+/* USB_ECM_OP */
+#define	EN_ALL_SPEED		BIT(0)
+
+/* USB_GPHY_CTRL */
+#define GPHY_PATCH_DONE		BIT(2)
+#define BYPASS_FLASH		BIT(5)
+#define BACKUP_RESTRORE		BIT(6)
+
+/* USB_SPEED_OPTION */
+#define RG_PWRDN_EN		BIT(8)
+#define ALL_SPEED_OFF		BIT(9)
+
+/* USB_FW_CTRL */
+#define FLOW_CTRL_PATCH_OPT	BIT(1)
+#define AUTO_SPEEDUP		BIT(3)
+#define FLOW_CTRL_PATCH_2	BIT(8)
+
+/* USB_FC_TIMER */
+#define CTRL_TIMER_EN		BIT(15)
+
+/* USB_USB_CTRL */
+#define CDC_ECM_EN		BIT(3)
+#define RX_AGG_DISABLE		0x0010
+#define RX_ZERO_EN		0x0080
+
+/* USB_U2P3_CTRL */
+#define U2P3_ENABLE		0x0001
+#define RX_DETECT8		BIT(3)
+
+/* USB_POWER_CUT */
+#define PWR_EN			0x0001
+#define PHASE2_EN		0x0008
+#define UPS_EN			BIT(4)
+#define USP_PREWAKE		BIT(5)
+
+/* USB_MISC_0 */
+#define PCUT_STATUS		0x0001
+
+/* USB_RX_EARLY_TIMEOUT */
+#define COALESCE_SUPER		 85000U
+#define COALESCE_HIGH		250000U
+#define COALESCE_SLOW		524280U
+
+/* USB_WDT1_CTRL */
+#define WTD1_EN			BIT(0)
+
+/* USB_WDT11_CTRL */
+#define TIMER11_EN		0x0001
+
+/* USB_LPM_CTRL */
+/* bit 4 ~ 5: fifo empty boundary */
+#define FIFO_EMPTY_1FB		0x30	/* 0x1fb * 64 = 32448 bytes */
+/* bit 2 ~ 3: LMP timer */
+#define LPM_TIMER_MASK		0x0c
+#define LPM_TIMER_500MS		0x04	/* 500 ms */
+#define LPM_TIMER_500US		0x0c	/* 500 us */
+#define ROK_EXIT_LPM		0x02
+
+/* USB_AFE_CTRL2 */
+#define SEN_VAL_MASK		0xf800
+#define SEN_VAL_NORMAL		0xa000
+#define SEL_RXIDLE		0x0100
+
+/* USB_UPHY_XTAL */
+#define OOBS_POLLING		BIT(8)
+
+/* USB_UPS_CFG */
+#define SAW_CNT_1MS_MASK	0x0fff
+#define MID_REVERSE		BIT(5)	/* RTL8156A */
+
+/* USB_UPS_FLAGS */
+#define UPS_FLAGS_R_TUNE		BIT(0)
+#define UPS_FLAGS_EN_10M_CKDIV		BIT(1)
+#define UPS_FLAGS_250M_CKDIV		BIT(2)
+#define UPS_FLAGS_EN_ALDPS		BIT(3)
+#define UPS_FLAGS_CTAP_SHORT_DIS	BIT(4)
+#define UPS_FLAGS_SPEED_MASK		(0xf << 16)
+#define ups_flags_speed(x)		((x) << 16)
+#define UPS_FLAGS_EN_EEE		BIT(20)
+#define UPS_FLAGS_EN_500M_EEE		BIT(21)
+#define UPS_FLAGS_EN_EEE_CKDIV		BIT(22)
+#define UPS_FLAGS_EEE_PLLOFF_100	BIT(23)
+#define UPS_FLAGS_EEE_PLLOFF_GIGA	BIT(24)
+#define UPS_FLAGS_EEE_CMOD_LV_EN	BIT(25)
+#define UPS_FLAGS_EN_GREEN		BIT(26)
+#define UPS_FLAGS_EN_FLOW_CTR		BIT(27)
+
+enum spd_duplex {
+	NWAY_10M_HALF,
+	NWAY_10M_FULL,
+	NWAY_100M_HALF,
+	NWAY_100M_FULL,
+	NWAY_1000M_FULL,
+	FORCE_10M_HALF,
+	FORCE_10M_FULL,
+	FORCE_100M_HALF,
+	FORCE_100M_FULL,
+	FORCE_1000M_FULL,
+	NWAY_2500M_FULL,
+};
+
+/* OCP_ALDPS_CONFIG */
+#define ENPWRSAVE		0x8000
+#define ENPDNPS			0x0200
+#define LINKENA			0x0100
+#define DIS_SDSAVE		0x0010
+
+/* OCP_PHY_STATUS */
+#define PHY_STAT_MASK		0x0007
+#define PHY_STAT_EXT_INIT	2
+#define PHY_STAT_LAN_ON		3
+#define PHY_STAT_PWRDN		5
+
+/* OCP_INTR_EN */
+#define INTR_SPEED_FORCE	BIT(3)
+
+/* OCP_NCTL_CFG */
+#define PGA_RETURN_EN		BIT(1)
+
+/* OCP_POWER_CFG */
+#define EEE_CLKDIV_EN		0x8000
+#define EN_ALDPS		0x0004
+#define EN_10M_PLLOFF		0x0001
+
+/* OCP_EEE_CONFIG1 */
+#define RG_TXLPI_MSK_HFDUP	0x8000
+#define RG_MATCLR_EN		0x4000
+#define EEE_10_CAP		0x2000
+#define EEE_NWAY_EN		0x1000
+#define TX_QUIET_EN		0x0200
+#define RX_QUIET_EN		0x0100
+#define sd_rise_time_mask	0x0070
+#define sd_rise_time(x)		(min(x, 7) << 4)	/* bit 4 ~ 6 */
+#define RG_RXLPI_MSK_HFDUP	0x0008
+#define SDFALLTIME		0x0007	/* bit 0 ~ 2 */
+
+/* OCP_EEE_CONFIG2 */
+#define RG_LPIHYS_NUM		0x7000	/* bit 12 ~ 15 */
+#define RG_DACQUIET_EN		0x0400
+#define RG_LDVQUIET_EN		0x0200
+#define RG_CKRSEL		0x0020
+#define RG_EEEPRG_EN		0x0010
+
+/* OCP_EEE_CONFIG3 */
+#define fast_snr_mask		0xff80
+#define fast_snr(x)		(min(x, 0x1ff) << 7)	/* bit 7 ~ 15 */
+#define RG_LFS_SEL		0x0060	/* bit 6 ~ 5 */
+#define MSK_PH			0x0006	/* bit 0 ~ 3 */
+
+/* OCP_EEE_AR */
+/* bit[15:14] function */
+#define FUN_ADDR		0x0000
+#define FUN_DATA		0x4000
+/* bit[4:0] device addr */
+
+/* OCP_EEE_CFG */
+#define CTAP_SHORT_EN		0x0040
+#define EEE10_EN		0x0010
+
+/* OCP_DOWN_SPEED */
+#define EN_EEE_CMODE		BIT(14)
+#define EN_EEE_1000		BIT(13)
+#define EN_EEE_100		BIT(12)
+#define EN_10M_CLKDIV		BIT(11)
+#define EN_10M_BGOFF		0x0080
+
+/* OCP_10GBT_CTRL */
+#define RTL_ADV2_5G_F_R		BIT(5)	/* Advertise 2.5GBASE-T fast-retrain */
+
+/* OCP_PHY_STATE */
+#define TXDIS_STATE		0x01
+#define ABD_STATE		0x02
+
+/* OCP_PHY_PATCH_STAT */
+#define PATCH_READY		BIT(6)
+
+/* OCP_PHY_PATCH_CMD */
+#define PATCH_REQUEST		BIT(4)
+
+/* OCP_PHY_LOCK */
+#define PATCH_LOCK		BIT(0)
+
+/* OCP_ADC_CFG */
+#define CKADSEL_L		0x0100
+#define ADC_EN			0x0080
+#define EN_EMI_L		0x0040
+
+/* OCP_SYSCLK_CFG */
+#define sysclk_div_expo(x)	(min(x, 5) << 8)
+#define clk_div_expo(x)		(min(x, 5) << 4)
+
+/* SRAM_GREEN_CFG */
+#define GREEN_ETH_EN		BIT(15)
+#define R_TUNE_EN		BIT(11)
+
+/* SRAM_LPF_CFG */
+#define LPF_AUTO_TUNE		0x8000
+
+/* SRAM_10M_AMP1 */
+#define GDAC_IB_UPALL		0x0008
+
+/* SRAM_10M_AMP2 */
+#define AMP_DN			0x0200
+
+/* SRAM_IMPEDANCE */
+#define RX_DRIVING_MASK		0x6000
+
+/* SRAM_PHY_LOCK */
+#define PHY_PATCH_LOCK		0x0001
+
+/* MAC PASSTHRU */
+#define AD_MASK			0xfee0
+#define BND_MASK		0x0004
+#define BD_MASK			0x0001
+#define EFUSE			0xcfdb
+#define PASS_THRU_MASK		0x1
+
+#define BP4_SUPER_ONLY		0x1578	/* RTL_VER_04 only */
+
+enum rtl_register_content {
+	_2500bps	= BIT(10),
+	_1250bps	= BIT(9),
+	_500bps		= BIT(8),
+	_tx_flow	= BIT(6),
+	_rx_flow	= BIT(5),
+	_1000bps	= 0x10,
+	_100bps		= 0x08,
+	_10bps		= 0x04,
+	LINK_STATUS	= 0x02,
+	FULL_DUP	= 0x01,
+};
+
+#define is_speed_2500(_speed)	(((_speed) & (_2500bps | LINK_STATUS)) == (_2500bps | LINK_STATUS))
+#define is_flow_control(_speed)	(((_speed) & (_tx_flow | _rx_flow)) == (_tx_flow | _rx_flow))
+
+#define RTL8152_MAX_TX		4
+#define RTL8152_MAX_RX		10
+#define INTBUFSIZE		2
+#define TX_ALIGN		4
+#define RX_ALIGN		8
+
+#define RTL8152_RX_MAX_PENDING	4096
+#define RTL8152_RXFG_HEADSZ	256
+
+#define INTR_LINK		0x0004
+
+#define RTL8152_RMS		(VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
+#define RTL8153_RMS		RTL8153_MAX_PACKET
+#define RTL8152_TX_TIMEOUT	(5 * HZ)
+#define mtu_to_size(m)		((m) + VLAN_ETH_HLEN + ETH_FCS_LEN)
+#define size_to_mtu(s)		((s) - VLAN_ETH_HLEN - ETH_FCS_LEN)
+#define rx_reserved_size(x)	(mtu_to_size(x) + sizeof(struct rx_desc) + RX_ALIGN)
+
+/* rtl8152 flags */
+enum rtl8152_flags {
+	RTL8152_INACCESSIBLE = 0,
+	RTL8152_SET_RX_MODE,
+	WORK_ENABLE,
+	RTL8152_LINK_CHG,
+	SELECTIVE_SUSPEND,
+	PHY_RESET,
+	SCHEDULE_TASKLET,
+	GREEN_ETHERNET,
+	RX_EPROTO,
+};
+
+#define DEVICE_ID_LENOVO_USB_C_TRAVEL_HUB		0x721e
+#define DEVICE_ID_THINKPAD_ONELINK_PLUS_DOCK		0x3054
+#define DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2	0x3082
+#define DEVICE_ID_THINKPAD_USB_C_DONGLE			0x720c
+#define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2		0xa387
+#define DEVICE_ID_THINKPAD_USB_C_DOCK_GEN3		0x3062
+
+struct tally_counter {
+	__le64	tx_packets;
+	__le64	rx_packets;
+	__le64	tx_errors;
+	__le32	rx_errors;
+	__le16	rx_missed;
+	__le16	align_errors;
+	__le32	tx_one_collision;
+	__le32	tx_multi_collision;
+	__le64	rx_unicast;
+	__le64	rx_broadcast;
+	__le32	rx_multicast;
+	__le16	tx_aborted;
+	__le16	tx_underrun;
+};
+
+struct rx_desc {
+	__le32 opts1;
+#define RX_LEN_MASK			0x7fff
+
+	__le32 opts2;
+#define RD_UDP_CS			BIT(23)
+#define RD_TCP_CS			BIT(22)
+#define RD_IPV6_CS			BIT(20)
+#define RD_IPV4_CS			BIT(19)
+
+	__le32 opts3;
+#define IPF				BIT(23) /* IP checksum fail */
+#define UDPF				BIT(22) /* UDP checksum fail */
+#define TCPF				BIT(21) /* TCP checksum fail */
+#define RX_VLAN_TAG			BIT(16)
+
+	__le32 opts4;
+	__le32 opts5;
+	__le32 opts6;
+};
+
+struct tx_desc {
+	__le32 opts1;
+#define TX_FS			BIT(31) /* First segment of a packet */
+#define TX_LS			BIT(30) /* Final segment of a packet */
+#define GTSENDV4		BIT(28)
+#define GTSENDV6		BIT(27)
+#define GTTCPHO_SHIFT		18
+#define GTTCPHO_MAX		0x7fU
+#define TX_LEN_MAX		0x3ffffU
+
+	__le32 opts2;
+#define UDP_CS			BIT(31) /* Calculate UDP/IP checksum */
+#define TCP_CS			BIT(30) /* Calculate TCP/IP checksum */
+#define IPV4_CS			BIT(29) /* Calculate IPv4 checksum */
+#define IPV6_CS			BIT(28) /* Calculate IPv6 checksum */
+#define MSS_SHIFT		17
+#define MSS_MAX			0x7ffU
+#define TCPHO_SHIFT		17
+#define TCPHO_MAX		0x7ffU
+#define TX_VLAN_TAG		BIT(16)
+};
+
+struct r8152;
+
+struct rx_agg {
+	struct list_head list, info_list;
+	struct urb *urb;
+	struct r8152 *context;
+	struct page *page;
+	void *buffer;
+};
+
+struct tx_agg {
+	struct list_head list;
+	struct urb *urb;
+	struct r8152 *context;
+	void *buffer;
+	void *head;
+	u32 skb_num;
+	u32 skb_len;
+};
+
+struct r8152 {
+	unsigned long flags;
+	struct usb_device *udev;
+	struct napi_struct napi;
+	struct usb_interface *intf;
+	struct net_device *netdev;
+	struct urb *intr_urb;
+	struct tx_agg tx_info[RTL8152_MAX_TX];
+	struct list_head rx_info, rx_used;
+	struct list_head rx_done, tx_free;
+	struct sk_buff_head tx_queue, rx_queue;
+	spinlock_t rx_lock, tx_lock;
+	struct delayed_work schedule, hw_phy_work;
+	struct mii_if_info mii;
+	struct mutex control;	/* use for hw setting */
+#ifdef CONFIG_PM_SLEEP
+	struct notifier_block pm_notifier;
+#endif
+	struct tasklet_struct tx_tl;
+
+	struct rtl_ops {
+		void (*init)(struct r8152 *tp);
+		int (*enable)(struct r8152 *tp);
+		void (*disable)(struct r8152 *tp);
+		void (*up)(struct r8152 *tp);
+		void (*down)(struct r8152 *tp);
+		void (*unload)(struct r8152 *tp);
+		int (*eee_get)(struct r8152 *tp, struct ethtool_eee *eee);
+		int (*eee_set)(struct r8152 *tp, struct ethtool_eee *eee);
+		bool (*in_nway)(struct r8152 *tp);
+		void (*hw_phy_cfg)(struct r8152 *tp);
+		void (*autosuspend_en)(struct r8152 *tp, bool enable);
+		void (*change_mtu)(struct r8152 *tp);
+	} rtl_ops;
+
+	struct ups_info {
+		u32 r_tune:1;
+		u32 _10m_ckdiv:1;
+		u32 _250m_ckdiv:1;
+		u32 aldps:1;
+		u32 lite_mode:2;
+		u32 speed_duplex:4;
+		u32 eee:1;
+		u32 eee_lite:1;
+		u32 eee_ckdiv:1;
+		u32 eee_plloff_100:1;
+		u32 eee_plloff_giga:1;
+		u32 eee_cmod_lv:1;
+		u32 green:1;
+		u32 flow_control:1;
+		u32 ctap_short_off:1;
+	} ups_info;
+
+#define RTL_VER_SIZE		32
+
+	struct rtl_fw {
+		const char *fw_name;
+		const struct firmware *fw;
+
+		char version[RTL_VER_SIZE];
+		int (*pre_fw)(struct r8152 *tp);
+		int (*post_fw)(struct r8152 *tp);
+
+		bool retry;
+	} rtl_fw;
+
+	atomic_t rx_count;
+
+	bool eee_en;
+	int intr_interval;
+	u32 saved_wolopts;
+	u32 msg_enable;
+	u32 tx_qlen;
+	u32 coalesce;
+	u32 advertising;
+	u32 rx_buf_sz;
+	u32 rx_copybreak;
+	u32 rx_pending;
+	u32 fc_pause_on, fc_pause_off;
+
+	unsigned int pipe_in, pipe_out, pipe_intr, pipe_ctrl_in, pipe_ctrl_out;
+
+	u32 support_2500full:1;
+	u32 lenovo_macpassthru:1;
+	u32 dell_tb_rx_agg_bug:1;
+	u16 ocp_base;
+	u16 speed;
+	u16 eee_adv;
+	u8 *intr_buff;
+	u8 version;
+	u8 duplex;
+	u8 autoneg;
+};
+
+/**
+ * struct fw_block - block type and total length
+ * @type: type of the current block, such as RTL_FW_END, RTL_FW_PLA,
+ *	RTL_FW_USB and so on.
+ * @length: total length of the current block.
+ */
+struct fw_block {
+	__le32 type;
+	__le32 length;
+} __packed;
+
+/**
+ * struct fw_header - header of the firmware file
+ * @checksum: checksum of sha256 which is calculated from the whole file
+ *	except the checksum field of the file. That is, calculate sha256
+ *	from the version field to the end of the file.
+ * @version: version of this firmware.
+ * @blocks: the first firmware block of the file
+ */
+struct fw_header {
+	u8 checksum[32];
+	char version[RTL_VER_SIZE];
+	struct fw_block blocks[];
+} __packed;
+
+enum rtl8152_fw_flags {
+	FW_FLAGS_USB = 0,
+	FW_FLAGS_PLA,
+	FW_FLAGS_START,
+	FW_FLAGS_STOP,
+	FW_FLAGS_NC,
+	FW_FLAGS_NC1,
+	FW_FLAGS_NC2,
+	FW_FLAGS_UC2,
+	FW_FLAGS_UC,
+	FW_FLAGS_SPEED_UP,
+	FW_FLAGS_VER,
+};
+
+enum rtl8152_fw_fixup_cmd {
+	FW_FIXUP_AND = 0,
+	FW_FIXUP_OR,
+	FW_FIXUP_NOT,
+	FW_FIXUP_XOR,
+};
+
+struct fw_phy_set {
+	__le16 addr;
+	__le16 data;
+} __packed;
+
+struct fw_phy_speed_up {
+	struct fw_block blk_hdr;
+	__le16 fw_offset;
+	__le16 version;
+	__le16 fw_reg;
+	__le16 reserved;
+	char info[];
+} __packed;
+
+struct fw_phy_ver {
+	struct fw_block blk_hdr;
+	struct fw_phy_set ver;
+	__le32 reserved;
+} __packed;
+
+struct fw_phy_fixup {
+	struct fw_block blk_hdr;
+	struct fw_phy_set setting;
+	__le16 bit_cmd;
+	__le16 reserved;
+} __packed;
+
+struct fw_phy_union {
+	struct fw_block blk_hdr;
+	__le16 fw_offset;
+	__le16 fw_reg;
+	struct fw_phy_set pre_set[2];
+	struct fw_phy_set bp[8];
+	struct fw_phy_set bp_en;
+	u8 pre_num;
+	u8 bp_num;
+	char info[];
+} __packed;
+
+/**
+ * struct fw_mac - a firmware block used by RTL_FW_PLA and RTL_FW_USB.
+ *	The layout of the firmware block is:
+ *	<struct fw_mac> + <info> + <firmware data>.
+ * @blk_hdr: firmware descriptor (type, length)
+ * @fw_offset: offset of the firmware binary data. The start address of
+ *	the data would be the address of struct fw_mac + @fw_offset.
+ * @fw_reg: the register to load the firmware. Depends on chip.
+ * @bp_ba_addr: the register to write break point base address. Depends on
+ *	chip.
+ * @bp_ba_value: break point base address. Depends on chip.
+ * @bp_en_addr: the register to write break point enabled mask. Depends
+ *	on chip.
+ * @bp_en_value: break point enabled mask. Depends on the firmware.
+ * @bp_start: the start register of break points. Depends on chip.
+ * @bp_num: the break point number which needs to be set for this firmware.
+ *	Depends on the firmware.
+ * @bp: break points. Depends on firmware.
+ * @reserved: reserved space (unused)
+ * @fw_ver_reg: the register to store the fw version.
+ * @fw_ver_data: the firmware version of the current type.
+ * @info: additional information for debugging, and is followed by the
+ *	binary data of firmware.
+ */
+struct fw_mac {
+	struct fw_block blk_hdr;
+	__le16 fw_offset;
+	__le16 fw_reg;
+	__le16 bp_ba_addr;
+	__le16 bp_ba_value;
+	__le16 bp_en_addr;
+	__le16 bp_en_value;
+	__le16 bp_start;
+	__le16 bp_num;
+	__le16 bp[16]; /* any value determined by firmware */
+	__le32 reserved;
+	__le16 fw_ver_reg;
+	u8 fw_ver_data;
+	char info[];
+} __packed;
+
+/**
+ * struct fw_phy_patch_key - a firmware block used by RTL_FW_PHY_START.
+ *	This is used to set patch key when loading the firmware of PHY.
+ * @blk_hdr: firmware descriptor (type, length)
+ * @key_reg: the register to write the patch key.
+ * @key_data: patch key.
+ * @reserved: reserved space (unused)
+ */
+struct fw_phy_patch_key {
+	struct fw_block blk_hdr;
+	__le16 key_reg;
+	__le16 key_data;
+	__le32 reserved;
+} __packed;
+
+/**
+ * struct fw_phy_nc - a firmware block used by RTL_FW_PHY_NC.
+ *	The layout of the firmware block is:
+ *	<struct fw_phy_nc> + <info> + <firmware data>.
+ * @blk_hdr: firmware descriptor (type, length)
+ * @fw_offset: offset of the firmware binary data. The start address of
+ *	the data would be the address of struct fw_phy_nc + @fw_offset.
+ * @fw_reg: the register to load the firmware. Depends on chip.
+ * @ba_reg: the register to write the base address. Depends on chip.
+ * @ba_data: base address. Depends on chip.
+ * @patch_en_addr: the register of enabling patch mode. Depends on chip.
+ * @patch_en_value: patch mode enabled mask. Depends on the firmware.
+ * @mode_reg: the regitster of switching the mode.
+ * @mode_pre: the mode needing to be set before loading the firmware.
+ * @mode_post: the mode to be set when finishing to load the firmware.
+ * @reserved: reserved space (unused)
+ * @bp_start: the start register of break points. Depends on chip.
+ * @bp_num: the break point number which needs to be set for this firmware.
+ *	Depends on the firmware.
+ * @bp: break points. Depends on firmware.
+ * @info: additional information for debugging, and is followed by the
+ *	binary data of firmware.
+ */
+struct fw_phy_nc {
+	struct fw_block blk_hdr;
+	__le16 fw_offset;
+	__le16 fw_reg;
+	__le16 ba_reg;
+	__le16 ba_data;
+	__le16 patch_en_addr;
+	__le16 patch_en_value;
+	__le16 mode_reg;
+	__le16 mode_pre;
+	__le16 mode_post;
+	__le16 reserved;
+	__le16 bp_start;
+	__le16 bp_num;
+	__le16 bp[4];
+	char info[];
+} __packed;
+
+enum rtl_fw_type {
+	RTL_FW_END = 0,
+	RTL_FW_PLA,
+	RTL_FW_USB,
+	RTL_FW_PHY_START,
+	RTL_FW_PHY_STOP,
+	RTL_FW_PHY_NC,
+	RTL_FW_PHY_FIXUP,
+	RTL_FW_PHY_UNION_NC,
+	RTL_FW_PHY_UNION_NC1,
+	RTL_FW_PHY_UNION_NC2,
+	RTL_FW_PHY_UNION_UC2,
+	RTL_FW_PHY_UNION_UC,
+	RTL_FW_PHY_UNION_MISC,
+	RTL_FW_PHY_SPEED_UP,
+	RTL_FW_PHY_VER,
+};
+
+enum rtl_version {
+	RTL_VER_UNKNOWN = 0,
+	RTL_VER_01,
+	RTL_VER_02,
+	RTL_VER_03,
+	RTL_VER_04,
+	RTL_VER_05,
+	RTL_VER_06,
+	RTL_VER_07,
+	RTL_VER_08,
+	RTL_VER_09,
+
+	RTL_TEST_01,
+	RTL_VER_10,
+	RTL_VER_11,
+	RTL_VER_12,
+	RTL_VER_13,
+	RTL_VER_14,
+	RTL_VER_15,
+
+	RTL_VER_MAX
+};
+
+enum tx_csum_stat {
+	TX_CSUM_SUCCESS = 0,
+	TX_CSUM_TSO,
+	TX_CSUM_NONE
+};
+
+#define RTL_ADVERTISED_10_HALF			BIT(0)
+#define RTL_ADVERTISED_10_FULL			BIT(1)
+#define RTL_ADVERTISED_100_HALF			BIT(2)
+#define RTL_ADVERTISED_100_FULL			BIT(3)
+#define RTL_ADVERTISED_1000_HALF		BIT(4)
+#define RTL_ADVERTISED_1000_FULL		BIT(5)
+#define RTL_ADVERTISED_2500_FULL		BIT(6)
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ * The RTL chips use a 64 element hash table based on the Ethernet CRC.
+ */
+static const int multicast_filter_limit = 32;
+static unsigned int agg_buf_sz = 16384;
+
+#define RTL_LIMITED_TSO_SIZE	(size_to_mtu(agg_buf_sz) - sizeof(struct tx_desc))
+
+static
+int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
+{
+	int ret;
+	void *tmp;
+
+	tmp = kmalloc(size, GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	ret = usb_control_msg(tp->udev, tp->pipe_ctrl_in,
+			      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
+			      value, index, tmp, size, USB_CTRL_GET_TIMEOUT);
+	if (ret < 0)
+		memset(data, 0xff, size);
+	else
+		memcpy(data, tmp, size);
+
+	kfree(tmp);
+
+	return ret;
+}
+
+static
+int set_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
+{
+	int ret;
+	void *tmp;
+
+	tmp = kmemdup(data, size, GFP_KERNEL);
+	if (!tmp)
+		return -ENOMEM;
+
+	ret = usb_control_msg(tp->udev, tp->pipe_ctrl_out,
+			      RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE,
+			      value, index, tmp, size, USB_CTRL_SET_TIMEOUT);
+
+	kfree(tmp);
+
+	return ret;
+}
+
+static void rtl_set_unplug(struct r8152 *tp)
+{
+	if (tp->udev->state == USB_STATE_NOTATTACHED) {
+		set_bit(RTL8152_INACCESSIBLE, &tp->flags);
+		smp_mb__after_atomic();
+	}
+}
+
+static int generic_ocp_read(struct r8152 *tp, u16 index, u16 size,
+			    void *data, u16 type)
+{
+	u16 limit = 64;
+	int ret = 0;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return -ENODEV;
+
+	/* both size and indix must be 4 bytes align */
+	if ((size & 3) || !size || (index & 3) || !data)
+		return -EPERM;
+
+	if ((u32)index + (u32)size > 0xffff)
+		return -EPERM;
+
+	while (size) {
+		if (size > limit) {
+			ret = get_registers(tp, index, type, limit, data);
+			if (ret < 0)
+				break;
+
+			index += limit;
+			data += limit;
+			size -= limit;
+		} else {
+			ret = get_registers(tp, index, type, size, data);
+			if (ret < 0)
+				break;
+
+			index += size;
+			data += size;
+			size = 0;
+			break;
+		}
+	}
+
+	if (ret == -ENODEV)
+		rtl_set_unplug(tp);
+
+	return ret;
+}
+
+static int generic_ocp_write(struct r8152 *tp, u16 index, u16 byteen,
+			     u16 size, void *data, u16 type)
+{
+	int ret;
+	u16 byteen_start, byteen_end, byen;
+	u16 limit = 512;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return -ENODEV;
+
+	/* both size and indix must be 4 bytes align */
+	if ((size & 3) || !size || (index & 3) || !data)
+		return -EPERM;
+
+	if ((u32)index + (u32)size > 0xffff)
+		return -EPERM;
+
+	byteen_start = byteen & BYTE_EN_START_MASK;
+	byteen_end = byteen & BYTE_EN_END_MASK;
+
+	byen = byteen_start | (byteen_start << 4);
+	ret = set_registers(tp, index, type | byen, 4, data);
+	if (ret < 0)
+		goto error1;
+
+	index += 4;
+	data += 4;
+	size -= 4;
+
+	if (size) {
+		size -= 4;
+
+		while (size) {
+			if (size > limit) {
+				ret = set_registers(tp, index,
+						    type | BYTE_EN_DWORD,
+						    limit, data);
+				if (ret < 0)
+					goto error1;
+
+				index += limit;
+				data += limit;
+				size -= limit;
+			} else {
+				ret = set_registers(tp, index,
+						    type | BYTE_EN_DWORD,
+						    size, data);
+				if (ret < 0)
+					goto error1;
+
+				index += size;
+				data += size;
+				size = 0;
+				break;
+			}
+		}
+
+		byen = byteen_end | (byteen_end >> 4);
+		ret = set_registers(tp, index, type | byen, 4, data);
+		if (ret < 0)
+			goto error1;
+	}
+
+error1:
+	if (ret == -ENODEV)
+		rtl_set_unplug(tp);
+
+	return ret;
+}
+
+static inline
+int pla_ocp_read(struct r8152 *tp, u16 index, u16 size, void *data)
+{
+	return generic_ocp_read(tp, index, size, data, MCU_TYPE_PLA);
+}
+
+static inline
+int pla_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
+{
+	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_PLA);
+}
+
+static inline
+int usb_ocp_write(struct r8152 *tp, u16 index, u16 byteen, u16 size, void *data)
+{
+	return generic_ocp_write(tp, index, byteen, size, data, MCU_TYPE_USB);
+}
+
+static u32 ocp_read_dword(struct r8152 *tp, u16 type, u16 index)
+{
+	__le32 data;
+
+	generic_ocp_read(tp, index, sizeof(data), &data, type);
+
+	return __le32_to_cpu(data);
+}
+
+static void ocp_write_dword(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	__le32 tmp = __cpu_to_le32(data);
+
+	generic_ocp_write(tp, index, BYTE_EN_DWORD, sizeof(tmp), &tmp, type);
+}
+
+static u16 ocp_read_word(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+	__le32 tmp;
+	u16 byen = BYTE_EN_WORD;
+	u8 shift = index & 2;
+
+	index &= ~3;
+	byen <<= shift;
+
+	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type | byen);
+
+	data = __le32_to_cpu(tmp);
+	data >>= (shift * 8);
+	data &= 0xffff;
+
+	return (u16)data;
+}
+
+static void ocp_write_word(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	u32 mask = 0xffff;
+	__le32 tmp;
+	u16 byen = BYTE_EN_WORD;
+	u8 shift = index & 2;
+
+	data &= mask;
+
+	if (index & 2) {
+		byen <<= shift;
+		mask <<= (shift * 8);
+		data <<= (shift * 8);
+		index &= ~3;
+	}
+
+	tmp = __cpu_to_le32(data);
+
+	generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
+}
+
+static u8 ocp_read_byte(struct r8152 *tp, u16 type, u16 index)
+{
+	u32 data;
+	__le32 tmp;
+	u8 shift = index & 3;
+
+	index &= ~3;
+
+	generic_ocp_read(tp, index, sizeof(tmp), &tmp, type);
+
+	data = __le32_to_cpu(tmp);
+	data >>= (shift * 8);
+	data &= 0xff;
+
+	return (u8)data;
+}
+
+static void ocp_write_byte(struct r8152 *tp, u16 type, u16 index, u32 data)
+{
+	u32 mask = 0xff;
+	__le32 tmp;
+	u16 byen = BYTE_EN_BYTE;
+	u8 shift = index & 3;
+
+	data &= mask;
+
+	if (index & 3) {
+		byen <<= shift;
+		mask <<= (shift * 8);
+		data <<= (shift * 8);
+		index &= ~3;
+	}
+
+	tmp = __cpu_to_le32(data);
+
+	generic_ocp_write(tp, index, byen, sizeof(tmp), &tmp, type);
+}
+
+static u16 ocp_reg_read(struct r8152 *tp, u16 addr)
+{
+	u16 ocp_base, ocp_index;
+
+	ocp_base = addr & 0xf000;
+	if (ocp_base != tp->ocp_base) {
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+		tp->ocp_base = ocp_base;
+	}
+
+	ocp_index = (addr & 0x0fff) | 0xb000;
+	return ocp_read_word(tp, MCU_TYPE_PLA, ocp_index);
+}
+
+static void ocp_reg_write(struct r8152 *tp, u16 addr, u16 data)
+{
+	u16 ocp_base, ocp_index;
+
+	ocp_base = addr & 0xf000;
+	if (ocp_base != tp->ocp_base) {
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, ocp_base);
+		tp->ocp_base = ocp_base;
+	}
+
+	ocp_index = (addr & 0x0fff) | 0xb000;
+	ocp_write_word(tp, MCU_TYPE_PLA, ocp_index, data);
+}
+
+static inline void r8152_mdio_write(struct r8152 *tp, u32 reg_addr, u32 value)
+{
+	ocp_reg_write(tp, OCP_BASE_MII + reg_addr * 2, value);
+}
+
+static inline int r8152_mdio_read(struct r8152 *tp, u32 reg_addr)
+{
+	return ocp_reg_read(tp, OCP_BASE_MII + reg_addr * 2);
+}
+
+static void sram_write(struct r8152 *tp, u16 addr, u16 data)
+{
+	ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
+	ocp_reg_write(tp, OCP_SRAM_DATA, data);
+}
+
+static u16 sram_read(struct r8152 *tp, u16 addr)
+{
+	ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
+	return ocp_reg_read(tp, OCP_SRAM_DATA);
+}
+
+static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int ret;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return -ENODEV;
+
+	if (phy_id != R8152_PHY_ID)
+		return -EINVAL;
+
+	ret = r8152_mdio_read(tp, reg);
+
+	return ret;
+}
+
+static
+void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	if (phy_id != R8152_PHY_ID)
+		return;
+
+	r8152_mdio_write(tp, reg, val);
+}
+
+static int
+r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
+
+static int
+rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
+		  u32 advertising);
+
+static int __rtl8152_set_mac_address(struct net_device *netdev, void *p,
+				     bool in_resume)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+	int ret = -EADDRNOTAVAIL;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		goto out1;
+
+	if (!in_resume) {
+		ret = usb_autopm_get_interface(tp->intf);
+		if (ret < 0)
+			goto out1;
+	}
+
+	mutex_lock(&tp->control);
+
+	eth_hw_addr_set(netdev, addr->sa_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+	pla_ocp_write(tp, PLA_IDR, BYTE_EN_SIX_BYTES, 8, addr->sa_data);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+
+	mutex_unlock(&tp->control);
+
+	if (!in_resume)
+		usb_autopm_put_interface(tp->intf);
+out1:
+	return ret;
+}
+
+static int rtl8152_set_mac_address(struct net_device *netdev, void *p)
+{
+	return __rtl8152_set_mac_address(netdev, p, false);
+}
+
+/* Devices containing proper chips can support a persistent
+ * host system provided MAC address.
+ * Examples of this are Dell TB15 and Dell WD15 docks
+ */
+static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	int ret = -EINVAL;
+	u32 ocp_data;
+	unsigned char buf[6];
+	char *mac_obj_name;
+	acpi_object_type mac_obj_type;
+	int mac_strlen;
+
+	if (tp->lenovo_macpassthru) {
+		mac_obj_name = "\\MACA";
+		mac_obj_type = ACPI_TYPE_STRING;
+		mac_strlen = 0x16;
+	} else {
+		/* test for -AD variant of RTL8153 */
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+		if ((ocp_data & AD_MASK) == 0x1000) {
+			/* test for MAC address pass-through bit */
+			ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+			if ((ocp_data & PASS_THRU_MASK) != 1) {
+				netif_dbg(tp, probe, tp->netdev,
+						"No efuse for RTL8153-AD MAC pass through\n");
+				return -ENODEV;
+			}
+		} else {
+			/* test for RTL8153-BND and RTL8153-BD */
+			ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+			if ((ocp_data & BND_MASK) == 0 && (ocp_data & BD_MASK) == 0) {
+				netif_dbg(tp, probe, tp->netdev,
+						"Invalid variant for MAC pass through\n");
+				return -ENODEV;
+			}
+		}
+
+		mac_obj_name = "\\_SB.AMAC";
+		mac_obj_type = ACPI_TYPE_BUFFER;
+		mac_strlen = 0x17;
+	}
+
+	/* returns _AUXMAC_#AABBCCDDEEFF# */
+	status = acpi_evaluate_object(NULL, mac_obj_name, NULL, &buffer);
+	obj = (union acpi_object *)buffer.pointer;
+	if (!ACPI_SUCCESS(status))
+		return -ENODEV;
+	if (obj->type != mac_obj_type || obj->string.length != mac_strlen) {
+		netif_warn(tp, probe, tp->netdev,
+			   "Invalid buffer for pass-thru MAC addr: (%d, %d)\n",
+			   obj->type, obj->string.length);
+		goto amacout;
+	}
+
+	if (strncmp(obj->string.pointer, "_AUXMAC_#", 9) != 0 ||
+	    strncmp(obj->string.pointer + 0x15, "#", 1) != 0) {
+		netif_warn(tp, probe, tp->netdev,
+			   "Invalid header when reading pass-thru MAC addr\n");
+		goto amacout;
+	}
+	ret = hex2bin(buf, obj->string.pointer + 9, 6);
+	if (!(ret == 0 && is_valid_ether_addr(buf))) {
+		netif_warn(tp, probe, tp->netdev,
+			   "Invalid MAC for pass-thru MAC addr: %d, %pM\n",
+			   ret, buf);
+		ret = -EINVAL;
+		goto amacout;
+	}
+	memcpy(sa->sa_data, buf, 6);
+	netif_info(tp, probe, tp->netdev,
+		   "Using pass-thru MAC addr %pM\n", sa->sa_data);
+
+amacout:
+	kfree(obj);
+	return ret;
+}
+
+static int determine_ethernet_addr(struct r8152 *tp, struct sockaddr *sa)
+{
+	struct net_device *dev = tp->netdev;
+	int ret;
+
+	sa->sa_family = dev->type;
+
+	ret = eth_platform_get_mac_address(&tp->udev->dev, sa->sa_data);
+	if (ret < 0) {
+		if (tp->version == RTL_VER_01) {
+			ret = pla_ocp_read(tp, PLA_IDR, 8, sa->sa_data);
+		} else {
+			/* if device doesn't support MAC pass through this will
+			 * be expected to be non-zero
+			 */
+			ret = vendor_mac_passthru_addr_read(tp, sa);
+			if (ret < 0)
+				ret = pla_ocp_read(tp, PLA_BACKUP, 8,
+						   sa->sa_data);
+		}
+	}
+
+	if (ret < 0) {
+		netif_err(tp, probe, dev, "Get ether addr fail\n");
+	} else if (!is_valid_ether_addr(sa->sa_data)) {
+		netif_err(tp, probe, dev, "Invalid ether addr %pM\n",
+			  sa->sa_data);
+		eth_hw_addr_random(dev);
+		ether_addr_copy(sa->sa_data, dev->dev_addr);
+		netif_info(tp, probe, dev, "Random ether addr %pM\n",
+			   sa->sa_data);
+		return 0;
+	}
+
+	return ret;
+}
+
+static int set_ethernet_addr(struct r8152 *tp, bool in_resume)
+{
+	struct net_device *dev = tp->netdev;
+	struct sockaddr sa;
+	int ret;
+
+	ret = determine_ethernet_addr(tp, &sa);
+	if (ret < 0)
+		return ret;
+
+	if (tp->version == RTL_VER_01)
+		eth_hw_addr_set(dev, sa.sa_data);
+	else
+		ret = __rtl8152_set_mac_address(dev, &sa, in_resume);
+
+	return ret;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+	struct net_device *netdev;
+	int status = urb->status;
+	struct rx_agg *agg;
+	struct r8152 *tp;
+	unsigned long flags;
+
+	agg = urb->context;
+	if (!agg)
+		return;
+
+	tp = agg->context;
+	if (!tp)
+		return;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	netdev = tp->netdev;
+
+	/* When link down, the driver would cancel all bulks. */
+	/* This avoid the re-submitting bulk */
+	if (!netif_carrier_ok(netdev))
+		return;
+
+	usb_mark_last_busy(tp->udev);
+
+	switch (status) {
+	case 0:
+		if (urb->actual_length < ETH_ZLEN)
+			break;
+
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_add_tail(&agg->list, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		napi_schedule(&tp->napi);
+		return;
+	case -ESHUTDOWN:
+		rtl_set_unplug(tp);
+		netif_device_detach(tp->netdev);
+		return;
+	case -EPROTO:
+		urb->actual_length = 0;
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_add_tail(&agg->list, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+		set_bit(RX_EPROTO, &tp->flags);
+		schedule_delayed_work(&tp->schedule, 1);
+		return;
+	case -ENOENT:
+		return;	/* the urb is in unlink state */
+	case -ETIME:
+		if (net_ratelimit())
+			netdev_warn(netdev, "maybe reset is needed?\n");
+		break;
+	default:
+		if (net_ratelimit())
+			netdev_warn(netdev, "Rx status %d\n", status);
+		break;
+	}
+
+	r8152_submit_rx(tp, agg, GFP_ATOMIC);
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+	struct net_device_stats *stats;
+	struct net_device *netdev;
+	struct tx_agg *agg;
+	struct r8152 *tp;
+	unsigned long flags;
+	int status = urb->status;
+
+	agg = urb->context;
+	if (!agg)
+		return;
+
+	tp = agg->context;
+	if (!tp)
+		return;
+
+	netdev = tp->netdev;
+	stats = &netdev->stats;
+	if (status) {
+		if (net_ratelimit())
+			netdev_warn(netdev, "Tx status %d\n", status);
+		stats->tx_errors += agg->skb_num;
+	} else {
+		stats->tx_packets += agg->skb_num;
+		stats->tx_bytes += agg->skb_len;
+	}
+
+	spin_lock_irqsave(&tp->tx_lock, flags);
+	list_add_tail(&agg->list, &tp->tx_free);
+	spin_unlock_irqrestore(&tp->tx_lock, flags);
+
+	usb_autopm_put_interface_async(tp->intf);
+
+	if (!netif_carrier_ok(netdev))
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	if (!skb_queue_empty(&tp->tx_queue))
+		tasklet_schedule(&tp->tx_tl);
+}
+
+static void intr_callback(struct urb *urb)
+{
+	struct r8152 *tp;
+	__le16 *d;
+	int status = urb->status;
+	int res;
+
+	tp = urb->context;
+	if (!tp)
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ESHUTDOWN:
+		netif_device_detach(tp->netdev);
+		fallthrough;
+	case -ENOENT:
+	case -EPROTO:
+		netif_info(tp, intr, tp->netdev,
+			   "Stop submitting intr, status %d\n", status);
+		return;
+	case -EOVERFLOW:
+		if (net_ratelimit())
+			netif_info(tp, intr, tp->netdev,
+				   "intr status -EOVERFLOW\n");
+		goto resubmit;
+	/* -EPIPE:  should clear the halt */
+	default:
+		netif_info(tp, intr, tp->netdev, "intr status %d\n", status);
+		goto resubmit;
+	}
+
+	d = urb->transfer_buffer;
+	if (INTR_LINK & __le16_to_cpu(d[0])) {
+		if (!netif_carrier_ok(tp->netdev)) {
+			set_bit(RTL8152_LINK_CHG, &tp->flags);
+			schedule_delayed_work(&tp->schedule, 0);
+		}
+	} else {
+		if (netif_carrier_ok(tp->netdev)) {
+			netif_stop_queue(tp->netdev);
+			set_bit(RTL8152_LINK_CHG, &tp->flags);
+			schedule_delayed_work(&tp->schedule, 0);
+		}
+	}
+
+resubmit:
+	res = usb_submit_urb(urb, GFP_ATOMIC);
+	if (res == -ENODEV) {
+		rtl_set_unplug(tp);
+		netif_device_detach(tp->netdev);
+	} else if (res) {
+		netif_err(tp, intr, tp->netdev,
+			  "can't resubmit intr, status %d\n", res);
+	}
+}
+
+static inline void *rx_agg_align(void *data)
+{
+	return (void *)ALIGN((uintptr_t)data, RX_ALIGN);
+}
+
+static inline void *tx_agg_align(void *data)
+{
+	return (void *)ALIGN((uintptr_t)data, TX_ALIGN);
+}
+
+static void free_rx_agg(struct r8152 *tp, struct rx_agg *agg)
+{
+	list_del(&agg->info_list);
+
+	usb_free_urb(agg->urb);
+	put_page(agg->page);
+	kfree(agg);
+
+	atomic_dec(&tp->rx_count);
+}
+
+static struct rx_agg *alloc_rx_agg(struct r8152 *tp, gfp_t mflags)
+{
+	struct net_device *netdev = tp->netdev;
+	int node = netdev->dev.parent ? dev_to_node(netdev->dev.parent) : -1;
+	unsigned int order = get_order(tp->rx_buf_sz);
+	struct rx_agg *rx_agg;
+	unsigned long flags;
+
+	rx_agg = kmalloc_node(sizeof(*rx_agg), mflags, node);
+	if (!rx_agg)
+		return NULL;
+
+	rx_agg->page = alloc_pages(mflags | __GFP_COMP, order);
+	if (!rx_agg->page)
+		goto free_rx;
+
+	rx_agg->buffer = page_address(rx_agg->page);
+
+	rx_agg->urb = usb_alloc_urb(0, mflags);
+	if (!rx_agg->urb)
+		goto free_buf;
+
+	rx_agg->context = tp;
+
+	INIT_LIST_HEAD(&rx_agg->list);
+	INIT_LIST_HEAD(&rx_agg->info_list);
+	spin_lock_irqsave(&tp->rx_lock, flags);
+	list_add_tail(&rx_agg->info_list, &tp->rx_info);
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+	atomic_inc(&tp->rx_count);
+
+	return rx_agg;
+
+free_buf:
+	__free_pages(rx_agg->page, order);
+free_rx:
+	kfree(rx_agg);
+	return NULL;
+}
+
+static void free_all_mem(struct r8152 *tp)
+{
+	struct rx_agg *agg, *agg_next;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&tp->rx_lock, flags);
+
+	list_for_each_entry_safe(agg, agg_next, &tp->rx_info, info_list)
+		free_rx_agg(tp, agg);
+
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+	WARN_ON(atomic_read(&tp->rx_count));
+
+	for (i = 0; i < RTL8152_MAX_TX; i++) {
+		usb_free_urb(tp->tx_info[i].urb);
+		tp->tx_info[i].urb = NULL;
+
+		kfree(tp->tx_info[i].buffer);
+		tp->tx_info[i].buffer = NULL;
+		tp->tx_info[i].head = NULL;
+	}
+
+	usb_free_urb(tp->intr_urb);
+	tp->intr_urb = NULL;
+
+	kfree(tp->intr_buff);
+	tp->intr_buff = NULL;
+}
+
+static int alloc_all_mem(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	struct usb_interface *intf = tp->intf;
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	struct usb_host_endpoint *ep_intr = alt->endpoint + 2;
+	int node, i;
+
+	node = netdev->dev.parent ? dev_to_node(netdev->dev.parent) : -1;
+
+	spin_lock_init(&tp->rx_lock);
+	spin_lock_init(&tp->tx_lock);
+	INIT_LIST_HEAD(&tp->rx_info);
+	INIT_LIST_HEAD(&tp->tx_free);
+	INIT_LIST_HEAD(&tp->rx_done);
+	skb_queue_head_init(&tp->tx_queue);
+	skb_queue_head_init(&tp->rx_queue);
+	atomic_set(&tp->rx_count, 0);
+
+	for (i = 0; i < RTL8152_MAX_RX; i++) {
+		if (!alloc_rx_agg(tp, GFP_KERNEL))
+			goto err1;
+	}
+
+	for (i = 0; i < RTL8152_MAX_TX; i++) {
+		struct urb *urb;
+		u8 *buf;
+
+		buf = kmalloc_node(agg_buf_sz, GFP_KERNEL, node);
+		if (!buf)
+			goto err1;
+
+		if (buf != tx_agg_align(buf)) {
+			kfree(buf);
+			buf = kmalloc_node(agg_buf_sz + TX_ALIGN, GFP_KERNEL,
+					   node);
+			if (!buf)
+				goto err1;
+		}
+
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			kfree(buf);
+			goto err1;
+		}
+
+		INIT_LIST_HEAD(&tp->tx_info[i].list);
+		tp->tx_info[i].context = tp;
+		tp->tx_info[i].urb = urb;
+		tp->tx_info[i].buffer = buf;
+		tp->tx_info[i].head = tx_agg_align(buf);
+
+		list_add_tail(&tp->tx_info[i].list, &tp->tx_free);
+	}
+
+	tp->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!tp->intr_urb)
+		goto err1;
+
+	tp->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
+	if (!tp->intr_buff)
+		goto err1;
+
+	tp->intr_interval = (int)ep_intr->desc.bInterval;
+	usb_fill_int_urb(tp->intr_urb, tp->udev, tp->pipe_intr,
+			 tp->intr_buff, INTBUFSIZE, intr_callback,
+			 tp, tp->intr_interval);
+
+	return 0;
+
+err1:
+	free_all_mem(tp);
+	return -ENOMEM;
+}
+
+static struct tx_agg *r8152_get_tx_agg(struct r8152 *tp)
+{
+	struct tx_agg *agg = NULL;
+	unsigned long flags;
+
+	if (list_empty(&tp->tx_free))
+		return NULL;
+
+	spin_lock_irqsave(&tp->tx_lock, flags);
+	if (!list_empty(&tp->tx_free)) {
+		struct list_head *cursor;
+
+		cursor = tp->tx_free.next;
+		list_del_init(cursor);
+		agg = list_entry(cursor, struct tx_agg, list);
+	}
+	spin_unlock_irqrestore(&tp->tx_lock, flags);
+
+	return agg;
+}
+
+/* r8152_csum_workaround()
+ * The hw limits the value of the transport offset. When the offset is out of
+ * range, calculate the checksum by sw.
+ */
+static void r8152_csum_workaround(struct r8152 *tp, struct sk_buff *skb,
+				  struct sk_buff_head *list)
+{
+	if (skb_shinfo(skb)->gso_size) {
+		netdev_features_t features = tp->netdev->features;
+		struct sk_buff *segs, *seg, *next;
+		struct sk_buff_head seg_list;
+
+		features &= ~(NETIF_F_SG | NETIF_F_IPV6_CSUM | NETIF_F_TSO6);
+		segs = skb_gso_segment(skb, features);
+		if (IS_ERR(segs) || !segs)
+			goto drop;
+
+		__skb_queue_head_init(&seg_list);
+
+		skb_list_walk_safe(segs, seg, next) {
+			skb_mark_not_on_list(seg);
+			__skb_queue_tail(&seg_list, seg);
+		}
+
+		skb_queue_splice(&seg_list, list);
+		dev_kfree_skb(skb);
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		if (skb_checksum_help(skb) < 0)
+			goto drop;
+
+		__skb_queue_head(list, skb);
+	} else {
+		struct net_device_stats *stats;
+
+drop:
+		stats = &tp->netdev->stats;
+		stats->tx_dropped++;
+		dev_kfree_skb(skb);
+	}
+}
+
+static inline void rtl_tx_vlan_tag(struct tx_desc *desc, struct sk_buff *skb)
+{
+	if (skb_vlan_tag_present(skb)) {
+		u32 opts2;
+
+		opts2 = TX_VLAN_TAG | swab16(skb_vlan_tag_get(skb));
+		desc->opts2 |= cpu_to_le32(opts2);
+	}
+}
+
+static inline void rtl_rx_vlan_tag(struct rx_desc *desc, struct sk_buff *skb)
+{
+	u32 opts2 = le32_to_cpu(desc->opts2);
+
+	if (opts2 & RX_VLAN_TAG)
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
+				       swab16(opts2 & 0xffff));
+}
+
+static int r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc,
+			 struct sk_buff *skb, u32 len)
+{
+	u32 mss = skb_shinfo(skb)->gso_size;
+	u32 opts1, opts2 = 0;
+	int ret = TX_CSUM_SUCCESS;
+
+	WARN_ON_ONCE(len > TX_LEN_MAX);
+
+	opts1 = len | TX_FS | TX_LS;
+
+	if (mss) {
+		u32 transport_offset = (u32)skb_transport_offset(skb);
+
+		if (transport_offset > GTTCPHO_MAX) {
+			netif_warn(tp, tx_err, tp->netdev,
+				   "Invalid transport offset 0x%x for TSO\n",
+				   transport_offset);
+			ret = TX_CSUM_TSO;
+			goto unavailable;
+		}
+
+		switch (vlan_get_protocol(skb)) {
+		case htons(ETH_P_IP):
+			opts1 |= GTSENDV4;
+			break;
+
+		case htons(ETH_P_IPV6):
+			if (skb_cow_head(skb, 0)) {
+				ret = TX_CSUM_TSO;
+				goto unavailable;
+			}
+			tcp_v6_gso_csum_prep(skb);
+			opts1 |= GTSENDV6;
+			break;
+
+		default:
+			WARN_ON_ONCE(1);
+			break;
+		}
+
+		opts1 |= transport_offset << GTTCPHO_SHIFT;
+		opts2 |= min(mss, MSS_MAX) << MSS_SHIFT;
+	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
+		u32 transport_offset = (u32)skb_transport_offset(skb);
+		u8 ip_protocol;
+
+		if (transport_offset > TCPHO_MAX) {
+			netif_warn(tp, tx_err, tp->netdev,
+				   "Invalid transport offset 0x%x\n",
+				   transport_offset);
+			ret = TX_CSUM_NONE;
+			goto unavailable;
+		}
+
+		switch (vlan_get_protocol(skb)) {
+		case htons(ETH_P_IP):
+			opts2 |= IPV4_CS;
+			ip_protocol = ip_hdr(skb)->protocol;
+			break;
+
+		case htons(ETH_P_IPV6):
+			opts2 |= IPV6_CS;
+			ip_protocol = ipv6_hdr(skb)->nexthdr;
+			break;
+
+		default:
+			ip_protocol = IPPROTO_RAW;
+			break;
+		}
+
+		if (ip_protocol == IPPROTO_TCP)
+			opts2 |= TCP_CS;
+		else if (ip_protocol == IPPROTO_UDP)
+			opts2 |= UDP_CS;
+		else
+			WARN_ON_ONCE(1);
+
+		opts2 |= transport_offset << TCPHO_SHIFT;
+	}
+
+	desc->opts2 = cpu_to_le32(opts2);
+	desc->opts1 = cpu_to_le32(opts1);
+
+unavailable:
+	return ret;
+}
+
+static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
+{
+	struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
+	int remain, ret;
+	u8 *tx_data;
+
+	__skb_queue_head_init(&skb_head);
+	spin_lock(&tx_queue->lock);
+	skb_queue_splice_init(tx_queue, &skb_head);
+	spin_unlock(&tx_queue->lock);
+
+	tx_data = agg->head;
+	agg->skb_num = 0;
+	agg->skb_len = 0;
+	remain = agg_buf_sz;
+
+	while (remain >= ETH_ZLEN + sizeof(struct tx_desc)) {
+		struct tx_desc *tx_desc;
+		struct sk_buff *skb;
+		unsigned int len;
+
+		skb = __skb_dequeue(&skb_head);
+		if (!skb)
+			break;
+
+		len = skb->len + sizeof(*tx_desc);
+
+		if (len > remain) {
+			__skb_queue_head(&skb_head, skb);
+			break;
+		}
+
+		tx_data = tx_agg_align(tx_data);
+		tx_desc = (struct tx_desc *)tx_data;
+
+		if (r8152_tx_csum(tp, tx_desc, skb, skb->len)) {
+			r8152_csum_workaround(tp, skb, &skb_head);
+			continue;
+		}
+
+		rtl_tx_vlan_tag(tx_desc, skb);
+
+		tx_data += sizeof(*tx_desc);
+
+		len = skb->len;
+		if (skb_copy_bits(skb, 0, tx_data, len) < 0) {
+			struct net_device_stats *stats = &tp->netdev->stats;
+
+			stats->tx_dropped++;
+			dev_kfree_skb_any(skb);
+			tx_data -= sizeof(*tx_desc);
+			continue;
+		}
+
+		tx_data += len;
+		agg->skb_len += len;
+		agg->skb_num += skb_shinfo(skb)->gso_segs ?: 1;
+
+		dev_kfree_skb_any(skb);
+
+		remain = agg_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
+
+		if (tp->dell_tb_rx_agg_bug)
+			break;
+	}
+
+	if (!skb_queue_empty(&skb_head)) {
+		spin_lock(&tx_queue->lock);
+		skb_queue_splice(&skb_head, tx_queue);
+		spin_unlock(&tx_queue->lock);
+	}
+
+	netif_tx_lock(tp->netdev);
+
+	if (netif_queue_stopped(tp->netdev) &&
+	    skb_queue_len(&tp->tx_queue) < tp->tx_qlen)
+		netif_wake_queue(tp->netdev);
+
+	netif_tx_unlock(tp->netdev);
+
+	ret = usb_autopm_get_interface_async(tp->intf);
+	if (ret < 0)
+		goto out_tx_fill;
+
+	usb_fill_bulk_urb(agg->urb, tp->udev, tp->pipe_out,
+			  agg->head, (int)(tx_data - (u8 *)agg->head),
+			  (usb_complete_t)write_bulk_callback, agg);
+
+	ret = usb_submit_urb(agg->urb, GFP_ATOMIC);
+	if (ret < 0)
+		usb_autopm_put_interface_async(tp->intf);
+
+out_tx_fill:
+	return ret;
+}
+
+static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc)
+{
+	u8 checksum = CHECKSUM_NONE;
+	u32 opts2, opts3;
+
+	if (!(tp->netdev->features & NETIF_F_RXCSUM))
+		goto return_result;
+
+	opts2 = le32_to_cpu(rx_desc->opts2);
+	opts3 = le32_to_cpu(rx_desc->opts3);
+
+	if (opts2 & RD_IPV4_CS) {
+		if (opts3 & IPF)
+			checksum = CHECKSUM_NONE;
+		else if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
+			checksum = CHECKSUM_UNNECESSARY;
+		else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF))
+			checksum = CHECKSUM_UNNECESSARY;
+	} else if (opts2 & RD_IPV6_CS) {
+		if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF))
+			checksum = CHECKSUM_UNNECESSARY;
+		else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF))
+			checksum = CHECKSUM_UNNECESSARY;
+	}
+
+return_result:
+	return checksum;
+}
+
+static inline bool rx_count_exceed(struct r8152 *tp)
+{
+	return atomic_read(&tp->rx_count) > RTL8152_MAX_RX;
+}
+
+static inline int agg_offset(struct rx_agg *agg, void *addr)
+{
+	return (int)(addr - agg->buffer);
+}
+
+static struct rx_agg *rtl_get_free_rx(struct r8152 *tp, gfp_t mflags)
+{
+	struct rx_agg *agg, *agg_next, *agg_free = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tp->rx_lock, flags);
+
+	list_for_each_entry_safe(agg, agg_next, &tp->rx_used, list) {
+		if (page_count(agg->page) == 1) {
+			if (!agg_free) {
+				list_del_init(&agg->list);
+				agg_free = agg;
+				continue;
+			}
+			if (rx_count_exceed(tp)) {
+				list_del_init(&agg->list);
+				free_rx_agg(tp, agg);
+			}
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+	if (!agg_free && atomic_read(&tp->rx_count) < tp->rx_pending)
+		agg_free = alloc_rx_agg(tp, mflags);
+
+	return agg_free;
+}
+
+static int rx_bottom(struct r8152 *tp, int budget)
+{
+	unsigned long flags;
+	struct list_head *cursor, *next, rx_queue;
+	int ret = 0, work_done = 0;
+	struct napi_struct *napi = &tp->napi;
+
+	if (!skb_queue_empty(&tp->rx_queue)) {
+		while (work_done < budget) {
+			struct sk_buff *skb = __skb_dequeue(&tp->rx_queue);
+			struct net_device *netdev = tp->netdev;
+			struct net_device_stats *stats = &netdev->stats;
+			unsigned int pkt_len;
+
+			if (!skb)
+				break;
+
+			pkt_len = skb->len;
+			napi_gro_receive(napi, skb);
+			work_done++;
+			stats->rx_packets++;
+			stats->rx_bytes += pkt_len;
+		}
+	}
+
+	if (list_empty(&tp->rx_done))
+		goto out1;
+
+	clear_bit(RX_EPROTO, &tp->flags);
+	INIT_LIST_HEAD(&rx_queue);
+	spin_lock_irqsave(&tp->rx_lock, flags);
+	list_splice_init(&tp->rx_done, &rx_queue);
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+	list_for_each_safe(cursor, next, &rx_queue) {
+		struct rx_desc *rx_desc;
+		struct rx_agg *agg, *agg_free;
+		int len_used = 0;
+		struct urb *urb;
+		u8 *rx_data;
+
+		list_del_init(cursor);
+
+		agg = list_entry(cursor, struct rx_agg, list);
+		urb = agg->urb;
+		if (urb->status != 0 || urb->actual_length < ETH_ZLEN)
+			goto submit;
+
+		agg_free = rtl_get_free_rx(tp, GFP_ATOMIC);
+
+		rx_desc = agg->buffer;
+		rx_data = agg->buffer;
+		len_used += sizeof(struct rx_desc);
+
+		while (urb->actual_length > len_used) {
+			struct net_device *netdev = tp->netdev;
+			struct net_device_stats *stats = &netdev->stats;
+			unsigned int pkt_len, rx_frag_head_sz;
+			struct sk_buff *skb;
+
+			/* limit the skb numbers for rx_queue */
+			if (unlikely(skb_queue_len(&tp->rx_queue) >= 1000))
+				break;
+
+			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
+			if (pkt_len < ETH_ZLEN)
+				break;
+
+			len_used += pkt_len;
+			if (urb->actual_length < len_used)
+				break;
+
+			pkt_len -= ETH_FCS_LEN;
+			rx_data += sizeof(struct rx_desc);
+
+			if (!agg_free || tp->rx_copybreak > pkt_len)
+				rx_frag_head_sz = pkt_len;
+			else
+				rx_frag_head_sz = tp->rx_copybreak;
+
+			skb = napi_alloc_skb(napi, rx_frag_head_sz);
+			if (!skb) {
+				stats->rx_dropped++;
+				goto find_next_rx;
+			}
+
+			skb->ip_summed = r8152_rx_csum(tp, rx_desc);
+			memcpy(skb->data, rx_data, rx_frag_head_sz);
+			skb_put(skb, rx_frag_head_sz);
+			pkt_len -= rx_frag_head_sz;
+			rx_data += rx_frag_head_sz;
+			if (pkt_len) {
+				skb_add_rx_frag(skb, 0, agg->page,
+						agg_offset(agg, rx_data),
+						pkt_len,
+						SKB_DATA_ALIGN(pkt_len));
+				get_page(agg->page);
+			}
+
+			skb->protocol = eth_type_trans(skb, netdev);
+			rtl_rx_vlan_tag(rx_desc, skb);
+			if (work_done < budget) {
+				work_done++;
+				stats->rx_packets++;
+				stats->rx_bytes += skb->len;
+				napi_gro_receive(napi, skb);
+			} else {
+				__skb_queue_tail(&tp->rx_queue, skb);
+			}
+
+find_next_rx:
+			rx_data = rx_agg_align(rx_data + pkt_len + ETH_FCS_LEN);
+			rx_desc = (struct rx_desc *)rx_data;
+			len_used = agg_offset(agg, rx_data);
+			len_used += sizeof(struct rx_desc);
+		}
+
+		WARN_ON(!agg_free && page_count(agg->page) > 1);
+
+		if (agg_free) {
+			spin_lock_irqsave(&tp->rx_lock, flags);
+			if (page_count(agg->page) == 1) {
+				list_add(&agg_free->list, &tp->rx_used);
+			} else {
+				list_add_tail(&agg->list, &tp->rx_used);
+				agg = agg_free;
+				urb = agg->urb;
+			}
+			spin_unlock_irqrestore(&tp->rx_lock, flags);
+		}
+
+submit:
+		if (!ret) {
+			ret = r8152_submit_rx(tp, agg, GFP_ATOMIC);
+		} else {
+			urb->actual_length = 0;
+			list_add_tail(&agg->list, next);
+		}
+	}
+
+	if (!list_empty(&rx_queue)) {
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_splice_tail(&rx_queue, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+	}
+
+out1:
+	return work_done;
+}
+
+static void tx_bottom(struct r8152 *tp)
+{
+	int res;
+
+	do {
+		struct net_device *netdev = tp->netdev;
+		struct tx_agg *agg;
+
+		if (skb_queue_empty(&tp->tx_queue))
+			break;
+
+		agg = r8152_get_tx_agg(tp);
+		if (!agg)
+			break;
+
+		res = r8152_tx_agg_fill(tp, agg);
+		if (!res)
+			continue;
+
+		if (res == -ENODEV) {
+			rtl_set_unplug(tp);
+			netif_device_detach(netdev);
+		} else {
+			struct net_device_stats *stats = &netdev->stats;
+			unsigned long flags;
+
+			netif_warn(tp, tx_err, netdev,
+				   "failed tx_urb %d\n", res);
+			stats->tx_dropped += agg->skb_num;
+
+			spin_lock_irqsave(&tp->tx_lock, flags);
+			list_add_tail(&agg->list, &tp->tx_free);
+			spin_unlock_irqrestore(&tp->tx_lock, flags);
+		}
+	} while (res == 0);
+}
+
+static void bottom_half(struct tasklet_struct *t)
+{
+	struct r8152 *tp = from_tasklet(tp, t, tx_tl);
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		return;
+
+	/* When link down, the driver would cancel all bulks. */
+	/* This avoid the re-submitting bulk */
+	if (!netif_carrier_ok(tp->netdev))
+		return;
+
+	clear_bit(SCHEDULE_TASKLET, &tp->flags);
+
+	tx_bottom(tp);
+}
+
+static int r8152_poll(struct napi_struct *napi, int budget)
+{
+	struct r8152 *tp = container_of(napi, struct r8152, napi);
+	int work_done;
+
+	if (!budget)
+		return 0;
+
+	work_done = rx_bottom(tp, budget);
+
+	if (work_done < budget) {
+		if (!napi_complete_done(napi, work_done))
+			goto out;
+		if (!list_empty(&tp->rx_done))
+			napi_schedule(napi);
+	}
+
+out:
+	return work_done;
+}
+
+static
+int r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags)
+{
+	int ret;
+
+	/* The rx would be stopped, so skip submitting */
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags) ||
+	    !test_bit(WORK_ENABLE, &tp->flags) || !netif_carrier_ok(tp->netdev))
+		return 0;
+
+	usb_fill_bulk_urb(agg->urb, tp->udev, tp->pipe_in,
+			  agg->buffer, tp->rx_buf_sz,
+			  (usb_complete_t)read_bulk_callback, agg);
+
+	ret = usb_submit_urb(agg->urb, mem_flags);
+	if (ret == -ENODEV) {
+		rtl_set_unplug(tp);
+		netif_device_detach(tp->netdev);
+	} else if (ret) {
+		struct urb *urb = agg->urb;
+		unsigned long flags;
+
+		urb->actual_length = 0;
+		spin_lock_irqsave(&tp->rx_lock, flags);
+		list_add_tail(&agg->list, &tp->rx_done);
+		spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+		netif_err(tp, rx_err, tp->netdev,
+			  "Couldn't submit rx[%p], ret = %d\n", agg, ret);
+
+		napi_schedule(&tp->napi);
+	}
+
+	return ret;
+}
+
+static void rtl_drop_queued_tx(struct r8152 *tp)
+{
+	struct net_device_stats *stats = &tp->netdev->stats;
+	struct sk_buff_head skb_head, *tx_queue = &tp->tx_queue;
+	struct sk_buff *skb;
+
+	if (skb_queue_empty(tx_queue))
+		return;
+
+	__skb_queue_head_init(&skb_head);
+	spin_lock_bh(&tx_queue->lock);
+	skb_queue_splice_init(tx_queue, &skb_head);
+	spin_unlock_bh(&tx_queue->lock);
+
+	while ((skb = __skb_dequeue(&skb_head))) {
+		dev_kfree_skb(skb);
+		stats->tx_dropped++;
+	}
+}
+
+static void rtl8152_tx_timeout(struct net_device *netdev, unsigned int txqueue)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	netif_warn(tp, tx_err, netdev, "Tx timeout\n");
+
+	usb_queue_reset_device(tp->intf);
+}
+
+static void rtl8152_set_rx_mode(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (netif_carrier_ok(netdev)) {
+		set_bit(RTL8152_SET_RX_MODE, &tp->flags);
+		schedule_delayed_work(&tp->schedule, 0);
+	}
+}
+
+static void _rtl8152_set_rx_mode(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	u32 mc_filter[2];	/* Multicast hash filter */
+	__le32 tmp[2];
+	u32 ocp_data;
+
+	netif_stop_queue(netdev);
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_data |= RCR_AB | RCR_APM;
+
+	if (netdev->flags & IFF_PROMISC) {
+		/* Unconditionally log net taps. */
+		netif_notice(tp, link, netdev, "Promiscuous mode enabled\n");
+		ocp_data |= RCR_AM | RCR_AAP;
+		mc_filter[1] = 0xffffffff;
+		mc_filter[0] = 0xffffffff;
+	} else if ((netdev->flags & IFF_MULTICAST &&
+				netdev_mc_count(netdev) > multicast_filter_limit) ||
+			   (netdev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		ocp_data |= RCR_AM;
+		mc_filter[1] = 0xffffffff;
+		mc_filter[0] = 0xffffffff;
+	} else {
+		mc_filter[1] = 0;
+		mc_filter[0] = 0;
+
+		if (netdev->flags & IFF_MULTICAST) {
+			struct netdev_hw_addr *ha;
+
+			netdev_for_each_mc_addr(ha, netdev) {
+				int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
+
+				mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+				ocp_data |= RCR_AM;
+			}
+		}
+	}
+
+	tmp[0] = __cpu_to_le32(swab32(mc_filter[1]));
+	tmp[1] = __cpu_to_le32(swab32(mc_filter[0]));
+
+	pla_ocp_write(tp, PLA_MAR, BYTE_EN_DWORD, sizeof(tmp), tmp);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+	netif_wake_queue(netdev);
+}
+
+static netdev_features_t
+rtl8152_features_check(struct sk_buff *skb, struct net_device *dev,
+		       netdev_features_t features)
+{
+	u32 mss = skb_shinfo(skb)->gso_size;
+	int max_offset = mss ? GTTCPHO_MAX : TCPHO_MAX;
+
+	if ((mss || skb->ip_summed == CHECKSUM_PARTIAL) &&
+	    skb_transport_offset(skb) > max_offset)
+		features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
+	else if ((skb->len + sizeof(struct tx_desc)) > agg_buf_sz)
+		features &= ~NETIF_F_GSO_MASK;
+
+	return features;
+}
+
+static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
+				      struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	skb_tx_timestamp(skb);
+
+	skb_queue_tail(&tp->tx_queue, skb);
+
+	if (!list_empty(&tp->tx_free)) {
+		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+			set_bit(SCHEDULE_TASKLET, &tp->flags);
+			schedule_delayed_work(&tp->schedule, 0);
+		} else {
+			usb_mark_last_busy(tp->udev);
+			tasklet_schedule(&tp->tx_tl);
+		}
+	} else if (skb_queue_len(&tp->tx_queue) > tp->tx_qlen) {
+		netif_stop_queue(netdev);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+static void r8152b_reset_packet_filter(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
+	ocp_data &= ~FMC_FCR_MCU_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+	ocp_data |= FMC_FCR_MCU_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+}
+
+static void rtl8152_nic_reset(struct r8152 *tp)
+{
+	u32 ocp_data;
+	int i;
+
+	switch (tp->version) {
+	case RTL_TEST_01:
+	case RTL_VER_10:
+	case RTL_VER_11:
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
+		ocp_data &= ~CR_TE;
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
+		ocp_data &= ~BMU_RESET_EP_IN;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+		ocp_data |= CDC_ECM_EN;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
+		ocp_data &= ~CR_RE;
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
+		ocp_data |= BMU_RESET_EP_IN;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+		ocp_data &= ~CDC_ECM_EN;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+		break;
+
+	default:
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, CR_RST);
+
+		for (i = 0; i < 1000; i++) {
+			if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+				break;
+			if (!(ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR) & CR_RST))
+				break;
+			usleep_range(100, 400);
+		}
+		break;
+	}
+}
+
+static void set_tx_qlen(struct r8152 *tp)
+{
+	tp->tx_qlen = agg_buf_sz / (mtu_to_size(tp->netdev->mtu) + sizeof(struct tx_desc));
+}
+
+static inline u16 rtl8152_get_speed(struct r8152 *tp)
+{
+	return ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
+}
+
+static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
+	if (enable)
+		ocp_data |= EEEP_CR_EEEP_TX;
+	else
+		ocp_data &= ~EEEP_CR_EEEP_TX;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+}
+
+static void rtl_set_eee_plus(struct r8152 *tp)
+{
+	if (rtl8152_get_speed(tp) & _10bps)
+		rtl_eee_plus_en(tp, true);
+	else
+		rtl_eee_plus_en(tp, false);
+}
+
+static void rxdy_gated_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
+	if (enable)
+		ocp_data |= RXDY_GATED_EN;
+	else
+		ocp_data &= ~RXDY_GATED_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+}
+
+static int rtl_start_rx(struct r8152 *tp)
+{
+	struct rx_agg *agg, *agg_next;
+	struct list_head tmp_list;
+	unsigned long flags;
+	int ret = 0, i = 0;
+
+	INIT_LIST_HEAD(&tmp_list);
+
+	spin_lock_irqsave(&tp->rx_lock, flags);
+
+	INIT_LIST_HEAD(&tp->rx_done);
+	INIT_LIST_HEAD(&tp->rx_used);
+
+	list_splice_init(&tp->rx_info, &tmp_list);
+
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+	list_for_each_entry_safe(agg, agg_next, &tmp_list, info_list) {
+		INIT_LIST_HEAD(&agg->list);
+
+		/* Only RTL8152_MAX_RX rx_agg need to be submitted. */
+		if (++i > RTL8152_MAX_RX) {
+			spin_lock_irqsave(&tp->rx_lock, flags);
+			list_add_tail(&agg->list, &tp->rx_used);
+			spin_unlock_irqrestore(&tp->rx_lock, flags);
+		} else if (unlikely(ret < 0)) {
+			spin_lock_irqsave(&tp->rx_lock, flags);
+			list_add_tail(&agg->list, &tp->rx_done);
+			spin_unlock_irqrestore(&tp->rx_lock, flags);
+		} else {
+			ret = r8152_submit_rx(tp, agg, GFP_KERNEL);
+		}
+	}
+
+	spin_lock_irqsave(&tp->rx_lock, flags);
+	WARN_ON(!list_empty(&tp->rx_info));
+	list_splice(&tmp_list, &tp->rx_info);
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+	return ret;
+}
+
+static int rtl_stop_rx(struct r8152 *tp)
+{
+	struct rx_agg *agg, *agg_next;
+	struct list_head tmp_list;
+	unsigned long flags;
+
+	INIT_LIST_HEAD(&tmp_list);
+
+	/* The usb_kill_urb() couldn't be used in atomic.
+	 * Therefore, move the list of rx_info to a tmp one.
+	 * Then, list_for_each_entry_safe could be used without
+	 * spin lock.
+	 */
+
+	spin_lock_irqsave(&tp->rx_lock, flags);
+	list_splice_init(&tp->rx_info, &tmp_list);
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+	list_for_each_entry_safe(agg, agg_next, &tmp_list, info_list) {
+		/* At least RTL8152_MAX_RX rx_agg have the page_count being
+		 * equal to 1, so the other ones could be freed safely.
+		 */
+		if (page_count(agg->page) > 1)
+			free_rx_agg(tp, agg);
+		else
+			usb_kill_urb(agg->urb);
+	}
+
+	/* Move back the list of temp to the rx_info */
+	spin_lock_irqsave(&tp->rx_lock, flags);
+	WARN_ON(!list_empty(&tp->rx_info));
+	list_splice(&tmp_list, &tp->rx_info);
+	spin_unlock_irqrestore(&tp->rx_lock, flags);
+
+	while (!skb_queue_empty(&tp->rx_queue))
+		dev_kfree_skb(__skb_dequeue(&tp->rx_queue));
+
+	return 0;
+}
+
+static void rtl_set_ifg(struct r8152 *tp, u16 speed)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
+	ocp_data &= ~IFG_MASK;
+	if ((speed & (_10bps | _100bps)) && !(speed & FULL_DUP)) {
+		ocp_data |= IFG_144NS;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
+		ocp_data &= ~TX10MIDLE_EN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+	} else {
+		ocp_data |= IFG_96NS;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
+		ocp_data |= TX10MIDLE_EN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+	}
+}
+
+static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
+{
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
+		       OWN_UPDATE | OWN_CLEAR);
+}
+
+static int rtl_enable(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	r8152b_reset_packet_filter(tp);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
+	ocp_data |= CR_RE | CR_TE;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+	case RTL_VER_07:
+		break;
+	default:
+		r8153b_rx_agg_chg_indicate(tp);
+		break;
+	}
+
+	rxdy_gated_en(tp, false);
+
+	return 0;
+}
+
+static int rtl8152_enable(struct r8152 *tp)
+{
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return -ENODEV;
+
+	set_tx_qlen(tp);
+	rtl_set_eee_plus(tp);
+
+	return rtl_enable(tp);
+}
+
+static void r8153_set_rx_early_timeout(struct r8152 *tp)
+{
+	u32 ocp_data = tp->coalesce / 8;
+
+	switch (tp->version) {
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
+			       ocp_data);
+		break;
+
+	case RTL_VER_08:
+	case RTL_VER_09:
+	case RTL_VER_14:
+		/* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout
+		 * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns.
+		 */
+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
+			       128 / 8);
+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR,
+			       ocp_data);
+		break;
+
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_15:
+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
+			       640 / 8);
+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR,
+			       ocp_data);
+		break;
+
+	default:
+		break;
+	}
+}
+
+static void r8153_set_rx_early_size(struct r8152 *tp)
+{
+	u32 ocp_data = tp->rx_buf_sz - rx_reserved_size(tp->netdev->mtu);
+
+	switch (tp->version) {
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
+			       ocp_data / 4);
+		break;
+	case RTL_VER_08:
+	case RTL_VER_09:
+	case RTL_VER_14:
+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
+			       ocp_data / 8);
+		break;
+	case RTL_TEST_01:
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_15:
+		ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
+			       ocp_data / 8);
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		break;
+	}
+}
+
+static int rtl8153_enable(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return -ENODEV;
+
+	set_tx_qlen(tp);
+	rtl_set_eee_plus(tp);
+	r8153_set_rx_early_timeout(tp);
+	r8153_set_rx_early_size(tp);
+
+	rtl_set_ifg(tp, rtl8152_get_speed(tp));
+
+	switch (tp->version) {
+	case RTL_VER_09:
+	case RTL_VER_14:
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+		ocp_data &= ~FC_PATCH_TASK;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+		usleep_range(1000, 2000);
+		ocp_data |= FC_PATCH_TASK;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+		break;
+	default:
+		break;
+	}
+
+	return rtl_enable(tp);
+}
+
+static void rtl_disable(struct r8152 *tp)
+{
+	u32 ocp_data;
+	int i;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
+		rtl_drop_queued_tx(tp);
+		return;
+	}
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	rtl_drop_queued_tx(tp);
+
+	for (i = 0; i < RTL8152_MAX_TX; i++)
+		usb_kill_urb(tp->tx_info[i].urb);
+
+	rxdy_gated_en(tp, true);
+
+	for (i = 0; i < 1000; i++) {
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			break;
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if ((ocp_data & FIFO_EMPTY) == FIFO_EMPTY)
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	for (i = 0; i < 1000; i++) {
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			break;
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0) & TCR0_TX_EMPTY)
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	rtl_stop_rx(tp);
+
+	rtl8152_nic_reset(tp);
+}
+
+static void r8152_power_cut_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
+	if (enable)
+		ocp_data |= POWER_CUT;
+	else
+		ocp_data &= ~POWER_CUT;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
+	ocp_data &= ~RESUME_INDICATE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+}
+
+static void rtl_rx_vlan_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+	case RTL_VER_07:
+	case RTL_VER_08:
+	case RTL_VER_09:
+	case RTL_VER_14:
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+		if (enable)
+			ocp_data |= CPCR_RX_VLAN;
+		else
+			ocp_data &= ~CPCR_RX_VLAN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+		break;
+
+	case RTL_TEST_01:
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_15:
+	default:
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR1);
+		if (enable)
+			ocp_data |= OUTER_VLAN | INNER_VLAN;
+		else
+			ocp_data &= ~(OUTER_VLAN | INNER_VLAN);
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR1, ocp_data);
+		break;
+	}
+}
+
+static int rtl8152_set_features(struct net_device *dev,
+				netdev_features_t features)
+{
+	netdev_features_t changed = features ^ dev->features;
+	struct r8152 *tp = netdev_priv(dev);
+	int ret;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
+
+	mutex_lock(&tp->control);
+
+	if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
+		if (features & NETIF_F_HW_VLAN_CTAG_RX)
+			rtl_rx_vlan_en(tp, true);
+		else
+			rtl_rx_vlan_en(tp, false);
+	}
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
+}
+
+#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
+
+static u32 __rtl_get_wol(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u32 wolopts = 0;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+	if (ocp_data & LINK_ON_WAKE_EN)
+		wolopts |= WAKE_PHY;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+	if (ocp_data & UWF_EN)
+		wolopts |= WAKE_UCAST;
+	if (ocp_data & BWF_EN)
+		wolopts |= WAKE_BCAST;
+	if (ocp_data & MWF_EN)
+		wolopts |= WAKE_MCAST;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	if (ocp_data & MAGIC_EN)
+		wolopts |= WAKE_MAGIC;
+
+	return wolopts;
+}
+
+static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
+{
+	u32 ocp_data;
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+	ocp_data &= ~LINK_ON_WAKE_EN;
+	if (wolopts & WAKE_PHY)
+		ocp_data |= LINK_ON_WAKE_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+	ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN);
+	if (wolopts & WAKE_UCAST)
+		ocp_data |= UWF_EN;
+	if (wolopts & WAKE_BCAST)
+		ocp_data |= BWF_EN;
+	if (wolopts & WAKE_MCAST)
+		ocp_data |= MWF_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
+	ocp_data &= ~MAGIC_EN;
+	if (wolopts & WAKE_MAGIC)
+		ocp_data |= MAGIC_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+
+	if (wolopts & WAKE_ANY)
+		device_set_wakeup_enable(&tp->udev->dev, true);
+	else
+		device_set_wakeup_enable(&tp->udev->dev, false);
+}
+
+static void r8153_mac_clk_speed_down(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
+
+	/* MAC clock speed down */
+	if (enable)
+		ocp_data |= MAC_CLK_SPDWN_EN;
+	else
+		ocp_data &= ~MAC_CLK_SPDWN_EN;
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
+}
+
+static void r8156_mac_clk_spd(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	/* MAC clock speed down */
+	if (enable) {
+		/* aldps_spdwn_ratio, tp10_spdwn_ratio */
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL,
+			       0x0403);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
+		ocp_data &= ~EEE_SPDWN_RATIO_MASK;
+		ocp_data |= MAC_CLK_SPDWN_EN | 0x03; /* eee_spdwn_ratio */
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
+	} else {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
+		ocp_data &= ~MAC_CLK_SPDWN_EN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
+	}
+}
+
+static void r8153_u1u2en(struct r8152 *tp, bool enable)
+{
+	u8 u1u2[8];
+
+	if (enable)
+		memset(u1u2, 0xff, sizeof(u1u2));
+	else
+		memset(u1u2, 0x00, sizeof(u1u2));
+
+	usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
+}
+
+static void r8153b_u1u2en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG);
+	if (enable)
+		ocp_data |= LPM_U1U2_EN;
+	else
+		ocp_data &= ~LPM_U1U2_EN;
+
+	ocp_write_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG, ocp_data);
+}
+
+static void r8153_u2p3en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
+	if (enable)
+		ocp_data |= U2P3_ENABLE;
+	else
+		ocp_data &= ~U2P3_ENABLE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
+}
+
+static void r8153b_ups_flags(struct r8152 *tp)
+{
+	u32 ups_flags = 0;
+
+	if (tp->ups_info.green)
+		ups_flags |= UPS_FLAGS_EN_GREEN;
+
+	if (tp->ups_info.aldps)
+		ups_flags |= UPS_FLAGS_EN_ALDPS;
+
+	if (tp->ups_info.eee)
+		ups_flags |= UPS_FLAGS_EN_EEE;
+
+	if (tp->ups_info.flow_control)
+		ups_flags |= UPS_FLAGS_EN_FLOW_CTR;
+
+	if (tp->ups_info.eee_ckdiv)
+		ups_flags |= UPS_FLAGS_EN_EEE_CKDIV;
+
+	if (tp->ups_info.eee_cmod_lv)
+		ups_flags |= UPS_FLAGS_EEE_CMOD_LV_EN;
+
+	if (tp->ups_info.r_tune)
+		ups_flags |= UPS_FLAGS_R_TUNE;
+
+	if (tp->ups_info._10m_ckdiv)
+		ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
+
+	if (tp->ups_info.eee_plloff_100)
+		ups_flags |= UPS_FLAGS_EEE_PLLOFF_100;
+
+	if (tp->ups_info.eee_plloff_giga)
+		ups_flags |= UPS_FLAGS_EEE_PLLOFF_GIGA;
+
+	if (tp->ups_info._250m_ckdiv)
+		ups_flags |= UPS_FLAGS_250M_CKDIV;
+
+	if (tp->ups_info.ctap_short_off)
+		ups_flags |= UPS_FLAGS_CTAP_SHORT_DIS;
+
+	switch (tp->ups_info.speed_duplex) {
+	case NWAY_10M_HALF:
+		ups_flags |= ups_flags_speed(1);
+		break;
+	case NWAY_10M_FULL:
+		ups_flags |= ups_flags_speed(2);
+		break;
+	case NWAY_100M_HALF:
+		ups_flags |= ups_flags_speed(3);
+		break;
+	case NWAY_100M_FULL:
+		ups_flags |= ups_flags_speed(4);
+		break;
+	case NWAY_1000M_FULL:
+		ups_flags |= ups_flags_speed(5);
+		break;
+	case FORCE_10M_HALF:
+		ups_flags |= ups_flags_speed(6);
+		break;
+	case FORCE_10M_FULL:
+		ups_flags |= ups_flags_speed(7);
+		break;
+	case FORCE_100M_HALF:
+		ups_flags |= ups_flags_speed(8);
+		break;
+	case FORCE_100M_FULL:
+		ups_flags |= ups_flags_speed(9);
+		break;
+	default:
+		break;
+	}
+
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
+}
+
+static void r8156_ups_flags(struct r8152 *tp)
+{
+	u32 ups_flags = 0;
+
+	if (tp->ups_info.green)
+		ups_flags |= UPS_FLAGS_EN_GREEN;
+
+	if (tp->ups_info.aldps)
+		ups_flags |= UPS_FLAGS_EN_ALDPS;
+
+	if (tp->ups_info.eee)
+		ups_flags |= UPS_FLAGS_EN_EEE;
+
+	if (tp->ups_info.flow_control)
+		ups_flags |= UPS_FLAGS_EN_FLOW_CTR;
+
+	if (tp->ups_info.eee_ckdiv)
+		ups_flags |= UPS_FLAGS_EN_EEE_CKDIV;
+
+	if (tp->ups_info._10m_ckdiv)
+		ups_flags |= UPS_FLAGS_EN_10M_CKDIV;
+
+	if (tp->ups_info.eee_plloff_100)
+		ups_flags |= UPS_FLAGS_EEE_PLLOFF_100;
+
+	if (tp->ups_info.eee_plloff_giga)
+		ups_flags |= UPS_FLAGS_EEE_PLLOFF_GIGA;
+
+	if (tp->ups_info._250m_ckdiv)
+		ups_flags |= UPS_FLAGS_250M_CKDIV;
+
+	switch (tp->ups_info.speed_duplex) {
+	case FORCE_10M_HALF:
+		ups_flags |= ups_flags_speed(0);
+		break;
+	case FORCE_10M_FULL:
+		ups_flags |= ups_flags_speed(1);
+		break;
+	case FORCE_100M_HALF:
+		ups_flags |= ups_flags_speed(2);
+		break;
+	case FORCE_100M_FULL:
+		ups_flags |= ups_flags_speed(3);
+		break;
+	case NWAY_10M_HALF:
+		ups_flags |= ups_flags_speed(4);
+		break;
+	case NWAY_10M_FULL:
+		ups_flags |= ups_flags_speed(5);
+		break;
+	case NWAY_100M_HALF:
+		ups_flags |= ups_flags_speed(6);
+		break;
+	case NWAY_100M_FULL:
+		ups_flags |= ups_flags_speed(7);
+		break;
+	case NWAY_1000M_FULL:
+		ups_flags |= ups_flags_speed(8);
+		break;
+	case NWAY_2500M_FULL:
+		ups_flags |= ups_flags_speed(9);
+		break;
+	default:
+		break;
+	}
+
+	switch (tp->ups_info.lite_mode) {
+	case 1:
+		ups_flags |= 0 << 5;
+		break;
+	case 2:
+		ups_flags |= 2 << 5;
+		break;
+	case 0:
+	default:
+		ups_flags |= 1 << 5;
+		break;
+	}
+
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ups_flags);
+}
+
+static void rtl_green_en(struct r8152 *tp, bool enable)
+{
+	u16 data;
+
+	data = sram_read(tp, SRAM_GREEN_CFG);
+	if (enable)
+		data |= GREEN_ETH_EN;
+	else
+		data &= ~GREEN_ETH_EN;
+	sram_write(tp, SRAM_GREEN_CFG, data);
+
+	tp->ups_info.green = enable;
+}
+
+static void r8153b_green_en(struct r8152 *tp, bool enable)
+{
+	if (enable) {
+		sram_write(tp, 0x8045, 0);	/* 10M abiq&ldvbias */
+		sram_write(tp, 0x804d, 0x1222);	/* 100M short abiq&ldvbias */
+		sram_write(tp, 0x805d, 0x0022);	/* 1000M short abiq&ldvbias */
+	} else {
+		sram_write(tp, 0x8045, 0x2444);	/* 10M abiq&ldvbias */
+		sram_write(tp, 0x804d, 0x2444);	/* 100M short abiq&ldvbias */
+		sram_write(tp, 0x805d, 0x2444);	/* 1000M short abiq&ldvbias */
+	}
+
+	rtl_green_en(tp, true);
+}
+
+static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
+{
+	u16 data;
+	int i;
+
+	for (i = 0; i < 500; i++) {
+		data = ocp_reg_read(tp, OCP_PHY_STATUS);
+		data &= PHY_STAT_MASK;
+		if (desired) {
+			if (data == desired)
+				break;
+		} else if (data == PHY_STAT_LAN_ON || data == PHY_STAT_PWRDN ||
+			   data == PHY_STAT_EXT_INIT) {
+			break;
+		}
+
+		msleep(20);
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			break;
+	}
+
+	return data;
+}
+
+static void r8153b_ups_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
+
+	if (enable) {
+		r8153b_ups_flags(tp);
+
+		ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
+		ocp_data |= UPS_FORCE_PWR_DOWN;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+	} else {
+		ocp_data &= ~(UPS_EN | USP_PREWAKE);
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
+		ocp_data &= ~UPS_FORCE_PWR_DOWN;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+
+		if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
+			int i;
+
+			for (i = 0; i < 500; i++) {
+				if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+					return;
+				if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+				    AUTOLOAD_DONE)
+					break;
+				msleep(20);
+			}
+
+			tp->rtl_ops.hw_phy_cfg(tp);
+
+			rtl8152_set_speed(tp, tp->autoneg, tp->speed,
+					  tp->duplex, tp->advertising);
+		}
+	}
+}
+
+static void r8153c_ups_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
+
+	if (enable) {
+		r8153b_ups_flags(tp);
+
+		ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
+		ocp_data |= UPS_FORCE_PWR_DOWN;
+		ocp_data &= ~BIT(7);
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+	} else {
+		ocp_data &= ~(UPS_EN | USP_PREWAKE);
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
+		ocp_data &= ~UPS_FORCE_PWR_DOWN;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+
+		if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
+			int i;
+
+			for (i = 0; i < 500; i++) {
+				if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+					return;
+				if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+				    AUTOLOAD_DONE)
+					break;
+				msleep(20);
+			}
+
+			tp->rtl_ops.hw_phy_cfg(tp);
+
+			rtl8152_set_speed(tp, tp->autoneg, tp->speed,
+					  tp->duplex, tp->advertising);
+		}
+
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+		ocp_data |= BIT(8);
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	}
+}
+
+static void r8156_ups_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
+
+	if (enable) {
+		r8156_ups_flags(tp);
+
+		ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
+		ocp_data |= UPS_FORCE_PWR_DOWN;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+
+		switch (tp->version) {
+		case RTL_VER_13:
+		case RTL_VER_15:
+			ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPHY_XTAL);
+			ocp_data &= ~OOBS_POLLING;
+			ocp_write_byte(tp, MCU_TYPE_USB, USB_UPHY_XTAL, ocp_data);
+			break;
+		default:
+			break;
+		}
+	} else {
+		ocp_data &= ~(UPS_EN | USP_PREWAKE);
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
+		ocp_data &= ~UPS_FORCE_PWR_DOWN;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+
+		if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
+			tp->rtl_ops.hw_phy_cfg(tp);
+
+			rtl8152_set_speed(tp, tp->autoneg, tp->speed,
+					  tp->duplex, tp->advertising);
+		}
+	}
+}
+
+static void r8153_power_cut_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
+	if (enable)
+		ocp_data |= PWR_EN | PHASE2_EN;
+	else
+		ocp_data &= ~(PWR_EN | PHASE2_EN);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+	ocp_data &= ~PCUT_STATUS;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+}
+
+static void r8153b_power_cut_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
+	if (enable)
+		ocp_data |= PWR_EN | PHASE2_EN;
+	else
+		ocp_data &= ~PWR_EN;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+	ocp_data &= ~PCUT_STATUS;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+}
+
+static void r8153_queue_wake(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG);
+	if (enable)
+		ocp_data |= UPCOMING_RUNTIME_D3;
+	else
+		ocp_data &= ~UPCOMING_RUNTIME_D3;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_SUSPEND_FLAG);
+	ocp_data &= ~LINK_CHG_EVENT;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_SUSPEND_FLAG, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+	ocp_data &= ~LINK_CHANGE_FLAG;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+}
+
+static bool rtl_can_wakeup(struct r8152 *tp)
+{
+	struct usb_device *udev = tp->udev;
+
+	return (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP);
+}
+
+static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
+{
+	if (enable) {
+		u32 ocp_data;
+
+		__rtl_set_wol(tp, WAKE_ANY);
+
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+		ocp_data |= LINK_OFF_WAKE_EN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	} else {
+		u32 ocp_data;
+
+		__rtl_set_wol(tp, tp->saved_wolopts);
+
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+		ocp_data &= ~LINK_OFF_WAKE_EN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	}
+}
+
+static void rtl8153_runtime_enable(struct r8152 *tp, bool enable)
+{
+	if (enable) {
+		r8153_u1u2en(tp, false);
+		r8153_u2p3en(tp, false);
+		rtl_runtime_suspend_enable(tp, true);
+	} else {
+		rtl_runtime_suspend_enable(tp, false);
+
+		switch (tp->version) {
+		case RTL_VER_03:
+		case RTL_VER_04:
+			break;
+		case RTL_VER_05:
+		case RTL_VER_06:
+		default:
+			r8153_u2p3en(tp, true);
+			break;
+		}
+
+		r8153_u1u2en(tp, true);
+	}
+}
+
+static void rtl8153b_runtime_enable(struct r8152 *tp, bool enable)
+{
+	if (enable) {
+		r8153_queue_wake(tp, true);
+		r8153b_u1u2en(tp, false);
+		r8153_u2p3en(tp, false);
+		rtl_runtime_suspend_enable(tp, true);
+		r8153b_ups_en(tp, true);
+	} else {
+		r8153b_ups_en(tp, false);
+		r8153_queue_wake(tp, false);
+		rtl_runtime_suspend_enable(tp, false);
+		if (tp->udev->speed >= USB_SPEED_SUPER)
+			r8153b_u1u2en(tp, true);
+	}
+}
+
+static void rtl8153c_runtime_enable(struct r8152 *tp, bool enable)
+{
+	if (enable) {
+		r8153_queue_wake(tp, true);
+		r8153b_u1u2en(tp, false);
+		r8153_u2p3en(tp, false);
+		rtl_runtime_suspend_enable(tp, true);
+		r8153c_ups_en(tp, true);
+	} else {
+		r8153c_ups_en(tp, false);
+		r8153_queue_wake(tp, false);
+		rtl_runtime_suspend_enable(tp, false);
+		r8153b_u1u2en(tp, true);
+	}
+}
+
+static void rtl8156_runtime_enable(struct r8152 *tp, bool enable)
+{
+	if (enable) {
+		r8153_queue_wake(tp, true);
+		r8153b_u1u2en(tp, false);
+		r8153_u2p3en(tp, false);
+		rtl_runtime_suspend_enable(tp, true);
+	} else {
+		r8153_queue_wake(tp, false);
+		rtl_runtime_suspend_enable(tp, false);
+		r8153_u2p3en(tp, true);
+		if (tp->udev->speed >= USB_SPEED_SUPER)
+			r8153b_u1u2en(tp, true);
+	}
+}
+
+static void r8153_teredo_off(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+	case RTL_VER_07:
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+		ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK |
+			      OOB_TEREDO_EN);
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+		break;
+
+	case RTL_VER_08:
+	case RTL_VER_09:
+	case RTL_TEST_01:
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_14:
+	case RTL_VER_15:
+	default:
+		/* The bit 0 ~ 7 are relative with teredo settings. They are
+		 * W1C (write 1 to clear), so set all 1 to disable it.
+		 */
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff);
+		break;
+	}
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TEREDO_TIMER, 0);
+}
+
+static void rtl_reset_bmu(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
+	ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+	ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+}
+
+/* Clear the bp to stop the firmware before loading a new one */
+static void rtl_clear_bp(struct r8152 *tp, u16 type)
+{
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_07:
+		break;
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+		ocp_write_byte(tp, type, PLA_BP_EN, 0);
+		break;
+	case RTL_VER_14:
+		ocp_write_word(tp, type, USB_BP2_EN, 0);
+
+		ocp_write_word(tp, type, USB_BP_8, 0);
+		ocp_write_word(tp, type, USB_BP_9, 0);
+		ocp_write_word(tp, type, USB_BP_10, 0);
+		ocp_write_word(tp, type, USB_BP_11, 0);
+		ocp_write_word(tp, type, USB_BP_12, 0);
+		ocp_write_word(tp, type, USB_BP_13, 0);
+		ocp_write_word(tp, type, USB_BP_14, 0);
+		ocp_write_word(tp, type, USB_BP_15, 0);
+		break;
+	case RTL_VER_08:
+	case RTL_VER_09:
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_15:
+	default:
+		if (type == MCU_TYPE_USB) {
+			ocp_write_word(tp, MCU_TYPE_USB, USB_BP2_EN, 0);
+
+			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_8, 0);
+			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_9, 0);
+			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_10, 0);
+			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_11, 0);
+			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_12, 0);
+			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_13, 0);
+			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_14, 0);
+			ocp_write_word(tp, MCU_TYPE_USB, USB_BP_15, 0);
+		} else {
+			ocp_write_byte(tp, MCU_TYPE_PLA, PLA_BP_EN, 0);
+		}
+		break;
+	}
+
+	ocp_write_word(tp, type, PLA_BP_0, 0);
+	ocp_write_word(tp, type, PLA_BP_1, 0);
+	ocp_write_word(tp, type, PLA_BP_2, 0);
+	ocp_write_word(tp, type, PLA_BP_3, 0);
+	ocp_write_word(tp, type, PLA_BP_4, 0);
+	ocp_write_word(tp, type, PLA_BP_5, 0);
+	ocp_write_word(tp, type, PLA_BP_6, 0);
+	ocp_write_word(tp, type, PLA_BP_7, 0);
+
+	/* wait 3 ms to make sure the firmware is stopped */
+	usleep_range(3000, 6000);
+	ocp_write_word(tp, type, PLA_BP_BA, 0);
+}
+
+static inline void rtl_reset_ocp_base(struct r8152 *tp)
+{
+	tp->ocp_base = -1;
+}
+
+static int rtl_phy_patch_request(struct r8152 *tp, bool request, bool wait)
+{
+	u16 data, check;
+	int i;
+
+	data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
+	if (request) {
+		data |= PATCH_REQUEST;
+		check = 0;
+	} else {
+		data &= ~PATCH_REQUEST;
+		check = PATCH_READY;
+	}
+	ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
+
+	for (i = 0; wait && i < 5000; i++) {
+		u32 ocp_data;
+
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			return -ENODEV;
+
+		usleep_range(1000, 2000);
+		ocp_data = ocp_reg_read(tp, OCP_PHY_PATCH_STAT);
+		if ((ocp_data & PATCH_READY) ^ check)
+			break;
+	}
+
+	if (request && wait &&
+	    !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
+		dev_err(&tp->intf->dev, "PHY patch request fail\n");
+		rtl_phy_patch_request(tp, false, false);
+		return -ETIME;
+	} else {
+		return 0;
+	}
+}
+
+static void rtl_patch_key_set(struct r8152 *tp, u16 key_addr, u16 patch_key)
+{
+	if (patch_key && key_addr) {
+		sram_write(tp, key_addr, patch_key);
+		sram_write(tp, SRAM_PHY_LOCK, PHY_PATCH_LOCK);
+	} else if (key_addr) {
+		u16 data;
+
+		sram_write(tp, 0x0000, 0x0000);
+
+		data = ocp_reg_read(tp, OCP_PHY_LOCK);
+		data &= ~PATCH_LOCK;
+		ocp_reg_write(tp, OCP_PHY_LOCK, data);
+
+		sram_write(tp, key_addr, 0x0000);
+	} else {
+		WARN_ON_ONCE(1);
+	}
+}
+
+static int
+rtl_pre_ram_code(struct r8152 *tp, u16 key_addr, u16 patch_key, bool wait)
+{
+	if (rtl_phy_patch_request(tp, true, wait))
+		return -ETIME;
+
+	rtl_patch_key_set(tp, key_addr, patch_key);
+
+	return 0;
+}
+
+static int rtl_post_ram_code(struct r8152 *tp, u16 key_addr, bool wait)
+{
+	rtl_patch_key_set(tp, key_addr, 0);
+
+	rtl_phy_patch_request(tp, false, wait);
+
+	return 0;
+}
+
+static bool rtl8152_is_fw_phy_speed_up_ok(struct r8152 *tp, struct fw_phy_speed_up *phy)
+{
+	u16 fw_offset;
+	u32 length;
+	bool rc = false;
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+	case RTL_VER_07:
+	case RTL_VER_08:
+	case RTL_VER_09:
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_14:
+		goto out;
+	case RTL_VER_13:
+	case RTL_VER_15:
+	default:
+		break;
+	}
+
+	fw_offset = __le16_to_cpu(phy->fw_offset);
+	length = __le32_to_cpu(phy->blk_hdr.length);
+	if (fw_offset < sizeof(*phy) || length <= fw_offset) {
+		dev_err(&tp->intf->dev, "invalid fw_offset\n");
+		goto out;
+	}
+
+	length -= fw_offset;
+	if (length & 3) {
+		dev_err(&tp->intf->dev, "invalid block length\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(phy->fw_reg) != 0x9A00) {
+		dev_err(&tp->intf->dev, "invalid register to load firmware\n");
+		goto out;
+	}
+
+	rc = true;
+out:
+	return rc;
+}
+
+static bool rtl8152_is_fw_phy_ver_ok(struct r8152 *tp, struct fw_phy_ver *ver)
+{
+	bool rc = false;
+
+	switch (tp->version) {
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_15:
+		break;
+	default:
+		goto out;
+	}
+
+	if (__le32_to_cpu(ver->blk_hdr.length) != sizeof(*ver)) {
+		dev_err(&tp->intf->dev, "invalid block length\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(ver->ver.addr) != SRAM_GPHY_FW_VER) {
+		dev_err(&tp->intf->dev, "invalid phy ver addr\n");
+		goto out;
+	}
+
+	rc = true;
+out:
+	return rc;
+}
+
+static bool rtl8152_is_fw_phy_fixup_ok(struct r8152 *tp, struct fw_phy_fixup *fix)
+{
+	bool rc = false;
+
+	switch (tp->version) {
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_15:
+		break;
+	default:
+		goto out;
+	}
+
+	if (__le32_to_cpu(fix->blk_hdr.length) != sizeof(*fix)) {
+		dev_err(&tp->intf->dev, "invalid block length\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(fix->setting.addr) != OCP_PHY_PATCH_CMD ||
+	    __le16_to_cpu(fix->setting.data) != BIT(7)) {
+		dev_err(&tp->intf->dev, "invalid phy fixup\n");
+		goto out;
+	}
+
+	rc = true;
+out:
+	return rc;
+}
+
+static bool rtl8152_is_fw_phy_union_ok(struct r8152 *tp, struct fw_phy_union *phy)
+{
+	u16 fw_offset;
+	u32 length;
+	bool rc = false;
+
+	switch (tp->version) {
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_15:
+		break;
+	default:
+		goto out;
+	}
+
+	fw_offset = __le16_to_cpu(phy->fw_offset);
+	length = __le32_to_cpu(phy->blk_hdr.length);
+	if (fw_offset < sizeof(*phy) || length <= fw_offset) {
+		dev_err(&tp->intf->dev, "invalid fw_offset\n");
+		goto out;
+	}
+
+	length -= fw_offset;
+	if (length & 1) {
+		dev_err(&tp->intf->dev, "invalid block length\n");
+		goto out;
+	}
+
+	if (phy->pre_num > 2) {
+		dev_err(&tp->intf->dev, "invalid pre_num %d\n", phy->pre_num);
+		goto out;
+	}
+
+	if (phy->bp_num > 8) {
+		dev_err(&tp->intf->dev, "invalid bp_num %d\n", phy->bp_num);
+		goto out;
+	}
+
+	rc = true;
+out:
+	return rc;
+}
+
+static bool rtl8152_is_fw_phy_nc_ok(struct r8152 *tp, struct fw_phy_nc *phy)
+{
+	u32 length;
+	u16 fw_offset, fw_reg, ba_reg, patch_en_addr, mode_reg, bp_start;
+	bool rc = false;
+
+	switch (tp->version) {
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+		fw_reg = 0xa014;
+		ba_reg = 0xa012;
+		patch_en_addr = 0xa01a;
+		mode_reg = 0xb820;
+		bp_start = 0xa000;
+		break;
+	default:
+		goto out;
+	}
+
+	fw_offset = __le16_to_cpu(phy->fw_offset);
+	if (fw_offset < sizeof(*phy)) {
+		dev_err(&tp->intf->dev, "fw_offset too small\n");
+		goto out;
+	}
+
+	length = __le32_to_cpu(phy->blk_hdr.length);
+	if (length < fw_offset) {
+		dev_err(&tp->intf->dev, "invalid fw_offset\n");
+		goto out;
+	}
+
+	length -= __le16_to_cpu(phy->fw_offset);
+	if (!length || (length & 1)) {
+		dev_err(&tp->intf->dev, "invalid block length\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(phy->fw_reg) != fw_reg) {
+		dev_err(&tp->intf->dev, "invalid register to load firmware\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(phy->ba_reg) != ba_reg) {
+		dev_err(&tp->intf->dev, "invalid base address register\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(phy->patch_en_addr) != patch_en_addr) {
+		dev_err(&tp->intf->dev,
+			"invalid patch mode enabled register\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(phy->mode_reg) != mode_reg) {
+		dev_err(&tp->intf->dev,
+			"invalid register to switch the mode\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(phy->bp_start) != bp_start) {
+		dev_err(&tp->intf->dev,
+			"invalid start register of break point\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(phy->bp_num) > 4) {
+		dev_err(&tp->intf->dev, "invalid break point number\n");
+		goto out;
+	}
+
+	rc = true;
+out:
+	return rc;
+}
+
+static bool rtl8152_is_fw_mac_ok(struct r8152 *tp, struct fw_mac *mac)
+{
+	u16 fw_reg, bp_ba_addr, bp_en_addr, bp_start, fw_offset;
+	bool rc = false;
+	u32 length, type;
+	int i, max_bp;
+
+	type = __le32_to_cpu(mac->blk_hdr.type);
+	if (type == RTL_FW_PLA) {
+		switch (tp->version) {
+		case RTL_VER_01:
+		case RTL_VER_02:
+		case RTL_VER_07:
+			fw_reg = 0xf800;
+			bp_ba_addr = PLA_BP_BA;
+			bp_en_addr = 0;
+			bp_start = PLA_BP_0;
+			max_bp = 8;
+			break;
+		case RTL_VER_03:
+		case RTL_VER_04:
+		case RTL_VER_05:
+		case RTL_VER_06:
+		case RTL_VER_08:
+		case RTL_VER_09:
+		case RTL_VER_11:
+		case RTL_VER_12:
+		case RTL_VER_13:
+		case RTL_VER_15:
+			fw_reg = 0xf800;
+			bp_ba_addr = PLA_BP_BA;
+			bp_en_addr = PLA_BP_EN;
+			bp_start = PLA_BP_0;
+			max_bp = 8;
+			break;
+		case RTL_VER_14:
+			fw_reg = 0xf800;
+			bp_ba_addr = PLA_BP_BA;
+			bp_en_addr = USB_BP2_EN;
+			bp_start = PLA_BP_0;
+			max_bp = 16;
+			break;
+		default:
+			goto out;
+		}
+	} else if (type == RTL_FW_USB) {
+		switch (tp->version) {
+		case RTL_VER_03:
+		case RTL_VER_04:
+		case RTL_VER_05:
+		case RTL_VER_06:
+			fw_reg = 0xf800;
+			bp_ba_addr = USB_BP_BA;
+			bp_en_addr = USB_BP_EN;
+			bp_start = USB_BP_0;
+			max_bp = 8;
+			break;
+		case RTL_VER_08:
+		case RTL_VER_09:
+		case RTL_VER_11:
+		case RTL_VER_12:
+		case RTL_VER_13:
+		case RTL_VER_14:
+		case RTL_VER_15:
+			fw_reg = 0xe600;
+			bp_ba_addr = USB_BP_BA;
+			bp_en_addr = USB_BP2_EN;
+			bp_start = USB_BP_0;
+			max_bp = 16;
+			break;
+		case RTL_VER_01:
+		case RTL_VER_02:
+		case RTL_VER_07:
+		default:
+			goto out;
+		}
+	} else {
+		goto out;
+	}
+
+	fw_offset = __le16_to_cpu(mac->fw_offset);
+	if (fw_offset < sizeof(*mac)) {
+		dev_err(&tp->intf->dev, "fw_offset too small\n");
+		goto out;
+	}
+
+	length = __le32_to_cpu(mac->blk_hdr.length);
+	if (length < fw_offset) {
+		dev_err(&tp->intf->dev, "invalid fw_offset\n");
+		goto out;
+	}
+
+	length -= fw_offset;
+	if (length < 4 || (length & 3)) {
+		dev_err(&tp->intf->dev, "invalid block length\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(mac->fw_reg) != fw_reg) {
+		dev_err(&tp->intf->dev, "invalid register to load firmware\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(mac->bp_ba_addr) != bp_ba_addr) {
+		dev_err(&tp->intf->dev, "invalid base address register\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(mac->bp_en_addr) != bp_en_addr) {
+		dev_err(&tp->intf->dev, "invalid enabled mask register\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(mac->bp_start) != bp_start) {
+		dev_err(&tp->intf->dev,
+			"invalid start register of break point\n");
+		goto out;
+	}
+
+	if (__le16_to_cpu(mac->bp_num) > max_bp) {
+		dev_err(&tp->intf->dev, "invalid break point number\n");
+		goto out;
+	}
+
+	for (i = __le16_to_cpu(mac->bp_num); i < max_bp; i++) {
+		if (mac->bp[i]) {
+			dev_err(&tp->intf->dev, "unused bp%u is not zero\n", i);
+			goto out;
+		}
+	}
+
+	rc = true;
+out:
+	return rc;
+}
+
+/* Verify the checksum for the firmware file. It is calculated from the version
+ * field to the end of the file. Compare the result with the checksum field to
+ * make sure the file is correct.
+ */
+static long rtl8152_fw_verify_checksum(struct r8152 *tp,
+				       struct fw_header *fw_hdr, size_t size)
+{
+	unsigned char checksum[sizeof(fw_hdr->checksum)];
+	struct crypto_shash *alg;
+	struct shash_desc *sdesc;
+	size_t len;
+	long rc;
+
+	alg = crypto_alloc_shash("sha256", 0, 0);
+	if (IS_ERR(alg)) {
+		rc = PTR_ERR(alg);
+		goto out;
+	}
+
+	if (crypto_shash_digestsize(alg) != sizeof(fw_hdr->checksum)) {
+		rc = -EFAULT;
+		dev_err(&tp->intf->dev, "digestsize incorrect (%u)\n",
+			crypto_shash_digestsize(alg));
+		goto free_shash;
+	}
+
+	len = sizeof(*sdesc) + crypto_shash_descsize(alg);
+	sdesc = kmalloc(len, GFP_KERNEL);
+	if (!sdesc) {
+		rc = -ENOMEM;
+		goto free_shash;
+	}
+	sdesc->tfm = alg;
+
+	len = size - sizeof(fw_hdr->checksum);
+	rc = crypto_shash_digest(sdesc, fw_hdr->version, len, checksum);
+	kfree(sdesc);
+	if (rc)
+		goto free_shash;
+
+	if (memcmp(fw_hdr->checksum, checksum, sizeof(fw_hdr->checksum))) {
+		dev_err(&tp->intf->dev, "checksum fail\n");
+		rc = -EFAULT;
+	}
+
+free_shash:
+	crypto_free_shash(alg);
+out:
+	return rc;
+}
+
+static long rtl8152_check_firmware(struct r8152 *tp, struct rtl_fw *rtl_fw)
+{
+	const struct firmware *fw = rtl_fw->fw;
+	struct fw_header *fw_hdr = (struct fw_header *)fw->data;
+	unsigned long fw_flags = 0;
+	long ret = -EFAULT;
+	int i;
+
+	if (fw->size < sizeof(*fw_hdr)) {
+		dev_err(&tp->intf->dev, "file too small\n");
+		goto fail;
+	}
+
+	ret = rtl8152_fw_verify_checksum(tp, fw_hdr, fw->size);
+	if (ret)
+		goto fail;
+
+	ret = -EFAULT;
+
+	for (i = sizeof(*fw_hdr); i < fw->size;) {
+		struct fw_block *block = (struct fw_block *)&fw->data[i];
+		u32 type;
+
+		if ((i + sizeof(*block)) > fw->size)
+			goto fail;
+
+		type = __le32_to_cpu(block->type);
+		switch (type) {
+		case RTL_FW_END:
+			if (__le32_to_cpu(block->length) != sizeof(*block))
+				goto fail;
+			goto fw_end;
+		case RTL_FW_PLA:
+			if (test_bit(FW_FLAGS_PLA, &fw_flags)) {
+				dev_err(&tp->intf->dev,
+					"multiple PLA firmware encountered");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
+				dev_err(&tp->intf->dev,
+					"check PLA firmware failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_PLA, &fw_flags);
+			break;
+		case RTL_FW_USB:
+			if (test_bit(FW_FLAGS_USB, &fw_flags)) {
+				dev_err(&tp->intf->dev,
+					"multiple USB firmware encountered");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_mac_ok(tp, (struct fw_mac *)block)) {
+				dev_err(&tp->intf->dev,
+					"check USB firmware failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_USB, &fw_flags);
+			break;
+		case RTL_FW_PHY_START:
+			if (test_bit(FW_FLAGS_START, &fw_flags) ||
+			    test_bit(FW_FLAGS_NC, &fw_flags) ||
+			    test_bit(FW_FLAGS_NC1, &fw_flags) ||
+			    test_bit(FW_FLAGS_NC2, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
+				dev_err(&tp->intf->dev,
+					"check PHY_START fail\n");
+				goto fail;
+			}
+
+			if (__le32_to_cpu(block->length) != sizeof(struct fw_phy_patch_key)) {
+				dev_err(&tp->intf->dev,
+					"Invalid length for PHY_START\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_START, &fw_flags);
+			break;
+		case RTL_FW_PHY_STOP:
+			if (test_bit(FW_FLAGS_STOP, &fw_flags) ||
+			    !test_bit(FW_FLAGS_START, &fw_flags)) {
+				dev_err(&tp->intf->dev,
+					"Check PHY_STOP fail\n");
+				goto fail;
+			}
+
+			if (__le32_to_cpu(block->length) != sizeof(*block)) {
+				dev_err(&tp->intf->dev,
+					"Invalid length for PHY_STOP\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_STOP, &fw_flags);
+			break;
+		case RTL_FW_PHY_NC:
+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
+				dev_err(&tp->intf->dev,
+					"check PHY_NC fail\n");
+				goto fail;
+			}
+
+			if (test_bit(FW_FLAGS_NC, &fw_flags)) {
+				dev_err(&tp->intf->dev,
+					"multiple PHY NC encountered\n");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_phy_nc_ok(tp, (struct fw_phy_nc *)block)) {
+				dev_err(&tp->intf->dev,
+					"check PHY NC firmware failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_NC, &fw_flags);
+			break;
+		case RTL_FW_PHY_UNION_NC:
+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+			    test_bit(FW_FLAGS_NC1, &fw_flags) ||
+			    test_bit(FW_FLAGS_NC2, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
+				dev_err(&tp->intf->dev, "PHY_UNION_NC out of order\n");
+				goto fail;
+			}
+
+			if (test_bit(FW_FLAGS_NC, &fw_flags)) {
+				dev_err(&tp->intf->dev, "multiple PHY_UNION_NC encountered\n");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+				dev_err(&tp->intf->dev, "check PHY_UNION_NC failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_NC, &fw_flags);
+			break;
+		case RTL_FW_PHY_UNION_NC1:
+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+			    test_bit(FW_FLAGS_NC2, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
+				dev_err(&tp->intf->dev, "PHY_UNION_NC1 out of order\n");
+				goto fail;
+			}
+
+			if (test_bit(FW_FLAGS_NC1, &fw_flags)) {
+				dev_err(&tp->intf->dev, "multiple PHY NC1 encountered\n");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+				dev_err(&tp->intf->dev, "check PHY_UNION_NC1 failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_NC1, &fw_flags);
+			break;
+		case RTL_FW_PHY_UNION_NC2:
+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
+				dev_err(&tp->intf->dev, "PHY_UNION_NC2 out of order\n");
+				goto fail;
+			}
+
+			if (test_bit(FW_FLAGS_NC2, &fw_flags)) {
+				dev_err(&tp->intf->dev, "multiple PHY NC2 encountered\n");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+				dev_err(&tp->intf->dev, "check PHY_UNION_NC2 failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_NC2, &fw_flags);
+			break;
+		case RTL_FW_PHY_UNION_UC2:
+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
+				dev_err(&tp->intf->dev, "PHY_UNION_UC2 out of order\n");
+				goto fail;
+			}
+
+			if (test_bit(FW_FLAGS_UC2, &fw_flags)) {
+				dev_err(&tp->intf->dev, "multiple PHY UC2 encountered\n");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+				dev_err(&tp->intf->dev, "check PHY_UNION_UC2 failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_UC2, &fw_flags);
+			break;
+		case RTL_FW_PHY_UNION_UC:
+			if (!test_bit(FW_FLAGS_START, &fw_flags) ||
+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
+				dev_err(&tp->intf->dev, "PHY_UNION_UC out of order\n");
+				goto fail;
+			}
+
+			if (test_bit(FW_FLAGS_UC, &fw_flags)) {
+				dev_err(&tp->intf->dev, "multiple PHY UC encountered\n");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+				dev_err(&tp->intf->dev, "check PHY_UNION_UC failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_UC, &fw_flags);
+			break;
+		case RTL_FW_PHY_UNION_MISC:
+			if (!rtl8152_is_fw_phy_union_ok(tp, (struct fw_phy_union *)block)) {
+				dev_err(&tp->intf->dev, "check RTL_FW_PHY_UNION_MISC failed\n");
+				goto fail;
+			}
+			break;
+		case RTL_FW_PHY_FIXUP:
+			if (!rtl8152_is_fw_phy_fixup_ok(tp, (struct fw_phy_fixup *)block)) {
+				dev_err(&tp->intf->dev, "check PHY fixup failed\n");
+				goto fail;
+			}
+			break;
+		case RTL_FW_PHY_SPEED_UP:
+			if (test_bit(FW_FLAGS_SPEED_UP, &fw_flags)) {
+				dev_err(&tp->intf->dev, "multiple PHY firmware encountered");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_phy_speed_up_ok(tp, (struct fw_phy_speed_up *)block)) {
+				dev_err(&tp->intf->dev, "check PHY speed up failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_SPEED_UP, &fw_flags);
+			break;
+		case RTL_FW_PHY_VER:
+			if (test_bit(FW_FLAGS_START, &fw_flags) ||
+			    test_bit(FW_FLAGS_NC, &fw_flags) ||
+			    test_bit(FW_FLAGS_NC1, &fw_flags) ||
+			    test_bit(FW_FLAGS_NC2, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC2, &fw_flags) ||
+			    test_bit(FW_FLAGS_UC, &fw_flags) ||
+			    test_bit(FW_FLAGS_STOP, &fw_flags)) {
+				dev_err(&tp->intf->dev, "Invalid order to set PHY version\n");
+				goto fail;
+			}
+
+			if (test_bit(FW_FLAGS_VER, &fw_flags)) {
+				dev_err(&tp->intf->dev, "multiple PHY version encountered");
+				goto fail;
+			}
+
+			if (!rtl8152_is_fw_phy_ver_ok(tp, (struct fw_phy_ver *)block)) {
+				dev_err(&tp->intf->dev, "check PHY version failed\n");
+				goto fail;
+			}
+			__set_bit(FW_FLAGS_VER, &fw_flags);
+			break;
+		default:
+			dev_warn(&tp->intf->dev, "Unknown type %u is found\n",
+				 type);
+			break;
+		}
+
+		/* next block */
+		i += ALIGN(__le32_to_cpu(block->length), 8);
+	}
+
+fw_end:
+	if (test_bit(FW_FLAGS_START, &fw_flags) && !test_bit(FW_FLAGS_STOP, &fw_flags)) {
+		dev_err(&tp->intf->dev, "without PHY_STOP\n");
+		goto fail;
+	}
+
+	return 0;
+fail:
+	return ret;
+}
+
+static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy, bool wait)
+{
+	u32 len;
+	u8 *data;
+
+	rtl_reset_ocp_base(tp);
+
+	if (sram_read(tp, SRAM_GPHY_FW_VER) >= __le16_to_cpu(phy->version)) {
+		dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
+		return;
+	}
+
+	len = __le32_to_cpu(phy->blk_hdr.length);
+	len -= __le16_to_cpu(phy->fw_offset);
+	data = (u8 *)phy + __le16_to_cpu(phy->fw_offset);
+
+	if (rtl_phy_patch_request(tp, true, wait))
+		return;
+
+	while (len) {
+		u32 ocp_data, size;
+		int i;
+
+		if (len < 2048)
+			size = len;
+		else
+			size = 2048;
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL);
+		ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data);
+
+		generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB);
+
+		data += size;
+		len -= size;
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL);
+		ocp_data |= POL_GPHY_PATCH;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data);
+
+		for (i = 0; i < 1000; i++) {
+			if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH))
+				break;
+		}
+
+		if (i == 1000) {
+			dev_err(&tp->intf->dev, "ram code speedup mode timeout\n");
+			break;
+		}
+	}
+
+	rtl_reset_ocp_base(tp);
+
+	rtl_phy_patch_request(tp, false, wait);
+
+	if (sram_read(tp, SRAM_GPHY_FW_VER) == __le16_to_cpu(phy->version))
+		dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
+	else
+		dev_err(&tp->intf->dev, "ram code speedup mode fail\n");
+}
+
+static int rtl8152_fw_phy_ver(struct r8152 *tp, struct fw_phy_ver *phy_ver)
+{
+	u16 ver_addr, ver;
+
+	ver_addr = __le16_to_cpu(phy_ver->ver.addr);
+	ver = __le16_to_cpu(phy_ver->ver.data);
+
+	rtl_reset_ocp_base(tp);
+
+	if (sram_read(tp, ver_addr) >= ver) {
+		dev_dbg(&tp->intf->dev, "PHY firmware has been the newest\n");
+		return 0;
+	}
+
+	sram_write(tp, ver_addr, ver);
+
+	dev_dbg(&tp->intf->dev, "PHY firmware version %x\n", ver);
+
+	return ver;
+}
+
+static void rtl8152_fw_phy_fixup(struct r8152 *tp, struct fw_phy_fixup *fix)
+{
+	u16 addr, data;
+
+	rtl_reset_ocp_base(tp);
+
+	addr = __le16_to_cpu(fix->setting.addr);
+	data = ocp_reg_read(tp, addr);
+
+	switch (__le16_to_cpu(fix->bit_cmd)) {
+	case FW_FIXUP_AND:
+		data &= __le16_to_cpu(fix->setting.data);
+		break;
+	case FW_FIXUP_OR:
+		data |= __le16_to_cpu(fix->setting.data);
+		break;
+	case FW_FIXUP_NOT:
+		data &= ~__le16_to_cpu(fix->setting.data);
+		break;
+	case FW_FIXUP_XOR:
+		data ^= __le16_to_cpu(fix->setting.data);
+		break;
+	default:
+		return;
+	}
+
+	ocp_reg_write(tp, addr, data);
+
+	dev_dbg(&tp->intf->dev, "applied ocp %x %x\n", addr, data);
+}
+
+static void rtl8152_fw_phy_union_apply(struct r8152 *tp, struct fw_phy_union *phy)
+{
+	__le16 *data;
+	u32 length;
+	int i, num;
+
+	rtl_reset_ocp_base(tp);
+
+	num = phy->pre_num;
+	for (i = 0; i < num; i++)
+		sram_write(tp, __le16_to_cpu(phy->pre_set[i].addr),
+			   __le16_to_cpu(phy->pre_set[i].data));
+
+	length = __le32_to_cpu(phy->blk_hdr.length);
+	length -= __le16_to_cpu(phy->fw_offset);
+	num = length / 2;
+	data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
+
+	ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
+	for (i = 0; i < num; i++)
+		ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
+
+	num = phy->bp_num;
+	for (i = 0; i < num; i++)
+		sram_write(tp, __le16_to_cpu(phy->bp[i].addr), __le16_to_cpu(phy->bp[i].data));
+
+	if (phy->bp_num && phy->bp_en.addr)
+		sram_write(tp, __le16_to_cpu(phy->bp_en.addr), __le16_to_cpu(phy->bp_en.data));
+
+	dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
+}
+
+static void rtl8152_fw_phy_nc_apply(struct r8152 *tp, struct fw_phy_nc *phy)
+{
+	u16 mode_reg, bp_index;
+	u32 length, i, num;
+	__le16 *data;
+
+	rtl_reset_ocp_base(tp);
+
+	mode_reg = __le16_to_cpu(phy->mode_reg);
+	sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_pre));
+	sram_write(tp, __le16_to_cpu(phy->ba_reg),
+		   __le16_to_cpu(phy->ba_data));
+
+	length = __le32_to_cpu(phy->blk_hdr.length);
+	length -= __le16_to_cpu(phy->fw_offset);
+	num = length / 2;
+	data = (__le16 *)((u8 *)phy + __le16_to_cpu(phy->fw_offset));
+
+	ocp_reg_write(tp, OCP_SRAM_ADDR, __le16_to_cpu(phy->fw_reg));
+	for (i = 0; i < num; i++)
+		ocp_reg_write(tp, OCP_SRAM_DATA, __le16_to_cpu(data[i]));
+
+	sram_write(tp, __le16_to_cpu(phy->patch_en_addr),
+		   __le16_to_cpu(phy->patch_en_value));
+
+	bp_index = __le16_to_cpu(phy->bp_start);
+	num = __le16_to_cpu(phy->bp_num);
+	for (i = 0; i < num; i++) {
+		sram_write(tp, bp_index, __le16_to_cpu(phy->bp[i]));
+		bp_index += 2;
+	}
+
+	sram_write(tp, mode_reg, __le16_to_cpu(phy->mode_post));
+
+	dev_dbg(&tp->intf->dev, "successfully applied %s\n", phy->info);
+}
+
+static void rtl8152_fw_mac_apply(struct r8152 *tp, struct fw_mac *mac)
+{
+	u16 bp_en_addr, bp_index, type, bp_num, fw_ver_reg;
+	u32 length;
+	u8 *data;
+	int i;
+
+	switch (__le32_to_cpu(mac->blk_hdr.type)) {
+	case RTL_FW_PLA:
+		type = MCU_TYPE_PLA;
+		break;
+	case RTL_FW_USB:
+		type = MCU_TYPE_USB;
+		break;
+	default:
+		return;
+	}
+
+	fw_ver_reg = __le16_to_cpu(mac->fw_ver_reg);
+	if (fw_ver_reg && ocp_read_byte(tp, MCU_TYPE_USB, fw_ver_reg) >= mac->fw_ver_data) {
+		dev_dbg(&tp->intf->dev, "%s firmware has been the newest\n", type ? "PLA" : "USB");
+		return;
+	}
+
+	rtl_clear_bp(tp, type);
+
+	/* Enable backup/restore of MACDBG. This is required after clearing PLA
+	 * break points and before applying the PLA firmware.
+	 */
+	if (tp->version == RTL_VER_04 && type == MCU_TYPE_PLA &&
+	    !(ocp_read_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST) & DEBUG_OE)) {
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_PRE, DEBUG_LTSSM);
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MACDBG_POST, DEBUG_LTSSM);
+	}
+
+	length = __le32_to_cpu(mac->blk_hdr.length);
+	length -= __le16_to_cpu(mac->fw_offset);
+
+	data = (u8 *)mac;
+	data += __le16_to_cpu(mac->fw_offset);
+
+	generic_ocp_write(tp, __le16_to_cpu(mac->fw_reg), 0xff, length, data,
+			  type);
+
+	ocp_write_word(tp, type, __le16_to_cpu(mac->bp_ba_addr),
+		       __le16_to_cpu(mac->bp_ba_value));
+
+	bp_index = __le16_to_cpu(mac->bp_start);
+	bp_num = __le16_to_cpu(mac->bp_num);
+	for (i = 0; i < bp_num; i++) {
+		ocp_write_word(tp, type, bp_index, __le16_to_cpu(mac->bp[i]));
+		bp_index += 2;
+	}
+
+	bp_en_addr = __le16_to_cpu(mac->bp_en_addr);
+	if (bp_en_addr)
+		ocp_write_word(tp, type, bp_en_addr,
+			       __le16_to_cpu(mac->bp_en_value));
+
+	if (fw_ver_reg)
+		ocp_write_byte(tp, MCU_TYPE_USB, fw_ver_reg,
+			       mac->fw_ver_data);
+
+	dev_dbg(&tp->intf->dev, "successfully applied %s\n", mac->info);
+}
+
+static void rtl8152_apply_firmware(struct r8152 *tp, bool power_cut)
+{
+	struct rtl_fw *rtl_fw = &tp->rtl_fw;
+	const struct firmware *fw;
+	struct fw_header *fw_hdr;
+	struct fw_phy_patch_key *key;
+	u16 key_addr = 0;
+	int i, patch_phy = 1;
+
+	if (IS_ERR_OR_NULL(rtl_fw->fw))
+		return;
+
+	fw = rtl_fw->fw;
+	fw_hdr = (struct fw_header *)fw->data;
+
+	if (rtl_fw->pre_fw)
+		rtl_fw->pre_fw(tp);
+
+	for (i = offsetof(struct fw_header, blocks); i < fw->size;) {
+		struct fw_block *block = (struct fw_block *)&fw->data[i];
+
+		switch (__le32_to_cpu(block->type)) {
+		case RTL_FW_END:
+			goto post_fw;
+		case RTL_FW_PLA:
+		case RTL_FW_USB:
+			rtl8152_fw_mac_apply(tp, (struct fw_mac *)block);
+			break;
+		case RTL_FW_PHY_START:
+			if (!patch_phy)
+				break;
+			key = (struct fw_phy_patch_key *)block;
+			key_addr = __le16_to_cpu(key->key_reg);
+			rtl_pre_ram_code(tp, key_addr, __le16_to_cpu(key->key_data), !power_cut);
+			break;
+		case RTL_FW_PHY_STOP:
+			if (!patch_phy)
+				break;
+			WARN_ON(!key_addr);
+			rtl_post_ram_code(tp, key_addr, !power_cut);
+			break;
+		case RTL_FW_PHY_NC:
+			rtl8152_fw_phy_nc_apply(tp, (struct fw_phy_nc *)block);
+			break;
+		case RTL_FW_PHY_VER:
+			patch_phy = rtl8152_fw_phy_ver(tp, (struct fw_phy_ver *)block);
+			break;
+		case RTL_FW_PHY_UNION_NC:
+		case RTL_FW_PHY_UNION_NC1:
+		case RTL_FW_PHY_UNION_NC2:
+		case RTL_FW_PHY_UNION_UC2:
+		case RTL_FW_PHY_UNION_UC:
+		case RTL_FW_PHY_UNION_MISC:
+			if (patch_phy)
+				rtl8152_fw_phy_union_apply(tp, (struct fw_phy_union *)block);
+			break;
+		case RTL_FW_PHY_FIXUP:
+			if (patch_phy)
+				rtl8152_fw_phy_fixup(tp, (struct fw_phy_fixup *)block);
+			break;
+		case RTL_FW_PHY_SPEED_UP:
+			rtl_ram_code_speed_up(tp, (struct fw_phy_speed_up *)block, !power_cut);
+			break;
+		default:
+			break;
+		}
+
+		i += ALIGN(__le32_to_cpu(block->length), 8);
+	}
+
+post_fw:
+	if (rtl_fw->post_fw)
+		rtl_fw->post_fw(tp);
+
+	rtl_reset_ocp_base(tp);
+	strscpy(rtl_fw->version, fw_hdr->version, RTL_VER_SIZE);
+	dev_info(&tp->intf->dev, "load %s successfully\n", rtl_fw->version);
+}
+
+static void rtl8152_release_firmware(struct r8152 *tp)
+{
+	struct rtl_fw *rtl_fw = &tp->rtl_fw;
+
+	if (!IS_ERR_OR_NULL(rtl_fw->fw)) {
+		release_firmware(rtl_fw->fw);
+		rtl_fw->fw = NULL;
+	}
+}
+
+static int rtl8152_request_firmware(struct r8152 *tp)
+{
+	struct rtl_fw *rtl_fw = &tp->rtl_fw;
+	long rc;
+
+	if (rtl_fw->fw || !rtl_fw->fw_name) {
+		dev_info(&tp->intf->dev, "skip request firmware\n");
+		rc = 0;
+		goto result;
+	}
+
+	rc = request_firmware(&rtl_fw->fw, rtl_fw->fw_name, &tp->intf->dev);
+	if (rc < 0)
+		goto result;
+
+	rc = rtl8152_check_firmware(tp, rtl_fw);
+	if (rc < 0)
+		release_firmware(rtl_fw->fw);
+
+result:
+	if (rc) {
+		rtl_fw->fw = ERR_PTR(rc);
+
+		dev_warn(&tp->intf->dev,
+			 "unable to load firmware patch %s (%ld)\n",
+			 rtl_fw->fw_name, rc);
+	}
+
+	return rc;
+}
+
+static void r8152_aldps_en(struct r8152 *tp, bool enable)
+{
+	if (enable) {
+		ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPWRSAVE | ENPDNPS |
+						    LINKENA | DIS_SDSAVE);
+	} else {
+		ocp_reg_write(tp, OCP_ALDPS_CONFIG, ENPDNPS | LINKENA |
+						    DIS_SDSAVE);
+		msleep(20);
+	}
+}
+
+static inline void r8152_mmd_indirect(struct r8152 *tp, u16 dev, u16 reg)
+{
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | dev);
+	ocp_reg_write(tp, OCP_EEE_DATA, reg);
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | dev);
+}
+
+static u16 r8152_mmd_read(struct r8152 *tp, u16 dev, u16 reg)
+{
+	u16 data;
+
+	r8152_mmd_indirect(tp, dev, reg);
+	data = ocp_reg_read(tp, OCP_EEE_DATA);
+	ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
+
+	return data;
+}
+
+static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data)
+{
+	r8152_mmd_indirect(tp, dev, reg);
+	ocp_reg_write(tp, OCP_EEE_DATA, data);
+	ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
+}
+
+static void r8152_eee_en(struct r8152 *tp, bool enable)
+{
+	u16 config1, config2, config3;
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask;
+	config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2);
+	config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask;
+
+	if (enable) {
+		ocp_data |= EEE_RX_EN | EEE_TX_EN;
+		config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN;
+		config1 |= sd_rise_time(1);
+		config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN;
+		config3 |= fast_snr(42);
+	} else {
+		ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
+		config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN |
+			     RX_QUIET_EN);
+		config1 |= sd_rise_time(7);
+		config2 &= ~(RG_DACQUIET_EN | RG_LDVQUIET_EN);
+		config3 |= fast_snr(511);
+	}
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
+	ocp_reg_write(tp, OCP_EEE_CONFIG1, config1);
+	ocp_reg_write(tp, OCP_EEE_CONFIG2, config2);
+	ocp_reg_write(tp, OCP_EEE_CONFIG3, config3);
+}
+
+static void r8153_eee_en(struct r8152 *tp, bool enable)
+{
+	u32 ocp_data;
+	u16 config;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	config = ocp_reg_read(tp, OCP_EEE_CFG);
+
+	if (enable) {
+		ocp_data |= EEE_RX_EN | EEE_TX_EN;
+		config |= EEE10_EN;
+	} else {
+		ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
+		config &= ~EEE10_EN;
+	}
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
+	ocp_reg_write(tp, OCP_EEE_CFG, config);
+
+	tp->ups_info.eee = enable;
+}
+
+static void r8156_eee_en(struct r8152 *tp, bool enable)
+{
+	u16 config;
+
+	r8153_eee_en(tp, enable);
+
+	config = ocp_reg_read(tp, OCP_EEE_ADV2);
+
+	if (enable)
+		config |= MDIO_EEE_2_5GT;
+	else
+		config &= ~MDIO_EEE_2_5GT;
+
+	ocp_reg_write(tp, OCP_EEE_ADV2, config);
+}
+
+static void rtl_eee_enable(struct r8152 *tp, bool enable)
+{
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_07:
+		if (enable) {
+			r8152_eee_en(tp, true);
+			r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
+					tp->eee_adv);
+		} else {
+			r8152_eee_en(tp, false);
+			r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
+		}
+		break;
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+	case RTL_VER_08:
+	case RTL_VER_09:
+	case RTL_VER_14:
+		if (enable) {
+			r8153_eee_en(tp, true);
+			ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
+		} else {
+			r8153_eee_en(tp, false);
+			ocp_reg_write(tp, OCP_EEE_ADV, 0);
+		}
+		break;
+	case RTL_VER_10:
+	case RTL_VER_11:
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_15:
+		if (enable) {
+			r8156_eee_en(tp, true);
+			ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
+		} else {
+			r8156_eee_en(tp, false);
+			ocp_reg_write(tp, OCP_EEE_ADV, 0);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void r8152b_enable_fc(struct r8152 *tp)
+{
+	u16 anar;
+
+	anar = r8152_mdio_read(tp, MII_ADVERTISE);
+	anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+	r8152_mdio_write(tp, MII_ADVERTISE, anar);
+
+	tp->ups_info.flow_control = true;
+}
+
+static void rtl8152_disable(struct r8152 *tp)
+{
+	r8152_aldps_en(tp, false);
+	rtl_disable(tp);
+	r8152_aldps_en(tp, true);
+}
+
+static void r8152b_hw_phy_cfg(struct r8152 *tp)
+{
+	rtl8152_apply_firmware(tp, false);
+	rtl_eee_enable(tp, tp->eee_en);
+	r8152_aldps_en(tp, true);
+	r8152b_enable_fc(tp);
+
+	set_bit(PHY_RESET, &tp->flags);
+}
+
+static void wait_oob_link_list_ready(struct r8152 *tp)
+{
+	u32 ocp_data;
+	int i;
+
+	for (i = 0; i < 1000; i++) {
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			break;
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+		if (ocp_data & LINK_LIST_READY)
+			break;
+		usleep_range(1000, 2000);
+	}
+}
+
+static void r8156b_wait_loading_flash(struct r8152 *tp)
+{
+	if ((ocp_read_word(tp, MCU_TYPE_PLA, PLA_GPHY_CTRL) & GPHY_FLASH) &&
+	    !(ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & BYPASS_FLASH)) {
+		int i;
+
+		for (i = 0; i < 100; i++) {
+			if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+				break;
+			if (ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL) & GPHY_PATCH_DONE)
+				break;
+			usleep_range(1000, 2000);
+		}
+	}
+}
+
+static void r8152b_exit_oob(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	rxdy_gated_en(tp, true);
+	r8153_teredo_off(tp);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data &= ~MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	wait_oob_link_list_ready(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	wait_oob_link_list_ready(tp);
+
+	rtl8152_nic_reset(tp);
+
+	/* rx share fifo credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
+
+	if (tp->udev->speed == USB_SPEED_FULL ||
+	    tp->udev->speed == USB_SPEED_LOW) {
+		/* rx share fifo credit near full threshold */
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
+				RXFIFO_THR2_FULL);
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
+				RXFIFO_THR3_FULL);
+	} else {
+		/* rx share fifo credit near full threshold */
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1,
+				RXFIFO_THR2_HIGH);
+		ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2,
+				RXFIFO_THR3_HIGH);
+	}
+
+	/* TX share fifo free credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
+
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_TX_AGG, TX_AGG_MAX_THRESHOLD);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_HIGH);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_TX_DMA,
+			TEST_MODE_DISABLE | TX_SIZE_ADJUST1);
+
+	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+	ocp_data |= TCR0_AUTO_FIFO;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+}
+
+static void r8152b_enter_oob(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
+
+	rtl_disable(tp);
+
+	wait_oob_link_list_ready(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	wait_oob_link_list_ready(tp);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
+
+	rtl_rx_vlan_en(tp, true);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR);
+	ocp_data |= ALDPS_PROXY_MODE;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	rxdy_gated_en(tp, false);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+}
+
+static int r8153_pre_firmware_1(struct r8152 *tp)
+{
+	int i;
+
+	/* Wait till the WTD timer is ready. It would take at most 104 ms. */
+	for (i = 0; i < 104; i++) {
+		u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_WDT1_CTRL);
+
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			return -ENODEV;
+		if (!(ocp_data & WTD1_EN))
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	return 0;
+}
+
+static int r8153_post_firmware_1(struct r8152 *tp)
+{
+	/* set USB_BP_4 to support USB_SPEED_SUPER only */
+	if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER)
+		ocp_write_word(tp, MCU_TYPE_USB, USB_BP_4, BP4_SUPER_ONLY);
+
+	/* reset UPHY timer to 36 ms */
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
+
+	return 0;
+}
+
+static int r8153_pre_firmware_2(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	r8153_pre_firmware_1(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
+	ocp_data &= ~FW_FIX_SUSPEND;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+
+	return 0;
+}
+
+static int r8153_post_firmware_2(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	/* enable bp0 if support USB_SPEED_SUPER only */
+	if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
+		ocp_data |= BIT(0);
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
+	}
+
+	/* reset UPHY timer to 36 ms */
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
+
+	/* enable U3P3 check, set the counter to 4 */
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, U3P3_CHECK_EN | 4);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
+	ocp_data |= FW_FIX_SUSPEND;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+	ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+
+	return 0;
+}
+
+static int r8153_post_firmware_3(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+	ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+	ocp_data |= FW_IP_RESET_EN;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+
+	return 0;
+}
+
+static int r8153b_pre_firmware_1(struct r8152 *tp)
+{
+	/* enable fc timer and set timer to 1 second. */
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
+		       CTRL_TIMER_EN | (1000 / 8));
+
+	return 0;
+}
+
+static int r8153b_post_firmware_1(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	/* enable bp0 for RTL8153-BND */
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+	if (ocp_data & BND_MASK) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
+		ocp_data |= BIT(0);
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
+	ocp_data |= FLOW_CTRL_PATCH_OPT;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+	ocp_data |= FC_PATCH_TASK;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+	ocp_data |= FW_IP_RESET_EN;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+
+	return 0;
+}
+
+static int r8153c_post_firmware_1(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
+	ocp_data |= FLOW_CTRL_PATCH_2;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+	ocp_data |= FC_PATCH_TASK;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+
+	return 0;
+}
+
+static int r8156a_post_firmware_1(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
+	ocp_data |= FW_IP_RESET_EN;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+
+	/* Modify U3PHY parameter for compatibility issue */
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4001acc9);
+
+	return 0;
+}
+
+static void r8153_aldps_en(struct r8152 *tp, bool enable)
+{
+	u16 data;
+
+	data = ocp_reg_read(tp, OCP_POWER_CFG);
+	if (enable) {
+		data |= EN_ALDPS;
+		ocp_reg_write(tp, OCP_POWER_CFG, data);
+	} else {
+		int i;
+
+		data &= ~EN_ALDPS;
+		ocp_reg_write(tp, OCP_POWER_CFG, data);
+		for (i = 0; i < 20; i++) {
+			if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+				return;
+			usleep_range(1000, 2000);
+			if (ocp_read_word(tp, MCU_TYPE_PLA, 0xe000) & 0x0100)
+				break;
+		}
+	}
+
+	tp->ups_info.aldps = enable;
+}
+
+static void r8153_hw_phy_cfg(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+
+	/* disable ALDPS before updating the PHY parameters */
+	r8153_aldps_en(tp, false);
+
+	/* disable EEE before updating the PHY parameters */
+	rtl_eee_enable(tp, false);
+
+	rtl8152_apply_firmware(tp, false);
+
+	if (tp->version == RTL_VER_03) {
+		data = ocp_reg_read(tp, OCP_EEE_CFG);
+		data &= ~CTAP_SHORT_EN;
+		ocp_reg_write(tp, OCP_EEE_CFG, data);
+	}
+
+	data = ocp_reg_read(tp, OCP_POWER_CFG);
+	data |= EEE_CLKDIV_EN;
+	ocp_reg_write(tp, OCP_POWER_CFG, data);
+
+	data = ocp_reg_read(tp, OCP_DOWN_SPEED);
+	data |= EN_10M_BGOFF;
+	ocp_reg_write(tp, OCP_DOWN_SPEED, data);
+	data = ocp_reg_read(tp, OCP_POWER_CFG);
+	data |= EN_10M_PLLOFF;
+	ocp_reg_write(tp, OCP_POWER_CFG, data);
+	sram_write(tp, SRAM_IMPEDANCE, 0x0b13);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data |= PFM_PWM_SWITCH;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+
+	/* Enable LPF corner auto tune */
+	sram_write(tp, SRAM_LPF_CFG, 0xf70f);
+
+	/* Adjust 10M Amplitude */
+	sram_write(tp, SRAM_10M_AMP1, 0x00af);
+	sram_write(tp, SRAM_10M_AMP2, 0x0208);
+
+	if (tp->eee_en)
+		rtl_eee_enable(tp, true);
+
+	r8153_aldps_en(tp, true);
+	r8152b_enable_fc(tp);
+
+	switch (tp->version) {
+	case RTL_VER_03:
+	case RTL_VER_04:
+		break;
+	case RTL_VER_05:
+	case RTL_VER_06:
+	default:
+		r8153_u2p3en(tp, true);
+		break;
+	}
+
+	set_bit(PHY_RESET, &tp->flags);
+}
+
+static u32 r8152_efuse_read(struct r8152 *tp, u8 addr)
+{
+	u32 ocp_data;
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD, EFUSE_READ_CMD | addr);
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD);
+	ocp_data = (ocp_data & EFUSE_DATA_BIT16) << 9;	/* data of bit16 */
+	ocp_data |= ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_DATA);
+
+	return ocp_data;
+}
+
+static void r8153b_hw_phy_cfg(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+	if (ocp_data & PCUT_STATUS) {
+		ocp_data &= ~PCUT_STATUS;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+	}
+
+	/* disable ALDPS before updating the PHY parameters */
+	r8153_aldps_en(tp, false);
+
+	/* disable EEE before updating the PHY parameters */
+	rtl_eee_enable(tp, false);
+
+	/* U1/U2/L1 idle timer. 500 us */
+	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
+
+	data = r8153_phy_status(tp, 0);
+
+	switch (data) {
+	case PHY_STAT_PWRDN:
+	case PHY_STAT_EXT_INIT:
+		rtl8152_apply_firmware(tp, true);
+
+		data = r8152_mdio_read(tp, MII_BMCR);
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+		break;
+	case PHY_STAT_LAN_ON:
+	default:
+		rtl8152_apply_firmware(tp, false);
+		break;
+	}
+
+	r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
+
+	data = sram_read(tp, SRAM_GREEN_CFG);
+	data |= R_TUNE_EN;
+	sram_write(tp, SRAM_GREEN_CFG, data);
+	data = ocp_reg_read(tp, OCP_NCTL_CFG);
+	data |= PGA_RETURN_EN;
+	ocp_reg_write(tp, OCP_NCTL_CFG, data);
+
+	/* ADC Bias Calibration:
+	 * read efuse offset 0x7d to get a 17-bit data. Remove the dummy/fake
+	 * bit (bit3) to rebuild the real 16-bit data. Write the data to the
+	 * ADC ioffset.
+	 */
+	ocp_data = r8152_efuse_read(tp, 0x7d);
+	data = (u16)(((ocp_data & 0x1fff0) >> 1) | (ocp_data & 0x7));
+	if (data != 0xffff)
+		ocp_reg_write(tp, OCP_ADC_IOFFSET, data);
+
+	/* ups mode tx-link-pulse timing adjustment:
+	 * rg_saw_cnt = OCP reg 0xC426 Bit[13:0]
+	 * swr_cnt_1ms_ini = 16000000 / rg_saw_cnt
+	 */
+	ocp_data = ocp_reg_read(tp, 0xc426);
+	ocp_data &= 0x3fff;
+	if (ocp_data) {
+		u32 swr_cnt_1ms_ini;
+
+		swr_cnt_1ms_ini = (16000000 / ocp_data) & SAW_CNT_1MS_MASK;
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG);
+		ocp_data = (ocp_data & ~SAW_CNT_1MS_MASK) | swr_cnt_1ms_ini;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CFG, ocp_data);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data |= PFM_PWM_SWITCH;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+
+	/* Advnace EEE */
+	if (!rtl_phy_patch_request(tp, true, true)) {
+		data = ocp_reg_read(tp, OCP_POWER_CFG);
+		data |= EEE_CLKDIV_EN;
+		ocp_reg_write(tp, OCP_POWER_CFG, data);
+		tp->ups_info.eee_ckdiv = true;
+
+		data = ocp_reg_read(tp, OCP_DOWN_SPEED);
+		data |= EN_EEE_CMODE | EN_EEE_1000 | EN_10M_CLKDIV;
+		ocp_reg_write(tp, OCP_DOWN_SPEED, data);
+		tp->ups_info.eee_cmod_lv = true;
+		tp->ups_info._10m_ckdiv = true;
+		tp->ups_info.eee_plloff_giga = true;
+
+		ocp_reg_write(tp, OCP_SYSCLK_CFG, 0);
+		ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5));
+		tp->ups_info._250m_ckdiv = true;
+
+		rtl_phy_patch_request(tp, false, true);
+	}
+
+	if (tp->eee_en)
+		rtl_eee_enable(tp, true);
+
+	r8153_aldps_en(tp, true);
+	r8152b_enable_fc(tp);
+
+	set_bit(PHY_RESET, &tp->flags);
+}
+
+static void r8153c_hw_phy_cfg(struct r8152 *tp)
+{
+	r8153b_hw_phy_cfg(tp);
+
+	tp->ups_info.r_tune = true;
+}
+
+static void rtl8153_change_mtu(struct r8152 *tp)
+{
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
+}
+
+static void r8153_first_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	rxdy_gated_en(tp, true);
+	r8153_teredo_off(tp);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	rtl8152_nic_reset(tp);
+	rtl_reset_bmu(tp);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data &= ~MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	wait_oob_link_list_ready(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	wait_oob_link_list_ready(tp);
+
+	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
+
+	rtl8153_change_mtu(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
+	ocp_data |= TCR0_AUTO_FIFO;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+
+	rtl8152_nic_reset(tp);
+
+	/* rx share fifo credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_NORMAL);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
+	/* TX share fifo free credit full threshold */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, TXFIFO_THR_NORMAL2);
+}
+
+static void r8153_enter_oob(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	/* RX FIFO settings for OOB */
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_OOB);
+
+	rtl_disable(tp);
+	rtl_reset_bmu(tp);
+
+	wait_oob_link_list_ready(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	wait_oob_link_list_ready(tp);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, 1522);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_DEFAULT);
+
+	switch (tp->version) {
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+		ocp_data &= ~TEREDO_WAKE_MASK;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+		break;
+
+	case RTL_VER_08:
+	case RTL_VER_09:
+	case RTL_VER_14:
+		/* Clear teredo wake event. bit[15:8] is the teredo wakeup
+		 * type. Set it to zero. bits[7:0] are the W1C bits about
+		 * the events. Set them to all 1 to clear them.
+		 */
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
+		break;
+
+	default:
+		break;
+	}
+
+	rtl_rx_vlan_en(tp, true);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR);
+	ocp_data |= ALDPS_PROXY_MODE;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	rxdy_gated_en(tp, false);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+}
+
+static void rtl8153_disable(struct r8152 *tp)
+{
+	r8153_aldps_en(tp, false);
+	rtl_disable(tp);
+	rtl_reset_bmu(tp);
+	r8153_aldps_en(tp, true);
+}
+
+static u32 fc_pause_on_auto(struct r8152 *tp)
+{
+	return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 6 * 1024);
+}
+
+static u32 fc_pause_off_auto(struct r8152 *tp)
+{
+	return (ALIGN(mtu_to_size(tp->netdev->mtu), 1024) + 14 * 1024);
+}
+
+static void r8156_fc_parameter(struct r8152 *tp)
+{
+	u32 pause_on = tp->fc_pause_on ? tp->fc_pause_on : fc_pause_on_auto(tp);
+	u32 pause_off = tp->fc_pause_off ? tp->fc_pause_off : fc_pause_off_auto(tp);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, pause_on / 16);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, pause_off / 16);
+}
+
+static int rtl8156_enable(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 speed;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return -ENODEV;
+
+	r8156_fc_parameter(tp);
+	set_tx_qlen(tp);
+	rtl_set_eee_plus(tp);
+	r8153_set_rx_early_timeout(tp);
+	r8153_set_rx_early_size(tp);
+
+	speed = rtl8152_get_speed(tp);
+	rtl_set_ifg(tp, speed);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
+	if (speed & _2500bps)
+		ocp_data &= ~IDLE_SPDWN_EN;
+	else
+		ocp_data |= IDLE_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+
+	if (speed & _1000bps)
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x11);
+	else if (speed & _500bps)
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x3d);
+
+	if (tp->udev->speed == USB_SPEED_HIGH) {
+		/* USB 0xb45e[3:0] l1_nyet_hird */
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
+		ocp_data &= ~0xf;
+		if (is_flow_control(speed))
+			ocp_data |= 0xf;
+		else
+			ocp_data |= 0x1;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+	ocp_data &= ~FC_PATCH_TASK;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+	usleep_range(1000, 2000);
+	ocp_data |= FC_PATCH_TASK;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+
+	return rtl_enable(tp);
+}
+
+static void rtl8156_disable(struct r8152 *tp)
+{
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, 0);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, 0);
+
+	rtl8153_disable(tp);
+}
+
+static int rtl8156b_enable(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 speed;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return -ENODEV;
+
+	set_tx_qlen(tp);
+	rtl_set_eee_plus(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM);
+	ocp_data &= ~RX_AGGR_NUM_MASK;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, ocp_data);
+
+	r8153_set_rx_early_timeout(tp);
+	r8153_set_rx_early_size(tp);
+
+	speed = rtl8152_get_speed(tp);
+	rtl_set_ifg(tp, speed);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
+	if (speed & _2500bps)
+		ocp_data &= ~IDLE_SPDWN_EN;
+	else
+		ocp_data |= IDLE_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+
+	if (tp->udev->speed == USB_SPEED_HIGH) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
+		ocp_data &= ~0xf;
+		if (is_flow_control(speed))
+			ocp_data |= 0xf;
+		else
+			ocp_data |= 0x1;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+	ocp_data &= ~FC_PATCH_TASK;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+	usleep_range(1000, 2000);
+	ocp_data |= FC_PATCH_TASK;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+
+	return rtl_enable(tp);
+}
+
+static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u32 speed, u8 duplex,
+			     u32 advertising)
+{
+	u16 bmcr;
+	int ret = 0;
+
+	if (autoneg == AUTONEG_DISABLE) {
+		if (duplex != DUPLEX_HALF && duplex != DUPLEX_FULL)
+			return -EINVAL;
+
+		switch (speed) {
+		case SPEED_10:
+			bmcr = BMCR_SPEED10;
+			if (duplex == DUPLEX_FULL) {
+				bmcr |= BMCR_FULLDPLX;
+				tp->ups_info.speed_duplex = FORCE_10M_FULL;
+			} else {
+				tp->ups_info.speed_duplex = FORCE_10M_HALF;
+			}
+			break;
+		case SPEED_100:
+			bmcr = BMCR_SPEED100;
+			if (duplex == DUPLEX_FULL) {
+				bmcr |= BMCR_FULLDPLX;
+				tp->ups_info.speed_duplex = FORCE_100M_FULL;
+			} else {
+				tp->ups_info.speed_duplex = FORCE_100M_HALF;
+			}
+			break;
+		case SPEED_1000:
+			if (tp->mii.supports_gmii) {
+				bmcr = BMCR_SPEED1000 | BMCR_FULLDPLX;
+				tp->ups_info.speed_duplex = NWAY_1000M_FULL;
+				break;
+			}
+			fallthrough;
+		default:
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (duplex == DUPLEX_FULL)
+			tp->mii.full_duplex = 1;
+		else
+			tp->mii.full_duplex = 0;
+
+		tp->mii.force_media = 1;
+	} else {
+		u16 orig, new1;
+		u32 support;
+
+		support = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
+			  RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
+
+		if (tp->mii.supports_gmii) {
+			support |= RTL_ADVERTISED_1000_FULL;
+
+			if (tp->support_2500full)
+				support |= RTL_ADVERTISED_2500_FULL;
+		}
+
+		if (!(advertising & support))
+			return -EINVAL;
+
+		orig = r8152_mdio_read(tp, MII_ADVERTISE);
+		new1 = orig & ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
+				ADVERTISE_100HALF | ADVERTISE_100FULL);
+		if (advertising & RTL_ADVERTISED_10_HALF) {
+			new1 |= ADVERTISE_10HALF;
+			tp->ups_info.speed_duplex = NWAY_10M_HALF;
+		}
+		if (advertising & RTL_ADVERTISED_10_FULL) {
+			new1 |= ADVERTISE_10FULL;
+			tp->ups_info.speed_duplex = NWAY_10M_FULL;
+		}
+
+		if (advertising & RTL_ADVERTISED_100_HALF) {
+			new1 |= ADVERTISE_100HALF;
+			tp->ups_info.speed_duplex = NWAY_100M_HALF;
+		}
+		if (advertising & RTL_ADVERTISED_100_FULL) {
+			new1 |= ADVERTISE_100FULL;
+			tp->ups_info.speed_duplex = NWAY_100M_FULL;
+		}
+
+		if (orig != new1) {
+			r8152_mdio_write(tp, MII_ADVERTISE, new1);
+			tp->mii.advertising = new1;
+		}
+
+		if (tp->mii.supports_gmii) {
+			orig = r8152_mdio_read(tp, MII_CTRL1000);
+			new1 = orig & ~(ADVERTISE_1000FULL |
+					ADVERTISE_1000HALF);
+
+			if (advertising & RTL_ADVERTISED_1000_FULL) {
+				new1 |= ADVERTISE_1000FULL;
+				tp->ups_info.speed_duplex = NWAY_1000M_FULL;
+			}
+
+			if (orig != new1)
+				r8152_mdio_write(tp, MII_CTRL1000, new1);
+		}
+
+		if (tp->support_2500full) {
+			orig = ocp_reg_read(tp, OCP_10GBT_CTRL);
+			new1 = orig & ~MDIO_AN_10GBT_CTRL_ADV2_5G;
+
+			if (advertising & RTL_ADVERTISED_2500_FULL) {
+				new1 |= MDIO_AN_10GBT_CTRL_ADV2_5G;
+				tp->ups_info.speed_duplex = NWAY_2500M_FULL;
+			}
+
+			if (orig != new1)
+				ocp_reg_write(tp, OCP_10GBT_CTRL, new1);
+		}
+
+		bmcr = BMCR_ANENABLE | BMCR_ANRESTART;
+
+		tp->mii.force_media = 0;
+	}
+
+	if (test_and_clear_bit(PHY_RESET, &tp->flags))
+		bmcr |= BMCR_RESET;
+
+	r8152_mdio_write(tp, MII_BMCR, bmcr);
+
+	if (bmcr & BMCR_RESET) {
+		int i;
+
+		for (i = 0; i < 50; i++) {
+			msleep(20);
+			if ((r8152_mdio_read(tp, MII_BMCR) & BMCR_RESET) == 0)
+				break;
+		}
+	}
+
+out:
+	return ret;
+}
+
+static void rtl8152_up(struct r8152 *tp)
+{
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8152_aldps_en(tp, false);
+	r8152b_exit_oob(tp);
+	r8152_aldps_en(tp, true);
+}
+
+static void rtl8152_down(struct r8152 *tp)
+{
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
+		rtl_drop_queued_tx(tp);
+		return;
+	}
+
+	r8152_power_cut_en(tp, false);
+	r8152_aldps_en(tp, false);
+	r8152b_enter_oob(tp);
+	r8152_aldps_en(tp, true);
+}
+
+static void rtl8153_up(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8153_u1u2en(tp, false);
+	r8153_u2p3en(tp, false);
+	r8153_aldps_en(tp, false);
+	r8153_first_init(tp);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+	ocp_data |= LANWAKE_CLR_EN;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
+	ocp_data &= ~LANWAKE_PIN;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1);
+	ocp_data &= ~DELAY_PHY_PWR_CHG;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1, ocp_data);
+
+	r8153_aldps_en(tp, true);
+
+	switch (tp->version) {
+	case RTL_VER_03:
+	case RTL_VER_04:
+		break;
+	case RTL_VER_05:
+	case RTL_VER_06:
+	default:
+		r8153_u2p3en(tp, true);
+		break;
+	}
+
+	r8153_u1u2en(tp, true);
+}
+
+static void rtl8153_down(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
+		rtl_drop_queued_tx(tp);
+		return;
+	}
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+	ocp_data &= ~LANWAKE_CLR_EN;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+
+	r8153_u1u2en(tp, false);
+	r8153_u2p3en(tp, false);
+	r8153_power_cut_en(tp, false);
+	r8153_aldps_en(tp, false);
+	r8153_enter_oob(tp);
+	r8153_aldps_en(tp, true);
+}
+
+static void rtl8153b_up(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8153b_u1u2en(tp, false);
+	r8153_u2p3en(tp, false);
+	r8153_aldps_en(tp, false);
+
+	r8153_first_init(tp);
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data &= ~PLA_MCU_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
+	r8153_aldps_en(tp, true);
+
+	if (tp->udev->speed >= USB_SPEED_SUPER)
+		r8153b_u1u2en(tp, true);
+}
+
+static void rtl8153b_down(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
+		rtl_drop_queued_tx(tp);
+		return;
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data |= PLA_MCU_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
+	r8153b_u1u2en(tp, false);
+	r8153_u2p3en(tp, false);
+	r8153b_power_cut_en(tp, false);
+	r8153_aldps_en(tp, false);
+	r8153_enter_oob(tp);
+	r8153_aldps_en(tp, true);
+}
+
+static void rtl8153c_change_mtu(struct r8152 *tp)
+{
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, mtu_to_size(tp->netdev->mtu));
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, 10 * 1024 / 64);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
+
+	/* Adjust the tx fifo free credit full threshold, otherwise
+	 * the fifo would be too small to send a jumbo frame packet.
+	 */
+	if (tp->netdev->mtu < 8000)
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 2048 / 8);
+	else
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL, 900 / 8);
+}
+
+static void rtl8153c_up(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8153b_u1u2en(tp, false);
+	r8153_u2p3en(tp, false);
+	r8153_aldps_en(tp, false);
+
+	rxdy_gated_en(tp, true);
+	r8153_teredo_off(tp);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	rtl8152_nic_reset(tp);
+	rtl_reset_bmu(tp);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data &= ~MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	wait_oob_link_list_ready(tp);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= RE_INIT_LL;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	wait_oob_link_list_ready(tp);
+
+	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
+
+	rtl8153c_change_mtu(tp);
+
+	rtl8152_nic_reset(tp);
+
+	/* rx share fifo credit full threshold */
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, 0x02);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 0x08);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_NORMAL);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL2, RXFIFO_THR3_NORMAL);
+
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
+	ocp_data |= BIT(8);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data &= ~PLA_MCU_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
+	r8153_aldps_en(tp, true);
+	r8153b_u1u2en(tp, true);
+}
+
+static void rtl8156_change_mtu(struct r8152 *tp)
+{
+	u32 rx_max_size = mtu_to_size(tp->netdev->mtu);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rx_max_size);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
+	r8156_fc_parameter(tp);
+
+	/* TX share fifo free credit full threshold */
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL,
+		       ALIGN(rx_max_size + sizeof(struct tx_desc), 1024) / 16);
+}
+
+static void rtl8156_up(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8153b_u1u2en(tp, false);
+	r8153_u2p3en(tp, false);
+	r8153_aldps_en(tp, false);
+
+	rxdy_gated_en(tp, true);
+	r8153_teredo_off(tp);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~RCR_ACPT_ALL;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	rtl8152_nic_reset(tp);
+	rtl_reset_bmu(tp);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data &= ~MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
+
+	rtl8156_change_mtu(tp);
+
+	switch (tp->version) {
+	case RTL_TEST_01:
+	case RTL_VER_10:
+	case RTL_VER_11:
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
+		ocp_data |= ACT_ODMA;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
+		break;
+	default:
+		break;
+	}
+
+	/* share FIFO settings */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL);
+	ocp_data &= ~RXFIFO_FULL_MASK;
+	ocp_data |= 0x08;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data &= ~PLA_MCU_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION);
+	ocp_data &= ~(RG_PWRDN_EN | ALL_SPEED_OFF);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, ocp_data);
+
+	ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, 0x00600400);
+
+	if (tp->saved_wolopts != __rtl_get_wol(tp)) {
+		netif_warn(tp, ifup, tp->netdev, "wol setting is changed\n");
+		__rtl_set_wol(tp, tp->saved_wolopts);
+	}
+
+	r8153_aldps_en(tp, true);
+	r8153_u2p3en(tp, true);
+
+	if (tp->udev->speed >= USB_SPEED_SUPER)
+		r8153b_u1u2en(tp, true);
+}
+
+static void rtl8156_down(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
+		rtl_drop_queued_tx(tp);
+		return;
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data |= PLA_MCU_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
+	r8153b_u1u2en(tp, false);
+	r8153_u2p3en(tp, false);
+	r8153b_power_cut_en(tp, false);
+	r8153_aldps_en(tp, false);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data &= ~NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	/* RX FIFO settings for OOB */
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 64 / 16);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_FULL, 1024 / 16);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RX_FIFO_EMPTY, 4096 / 16);
+
+	rtl_disable(tp);
+	rtl_reset_bmu(tp);
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, 1522);
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_DEFAULT);
+
+	/* Clear teredo wake event. bit[15:8] is the teredo wakeup
+	 * type. Set it to zero. bits[7:0] are the W1C bits about
+	 * the events. Set them to all 1 to clear them.
+	 */
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
+	ocp_data |= NOW_IS_OOB;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
+	ocp_data |= MCU_BORW_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+
+	rtl_rx_vlan_en(tp, true);
+	rxdy_gated_en(tp, false);
+
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data |= RCR_APM | RCR_AM | RCR_AB;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	r8153_aldps_en(tp, true);
+}
+
+static bool rtl8152_in_nway(struct r8152 *tp)
+{
+	u16 nway_state;
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_OCP_GPHY_BASE, 0x2000);
+	tp->ocp_base = 0x2000;
+	ocp_write_byte(tp, MCU_TYPE_PLA, 0xb014, 0x4c);		/* phy state */
+	nway_state = ocp_read_word(tp, MCU_TYPE_PLA, 0xb01a);
+
+	/* bit 15: TXDIS_STATE, bit 14: ABD_STATE */
+	if (nway_state & 0xc000)
+		return false;
+	else
+		return true;
+}
+
+static bool rtl8153_in_nway(struct r8152 *tp)
+{
+	u16 phy_state = ocp_reg_read(tp, OCP_PHY_STATE) & 0xff;
+
+	if (phy_state == TXDIS_STATE || phy_state == ABD_STATE)
+		return false;
+	else
+		return true;
+}
+
+static void r8156_mdio_force_mode(struct r8152 *tp)
+{
+	u16 data;
+
+	/* Select force mode through 0xa5b4 bit 15
+	 * 0: MDIO force mode
+	 * 1: MMD force mode
+	 */
+	data = ocp_reg_read(tp, 0xa5b4);
+	if (data & BIT(15)) {
+		data &= ~BIT(15);
+		ocp_reg_write(tp, 0xa5b4, data);
+	}
+}
+
+static void set_carrier(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	struct napi_struct *napi = &tp->napi;
+	u16 speed;
+
+	speed = rtl8152_get_speed(tp);
+
+	if (speed & LINK_STATUS) {
+		if (!netif_carrier_ok(netdev)) {
+			tp->rtl_ops.enable(tp);
+			netif_stop_queue(netdev);
+			napi_disable(napi);
+			netif_carrier_on(netdev);
+			rtl_start_rx(tp);
+			clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
+			_rtl8152_set_rx_mode(netdev);
+			napi_enable(napi);
+			netif_wake_queue(netdev);
+			netif_info(tp, link, netdev, "carrier on\n");
+		} else if (netif_queue_stopped(netdev) &&
+			   skb_queue_len(&tp->tx_queue) < tp->tx_qlen) {
+			netif_wake_queue(netdev);
+		}
+	} else {
+		if (netif_carrier_ok(netdev)) {
+			netif_carrier_off(netdev);
+			tasklet_disable(&tp->tx_tl);
+			napi_disable(napi);
+			tp->rtl_ops.disable(tp);
+			napi_enable(napi);
+			tasklet_enable(&tp->tx_tl);
+			netif_info(tp, link, netdev, "carrier off\n");
+		}
+	}
+}
+
+static void rtl_work_func_t(struct work_struct *work)
+{
+	struct r8152 *tp = container_of(work, struct r8152, schedule.work);
+
+	/* If the device is unplugged or !netif_running(), the workqueue
+	 * doesn't need to wake the device, and could return directly.
+	 */
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags) || !netif_running(tp->netdev))
+		return;
+
+	if (usb_autopm_get_interface(tp->intf) < 0)
+		return;
+
+	if (!test_bit(WORK_ENABLE, &tp->flags))
+		goto out1;
+
+	if (!mutex_trylock(&tp->control)) {
+		schedule_delayed_work(&tp->schedule, 0);
+		goto out1;
+	}
+
+	if (test_and_clear_bit(RTL8152_LINK_CHG, &tp->flags))
+		set_carrier(tp);
+
+	if (test_and_clear_bit(RTL8152_SET_RX_MODE, &tp->flags))
+		_rtl8152_set_rx_mode(tp->netdev);
+
+	/* don't schedule tasket before linking */
+	if (test_and_clear_bit(SCHEDULE_TASKLET, &tp->flags) &&
+	    netif_carrier_ok(tp->netdev))
+		tasklet_schedule(&tp->tx_tl);
+
+	if (test_and_clear_bit(RX_EPROTO, &tp->flags) &&
+	    !list_empty(&tp->rx_done))
+		napi_schedule(&tp->napi);
+
+	mutex_unlock(&tp->control);
+
+out1:
+	usb_autopm_put_interface(tp->intf);
+}
+
+static void rtl_hw_phy_work_func_t(struct work_struct *work)
+{
+	struct r8152 *tp = container_of(work, struct r8152, hw_phy_work.work);
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	if (usb_autopm_get_interface(tp->intf) < 0)
+		return;
+
+	mutex_lock(&tp->control);
+
+	if (rtl8152_request_firmware(tp) == -ENODEV && tp->rtl_fw.retry) {
+		tp->rtl_fw.retry = false;
+		tp->rtl_fw.fw = NULL;
+
+		/* Delay execution in case request_firmware() is not ready yet.
+		 */
+		queue_delayed_work(system_long_wq, &tp->hw_phy_work, HZ * 10);
+		goto ignore_once;
+	}
+
+	tp->rtl_ops.hw_phy_cfg(tp);
+
+	rtl8152_set_speed(tp, tp->autoneg, tp->speed, tp->duplex,
+			  tp->advertising);
+
+ignore_once:
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int rtl_notifier(struct notifier_block *nb, unsigned long action,
+			void *data)
+{
+	struct r8152 *tp = container_of(nb, struct r8152, pm_notifier);
+
+	switch (action) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		usb_autopm_get_interface(tp->intf);
+		break;
+
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		usb_autopm_put_interface(tp->intf);
+		break;
+
+	case PM_POST_RESTORE:
+	case PM_RESTORE_PREPARE:
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+#endif
+
+static int rtl8152_open(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int res = 0;
+
+	if (work_busy(&tp->hw_phy_work.work) & WORK_BUSY_PENDING) {
+		cancel_delayed_work_sync(&tp->hw_phy_work);
+		rtl_hw_phy_work_func_t(&tp->hw_phy_work.work);
+	}
+
+	res = alloc_all_mem(tp);
+	if (res)
+		goto out;
+
+	res = usb_autopm_get_interface(tp->intf);
+	if (res < 0)
+		goto out_free;
+
+	mutex_lock(&tp->control);
+
+	tp->rtl_ops.up(tp);
+
+	netif_carrier_off(netdev);
+	netif_start_queue(netdev);
+	set_bit(WORK_ENABLE, &tp->flags);
+
+	res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+	if (res) {
+		if (res == -ENODEV)
+			netif_device_detach(tp->netdev);
+		netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
+			   res);
+		goto out_unlock;
+	}
+	napi_enable(&tp->napi);
+	tasklet_enable(&tp->tx_tl);
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+#ifdef CONFIG_PM_SLEEP
+	tp->pm_notifier.notifier_call = rtl_notifier;
+	register_pm_notifier(&tp->pm_notifier);
+#endif
+	return 0;
+
+out_unlock:
+	mutex_unlock(&tp->control);
+	usb_autopm_put_interface(tp->intf);
+out_free:
+	free_all_mem(tp);
+out:
+	return res;
+}
+
+static int rtl8152_close(struct net_device *netdev)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int res = 0;
+
+#ifdef CONFIG_PM_SLEEP
+	unregister_pm_notifier(&tp->pm_notifier);
+#endif
+	tasklet_disable(&tp->tx_tl);
+	clear_bit(WORK_ENABLE, &tp->flags);
+	usb_kill_urb(tp->intr_urb);
+	cancel_delayed_work_sync(&tp->schedule);
+	napi_disable(&tp->napi);
+	netif_stop_queue(netdev);
+
+	res = usb_autopm_get_interface(tp->intf);
+	if (res < 0 || test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
+		rtl_drop_queued_tx(tp);
+		rtl_stop_rx(tp);
+	} else {
+		mutex_lock(&tp->control);
+
+		tp->rtl_ops.down(tp);
+
+		mutex_unlock(&tp->control);
+	}
+
+	if (!res)
+		usb_autopm_put_interface(tp->intf);
+
+	free_all_mem(tp);
+
+	return res;
+}
+
+static void rtl_tally_reset(struct r8152 *tp)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY);
+	ocp_data |= TALLY_RESET;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
+}
+
+static void r8152b_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	data = r8152_mdio_read(tp, MII_BMCR);
+	if (data & BMCR_PDOWN) {
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+	}
+
+	r8152_aldps_en(tp, false);
+
+	if (tp->version == RTL_VER_01) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
+		ocp_data &= ~LED_MODE_MASK;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+	}
+
+	r8152_power_cut_en(tp, false);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+	ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL);
+	ocp_data &= ~MCU_CLK_RATIO_MASK;
+	ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN;
+	ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data);
+	ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK |
+		   SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
+
+	rtl_tally_reset(tp);
+
+	/* enable rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+}
+
+static void r8153_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+	int i;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8153_u1u2en(tp, false);
+
+	for (i = 0; i < 500; i++) {
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+		    AUTOLOAD_DONE)
+			break;
+
+		msleep(20);
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			break;
+	}
+
+	data = r8153_phy_status(tp, 0);
+
+	if (tp->version == RTL_VER_03 || tp->version == RTL_VER_04 ||
+	    tp->version == RTL_VER_05)
+		ocp_reg_write(tp, OCP_ADC_CFG, CKADSEL_L | ADC_EN | EN_EMI_L);
+
+	data = r8152_mdio_read(tp, MII_BMCR);
+	if (data & BMCR_PDOWN) {
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+	}
+
+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+
+	r8153_u2p3en(tp, false);
+
+	if (tp->version == RTL_VER_04) {
+		ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2);
+		ocp_data &= ~pwd_dn_scale_mask;
+		ocp_data |= pwd_dn_scale(96);
+		ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2, ocp_data);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
+		ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+	} else if (tp->version == RTL_VER_05) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0);
+		ocp_data &= ~ECM_ALDPS;
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0, ocp_data);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
+		if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
+			ocp_data &= ~DYNAMIC_BURST;
+		else
+			ocp_data |= DYNAMIC_BURST;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
+	} else if (tp->version == RTL_VER_06) {
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
+		if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
+			ocp_data &= ~DYNAMIC_BURST;
+		else
+			ocp_data |= DYNAMIC_BURST;
+		ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
+
+		r8153_queue_wake(tp, false);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+		if (rtl8152_get_speed(tp) & LINK_STATUS)
+			ocp_data |= CUR_LINK_OK;
+		else
+			ocp_data &= ~CUR_LINK_OK;
+		ocp_data |= POLL_LINK_CHG;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+	}
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2);
+	ocp_data |= EP4_FULL_FC;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
+	ocp_data &= ~TIMER11_EN;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
+	ocp_data &= ~LED_MODE_MASK;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+
+	ocp_data = FIFO_EMPTY_1FB | ROK_EXIT_LPM;
+	if (tp->version == RTL_VER_04 && tp->udev->speed < USB_SPEED_SUPER)
+		ocp_data |= LPM_TIMER_500MS;
+	else
+		ocp_data |= LPM_TIMER_500US;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2);
+	ocp_data &= ~SEN_VAL_MASK;
+	ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
+
+	ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
+
+	r8153_power_cut_en(tp, false);
+	rtl_runtime_suspend_enable(tp, false);
+	r8153_mac_clk_speed_down(tp, false);
+	r8153_u1u2en(tp, true);
+	usb_enable_lpm(tp->udev);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
+	ocp_data |= LANWAKE_CLR_EN;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
+	ocp_data &= ~LANWAKE_PIN;
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+
+	/* rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
+	if (tp->dell_tb_rx_agg_bug)
+		ocp_data |= RX_AGG_DISABLE;
+
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+
+	rtl_tally_reset(tp);
+
+	switch (tp->udev->speed) {
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		tp->coalesce = COALESCE_SUPER;
+		break;
+	case USB_SPEED_HIGH:
+		tp->coalesce = COALESCE_HIGH;
+		break;
+	default:
+		tp->coalesce = COALESCE_SLOW;
+		break;
+	}
+}
+
+static void r8153b_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+	int i;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8153b_u1u2en(tp, false);
+
+	for (i = 0; i < 500; i++) {
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+		    AUTOLOAD_DONE)
+			break;
+
+		msleep(20);
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			break;
+	}
+
+	data = r8153_phy_status(tp, 0);
+
+	data = r8152_mdio_read(tp, MII_BMCR);
+	if (data & BMCR_PDOWN) {
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+	}
+
+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+
+	r8153_u2p3en(tp, false);
+
+	/* MSC timer = 0xfff * 8ms = 32760 ms */
+	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
+
+	r8153b_power_cut_en(tp, false);
+	r8153b_ups_en(tp, false);
+	r8153_queue_wake(tp, false);
+	rtl_runtime_suspend_enable(tp, false);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+	if (rtl8152_get_speed(tp) & LINK_STATUS)
+		ocp_data |= CUR_LINK_OK;
+	else
+		ocp_data &= ~CUR_LINK_OK;
+	ocp_data |= POLL_LINK_CHG;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+
+	if (tp->udev->speed >= USB_SPEED_SUPER)
+		r8153b_u1u2en(tp, true);
+
+	usb_enable_lpm(tp->udev);
+
+	/* MAC clock speed down */
+	r8153_mac_clk_speed_down(tp, true);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data &= ~PLA_MCU_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
+	if (tp->version == RTL_VER_09) {
+		/* Disable Test IO for 32QFN */
+		if (ocp_read_byte(tp, MCU_TYPE_PLA, 0xdc00) & BIT(5)) {
+			ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+			ocp_data |= TEST_IO_OFF;
+			ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+		}
+	}
+
+	set_bit(GREEN_ETHERNET, &tp->flags);
+
+	/* rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+
+	rtl_tally_reset(tp);
+
+	tp->coalesce = 15000;	/* 15 us */
+}
+
+static void r8153c_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+	int i;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8153b_u1u2en(tp, false);
+
+	/* Disable spi_en */
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
+	ocp_data &= ~BIT(3);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, 0xcbf0);
+	ocp_data |= BIT(1);
+	ocp_write_word(tp, MCU_TYPE_USB, 0xcbf0, ocp_data);
+
+	for (i = 0; i < 500; i++) {
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+		    AUTOLOAD_DONE)
+			break;
+
+		msleep(20);
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			return;
+	}
+
+	data = r8153_phy_status(tp, 0);
+
+	data = r8152_mdio_read(tp, MII_BMCR);
+	if (data & BMCR_PDOWN) {
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+	}
+
+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+
+	r8153_u2p3en(tp, false);
+
+	/* MSC timer = 0xfff * 8ms = 32760 ms */
+	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
+
+	r8153b_power_cut_en(tp, false);
+	r8153c_ups_en(tp, false);
+	r8153_queue_wake(tp, false);
+	rtl_runtime_suspend_enable(tp, false);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+	if (rtl8152_get_speed(tp) & LINK_STATUS)
+		ocp_data |= CUR_LINK_OK;
+	else
+		ocp_data &= ~CUR_LINK_OK;
+
+	ocp_data |= POLL_LINK_CHG;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+
+	r8153b_u1u2en(tp, true);
+
+	usb_enable_lpm(tp->udev);
+
+	/* MAC clock speed down */
+	r8153_mac_clk_speed_down(tp, true);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
+	ocp_data &= ~BIT(7);
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+
+	set_bit(GREEN_ETHERNET, &tp->flags);
+
+	/* rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+
+	rtl_tally_reset(tp);
+
+	tp->coalesce = 15000;	/* 15 us */
+}
+
+static void r8156_hw_phy_cfg(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+	if (ocp_data & PCUT_STATUS) {
+		ocp_data &= ~PCUT_STATUS;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+	}
+
+	data = r8153_phy_status(tp, 0);
+	switch (data) {
+	case PHY_STAT_EXT_INIT:
+		rtl8152_apply_firmware(tp, true);
+
+		data = ocp_reg_read(tp, 0xa468);
+		data &= ~(BIT(3) | BIT(1));
+		ocp_reg_write(tp, 0xa468, data);
+		break;
+	case PHY_STAT_LAN_ON:
+	case PHY_STAT_PWRDN:
+	default:
+		rtl8152_apply_firmware(tp, false);
+		break;
+	}
+
+	/* disable ALDPS before updating the PHY parameters */
+	r8153_aldps_en(tp, false);
+
+	/* disable EEE before updating the PHY parameters */
+	rtl_eee_enable(tp, false);
+
+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+	WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data |= PFM_PWM_SWITCH;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+
+	switch (tp->version) {
+	case RTL_VER_10:
+		data = ocp_reg_read(tp, 0xad40);
+		data &= ~0x3ff;
+		data |= BIT(7) | BIT(2);
+		ocp_reg_write(tp, 0xad40, data);
+
+		data = ocp_reg_read(tp, 0xad4e);
+		data |= BIT(4);
+		ocp_reg_write(tp, 0xad4e, data);
+		data = ocp_reg_read(tp, 0xad16);
+		data &= ~0x3ff;
+		data |= 0x6;
+		ocp_reg_write(tp, 0xad16, data);
+		data = ocp_reg_read(tp, 0xad32);
+		data &= ~0x3f;
+		data |= 6;
+		ocp_reg_write(tp, 0xad32, data);
+		data = ocp_reg_read(tp, 0xac08);
+		data &= ~(BIT(12) | BIT(8));
+		ocp_reg_write(tp, 0xac08, data);
+		data = ocp_reg_read(tp, 0xac8a);
+		data |= BIT(12) | BIT(13) | BIT(14);
+		data &= ~BIT(15);
+		ocp_reg_write(tp, 0xac8a, data);
+		data = ocp_reg_read(tp, 0xad18);
+		data |= BIT(10);
+		ocp_reg_write(tp, 0xad18, data);
+		data = ocp_reg_read(tp, 0xad1a);
+		data |= 0x3ff;
+		ocp_reg_write(tp, 0xad1a, data);
+		data = ocp_reg_read(tp, 0xad1c);
+		data |= 0x3ff;
+		ocp_reg_write(tp, 0xad1c, data);
+
+		data = sram_read(tp, 0x80ea);
+		data &= ~0xff00;
+		data |= 0xc400;
+		sram_write(tp, 0x80ea, data);
+		data = sram_read(tp, 0x80eb);
+		data &= ~0x0700;
+		data |= 0x0300;
+		sram_write(tp, 0x80eb, data);
+		data = sram_read(tp, 0x80f8);
+		data &= ~0xff00;
+		data |= 0x1c00;
+		sram_write(tp, 0x80f8, data);
+		data = sram_read(tp, 0x80f1);
+		data &= ~0xff00;
+		data |= 0x3000;
+		sram_write(tp, 0x80f1, data);
+
+		data = sram_read(tp, 0x80fe);
+		data &= ~0xff00;
+		data |= 0xa500;
+		sram_write(tp, 0x80fe, data);
+		data = sram_read(tp, 0x8102);
+		data &= ~0xff00;
+		data |= 0x5000;
+		sram_write(tp, 0x8102, data);
+		data = sram_read(tp, 0x8015);
+		data &= ~0xff00;
+		data |= 0x3300;
+		sram_write(tp, 0x8015, data);
+		data = sram_read(tp, 0x8100);
+		data &= ~0xff00;
+		data |= 0x7000;
+		sram_write(tp, 0x8100, data);
+		data = sram_read(tp, 0x8014);
+		data &= ~0xff00;
+		data |= 0xf000;
+		sram_write(tp, 0x8014, data);
+		data = sram_read(tp, 0x8016);
+		data &= ~0xff00;
+		data |= 0x6500;
+		sram_write(tp, 0x8016, data);
+		data = sram_read(tp, 0x80dc);
+		data &= ~0xff00;
+		data |= 0xed00;
+		sram_write(tp, 0x80dc, data);
+		data = sram_read(tp, 0x80df);
+		data |= BIT(8);
+		sram_write(tp, 0x80df, data);
+		data = sram_read(tp, 0x80e1);
+		data &= ~BIT(8);
+		sram_write(tp, 0x80e1, data);
+
+		data = ocp_reg_read(tp, 0xbf06);
+		data &= ~0x003f;
+		data |= 0x0038;
+		ocp_reg_write(tp, 0xbf06, data);
+
+		sram_write(tp, 0x819f, 0xddb6);
+
+		ocp_reg_write(tp, 0xbc34, 0x5555);
+		data = ocp_reg_read(tp, 0xbf0a);
+		data &= ~0x0e00;
+		data |= 0x0a00;
+		ocp_reg_write(tp, 0xbf0a, data);
+
+		data = ocp_reg_read(tp, 0xbd2c);
+		data &= ~BIT(13);
+		ocp_reg_write(tp, 0xbd2c, data);
+		break;
+	case RTL_VER_11:
+		data = ocp_reg_read(tp, 0xad16);
+		data |= 0x3ff;
+		ocp_reg_write(tp, 0xad16, data);
+		data = ocp_reg_read(tp, 0xad32);
+		data &= ~0x3f;
+		data |= 6;
+		ocp_reg_write(tp, 0xad32, data);
+		data = ocp_reg_read(tp, 0xac08);
+		data &= ~(BIT(12) | BIT(8));
+		ocp_reg_write(tp, 0xac08, data);
+		data = ocp_reg_read(tp, 0xacc0);
+		data &= ~0x3;
+		data |= BIT(1);
+		ocp_reg_write(tp, 0xacc0, data);
+		data = ocp_reg_read(tp, 0xad40);
+		data &= ~0xe7;
+		data |= BIT(6) | BIT(2);
+		ocp_reg_write(tp, 0xad40, data);
+		data = ocp_reg_read(tp, 0xac14);
+		data &= ~BIT(7);
+		ocp_reg_write(tp, 0xac14, data);
+		data = ocp_reg_read(tp, 0xac80);
+		data &= ~(BIT(8) | BIT(9));
+		ocp_reg_write(tp, 0xac80, data);
+		data = ocp_reg_read(tp, 0xac5e);
+		data &= ~0x7;
+		data |= BIT(1);
+		ocp_reg_write(tp, 0xac5e, data);
+		ocp_reg_write(tp, 0xad4c, 0x00a8);
+		ocp_reg_write(tp, 0xac5c, 0x01ff);
+		data = ocp_reg_read(tp, 0xac8a);
+		data &= ~0xf0;
+		data |= BIT(4) | BIT(5);
+		ocp_reg_write(tp, 0xac8a, data);
+		ocp_reg_write(tp, 0xb87c, 0x8157);
+		data = ocp_reg_read(tp, 0xb87e);
+		data &= ~0xff00;
+		data |= 0x0500;
+		ocp_reg_write(tp, 0xb87e, data);
+		ocp_reg_write(tp, 0xb87c, 0x8159);
+		data = ocp_reg_read(tp, 0xb87e);
+		data &= ~0xff00;
+		data |= 0x0700;
+		ocp_reg_write(tp, 0xb87e, data);
+
+		/* AAGC */
+		ocp_reg_write(tp, 0xb87c, 0x80a2);
+		ocp_reg_write(tp, 0xb87e, 0x0153);
+		ocp_reg_write(tp, 0xb87c, 0x809c);
+		ocp_reg_write(tp, 0xb87e, 0x0153);
+
+		/* EEE parameter */
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS_2P5G, 0x0056);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_USB_CFG);
+		ocp_data |= EN_XG_LIP | EN_G_LIP;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
+
+		sram_write(tp, 0x8257, 0x020f); /*  XG PLL */
+		sram_write(tp, 0x80ea, 0x7843); /* GIGA Master */
+
+		if (rtl_phy_patch_request(tp, true, true))
+			return;
+
+		/* Advance EEE */
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
+		ocp_data |= EEE_SPDWN_EN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+
+		data = ocp_reg_read(tp, OCP_DOWN_SPEED);
+		data &= ~(EN_EEE_100 | EN_EEE_1000);
+		data |= EN_10M_CLKDIV;
+		ocp_reg_write(tp, OCP_DOWN_SPEED, data);
+		tp->ups_info._10m_ckdiv = true;
+		tp->ups_info.eee_plloff_100 = false;
+		tp->ups_info.eee_plloff_giga = false;
+
+		data = ocp_reg_read(tp, OCP_POWER_CFG);
+		data &= ~EEE_CLKDIV_EN;
+		ocp_reg_write(tp, OCP_POWER_CFG, data);
+		tp->ups_info.eee_ckdiv = false;
+
+		ocp_reg_write(tp, OCP_SYSCLK_CFG, 0);
+		ocp_reg_write(tp, OCP_SYSCLK_CFG, sysclk_div_expo(5));
+		tp->ups_info._250m_ckdiv = false;
+
+		rtl_phy_patch_request(tp, false, true);
+
+		/* enable ADC Ibias Cal */
+		data = ocp_reg_read(tp, 0xd068);
+		data |= BIT(13);
+		ocp_reg_write(tp, 0xd068, data);
+
+		/* enable Thermal Sensor */
+		data = sram_read(tp, 0x81a2);
+		data &= ~BIT(8);
+		sram_write(tp, 0x81a2, data);
+		data = ocp_reg_read(tp, 0xb54c);
+		data &= ~0xff00;
+		data |= 0xdb00;
+		ocp_reg_write(tp, 0xb54c, data);
+
+		/* Nway 2.5G Lite */
+		data = ocp_reg_read(tp, 0xa454);
+		data &= ~BIT(0);
+		ocp_reg_write(tp, 0xa454, data);
+
+		/* CS DSP solution */
+		data = ocp_reg_read(tp, OCP_10GBT_CTRL);
+		data |= RTL_ADV2_5G_F_R;
+		ocp_reg_write(tp, OCP_10GBT_CTRL, data);
+		data = ocp_reg_read(tp, 0xad4e);
+		data &= ~BIT(4);
+		ocp_reg_write(tp, 0xad4e, data);
+		data = ocp_reg_read(tp, 0xa86a);
+		data &= ~BIT(0);
+		ocp_reg_write(tp, 0xa86a, data);
+
+		/* MDI SWAP */
+		if ((ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG) & MID_REVERSE) &&
+		    (ocp_reg_read(tp, 0xd068) & BIT(1))) {
+			u16 swap_a, swap_b;
+
+			data = ocp_reg_read(tp, 0xd068);
+			data &= ~0x1f;
+			data |= 0x1; /* p0 */
+			ocp_reg_write(tp, 0xd068, data);
+			swap_a = ocp_reg_read(tp, 0xd06a);
+			data &= ~0x18;
+			data |= 0x18; /* p3 */
+			ocp_reg_write(tp, 0xd068, data);
+			swap_b = ocp_reg_read(tp, 0xd06a);
+			data &= ~0x18; /* p0 */
+			ocp_reg_write(tp, 0xd068, data);
+			ocp_reg_write(tp, 0xd06a,
+				      (swap_a & ~0x7ff) | (swap_b & 0x7ff));
+			data |= 0x18; /* p3 */
+			ocp_reg_write(tp, 0xd068, data);
+			ocp_reg_write(tp, 0xd06a,
+				      (swap_b & ~0x7ff) | (swap_a & 0x7ff));
+			data &= ~0x18;
+			data |= 0x08; /* p1 */
+			ocp_reg_write(tp, 0xd068, data);
+			swap_a = ocp_reg_read(tp, 0xd06a);
+			data &= ~0x18;
+			data |= 0x10; /* p2 */
+			ocp_reg_write(tp, 0xd068, data);
+			swap_b = ocp_reg_read(tp, 0xd06a);
+			data &= ~0x18;
+			data |= 0x08; /* p1 */
+			ocp_reg_write(tp, 0xd068, data);
+			ocp_reg_write(tp, 0xd06a,
+				      (swap_a & ~0x7ff) | (swap_b & 0x7ff));
+			data &= ~0x18;
+			data |= 0x10; /* p2 */
+			ocp_reg_write(tp, 0xd068, data);
+			ocp_reg_write(tp, 0xd06a,
+				      (swap_b & ~0x7ff) | (swap_a & 0x7ff));
+			swap_a = ocp_reg_read(tp, 0xbd5a);
+			swap_b = ocp_reg_read(tp, 0xbd5c);
+			ocp_reg_write(tp, 0xbd5a, (swap_a & ~0x1f1f) |
+				      ((swap_b & 0x1f) << 8) |
+				      ((swap_b >> 8) & 0x1f));
+			ocp_reg_write(tp, 0xbd5c, (swap_b & ~0x1f1f) |
+				      ((swap_a & 0x1f) << 8) |
+				      ((swap_a >> 8) & 0x1f));
+			swap_a = ocp_reg_read(tp, 0xbc18);
+			swap_b = ocp_reg_read(tp, 0xbc1a);
+			ocp_reg_write(tp, 0xbc18, (swap_a & ~0x1f1f) |
+				      ((swap_b & 0x1f) << 8) |
+				      ((swap_b >> 8) & 0x1f));
+			ocp_reg_write(tp, 0xbc1a, (swap_b & ~0x1f1f) |
+				      ((swap_a & 0x1f) << 8) |
+				      ((swap_a >> 8) & 0x1f));
+		}
+
+		/* Notify the MAC when the speed is changed to force mode. */
+		data = ocp_reg_read(tp, OCP_INTR_EN);
+		data |= INTR_SPEED_FORCE;
+		ocp_reg_write(tp, OCP_INTR_EN, data);
+		break;
+	default:
+		break;
+	}
+
+	rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
+
+	data = ocp_reg_read(tp, 0xa428);
+	data &= ~BIT(9);
+	ocp_reg_write(tp, 0xa428, data);
+	data = ocp_reg_read(tp, 0xa5ea);
+	data &= ~BIT(0);
+	ocp_reg_write(tp, 0xa5ea, data);
+	tp->ups_info.lite_mode = 0;
+
+	if (tp->eee_en)
+		rtl_eee_enable(tp, true);
+
+	r8153_aldps_en(tp, true);
+	r8152b_enable_fc(tp);
+	r8153_u2p3en(tp, true);
+
+	set_bit(PHY_RESET, &tp->flags);
+}
+
+static void r8156b_hw_phy_cfg(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+
+	switch (tp->version) {
+	case RTL_VER_12:
+		ocp_reg_write(tp, 0xbf86, 0x9000);
+		data = ocp_reg_read(tp, 0xc402);
+		data |= BIT(10);
+		ocp_reg_write(tp, 0xc402, data);
+		data &= ~BIT(10);
+		ocp_reg_write(tp, 0xc402, data);
+		ocp_reg_write(tp, 0xbd86, 0x1010);
+		ocp_reg_write(tp, 0xbd88, 0x1010);
+		data = ocp_reg_read(tp, 0xbd4e);
+		data &= ~(BIT(10) | BIT(11));
+		data |= BIT(11);
+		ocp_reg_write(tp, 0xbd4e, data);
+		data = ocp_reg_read(tp, 0xbf46);
+		data &= ~0xf00;
+		data |= 0x700;
+		ocp_reg_write(tp, 0xbf46, data);
+		break;
+	case RTL_VER_13:
+	case RTL_VER_15:
+		r8156b_wait_loading_flash(tp);
+		break;
+	default:
+		break;
+	}
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+	if (ocp_data & PCUT_STATUS) {
+		ocp_data &= ~PCUT_STATUS;
+		ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+	}
+
+	data = r8153_phy_status(tp, 0);
+	switch (data) {
+	case PHY_STAT_EXT_INIT:
+		rtl8152_apply_firmware(tp, true);
+
+		data = ocp_reg_read(tp, 0xa466);
+		data &= ~BIT(0);
+		ocp_reg_write(tp, 0xa466, data);
+
+		data = ocp_reg_read(tp, 0xa468);
+		data &= ~(BIT(3) | BIT(1));
+		ocp_reg_write(tp, 0xa468, data);
+		break;
+	case PHY_STAT_LAN_ON:
+	case PHY_STAT_PWRDN:
+	default:
+		rtl8152_apply_firmware(tp, false);
+		break;
+	}
+
+	data = r8152_mdio_read(tp, MII_BMCR);
+	if (data & BMCR_PDOWN) {
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+	}
+
+	/* disable ALDPS before updating the PHY parameters */
+	r8153_aldps_en(tp, false);
+
+	/* disable EEE before updating the PHY parameters */
+	rtl_eee_enable(tp, false);
+
+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+	WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+	ocp_data |= PFM_PWM_SWITCH;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+
+	switch (tp->version) {
+	case RTL_VER_12:
+		data = ocp_reg_read(tp, 0xbc08);
+		data |= BIT(3) | BIT(2);
+		ocp_reg_write(tp, 0xbc08, data);
+
+		data = sram_read(tp, 0x8fff);
+		data &= ~0xff00;
+		data |= 0x0400;
+		sram_write(tp, 0x8fff, data);
+
+		data = ocp_reg_read(tp, 0xacda);
+		data |= 0xff00;
+		ocp_reg_write(tp, 0xacda, data);
+		data = ocp_reg_read(tp, 0xacde);
+		data |= 0xf000;
+		ocp_reg_write(tp, 0xacde, data);
+		ocp_reg_write(tp, 0xac8c, 0x0ffc);
+		ocp_reg_write(tp, 0xac46, 0xb7b4);
+		ocp_reg_write(tp, 0xac50, 0x0fbc);
+		ocp_reg_write(tp, 0xac3c, 0x9240);
+		ocp_reg_write(tp, 0xac4e, 0x0db4);
+		ocp_reg_write(tp, 0xacc6, 0x0707);
+		ocp_reg_write(tp, 0xacc8, 0xa0d3);
+		ocp_reg_write(tp, 0xad08, 0x0007);
+
+		ocp_reg_write(tp, 0xb87c, 0x8560);
+		ocp_reg_write(tp, 0xb87e, 0x19cc);
+		ocp_reg_write(tp, 0xb87c, 0x8562);
+		ocp_reg_write(tp, 0xb87e, 0x19cc);
+		ocp_reg_write(tp, 0xb87c, 0x8564);
+		ocp_reg_write(tp, 0xb87e, 0x19cc);
+		ocp_reg_write(tp, 0xb87c, 0x8566);
+		ocp_reg_write(tp, 0xb87e, 0x147d);
+		ocp_reg_write(tp, 0xb87c, 0x8568);
+		ocp_reg_write(tp, 0xb87e, 0x147d);
+		ocp_reg_write(tp, 0xb87c, 0x856a);
+		ocp_reg_write(tp, 0xb87e, 0x147d);
+		ocp_reg_write(tp, 0xb87c, 0x8ffe);
+		ocp_reg_write(tp, 0xb87e, 0x0907);
+		ocp_reg_write(tp, 0xb87c, 0x80d6);
+		ocp_reg_write(tp, 0xb87e, 0x2801);
+		ocp_reg_write(tp, 0xb87c, 0x80f2);
+		ocp_reg_write(tp, 0xb87e, 0x2801);
+		ocp_reg_write(tp, 0xb87c, 0x80f4);
+		ocp_reg_write(tp, 0xb87e, 0x6077);
+		ocp_reg_write(tp, 0xb506, 0x01e7);
+
+		ocp_reg_write(tp, 0xb87c, 0x8013);
+		ocp_reg_write(tp, 0xb87e, 0x0700);
+		ocp_reg_write(tp, 0xb87c, 0x8fb9);
+		ocp_reg_write(tp, 0xb87e, 0x2801);
+		ocp_reg_write(tp, 0xb87c, 0x8fba);
+		ocp_reg_write(tp, 0xb87e, 0x0100);
+		ocp_reg_write(tp, 0xb87c, 0x8fbc);
+		ocp_reg_write(tp, 0xb87e, 0x1900);
+		ocp_reg_write(tp, 0xb87c, 0x8fbe);
+		ocp_reg_write(tp, 0xb87e, 0xe100);
+		ocp_reg_write(tp, 0xb87c, 0x8fc0);
+		ocp_reg_write(tp, 0xb87e, 0x0800);
+		ocp_reg_write(tp, 0xb87c, 0x8fc2);
+		ocp_reg_write(tp, 0xb87e, 0xe500);
+		ocp_reg_write(tp, 0xb87c, 0x8fc4);
+		ocp_reg_write(tp, 0xb87e, 0x0f00);
+		ocp_reg_write(tp, 0xb87c, 0x8fc6);
+		ocp_reg_write(tp, 0xb87e, 0xf100);
+		ocp_reg_write(tp, 0xb87c, 0x8fc8);
+		ocp_reg_write(tp, 0xb87e, 0x0400);
+		ocp_reg_write(tp, 0xb87c, 0x8fca);
+		ocp_reg_write(tp, 0xb87e, 0xf300);
+		ocp_reg_write(tp, 0xb87c, 0x8fcc);
+		ocp_reg_write(tp, 0xb87e, 0xfd00);
+		ocp_reg_write(tp, 0xb87c, 0x8fce);
+		ocp_reg_write(tp, 0xb87e, 0xff00);
+		ocp_reg_write(tp, 0xb87c, 0x8fd0);
+		ocp_reg_write(tp, 0xb87e, 0xfb00);
+		ocp_reg_write(tp, 0xb87c, 0x8fd2);
+		ocp_reg_write(tp, 0xb87e, 0x0100);
+		ocp_reg_write(tp, 0xb87c, 0x8fd4);
+		ocp_reg_write(tp, 0xb87e, 0xf400);
+		ocp_reg_write(tp, 0xb87c, 0x8fd6);
+		ocp_reg_write(tp, 0xb87e, 0xff00);
+		ocp_reg_write(tp, 0xb87c, 0x8fd8);
+		ocp_reg_write(tp, 0xb87e, 0xf600);
+
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG);
+		ocp_data |= EN_XG_LIP | EN_G_LIP;
+		ocp_write_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
+		ocp_reg_write(tp, 0xb87c, 0x813d);
+		ocp_reg_write(tp, 0xb87e, 0x390e);
+		ocp_reg_write(tp, 0xb87c, 0x814f);
+		ocp_reg_write(tp, 0xb87e, 0x790e);
+		ocp_reg_write(tp, 0xb87c, 0x80b0);
+		ocp_reg_write(tp, 0xb87e, 0x0f31);
+		data = ocp_reg_read(tp, 0xbf4c);
+		data |= BIT(1);
+		ocp_reg_write(tp, 0xbf4c, data);
+		data = ocp_reg_read(tp, 0xbcca);
+		data |= BIT(9) | BIT(8);
+		ocp_reg_write(tp, 0xbcca, data);
+		ocp_reg_write(tp, 0xb87c, 0x8141);
+		ocp_reg_write(tp, 0xb87e, 0x320e);
+		ocp_reg_write(tp, 0xb87c, 0x8153);
+		ocp_reg_write(tp, 0xb87e, 0x720e);
+		ocp_reg_write(tp, 0xb87c, 0x8529);
+		ocp_reg_write(tp, 0xb87e, 0x050e);
+		data = ocp_reg_read(tp, OCP_EEE_CFG);
+		data &= ~CTAP_SHORT_EN;
+		ocp_reg_write(tp, OCP_EEE_CFG, data);
+
+		sram_write(tp, 0x816c, 0xc4a0);
+		sram_write(tp, 0x8170, 0xc4a0);
+		sram_write(tp, 0x8174, 0x04a0);
+		sram_write(tp, 0x8178, 0x04a0);
+		sram_write(tp, 0x817c, 0x0719);
+		sram_write(tp, 0x8ff4, 0x0400);
+		sram_write(tp, 0x8ff1, 0x0404);
+
+		ocp_reg_write(tp, 0xbf4a, 0x001b);
+		ocp_reg_write(tp, 0xb87c, 0x8033);
+		ocp_reg_write(tp, 0xb87e, 0x7c13);
+		ocp_reg_write(tp, 0xb87c, 0x8037);
+		ocp_reg_write(tp, 0xb87e, 0x7c13);
+		ocp_reg_write(tp, 0xb87c, 0x803b);
+		ocp_reg_write(tp, 0xb87e, 0xfc32);
+		ocp_reg_write(tp, 0xb87c, 0x803f);
+		ocp_reg_write(tp, 0xb87e, 0x7c13);
+		ocp_reg_write(tp, 0xb87c, 0x8043);
+		ocp_reg_write(tp, 0xb87e, 0x7c13);
+		ocp_reg_write(tp, 0xb87c, 0x8047);
+		ocp_reg_write(tp, 0xb87e, 0x7c13);
+
+		ocp_reg_write(tp, 0xb87c, 0x8145);
+		ocp_reg_write(tp, 0xb87e, 0x370e);
+		ocp_reg_write(tp, 0xb87c, 0x8157);
+		ocp_reg_write(tp, 0xb87e, 0x770e);
+		ocp_reg_write(tp, 0xb87c, 0x8169);
+		ocp_reg_write(tp, 0xb87e, 0x0d0a);
+		ocp_reg_write(tp, 0xb87c, 0x817b);
+		ocp_reg_write(tp, 0xb87e, 0x1d0a);
+
+		data = sram_read(tp, 0x8217);
+		data &= ~0xff00;
+		data |= 0x5000;
+		sram_write(tp, 0x8217, data);
+		data = sram_read(tp, 0x821a);
+		data &= ~0xff00;
+		data |= 0x5000;
+		sram_write(tp, 0x821a, data);
+		sram_write(tp, 0x80da, 0x0403);
+		data = sram_read(tp, 0x80dc);
+		data &= ~0xff00;
+		data |= 0x1000;
+		sram_write(tp, 0x80dc, data);
+		sram_write(tp, 0x80b3, 0x0384);
+		sram_write(tp, 0x80b7, 0x2007);
+		data = sram_read(tp, 0x80ba);
+		data &= ~0xff00;
+		data |= 0x6c00;
+		sram_write(tp, 0x80ba, data);
+		sram_write(tp, 0x80b5, 0xf009);
+		data = sram_read(tp, 0x80bd);
+		data &= ~0xff00;
+		data |= 0x9f00;
+		sram_write(tp, 0x80bd, data);
+		sram_write(tp, 0x80c7, 0xf083);
+		sram_write(tp, 0x80dd, 0x03f0);
+		data = sram_read(tp, 0x80df);
+		data &= ~0xff00;
+		data |= 0x1000;
+		sram_write(tp, 0x80df, data);
+		sram_write(tp, 0x80cb, 0x2007);
+		data = sram_read(tp, 0x80ce);
+		data &= ~0xff00;
+		data |= 0x6c00;
+		sram_write(tp, 0x80ce, data);
+		sram_write(tp, 0x80c9, 0x8009);
+		data = sram_read(tp, 0x80d1);
+		data &= ~0xff00;
+		data |= 0x8000;
+		sram_write(tp, 0x80d1, data);
+		sram_write(tp, 0x80a3, 0x200a);
+		sram_write(tp, 0x80a5, 0xf0ad);
+		sram_write(tp, 0x809f, 0x6073);
+		sram_write(tp, 0x80a1, 0x000b);
+		data = sram_read(tp, 0x80a9);
+		data &= ~0xff00;
+		data |= 0xc000;
+		sram_write(tp, 0x80a9, data);
+
+		if (rtl_phy_patch_request(tp, true, true))
+			return;
+
+		data = ocp_reg_read(tp, 0xb896);
+		data &= ~BIT(0);
+		ocp_reg_write(tp, 0xb896, data);
+		data = ocp_reg_read(tp, 0xb892);
+		data &= ~0xff00;
+		ocp_reg_write(tp, 0xb892, data);
+		ocp_reg_write(tp, 0xb88e, 0xc23e);
+		ocp_reg_write(tp, 0xb890, 0x0000);
+		ocp_reg_write(tp, 0xb88e, 0xc240);
+		ocp_reg_write(tp, 0xb890, 0x0103);
+		ocp_reg_write(tp, 0xb88e, 0xc242);
+		ocp_reg_write(tp, 0xb890, 0x0507);
+		ocp_reg_write(tp, 0xb88e, 0xc244);
+		ocp_reg_write(tp, 0xb890, 0x090b);
+		ocp_reg_write(tp, 0xb88e, 0xc246);
+		ocp_reg_write(tp, 0xb890, 0x0c0e);
+		ocp_reg_write(tp, 0xb88e, 0xc248);
+		ocp_reg_write(tp, 0xb890, 0x1012);
+		ocp_reg_write(tp, 0xb88e, 0xc24a);
+		ocp_reg_write(tp, 0xb890, 0x1416);
+		data = ocp_reg_read(tp, 0xb896);
+		data |= BIT(0);
+		ocp_reg_write(tp, 0xb896, data);
+
+		rtl_phy_patch_request(tp, false, true);
+
+		data = ocp_reg_read(tp, 0xa86a);
+		data |= BIT(0);
+		ocp_reg_write(tp, 0xa86a, data);
+		data = ocp_reg_read(tp, 0xa6f0);
+		data |= BIT(0);
+		ocp_reg_write(tp, 0xa6f0, data);
+
+		ocp_reg_write(tp, 0xbfa0, 0xd70d);
+		ocp_reg_write(tp, 0xbfa2, 0x4100);
+		ocp_reg_write(tp, 0xbfa4, 0xe868);
+		ocp_reg_write(tp, 0xbfa6, 0xdc59);
+		ocp_reg_write(tp, 0xb54c, 0x3c18);
+		data = ocp_reg_read(tp, 0xbfa4);
+		data &= ~BIT(5);
+		ocp_reg_write(tp, 0xbfa4, data);
+		data = sram_read(tp, 0x817d);
+		data |= BIT(12);
+		sram_write(tp, 0x817d, data);
+		break;
+	case RTL_VER_13:
+		/* 2.5G INRX */
+		data = ocp_reg_read(tp, 0xac46);
+		data &= ~0x00f0;
+		data |= 0x0090;
+		ocp_reg_write(tp, 0xac46, data);
+		data = ocp_reg_read(tp, 0xad30);
+		data &= ~0x0003;
+		data |= 0x0001;
+		ocp_reg_write(tp, 0xad30, data);
+		fallthrough;
+	case RTL_VER_15:
+		/* EEE parameter */
+		ocp_reg_write(tp, 0xb87c, 0x80f5);
+		ocp_reg_write(tp, 0xb87e, 0x760e);
+		ocp_reg_write(tp, 0xb87c, 0x8107);
+		ocp_reg_write(tp, 0xb87e, 0x360e);
+		ocp_reg_write(tp, 0xb87c, 0x8551);
+		data = ocp_reg_read(tp, 0xb87e);
+		data &= ~0xff00;
+		data |= 0x0800;
+		ocp_reg_write(tp, 0xb87e, data);
+
+		/* ADC_PGA parameter */
+		data = ocp_reg_read(tp, 0xbf00);
+		data &= ~0xe000;
+		data |= 0xa000;
+		ocp_reg_write(tp, 0xbf00, data);
+		data = ocp_reg_read(tp, 0xbf46);
+		data &= ~0x0f00;
+		data |= 0x0300;
+		ocp_reg_write(tp, 0xbf46, data);
+
+		/* Green Table-PGA, 1G full viterbi */
+		sram_write(tp, 0x8044, 0x2417);
+		sram_write(tp, 0x804a, 0x2417);
+		sram_write(tp, 0x8050, 0x2417);
+		sram_write(tp, 0x8056, 0x2417);
+		sram_write(tp, 0x805c, 0x2417);
+		sram_write(tp, 0x8062, 0x2417);
+		sram_write(tp, 0x8068, 0x2417);
+		sram_write(tp, 0x806e, 0x2417);
+		sram_write(tp, 0x8074, 0x2417);
+		sram_write(tp, 0x807a, 0x2417);
+
+		/* XG PLL */
+		data = ocp_reg_read(tp, 0xbf84);
+		data &= ~0xe000;
+		data |= 0xa000;
+		ocp_reg_write(tp, 0xbf84, data);
+		break;
+	default:
+		break;
+	}
+
+	/* Notify the MAC when the speed is changed to force mode. */
+	data = ocp_reg_read(tp, OCP_INTR_EN);
+	data |= INTR_SPEED_FORCE;
+	ocp_reg_write(tp, OCP_INTR_EN, data);
+
+	if (rtl_phy_patch_request(tp, true, true))
+		return;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
+	ocp_data |= EEE_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+
+	data = ocp_reg_read(tp, OCP_DOWN_SPEED);
+	data &= ~(EN_EEE_100 | EN_EEE_1000);
+	data |= EN_10M_CLKDIV;
+	ocp_reg_write(tp, OCP_DOWN_SPEED, data);
+	tp->ups_info._10m_ckdiv = true;
+	tp->ups_info.eee_plloff_100 = false;
+	tp->ups_info.eee_plloff_giga = false;
+
+	data = ocp_reg_read(tp, OCP_POWER_CFG);
+	data &= ~EEE_CLKDIV_EN;
+	ocp_reg_write(tp, OCP_POWER_CFG, data);
+	tp->ups_info.eee_ckdiv = false;
+
+	rtl_phy_patch_request(tp, false, true);
+
+	rtl_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
+
+	data = ocp_reg_read(tp, 0xa428);
+	data &= ~BIT(9);
+	ocp_reg_write(tp, 0xa428, data);
+	data = ocp_reg_read(tp, 0xa5ea);
+	data &= ~BIT(0);
+	ocp_reg_write(tp, 0xa5ea, data);
+	tp->ups_info.lite_mode = 0;
+
+	if (tp->eee_en)
+		rtl_eee_enable(tp, true);
+
+	r8153_aldps_en(tp, true);
+	r8152b_enable_fc(tp);
+	r8153_u2p3en(tp, true);
+
+	set_bit(PHY_RESET, &tp->flags);
+}
+
+static void r8156_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+	int i;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
+	ocp_data &= ~EN_ALL_SPEED;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
+
+	ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
+	ocp_data |= BYPASS_MAC_RESET;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
+
+	r8153b_u1u2en(tp, false);
+
+	for (i = 0; i < 500; i++) {
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+		    AUTOLOAD_DONE)
+			break;
+
+		msleep(20);
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			return;
+	}
+
+	data = r8153_phy_status(tp, 0);
+	if (data == PHY_STAT_EXT_INIT) {
+		data = ocp_reg_read(tp, 0xa468);
+		data &= ~(BIT(3) | BIT(1));
+		ocp_reg_write(tp, 0xa468, data);
+	}
+
+	data = r8152_mdio_read(tp, MII_BMCR);
+	if (data & BMCR_PDOWN) {
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+	}
+
+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+	WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
+
+	r8153_u2p3en(tp, false);
+
+	/* MSC timer = 0xfff * 8ms = 32760 ms */
+	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
+
+	/* U1/U2/L1 idle timer. 500 us */
+	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
+
+	r8153b_power_cut_en(tp, false);
+	r8156_ups_en(tp, false);
+	r8153_queue_wake(tp, false);
+	rtl_runtime_suspend_enable(tp, false);
+
+	if (tp->udev->speed >= USB_SPEED_SUPER)
+		r8153b_u1u2en(tp, true);
+
+	usb_enable_lpm(tp->udev);
+
+	r8156_mac_clk_spd(tp, true);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data &= ~PLA_MCU_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+	if (rtl8152_get_speed(tp) & LINK_STATUS)
+		ocp_data |= CUR_LINK_OK;
+	else
+		ocp_data &= ~CUR_LINK_OK;
+	ocp_data |= POLL_LINK_CHG;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+
+	set_bit(GREEN_ETHERNET, &tp->flags);
+
+	/* rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
+	ocp_data |= ACT_ODMA;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
+
+	r8156_mdio_force_mode(tp);
+	rtl_tally_reset(tp);
+
+	tp->coalesce = 15000;	/* 15 us */
+}
+
+static void r8156b_init(struct r8152 *tp)
+{
+	u32 ocp_data;
+	u16 data;
+	int i;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
+	ocp_data &= ~EN_ALL_SPEED;
+	ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
+
+	ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
+	ocp_data |= BYPASS_MAC_RESET;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
+	ocp_data |= RX_DETECT8;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
+
+	r8153b_u1u2en(tp, false);
+
+	switch (tp->version) {
+	case RTL_VER_13:
+	case RTL_VER_15:
+		r8156b_wait_loading_flash(tp);
+		break;
+	default:
+		break;
+	}
+
+	for (i = 0; i < 500; i++) {
+		if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+		    AUTOLOAD_DONE)
+			break;
+
+		msleep(20);
+		if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+			return;
+	}
+
+	data = r8153_phy_status(tp, 0);
+	if (data == PHY_STAT_EXT_INIT) {
+		data = ocp_reg_read(tp, 0xa468);
+		data &= ~(BIT(3) | BIT(1));
+		ocp_reg_write(tp, 0xa468, data);
+
+		data = ocp_reg_read(tp, 0xa466);
+		data &= ~BIT(0);
+		ocp_reg_write(tp, 0xa466, data);
+	}
+
+	data = r8152_mdio_read(tp, MII_BMCR);
+	if (data & BMCR_PDOWN) {
+		data &= ~BMCR_PDOWN;
+		r8152_mdio_write(tp, MII_BMCR, data);
+	}
+
+	data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+
+	r8153_u2p3en(tp, false);
+
+	/* MSC timer = 0xfff * 8ms = 32760 ms */
+	ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
+
+	/* U1/U2/L1 idle timer. 500 us */
+	ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
+
+	r8153b_power_cut_en(tp, false);
+	r8156_ups_en(tp, false);
+	r8153_queue_wake(tp, false);
+	rtl_runtime_suspend_enable(tp, false);
+
+	if (tp->udev->speed >= USB_SPEED_SUPER)
+		r8153b_u1u2en(tp, true);
+
+	usb_enable_lpm(tp->udev);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR);
+	ocp_data &= ~SLOT_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
+	ocp_data |= FLOW_CTRL_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+
+	/* enable fc timer and set timer to 600 ms. */
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
+		       CTRL_TIMER_EN | (600 / 8));
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
+	if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & DACK_DET_EN))
+		ocp_data |= FLOW_CTRL_PATCH_2;
+	ocp_data &= ~AUTO_SPEEDUP;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
+	ocp_data |= FC_PATCH_TASK;
+	ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+
+	r8156_mac_clk_spd(tp, true);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
+	ocp_data &= ~PLA_MCU_SPDWN_EN;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+	if (rtl8152_get_speed(tp) & LINK_STATUS)
+		ocp_data |= CUR_LINK_OK;
+	else
+		ocp_data &= ~CUR_LINK_OK;
+	ocp_data |= POLL_LINK_CHG;
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+
+	set_bit(GREEN_ETHERNET, &tp->flags);
+
+	/* rx aggregation */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+	ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
+	ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+
+	r8156_mdio_force_mode(tp);
+	rtl_tally_reset(tp);
+
+	tp->coalesce = 15000;	/* 15 us */
+}
+
+static bool rtl_check_vendor_ok(struct usb_interface *intf)
+{
+	struct usb_host_interface *alt = intf->cur_altsetting;
+	struct usb_endpoint_descriptor *in, *out, *intr;
+
+	if (usb_find_common_endpoints(alt, &in, &out, &intr, NULL) < 0) {
+		dev_err(&intf->dev, "Expected endpoints are not found\n");
+		return false;
+	}
+
+	/* Check Rx endpoint address */
+	if (usb_endpoint_num(in) != 1) {
+		dev_err(&intf->dev, "Invalid Rx endpoint address\n");
+		return false;
+	}
+
+	/* Check Tx endpoint address */
+	if (usb_endpoint_num(out) != 2) {
+		dev_err(&intf->dev, "Invalid Tx endpoint address\n");
+		return false;
+	}
+
+	/* Check interrupt endpoint address */
+	if (usb_endpoint_num(intr) != 3) {
+		dev_err(&intf->dev, "Invalid interrupt endpoint address\n");
+		return false;
+	}
+
+	return true;
+}
+
+static int rtl8152_pre_reset(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+	struct net_device *netdev;
+
+	if (!tp)
+		return 0;
+
+	netdev = tp->netdev;
+	if (!netif_running(netdev))
+		return 0;
+
+	netif_stop_queue(netdev);
+	tasklet_disable(&tp->tx_tl);
+	clear_bit(WORK_ENABLE, &tp->flags);
+	usb_kill_urb(tp->intr_urb);
+	cancel_delayed_work_sync(&tp->schedule);
+	napi_disable(&tp->napi);
+	if (netif_carrier_ok(netdev)) {
+		mutex_lock(&tp->control);
+		tp->rtl_ops.disable(tp);
+		mutex_unlock(&tp->control);
+	}
+
+	return 0;
+}
+
+static int rtl8152_post_reset(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+	struct net_device *netdev;
+	struct sockaddr sa;
+
+	if (!tp)
+		return 0;
+
+	/* reset the MAC address in case of policy change */
+	if (determine_ethernet_addr(tp, &sa) >= 0) {
+		rtnl_lock();
+		dev_set_mac_address (tp->netdev, &sa, NULL);
+		rtnl_unlock();
+	}
+
+	netdev = tp->netdev;
+	if (!netif_running(netdev))
+		return 0;
+
+	set_bit(WORK_ENABLE, &tp->flags);
+	if (netif_carrier_ok(netdev)) {
+		mutex_lock(&tp->control);
+		tp->rtl_ops.enable(tp);
+		rtl_start_rx(tp);
+		_rtl8152_set_rx_mode(netdev);
+		mutex_unlock(&tp->control);
+	}
+
+	napi_enable(&tp->napi);
+	tasklet_enable(&tp->tx_tl);
+	netif_wake_queue(netdev);
+	usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+
+	if (!list_empty(&tp->rx_done))
+		napi_schedule(&tp->napi);
+
+	return 0;
+}
+
+static bool delay_autosuspend(struct r8152 *tp)
+{
+	bool sw_linking = !!netif_carrier_ok(tp->netdev);
+	bool hw_linking = !!(rtl8152_get_speed(tp) & LINK_STATUS);
+
+	/* This means a linking change occurs and the driver doesn't detect it,
+	 * yet. If the driver has disabled tx/rx and hw is linking on, the
+	 * device wouldn't wake up by receiving any packet.
+	 */
+	if (work_busy(&tp->schedule.work) || sw_linking != hw_linking)
+		return true;
+
+	/* If the linking down is occurred by nway, the device may miss the
+	 * linking change event. And it wouldn't wake when linking on.
+	 */
+	if (!sw_linking && tp->rtl_ops.in_nway(tp))
+		return true;
+	else if (!skb_queue_empty(&tp->tx_queue))
+		return true;
+	else
+		return false;
+}
+
+static int rtl8152_runtime_resume(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+
+	if (netif_running(netdev) && netdev->flags & IFF_UP) {
+		struct napi_struct *napi = &tp->napi;
+
+		tp->rtl_ops.autosuspend_en(tp, false);
+		napi_disable(napi);
+		set_bit(WORK_ENABLE, &tp->flags);
+
+		if (netif_carrier_ok(netdev)) {
+			if (rtl8152_get_speed(tp) & LINK_STATUS) {
+				rtl_start_rx(tp);
+			} else {
+				netif_carrier_off(netdev);
+				tp->rtl_ops.disable(tp);
+				netif_info(tp, link, netdev, "linking down\n");
+			}
+		}
+
+		napi_enable(napi);
+		clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+		smp_mb__after_atomic();
+
+		if (!list_empty(&tp->rx_done))
+			napi_schedule(&tp->napi);
+
+		usb_submit_urb(tp->intr_urb, GFP_NOIO);
+	} else {
+		if (netdev->flags & IFF_UP)
+			tp->rtl_ops.autosuspend_en(tp, false);
+
+		clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+	}
+
+	return 0;
+}
+
+static int rtl8152_system_resume(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+
+	netif_device_attach(netdev);
+
+	if (netif_running(netdev) && (netdev->flags & IFF_UP)) {
+		tp->rtl_ops.up(tp);
+		netif_carrier_off(netdev);
+		set_bit(WORK_ENABLE, &tp->flags);
+		usb_submit_urb(tp->intr_urb, GFP_NOIO);
+	}
+
+	return 0;
+}
+
+static int rtl8152_runtime_suspend(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+	int ret = 0;
+
+	if (!tp->rtl_ops.autosuspend_en)
+		return -EBUSY;
+
+	set_bit(SELECTIVE_SUSPEND, &tp->flags);
+	smp_mb__after_atomic();
+
+	if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
+		u32 rcr = 0;
+
+		if (netif_carrier_ok(netdev)) {
+			u32 ocp_data;
+
+			rcr = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
+			ocp_data = rcr & ~RCR_ACPT_ALL;
+			ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+			rxdy_gated_en(tp, true);
+			ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA,
+						 PLA_OOB_CTRL);
+			if (!(ocp_data & RXFIFO_EMPTY)) {
+				rxdy_gated_en(tp, false);
+				ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
+				clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+				smp_mb__after_atomic();
+				ret = -EBUSY;
+				goto out1;
+			}
+		}
+
+		clear_bit(WORK_ENABLE, &tp->flags);
+		usb_kill_urb(tp->intr_urb);
+
+		tp->rtl_ops.autosuspend_en(tp, true);
+
+		if (netif_carrier_ok(netdev)) {
+			struct napi_struct *napi = &tp->napi;
+
+			napi_disable(napi);
+			rtl_stop_rx(tp);
+			rxdy_gated_en(tp, false);
+			ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, rcr);
+			napi_enable(napi);
+		}
+
+		if (delay_autosuspend(tp)) {
+			rtl8152_runtime_resume(tp);
+			ret = -EBUSY;
+		}
+	}
+
+out1:
+	return ret;
+}
+
+static int rtl8152_system_suspend(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
+		struct napi_struct *napi = &tp->napi;
+
+		clear_bit(WORK_ENABLE, &tp->flags);
+		usb_kill_urb(tp->intr_urb);
+		tasklet_disable(&tp->tx_tl);
+		napi_disable(napi);
+		cancel_delayed_work_sync(&tp->schedule);
+		tp->rtl_ops.down(tp);
+		napi_enable(napi);
+		tasklet_enable(&tp->tx_tl);
+	}
+
+	return 0;
+}
+
+static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+	int ret;
+
+	mutex_lock(&tp->control);
+
+	if (PMSG_IS_AUTO(message))
+		ret = rtl8152_runtime_suspend(tp);
+	else
+		ret = rtl8152_system_suspend(tp);
+
+	mutex_unlock(&tp->control);
+
+	return ret;
+}
+
+static int rtl8152_resume(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+	int ret;
+
+	mutex_lock(&tp->control);
+
+	rtl_reset_ocp_base(tp);
+
+	if (test_bit(SELECTIVE_SUSPEND, &tp->flags))
+		ret = rtl8152_runtime_resume(tp);
+	else
+		ret = rtl8152_system_resume(tp);
+
+	mutex_unlock(&tp->control);
+
+	return ret;
+}
+
+static int rtl8152_reset_resume(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+	rtl_reset_ocp_base(tp);
+	tp->rtl_ops.init(tp);
+	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
+	set_ethernet_addr(tp, true);
+	return rtl8152_resume(intf);
+}
+
+static void rtl8152_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	if (usb_autopm_get_interface(tp->intf) < 0)
+		return;
+
+	if (!rtl_can_wakeup(tp)) {
+		wol->supported = 0;
+		wol->wolopts = 0;
+	} else {
+		mutex_lock(&tp->control);
+		wol->supported = WAKE_ANY;
+		wol->wolopts = __rtl_get_wol(tp);
+		mutex_unlock(&tp->control);
+	}
+
+	usb_autopm_put_interface(tp->intf);
+}
+
+static int rtl8152_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	struct r8152 *tp = netdev_priv(dev);
+	int ret;
+
+	if (!rtl_can_wakeup(tp))
+		return -EOPNOTSUPP;
+
+	if (wol->wolopts & ~WAKE_ANY)
+		return -EINVAL;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out_set_wol;
+
+	mutex_lock(&tp->control);
+
+	__rtl_set_wol(tp, wol->wolopts);
+	tp->saved_wolopts = wol->wolopts & WAKE_ANY;
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+out_set_wol:
+	return ret;
+}
+
+static u32 rtl8152_get_msglevel(struct net_device *dev)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	return tp->msg_enable;
+}
+
+static void rtl8152_set_msglevel(struct net_device *dev, u32 value)
+{
+	struct r8152 *tp = netdev_priv(dev);
+
+	tp->msg_enable = value;
+}
+
+static void rtl8152_get_drvinfo(struct net_device *netdev,
+				struct ethtool_drvinfo *info)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	strscpy(info->driver, MODULENAME, sizeof(info->driver));
+	strscpy(info->version, DRIVER_VERSION, sizeof(info->version));
+	usb_make_path(tp->udev, info->bus_info, sizeof(info->bus_info));
+	if (!IS_ERR_OR_NULL(tp->rtl_fw.fw))
+		strscpy(info->fw_version, tp->rtl_fw.version,
+			sizeof(info->fw_version));
+}
+
+static
+int rtl8152_get_link_ksettings(struct net_device *netdev,
+			       struct ethtool_link_ksettings *cmd)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int ret;
+
+	if (!tp->mii.mdio_read)
+		return -EOPNOTSUPP;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
+
+	mutex_lock(&tp->control);
+
+	mii_ethtool_get_link_ksettings(&tp->mii, cmd);
+
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			 cmd->link_modes.supported, tp->support_2500full);
+
+	if (tp->support_2500full) {
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+				 cmd->link_modes.advertising,
+				 ocp_reg_read(tp, OCP_10GBT_CTRL) & MDIO_AN_10GBT_CTRL_ADV2_5G);
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+				 cmd->link_modes.lp_advertising,
+				 ocp_reg_read(tp, OCP_10GBT_STAT) & MDIO_AN_10GBT_STAT_LP2_5G);
+
+		if (is_speed_2500(rtl8152_get_speed(tp)))
+			cmd->base.speed = SPEED_2500;
+	}
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
+}
+
+static int rtl8152_set_link_ksettings(struct net_device *dev,
+				      const struct ethtool_link_ksettings *cmd)
+{
+	struct r8152 *tp = netdev_priv(dev);
+	u32 advertising = 0;
+	int ret;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
+
+	if (test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+		     cmd->link_modes.advertising))
+		advertising |= RTL_ADVERTISED_10_HALF;
+
+	if (test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+		     cmd->link_modes.advertising))
+		advertising |= RTL_ADVERTISED_10_FULL;
+
+	if (test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+		     cmd->link_modes.advertising))
+		advertising |= RTL_ADVERTISED_100_HALF;
+
+	if (test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+		     cmd->link_modes.advertising))
+		advertising |= RTL_ADVERTISED_100_FULL;
+
+	if (test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+		     cmd->link_modes.advertising))
+		advertising |= RTL_ADVERTISED_1000_HALF;
+
+	if (test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+		     cmd->link_modes.advertising))
+		advertising |= RTL_ADVERTISED_1000_FULL;
+
+	if (test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+		     cmd->link_modes.advertising))
+		advertising |= RTL_ADVERTISED_2500_FULL;
+
+	mutex_lock(&tp->control);
+
+	ret = rtl8152_set_speed(tp, cmd->base.autoneg, cmd->base.speed,
+				cmd->base.duplex, advertising);
+	if (!ret) {
+		tp->autoneg = cmd->base.autoneg;
+		tp->speed = cmd->base.speed;
+		tp->duplex = cmd->base.duplex;
+		tp->advertising = advertising;
+	}
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
+}
+
+static const char rtl8152_gstrings[][ETH_GSTRING_LEN] = {
+	"tx_packets",
+	"rx_packets",
+	"tx_errors",
+	"rx_errors",
+	"rx_missed",
+	"align_errors",
+	"tx_single_collisions",
+	"tx_multi_collisions",
+	"rx_unicast",
+	"rx_broadcast",
+	"rx_multicast",
+	"tx_aborted",
+	"tx_underrun",
+};
+
+static int rtl8152_get_sset_count(struct net_device *dev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_STATS:
+		return ARRAY_SIZE(rtl8152_gstrings);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static void rtl8152_get_ethtool_stats(struct net_device *dev,
+				      struct ethtool_stats *stats, u64 *data)
+{
+	struct r8152 *tp = netdev_priv(dev);
+	struct tally_counter tally;
+
+	if (usb_autopm_get_interface(tp->intf) < 0)
+		return;
+
+	generic_ocp_read(tp, PLA_TALLYCNT, sizeof(tally), &tally, MCU_TYPE_PLA);
+
+	usb_autopm_put_interface(tp->intf);
+
+	data[0] = le64_to_cpu(tally.tx_packets);
+	data[1] = le64_to_cpu(tally.rx_packets);
+	data[2] = le64_to_cpu(tally.tx_errors);
+	data[3] = le32_to_cpu(tally.rx_errors);
+	data[4] = le16_to_cpu(tally.rx_missed);
+	data[5] = le16_to_cpu(tally.align_errors);
+	data[6] = le32_to_cpu(tally.tx_one_collision);
+	data[7] = le32_to_cpu(tally.tx_multi_collision);
+	data[8] = le64_to_cpu(tally.rx_unicast);
+	data[9] = le64_to_cpu(tally.rx_broadcast);
+	data[10] = le32_to_cpu(tally.rx_multicast);
+	data[11] = le16_to_cpu(tally.tx_aborted);
+	data[12] = le16_to_cpu(tally.tx_underrun);
+}
+
+static void rtl8152_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	switch (stringset) {
+	case ETH_SS_STATS:
+		memcpy(data, rtl8152_gstrings, sizeof(rtl8152_gstrings));
+		break;
+	}
+}
+
+static int r8152_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+	u32 lp, adv, supported = 0;
+	u16 val;
+
+	val = r8152_mmd_read(tp, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
+	supported = mmd_eee_cap_to_ethtool_sup_t(val);
+
+	val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
+	adv = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
+	lp = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	eee->eee_enabled = tp->eee_en;
+	eee->eee_active = !!(supported & adv & lp);
+	eee->supported = supported;
+	eee->advertised = tp->eee_adv;
+	eee->lp_advertised = lp;
+
+	return 0;
+}
+
+static int r8152_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+	u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
+
+	tp->eee_en = eee->eee_enabled;
+	tp->eee_adv = val;
+
+	rtl_eee_enable(tp, tp->eee_en);
+
+	return 0;
+}
+
+static int r8153_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+	u32 lp, adv, supported = 0;
+	u16 val;
+
+	val = ocp_reg_read(tp, OCP_EEE_ABLE);
+	supported = mmd_eee_cap_to_ethtool_sup_t(val);
+
+	val = ocp_reg_read(tp, OCP_EEE_ADV);
+	adv = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	val = ocp_reg_read(tp, OCP_EEE_LPABLE);
+	lp = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	eee->eee_enabled = tp->eee_en;
+	eee->eee_active = !!(supported & adv & lp);
+	eee->supported = supported;
+	eee->advertised = tp->eee_adv;
+	eee->lp_advertised = lp;
+
+	return 0;
+}
+
+static int
+rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct r8152 *tp = netdev_priv(net);
+	int ret;
+
+	if (!tp->rtl_ops.eee_get) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
+
+	mutex_lock(&tp->control);
+
+	ret = tp->rtl_ops.eee_get(tp, edata);
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
+}
+
+static int
+rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct r8152 *tp = netdev_priv(net);
+	int ret;
+
+	if (!tp->rtl_ops.eee_set) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
+
+	mutex_lock(&tp->control);
+
+	ret = tp->rtl_ops.eee_set(tp, edata);
+	if (!ret)
+		ret = mii_nway_restart(&tp->mii);
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
+}
+
+static int rtl8152_nway_reset(struct net_device *dev)
+{
+	struct r8152 *tp = netdev_priv(dev);
+	int ret;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
+
+	mutex_lock(&tp->control);
+
+	ret = mii_nway_restart(&tp->mii);
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
+}
+
+static int rtl8152_get_coalesce(struct net_device *netdev,
+				struct ethtool_coalesce *coalesce,
+				struct kernel_ethtool_coalesce *kernel_coal,
+				struct netlink_ext_ack *extack)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_07:
+		return -EOPNOTSUPP;
+	default:
+		break;
+	}
+
+	coalesce->rx_coalesce_usecs = tp->coalesce;
+
+	return 0;
+}
+
+static int rtl8152_set_coalesce(struct net_device *netdev,
+				struct ethtool_coalesce *coalesce,
+				struct kernel_ethtool_coalesce *kernel_coal,
+				struct netlink_ext_ack *extack)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int ret;
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_07:
+		return -EOPNOTSUPP;
+	default:
+		break;
+	}
+
+	if (coalesce->rx_coalesce_usecs > COALESCE_SLOW)
+		return -EINVAL;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&tp->control);
+
+	if (tp->coalesce != coalesce->rx_coalesce_usecs) {
+		tp->coalesce = coalesce->rx_coalesce_usecs;
+
+		if (netif_running(netdev) && netif_carrier_ok(netdev)) {
+			netif_stop_queue(netdev);
+			napi_disable(&tp->napi);
+			tp->rtl_ops.disable(tp);
+			tp->rtl_ops.enable(tp);
+			rtl_start_rx(tp);
+			clear_bit(RTL8152_SET_RX_MODE, &tp->flags);
+			_rtl8152_set_rx_mode(netdev);
+			napi_enable(&tp->napi);
+			netif_wake_queue(netdev);
+		}
+	}
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+	return ret;
+}
+
+static int rtl8152_get_tunable(struct net_device *netdev,
+			       const struct ethtool_tunable *tunable, void *d)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	switch (tunable->id) {
+	case ETHTOOL_RX_COPYBREAK:
+		*(u32 *)d = tp->rx_copybreak;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int rtl8152_set_tunable(struct net_device *netdev,
+			       const struct ethtool_tunable *tunable,
+			       const void *d)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	u32 val;
+
+	switch (tunable->id) {
+	case ETHTOOL_RX_COPYBREAK:
+		val = *(u32 *)d;
+		if (val < ETH_ZLEN) {
+			netif_err(tp, rx_err, netdev,
+				  "Invalid rx copy break value\n");
+			return -EINVAL;
+		}
+
+		if (tp->rx_copybreak != val) {
+			if (netdev->flags & IFF_UP) {
+				mutex_lock(&tp->control);
+				napi_disable(&tp->napi);
+				tp->rx_copybreak = val;
+				napi_enable(&tp->napi);
+				mutex_unlock(&tp->control);
+			} else {
+				tp->rx_copybreak = val;
+			}
+		}
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static void rtl8152_get_ringparam(struct net_device *netdev,
+				  struct ethtool_ringparam *ring,
+				  struct kernel_ethtool_ringparam *kernel_ring,
+				  struct netlink_ext_ack *extack)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	ring->rx_max_pending = RTL8152_RX_MAX_PENDING;
+	ring->rx_pending = tp->rx_pending;
+}
+
+static int rtl8152_set_ringparam(struct net_device *netdev,
+				 struct ethtool_ringparam *ring,
+				 struct kernel_ethtool_ringparam *kernel_ring,
+				 struct netlink_ext_ack *extack)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	if (ring->rx_pending < (RTL8152_MAX_RX * 2))
+		return -EINVAL;
+
+	if (tp->rx_pending != ring->rx_pending) {
+		if (netdev->flags & IFF_UP) {
+			mutex_lock(&tp->control);
+			napi_disable(&tp->napi);
+			tp->rx_pending = ring->rx_pending;
+			napi_enable(&tp->napi);
+			mutex_unlock(&tp->control);
+		} else {
+			tp->rx_pending = ring->rx_pending;
+		}
+	}
+
+	return 0;
+}
+
+static void rtl8152_get_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	u16 bmcr, lcladv, rmtadv;
+	u8 cap;
+
+	if (usb_autopm_get_interface(tp->intf) < 0)
+		return;
+
+	mutex_lock(&tp->control);
+
+	bmcr = r8152_mdio_read(tp, MII_BMCR);
+	lcladv = r8152_mdio_read(tp, MII_ADVERTISE);
+	rmtadv = r8152_mdio_read(tp, MII_LPA);
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+	if (!(bmcr & BMCR_ANENABLE)) {
+		pause->autoneg = 0;
+		pause->rx_pause = 0;
+		pause->tx_pause = 0;
+		return;
+	}
+
+	pause->autoneg = 1;
+
+	cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+
+	if (cap & FLOW_CTRL_RX)
+		pause->rx_pause = 1;
+
+	if (cap & FLOW_CTRL_TX)
+		pause->tx_pause = 1;
+}
+
+static int rtl8152_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	u16 old, new1;
+	u8 cap = 0;
+	int ret;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&tp->control);
+
+	if (pause->autoneg && !(r8152_mdio_read(tp, MII_BMCR) & BMCR_ANENABLE)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (pause->rx_pause)
+		cap |= FLOW_CTRL_RX;
+
+	if (pause->tx_pause)
+		cap |= FLOW_CTRL_TX;
+
+	old = r8152_mdio_read(tp, MII_ADVERTISE);
+	new1 = (old & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) | mii_advertise_flowctrl(cap);
+	if (old != new1)
+		r8152_mdio_write(tp, MII_ADVERTISE, new1);
+
+out:
+	mutex_unlock(&tp->control);
+	usb_autopm_put_interface(tp->intf);
+
+	return ret;
+}
+
+static const struct ethtool_ops ops = {
+	.supported_coalesce_params = ETHTOOL_COALESCE_USECS,
+	.get_drvinfo = rtl8152_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+	.nway_reset = rtl8152_nway_reset,
+	.get_msglevel = rtl8152_get_msglevel,
+	.set_msglevel = rtl8152_set_msglevel,
+	.get_wol = rtl8152_get_wol,
+	.set_wol = rtl8152_set_wol,
+	.get_strings = rtl8152_get_strings,
+	.get_sset_count = rtl8152_get_sset_count,
+	.get_ethtool_stats = rtl8152_get_ethtool_stats,
+	.get_coalesce = rtl8152_get_coalesce,
+	.set_coalesce = rtl8152_set_coalesce,
+	.get_eee = rtl_ethtool_get_eee,
+	.set_eee = rtl_ethtool_set_eee,
+	.get_link_ksettings = rtl8152_get_link_ksettings,
+	.set_link_ksettings = rtl8152_set_link_ksettings,
+	.get_tunable = rtl8152_get_tunable,
+	.set_tunable = rtl8152_set_tunable,
+	.get_ringparam = rtl8152_get_ringparam,
+	.set_ringparam = rtl8152_set_ringparam,
+	.get_pauseparam = rtl8152_get_pauseparam,
+	.set_pauseparam = rtl8152_set_pauseparam,
+};
+
+static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	struct mii_ioctl_data *data = if_mii(rq);
+	int res;
+
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return -ENODEV;
+
+	res = usb_autopm_get_interface(tp->intf);
+	if (res < 0)
+		goto out;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = R8152_PHY_ID; /* Internal PHY */
+		break;
+
+	case SIOCGMIIREG:
+		mutex_lock(&tp->control);
+		data->val_out = r8152_mdio_read(tp, data->reg_num);
+		mutex_unlock(&tp->control);
+		break;
+
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN)) {
+			res = -EPERM;
+			break;
+		}
+		mutex_lock(&tp->control);
+		r8152_mdio_write(tp, data->reg_num, data->val_in);
+		mutex_unlock(&tp->control);
+		break;
+
+	default:
+		res = -EOPNOTSUPP;
+	}
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return res;
+}
+
+static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
+{
+	struct r8152 *tp = netdev_priv(dev);
+	int ret;
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_07:
+		dev->mtu = new_mtu;
+		return 0;
+	default:
+		break;
+	}
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&tp->control);
+
+	dev->mtu = new_mtu;
+
+	if (netif_running(dev)) {
+		if (tp->rtl_ops.change_mtu)
+			tp->rtl_ops.change_mtu(tp);
+
+		if (netif_carrier_ok(dev)) {
+			netif_stop_queue(dev);
+			napi_disable(&tp->napi);
+			tasklet_disable(&tp->tx_tl);
+			tp->rtl_ops.disable(tp);
+			tp->rtl_ops.enable(tp);
+			rtl_start_rx(tp);
+			tasklet_enable(&tp->tx_tl);
+			napi_enable(&tp->napi);
+			rtl8152_set_rx_mode(dev);
+			netif_wake_queue(dev);
+		}
+	}
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+	return ret;
+}
+
+static const struct net_device_ops rtl8152_netdev_ops = {
+	.ndo_open		= rtl8152_open,
+	.ndo_stop		= rtl8152_close,
+	.ndo_eth_ioctl		= rtl8152_ioctl,
+	.ndo_start_xmit		= rtl8152_start_xmit,
+	.ndo_tx_timeout		= rtl8152_tx_timeout,
+	.ndo_set_features	= rtl8152_set_features,
+	.ndo_set_rx_mode	= rtl8152_set_rx_mode,
+	.ndo_set_mac_address	= rtl8152_set_mac_address,
+	.ndo_change_mtu		= rtl8152_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_features_check	= rtl8152_features_check,
+};
+
+static void rtl8152_unload(struct r8152 *tp)
+{
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	if (tp->version != RTL_VER_01)
+		r8152_power_cut_en(tp, true);
+}
+
+static void rtl8153_unload(struct r8152 *tp)
+{
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8153_power_cut_en(tp, false);
+}
+
+static void rtl8153b_unload(struct r8152 *tp)
+{
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8153b_power_cut_en(tp, false);
+}
+
+static int rtl_ops_init(struct r8152 *tp)
+{
+	struct rtl_ops *ops = &tp->rtl_ops;
+	int ret = 0;
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_07:
+		ops->init		= r8152b_init;
+		ops->enable		= rtl8152_enable;
+		ops->disable		= rtl8152_disable;
+		ops->up			= rtl8152_up;
+		ops->down		= rtl8152_down;
+		ops->unload		= rtl8152_unload;
+		ops->eee_get		= r8152_get_eee;
+		ops->eee_set		= r8152_set_eee;
+		ops->in_nway		= rtl8152_in_nway;
+		ops->hw_phy_cfg		= r8152b_hw_phy_cfg;
+		ops->autosuspend_en	= rtl_runtime_suspend_enable;
+		tp->rx_buf_sz		= 16 * 1024;
+		tp->eee_en		= true;
+		tp->eee_adv		= MDIO_EEE_100TX;
+		break;
+
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+		ops->init		= r8153_init;
+		ops->enable		= rtl8153_enable;
+		ops->disable		= rtl8153_disable;
+		ops->up			= rtl8153_up;
+		ops->down		= rtl8153_down;
+		ops->unload		= rtl8153_unload;
+		ops->eee_get		= r8153_get_eee;
+		ops->eee_set		= r8152_set_eee;
+		ops->in_nway		= rtl8153_in_nway;
+		ops->hw_phy_cfg		= r8153_hw_phy_cfg;
+		ops->autosuspend_en	= rtl8153_runtime_enable;
+		ops->change_mtu		= rtl8153_change_mtu;
+		if (tp->udev->speed < USB_SPEED_SUPER)
+			tp->rx_buf_sz	= 16 * 1024;
+		else
+			tp->rx_buf_sz	= 32 * 1024;
+		tp->eee_en		= true;
+		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
+		break;
+
+	case RTL_VER_08:
+	case RTL_VER_09:
+		ops->init		= r8153b_init;
+		ops->enable		= rtl8153_enable;
+		ops->disable		= rtl8153_disable;
+		ops->up			= rtl8153b_up;
+		ops->down		= rtl8153b_down;
+		ops->unload		= rtl8153b_unload;
+		ops->eee_get		= r8153_get_eee;
+		ops->eee_set		= r8152_set_eee;
+		ops->in_nway		= rtl8153_in_nway;
+		ops->hw_phy_cfg		= r8153b_hw_phy_cfg;
+		ops->autosuspend_en	= rtl8153b_runtime_enable;
+		ops->change_mtu		= rtl8153_change_mtu;
+		tp->rx_buf_sz		= 32 * 1024;
+		tp->eee_en		= true;
+		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
+		break;
+
+	case RTL_VER_11:
+		tp->eee_en		= true;
+		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
+		fallthrough;
+	case RTL_VER_10:
+		ops->init		= r8156_init;
+		ops->enable		= rtl8156_enable;
+		ops->disable		= rtl8156_disable;
+		ops->up			= rtl8156_up;
+		ops->down		= rtl8156_down;
+		ops->unload		= rtl8153_unload;
+		ops->eee_get		= r8153_get_eee;
+		ops->eee_set		= r8152_set_eee;
+		ops->in_nway		= rtl8153_in_nway;
+		ops->hw_phy_cfg		= r8156_hw_phy_cfg;
+		ops->autosuspend_en	= rtl8156_runtime_enable;
+		ops->change_mtu		= rtl8156_change_mtu;
+		tp->rx_buf_sz		= 48 * 1024;
+		tp->support_2500full	= 1;
+		break;
+
+	case RTL_VER_12:
+	case RTL_VER_13:
+		tp->support_2500full	= 1;
+		fallthrough;
+	case RTL_VER_15:
+		tp->eee_en		= true;
+		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
+		ops->init		= r8156b_init;
+		ops->enable		= rtl8156b_enable;
+		ops->disable		= rtl8153_disable;
+		ops->up			= rtl8156_up;
+		ops->down		= rtl8156_down;
+		ops->unload		= rtl8153_unload;
+		ops->eee_get		= r8153_get_eee;
+		ops->eee_set		= r8152_set_eee;
+		ops->in_nway		= rtl8153_in_nway;
+		ops->hw_phy_cfg		= r8156b_hw_phy_cfg;
+		ops->autosuspend_en	= rtl8156_runtime_enable;
+		ops->change_mtu		= rtl8156_change_mtu;
+		tp->rx_buf_sz		= 48 * 1024;
+		break;
+
+	case RTL_VER_14:
+		ops->init		= r8153c_init;
+		ops->enable		= rtl8153_enable;
+		ops->disable		= rtl8153_disable;
+		ops->up			= rtl8153c_up;
+		ops->down		= rtl8153b_down;
+		ops->unload		= rtl8153_unload;
+		ops->eee_get		= r8153_get_eee;
+		ops->eee_set		= r8152_set_eee;
+		ops->in_nway		= rtl8153_in_nway;
+		ops->hw_phy_cfg		= r8153c_hw_phy_cfg;
+		ops->autosuspend_en	= rtl8153c_runtime_enable;
+		ops->change_mtu		= rtl8153c_change_mtu;
+		tp->rx_buf_sz		= 32 * 1024;
+		tp->eee_en		= true;
+		tp->eee_adv		= MDIO_EEE_1000T | MDIO_EEE_100TX;
+		break;
+
+	default:
+		ret = -ENODEV;
+		dev_err(&tp->intf->dev, "Unknown Device\n");
+		break;
+	}
+
+	return ret;
+}
+
+#define FIRMWARE_8153A_2	"rtl_nic/rtl8153a-2.fw"
+#define FIRMWARE_8153A_3	"rtl_nic/rtl8153a-3.fw"
+#define FIRMWARE_8153A_4	"rtl_nic/rtl8153a-4.fw"
+#define FIRMWARE_8153B_2	"rtl_nic/rtl8153b-2.fw"
+#define FIRMWARE_8153C_1	"rtl_nic/rtl8153c-1.fw"
+#define FIRMWARE_8156A_2	"rtl_nic/rtl8156a-2.fw"
+#define FIRMWARE_8156B_2	"rtl_nic/rtl8156b-2.fw"
+
+MODULE_FIRMWARE(FIRMWARE_8153A_2);
+MODULE_FIRMWARE(FIRMWARE_8153A_3);
+MODULE_FIRMWARE(FIRMWARE_8153A_4);
+MODULE_FIRMWARE(FIRMWARE_8153B_2);
+MODULE_FIRMWARE(FIRMWARE_8153C_1);
+MODULE_FIRMWARE(FIRMWARE_8156A_2);
+MODULE_FIRMWARE(FIRMWARE_8156B_2);
+
+static int rtl_fw_init(struct r8152 *tp)
+{
+	struct rtl_fw *rtl_fw = &tp->rtl_fw;
+
+	switch (tp->version) {
+	case RTL_VER_04:
+		rtl_fw->fw_name		= FIRMWARE_8153A_2;
+		rtl_fw->pre_fw		= r8153_pre_firmware_1;
+		rtl_fw->post_fw		= r8153_post_firmware_1;
+		break;
+	case RTL_VER_05:
+		rtl_fw->fw_name		= FIRMWARE_8153A_3;
+		rtl_fw->pre_fw		= r8153_pre_firmware_2;
+		rtl_fw->post_fw		= r8153_post_firmware_2;
+		break;
+	case RTL_VER_06:
+		rtl_fw->fw_name		= FIRMWARE_8153A_4;
+		rtl_fw->post_fw		= r8153_post_firmware_3;
+		break;
+	case RTL_VER_09:
+		rtl_fw->fw_name		= FIRMWARE_8153B_2;
+		rtl_fw->pre_fw		= r8153b_pre_firmware_1;
+		rtl_fw->post_fw		= r8153b_post_firmware_1;
+		break;
+	case RTL_VER_11:
+		rtl_fw->fw_name		= FIRMWARE_8156A_2;
+		rtl_fw->post_fw		= r8156a_post_firmware_1;
+		break;
+	case RTL_VER_13:
+	case RTL_VER_15:
+		rtl_fw->fw_name		= FIRMWARE_8156B_2;
+		break;
+	case RTL_VER_14:
+		rtl_fw->fw_name		= FIRMWARE_8153C_1;
+		rtl_fw->pre_fw		= r8153b_pre_firmware_1;
+		rtl_fw->post_fw		= r8153c_post_firmware_1;
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static u8 __rtl_get_hw_ver(struct usb_device *udev)
+{
+	u32 ocp_data = 0;
+	__le32 *tmp;
+	u8 version;
+	int ret;
+
+	tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
+	if (!tmp)
+		return 0;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
+			      PLA_TCR0, MCU_TYPE_PLA, tmp, sizeof(*tmp),
+			      USB_CTRL_GET_TIMEOUT);
+	if (ret > 0)
+		ocp_data = (__le32_to_cpu(*tmp) >> 16) & VERSION_MASK;
+
+	kfree(tmp);
+
+	switch (ocp_data) {
+	case 0x4c00:
+		version = RTL_VER_01;
+		break;
+	case 0x4c10:
+		version = RTL_VER_02;
+		break;
+	case 0x5c00:
+		version = RTL_VER_03;
+		break;
+	case 0x5c10:
+		version = RTL_VER_04;
+		break;
+	case 0x5c20:
+		version = RTL_VER_05;
+		break;
+	case 0x5c30:
+		version = RTL_VER_06;
+		break;
+	case 0x4800:
+		version = RTL_VER_07;
+		break;
+	case 0x6000:
+		version = RTL_VER_08;
+		break;
+	case 0x6010:
+		version = RTL_VER_09;
+		break;
+	case 0x7010:
+		version = RTL_TEST_01;
+		break;
+	case 0x7020:
+		version = RTL_VER_10;
+		break;
+	case 0x7030:
+		version = RTL_VER_11;
+		break;
+	case 0x7400:
+		version = RTL_VER_12;
+		break;
+	case 0x7410:
+		version = RTL_VER_13;
+		break;
+	case 0x6400:
+		version = RTL_VER_14;
+		break;
+	case 0x7420:
+		version = RTL_VER_15;
+		break;
+	default:
+		version = RTL_VER_UNKNOWN;
+		dev_info(&udev->dev, "Unknown version 0x%04x\n", ocp_data);
+		break;
+	}
+
+	return version;
+}
+
+u8 rtl8152_get_version(struct usb_interface *intf)
+{
+	u8 version;
+
+	version = __rtl_get_hw_ver(interface_to_usbdev(intf));
+
+	dev_dbg(&intf->dev, "Detected version 0x%04x\n", version);
+
+	return version;
+}
+EXPORT_SYMBOL_GPL(rtl8152_get_version);
+
+static bool rtl8152_supports_lenovo_macpassthru(struct usb_device *udev)
+{
+	int parent_vendor_id = le16_to_cpu(udev->parent->descriptor.idVendor);
+	int product_id = le16_to_cpu(udev->descriptor.idProduct);
+	int vendor_id = le16_to_cpu(udev->descriptor.idVendor);
+
+	if (vendor_id == VENDOR_ID_LENOVO) {
+		switch (product_id) {
+		case DEVICE_ID_LENOVO_USB_C_TRAVEL_HUB:
+		case DEVICE_ID_THINKPAD_ONELINK_PLUS_DOCK:
+		case DEVICE_ID_THINKPAD_THUNDERBOLT3_DOCK_GEN2:
+		case DEVICE_ID_THINKPAD_USB_C_DOCK_GEN2:
+		case DEVICE_ID_THINKPAD_USB_C_DOCK_GEN3:
+		case DEVICE_ID_THINKPAD_USB_C_DONGLE:
+			return 1;
+		}
+	} else if (vendor_id == VENDOR_ID_REALTEK && parent_vendor_id == VENDOR_ID_LENOVO) {
+		switch (product_id) {
+		case 0x8153:
+			return 1;
+		}
+	}
+	return 0;
+}
+
+static int rtl8152_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	u8 version = rtl8152_get_version(intf);
+	struct r8152 *tp;
+	struct net_device *netdev;
+	int ret;
+
+	if (version == RTL_VER_UNKNOWN)
+		return -ENODEV;
+
+	if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
+		return -ENODEV;
+
+	if (!rtl_check_vendor_ok(intf))
+		return -ENODEV;
+
+	usb_reset_device(udev);
+	netdev = alloc_etherdev(sizeof(struct r8152));
+	if (!netdev) {
+		dev_err(&intf->dev, "Out of memory\n");
+		return -ENOMEM;
+	}
+
+	SET_NETDEV_DEV(netdev, &intf->dev);
+	tp = netdev_priv(netdev);
+	tp->msg_enable = 0x7FFF;
+
+	tp->udev = udev;
+	tp->netdev = netdev;
+	tp->intf = intf;
+	tp->version = version;
+
+	tp->pipe_ctrl_in = usb_rcvctrlpipe(udev, 0);
+	tp->pipe_ctrl_out = usb_sndctrlpipe(udev, 0);
+	tp->pipe_in = usb_rcvbulkpipe(udev, 1);
+	tp->pipe_out = usb_sndbulkpipe(udev, 2);
+	tp->pipe_intr = usb_rcvintpipe(udev, 3);
+
+	switch (version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_07:
+		tp->mii.supports_gmii = 0;
+		break;
+	default:
+		tp->mii.supports_gmii = 1;
+		break;
+	}
+
+	ret = rtl_ops_init(tp);
+	if (ret)
+		goto out;
+
+	rtl_fw_init(tp);
+
+	mutex_init(&tp->control);
+	INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
+	INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);
+	tasklet_setup(&tp->tx_tl, bottom_half);
+	tasklet_disable(&tp->tx_tl);
+
+	netdev->netdev_ops = &rtl8152_netdev_ops;
+	netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
+
+	netdev->features |= NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
+			    NETIF_F_TSO | NETIF_F_FRAGLIST | NETIF_F_IPV6_CSUM |
+			    NETIF_F_TSO6 | NETIF_F_HW_VLAN_CTAG_RX |
+			    NETIF_F_HW_VLAN_CTAG_TX;
+	netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_SG |
+			      NETIF_F_TSO | NETIF_F_FRAGLIST |
+			      NETIF_F_IPV6_CSUM | NETIF_F_TSO6 |
+			      NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_CTAG_TX;
+	netdev->vlan_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO |
+				NETIF_F_HIGHDMA | NETIF_F_FRAGLIST |
+				NETIF_F_IPV6_CSUM | NETIF_F_TSO6;
+
+	if (tp->version == RTL_VER_01) {
+		netdev->features &= ~NETIF_F_RXCSUM;
+		netdev->hw_features &= ~NETIF_F_RXCSUM;
+	}
+
+	tp->lenovo_macpassthru = rtl8152_supports_lenovo_macpassthru(udev);
+
+	if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x3011 && udev->serial &&
+	    (!strcmp(udev->serial, "000001000000") ||
+	     !strcmp(udev->serial, "000002000000"))) {
+		dev_info(&udev->dev, "Dell TB16 Dock, disable RX aggregation");
+		tp->dell_tb_rx_agg_bug = 1;
+	}
+
+	netdev->ethtool_ops = &ops;
+	netif_set_tso_max_size(netdev, RTL_LIMITED_TSO_SIZE);
+
+	/* MTU range: 68 - 1500 or 9194 */
+	netdev->min_mtu = ETH_MIN_MTU;
+	switch (tp->version) {
+	case RTL_VER_03:
+	case RTL_VER_04:
+	case RTL_VER_05:
+	case RTL_VER_06:
+	case RTL_VER_08:
+	case RTL_VER_09:
+	case RTL_VER_14:
+		netdev->max_mtu = size_to_mtu(9 * 1024);
+		break;
+	case RTL_VER_10:
+	case RTL_VER_11:
+		netdev->max_mtu = size_to_mtu(15 * 1024);
+		break;
+	case RTL_VER_12:
+	case RTL_VER_13:
+	case RTL_VER_15:
+		netdev->max_mtu = size_to_mtu(16 * 1024);
+		break;
+	case RTL_VER_01:
+	case RTL_VER_02:
+	case RTL_VER_07:
+	default:
+		netdev->max_mtu = ETH_DATA_LEN;
+		break;
+	}
+
+	tp->mii.dev = netdev;
+	tp->mii.mdio_read = read_mii_word;
+	tp->mii.mdio_write = write_mii_word;
+	tp->mii.phy_id_mask = 0x3f;
+	tp->mii.reg_num_mask = 0x1f;
+	tp->mii.phy_id = R8152_PHY_ID;
+
+	tp->autoneg = AUTONEG_ENABLE;
+	tp->speed = SPEED_100;
+	tp->advertising = RTL_ADVERTISED_10_HALF | RTL_ADVERTISED_10_FULL |
+			  RTL_ADVERTISED_100_HALF | RTL_ADVERTISED_100_FULL;
+	if (tp->mii.supports_gmii) {
+		if (tp->support_2500full &&
+		    tp->udev->speed >= USB_SPEED_SUPER) {
+			tp->speed = SPEED_2500;
+			tp->advertising |= RTL_ADVERTISED_2500_FULL;
+		} else {
+			tp->speed = SPEED_1000;
+		}
+		tp->advertising |= RTL_ADVERTISED_1000_FULL;
+	}
+	tp->duplex = DUPLEX_FULL;
+
+	tp->rx_copybreak = RTL8152_RXFG_HEADSZ;
+	tp->rx_pending = 10 * RTL8152_MAX_RX;
+
+	intf->needs_remote_wakeup = 1;
+
+	if (!rtl_can_wakeup(tp))
+		__rtl_set_wol(tp, 0);
+	else
+		tp->saved_wolopts = __rtl_get_wol(tp);
+
+	tp->rtl_ops.init(tp);
+#if IS_BUILTIN(CONFIG_USB_RTL8152)
+	/* Retry in case request_firmware() is not ready yet. */
+	tp->rtl_fw.retry = true;
+#endif
+	queue_delayed_work(system_long_wq, &tp->hw_phy_work, 0);
+	set_ethernet_addr(tp, false);
+
+	usb_set_intfdata(intf, tp);
+
+	netif_napi_add_weight(netdev, &tp->napi, r8152_poll,
+			      tp->support_2500full ? 256 : 64);
+
+	ret = register_netdev(netdev);
+	if (ret != 0) {
+		dev_err(&intf->dev, "couldn't register the device\n");
+		goto out1;
+	}
+
+	if (tp->saved_wolopts)
+		device_set_wakeup_enable(&udev->dev, true);
+	else
+		device_set_wakeup_enable(&udev->dev, false);
+
+	netif_info(tp, probe, netdev, "%s\n", DRIVER_VERSION);
+
+	return 0;
+
+out1:
+	tasklet_kill(&tp->tx_tl);
+	cancel_delayed_work_sync(&tp->hw_phy_work);
+	if (tp->rtl_ops.unload)
+		tp->rtl_ops.unload(tp);
+	rtl8152_release_firmware(tp);
+	usb_set_intfdata(intf, NULL);
+out:
+	free_netdev(netdev);
+	return ret;
+}
+
+static void rtl8152_disconnect(struct usb_interface *intf)
+{
+	struct r8152 *tp = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (tp) {
+		rtl_set_unplug(tp);
+
+		unregister_netdev(tp->netdev);
+		tasklet_kill(&tp->tx_tl);
+		cancel_delayed_work_sync(&tp->hw_phy_work);
+		if (tp->rtl_ops.unload)
+			tp->rtl_ops.unload(tp);
+		rtl8152_release_firmware(tp);
+		free_netdev(tp->netdev);
+	}
+}
+
+/* table of devices that work with this driver */
+static const struct usb_device_id rtl8152_table[] = {
+	/* Realtek */
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x8050) },
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x8053) },
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x8152) },
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x8153) },
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x8155) },
+	{ USB_DEVICE(VENDOR_ID_REALTEK, 0x8156) },
+
+	/* Microsoft */
+	{ USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab) },
+	{ USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6) },
+	{ USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927) },
+	{ USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0c5e) },
+	{ USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0x304f) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0x3054) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0x3062) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0x3069) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0x3082) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0x7205) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0x720c) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0x7214) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0x721e) },
+	{ USB_DEVICE(VENDOR_ID_LENOVO,  0xa387) },
+	{ USB_DEVICE(VENDOR_ID_LINKSYS, 0x0041) },
+	{ USB_DEVICE(VENDOR_ID_NVIDIA,  0x09ff) },
+	{ USB_DEVICE(VENDOR_ID_TPLINK,  0x0601) },
+	{ USB_DEVICE(VENDOR_ID_DLINK,   0xb301) },
+	{ USB_DEVICE(VENDOR_ID_ASUS,    0x1976) },
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8152_table);
+
+static struct usb_driver rtl8152_driver = {
+	.name =		MODULENAME,
+	.id_table =	rtl8152_table,
+	.probe =	rtl8152_probe,
+	.disconnect =	rtl8152_disconnect,
+	.suspend =	rtl8152_suspend,
+	.resume =	rtl8152_resume,
+	.reset_resume =	rtl8152_reset_resume,
+	.pre_reset =	rtl8152_pre_reset,
+	.post_reset =	rtl8152_post_reset,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+static int rtl8152_cfgselector_probe(struct usb_device *udev)
+{
+	struct usb_host_config *c;
+	int i, num_configs;
+
+	/* Switch the device to vendor mode, if and only if the vendor mode
+	 * driver supports it.
+	 */
+	if (__rtl_get_hw_ver(udev) == RTL_VER_UNKNOWN)
+		return 0;
+
+	/* The vendor mode is not always config #1, so to find it out. */
+	c = udev->config;
+	num_configs = udev->descriptor.bNumConfigurations;
+	for (i = 0; i < num_configs; (i++, c++)) {
+		struct usb_interface_descriptor	*desc = NULL;
+
+		if (!c->desc.bNumInterfaces)
+			continue;
+		desc = &c->intf_cache[0]->altsetting->desc;
+		if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
+			break;
+	}
+
+	if (i == num_configs)
+		return -ENODEV;
+
+	if (usb_set_configuration(udev, c->desc.bConfigurationValue)) {
+		dev_err(&udev->dev, "Failed to set configuration %d\n",
+			c->desc.bConfigurationValue);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static struct usb_device_driver rtl8152_cfgselector_driver = {
+	.name =		MODULENAME "-cfgselector",
+	.probe =	rtl8152_cfgselector_probe,
+	.id_table =	rtl8152_table,
+	.generic_subclass = 1,
+	.supports_autosuspend = 1,
+};
+
+static int __init rtl8152_driver_init(void)
+{
+	int ret;
+
+	ret = usb_register_device_driver(&rtl8152_cfgselector_driver, THIS_MODULE);
+	if (ret)
+		return ret;
+	return usb_register(&rtl8152_driver);
+}
+
+static void __exit rtl8152_driver_exit(void)
+{
+	usb_deregister(&rtl8152_driver);
+	usb_deregister_device_driver(&rtl8152_cfgselector_driver);
+}
+
+module_init(rtl8152_driver_init);
+module_exit(rtl8152_driver_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
diff --git a/drivers/net/usb/r8153_ecm.c b/drivers/net/usb/r8153_ecm.c
new file mode 100644
index 000000000..20b2df8d7
--- /dev/null
+++ b/drivers/net/usb/r8153_ecm.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/r8152.h>
+
+#define OCP_BASE		0xe86c
+
+static int pla_read_word(struct usbnet *dev, u16 index)
+{
+	u16 byen = BYTE_EN_WORD;
+	u8 shift = index & 2;
+	__le32 tmp;
+	int ret;
+
+	if (shift)
+		byen <<= shift;
+
+	index &= ~3;
+
+	ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
+			      MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
+	if (ret < 0)
+		goto out;
+
+	ret = __le32_to_cpu(tmp);
+	ret >>= (shift * 8);
+	ret &= 0xffff;
+
+out:
+	return ret;
+}
+
+static int pla_write_word(struct usbnet *dev, u16 index, u32 data)
+{
+	u32 mask = 0xffff;
+	u16 byen = BYTE_EN_WORD;
+	u8 shift = index & 2;
+	__le32 tmp;
+	int ret;
+
+	data &= mask;
+
+	if (shift) {
+		byen <<= shift;
+		mask <<= (shift * 8);
+		data <<= (shift * 8);
+	}
+
+	index &= ~3;
+
+	ret = usbnet_read_cmd(dev, RTL8152_REQ_GET_REGS, RTL8152_REQT_READ, index,
+			      MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
+
+	if (ret < 0)
+		goto out;
+
+	data |= __le32_to_cpu(tmp) & ~mask;
+	tmp = __cpu_to_le32(data);
+
+	ret = usbnet_write_cmd(dev, RTL8152_REQ_SET_REGS, RTL8152_REQT_WRITE, index,
+			       MCU_TYPE_PLA | byen, &tmp, sizeof(tmp));
+
+out:
+	return ret;
+}
+
+static int r8153_ecm_mdio_read(struct net_device *netdev, int phy_id, int reg)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	int ret;
+
+	ret = pla_write_word(dev, OCP_BASE, 0xa000);
+	if (ret < 0)
+		goto out;
+
+	ret = pla_read_word(dev, 0xb400 + reg * 2);
+
+out:
+	return ret;
+}
+
+static void r8153_ecm_mdio_write(struct net_device *netdev, int phy_id, int reg, int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	int ret;
+
+	ret = pla_write_word(dev, OCP_BASE, 0xa000);
+	if (ret < 0)
+		return;
+
+	ret = pla_write_word(dev, 0xb400 + reg * 2, val);
+}
+
+static int r8153_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status;
+
+	status = usbnet_cdc_bind(dev, intf);
+	if (status < 0)
+		return status;
+
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = r8153_ecm_mdio_read;
+	dev->mii.mdio_write = r8153_ecm_mdio_write;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.supports_gmii = 1;
+
+	return status;
+}
+
+static const struct driver_info r8153_info = {
+	.description =	"RTL8153 ECM Device",
+	.flags =	FLAG_ETHER,
+	.bind =		r8153_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.status =	usbnet_cdc_status,
+	.manage_power =	usbnet_manage_power,
+};
+
+static const struct usb_device_id products[] = {
+/* Realtek RTL8153 Based USB 3.0 Ethernet Adapters */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_REALTEK, 0x8153, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&r8153_info,
+},
+
+/* Lenovo Powered USB-C Travel Hub (4X90S92381, based on Realtek RTL8153) */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(VENDOR_ID_LENOVO, 0x721e, USB_CLASS_COMM,
+				      USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long)&r8153_info,
+},
+
+	{ },		/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static int rtl8153_ecm_probe(struct usb_interface *intf,
+			     const struct usb_device_id *id)
+{
+#if IS_REACHABLE(CONFIG_USB_RTL8152)
+	if (rtl8152_get_version(intf))
+		return -ENODEV;
+#endif
+
+	return usbnet_probe(intf, id);
+}
+
+static struct usb_driver r8153_ecm_driver = {
+	.name =		"r8153_ecm",
+	.id_table =	products,
+	.probe =	rtl8153_ecm_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.reset_resume =	usbnet_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(r8153_ecm_driver);
+
+MODULE_AUTHOR("Hayes Wang");
+MODULE_DESCRIPTION("Realtek USB ECM device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
new file mode 100644
index 000000000..7b3739b29
--- /dev/null
+++ b/drivers/net/usb/rndis_host.c
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Host Side support for RNDIS Networking Links
+ * Copyright (C) 2005 by David Brownell
+ */
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/rndis_host.h>
+
+
+/*
+ * RNDIS is NDIS remoted over USB.  It's a MSFT variant of CDC ACM ... of
+ * course ACM was intended for modems, not Ethernet links!  USB's standard
+ * for Ethernet links is "CDC Ethernet", which is significantly simpler.
+ *
+ * NOTE that Microsoft's "RNDIS 1.0" specification is incomplete.  Issues
+ * include:
+ *    - Power management in particular relies on information that's scattered
+ *	through other documentation, and which is incomplete or incorrect even
+ *	there.
+ *    - There are various undocumented protocol requirements, such as the
+ *	need to send unused garbage in control-OUT messages.
+ *    - In some cases, MS-Windows will emit undocumented requests; this
+ *	matters more to peripheral implementations than host ones.
+ *
+ * Moreover there's a no-open-specs variant of RNDIS called "ActiveSync".
+ *
+ * For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in
+ * favor of such non-proprietary alternatives as CDC Ethernet or the newer (and
+ * currently rare) "Ethernet Emulation Model" (EEM).
+ */
+
+/*
+ * RNDIS notifications from device: command completion; "reverse"
+ * keepalives; etc
+ */
+void rndis_status(struct usbnet *dev, struct urb *urb)
+{
+	netdev_dbg(dev->net, "rndis status urb, len %d stat %d\n",
+		   urb->actual_length, urb->status);
+	// FIXME for keepalives, respond immediately (asynchronously)
+	// if not an RNDIS status, do like cdc_status(dev,urb) does
+}
+EXPORT_SYMBOL_GPL(rndis_status);
+
+/*
+ * RNDIS indicate messages.
+ */
+static void rndis_msg_indicate(struct usbnet *dev, struct rndis_indicate *msg,
+				int buflen)
+{
+	struct cdc_state *info = (void *)&dev->data;
+	struct device *udev = &info->control->dev;
+
+	if (dev->driver_info->indication) {
+		dev->driver_info->indication(dev, msg, buflen);
+	} else {
+		u32 status = le32_to_cpu(msg->status);
+
+		switch (status) {
+		case RNDIS_STATUS_MEDIA_CONNECT:
+			dev_info(udev, "rndis media connect\n");
+			break;
+		case RNDIS_STATUS_MEDIA_DISCONNECT:
+			dev_info(udev, "rndis media disconnect\n");
+			break;
+		default:
+			dev_info(udev, "rndis indication: 0x%08x\n", status);
+		}
+	}
+}
+
+/*
+ * RPC done RNDIS-style.  Caller guarantees:
+ * - message is properly byteswapped
+ * - there's no other request pending
+ * - buf can hold up to 1KB response (required by RNDIS spec)
+ * On return, the first few entries are already byteswapped.
+ *
+ * Call context is likely probe(), before interface name is known,
+ * which is why we won't try to use it in the diagnostics.
+ */
+int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
+{
+	struct cdc_state	*info = (void *) &dev->data;
+	struct usb_cdc_notification notification;
+	int			master_ifnum;
+	int			retval;
+	int			partial;
+	unsigned		count;
+	u32			xid = 0, msg_len, request_id, msg_type, rsp,
+				status;
+
+	/* REVISIT when this gets called from contexts other than probe() or
+	 * disconnect(): either serialize, or dispatch responses on xid
+	 */
+
+	msg_type = le32_to_cpu(buf->msg_type);
+
+	/* Issue the request; xid is unique, don't bother byteswapping it */
+	if (likely(msg_type != RNDIS_MSG_HALT && msg_type != RNDIS_MSG_RESET)) {
+		xid = dev->xid++;
+		if (!xid)
+			xid = dev->xid++;
+		buf->request_id = (__force __le32) xid;
+	}
+	master_ifnum = info->control->cur_altsetting->desc.bInterfaceNumber;
+	retval = usb_control_msg(dev->udev,
+		usb_sndctrlpipe(dev->udev, 0),
+		USB_CDC_SEND_ENCAPSULATED_COMMAND,
+		USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		0, master_ifnum,
+		buf, le32_to_cpu(buf->msg_len),
+		RNDIS_CONTROL_TIMEOUT_MS);
+	if (unlikely(retval < 0 || xid == 0))
+		return retval;
+
+	/* Some devices don't respond on the control channel until
+	 * polled on the status channel, so do that first. */
+	if (dev->driver_info->data & RNDIS_DRIVER_DATA_POLL_STATUS) {
+		retval = usb_interrupt_msg(
+			dev->udev,
+			usb_rcvintpipe(dev->udev,
+				       dev->status->desc.bEndpointAddress),
+			&notification, sizeof(notification), &partial,
+			RNDIS_CONTROL_TIMEOUT_MS);
+		if (unlikely(retval < 0))
+			return retval;
+	}
+
+	/* Poll the control channel; the request probably completed immediately */
+	rsp = le32_to_cpu(buf->msg_type) | RNDIS_MSG_COMPLETION;
+	for (count = 0; count < 10; count++) {
+		memset(buf, 0, CONTROL_BUFFER_SIZE);
+		retval = usb_control_msg(dev->udev,
+			usb_rcvctrlpipe(dev->udev, 0),
+			USB_CDC_GET_ENCAPSULATED_RESPONSE,
+			USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+			0, master_ifnum,
+			buf, buflen,
+			RNDIS_CONTROL_TIMEOUT_MS);
+		if (likely(retval >= 8)) {
+			msg_type = le32_to_cpu(buf->msg_type);
+			msg_len = le32_to_cpu(buf->msg_len);
+			status = le32_to_cpu(buf->status);
+			request_id = (__force u32) buf->request_id;
+			if (likely(msg_type == rsp)) {
+				if (likely(request_id == xid)) {
+					if (unlikely(rsp == RNDIS_MSG_RESET_C))
+						return 0;
+					if (likely(RNDIS_STATUS_SUCCESS ==
+							status))
+						return 0;
+					dev_dbg(&info->control->dev,
+						"rndis reply status %08x\n",
+						status);
+					return -EL3RST;
+				}
+				dev_dbg(&info->control->dev,
+					"rndis reply id %d expected %d\n",
+					request_id, xid);
+				/* then likely retry */
+			} else switch (msg_type) {
+			case RNDIS_MSG_INDICATE: /* fault/event */
+				rndis_msg_indicate(dev, (void *)buf, buflen);
+				break;
+			case RNDIS_MSG_KEEPALIVE: { /* ping */
+				struct rndis_keepalive_c *msg = (void *)buf;
+
+				msg->msg_type = cpu_to_le32(RNDIS_MSG_KEEPALIVE_C);
+				msg->msg_len = cpu_to_le32(sizeof *msg);
+				msg->status = cpu_to_le32(RNDIS_STATUS_SUCCESS);
+				retval = usb_control_msg(dev->udev,
+					usb_sndctrlpipe(dev->udev, 0),
+					USB_CDC_SEND_ENCAPSULATED_COMMAND,
+					USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+					0, master_ifnum,
+					msg, sizeof *msg,
+					RNDIS_CONTROL_TIMEOUT_MS);
+				if (unlikely(retval < 0))
+					dev_dbg(&info->control->dev,
+						"rndis keepalive err %d\n",
+						retval);
+				}
+				break;
+			default:
+				dev_dbg(&info->control->dev,
+					"unexpected rndis msg %08x len %d\n",
+					le32_to_cpu(buf->msg_type), msg_len);
+			}
+		} else {
+			/* device probably issued a protocol stall; ignore */
+			dev_dbg(&info->control->dev,
+				"rndis response error, code %d\n", retval);
+		}
+		msleep(40);
+	}
+	dev_dbg(&info->control->dev, "rndis response timeout\n");
+	return -ETIMEDOUT;
+}
+EXPORT_SYMBOL_GPL(rndis_command);
+
+/*
+ * rndis_query:
+ *
+ * Performs a query for @oid along with 0 or more bytes of payload as
+ * specified by @in_len. If @reply_len is not set to -1 then the reply
+ * length is checked against this value, resulting in an error if it
+ * doesn't match.
+ *
+ * NOTE: Adding a payload exactly or greater than the size of the expected
+ * response payload is an evident requirement MSFT added for ActiveSync.
+ *
+ * The only exception is for OIDs that return a variably sized response,
+ * in which case no payload should be added.  This undocumented (and
+ * nonsensical!) issue was found by sniffing protocol requests from the
+ * ActiveSync 4.1 Windows driver.
+ */
+static int rndis_query(struct usbnet *dev, struct usb_interface *intf,
+		void *buf, u32 oid, u32 in_len,
+		void **reply, int *reply_len)
+{
+	int retval;
+	union {
+		void			*buf;
+		struct rndis_msg_hdr	*header;
+		struct rndis_query	*get;
+		struct rndis_query_c	*get_c;
+	} u;
+	u32 off, len;
+
+	u.buf = buf;
+
+	memset(u.get, 0, sizeof *u.get + in_len);
+	u.get->msg_type = cpu_to_le32(RNDIS_MSG_QUERY);
+	u.get->msg_len = cpu_to_le32(sizeof *u.get + in_len);
+	u.get->oid = cpu_to_le32(oid);
+	u.get->len = cpu_to_le32(in_len);
+	u.get->offset = cpu_to_le32(20);
+
+	retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE);
+	if (unlikely(retval < 0)) {
+		dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n",
+				oid, retval);
+		return retval;
+	}
+
+	off = le32_to_cpu(u.get_c->offset);
+	len = le32_to_cpu(u.get_c->len);
+	if (unlikely((off > CONTROL_BUFFER_SIZE - 8) ||
+		     (len > CONTROL_BUFFER_SIZE - 8 - off)))
+		goto response_error;
+
+	if (*reply_len != -1 && len != *reply_len)
+		goto response_error;
+
+	*reply = (unsigned char *) &u.get_c->request_id + off;
+	*reply_len = len;
+
+	return retval;
+
+response_error:
+	dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) "
+			"invalid response - off %d len %d\n",
+		oid, off, len);
+	return -EDOM;
+}
+
+/* same as usbnet_netdev_ops but MTU change not allowed */
+static const struct net_device_ops rndis_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+int
+generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
+{
+	int			retval;
+	struct net_device	*net = dev->net;
+	struct cdc_state	*info = (void *) &dev->data;
+	union {
+		void			*buf;
+		struct rndis_msg_hdr	*header;
+		struct rndis_init	*init;
+		struct rndis_init_c	*init_c;
+		struct rndis_query	*get;
+		struct rndis_query_c	*get_c;
+		struct rndis_set	*set;
+		struct rndis_set_c	*set_c;
+		struct rndis_halt	*halt;
+	} u;
+	u32			tmp;
+	__le32			phym_unspec, *phym;
+	int			reply_len;
+	unsigned char		*bp;
+
+	/* we can't rely on i/o from stack working, or stack allocation */
+	u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL);
+	if (!u.buf)
+		return -ENOMEM;
+	retval = usbnet_generic_cdc_bind(dev, intf);
+	if (retval < 0)
+		goto fail;
+
+	u.init->msg_type = cpu_to_le32(RNDIS_MSG_INIT);
+	u.init->msg_len = cpu_to_le32(sizeof *u.init);
+	u.init->major_version = cpu_to_le32(1);
+	u.init->minor_version = cpu_to_le32(0);
+
+	/* max transfer (in spec) is 0x4000 at full speed, but for
+	 * TX we'll stick to one Ethernet packet plus RNDIS framing.
+	 * For RX we handle drivers that zero-pad to end-of-packet.
+	 * Don't let userspace change these settings.
+	 *
+	 * NOTE: there still seems to be weirdness here, as if we need
+	 * to do some more things to make sure WinCE targets accept this.
+	 * They default to jumbograms of 8KB or 16KB, which is absurd
+	 * for such low data rates and which is also more than Linux
+	 * can usually expect to allocate for SKB data...
+	 */
+	net->hard_header_len += sizeof (struct rndis_data_hdr);
+	dev->hard_mtu = net->mtu + net->hard_header_len;
+
+	dev->maxpacket = usb_maxpacket(dev->udev, dev->out);
+	if (dev->maxpacket == 0) {
+		netif_dbg(dev, probe, dev->net,
+			  "dev->maxpacket can't be 0\n");
+		retval = -EINVAL;
+		goto fail_and_release;
+	}
+
+	dev->rx_urb_size = dev->hard_mtu + (dev->maxpacket + 1);
+	dev->rx_urb_size &= ~(dev->maxpacket - 1);
+	u.init->max_transfer_size = cpu_to_le32(dev->rx_urb_size);
+
+	net->netdev_ops = &rndis_netdev_ops;
+
+	retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE);
+	if (unlikely(retval < 0)) {
+		/* it might not even be an RNDIS device!! */
+		dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
+		goto fail_and_release;
+	}
+	tmp = le32_to_cpu(u.init_c->max_transfer_size);
+	if (tmp < dev->hard_mtu) {
+		if (tmp <= net->hard_header_len) {
+			dev_err(&intf->dev,
+				"dev can't take %u byte packets (max %u)\n",
+				dev->hard_mtu, tmp);
+			retval = -EINVAL;
+			goto halt_fail_and_release;
+		}
+		dev_warn(&intf->dev,
+			 "dev can't take %u byte packets (max %u), "
+			 "adjusting MTU to %u\n",
+			 dev->hard_mtu, tmp, tmp - net->hard_header_len);
+		dev->hard_mtu = tmp;
+		net->mtu = dev->hard_mtu - net->hard_header_len;
+	}
+
+	/* REVISIT:  peripheral "alignment" request is ignored ... */
+	dev_dbg(&intf->dev,
+		"hard mtu %u (%u from dev), rx buflen %zu, align %d\n",
+		dev->hard_mtu, tmp, dev->rx_urb_size,
+		1 << le32_to_cpu(u.init_c->packet_alignment));
+
+	/* module has some device initialization code needs to be done right
+	 * after RNDIS_INIT */
+	if (dev->driver_info->early_init &&
+			dev->driver_info->early_init(dev) != 0)
+		goto halt_fail_and_release;
+
+	/* Check physical medium */
+	phym = NULL;
+	reply_len = sizeof *phym;
+	retval = rndis_query(dev, intf, u.buf,
+			     RNDIS_OID_GEN_PHYSICAL_MEDIUM,
+			     reply_len, (void **)&phym, &reply_len);
+	if (retval != 0 || !phym) {
+		/* OID is optional so don't fail here. */
+		phym_unspec = cpu_to_le32(RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED);
+		phym = &phym_unspec;
+	}
+	if ((flags & FLAG_RNDIS_PHYM_WIRELESS) &&
+	    le32_to_cpup(phym) != RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) {
+		netif_dbg(dev, probe, dev->net,
+			  "driver requires wireless physical medium, but device is not\n");
+		retval = -ENODEV;
+		goto halt_fail_and_release;
+	}
+	if ((flags & FLAG_RNDIS_PHYM_NOT_WIRELESS) &&
+	    le32_to_cpup(phym) == RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) {
+		netif_dbg(dev, probe, dev->net,
+			  "driver requires non-wireless physical medium, but device is wireless.\n");
+		retval = -ENODEV;
+		goto halt_fail_and_release;
+	}
+
+	/* Get designated host ethernet address */
+	reply_len = ETH_ALEN;
+	retval = rndis_query(dev, intf, u.buf,
+			     RNDIS_OID_802_3_PERMANENT_ADDRESS,
+			     48, (void **) &bp, &reply_len);
+	if (unlikely(retval< 0)) {
+		dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
+		goto halt_fail_and_release;
+	}
+
+	eth_hw_addr_set(net, bp);
+
+	/* set a nonzero filter to enable data transfers */
+	memset(u.set, 0, sizeof *u.set);
+	u.set->msg_type = cpu_to_le32(RNDIS_MSG_SET);
+	u.set->msg_len = cpu_to_le32(4 + sizeof *u.set);
+	u.set->oid = cpu_to_le32(RNDIS_OID_GEN_CURRENT_PACKET_FILTER);
+	u.set->len = cpu_to_le32(4);
+	u.set->offset = cpu_to_le32((sizeof *u.set) - 8);
+	*(__le32 *)(u.buf + sizeof *u.set) = cpu_to_le32(RNDIS_DEFAULT_FILTER);
+
+	retval = rndis_command(dev, u.header, CONTROL_BUFFER_SIZE);
+	if (unlikely(retval < 0)) {
+		dev_err(&intf->dev, "rndis set packet filter, %d\n", retval);
+		goto halt_fail_and_release;
+	}
+
+	retval = 0;
+
+	kfree(u.buf);
+	return retval;
+
+halt_fail_and_release:
+	memset(u.halt, 0, sizeof *u.halt);
+	u.halt->msg_type = cpu_to_le32(RNDIS_MSG_HALT);
+	u.halt->msg_len = cpu_to_le32(sizeof *u.halt);
+	(void) rndis_command(dev, (void *)u.halt, CONTROL_BUFFER_SIZE);
+fail_and_release:
+	usb_set_intfdata(info->data, NULL);
+	usb_driver_release_interface(driver_of(intf), info->data);
+	info->data = NULL;
+fail:
+	kfree(u.buf);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(generic_rndis_bind);
+
+static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	return generic_rndis_bind(dev, intf, FLAG_RNDIS_PHYM_NOT_WIRELESS);
+}
+
+static int zte_rndis_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status = rndis_bind(dev, intf);
+
+	if (!status && (dev->net->dev_addr[0] & 0x02))
+		eth_hw_addr_random(dev->net);
+
+	return status;
+}
+
+void rndis_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct rndis_halt	*halt;
+
+	/* try to clear any rndis state/activity (no i/o from stack!) */
+	halt = kzalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL);
+	if (halt) {
+		halt->msg_type = cpu_to_le32(RNDIS_MSG_HALT);
+		halt->msg_len = cpu_to_le32(sizeof *halt);
+		(void) rndis_command(dev, (void *)halt, CONTROL_BUFFER_SIZE);
+		kfree(halt);
+	}
+
+	usbnet_cdc_unbind(dev, intf);
+}
+EXPORT_SYMBOL_GPL(rndis_unbind);
+
+/*
+ * DATA -- host must not write zlps
+ */
+int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	bool dst_mac_fixup;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	dst_mac_fixup = !!(dev->driver_info->data & RNDIS_DRIVER_DATA_DST_MAC_FIXUP);
+
+	/* peripheral may have batched packets to us... */
+	while (likely(skb->len)) {
+		struct rndis_data_hdr	*hdr = (void *)skb->data;
+		struct sk_buff		*skb2;
+		u32			msg_type, msg_len, data_offset, data_len;
+
+		msg_type = le32_to_cpu(hdr->msg_type);
+		msg_len = le32_to_cpu(hdr->msg_len);
+		data_offset = le32_to_cpu(hdr->data_offset);
+		data_len = le32_to_cpu(hdr->data_len);
+
+		/* don't choke if we see oob, per-packet data, etc */
+		if (unlikely(msg_type != RNDIS_MSG_PACKET || skb->len < msg_len
+				|| (data_offset + data_len + 8) > msg_len)) {
+			dev->net->stats.rx_frame_errors++;
+			netdev_dbg(dev->net, "bad rndis message %d/%d/%d/%d, len %d\n",
+				   le32_to_cpu(hdr->msg_type),
+				   msg_len, data_offset, data_len, skb->len);
+			return 0;
+		}
+		skb_pull(skb, 8 + data_offset);
+
+		/* at most one packet left? */
+		if (likely((data_len - skb->len) <= sizeof *hdr)) {
+			skb_trim(skb, data_len);
+			break;
+		}
+
+		/* try to return all the packets in the batch */
+		skb2 = skb_clone(skb, GFP_ATOMIC);
+		if (unlikely(!skb2))
+			break;
+		skb_pull(skb, msg_len - sizeof *hdr);
+		skb_trim(skb2, data_len);
+
+		if (unlikely(dst_mac_fixup))
+			usbnet_cdc_zte_rx_fixup(dev, skb2);
+
+		usbnet_skb_return(dev, skb2);
+	}
+
+	/* caller will usbnet_skb_return the remaining packet */
+	if (unlikely(dst_mac_fixup))
+		usbnet_cdc_zte_rx_fixup(dev, skb);
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(rndis_rx_fixup);
+
+struct sk_buff *
+rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct rndis_data_hdr	*hdr;
+	struct sk_buff		*skb2;
+	unsigned		len = skb->len;
+
+	if (likely(!skb_cloned(skb))) {
+		int	room = skb_headroom(skb);
+
+		/* enough head room as-is? */
+		if (unlikely((sizeof *hdr) <= room))
+			goto fill;
+
+		/* enough room, but needs to be readjusted? */
+		room += skb_tailroom(skb);
+		if (likely((sizeof *hdr) <= room)) {
+			skb->data = memmove(skb->head + sizeof *hdr,
+					    skb->data, len);
+			skb_set_tail_pointer(skb, len);
+			goto fill;
+		}
+	}
+
+	/* create a new skb, with the correct size (and tailpad) */
+	skb2 = skb_copy_expand(skb, sizeof *hdr, 1, flags);
+	dev_kfree_skb_any(skb);
+	if (unlikely(!skb2))
+		return skb2;
+	skb = skb2;
+
+	/* fill out the RNDIS header.  we won't bother trying to batch
+	 * packets; Linux minimizes wasted bandwidth through tx queues.
+	 */
+fill:
+	hdr = __skb_push(skb, sizeof *hdr);
+	memset(hdr, 0, sizeof *hdr);
+	hdr->msg_type = cpu_to_le32(RNDIS_MSG_PACKET);
+	hdr->msg_len = cpu_to_le32(skb->len);
+	hdr->data_offset = cpu_to_le32(sizeof(*hdr) - 8);
+	hdr->data_len = cpu_to_le32(len);
+
+	/* FIXME make the last packet always be short ... */
+	return skb;
+}
+EXPORT_SYMBOL_GPL(rndis_tx_fixup);
+
+
+static const struct driver_info	rndis_info = {
+	.description =	"RNDIS device",
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+	.bind =		rndis_bind,
+	.unbind =	rndis_unbind,
+	.status =	rndis_status,
+	.rx_fixup =	rndis_rx_fixup,
+	.tx_fixup =	rndis_tx_fixup,
+};
+
+static const struct driver_info	rndis_poll_status_info = {
+	.description =	"RNDIS device (poll status before control)",
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+	.data =		RNDIS_DRIVER_DATA_POLL_STATUS,
+	.bind =		rndis_bind,
+	.unbind =	rndis_unbind,
+	.status =	rndis_status,
+	.rx_fixup =	rndis_rx_fixup,
+	.tx_fixup =	rndis_tx_fixup,
+};
+
+static const struct driver_info	zte_rndis_info = {
+	.description =	"ZTE RNDIS device",
+	.flags =	FLAG_ETHER | FLAG_POINTTOPOINT | FLAG_FRAMING_RN | FLAG_NO_SETINT,
+	.data =		RNDIS_DRIVER_DATA_DST_MAC_FIXUP,
+	.bind =		zte_rndis_bind,
+	.unbind =	rndis_unbind,
+	.status =	rndis_status,
+	.rx_fixup =	rndis_rx_fixup,
+	.tx_fixup =	rndis_tx_fixup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id	products [] = {
+{
+	/* 2Wire HomePortal 1000SW */
+	USB_DEVICE_AND_INTERFACE_INFO(0x1630, 0x0042,
+				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+	.driver_info = (unsigned long) &rndis_poll_status_info,
+}, {
+	/* Hytera Communications DMR radios' "Radio to PC Network" */
+	USB_VENDOR_AND_INTERFACE_INFO(0x238b,
+				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+	.driver_info = (unsigned long)&rndis_info,
+}, {
+	/* ZTE WWAN modules */
+	USB_VENDOR_AND_INTERFACE_INFO(0x19d2,
+				      USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
+	.driver_info = (unsigned long)&zte_rndis_info,
+}, {
+	/* ZTE WWAN modules, ACM flavour */
+	USB_VENDOR_AND_INTERFACE_INFO(0x19d2,
+				      USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+	.driver_info = (unsigned long)&zte_rndis_info,
+}, {
+	/* RNDIS is MSFT's un-official variant of CDC ACM */
+	USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
+	.driver_info = (unsigned long) &rndis_info,
+}, {
+	/* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
+	USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
+	.driver_info = (unsigned long) &rndis_poll_status_info,
+}, {
+	/* RNDIS for tethering */
+	USB_INTERFACE_INFO(USB_CLASS_WIRELESS_CONTROLLER, 1, 3),
+	.driver_info = (unsigned long) &rndis_info,
+}, {
+	/* Novatel Verizon USB730L */
+	USB_INTERFACE_INFO(USB_CLASS_MISC, 4, 1),
+	.driver_info = (unsigned long) &rndis_info,
+},
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver rndis_driver = {
+	.name =		"rndis_host",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(rndis_driver);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB Host side RNDIS driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
new file mode 100644
index 000000000..97afd7335
--- /dev/null
+++ b/drivers/net/usb/rtl8150.c
@@ -0,0 +1,957 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (c) 2002 Petko Manolov (petkan@users.sourceforge.net)
+ */
+
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/usb.h>
+#include <linux/uaccess.h>
+
+/* Version Information */
+#define DRIVER_VERSION "v0.6.2 (2004/08/27)"
+#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
+#define DRIVER_DESC "rtl8150 based usb-ethernet driver"
+
+#define	IDR			0x0120
+#define	MAR			0x0126
+#define	CR			0x012e
+#define	TCR			0x012f
+#define	RCR			0x0130
+#define	TSR			0x0132
+#define	RSR			0x0133
+#define	CON0			0x0135
+#define	CON1			0x0136
+#define	MSR			0x0137
+#define	PHYADD			0x0138
+#define	PHYDAT			0x0139
+#define	PHYCNT			0x013b
+#define	GPPC			0x013d
+#define	BMCR			0x0140
+#define	BMSR			0x0142
+#define	ANAR			0x0144
+#define	ANLP			0x0146
+#define	AER			0x0148
+#define CSCR			0x014C  /* This one has the link status */
+#define CSCR_LINK_STATUS	(1 << 3)
+
+#define	IDR_EEPROM		0x1202
+
+#define	PHY_READ		0
+#define	PHY_WRITE		0x20
+#define	PHY_GO			0x40
+
+#define	MII_TIMEOUT		10
+#define	INTBUFSIZE		8
+
+#define	RTL8150_REQT_READ	0xc0
+#define	RTL8150_REQT_WRITE	0x40
+#define	RTL8150_REQ_GET_REGS	0x05
+#define	RTL8150_REQ_SET_REGS	0x05
+
+
+/* Transmit status register errors */
+#define TSR_ECOL		(1<<5)
+#define TSR_LCOL		(1<<4)
+#define TSR_LOSS_CRS		(1<<3)
+#define TSR_JBR			(1<<2)
+#define TSR_ERRORS		(TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
+/* Receive status register errors */
+#define RSR_CRC			(1<<2)
+#define RSR_FAE			(1<<1)
+#define RSR_ERRORS		(RSR_CRC | RSR_FAE)
+
+/* Media status register definitions */
+#define MSR_DUPLEX		(1<<4)
+#define MSR_SPEED		(1<<3)
+#define MSR_LINK		(1<<2)
+
+/* Interrupt pipe data */
+#define INT_TSR			0x00
+#define INT_RSR			0x01
+#define INT_MSR			0x02
+#define INT_WAKSR		0x03
+#define INT_TXOK_CNT		0x04
+#define INT_RXLOST_CNT		0x05
+#define INT_CRERR_CNT		0x06
+#define INT_COL_CNT		0x07
+
+
+#define	RTL8150_MTU		1540
+#define	RTL8150_TX_TIMEOUT	(HZ)
+#define	RX_SKB_POOL_SIZE	4
+
+/* rtl8150 flags */
+#define	RTL8150_HW_CRC		0
+#define	RX_REG_SET		1
+#define	RTL8150_UNPLUG		2
+#define	RX_URB_FAIL		3
+
+/* Define these values to match your device */
+#define	VENDOR_ID_REALTEK		0x0bda
+#define	VENDOR_ID_MELCO			0x0411
+#define	VENDOR_ID_MICRONET		0x3980
+#define	VENDOR_ID_LONGSHINE		0x07b8
+#define	VENDOR_ID_OQO			0x1557
+#define	VENDOR_ID_ZYXEL			0x0586
+
+#define PRODUCT_ID_RTL8150		0x8150
+#define	PRODUCT_ID_LUAKTX		0x0012
+#define	PRODUCT_ID_LCS8138TX		0x401a
+#define PRODUCT_ID_SP128AR		0x0003
+#define	PRODUCT_ID_PRESTIGE		0x401a
+
+#undef	EEPROM_WRITE
+
+/* table of devices that work with this driver */
+static const struct usb_device_id rtl8150_table[] = {
+	{USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)},
+	{USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
+	{USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
+	{USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
+	{USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
+	{USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, rtl8150_table);
+
+struct rtl8150 {
+	unsigned long flags;
+	struct usb_device *udev;
+	struct tasklet_struct tl;
+	struct net_device *netdev;
+	struct urb *rx_urb, *tx_urb, *intr_urb;
+	struct sk_buff *tx_skb, *rx_skb;
+	struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
+	spinlock_t rx_pool_lock;
+	struct usb_ctrlrequest dr;
+	int intr_interval;
+	u8 *intr_buff;
+	u8 phy;
+};
+
+typedef struct rtl8150 rtl8150_t;
+
+struct async_req {
+	struct usb_ctrlrequest dr;
+	u16 rx_creg;
+};
+
+static const char driver_name [] = "rtl8150";
+
+/*
+**
+**	device related part of the code
+**
+*/
+static int get_registers(rtl8150_t * dev, u16 indx, u16 size, void *data)
+{
+	return usb_control_msg_recv(dev->udev, 0, RTL8150_REQ_GET_REGS,
+				    RTL8150_REQT_READ, indx, 0, data, size,
+				    1000, GFP_NOIO);
+}
+
+static int set_registers(rtl8150_t * dev, u16 indx, u16 size, const void *data)
+{
+	return usb_control_msg_send(dev->udev, 0, RTL8150_REQ_SET_REGS,
+				    RTL8150_REQT_WRITE, indx, 0, data, size,
+				    1000, GFP_NOIO);
+}
+
+static void async_set_reg_cb(struct urb *urb)
+{
+	struct async_req *req = (struct async_req *)urb->context;
+	int status = urb->status;
+
+	if (status < 0)
+		dev_dbg(&urb->dev->dev, "%s failed with %d", __func__, status);
+	kfree(req);
+	usb_free_urb(urb);
+}
+
+static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg)
+{
+	int res = -ENOMEM;
+	struct urb *async_urb;
+	struct async_req *req;
+
+	req = kmalloc(sizeof(struct async_req), GFP_ATOMIC);
+	if (req == NULL)
+		return res;
+	async_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (async_urb == NULL) {
+		kfree(req);
+		return res;
+	}
+	req->rx_creg = cpu_to_le16(reg);
+	req->dr.bRequestType = RTL8150_REQT_WRITE;
+	req->dr.bRequest = RTL8150_REQ_SET_REGS;
+	req->dr.wIndex = 0;
+	req->dr.wValue = cpu_to_le16(indx);
+	req->dr.wLength = cpu_to_le16(size);
+	usb_fill_control_urb(async_urb, dev->udev,
+	                     usb_sndctrlpipe(dev->udev, 0), (void *)&req->dr,
+			     &req->rx_creg, size, async_set_reg_cb, req);
+	res = usb_submit_urb(async_urb, GFP_ATOMIC);
+	if (res) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res);
+	}
+	return res;
+}
+
+static int read_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 * reg)
+{
+	int i;
+	u8 data[3], tmp;
+
+	data[0] = phy;
+	data[1] = data[2] = 0;
+	tmp = indx | PHY_READ | PHY_GO;
+	i = 0;
+
+	set_registers(dev, PHYADD, sizeof(data), data);
+	set_registers(dev, PHYCNT, 1, &tmp);
+	do {
+		get_registers(dev, PHYCNT, 1, data);
+	} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
+
+	if (i <= MII_TIMEOUT) {
+		get_registers(dev, PHYDAT, 2, data);
+		*reg = data[0] | (data[1] << 8);
+		return 0;
+	} else
+		return 1;
+}
+
+static int write_mii_word(rtl8150_t * dev, u8 phy, __u8 indx, u16 reg)
+{
+	int i;
+	u8 data[3], tmp;
+
+	data[0] = phy;
+	data[1] = reg & 0xff;
+	data[2] = (reg >> 8) & 0xff;
+	tmp = indx | PHY_WRITE | PHY_GO;
+	i = 0;
+
+	set_registers(dev, PHYADD, sizeof(data), data);
+	set_registers(dev, PHYCNT, 1, &tmp);
+	do {
+		get_registers(dev, PHYCNT, 1, data);
+	} while ((data[0] & PHY_GO) && (i++ < MII_TIMEOUT));
+
+	if (i <= MII_TIMEOUT)
+		return 0;
+	else
+		return 1;
+}
+
+static void set_ethernet_addr(rtl8150_t *dev)
+{
+	u8 node_id[ETH_ALEN];
+	int ret;
+
+	ret = get_registers(dev, IDR, sizeof(node_id), node_id);
+
+	if (!ret) {
+		eth_hw_addr_set(dev->netdev, node_id);
+	} else {
+		eth_hw_addr_random(dev->netdev);
+		netdev_notice(dev->netdev, "Assigned a random MAC address: %pM\n",
+			      dev->netdev->dev_addr);
+	}
+}
+
+static int rtl8150_set_mac_address(struct net_device *netdev, void *p)
+{
+	struct sockaddr *addr = p;
+	rtl8150_t *dev = netdev_priv(netdev);
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	eth_hw_addr_set(netdev, addr->sa_data);
+	netdev_dbg(netdev, "Setting MAC address to %pM\n", netdev->dev_addr);
+	/* Set the IDR registers. */
+	set_registers(dev, IDR, netdev->addr_len, netdev->dev_addr);
+#ifdef EEPROM_WRITE
+	{
+	int i;
+	u8 cr;
+	/* Get the CR contents. */
+	get_registers(dev, CR, 1, &cr);
+	/* Set the WEPROM bit (eeprom write enable). */
+	cr |= 0x20;
+	set_registers(dev, CR, 1, &cr);
+	/* Write the MAC address into eeprom. Eeprom writes must be word-sized,
+	   so we need to split them up. */
+	for (i = 0; i * 2 < netdev->addr_len; i++) {
+		set_registers(dev, IDR_EEPROM + (i * 2), 2,
+		netdev->dev_addr + (i * 2));
+	}
+	/* Clear the WEPROM bit (preventing accidental eeprom writes). */
+	cr &= 0xdf;
+	set_registers(dev, CR, 1, &cr);
+	}
+#endif
+	return 0;
+}
+
+static int rtl8150_reset(rtl8150_t * dev)
+{
+	u8 data = 0x10;
+	int i = HZ;
+
+	set_registers(dev, CR, 1, &data);
+	do {
+		get_registers(dev, CR, 1, &data);
+	} while ((data & 0x10) && --i);
+
+	return (i > 0) ? 1 : 0;
+}
+
+static int alloc_all_urbs(rtl8150_t * dev)
+{
+	dev->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->rx_urb)
+		return 0;
+	dev->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->tx_urb) {
+		usb_free_urb(dev->rx_urb);
+		return 0;
+	}
+	dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->intr_urb) {
+		usb_free_urb(dev->rx_urb);
+		usb_free_urb(dev->tx_urb);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void free_all_urbs(rtl8150_t * dev)
+{
+	usb_free_urb(dev->rx_urb);
+	usb_free_urb(dev->tx_urb);
+	usb_free_urb(dev->intr_urb);
+}
+
+static void unlink_all_urbs(rtl8150_t * dev)
+{
+	usb_kill_urb(dev->rx_urb);
+	usb_kill_urb(dev->tx_urb);
+	usb_kill_urb(dev->intr_urb);
+}
+
+static inline struct sk_buff *pull_skb(rtl8150_t *dev)
+{
+	struct sk_buff *skb;
+	int i;
+
+	for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
+		if (dev->rx_skb_pool[i]) {
+			skb = dev->rx_skb_pool[i];
+			dev->rx_skb_pool[i] = NULL;
+			return skb;
+		}
+	}
+	return NULL;
+}
+
+static void read_bulk_callback(struct urb *urb)
+{
+	rtl8150_t *dev;
+	unsigned pkt_len, res;
+	struct sk_buff *skb;
+	struct net_device *netdev;
+	int status = urb->status;
+	int result;
+	unsigned long flags;
+
+	dev = urb->context;
+	if (!dev)
+		return;
+	if (test_bit(RTL8150_UNPLUG, &dev->flags))
+		return;
+	netdev = dev->netdev;
+	if (!netif_device_present(netdev))
+		return;
+
+	switch (status) {
+	case 0:
+		break;
+	case -ENOENT:
+		return;	/* the urb is in unlink state */
+	case -ETIME:
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "may be reset is needed?..\n");
+		goto goon;
+	default:
+		if (printk_ratelimit())
+			dev_warn(&urb->dev->dev, "Rx status %d\n", status);
+		goto goon;
+	}
+
+	if (!dev->rx_skb)
+		goto resched;
+	/* protect against short packets (tell me why we got some?!?) */
+	if (urb->actual_length < 4)
+		goto goon;
+
+	res = urb->actual_length;
+	pkt_len = res - 4;
+
+	skb_put(dev->rx_skb, pkt_len);
+	dev->rx_skb->protocol = eth_type_trans(dev->rx_skb, netdev);
+	netif_rx(dev->rx_skb);
+	netdev->stats.rx_packets++;
+	netdev->stats.rx_bytes += pkt_len;
+
+	spin_lock_irqsave(&dev->rx_pool_lock, flags);
+	skb = pull_skb(dev);
+	spin_unlock_irqrestore(&dev->rx_pool_lock, flags);
+	if (!skb)
+		goto resched;
+
+	dev->rx_skb = skb;
+goon:
+	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
+	result = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+	if (result == -ENODEV)
+		netif_device_detach(dev->netdev);
+	else if (result) {
+		set_bit(RX_URB_FAIL, &dev->flags);
+		goto resched;
+	} else {
+		clear_bit(RX_URB_FAIL, &dev->flags);
+	}
+
+	return;
+resched:
+	tasklet_schedule(&dev->tl);
+}
+
+static void write_bulk_callback(struct urb *urb)
+{
+	rtl8150_t *dev;
+	int status = urb->status;
+
+	dev = urb->context;
+	if (!dev)
+		return;
+	dev_kfree_skb_irq(dev->tx_skb);
+	if (!netif_device_present(dev->netdev))
+		return;
+	if (status)
+		dev_info(&urb->dev->dev, "%s: Tx status %d\n",
+			 dev->netdev->name, status);
+	netif_trans_update(dev->netdev);
+	netif_wake_queue(dev->netdev);
+}
+
+static void intr_callback(struct urb *urb)
+{
+	rtl8150_t *dev;
+	__u8 *d;
+	int status = urb->status;
+	int res;
+
+	dev = urb->context;
+	if (!dev)
+		return;
+	switch (status) {
+	case 0:			/* success */
+		break;
+	case -ECONNRESET:	/* unlink */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		return;
+	/* -EPIPE:  should clear the halt */
+	default:
+		dev_info(&urb->dev->dev, "%s: intr status %d\n",
+			 dev->netdev->name, status);
+		goto resubmit;
+	}
+
+	d = urb->transfer_buffer;
+	if (d[0] & TSR_ERRORS) {
+		dev->netdev->stats.tx_errors++;
+		if (d[INT_TSR] & (TSR_ECOL | TSR_JBR))
+			dev->netdev->stats.tx_aborted_errors++;
+		if (d[INT_TSR] & TSR_LCOL)
+			dev->netdev->stats.tx_window_errors++;
+		if (d[INT_TSR] & TSR_LOSS_CRS)
+			dev->netdev->stats.tx_carrier_errors++;
+	}
+	/* Report link status changes to the network stack */
+	if ((d[INT_MSR] & MSR_LINK) == 0) {
+		if (netif_carrier_ok(dev->netdev)) {
+			netif_carrier_off(dev->netdev);
+			netdev_dbg(dev->netdev, "%s: LINK LOST\n", __func__);
+		}
+	} else {
+		if (!netif_carrier_ok(dev->netdev)) {
+			netif_carrier_on(dev->netdev);
+			netdev_dbg(dev->netdev, "%s: LINK CAME BACK\n", __func__);
+		}
+	}
+
+resubmit:
+	res = usb_submit_urb (urb, GFP_ATOMIC);
+	if (res == -ENODEV)
+		netif_device_detach(dev->netdev);
+	else if (res)
+		dev_err(&dev->udev->dev,
+			"can't resubmit intr, %s-%s/input0, status %d\n",
+			dev->udev->bus->bus_name, dev->udev->devpath, res);
+}
+
+static int rtl8150_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	netif_device_detach(dev->netdev);
+
+	if (netif_running(dev->netdev)) {
+		usb_kill_urb(dev->rx_urb);
+		usb_kill_urb(dev->intr_urb);
+	}
+	return 0;
+}
+
+static int rtl8150_resume(struct usb_interface *intf)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	netif_device_attach(dev->netdev);
+	if (netif_running(dev->netdev)) {
+		dev->rx_urb->status = 0;
+		dev->rx_urb->actual_length = 0;
+		read_bulk_callback(dev->rx_urb);
+
+		dev->intr_urb->status = 0;
+		dev->intr_urb->actual_length = 0;
+		intr_callback(dev->intr_urb);
+	}
+	return 0;
+}
+
+/*
+**
+**	network related part of the code
+**
+*/
+
+static void fill_skb_pool(rtl8150_t *dev)
+{
+	struct sk_buff *skb;
+	int i;
+
+	for (i = 0; i < RX_SKB_POOL_SIZE; i++) {
+		if (dev->rx_skb_pool[i])
+			continue;
+		skb = dev_alloc_skb(RTL8150_MTU + 2);
+		if (!skb) {
+			return;
+		}
+		skb_reserve(skb, 2);
+		dev->rx_skb_pool[i] = skb;
+	}
+}
+
+static void free_skb_pool(rtl8150_t *dev)
+{
+	int i;
+
+	for (i = 0; i < RX_SKB_POOL_SIZE; i++)
+		dev_kfree_skb(dev->rx_skb_pool[i]);
+}
+
+static void rx_fixup(struct tasklet_struct *t)
+{
+	struct rtl8150 *dev = from_tasklet(dev, t, tl);
+	struct sk_buff *skb;
+	int status;
+
+	spin_lock_irq(&dev->rx_pool_lock);
+	fill_skb_pool(dev);
+	spin_unlock_irq(&dev->rx_pool_lock);
+	if (test_bit(RX_URB_FAIL, &dev->flags))
+		if (dev->rx_skb)
+			goto try_again;
+	spin_lock_irq(&dev->rx_pool_lock);
+	skb = pull_skb(dev);
+	spin_unlock_irq(&dev->rx_pool_lock);
+	if (skb == NULL)
+		goto tlsched;
+	dev->rx_skb = skb;
+	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
+try_again:
+	status = usb_submit_urb(dev->rx_urb, GFP_ATOMIC);
+	if (status == -ENODEV) {
+		netif_device_detach(dev->netdev);
+	} else if (status) {
+		set_bit(RX_URB_FAIL, &dev->flags);
+		goto tlsched;
+	} else {
+		clear_bit(RX_URB_FAIL, &dev->flags);
+	}
+
+	return;
+tlsched:
+	tasklet_schedule(&dev->tl);
+}
+
+static int enable_net_traffic(rtl8150_t * dev)
+{
+	u8 cr, tcr, rcr, msr;
+
+	if (!rtl8150_reset(dev)) {
+		dev_warn(&dev->udev->dev, "device reset failed\n");
+	}
+	/* RCR bit7=1 attach Rx info at the end;  =0 HW CRC (which is broken) */
+	rcr = 0x9e;
+	tcr = 0xd8;
+	cr = 0x0c;
+	if (!(rcr & 0x80))
+		set_bit(RTL8150_HW_CRC, &dev->flags);
+	set_registers(dev, RCR, 1, &rcr);
+	set_registers(dev, TCR, 1, &tcr);
+	set_registers(dev, CR, 1, &cr);
+	get_registers(dev, MSR, 1, &msr);
+
+	return 0;
+}
+
+static void disable_net_traffic(rtl8150_t * dev)
+{
+	u8 cr;
+
+	get_registers(dev, CR, 1, &cr);
+	cr &= 0xf3;
+	set_registers(dev, CR, 1, &cr);
+}
+
+static void rtl8150_tx_timeout(struct net_device *netdev, unsigned int txqueue)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	dev_warn(&netdev->dev, "Tx timeout.\n");
+	usb_unlink_urb(dev->tx_urb);
+	netdev->stats.tx_errors++;
+}
+
+static void rtl8150_set_multicast(struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	u16 rx_creg = 0x9e;
+
+	netif_stop_queue(netdev);
+	if (netdev->flags & IFF_PROMISC) {
+		rx_creg |= 0x0001;
+		dev_info(&netdev->dev, "%s: promiscuous mode\n", netdev->name);
+	} else if (!netdev_mc_empty(netdev) ||
+		   (netdev->flags & IFF_ALLMULTI)) {
+		rx_creg &= 0xfffe;
+		rx_creg |= 0x0002;
+		dev_dbg(&netdev->dev, "%s: allmulti set\n", netdev->name);
+	} else {
+		/* ~RX_MULTICAST, ~RX_PROMISCUOUS */
+		rx_creg &= 0x00fc;
+	}
+	async_set_registers(dev, RCR, sizeof(rx_creg), rx_creg);
+	netif_wake_queue(netdev);
+}
+
+static netdev_tx_t rtl8150_start_xmit(struct sk_buff *skb,
+					    struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	int count, res;
+
+	netif_stop_queue(netdev);
+	count = (skb->len < 60) ? 60 : skb->len;
+	count = (count & 0x3f) ? count : count + 1;
+	dev->tx_skb = skb;
+	usb_fill_bulk_urb(dev->tx_urb, dev->udev, usb_sndbulkpipe(dev->udev, 2),
+		      skb->data, count, write_bulk_callback, dev);
+	if ((res = usb_submit_urb(dev->tx_urb, GFP_ATOMIC))) {
+		/* Can we get/handle EPIPE here? */
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		else {
+			dev_warn(&netdev->dev, "failed tx_urb %d\n", res);
+			netdev->stats.tx_errors++;
+			netif_start_queue(netdev);
+		}
+	} else {
+		netdev->stats.tx_packets++;
+		netdev->stats.tx_bytes += skb->len;
+		netif_trans_update(netdev);
+	}
+
+	return NETDEV_TX_OK;
+}
+
+
+static void set_carrier(struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	short tmp;
+
+	get_registers(dev, CSCR, 2, &tmp);
+	if (tmp & CSCR_LINK_STATUS)
+		netif_carrier_on(netdev);
+	else
+		netif_carrier_off(netdev);
+}
+
+static int rtl8150_open(struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	int res;
+
+	if (dev->rx_skb == NULL)
+		dev->rx_skb = pull_skb(dev);
+	if (!dev->rx_skb)
+		return -ENOMEM;
+
+	set_registers(dev, IDR, 6, netdev->dev_addr);
+
+	usb_fill_bulk_urb(dev->rx_urb, dev->udev, usb_rcvbulkpipe(dev->udev, 1),
+		      dev->rx_skb->data, RTL8150_MTU, read_bulk_callback, dev);
+	if ((res = usb_submit_urb(dev->rx_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		dev_warn(&netdev->dev, "rx_urb submit failed: %d\n", res);
+		return res;
+	}
+	usb_fill_int_urb(dev->intr_urb, dev->udev, usb_rcvintpipe(dev->udev, 3),
+		     dev->intr_buff, INTBUFSIZE, intr_callback,
+		     dev, dev->intr_interval);
+	if ((res = usb_submit_urb(dev->intr_urb, GFP_KERNEL))) {
+		if (res == -ENODEV)
+			netif_device_detach(dev->netdev);
+		dev_warn(&netdev->dev, "intr_urb submit failed: %d\n", res);
+		usb_kill_urb(dev->rx_urb);
+		return res;
+	}
+	enable_net_traffic(dev);
+	set_carrier(netdev);
+	netif_start_queue(netdev);
+
+	return res;
+}
+
+static int rtl8150_close(struct net_device *netdev)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+
+	netif_stop_queue(netdev);
+	if (!test_bit(RTL8150_UNPLUG, &dev->flags))
+		disable_net_traffic(dev);
+	unlink_all_urbs(dev);
+
+	return 0;
+}
+
+static void rtl8150_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+
+	strscpy(info->driver, driver_name, sizeof(info->driver));
+	strscpy(info->version, DRIVER_VERSION, sizeof(info->version));
+	usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
+}
+
+static int rtl8150_get_link_ksettings(struct net_device *netdev,
+				      struct ethtool_link_ksettings *ecmd)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	short lpa, bmcr;
+	u32 supported;
+
+	supported = (SUPPORTED_10baseT_Half |
+			  SUPPORTED_10baseT_Full |
+			  SUPPORTED_100baseT_Half |
+			  SUPPORTED_100baseT_Full |
+			  SUPPORTED_Autoneg |
+			  SUPPORTED_TP | SUPPORTED_MII);
+	ecmd->base.port = PORT_TP;
+	ecmd->base.phy_address = dev->phy;
+	get_registers(dev, BMCR, 2, &bmcr);
+	get_registers(dev, ANLP, 2, &lpa);
+	if (bmcr & BMCR_ANENABLE) {
+		u32 speed = ((lpa & (LPA_100HALF | LPA_100FULL)) ?
+			     SPEED_100 : SPEED_10);
+		ecmd->base.speed = speed;
+		ecmd->base.autoneg = AUTONEG_ENABLE;
+		if (speed == SPEED_100)
+			ecmd->base.duplex = (lpa & LPA_100FULL) ?
+			    DUPLEX_FULL : DUPLEX_HALF;
+		else
+			ecmd->base.duplex = (lpa & LPA_10FULL) ?
+			    DUPLEX_FULL : DUPLEX_HALF;
+	} else {
+		ecmd->base.autoneg = AUTONEG_DISABLE;
+		ecmd->base.speed = ((bmcr & BMCR_SPEED100) ?
+					     SPEED_100 : SPEED_10);
+		ecmd->base.duplex = (bmcr & BMCR_FULLDPLX) ?
+		    DUPLEX_FULL : DUPLEX_HALF;
+	}
+
+	ethtool_convert_legacy_u32_to_link_mode(ecmd->link_modes.supported,
+						supported);
+
+	return 0;
+}
+
+static const struct ethtool_ops ops = {
+	.get_drvinfo = rtl8150_get_drvinfo,
+	.get_link = ethtool_op_get_link,
+	.get_link_ksettings = rtl8150_get_link_ksettings,
+};
+
+static int rtl8150_siocdevprivate(struct net_device *netdev, struct ifreq *rq,
+				  void __user *udata, int cmd)
+{
+	rtl8150_t *dev = netdev_priv(netdev);
+	u16 *data = (u16 *) & rq->ifr_ifru;
+	int res = 0;
+
+	switch (cmd) {
+	case SIOCDEVPRIVATE:
+		data[0] = dev->phy;
+		fallthrough;
+	case SIOCDEVPRIVATE + 1:
+		read_mii_word(dev, dev->phy, (data[1] & 0x1f), &data[3]);
+		break;
+	case SIOCDEVPRIVATE + 2:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		write_mii_word(dev, dev->phy, (data[1] & 0x1f), data[2]);
+		break;
+	default:
+		res = -EOPNOTSUPP;
+	}
+
+	return res;
+}
+
+static const struct net_device_ops rtl8150_netdev_ops = {
+	.ndo_open		= rtl8150_open,
+	.ndo_stop		= rtl8150_close,
+	.ndo_siocdevprivate	= rtl8150_siocdevprivate,
+	.ndo_start_xmit		= rtl8150_start_xmit,
+	.ndo_tx_timeout		= rtl8150_tx_timeout,
+	.ndo_set_rx_mode	= rtl8150_set_multicast,
+	.ndo_set_mac_address	= rtl8150_set_mac_address,
+
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+static int rtl8150_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	rtl8150_t *dev;
+	struct net_device *netdev;
+
+	netdev = alloc_etherdev(sizeof(rtl8150_t));
+	if (!netdev)
+		return -ENOMEM;
+
+	dev = netdev_priv(netdev);
+
+	dev->intr_buff = kmalloc(INTBUFSIZE, GFP_KERNEL);
+	if (!dev->intr_buff) {
+		free_netdev(netdev);
+		return -ENOMEM;
+	}
+
+	tasklet_setup(&dev->tl, rx_fixup);
+	spin_lock_init(&dev->rx_pool_lock);
+
+	dev->udev = udev;
+	dev->netdev = netdev;
+	netdev->netdev_ops = &rtl8150_netdev_ops;
+	netdev->watchdog_timeo = RTL8150_TX_TIMEOUT;
+	netdev->ethtool_ops = &ops;
+	dev->intr_interval = 100;	/* 100ms */
+
+	if (!alloc_all_urbs(dev)) {
+		dev_err(&intf->dev, "out of memory\n");
+		goto out;
+	}
+	if (!rtl8150_reset(dev)) {
+		dev_err(&intf->dev, "couldn't reset the device\n");
+		goto out1;
+	}
+	fill_skb_pool(dev);
+	set_ethernet_addr(dev);
+
+	usb_set_intfdata(intf, dev);
+	SET_NETDEV_DEV(netdev, &intf->dev);
+	if (register_netdev(netdev) != 0) {
+		dev_err(&intf->dev, "couldn't register the device\n");
+		goto out2;
+	}
+
+	dev_info(&intf->dev, "%s: rtl8150 is detected\n", netdev->name);
+
+	return 0;
+
+out2:
+	usb_set_intfdata(intf, NULL);
+	free_skb_pool(dev);
+out1:
+	free_all_urbs(dev);
+out:
+	kfree(dev->intr_buff);
+	free_netdev(netdev);
+	return -EIO;
+}
+
+static void rtl8150_disconnect(struct usb_interface *intf)
+{
+	rtl8150_t *dev = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (dev) {
+		set_bit(RTL8150_UNPLUG, &dev->flags);
+		tasklet_kill(&dev->tl);
+		unregister_netdev(dev->netdev);
+		unlink_all_urbs(dev);
+		free_all_urbs(dev);
+		free_skb_pool(dev);
+		dev_kfree_skb(dev->rx_skb);
+		kfree(dev->intr_buff);
+		free_netdev(dev->netdev);
+	}
+}
+
+static struct usb_driver rtl8150_driver = {
+	.name		= driver_name,
+	.probe		= rtl8150_probe,
+	.disconnect	= rtl8150_disconnect,
+	.id_table	= rtl8150_table,
+	.suspend	= rtl8150_suspend,
+	.resume		= rtl8150_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(rtl8150_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
new file mode 100644
index 000000000..b3ae949e6
--- /dev/null
+++ b/drivers/net/usb/sierra_net.c
@@ -0,0 +1,973 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * USB-to-WWAN Driver for Sierra Wireless modems
+ *
+ * Copyright (C) 2008, 2009, 2010 Paxton Smith, Matthew Safar, Rory Filer
+ *                          <linux@sierrawireless.com>
+ *
+ * Portions of this based on the cdc_ether driver by David Brownell (2003-2005)
+ * and Ole Andre Vadla Ravnas (ActiveSync) (2006).
+ *
+ * IMPORTANT DISCLAIMER: This driver is not commercially supported by
+ * Sierra Wireless. Use at your own risk.
+ */
+
+#define DRIVER_VERSION "v.2.0"
+#define DRIVER_AUTHOR "Paxton Smith, Matthew Safar, Rory Filer"
+#define DRIVER_DESC "USB-to-WWAN Driver for Sierra Wireless modems"
+static const char driver_name[] = "sierra_net";
+
+/* if defined debug messages enabled */
+/*#define	DEBUG*/
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <net/ip.h>
+#include <net/udp.h>
+#include <asm/unaligned.h>
+#include <linux/usb/usbnet.h>
+
+#define SWI_USB_REQUEST_GET_FW_ATTR	0x06
+#define SWI_GET_FW_ATTR_MASK		0x08
+
+/* atomic counter partially included in MAC address to make sure 2 devices
+ * do not end up with the same MAC - concept breaks in case of > 255 ifaces
+ */
+static	atomic_t iface_counter = ATOMIC_INIT(0);
+
+/*
+ * SYNC Timer Delay definition used to set the expiry time
+ */
+#define SIERRA_NET_SYNCDELAY (2*HZ)
+
+/* Max. MTU supported. The modem buffers are limited to 1500 */
+#define SIERRA_NET_MAX_SUPPORTED_MTU	1500
+
+/* The SIERRA_NET_USBCTL_BUF_LEN defines a buffer size allocated for control
+ * message reception ... and thus the max. received packet.
+ * (May be the cause for parse_hip returning -EINVAL)
+ */
+#define SIERRA_NET_USBCTL_BUF_LEN	1024
+
+/* Overriding the default usbnet rx_urb_size */
+#define SIERRA_NET_RX_URB_SIZE		(8 * 1024)
+
+/* Private data structure */
+struct sierra_net_data {
+
+	u16 link_up;		/* air link up or down */
+	u8 tx_hdr_template[4];	/* part of HIP hdr for tx'd packets */
+
+	u8 sync_msg[4];		/* SYNC message */
+	u8 shdwn_msg[4];	/* Shutdown message */
+
+	/* Backpointer to the container */
+	struct usbnet *usbnet;
+
+	u8 ifnum;	/* interface number */
+
+/* Bit masks, must be a power of 2 */
+#define SIERRA_NET_EVENT_RESP_AVAIL    0x01
+#define SIERRA_NET_TIMER_EXPIRY        0x02
+	unsigned long kevent_flags;
+	struct work_struct sierra_net_kevent;
+	struct timer_list sync_timer; /* For retrying SYNC sequence */
+};
+
+struct param {
+	int is_present;
+	union {
+		void  *ptr;
+		u32    dword;
+		u16    word;
+		u8     byte;
+	};
+};
+
+/* HIP message type */
+#define SIERRA_NET_HIP_EXTENDEDID	0x7F
+#define SIERRA_NET_HIP_HSYNC_ID		0x60	/* Modem -> host */
+#define SIERRA_NET_HIP_RESTART_ID	0x62	/* Modem -> host */
+#define SIERRA_NET_HIP_MSYNC_ID		0x20	/* Host -> modem */
+#define SIERRA_NET_HIP_SHUTD_ID		0x26	/* Host -> modem */
+
+#define SIERRA_NET_HIP_EXT_IP_IN_ID   0x0202
+#define SIERRA_NET_HIP_EXT_IP_OUT_ID  0x0002
+
+/* 3G UMTS Link Sense Indication definitions */
+#define SIERRA_NET_HIP_LSI_UMTSID	0x78
+
+/* Reverse Channel Grant Indication HIP message */
+#define SIERRA_NET_HIP_RCGI		0x64
+
+/* LSI Protocol types */
+#define SIERRA_NET_PROTOCOL_UMTS      0x01
+#define SIERRA_NET_PROTOCOL_UMTS_DS   0x04
+/* LSI Coverage */
+#define SIERRA_NET_COVERAGE_NONE      0x00
+#define SIERRA_NET_COVERAGE_NOPACKET  0x01
+
+/* LSI Session */
+#define SIERRA_NET_SESSION_IDLE       0x00
+/* LSI Link types */
+#define SIERRA_NET_AS_LINK_TYPE_IPV4  0x00
+#define SIERRA_NET_AS_LINK_TYPE_IPV6  0x02
+
+struct lsi_umts {
+	u8 protocol;
+	u8 unused1;
+	__be16 length;
+	/* eventually use a union for the rest - assume umts for now */
+	u8 coverage;
+	u8 network_len; /* network name len */
+	u8 network[40]; /* network name (UCS2, bigendian) */
+	u8 session_state;
+	u8 unused3[33];
+} __packed;
+
+struct lsi_umts_single {
+	struct lsi_umts lsi;
+	u8 link_type;
+	u8 pdp_addr_len; /* NW-supplied PDP address len */
+	u8 pdp_addr[16]; /* NW-supplied PDP address (bigendian)) */
+	u8 unused4[23];
+	u8 dns1_addr_len; /* NW-supplied 1st DNS address len (bigendian) */
+	u8 dns1_addr[16]; /* NW-supplied 1st DNS address */
+	u8 dns2_addr_len; /* NW-supplied 2nd DNS address len */
+	u8 dns2_addr[16]; /* NW-supplied 2nd DNS address (bigendian)*/
+	u8 wins1_addr_len; /* NW-supplied 1st Wins address len */
+	u8 wins1_addr[16]; /* NW-supplied 1st Wins address (bigendian)*/
+	u8 wins2_addr_len; /* NW-supplied 2nd Wins address len */
+	u8 wins2_addr[16]; /* NW-supplied 2nd Wins address (bigendian) */
+	u8 unused5[4];
+	u8 gw_addr_len; /* NW-supplied GW address len */
+	u8 gw_addr[16]; /* NW-supplied GW address (bigendian) */
+	u8 reserved[8];
+} __packed;
+
+struct lsi_umts_dual {
+	struct lsi_umts lsi;
+	u8 pdp_addr4_len; /* NW-supplied PDP IPv4 address len */
+	u8 pdp_addr4[4];  /* NW-supplied PDP IPv4 address (bigendian)) */
+	u8 pdp_addr6_len; /* NW-supplied PDP IPv6 address len */
+	u8 pdp_addr6[16]; /* NW-supplied PDP IPv6 address (bigendian)) */
+	u8 unused4[23];
+	u8 dns1_addr4_len; /* NW-supplied 1st DNS v4 address len (bigendian) */
+	u8 dns1_addr4[4];  /* NW-supplied 1st DNS v4 address */
+	u8 dns1_addr6_len; /* NW-supplied 1st DNS v6 address len */
+	u8 dns1_addr6[16]; /* NW-supplied 1st DNS v6 address (bigendian)*/
+	u8 dns2_addr4_len; /* NW-supplied 2nd DNS v4 address len (bigendian) */
+	u8 dns2_addr4[4];  /* NW-supplied 2nd DNS v4 address */
+	u8 dns2_addr6_len; /* NW-supplied 2nd DNS v6 address len */
+	u8 dns2_addr6[16]; /* NW-supplied 2nd DNS v6 address (bigendian)*/
+	u8 unused5[68];
+} __packed;
+
+#define SIERRA_NET_LSI_COMMON_LEN      4
+#define SIERRA_NET_LSI_UMTS_LEN        (sizeof(struct lsi_umts_single))
+#define SIERRA_NET_LSI_UMTS_STATUS_LEN \
+	(SIERRA_NET_LSI_UMTS_LEN - SIERRA_NET_LSI_COMMON_LEN)
+#define SIERRA_NET_LSI_UMTS_DS_LEN     (sizeof(struct lsi_umts_dual))
+#define SIERRA_NET_LSI_UMTS_DS_STATUS_LEN \
+	(SIERRA_NET_LSI_UMTS_DS_LEN - SIERRA_NET_LSI_COMMON_LEN)
+
+/* Our own net device operations structure */
+static const struct net_device_ops sierra_net_device_ops = {
+	.ndo_open               = usbnet_open,
+	.ndo_stop               = usbnet_stop,
+	.ndo_start_xmit         = usbnet_start_xmit,
+	.ndo_tx_timeout         = usbnet_tx_timeout,
+	.ndo_change_mtu         = usbnet_change_mtu,
+	.ndo_get_stats64        = dev_get_tstats64,
+	.ndo_set_mac_address    = eth_mac_addr,
+	.ndo_validate_addr      = eth_validate_addr,
+};
+
+/* get private data associated with passed in usbnet device */
+static inline struct sierra_net_data *sierra_net_get_private(struct usbnet *dev)
+{
+	return (struct sierra_net_data *)dev->data[0];
+}
+
+/* set private data associated with passed in usbnet device */
+static inline void sierra_net_set_private(struct usbnet *dev,
+			struct sierra_net_data *priv)
+{
+	dev->data[0] = (unsigned long)priv;
+}
+
+/* is packet IPv4/IPv6 */
+static inline int is_ip(struct sk_buff *skb)
+{
+	return skb->protocol == cpu_to_be16(ETH_P_IP) ||
+	       skb->protocol == cpu_to_be16(ETH_P_IPV6);
+}
+
+/*
+ * check passed in packet and make sure that:
+ *  - it is linear (no scatter/gather)
+ *  - it is ethernet (mac_header properly set)
+ */
+static int check_ethip_packet(struct sk_buff *skb, struct usbnet *dev)
+{
+	skb_reset_mac_header(skb); /* ethernet header */
+
+	if (skb_is_nonlinear(skb)) {
+		netdev_err(dev->net, "Non linear buffer-dropping\n");
+		return 0;
+	}
+
+	if (!pskb_may_pull(skb, ETH_HLEN))
+		return 0;
+	skb->protocol = eth_hdr(skb)->h_proto;
+
+	return 1;
+}
+
+static const u8 *save16bit(struct param *p, const u8 *datap)
+{
+	p->is_present = 1;
+	p->word = get_unaligned_be16(datap);
+	return datap + sizeof(p->word);
+}
+
+static const u8 *save8bit(struct param *p, const u8 *datap)
+{
+	p->is_present = 1;
+	p->byte = *datap;
+	return datap + sizeof(p->byte);
+}
+
+/*----------------------------------------------------------------------------*
+ *                              BEGIN HIP                                     *
+ *----------------------------------------------------------------------------*/
+/* HIP header */
+#define SIERRA_NET_HIP_HDR_LEN 4
+/* Extended HIP header */
+#define SIERRA_NET_HIP_EXT_HDR_LEN 6
+
+struct hip_hdr {
+	int    hdrlen;
+	struct param payload_len;
+	struct param msgid;
+	struct param msgspecific;
+	struct param extmsgid;
+};
+
+static int parse_hip(const u8 *buf, const u32 buflen, struct hip_hdr *hh)
+{
+	const u8 *curp = buf;
+	int    padded;
+
+	if (buflen < SIERRA_NET_HIP_HDR_LEN)
+		return -EPROTO;
+
+	curp = save16bit(&hh->payload_len, curp);
+	curp = save8bit(&hh->msgid, curp);
+	curp = save8bit(&hh->msgspecific, curp);
+
+	padded = hh->msgid.byte & 0x80;
+	hh->msgid.byte &= 0x7F;			/* 7 bits */
+
+	hh->extmsgid.is_present = (hh->msgid.byte == SIERRA_NET_HIP_EXTENDEDID);
+	if (hh->extmsgid.is_present) {
+		if (buflen < SIERRA_NET_HIP_EXT_HDR_LEN)
+			return -EPROTO;
+
+		hh->payload_len.word &= 0x3FFF; /* 14 bits */
+
+		curp = save16bit(&hh->extmsgid, curp);
+		hh->extmsgid.word &= 0x03FF;	/* 10 bits */
+
+		hh->hdrlen = SIERRA_NET_HIP_EXT_HDR_LEN;
+	} else {
+		hh->payload_len.word &= 0x07FF;	/* 11 bits */
+		hh->hdrlen = SIERRA_NET_HIP_HDR_LEN;
+	}
+
+	if (padded) {
+		hh->hdrlen++;
+		hh->payload_len.word--;
+	}
+
+	/* if real packet shorter than the claimed length */
+	if (buflen < (hh->hdrlen + hh->payload_len.word))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void build_hip(u8 *buf, const u16 payloadlen,
+		struct sierra_net_data *priv)
+{
+	/* the following doesn't have the full functionality. We
+	 * currently build only one kind of header, so it is faster this way
+	 */
+	put_unaligned_be16(payloadlen, buf);
+	memcpy(buf+2, priv->tx_hdr_template, sizeof(priv->tx_hdr_template));
+}
+/*----------------------------------------------------------------------------*
+ *                              END HIP                                       *
+ *----------------------------------------------------------------------------*/
+
+static int sierra_net_send_cmd(struct usbnet *dev,
+		u8 *cmd, int cmdlen, const char * cmd_name)
+{
+	struct sierra_net_data *priv = sierra_net_get_private(dev);
+	int  status;
+
+	status = usbnet_write_cmd(dev, USB_CDC_SEND_ENCAPSULATED_COMMAND,
+				  USB_DIR_OUT|USB_TYPE_CLASS|USB_RECIP_INTERFACE,
+				  0, priv->ifnum, cmd, cmdlen);
+
+	if (status != cmdlen && status != -ENODEV)
+		netdev_err(dev->net, "Submit %s failed %d\n", cmd_name, status);
+
+	return status;
+}
+
+static int sierra_net_send_sync(struct usbnet *dev)
+{
+	int  status;
+	struct sierra_net_data *priv = sierra_net_get_private(dev);
+
+	dev_dbg(&dev->udev->dev, "%s", __func__);
+
+	status = sierra_net_send_cmd(dev, priv->sync_msg,
+			sizeof(priv->sync_msg), "SYNC");
+
+	return status;
+}
+
+static void sierra_net_set_ctx_index(struct sierra_net_data *priv, u8 ctx_ix)
+{
+	dev_dbg(&(priv->usbnet->udev->dev), "%s %d", __func__, ctx_ix);
+	priv->tx_hdr_template[0] = 0x3F;
+	priv->tx_hdr_template[1] = ctx_ix;
+	*((__be16 *)&priv->tx_hdr_template[2]) =
+		cpu_to_be16(SIERRA_NET_HIP_EXT_IP_OUT_ID);
+}
+
+static int sierra_net_parse_lsi(struct usbnet *dev, char *data, int datalen)
+{
+	struct lsi_umts *lsi = (struct lsi_umts *)data;
+	u32 expected_length;
+
+	if (datalen < sizeof(struct lsi_umts_single)) {
+		netdev_err(dev->net, "%s: Data length %d, exp >= %zu\n",
+			   __func__, datalen, sizeof(struct lsi_umts_single));
+		return -1;
+	}
+
+	/* Validate the session state */
+	if (lsi->session_state == SIERRA_NET_SESSION_IDLE) {
+		netdev_err(dev->net, "Session idle, 0x%02x\n",
+			   lsi->session_state);
+		return 0;
+	}
+
+	/* Validate the protocol  - only support UMTS for now */
+	if (lsi->protocol == SIERRA_NET_PROTOCOL_UMTS) {
+		struct lsi_umts_single *single = (struct lsi_umts_single *)lsi;
+
+		/* Validate the link type */
+		if (single->link_type != SIERRA_NET_AS_LINK_TYPE_IPV4 &&
+		    single->link_type != SIERRA_NET_AS_LINK_TYPE_IPV6) {
+			netdev_err(dev->net, "Link type unsupported: 0x%02x\n",
+				   single->link_type);
+			return -1;
+		}
+		expected_length = SIERRA_NET_LSI_UMTS_STATUS_LEN;
+	} else if (lsi->protocol == SIERRA_NET_PROTOCOL_UMTS_DS) {
+		expected_length = SIERRA_NET_LSI_UMTS_DS_STATUS_LEN;
+	} else {
+		netdev_err(dev->net, "Protocol unsupported, 0x%02x\n",
+			   lsi->protocol);
+		return -1;
+	}
+
+	if (be16_to_cpu(lsi->length) != expected_length) {
+		netdev_err(dev->net, "%s: LSI_UMTS_STATUS_LEN %d, exp %u\n",
+			   __func__, be16_to_cpu(lsi->length), expected_length);
+		return -1;
+	}
+
+	/* Validate the coverage */
+	if (lsi->coverage == SIERRA_NET_COVERAGE_NONE ||
+	    lsi->coverage == SIERRA_NET_COVERAGE_NOPACKET) {
+		netdev_err(dev->net, "No coverage, 0x%02x\n", lsi->coverage);
+		return 0;
+	}
+
+	/* Set link_sense true */
+	return 1;
+}
+
+static void sierra_net_handle_lsi(struct usbnet *dev, char *data,
+		struct hip_hdr	*hh)
+{
+	struct sierra_net_data *priv = sierra_net_get_private(dev);
+	int link_up;
+
+	link_up = sierra_net_parse_lsi(dev, data + hh->hdrlen,
+					hh->payload_len.word);
+	if (link_up < 0) {
+		netdev_err(dev->net, "Invalid LSI\n");
+		return;
+	}
+	if (link_up) {
+		sierra_net_set_ctx_index(priv, hh->msgspecific.byte);
+		priv->link_up = 1;
+	} else {
+		priv->link_up = 0;
+	}
+	usbnet_link_change(dev, link_up, 0);
+}
+
+static void sierra_net_dosync(struct usbnet *dev)
+{
+	int status;
+	struct sierra_net_data *priv = sierra_net_get_private(dev);
+
+	dev_dbg(&dev->udev->dev, "%s", __func__);
+
+	/* The SIERRA_NET_HIP_MSYNC_ID command appears to request that the
+	 * firmware restart itself.  After restarting, the modem will respond
+	 * with the SIERRA_NET_HIP_RESTART_ID indication.  The driver continues
+	 * sending MSYNC commands every few seconds until it receives the
+	 * RESTART event from the firmware
+	 */
+
+	/* tell modem we are ready */
+	status = sierra_net_send_sync(dev);
+	if (status < 0)
+		netdev_err(dev->net,
+			"Send SYNC failed, status %d\n", status);
+	status = sierra_net_send_sync(dev);
+	if (status < 0)
+		netdev_err(dev->net,
+			"Send SYNC failed, status %d\n", status);
+
+	/* Now, start a timer and make sure we get the Restart Indication */
+	priv->sync_timer.expires = jiffies + SIERRA_NET_SYNCDELAY;
+	add_timer(&priv->sync_timer);
+}
+
+static void sierra_net_kevent(struct work_struct *work)
+{
+	struct sierra_net_data *priv =
+		container_of(work, struct sierra_net_data, sierra_net_kevent);
+	struct usbnet *dev = priv->usbnet;
+	int  len;
+	int  err;
+	u8  *buf;
+	u8   ifnum;
+
+	if (test_bit(SIERRA_NET_EVENT_RESP_AVAIL, &priv->kevent_flags)) {
+		clear_bit(SIERRA_NET_EVENT_RESP_AVAIL, &priv->kevent_flags);
+
+		/* Query the modem for the LSI message */
+		buf = kzalloc(SIERRA_NET_USBCTL_BUF_LEN, GFP_KERNEL);
+		if (!buf)
+			return;
+
+		ifnum = priv->ifnum;
+		len = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+				USB_CDC_GET_ENCAPSULATED_RESPONSE,
+				USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE,
+				0, ifnum, buf, SIERRA_NET_USBCTL_BUF_LEN,
+				USB_CTRL_SET_TIMEOUT);
+
+		if (len < 0) {
+			netdev_err(dev->net,
+				"usb_control_msg failed, status %d\n", len);
+		} else {
+			struct hip_hdr	hh;
+
+			dev_dbg(&dev->udev->dev, "%s: Received status message,"
+				" %04x bytes", __func__, len);
+
+			err = parse_hip(buf, len, &hh);
+			if (err) {
+				netdev_err(dev->net, "%s: Bad packet,"
+					" parse result %d\n", __func__, err);
+				kfree(buf);
+				return;
+			}
+
+			/* Validate packet length */
+			if (len != hh.hdrlen + hh.payload_len.word) {
+				netdev_err(dev->net, "%s: Bad packet, received"
+					" %d, expected %d\n",	__func__, len,
+					hh.hdrlen + hh.payload_len.word);
+				kfree(buf);
+				return;
+			}
+
+			/* Switch on received message types */
+			switch (hh.msgid.byte) {
+			case SIERRA_NET_HIP_LSI_UMTSID:
+				dev_dbg(&dev->udev->dev, "LSI for ctx:%d",
+					hh.msgspecific.byte);
+				sierra_net_handle_lsi(dev, buf, &hh);
+				break;
+			case SIERRA_NET_HIP_RESTART_ID:
+				dev_dbg(&dev->udev->dev, "Restart reported: %d,"
+						" stopping sync timer",
+						hh.msgspecific.byte);
+				/* Got sync resp - stop timer & clear mask */
+				del_timer_sync(&priv->sync_timer);
+				clear_bit(SIERRA_NET_TIMER_EXPIRY,
+					  &priv->kevent_flags);
+				break;
+			case SIERRA_NET_HIP_HSYNC_ID:
+				dev_dbg(&dev->udev->dev, "SYNC received");
+				err = sierra_net_send_sync(dev);
+				if (err < 0)
+					netdev_err(dev->net,
+						"Send SYNC failed %d\n", err);
+				break;
+			case SIERRA_NET_HIP_EXTENDEDID:
+				netdev_err(dev->net, "Unrecognized HIP msg, "
+					"extmsgid 0x%04x\n", hh.extmsgid.word);
+				break;
+			case SIERRA_NET_HIP_RCGI:
+				/* Ignored */
+				break;
+			default:
+				netdev_err(dev->net, "Unrecognized HIP msg, "
+					"msgid 0x%02x\n", hh.msgid.byte);
+				break;
+			}
+		}
+		kfree(buf);
+	}
+	/* The sync timer bit might be set */
+	if (test_bit(SIERRA_NET_TIMER_EXPIRY, &priv->kevent_flags)) {
+		clear_bit(SIERRA_NET_TIMER_EXPIRY, &priv->kevent_flags);
+		dev_dbg(&dev->udev->dev, "Deferred sync timer expiry");
+		sierra_net_dosync(priv->usbnet);
+	}
+
+	if (priv->kevent_flags)
+		dev_dbg(&dev->udev->dev, "sierra_net_kevent done, "
+			"kevent_flags = 0x%lx", priv->kevent_flags);
+}
+
+static void sierra_net_defer_kevent(struct usbnet *dev, int work)
+{
+	struct sierra_net_data *priv = sierra_net_get_private(dev);
+
+	set_bit(work, &priv->kevent_flags);
+	schedule_work(&priv->sierra_net_kevent);
+}
+
+/*
+ * Sync Retransmit Timer Handler. On expiry, kick the work queue
+ */
+static void sierra_sync_timer(struct timer_list *t)
+{
+	struct sierra_net_data *priv = from_timer(priv, t, sync_timer);
+	struct usbnet *dev = priv->usbnet;
+
+	dev_dbg(&dev->udev->dev, "%s", __func__);
+	/* Kick the tasklet */
+	sierra_net_defer_kevent(dev, SIERRA_NET_TIMER_EXPIRY);
+}
+
+static void sierra_net_status(struct usbnet *dev, struct urb *urb)
+{
+	struct usb_cdc_notification *event;
+
+	dev_dbg(&dev->udev->dev, "%s", __func__);
+
+	if (urb->actual_length < sizeof *event)
+		return;
+
+	/* Add cases to handle other standard notifications. */
+	event = urb->transfer_buffer;
+	switch (event->bNotificationType) {
+	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+	case USB_CDC_NOTIFY_SPEED_CHANGE:
+		/* USB 305 sends those */
+		break;
+	case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
+		sierra_net_defer_kevent(dev, SIERRA_NET_EVENT_RESP_AVAIL);
+		break;
+	default:
+		netdev_err(dev->net, ": unexpected notification %02x!\n",
+				event->bNotificationType);
+		break;
+	}
+}
+
+static void sierra_net_get_drvinfo(struct net_device *net,
+		struct ethtool_drvinfo *info)
+{
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	strscpy(info->driver, driver_name, sizeof(info->driver));
+	strscpy(info->version, DRIVER_VERSION, sizeof(info->version));
+}
+
+static u32 sierra_net_get_link(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	/* Report link is down whenever the interface is down */
+	return sierra_net_get_private(dev)->link_up && netif_running(net);
+}
+
+static const struct ethtool_ops sierra_net_ethtool_ops = {
+	.get_drvinfo = sierra_net_get_drvinfo,
+	.get_link = sierra_net_get_link,
+	.get_msglevel = usbnet_get_msglevel,
+	.set_msglevel = usbnet_set_msglevel,
+	.nway_reset = usbnet_nway_reset,
+	.get_link_ksettings = usbnet_get_link_ksettings_mii,
+	.set_link_ksettings = usbnet_set_link_ksettings_mii,
+};
+
+static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap)
+{
+	int result = 0;
+	__le16 attrdata;
+
+	result = usbnet_read_cmd(dev,
+				/* _u8 vendor specific request */
+				SWI_USB_REQUEST_GET_FW_ATTR,
+				USB_DIR_IN | USB_TYPE_VENDOR,	/* __u8 request type */
+				0x0000,		/* __u16 value not used */
+				0x0000,		/* __u16 index  not used */
+				&attrdata,	/* char *data */
+				sizeof(attrdata)	/* __u16 size */
+				);
+
+	if (result < 0)
+		return -EIO;
+
+	*datap = le16_to_cpu(attrdata);
+	return result;
+}
+
+/*
+ * collects the bulk endpoints, the status endpoint.
+ */
+static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	u8	ifacenum;
+	u8	numendpoints;
+	u16	fwattr = 0;
+	int	status;
+	struct sierra_net_data *priv;
+	static const u8 sync_tmplate[sizeof(priv->sync_msg)] = {
+		0x00, 0x00, SIERRA_NET_HIP_MSYNC_ID, 0x00};
+	static const u8 shdwn_tmplate[sizeof(priv->shdwn_msg)] = {
+		0x00, 0x00, SIERRA_NET_HIP_SHUTD_ID, 0x00};
+	u8 mod[2];
+
+	dev_dbg(&dev->udev->dev, "%s", __func__);
+
+	ifacenum = intf->cur_altsetting->desc.bInterfaceNumber;
+	numendpoints = intf->cur_altsetting->desc.bNumEndpoints;
+	/* We have three endpoints, bulk in and out, and a status */
+	if (numendpoints != 3) {
+		dev_err(&dev->udev->dev, "Expected 3 endpoints, found: %d",
+			numendpoints);
+		return -ENODEV;
+	}
+	/* Status endpoint set in usbnet_get_endpoints() */
+	dev->status = NULL;
+	status = usbnet_get_endpoints(dev, intf);
+	if (status < 0) {
+		dev_err(&dev->udev->dev, "Error in usbnet_get_endpoints (%d)",
+			status);
+		return -ENODEV;
+	}
+	/* Initialize sierra private data */
+	priv = kzalloc(sizeof *priv, GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->usbnet = dev;
+	priv->ifnum = ifacenum;
+	dev->net->netdev_ops = &sierra_net_device_ops;
+
+	/* change MAC addr to include, ifacenum, and to be unique */
+	mod[0] = atomic_inc_return(&iface_counter);
+	mod[1] = ifacenum;
+	dev_addr_mod(dev->net, ETH_ALEN - 2, mod, 2);
+
+	/* prepare shutdown message template */
+	memcpy(priv->shdwn_msg, shdwn_tmplate, sizeof(priv->shdwn_msg));
+	/* set context index initially to 0 - prepares tx hdr template */
+	sierra_net_set_ctx_index(priv, 0);
+
+	/* prepare sync message template */
+	memcpy(priv->sync_msg, sync_tmplate, sizeof(priv->sync_msg));
+
+	/* decrease the rx_urb_size and max_tx_size to 4k on USB 1.1 */
+	dev->rx_urb_size  = SIERRA_NET_RX_URB_SIZE;
+	if (dev->udev->speed != USB_SPEED_HIGH)
+		dev->rx_urb_size  = min_t(size_t, 4096, SIERRA_NET_RX_URB_SIZE);
+
+	dev->net->hard_header_len += SIERRA_NET_HIP_EXT_HDR_LEN;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	dev->net->max_mtu = SIERRA_NET_MAX_SUPPORTED_MTU;
+
+	/* Set up the netdev */
+	dev->net->flags |= IFF_NOARP;
+	dev->net->ethtool_ops = &sierra_net_ethtool_ops;
+	netif_carrier_off(dev->net);
+
+	sierra_net_set_private(dev, priv);
+
+	priv->kevent_flags = 0;
+
+	/* Use the shared workqueue */
+	INIT_WORK(&priv->sierra_net_kevent, sierra_net_kevent);
+
+	/* Only need to do this once */
+	timer_setup(&priv->sync_timer, sierra_sync_timer, 0);
+
+	/* verify fw attributes */
+	status = sierra_net_get_fw_attr(dev, &fwattr);
+	dev_dbg(&dev->udev->dev, "Fw attr: %x\n", fwattr);
+
+	/* test whether firmware supports DHCP */
+	if (!(status == sizeof(fwattr) && (fwattr & SWI_GET_FW_ATTR_MASK))) {
+		/* found incompatible firmware version */
+		dev_err(&dev->udev->dev, "Incompatible driver and firmware"
+			" versions\n");
+		kfree(priv);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void sierra_net_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	int status;
+	struct sierra_net_data *priv = sierra_net_get_private(dev);
+
+	dev_dbg(&dev->udev->dev, "%s", __func__);
+
+	/* kill the timer and work */
+	del_timer_sync(&priv->sync_timer);
+	cancel_work_sync(&priv->sierra_net_kevent);
+
+	/* tell modem we are going away */
+	status = sierra_net_send_cmd(dev, priv->shdwn_msg,
+			sizeof(priv->shdwn_msg), "Shutdown");
+	if (status < 0)
+		netdev_err(dev->net,
+			"usb_control_msg failed, status %d\n", status);
+
+	usbnet_status_stop(dev);
+
+	sierra_net_set_private(dev, NULL);
+	kfree(priv);
+}
+
+static struct sk_buff *sierra_net_skb_clone(struct usbnet *dev,
+		struct sk_buff *skb, int len)
+{
+	struct sk_buff *new_skb;
+
+	/* clone skb */
+	new_skb = skb_clone(skb, GFP_ATOMIC);
+
+	/* remove len bytes from original */
+	skb_pull(skb, len);
+
+	/* trim next packet to it's length */
+	if (new_skb) {
+		skb_trim(new_skb, len);
+	} else {
+		if (netif_msg_rx_err(dev))
+			netdev_err(dev->net, "failed to get skb\n");
+		dev->net->stats.rx_dropped++;
+	}
+
+	return new_skb;
+}
+
+/* ---------------------------- Receive data path ----------------------*/
+static int sierra_net_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int err;
+	struct hip_hdr  hh;
+	struct sk_buff *new_skb;
+
+	dev_dbg(&dev->udev->dev, "%s", __func__);
+
+	/* could contain multiple packets */
+	while (likely(skb->len)) {
+		err = parse_hip(skb->data, skb->len, &hh);
+		if (err) {
+			if (netif_msg_rx_err(dev))
+				netdev_err(dev->net, "Invalid HIP header %d\n",
+					err);
+			/* dev->net->stats.rx_errors incremented by caller */
+			dev->net->stats.rx_length_errors++;
+			return 0;
+		}
+
+		/* Validate Extended HIP header */
+		if (!hh.extmsgid.is_present
+		    || hh.extmsgid.word != SIERRA_NET_HIP_EXT_IP_IN_ID) {
+			if (netif_msg_rx_err(dev))
+				netdev_err(dev->net, "HIP/ETH: Invalid pkt\n");
+
+			dev->net->stats.rx_frame_errors++;
+			/* dev->net->stats.rx_errors incremented by caller */
+			return 0;
+		}
+
+		skb_pull(skb, hh.hdrlen);
+
+		/* We are going to accept this packet, prepare it.
+		 * In case protocol is IPv6, keep it, otherwise force IPv4.
+		 */
+		skb_reset_mac_header(skb);
+		if (eth_hdr(skb)->h_proto != cpu_to_be16(ETH_P_IPV6))
+			eth_hdr(skb)->h_proto = cpu_to_be16(ETH_P_IP);
+		eth_zero_addr(eth_hdr(skb)->h_source);
+		memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
+
+		/* Last packet in batch handled by usbnet */
+		if (hh.payload_len.word == skb->len)
+			return 1;
+
+		new_skb = sierra_net_skb_clone(dev, skb, hh.payload_len.word);
+		if (new_skb)
+			usbnet_skb_return(dev, new_skb);
+
+	} /* while */
+
+	return 0;
+}
+
+/* ---------------------------- Transmit data path ----------------------*/
+static struct sk_buff *sierra_net_tx_fixup(struct usbnet *dev,
+					   struct sk_buff *skb, gfp_t flags)
+{
+	struct sierra_net_data *priv = sierra_net_get_private(dev);
+	u16 len;
+	bool need_tail;
+
+	BUILD_BUG_ON(sizeof_field(struct usbnet, data)
+				< sizeof(struct cdc_state));
+
+	dev_dbg(&dev->udev->dev, "%s", __func__);
+	if (priv->link_up && check_ethip_packet(skb, dev) && is_ip(skb)) {
+		/* enough head room as is? */
+		if (SIERRA_NET_HIP_EXT_HDR_LEN <= skb_headroom(skb)) {
+			/* Save the Eth/IP length and set up HIP hdr */
+			len = skb->len;
+			skb_push(skb, SIERRA_NET_HIP_EXT_HDR_LEN);
+			/* Handle ZLP issue */
+			need_tail = ((len + SIERRA_NET_HIP_EXT_HDR_LEN)
+				% dev->maxpacket == 0);
+			if (need_tail) {
+				if (unlikely(skb_tailroom(skb) == 0)) {
+					netdev_err(dev->net, "tx_fixup:"
+						"no room for packet\n");
+					dev_kfree_skb_any(skb);
+					return NULL;
+				} else {
+					skb->data[skb->len] = 0;
+					__skb_put(skb, 1);
+					len = len + 1;
+				}
+			}
+			build_hip(skb->data, len, priv);
+			return skb;
+		} else {
+			/*
+			 * compensate in the future if necessary
+			 */
+			netdev_err(dev->net, "tx_fixup: no room for HIP\n");
+		} /* headroom */
+	}
+
+	if (!priv->link_up)
+		dev->net->stats.tx_carrier_errors++;
+
+	/* tx_dropped incremented by usbnet */
+
+	/* filter the packet out, release it  */
+	dev_kfree_skb_any(skb);
+	return NULL;
+}
+
+static const struct driver_info sierra_net_info_direct_ip = {
+	.description = "Sierra Wireless USB-to-WWAN Modem",
+	.flags = FLAG_WWAN | FLAG_SEND_ZLP,
+	.bind = sierra_net_bind,
+	.unbind = sierra_net_unbind,
+	.status = sierra_net_status,
+	.rx_fixup = sierra_net_rx_fixup,
+	.tx_fixup = sierra_net_tx_fixup,
+};
+
+static int
+sierra_net_probe(struct usb_interface *udev, const struct usb_device_id *prod)
+{
+	int ret;
+
+	ret = usbnet_probe(udev, prod);
+	if (ret == 0) {
+		struct usbnet *dev = usb_get_intfdata(udev);
+
+		ret = usbnet_status_start(dev, GFP_KERNEL);
+		if (ret == 0) {
+			/* Interrupt URB now set up; initiate sync sequence */
+			sierra_net_dosync(dev);
+		}
+	}
+	return ret;
+}
+
+#define DIRECT_IP_DEVICE(vend, prod) \
+	{USB_DEVICE_INTERFACE_NUMBER(vend, prod, 7), \
+	.driver_info = (unsigned long)&sierra_net_info_direct_ip}, \
+	{USB_DEVICE_INTERFACE_NUMBER(vend, prod, 10), \
+	.driver_info = (unsigned long)&sierra_net_info_direct_ip}, \
+	{USB_DEVICE_INTERFACE_NUMBER(vend, prod, 11), \
+	.driver_info = (unsigned long)&sierra_net_info_direct_ip}
+
+static const struct usb_device_id products[] = {
+	DIRECT_IP_DEVICE(0x1199, 0x68A3), /* Sierra Wireless USB-to-WWAN modem */
+	DIRECT_IP_DEVICE(0x0F3D, 0x68A3), /* AT&T Direct IP modem */
+	DIRECT_IP_DEVICE(0x1199, 0x68AA), /* Sierra Wireless Direct IP LTE modem */
+	DIRECT_IP_DEVICE(0x0F3D, 0x68AA), /* AT&T Direct IP LTE modem */
+
+	{}, /* last item */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+/* We are based on usbnet, so let it handle the USB driver specifics */
+static struct usb_driver sierra_net_driver = {
+	.name = "sierra_net",
+	.id_table = products,
+	.probe = sierra_net_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+	.no_dynamic_id = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(sierra_net_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
new file mode 100644
index 000000000..78ad2da3e
--- /dev/null
+++ b/drivers/net/usb/smsc75xx.c
@@ -0,0 +1,2354 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/bitrev.h>
+#include <linux/crc16.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/of_net.h>
+#include "smsc75xx.h"
+
+#define SMSC_CHIPNAME			"smsc75xx"
+#define SMSC_DRIVER_VERSION		"1.0.0"
+#define HS_USB_PKT_SIZE			(512)
+#define FS_USB_PKT_SIZE			(64)
+#define DEFAULT_HS_BURST_CAP_SIZE	(16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE	(6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY		(0x00002000)
+#define MAX_SINGLE_PACKET_SIZE		(9000)
+#define LAN75XX_EEPROM_MAGIC		(0x7500)
+#define EEPROM_MAC_OFFSET		(0x01)
+#define DEFAULT_TX_CSUM_ENABLE		(true)
+#define DEFAULT_RX_CSUM_ENABLE		(true)
+#define SMSC75XX_INTERNAL_PHY_ID	(1)
+#define SMSC75XX_TX_OVERHEAD		(8)
+#define MAX_RX_FIFO_SIZE		(20 * 1024)
+#define MAX_TX_FIFO_SIZE		(12 * 1024)
+#define USB_VENDOR_ID_SMSC		(0x0424)
+#define USB_PRODUCT_ID_LAN7500		(0x7500)
+#define USB_PRODUCT_ID_LAN7505		(0x7505)
+#define RXW_PADDING			2
+#define SUPPORTED_WAKE			(WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
+					 WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
+
+#define SUSPEND_SUSPEND0		(0x01)
+#define SUSPEND_SUSPEND1		(0x02)
+#define SUSPEND_SUSPEND2		(0x04)
+#define SUSPEND_SUSPEND3		(0x08)
+#define SUSPEND_ALLMODES		(SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
+					 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
+
+struct smsc75xx_priv {
+	struct usbnet *dev;
+	u32 rfe_ctl;
+	u32 wolopts;
+	u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
+	struct mutex dataport_mutex;
+	spinlock_t rfe_ctl_lock;
+	struct work_struct set_multicast;
+	u8 suspend_flags;
+};
+
+struct usb_context {
+	struct usb_ctrlrequest req;
+	struct usbnet *dev;
+};
+
+static bool turbo_mode = true;
+module_param(turbo_mode, bool, 0644);
+MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+
+static int smsc75xx_link_ok_nopm(struct usbnet *dev);
+static int smsc75xx_phy_gig_workaround(struct usbnet *dev);
+
+static int __must_check __smsc75xx_read_reg(struct usbnet *dev, u32 index,
+					    u32 *data, int in_pm)
+{
+	u32 buf;
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
+		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 0, index, &buf, 4);
+	if (unlikely(ret < 4)) {
+		ret = ret < 0 ? ret : -ENODATA;
+
+		netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
+			    index, ret);
+		return ret;
+	}
+
+	le32_to_cpus(&buf);
+	*data = buf;
+
+	return ret;
+}
+
+static int __must_check __smsc75xx_write_reg(struct usbnet *dev, u32 index,
+					     u32 data, int in_pm)
+{
+	u32 buf;
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	buf = data;
+	cpu_to_le32s(&buf);
+
+	ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
+		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 0, index, &buf, 4);
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+static int __must_check smsc75xx_read_reg_nopm(struct usbnet *dev, u32 index,
+					       u32 *data)
+{
+	return __smsc75xx_read_reg(dev, index, data, 1);
+}
+
+static int __must_check smsc75xx_write_reg_nopm(struct usbnet *dev, u32 index,
+						u32 data)
+{
+	return __smsc75xx_write_reg(dev, index, data, 1);
+}
+
+static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
+					  u32 *data)
+{
+	return __smsc75xx_read_reg(dev, index, data, 0);
+}
+
+static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
+					   u32 data)
+{
+	return __smsc75xx_write_reg(dev, index, data, 0);
+}
+
+/* Loop until the read is completed with timeout
+ * called with phy_mutex held */
+static __must_check int __smsc75xx_phy_wait_not_busy(struct usbnet *dev,
+						     int in_pm)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = __smsc75xx_read_reg(dev, MII_ACCESS, &val, in_pm);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading MII_ACCESS\n");
+			return ret;
+		}
+
+		if (!(val & MII_ACCESS_BUSY))
+			return 0;
+	} while (!time_after(jiffies, start_time + HZ));
+
+	return -EIO;
+}
+
+static int __smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx,
+				int in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "MII is busy in smsc75xx_mdio_read\n");
+		goto done;
+	}
+
+	/* set the address, index & direction (read from PHY) */
+	phy_id &= dev->mii.phy_id_mask;
+	idx &= dev->mii.reg_num_mask;
+	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+		| MII_ACCESS_READ | MII_ACCESS_BUSY;
+	ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing MII_ACCESS\n");
+		goto done;
+	}
+
+	ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
+		goto done;
+	}
+
+	ret = __smsc75xx_read_reg(dev, MII_DATA, &val, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading MII_DATA\n");
+		goto done;
+	}
+
+	ret = (u16)(val & 0xFFFF);
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static void __smsc75xx_mdio_write(struct net_device *netdev, int phy_id,
+				  int idx, int regval, int in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "MII is busy in smsc75xx_mdio_write\n");
+		goto done;
+	}
+
+	val = regval;
+	ret = __smsc75xx_write_reg(dev, MII_DATA, val, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing MII_DATA\n");
+		goto done;
+	}
+
+	/* set the address, index & direction (write to PHY) */
+	phy_id &= dev->mii.phy_id_mask;
+	idx &= dev->mii.reg_num_mask;
+	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
+		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
+		| MII_ACCESS_WRITE | MII_ACCESS_BUSY;
+	ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing MII_ACCESS\n");
+		goto done;
+	}
+
+	ret = __smsc75xx_phy_wait_not_busy(dev, in_pm);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
+		goto done;
+	}
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+}
+
+static int smsc75xx_mdio_read_nopm(struct net_device *netdev, int phy_id,
+				   int idx)
+{
+	return __smsc75xx_mdio_read(netdev, phy_id, idx, 1);
+}
+
+static void smsc75xx_mdio_write_nopm(struct net_device *netdev, int phy_id,
+				     int idx, int regval)
+{
+	__smsc75xx_mdio_write(netdev, phy_id, idx, regval, 1);
+}
+
+static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
+{
+	return __smsc75xx_mdio_read(netdev, phy_id, idx, 0);
+}
+
+static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
+				int regval)
+{
+	__smsc75xx_mdio_write(netdev, phy_id, idx, regval, 0);
+}
+
+static int smsc75xx_wait_eeprom(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_CMD\n");
+			return ret;
+		}
+
+		if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
+			break;
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
+		netdev_warn(dev->net, "EEPROM read operation timeout\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_CMD\n");
+			return ret;
+		}
+
+		if (!(val & E2P_CMD_BUSY))
+			return 0;
+
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	netdev_warn(dev->net, "EEPROM is busy\n");
+	return -EIO;
+}
+
+static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc75xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+		val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
+		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_CMD\n");
+			return ret;
+		}
+
+		ret = smsc75xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_DATA\n");
+			return ret;
+		}
+
+		data[i] = val & 0xFF;
+		offset++;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				 u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc75xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	/* Issue write/erase enable command */
+	val = E2P_CMD_BUSY | E2P_CMD_EWEN;
+	ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing E2P_CMD\n");
+		return ret;
+	}
+
+	ret = smsc75xx_wait_eeprom(dev);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+
+		/* Fill data register */
+		val = data[i];
+		ret = smsc75xx_write_reg(dev, E2P_DATA, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_DATA\n");
+			return ret;
+		}
+
+		/* Send "write" command */
+		val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
+		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_CMD\n");
+			return ret;
+		}
+
+		ret = smsc75xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		offset++;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
+{
+	int i, ret;
+
+	for (i = 0; i < 100; i++) {
+		u32 dp_sel;
+		ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading DP_SEL\n");
+			return ret;
+		}
+
+		if (dp_sel & DP_SEL_DPRDY)
+			return 0;
+
+		udelay(40);
+	}
+
+	netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out\n");
+
+	return -EIO;
+}
+
+static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
+				   u32 length, u32 *buf)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 dp_sel;
+	int i, ret;
+
+	mutex_lock(&pdata->dataport_mutex);
+
+	ret = smsc75xx_dataport_wait_not_busy(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "smsc75xx_dataport_write busy on entry\n");
+		goto done;
+	}
+
+	ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading DP_SEL\n");
+		goto done;
+	}
+
+	dp_sel &= ~DP_SEL_RSEL;
+	dp_sel |= ram_select;
+	ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing DP_SEL\n");
+		goto done;
+	}
+
+	for (i = 0; i < length; i++) {
+		ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing DP_ADDR\n");
+			goto done;
+		}
+
+		ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing DP_DATA\n");
+			goto done;
+		}
+
+		ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing DP_CMD\n");
+			goto done;
+		}
+
+		ret = smsc75xx_dataport_wait_not_busy(dev);
+		if (ret < 0) {
+			netdev_warn(dev->net, "smsc75xx_dataport_write timeout\n");
+			goto done;
+		}
+	}
+
+done:
+	mutex_unlock(&pdata->dataport_mutex);
+	return ret;
+}
+
+/* returns hash bit number for given MAC address */
+static u32 smsc75xx_hash(char addr[ETH_ALEN])
+{
+	return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
+}
+
+static void smsc75xx_deferred_multicast_write(struct work_struct *param)
+{
+	struct smsc75xx_priv *pdata =
+		container_of(param, struct smsc75xx_priv, set_multicast);
+	struct usbnet *dev = pdata->dev;
+	int ret;
+
+	netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x\n",
+		  pdata->rfe_ctl);
+
+	smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
+		DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	if (ret < 0)
+		netdev_warn(dev->net, "Error writing RFE_CRL\n");
+}
+
+static void smsc75xx_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+	pdata->rfe_ctl &=
+		~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
+	pdata->rfe_ctl |= RFE_CTL_AB;
+
+	for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
+		pdata->multicast_hash_table[i] = 0;
+
+	if (dev->net->flags & IFF_PROMISC) {
+		netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
+		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
+	} else if (dev->net->flags & IFF_ALLMULTI) {
+		netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
+		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
+	} else if (!netdev_mc_empty(dev->net)) {
+		struct netdev_hw_addr *ha;
+
+		netif_dbg(dev, drv, dev->net, "receive multicast hash filter\n");
+
+		pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
+
+		netdev_for_each_mc_addr(ha, netdev) {
+			u32 bitnum = smsc75xx_hash(ha->addr);
+			pdata->multicast_hash_table[bitnum / 32] |=
+				(1 << (bitnum % 32));
+		}
+	} else {
+		netif_dbg(dev, drv, dev->net, "receive own packets only\n");
+		pdata->rfe_ctl |= RFE_CTL_DPF;
+	}
+
+	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+
+	/* defer register writes to a sleepable context */
+	schedule_work(&pdata->set_multicast);
+}
+
+static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
+					    u16 lcladv, u16 rmtadv)
+{
+	u32 flow = 0, fct_flow = 0;
+	int ret;
+
+	if (duplex == DUPLEX_FULL) {
+		u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
+
+		if (cap & FLOW_CTRL_TX) {
+			flow = (FLOW_TX_FCEN | 0xFFFF);
+			/* set fct_flow thresholds to 20% and 80% */
+			fct_flow = (8 << 8) | 32;
+		}
+
+		if (cap & FLOW_CTRL_RX)
+			flow |= FLOW_RX_FCEN;
+
+		netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
+			  (cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
+			  (cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
+	} else {
+		netif_dbg(dev, link, dev->net, "half duplex\n");
+	}
+
+	ret = smsc75xx_write_reg(dev, FLOW, flow);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing FLOW\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing FCT_FLOW\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_link_reset(struct usbnet *dev)
+{
+	struct mii_if_info *mii = &dev->mii;
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	u16 lcladv, rmtadv;
+	int ret;
+
+	/* write to clear phy interrupt status */
+	smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC,
+		PHY_INT_SRC_CLEAR_ALL);
+
+	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing INT_STS\n");
+		return ret;
+	}
+
+	mii_check_media(mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
+	rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
+
+	netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n",
+		  ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv);
+
+	return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
+}
+
+static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
+{
+	u32 intdata;
+
+	if (urb->actual_length != 4) {
+		netdev_warn(dev->net, "unexpected urb length %d\n",
+			    urb->actual_length);
+		return;
+	}
+
+	intdata = get_unaligned_le32(urb->transfer_buffer);
+
+	netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
+
+	if (intdata & INT_ENP_PHY_INT)
+		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+	else
+		netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
+			    intdata);
+}
+
+static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
+{
+	return MAX_EEPROM_SIZE;
+}
+
+static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	ee->magic = LAN75XX_EEPROM_MAGIC;
+
+	return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	if (ee->magic != LAN75XX_EEPROM_MAGIC) {
+		netdev_warn(dev->net, "EEPROM: magic value mismatch: 0x%x\n",
+			    ee->magic);
+		return -EINVAL;
+	}
+
+	return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static void smsc75xx_ethtool_get_wol(struct net_device *net,
+				     struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+
+	wolinfo->supported = SUPPORTED_WAKE;
+	wolinfo->wolopts = pdata->wolopts;
+}
+
+static int smsc75xx_ethtool_set_wol(struct net_device *net,
+				    struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	int ret;
+
+	if (wolinfo->wolopts & ~SUPPORTED_WAKE)
+		return -EINVAL;
+
+	pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
+
+	ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
+	if (ret < 0)
+		netdev_warn(dev->net, "device_set_wakeup_enable error %d\n", ret);
+
+	return ret;
+}
+
+static const struct ethtool_ops smsc75xx_ethtool_ops = {
+	.get_link	= usbnet_get_link,
+	.nway_reset	= usbnet_nway_reset,
+	.get_drvinfo	= usbnet_get_drvinfo,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_eeprom_len	= smsc75xx_ethtool_get_eeprom_len,
+	.get_eeprom	= smsc75xx_ethtool_get_eeprom,
+	.set_eeprom	= smsc75xx_ethtool_set_eeprom,
+	.get_wol	= smsc75xx_ethtool_get_wol,
+	.set_wol	= smsc75xx_ethtool_set_wol,
+	.get_link_ksettings	= usbnet_get_link_ksettings_mii,
+	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
+};
+
+static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static void smsc75xx_init_mac_address(struct usbnet *dev)
+{
+	u8 addr[ETH_ALEN];
+
+	/* maybe the boot loader passed the MAC address in devicetree */
+	if (!platform_get_ethdev_address(&dev->udev->dev, dev->net)) {
+		if (is_valid_ether_addr(dev->net->dev_addr)) {
+			/* device tree values are valid so use them */
+			netif_dbg(dev, ifup, dev->net, "MAC address read from the device tree\n");
+			return;
+		}
+	}
+
+	/* try reading mac address from EEPROM */
+	if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, addr) == 0) {
+		eth_hw_addr_set(dev->net, addr);
+		if (is_valid_ether_addr(dev->net->dev_addr)) {
+			/* eeprom values are valid so use them */
+			netif_dbg(dev, ifup, dev->net,
+				  "MAC address read from EEPROM\n");
+			return;
+		}
+	}
+
+	/* no useful static MAC address found. generate a random one */
+	eth_hw_addr_random(dev->net);
+	netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
+}
+
+static int smsc75xx_set_mac_address(struct usbnet *dev)
+{
+	u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
+		dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
+	u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
+
+	int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write RX_ADDRH: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write RX_ADDRL: %d\n", ret);
+		return ret;
+	}
+
+	addr_hi |= ADDR_FILTX_FB_VALID;
+	ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write ADDR_FILTX: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
+	if (ret < 0)
+		netdev_warn(dev->net, "Failed to write ADDR_FILTX+4: %d\n", ret);
+
+	return ret;
+}
+
+static int smsc75xx_phy_initialize(struct usbnet *dev)
+{
+	int bmcr, ret, timeout = 0;
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = smsc75xx_mdio_read;
+	dev->mii.mdio_write = smsc75xx_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.supports_gmii = 1;
+	dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
+
+	/* reset phy and wait for reset to complete */
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+
+	do {
+		msleep(10);
+		bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
+		if (bmcr < 0) {
+			netdev_warn(dev->net, "Error reading MII_BMCR\n");
+			return bmcr;
+		}
+		timeout++;
+	} while ((bmcr & BMCR_RESET) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout on PHY Reset\n");
+		return -EIO;
+	}
+
+	/* phy workaround for gig link */
+	smsc75xx_phy_gig_workaround(dev);
+
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
+		ADVERTISE_PAUSE_ASYM);
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
+		ADVERTISE_1000FULL);
+
+	/* read and write to clear phy interrupt status */
+	ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PHY_INT_SRC\n");
+		return ret;
+	}
+
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff);
+
+	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
+		PHY_INT_MASK_DEFAULT);
+	mii_nway_restart(&dev->mii);
+
+	netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n");
+	return 0;
+}
+
+static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
+{
+	int ret = 0;
+	u32 buf;
+	bool rxenabled;
+
+	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret);
+		return ret;
+	}
+
+	rxenabled = ((buf & MAC_RX_RXEN) != 0);
+
+	if (rxenabled) {
+		buf &= ~MAC_RX_RXEN;
+		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+			return ret;
+		}
+	}
+
+	/* add 4 to size for FCS */
+	buf &= ~MAC_RX_MAX_SIZE;
+	buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
+
+	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+		return ret;
+	}
+
+	if (rxenabled) {
+		buf |= MAC_RX_RXEN;
+		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	int ret;
+
+	ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to set mac rx frame length\n");
+		return ret;
+	}
+
+	return usbnet_change_mtu(netdev, new_mtu);
+}
+
+/* Enable or disable Rx checksum offload engine */
+static int smsc75xx_set_features(struct net_device *netdev,
+	netdev_features_t features)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
+
+	if (features & NETIF_F_RXCSUM)
+		pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
+	else
+		pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
+
+	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
+	/* it's racing here! */
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing RFE_CTL\n");
+		return ret;
+	}
+	return 0;
+}
+
+static int smsc75xx_wait_ready(struct usbnet *dev, int in_pm)
+{
+	int timeout = 0;
+
+	do {
+		u32 buf;
+		int ret;
+
+		ret = __smsc75xx_read_reg(dev, PMT_CTL, &buf, in_pm);
+
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
+			return ret;
+		}
+
+		if (buf & PMT_CTL_DEV_RDY)
+			return 0;
+
+		msleep(10);
+		timeout++;
+	} while (timeout < 100);
+
+	netdev_warn(dev->net, "timeout waiting for device ready\n");
+	return -EIO;
+}
+
+static int smsc75xx_phy_gig_workaround(struct usbnet *dev)
+{
+	struct mii_if_info *mii = &dev->mii;
+	int ret = 0, timeout = 0;
+	u32 buf, link_up = 0;
+
+	/* Set the phy in Gig loopback */
+	smsc75xx_mdio_write(dev->net, mii->phy_id, MII_BMCR, 0x4040);
+
+	/* Wait for the link up */
+	do {
+		link_up = smsc75xx_link_ok_nopm(dev);
+		usleep_range(10000, 20000);
+		timeout++;
+	} while ((!link_up) && (timeout < 1000));
+
+	if (timeout >= 1000) {
+		netdev_warn(dev->net, "Timeout waiting for PHY link up\n");
+		return -EIO;
+	}
+
+	/* phy reset */
+	ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
+		return ret;
+	}
+
+	buf |= PMT_CTL_PHY_RST;
+
+	ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write PMT_CTL: %d\n", ret);
+		return ret;
+	}
+
+	timeout = 0;
+	do {
+		usleep_range(10000, 20000);
+		ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n",
+				    ret);
+			return ret;
+		}
+		timeout++;
+	} while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_reset(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 buf;
+	int ret = 0, timeout;
+
+	netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset\n");
+
+	ret = smsc75xx_wait_ready(dev, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "device not ready in smsc75xx_reset\n");
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	buf |= HW_CFG_LRST;
+
+	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	timeout = 0;
+	do {
+		msleep(10);
+		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+			return ret;
+		}
+		timeout++;
+	} while ((buf & HW_CFG_LRST) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout on completion of Lite Reset\n");
+		return -EIO;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY\n");
+
+	ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
+		return ret;
+	}
+
+	buf |= PMT_CTL_PHY_RST;
+
+	ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write PMT_CTL: %d\n", ret);
+		return ret;
+	}
+
+	timeout = 0;
+	do {
+		msleep(10);
+		ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret);
+			return ret;
+		}
+		timeout++;
+	} while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout waiting for PHY Reset\n");
+		return -EIO;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "PHY reset complete\n");
+
+	ret = smsc75xx_set_mac_address(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to set mac address\n");
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
+		  dev->net->dev_addr);
+
+	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
+		  buf);
+
+	buf |= HW_CFG_BIR;
+
+	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net,  "Failed to write HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after writing HW_CFG_BIR: 0x%08x\n",
+		  buf);
+
+	if (!turbo_mode) {
+		buf = 0;
+		dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+	} else if (dev->udev->speed == USB_SPEED_HIGH) {
+		buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+	} else {
+		buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
+		  (ulong)dev->rx_urb_size);
+
+	ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write BURST_CAP: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read BURST_CAP: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BURST_CAP after writing: 0x%08x\n", buf);
+
+	ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write BULK_IN_DLY: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read BULK_IN_DLY: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BULK_IN_DLY after writing: 0x%08x\n", buf);
+
+	if (turbo_mode) {
+		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+			return ret;
+		}
+
+		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf);
+
+		buf |= (HW_CFG_MEF | HW_CFG_BCE);
+
+		ret = smsc75xx_write_reg(dev, HW_CFG, buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret);
+			return ret;
+		}
+
+		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret);
+			return ret;
+		}
+
+		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf);
+	}
+
+	/* set FIFO sizes */
+	buf = (MAX_RX_FIFO_SIZE - 512) / 512;
+	ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_RX_FIFO_END: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x\n", buf);
+
+	buf = (MAX_TX_FIFO_SIZE - 512) / 512;
+	ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_TX_FIFO_END: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x\n", buf);
+
+	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write INT_STS: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, ID_REV, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", buf);
+
+	ret = smsc75xx_read_reg(dev, E2P_CMD, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read E2P_CMD: %d\n", ret);
+		return ret;
+	}
+
+	/* only set default GPIO/LED settings if no EEPROM is detected */
+	if (!(buf & E2P_CMD_LOADED)) {
+		ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to read LED_GPIO_CFG: %d\n", ret);
+			return ret;
+		}
+
+		buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
+		buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
+
+		ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Failed to write LED_GPIO_CFG: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = smsc75xx_write_reg(dev, FLOW, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FLOW: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_FLOW: %d\n", ret);
+		return ret;
+	}
+
+	/* Don't need rfe_ctl_lock during initialisation */
+	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read RFE_CTL: %d\n", ret);
+		return ret;
+	}
+
+	pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
+
+	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write RFE_CTL: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read RFE_CTL: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x\n",
+		  pdata->rfe_ctl);
+
+	/* Enable or disable checksum offload engines */
+	smsc75xx_set_features(dev->net, dev->net->features);
+
+	smsc75xx_set_multicast(dev->net);
+
+	ret = smsc75xx_phy_initialize(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to initialize PHY: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read INT_EP_CTL: %d\n", ret);
+		return ret;
+	}
+
+	/* enable PHY interrupts */
+	buf |= INT_ENP_PHY_INT;
+
+	ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write INT_EP_CTL: %d\n", ret);
+		return ret;
+	}
+
+	/* allow mac to detect speed and duplex from phy */
+	ret = smsc75xx_read_reg(dev, MAC_CR, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_CR: %d\n", ret);
+		return ret;
+	}
+
+	buf |= (MAC_CR_ADD | MAC_CR_ASD);
+	ret = smsc75xx_write_reg(dev, MAC_CR, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_CR: %d\n", ret);
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_TX: %d\n", ret);
+		return ret;
+	}
+
+	buf |= MAC_TX_TXEN;
+
+	ret = smsc75xx_write_reg(dev, MAC_TX, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_TX: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x\n", buf);
+
+	ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read FCT_TX_CTL: %d\n", ret);
+		return ret;
+	}
+
+	buf |= FCT_TX_CTL_EN;
+
+	ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_TX_CTL: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf);
+
+	ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to set max rx frame length\n");
+		return ret;
+	}
+
+	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret);
+		return ret;
+	}
+
+	buf |= MAC_RX_RXEN;
+
+	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x\n", buf);
+
+	ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read FCT_RX_CTL: %d\n", ret);
+		return ret;
+	}
+
+	buf |= FCT_RX_CTL_EN;
+
+	ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write FCT_RX_CTL: %d\n", ret);
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x\n", buf);
+
+	netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0\n");
+	return 0;
+}
+
+static const struct net_device_ops smsc75xx_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_change_mtu		= smsc75xx_change_mtu,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= smsc75xx_ioctl,
+	.ndo_set_rx_mode	= smsc75xx_set_multicast,
+	.ndo_set_features	= smsc75xx_set_features,
+};
+
+static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc75xx_priv *pdata = NULL;
+	int ret;
+
+	printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
+		return ret;
+	}
+
+	dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
+					      GFP_KERNEL);
+
+	pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	if (!pdata)
+		return -ENOMEM;
+
+	pdata->dev = dev;
+
+	spin_lock_init(&pdata->rfe_ctl_lock);
+	mutex_init(&pdata->dataport_mutex);
+
+	INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
+
+	if (DEFAULT_TX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+
+	if (DEFAULT_RX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_RXCSUM;
+
+	dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+				NETIF_F_RXCSUM;
+
+	ret = smsc75xx_wait_ready(dev, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "device not ready in smsc75xx_bind\n");
+		goto free_pdata;
+	}
+
+	smsc75xx_init_mac_address(dev);
+
+	/* Init all registers */
+	ret = smsc75xx_reset(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "smsc75xx_reset error %d\n", ret);
+		goto cancel_work;
+	}
+
+	dev->net->netdev_ops = &smsc75xx_netdev_ops;
+	dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
+	dev->net->flags |= IFF_MULTICAST;
+	dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+	dev->net->max_mtu = MAX_SINGLE_PACKET_SIZE;
+	return 0;
+
+cancel_work:
+	cancel_work_sync(&pdata->set_multicast);
+free_pdata:
+	kfree(pdata);
+	dev->data[0] = 0;
+	return ret;
+}
+
+static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	if (pdata) {
+		cancel_work_sync(&pdata->set_multicast);
+		netif_dbg(dev, ifdown, dev->net, "free pdata\n");
+		kfree(pdata);
+		dev->data[0] = 0;
+	}
+}
+
+static u16 smsc_crc(const u8 *buffer, size_t len)
+{
+	return bitrev16(crc16(0xFFFF, buffer, len));
+}
+
+static int smsc75xx_write_wuff(struct usbnet *dev, int filter, u32 wuf_cfg,
+			       u32 wuf_mask1)
+{
+	int cfg_base = WUF_CFGX + filter * 4;
+	int mask_base = WUF_MASKX + filter * 16;
+	int ret;
+
+	ret = smsc75xx_write_reg(dev, cfg_base, wuf_cfg);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_CFGX\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, mask_base, wuf_mask1);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_MASKX\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, mask_base + 4, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_MASKX\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, mask_base + 8, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_MASKX\n");
+		return ret;
+	}
+
+	ret = smsc75xx_write_reg(dev, mask_base + 12, 0);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUF_MASKX\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int smsc75xx_enter_suspend0(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PMT_CTL\n");
+		return ret;
+	}
+
+	val &= (~(PMT_CTL_SUS_MODE | PMT_CTL_PHY_RST));
+	val |= PMT_CTL_SUS_MODE_0 | PMT_CTL_WOL_EN | PMT_CTL_WUPS;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND0;
+
+	return 0;
+}
+
+static int smsc75xx_enter_suspend1(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PMT_CTL\n");
+		return ret;
+	}
+
+	val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
+	val |= PMT_CTL_SUS_MODE_1;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	/* clear wol status, enable energy detection */
+	val &= ~PMT_CTL_WUPS;
+	val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN);
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND1;
+
+	return 0;
+}
+
+static int smsc75xx_enter_suspend2(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PMT_CTL\n");
+		return ret;
+	}
+
+	val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
+	val |= PMT_CTL_SUS_MODE_2;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND2;
+
+	return 0;
+}
+
+static int smsc75xx_enter_suspend3(struct usbnet *dev)
+{
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val;
+	int ret;
+
+	ret = smsc75xx_read_reg_nopm(dev, FCT_RX_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading FCT_RX_CTL\n");
+		return ret;
+	}
+
+	if (val & FCT_RX_CTL_RXUSED) {
+		netdev_dbg(dev->net, "rx fifo not empty in autosuspend\n");
+		return -EBUSY;
+	}
+
+	ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PMT_CTL\n");
+		return ret;
+	}
+
+	val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST);
+	val |= PMT_CTL_SUS_MODE_3 | PMT_CTL_RES_CLR_WKP_EN;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	/* clear wol status */
+	val &= ~PMT_CTL_WUPS;
+	val |= PMT_CTL_WUPS_WOL;
+
+	ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing PMT_CTL\n");
+		return ret;
+	}
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND3;
+
+	return 0;
+}
+
+static int smsc75xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask)
+{
+	struct mii_if_info *mii = &dev->mii;
+	int ret;
+
+	netdev_dbg(dev->net, "enabling PHY wakeup interrupts\n");
+
+	/* read to clear */
+	ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PHY_INT_SRC\n");
+		return ret;
+	}
+
+	/* enable interrupt source */
+	ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading PHY_INT_MASK\n");
+		return ret;
+	}
+
+	ret |= mask;
+
+	smsc75xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_INT_MASK, ret);
+
+	return 0;
+}
+
+static int smsc75xx_link_ok_nopm(struct usbnet *dev)
+{
+	struct mii_if_info *mii = &dev->mii;
+	int ret;
+
+	/* first, a dummy read, needed to latch some MII phys */
+	ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading MII_BMSR\n");
+		return ret;
+	}
+
+	ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading MII_BMSR\n");
+		return ret;
+	}
+
+	return !!(ret & BMSR_LSTATUS);
+}
+
+static int smsc75xx_autosuspend(struct usbnet *dev, u32 link_up)
+{
+	int ret;
+
+	if (!netif_running(dev->net)) {
+		/* interface is ifconfig down so fully power down hw */
+		netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n");
+		return smsc75xx_enter_suspend2(dev);
+	}
+
+	if (!link_up) {
+		/* link is down so enter EDPD mode */
+		netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n");
+
+		/* enable PHY wakeup events for if cable is attached */
+		ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
+			PHY_INT_MASK_ANEG_COMP);
+		if (ret < 0) {
+			netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
+			return ret;
+		}
+
+		netdev_info(dev->net, "entering SUSPEND1 mode\n");
+		return smsc75xx_enter_suspend1(dev);
+	}
+
+	/* enable PHY wakeup events so we remote wakeup if cable is pulled */
+	ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
+		PHY_INT_MASK_LINK_DOWN);
+	if (ret < 0) {
+		netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
+		return ret;
+	}
+
+	netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n");
+	return smsc75xx_enter_suspend3(dev);
+}
+
+static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u32 val, link_up;
+	int ret;
+
+	ret = usbnet_suspend(intf, message);
+	if (ret < 0) {
+		netdev_warn(dev->net, "usbnet_suspend error\n");
+		return ret;
+	}
+
+	if (pdata->suspend_flags) {
+		netdev_warn(dev->net, "error during last resume\n");
+		pdata->suspend_flags = 0;
+	}
+
+	/* determine if link is up using only _nopm functions */
+	link_up = smsc75xx_link_ok_nopm(dev);
+
+	if (message.event == PM_EVENT_AUTO_SUSPEND) {
+		ret = smsc75xx_autosuspend(dev, link_up);
+		goto done;
+	}
+
+	/* if we get this far we're not autosuspending */
+	/* if no wol options set, or if link is down and we're not waking on
+	 * PHY activity, enter lowest power SUSPEND2 mode
+	 */
+	if (!(pdata->wolopts & SUPPORTED_WAKE) ||
+		!(link_up || (pdata->wolopts & WAKE_PHY))) {
+		netdev_info(dev->net, "entering SUSPEND2 mode\n");
+
+		/* disable energy detect (link up) & wake up events */
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val &= ~(WUCSR_MPEN | WUCSR_WUEN);
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+
+		ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading PMT_CTL\n");
+			goto done;
+		}
+
+		val &= ~(PMT_CTL_ED_EN | PMT_CTL_WOL_EN);
+
+		ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing PMT_CTL\n");
+			goto done;
+		}
+
+		ret = smsc75xx_enter_suspend2(dev);
+		goto done;
+	}
+
+	if (pdata->wolopts & WAKE_PHY) {
+		ret = smsc75xx_enable_phy_wakeup_interrupts(dev,
+			(PHY_INT_MASK_ANEG_COMP | PHY_INT_MASK_LINK_DOWN));
+		if (ret < 0) {
+			netdev_warn(dev->net, "error enabling PHY wakeup ints\n");
+			goto done;
+		}
+
+		/* if link is down then configure EDPD and enter SUSPEND1,
+		 * otherwise enter SUSPEND0 below
+		 */
+		if (!link_up) {
+			struct mii_if_info *mii = &dev->mii;
+			netdev_info(dev->net, "entering SUSPEND1 mode\n");
+
+			/* enable energy detect power-down mode */
+			ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id,
+				PHY_MODE_CTRL_STS);
+			if (ret < 0) {
+				netdev_warn(dev->net, "Error reading PHY_MODE_CTRL_STS\n");
+				goto done;
+			}
+
+			ret |= MODE_CTRL_STS_EDPWRDOWN;
+
+			smsc75xx_mdio_write_nopm(dev->net, mii->phy_id,
+				PHY_MODE_CTRL_STS, ret);
+
+			/* enter SUSPEND1 mode */
+			ret = smsc75xx_enter_suspend1(dev);
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & (WAKE_MCAST | WAKE_ARP)) {
+		int i, filter = 0;
+
+		/* disable all filters */
+		for (i = 0; i < WUF_NUM; i++) {
+			ret = smsc75xx_write_reg_nopm(dev, WUF_CFGX + i * 4, 0);
+			if (ret < 0) {
+				netdev_warn(dev->net, "Error writing WUF_CFGX\n");
+				goto done;
+			}
+		}
+
+		if (pdata->wolopts & WAKE_MCAST) {
+			const u8 mcast[] = {0x01, 0x00, 0x5E};
+			netdev_info(dev->net, "enabling multicast detection\n");
+
+			val = WUF_CFGX_EN | WUF_CFGX_ATYPE_MULTICAST
+				| smsc_crc(mcast, 3);
+			ret = smsc75xx_write_wuff(dev, filter++, val, 0x0007);
+			if (ret < 0) {
+				netdev_warn(dev->net, "Error writing wakeup filter\n");
+				goto done;
+			}
+		}
+
+		if (pdata->wolopts & WAKE_ARP) {
+			const u8 arp[] = {0x08, 0x06};
+			netdev_info(dev->net, "enabling ARP detection\n");
+
+			val = WUF_CFGX_EN | WUF_CFGX_ATYPE_ALL | (0x0C << 16)
+				| smsc_crc(arp, 2);
+			ret = smsc75xx_write_wuff(dev, filter++, val, 0x0003);
+			if (ret < 0) {
+				netdev_warn(dev->net, "Error writing wakeup filter\n");
+				goto done;
+			}
+		}
+
+		/* clear any pending pattern match packet status */
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val |= WUCSR_WUFR;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+
+		netdev_info(dev->net, "enabling packet match detection\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val |= WUCSR_WUEN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	} else {
+		netdev_info(dev->net, "disabling packet match detection\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val &= ~WUCSR_WUEN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	}
+
+	/* disable magic, bcast & unicast wakeup sources */
+	ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error reading WUCSR\n");
+		goto done;
+	}
+
+	val &= ~(WUCSR_MPEN | WUCSR_BCST_EN | WUCSR_PFDA_EN);
+
+	ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing WUCSR\n");
+		goto done;
+	}
+
+	if (pdata->wolopts & WAKE_PHY) {
+		netdev_info(dev->net, "enabling PHY wakeup\n");
+
+		ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading PMT_CTL\n");
+			goto done;
+		}
+
+		/* clear wol status, enable energy detection */
+		val &= ~PMT_CTL_WUPS;
+		val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN);
+
+		ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing PMT_CTL\n");
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & WAKE_MAGIC) {
+		netdev_info(dev->net, "enabling magic packet wakeup\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		/* clear any pending magic packet status */
+		val |= WUCSR_MPR | WUCSR_MPEN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & WAKE_BCAST) {
+		netdev_info(dev->net, "enabling broadcast detection\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val |= WUCSR_BCAST_FR | WUCSR_BCST_EN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & WAKE_UCAST) {
+		netdev_info(dev->net, "enabling unicast detection\n");
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			goto done;
+		}
+
+		val |= WUCSR_WUFR | WUCSR_PFDA_EN;
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			goto done;
+		}
+	}
+
+	/* enable receiver to enable frame reception */
+	ret = smsc75xx_read_reg_nopm(dev, MAC_RX, &val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret);
+		goto done;
+	}
+
+	val |= MAC_RX_RXEN;
+
+	ret = smsc75xx_write_reg_nopm(dev, MAC_RX, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret);
+		goto done;
+	}
+
+	/* some wol options are enabled, so enter SUSPEND0 */
+	netdev_info(dev->net, "entering SUSPEND0 mode\n");
+	ret = smsc75xx_enter_suspend0(dev);
+
+done:
+	/*
+	 * TODO: resume() might need to handle the suspend failure
+	 * in system sleep
+	 */
+	if (ret && PMSG_IS_AUTO(message))
+		usbnet_resume(intf);
+	return ret;
+}
+
+static int smsc75xx_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
+	u8 suspend_flags = pdata->suspend_flags;
+	int ret;
+	u32 val;
+
+	netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags);
+
+	/* do this first to ensure it's cleared even in error case */
+	pdata->suspend_flags = 0;
+
+	if (suspend_flags & SUSPEND_ALLMODES) {
+		/* Disable wakeup sources */
+		ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading WUCSR\n");
+			return ret;
+		}
+
+		val &= ~(WUCSR_WUEN | WUCSR_MPEN | WUCSR_PFDA_EN
+			| WUCSR_BCST_EN);
+
+		ret = smsc75xx_write_reg_nopm(dev, WUCSR, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing WUCSR\n");
+			return ret;
+		}
+
+		/* clear wake-up status */
+		ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading PMT_CTL\n");
+			return ret;
+		}
+
+		val &= ~PMT_CTL_WOL_EN;
+		val |= PMT_CTL_WUPS;
+
+		ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing PMT_CTL\n");
+			return ret;
+		}
+	}
+
+	if (suspend_flags & SUSPEND_SUSPEND2) {
+		netdev_info(dev->net, "resuming from SUSPEND2\n");
+
+		ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading PMT_CTL\n");
+			return ret;
+		}
+
+		val |= PMT_CTL_PHY_PWRUP;
+
+		ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing PMT_CTL\n");
+			return ret;
+		}
+	}
+
+	ret = smsc75xx_wait_ready(dev, 1);
+	if (ret < 0) {
+		netdev_warn(dev->net, "device not ready in smsc75xx_resume\n");
+		return ret;
+	}
+
+	return usbnet_resume(intf);
+}
+
+static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb,
+				     u32 rx_cmd_a, u32 rx_cmd_b)
+{
+	if (!(dev->net->features & NETIF_F_RXCSUM) ||
+	    unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
+		skb->ip_summed = CHECKSUM_NONE;
+	} else {
+		skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
+		skb->ip_summed = CHECKSUM_COMPLETE;
+	}
+}
+
+static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	while (skb->len > 0) {
+		u32 rx_cmd_a, rx_cmd_b, align_count, size;
+		struct sk_buff *ax_skb;
+		unsigned char *packet;
+
+		rx_cmd_a = get_unaligned_le32(skb->data);
+		skb_pull(skb, 4);
+
+		rx_cmd_b = get_unaligned_le32(skb->data);
+		skb_pull(skb, 4 + RXW_PADDING);
+
+		packet = skb->data;
+
+		/* get the packet length */
+		size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
+		align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
+
+		if (unlikely(size > skb->len)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "size err rx_cmd_a=0x%08x\n",
+				  rx_cmd_a);
+			return 0;
+		}
+
+		if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "Error rx_cmd_a=0x%08x\n", rx_cmd_a);
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_dropped++;
+
+			if (rx_cmd_a & RX_CMD_A_FCS)
+				dev->net->stats.rx_crc_errors++;
+			else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
+				dev->net->stats.rx_frame_errors++;
+		} else {
+			/* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
+			if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
+				netif_dbg(dev, rx_err, dev->net,
+					  "size err rx_cmd_a=0x%08x\n",
+					  rx_cmd_a);
+				return 0;
+			}
+
+			/* last frame in this batch */
+			if (skb->len == size) {
+				smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a,
+					rx_cmd_b);
+
+				skb_trim(skb, skb->len - 4); /* remove fcs */
+				skb->truesize = size + sizeof(struct sk_buff);
+
+				return 1;
+			}
+
+			ax_skb = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!ax_skb)) {
+				netdev_warn(dev->net, "Error allocating skb\n");
+				return 0;
+			}
+
+			ax_skb->len = size;
+			ax_skb->data = packet;
+			skb_set_tail_pointer(ax_skb, size);
+
+			smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a,
+				rx_cmd_b);
+
+			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
+			ax_skb->truesize = size + sizeof(struct sk_buff);
+
+			usbnet_skb_return(dev, ax_skb);
+		}
+
+		skb_pull(skb, size);
+
+		/* padding bytes before the next frame starts */
+		if (skb->len)
+			skb_pull(skb, align_count);
+	}
+
+	return 1;
+}
+
+static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
+					 struct sk_buff *skb, gfp_t flags)
+{
+	u32 tx_cmd_a, tx_cmd_b;
+	void *ptr;
+
+	if (skb_cow_head(skb, SMSC75XX_TX_OVERHEAD)) {
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+
+	tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
+
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
+
+	if (skb_is_gso(skb)) {
+		u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
+		tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
+
+		tx_cmd_a |= TX_CMD_A_LSO;
+	} else {
+		tx_cmd_b = 0;
+	}
+
+	ptr = skb_push(skb, 8);
+	put_unaligned_le32(tx_cmd_a, ptr);
+	put_unaligned_le32(tx_cmd_b, ptr + 4);
+
+	return skb;
+}
+
+static int smsc75xx_manage_power(struct usbnet *dev, int on)
+{
+	dev->intf->needs_remote_wakeup = on;
+	return 0;
+}
+
+static const struct driver_info smsc75xx_info = {
+	.description	= "smsc75xx USB 2.0 Gigabit Ethernet",
+	.bind		= smsc75xx_bind,
+	.unbind		= smsc75xx_unbind,
+	.link_reset	= smsc75xx_link_reset,
+	.reset		= smsc75xx_reset,
+	.rx_fixup	= smsc75xx_rx_fixup,
+	.tx_fixup	= smsc75xx_tx_fixup,
+	.status		= smsc75xx_status,
+	.manage_power	= smsc75xx_manage_power,
+	.flags		= FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		/* SMSC7500 USB Gigabit Ethernet Device */
+		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
+		.driver_info = (unsigned long) &smsc75xx_info,
+	},
+	{
+		/* SMSC7500 USB Gigabit Ethernet Device */
+		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
+		.driver_info = (unsigned long) &smsc75xx_info,
+	},
+	{ },		/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver smsc75xx_driver = {
+	.name		= SMSC_CHIPNAME,
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.suspend	= smsc75xx_suspend,
+	.resume		= smsc75xx_resume,
+	.reset_resume	= smsc75xx_resume,
+	.disconnect	= usbnet_disconnect,
+	.disable_hub_initiated_lpm = 1,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(smsc75xx_driver);
+
+MODULE_AUTHOR("Nancy Lin");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
+MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/smsc75xx.h b/drivers/net/usb/smsc75xx.h
new file mode 100644
index 000000000..49738caba
--- /dev/null
+++ b/drivers/net/usb/smsc75xx.h
@@ -0,0 +1,409 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2010 SMSC
+ *
+ *****************************************************************************/
+
+#ifndef _SMSC75XX_H
+#define _SMSC75XX_H
+
+/* Tx command words */
+#define TX_CMD_A_LSO			(0x08000000)
+#define TX_CMD_A_IPE			(0x04000000)
+#define TX_CMD_A_TPE			(0x02000000)
+#define TX_CMD_A_IVTG			(0x01000000)
+#define TX_CMD_A_RVTG			(0x00800000)
+#define TX_CMD_A_FCS			(0x00400000)
+#define TX_CMD_A_LEN			(0x000FFFFF)
+
+#define TX_CMD_B_MSS			(0x3FFF0000)
+#define TX_CMD_B_MSS_SHIFT		(16)
+#define TX_MSS_MIN			((u16)8)
+#define TX_CMD_B_VTAG			(0x0000FFFF)
+
+/* Rx command words */
+#define RX_CMD_A_ICE			(0x80000000)
+#define RX_CMD_A_TCE			(0x40000000)
+#define RX_CMD_A_IPV			(0x20000000)
+#define RX_CMD_A_PID			(0x18000000)
+#define RX_CMD_A_PID_NIP		(0x00000000)
+#define RX_CMD_A_PID_TCP		(0x08000000)
+#define RX_CMD_A_PID_UDP		(0x10000000)
+#define RX_CMD_A_PID_PP			(0x18000000)
+#define RX_CMD_A_PFF			(0x04000000)
+#define RX_CMD_A_BAM			(0x02000000)
+#define RX_CMD_A_MAM			(0x01000000)
+#define RX_CMD_A_FVTG			(0x00800000)
+#define RX_CMD_A_RED			(0x00400000)
+#define RX_CMD_A_RWT			(0x00200000)
+#define RX_CMD_A_RUNT			(0x00100000)
+#define RX_CMD_A_LONG			(0x00080000)
+#define RX_CMD_A_RXE			(0x00040000)
+#define RX_CMD_A_DRB			(0x00020000)
+#define RX_CMD_A_FCS			(0x00010000)
+#define RX_CMD_A_UAM			(0x00008000)
+#define RX_CMD_A_LCSM			(0x00004000)
+#define RX_CMD_A_LEN			(0x00003FFF)
+
+#define RX_CMD_B_CSUM			(0xFFFF0000)
+#define RX_CMD_B_CSUM_SHIFT		(16)
+#define RX_CMD_B_VTAG			(0x0000FFFF)
+
+/* SCSRs */
+#define ID_REV				(0x0000)
+
+#define FPGA_REV			(0x0004)
+
+#define BOND_CTL			(0x0008)
+
+#define INT_STS				(0x000C)
+#define INT_STS_RDFO_INT		(0x00400000)
+#define INT_STS_TXE_INT			(0x00200000)
+#define INT_STS_MACRTO_INT		(0x00100000)
+#define INT_STS_TX_DIS_INT		(0x00080000)
+#define INT_STS_RX_DIS_INT		(0x00040000)
+#define INT_STS_PHY_INT_		(0x00020000)
+#define INT_STS_MAC_ERR_INT		(0x00008000)
+#define INT_STS_TDFU			(0x00004000)
+#define INT_STS_TDFO			(0x00002000)
+#define INT_STS_GPIOS			(0x00000FFF)
+#define INT_STS_CLEAR_ALL		(0xFFFFFFFF)
+
+#define HW_CFG				(0x0010)
+#define HW_CFG_SMDET_STS		(0x00008000)
+#define HW_CFG_SMDET_EN			(0x00004000)
+#define HW_CFG_EEM			(0x00002000)
+#define HW_CFG_RST_PROTECT		(0x00001000)
+#define HW_CFG_PORT_SWAP		(0x00000800)
+#define HW_CFG_PHY_BOOST		(0x00000600)
+#define HW_CFG_PHY_BOOST_NORMAL		(0x00000000)
+#define HW_CFG_PHY_BOOST_4		(0x00002000)
+#define HW_CFG_PHY_BOOST_8		(0x00004000)
+#define HW_CFG_PHY_BOOST_12		(0x00006000)
+#define HW_CFG_LEDB			(0x00000100)
+#define HW_CFG_BIR			(0x00000080)
+#define HW_CFG_SBP			(0x00000040)
+#define HW_CFG_IME			(0x00000020)
+#define HW_CFG_MEF			(0x00000010)
+#define HW_CFG_ETC			(0x00000008)
+#define HW_CFG_BCE			(0x00000004)
+#define HW_CFG_LRST			(0x00000002)
+#define HW_CFG_SRST			(0x00000001)
+
+#define PMT_CTL				(0x0014)
+#define PMT_CTL_PHY_PWRUP		(0x00000400)
+#define PMT_CTL_RES_CLR_WKP_EN		(0x00000100)
+#define PMT_CTL_DEV_RDY			(0x00000080)
+#define PMT_CTL_SUS_MODE		(0x00000060)
+#define PMT_CTL_SUS_MODE_0		(0x00000000)
+#define PMT_CTL_SUS_MODE_1		(0x00000020)
+#define PMT_CTL_SUS_MODE_2		(0x00000040)
+#define PMT_CTL_SUS_MODE_3		(0x00000060)
+#define PMT_CTL_PHY_RST			(0x00000010)
+#define PMT_CTL_WOL_EN			(0x00000008)
+#define PMT_CTL_ED_EN			(0x00000004)
+#define PMT_CTL_WUPS			(0x00000003)
+#define PMT_CTL_WUPS_NO			(0x00000000)
+#define PMT_CTL_WUPS_ED			(0x00000001)
+#define PMT_CTL_WUPS_WOL		(0x00000002)
+#define PMT_CTL_WUPS_MULTI		(0x00000003)
+
+#define LED_GPIO_CFG			(0x0018)
+#define LED_GPIO_CFG_LED2_FUN_SEL	(0x80000000)
+#define LED_GPIO_CFG_LED10_FUN_SEL	(0x40000000)
+#define LED_GPIO_CFG_LEDGPIO_EN		(0x0000F000)
+#define LED_GPIO_CFG_LEDGPIO_EN_0	(0x00001000)
+#define LED_GPIO_CFG_LEDGPIO_EN_1	(0x00002000)
+#define LED_GPIO_CFG_LEDGPIO_EN_2	(0x00004000)
+#define LED_GPIO_CFG_LEDGPIO_EN_3	(0x00008000)
+#define LED_GPIO_CFG_GPBUF		(0x00000F00)
+#define LED_GPIO_CFG_GPBUF_0		(0x00000100)
+#define LED_GPIO_CFG_GPBUF_1		(0x00000200)
+#define LED_GPIO_CFG_GPBUF_2		(0x00000400)
+#define LED_GPIO_CFG_GPBUF_3		(0x00000800)
+#define LED_GPIO_CFG_GPDIR		(0x000000F0)
+#define LED_GPIO_CFG_GPDIR_0		(0x00000010)
+#define LED_GPIO_CFG_GPDIR_1		(0x00000020)
+#define LED_GPIO_CFG_GPDIR_2		(0x00000040)
+#define LED_GPIO_CFG_GPDIR_3		(0x00000080)
+#define LED_GPIO_CFG_GPDATA		(0x0000000F)
+#define LED_GPIO_CFG_GPDATA_0		(0x00000001)
+#define LED_GPIO_CFG_GPDATA_1		(0x00000002)
+#define LED_GPIO_CFG_GPDATA_2		(0x00000004)
+#define LED_GPIO_CFG_GPDATA_3		(0x00000008)
+
+#define GPIO_CFG			(0x001C)
+#define GPIO_CFG_SHIFT			(24)
+#define GPIO_CFG_GPEN			(0xFF000000)
+#define GPIO_CFG_GPBUF			(0x00FF0000)
+#define GPIO_CFG_GPDIR			(0x0000FF00)
+#define GPIO_CFG_GPDATA			(0x000000FF)
+
+#define GPIO_WAKE			(0x0020)
+#define GPIO_WAKE_PHY_LINKUP_EN		(0x80000000)
+#define GPIO_WAKE_POL			(0x0FFF0000)
+#define GPIO_WAKE_POL_SHIFT		(16)
+#define GPIO_WAKE_WK			(0x00000FFF)
+
+#define DP_SEL				(0x0024)
+#define DP_SEL_DPRDY			(0x80000000)
+#define DP_SEL_RSEL			(0x0000000F)
+#define DP_SEL_URX			(0x00000000)
+#define DP_SEL_VHF			(0x00000001)
+#define DP_SEL_VHF_HASH_LEN		(16)
+#define DP_SEL_VHF_VLAN_LEN		(128)
+#define DP_SEL_LSO_HEAD			(0x00000002)
+#define DP_SEL_FCT_RX			(0x00000003)
+#define DP_SEL_FCT_TX			(0x00000004)
+#define DP_SEL_DESCRIPTOR		(0x00000005)
+#define DP_SEL_WOL			(0x00000006)
+
+#define DP_CMD				(0x0028)
+#define DP_CMD_WRITE			(0x01)
+#define DP_CMD_READ			(0x00)
+
+#define DP_ADDR				(0x002C)
+
+#define DP_DATA				(0x0030)
+
+#define BURST_CAP			(0x0034)
+#define BURST_CAP_MASK			(0x0000000F)
+
+#define INT_EP_CTL			(0x0038)
+#define INT_EP_CTL_INTEP_ON		(0x80000000)
+#define INT_EP_CTL_RDFO_EN		(0x00400000)
+#define INT_EP_CTL_TXE_EN		(0x00200000)
+#define INT_EP_CTL_MACROTO_EN		(0x00100000)
+#define INT_EP_CTL_TX_DIS_EN		(0x00080000)
+#define INT_EP_CTL_RX_DIS_EN		(0x00040000)
+#define INT_EP_CTL_PHY_EN_		(0x00020000)
+#define INT_EP_CTL_MAC_ERR_EN		(0x00008000)
+#define INT_EP_CTL_TDFU_EN		(0x00004000)
+#define INT_EP_CTL_TDFO_EN		(0x00002000)
+#define INT_EP_CTL_RX_FIFO_EN		(0x00001000)
+#define INT_EP_CTL_GPIOX_EN		(0x00000FFF)
+
+#define BULK_IN_DLY			(0x003C)
+#define BULK_IN_DLY_MASK		(0xFFFF)
+
+#define E2P_CMD				(0x0040)
+#define E2P_CMD_BUSY			(0x80000000)
+#define E2P_CMD_MASK			(0x70000000)
+#define E2P_CMD_READ			(0x00000000)
+#define E2P_CMD_EWDS			(0x10000000)
+#define E2P_CMD_EWEN			(0x20000000)
+#define E2P_CMD_WRITE			(0x30000000)
+#define E2P_CMD_WRAL			(0x40000000)
+#define E2P_CMD_ERASE			(0x50000000)
+#define E2P_CMD_ERAL			(0x60000000)
+#define E2P_CMD_RELOAD			(0x70000000)
+#define E2P_CMD_TIMEOUT			(0x00000400)
+#define E2P_CMD_LOADED			(0x00000200)
+#define E2P_CMD_ADDR			(0x000001FF)
+
+#define MAX_EEPROM_SIZE			(512)
+
+#define E2P_DATA			(0x0044)
+#define E2P_DATA_MASK_			(0x000000FF)
+
+#define RFE_CTL				(0x0060)
+#define RFE_CTL_TCPUDP_CKM		(0x00001000)
+#define RFE_CTL_IP_CKM			(0x00000800)
+#define RFE_CTL_AB			(0x00000400)
+#define RFE_CTL_AM			(0x00000200)
+#define RFE_CTL_AU			(0x00000100)
+#define RFE_CTL_VS			(0x00000080)
+#define RFE_CTL_UF			(0x00000040)
+#define RFE_CTL_VF			(0x00000020)
+#define RFE_CTL_SPF			(0x00000010)
+#define RFE_CTL_MHF			(0x00000008)
+#define RFE_CTL_DHF			(0x00000004)
+#define RFE_CTL_DPF			(0x00000002)
+#define RFE_CTL_RST_RF			(0x00000001)
+
+#define VLAN_TYPE			(0x0064)
+#define VLAN_TYPE_MASK			(0x0000FFFF)
+
+#define FCT_RX_CTL			(0x0090)
+#define FCT_RX_CTL_EN			(0x80000000)
+#define FCT_RX_CTL_RST			(0x40000000)
+#define FCT_RX_CTL_SBF			(0x02000000)
+#define FCT_RX_CTL_OVERFLOW		(0x01000000)
+#define FCT_RX_CTL_FRM_DROP		(0x00800000)
+#define FCT_RX_CTL_RX_NOT_EMPTY		(0x00400000)
+#define FCT_RX_CTL_RX_EMPTY		(0x00200000)
+#define FCT_RX_CTL_RX_DISABLED		(0x00100000)
+#define FCT_RX_CTL_RXUSED		(0x0000FFFF)
+
+#define FCT_TX_CTL			(0x0094)
+#define FCT_TX_CTL_EN			(0x80000000)
+#define FCT_TX_CTL_RST			(0x40000000)
+#define FCT_TX_CTL_TX_NOT_EMPTY		(0x00400000)
+#define FCT_TX_CTL_TX_EMPTY		(0x00200000)
+#define FCT_TX_CTL_TX_DISABLED		(0x00100000)
+#define FCT_TX_CTL_TXUSED		(0x0000FFFF)
+
+#define FCT_RX_FIFO_END			(0x0098)
+#define FCT_RX_FIFO_END_MASK		(0x0000007F)
+
+#define FCT_TX_FIFO_END			(0x009C)
+#define FCT_TX_FIFO_END_MASK		(0x0000003F)
+
+#define FCT_FLOW			(0x00A0)
+#define FCT_FLOW_THRESHOLD_OFF		(0x00007F00)
+#define FCT_FLOW_THRESHOLD_OFF_SHIFT	(8)
+#define FCT_FLOW_THRESHOLD_ON		(0x0000007F)
+
+/* MAC CSRs */
+#define MAC_CR				(0x100)
+#define MAC_CR_ADP			(0x00002000)
+#define MAC_CR_ADD			(0x00001000)
+#define MAC_CR_ASD			(0x00000800)
+#define MAC_CR_INT_LOOP			(0x00000400)
+#define MAC_CR_BOLMT			(0x000000C0)
+#define MAC_CR_FDPX			(0x00000008)
+#define MAC_CR_CFG			(0x00000006)
+#define MAC_CR_CFG_10			(0x00000000)
+#define MAC_CR_CFG_100			(0x00000002)
+#define MAC_CR_CFG_1000			(0x00000004)
+#define MAC_CR_RST			(0x00000001)
+
+#define MAC_RX				(0x104)
+#define MAC_RX_MAX_SIZE			(0x3FFF0000)
+#define MAC_RX_MAX_SIZE_SHIFT		(16)
+#define MAC_RX_FCS_STRIP		(0x00000010)
+#define MAC_RX_FSE			(0x00000004)
+#define MAC_RX_RXD			(0x00000002)
+#define MAC_RX_RXEN			(0x00000001)
+
+#define MAC_TX				(0x108)
+#define MAC_TX_BFCS			(0x00000004)
+#define MAC_TX_TXD			(0x00000002)
+#define MAC_TX_TXEN			(0x00000001)
+
+#define FLOW				(0x10C)
+#define FLOW_FORCE_FC			(0x80000000)
+#define FLOW_TX_FCEN			(0x40000000)
+#define FLOW_RX_FCEN			(0x20000000)
+#define FLOW_FPF			(0x10000000)
+#define FLOW_PAUSE_TIME			(0x0000FFFF)
+
+#define RAND_SEED			(0x110)
+#define RAND_SEED_MASK			(0x0000FFFF)
+
+#define ERR_STS				(0x114)
+#define ERR_STS_FCS_ERR			(0x00000100)
+#define ERR_STS_LFRM_ERR		(0x00000080)
+#define ERR_STS_RUNT_ERR		(0x00000040)
+#define ERR_STS_COLLISION_ERR		(0x00000010)
+#define ERR_STS_ALIGN_ERR		(0x00000008)
+#define ERR_STS_URUN_ERR		(0x00000004)
+
+#define RX_ADDRH			(0x118)
+#define RX_ADDRH_MASK			(0x0000FFFF)
+
+#define RX_ADDRL			(0x11C)
+
+#define MII_ACCESS			(0x120)
+#define MII_ACCESS_PHY_ADDR		(0x0000F800)
+#define MII_ACCESS_PHY_ADDR_SHIFT	(11)
+#define MII_ACCESS_REG_ADDR		(0x000007C0)
+#define MII_ACCESS_REG_ADDR_SHIFT	(6)
+#define MII_ACCESS_READ			(0x00000000)
+#define MII_ACCESS_WRITE		(0x00000002)
+#define MII_ACCESS_BUSY			(0x00000001)
+
+#define MII_DATA			(0x124)
+#define MII_DATA_MASK			(0x0000FFFF)
+
+#define WUCSR				(0x140)
+#define WUCSR_PFDA_FR			(0x00000080)
+#define WUCSR_WUFR			(0x00000040)
+#define WUCSR_MPR			(0x00000020)
+#define WUCSR_BCAST_FR			(0x00000010)
+#define WUCSR_PFDA_EN			(0x00000008)
+#define WUCSR_WUEN			(0x00000004)
+#define WUCSR_MPEN			(0x00000002)
+#define WUCSR_BCST_EN			(0x00000001)
+
+#define WUF_CFGX			(0x144)
+#define WUF_CFGX_EN			(0x80000000)
+#define WUF_CFGX_ATYPE			(0x03000000)
+#define WUF_CFGX_ATYPE_UNICAST		(0x00000000)
+#define WUF_CFGX_ATYPE_MULTICAST	(0x02000000)
+#define WUF_CFGX_ATYPE_ALL		(0x03000000)
+#define WUF_CFGX_PATTERN_OFFSET		(0x007F0000)
+#define WUF_CFGX_PATTERN_OFFSET_SHIFT	(16)
+#define WUF_CFGX_CRC16			(0x0000FFFF)
+#define WUF_NUM				(8)
+
+#define WUF_MASKX			(0x170)
+#define WUF_MASKX_AVALID		(0x80000000)
+#define WUF_MASKX_ATYPE			(0x40000000)
+
+#define ADDR_FILTX			(0x300)
+#define ADDR_FILTX_FB_VALID		(0x80000000)
+#define ADDR_FILTX_FB_TYPE		(0x40000000)
+#define ADDR_FILTX_FB_ADDRHI		(0x0000FFFF)
+#define ADDR_FILTX_SB_ADDRLO		(0xFFFFFFFF)
+
+#define WUCSR2				(0x500)
+#define WUCSR2_NS_RCD			(0x00000040)
+#define WUCSR2_ARP_RCD			(0x00000020)
+#define WUCSR2_TCPSYN_RCD		(0x00000010)
+#define WUCSR2_NS_OFFLOAD		(0x00000004)
+#define WUCSR2_ARP_OFFLOAD		(0x00000002)
+#define WUCSR2_TCPSYN_OFFLOAD		(0x00000001)
+
+#define WOL_FIFO_STS			(0x504)
+
+#define IPV6_ADDRX			(0x510)
+
+#define IPV4_ADDRX			(0x590)
+
+
+/* Vendor-specific PHY Definitions */
+
+/* Mode Control/Status Register */
+#define PHY_MODE_CTRL_STS		(17)
+#define MODE_CTRL_STS_EDPWRDOWN		((u16)0x2000)
+#define MODE_CTRL_STS_ENERGYON		((u16)0x0002)
+
+#define PHY_INT_SRC			(29)
+#define PHY_INT_SRC_ENERGY_ON		((u16)0x0080)
+#define PHY_INT_SRC_ANEG_COMP		((u16)0x0040)
+#define PHY_INT_SRC_REMOTE_FAULT	((u16)0x0020)
+#define PHY_INT_SRC_LINK_DOWN		((u16)0x0010)
+#define PHY_INT_SRC_CLEAR_ALL		((u16)0xffff)
+
+#define PHY_INT_MASK			(30)
+#define PHY_INT_MASK_ENERGY_ON		((u16)0x0080)
+#define PHY_INT_MASK_ANEG_COMP		((u16)0x0040)
+#define PHY_INT_MASK_REMOTE_FAULT	((u16)0x0020)
+#define PHY_INT_MASK_LINK_DOWN		((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT		(PHY_INT_MASK_ANEG_COMP | \
+					 PHY_INT_MASK_LINK_DOWN)
+
+#define PHY_SPECIAL			(31)
+#define PHY_SPECIAL_SPD			((u16)0x001C)
+#define PHY_SPECIAL_SPD_10HALF		((u16)0x0004)
+#define PHY_SPECIAL_SPD_10FULL		((u16)0x0014)
+#define PHY_SPECIAL_SPD_100HALF		((u16)0x0008)
+#define PHY_SPECIAL_SPD_100FULL		((u16)0x0018)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER	0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER	0xA1
+#define USB_VENDOR_REQUEST_GET_STATS		0xA2
+
+/* Interrupt Endpoint status word bitfields */
+#define INT_ENP_RDFO_INT		((u32)BIT(22))
+#define INT_ENP_TXE_INT			((u32)BIT(21))
+#define INT_ENP_TX_DIS_INT		((u32)BIT(19))
+#define INT_ENP_RX_DIS_INT		((u32)BIT(18))
+#define INT_ENP_PHY_INT			((u32)BIT(17))
+#define INT_ENP_MAC_ERR_INT		((u32)BIT(15))
+#define INT_ENP_RX_FIFO_DATA_INT	((u32)BIT(12))
+
+#endif /* _SMSC75XX_H */
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
new file mode 100644
index 000000000..a530f20ee
--- /dev/null
+++ b/drivers/net/usb/smsc95xx.c
@@ -0,0 +1,2133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2008 SMSC
+ *
+ *****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/bitrev.h>
+#include <linux/crc16.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/of_net.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
+#include <net/selftests.h>
+
+#include "smsc95xx.h"
+
+#define SMSC_CHIPNAME			"smsc95xx"
+#define SMSC_DRIVER_VERSION		"2.0.0"
+#define HS_USB_PKT_SIZE			(512)
+#define FS_USB_PKT_SIZE			(64)
+#define DEFAULT_HS_BURST_CAP_SIZE	(16 * 1024 + 5 * HS_USB_PKT_SIZE)
+#define DEFAULT_FS_BURST_CAP_SIZE	(6 * 1024 + 33 * FS_USB_PKT_SIZE)
+#define DEFAULT_BULK_IN_DELAY		(0x00002000)
+#define MAX_SINGLE_PACKET_SIZE		(2048)
+#define LAN95XX_EEPROM_MAGIC		(0x9500)
+#define EEPROM_MAC_OFFSET		(0x01)
+#define DEFAULT_TX_CSUM_ENABLE		(true)
+#define DEFAULT_RX_CSUM_ENABLE		(true)
+#define SMSC95XX_INTERNAL_PHY_ID	(1)
+#define SMSC95XX_TX_OVERHEAD		(8)
+#define SMSC95XX_TX_OVERHEAD_CSUM	(12)
+#define SUPPORTED_WAKE			(WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \
+					 WAKE_MCAST | WAKE_ARP | WAKE_MAGIC)
+
+#define FEATURE_8_WAKEUP_FILTERS	(0x01)
+#define FEATURE_PHY_NLP_CROSSOVER	(0x02)
+#define FEATURE_REMOTE_WAKEUP		(0x04)
+
+#define SUSPEND_SUSPEND0		(0x01)
+#define SUSPEND_SUSPEND1		(0x02)
+#define SUSPEND_SUSPEND2		(0x04)
+#define SUSPEND_SUSPEND3		(0x08)
+#define SUSPEND_ALLMODES		(SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
+					 SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
+
+#define SMSC95XX_NR_IRQS		(1) /* raise to 12 for GPIOs */
+#define PHY_HWIRQ			(SMSC95XX_NR_IRQS - 1)
+
+struct smsc95xx_priv {
+	u32 mac_cr;
+	u32 hash_hi;
+	u32 hash_lo;
+	u32 wolopts;
+	spinlock_t mac_cr_lock;
+	u8 features;
+	u8 suspend_flags;
+	bool is_internal_phy;
+	struct irq_chip irqchip;
+	struct irq_domain *irqdomain;
+	struct fwnode_handle *irqfwnode;
+	struct mii_bus *mdiobus;
+	struct phy_device *phydev;
+	struct task_struct *pm_task;
+};
+
+static bool turbo_mode = true;
+module_param(turbo_mode, bool, 0644);
+MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
+
+static int __must_check smsc95xx_read_reg(struct usbnet *dev, u32 index,
+					  u32 *data)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	u32 buf;
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	if (current != pdata->pm_task)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
+		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 0, index, &buf, 4);
+	if (ret < 4) {
+		ret = ret < 0 ? ret : -ENODATA;
+
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
+				    index, ret);
+		return ret;
+	}
+
+	le32_to_cpus(&buf);
+	*data = buf;
+
+	return ret;
+}
+
+static int __must_check smsc95xx_write_reg(struct usbnet *dev, u32 index,
+					   u32 data)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	u32 buf;
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	if (current != pdata->pm_task)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	buf = data;
+	cpu_to_le32s(&buf);
+
+	ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
+		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 0, index, &buf, 4);
+	if (ret < 0 && ret != -ENODEV)
+		netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+/* Loop until the read is completed with timeout
+ * called with phy_mutex held */
+static int __must_check smsc95xx_phy_wait_not_busy(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc95xx_read_reg(dev, MII_ADDR, &val);
+		if (ret < 0) {
+			/* Ignore -ENODEV error during disconnect() */
+			if (ret == -ENODEV)
+				return 0;
+			netdev_warn(dev->net, "Error reading MII_ACCESS\n");
+			return ret;
+		}
+
+		if (!(val & MII_BUSY_))
+			return 0;
+	} while (!time_after(jiffies, start_time + HZ));
+
+	return -EIO;
+}
+
+static u32 mii_address_cmd(int phy_id, int idx, u16 op)
+{
+	return (phy_id & 0x1f) << 11 | (idx & 0x1f) << 6 | op;
+}
+
+static int smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx)
+{
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = smsc95xx_phy_wait_not_busy(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "%s: MII is busy\n", __func__);
+		goto done;
+	}
+
+	/* set the address, index & direction (read from PHY) */
+	addr = mii_address_cmd(phy_id, idx, MII_READ_ | MII_BUSY_);
+	ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
+	if (ret < 0) {
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Error writing MII_ADDR\n");
+		goto done;
+	}
+
+	ret = smsc95xx_phy_wait_not_busy(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx);
+		goto done;
+	}
+
+	ret = smsc95xx_read_reg(dev, MII_DATA, &val);
+	if (ret < 0) {
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Error reading MII_DATA\n");
+		goto done;
+	}
+
+	ret = (u16)(val & 0xFFFF);
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+
+	/* Ignore -ENODEV error during disconnect() */
+	if (ret == -ENODEV)
+		return 0;
+	return ret;
+}
+
+static void smsc95xx_mdio_write(struct usbnet *dev, int phy_id, int idx,
+				int regval)
+{
+	u32 val, addr;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	/* confirm MII not busy */
+	ret = smsc95xx_phy_wait_not_busy(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "%s: MII is busy\n", __func__);
+		goto done;
+	}
+
+	val = regval;
+	ret = smsc95xx_write_reg(dev, MII_DATA, val);
+	if (ret < 0) {
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Error writing MII_DATA\n");
+		goto done;
+	}
+
+	/* set the address, index & direction (write to PHY) */
+	addr = mii_address_cmd(phy_id, idx, MII_WRITE_ | MII_BUSY_);
+	ret = smsc95xx_write_reg(dev, MII_ADDR, addr);
+	if (ret < 0) {
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Error writing MII_ADDR\n");
+		goto done;
+	}
+
+	ret = smsc95xx_phy_wait_not_busy(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx);
+		goto done;
+	}
+
+done:
+	mutex_unlock(&dev->phy_mutex);
+}
+
+static int smsc95xx_mdiobus_reset(struct mii_bus *bus)
+{
+	struct smsc95xx_priv *pdata;
+	struct usbnet *dev;
+	u32 val;
+	int ret;
+
+	dev = bus->priv;
+	pdata = dev->driver_priv;
+
+	if (pdata->is_internal_phy)
+		return 0;
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+	if (ret < 0)
+		goto reset_out;
+
+	val |= PM_CTL_PHY_RST_;
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+	if (ret < 0)
+		goto reset_out;
+
+	/* Driver has no knowledge at this point about the external PHY.
+	 * The 802.3 specifies that the reset process shall
+	 * be completed within 0.5 s.
+	 */
+	fsleep(500000);
+
+reset_out:
+	mutex_unlock(&dev->phy_mutex);
+
+	return 0;
+}
+
+static int smsc95xx_mdiobus_read(struct mii_bus *bus, int phy_id, int idx)
+{
+	struct usbnet *dev = bus->priv;
+
+	return smsc95xx_mdio_read(dev, phy_id, idx);
+}
+
+static int smsc95xx_mdiobus_write(struct mii_bus *bus, int phy_id, int idx,
+				  u16 regval)
+{
+	struct usbnet *dev = bus->priv;
+
+	smsc95xx_mdio_write(dev, phy_id, idx, regval);
+	return 0;
+}
+
+static int __must_check smsc95xx_wait_eeprom(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_CMD\n");
+			return ret;
+		}
+
+		if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
+			break;
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
+		netdev_warn(dev->net, "EEPROM read operation timeout\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int __must_check smsc95xx_eeprom_confirm_not_busy(struct usbnet *dev)
+{
+	unsigned long start_time = jiffies;
+	u32 val;
+	int ret;
+
+	do {
+		ret = smsc95xx_read_reg(dev, E2P_CMD, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_CMD\n");
+			return ret;
+		}
+
+		if (!(val & E2P_CMD_BUSY_))
+			return 0;
+
+		udelay(40);
+	} while (!time_after(jiffies, start_time + HZ));
+
+	netdev_warn(dev->net, "EEPROM is busy\n");
+	return -EIO;
+}
+
+static int smsc95xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc95xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+		val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
+		ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_CMD\n");
+			return ret;
+		}
+
+		ret = smsc95xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		ret = smsc95xx_read_reg(dev, E2P_DATA, &val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error reading E2P_DATA\n");
+			return ret;
+		}
+
+		data[i] = val & 0xFF;
+		offset++;
+	}
+
+	return 0;
+}
+
+static int smsc95xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
+				 u8 *data)
+{
+	u32 val;
+	int i, ret;
+
+	BUG_ON(!dev);
+	BUG_ON(!data);
+
+	ret = smsc95xx_eeprom_confirm_not_busy(dev);
+	if (ret)
+		return ret;
+
+	/* Issue write/erase enable command */
+	val = E2P_CMD_BUSY_ | E2P_CMD_EWEN_;
+	ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Error writing E2P_DATA\n");
+		return ret;
+	}
+
+	ret = smsc95xx_wait_eeprom(dev);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < length; i++) {
+
+		/* Fill data register */
+		val = data[i];
+		ret = smsc95xx_write_reg(dev, E2P_DATA, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_DATA\n");
+			return ret;
+		}
+
+		/* Send "write" command */
+		val = E2P_CMD_BUSY_ | E2P_CMD_WRITE_ | (offset & E2P_CMD_ADDR_);
+		ret = smsc95xx_write_reg(dev, E2P_CMD, val);
+		if (ret < 0) {
+			netdev_warn(dev->net, "Error writing E2P_CMD\n");
+			return ret;
+		}
+
+		ret = smsc95xx_wait_eeprom(dev);
+		if (ret < 0)
+			return ret;
+
+		offset++;
+	}
+
+	return 0;
+}
+
+static int __must_check smsc95xx_write_reg_async(struct usbnet *dev, u16 index,
+						 u32 data)
+{
+	const u16 size = 4;
+	u32 buf;
+	int ret;
+
+	buf = data;
+	cpu_to_le32s(&buf);
+
+	ret = usbnet_write_cmd_async(dev, USB_VENDOR_REQUEST_WRITE_REGISTER,
+				     USB_DIR_OUT | USB_TYPE_VENDOR |
+				     USB_RECIP_DEVICE,
+				     0, index, &buf, size);
+	if (ret < 0)
+		netdev_warn(dev->net, "Error write async cmd, sts=%d\n",
+			    ret);
+	return ret;
+}
+
+/* returns hash bit number for given MAC address
+ * example:
+ * 01 00 5E 00 00 01 -> returns bit number 31 */
+static unsigned int smsc95xx_hash(char addr[ETH_ALEN])
+{
+	return (ether_crc(ETH_ALEN, addr) >> 26) & 0x3f;
+}
+
+static void smsc95xx_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	unsigned long flags;
+	int ret;
+
+	pdata->hash_hi = 0;
+	pdata->hash_lo = 0;
+
+	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+
+	if (dev->net->flags & IFF_PROMISC) {
+		netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n");
+		pdata->mac_cr |= MAC_CR_PRMS_;
+		pdata->mac_cr &= ~(MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
+	} else if (dev->net->flags & IFF_ALLMULTI) {
+		netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n");
+		pdata->mac_cr |= MAC_CR_MCPAS_;
+		pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_HPFILT_);
+	} else if (!netdev_mc_empty(dev->net)) {
+		struct netdev_hw_addr *ha;
+
+		pdata->mac_cr |= MAC_CR_HPFILT_;
+		pdata->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_);
+
+		netdev_for_each_mc_addr(ha, netdev) {
+			u32 bitnum = smsc95xx_hash(ha->addr);
+			u32 mask = 0x01 << (bitnum & 0x1F);
+			if (bitnum & 0x20)
+				pdata->hash_hi |= mask;
+			else
+				pdata->hash_lo |= mask;
+		}
+
+		netif_dbg(dev, drv, dev->net, "HASHH=0x%08X, HASHL=0x%08X\n",
+				   pdata->hash_hi, pdata->hash_lo);
+	} else {
+		netif_dbg(dev, drv, dev->net, "receive own packets only\n");
+		pdata->mac_cr &=
+			~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
+	}
+
+	spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+	/* Initiate async writes, as we can't wait for completion here */
+	ret = smsc95xx_write_reg_async(dev, HASHH, pdata->hash_hi);
+	if (ret < 0)
+		netdev_warn(dev->net, "failed to initiate async write to HASHH\n");
+
+	ret = smsc95xx_write_reg_async(dev, HASHL, pdata->hash_lo);
+	if (ret < 0)
+		netdev_warn(dev->net, "failed to initiate async write to HASHL\n");
+
+	ret = smsc95xx_write_reg_async(dev, MAC_CR, pdata->mac_cr);
+	if (ret < 0)
+		netdev_warn(dev->net, "failed to initiate async write to MAC_CR\n");
+}
+
+static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev)
+{
+	u32 flow = 0, afc_cfg;
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	bool tx_pause, rx_pause;
+
+	int ret = smsc95xx_read_reg(dev, AFC_CFG, &afc_cfg);
+	if (ret < 0)
+		return ret;
+
+	if (pdata->phydev->duplex == DUPLEX_FULL) {
+		phy_get_pause(pdata->phydev, &tx_pause, &rx_pause);
+
+		if (rx_pause)
+			flow = 0xFFFF0002;
+
+		if (tx_pause) {
+			afc_cfg |= 0xF;
+			flow |= 0xFFFF0000;
+		} else {
+			afc_cfg &= ~0xF;
+		}
+
+		netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n",
+			  rx_pause ? "enabled" : "disabled",
+			  tx_pause ? "enabled" : "disabled");
+	} else {
+		netif_dbg(dev, link, dev->net, "half duplex\n");
+		afc_cfg |= 0xF;
+	}
+
+	ret = smsc95xx_write_reg(dev, FLOW, flow);
+	if (ret < 0)
+		return ret;
+
+	return smsc95xx_write_reg(dev, AFC_CFG, afc_cfg);
+}
+
+static void smsc95xx_mac_update_fullduplex(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+	if (pdata->phydev->duplex != DUPLEX_FULL) {
+		pdata->mac_cr &= ~MAC_CR_FDPX_;
+		pdata->mac_cr |= MAC_CR_RCVOWN_;
+	} else {
+		pdata->mac_cr &= ~MAC_CR_RCVOWN_;
+		pdata->mac_cr |= MAC_CR_FDPX_;
+	}
+	spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+	ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+	if (ret < 0) {
+		if (ret != -ENODEV)
+			netdev_warn(dev->net,
+				    "Error updating MAC full duplex mode\n");
+		return;
+	}
+
+	ret = smsc95xx_phy_update_flowcontrol(dev);
+	if (ret < 0)
+		netdev_warn(dev->net, "Error updating PHY flow control\n");
+}
+
+static void smsc95xx_status(struct usbnet *dev, struct urb *urb)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	unsigned long flags;
+	u32 intdata;
+
+	if (urb->actual_length != 4) {
+		netdev_warn(dev->net, "unexpected urb length %d\n",
+			    urb->actual_length);
+		return;
+	}
+
+	intdata = get_unaligned_le32(urb->transfer_buffer);
+	netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata);
+
+	local_irq_save(flags);
+
+	if (intdata & INT_ENP_PHY_INT_)
+		generic_handle_domain_irq(pdata->irqdomain, PHY_HWIRQ);
+	else
+		netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n",
+			    intdata);
+
+	local_irq_restore(flags);
+}
+
+/* Enable or disable Tx & Rx checksum offload engines */
+static int smsc95xx_set_features(struct net_device *netdev,
+	netdev_features_t features)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u32 read_buf;
+	int ret;
+
+	ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	if (features & NETIF_F_IP_CSUM)
+		read_buf |= Tx_COE_EN_;
+	else
+		read_buf &= ~Tx_COE_EN_;
+
+	if (features & NETIF_F_RXCSUM)
+		read_buf |= Rx_COE_EN_;
+	else
+		read_buf &= ~Rx_COE_EN_;
+
+	ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, hw, dev->net, "COE_CR = 0x%08x\n", read_buf);
+	return 0;
+}
+
+static int smsc95xx_ethtool_get_eeprom_len(struct net_device *net)
+{
+	return MAX_EEPROM_SIZE;
+}
+
+static int smsc95xx_ethtool_get_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	ee->magic = LAN95XX_EEPROM_MAGIC;
+
+	return smsc95xx_read_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc95xx_ethtool_set_eeprom(struct net_device *netdev,
+				       struct ethtool_eeprom *ee, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	if (ee->magic != LAN95XX_EEPROM_MAGIC) {
+		netdev_warn(dev->net, "EEPROM: magic value mismatch, magic = 0x%x\n",
+			    ee->magic);
+		return -EINVAL;
+	}
+
+	return smsc95xx_write_eeprom(dev, ee->offset, ee->len, data);
+}
+
+static int smsc95xx_ethtool_getregslen(struct net_device *netdev)
+{
+	/* all smsc95xx registers */
+	return COE_CR - ID_REV + sizeof(u32);
+}
+
+static void
+smsc95xx_ethtool_getregs(struct net_device *netdev, struct ethtool_regs *regs,
+			 void *buf)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	unsigned int i, j;
+	int retval;
+	u32 *data = buf;
+
+	retval = smsc95xx_read_reg(dev, ID_REV, &regs->version);
+	if (retval < 0) {
+		netdev_warn(netdev, "REGS: cannot read ID_REV\n");
+		return;
+	}
+
+	for (i = ID_REV, j = 0; i <= COE_CR; i += (sizeof(u32)), j++) {
+		retval = smsc95xx_read_reg(dev, i, &data[j]);
+		if (retval < 0) {
+			netdev_warn(netdev, "REGS: cannot read reg[%x]\n", i);
+			return;
+		}
+	}
+}
+
+static void smsc95xx_ethtool_get_wol(struct net_device *net,
+				     struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+
+	wolinfo->supported = SUPPORTED_WAKE;
+	wolinfo->wolopts = pdata->wolopts;
+}
+
+static int smsc95xx_ethtool_set_wol(struct net_device *net,
+				    struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	int ret;
+
+	if (wolinfo->wolopts & ~SUPPORTED_WAKE)
+		return -EINVAL;
+
+	pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE;
+
+	ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts);
+	if (ret < 0)
+		netdev_warn(dev->net, "device_set_wakeup_enable error %d\n", ret);
+
+	return ret;
+}
+
+static u32 smsc95xx_get_link(struct net_device *net)
+{
+	phy_read_status(net->phydev);
+	return net->phydev->link;
+}
+
+static void smsc95xx_ethtool_get_strings(struct net_device *netdev, u32 sset,
+					u8 *data)
+{
+	switch (sset) {
+	case ETH_SS_TEST:
+		net_selftest_get_strings(data);
+		break;
+	}
+}
+
+static int smsc95xx_ethtool_get_sset_count(struct net_device *ndev, int sset)
+{
+	switch (sset) {
+	case ETH_SS_TEST:
+		return net_selftest_get_count();
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct ethtool_ops smsc95xx_ethtool_ops = {
+	.get_link	= smsc95xx_get_link,
+	.nway_reset	= phy_ethtool_nway_reset,
+	.get_drvinfo	= usbnet_get_drvinfo,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_eeprom_len	= smsc95xx_ethtool_get_eeprom_len,
+	.get_eeprom	= smsc95xx_ethtool_get_eeprom,
+	.set_eeprom	= smsc95xx_ethtool_set_eeprom,
+	.get_regs_len	= smsc95xx_ethtool_getregslen,
+	.get_regs	= smsc95xx_ethtool_getregs,
+	.get_wol	= smsc95xx_ethtool_get_wol,
+	.set_wol	= smsc95xx_ethtool_set_wol,
+	.get_link_ksettings	= phy_ethtool_get_link_ksettings,
+	.set_link_ksettings	= phy_ethtool_set_link_ksettings,
+	.get_ts_info	= ethtool_op_get_ts_info,
+	.self_test	= net_selftest,
+	.get_strings	= smsc95xx_ethtool_get_strings,
+	.get_sset_count	= smsc95xx_ethtool_get_sset_count,
+};
+
+static int smsc95xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	if (!netif_running(netdev))
+		return -EINVAL;
+
+	return phy_mii_ioctl(netdev->phydev, rq, cmd);
+}
+
+static void smsc95xx_init_mac_address(struct usbnet *dev)
+{
+	u8 addr[ETH_ALEN];
+
+	/* maybe the boot loader passed the MAC address in devicetree */
+	if (!platform_get_ethdev_address(&dev->udev->dev, dev->net)) {
+		if (is_valid_ether_addr(dev->net->dev_addr)) {
+			/* device tree values are valid so use them */
+			netif_dbg(dev, ifup, dev->net, "MAC address read from the device tree\n");
+			return;
+		}
+	}
+
+	/* try reading mac address from EEPROM */
+	if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, addr) == 0) {
+		eth_hw_addr_set(dev->net, addr);
+		if (is_valid_ether_addr(dev->net->dev_addr)) {
+			/* eeprom values are valid so use them */
+			netif_dbg(dev, ifup, dev->net, "MAC address read from EEPROM\n");
+			return;
+		}
+	}
+
+	/* no useful static MAC address found. generate a random one */
+	eth_hw_addr_random(dev->net);
+	netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
+}
+
+static int smsc95xx_set_mac_address(struct usbnet *dev)
+{
+	u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
+		dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
+	u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
+	int ret;
+
+	ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
+	if (ret < 0)
+		return ret;
+
+	return smsc95xx_write_reg(dev, ADDRH, addr_hi);
+}
+
+/* starts the TX path */
+static int smsc95xx_start_tx_path(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	unsigned long flags;
+	int ret;
+
+	/* Enable Tx at MAC */
+	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+	pdata->mac_cr |= MAC_CR_TXEN_;
+	spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+	ret = smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Tx at SCSRs */
+	return smsc95xx_write_reg(dev, TX_CFG, TX_CFG_ON_);
+}
+
+/* Starts the Receive path */
+static int smsc95xx_start_rx_path(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdata->mac_cr_lock, flags);
+	pdata->mac_cr |= MAC_CR_RXEN_;
+	spin_unlock_irqrestore(&pdata->mac_cr_lock, flags);
+
+	return smsc95xx_write_reg(dev, MAC_CR, pdata->mac_cr);
+}
+
+static int smsc95xx_reset(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	u32 read_buf, write_buf, burst_cap;
+	int ret = 0, timeout;
+
+	netif_dbg(dev, ifup, dev->net, "entering smsc95xx_reset\n");
+
+	ret = smsc95xx_write_reg(dev, HW_CFG, HW_CFG_LRST_);
+	if (ret < 0)
+		return ret;
+
+	timeout = 0;
+	do {
+		msleep(10);
+		ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+		if (ret < 0)
+			return ret;
+		timeout++;
+	} while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
+
+	if (timeout >= 100) {
+		netdev_warn(dev->net, "timeout waiting for completion of Lite Reset\n");
+		return -ETIMEDOUT;
+	}
+
+	ret = smsc95xx_set_mac_address(dev);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n",
+		  dev->net->dev_addr);
+
+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n",
+		  read_buf);
+
+	read_buf |= HW_CFG_BIR_;
+
+	ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from HW_CFG after writing HW_CFG_BIR_: 0x%08x\n",
+		  read_buf);
+
+	if (!turbo_mode) {
+		burst_cap = 0;
+		dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
+	} else if (dev->udev->speed == USB_SPEED_HIGH) {
+		burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
+	} else {
+		burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
+		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n",
+		  (ulong)dev->rx_urb_size);
+
+	ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BURST_CAP after writing: 0x%08x\n",
+		  read_buf);
+
+	ret = smsc95xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from BULK_IN_DLY after writing: 0x%08x\n",
+		  read_buf);
+
+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG: 0x%08x\n",
+		  read_buf);
+
+	if (turbo_mode)
+		read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
+
+	read_buf &= ~HW_CFG_RXDOFF_;
+
+	/* set Rx data offset=2, Make IP header aligns on word boundary. */
+	read_buf |= NET_IP_ALIGN << 9;
+
+	ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	netif_dbg(dev, ifup, dev->net,
+		  "Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
+
+	ret = smsc95xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL_);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
+	if (ret < 0)
+		return ret;
+	netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", read_buf);
+
+	/* Configure GPIO pins as LED outputs */
+	write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
+		LED_GPIO_CFG_FDX_LED;
+	ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
+	if (ret < 0)
+		return ret;
+
+	/* Init Tx */
+	ret = smsc95xx_write_reg(dev, FLOW, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_write_reg(dev, AFC_CFG, AFC_CFG_DEFAULT);
+	if (ret < 0)
+		return ret;
+
+	/* Don't need mac_cr_lock during initialisation */
+	ret = smsc95xx_read_reg(dev, MAC_CR, &pdata->mac_cr);
+	if (ret < 0)
+		return ret;
+
+	/* Init Rx */
+	/* Set Vlan */
+	ret = smsc95xx_write_reg(dev, VLAN1, (u32)ETH_P_8021Q);
+	if (ret < 0)
+		return ret;
+
+	/* Enable or disable checksum offload engines */
+	ret = smsc95xx_set_features(dev->net, dev->net->features);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to set checksum offload features\n");
+		return ret;
+	}
+
+	smsc95xx_set_multicast(dev->net);
+
+	ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
+	if (ret < 0)
+		return ret;
+
+	/* enable PHY interrupts */
+	read_buf |= INT_EP_CTL_PHY_INT_;
+
+	ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_start_tx_path(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to start TX path\n");
+		return ret;
+	}
+
+	ret = smsc95xx_start_rx_path(dev);
+	if (ret < 0) {
+		netdev_warn(dev->net, "Failed to start RX path\n");
+		return ret;
+	}
+
+	netif_dbg(dev, ifup, dev->net, "smsc95xx_reset, return 0\n");
+	return 0;
+}
+
+static const struct net_device_ops smsc95xx_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= smsc95xx_ioctl,
+	.ndo_set_rx_mode	= smsc95xx_set_multicast,
+	.ndo_set_features	= smsc95xx_set_features,
+};
+
+static void smsc95xx_handle_link_change(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	phy_print_status(net->phydev);
+	smsc95xx_mac_update_fullduplex(dev);
+	usbnet_defer_kevent(dev, EVENT_LINK_CHANGE);
+}
+
+static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc95xx_priv *pdata;
+	char usb_path[64];
+	int ret, phy_irq;
+	u32 val;
+
+	printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret < 0) {
+		netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret);
+		return ret;
+	}
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+
+	dev->driver_priv = pdata;
+
+	spin_lock_init(&pdata->mac_cr_lock);
+
+	/* LAN95xx devices do not alter the computed checksum of 0 to 0xffff.
+	 * RFC 2460, ipv6 UDP calculated checksum yields a result of zero must
+	 * be changed to 0xffff. RFC 768, ipv4 UDP computed checksum is zero,
+	 * it is transmitted as all ones. The zero transmitted checksum means
+	 * transmitter generated no checksum. Hence, enable csum offload only
+	 * for ipv4 packets.
+	 */
+	if (DEFAULT_TX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_IP_CSUM;
+	if (DEFAULT_RX_CSUM_ENABLE)
+		dev->net->features |= NETIF_F_RXCSUM;
+
+	dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
+	set_bit(EVENT_NO_IP_ALIGN, &dev->flags);
+
+	smsc95xx_init_mac_address(dev);
+
+	/* Init all registers */
+	ret = smsc95xx_reset(dev);
+	if (ret)
+		goto free_pdata;
+
+	/* create irq domain for use by PHY driver and GPIO consumers */
+	usb_make_path(dev->udev, usb_path, sizeof(usb_path));
+	pdata->irqfwnode = irq_domain_alloc_named_fwnode(usb_path);
+	if (!pdata->irqfwnode) {
+		ret = -ENOMEM;
+		goto free_pdata;
+	}
+
+	pdata->irqdomain = irq_domain_create_linear(pdata->irqfwnode,
+						    SMSC95XX_NR_IRQS,
+						    &irq_domain_simple_ops,
+						    pdata);
+	if (!pdata->irqdomain) {
+		ret = -ENOMEM;
+		goto free_irqfwnode;
+	}
+
+	phy_irq = irq_create_mapping(pdata->irqdomain, PHY_HWIRQ);
+	if (!phy_irq) {
+		ret = -ENOENT;
+		goto remove_irqdomain;
+	}
+
+	pdata->irqchip = dummy_irq_chip;
+	pdata->irqchip.name = SMSC_CHIPNAME;
+	irq_set_chip_and_handler_name(phy_irq, &pdata->irqchip,
+				      handle_simple_irq, "phy");
+
+	pdata->mdiobus = mdiobus_alloc();
+	if (!pdata->mdiobus) {
+		ret = -ENOMEM;
+		goto dispose_irq;
+	}
+
+	ret = smsc95xx_read_reg(dev, HW_CFG, &val);
+	if (ret < 0)
+		goto free_mdio;
+
+	pdata->is_internal_phy = !(val & HW_CFG_PSEL_);
+	if (pdata->is_internal_phy)
+		pdata->mdiobus->phy_mask = ~(1u << SMSC95XX_INTERNAL_PHY_ID);
+
+	pdata->mdiobus->priv = dev;
+	pdata->mdiobus->read = smsc95xx_mdiobus_read;
+	pdata->mdiobus->write = smsc95xx_mdiobus_write;
+	pdata->mdiobus->reset = smsc95xx_mdiobus_reset;
+	pdata->mdiobus->name = "smsc95xx-mdiobus";
+	pdata->mdiobus->parent = &dev->udev->dev;
+
+	snprintf(pdata->mdiobus->id, ARRAY_SIZE(pdata->mdiobus->id),
+		 "usb-%03d:%03d", dev->udev->bus->busnum, dev->udev->devnum);
+
+	ret = mdiobus_register(pdata->mdiobus);
+	if (ret) {
+		netdev_err(dev->net, "Could not register MDIO bus\n");
+		goto free_mdio;
+	}
+
+	pdata->phydev = phy_find_first(pdata->mdiobus);
+	if (!pdata->phydev) {
+		netdev_err(dev->net, "no PHY found\n");
+		ret = -ENODEV;
+		goto unregister_mdio;
+	}
+
+	pdata->phydev->irq = phy_irq;
+	pdata->phydev->is_internal = pdata->is_internal_phy;
+
+	/* detect device revision as different features may be available */
+	ret = smsc95xx_read_reg(dev, ID_REV, &val);
+	if (ret < 0)
+		goto unregister_mdio;
+
+	val >>= 16;
+	if ((val == ID_REV_CHIP_ID_9500A_) || (val == ID_REV_CHIP_ID_9530_) ||
+	    (val == ID_REV_CHIP_ID_89530_) || (val == ID_REV_CHIP_ID_9730_))
+		pdata->features = (FEATURE_8_WAKEUP_FILTERS |
+			FEATURE_PHY_NLP_CROSSOVER |
+			FEATURE_REMOTE_WAKEUP);
+	else if (val == ID_REV_CHIP_ID_9512_)
+		pdata->features = FEATURE_8_WAKEUP_FILTERS;
+
+	dev->net->netdev_ops = &smsc95xx_netdev_ops;
+	dev->net->ethtool_ops = &smsc95xx_ethtool_ops;
+	dev->net->flags |= IFF_MULTICAST;
+	dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
+	dev->net->min_mtu = ETH_MIN_MTU;
+	dev->net->max_mtu = ETH_DATA_LEN;
+	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+	ret = phy_connect_direct(dev->net, pdata->phydev,
+				 &smsc95xx_handle_link_change,
+				 PHY_INTERFACE_MODE_MII);
+	if (ret) {
+		netdev_err(dev->net, "can't attach PHY to %s\n", pdata->mdiobus->id);
+		goto unregister_mdio;
+	}
+
+	phy_attached_info(dev->net->phydev);
+
+	return 0;
+
+unregister_mdio:
+	mdiobus_unregister(pdata->mdiobus);
+
+free_mdio:
+	mdiobus_free(pdata->mdiobus);
+
+dispose_irq:
+	irq_dispose_mapping(phy_irq);
+
+remove_irqdomain:
+	irq_domain_remove(pdata->irqdomain);
+
+free_irqfwnode:
+	irq_domain_free_fwnode(pdata->irqfwnode);
+
+free_pdata:
+	kfree(pdata);
+	return ret;
+}
+
+static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+
+	phy_disconnect(dev->net->phydev);
+	mdiobus_unregister(pdata->mdiobus);
+	mdiobus_free(pdata->mdiobus);
+	irq_dispose_mapping(irq_find_mapping(pdata->irqdomain, PHY_HWIRQ));
+	irq_domain_remove(pdata->irqdomain);
+	irq_domain_free_fwnode(pdata->irqfwnode);
+	netif_dbg(dev, ifdown, dev->net, "free pdata\n");
+	kfree(pdata);
+}
+
+static int smsc95xx_start_phy(struct usbnet *dev)
+{
+	phy_start(dev->net->phydev);
+
+	return 0;
+}
+
+static int smsc95xx_stop(struct usbnet *dev)
+{
+	phy_stop(dev->net->phydev);
+
+	return 0;
+}
+
+static u32 smsc_crc(const u8 *buffer, size_t len, int filter)
+{
+	u32 crc = bitrev16(crc16(0xFFFF, buffer, len));
+	return crc << ((filter % 2) * 16);
+}
+
+static int smsc95xx_link_ok(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	int ret;
+
+	/* first, a dummy read, needed to latch some MII phys */
+	ret = smsc95xx_mdio_read(dev, pdata->phydev->mdio.addr, MII_BMSR);
+	if (ret < 0)
+		return ret;
+
+	ret = smsc95xx_mdio_read(dev, pdata->phydev->mdio.addr, MII_BMSR);
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & BMSR_LSTATUS);
+}
+
+static int smsc95xx_enter_suspend0(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	u32 val;
+	int ret;
+
+	ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= (~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_));
+	val |= PM_CTL_SUS_MODE_0;
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	/* clear wol status */
+	val &= ~PM_CTL_WUPS_;
+	val |= PM_CTL_WUPS_WOL_;
+
+	/* enable energy detection */
+	if (pdata->wolopts & WAKE_PHY)
+		val |= PM_CTL_WUPS_ED_;
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	/* read back PM_CTRL */
+	ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND0;
+
+	return 0;
+}
+
+static int smsc95xx_enter_suspend1(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	int ret, phy_id = pdata->phydev->mdio.addr;
+	u32 val;
+
+	/* reconfigure link pulse detection timing for
+	 * compatibility with non-standard link partners
+	 */
+	if (pdata->features & FEATURE_PHY_NLP_CROSSOVER)
+		smsc95xx_mdio_write(dev, phy_id, PHY_EDPD_CONFIG,
+				    PHY_EDPD_CONFIG_DEFAULT);
+
+	/* enable energy detect power-down mode */
+	ret = smsc95xx_mdio_read(dev, phy_id, PHY_MODE_CTRL_STS);
+	if (ret < 0)
+		return ret;
+
+	ret |= MODE_CTRL_STS_EDPWRDOWN_;
+
+	smsc95xx_mdio_write(dev, phy_id, PHY_MODE_CTRL_STS, ret);
+
+	/* enter SUSPEND1 mode */
+	ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+	val |= PM_CTL_SUS_MODE_1;
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	/* clear wol status, enable energy detection */
+	val &= ~PM_CTL_WUPS_;
+	val |= (PM_CTL_WUPS_ED_ | PM_CTL_ED_EN_);
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND1;
+
+	return 0;
+}
+
+static int smsc95xx_enter_suspend2(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	u32 val;
+	int ret;
+
+	ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+	val |= PM_CTL_SUS_MODE_2;
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND2;
+
+	return 0;
+}
+
+static int smsc95xx_enter_suspend3(struct usbnet *dev)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	u32 val;
+	int ret;
+
+	ret = smsc95xx_read_reg(dev, RX_FIFO_INF, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val & RX_FIFO_INF_USED_) {
+		netdev_info(dev->net, "rx fifo not empty in autosuspend\n");
+		return -EBUSY;
+	}
+
+	ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= ~(PM_CTL_SUS_MODE_ | PM_CTL_WUPS_ | PM_CTL_PHY_RST_);
+	val |= PM_CTL_SUS_MODE_3 | PM_CTL_RES_CLR_WKP_STS;
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	/* clear wol status */
+	val &= ~PM_CTL_WUPS_;
+	val |= PM_CTL_WUPS_WOL_;
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+	if (ret < 0)
+		return ret;
+
+	pdata->suspend_flags |= SUSPEND_SUSPEND3;
+
+	return 0;
+}
+
+static int smsc95xx_autosuspend(struct usbnet *dev, u32 link_up)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+
+	if (!netif_running(dev->net)) {
+		/* interface is ifconfig down so fully power down hw */
+		netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n");
+		return smsc95xx_enter_suspend2(dev);
+	}
+
+	if (!link_up) {
+		/* link is down so enter EDPD mode, but only if device can
+		 * reliably resume from it.  This check should be redundant
+		 * as current FEATURE_REMOTE_WAKEUP parts also support
+		 * FEATURE_PHY_NLP_CROSSOVER but it's included for clarity */
+		if (!(pdata->features & FEATURE_PHY_NLP_CROSSOVER)) {
+			netdev_warn(dev->net, "EDPD not supported\n");
+			return -EBUSY;
+		}
+
+		netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n");
+		netdev_info(dev->net, "entering SUSPEND1 mode\n");
+		return smsc95xx_enter_suspend1(dev);
+	}
+
+	netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n");
+	return smsc95xx_enter_suspend3(dev);
+}
+
+static int smsc95xx_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	u32 val, link_up;
+	int ret;
+
+	pdata->pm_task = current;
+
+	ret = usbnet_suspend(intf, message);
+	if (ret < 0) {
+		netdev_warn(dev->net, "usbnet_suspend error\n");
+		pdata->pm_task = NULL;
+		return ret;
+	}
+
+	if (pdata->suspend_flags) {
+		netdev_warn(dev->net, "error during last resume\n");
+		pdata->suspend_flags = 0;
+	}
+
+	link_up = smsc95xx_link_ok(dev);
+
+	if (message.event == PM_EVENT_AUTO_SUSPEND &&
+	    (pdata->features & FEATURE_REMOTE_WAKEUP)) {
+		ret = smsc95xx_autosuspend(dev, link_up);
+		goto done;
+	}
+
+	/* if we get this far we're not autosuspending */
+	/* if no wol options set, or if link is down and we're not waking on
+	 * PHY activity, enter lowest power SUSPEND2 mode
+	 */
+	if (!(pdata->wolopts & SUPPORTED_WAKE) ||
+		!(link_up || (pdata->wolopts & WAKE_PHY))) {
+		netdev_info(dev->net, "entering SUSPEND2 mode\n");
+
+		/* disable energy detect (link up) & wake up events */
+		ret = smsc95xx_read_reg(dev, WUCSR, &val);
+		if (ret < 0)
+			goto done;
+
+		val &= ~(WUCSR_MPEN_ | WUCSR_WAKE_EN_);
+
+		ret = smsc95xx_write_reg(dev, WUCSR, val);
+		if (ret < 0)
+			goto done;
+
+		ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+		if (ret < 0)
+			goto done;
+
+		val &= ~(PM_CTL_ED_EN_ | PM_CTL_WOL_EN_);
+
+		ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+		if (ret < 0)
+			goto done;
+
+		ret = smsc95xx_enter_suspend2(dev);
+		goto done;
+	}
+
+	if (pdata->wolopts & WAKE_PHY) {
+		/* if link is down then configure EDPD and enter SUSPEND1,
+		 * otherwise enter SUSPEND0 below
+		 */
+		if (!link_up) {
+			netdev_info(dev->net, "entering SUSPEND1 mode\n");
+			ret = smsc95xx_enter_suspend1(dev);
+			goto done;
+		}
+	}
+
+	if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
+		u32 *filter_mask = kcalloc(32, sizeof(u32), GFP_KERNEL);
+		u32 command[2];
+		u32 offset[2];
+		u32 crc[4];
+		int wuff_filter_count =
+			(pdata->features & FEATURE_8_WAKEUP_FILTERS) ?
+			LAN9500A_WUFF_NUM : LAN9500_WUFF_NUM;
+		int i, filter = 0;
+
+		if (!filter_mask) {
+			netdev_warn(dev->net, "Unable to allocate filter_mask\n");
+			ret = -ENOMEM;
+			goto done;
+		}
+
+		memset(command, 0, sizeof(command));
+		memset(offset, 0, sizeof(offset));
+		memset(crc, 0, sizeof(crc));
+
+		if (pdata->wolopts & WAKE_BCAST) {
+			const u8 bcast[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+			netdev_info(dev->net, "enabling broadcast detection\n");
+			filter_mask[filter * 4] = 0x003F;
+			filter_mask[filter * 4 + 1] = 0x00;
+			filter_mask[filter * 4 + 2] = 0x00;
+			filter_mask[filter * 4 + 3] = 0x00;
+			command[filter/4] |= 0x05UL << ((filter % 4) * 8);
+			offset[filter/4] |= 0x00 << ((filter % 4) * 8);
+			crc[filter/2] |= smsc_crc(bcast, 6, filter);
+			filter++;
+		}
+
+		if (pdata->wolopts & WAKE_MCAST) {
+			const u8 mcast[] = {0x01, 0x00, 0x5E};
+			netdev_info(dev->net, "enabling multicast detection\n");
+			filter_mask[filter * 4] = 0x0007;
+			filter_mask[filter * 4 + 1] = 0x00;
+			filter_mask[filter * 4 + 2] = 0x00;
+			filter_mask[filter * 4 + 3] = 0x00;
+			command[filter/4] |= 0x09UL << ((filter % 4) * 8);
+			offset[filter/4] |= 0x00  << ((filter % 4) * 8);
+			crc[filter/2] |= smsc_crc(mcast, 3, filter);
+			filter++;
+		}
+
+		if (pdata->wolopts & WAKE_ARP) {
+			const u8 arp[] = {0x08, 0x06};
+			netdev_info(dev->net, "enabling ARP detection\n");
+			filter_mask[filter * 4] = 0x0003;
+			filter_mask[filter * 4 + 1] = 0x00;
+			filter_mask[filter * 4 + 2] = 0x00;
+			filter_mask[filter * 4 + 3] = 0x00;
+			command[filter/4] |= 0x05UL << ((filter % 4) * 8);
+			offset[filter/4] |= 0x0C << ((filter % 4) * 8);
+			crc[filter/2] |= smsc_crc(arp, 2, filter);
+			filter++;
+		}
+
+		if (pdata->wolopts & WAKE_UCAST) {
+			netdev_info(dev->net, "enabling unicast detection\n");
+			filter_mask[filter * 4] = 0x003F;
+			filter_mask[filter * 4 + 1] = 0x00;
+			filter_mask[filter * 4 + 2] = 0x00;
+			filter_mask[filter * 4 + 3] = 0x00;
+			command[filter/4] |= 0x01UL << ((filter % 4) * 8);
+			offset[filter/4] |= 0x00 << ((filter % 4) * 8);
+			crc[filter/2] |= smsc_crc(dev->net->dev_addr, ETH_ALEN, filter);
+			filter++;
+		}
+
+		for (i = 0; i < (wuff_filter_count * 4); i++) {
+			ret = smsc95xx_write_reg(dev, WUFF, filter_mask[i]);
+			if (ret < 0) {
+				kfree(filter_mask);
+				goto done;
+			}
+		}
+		kfree(filter_mask);
+
+		for (i = 0; i < (wuff_filter_count / 4); i++) {
+			ret = smsc95xx_write_reg(dev, WUFF, command[i]);
+			if (ret < 0)
+				goto done;
+		}
+
+		for (i = 0; i < (wuff_filter_count / 4); i++) {
+			ret = smsc95xx_write_reg(dev, WUFF, offset[i]);
+			if (ret < 0)
+				goto done;
+		}
+
+		for (i = 0; i < (wuff_filter_count / 2); i++) {
+			ret = smsc95xx_write_reg(dev, WUFF, crc[i]);
+			if (ret < 0)
+				goto done;
+		}
+
+		/* clear any pending pattern match packet status */
+		ret = smsc95xx_read_reg(dev, WUCSR, &val);
+		if (ret < 0)
+			goto done;
+
+		val |= WUCSR_WUFR_;
+
+		ret = smsc95xx_write_reg(dev, WUCSR, val);
+		if (ret < 0)
+			goto done;
+	}
+
+	if (pdata->wolopts & WAKE_MAGIC) {
+		/* clear any pending magic packet status */
+		ret = smsc95xx_read_reg(dev, WUCSR, &val);
+		if (ret < 0)
+			goto done;
+
+		val |= WUCSR_MPR_;
+
+		ret = smsc95xx_write_reg(dev, WUCSR, val);
+		if (ret < 0)
+			goto done;
+	}
+
+	/* enable/disable wakeup sources */
+	ret = smsc95xx_read_reg(dev, WUCSR, &val);
+	if (ret < 0)
+		goto done;
+
+	if (pdata->wolopts & (WAKE_BCAST | WAKE_MCAST | WAKE_ARP | WAKE_UCAST)) {
+		netdev_info(dev->net, "enabling pattern match wakeup\n");
+		val |= WUCSR_WAKE_EN_;
+	} else {
+		netdev_info(dev->net, "disabling pattern match wakeup\n");
+		val &= ~WUCSR_WAKE_EN_;
+	}
+
+	if (pdata->wolopts & WAKE_MAGIC) {
+		netdev_info(dev->net, "enabling magic packet wakeup\n");
+		val |= WUCSR_MPEN_;
+	} else {
+		netdev_info(dev->net, "disabling magic packet wakeup\n");
+		val &= ~WUCSR_MPEN_;
+	}
+
+	ret = smsc95xx_write_reg(dev, WUCSR, val);
+	if (ret < 0)
+		goto done;
+
+	/* enable wol wakeup source */
+	ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+	if (ret < 0)
+		goto done;
+
+	val |= PM_CTL_WOL_EN_;
+
+	/* phy energy detect wakeup source */
+	if (pdata->wolopts & WAKE_PHY)
+		val |= PM_CTL_ED_EN_;
+
+	ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+	if (ret < 0)
+		goto done;
+
+	/* enable receiver to enable frame reception */
+	smsc95xx_start_rx_path(dev);
+
+	/* some wol options are enabled, so enter SUSPEND0 */
+	netdev_info(dev->net, "entering SUSPEND0 mode\n");
+	ret = smsc95xx_enter_suspend0(dev);
+
+done:
+	/*
+	 * TODO: resume() might need to handle the suspend failure
+	 * in system sleep
+	 */
+	if (ret && PMSG_IS_AUTO(message))
+		usbnet_resume(intf);
+
+	pdata->pm_task = NULL;
+	return ret;
+}
+
+static int smsc95xx_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc95xx_priv *pdata;
+	u8 suspend_flags;
+	int ret;
+	u32 val;
+
+	BUG_ON(!dev);
+	pdata = dev->driver_priv;
+	suspend_flags = pdata->suspend_flags;
+
+	netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags);
+
+	/* do this first to ensure it's cleared even in error case */
+	pdata->suspend_flags = 0;
+
+	pdata->pm_task = current;
+
+	if (suspend_flags & SUSPEND_ALLMODES) {
+		/* clear wake-up sources */
+		ret = smsc95xx_read_reg(dev, WUCSR, &val);
+		if (ret < 0)
+			goto done;
+
+		val &= ~(WUCSR_WAKE_EN_ | WUCSR_MPEN_);
+
+		ret = smsc95xx_write_reg(dev, WUCSR, val);
+		if (ret < 0)
+			goto done;
+
+		/* clear wake-up status */
+		ret = smsc95xx_read_reg(dev, PM_CTRL, &val);
+		if (ret < 0)
+			goto done;
+
+		val &= ~PM_CTL_WOL_EN_;
+		val |= PM_CTL_WUPS_;
+
+		ret = smsc95xx_write_reg(dev, PM_CTRL, val);
+		if (ret < 0)
+			goto done;
+	}
+
+	phy_init_hw(pdata->phydev);
+
+	ret = usbnet_resume(intf);
+	if (ret < 0)
+		netdev_warn(dev->net, "usbnet_resume error\n");
+
+done:
+	pdata->pm_task = NULL;
+	return ret;
+}
+
+static int smsc95xx_reset_resume(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+	int ret;
+
+	pdata->pm_task = current;
+	ret = smsc95xx_reset(dev);
+	pdata->pm_task = NULL;
+	if (ret < 0)
+		return ret;
+
+	return smsc95xx_resume(intf);
+}
+
+static void smsc95xx_rx_csum_offload(struct sk_buff *skb)
+{
+	skb->csum = *(u16 *)(skb_tail_pointer(skb) - 2);
+	skb->ip_summed = CHECKSUM_COMPLETE;
+	skb_trim(skb, skb->len - 2);
+}
+
+static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	while (skb->len > 0) {
+		u32 header, align_count;
+		struct sk_buff *ax_skb;
+		unsigned char *packet;
+		u16 size;
+
+		header = get_unaligned_le32(skb->data);
+		skb_pull(skb, 4 + NET_IP_ALIGN);
+		packet = skb->data;
+
+		/* get the packet length */
+		size = (u16)((header & RX_STS_FL_) >> 16);
+		align_count = (4 - ((size + NET_IP_ALIGN) % 4)) % 4;
+
+		if (unlikely(size > skb->len)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "size err header=0x%08x\n", header);
+			return 0;
+		}
+
+		if (unlikely(header & RX_STS_ES_)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "Error header=0x%08x\n", header);
+			dev->net->stats.rx_errors++;
+			dev->net->stats.rx_dropped++;
+
+			if (header & RX_STS_CRC_) {
+				dev->net->stats.rx_crc_errors++;
+			} else {
+				if (header & (RX_STS_TL_ | RX_STS_RF_))
+					dev->net->stats.rx_frame_errors++;
+
+				if ((header & RX_STS_LE_) &&
+					(!(header & RX_STS_FT_)))
+					dev->net->stats.rx_length_errors++;
+			}
+		} else {
+			/* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */
+			if (unlikely(size > (ETH_FRAME_LEN + 12))) {
+				netif_dbg(dev, rx_err, dev->net,
+					  "size err header=0x%08x\n", header);
+				return 0;
+			}
+
+			/* last frame in this batch */
+			if (skb->len == size) {
+				if (dev->net->features & NETIF_F_RXCSUM)
+					smsc95xx_rx_csum_offload(skb);
+				skb_trim(skb, skb->len - 4); /* remove fcs */
+				skb->truesize = size + sizeof(struct sk_buff);
+
+				return 1;
+			}
+
+			ax_skb = skb_clone(skb, GFP_ATOMIC);
+			if (unlikely(!ax_skb)) {
+				netdev_warn(dev->net, "Error allocating skb\n");
+				return 0;
+			}
+
+			ax_skb->len = size;
+			ax_skb->data = packet;
+			skb_set_tail_pointer(ax_skb, size);
+
+			if (dev->net->features & NETIF_F_RXCSUM)
+				smsc95xx_rx_csum_offload(ax_skb);
+			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
+			ax_skb->truesize = size + sizeof(struct sk_buff);
+
+			usbnet_skb_return(dev, ax_skb);
+		}
+
+		skb_pull(skb, size);
+
+		/* padding bytes before the next frame starts */
+		if (skb->len)
+			skb_pull(skb, align_count);
+	}
+
+	return 1;
+}
+
+static u32 smsc95xx_calc_csum_preamble(struct sk_buff *skb)
+{
+	u16 low_16 = (u16)skb_checksum_start_offset(skb);
+	u16 high_16 = low_16 + skb->csum_offset;
+	return (high_16 << 16) | low_16;
+}
+
+/* The TX CSUM won't work if the checksum lies in the last 4 bytes of the
+ * transmission. This is fairly unlikely, only seems to trigger with some
+ * short TCP ACK packets sent.
+ *
+ * Note, this calculation should probably check for the alignment of the
+ * data as well, but a straight check for csum being in the last four bytes
+ * of the packet should be ok for now.
+ */
+static bool smsc95xx_can_tx_checksum(struct sk_buff *skb)
+{
+       unsigned int len = skb->len - skb_checksum_start_offset(skb);
+
+       if (skb->len <= 45)
+	       return false;
+       return skb->csum_offset < (len - (4 + 1));
+}
+
+static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
+					 struct sk_buff *skb, gfp_t flags)
+{
+	bool csum = skb->ip_summed == CHECKSUM_PARTIAL;
+	int overhead = csum ? SMSC95XX_TX_OVERHEAD_CSUM : SMSC95XX_TX_OVERHEAD;
+	u32 tx_cmd_a, tx_cmd_b;
+	void *ptr;
+
+	/* We do not advertise SG, so skbs should be already linearized */
+	BUG_ON(skb_shinfo(skb)->nr_frags);
+
+	/* Make writable and expand header space by overhead if required */
+	if (skb_cow_head(skb, overhead)) {
+		/* Must deallocate here as returning NULL to indicate error
+		 * means the skb won't be deallocated in the caller.
+		 */
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+
+	tx_cmd_b = (u32)skb->len;
+	tx_cmd_a = tx_cmd_b | TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
+
+	if (csum) {
+		if (!smsc95xx_can_tx_checksum(skb)) {
+			/* workaround - hardware tx checksum does not work
+			 * properly with extremely small packets */
+			long csstart = skb_checksum_start_offset(skb);
+			__wsum calc = csum_partial(skb->data + csstart,
+				skb->len - csstart, 0);
+			*((__sum16 *)(skb->data + csstart
+				+ skb->csum_offset)) = csum_fold(calc);
+
+			csum = false;
+		} else {
+			u32 csum_preamble = smsc95xx_calc_csum_preamble(skb);
+			ptr = skb_push(skb, 4);
+			put_unaligned_le32(csum_preamble, ptr);
+
+			tx_cmd_a += 4;
+			tx_cmd_b += 4;
+			tx_cmd_b |= TX_CMD_B_CSUM_ENABLE;
+		}
+	}
+
+	ptr = skb_push(skb, 8);
+	put_unaligned_le32(tx_cmd_a, ptr);
+	put_unaligned_le32(tx_cmd_b, ptr+4);
+
+	return skb;
+}
+
+static int smsc95xx_manage_power(struct usbnet *dev, int on)
+{
+	struct smsc95xx_priv *pdata = dev->driver_priv;
+
+	dev->intf->needs_remote_wakeup = on;
+
+	if (pdata->features & FEATURE_REMOTE_WAKEUP)
+		return 0;
+
+	/* this chip revision isn't capable of remote wakeup */
+	netdev_info(dev->net, "hardware isn't capable of remote wakeup\n");
+
+	if (on)
+		usb_autopm_get_interface_no_resume(dev->intf);
+	else
+		usb_autopm_put_interface(dev->intf);
+
+	return 0;
+}
+
+static const struct driver_info smsc95xx_info = {
+	.description	= "smsc95xx USB 2.0 Ethernet",
+	.bind		= smsc95xx_bind,
+	.unbind		= smsc95xx_unbind,
+	.reset		= smsc95xx_reset,
+	.check_connect	= smsc95xx_start_phy,
+	.stop		= smsc95xx_stop,
+	.rx_fixup	= smsc95xx_rx_fixup,
+	.tx_fixup	= smsc95xx_tx_fixup,
+	.status		= smsc95xx_status,
+	.manage_power	= smsc95xx_manage_power,
+	.flags		= FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		/* SMSC9500 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9500),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9505),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500A USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9E00),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505A USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9E01),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9512/9514 USB Hub & Ethernet Device */
+		USB_DEVICE(0x0424, 0xec00),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500 USB Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9900),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505 USB Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9901),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500A USB Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9902),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505A USB Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9903),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */
+		USB_DEVICE(0x0424, 0x9904),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500A USB Ethernet Device (HAL) */
+		USB_DEVICE(0x0424, 0x9905),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9505A USB Ethernet Device (HAL) */
+		USB_DEVICE(0x0424, 0x9906),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500 USB Ethernet Device (Alternate ID) */
+		USB_DEVICE(0x0424, 0x9907),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9500A USB Ethernet Device (Alternate ID) */
+		USB_DEVICE(0x0424, 0x9908),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */
+		USB_DEVICE(0x0424, 0x9909),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC LAN9530 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9530),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC LAN9730 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9730),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* SMSC LAN89530 USB Ethernet Device */
+		USB_DEVICE(0x0424, 0x9E08),
+		.driver_info = (unsigned long) &smsc95xx_info,
+	},
+	{
+		/* Microchip's EVB-LAN8670-USB 10BASE-T1S Ethernet Device */
+		USB_DEVICE(0x184F, 0x0051),
+		.driver_info = (unsigned long)&smsc95xx_info,
+	},
+	{ },		/* END */
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver smsc95xx_driver = {
+	.name		= "smsc95xx",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.suspend	= smsc95xx_suspend,
+	.resume		= smsc95xx_resume,
+	.reset_resume	= smsc95xx_reset_resume,
+	.disconnect	= usbnet_disconnect,
+	.disable_hub_initiated_lpm = 1,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(smsc95xx_driver);
+
+MODULE_AUTHOR("Nancy Lin");
+MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>");
+MODULE_DESCRIPTION("SMSC95XX USB 2.0 Ethernet Devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/smsc95xx.h b/drivers/net/usb/smsc95xx.h
new file mode 100644
index 000000000..013bf42e2
--- /dev/null
+++ b/drivers/net/usb/smsc95xx.h
@@ -0,0 +1,352 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+ /***************************************************************************
+ *
+ * Copyright (C) 2007-2008 SMSC
+ *
+ *****************************************************************************/
+
+#ifndef _SMSC95XX_H
+#define _SMSC95XX_H
+
+/* Tx command words */
+#define TX_CMD_A_DATA_OFFSET_	(0x001F0000)	/* Data Start Offset */
+#define TX_CMD_A_FIRST_SEG_	(0x00002000)	/* First Segment */
+#define TX_CMD_A_LAST_SEG_	(0x00001000)	/* Last Segment */
+#define TX_CMD_A_BUF_SIZE_	(0x000007FF)	/* Buffer Size */
+
+#define TX_CMD_B_CSUM_ENABLE	(0x00004000)	/* TX Checksum Enable */
+#define TX_CMD_B_ADD_CRC_DIS_	(0x00002000)	/* Add CRC Disable */
+#define TX_CMD_B_DIS_PADDING_	(0x00001000)	/* Disable Frame Padding */
+#define TX_CMD_B_FRAME_LENGTH_	(0x000007FF)	/* Frame Length (bytes) */
+
+/* Rx status word */
+#define RX_STS_FF_		(0x40000000)	/* Filter Fail */
+#define RX_STS_FL_		(0x3FFF0000)	/* Frame Length */
+#define RX_STS_ES_		(0x00008000)	/* Error Summary */
+#define RX_STS_BF_		(0x00002000)	/* Broadcast Frame */
+#define RX_STS_LE_		(0x00001000)	/* Length Error */
+#define RX_STS_RF_		(0x00000800)	/* Runt Frame */
+#define RX_STS_MF_		(0x00000400)	/* Multicast Frame */
+#define RX_STS_TL_		(0x00000080)	/* Frame too long */
+#define RX_STS_CS_		(0x00000040)	/* Collision Seen */
+#define RX_STS_FT_		(0x00000020)	/* Frame Type */
+#define RX_STS_RW_		(0x00000010)	/* Receive Watchdog */
+#define RX_STS_ME_		(0x00000008)	/* MII Error */
+#define RX_STS_DB_		(0x00000004)	/* Dribbling */
+#define RX_STS_CRC_		(0x00000002)	/* CRC Error */
+
+/* SCSRs - System Control and Status Registers */
+/* Device ID and Revision Register */
+#define ID_REV			(0x00)
+#define ID_REV_CHIP_ID_MASK_	(0xFFFF0000)
+#define ID_REV_CHIP_REV_MASK_	(0x0000FFFF)
+#define ID_REV_CHIP_ID_9500_	(0x9500)
+#define ID_REV_CHIP_ID_9500A_	(0x9E00)
+#define ID_REV_CHIP_ID_9512_	(0xEC00)
+#define ID_REV_CHIP_ID_9530_	(0x9530)
+#define ID_REV_CHIP_ID_89530_	(0x9E08)
+#define ID_REV_CHIP_ID_9730_	(0x9730)
+
+/* Interrupt Status Register */
+#define INT_STS			(0x08)
+#define INT_STS_MAC_RTO_	(0x00040000)	/* MAC Reset Time Out */
+#define INT_STS_TX_STOP_	(0x00020000)	/* TX Stopped */
+#define INT_STS_RX_STOP_	(0x00010000)	/* RX Stopped */
+#define INT_STS_PHY_INT_	(0x00008000)	/* PHY Interrupt */
+#define INT_STS_TXE_		(0x00004000)	/* Transmitter Error */
+#define INT_STS_TDFU_		(0x00002000)	/* TX Data FIFO Underrun */
+#define INT_STS_TDFO_		(0x00001000)	/* TX Data FIFO Overrun */
+#define INT_STS_RXDF_		(0x00000800)	/* RX Dropped Frame */
+#define INT_STS_GPIOS_		(0x000007FF)	/* GPIOs Interrupts */
+#define INT_STS_CLEAR_ALL_	(0xFFFFFFFF)
+
+/* Receive Configuration Register */
+#define RX_CFG			(0x0C)
+#define RX_FIFO_FLUSH_		(0x00000001)	/* Receive FIFO Flush */
+
+/* Transmit Configuration Register */
+#define TX_CFG			(0x10)
+#define TX_CFG_ON_		(0x00000004)	/* Transmitter Enable */
+#define TX_CFG_STOP_		(0x00000002)	/* Stop Transmitter */
+#define TX_CFG_FIFO_FLUSH_	(0x00000001)	/* Transmit FIFO Flush */
+
+/* Hardware Configuration Register */
+#define HW_CFG			(0x14)
+#define HW_CFG_BIR_		(0x00001000)	/* Bulk In Empty Response */
+#define HW_CFG_LEDB_		(0x00000800)	/* Activity LED 80ms Bypass */
+#define HW_CFG_RXDOFF_		(0x00000600)	/* RX Data Offset */
+#define HW_CFG_SBP_		(0x00000100)	/* Stall Bulk Out Pipe Dis. */
+#define HW_CFG_IME_		(0x00000080)	/* Internal MII Visi. Enable */
+#define HW_CFG_DRP_		(0x00000040)	/* Discard Errored RX Frame */
+#define HW_CFG_MEF_		(0x00000020)	/* Mult. ETH Frames/USB pkt */
+#define HW_CFG_ETC_		(0x00000010)	/* EEPROM Timeout Control */
+#define HW_CFG_LRST_		(0x00000008)	/* Soft Lite Reset */
+#define HW_CFG_PSEL_		(0x00000004)	/* External PHY Select */
+#define HW_CFG_BCE_		(0x00000002)	/* Burst Cap Enable */
+#define HW_CFG_SRST_		(0x00000001)	/* Soft Reset */
+
+/* Receive FIFO Information Register */
+#define RX_FIFO_INF		(0x18)
+#define RX_FIFO_INF_USED_	(0x0000FFFF)	/* RX Data FIFO Used Space */
+
+/* Transmit FIFO Information Register */
+#define TX_FIFO_INF		(0x1C)
+#define TX_FIFO_INF_FREE_	(0x0000FFFF)	/* TX Data FIFO Free Space */
+
+/* Power Management Control Register */
+#define PM_CTRL			(0x20)
+#define PM_CTL_RES_CLR_WKP_STS	(0x00000200)	/* Resume Clears Wakeup STS */
+#define PM_CTL_RES_CLR_WKP_EN	(0x00000100)	/* Resume Clears Wkp Enables */
+#define PM_CTL_DEV_RDY_		(0x00000080)	/* Device Ready */
+#define PM_CTL_SUS_MODE_	(0x00000060)	/* Suspend Mode */
+#define PM_CTL_SUS_MODE_0	(0x00000000)
+#define PM_CTL_SUS_MODE_1	(0x00000020)
+#define PM_CTL_SUS_MODE_2	(0x00000040)
+#define PM_CTL_SUS_MODE_3	(0x00000060)
+#define PM_CTL_PHY_RST_		(0x00000010)	/* PHY Reset */
+#define PM_CTL_WOL_EN_		(0x00000008)	/* Wake On Lan Enable */
+#define PM_CTL_ED_EN_		(0x00000004)	/* Energy Detect Enable */
+#define PM_CTL_WUPS_		(0x00000003)	/* Wake Up Status */
+#define PM_CTL_WUPS_NO_		(0x00000000)	/* No Wake Up Event Detected */
+#define PM_CTL_WUPS_ED_		(0x00000001)	/* Energy Detect */
+#define PM_CTL_WUPS_WOL_	(0x00000002)	/* Wake On Lan */
+#define PM_CTL_WUPS_MULTI_	(0x00000003)	/* Multiple Events Occurred */
+
+/* LED General Purpose IO Configuration Register */
+#define LED_GPIO_CFG		(0x24)
+#define LED_GPIO_CFG_SPD_LED	(0x01000000)	/* GPIOz as Speed LED */
+#define LED_GPIO_CFG_LNK_LED	(0x00100000)	/* GPIOy as Link LED */
+#define LED_GPIO_CFG_FDX_LED	(0x00010000)	/* GPIOx as Full Duplex LED */
+
+/* General Purpose IO Configuration Register */
+#define GPIO_CFG		(0x28)
+
+/* Automatic Flow Control Configuration Register */
+#define AFC_CFG			(0x2C)
+#define AFC_CFG_HI_		(0x00FF0000)	/* Auto Flow Ctrl High Level */
+#define AFC_CFG_LO_		(0x0000FF00)	/* Auto Flow Ctrl Low Level */
+#define AFC_CFG_BACK_DUR_	(0x000000F0)	/* Back Pressure Duration */
+#define AFC_CFG_FC_MULT_	(0x00000008)	/* Flow Ctrl on Mcast Frame */
+#define AFC_CFG_FC_BRD_		(0x00000004)	/* Flow Ctrl on Bcast Frame */
+#define AFC_CFG_FC_ADD_		(0x00000002)	/* Flow Ctrl on Addr. Decode */
+#define AFC_CFG_FC_ANY_		(0x00000001)	/* Flow Ctrl on Any Frame */
+/* Hi watermark = 15.5Kb (~10 mtu pkts) */
+/* low watermark = 3k (~2 mtu pkts) */
+/* backpressure duration = ~ 350us */
+/* Apply FC on any frame. */
+#define AFC_CFG_DEFAULT		(0x00F830A1)
+
+/* EEPROM Command Register */
+#define E2P_CMD			(0x30)
+#define E2P_CMD_BUSY_		(0x80000000)	/* E2P Controller Busy */
+#define E2P_CMD_MASK_		(0x70000000)	/* Command Mask (see below) */
+#define E2P_CMD_READ_		(0x00000000)	/* Read Location */
+#define E2P_CMD_EWDS_		(0x10000000)	/* Erase/Write Disable */
+#define E2P_CMD_EWEN_		(0x20000000)	/* Erase/Write Enable */
+#define E2P_CMD_WRITE_		(0x30000000)	/* Write Location */
+#define E2P_CMD_WRAL_		(0x40000000)	/* Write All */
+#define E2P_CMD_ERASE_		(0x50000000)	/* Erase Location */
+#define E2P_CMD_ERAL_		(0x60000000)	/* Erase All */
+#define E2P_CMD_RELOAD_		(0x70000000)	/* Data Reload */
+#define E2P_CMD_TIMEOUT_	(0x00000400)	/* Set if no resp within 30ms */
+#define E2P_CMD_LOADED_		(0x00000200)	/* Valid EEPROM found */
+#define E2P_CMD_ADDR_		(0x000001FF)	/* Byte aligned address */
+
+#define MAX_EEPROM_SIZE		(512)
+
+/* EEPROM Data Register */
+#define E2P_DATA		(0x34)
+#define E2P_DATA_MASK_		(0x000000FF)	/* EEPROM Data Mask */
+
+/* Burst Cap Register */
+#define BURST_CAP		(0x38)
+#define BURST_CAP_MASK_		(0x000000FF)	/* Max burst sent by the UTX */
+
+/* Configuration Straps Status Register */
+#define	STRAP_STATUS			(0x3C)
+#define	STRAP_STATUS_PWR_SEL_		(0x00000020) /* Device self-powered */
+#define	STRAP_STATUS_AMDIX_EN_		(0x00000010) /* Auto-MDIX Enabled */
+#define	STRAP_STATUS_PORT_SWAP_		(0x00000008) /* USBD+/USBD- Swapped */
+#define	STRAP_STATUS_EEP_SIZE_		(0x00000004) /* EEPROM Size */
+#define	STRAP_STATUS_RMT_WKP_		(0x00000002) /* Remote Wkp supported */
+#define	STRAP_STATUS_EEP_DISABLE_	(0x00000001) /* EEPROM Disabled */
+
+/* Data Port Select Register */
+#define DP_SEL			(0x40)
+
+/* Data Port Command Register */
+#define DP_CMD			(0x44)
+
+/* Data Port Address Register */
+#define DP_ADDR			(0x48)
+
+/* Data Port Data 0 Register */
+#define DP_DATA0		(0x4C)
+
+/* Data Port Data 1 Register */
+#define DP_DATA1		(0x50)
+
+/* General Purpose IO Wake Enable and Polarity Register */
+#define GPIO_WAKE		(0x64)
+
+/* Interrupt Endpoint Control Register */
+#define INT_EP_CTL		(0x68)
+#define INT_EP_CTL_INTEP_	(0x80000000)	/* Always TX Interrupt PKT */
+#define INT_EP_CTL_MAC_RTO_	(0x00080000)	/* MAC Reset Time Out */
+#define INT_EP_CTL_RX_FIFO_	(0x00040000)	/* RX FIFO Has Frame */
+#define INT_EP_CTL_TX_STOP_	(0x00020000)	/* TX Stopped */
+#define INT_EP_CTL_RX_STOP_	(0x00010000)	/* RX Stopped */
+#define INT_EP_CTL_PHY_INT_	(0x00008000)	/* PHY Interrupt */
+#define INT_EP_CTL_TXE_		(0x00004000)	/* TX Error */
+#define INT_EP_CTL_TDFU_	(0x00002000)	/* TX Data FIFO Underrun */
+#define INT_EP_CTL_TDFO_	(0x00001000)	/* TX Data FIFO Overrun */
+#define INT_EP_CTL_RXDF_	(0x00000800)	/* RX Dropped Frame */
+#define INT_EP_CTL_GPIOS_	(0x000007FF)	/* GPIOs Interrupt Enable */
+
+/* Bulk In Delay Register (units of 16.667ns, until ~1092µs) */
+#define BULK_IN_DLY		(0x6C)
+
+/* MAC CSRs - MAC Control and Status Registers */
+/* MAC Control Register */
+#define MAC_CR			(0x100)
+#define MAC_CR_RXALL_		(0x80000000)	/* Receive All Mode */
+#define MAC_CR_RCVOWN_		(0x00800000)	/* Disable Receive Own */
+#define MAC_CR_LOOPBK_		(0x00200000)	/* Loopback Operation Mode */
+#define MAC_CR_FDPX_		(0x00100000)	/* Full Duplex Mode */
+#define MAC_CR_MCPAS_		(0x00080000)	/* Pass All Multicast */
+#define MAC_CR_PRMS_		(0x00040000)	/* Promiscuous Mode */
+#define MAC_CR_INVFILT_		(0x00020000)	/* Inverse Filtering */
+#define MAC_CR_PASSBAD_		(0x00010000)	/* Pass Bad Frames */
+#define MAC_CR_HFILT_		(0x00008000)	/* Hash Only Filtering Mode */
+#define MAC_CR_HPFILT_		(0x00002000)	/* Hash/Perfect Filt. Mode */
+#define MAC_CR_LCOLL_		(0x00001000)	/* Late Collision Control */
+#define MAC_CR_BCAST_		(0x00000800)	/* Disable Broadcast Frames */
+#define MAC_CR_DISRTY_		(0x00000400)	/* Disable Retry */
+#define MAC_CR_PADSTR_		(0x00000100)	/* Automatic Pad Stripping */
+#define MAC_CR_BOLMT_MASK	(0x000000C0)	/* BackOff Limit */
+#define MAC_CR_DFCHK_		(0x00000020)	/* Deferral Check */
+#define MAC_CR_TXEN_		(0x00000008)	/* Transmitter Enable */
+#define MAC_CR_RXEN_		(0x00000004)	/* Receiver Enable */
+
+/* MAC Address High Register */
+#define ADDRH			(0x104)
+
+/* MAC Address Low Register */
+#define ADDRL			(0x108)
+
+/* Multicast Hash Table High Register */
+#define HASHH			(0x10C)
+
+/* Multicast Hash Table Low Register */
+#define HASHL			(0x110)
+
+/* MII Access Register */
+#define MII_ADDR		(0x114)
+#define MII_WRITE_		(0x02)
+#define MII_BUSY_		(0x01)
+#define MII_READ_		(0x00) /* ~of MII Write bit */
+
+/* MII Data Register */
+#define MII_DATA		(0x118)
+
+/* Flow Control Register */
+#define FLOW			(0x11C)
+#define FLOW_FCPT_		(0xFFFF0000)	/* Pause Time */
+#define FLOW_FCPASS_		(0x00000004)	/* Pass Control Frames */
+#define FLOW_FCEN_		(0x00000002)	/* Flow Control Enable */
+#define FLOW_FCBSY_		(0x00000001)	/* Flow Control Busy */
+
+/* VLAN1 Tag Register */
+#define VLAN1			(0x120)
+
+/* VLAN2 Tag Register */
+#define VLAN2			(0x124)
+
+/* Wake Up Frame Filter Register */
+#define WUFF			(0x128)
+#define LAN9500_WUFF_NUM	(4)
+#define LAN9500A_WUFF_NUM	(8)
+
+/* Wake Up Control and Status Register */
+#define WUCSR			(0x12C)
+#define WUCSR_WFF_PTR_RST_	(0x80000000)	/* WFrame Filter Pointer Rst */
+#define WUCSR_GUE_		(0x00000200)	/* Global Unicast Enable */
+#define WUCSR_WUFR_		(0x00000040)	/* Wakeup Frame Received */
+#define WUCSR_MPR_		(0x00000020)	/* Magic Packet Received */
+#define WUCSR_WAKE_EN_		(0x00000004)	/* Wakeup Frame Enable */
+#define WUCSR_MPEN_		(0x00000002)	/* Magic Packet Enable */
+
+/* Checksum Offload Engine Control Register */
+#define COE_CR			(0x130)
+#define Tx_COE_EN_		(0x00010000)	/* TX Csum Offload Enable */
+#define Rx_COE_MODE_		(0x00000002)	/* RX Csum Offload Mode */
+#define Rx_COE_EN_		(0x00000001)	/* RX Csum Offload Enable */
+
+/* Vendor-specific PHY Definitions (via MII access) */
+/* EDPD NLP / crossover time configuration (LAN9500A only) */
+#define PHY_EDPD_CONFIG			(16)
+#define PHY_EDPD_CONFIG_TX_NLP_EN_	((u16)0x8000)
+#define PHY_EDPD_CONFIG_TX_NLP_1000_	((u16)0x0000)
+#define PHY_EDPD_CONFIG_TX_NLP_768_	((u16)0x2000)
+#define PHY_EDPD_CONFIG_TX_NLP_512_	((u16)0x4000)
+#define PHY_EDPD_CONFIG_TX_NLP_256_	((u16)0x6000)
+#define PHY_EDPD_CONFIG_RX_1_NLP_	((u16)0x1000)
+#define PHY_EDPD_CONFIG_RX_NLP_64_	((u16)0x0000)
+#define PHY_EDPD_CONFIG_RX_NLP_256_	((u16)0x0400)
+#define PHY_EDPD_CONFIG_RX_NLP_512_	((u16)0x0800)
+#define PHY_EDPD_CONFIG_RX_NLP_1000_	((u16)0x0C00)
+#define PHY_EDPD_CONFIG_EXT_CROSSOVER_	((u16)0x0001)
+#define PHY_EDPD_CONFIG_DEFAULT		(PHY_EDPD_CONFIG_TX_NLP_EN_ | \
+					 PHY_EDPD_CONFIG_TX_NLP_768_ | \
+					 PHY_EDPD_CONFIG_RX_1_NLP_)
+
+/* Mode Control/Status Register */
+#define PHY_MODE_CTRL_STS		(17)
+#define MODE_CTRL_STS_EDPWRDOWN_	((u16)0x2000)
+#define MODE_CTRL_STS_ENERGYON_		((u16)0x0002)
+
+/* Control/Status Indication Register */
+#define SPECIAL_CTRL_STS		(27)
+#define SPECIAL_CTRL_STS_OVRRD_AMDIX_	((u16)0x8000)
+#define SPECIAL_CTRL_STS_AMDIX_ENABLE_	((u16)0x4000)
+#define SPECIAL_CTRL_STS_AMDIX_STATE_	((u16)0x2000)
+
+/* Interrupt Source Register */
+#define PHY_INT_SRC			(29)
+#define PHY_INT_SRC_ENERGY_ON_		((u16)0x0080)
+#define PHY_INT_SRC_ANEG_COMP_		((u16)0x0040)
+#define PHY_INT_SRC_REMOTE_FAULT_	((u16)0x0020)
+#define PHY_INT_SRC_LINK_DOWN_		((u16)0x0010)
+
+/* Interrupt Mask Register */
+#define PHY_INT_MASK			(30)
+#define PHY_INT_MASK_ENERGY_ON_		((u16)0x0080)
+#define PHY_INT_MASK_ANEG_COMP_		((u16)0x0040)
+#define PHY_INT_MASK_REMOTE_FAULT_	((u16)0x0020)
+#define PHY_INT_MASK_LINK_DOWN_		((u16)0x0010)
+#define PHY_INT_MASK_DEFAULT_		(PHY_INT_MASK_ANEG_COMP_ | \
+					 PHY_INT_MASK_LINK_DOWN_)
+/* PHY Special Control/Status Register */
+#define PHY_SPECIAL			(31)
+#define PHY_SPECIAL_SPD_		((u16)0x001C)
+#define PHY_SPECIAL_SPD_10HALF_		((u16)0x0004)
+#define PHY_SPECIAL_SPD_10FULL_		((u16)0x0014)
+#define PHY_SPECIAL_SPD_100HALF_	((u16)0x0008)
+#define PHY_SPECIAL_SPD_100FULL_	((u16)0x0018)
+
+/* USB Vendor Requests */
+#define USB_VENDOR_REQUEST_WRITE_REGISTER	0xA0
+#define USB_VENDOR_REQUEST_READ_REGISTER	0xA1
+#define USB_VENDOR_REQUEST_GET_STATS		0xA2
+
+/* Interrupt Endpoint status word bitfields */
+#define INT_ENP_MAC_RTO_		((u32)BIT(18))	/* MAC Reset Time Out */
+#define INT_ENP_TX_STOP_		((u32)BIT(17))	/* TX Stopped */
+#define INT_ENP_RX_STOP_		((u32)BIT(16))	/* RX Stopped */
+#define INT_ENP_PHY_INT_		((u32)BIT(15))	/* PHY Interrupt */
+#define INT_ENP_TXE_			((u32)BIT(14))	/* TX Error */
+#define INT_ENP_TDFU_			((u32)BIT(13))	/* TX FIFO Underrun */
+#define INT_ENP_TDFO_			((u32)BIT(12))	/* TX FIFO Overrun */
+#define INT_ENP_RXDF_			((u32)BIT(11))	/* RX Dropped Frame */
+
+#endif /* _SMSC95XX_H */
diff --git a/drivers/net/usb/sr9700.c b/drivers/net/usb/sr9700.c
new file mode 100644
index 000000000..3164451e1
--- /dev/null
+++ b/drivers/net/usb/sr9700.c
@@ -0,0 +1,558 @@
+/*
+ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * Based on dm9601.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/stddef.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+
+#include "sr9700.h"
+
+static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+
+	err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data,
+			      length);
+	if ((err != length) && (err >= 0))
+		err = -EINVAL;
+	return err;
+}
+
+static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data)
+{
+	int err;
+
+	err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data,
+			       length);
+	if ((err >= 0) && (err < length))
+		err = -EINVAL;
+	return err;
+}
+
+static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value)
+{
+	return sr_read(dev, reg, 1, value);
+}
+
+static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value)
+{
+	return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG,
+				value, reg, NULL, 0);
+}
+
+static void sr_write_async(struct usbnet *dev, u8 reg, u16 length,
+			   const void *data)
+{
+	usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
+			       0, reg, data, length);
+}
+
+static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
+{
+	usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG,
+			       value, reg, NULL, 0);
+}
+
+static int wait_phy_eeprom_ready(struct usbnet *dev, int phy)
+{
+	int i;
+
+	for (i = 0; i < SR_SHARE_TIMEOUT; i++) {
+		u8 tmp = 0;
+		int ret;
+
+		udelay(1);
+		ret = sr_read_reg(dev, SR_EPCR, &tmp);
+		if (ret < 0)
+			return ret;
+
+		/* ready */
+		if (!(tmp & EPCR_ERRE))
+			return 0;
+	}
+
+	netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom");
+
+	return -EIO;
+}
+
+static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg,
+			      __le16 *value)
+{
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
+	sr_write_reg(dev, SR_EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR);
+
+	ret = wait_phy_eeprom_ready(dev, phy);
+	if (ret < 0)
+		goto out_unlock;
+
+	sr_write_reg(dev, SR_EPCR, 0x0);
+	ret = sr_read(dev, SR_EPDR, 2, value);
+
+	netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n",
+		   phy, reg, *value, ret);
+
+out_unlock:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg,
+			       __le16 value)
+{
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = sr_write(dev, SR_EPDR, 2, &value);
+	if (ret < 0)
+		goto out_unlock;
+
+	sr_write_reg(dev, SR_EPAR, phy ? (reg | EPAR_PHY_ADR) : reg);
+	sr_write_reg(dev, SR_EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) :
+		    (EPCR_WEP | EPCR_ERPRW));
+
+	ret = wait_phy_eeprom_ready(dev, phy);
+	if (ret < 0)
+		goto out_unlock;
+
+	sr_write_reg(dev, SR_EPCR, 0x0);
+
+out_unlock:
+	mutex_unlock(&dev->phy_mutex);
+	return ret;
+}
+
+static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value)
+{
+	return sr_share_read_word(dev, 0, offset, value);
+}
+
+static int sr9700_get_eeprom_len(struct net_device *netdev)
+{
+	return SR_EEPROM_LEN;
+}
+
+static int sr9700_get_eeprom(struct net_device *netdev,
+			     struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 *buf = (__le16 *)data;
+	int ret = 0;
+	int i;
+
+	/* access is 16bit */
+	if ((eeprom->offset & 0x01) || (eeprom->len & 0x01))
+		return -EINVAL;
+
+	for (i = 0; i < eeprom->len / 2; i++) {
+		ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i);
+		if (ret < 0)
+			break;
+	}
+
+	return ret;
+}
+
+static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	int rc = 0;
+
+	if (phy_id) {
+		netdev_dbg(netdev, "Only internal phy supported\n");
+		return 0;
+	}
+
+	/* Access NSR_LINKST bit for link status instead of MII_BMSR */
+	if (loc == MII_BMSR) {
+		u8 value;
+
+		sr_read_reg(dev, SR_NSR, &value);
+		if (value & NSR_LINKST)
+			rc = 1;
+	}
+	sr_share_read_word(dev, 1, loc, &res);
+	if (rc == 1)
+		res = le16_to_cpu(res) | BMSR_LSTATUS;
+	else
+		res = le16_to_cpu(res) & ~BMSR_LSTATUS;
+
+	netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+		   phy_id, loc, res);
+
+	return res;
+}
+
+static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc,
+			  int val)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+
+	if (phy_id) {
+		netdev_dbg(netdev, "Only internal phy supported\n");
+		return;
+	}
+
+	netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+		   phy_id, loc, val);
+
+	sr_share_write_word(dev, 1, loc, res);
+}
+
+static u32 sr9700_get_link(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	u8 value = 0;
+	int rc = 0;
+
+	/* Get the Link Status directly */
+	sr_read_reg(dev, SR_NSR, &value);
+	if (value & NSR_LINKST)
+		rc = 1;
+
+	return rc;
+}
+
+static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops sr9700_ethtool_ops = {
+	.get_drvinfo	= usbnet_get_drvinfo,
+	.get_link	= sr9700_get_link,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_eeprom_len	= sr9700_get_eeprom_len,
+	.get_eeprom	= sr9700_get_eeprom,
+	.nway_reset	= usbnet_nway_reset,
+	.get_link_ksettings	= usbnet_get_link_ksettings_mii,
+	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
+};
+
+static void sr9700_set_multicast(struct net_device *netdev)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	/* We use the 20 byte dev->data for our 8 byte filter buffer
+	 * to avoid allocating memory that is tricky to free later
+	 */
+	u8 *hashes = (u8 *)&dev->data;
+	/* rx_ctl setting : enable, disable_long, disable_crc */
+	u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG;
+
+	memset(hashes, 0x00, SR_MCAST_SIZE);
+	/* broadcast address */
+	hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG;
+	if (netdev->flags & IFF_PROMISC) {
+		rx_ctl |= RCR_PRMSC;
+	} else if (netdev->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(netdev) > SR_MCAST_MAX) {
+		rx_ctl |= RCR_RUNT;
+	} else if (!netdev_mc_empty(netdev)) {
+		struct netdev_hw_addr *ha;
+
+		netdev_for_each_mc_addr(ha, netdev) {
+			u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			hashes[crc >> 3] |= 1 << (crc & 0x7);
+		}
+	}
+
+	sr_write_async(dev, SR_MAR, SR_MCAST_SIZE, hashes);
+	sr_write_reg_async(dev, SR_RCR, rx_ctl);
+}
+
+static int sr9700_set_mac_address(struct net_device *netdev, void *p)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data)) {
+		netdev_err(netdev, "not setting invalid mac address %pM\n",
+			   addr->sa_data);
+		return -EINVAL;
+	}
+
+	eth_hw_addr_set(netdev, addr->sa_data);
+	sr_write_async(dev, SR_PAR, 6, netdev->dev_addr);
+
+	return 0;
+}
+
+static const struct net_device_ops sr9700_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= sr9700_ioctl,
+	.ndo_set_rx_mode	= sr9700_set_multicast,
+	.ndo_set_mac_address	= sr9700_set_mac_address,
+};
+
+static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct net_device *netdev;
+	struct mii_if_info *mii;
+	u8 addr[ETH_ALEN];
+	int ret;
+
+	ret = usbnet_get_endpoints(dev, intf);
+	if (ret)
+		goto out;
+
+	netdev = dev->net;
+
+	netdev->netdev_ops = &sr9700_netdev_ops;
+	netdev->ethtool_ops = &sr9700_ethtool_ops;
+	netdev->hard_header_len += SR_TX_OVERHEAD;
+	dev->hard_mtu = netdev->mtu + netdev->hard_header_len;
+	/* bulkin buffer is preferably not less than 3K */
+	dev->rx_urb_size = 3072;
+
+	mii = &dev->mii;
+	mii->dev = netdev;
+	mii->mdio_read = sr_mdio_read;
+	mii->mdio_write = sr_mdio_write;
+	mii->phy_id_mask = 0x1f;
+	mii->reg_num_mask = 0x1f;
+
+	sr_write_reg(dev, SR_NCR, NCR_RST);
+	udelay(20);
+
+	/* read MAC
+	 * After Chip Power on, the Chip will reload the MAC from
+	 * EEPROM automatically to PAR. In case there is no EEPROM externally,
+	 * a default MAC address is stored in PAR for making chip work properly.
+	 */
+	if (sr_read(dev, SR_PAR, ETH_ALEN, addr) < 0) {
+		netdev_err(netdev, "Error reading MAC address\n");
+		ret = -ENODEV;
+		goto out;
+	}
+	eth_hw_addr_set(netdev, addr);
+
+	/* power up and reset phy */
+	sr_write_reg(dev, SR_PRR, PRR_PHY_RST);
+	/* at least 10ms, here 20ms for safe */
+	msleep(20);
+	sr_write_reg(dev, SR_PRR, 0);
+	/* at least 1ms, here 2ms for reading right register */
+	udelay(2 * 1000);
+
+	/* receive broadcast packets */
+	sr9700_set_multicast(netdev);
+
+	sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET);
+	sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL |
+		      ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
+	mii_nway_restart(mii);
+
+out:
+	return ret;
+}
+
+static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct sk_buff *sr_skb;
+	int len;
+
+	/* skb content (packets) format :
+	 *                    p0            p1            p2    ......    pm
+	 *                 /      \
+	 *            /                \
+	 *        /                            \
+	 *  /                                        \
+	 * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn
+	 *
+	 * p0 : packet 0
+	 * p0b0 : packet 0 byte 0
+	 *
+	 * b0: rx status
+	 * b1: packet length (incl crc) low
+	 * b2: packet length (incl crc) high
+	 * b3..n-4: packet data
+	 * bn-3..bn: ethernet packet crc
+	 */
+	if (unlikely(skb->len < SR_RX_OVERHEAD)) {
+		netdev_err(dev->net, "unexpected tiny rx frame\n");
+		return 0;
+	}
+
+	/* one skb may contains multiple packets */
+	while (skb->len > SR_RX_OVERHEAD) {
+		if (skb->data[0] != 0x40)
+			return 0;
+
+		/* ignore the CRC length */
+		len = (skb->data[1] | (skb->data[2] << 8)) - 4;
+
+		if (len > ETH_FRAME_LEN || len > skb->len || len < 0)
+			return 0;
+
+		/* the last packet of current skb */
+		if (skb->len == (len + SR_RX_OVERHEAD))	{
+			skb_pull(skb, 3);
+			skb->len = len;
+			skb_set_tail_pointer(skb, len);
+			skb->truesize = len + sizeof(struct sk_buff);
+			return 2;
+		}
+
+		/* skb_clone is used for address align */
+		sr_skb = skb_clone(skb, GFP_ATOMIC);
+		if (!sr_skb)
+			return 0;
+
+		sr_skb->len = len;
+		sr_skb->data = skb->data + 3;
+		skb_set_tail_pointer(sr_skb, len);
+		sr_skb->truesize = len + sizeof(struct sk_buff);
+		usbnet_skb_return(dev, sr_skb);
+
+		skb_pull(skb, len + SR_RX_OVERHEAD);
+	}
+
+	return 0;
+}
+
+static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+				       gfp_t flags)
+{
+	int len;
+
+	/* SR9700 can only send out one ethernet packet at once.
+	 *
+	 * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn
+	 *
+	 * b0: rx status
+	 * b1: packet length (incl crc) low
+	 * b2: packet length (incl crc) high
+	 * b3..n-4: packet data
+	 * bn-3..bn: ethernet packet crc
+	 */
+
+	len = skb->len;
+
+	if (skb_cow_head(skb, SR_TX_OVERHEAD)) {
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+
+	__skb_push(skb, SR_TX_OVERHEAD);
+
+	/* usbnet adds padding if length is a multiple of packet size
+	 * if so, adjust length value in header
+	 */
+	if ((skb->len % dev->maxpacket) == 0)
+		len++;
+
+	skb->data[0] = len;
+	skb->data[1] = len >> 8;
+
+	return skb;
+}
+
+static void sr9700_status(struct usbnet *dev, struct urb *urb)
+{
+	int link;
+	u8 *buf;
+
+	/* format:
+	   b0: net status
+	   b1: tx status 1
+	   b2: tx status 2
+	   b3: rx status
+	   b4: rx overflow
+	   b5: rx count
+	   b6: tx count
+	   b7: gpr
+	*/
+
+	if (urb->actual_length < 8)
+		return;
+
+	buf = urb->transfer_buffer;
+
+	link = !!(buf[0] & 0x40);
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+}
+
+static int sr9700_link_reset(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd;
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+
+	netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n",
+		   ecmd.speed, ecmd.duplex);
+
+	return 0;
+}
+
+static const struct driver_info sr9700_driver_info = {
+	.description	= "CoreChip SR9700 USB Ethernet",
+	.flags		= FLAG_ETHER,
+	.bind		= sr9700_bind,
+	.rx_fixup	= sr9700_rx_fixup,
+	.tx_fixup	= sr9700_tx_fixup,
+	.status		= sr9700_status,
+	.link_reset	= sr9700_link_reset,
+	.reset		= sr9700_link_reset,
+};
+
+static const struct usb_device_id products[] = {
+	{
+		USB_DEVICE(0x0fe6, 0x9700),	/* SR9700 device */
+		.driver_info = (unsigned long)&sr9700_driver_info,
+	},
+	{},			/* END */
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver sr9700_usb_driver = {
+	.name		= "sr9700",
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.disconnect	= usbnet_disconnect,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(sr9700_usb_driver);
+
+MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>");
+MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/sr9700.h b/drivers/net/usb/sr9700.h
new file mode 100644
index 000000000..ea2b4de62
--- /dev/null
+++ b/drivers/net/usb/sr9700.h
@@ -0,0 +1,170 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ */
+
+#ifndef _SR9700_H
+#define	_SR9700_H
+
+/* sr9700 spec. register table on Linux platform */
+
+/* Network Control Reg */
+#define	SR_NCR			0x00
+#define		NCR_RST			(1 << 0)
+#define		NCR_LBK			(3 << 1)
+#define		NCR_FDX			(1 << 3)
+#define		NCR_WAKEEN		(1 << 6)
+/* Network Status Reg */
+#define	SR_NSR			0x01
+#define		NSR_RXRDY		(1 << 0)
+#define		NSR_RXOV		(1 << 1)
+#define		NSR_TX1END		(1 << 2)
+#define		NSR_TX2END		(1 << 3)
+#define		NSR_TXFULL		(1 << 4)
+#define		NSR_WAKEST		(1 << 5)
+#define		NSR_LINKST		(1 << 6)
+#define		NSR_SPEED		(1 << 7)
+/* Tx Control Reg */
+#define	SR_TCR			0x02
+#define		TCR_CRC_DIS		(1 << 1)
+#define		TCR_PAD_DIS		(1 << 2)
+#define		TCR_LC_CARE		(1 << 3)
+#define		TCR_CRS_CARE	(1 << 4)
+#define		TCR_EXCECM		(1 << 5)
+#define		TCR_LF_EN		(1 << 6)
+/* Tx Status Reg for Packet Index 1 */
+#define	SR_TSR1		0x03
+#define		TSR1_EC			(1 << 2)
+#define		TSR1_COL		(1 << 3)
+#define		TSR1_LC			(1 << 4)
+#define		TSR1_NC			(1 << 5)
+#define		TSR1_LOC		(1 << 6)
+#define		TSR1_TLF		(1 << 7)
+/* Tx Status Reg for Packet Index 2 */
+#define	SR_TSR2		0x04
+#define		TSR2_EC			(1 << 2)
+#define		TSR2_COL		(1 << 3)
+#define		TSR2_LC			(1 << 4)
+#define		TSR2_NC			(1 << 5)
+#define		TSR2_LOC		(1 << 6)
+#define		TSR2_TLF		(1 << 7)
+/* Rx Control Reg*/
+#define	SR_RCR			0x05
+#define		RCR_RXEN		(1 << 0)
+#define		RCR_PRMSC		(1 << 1)
+#define		RCR_RUNT		(1 << 2)
+#define		RCR_ALL			(1 << 3)
+#define		RCR_DIS_CRC		(1 << 4)
+#define		RCR_DIS_LONG	(1 << 5)
+/* Rx Status Reg */
+#define	SR_RSR			0x06
+#define		RSR_AE			(1 << 2)
+#define		RSR_MF			(1 << 6)
+#define		RSR_RF			(1 << 7)
+/* Rx Overflow Counter Reg */
+#define	SR_ROCR		0x07
+#define		ROCR_ROC		(0x7F << 0)
+#define		ROCR_RXFU		(1 << 7)
+/* Back Pressure Threshold Reg */
+#define	SR_BPTR		0x08
+#define		BPTR_JPT		(0x0F << 0)
+#define		BPTR_BPHW		(0x0F << 4)
+/* Flow Control Threshold Reg */
+#define	SR_FCTR		0x09
+#define		FCTR_LWOT		(0x0F << 0)
+#define		FCTR_HWOT		(0x0F << 4)
+/* rx/tx Flow Control Reg */
+#define	SR_FCR			0x0A
+#define		FCR_FLCE		(1 << 0)
+#define		FCR_BKPA		(1 << 4)
+#define		FCR_TXPEN		(1 << 5)
+#define		FCR_TXPF		(1 << 6)
+#define		FCR_TXP0		(1 << 7)
+/* Eeprom & Phy Control Reg */
+#define	SR_EPCR		0x0B
+#define		EPCR_ERRE		(1 << 0)
+#define		EPCR_ERPRW		(1 << 1)
+#define		EPCR_ERPRR		(1 << 2)
+#define		EPCR_EPOS		(1 << 3)
+#define		EPCR_WEP		(1 << 4)
+/* Eeprom & Phy Address Reg */
+#define	SR_EPAR		0x0C
+#define		EPAR_EROA		(0x3F << 0)
+#define		EPAR_PHY_ADR_MASK	(0x03 << 6)
+#define		EPAR_PHY_ADR		(0x01 << 6)
+/* Eeprom &	Phy Data Reg */
+#define	SR_EPDR		0x0D	/* 0x0D ~ 0x0E for Data Reg Low & High */
+/* Wakeup Control Reg */
+#define	SR_WCR			0x0F
+#define		WCR_MAGICST		(1 << 0)
+#define		WCR_LINKST		(1 << 2)
+#define		WCR_MAGICEN		(1 << 3)
+#define		WCR_LINKEN		(1 << 5)
+/* Physical Address Reg */
+#define	SR_PAR			0x10	/* 0x10 ~ 0x15 6 bytes for PAR */
+/* Multicast Address Reg */
+#define	SR_MAR			0x16	/* 0x16 ~ 0x1D 8 bytes for MAR */
+/* 0x1e unused */
+/* Phy Reset Reg */
+#define	SR_PRR			0x1F
+#define		PRR_PHY_RST		(1 << 0)
+/* Tx sdram Write Pointer Address Low */
+#define	SR_TWPAL		0x20
+/* Tx sdram Write Pointer Address High */
+#define	SR_TWPAH		0x21
+/* Tx sdram Read Pointer Address Low */
+#define	SR_TRPAL		0x22
+/* Tx sdram Read Pointer Address High */
+#define	SR_TRPAH		0x23
+/* Rx sdram Write Pointer Address Low */
+#define	SR_RWPAL		0x24
+/* Rx sdram Write Pointer Address High */
+#define	SR_RWPAH		0x25
+/* Rx sdram Read Pointer Address Low */
+#define	SR_RRPAL		0x26
+/* Rx sdram Read Pointer Address High */
+#define	SR_RRPAH		0x27
+/* Vendor ID register */
+#define	SR_VID			0x28	/* 0x28 ~ 0x29 2 bytes for VID */
+/* Product ID register */
+#define	SR_PID			0x2A	/* 0x2A ~ 0x2B 2 bytes for PID */
+/* CHIP Revision register */
+#define	SR_CHIPR		0x2C
+/* 0x2D --> 0xEF unused */
+/* USB Device Address */
+#define	SR_USBDA		0xF0
+#define		USBDA_USBFA		(0x7F << 0)
+/* RX packet Counter Reg */
+#define	SR_RXC			0xF1
+/* Tx packet Counter & USB Status Reg */
+#define	SR_TXC_USBS		0xF2
+#define		TXC_USBS_TXC0		(1 << 0)
+#define		TXC_USBS_TXC1		(1 << 1)
+#define		TXC_USBS_TXC2		(1 << 2)
+#define		TXC_USBS_EP1RDY		(1 << 5)
+#define		TXC_USBS_SUSFLAG	(1 << 6)
+#define		TXC_USBS_RXFAULT	(1 << 7)
+/* USB Control register */
+#define	SR_USBC			0xF4
+#define		USBC_EP3NAK		(1 << 4)
+#define		USBC_EP3ACK		(1 << 5)
+
+/* Register access commands and flags */
+#define	SR_RD_REGS		0x00
+#define	SR_WR_REGS		0x01
+#define	SR_WR_REG		0x03
+#define	SR_REQ_RD_REG	(USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+#define	SR_REQ_WR_REG	(USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+
+/* parameters */
+#define	SR_SHARE_TIMEOUT	1000
+#define	SR_EEPROM_LEN		256
+#define	SR_MCAST_SIZE		8
+#define	SR_MCAST_ADDR_FLAG	0x80
+#define	SR_MCAST_MAX		64
+#define	SR_TX_OVERHEAD		2	/* 2bytes header */
+#define	SR_RX_OVERHEAD		7	/* 3bytes header + 4crc tail */
+
+#endif	/* _SR9700_H */
diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c
new file mode 100644
index 000000000..f5e19f3ef
--- /dev/null
+++ b/drivers/net/usb/sr9800.c
@@ -0,0 +1,875 @@
+/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * Based on asix_common.c, asix_devices.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.*
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/if_vlan.h>
+
+#include "sr9800.h"
+
+static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			    u16 size, void *data)
+{
+	int err;
+
+	err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index,
+			      data, size);
+	if ((err != size) && (err >= 0))
+		err = -EINVAL;
+
+	return err;
+}
+
+static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			     u16 size, void *data)
+{
+	int err;
+
+	err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index,
+			      data, size);
+	if ((err != size) && (err >= 0))
+		err = -EINVAL;
+
+	return err;
+}
+
+static void
+sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		   u16 size, void *data)
+{
+	usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data,
+			       size);
+}
+
+static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+	int offset = 0;
+
+	/* This check is no longer done by usbnet */
+	if (skb->len < dev->net->hard_header_len)
+		return 0;
+
+	while (offset + sizeof(u32) < skb->len) {
+		struct sk_buff *sr_skb;
+		u16 size;
+		u32 header = get_unaligned_le32(skb->data + offset);
+
+		offset += sizeof(u32);
+		/* get the packet length */
+		size = (u16) (header & 0x7ff);
+		if (size != ((~header >> 16) & 0x07ff)) {
+			netdev_err(dev->net, "%s : Bad Header Length\n",
+				   __func__);
+			return 0;
+		}
+
+		if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
+		    (size + offset > skb->len)) {
+			netdev_err(dev->net, "%s : Bad RX Length %d\n",
+				   __func__, size);
+			return 0;
+		}
+		sr_skb = netdev_alloc_skb_ip_align(dev->net, size);
+		if (!sr_skb)
+			return 0;
+
+		skb_put(sr_skb, size);
+		memcpy(sr_skb->data, skb->data + offset, size);
+		usbnet_skb_return(dev, sr_skb);
+
+		offset += (size + 1) & 0xfffe;
+	}
+
+	if (skb->len != offset) {
+		netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__,
+			   skb->len);
+		return 0;
+	}
+
+	return 1;
+}
+
+static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+					gfp_t flags)
+{
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	u32 padbytes = 0xffff0000;
+	u32 packet_len;
+	int padlen;
+	void *ptr;
+
+	padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4;
+
+	if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) {
+		if ((headroom < 4) || (tailroom < padlen)) {
+			skb->data = memmove(skb->head + 4, skb->data,
+					    skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+		skb2 = skb_copy_expand(skb, 4, padlen, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	ptr = skb_push(skb, 4);
+	packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+	put_unaligned_le32(packet_len, ptr);
+
+	if (padlen) {
+		put_unaligned_le32(padbytes, skb_tail_pointer(skb));
+		skb_put(skb, sizeof(padbytes));
+	}
+
+	usbnet_set_skb_tx_stats(skb, 1, 0);
+	return skb;
+}
+
+static void sr_status(struct usbnet *dev, struct urb *urb)
+{
+	struct sr9800_int_data *event;
+	int link;
+
+	if (urb->actual_length < 8)
+		return;
+
+	event = urb->transfer_buffer;
+	link = event->link & 0x01;
+	if (netif_carrier_ok(dev->net) != link) {
+		usbnet_link_change(dev, link, 1);
+		netdev_dbg(dev->net, "Link Status is: %d\n", link);
+	}
+
+	return;
+}
+
+static inline int sr_set_sw_mii(struct usbnet *dev)
+{
+	int ret;
+
+	ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable software MII access\n");
+	return ret;
+}
+
+static inline int sr_set_hw_mii(struct usbnet *dev)
+{
+	int ret;
+
+	ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable hardware MII access\n");
+	return ret;
+}
+
+static inline int sr_get_phy_addr(struct usbnet *dev)
+{
+	u8 buf[2];
+	int ret;
+
+	ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf);
+	if (ret < 0) {
+		netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n",
+			   __func__, ret);
+		goto out;
+	}
+	netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__,
+		   *((__le16 *)buf));
+
+	ret = buf[1];
+
+out:
+	return ret;
+}
+
+static int sr_sw_reset(struct usbnet *dev, u8 flags)
+{
+	int ret;
+
+	ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to send software reset:%02x\n",
+			   ret);
+
+	return ret;
+}
+
+static u16 sr_read_rx_ctl(struct usbnet *dev)
+{
+	__le16 v;
+	int ret;
+
+	ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v);
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading RX_CTL register:%02x\n",
+			   ret);
+		goto out;
+	}
+
+	ret = le16_to_cpu(v);
+out:
+	return ret;
+}
+
+static int sr_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net,
+			   "Failed to write RX_CTL mode to 0x%04x:%02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+static u16 sr_read_medium_status(struct usbnet *dev)
+{
+	__le16 v;
+	int ret;
+
+	ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+	if (ret < 0) {
+		netdev_err(dev->net,
+			   "Error reading Medium Status register:%02x\n", ret);
+		return ret;	/* TODO: callers not checking for error ret */
+	}
+
+	return le16_to_cpu(v);
+}
+
+static int sr_write_medium_mode(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net,
+			   "Failed to write Medium Mode mode to 0x%04x:%02x\n",
+			   mode, ret);
+	return ret;
+}
+
+static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value);
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n",
+			   value, ret);
+	if (sleep)
+		msleep(sleep);
+
+	return ret;
+}
+
+/* SR9800 have a 16-bit RX_CTL value */
+static void sr_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct sr_data *data = (struct sr_data *)&dev->data;
+	u16 rx_ctl = SR_DEFAULT_RX_CTL;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= SR_RX_CTL_PRO;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > SR_MAX_MCAST) {
+		rx_ctl |= SR_RX_CTL_AMALL;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later
+		 */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   SR_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= SR_RX_CTL_AM;
+	}
+
+	sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
+{
+	struct usbnet *dev = netdev_priv(net);
+	__le16 res = 0;
+
+	mutex_lock(&dev->phy_mutex);
+	sr_set_sw_mii(dev);
+	sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res);
+	sr_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net,
+		   "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__,
+		   phy_id, loc, le16_to_cpu(res));
+
+	return le16_to_cpu(res);
+}
+
+static void
+sr_mdio_write(struct net_device *net, int phy_id, int loc, int val)
+{
+	struct usbnet *dev = netdev_priv(net);
+	__le16 res = cpu_to_le16(val);
+
+	netdev_dbg(dev->net,
+		   "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__,
+		   phy_id, loc, val);
+	mutex_lock(&dev->phy_mutex);
+	sr_set_sw_mii(dev);
+	sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
+	sr_set_hw_mii(dev);
+	mutex_unlock(&dev->phy_mutex);
+}
+
+/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
+static u32 sr_get_phyid(struct usbnet *dev)
+{
+	int phy_reg;
+	u32 phy_id;
+	int i;
+
+	/* Poll for the rare case the FW or phy isn't ready yet.  */
+	for (i = 0; i < 100; i++) {
+		phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+		if (phy_reg != 0 && phy_reg != 0xFFFF)
+			break;
+		mdelay(1);
+	}
+
+	if (phy_reg <= 0 || phy_reg == 0xFFFF)
+		return 0;
+
+	phy_id = (phy_reg & 0xffff) << 16;
+
+	phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
+	if (phy_reg < 0)
+		return 0;
+
+	phy_id |= (phy_reg & 0xffff);
+
+	return phy_id;
+}
+
+static void
+sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt;
+
+	if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+		wolinfo->supported = 0;
+		wolinfo->wolopts = 0;
+		return;
+	}
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = 0;
+	if (opt & SR_MONITOR_LINK)
+		wolinfo->wolopts |= WAKE_PHY;
+	if (opt & SR_MONITOR_MAGIC)
+		wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int
+sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt = 0;
+
+	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
+	if (wolinfo->wolopts & WAKE_PHY)
+		opt |= SR_MONITOR_LINK;
+	if (wolinfo->wolopts & WAKE_MAGIC)
+		opt |= SR_MONITOR_MAGIC;
+
+	if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE,
+			 opt, 0, 0, NULL) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int sr_get_eeprom_len(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct sr_data *data = (struct sr_data *)&dev->data;
+
+	return data->eeprom_len;
+}
+
+static int sr_get_eeprom(struct net_device *net,
+			      struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	__le16 *ebuf = (__le16 *)data;
+	int ret;
+	int i;
+
+	/* Crude hack to ensure that we don't overwrite memory
+	 * if an odd length is supplied
+	 */
+	if (eeprom->len % 2)
+		return -EINVAL;
+
+	eeprom->magic = SR_EEPROM_MAGIC;
+
+	/* sr9800 returns 2 bytes from eeprom on read */
+	for (i = 0; i < eeprom->len / 2; i++) {
+		ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i,
+				  0, 2, &ebuf[i]);
+		if (ret < 0)
+			return -EINVAL;
+	}
+	return 0;
+}
+
+static void sr_get_drvinfo(struct net_device *net,
+				 struct ethtool_drvinfo *info)
+{
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+	strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
+}
+
+static u32 sr_get_link(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return mii_link_ok(&dev->mii);
+}
+
+static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static int sr_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct sr_data *data = (struct sr_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	eth_hw_addr_set(net, addr->sa_data);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later
+	 */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+			   data->mac_addr);
+
+	return 0;
+}
+
+static const struct ethtool_ops sr9800_ethtool_ops = {
+	.get_drvinfo	= sr_get_drvinfo,
+	.get_link	= sr_get_link,
+	.get_msglevel	= usbnet_get_msglevel,
+	.set_msglevel	= usbnet_set_msglevel,
+	.get_wol	= sr_get_wol,
+	.set_wol	= sr_set_wol,
+	.get_eeprom_len	= sr_get_eeprom_len,
+	.get_eeprom	= sr_get_eeprom,
+	.nway_reset	= usbnet_nway_reset,
+	.get_link_ksettings	= usbnet_get_link_ksettings_mii,
+	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
+};
+
+static int sr9800_link_reset(struct usbnet *dev)
+{
+	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+	u16 mode;
+
+	mii_check_media(&dev->mii, 1, 1);
+	mii_ethtool_gset(&dev->mii, &ecmd);
+	mode = SR9800_MEDIUM_DEFAULT;
+
+	if (ethtool_cmd_speed(&ecmd) != SPEED_100)
+		mode &= ~SR_MEDIUM_PS;
+
+	if (ecmd.duplex != DUPLEX_FULL)
+		mode &= ~SR_MEDIUM_FD;
+
+	netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n",
+		   __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
+
+	sr_write_medium_mode(dev, mode);
+
+	return 0;
+}
+
+
+static int sr9800_set_default_mode(struct usbnet *dev)
+{
+	u16 rx_ctl;
+	int ret;
+
+	sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+		      ADVERTISE_ALL | ADVERTISE_CSMA);
+	mii_nway_restart(&dev->mii);
+
+	ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT);
+	if (ret < 0)
+		goto out;
+
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012,
+				SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT,
+				SR9800_IPG2_DEFAULT, 0, NULL);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+		goto out;
+	}
+
+	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
+	ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+		   rx_ctl);
+
+	rx_ctl = sr_read_medium_status(dev);
+	netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n",
+		   rx_ctl);
+
+	return 0;
+out:
+	return ret;
+}
+
+static int sr9800_reset(struct usbnet *dev)
+{
+	struct sr_data *data = (struct sr_data *)&dev->data;
+	int ret, embd_phy;
+	u16 rx_ctl;
+
+	ret = sr_write_gpio(dev,
+			SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5);
+	if (ret < 0)
+		goto out;
+
+	embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+
+	ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		goto out;
+	}
+
+	ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	if (embd_phy) {
+		ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+		if (ret < 0)
+			goto out;
+	} else {
+		ret = sr_sw_reset(dev, SR_SWRESET_PRTE);
+		if (ret < 0)
+			goto out;
+	}
+
+	msleep(150);
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+	ret = sr_write_rx_ctl(dev, 0x0000);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+	ret = sr_sw_reset(dev, SR_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL);
+	if (ret < 0)
+		goto out;
+
+	msleep(150);
+
+	ret = sr9800_set_default_mode(dev);
+	if (ret < 0)
+		goto out;
+
+	/* Rewrite MAC address */
+	memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+	ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+	if (ret < 0)
+		goto out;
+
+	return 0;
+
+out:
+	return ret;
+}
+
+static const struct net_device_ops sr9800_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address	= sr_set_mac_address,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_eth_ioctl		= sr_ioctl,
+	.ndo_set_rx_mode        = sr_set_multicast,
+};
+
+static int sr9800_phy_powerup(struct usbnet *dev)
+{
+	int ret;
+
+	/* set the embedded Ethernet PHY in power-down state */
+	ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to power down PHY : %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	/* set the embedded Ethernet PHY in power-up state */
+	ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
+		return ret;
+	}
+	msleep(600);
+
+	/* set the embedded Ethernet PHY in reset state */
+	ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to power up PHY: %d\n", ret);
+		return ret;
+	}
+	msleep(20);
+
+	/* set the embedded Ethernet PHY in power-up state */
+	ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+	if (ret < 0) {
+		netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct sr_data *data = (struct sr_data *)&dev->data;
+	u16 led01_mux, led23_mux;
+	int ret, embd_phy;
+	u8 addr[ETH_ALEN];
+	u32 phyid;
+	u16 rx_ctl;
+
+	data->eeprom_len = SR9800_EEPROM_LEN;
+
+	usbnet_get_endpoints(dev, intf);
+
+	/* LED Setting Rule :
+	 * AABB:CCDD
+	 * AA : MFA0(LED0)
+	 * BB : MFA1(LED1)
+	 * CC : MFA2(LED2), Reserved for SR9800
+	 * DD : MFA3(LED3), Reserved for SR9800
+	 */
+	led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK;
+	led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE;
+	ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL);
+	if (ret < 0) {
+			netdev_err(dev->net, "set LINK LED failed : %d\n", ret);
+			goto out;
+	}
+
+	/* Get the MAC address */
+	ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, addr);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
+		return ret;
+	}
+	eth_hw_addr_set(dev->net, addr);
+	netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr);
+
+	/* Initialize MII structure */
+	dev->mii.dev = dev->net;
+	dev->mii.mdio_read = sr_mdio_read;
+	dev->mii.mdio_write = sr_mdio_write;
+	dev->mii.phy_id_mask = 0x1f;
+	dev->mii.reg_num_mask = 0x1f;
+	dev->mii.phy_id = sr_get_phy_addr(dev);
+
+	dev->net->netdev_ops = &sr9800_netdev_ops;
+	dev->net->ethtool_ops = &sr9800_ethtool_ops;
+
+	embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+	/* Reset the PHY to normal operation mode */
+	ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+	if (ret < 0) {
+		netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+		return ret;
+	}
+
+	/* Init PHY routine */
+	ret = sr9800_phy_powerup(dev);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+	ret = sr_write_rx_ctl(dev, 0x0000);
+	if (ret < 0)
+		goto out;
+
+	rx_ctl = sr_read_rx_ctl(dev);
+	netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+	/* Read PHYID register *AFTER* the PHY was reset properly */
+	phyid = sr_get_phyid(dev);
+	netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
+
+	/* medium mode setting */
+	ret = sr9800_set_default_mode(dev);
+	if (ret < 0)
+		goto out;
+
+	if (dev->udev->speed == USB_SPEED_HIGH) {
+		ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt,
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold,
+			0, NULL);
+		if (ret < 0) {
+			netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
+			goto out;
+		}
+		dev->rx_urb_size =
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size;
+	} else {
+		ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt,
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold,
+			0, NULL);
+		if (ret < 0) {
+			netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
+			goto out;
+		}
+		dev->rx_urb_size =
+			SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size;
+	}
+	netdev_dbg(dev->net, "%s : setting rx_urb_size with : %zu\n", __func__,
+		   dev->rx_urb_size);
+	return 0;
+
+out:
+	return ret;
+}
+
+static const struct driver_info sr9800_driver_info = {
+	.description	= "CoreChip SR9800 USB 2.0 Ethernet",
+	.bind		= sr9800_bind,
+	.status		= sr_status,
+	.link_reset	= sr9800_link_reset,
+	.reset		= sr9800_reset,
+	.flags		= DRIVER_FLAG,
+	.rx_fixup	= sr_rx_fixup,
+	.tx_fixup	= sr_tx_fixup,
+};
+
+static const struct usb_device_id	products[] = {
+	{
+		USB_DEVICE(0x0fe6, 0x9800),	/* SR9800 Device  */
+		.driver_info = (unsigned long) &sr9800_driver_info,
+	},
+	{},		/* END */
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver sr_driver = {
+	.name		= DRIVER_NAME,
+	.id_table	= products,
+	.probe		= usbnet_probe,
+	.suspend	= usbnet_suspend,
+	.resume		= usbnet_resume,
+	.disconnect	= usbnet_disconnect,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(sr_driver);
+
+MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/sr9800.h b/drivers/net/usb/sr9800.h
new file mode 100644
index 000000000..952e6f7c0
--- /dev/null
+++ b/drivers/net/usb/sr9800.h
@@ -0,0 +1,202 @@
+/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef	_SR9800_H
+#define	_SR9800_H
+
+/* SR9800 spec. command table on Linux Platform */
+
+/* command : Software Station Management Control Reg */
+#define SR_CMD_SET_SW_MII		0x06
+/* command : PHY Read Reg */
+#define SR_CMD_READ_MII_REG		0x07
+/* command : PHY Write Reg */
+#define SR_CMD_WRITE_MII_REG		0x08
+/* command : Hardware Station Management Control Reg */
+#define SR_CMD_SET_HW_MII		0x0a
+/* command : SROM Read Reg */
+#define SR_CMD_READ_EEPROM		0x0b
+/* command : SROM Write Reg */
+#define SR_CMD_WRITE_EEPROM		0x0c
+/* command : SROM Write Enable Reg */
+#define SR_CMD_WRITE_ENABLE		0x0d
+/* command : SROM Write Disable Reg */
+#define SR_CMD_WRITE_DISABLE		0x0e
+/* command : RX Control Read Reg */
+#define SR_CMD_READ_RX_CTL		0x0f
+#define		SR_RX_CTL_PRO			(1 << 0)
+#define		SR_RX_CTL_AMALL			(1 << 1)
+#define		SR_RX_CTL_SEP			(1 << 2)
+#define		SR_RX_CTL_AB			(1 << 3)
+#define		SR_RX_CTL_AM			(1 << 4)
+#define		SR_RX_CTL_AP			(1 << 5)
+#define		SR_RX_CTL_ARP			(1 << 6)
+#define		SR_RX_CTL_SO			(1 << 7)
+#define		SR_RX_CTL_RH1M			(1 << 8)
+#define		SR_RX_CTL_RH2M			(1 << 9)
+#define		SR_RX_CTL_RH3M			(1 << 10)
+/* command : RX Control Write Reg */
+#define SR_CMD_WRITE_RX_CTL		0x10
+/* command : IPG0/IPG1/IPG2 Control Read Reg */
+#define SR_CMD_READ_IPG012		0x11
+/* command : IPG0/IPG1/IPG2 Control Write Reg */
+#define SR_CMD_WRITE_IPG012		0x12
+/* command : Node ID Read Reg */
+#define SR_CMD_READ_NODE_ID		0x13
+/* command : Node ID Write Reg */
+#define SR_CMD_WRITE_NODE_ID		0x14
+/* command : Multicast Filter Array Read Reg */
+#define	SR_CMD_READ_MULTI_FILTER	0x15
+/* command : Multicast Filter Array Write Reg */
+#define SR_CMD_WRITE_MULTI_FILTER	0x16
+/* command : Eth/HomePNA PHY Address Reg */
+#define SR_CMD_READ_PHY_ID		0x19
+/* command : Medium Status Read Reg */
+#define SR_CMD_READ_MEDIUM_STATUS	0x1a
+#define		SR_MONITOR_LINK			(1 << 1)
+#define		SR_MONITOR_MAGIC		(1 << 2)
+#define		SR_MONITOR_HSFS			(1 << 4)
+/* command : Medium Status Write Reg */
+#define SR_CMD_WRITE_MEDIUM_MODE	0x1b
+#define		SR_MEDIUM_GM			(1 << 0)
+#define		SR_MEDIUM_FD			(1 << 1)
+#define		SR_MEDIUM_AC			(1 << 2)
+#define		SR_MEDIUM_ENCK			(1 << 3)
+#define		SR_MEDIUM_RFC			(1 << 4)
+#define		SR_MEDIUM_TFC			(1 << 5)
+#define		SR_MEDIUM_JFE			(1 << 6)
+#define		SR_MEDIUM_PF			(1 << 7)
+#define		SR_MEDIUM_RE			(1 << 8)
+#define		SR_MEDIUM_PS			(1 << 9)
+#define		SR_MEDIUM_RSV			(1 << 10)
+#define		SR_MEDIUM_SBP			(1 << 11)
+#define		SR_MEDIUM_SM			(1 << 12)
+/* command : Monitor Mode Status Read Reg */
+#define SR_CMD_READ_MONITOR_MODE	0x1c
+/* command : Monitor Mode Status Write Reg */
+#define SR_CMD_WRITE_MONITOR_MODE	0x1d
+/* command : GPIO Status Read Reg */
+#define SR_CMD_READ_GPIOS		0x1e
+#define		SR_GPIO_GPO0EN		(1 << 0) /* GPIO0 Output enable */
+#define		SR_GPIO_GPO_0		(1 << 1) /* GPIO0 Output value */
+#define		SR_GPIO_GPO1EN		(1 << 2) /* GPIO1 Output enable */
+#define		SR_GPIO_GPO_1		(1 << 3) /* GPIO1 Output value */
+#define		SR_GPIO_GPO2EN		(1 << 4) /* GPIO2 Output enable */
+#define		SR_GPIO_GPO_2		(1 << 5) /* GPIO2 Output value */
+#define		SR_GPIO_RESERVED	(1 << 6) /* Reserved */
+#define		SR_GPIO_RSE		(1 << 7) /* Reload serial EEPROM */
+/* command : GPIO Status Write Reg */
+#define SR_CMD_WRITE_GPIOS		0x1f
+/* command : Eth PHY Power and Reset Control Reg */
+#define SR_CMD_SW_RESET			0x20
+#define		SR_SWRESET_CLEAR		0x00
+#define		SR_SWRESET_RR			(1 << 0)
+#define		SR_SWRESET_RT			(1 << 1)
+#define		SR_SWRESET_PRTE			(1 << 2)
+#define		SR_SWRESET_PRL			(1 << 3)
+#define		SR_SWRESET_BZ			(1 << 4)
+#define		SR_SWRESET_IPRL			(1 << 5)
+#define		SR_SWRESET_IPPD			(1 << 6)
+/* command : Software Interface Selection Status Read Reg */
+#define SR_CMD_SW_PHY_STATUS		0x21
+/* command : Software Interface Selection Status Write Reg */
+#define SR_CMD_SW_PHY_SELECT		0x22
+/* command : BULK in Buffer Size Reg */
+#define	SR_CMD_BULKIN_SIZE		0x2A
+/* command : LED_MUX Control Reg */
+#define	SR_CMD_LED_MUX			0x70
+#define		SR_LED_MUX_TX_ACTIVE		(1 << 0)
+#define		SR_LED_MUX_RX_ACTIVE		(1 << 1)
+#define		SR_LED_MUX_COLLISION		(1 << 2)
+#define		SR_LED_MUX_DUP_COL		(1 << 3)
+#define		SR_LED_MUX_DUP			(1 << 4)
+#define		SR_LED_MUX_SPEED		(1 << 5)
+#define		SR_LED_MUX_LINK_ACTIVE		(1 << 6)
+#define		SR_LED_MUX_LINK			(1 << 7)
+
+/* Register Access Flags */
+#define SR_REQ_RD_REG   (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+#define SR_REQ_WR_REG   (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+
+/* Multicast Filter Array size & Max Number */
+#define	SR_MCAST_FILTER_SIZE		8
+#define	SR_MAX_MCAST			64
+
+/* IPG0/1/2 Default Value */
+#define	SR9800_IPG0_DEFAULT		0x15
+#define	SR9800_IPG1_DEFAULT		0x0c
+#define	SR9800_IPG2_DEFAULT		0x12
+
+/* Medium Status Default Mode */
+#define SR9800_MEDIUM_DEFAULT	\
+	(SR_MEDIUM_FD | SR_MEDIUM_RFC | \
+	 SR_MEDIUM_TFC | SR_MEDIUM_PS | \
+	 SR_MEDIUM_AC | SR_MEDIUM_RE)
+
+/* RX Control Default Setting */
+#define SR_DEFAULT_RX_CTL	\
+	(SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M)
+
+/* EEPROM Magic Number & EEPROM Size */
+#define SR_EEPROM_MAGIC			0xdeadbeef
+#define SR9800_EEPROM_LEN		0xff
+
+/* SR9800 Driver Version and Driver Name */
+#define DRIVER_VERSION			"11-Nov-2013"
+#define DRIVER_NAME			"CoreChips"
+#define	DRIVER_FLAG		\
+	(FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |  FLAG_MULTI_PACKET)
+
+/* SR9800 BULKIN Buffer Size */
+#define SR9800_MAX_BULKIN_2K		0
+#define SR9800_MAX_BULKIN_4K		1
+#define SR9800_MAX_BULKIN_6K		2
+#define SR9800_MAX_BULKIN_8K		3
+#define SR9800_MAX_BULKIN_16K		4
+#define SR9800_MAX_BULKIN_20K		5
+#define SR9800_MAX_BULKIN_24K		6
+#define SR9800_MAX_BULKIN_32K		7
+
+static const struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = {
+	/* 2k */
+	{2048, 0x8000, 0x8001},
+	/* 4k */
+	{4096, 0x8100, 0x8147},
+	/* 6k */
+	{6144, 0x8200, 0x81EB},
+	/* 8k */
+	{8192, 0x8300, 0x83D7},
+	/* 16 */
+	{16384, 0x8400, 0x851E},
+	/* 20k */
+	{20480, 0x8500, 0x8666},
+	/* 24k */
+	{24576, 0x8600, 0x87AE},
+	/* 32k */
+	{32768, 0x8700, 0x8A3D},
+};
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct sr_data {
+	u8 multi_filter[SR_MCAST_FILTER_SIZE];
+	u8 mac_addr[ETH_ALEN];
+	u8 phymode;
+	u8 ledmode;
+	u8 eeprom_len;
+};
+
+struct sr9800_int_data {
+	__le16 res1;
+	u8 link;
+	__le16 res2;
+	u8 status;
+	__le16 res3;
+} __packed;
+
+#endif	/* _SR9800_H */
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
new file mode 100644
index 000000000..405e588f8
--- /dev/null
+++ b/drivers/net/usb/usbnet.c
@@ -0,0 +1,2227 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * USB Network driver infrastructure
+ * Copyright (C) 2000-2005 by David Brownell
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ */
+
+/*
+ * This is a generic "USB networking" framework that works with several
+ * kinds of full and high speed networking devices:  host-to-host cables,
+ * smart usb peripherals, and actual Ethernet adapters.
+ *
+ * These devices usually differ in terms of control protocols (if they
+ * even have one!) and sometimes they define new framing to wrap or batch
+ * Ethernet packets.  Otherwise, they talk to USB pretty much the same,
+ * so interface (un)binding, endpoint I/O queues, fault handling, and other
+ * issues can usefully be addressed by this framework.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/pm_runtime.h>
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
+ * Several dozen bytes of IPv4 data can fit in two such transactions.
+ * One maximum size Ethernet packet takes twenty four of them.
+ * For high speed, each frame comfortably fits almost 36 max size
+ * Ethernet packets (so queues should be bigger).
+ *
+ * The goal is to let the USB host controller be busy for 5msec or
+ * more before an irq is required, under load.  Jumbograms change
+ * the equation.
+ */
+#define	MAX_QUEUE_MEMORY	(60 * 1518)
+#define	RX_QLEN(dev)		((dev)->rx_qlen)
+#define	TX_QLEN(dev)		((dev)->tx_qlen)
+
+// reawaken network queue this soon after stopping; else watchdog barks
+#define TX_TIMEOUT_JIFFIES	(5*HZ)
+
+/* throttle rx/tx briefly after some faults, so hub_wq might disconnect()
+ * us (it polls at HZ/4 usually) before we report too many false errors.
+ */
+#define THROTTLE_JIFFIES	(HZ/8)
+
+// between wakeups
+#define UNLINK_TIMEOUT_MS	3
+
+/*-------------------------------------------------------------------------*/
+
+// randomly generated ethernet address
+static u8	node_id [ETH_ALEN];
+
+/* use ethtool to change the level for any given device */
+static int msg_level = -1;
+module_param (msg_level, int, 0);
+MODULE_PARM_DESC (msg_level, "Override default message level");
+
+/*-------------------------------------------------------------------------*/
+
+static const char * const usbnet_event_names[] = {
+	[EVENT_TX_HALT]		   = "EVENT_TX_HALT",
+	[EVENT_RX_HALT]		   = "EVENT_RX_HALT",
+	[EVENT_RX_MEMORY]	   = "EVENT_RX_MEMORY",
+	[EVENT_STS_SPLIT]	   = "EVENT_STS_SPLIT",
+	[EVENT_LINK_RESET]	   = "EVENT_LINK_RESET",
+	[EVENT_RX_PAUSED]	   = "EVENT_RX_PAUSED",
+	[EVENT_DEV_ASLEEP]	   = "EVENT_DEV_ASLEEP",
+	[EVENT_DEV_OPEN]	   = "EVENT_DEV_OPEN",
+	[EVENT_DEVICE_REPORT_IDLE] = "EVENT_DEVICE_REPORT_IDLE",
+	[EVENT_NO_RUNTIME_PM]	   = "EVENT_NO_RUNTIME_PM",
+	[EVENT_RX_KILL]		   = "EVENT_RX_KILL",
+	[EVENT_LINK_CHANGE]	   = "EVENT_LINK_CHANGE",
+	[EVENT_SET_RX_MODE]	   = "EVENT_SET_RX_MODE",
+	[EVENT_NO_IP_ALIGN]	   = "EVENT_NO_IP_ALIGN",
+};
+
+/* handles CDC Ethernet and many other network "bulk data" interfaces */
+int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
+{
+	int				tmp;
+	struct usb_host_interface	*alt = NULL;
+	struct usb_host_endpoint	*in = NULL, *out = NULL;
+	struct usb_host_endpoint	*status = NULL;
+
+	for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
+		unsigned	ep;
+
+		in = out = status = NULL;
+		alt = intf->altsetting + tmp;
+
+		/* take the first altsetting with in-bulk + out-bulk;
+		 * remember any status endpoint, just in case;
+		 * ignore other endpoints and altsettings.
+		 */
+		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
+			struct usb_host_endpoint	*e;
+			int				intr = 0;
+
+			e = alt->endpoint + ep;
+
+			/* ignore endpoints which cannot transfer data */
+			if (!usb_endpoint_maxp(&e->desc))
+				continue;
+
+			switch (e->desc.bmAttributes) {
+			case USB_ENDPOINT_XFER_INT:
+				if (!usb_endpoint_dir_in(&e->desc))
+					continue;
+				intr = 1;
+				fallthrough;
+			case USB_ENDPOINT_XFER_BULK:
+				break;
+			default:
+				continue;
+			}
+			if (usb_endpoint_dir_in(&e->desc)) {
+				if (!intr && !in)
+					in = e;
+				else if (intr && !status)
+					status = e;
+			} else {
+				if (!out)
+					out = e;
+			}
+		}
+		if (in && out)
+			break;
+	}
+	if (!alt || !in || !out)
+		return -EINVAL;
+
+	if (alt->desc.bAlternateSetting != 0 ||
+	    !(dev->driver_info->flags & FLAG_NO_SETINT)) {
+		tmp = usb_set_interface (dev->udev, alt->desc.bInterfaceNumber,
+				alt->desc.bAlternateSetting);
+		if (tmp < 0)
+			return tmp;
+	}
+
+	dev->in = usb_rcvbulkpipe (dev->udev,
+			in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+	dev->out = usb_sndbulkpipe (dev->udev,
+			out->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+	dev->status = status;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_endpoints);
+
+int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
+{
+	u8		addr[ETH_ALEN];
+	int 		tmp = -1, ret;
+	unsigned char	buf [13];
+
+	ret = usb_string(dev->udev, iMACAddress, buf, sizeof buf);
+	if (ret == 12)
+		tmp = hex2bin(addr, buf, 6);
+	if (tmp < 0) {
+		dev_dbg(&dev->udev->dev,
+			"bad MAC string %d fetch, %d\n", iMACAddress, tmp);
+		if (ret >= 0)
+			ret = -EINVAL;
+		return ret;
+	}
+	eth_hw_addr_set(dev->net, addr);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
+
+static void intr_complete (struct urb *urb)
+{
+	struct usbnet	*dev = urb->context;
+	int		status = urb->status;
+
+	switch (status) {
+	/* success */
+	case 0:
+		dev->driver_info->status(dev, urb);
+		break;
+
+	/* software-driven interface shutdown */
+	case -ENOENT:		/* urb killed */
+	case -ESHUTDOWN:	/* hardware gone */
+		netif_dbg(dev, ifdown, dev->net,
+			  "intr shutdown, code %d\n", status);
+		return;
+
+	/* NOTE:  not throttling like RX/TX, since this endpoint
+	 * already polls infrequently
+	 */
+	default:
+		netdev_dbg(dev->net, "intr status %d\n", status);
+		break;
+	}
+
+	status = usb_submit_urb (urb, GFP_ATOMIC);
+	if (status != 0)
+		netif_err(dev, timer, dev->net,
+			  "intr resubmit --> %d\n", status);
+}
+
+static int init_status (struct usbnet *dev, struct usb_interface *intf)
+{
+	char		*buf = NULL;
+	unsigned	pipe = 0;
+	unsigned	maxp;
+	unsigned	period;
+
+	if (!dev->driver_info->status)
+		return 0;
+
+	pipe = usb_rcvintpipe (dev->udev,
+			dev->status->desc.bEndpointAddress
+				& USB_ENDPOINT_NUMBER_MASK);
+	maxp = usb_maxpacket(dev->udev, pipe);
+
+	/* avoid 1 msec chatter:  min 8 msec poll rate */
+	period = max ((int) dev->status->desc.bInterval,
+		(dev->udev->speed == USB_SPEED_HIGH) ? 7 : 3);
+
+	buf = kmalloc (maxp, GFP_KERNEL);
+	if (buf) {
+		dev->interrupt = usb_alloc_urb (0, GFP_KERNEL);
+		if (!dev->interrupt) {
+			kfree (buf);
+			return -ENOMEM;
+		} else {
+			usb_fill_int_urb(dev->interrupt, dev->udev, pipe,
+				buf, maxp, intr_complete, dev, period);
+			dev->interrupt->transfer_flags |= URB_FREE_BUFFER;
+			dev_dbg(&intf->dev,
+				"status ep%din, %d bytes period %d\n",
+				usb_pipeendpoint(pipe), maxp, period);
+		}
+	}
+	return 0;
+}
+
+/* Submit the interrupt URB if not previously submitted, increasing refcount */
+int usbnet_status_start(struct usbnet *dev, gfp_t mem_flags)
+{
+	int ret = 0;
+
+	WARN_ON_ONCE(dev->interrupt == NULL);
+	if (dev->interrupt) {
+		mutex_lock(&dev->interrupt_mutex);
+
+		if (++dev->interrupt_count == 1)
+			ret = usb_submit_urb(dev->interrupt, mem_flags);
+
+		dev_dbg(&dev->udev->dev, "incremented interrupt URB count to %d\n",
+			dev->interrupt_count);
+		mutex_unlock(&dev->interrupt_mutex);
+	}
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usbnet_status_start);
+
+/* For resume; submit interrupt URB if previously submitted */
+static int __usbnet_status_start_force(struct usbnet *dev, gfp_t mem_flags)
+{
+	int ret = 0;
+
+	mutex_lock(&dev->interrupt_mutex);
+	if (dev->interrupt_count) {
+		ret = usb_submit_urb(dev->interrupt, mem_flags);
+		dev_dbg(&dev->udev->dev,
+			"submitted interrupt URB for resume\n");
+	}
+	mutex_unlock(&dev->interrupt_mutex);
+	return ret;
+}
+
+/* Kill the interrupt URB if all submitters want it killed */
+void usbnet_status_stop(struct usbnet *dev)
+{
+	if (dev->interrupt) {
+		mutex_lock(&dev->interrupt_mutex);
+		WARN_ON(dev->interrupt_count == 0);
+
+		if (dev->interrupt_count && --dev->interrupt_count == 0)
+			usb_kill_urb(dev->interrupt);
+
+		dev_dbg(&dev->udev->dev,
+			"decremented interrupt URB count to %d\n",
+			dev->interrupt_count);
+		mutex_unlock(&dev->interrupt_mutex);
+	}
+}
+EXPORT_SYMBOL_GPL(usbnet_status_stop);
+
+/* For suspend; always kill interrupt URB */
+static void __usbnet_status_stop_force(struct usbnet *dev)
+{
+	if (dev->interrupt) {
+		mutex_lock(&dev->interrupt_mutex);
+		usb_kill_urb(dev->interrupt);
+		dev_dbg(&dev->udev->dev, "killed interrupt URB for suspend\n");
+		mutex_unlock(&dev->interrupt_mutex);
+	}
+}
+
+/* Passes this packet up the stack, updating its accounting.
+ * Some link protocols batch packets, so their rx_fixup paths
+ * can return clones as well as just modify the original skb.
+ */
+void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
+{
+	struct pcpu_sw_netstats *stats64 = this_cpu_ptr(dev->net->tstats);
+	unsigned long flags;
+	int	status;
+
+	if (test_bit(EVENT_RX_PAUSED, &dev->flags)) {
+		skb_queue_tail(&dev->rxq_pause, skb);
+		return;
+	}
+
+	/* only update if unset to allow minidriver rx_fixup override */
+	if (skb->protocol == 0)
+		skb->protocol = eth_type_trans (skb, dev->net);
+
+	flags = u64_stats_update_begin_irqsave(&stats64->syncp);
+	u64_stats_inc(&stats64->rx_packets);
+	u64_stats_add(&stats64->rx_bytes, skb->len);
+	u64_stats_update_end_irqrestore(&stats64->syncp, flags);
+
+	netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
+		  skb->len + sizeof (struct ethhdr), skb->protocol);
+	memset (skb->cb, 0, sizeof (struct skb_data));
+
+	if (skb_defer_rx_timestamp(skb))
+		return;
+
+	status = netif_rx (skb);
+	if (status != NET_RX_SUCCESS)
+		netif_dbg(dev, rx_err, dev->net,
+			  "netif_rx status %d\n", status);
+}
+EXPORT_SYMBOL_GPL(usbnet_skb_return);
+
+/* must be called if hard_mtu or rx_urb_size changed */
+void usbnet_update_max_qlen(struct usbnet *dev)
+{
+	enum usb_device_speed speed = dev->udev->speed;
+
+	if (!dev->rx_urb_size || !dev->hard_mtu)
+		goto insanity;
+	switch (speed) {
+	case USB_SPEED_HIGH:
+		dev->rx_qlen = MAX_QUEUE_MEMORY / dev->rx_urb_size;
+		dev->tx_qlen = MAX_QUEUE_MEMORY / dev->hard_mtu;
+		break;
+	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
+		/*
+		 * Not take default 5ms qlen for super speed HC to
+		 * save memory, and iperf tests show 2.5ms qlen can
+		 * work well
+		 */
+		dev->rx_qlen = 5 * MAX_QUEUE_MEMORY / dev->rx_urb_size;
+		dev->tx_qlen = 5 * MAX_QUEUE_MEMORY / dev->hard_mtu;
+		break;
+	default:
+insanity:
+		dev->rx_qlen = dev->tx_qlen = 4;
+	}
+}
+EXPORT_SYMBOL_GPL(usbnet_update_max_qlen);
+
+
+/*-------------------------------------------------------------------------
+ *
+ * Network Device Driver (peer link to "Host Device", from USB host)
+ *
+ *-------------------------------------------------------------------------*/
+
+int usbnet_change_mtu (struct net_device *net, int new_mtu)
+{
+	struct usbnet	*dev = netdev_priv(net);
+	int		ll_mtu = new_mtu + net->hard_header_len;
+	int		old_hard_mtu = dev->hard_mtu;
+	int		old_rx_urb_size = dev->rx_urb_size;
+
+	// no second zero-length packet read wanted after mtu-sized packets
+	if ((ll_mtu % dev->maxpacket) == 0)
+		return -EDOM;
+	net->mtu = new_mtu;
+
+	dev->hard_mtu = net->mtu + net->hard_header_len;
+	if (dev->rx_urb_size == old_hard_mtu) {
+		dev->rx_urb_size = dev->hard_mtu;
+		if (dev->rx_urb_size > old_rx_urb_size) {
+			usbnet_pause_rx(dev);
+			usbnet_unlink_rx_urbs(dev);
+			usbnet_resume_rx(dev);
+		}
+	}
+
+	/* max qlen depend on hard_mtu and rx_urb_size */
+	usbnet_update_max_qlen(dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_change_mtu);
+
+/* The caller must hold list->lock */
+static void __usbnet_queue_skb(struct sk_buff_head *list,
+			struct sk_buff *newsk, enum skb_state state)
+{
+	struct skb_data *entry = (struct skb_data *) newsk->cb;
+
+	__skb_queue_tail(list, newsk);
+	entry->state = state;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* some LK 2.4 HCDs oopsed if we freed or resubmitted urbs from
+ * completion callbacks.  2.5 should have fixed those bugs...
+ */
+
+static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb,
+		struct sk_buff_head *list, enum skb_state state)
+{
+	unsigned long		flags;
+	enum skb_state 		old_state;
+	struct skb_data *entry = (struct skb_data *) skb->cb;
+
+	spin_lock_irqsave(&list->lock, flags);
+	old_state = entry->state;
+	entry->state = state;
+	__skb_unlink(skb, list);
+
+	/* defer_bh() is never called with list == &dev->done.
+	 * spin_lock_nested() tells lockdep that it is OK to take
+	 * dev->done.lock here with list->lock held.
+	 */
+	spin_lock_nested(&dev->done.lock, SINGLE_DEPTH_NESTING);
+
+	__skb_queue_tail(&dev->done, skb);
+	if (dev->done.qlen == 1)
+		tasklet_schedule(&dev->bh);
+	spin_unlock(&dev->done.lock);
+	spin_unlock_irqrestore(&list->lock, flags);
+	return old_state;
+}
+
+/* some work can't be done in tasklets, so we use keventd
+ *
+ * NOTE:  annoying asymmetry:  if it's active, schedule_work() fails,
+ * but tasklet_schedule() doesn't.  hope the failure is rare.
+ */
+void usbnet_defer_kevent (struct usbnet *dev, int work)
+{
+	set_bit (work, &dev->flags);
+	if (!schedule_work (&dev->kevent))
+		netdev_dbg(dev->net, "kevent %s may have been dropped\n", usbnet_event_names[work]);
+	else
+		netdev_dbg(dev->net, "kevent %s scheduled\n", usbnet_event_names[work]);
+}
+EXPORT_SYMBOL_GPL(usbnet_defer_kevent);
+
+/*-------------------------------------------------------------------------*/
+
+static void rx_complete (struct urb *urb);
+
+static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
+{
+	struct sk_buff		*skb;
+	struct skb_data		*entry;
+	int			retval = 0;
+	unsigned long		lockflags;
+	size_t			size = dev->rx_urb_size;
+
+	/* prevent rx skb allocation when error ratio is high */
+	if (test_bit(EVENT_RX_KILL, &dev->flags)) {
+		usb_free_urb(urb);
+		return -ENOLINK;
+	}
+
+	if (test_bit(EVENT_NO_IP_ALIGN, &dev->flags))
+		skb = __netdev_alloc_skb(dev->net, size, flags);
+	else
+		skb = __netdev_alloc_skb_ip_align(dev->net, size, flags);
+	if (!skb) {
+		netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
+		usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
+		usb_free_urb (urb);
+		return -ENOMEM;
+	}
+
+	entry = (struct skb_data *) skb->cb;
+	entry->urb = urb;
+	entry->dev = dev;
+	entry->length = 0;
+
+	usb_fill_bulk_urb (urb, dev->udev, dev->in,
+		skb->data, size, rx_complete, skb);
+
+	spin_lock_irqsave (&dev->rxq.lock, lockflags);
+
+	if (netif_running (dev->net) &&
+	    netif_device_present (dev->net) &&
+	    test_bit(EVENT_DEV_OPEN, &dev->flags) &&
+	    !test_bit (EVENT_RX_HALT, &dev->flags) &&
+	    !test_bit (EVENT_DEV_ASLEEP, &dev->flags)) {
+		switch (retval = usb_submit_urb (urb, GFP_ATOMIC)) {
+		case -EPIPE:
+			usbnet_defer_kevent (dev, EVENT_RX_HALT);
+			break;
+		case -ENOMEM:
+			usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
+			break;
+		case -ENODEV:
+			netif_dbg(dev, ifdown, dev->net, "device gone\n");
+			netif_device_detach (dev->net);
+			break;
+		case -EHOSTUNREACH:
+			retval = -ENOLINK;
+			break;
+		default:
+			netif_dbg(dev, rx_err, dev->net,
+				  "rx submit, %d\n", retval);
+			tasklet_schedule (&dev->bh);
+			break;
+		case 0:
+			__usbnet_queue_skb(&dev->rxq, skb, rx_start);
+		}
+	} else {
+		netif_dbg(dev, ifdown, dev->net, "rx: stopped\n");
+		retval = -ENOLINK;
+	}
+	spin_unlock_irqrestore (&dev->rxq.lock, lockflags);
+	if (retval) {
+		dev_kfree_skb_any (skb);
+		usb_free_urb (urb);
+	}
+	return retval;
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
+{
+	if (dev->driver_info->rx_fixup &&
+	    !dev->driver_info->rx_fixup (dev, skb)) {
+		/* With RX_ASSEMBLE, rx_fixup() must update counters */
+		if (!(dev->driver_info->flags & FLAG_RX_ASSEMBLE))
+			dev->net->stats.rx_errors++;
+		goto done;
+	}
+	// else network stack removes extra byte if we forced a short packet
+
+	/* all data was already cloned from skb inside the driver */
+	if (dev->driver_info->flags & FLAG_MULTI_PACKET)
+		goto done;
+
+	if (skb->len < ETH_HLEN) {
+		dev->net->stats.rx_errors++;
+		dev->net->stats.rx_length_errors++;
+		netif_dbg(dev, rx_err, dev->net, "rx length %d\n", skb->len);
+	} else {
+		usbnet_skb_return(dev, skb);
+		return;
+	}
+
+done:
+	skb_queue_tail(&dev->done, skb);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void rx_complete (struct urb *urb)
+{
+	struct sk_buff		*skb = (struct sk_buff *) urb->context;
+	struct skb_data		*entry = (struct skb_data *) skb->cb;
+	struct usbnet		*dev = entry->dev;
+	int			urb_status = urb->status;
+	enum skb_state		state;
+
+	skb_put (skb, urb->actual_length);
+	state = rx_done;
+	entry->urb = NULL;
+
+	switch (urb_status) {
+	/* success */
+	case 0:
+		break;
+
+	/* stalls need manual reset. this is rare ... except that
+	 * when going through USB 2.0 TTs, unplug appears this way.
+	 * we avoid the highspeed version of the ETIMEDOUT/EILSEQ
+	 * storm, recovering as needed.
+	 */
+	case -EPIPE:
+		dev->net->stats.rx_errors++;
+		usbnet_defer_kevent (dev, EVENT_RX_HALT);
+		fallthrough;
+
+	/* software-driven interface shutdown */
+	case -ECONNRESET:		/* async unlink */
+	case -ESHUTDOWN:		/* hardware gone */
+		netif_dbg(dev, ifdown, dev->net,
+			  "rx shutdown, code %d\n", urb_status);
+		goto block;
+
+	/* we get controller i/o faults during hub_wq disconnect() delays.
+	 * throttle down resubmits, to avoid log floods; just temporarily,
+	 * so we still recover when the fault isn't a hub_wq delay.
+	 */
+	case -EPROTO:
+	case -ETIME:
+	case -EILSEQ:
+		dev->net->stats.rx_errors++;
+		if (!timer_pending (&dev->delay)) {
+			mod_timer (&dev->delay, jiffies + THROTTLE_JIFFIES);
+			netif_dbg(dev, link, dev->net,
+				  "rx throttle %d\n", urb_status);
+		}
+block:
+		state = rx_cleanup;
+		entry->urb = urb;
+		urb = NULL;
+		break;
+
+	/* data overrun ... flush fifo? */
+	case -EOVERFLOW:
+		dev->net->stats.rx_over_errors++;
+		fallthrough;
+
+	default:
+		state = rx_cleanup;
+		dev->net->stats.rx_errors++;
+		netif_dbg(dev, rx_err, dev->net, "rx status %d\n", urb_status);
+		break;
+	}
+
+	/* stop rx if packet error rate is high */
+	if (++dev->pkt_cnt > 30) {
+		dev->pkt_cnt = 0;
+		dev->pkt_err = 0;
+	} else {
+		if (state == rx_cleanup)
+			dev->pkt_err++;
+		if (dev->pkt_err > 20)
+			set_bit(EVENT_RX_KILL, &dev->flags);
+	}
+
+	state = defer_bh(dev, skb, &dev->rxq, state);
+
+	if (urb) {
+		if (netif_running (dev->net) &&
+		    !test_bit (EVENT_RX_HALT, &dev->flags) &&
+		    state != unlink_start) {
+			rx_submit (dev, urb, GFP_ATOMIC);
+			usb_mark_last_busy(dev->udev);
+			return;
+		}
+		usb_free_urb (urb);
+	}
+	netif_dbg(dev, rx_err, dev->net, "no read resubmitted\n");
+}
+
+/*-------------------------------------------------------------------------*/
+void usbnet_pause_rx(struct usbnet *dev)
+{
+	set_bit(EVENT_RX_PAUSED, &dev->flags);
+
+	netif_dbg(dev, rx_status, dev->net, "paused rx queue enabled\n");
+}
+EXPORT_SYMBOL_GPL(usbnet_pause_rx);
+
+void usbnet_resume_rx(struct usbnet *dev)
+{
+	struct sk_buff *skb;
+	int num = 0;
+
+	clear_bit(EVENT_RX_PAUSED, &dev->flags);
+
+	while ((skb = skb_dequeue(&dev->rxq_pause)) != NULL) {
+		usbnet_skb_return(dev, skb);
+		num++;
+	}
+
+	tasklet_schedule(&dev->bh);
+
+	netif_dbg(dev, rx_status, dev->net,
+		  "paused rx queue disabled, %d skbs requeued\n", num);
+}
+EXPORT_SYMBOL_GPL(usbnet_resume_rx);
+
+void usbnet_purge_paused_rxq(struct usbnet *dev)
+{
+	skb_queue_purge(&dev->rxq_pause);
+}
+EXPORT_SYMBOL_GPL(usbnet_purge_paused_rxq);
+
+/*-------------------------------------------------------------------------*/
+
+// unlink pending rx/tx; completion handlers do all other cleanup
+
+static int unlink_urbs (struct usbnet *dev, struct sk_buff_head *q)
+{
+	unsigned long		flags;
+	struct sk_buff		*skb;
+	int			count = 0;
+
+	spin_lock_irqsave (&q->lock, flags);
+	while (!skb_queue_empty(q)) {
+		struct skb_data		*entry;
+		struct urb		*urb;
+		int			retval;
+
+		skb_queue_walk(q, skb) {
+			entry = (struct skb_data *) skb->cb;
+			if (entry->state != unlink_start)
+				goto found;
+		}
+		break;
+found:
+		entry->state = unlink_start;
+		urb = entry->urb;
+
+		/*
+		 * Get reference count of the URB to avoid it to be
+		 * freed during usb_unlink_urb, which may trigger
+		 * use-after-free problem inside usb_unlink_urb since
+		 * usb_unlink_urb is always racing with .complete
+		 * handler(include defer_bh).
+		 */
+		usb_get_urb(urb);
+		spin_unlock_irqrestore(&q->lock, flags);
+		// during some PM-driven resume scenarios,
+		// these (async) unlinks complete immediately
+		retval = usb_unlink_urb (urb);
+		if (retval != -EINPROGRESS && retval != 0)
+			netdev_dbg(dev->net, "unlink urb err, %d\n", retval);
+		else
+			count++;
+		usb_put_urb(urb);
+		spin_lock_irqsave(&q->lock, flags);
+	}
+	spin_unlock_irqrestore (&q->lock, flags);
+	return count;
+}
+
+// Flush all pending rx urbs
+// minidrivers may need to do this when the MTU changes
+
+void usbnet_unlink_rx_urbs(struct usbnet *dev)
+{
+	if (netif_running(dev->net)) {
+		(void) unlink_urbs (dev, &dev->rxq);
+		tasklet_schedule(&dev->bh);
+	}
+}
+EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
+
+/*-------------------------------------------------------------------------*/
+
+static void wait_skb_queue_empty(struct sk_buff_head *q)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&q->lock, flags);
+	while (!skb_queue_empty(q)) {
+		spin_unlock_irqrestore(&q->lock, flags);
+		schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS));
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		spin_lock_irqsave(&q->lock, flags);
+	}
+	spin_unlock_irqrestore(&q->lock, flags);
+}
+
+// precondition: never called in_interrupt
+static void usbnet_terminate_urbs(struct usbnet *dev)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	int temp;
+
+	/* ensure there are no more active urbs */
+	add_wait_queue(&dev->wait, &wait);
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	temp = unlink_urbs(dev, &dev->txq) +
+		unlink_urbs(dev, &dev->rxq);
+
+	/* maybe wait for deletions to finish. */
+	wait_skb_queue_empty(&dev->rxq);
+	wait_skb_queue_empty(&dev->txq);
+	wait_skb_queue_empty(&dev->done);
+	netif_dbg(dev, ifdown, dev->net,
+		  "waited for %d urb completions\n", temp);
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&dev->wait, &wait);
+}
+
+int usbnet_stop (struct net_device *net)
+{
+	struct usbnet		*dev = netdev_priv(net);
+	const struct driver_info *info = dev->driver_info;
+	int			retval, pm, mpn;
+
+	clear_bit(EVENT_DEV_OPEN, &dev->flags);
+	netif_stop_queue (net);
+
+	netif_info(dev, ifdown, dev->net,
+		   "stop stats: rx/tx %lu/%lu, errs %lu/%lu\n",
+		   net->stats.rx_packets, net->stats.tx_packets,
+		   net->stats.rx_errors, net->stats.tx_errors);
+
+	/* to not race resume */
+	pm = usb_autopm_get_interface(dev->intf);
+	/* allow minidriver to stop correctly (wireless devices to turn off
+	 * radio etc) */
+	if (info->stop) {
+		retval = info->stop(dev);
+		if (retval < 0)
+			netif_info(dev, ifdown, dev->net,
+				   "stop fail (%d) usbnet usb-%s-%s, %s\n",
+				   retval,
+				   dev->udev->bus->bus_name, dev->udev->devpath,
+				   info->description);
+	}
+
+	if (!(info->flags & FLAG_AVOID_UNLINK_URBS))
+		usbnet_terminate_urbs(dev);
+
+	usbnet_status_stop(dev);
+
+	usbnet_purge_paused_rxq(dev);
+
+	mpn = !test_and_clear_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
+
+	/* deferred work (timer, softirq, task) must also stop */
+	dev->flags = 0;
+	del_timer_sync (&dev->delay);
+	tasklet_kill (&dev->bh);
+	cancel_work_sync(&dev->kevent);
+	if (!pm)
+		usb_autopm_put_interface(dev->intf);
+
+	if (info->manage_power && mpn)
+		info->manage_power(dev, 0);
+	else
+		usb_autopm_put_interface(dev->intf);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_stop);
+
+/*-------------------------------------------------------------------------*/
+
+// posts reads, and enables write queuing
+
+// precondition: never called in_interrupt
+
+int usbnet_open (struct net_device *net)
+{
+	struct usbnet		*dev = netdev_priv(net);
+	int			retval;
+	const struct driver_info *info = dev->driver_info;
+
+	if ((retval = usb_autopm_get_interface(dev->intf)) < 0) {
+		netif_info(dev, ifup, dev->net,
+			   "resumption fail (%d) usbnet usb-%s-%s, %s\n",
+			   retval,
+			   dev->udev->bus->bus_name,
+			   dev->udev->devpath,
+			   info->description);
+		goto done_nopm;
+	}
+
+	// put into "known safe" state
+	if (info->reset && (retval = info->reset (dev)) < 0) {
+		netif_info(dev, ifup, dev->net,
+			   "open reset fail (%d) usbnet usb-%s-%s, %s\n",
+			   retval,
+			   dev->udev->bus->bus_name,
+			   dev->udev->devpath,
+			   info->description);
+		goto done;
+	}
+
+	/* hard_mtu or rx_urb_size may change in reset() */
+	usbnet_update_max_qlen(dev);
+
+	// insist peer be connected
+	if (info->check_connect && (retval = info->check_connect (dev)) < 0) {
+		netif_err(dev, ifup, dev->net, "can't open; %d\n", retval);
+		goto done;
+	}
+
+	/* start any status interrupt transfer */
+	if (dev->interrupt) {
+		retval = usbnet_status_start(dev, GFP_KERNEL);
+		if (retval < 0) {
+			netif_err(dev, ifup, dev->net,
+				  "intr submit %d\n", retval);
+			goto done;
+		}
+	}
+
+	set_bit(EVENT_DEV_OPEN, &dev->flags);
+	netif_start_queue (net);
+	netif_info(dev, ifup, dev->net,
+		   "open: enable queueing (rx %d, tx %d) mtu %d %s framing\n",
+		   (int)RX_QLEN(dev), (int)TX_QLEN(dev),
+		   dev->net->mtu,
+		   (dev->driver_info->flags & FLAG_FRAMING_NC) ? "NetChip" :
+		   (dev->driver_info->flags & FLAG_FRAMING_GL) ? "GeneSys" :
+		   (dev->driver_info->flags & FLAG_FRAMING_Z) ? "Zaurus" :
+		   (dev->driver_info->flags & FLAG_FRAMING_RN) ? "RNDIS" :
+		   (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" :
+		   "simple");
+
+	/* reset rx error state */
+	dev->pkt_cnt = 0;
+	dev->pkt_err = 0;
+	clear_bit(EVENT_RX_KILL, &dev->flags);
+
+	// delay posting reads until we're fully open
+	tasklet_schedule (&dev->bh);
+	if (info->manage_power) {
+		retval = info->manage_power(dev, 1);
+		if (retval < 0) {
+			retval = 0;
+			set_bit(EVENT_NO_RUNTIME_PM, &dev->flags);
+		} else {
+			usb_autopm_put_interface(dev->intf);
+		}
+	}
+	return retval;
+done:
+	usb_autopm_put_interface(dev->intf);
+done_nopm:
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usbnet_open);
+
+/*-------------------------------------------------------------------------*/
+
+/* ethtool methods; minidrivers may need to add some more, but
+ * they'll probably want to use this base set.
+ */
+
+/* These methods are written on the assumption that the device
+ * uses MII
+ */
+int usbnet_get_link_ksettings_mii(struct net_device *net,
+			      struct ethtool_link_ksettings *cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	if (!dev->mii.mdio_read)
+		return -EOPNOTSUPP;
+
+	mii_ethtool_get_link_ksettings(&dev->mii, cmd);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_link_ksettings_mii);
+
+int usbnet_get_link_ksettings_internal(struct net_device *net,
+					struct ethtool_link_ksettings *cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	/* the assumption that speed is equal on tx and rx
+	 * is deeply engrained into the networking layer.
+	 * For wireless stuff it is not true.
+	 * We assume that rx_speed matters more.
+	 */
+	if (dev->rx_speed != SPEED_UNSET)
+		cmd->base.speed = dev->rx_speed / 1000000;
+	else if (dev->tx_speed != SPEED_UNSET)
+		cmd->base.speed = dev->tx_speed / 1000000;
+	else
+		cmd->base.speed = SPEED_UNKNOWN;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_link_ksettings_internal);
+
+int usbnet_set_link_ksettings_mii(struct net_device *net,
+			      const struct ethtool_link_ksettings *cmd)
+{
+	struct usbnet *dev = netdev_priv(net);
+	int retval;
+
+	if (!dev->mii.mdio_write)
+		return -EOPNOTSUPP;
+
+	retval = mii_ethtool_set_link_ksettings(&dev->mii, cmd);
+
+	/* link speed/duplex might have changed */
+	if (dev->driver_info->link_reset)
+		dev->driver_info->link_reset(dev);
+
+	/* hard_mtu or rx_urb_size may change in link_reset() */
+	usbnet_update_max_qlen(dev);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(usbnet_set_link_ksettings_mii);
+
+u32 usbnet_get_link (struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	/* If a check_connect is defined, return its result */
+	if (dev->driver_info->check_connect)
+		return dev->driver_info->check_connect (dev) == 0;
+
+	/* if the device has mii operations, use those */
+	if (dev->mii.mdio_read)
+		return mii_link_ok(&dev->mii);
+
+	/* Otherwise, dtrt for drivers calling netif_carrier_{on,off} */
+	return ethtool_op_get_link(net);
+}
+EXPORT_SYMBOL_GPL(usbnet_get_link);
+
+int usbnet_nway_reset(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	if (!dev->mii.mdio_write)
+		return -EOPNOTSUPP;
+
+	return mii_nway_restart(&dev->mii);
+}
+EXPORT_SYMBOL_GPL(usbnet_nway_reset);
+
+void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	strscpy(info->driver, dev->driver_name, sizeof(info->driver));
+	strscpy(info->fw_version, dev->driver_info->description,
+		sizeof(info->fw_version));
+	usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info);
+}
+EXPORT_SYMBOL_GPL(usbnet_get_drvinfo);
+
+u32 usbnet_get_msglevel (struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	return dev->msg_enable;
+}
+EXPORT_SYMBOL_GPL(usbnet_get_msglevel);
+
+void usbnet_set_msglevel (struct net_device *net, u32 level)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	dev->msg_enable = level;
+}
+EXPORT_SYMBOL_GPL(usbnet_set_msglevel);
+
+/* drivers may override default ethtool_ops in their bind() routine */
+static const struct ethtool_ops usbnet_ethtool_ops = {
+	.get_link		= usbnet_get_link,
+	.nway_reset		= usbnet_nway_reset,
+	.get_drvinfo		= usbnet_get_drvinfo,
+	.get_msglevel		= usbnet_get_msglevel,
+	.set_msglevel		= usbnet_set_msglevel,
+	.get_ts_info		= ethtool_op_get_ts_info,
+	.get_link_ksettings	= usbnet_get_link_ksettings_mii,
+	.set_link_ksettings	= usbnet_set_link_ksettings_mii,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static void __handle_link_change(struct usbnet *dev)
+{
+	if (!test_bit(EVENT_DEV_OPEN, &dev->flags))
+		return;
+
+	if (!netif_carrier_ok(dev->net)) {
+		/* kill URBs for reading packets to save bus bandwidth */
+		unlink_urbs(dev, &dev->rxq);
+
+		/*
+		 * tx_timeout will unlink URBs for sending packets and
+		 * tx queue is stopped by netcore after link becomes off
+		 */
+	} else {
+		/* submitting URBs for reading packets */
+		tasklet_schedule(&dev->bh);
+	}
+
+	/* hard_mtu or rx_urb_size may change during link change */
+	usbnet_update_max_qlen(dev);
+
+	clear_bit(EVENT_LINK_CHANGE, &dev->flags);
+}
+
+void usbnet_set_rx_mode(struct net_device *net)
+{
+	struct usbnet		*dev = netdev_priv(net);
+
+	usbnet_defer_kevent(dev, EVENT_SET_RX_MODE);
+}
+EXPORT_SYMBOL_GPL(usbnet_set_rx_mode);
+
+static void __handle_set_rx_mode(struct usbnet *dev)
+{
+	if (dev->driver_info->set_rx_mode)
+		(dev->driver_info->set_rx_mode)(dev);
+
+	clear_bit(EVENT_SET_RX_MODE, &dev->flags);
+}
+
+/* work that cannot be done in interrupt context uses keventd.
+ *
+ * NOTE:  with 2.5 we could do more of this using completion callbacks,
+ * especially now that control transfers can be queued.
+ */
+static void
+usbnet_deferred_kevent (struct work_struct *work)
+{
+	struct usbnet		*dev =
+		container_of(work, struct usbnet, kevent);
+	int			status;
+
+	/* usb_clear_halt() needs a thread context */
+	if (test_bit (EVENT_TX_HALT, &dev->flags)) {
+		unlink_urbs (dev, &dev->txq);
+		status = usb_autopm_get_interface(dev->intf);
+		if (status < 0)
+			goto fail_pipe;
+		status = usb_clear_halt (dev->udev, dev->out);
+		usb_autopm_put_interface(dev->intf);
+		if (status < 0 &&
+		    status != -EPIPE &&
+		    status != -ESHUTDOWN) {
+			if (netif_msg_tx_err (dev))
+fail_pipe:
+				netdev_err(dev->net, "can't clear tx halt, status %d\n",
+					   status);
+		} else {
+			clear_bit (EVENT_TX_HALT, &dev->flags);
+			if (status != -ESHUTDOWN)
+				netif_wake_queue (dev->net);
+		}
+	}
+	if (test_bit (EVENT_RX_HALT, &dev->flags)) {
+		unlink_urbs (dev, &dev->rxq);
+		status = usb_autopm_get_interface(dev->intf);
+		if (status < 0)
+			goto fail_halt;
+		status = usb_clear_halt (dev->udev, dev->in);
+		usb_autopm_put_interface(dev->intf);
+		if (status < 0 &&
+		    status != -EPIPE &&
+		    status != -ESHUTDOWN) {
+			if (netif_msg_rx_err (dev))
+fail_halt:
+				netdev_err(dev->net, "can't clear rx halt, status %d\n",
+					   status);
+		} else {
+			clear_bit (EVENT_RX_HALT, &dev->flags);
+			tasklet_schedule (&dev->bh);
+		}
+	}
+
+	/* tasklet could resubmit itself forever if memory is tight */
+	if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
+		struct urb	*urb = NULL;
+		int resched = 1;
+
+		if (netif_running (dev->net))
+			urb = usb_alloc_urb (0, GFP_KERNEL);
+		else
+			clear_bit (EVENT_RX_MEMORY, &dev->flags);
+		if (urb != NULL) {
+			clear_bit (EVENT_RX_MEMORY, &dev->flags);
+			status = usb_autopm_get_interface(dev->intf);
+			if (status < 0) {
+				usb_free_urb(urb);
+				goto fail_lowmem;
+			}
+			if (rx_submit (dev, urb, GFP_KERNEL) == -ENOLINK)
+				resched = 0;
+			usb_autopm_put_interface(dev->intf);
+fail_lowmem:
+			if (resched)
+				tasklet_schedule (&dev->bh);
+		}
+	}
+
+	if (test_bit (EVENT_LINK_RESET, &dev->flags)) {
+		const struct driver_info *info = dev->driver_info;
+		int			retval = 0;
+
+		clear_bit (EVENT_LINK_RESET, &dev->flags);
+		status = usb_autopm_get_interface(dev->intf);
+		if (status < 0)
+			goto skip_reset;
+		if(info->link_reset && (retval = info->link_reset(dev)) < 0) {
+			usb_autopm_put_interface(dev->intf);
+skip_reset:
+			netdev_info(dev->net, "link reset failed (%d) usbnet usb-%s-%s, %s\n",
+				    retval,
+				    dev->udev->bus->bus_name,
+				    dev->udev->devpath,
+				    info->description);
+		} else {
+			usb_autopm_put_interface(dev->intf);
+		}
+
+		/* handle link change from link resetting */
+		__handle_link_change(dev);
+	}
+
+	if (test_bit (EVENT_LINK_CHANGE, &dev->flags))
+		__handle_link_change(dev);
+
+	if (test_bit (EVENT_SET_RX_MODE, &dev->flags))
+		__handle_set_rx_mode(dev);
+
+
+	if (dev->flags)
+		netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void tx_complete (struct urb *urb)
+{
+	struct sk_buff		*skb = (struct sk_buff *) urb->context;
+	struct skb_data		*entry = (struct skb_data *) skb->cb;
+	struct usbnet		*dev = entry->dev;
+
+	if (urb->status == 0) {
+		struct pcpu_sw_netstats *stats64 = this_cpu_ptr(dev->net->tstats);
+		unsigned long flags;
+
+		flags = u64_stats_update_begin_irqsave(&stats64->syncp);
+		u64_stats_add(&stats64->tx_packets, entry->packets);
+		u64_stats_add(&stats64->tx_bytes, entry->length);
+		u64_stats_update_end_irqrestore(&stats64->syncp, flags);
+	} else {
+		dev->net->stats.tx_errors++;
+
+		switch (urb->status) {
+		case -EPIPE:
+			usbnet_defer_kevent (dev, EVENT_TX_HALT);
+			break;
+
+		/* software-driven interface shutdown */
+		case -ECONNRESET:		// async unlink
+		case -ESHUTDOWN:		// hardware gone
+			break;
+
+		/* like rx, tx gets controller i/o faults during hub_wq
+		 * delays and so it uses the same throttling mechanism.
+		 */
+		case -EPROTO:
+		case -ETIME:
+		case -EILSEQ:
+			usb_mark_last_busy(dev->udev);
+			if (!timer_pending (&dev->delay)) {
+				mod_timer (&dev->delay,
+					jiffies + THROTTLE_JIFFIES);
+				netif_dbg(dev, link, dev->net,
+					  "tx throttle %d\n", urb->status);
+			}
+			netif_stop_queue (dev->net);
+			break;
+		default:
+			netif_dbg(dev, tx_err, dev->net,
+				  "tx err %d\n", entry->urb->status);
+			break;
+		}
+	}
+
+	usb_autopm_put_interface_async(dev->intf);
+	(void) defer_bh(dev, skb, &dev->txq, tx_done);
+}
+
+/*-------------------------------------------------------------------------*/
+
+void usbnet_tx_timeout (struct net_device *net, unsigned int txqueue)
+{
+	struct usbnet		*dev = netdev_priv(net);
+
+	unlink_urbs (dev, &dev->txq);
+	tasklet_schedule (&dev->bh);
+	/* this needs to be handled individually because the generic layer
+	 * doesn't know what is sufficient and could not restore private
+	 * information if a remedy of an unconditional reset were used.
+	 */
+	if (dev->driver_info->recover)
+		(dev->driver_info->recover)(dev);
+}
+EXPORT_SYMBOL_GPL(usbnet_tx_timeout);
+
+/*-------------------------------------------------------------------------*/
+
+static int build_dma_sg(const struct sk_buff *skb, struct urb *urb)
+{
+	unsigned num_sgs, total_len = 0;
+	int i, s = 0;
+
+	num_sgs = skb_shinfo(skb)->nr_frags + 1;
+	if (num_sgs == 1)
+		return 0;
+
+	/* reserve one for zero packet */
+	urb->sg = kmalloc_array(num_sgs + 1, sizeof(struct scatterlist),
+				GFP_ATOMIC);
+	if (!urb->sg)
+		return -ENOMEM;
+
+	urb->num_sgs = num_sgs;
+	sg_init_table(urb->sg, urb->num_sgs + 1);
+
+	sg_set_buf(&urb->sg[s++], skb->data, skb_headlen(skb));
+	total_len += skb_headlen(skb);
+
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		skb_frag_t *f = &skb_shinfo(skb)->frags[i];
+
+		total_len += skb_frag_size(f);
+		sg_set_page(&urb->sg[i + s], skb_frag_page(f), skb_frag_size(f),
+			    skb_frag_off(f));
+	}
+	urb->transfer_buffer_length = total_len;
+
+	return 1;
+}
+
+netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
+				     struct net_device *net)
+{
+	struct usbnet		*dev = netdev_priv(net);
+	unsigned int			length;
+	struct urb		*urb = NULL;
+	struct skb_data		*entry;
+	const struct driver_info *info = dev->driver_info;
+	unsigned long		flags;
+	int retval;
+
+	if (skb)
+		skb_tx_timestamp(skb);
+
+	// some devices want funky USB-level framing, for
+	// win32 driver (usually) and/or hardware quirks
+	if (info->tx_fixup) {
+		skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
+		if (!skb) {
+			/* packet collected; minidriver waiting for more */
+			if (info->flags & FLAG_MULTI_PACKET)
+				goto not_drop;
+			netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
+			goto drop;
+		}
+	}
+
+	if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
+		netif_dbg(dev, tx_err, dev->net, "no urb\n");
+		goto drop;
+	}
+
+	entry = (struct skb_data *) skb->cb;
+	entry->urb = urb;
+	entry->dev = dev;
+
+	usb_fill_bulk_urb (urb, dev->udev, dev->out,
+			skb->data, skb->len, tx_complete, skb);
+	if (dev->can_dma_sg) {
+		if (build_dma_sg(skb, urb) < 0)
+			goto drop;
+	}
+	length = urb->transfer_buffer_length;
+
+	/* don't assume the hardware handles USB_ZERO_PACKET
+	 * NOTE:  strictly conforming cdc-ether devices should expect
+	 * the ZLP here, but ignore the one-byte packet.
+	 * NOTE2: CDC NCM specification is different from CDC ECM when
+	 * handling ZLP/short packets, so cdc_ncm driver will make short
+	 * packet itself if needed.
+	 */
+	if (length % dev->maxpacket == 0) {
+		if (!(info->flags & FLAG_SEND_ZLP)) {
+			if (!(info->flags & FLAG_MULTI_PACKET)) {
+				length++;
+				if (skb_tailroom(skb) && !urb->num_sgs) {
+					skb->data[skb->len] = 0;
+					__skb_put(skb, 1);
+				} else if (urb->num_sgs)
+					sg_set_buf(&urb->sg[urb->num_sgs++],
+							dev->padding_pkt, 1);
+			}
+		} else
+			urb->transfer_flags |= URB_ZERO_PACKET;
+	}
+	urb->transfer_buffer_length = length;
+
+	if (info->flags & FLAG_MULTI_PACKET) {
+		/* Driver has set number of packets and a length delta.
+		 * Calculate the complete length and ensure that it's
+		 * positive.
+		 */
+		entry->length += length;
+		if (WARN_ON_ONCE(entry->length <= 0))
+			entry->length = length;
+	} else {
+		usbnet_set_skb_tx_stats(skb, 1, length);
+	}
+
+	spin_lock_irqsave(&dev->txq.lock, flags);
+	retval = usb_autopm_get_interface_async(dev->intf);
+	if (retval < 0) {
+		spin_unlock_irqrestore(&dev->txq.lock, flags);
+		goto drop;
+	}
+	if (netif_queue_stopped(net)) {
+		usb_autopm_put_interface_async(dev->intf);
+		spin_unlock_irqrestore(&dev->txq.lock, flags);
+		goto drop;
+	}
+
+#ifdef CONFIG_PM
+	/* if this triggers the device is still a sleep */
+	if (test_bit(EVENT_DEV_ASLEEP, &dev->flags)) {
+		/* transmission will be done in resume */
+		usb_anchor_urb(urb, &dev->deferred);
+		/* no use to process more packets */
+		netif_stop_queue(net);
+		usb_put_urb(urb);
+		spin_unlock_irqrestore(&dev->txq.lock, flags);
+		netdev_dbg(dev->net, "Delaying transmission for resumption\n");
+		goto deferred;
+	}
+#endif
+
+	switch ((retval = usb_submit_urb (urb, GFP_ATOMIC))) {
+	case -EPIPE:
+		netif_stop_queue (net);
+		usbnet_defer_kevent (dev, EVENT_TX_HALT);
+		usb_autopm_put_interface_async(dev->intf);
+		break;
+	default:
+		usb_autopm_put_interface_async(dev->intf);
+		netif_dbg(dev, tx_err, dev->net,
+			  "tx: submit urb err %d\n", retval);
+		break;
+	case 0:
+		netif_trans_update(net);
+		__usbnet_queue_skb(&dev->txq, skb, tx_start);
+		if (dev->txq.qlen >= TX_QLEN (dev))
+			netif_stop_queue (net);
+	}
+	spin_unlock_irqrestore (&dev->txq.lock, flags);
+
+	if (retval) {
+		netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval);
+drop:
+		dev->net->stats.tx_dropped++;
+not_drop:
+		if (skb)
+			dev_kfree_skb_any (skb);
+		if (urb) {
+			kfree(urb->sg);
+			usb_free_urb(urb);
+		}
+	} else
+		netif_dbg(dev, tx_queued, dev->net,
+			  "> tx, len %u, type 0x%x\n", length, skb->protocol);
+#ifdef CONFIG_PM
+deferred:
+#endif
+	return NETDEV_TX_OK;
+}
+EXPORT_SYMBOL_GPL(usbnet_start_xmit);
+
+static int rx_alloc_submit(struct usbnet *dev, gfp_t flags)
+{
+	struct urb	*urb;
+	int		i;
+	int		ret = 0;
+
+	/* don't refill the queue all at once */
+	for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) {
+		urb = usb_alloc_urb(0, flags);
+		if (urb != NULL) {
+			ret = rx_submit(dev, urb, flags);
+			if (ret)
+				goto err;
+		} else {
+			ret = -ENOMEM;
+			goto err;
+		}
+	}
+err:
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+// tasklet (work deferred from completions, in_irq) or timer
+
+static void usbnet_bh (struct timer_list *t)
+{
+	struct usbnet		*dev = from_timer(dev, t, delay);
+	struct sk_buff		*skb;
+	struct skb_data		*entry;
+
+	while ((skb = skb_dequeue (&dev->done))) {
+		entry = (struct skb_data *) skb->cb;
+		switch (entry->state) {
+		case rx_done:
+			entry->state = rx_cleanup;
+			rx_process (dev, skb);
+			continue;
+		case tx_done:
+			kfree(entry->urb->sg);
+			fallthrough;
+		case rx_cleanup:
+			usb_free_urb (entry->urb);
+			dev_kfree_skb (skb);
+			continue;
+		default:
+			netdev_dbg(dev->net, "bogus skb state %d\n", entry->state);
+		}
+	}
+
+	/* restart RX again after disabling due to high error rate */
+	clear_bit(EVENT_RX_KILL, &dev->flags);
+
+	/* waiting for all pending urbs to complete?
+	 * only then can we forgo submitting anew
+	 */
+	if (waitqueue_active(&dev->wait)) {
+		if (dev->txq.qlen + dev->rxq.qlen + dev->done.qlen == 0)
+			wake_up_all(&dev->wait);
+
+	// or are we maybe short a few urbs?
+	} else if (netif_running (dev->net) &&
+		   netif_device_present (dev->net) &&
+		   netif_carrier_ok(dev->net) &&
+		   !timer_pending(&dev->delay) &&
+		   !test_bit(EVENT_RX_PAUSED, &dev->flags) &&
+		   !test_bit(EVENT_RX_HALT, &dev->flags)) {
+		int	temp = dev->rxq.qlen;
+
+		if (temp < RX_QLEN(dev)) {
+			if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK)
+				return;
+			if (temp != dev->rxq.qlen)
+				netif_dbg(dev, link, dev->net,
+					  "rxqlen %d --> %d\n",
+					  temp, dev->rxq.qlen);
+			if (dev->rxq.qlen < RX_QLEN(dev))
+				tasklet_schedule (&dev->bh);
+		}
+		if (dev->txq.qlen < TX_QLEN (dev))
+			netif_wake_queue (dev->net);
+	}
+}
+
+static void usbnet_bh_tasklet(struct tasklet_struct *t)
+{
+	struct usbnet *dev = from_tasklet(dev, t, bh);
+
+	usbnet_bh(&dev->delay);
+}
+
+
+/*-------------------------------------------------------------------------
+ *
+ * USB Device Driver support
+ *
+ *-------------------------------------------------------------------------*/
+
+// precondition: never called in_interrupt
+
+void usbnet_disconnect (struct usb_interface *intf)
+{
+	struct usbnet		*dev;
+	struct usb_device	*xdev;
+	struct net_device	*net;
+	struct urb		*urb;
+
+	dev = usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+	if (!dev)
+		return;
+
+	xdev = interface_to_usbdev (intf);
+
+	netif_info(dev, probe, dev->net, "unregister '%s' usb-%s-%s, %s\n",
+		   intf->dev.driver->name,
+		   xdev->bus->bus_name, xdev->devpath,
+		   dev->driver_info->description);
+
+	net = dev->net;
+	unregister_netdev (net);
+
+	while ((urb = usb_get_from_anchor(&dev->deferred))) {
+		dev_kfree_skb(urb->context);
+		kfree(urb->sg);
+		usb_free_urb(urb);
+	}
+
+	if (dev->driver_info->unbind)
+		dev->driver_info->unbind(dev, intf);
+
+	usb_kill_urb(dev->interrupt);
+	usb_free_urb(dev->interrupt);
+	kfree(dev->padding_pkt);
+
+	free_percpu(net->tstats);
+	free_netdev(net);
+}
+EXPORT_SYMBOL_GPL(usbnet_disconnect);
+
+static const struct net_device_ops usbnet_netdev_ops = {
+	.ndo_open		= usbnet_open,
+	.ndo_stop		= usbnet_stop,
+	.ndo_start_xmit		= usbnet_start_xmit,
+	.ndo_tx_timeout		= usbnet_tx_timeout,
+	.ndo_set_rx_mode	= usbnet_set_rx_mode,
+	.ndo_change_mtu		= usbnet_change_mtu,
+	.ndo_get_stats64	= dev_get_tstats64,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+};
+
+/*-------------------------------------------------------------------------*/
+
+// precondition: never called in_interrupt
+
+static struct device_type wlan_type = {
+	.name	= "wlan",
+};
+
+static struct device_type wwan_type = {
+	.name	= "wwan",
+};
+
+int
+usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
+{
+	struct usbnet			*dev;
+	struct net_device		*net;
+	struct usb_host_interface	*interface;
+	const struct driver_info	*info;
+	struct usb_device		*xdev;
+	int				status;
+	const char			*name;
+	struct usb_driver 	*driver = to_usb_driver(udev->dev.driver);
+
+	/* usbnet already took usb runtime pm, so have to enable the feature
+	 * for usb interface, otherwise usb_autopm_get_interface may return
+	 * failure if RUNTIME_PM is enabled.
+	 */
+	if (!driver->supports_autosuspend) {
+		driver->supports_autosuspend = 1;
+		pm_runtime_enable(&udev->dev);
+	}
+
+	name = udev->dev.driver->name;
+	info = (const struct driver_info *) prod->driver_info;
+	if (!info) {
+		dev_dbg (&udev->dev, "blacklisted by %s\n", name);
+		return -ENODEV;
+	}
+	xdev = interface_to_usbdev (udev);
+	interface = udev->cur_altsetting;
+
+	status = -ENOMEM;
+
+	// set up our own records
+	net = alloc_etherdev(sizeof(*dev));
+	if (!net)
+		goto out;
+
+	/* netdev_printk() needs this so do it as early as possible */
+	SET_NETDEV_DEV(net, &udev->dev);
+
+	dev = netdev_priv(net);
+	dev->udev = xdev;
+	dev->intf = udev;
+	dev->driver_info = info;
+	dev->driver_name = name;
+	dev->rx_speed = SPEED_UNSET;
+	dev->tx_speed = SPEED_UNSET;
+
+	net->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
+	if (!net->tstats)
+		goto out0;
+
+	dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
+				| NETIF_MSG_PROBE | NETIF_MSG_LINK);
+	init_waitqueue_head(&dev->wait);
+	skb_queue_head_init (&dev->rxq);
+	skb_queue_head_init (&dev->txq);
+	skb_queue_head_init (&dev->done);
+	skb_queue_head_init(&dev->rxq_pause);
+	tasklet_setup(&dev->bh, usbnet_bh_tasklet);
+	INIT_WORK (&dev->kevent, usbnet_deferred_kevent);
+	init_usb_anchor(&dev->deferred);
+	timer_setup(&dev->delay, usbnet_bh, 0);
+	mutex_init (&dev->phy_mutex);
+	mutex_init(&dev->interrupt_mutex);
+	dev->interrupt_count = 0;
+
+	dev->net = net;
+	strscpy(net->name, "usb%d", sizeof(net->name));
+	eth_hw_addr_set(net, node_id);
+
+	/* rx and tx sides can use different message sizes;
+	 * bind() should set rx_urb_size in that case.
+	 */
+	dev->hard_mtu = net->mtu + net->hard_header_len;
+	net->min_mtu = 0;
+	net->max_mtu = ETH_MAX_MTU;
+
+	net->netdev_ops = &usbnet_netdev_ops;
+	net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
+	net->ethtool_ops = &usbnet_ethtool_ops;
+
+	// allow device-specific bind/init procedures
+	// NOTE net->name still not usable ...
+	if (info->bind) {
+		status = info->bind (dev, udev);
+		if (status < 0)
+			goto out1;
+
+		// heuristic:  "usb%d" for links we know are two-host,
+		// else "eth%d" when there's reasonable doubt.  userspace
+		// can rename the link if it knows better.
+		if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
+		    ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
+		     (net->dev_addr [0] & 0x02) == 0))
+			strscpy(net->name, "eth%d", sizeof(net->name));
+		/* WLAN devices should always be named "wlan%d" */
+		if ((dev->driver_info->flags & FLAG_WLAN) != 0)
+			strscpy(net->name, "wlan%d", sizeof(net->name));
+		/* WWAN devices should always be named "wwan%d" */
+		if ((dev->driver_info->flags & FLAG_WWAN) != 0)
+			strscpy(net->name, "wwan%d", sizeof(net->name));
+
+		/* devices that cannot do ARP */
+		if ((dev->driver_info->flags & FLAG_NOARP) != 0)
+			net->flags |= IFF_NOARP;
+
+		/* maybe the remote can't receive an Ethernet MTU */
+		if (net->mtu > (dev->hard_mtu - net->hard_header_len))
+			net->mtu = dev->hard_mtu - net->hard_header_len;
+	} else if (!info->in || !info->out)
+		status = usbnet_get_endpoints (dev, udev);
+	else {
+		u8 ep_addrs[3] = {
+			info->in + USB_DIR_IN, info->out + USB_DIR_OUT, 0
+		};
+
+		dev->in = usb_rcvbulkpipe (xdev, info->in);
+		dev->out = usb_sndbulkpipe (xdev, info->out);
+		if (!(info->flags & FLAG_NO_SETINT))
+			status = usb_set_interface (xdev,
+				interface->desc.bInterfaceNumber,
+				interface->desc.bAlternateSetting);
+		else
+			status = 0;
+
+		if (status == 0 && !usb_check_bulk_endpoints(udev, ep_addrs))
+			status = -EINVAL;
+	}
+	if (status >= 0 && dev->status)
+		status = init_status (dev, udev);
+	if (status < 0)
+		goto out3;
+
+	if (!dev->rx_urb_size)
+		dev->rx_urb_size = dev->hard_mtu;
+	dev->maxpacket = usb_maxpacket(dev->udev, dev->out);
+	if (dev->maxpacket == 0) {
+		/* that is a broken device */
+		status = -ENODEV;
+		goto out4;
+	}
+
+	/* let userspace know we have a random address */
+	if (ether_addr_equal(net->dev_addr, node_id))
+		net->addr_assign_type = NET_ADDR_RANDOM;
+
+	if ((dev->driver_info->flags & FLAG_WLAN) != 0)
+		SET_NETDEV_DEVTYPE(net, &wlan_type);
+	if ((dev->driver_info->flags & FLAG_WWAN) != 0)
+		SET_NETDEV_DEVTYPE(net, &wwan_type);
+
+	/* initialize max rx_qlen and tx_qlen */
+	usbnet_update_max_qlen(dev);
+
+	if (dev->can_dma_sg && !(info->flags & FLAG_SEND_ZLP) &&
+		!(info->flags & FLAG_MULTI_PACKET)) {
+		dev->padding_pkt = kzalloc(1, GFP_KERNEL);
+		if (!dev->padding_pkt) {
+			status = -ENOMEM;
+			goto out4;
+		}
+	}
+
+	status = register_netdev (net);
+	if (status)
+		goto out5;
+	netif_info(dev, probe, dev->net,
+		   "register '%s' at usb-%s-%s, %s, %pM\n",
+		   udev->dev.driver->name,
+		   xdev->bus->bus_name, xdev->devpath,
+		   dev->driver_info->description,
+		   net->dev_addr);
+
+	// ok, it's ready to go.
+	usb_set_intfdata (udev, dev);
+
+	netif_device_attach (net);
+
+	if (dev->driver_info->flags & FLAG_LINK_INTR)
+		usbnet_link_change(dev, 0, 0);
+
+	return 0;
+
+out5:
+	kfree(dev->padding_pkt);
+out4:
+	usb_free_urb(dev->interrupt);
+out3:
+	if (info->unbind)
+		info->unbind (dev, udev);
+out1:
+	/* subdrivers must undo all they did in bind() if they
+	 * fail it, but we may fail later and a deferred kevent
+	 * may trigger an error resubmitting itself and, worse,
+	 * schedule a timer. So we kill it all just in case.
+	 */
+	cancel_work_sync(&dev->kevent);
+	del_timer_sync(&dev->delay);
+	free_percpu(net->tstats);
+out0:
+	free_netdev(net);
+out:
+	return status;
+}
+EXPORT_SYMBOL_GPL(usbnet_probe);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * suspend the whole driver as soon as the first interface is suspended
+ * resume only when the last interface is resumed
+ */
+
+int usbnet_suspend (struct usb_interface *intf, pm_message_t message)
+{
+	struct usbnet		*dev = usb_get_intfdata(intf);
+
+	if (!dev->suspend_count++) {
+		spin_lock_irq(&dev->txq.lock);
+		/* don't autosuspend while transmitting */
+		if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
+			dev->suspend_count--;
+			spin_unlock_irq(&dev->txq.lock);
+			return -EBUSY;
+		} else {
+			set_bit(EVENT_DEV_ASLEEP, &dev->flags);
+			spin_unlock_irq(&dev->txq.lock);
+		}
+		/*
+		 * accelerate emptying of the rx and queues, to avoid
+		 * having everything error out.
+		 */
+		netif_device_detach (dev->net);
+		usbnet_terminate_urbs(dev);
+		__usbnet_status_stop_force(dev);
+
+		/*
+		 * reattach so runtime management can use and
+		 * wake the device
+		 */
+		netif_device_attach (dev->net);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_suspend);
+
+int usbnet_resume (struct usb_interface *intf)
+{
+	struct usbnet		*dev = usb_get_intfdata(intf);
+	struct sk_buff          *skb;
+	struct urb              *res;
+	int                     retval;
+
+	if (!--dev->suspend_count) {
+		/* resume interrupt URB if it was previously submitted */
+		__usbnet_status_start_force(dev, GFP_NOIO);
+
+		spin_lock_irq(&dev->txq.lock);
+		while ((res = usb_get_from_anchor(&dev->deferred))) {
+
+			skb = (struct sk_buff *)res->context;
+			retval = usb_submit_urb(res, GFP_ATOMIC);
+			if (retval < 0) {
+				dev_kfree_skb_any(skb);
+				kfree(res->sg);
+				usb_free_urb(res);
+				usb_autopm_put_interface_async(dev->intf);
+			} else {
+				netif_trans_update(dev->net);
+				__skb_queue_tail(&dev->txq, skb);
+			}
+		}
+
+		smp_mb();
+		clear_bit(EVENT_DEV_ASLEEP, &dev->flags);
+		spin_unlock_irq(&dev->txq.lock);
+
+		if (test_bit(EVENT_DEV_OPEN, &dev->flags)) {
+			/* handle remote wakeup ASAP
+			 * we cannot race against stop
+			 */
+			if (netif_device_present(dev->net) &&
+				!timer_pending(&dev->delay) &&
+				!test_bit(EVENT_RX_HALT, &dev->flags))
+					rx_alloc_submit(dev, GFP_NOIO);
+
+			if (!(dev->txq.qlen >= TX_QLEN(dev)))
+				netif_tx_wake_all_queues(dev->net);
+			tasklet_schedule (&dev->bh);
+		}
+	}
+
+	if (test_and_clear_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags))
+		usb_autopm_get_interface_no_resume(intf);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usbnet_resume);
+
+/*
+ * Either a subdriver implements manage_power, then it is assumed to always
+ * be ready to be suspended or it reports the readiness to be suspended
+ * explicitly
+ */
+void usbnet_device_suggests_idle(struct usbnet *dev)
+{
+	if (!test_and_set_bit(EVENT_DEVICE_REPORT_IDLE, &dev->flags)) {
+		dev->intf->needs_remote_wakeup = 1;
+		usb_autopm_put_interface_async(dev->intf);
+	}
+}
+EXPORT_SYMBOL(usbnet_device_suggests_idle);
+
+/*
+ * For devices that can do without special commands
+ */
+int usbnet_manage_power(struct usbnet *dev, int on)
+{
+	dev->intf->needs_remote_wakeup = on;
+	return 0;
+}
+EXPORT_SYMBOL(usbnet_manage_power);
+
+void usbnet_link_change(struct usbnet *dev, bool link, bool need_reset)
+{
+	/* update link after link is reseted */
+	if (link && !need_reset)
+		netif_carrier_on(dev->net);
+	else
+		netif_carrier_off(dev->net);
+
+	if (need_reset && link)
+		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+	else
+		usbnet_defer_kevent(dev, EVENT_LINK_CHANGE);
+}
+EXPORT_SYMBOL(usbnet_link_change);
+
+/*-------------------------------------------------------------------------*/
+static int __usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
+			     u16 value, u16 index, void *data, u16 size)
+{
+	void *buf = NULL;
+	int err = -ENOMEM;
+
+	netdev_dbg(dev->net, "usbnet_read_cmd cmd=0x%02x reqtype=%02x"
+		   " value=0x%04x index=0x%04x size=%d\n",
+		   cmd, reqtype, value, index, size);
+
+	if (size) {
+		buf = kmalloc(size, GFP_NOIO);
+		if (!buf)
+			goto out;
+	}
+
+	err = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+			      cmd, reqtype, value, index, buf, size,
+			      USB_CTRL_GET_TIMEOUT);
+	if (err > 0 && err <= size) {
+		if (data)
+			memcpy(data, buf, err);
+		else
+			netdev_dbg(dev->net,
+				   "Huh? Data requested but thrown away.\n");
+	}
+	kfree(buf);
+out:
+	return err;
+}
+
+static int __usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
+			      u16 value, u16 index, const void *data,
+			      u16 size)
+{
+	void *buf = NULL;
+	int err = -ENOMEM;
+
+	netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
+		   " value=0x%04x index=0x%04x size=%d\n",
+		   cmd, reqtype, value, index, size);
+
+	if (data) {
+		buf = kmemdup(data, size, GFP_NOIO);
+		if (!buf)
+			goto out;
+	} else {
+        if (size) {
+            WARN_ON_ONCE(1);
+            err = -EINVAL;
+            goto out;
+        }
+    }
+
+	err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+			      cmd, reqtype, value, index, buf, size,
+			      USB_CTRL_SET_TIMEOUT);
+	kfree(buf);
+
+out:
+	return err;
+}
+
+/*
+ * The function can't be called inside suspend/resume callback,
+ * otherwise deadlock will be caused.
+ */
+int usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
+		    u16 value, u16 index, void *data, u16 size)
+{
+	int ret;
+
+	if (usb_autopm_get_interface(dev->intf) < 0)
+		return -ENODEV;
+	ret = __usbnet_read_cmd(dev, cmd, reqtype, value, index,
+				data, size);
+	usb_autopm_put_interface(dev->intf);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usbnet_read_cmd);
+
+/*
+ * The function can't be called inside suspend/resume callback,
+ * otherwise deadlock will be caused.
+ */
+int usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
+		     u16 value, u16 index, const void *data, u16 size)
+{
+	int ret;
+
+	if (usb_autopm_get_interface(dev->intf) < 0)
+		return -ENODEV;
+	ret = __usbnet_write_cmd(dev, cmd, reqtype, value, index,
+				 data, size);
+	usb_autopm_put_interface(dev->intf);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usbnet_write_cmd);
+
+/*
+ * The function can be called inside suspend/resume callback safely
+ * and should only be called by suspend/resume callback generally.
+ */
+int usbnet_read_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
+			  u16 value, u16 index, void *data, u16 size)
+{
+	return __usbnet_read_cmd(dev, cmd, reqtype, value, index,
+				 data, size);
+}
+EXPORT_SYMBOL_GPL(usbnet_read_cmd_nopm);
+
+/*
+ * The function can be called inside suspend/resume callback safely
+ * and should only be called by suspend/resume callback generally.
+ */
+int usbnet_write_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
+			  u16 value, u16 index, const void *data,
+			  u16 size)
+{
+	return __usbnet_write_cmd(dev, cmd, reqtype, value, index,
+				  data, size);
+}
+EXPORT_SYMBOL_GPL(usbnet_write_cmd_nopm);
+
+static void usbnet_async_cmd_cb(struct urb *urb)
+{
+	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
+	int status = urb->status;
+
+	if (status < 0)
+		dev_dbg(&urb->dev->dev, "%s failed with %d",
+			__func__, status);
+
+	kfree(req);
+	usb_free_urb(urb);
+}
+
+/*
+ * The caller must make sure that device can't be put into suspend
+ * state until the control URB completes.
+ */
+int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype,
+			   u16 value, u16 index, const void *data, u16 size)
+{
+	struct usb_ctrlrequest *req;
+	struct urb *urb;
+	int err = -ENOMEM;
+	void *buf = NULL;
+
+	netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x"
+		   " value=0x%04x index=0x%04x size=%d\n",
+		   cmd, reqtype, value, index, size);
+
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb)
+		goto fail;
+
+	if (data) {
+		buf = kmemdup(data, size, GFP_ATOMIC);
+		if (!buf) {
+			netdev_err(dev->net, "Error allocating buffer"
+				   " in %s!\n", __func__);
+			goto fail_free_urb;
+		}
+	}
+
+	req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
+	if (!req)
+		goto fail_free_buf;
+
+	req->bRequestType = reqtype;
+	req->bRequest = cmd;
+	req->wValue = cpu_to_le16(value);
+	req->wIndex = cpu_to_le16(index);
+	req->wLength = cpu_to_le16(size);
+
+	usb_fill_control_urb(urb, dev->udev,
+			     usb_sndctrlpipe(dev->udev, 0),
+			     (void *)req, buf, size,
+			     usbnet_async_cmd_cb, req);
+	urb->transfer_flags |= URB_FREE_BUFFER;
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		netdev_err(dev->net, "Error submitting the control"
+			   " message: status=%d\n", err);
+		goto fail_free_all;
+	}
+	return 0;
+
+fail_free_all:
+	kfree(req);
+fail_free_buf:
+	kfree(buf);
+	/*
+	 * avoid a double free
+	 * needed because the flag can be set only
+	 * after filling the URB
+	 */
+	urb->transfer_flags = 0;
+fail_free_urb:
+	usb_free_urb(urb);
+fail:
+	return err;
+
+}
+EXPORT_SYMBOL_GPL(usbnet_write_cmd_async);
+/*-------------------------------------------------------------------------*/
+
+static int __init usbnet_init(void)
+{
+	/* Compiler should optimize this out. */
+	BUILD_BUG_ON(
+		sizeof_field(struct sk_buff, cb) < sizeof(struct skb_data));
+
+	eth_random_addr(node_id);
+	return 0;
+}
+module_init(usbnet_init);
+
+static void __exit usbnet_exit(void)
+{
+}
+module_exit(usbnet_exit);
+
+MODULE_AUTHOR("David Brownell");
+MODULE_DESCRIPTION("USB network driver framework");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/zaurus.c b/drivers/net/usb/zaurus.c
new file mode 100644
index 000000000..df3617c4c
--- /dev/null
+++ b/drivers/net/usb/zaurus.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
+ * Copyright (C) 2002-2005 by David Brownell
+ */
+
+// #define	DEBUG			// error path messages, extra info
+// #define	VERBOSE			// more; success messages
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * All known Zaurii lie about their standards conformance.  At least
+ * the earliest SA-1100 models lie by saying they support CDC Ethernet.
+ * Some later models (especially PXA-25x and PXA-27x based ones) lie
+ * and say they support CDC MDLM (for access to cell phone modems).
+ *
+ * There are non-Zaurus products that use these same protocols too.
+ *
+ * The annoying thing is that at the same time Sharp was developing
+ * that annoying standards-breaking software, the Linux community had
+ * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
+ * That is, the same functionality but not violating standards.
+ *
+ * The CDC Ethernet nonconformance points are troublesome to hosts
+ * with a true CDC Ethernet implementation:
+ *   - Framing appends a CRC, which the spec says drivers "must not" do;
+ *   - Transfers data in altsetting zero, instead of altsetting 1;
+ *   - All these peripherals use the same ethernet address.
+ *
+ * The CDC MDLM nonconformance is less immediately troublesome, since all
+ * MDLM implementations are quasi-proprietary anyway.
+ */
+
+static struct sk_buff *
+zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	int			padlen;
+	struct sk_buff		*skb2;
+
+	padlen = 2;
+	if (!skb_cloned(skb)) {
+		int	tailroom = skb_tailroom(skb);
+		if ((padlen + 4) <= tailroom)
+			goto done;
+	}
+	skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
+	dev_kfree_skb_any(skb);
+	skb = skb2;
+	if (skb) {
+		u32		fcs;
+done:
+		fcs = crc32_le(~0, skb->data, skb->len);
+		fcs = ~fcs;
+
+		skb_put_u8(skb, fcs & 0xff);
+		skb_put_u8(skb, (fcs >> 8) & 0xff);
+		skb_put_u8(skb, (fcs >> 16) & 0xff);
+		skb_put_u8(skb, (fcs >> 24) & 0xff);
+	}
+	return skb;
+}
+
+static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	/* Belcarra's funky framing has other options; mostly
+	 * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
+	 */
+	dev->net->hard_header_len += 6;
+	dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
+	return usbnet_generic_cdc_bind(dev, intf);
+}
+
+/* PDA style devices are always connected if present */
+static int always_connected (struct usbnet *dev)
+{
+	return 0;
+}
+
+static const struct driver_info	zaurus_sl5x00_info = {
+	.description =	"Sharp Zaurus SL-5x00",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.bind =		zaurus_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.tx_fixup =	zaurus_tx_fixup,
+};
+#define	ZAURUS_STRONGARM_INFO	((unsigned long)&zaurus_sl5x00_info)
+
+static const struct driver_info	zaurus_pxa_info = {
+	.description =	"Sharp Zaurus, PXA-2xx based",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.bind =		zaurus_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.tx_fixup =	zaurus_tx_fixup,
+};
+#define	ZAURUS_PXA_INFO		((unsigned long)&zaurus_pxa_info)
+
+static const struct driver_info	olympus_mxl_info = {
+	.description =	"Olympus R1000",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.bind =		zaurus_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.tx_fixup =	zaurus_tx_fixup,
+};
+#define	OLYMPUS_MXL_INFO	((unsigned long)&olympus_mxl_info)
+
+
+/* Some more recent products using Lineo/Belcarra code will wrongly claim
+ * CDC MDLM conformance.  They aren't conformant:  data endpoints live
+ * in the control interface, there's no data interface, and it's not used
+ * to talk to a cell phone radio.  But at least we can detect these two
+ * pseudo-classes, rather than growing this product list with entries for
+ * each new nonconformant product (sigh).
+ */
+static const u8 safe_guid[16] = {
+	0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
+	0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
+};
+static const u8 blan_guid[16] = {
+	0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
+	0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
+};
+
+static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	u8				*buf = intf->cur_altsetting->extra;
+	int				len = intf->cur_altsetting->extralen;
+	struct usb_cdc_mdlm_desc	*desc = NULL;
+	struct usb_cdc_mdlm_detail_desc	*detail = NULL;
+
+	while (len > 3) {
+		if (buf [1] != USB_DT_CS_INTERFACE)
+			goto next_desc;
+
+		/* use bDescriptorSubType, and just verify that we get a
+		 * "BLAN" (or "SAFE") descriptor.
+		 */
+		switch (buf [2]) {
+		case USB_CDC_MDLM_TYPE:
+			if (desc) {
+				dev_dbg(&intf->dev, "extra MDLM\n");
+				goto bad_desc;
+			}
+			desc = (void *) buf;
+			if (desc->bLength != sizeof *desc) {
+				dev_dbg(&intf->dev, "MDLM len %u\n",
+					desc->bLength);
+				goto bad_desc;
+			}
+			/* expect bcdVersion 1.0, ignore */
+			if (memcmp(&desc->bGUID, blan_guid, 16) &&
+			    memcmp(&desc->bGUID, safe_guid, 16)) {
+				/* hey, this one might _really_ be MDLM! */
+				dev_dbg(&intf->dev, "MDLM guid\n");
+				goto bad_desc;
+			}
+			break;
+		case USB_CDC_MDLM_DETAIL_TYPE:
+			if (detail) {
+				dev_dbg(&intf->dev, "extra MDLM detail\n");
+				goto bad_desc;
+			}
+			detail = (void *) buf;
+			switch (detail->bGuidDescriptorType) {
+			case 0:			/* "SAFE" */
+				if (detail->bLength != (sizeof *detail + 2))
+					goto bad_detail;
+				break;
+			case 1:			/* "BLAN" */
+				if (detail->bLength != (sizeof *detail + 3))
+					goto bad_detail;
+				break;
+			default:
+				goto bad_detail;
+			}
+
+			/* assuming we either noticed BLAN already, or will
+			 * find it soon, there are some data bytes here:
+			 *  - bmNetworkCapabilities (unused)
+			 *  - bmDataCapabilities (bits, see below)
+			 *  - bPad (ignored, for PADAFTER -- BLAN-only)
+			 * bits are:
+			 *  - 0x01 -- Zaurus framing (add CRC)
+			 *  - 0x02 -- PADBEFORE (CRC includes some padding)
+			 *  - 0x04 -- PADAFTER (some padding after CRC)
+			 *  - 0x08 -- "fermat" packet mangling (for hw bugs)
+			 * the PADBEFORE appears not to matter; we interop
+			 * with devices that use it and those that don't.
+			 */
+			if ((detail->bDetailData[1] & ~0x02) != 0x01) {
+				/* bmDataCapabilities == 0 would be fine too,
+				 * but framing is minidriver-coupled for now.
+				 */
+bad_detail:
+				dev_dbg(&intf->dev,
+						"bad MDLM detail, %d %d %d\n",
+						detail->bLength,
+						detail->bDetailData[0],
+						detail->bDetailData[2]);
+				goto bad_desc;
+			}
+
+			/* same extra framing as for non-BLAN mode */
+			dev->net->hard_header_len += 6;
+			dev->rx_urb_size = dev->net->hard_header_len
+					+ dev->net->mtu;
+			break;
+		}
+next_desc:
+		len -= buf [0];	/* bLength */
+		buf += buf [0];
+	}
+
+	if (!desc || !detail) {
+		dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
+			desc ? "" : "func ",
+			detail ? "" : "detail ");
+		goto bad_desc;
+	}
+
+	/* There's probably a CDC Ethernet descriptor there, but we can't
+	 * rely on the Ethernet address it provides since not all vendors
+	 * bother to make it unique.  Likewise there's no point in tracking
+	 * of the CDC event notifications.
+	 */
+	return usbnet_get_endpoints(dev, intf);
+
+bad_desc:
+	dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
+	return -ENODEV;
+}
+
+static const struct driver_info	bogus_mdlm_info = {
+	.description =	"pseudo-MDLM (BLAN) device",
+	.flags =	FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
+	.check_connect = always_connected,
+	.tx_fixup =	zaurus_tx_fixup,
+	.bind =		blan_mdlm_bind,
+};
+
+static const struct usb_device_id	products [] = {
+#define	ZAURUS_MASTER_INTERFACE \
+	.bInterfaceClass	= USB_CLASS_COMM, \
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_ETHERNET, \
+	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
+
+#define ZAURUS_FAKE_INTERFACE \
+	.bInterfaceClass	= USB_CLASS_COMM, \
+	.bInterfaceSubClass	= USB_CDC_SUBCLASS_MDLM, \
+	.bInterfaceProtocol	= USB_CDC_PROTO_NONE
+
+/* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
+{
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8004,
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_STRONGARM_INFO,
+},
+
+/* PXA-2xx based models are also lying-about-cdc.  If you add any
+ * more devices that claim to be CDC Ethernet, make sure they get
+ * added to the blacklist in cdc_ether too.
+ *
+ * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
+ * unlike the older ones with 2.4 "embedix" kernels.
+ */
+{
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8005,	/* A-300 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags	=   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8005,	/* A-300 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8006,	/* B-500/SL-5600 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8006,	/* B-500/SL-5600 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+	          | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8007,	/* C-700 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			  | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x8007,	/* C-700 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	.idProduct              = 0x9031,	/* C-750 C-760 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	/* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */
+	USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	.idProduct              = 0x9032,	/* SL-6000 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+			    | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor		= 0x04DD,
+	.idProduct		= 0x9032,	/* SL-6000 */
+	ZAURUS_FAKE_INTERFACE,
+	.driver_info = (unsigned long)&bogus_mdlm_info,
+}, {
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x04DD,
+	/* reported with some C860 units */
+	.idProduct              = 0x9050,	/* C-860 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = ZAURUS_PXA_INFO,
+},
+{
+	/* Motorola Rokr E6 */
+	USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6027, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+}, {
+	/* Motorola MOTOMAGX phones */
+	USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+},
+
+/* Olympus has some models with a Zaurus-compatible option.
+ * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
+ */
+{
+	.match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
+		 | USB_DEVICE_ID_MATCH_DEVICE,
+	.idVendor               = 0x07B4,
+	.idProduct              = 0x0F02,	/* R-1000 */
+	ZAURUS_MASTER_INTERFACE,
+	.driver_info = OLYMPUS_MXL_INFO,
+},
+
+/* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
+{
+	USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
+			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
+	.driver_info = (unsigned long) &bogus_mdlm_info,
+},
+	{ },		// END
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver zaurus_driver = {
+	.name =		"zaurus",
+	.id_table =	products,
+	.probe =	usbnet_probe,
+	.disconnect =	usbnet_disconnect,
+	.suspend =	usbnet_suspend,
+	.resume =	usbnet_resume,
+	.disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(zaurus_driver);
+
+MODULE_AUTHOR("Pavel Machek, David Brownell");
+MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
+MODULE_LICENSE("GPL");