Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

36 files changed, 9932 insertions, 0 deletions

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
new file mode 100644
index 000000000..ec8a49c04
--- /dev/null
+++ b/drivers/nvmem/Kconfig
@@ -0,0 +1,370 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig NVMEM
+	bool "NVMEM Support"
+	help
+	  Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
+
+	  This framework is designed to provide a generic interface to NVMEM
+	  from both the Linux Kernel and the userspace.
+
+	  If unsure, say no.
+
+if NVMEM
+
+config NVMEM_SYSFS
+	bool "/sys/bus/nvmem/devices/*/nvmem (sysfs interface)"
+	depends on SYSFS
+	default y
+	help
+	 Say Y here to add a sysfs interface for NVMEM.
+
+	 This interface is mostly used by userspace applications to
+	 read/write directly into nvmem.
+
+# Devices
+
+config NVMEM_APPLE_EFUSES
+	tristate "Apple eFuse support"
+	depends on ARCH_APPLE || COMPILE_TEST
+	default ARCH_APPLE
+	help
+	  Say y here to enable support for reading eFuses on Apple SoCs
+	  such as the M1. These are e.g. used to store factory programmed
+	  calibration data required for the PCIe or the USB-C PHY.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called nvmem-apple-efuses.
+
+config NVMEM_BCM_OCOTP
+	tristate "Broadcom On-Chip OTP Controller support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM
+	default ARCH_BCM_IPROC
+	help
+	  Say y here to enable read/write access to the Broadcom OTP
+	  controller.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-bcm-ocotp.
+
+config NVMEM_BRCM_NVRAM
+	tristate "Broadcom's NVRAM support"
+	depends on ARCH_BCM_5301X || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver provides support for Broadcom's NVRAM that can be accessed
+	  using I/O mapping.
+
+config NVMEM_IMX_IIM
+	tristate "i.MX IC Identification Module support"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	  This is a driver for the IC Identification Module (IIM) available on
+	  i.MX SoCs, providing access to 4 Kbits of programmable
+	  eFuses.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-imx-iim.
+
+config NVMEM_IMX_OCOTP
+	tristate "i.MX 6/7/8 On-Chip OTP Controller support"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a driver for the On-Chip OTP Controller (OCOTP) available on
+	  i.MX6 SoCs, providing access to 4 Kbits of one-time programmable
+	  eFuses.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-imx-ocotp.
+
+config NVMEM_IMX_OCOTP_SCU
+	tristate "i.MX8 SCU On-Chip OTP Controller support"
+	depends on IMX_SCU
+	depends on HAVE_ARM_SMCCC
+	help
+	  This is a driver for the SCU On-Chip OTP Controller (OCOTP)
+	  available on i.MX8 SoCs.
+
+config NVMEM_JZ4780_EFUSE
+	tristate "JZ4780 EFUSE Memory Support"
+	depends on MACH_INGENIC || COMPILE_TEST
+	depends on HAS_IOMEM
+	depends on OF
+	select REGMAP_MMIO
+	help
+	  Say Y here to include support for JZ4780 efuse memory found on
+	  all JZ4780 SoC based devices.
+	  To compile this driver as a module, choose M here: the module
+	  will be called nvmem_jz4780_efuse.
+
+config NVMEM_LAN9662_OTPC
+	tristate "Microchip LAN9662 OTP controller support"
+	depends on SOC_LAN966 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This driver enables the OTP controller available on Microchip LAN9662
+	  SoCs. It controls the access to the OTP memory connected to it.
+
+config NVMEM_LAYERSCAPE_SFP
+	tristate "Layerscape SFP (Security Fuse Processor) support"
+	depends on ARCH_LAYERSCAPE || COMPILE_TEST
+	depends on HAS_IOMEM
+	select REGMAP_MMIO
+	help
+	  This driver provides support to read the eFuses on Freescale
+	  Layerscape SoC's. For example, the vendor provides a per part
+	  unique ID there.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called layerscape-sfp.
+
+config NVMEM_LPC18XX_EEPROM
+	tristate "NXP LPC18XX EEPROM Memory Support"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say Y here to include support for NXP LPC18xx EEPROM memory found in
+	  NXP LPC185x/3x and LPC435x/3x/2x/1x devices.
+	  To compile this driver as a module, choose M here: the module
+	  will be called nvmem_lpc18xx_eeprom.
+
+config NVMEM_LPC18XX_OTP
+	tristate "NXP LPC18XX OTP Memory Support"
+	depends on ARCH_LPC18XX || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say Y here to include support for NXP LPC18xx OTP memory found on
+	  all LPC18xx and LPC43xx devices.
+	  To compile this driver as a module, choose M here: the module
+	  will be called nvmem_lpc18xx_otp.
+
+config NVMEM_MESON_EFUSE
+	tristate "Amlogic Meson GX eFuse Support"
+	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
+	help
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson GX SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_meson_efuse.
+
+config NVMEM_MESON_MX_EFUSE
+	tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
+	depends on ARCH_MESON || COMPILE_TEST
+	help
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson6, Meson8 and Meson8b SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_meson_mx_efuse.
+
+config NVMEM_MICROCHIP_OTPC
+	tristate "Microchip OTPC support"
+	depends on ARCH_AT91 || COMPILE_TEST
+	help
+	  This driver enable the OTP controller available on Microchip SAMA7G5
+	  SoCs. It controlls the access to the OTP memory connected to it.
+
+config NVMEM_MTK_EFUSE
+	tristate "Mediatek SoCs EFUSE support"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a driver to access hardware related data like sensor
+	  calibration, HDMI impedance etc.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called efuse-mtk.
+
+config NVMEM_MXS_OCOTP
+	tristate "Freescale MXS On-Chip OTP Memory Support"
+	depends on ARCH_MXS || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  If you say Y here, you will get readonly access to the
+	  One Time Programmable memory pages that are stored
+	  on the Freescale i.MX23/i.MX28 processor.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-mxs-ocotp.
+
+config NVMEM_NINTENDO_OTP
+	tristate "Nintendo Wii and Wii U OTP Support"
+	depends on WII || COMPILE_TEST
+	help
+	  This is a driver exposing the OTP of a Nintendo Wii or Wii U console.
+
+	  This memory contains common and per-console keys, signatures and
+	  related data required to access peripherals.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-nintendo-otp.
+
+config NVMEM_QCOM_QFPROM
+	tristate "QCOM QFPROM Support"
+	depends on ARCH_QCOM || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say y here to enable QFPROM support. The QFPROM provides access
+	  functions for QFPROM data to rest of the drivers via nvmem interface.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_qfprom.
+
+config NVMEM_RAVE_SP_EEPROM
+	tristate "Rave SP EEPROM Support"
+	depends on RAVE_SP_CORE
+	help
+	  Say y here to enable Rave SP EEPROM support.
+
+config NVMEM_RMEM
+	tristate "Reserved Memory Based Driver Support"
+	depends on HAS_IOMEM
+	help
+	  This driver maps reserved memory into an nvmem device. It might be
+	  useful to expose information left by firmware in memory.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-rmem.
+
+config NVMEM_ROCKCHIP_EFUSE
+	tristate "Rockchip eFuse Support"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple drive to dump specified values of Rockchip SoC
+	  from eFuse, such as cpu-leakage.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_rockchip_efuse.
+
+config NVMEM_ROCKCHIP_OTP
+	tristate "Rockchip OTP controller support"
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple drive to dump specified values of Rockchip SoC
+	  from otp, such as cpu-leakage.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_rockchip_otp.
+
+config NVMEM_SC27XX_EFUSE
+	tristate "Spreadtrum SC27XX eFuse Support"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of Spreadtrum
+	  SC27XX PMICs from eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-sc27xx-efuse.
+
+config NVMEM_SNVS_LPGPR
+	tristate "Support for Low Power General Purpose Register"
+	depends on ARCH_MXC || COMPILE_TEST
+	help
+	  This is a driver for Low Power General Purpose Register (LPGPR) available on
+	  i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-snvs-lpgpr.
+
+config NVMEM_SPMI_SDAM
+	tristate "SPMI SDAM Support"
+	depends on SPMI
+	help
+	  This driver supports the Shared Direct Access Memory Module on
+	  Qualcomm Technologies, Inc. PMICs. It provides the clients
+	  an interface to read/write to the SDAM module's shared memory.
+
+config NVMEM_SPRD_EFUSE
+	tristate "Spreadtrum SoC eFuse Support"
+	depends on ARCH_SPRD || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of Spreadtrum
+	  SoCs from eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-sprd-efuse.
+
+config NVMEM_STM32_ROMEM
+	tristate "STMicroelectronics STM32 factory-programmed memory support"
+	depends on ARCH_STM32 || COMPILE_TEST
+	help
+	  Say y here to enable read-only access for STMicroelectronics STM32
+	  factory-programmed memory area.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-stm32-romem.
+
+config NVMEM_SUNPLUS_OCOTP
+	tristate "Sunplus SoC OTP support"
+	depends on SOC_SP7021 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a driver for the On-chip OTP controller (OCOTP) available
+	  on Sunplus SoCs. It provides access to 128 bytes of one-time
+	  programmable eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-sunplus-ocotp.
+
+config NVMEM_SUNXI_SID
+	tristate "Allwinner SoCs SID support"
+	depends on ARCH_SUNXI
+	help
+	  This is a driver for the 'security ID' available on various Allwinner
+	  devices.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_sunxi_sid.
+
+config NVMEM_U_BOOT_ENV
+	tristate "U-Boot environment variables support"
+	depends on OF && MTD
+	select CRC32
+	help
+	  U-Boot stores its setup as environment variables. This driver adds
+	  support for verifying & exporting such data. It also exposes variables
+	  as NVMEM cells so they can be referenced by other drivers.
+
+	  Currently this drivers works only with env variables on top of MTD.
+
+	  If compiled as module it will be called nvmem_u-boot-env.
+
+config NVMEM_UNIPHIER_EFUSE
+	tristate "UniPhier SoCs eFuse support"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of UniPhier SoC
+	  from eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-uniphier-efuse.
+
+config NVMEM_VF610_OCOTP
+	tristate "VF610 SoC OCOTP support"
+	depends on SOC_VF610 || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a driver for the 'OCOTP' peripheral available on Vybrid
+	  devices like VF5xx and VF6xx.
+
+	  This driver can also be build as a module. If so, the module will
+	  be called nvmem-vf610-ocotp.
+
+config NVMEM_ZYNQMP
+	bool "Xilinx ZYNQMP SoC nvmem firmware support"
+	depends on ARCH_ZYNQMP
+	help
+	  This is a driver to access hardware related data like
+	  soc revision, IDCODE... etc by using the firmware
+	  interface.
+
+	  If sure, say yes. If unsure, say no.
+
+endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
new file mode 100644
index 000000000..fa80fe17e
--- /dev/null
+++ b/drivers/nvmem/Makefile
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for nvmem drivers.
+#
+
+obj-$(CONFIG_NVMEM)		+= nvmem_core.o
+nvmem_core-y			:= core.o
+
+# Devices
+obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
+nvmem-apple-efuses-y 			:= apple-efuses.o
+obj-$(CONFIG_NVMEM_BCM_OCOTP)		+= nvmem-bcm-ocotp.o
+nvmem-bcm-ocotp-y			:= bcm-ocotp.o
+obj-$(CONFIG_NVMEM_BRCM_NVRAM)		+= nvmem_brcm_nvram.o
+nvmem_brcm_nvram-y			:= brcm_nvram.o
+obj-$(CONFIG_NVMEM_IMX_IIM)		+= nvmem-imx-iim.o
+nvmem-imx-iim-y				:= imx-iim.o
+obj-$(CONFIG_NVMEM_IMX_OCOTP)		+= nvmem-imx-ocotp.o
+nvmem-imx-ocotp-y			:= imx-ocotp.o
+obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvmem-imx-ocotp-scu.o
+nvmem-imx-ocotp-scu-y			:= imx-ocotp-scu.o
+obj-$(CONFIG_NVMEM_JZ4780_EFUSE)	+= nvmem_jz4780_efuse.o
+nvmem_jz4780_efuse-y			:= jz4780-efuse.o
+obj-$(CONFIG_NVMEM_LAN9662_OTPC)	+= nvmem-lan9662-otpc.o
+nvmem-lan9662-otpc-y		:= lan9662-otpc.o
+obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
+nvmem-layerscape-sfp-y			:= layerscape-sfp.o
+obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+= nvmem_lpc18xx_eeprom.o
+nvmem_lpc18xx_eeprom-y			:= lpc18xx_eeprom.o
+obj-$(CONFIG_NVMEM_LPC18XX_OTP)		+= nvmem_lpc18xx_otp.o
+nvmem_lpc18xx_otp-y			:= lpc18xx_otp.o
+obj-$(CONFIG_NVMEM_MESON_EFUSE)		+= nvmem_meson_efuse.o
+nvmem_meson_efuse-y			:= meson-efuse.o
+obj-$(CONFIG_NVMEM_MESON_MX_EFUSE)	+= nvmem_meson_mx_efuse.o
+nvmem_meson_mx_efuse-y			:= meson-mx-efuse.o
+obj-$(CONFIG_NVMEM_MICROCHIP_OTPC)	+= nvmem-microchip-otpc.o
+nvmem-microchip-otpc-y			:= microchip-otpc.o
+obj-$(CONFIG_NVMEM_MTK_EFUSE)		+= nvmem_mtk-efuse.o
+nvmem_mtk-efuse-y			:= mtk-efuse.o
+obj-$(CONFIG_NVMEM_MXS_OCOTP)		+= nvmem-mxs-ocotp.o
+nvmem-mxs-ocotp-y			:= mxs-ocotp.o
+obj-$(CONFIG_NVMEM_NINTENDO_OTP)	+= nvmem-nintendo-otp.o
+nvmem-nintendo-otp-y			:= nintendo-otp.o
+obj-$(CONFIG_NVMEM_QCOM_QFPROM)		+= nvmem_qfprom.o
+nvmem_qfprom-y				:= qfprom.o
+obj-$(CONFIG_NVMEM_RAVE_SP_EEPROM)	+= nvmem-rave-sp-eeprom.o
+nvmem-rave-sp-eeprom-y			:= rave-sp-eeprom.o
+obj-$(CONFIG_NVMEM_RMEM) 		+= nvmem-rmem.o
+nvmem-rmem-y				:= rmem.o
+obj-$(CONFIG_NVMEM_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
+nvmem_rockchip_efuse-y			:= rockchip-efuse.o
+obj-$(CONFIG_NVMEM_ROCKCHIP_OTP)	+= nvmem-rockchip-otp.o
+nvmem-rockchip-otp-y			:= rockchip-otp.o
+obj-$(CONFIG_NVMEM_SC27XX_EFUSE)	+= nvmem-sc27xx-efuse.o
+nvmem-sc27xx-efuse-y			:= sc27xx-efuse.o
+obj-$(CONFIG_NVMEM_SNVS_LPGPR)		+= nvmem_snvs_lpgpr.o
+nvmem_snvs_lpgpr-y			:= snvs_lpgpr.o
+obj-$(CONFIG_NVMEM_SPMI_SDAM)		+= nvmem_qcom-spmi-sdam.o
+nvmem_qcom-spmi-sdam-y			+= qcom-spmi-sdam.o
+obj-$(CONFIG_NVMEM_SPRD_EFUSE)		+= nvmem_sprd_efuse.o
+nvmem_sprd_efuse-y			:= sprd-efuse.o
+obj-$(CONFIG_NVMEM_STM32_ROMEM)		+= nvmem_stm32_romem.o
+nvmem_stm32_romem-y 			:= stm32-romem.o
+obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
+nvmem_sunplus_ocotp-y			:= sunplus-ocotp.o
+obj-$(CONFIG_NVMEM_SUNXI_SID)		+= nvmem_sunxi_sid.o
+nvmem_sunxi_sid-y			:= sunxi_sid.o
+obj-$(CONFIG_NVMEM_U_BOOT_ENV)		+= nvmem_u-boot-env.o
+nvmem_u-boot-env-y			:= u-boot-env.o
+obj-$(CONFIG_NVMEM_UNIPHIER_EFUSE)	+= nvmem-uniphier-efuse.o
+nvmem-uniphier-efuse-y			:= uniphier-efuse.o
+obj-$(CONFIG_NVMEM_VF610_OCOTP)		+= nvmem-vf610-ocotp.o
+nvmem-vf610-ocotp-y			:= vf610-ocotp.o
+obj-$(CONFIG_NVMEM_ZYNQMP)		+= nvmem_zynqmp_nvmem.o
+nvmem_zynqmp_nvmem-y			:= zynqmp_nvmem.o
diff --git a/drivers/nvmem/apple-efuses.c b/drivers/nvmem/apple-efuses.c
new file mode 100644
index 000000000..9b7c87102
--- /dev/null
+++ b/drivers/nvmem/apple-efuses.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Apple SoC eFuse driver
+ *
+ * Copyright (C) The Asahi Linux Contributors
+ */
+
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct apple_efuses_priv {
+	void __iomem *fuses;
+};
+
+static int apple_efuses_read(void *context, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	struct apple_efuses_priv *priv = context;
+	u32 *dst = val;
+
+	while (bytes >= sizeof(u32)) {
+		*dst++ = readl_relaxed(priv->fuses + offset);
+		bytes -= sizeof(u32);
+		offset += sizeof(u32);
+	}
+
+	return 0;
+}
+
+static int apple_efuses_probe(struct platform_device *pdev)
+{
+	struct apple_efuses_priv *priv;
+	struct resource *res;
+	struct nvmem_config config = {
+		.dev = &pdev->dev,
+		.read_only = true,
+		.reg_read = apple_efuses_read,
+		.stride = sizeof(u32),
+		.word_size = sizeof(u32),
+		.name = "apple_efuses_nvmem",
+		.id = NVMEM_DEVID_AUTO,
+		.root_only = true,
+	};
+
+	priv = devm_kzalloc(config.dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->fuses = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->fuses))
+		return PTR_ERR(priv->fuses);
+
+	config.priv = priv;
+	config.size = resource_size(res);
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config));
+}
+
+static const struct of_device_id apple_efuses_of_match[] = {
+	{ .compatible = "apple,efuses", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, apple_efuses_of_match);
+
+static struct platform_driver apple_efuses_driver = {
+	.driver = {
+		.name = "apple_efuses",
+		.of_match_table = apple_efuses_of_match,
+	},
+	.probe = apple_efuses_probe,
+};
+
+module_platform_driver(apple_efuses_driver);
+
+MODULE_AUTHOR("Sven Peter <sven@svenpeter.dev>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/bcm-ocotp.c b/drivers/nvmem/bcm-ocotp.c
new file mode 100644
index 000000000..a128c7f5e
--- /dev/null
+++ b/drivers/nvmem/bcm-ocotp.c
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2016 Broadcom
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+/*
+ * # of tries for OTP Status. The time to execute a command varies. The slowest
+ * commands are writes which also vary based on the # of bits turned on. Writing
+ * 0xffffffff takes ~3800 us.
+ */
+#define OTPC_RETRIES                 5000
+
+/* Sequence to enable OTP program */
+#define OTPC_PROG_EN_SEQ             { 0xf, 0x4, 0x8, 0xd }
+
+/* OTPC Commands */
+#define OTPC_CMD_READ                0x0
+#define OTPC_CMD_OTP_PROG_ENABLE     0x2
+#define OTPC_CMD_OTP_PROG_DISABLE    0x3
+#define OTPC_CMD_PROGRAM             0x8
+
+/* OTPC Status Bits */
+#define OTPC_STAT_CMD_DONE           BIT(1)
+#define OTPC_STAT_PROG_OK            BIT(2)
+
+/* OTPC register definition */
+#define OTPC_MODE_REG_OFFSET         0x0
+#define OTPC_MODE_REG_OTPC_MODE      0
+#define OTPC_COMMAND_OFFSET          0x4
+#define OTPC_COMMAND_COMMAND_WIDTH   6
+#define OTPC_CMD_START_OFFSET        0x8
+#define OTPC_CMD_START_START         0
+#define OTPC_CPU_STATUS_OFFSET       0xc
+#define OTPC_CPUADDR_REG_OFFSET      0x28
+#define OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH 16
+#define OTPC_CPU_WRITE_REG_OFFSET    0x2c
+
+#define OTPC_CMD_MASK  (BIT(OTPC_COMMAND_COMMAND_WIDTH) - 1)
+#define OTPC_ADDR_MASK (BIT(OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH) - 1)
+
+
+struct otpc_map {
+	/* in words. */
+	u32 otpc_row_size;
+	/* 128 bit row / 4 words support. */
+	u16 data_r_offset[4];
+	/* 128 bit row / 4 words support. */
+	u16 data_w_offset[4];
+};
+
+static struct otpc_map otp_map = {
+	.otpc_row_size = 1,
+	.data_r_offset = {0x10},
+	.data_w_offset = {0x2c},
+};
+
+static struct otpc_map otp_map_v2 = {
+	.otpc_row_size = 2,
+	.data_r_offset = {0x10, 0x5c},
+	.data_w_offset = {0x2c, 0x64},
+};
+
+struct otpc_priv {
+	struct device *dev;
+	void __iomem *base;
+	const struct otpc_map *map;
+	struct nvmem_config *config;
+};
+
+static inline void set_command(void __iomem *base, u32 command)
+{
+	writel(command & OTPC_CMD_MASK, base + OTPC_COMMAND_OFFSET);
+}
+
+static inline void set_cpu_address(void __iomem *base, u32 addr)
+{
+	writel(addr & OTPC_ADDR_MASK, base + OTPC_CPUADDR_REG_OFFSET);
+}
+
+static inline void set_start_bit(void __iomem *base)
+{
+	writel(1 << OTPC_CMD_START_START, base + OTPC_CMD_START_OFFSET);
+}
+
+static inline void reset_start_bit(void __iomem *base)
+{
+	writel(0, base + OTPC_CMD_START_OFFSET);
+}
+
+static inline void write_cpu_data(void __iomem *base, u32 value)
+{
+	writel(value, base + OTPC_CPU_WRITE_REG_OFFSET);
+}
+
+static int poll_cpu_status(void __iomem *base, u32 value)
+{
+	u32 status;
+	u32 retries;
+
+	for (retries = 0; retries < OTPC_RETRIES; retries++) {
+		status = readl(base + OTPC_CPU_STATUS_OFFSET);
+		if (status & value)
+			break;
+		udelay(1);
+	}
+	if (retries == OTPC_RETRIES)
+		return -EAGAIN;
+
+	return 0;
+}
+
+static int enable_ocotp_program(void __iomem *base)
+{
+	static const u32 vals[] = OTPC_PROG_EN_SEQ;
+	int i;
+	int ret;
+
+	/* Write the magic sequence to enable programming */
+	set_command(base, OTPC_CMD_OTP_PROG_ENABLE);
+	for (i = 0; i < ARRAY_SIZE(vals); i++) {
+		write_cpu_data(base, vals[i]);
+		set_start_bit(base);
+		ret = poll_cpu_status(base, OTPC_STAT_CMD_DONE);
+		reset_start_bit(base);
+		if (ret)
+			return ret;
+	}
+
+	return poll_cpu_status(base, OTPC_STAT_PROG_OK);
+}
+
+static int disable_ocotp_program(void __iomem *base)
+{
+	int ret;
+
+	set_command(base, OTPC_CMD_OTP_PROG_DISABLE);
+	set_start_bit(base);
+	ret = poll_cpu_status(base, OTPC_STAT_PROG_OK);
+	reset_start_bit(base);
+
+	return ret;
+}
+
+static int bcm_otpc_read(void *context, unsigned int offset, void *val,
+	size_t bytes)
+{
+	struct otpc_priv *priv = context;
+	u32 *buf = val;
+	u32 bytes_read;
+	u32 address = offset / priv->config->word_size;
+	int i, ret;
+
+	for (bytes_read = 0; bytes_read < bytes;) {
+		set_command(priv->base, OTPC_CMD_READ);
+		set_cpu_address(priv->base, address++);
+		set_start_bit(priv->base);
+		ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
+		if (ret) {
+			dev_err(priv->dev, "otp read error: 0x%x", ret);
+			return -EIO;
+		}
+
+		for (i = 0; i < priv->map->otpc_row_size; i++) {
+			*buf++ = readl(priv->base +
+					priv->map->data_r_offset[i]);
+			bytes_read += sizeof(*buf);
+		}
+
+		reset_start_bit(priv->base);
+	}
+
+	return 0;
+}
+
+static int bcm_otpc_write(void *context, unsigned int offset, void *val,
+	size_t bytes)
+{
+	struct otpc_priv *priv = context;
+	u32 *buf = val;
+	u32 bytes_written;
+	u32 address = offset / priv->config->word_size;
+	int i, ret;
+
+	if (offset % priv->config->word_size)
+		return -EINVAL;
+
+	ret = enable_ocotp_program(priv->base);
+	if (ret)
+		return -EIO;
+
+	for (bytes_written = 0; bytes_written < bytes;) {
+		set_command(priv->base, OTPC_CMD_PROGRAM);
+		set_cpu_address(priv->base, address++);
+		for (i = 0; i < priv->map->otpc_row_size; i++) {
+			writel(*buf, priv->base + priv->map->data_w_offset[i]);
+			buf++;
+			bytes_written += sizeof(*buf);
+		}
+		set_start_bit(priv->base);
+		ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE);
+		reset_start_bit(priv->base);
+		if (ret) {
+			dev_err(priv->dev, "otp write error: 0x%x", ret);
+			return -EIO;
+		}
+	}
+
+	disable_ocotp_program(priv->base);
+
+	return 0;
+}
+
+static struct nvmem_config bcm_otpc_nvmem_config = {
+	.name = "bcm-ocotp",
+	.read_only = false,
+	.word_size = 4,
+	.stride = 4,
+	.reg_read = bcm_otpc_read,
+	.reg_write = bcm_otpc_write,
+};
+
+static const struct of_device_id bcm_otpc_dt_ids[] = {
+	{ .compatible = "brcm,ocotp", .data = &otp_map },
+	{ .compatible = "brcm,ocotp-v2", .data = &otp_map_v2 },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_otpc_dt_ids);
+
+static const struct acpi_device_id bcm_otpc_acpi_ids[] __maybe_unused = {
+	{ .id = "BRCM0700", .driver_data = (kernel_ulong_t)&otp_map },
+	{ .id = "BRCM0701", .driver_data = (kernel_ulong_t)&otp_map_v2 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(acpi, bcm_otpc_acpi_ids);
+
+static int bcm_otpc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct otpc_priv *priv;
+	struct nvmem_device *nvmem;
+	int err;
+	u32 num_words;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->map = device_get_match_data(dev);
+	if (!priv->map)
+		return -ENODEV;
+
+	/* Get OTP base address register. */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base)) {
+		dev_err(dev, "unable to map I/O memory\n");
+		return PTR_ERR(priv->base);
+	}
+
+	/* Enable CPU access to OTPC. */
+	writel(readl(priv->base + OTPC_MODE_REG_OFFSET) |
+		BIT(OTPC_MODE_REG_OTPC_MODE),
+		priv->base + OTPC_MODE_REG_OFFSET);
+	reset_start_bit(priv->base);
+
+	/* Read size of memory in words. */
+	err = device_property_read_u32(dev, "brcm,ocotp-size", &num_words);
+	if (err) {
+		dev_err(dev, "size parameter not specified\n");
+		return -EINVAL;
+	} else if (num_words == 0) {
+		dev_err(dev, "size must be > 0\n");
+		return -EINVAL;
+	}
+
+	bcm_otpc_nvmem_config.size = 4 * num_words;
+	bcm_otpc_nvmem_config.dev = dev;
+	bcm_otpc_nvmem_config.priv = priv;
+
+	if (priv->map == &otp_map_v2) {
+		bcm_otpc_nvmem_config.word_size = 8;
+		bcm_otpc_nvmem_config.stride = 8;
+	}
+
+	priv->config = &bcm_otpc_nvmem_config;
+
+	nvmem = devm_nvmem_register(dev, &bcm_otpc_nvmem_config);
+	if (IS_ERR(nvmem)) {
+		dev_err(dev, "error registering nvmem config\n");
+		return PTR_ERR(nvmem);
+	}
+
+	return 0;
+}
+
+static struct platform_driver bcm_otpc_driver = {
+	.probe	= bcm_otpc_probe,
+	.driver = {
+		.name	= "brcm-otpc",
+		.of_match_table = bcm_otpc_dt_ids,
+		.acpi_match_table = ACPI_PTR(bcm_otpc_acpi_ids),
+	},
+};
+module_platform_driver(bcm_otpc_driver);
+
+MODULE_DESCRIPTION("Broadcom OTPC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/brcm_nvram.c b/drivers/nvmem/brcm_nvram.c
new file mode 100644
index 000000000..7bd65fc29
--- /dev/null
+++ b/drivers/nvmem/brcm_nvram.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define NVRAM_MAGIC			"FLSH"
+
+struct brcm_nvram {
+	struct device *dev;
+	void __iomem *base;
+	struct nvmem_cell_info *cells;
+	int ncells;
+};
+
+struct brcm_nvram_header {
+	char magic[4];
+	__le32 len;
+	__le32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+	__le32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+	__le32 config_ncdl;	/* ncdl values for memc */
+};
+
+static int brcm_nvram_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct brcm_nvram *priv = context;
+	u8 *dst = val;
+
+	while (bytes--)
+		*dst++ = readb(priv->base + offset++);
+
+	return 0;
+}
+
+static int brcm_nvram_add_cells(struct brcm_nvram *priv, uint8_t *data,
+				size_t len)
+{
+	struct device *dev = priv->dev;
+	char *var, *value, *eq;
+	int idx;
+
+	priv->ncells = 0;
+	for (var = data + sizeof(struct brcm_nvram_header);
+	     var < (char *)data + len && *var;
+	     var += strlen(var) + 1) {
+		priv->ncells++;
+	}
+
+	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
+	if (!priv->cells)
+		return -ENOMEM;
+
+	for (var = data + sizeof(struct brcm_nvram_header), idx = 0;
+	     var < (char *)data + len && *var;
+	     var = value + strlen(value) + 1, idx++) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		*eq = '\0';
+		value = eq + 1;
+
+		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
+		if (!priv->cells[idx].name)
+			return -ENOMEM;
+		priv->cells[idx].offset = value - (char *)data;
+		priv->cells[idx].bytes = strlen(value);
+		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
+	}
+
+	return 0;
+}
+
+static int brcm_nvram_parse(struct brcm_nvram *priv)
+{
+	struct device *dev = priv->dev;
+	struct brcm_nvram_header header;
+	uint8_t *data;
+	size_t len;
+	int err;
+
+	memcpy_fromio(&header, priv->base, sizeof(header));
+
+	if (memcmp(header.magic, NVRAM_MAGIC, 4)) {
+		dev_err(dev, "Invalid NVRAM magic\n");
+		return -EINVAL;
+	}
+
+	len = le32_to_cpu(header.len);
+
+	data = kzalloc(len, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	memcpy_fromio(data, priv->base, len);
+	data[len - 1] = '\0';
+
+	err = brcm_nvram_add_cells(priv, data, len);
+	if (err) {
+		dev_err(dev, "Failed to add cells: %d\n", err);
+		return err;
+	}
+
+	kfree(data);
+
+	return 0;
+}
+
+static int brcm_nvram_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.name = "brcm-nvram",
+		.reg_read = brcm_nvram_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct brcm_nvram *priv;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	err = brcm_nvram_parse(priv);
+	if (err)
+		return err;
+
+	config.dev = dev;
+	config.cells = priv->cells;
+	config.ncells = priv->ncells;
+	config.priv = priv;
+	config.size = resource_size(res);
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static const struct of_device_id brcm_nvram_of_match_table[] = {
+	{ .compatible = "brcm,nvram", },
+	{},
+};
+
+static struct platform_driver brcm_nvram_driver = {
+	.probe = brcm_nvram_probe,
+	.driver = {
+		.name = "brcm_nvram",
+		.of_match_table = brcm_nvram_of_match_table,
+	},
+};
+
+static int __init brcm_nvram_init(void)
+{
+	return platform_driver_register(&brcm_nvram_driver);
+}
+
+subsys_initcall_sync(brcm_nvram_init);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, brcm_nvram_of_match_table);
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
new file mode 100644
index 000000000..34ee9d36e
--- /dev/null
+++ b/drivers/nvmem/core.c
@@ -0,0 +1,1958 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * nvmem framework core.
+ *
+ * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+ * Copyright (C) 2013 Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/fs.h>
+#include <linux/idr.h>
+#include <linux/init.h>
+#include <linux/kref.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+
+struct nvmem_device {
+	struct module		*owner;
+	struct device		dev;
+	int			stride;
+	int			word_size;
+	int			id;
+	struct kref		refcnt;
+	size_t			size;
+	bool			read_only;
+	bool			root_only;
+	int			flags;
+	enum nvmem_type		type;
+	struct bin_attribute	eeprom;
+	struct device		*base_dev;
+	struct list_head	cells;
+	const struct nvmem_keepout *keepout;
+	unsigned int		nkeepout;
+	nvmem_reg_read_t	reg_read;
+	nvmem_reg_write_t	reg_write;
+	nvmem_cell_post_process_t cell_post_process;
+	struct gpio_desc	*wp_gpio;
+	void *priv;
+};
+
+#define to_nvmem_device(d) container_of(d, struct nvmem_device, dev)
+
+#define FLAG_COMPAT		BIT(0)
+struct nvmem_cell_entry {
+	const char		*name;
+	int			offset;
+	int			bytes;
+	int			bit_offset;
+	int			nbits;
+	struct device_node	*np;
+	struct nvmem_device	*nvmem;
+	struct list_head	node;
+};
+
+struct nvmem_cell {
+	struct nvmem_cell_entry *entry;
+	const char		*id;
+};
+
+static DEFINE_MUTEX(nvmem_mutex);
+static DEFINE_IDA(nvmem_ida);
+
+static DEFINE_MUTEX(nvmem_cell_mutex);
+static LIST_HEAD(nvmem_cell_tables);
+
+static DEFINE_MUTEX(nvmem_lookup_mutex);
+static LIST_HEAD(nvmem_lookup_list);
+
+static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
+
+static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	if (nvmem->reg_read)
+		return nvmem->reg_read(nvmem->priv, offset, val, bytes);
+
+	return -EINVAL;
+}
+
+static int __nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	int ret;
+
+	if (nvmem->reg_write) {
+		gpiod_set_value_cansleep(nvmem->wp_gpio, 0);
+		ret = nvmem->reg_write(nvmem->priv, offset, val, bytes);
+		gpiod_set_value_cansleep(nvmem->wp_gpio, 1);
+		return ret;
+	}
+
+	return -EINVAL;
+}
+
+static int nvmem_access_with_keepouts(struct nvmem_device *nvmem,
+				      unsigned int offset, void *val,
+				      size_t bytes, int write)
+{
+
+	unsigned int end = offset + bytes;
+	unsigned int kend, ksize;
+	const struct nvmem_keepout *keepout = nvmem->keepout;
+	const struct nvmem_keepout *keepoutend = keepout + nvmem->nkeepout;
+	int rc;
+
+	/*
+	 * Skip all keepouts before the range being accessed.
+	 * Keepouts are sorted.
+	 */
+	while ((keepout < keepoutend) && (keepout->end <= offset))
+		keepout++;
+
+	while ((offset < end) && (keepout < keepoutend)) {
+		/* Access the valid portion before the keepout. */
+		if (offset < keepout->start) {
+			kend = min(end, keepout->start);
+			ksize = kend - offset;
+			if (write)
+				rc = __nvmem_reg_write(nvmem, offset, val, ksize);
+			else
+				rc = __nvmem_reg_read(nvmem, offset, val, ksize);
+
+			if (rc)
+				return rc;
+
+			offset += ksize;
+			val += ksize;
+		}
+
+		/*
+		 * Now we're aligned to the start of this keepout zone. Go
+		 * through it.
+		 */
+		kend = min(end, keepout->end);
+		ksize = kend - offset;
+		if (!write)
+			memset(val, keepout->value, ksize);
+
+		val += ksize;
+		offset += ksize;
+		keepout++;
+	}
+
+	/*
+	 * If we ran out of keepouts but there's still stuff to do, send it
+	 * down directly
+	 */
+	if (offset < end) {
+		ksize = end - offset;
+		if (write)
+			return __nvmem_reg_write(nvmem, offset, val, ksize);
+		else
+			return __nvmem_reg_read(nvmem, offset, val, ksize);
+	}
+
+	return 0;
+}
+
+static int nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
+			  void *val, size_t bytes)
+{
+	if (!nvmem->nkeepout)
+		return __nvmem_reg_read(nvmem, offset, val, bytes);
+
+	return nvmem_access_with_keepouts(nvmem, offset, val, bytes, false);
+}
+
+static int nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
+			   void *val, size_t bytes)
+{
+	if (!nvmem->nkeepout)
+		return __nvmem_reg_write(nvmem, offset, val, bytes);
+
+	return nvmem_access_with_keepouts(nvmem, offset, val, bytes, true);
+}
+
+#ifdef CONFIG_NVMEM_SYSFS
+static const char * const nvmem_type_str[] = {
+	[NVMEM_TYPE_UNKNOWN] = "Unknown",
+	[NVMEM_TYPE_EEPROM] = "EEPROM",
+	[NVMEM_TYPE_OTP] = "OTP",
+	[NVMEM_TYPE_BATTERY_BACKED] = "Battery backed",
+	[NVMEM_TYPE_FRAM] = "FRAM",
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key eeprom_lock_key;
+#endif
+
+static ssize_t type_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
+{
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	return sprintf(buf, "%s\n", nvmem_type_str[nvmem->type]);
+}
+
+static DEVICE_ATTR_RO(type);
+
+static struct attribute *nvmem_attrs[] = {
+	&dev_attr_type.attr,
+	NULL,
+};
+
+static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj,
+				   struct bin_attribute *attr, char *buf,
+				   loff_t pos, size_t count)
+{
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	int rc;
+
+	if (attr->private)
+		dev = attr->private;
+	else
+		dev = kobj_to_dev(kobj);
+	nvmem = to_nvmem_device(dev);
+
+	/* Stop the user from reading */
+	if (pos >= nvmem->size)
+		return 0;
+
+	if (!IS_ALIGNED(pos, nvmem->stride))
+		return -EINVAL;
+
+	if (count < nvmem->word_size)
+		return -EINVAL;
+
+	if (pos + count > nvmem->size)
+		count = nvmem->size - pos;
+
+	count = round_down(count, nvmem->word_size);
+
+	if (!nvmem->reg_read)
+		return -EPERM;
+
+	rc = nvmem_reg_read(nvmem, pos, buf, count);
+
+	if (rc)
+		return rc;
+
+	return count;
+}
+
+static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj,
+				    struct bin_attribute *attr, char *buf,
+				    loff_t pos, size_t count)
+{
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	int rc;
+
+	if (attr->private)
+		dev = attr->private;
+	else
+		dev = kobj_to_dev(kobj);
+	nvmem = to_nvmem_device(dev);
+
+	/* Stop the user from writing */
+	if (pos >= nvmem->size)
+		return -EFBIG;
+
+	if (!IS_ALIGNED(pos, nvmem->stride))
+		return -EINVAL;
+
+	if (count < nvmem->word_size)
+		return -EINVAL;
+
+	if (pos + count > nvmem->size)
+		count = nvmem->size - pos;
+
+	count = round_down(count, nvmem->word_size);
+
+	if (!nvmem->reg_write)
+		return -EPERM;
+
+	rc = nvmem_reg_write(nvmem, pos, buf, count);
+
+	if (rc)
+		return rc;
+
+	return count;
+}
+
+static umode_t nvmem_bin_attr_get_umode(struct nvmem_device *nvmem)
+{
+	umode_t mode = 0400;
+
+	if (!nvmem->root_only)
+		mode |= 0044;
+
+	if (!nvmem->read_only)
+		mode |= 0200;
+
+	if (!nvmem->reg_write)
+		mode &= ~0200;
+
+	if (!nvmem->reg_read)
+		mode &= ~0444;
+
+	return mode;
+}
+
+static umode_t nvmem_bin_attr_is_visible(struct kobject *kobj,
+					 struct bin_attribute *attr, int i)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	attr->size = nvmem->size;
+
+	return nvmem_bin_attr_get_umode(nvmem);
+}
+
+/* default read/write permissions */
+static struct bin_attribute bin_attr_rw_nvmem = {
+	.attr	= {
+		.name	= "nvmem",
+		.mode	= 0644,
+	},
+	.read	= bin_attr_nvmem_read,
+	.write	= bin_attr_nvmem_write,
+};
+
+static struct bin_attribute *nvmem_bin_attributes[] = {
+	&bin_attr_rw_nvmem,
+	NULL,
+};
+
+static const struct attribute_group nvmem_bin_group = {
+	.bin_attrs	= nvmem_bin_attributes,
+	.attrs		= nvmem_attrs,
+	.is_bin_visible = nvmem_bin_attr_is_visible,
+};
+
+static const struct attribute_group *nvmem_dev_groups[] = {
+	&nvmem_bin_group,
+	NULL,
+};
+
+static struct bin_attribute bin_attr_nvmem_eeprom_compat = {
+	.attr	= {
+		.name	= "eeprom",
+	},
+	.read	= bin_attr_nvmem_read,
+	.write	= bin_attr_nvmem_write,
+};
+
+/*
+ * nvmem_setup_compat() - Create an additional binary entry in
+ * drivers sys directory, to be backwards compatible with the older
+ * drivers/misc/eeprom drivers.
+ */
+static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
+				    const struct nvmem_config *config)
+{
+	int rval;
+
+	if (!config->compat)
+		return 0;
+
+	if (!config->base_dev)
+		return -EINVAL;
+
+	if (config->type == NVMEM_TYPE_FRAM)
+		bin_attr_nvmem_eeprom_compat.attr.name = "fram";
+
+	nvmem->eeprom = bin_attr_nvmem_eeprom_compat;
+	nvmem->eeprom.attr.mode = nvmem_bin_attr_get_umode(nvmem);
+	nvmem->eeprom.size = nvmem->size;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	nvmem->eeprom.attr.key = &eeprom_lock_key;
+#endif
+	nvmem->eeprom.private = &nvmem->dev;
+	nvmem->base_dev = config->base_dev;
+
+	rval = device_create_bin_file(nvmem->base_dev, &nvmem->eeprom);
+	if (rval) {
+		dev_err(&nvmem->dev,
+			"Failed to create eeprom binary file %d\n", rval);
+		return rval;
+	}
+
+	nvmem->flags |= FLAG_COMPAT;
+
+	return 0;
+}
+
+static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
+			      const struct nvmem_config *config)
+{
+	if (config->compat)
+		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
+}
+
+#else /* CONFIG_NVMEM_SYSFS */
+
+static int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem,
+				    const struct nvmem_config *config)
+{
+	return -ENOSYS;
+}
+static void nvmem_sysfs_remove_compat(struct nvmem_device *nvmem,
+				      const struct nvmem_config *config)
+{
+}
+
+#endif /* CONFIG_NVMEM_SYSFS */
+
+static void nvmem_release(struct device *dev)
+{
+	struct nvmem_device *nvmem = to_nvmem_device(dev);
+
+	ida_free(&nvmem_ida, nvmem->id);
+	gpiod_put(nvmem->wp_gpio);
+	kfree(nvmem);
+}
+
+static const struct device_type nvmem_provider_type = {
+	.release	= nvmem_release,
+};
+
+static struct bus_type nvmem_bus_type = {
+	.name		= "nvmem",
+};
+
+static void nvmem_cell_entry_drop(struct nvmem_cell_entry *cell)
+{
+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_CELL_REMOVE, cell);
+	mutex_lock(&nvmem_mutex);
+	list_del(&cell->node);
+	mutex_unlock(&nvmem_mutex);
+	of_node_put(cell->np);
+	kfree_const(cell->name);
+	kfree(cell);
+}
+
+static void nvmem_device_remove_all_cells(const struct nvmem_device *nvmem)
+{
+	struct nvmem_cell_entry *cell, *p;
+
+	list_for_each_entry_safe(cell, p, &nvmem->cells, node)
+		nvmem_cell_entry_drop(cell);
+}
+
+static void nvmem_cell_entry_add(struct nvmem_cell_entry *cell)
+{
+	mutex_lock(&nvmem_mutex);
+	list_add_tail(&cell->node, &cell->nvmem->cells);
+	mutex_unlock(&nvmem_mutex);
+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_CELL_ADD, cell);
+}
+
+static int nvmem_cell_info_to_nvmem_cell_entry_nodup(struct nvmem_device *nvmem,
+						     const struct nvmem_cell_info *info,
+						     struct nvmem_cell_entry *cell)
+{
+	cell->nvmem = nvmem;
+	cell->offset = info->offset;
+	cell->bytes = info->bytes;
+	cell->name = info->name;
+
+	cell->bit_offset = info->bit_offset;
+	cell->nbits = info->nbits;
+	cell->np = info->np;
+
+	if (cell->nbits)
+		cell->bytes = DIV_ROUND_UP(cell->nbits + cell->bit_offset,
+					   BITS_PER_BYTE);
+
+	if (!IS_ALIGNED(cell->offset, nvmem->stride)) {
+		dev_err(&nvmem->dev,
+			"cell %s unaligned to nvmem stride %d\n",
+			cell->name ?: "<unknown>", nvmem->stride);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int nvmem_cell_info_to_nvmem_cell_entry(struct nvmem_device *nvmem,
+					       const struct nvmem_cell_info *info,
+					       struct nvmem_cell_entry *cell)
+{
+	int err;
+
+	err = nvmem_cell_info_to_nvmem_cell_entry_nodup(nvmem, info, cell);
+	if (err)
+		return err;
+
+	cell->name = kstrdup_const(info->name, GFP_KERNEL);
+	if (!cell->name)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/**
+ * nvmem_add_cells() - Add cell information to an nvmem device
+ *
+ * @nvmem: nvmem device to add cells to.
+ * @info: nvmem cell info to add to the device
+ * @ncells: number of cells in info
+ *
+ * Return: 0 or negative error code on failure.
+ */
+static int nvmem_add_cells(struct nvmem_device *nvmem,
+		    const struct nvmem_cell_info *info,
+		    int ncells)
+{
+	struct nvmem_cell_entry **cells;
+	int i, rval;
+
+	cells = kcalloc(ncells, sizeof(*cells), GFP_KERNEL);
+	if (!cells)
+		return -ENOMEM;
+
+	for (i = 0; i < ncells; i++) {
+		cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL);
+		if (!cells[i]) {
+			rval = -ENOMEM;
+			goto err;
+		}
+
+		rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, &info[i], cells[i]);
+		if (rval) {
+			kfree(cells[i]);
+			goto err;
+		}
+
+		nvmem_cell_entry_add(cells[i]);
+	}
+
+	/* remove tmp array */
+	kfree(cells);
+
+	return 0;
+err:
+	while (i--)
+		nvmem_cell_entry_drop(cells[i]);
+
+	kfree(cells);
+
+	return rval;
+}
+
+/**
+ * nvmem_register_notifier() - Register a notifier block for nvmem events.
+ *
+ * @nb: notifier block to be called on nvmem events.
+ *
+ * Return: 0 on success, negative error number on failure.
+ */
+int nvmem_register_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&nvmem_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(nvmem_register_notifier);
+
+/**
+ * nvmem_unregister_notifier() - Unregister a notifier block for nvmem events.
+ *
+ * @nb: notifier block to be unregistered.
+ *
+ * Return: 0 on success, negative error number on failure.
+ */
+int nvmem_unregister_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&nvmem_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(nvmem_unregister_notifier);
+
+static int nvmem_add_cells_from_table(struct nvmem_device *nvmem)
+{
+	const struct nvmem_cell_info *info;
+	struct nvmem_cell_table *table;
+	struct nvmem_cell_entry *cell;
+	int rval = 0, i;
+
+	mutex_lock(&nvmem_cell_mutex);
+	list_for_each_entry(table, &nvmem_cell_tables, node) {
+		if (strcmp(nvmem_dev_name(nvmem), table->nvmem_name) == 0) {
+			for (i = 0; i < table->ncells; i++) {
+				info = &table->cells[i];
+
+				cell = kzalloc(sizeof(*cell), GFP_KERNEL);
+				if (!cell) {
+					rval = -ENOMEM;
+					goto out;
+				}
+
+				rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, info, cell);
+				if (rval) {
+					kfree(cell);
+					goto out;
+				}
+
+				nvmem_cell_entry_add(cell);
+			}
+		}
+	}
+
+out:
+	mutex_unlock(&nvmem_cell_mutex);
+	return rval;
+}
+
+static struct nvmem_cell_entry *
+nvmem_find_cell_entry_by_name(struct nvmem_device *nvmem, const char *cell_id)
+{
+	struct nvmem_cell_entry *iter, *cell = NULL;
+
+	mutex_lock(&nvmem_mutex);
+	list_for_each_entry(iter, &nvmem->cells, node) {
+		if (strcmp(cell_id, iter->name) == 0) {
+			cell = iter;
+			break;
+		}
+	}
+	mutex_unlock(&nvmem_mutex);
+
+	return cell;
+}
+
+static int nvmem_validate_keepouts(struct nvmem_device *nvmem)
+{
+	unsigned int cur = 0;
+	const struct nvmem_keepout *keepout = nvmem->keepout;
+	const struct nvmem_keepout *keepoutend = keepout + nvmem->nkeepout;
+
+	while (keepout < keepoutend) {
+		/* Ensure keepouts are sorted and don't overlap. */
+		if (keepout->start < cur) {
+			dev_err(&nvmem->dev,
+				"Keepout regions aren't sorted or overlap.\n");
+
+			return -ERANGE;
+		}
+
+		if (keepout->end < keepout->start) {
+			dev_err(&nvmem->dev,
+				"Invalid keepout region.\n");
+
+			return -EINVAL;
+		}
+
+		/*
+		 * Validate keepouts (and holes between) don't violate
+		 * word_size constraints.
+		 */
+		if ((keepout->end - keepout->start < nvmem->word_size) ||
+		    ((keepout->start != cur) &&
+		     (keepout->start - cur < nvmem->word_size))) {
+
+			dev_err(&nvmem->dev,
+				"Keepout regions violate word_size constraints.\n");
+
+			return -ERANGE;
+		}
+
+		/* Validate keepouts don't violate stride (alignment). */
+		if (!IS_ALIGNED(keepout->start, nvmem->stride) ||
+		    !IS_ALIGNED(keepout->end, nvmem->stride)) {
+
+			dev_err(&nvmem->dev,
+				"Keepout regions violate stride.\n");
+
+			return -EINVAL;
+		}
+
+		cur = keepout->end;
+		keepout++;
+	}
+
+	return 0;
+}
+
+static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
+{
+	struct device_node *parent, *child;
+	struct device *dev = &nvmem->dev;
+	struct nvmem_cell_entry *cell;
+	const __be32 *addr;
+	int len;
+
+	parent = dev->of_node;
+
+	for_each_child_of_node(parent, child) {
+		addr = of_get_property(child, "reg", &len);
+		if (!addr)
+			continue;
+		if (len < 2 * sizeof(u32)) {
+			dev_err(dev, "nvmem: invalid reg on %pOF\n", child);
+			of_node_put(child);
+			return -EINVAL;
+		}
+
+		cell = kzalloc(sizeof(*cell), GFP_KERNEL);
+		if (!cell) {
+			of_node_put(child);
+			return -ENOMEM;
+		}
+
+		cell->nvmem = nvmem;
+		cell->offset = be32_to_cpup(addr++);
+		cell->bytes = be32_to_cpup(addr);
+		cell->name = kasprintf(GFP_KERNEL, "%pOFn", child);
+
+		addr = of_get_property(child, "bits", &len);
+		if (addr && len == (2 * sizeof(u32))) {
+			cell->bit_offset = be32_to_cpup(addr++);
+			cell->nbits = be32_to_cpup(addr);
+		}
+
+		if (cell->nbits)
+			cell->bytes = DIV_ROUND_UP(
+					cell->nbits + cell->bit_offset,
+					BITS_PER_BYTE);
+
+		if (!IS_ALIGNED(cell->offset, nvmem->stride)) {
+			dev_err(dev, "cell %s unaligned to nvmem stride %d\n",
+				cell->name, nvmem->stride);
+			/* Cells already added will be freed later. */
+			kfree_const(cell->name);
+			kfree(cell);
+			of_node_put(child);
+			return -EINVAL;
+		}
+
+		cell->np = of_node_get(child);
+		nvmem_cell_entry_add(cell);
+	}
+
+	return 0;
+}
+
+/**
+ * nvmem_register() - Register a nvmem device for given nvmem_config.
+ * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
+ *
+ * @config: nvmem device configuration with which nvmem device is created.
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer to nvmem_device
+ * on success.
+ */
+
+struct nvmem_device *nvmem_register(const struct nvmem_config *config)
+{
+	struct nvmem_device *nvmem;
+	int rval;
+
+	if (!config->dev)
+		return ERR_PTR(-EINVAL);
+
+	if (!config->reg_read && !config->reg_write)
+		return ERR_PTR(-EINVAL);
+
+	nvmem = kzalloc(sizeof(*nvmem), GFP_KERNEL);
+	if (!nvmem)
+		return ERR_PTR(-ENOMEM);
+
+	rval  = ida_alloc(&nvmem_ida, GFP_KERNEL);
+	if (rval < 0) {
+		kfree(nvmem);
+		return ERR_PTR(rval);
+	}
+
+	nvmem->id = rval;
+
+	nvmem->dev.type = &nvmem_provider_type;
+	nvmem->dev.bus = &nvmem_bus_type;
+	nvmem->dev.parent = config->dev;
+
+	device_initialize(&nvmem->dev);
+
+	if (!config->ignore_wp)
+		nvmem->wp_gpio = gpiod_get_optional(config->dev, "wp",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(nvmem->wp_gpio)) {
+		rval = PTR_ERR(nvmem->wp_gpio);
+		nvmem->wp_gpio = NULL;
+		goto err_put_device;
+	}
+
+	kref_init(&nvmem->refcnt);
+	INIT_LIST_HEAD(&nvmem->cells);
+
+	nvmem->owner = config->owner;
+	if (!nvmem->owner && config->dev->driver)
+		nvmem->owner = config->dev->driver->owner;
+	nvmem->stride = config->stride ?: 1;
+	nvmem->word_size = config->word_size ?: 1;
+	nvmem->size = config->size;
+	nvmem->root_only = config->root_only;
+	nvmem->priv = config->priv;
+	nvmem->type = config->type;
+	nvmem->reg_read = config->reg_read;
+	nvmem->reg_write = config->reg_write;
+	nvmem->cell_post_process = config->cell_post_process;
+	nvmem->keepout = config->keepout;
+	nvmem->nkeepout = config->nkeepout;
+	if (config->of_node)
+		nvmem->dev.of_node = config->of_node;
+	else if (!config->no_of_node)
+		nvmem->dev.of_node = config->dev->of_node;
+
+	switch (config->id) {
+	case NVMEM_DEVID_NONE:
+		rval = dev_set_name(&nvmem->dev, "%s", config->name);
+		break;
+	case NVMEM_DEVID_AUTO:
+		rval = dev_set_name(&nvmem->dev, "%s%d", config->name, nvmem->id);
+		break;
+	default:
+		rval = dev_set_name(&nvmem->dev, "%s%d",
+			     config->name ? : "nvmem",
+			     config->name ? config->id : nvmem->id);
+		break;
+	}
+
+	if (rval)
+		goto err_put_device;
+
+	nvmem->read_only = device_property_present(config->dev, "read-only") ||
+			   config->read_only || !nvmem->reg_write;
+
+#ifdef CONFIG_NVMEM_SYSFS
+	nvmem->dev.groups = nvmem_dev_groups;
+#endif
+
+	if (nvmem->nkeepout) {
+		rval = nvmem_validate_keepouts(nvmem);
+		if (rval)
+			goto err_put_device;
+	}
+
+	if (config->compat) {
+		rval = nvmem_sysfs_setup_compat(nvmem, config);
+		if (rval)
+			goto err_put_device;
+	}
+
+	if (config->cells) {
+		rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
+		if (rval)
+			goto err_remove_cells;
+	}
+
+	rval = nvmem_add_cells_from_table(nvmem);
+	if (rval)
+		goto err_remove_cells;
+
+	rval = nvmem_add_cells_from_of(nvmem);
+	if (rval)
+		goto err_remove_cells;
+
+	dev_dbg(&nvmem->dev, "Registering nvmem device %s\n", config->name);
+
+	rval = device_add(&nvmem->dev);
+	if (rval)
+		goto err_remove_cells;
+
+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
+
+	return nvmem;
+
+err_remove_cells:
+	nvmem_device_remove_all_cells(nvmem);
+	if (config->compat)
+		nvmem_sysfs_remove_compat(nvmem, config);
+err_put_device:
+	put_device(&nvmem->dev);
+
+	return ERR_PTR(rval);
+}
+EXPORT_SYMBOL_GPL(nvmem_register);
+
+static void nvmem_device_release(struct kref *kref)
+{
+	struct nvmem_device *nvmem;
+
+	nvmem = container_of(kref, struct nvmem_device, refcnt);
+
+	blocking_notifier_call_chain(&nvmem_notifier, NVMEM_REMOVE, nvmem);
+
+	if (nvmem->flags & FLAG_COMPAT)
+		device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
+
+	nvmem_device_remove_all_cells(nvmem);
+	device_unregister(&nvmem->dev);
+}
+
+/**
+ * nvmem_unregister() - Unregister previously registered nvmem device
+ *
+ * @nvmem: Pointer to previously registered nvmem device.
+ */
+void nvmem_unregister(struct nvmem_device *nvmem)
+{
+	if (nvmem)
+		kref_put(&nvmem->refcnt, nvmem_device_release);
+}
+EXPORT_SYMBOL_GPL(nvmem_unregister);
+
+static void devm_nvmem_unregister(void *nvmem)
+{
+	nvmem_unregister(nvmem);
+}
+
+/**
+ * devm_nvmem_register() - Register a managed nvmem device for given
+ * nvmem_config.
+ * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
+ *
+ * @dev: Device that uses the nvmem device.
+ * @config: nvmem device configuration with which nvmem device is created.
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer to nvmem_device
+ * on success.
+ */
+struct nvmem_device *devm_nvmem_register(struct device *dev,
+					 const struct nvmem_config *config)
+{
+	struct nvmem_device *nvmem;
+	int ret;
+
+	nvmem = nvmem_register(config);
+	if (IS_ERR(nvmem))
+		return nvmem;
+
+	ret = devm_add_action_or_reset(dev, devm_nvmem_unregister, nvmem);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return nvmem;
+}
+EXPORT_SYMBOL_GPL(devm_nvmem_register);
+
+static struct nvmem_device *__nvmem_device_get(void *data,
+			int (*match)(struct device *dev, const void *data))
+{
+	struct nvmem_device *nvmem = NULL;
+	struct device *dev;
+
+	mutex_lock(&nvmem_mutex);
+	dev = bus_find_device(&nvmem_bus_type, NULL, data, match);
+	if (dev)
+		nvmem = to_nvmem_device(dev);
+	mutex_unlock(&nvmem_mutex);
+	if (!nvmem)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	if (!try_module_get(nvmem->owner)) {
+		dev_err(&nvmem->dev,
+			"could not increase module refcount for cell %s\n",
+			nvmem_dev_name(nvmem));
+
+		put_device(&nvmem->dev);
+		return ERR_PTR(-EINVAL);
+	}
+
+	kref_get(&nvmem->refcnt);
+
+	return nvmem;
+}
+
+static void __nvmem_device_put(struct nvmem_device *nvmem)
+{
+	put_device(&nvmem->dev);
+	module_put(nvmem->owner);
+	kref_put(&nvmem->refcnt, nvmem_device_release);
+}
+
+#if IS_ENABLED(CONFIG_OF)
+/**
+ * of_nvmem_device_get() - Get nvmem device from a given id
+ *
+ * @np: Device tree node that uses the nvmem device.
+ * @id: nvmem name from nvmem-names property.
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device
+ * on success.
+ */
+struct nvmem_device *of_nvmem_device_get(struct device_node *np, const char *id)
+{
+
+	struct device_node *nvmem_np;
+	struct nvmem_device *nvmem;
+	int index = 0;
+
+	if (id)
+		index = of_property_match_string(np, "nvmem-names", id);
+
+	nvmem_np = of_parse_phandle(np, "nvmem", index);
+	if (!nvmem_np)
+		return ERR_PTR(-ENOENT);
+
+	nvmem = __nvmem_device_get(nvmem_np, device_match_of_node);
+	of_node_put(nvmem_np);
+	return nvmem;
+}
+EXPORT_SYMBOL_GPL(of_nvmem_device_get);
+#endif
+
+/**
+ * nvmem_device_get() - Get nvmem device from a given id
+ *
+ * @dev: Device that uses the nvmem device.
+ * @dev_name: name of the requested nvmem device.
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device
+ * on success.
+ */
+struct nvmem_device *nvmem_device_get(struct device *dev, const char *dev_name)
+{
+	if (dev->of_node) { /* try dt first */
+		struct nvmem_device *nvmem;
+
+		nvmem = of_nvmem_device_get(dev->of_node, dev_name);
+
+		if (!IS_ERR(nvmem) || PTR_ERR(nvmem) == -EPROBE_DEFER)
+			return nvmem;
+
+	}
+
+	return __nvmem_device_get((void *)dev_name, device_match_name);
+}
+EXPORT_SYMBOL_GPL(nvmem_device_get);
+
+/**
+ * nvmem_device_find() - Find nvmem device with matching function
+ *
+ * @data: Data to pass to match function
+ * @match: Callback function to check device
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device
+ * on success.
+ */
+struct nvmem_device *nvmem_device_find(void *data,
+			int (*match)(struct device *dev, const void *data))
+{
+	return __nvmem_device_get(data, match);
+}
+EXPORT_SYMBOL_GPL(nvmem_device_find);
+
+static int devm_nvmem_device_match(struct device *dev, void *res, void *data)
+{
+	struct nvmem_device **nvmem = res;
+
+	if (WARN_ON(!nvmem || !*nvmem))
+		return 0;
+
+	return *nvmem == data;
+}
+
+static void devm_nvmem_device_release(struct device *dev, void *res)
+{
+	nvmem_device_put(*(struct nvmem_device **)res);
+}
+
+/**
+ * devm_nvmem_device_put() - put alredy got nvmem device
+ *
+ * @dev: Device that uses the nvmem device.
+ * @nvmem: pointer to nvmem device allocated by devm_nvmem_cell_get(),
+ * that needs to be released.
+ */
+void devm_nvmem_device_put(struct device *dev, struct nvmem_device *nvmem)
+{
+	int ret;
+
+	ret = devres_release(dev, devm_nvmem_device_release,
+			     devm_nvmem_device_match, nvmem);
+
+	WARN_ON(ret);
+}
+EXPORT_SYMBOL_GPL(devm_nvmem_device_put);
+
+/**
+ * nvmem_device_put() - put alredy got nvmem device
+ *
+ * @nvmem: pointer to nvmem device that needs to be released.
+ */
+void nvmem_device_put(struct nvmem_device *nvmem)
+{
+	__nvmem_device_put(nvmem);
+}
+EXPORT_SYMBOL_GPL(nvmem_device_put);
+
+/**
+ * devm_nvmem_device_get() - Get nvmem cell of device form a given id
+ *
+ * @dev: Device that requests the nvmem device.
+ * @id: name id for the requested nvmem device.
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_cell
+ * on success.  The nvmem_cell will be freed by the automatically once the
+ * device is freed.
+ */
+struct nvmem_device *devm_nvmem_device_get(struct device *dev, const char *id)
+{
+	struct nvmem_device **ptr, *nvmem;
+
+	ptr = devres_alloc(devm_nvmem_device_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	nvmem = nvmem_device_get(dev, id);
+	if (!IS_ERR(nvmem)) {
+		*ptr = nvmem;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return nvmem;
+}
+EXPORT_SYMBOL_GPL(devm_nvmem_device_get);
+
+static struct nvmem_cell *nvmem_create_cell(struct nvmem_cell_entry *entry, const char *id)
+{
+	struct nvmem_cell *cell;
+	const char *name = NULL;
+
+	cell = kzalloc(sizeof(*cell), GFP_KERNEL);
+	if (!cell)
+		return ERR_PTR(-ENOMEM);
+
+	if (id) {
+		name = kstrdup_const(id, GFP_KERNEL);
+		if (!name) {
+			kfree(cell);
+			return ERR_PTR(-ENOMEM);
+		}
+	}
+
+	cell->id = name;
+	cell->entry = entry;
+
+	return cell;
+}
+
+static struct nvmem_cell *
+nvmem_cell_get_from_lookup(struct device *dev, const char *con_id)
+{
+	struct nvmem_cell_entry *cell_entry;
+	struct nvmem_cell *cell = ERR_PTR(-ENOENT);
+	struct nvmem_cell_lookup *lookup;
+	struct nvmem_device *nvmem;
+	const char *dev_id;
+
+	if (!dev)
+		return ERR_PTR(-EINVAL);
+
+	dev_id = dev_name(dev);
+
+	mutex_lock(&nvmem_lookup_mutex);
+
+	list_for_each_entry(lookup, &nvmem_lookup_list, node) {
+		if ((strcmp(lookup->dev_id, dev_id) == 0) &&
+		    (strcmp(lookup->con_id, con_id) == 0)) {
+			/* This is the right entry. */
+			nvmem = __nvmem_device_get((void *)lookup->nvmem_name,
+						   device_match_name);
+			if (IS_ERR(nvmem)) {
+				/* Provider may not be registered yet. */
+				cell = ERR_CAST(nvmem);
+				break;
+			}
+
+			cell_entry = nvmem_find_cell_entry_by_name(nvmem,
+								   lookup->cell_name);
+			if (!cell_entry) {
+				__nvmem_device_put(nvmem);
+				cell = ERR_PTR(-ENOENT);
+			} else {
+				cell = nvmem_create_cell(cell_entry, con_id);
+				if (IS_ERR(cell))
+					__nvmem_device_put(nvmem);
+			}
+			break;
+		}
+	}
+
+	mutex_unlock(&nvmem_lookup_mutex);
+	return cell;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static struct nvmem_cell_entry *
+nvmem_find_cell_entry_by_node(struct nvmem_device *nvmem, struct device_node *np)
+{
+	struct nvmem_cell_entry *iter, *cell = NULL;
+
+	mutex_lock(&nvmem_mutex);
+	list_for_each_entry(iter, &nvmem->cells, node) {
+		if (np == iter->np) {
+			cell = iter;
+			break;
+		}
+	}
+	mutex_unlock(&nvmem_mutex);
+
+	return cell;
+}
+
+/**
+ * of_nvmem_cell_get() - Get a nvmem cell from given device node and cell id
+ *
+ * @np: Device tree node that uses the nvmem cell.
+ * @id: nvmem cell name from nvmem-cell-names property, or NULL
+ *      for the cell at index 0 (the lone cell with no accompanying
+ *      nvmem-cell-names property).
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer
+ * to a struct nvmem_cell.  The nvmem_cell will be freed by the
+ * nvmem_cell_put().
+ */
+struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id)
+{
+	struct device_node *cell_np, *nvmem_np;
+	struct nvmem_device *nvmem;
+	struct nvmem_cell_entry *cell_entry;
+	struct nvmem_cell *cell;
+	int index = 0;
+
+	/* if cell name exists, find index to the name */
+	if (id)
+		index = of_property_match_string(np, "nvmem-cell-names", id);
+
+	cell_np = of_parse_phandle(np, "nvmem-cells", index);
+	if (!cell_np)
+		return ERR_PTR(-ENOENT);
+
+	nvmem_np = of_get_parent(cell_np);
+	if (!nvmem_np) {
+		of_node_put(cell_np);
+		return ERR_PTR(-EINVAL);
+	}
+
+	nvmem = __nvmem_device_get(nvmem_np, device_match_of_node);
+	of_node_put(nvmem_np);
+	if (IS_ERR(nvmem)) {
+		of_node_put(cell_np);
+		return ERR_CAST(nvmem);
+	}
+
+	cell_entry = nvmem_find_cell_entry_by_node(nvmem, cell_np);
+	of_node_put(cell_np);
+	if (!cell_entry) {
+		__nvmem_device_put(nvmem);
+		return ERR_PTR(-ENOENT);
+	}
+
+	cell = nvmem_create_cell(cell_entry, id);
+	if (IS_ERR(cell))
+		__nvmem_device_put(nvmem);
+
+	return cell;
+}
+EXPORT_SYMBOL_GPL(of_nvmem_cell_get);
+#endif
+
+/**
+ * nvmem_cell_get() - Get nvmem cell of device form a given cell name
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @id: nvmem cell name to get (this corresponds with the name from the
+ *      nvmem-cell-names property for DT systems and with the con_id from
+ *      the lookup entry for non-DT systems).
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer
+ * to a struct nvmem_cell.  The nvmem_cell will be freed by the
+ * nvmem_cell_put().
+ */
+struct nvmem_cell *nvmem_cell_get(struct device *dev, const char *id)
+{
+	struct nvmem_cell *cell;
+
+	if (dev->of_node) { /* try dt first */
+		cell = of_nvmem_cell_get(dev->of_node, id);
+		if (!IS_ERR(cell) || PTR_ERR(cell) == -EPROBE_DEFER)
+			return cell;
+	}
+
+	/* NULL cell id only allowed for device tree; invalid otherwise */
+	if (!id)
+		return ERR_PTR(-EINVAL);
+
+	return nvmem_cell_get_from_lookup(dev, id);
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_get);
+
+static void devm_nvmem_cell_release(struct device *dev, void *res)
+{
+	nvmem_cell_put(*(struct nvmem_cell **)res);
+}
+
+/**
+ * devm_nvmem_cell_get() - Get nvmem cell of device form a given id
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @id: nvmem cell name id to get.
+ *
+ * Return: Will be an ERR_PTR() on error or a valid pointer
+ * to a struct nvmem_cell.  The nvmem_cell will be freed by the
+ * automatically once the device is freed.
+ */
+struct nvmem_cell *devm_nvmem_cell_get(struct device *dev, const char *id)
+{
+	struct nvmem_cell **ptr, *cell;
+
+	ptr = devres_alloc(devm_nvmem_cell_release, sizeof(*ptr), GFP_KERNEL);
+	if (!ptr)
+		return ERR_PTR(-ENOMEM);
+
+	cell = nvmem_cell_get(dev, id);
+	if (!IS_ERR(cell)) {
+		*ptr = cell;
+		devres_add(dev, ptr);
+	} else {
+		devres_free(ptr);
+	}
+
+	return cell;
+}
+EXPORT_SYMBOL_GPL(devm_nvmem_cell_get);
+
+static int devm_nvmem_cell_match(struct device *dev, void *res, void *data)
+{
+	struct nvmem_cell **c = res;
+
+	if (WARN_ON(!c || !*c))
+		return 0;
+
+	return *c == data;
+}
+
+/**
+ * devm_nvmem_cell_put() - Release previously allocated nvmem cell
+ * from devm_nvmem_cell_get.
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell: Previously allocated nvmem cell by devm_nvmem_cell_get().
+ */
+void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell)
+{
+	int ret;
+
+	ret = devres_release(dev, devm_nvmem_cell_release,
+				devm_nvmem_cell_match, cell);
+
+	WARN_ON(ret);
+}
+EXPORT_SYMBOL(devm_nvmem_cell_put);
+
+/**
+ * nvmem_cell_put() - Release previously allocated nvmem cell.
+ *
+ * @cell: Previously allocated nvmem cell by nvmem_cell_get().
+ */
+void nvmem_cell_put(struct nvmem_cell *cell)
+{
+	struct nvmem_device *nvmem = cell->entry->nvmem;
+
+	if (cell->id)
+		kfree_const(cell->id);
+
+	kfree(cell);
+	__nvmem_device_put(nvmem);
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_put);
+
+static void nvmem_shift_read_buffer_in_place(struct nvmem_cell_entry *cell, void *buf)
+{
+	u8 *p, *b;
+	int i, extra, bit_offset = cell->bit_offset;
+
+	p = b = buf;
+	if (bit_offset) {
+		/* First shift */
+		*b++ >>= bit_offset;
+
+		/* setup rest of the bytes if any */
+		for (i = 1; i < cell->bytes; i++) {
+			/* Get bits from next byte and shift them towards msb */
+			*p |= *b << (BITS_PER_BYTE - bit_offset);
+
+			p = b;
+			*b++ >>= bit_offset;
+		}
+	} else {
+		/* point to the msb */
+		p += cell->bytes - 1;
+	}
+
+	/* result fits in less bytes */
+	extra = cell->bytes - DIV_ROUND_UP(cell->nbits, BITS_PER_BYTE);
+	while (--extra >= 0)
+		*p-- = 0;
+
+	/* clear msb bits if any leftover in the last byte */
+	if (cell->nbits % BITS_PER_BYTE)
+		*p &= GENMASK((cell->nbits % BITS_PER_BYTE) - 1, 0);
+}
+
+static int __nvmem_cell_read(struct nvmem_device *nvmem,
+		      struct nvmem_cell_entry *cell,
+		      void *buf, size_t *len, const char *id)
+{
+	int rc;
+
+	rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->bytes);
+
+	if (rc)
+		return rc;
+
+	/* shift bits in-place */
+	if (cell->bit_offset || cell->nbits)
+		nvmem_shift_read_buffer_in_place(cell, buf);
+
+	if (nvmem->cell_post_process) {
+		rc = nvmem->cell_post_process(nvmem->priv, id,
+					      cell->offset, buf, cell->bytes);
+		if (rc)
+			return rc;
+	}
+
+	if (len)
+		*len = cell->bytes;
+
+	return 0;
+}
+
+/**
+ * nvmem_cell_read() - Read a given nvmem cell
+ *
+ * @cell: nvmem cell to be read.
+ * @len: pointer to length of cell which will be populated on successful read;
+ *	 can be NULL.
+ *
+ * Return: ERR_PTR() on error or a valid pointer to a buffer on success. The
+ * buffer should be freed by the consumer with a kfree().
+ */
+void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
+{
+	struct nvmem_device *nvmem = cell->entry->nvmem;
+	u8 *buf;
+	int rc;
+
+	if (!nvmem)
+		return ERR_PTR(-EINVAL);
+
+	buf = kzalloc(cell->entry->bytes, GFP_KERNEL);
+	if (!buf)
+		return ERR_PTR(-ENOMEM);
+
+	rc = __nvmem_cell_read(nvmem, cell->entry, buf, len, cell->id);
+	if (rc) {
+		kfree(buf);
+		return ERR_PTR(rc);
+	}
+
+	return buf;
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read);
+
+static void *nvmem_cell_prepare_write_buffer(struct nvmem_cell_entry *cell,
+					     u8 *_buf, int len)
+{
+	struct nvmem_device *nvmem = cell->nvmem;
+	int i, rc, nbits, bit_offset = cell->bit_offset;
+	u8 v, *p, *buf, *b, pbyte, pbits;
+
+	nbits = cell->nbits;
+	buf = kzalloc(cell->bytes, GFP_KERNEL);
+	if (!buf)
+		return ERR_PTR(-ENOMEM);
+
+	memcpy(buf, _buf, len);
+	p = b = buf;
+
+	if (bit_offset) {
+		pbyte = *b;
+		*b <<= bit_offset;
+
+		/* setup the first byte with lsb bits from nvmem */
+		rc = nvmem_reg_read(nvmem, cell->offset, &v, 1);
+		if (rc)
+			goto err;
+		*b++ |= GENMASK(bit_offset - 1, 0) & v;
+
+		/* setup rest of the byte if any */
+		for (i = 1; i < cell->bytes; i++) {
+			/* Get last byte bits and shift them towards lsb */
+			pbits = pbyte >> (BITS_PER_BYTE - 1 - bit_offset);
+			pbyte = *b;
+			p = b;
+			*b <<= bit_offset;
+			*b++ |= pbits;
+		}
+	}
+
+	/* if it's not end on byte boundary */
+	if ((nbits + bit_offset) % BITS_PER_BYTE) {
+		/* setup the last byte with msb bits from nvmem */
+		rc = nvmem_reg_read(nvmem,
+				    cell->offset + cell->bytes - 1, &v, 1);
+		if (rc)
+			goto err;
+		*p |= GENMASK(7, (nbits + bit_offset) % BITS_PER_BYTE) & v;
+
+	}
+
+	return buf;
+err:
+	kfree(buf);
+	return ERR_PTR(rc);
+}
+
+static int __nvmem_cell_entry_write(struct nvmem_cell_entry *cell, void *buf, size_t len)
+{
+	struct nvmem_device *nvmem = cell->nvmem;
+	int rc;
+
+	if (!nvmem || nvmem->read_only ||
+	    (cell->bit_offset == 0 && len != cell->bytes))
+		return -EINVAL;
+
+	if (cell->bit_offset || cell->nbits) {
+		buf = nvmem_cell_prepare_write_buffer(cell, buf, len);
+		if (IS_ERR(buf))
+			return PTR_ERR(buf);
+	}
+
+	rc = nvmem_reg_write(nvmem, cell->offset, buf, cell->bytes);
+
+	/* free the tmp buffer */
+	if (cell->bit_offset || cell->nbits)
+		kfree(buf);
+
+	if (rc)
+		return rc;
+
+	return len;
+}
+
+/**
+ * nvmem_cell_write() - Write to a given nvmem cell
+ *
+ * @cell: nvmem cell to be written.
+ * @buf: Buffer to be written.
+ * @len: length of buffer to be written to nvmem cell.
+ *
+ * Return: length of bytes written or negative on failure.
+ */
+int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len)
+{
+	return __nvmem_cell_entry_write(cell->entry, buf, len);
+}
+
+EXPORT_SYMBOL_GPL(nvmem_cell_write);
+
+static int nvmem_cell_read_common(struct device *dev, const char *cell_id,
+				  void *val, size_t count)
+{
+	struct nvmem_cell *cell;
+	void *buf;
+	size_t len;
+
+	cell = nvmem_cell_get(dev, cell_id);
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	buf = nvmem_cell_read(cell, &len);
+	if (IS_ERR(buf)) {
+		nvmem_cell_put(cell);
+		return PTR_ERR(buf);
+	}
+	if (len != count) {
+		kfree(buf);
+		nvmem_cell_put(cell);
+		return -EINVAL;
+	}
+	memcpy(val, buf, count);
+	kfree(buf);
+	nvmem_cell_put(cell);
+
+	return 0;
+}
+
+/**
+ * nvmem_cell_read_u8() - Read a cell value as a u8
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u8(struct device *dev, const char *cell_id, u8 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u8);
+
+/**
+ * nvmem_cell_read_u16() - Read a cell value as a u16
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u16(struct device *dev, const char *cell_id, u16 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u16);
+
+/**
+ * nvmem_cell_read_u32() - Read a cell value as a u32
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u32(struct device *dev, const char *cell_id, u32 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u32);
+
+/**
+ * nvmem_cell_read_u64() - Read a cell value as a u64
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u64(struct device *dev, const char *cell_id, u64 *val)
+{
+	return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u64);
+
+static const void *nvmem_cell_read_variable_common(struct device *dev,
+						   const char *cell_id,
+						   size_t max_len, size_t *len)
+{
+	struct nvmem_cell *cell;
+	int nbits;
+	void *buf;
+
+	cell = nvmem_cell_get(dev, cell_id);
+	if (IS_ERR(cell))
+		return cell;
+
+	nbits = cell->entry->nbits;
+	buf = nvmem_cell_read(cell, len);
+	nvmem_cell_put(cell);
+	if (IS_ERR(buf))
+		return buf;
+
+	/*
+	 * If nbits is set then nvmem_cell_read() can significantly exaggerate
+	 * the length of the real data. Throw away the extra junk.
+	 */
+	if (nbits)
+		*len = DIV_ROUND_UP(nbits, 8);
+
+	if (*len > max_len) {
+		kfree(buf);
+		return ERR_PTR(-ERANGE);
+	}
+
+	return buf;
+}
+
+/**
+ * nvmem_cell_read_variable_le_u32() - Read up to 32-bits of data as a little endian number.
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_variable_le_u32(struct device *dev, const char *cell_id,
+				    u32 *val)
+{
+	size_t len;
+	const u8 *buf;
+	int i;
+
+	buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	/* Copy w/ implicit endian conversion */
+	*val = 0;
+	for (i = 0; i < len; i++)
+		*val |= buf[i] << (8 * i);
+
+	kfree(buf);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_variable_le_u32);
+
+/**
+ * nvmem_cell_read_variable_le_u64() - Read up to 64-bits of data as a little endian number.
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_variable_le_u64(struct device *dev, const char *cell_id,
+				    u64 *val)
+{
+	size_t len;
+	const u8 *buf;
+	int i;
+
+	buf = nvmem_cell_read_variable_common(dev, cell_id, sizeof(*val), &len);
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	/* Copy w/ implicit endian conversion */
+	*val = 0;
+	for (i = 0; i < len; i++)
+		*val |= (uint64_t)buf[i] << (8 * i);
+
+	kfree(buf);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_variable_le_u64);
+
+/**
+ * nvmem_device_cell_read() - Read a given nvmem device and cell
+ *
+ * @nvmem: nvmem device to read from.
+ * @info: nvmem cell info to be read.
+ * @buf: buffer pointer which will be populated on successful read.
+ *
+ * Return: length of successful bytes read on success and negative
+ * error code on error.
+ */
+ssize_t nvmem_device_cell_read(struct nvmem_device *nvmem,
+			   struct nvmem_cell_info *info, void *buf)
+{
+	struct nvmem_cell_entry cell;
+	int rc;
+	ssize_t len;
+
+	if (!nvmem)
+		return -EINVAL;
+
+	rc = nvmem_cell_info_to_nvmem_cell_entry_nodup(nvmem, info, &cell);
+	if (rc)
+		return rc;
+
+	rc = __nvmem_cell_read(nvmem, &cell, buf, &len, NULL);
+	if (rc)
+		return rc;
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(nvmem_device_cell_read);
+
+/**
+ * nvmem_device_cell_write() - Write cell to a given nvmem device
+ *
+ * @nvmem: nvmem device to be written to.
+ * @info: nvmem cell info to be written.
+ * @buf: buffer to be written to cell.
+ *
+ * Return: length of bytes written or negative error code on failure.
+ */
+int nvmem_device_cell_write(struct nvmem_device *nvmem,
+			    struct nvmem_cell_info *info, void *buf)
+{
+	struct nvmem_cell_entry cell;
+	int rc;
+
+	if (!nvmem)
+		return -EINVAL;
+
+	rc = nvmem_cell_info_to_nvmem_cell_entry_nodup(nvmem, info, &cell);
+	if (rc)
+		return rc;
+
+	return __nvmem_cell_entry_write(&cell, buf, cell.bytes);
+}
+EXPORT_SYMBOL_GPL(nvmem_device_cell_write);
+
+/**
+ * nvmem_device_read() - Read from a given nvmem device
+ *
+ * @nvmem: nvmem device to read from.
+ * @offset: offset in nvmem device.
+ * @bytes: number of bytes to read.
+ * @buf: buffer pointer which will be populated on successful read.
+ *
+ * Return: length of successful bytes read on success and negative
+ * error code on error.
+ */
+int nvmem_device_read(struct nvmem_device *nvmem,
+		      unsigned int offset,
+		      size_t bytes, void *buf)
+{
+	int rc;
+
+	if (!nvmem)
+		return -EINVAL;
+
+	rc = nvmem_reg_read(nvmem, offset, buf, bytes);
+
+	if (rc)
+		return rc;
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(nvmem_device_read);
+
+/**
+ * nvmem_device_write() - Write cell to a given nvmem device
+ *
+ * @nvmem: nvmem device to be written to.
+ * @offset: offset in nvmem device.
+ * @bytes: number of bytes to write.
+ * @buf: buffer to be written.
+ *
+ * Return: length of bytes written or negative error code on failure.
+ */
+int nvmem_device_write(struct nvmem_device *nvmem,
+		       unsigned int offset,
+		       size_t bytes, void *buf)
+{
+	int rc;
+
+	if (!nvmem)
+		return -EINVAL;
+
+	rc = nvmem_reg_write(nvmem, offset, buf, bytes);
+
+	if (rc)
+		return rc;
+
+
+	return bytes;
+}
+EXPORT_SYMBOL_GPL(nvmem_device_write);
+
+/**
+ * nvmem_add_cell_table() - register a table of cell info entries
+ *
+ * @table: table of cell info entries
+ */
+void nvmem_add_cell_table(struct nvmem_cell_table *table)
+{
+	mutex_lock(&nvmem_cell_mutex);
+	list_add_tail(&table->node, &nvmem_cell_tables);
+	mutex_unlock(&nvmem_cell_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_add_cell_table);
+
+/**
+ * nvmem_del_cell_table() - remove a previously registered cell info table
+ *
+ * @table: table of cell info entries
+ */
+void nvmem_del_cell_table(struct nvmem_cell_table *table)
+{
+	mutex_lock(&nvmem_cell_mutex);
+	list_del(&table->node);
+	mutex_unlock(&nvmem_cell_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_del_cell_table);
+
+/**
+ * nvmem_add_cell_lookups() - register a list of cell lookup entries
+ *
+ * @entries: array of cell lookup entries
+ * @nentries: number of cell lookup entries in the array
+ */
+void nvmem_add_cell_lookups(struct nvmem_cell_lookup *entries, size_t nentries)
+{
+	int i;
+
+	mutex_lock(&nvmem_lookup_mutex);
+	for (i = 0; i < nentries; i++)
+		list_add_tail(&entries[i].node, &nvmem_lookup_list);
+	mutex_unlock(&nvmem_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_add_cell_lookups);
+
+/**
+ * nvmem_del_cell_lookups() - remove a list of previously added cell lookup
+ *                            entries
+ *
+ * @entries: array of cell lookup entries
+ * @nentries: number of cell lookup entries in the array
+ */
+void nvmem_del_cell_lookups(struct nvmem_cell_lookup *entries, size_t nentries)
+{
+	int i;
+
+	mutex_lock(&nvmem_lookup_mutex);
+	for (i = 0; i < nentries; i++)
+		list_del(&entries[i].node);
+	mutex_unlock(&nvmem_lookup_mutex);
+}
+EXPORT_SYMBOL_GPL(nvmem_del_cell_lookups);
+
+/**
+ * nvmem_dev_name() - Get the name of a given nvmem device.
+ *
+ * @nvmem: nvmem device.
+ *
+ * Return: name of the nvmem device.
+ */
+const char *nvmem_dev_name(struct nvmem_device *nvmem)
+{
+	return dev_name(&nvmem->dev);
+}
+EXPORT_SYMBOL_GPL(nvmem_dev_name);
+
+static int __init nvmem_init(void)
+{
+	return bus_register(&nvmem_bus_type);
+}
+
+static void __exit nvmem_exit(void)
+{
+	bus_unregister(&nvmem_bus_type);
+}
+
+subsys_initcall(nvmem_init);
+module_exit(nvmem_exit);
+
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com");
+MODULE_DESCRIPTION("nvmem Driver Core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/imx-iim.c b/drivers/nvmem/imx-iim.c
new file mode 100644
index 000000000..c86339a7f
--- /dev/null
+++ b/drivers/nvmem/imx-iim.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * i.MX IIM driver
+ *
+ * Copyright (c) 2017 Pengutronix, Michael Grzeschik <m.grzeschik@pengutronix.de>
+ *
+ * Based on the barebox iim driver,
+ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>,
+ *	Orex Computed Radiography
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#define IIM_BANK_BASE(n)	(0x800 + 0x400 * (n))
+
+struct imx_iim_drvdata {
+	unsigned int nregs;
+};
+
+struct iim_priv {
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static int imx_iim_read(void *context, unsigned int offset,
+			  void *buf, size_t bytes)
+{
+	struct iim_priv *iim = context;
+	int i, ret;
+	u8 *buf8 = buf;
+
+	ret = clk_prepare_enable(iim->clk);
+	if (ret)
+		return ret;
+
+	for (i = offset; i < offset + bytes; i++) {
+		int bank = i >> 5;
+		int reg = i & 0x1f;
+
+		*buf8++ = readl(iim->base + IIM_BANK_BASE(bank) + reg * 4);
+	}
+
+	clk_disable_unprepare(iim->clk);
+
+	return 0;
+}
+
+static struct imx_iim_drvdata imx27_drvdata = {
+	.nregs = 2 * 32,
+};
+
+static struct imx_iim_drvdata imx25_imx31_imx35_drvdata = {
+	.nregs = 3 * 32,
+};
+
+static struct imx_iim_drvdata imx51_drvdata = {
+	.nregs = 4 * 32,
+};
+
+static struct imx_iim_drvdata imx53_drvdata = {
+	.nregs = 4 * 32 + 16,
+};
+
+static const struct of_device_id imx_iim_dt_ids[] = {
+	{
+		.compatible = "fsl,imx25-iim",
+		.data = &imx25_imx31_imx35_drvdata,
+	}, {
+		.compatible = "fsl,imx27-iim",
+		.data = &imx27_drvdata,
+	}, {
+		.compatible = "fsl,imx31-iim",
+		.data = &imx25_imx31_imx35_drvdata,
+	}, {
+		.compatible = "fsl,imx35-iim",
+		.data = &imx25_imx31_imx35_drvdata,
+	}, {
+		.compatible = "fsl,imx51-iim",
+		.data = &imx51_drvdata,
+	}, {
+		.compatible = "fsl,imx53-iim",
+		.data = &imx53_drvdata,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, imx_iim_dt_ids);
+
+static int imx_iim_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iim_priv *iim;
+	struct nvmem_device *nvmem;
+	struct nvmem_config cfg = {};
+	const struct imx_iim_drvdata *drvdata = NULL;
+
+	iim = devm_kzalloc(dev, sizeof(*iim), GFP_KERNEL);
+	if (!iim)
+		return -ENOMEM;
+
+	iim->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(iim->base))
+		return PTR_ERR(iim->base);
+
+	drvdata = of_device_get_match_data(&pdev->dev);
+
+	iim->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(iim->clk))
+		return PTR_ERR(iim->clk);
+
+	cfg.name = "imx-iim",
+	cfg.read_only = true,
+	cfg.word_size = 1,
+	cfg.stride = 1,
+	cfg.reg_read = imx_iim_read,
+	cfg.dev = dev;
+	cfg.size = drvdata->nregs;
+	cfg.priv = iim;
+
+	nvmem = devm_nvmem_register(dev, &cfg);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver imx_iim_driver = {
+	.probe	= imx_iim_probe,
+	.driver = {
+		.name	= "imx-iim",
+		.of_match_table = imx_iim_dt_ids,
+	},
+};
+module_platform_driver(imx_iim_driver);
+
+MODULE_AUTHOR("Michael Grzeschik <m.grzeschik@pengutronix.de>");
+MODULE_DESCRIPTION("i.MX IIM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/imx-ocotp-scu.c b/drivers/nvmem/imx-ocotp-scu.c
new file mode 100644
index 000000000..399e1eb8b
--- /dev/null
+++ b/drivers/nvmem/imx-ocotp-scu.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * i.MX8 OCOTP fusebox driver
+ *
+ * Copyright 2019 NXP
+ *
+ * Peng Fan <peng.fan@nxp.com>
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define IMX_SIP_OTP_WRITE		0xc200000B
+
+enum ocotp_devtype {
+	IMX8QXP,
+	IMX8QM,
+};
+
+#define ECC_REGION	BIT(0)
+#define HOLE_REGION	BIT(1)
+
+struct ocotp_region {
+	u32 start;
+	u32 end;
+	u32 flag;
+};
+
+struct ocotp_devtype_data {
+	int devtype;
+	int nregs;
+	u32 num_region;
+	struct ocotp_region region[];
+};
+
+struct ocotp_priv {
+	struct device *dev;
+	const struct ocotp_devtype_data *data;
+	struct imx_sc_ipc *nvmem_ipc;
+};
+
+struct imx_sc_msg_misc_fuse_read {
+	struct imx_sc_rpc_msg hdr;
+	u32 word;
+} __packed;
+
+static DEFINE_MUTEX(scu_ocotp_mutex);
+
+static struct ocotp_devtype_data imx8qxp_data = {
+	.devtype = IMX8QXP,
+	.nregs = 800,
+	.num_region = 3,
+	.region = {
+		{0x10, 0x10f, ECC_REGION},
+		{0x110, 0x21F, HOLE_REGION},
+		{0x220, 0x31F, ECC_REGION},
+	},
+};
+
+static struct ocotp_devtype_data imx8qm_data = {
+	.devtype = IMX8QM,
+	.nregs = 800,
+	.num_region = 2,
+	.region = {
+		{0x10, 0x10f, ECC_REGION},
+		{0x1a0, 0x1ff, ECC_REGION},
+	},
+};
+
+static bool in_hole(void *context, u32 index)
+{
+	struct ocotp_priv *priv = context;
+	const struct ocotp_devtype_data *data = priv->data;
+	int i;
+
+	for (i = 0; i < data->num_region; i++) {
+		if (data->region[i].flag & HOLE_REGION) {
+			if ((index >= data->region[i].start) &&
+			    (index <= data->region[i].end))
+				return true;
+		}
+	}
+
+	return false;
+}
+
+static bool in_ecc(void *context, u32 index)
+{
+	struct ocotp_priv *priv = context;
+	const struct ocotp_devtype_data *data = priv->data;
+	int i;
+
+	for (i = 0; i < data->num_region; i++) {
+		if (data->region[i].flag & ECC_REGION) {
+			if ((index >= data->region[i].start) &&
+			    (index <= data->region[i].end))
+				return true;
+		}
+	}
+
+	return false;
+}
+
+static int imx_sc_misc_otp_fuse_read(struct imx_sc_ipc *ipc, u32 word,
+				     u32 *val)
+{
+	struct imx_sc_msg_misc_fuse_read msg;
+	struct imx_sc_rpc_msg *hdr = &msg.hdr;
+	int ret;
+
+	hdr->ver = IMX_SC_RPC_VERSION;
+	hdr->svc = IMX_SC_RPC_SVC_MISC;
+	hdr->func = IMX_SC_MISC_FUNC_OTP_FUSE_READ;
+	hdr->size = 2;
+
+	msg.word = word;
+
+	ret = imx_scu_call_rpc(ipc, &msg, true);
+	if (ret)
+		return ret;
+
+	*val = msg.word;
+
+	return 0;
+}
+
+static int imx_scu_ocotp_read(void *context, unsigned int offset,
+			      void *val, size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+	u32 count, index, num_bytes;
+	u32 *buf;
+	void *p;
+	int i, ret;
+
+	index = offset;
+	num_bytes = round_up(bytes, 4);
+	count = num_bytes >> 2;
+
+	if (count > (priv->data->nregs - index))
+		count = priv->data->nregs - index;
+
+	p = kzalloc(num_bytes, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	mutex_lock(&scu_ocotp_mutex);
+
+	buf = p;
+
+	for (i = index; i < (index + count); i++) {
+		if (in_hole(context, i)) {
+			*buf++ = 0;
+			continue;
+		}
+
+		ret = imx_sc_misc_otp_fuse_read(priv->nvmem_ipc, i, buf);
+		if (ret) {
+			mutex_unlock(&scu_ocotp_mutex);
+			kfree(p);
+			return ret;
+		}
+		buf++;
+	}
+
+	memcpy(val, (u8 *)p, bytes);
+
+	mutex_unlock(&scu_ocotp_mutex);
+
+	kfree(p);
+
+	return 0;
+}
+
+static int imx_scu_ocotp_write(void *context, unsigned int offset,
+			       void *val, size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+	struct arm_smccc_res res;
+	u32 *buf = val;
+	u32 tmp;
+	u32 index;
+	int ret;
+
+	/* allow only writing one complete OTP word at a time */
+	if (bytes != 4)
+		return -EINVAL;
+
+	index = offset;
+
+	if (in_hole(context, index))
+		return -EINVAL;
+
+	if (in_ecc(context, index)) {
+		pr_warn("ECC region, only program once\n");
+		mutex_lock(&scu_ocotp_mutex);
+		ret = imx_sc_misc_otp_fuse_read(priv->nvmem_ipc, index, &tmp);
+		mutex_unlock(&scu_ocotp_mutex);
+		if (ret)
+			return ret;
+		if (tmp) {
+			pr_warn("ECC region, already has value: %x\n", tmp);
+			return -EIO;
+		}
+	}
+
+	mutex_lock(&scu_ocotp_mutex);
+
+	arm_smccc_smc(IMX_SIP_OTP_WRITE, index, *buf, 0, 0, 0, 0, 0, &res);
+
+	mutex_unlock(&scu_ocotp_mutex);
+
+	return res.a0;
+}
+
+static struct nvmem_config imx_scu_ocotp_nvmem_config = {
+	.name = "imx-scu-ocotp",
+	.read_only = false,
+	.word_size = 4,
+	.stride = 1,
+	.owner = THIS_MODULE,
+	.reg_read = imx_scu_ocotp_read,
+	.reg_write = imx_scu_ocotp_write,
+};
+
+static const struct of_device_id imx_scu_ocotp_dt_ids[] = {
+	{ .compatible = "fsl,imx8qxp-scu-ocotp", (void *)&imx8qxp_data },
+	{ .compatible = "fsl,imx8qm-scu-ocotp", (void *)&imx8qm_data },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx_scu_ocotp_dt_ids);
+
+static int imx_scu_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ocotp_priv *priv;
+	struct nvmem_device *nvmem;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = imx_scu_get_handle(&priv->nvmem_ipc);
+	if (ret)
+		return ret;
+
+	priv->data = of_device_get_match_data(dev);
+	priv->dev = dev;
+	imx_scu_ocotp_nvmem_config.size = 4 * priv->data->nregs;
+	imx_scu_ocotp_nvmem_config.dev = dev;
+	imx_scu_ocotp_nvmem_config.priv = priv;
+	nvmem = devm_nvmem_register(dev, &imx_scu_ocotp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver imx_scu_ocotp_driver = {
+	.probe	= imx_scu_ocotp_probe,
+	.driver = {
+		.name	= "imx_scu_ocotp",
+		.of_match_table = imx_scu_ocotp_dt_ids,
+	},
+};
+module_platform_driver(imx_scu_ocotp_driver);
+
+MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
+MODULE_DESCRIPTION("i.MX8 SCU OCOTP fuse box driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
new file mode 100644
index 000000000..9590a864e
--- /dev/null
+++ b/drivers/nvmem/imx-ocotp.c
@@ -0,0 +1,644 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * i.MX6 OCOTP fusebox driver
+ *
+ * Copyright (c) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * Copyright 2019 NXP
+ *
+ * Based on the barebox ocotp driver,
+ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>,
+ *	Orex Computed Radiography
+ *
+ * Write support based on the fsl_otp driver,
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#define IMX_OCOTP_OFFSET_B0W0		0x400 /* Offset from base address of the
+					       * OTP Bank0 Word0
+					       */
+#define IMX_OCOTP_OFFSET_PER_WORD	0x10  /* Offset between the start addr
+					       * of two consecutive OTP words.
+					       */
+
+#define IMX_OCOTP_ADDR_CTRL		0x0000
+#define IMX_OCOTP_ADDR_CTRL_SET		0x0004
+#define IMX_OCOTP_ADDR_CTRL_CLR		0x0008
+#define IMX_OCOTP_ADDR_TIMING		0x0010
+#define IMX_OCOTP_ADDR_DATA0		0x0020
+#define IMX_OCOTP_ADDR_DATA1		0x0030
+#define IMX_OCOTP_ADDR_DATA2		0x0040
+#define IMX_OCOTP_ADDR_DATA3		0x0050
+
+#define IMX_OCOTP_BM_CTRL_ADDR		0x000000FF
+#define IMX_OCOTP_BM_CTRL_BUSY		0x00000100
+#define IMX_OCOTP_BM_CTRL_ERROR		0x00000200
+#define IMX_OCOTP_BM_CTRL_REL_SHADOWS	0x00000400
+
+#define IMX_OCOTP_BM_CTRL_ADDR_8MP		0x000001FF
+#define IMX_OCOTP_BM_CTRL_BUSY_8MP		0x00000200
+#define IMX_OCOTP_BM_CTRL_ERROR_8MP		0x00000400
+#define IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP	0x00000800
+
+#define IMX_OCOTP_BM_CTRL_DEFAULT				\
+	{							\
+		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR,		\
+		.bm_busy = IMX_OCOTP_BM_CTRL_BUSY,		\
+		.bm_error = IMX_OCOTP_BM_CTRL_ERROR,		\
+		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS,\
+	}
+
+#define IMX_OCOTP_BM_CTRL_8MP					\
+	{							\
+		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR_8MP,		\
+		.bm_busy = IMX_OCOTP_BM_CTRL_BUSY_8MP,		\
+		.bm_error = IMX_OCOTP_BM_CTRL_ERROR_8MP,	\
+		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP,\
+	}
+
+#define TIMING_STROBE_PROG_US		10	/* Min time to blow a fuse */
+#define TIMING_STROBE_READ_NS		37	/* Min time before read */
+#define TIMING_RELAX_NS			17
+#define DEF_FSOURCE			1001	/* > 1000 ns */
+#define DEF_STROBE_PROG			10000	/* IPG clocks */
+#define IMX_OCOTP_WR_UNLOCK		0x3E770000
+#define IMX_OCOTP_READ_LOCKED_VAL	0xBADABADA
+
+static DEFINE_MUTEX(ocotp_mutex);
+
+struct ocotp_priv {
+	struct device *dev;
+	struct clk *clk;
+	void __iomem *base;
+	const struct ocotp_params *params;
+	struct nvmem_config *config;
+};
+
+struct ocotp_ctrl_reg {
+	u32 bm_addr;
+	u32 bm_busy;
+	u32 bm_error;
+	u32 bm_rel_shadows;
+};
+
+struct ocotp_params {
+	unsigned int nregs;
+	unsigned int bank_address_words;
+	void (*set_timing)(struct ocotp_priv *priv);
+	struct ocotp_ctrl_reg ctrl;
+	bool reverse_mac_address;
+};
+
+static int imx_ocotp_wait_for_busy(struct ocotp_priv *priv, u32 flags)
+{
+	int count;
+	u32 c, mask;
+	u32 bm_ctrl_busy, bm_ctrl_error;
+	void __iomem *base = priv->base;
+
+	bm_ctrl_busy = priv->params->ctrl.bm_busy;
+	bm_ctrl_error = priv->params->ctrl.bm_error;
+
+	mask = bm_ctrl_busy | bm_ctrl_error | flags;
+
+	for (count = 10000; count >= 0; count--) {
+		c = readl(base + IMX_OCOTP_ADDR_CTRL);
+		if (!(c & mask))
+			break;
+		cpu_relax();
+	}
+
+	if (count < 0) {
+		/* HW_OCOTP_CTRL[ERROR] will be set under the following
+		 * conditions:
+		 * - A write is performed to a shadow register during a shadow
+		 *   reload (essentially, while HW_OCOTP_CTRL[RELOAD_SHADOWS] is
+		 *   set. In addition, the contents of the shadow register shall
+		 *   not be updated.
+		 * - A write is performed to a shadow register which has been
+		 *   locked.
+		 * - A read is performed to from a shadow register which has
+		 *   been read locked.
+		 * - A program is performed to a fuse word which has been locked
+		 * - A read is performed to from a fuse word which has been read
+		 *   locked.
+		 */
+		if (c & bm_ctrl_error)
+			return -EPERM;
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void imx_ocotp_clr_err_if_set(struct ocotp_priv *priv)
+{
+	u32 c, bm_ctrl_error;
+	void __iomem *base = priv->base;
+
+	bm_ctrl_error = priv->params->ctrl.bm_error;
+
+	c = readl(base + IMX_OCOTP_ADDR_CTRL);
+	if (!(c & bm_ctrl_error))
+		return;
+
+	writel(bm_ctrl_error, base + IMX_OCOTP_ADDR_CTRL_CLR);
+}
+
+static int imx_ocotp_read(void *context, unsigned int offset,
+			  void *val, size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+	unsigned int count;
+	u8 *buf, *p;
+	int i, ret;
+	u32 index, num_bytes;
+
+	index = offset >> 2;
+	num_bytes = round_up((offset % 4) + bytes, 4);
+	count = num_bytes >> 2;
+
+	if (count > (priv->params->nregs - index))
+		count = priv->params->nregs - index;
+
+	p = kzalloc(num_bytes, GFP_KERNEL);
+	if (!p)
+		return -ENOMEM;
+
+	mutex_lock(&ocotp_mutex);
+
+	buf = p;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret < 0) {
+		mutex_unlock(&ocotp_mutex);
+		dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+		kfree(p);
+		return ret;
+	}
+
+	ret = imx_ocotp_wait_for_busy(priv, 0);
+	if (ret < 0) {
+		dev_err(priv->dev, "timeout during read setup\n");
+		goto read_end;
+	}
+
+	for (i = index; i < (index + count); i++) {
+		*(u32 *)buf = readl(priv->base + IMX_OCOTP_OFFSET_B0W0 +
+			       i * IMX_OCOTP_OFFSET_PER_WORD);
+
+		/* 47.3.1.2
+		 * For "read locked" registers 0xBADABADA will be returned and
+		 * HW_OCOTP_CTRL[ERROR] will be set. It must be cleared by
+		 * software before any new write, read or reload access can be
+		 * issued
+		 */
+		if (*((u32 *)buf) == IMX_OCOTP_READ_LOCKED_VAL)
+			imx_ocotp_clr_err_if_set(priv);
+
+		buf += 4;
+	}
+
+	index = offset % 4;
+	memcpy(val, &p[index], bytes);
+
+read_end:
+	clk_disable_unprepare(priv->clk);
+	mutex_unlock(&ocotp_mutex);
+
+	kfree(p);
+
+	return ret;
+}
+
+static int imx_ocotp_cell_pp(void *context, const char *id, unsigned int offset,
+			     void *data, size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+
+	/* Deal with some post processing of nvmem cell data */
+	if (id && !strcmp(id, "mac-address")) {
+		if (priv->params->reverse_mac_address) {
+			u8 *buf = data;
+			int i;
+
+			for (i = 0; i < bytes/2; i++)
+				swap(buf[i], buf[bytes - i - 1]);
+		}
+	}
+
+	return 0;
+}
+
+static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
+{
+	unsigned long clk_rate;
+	unsigned long strobe_read, relax, strobe_prog;
+	u32 timing;
+
+	/* 47.3.1.3.1
+	 * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
+	 * fields with timing values to match the current frequency of the
+	 * ipg_clk. OTP writes will work at maximum bus frequencies as long
+	 * as the HW_OCOTP_TIMING parameters are set correctly.
+	 *
+	 * Note: there are minimum timings required to ensure an OTP fuse burns
+	 * correctly that are independent of the ipg_clk. Those values are not
+	 * formally documented anywhere however, working from the minimum
+	 * timings given in u-boot we can say:
+	 *
+	 * - Minimum STROBE_PROG time is 10 microseconds. Intuitively 10
+	 *   microseconds feels about right as representative of a minimum time
+	 *   to physically burn out a fuse.
+	 *
+	 * - Minimum STROBE_READ i.e. the time to wait post OTP fuse burn before
+	 *   performing another read is 37 nanoseconds
+	 *
+	 * - Minimum RELAX timing is 17 nanoseconds. This final RELAX minimum
+	 *   timing is not entirely clear the documentation says "This
+	 *   count value specifies the time to add to all default timing
+	 *   parameters other than the Tpgm and Trd. It is given in number
+	 *   of ipg_clk periods." where Tpgm and Trd refer to STROBE_PROG
+	 *   and STROBE_READ respectively. What the other timing parameters
+	 *   are though, is not specified. Experience shows a zero RELAX
+	 *   value will mess up a re-load of the shadow registers post OTP
+	 *   burn.
+	 */
+	clk_rate = clk_get_rate(priv->clk);
+
+	relax = DIV_ROUND_UP(clk_rate * TIMING_RELAX_NS, 1000000000) - 1;
+	strobe_read = DIV_ROUND_UP(clk_rate * TIMING_STROBE_READ_NS,
+				   1000000000);
+	strobe_read += 2 * (relax + 1) - 1;
+	strobe_prog = DIV_ROUND_CLOSEST(clk_rate * TIMING_STROBE_PROG_US,
+					1000000);
+	strobe_prog += 2 * (relax + 1) - 1;
+
+	timing = readl(priv->base + IMX_OCOTP_ADDR_TIMING) & 0x0FC00000;
+	timing |= strobe_prog & 0x00000FFF;
+	timing |= (relax       << 12) & 0x0000F000;
+	timing |= (strobe_read << 16) & 0x003F0000;
+
+	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
+{
+	unsigned long clk_rate;
+	u64 fsource, strobe_prog;
+	u32 timing;
+
+	/* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1
+	 * 6.4.3.3
+	 */
+	clk_rate = clk_get_rate(priv->clk);
+	fsource = DIV_ROUND_UP_ULL((u64)clk_rate * DEF_FSOURCE,
+				   NSEC_PER_SEC) + 1;
+	strobe_prog = DIV_ROUND_CLOSEST_ULL((u64)clk_rate * DEF_STROBE_PROG,
+					    NSEC_PER_SEC) + 1;
+
+	timing = strobe_prog & 0x00000FFF;
+	timing |= (fsource << 12) & 0x000FF000;
+
+	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static int imx_ocotp_write(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+	u32 *buf = val;
+	int ret;
+
+	u32 ctrl;
+	u8 waddr;
+	u8 word = 0;
+
+	/* allow only writing one complete OTP word at a time */
+	if ((bytes != priv->config->word_size) ||
+	    (offset % priv->config->word_size))
+		return -EINVAL;
+
+	mutex_lock(&ocotp_mutex);
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret < 0) {
+		mutex_unlock(&ocotp_mutex);
+		dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+		return ret;
+	}
+
+	/* Setup the write timing values */
+	priv->params->set_timing(priv);
+
+	/* 47.3.1.3.2
+	 * Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
+	 * Overlapped accesses are not supported by the controller. Any pending
+	 * write or reload must be completed before a write access can be
+	 * requested.
+	 */
+	ret = imx_ocotp_wait_for_busy(priv, 0);
+	if (ret < 0) {
+		dev_err(priv->dev, "timeout during timing setup\n");
+		goto write_end;
+	}
+
+	/* 47.3.1.3.3
+	 * Write the requested address to HW_OCOTP_CTRL[ADDR] and program the
+	 * unlock code into HW_OCOTP_CTRL[WR_UNLOCK]. This must be programmed
+	 * for each write access. The lock code is documented in the register
+	 * description. Both the unlock code and address can be written in the
+	 * same operation.
+	 */
+	if (priv->params->bank_address_words != 0) {
+		/*
+		 * In banked/i.MX7 mode the OTP register bank goes into waddr
+		 * see i.MX 7Solo Applications Processor Reference Manual, Rev.
+		 * 0.1 section 6.4.3.1
+		 */
+		offset = offset / priv->config->word_size;
+		waddr = offset / priv->params->bank_address_words;
+		word  = offset & (priv->params->bank_address_words - 1);
+	} else {
+		/*
+		 * Non-banked i.MX6 mode.
+		 * OTP write/read address specifies one of 128 word address
+		 * locations
+		 */
+		waddr = offset / 4;
+	}
+
+	ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL);
+	ctrl &= ~priv->params->ctrl.bm_addr;
+	ctrl |= waddr & priv->params->ctrl.bm_addr;
+	ctrl |= IMX_OCOTP_WR_UNLOCK;
+
+	writel(ctrl, priv->base + IMX_OCOTP_ADDR_CTRL);
+
+	/* 47.3.1.3.4
+	 * Write the data to the HW_OCOTP_DATA register. This will automatically
+	 * set HW_OCOTP_CTRL[BUSY] and clear HW_OCOTP_CTRL[WR_UNLOCK]. To
+	 * protect programming same OTP bit twice, before program OCOTP will
+	 * automatically read fuse value in OTP and use read value to mask
+	 * program data. The controller will use masked program data to program
+	 * a 32-bit word in the OTP per the address in HW_OCOTP_CTRL[ADDR]. Bit
+	 * fields with 1's will result in that OTP bit being programmed. Bit
+	 * fields with 0's will be ignored. At the same time that the write is
+	 * accepted, the controller makes an internal copy of
+	 * HW_OCOTP_CTRL[ADDR] which cannot be updated until the next write
+	 * sequence is initiated. This copy guarantees that erroneous writes to
+	 * HW_OCOTP_CTRL[ADDR] will not affect an active write operation. It
+	 * should also be noted that during the programming HW_OCOTP_DATA will
+	 * shift right (with zero fill). This shifting is required to program
+	 * the OTP serially. During the write operation, HW_OCOTP_DATA cannot be
+	 * modified.
+	 * Note: on i.MX7 there are four data fields to write for banked write
+	 *       with the fuse blowing operation only taking place after data0
+	 *	 has been written. This is why data0 must always be the last
+	 *	 register written.
+	 */
+	if (priv->params->bank_address_words != 0) {
+		/* Banked/i.MX7 mode */
+		switch (word) {
+		case 0:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 1:
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 2:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 3:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		}
+	} else {
+		/* Non-banked i.MX6 mode */
+		writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+	}
+
+	/* 47.4.1.4.5
+	 * Once complete, the controller will clear BUSY. A write request to a
+	 * protected or locked region will result in no OTP access and no
+	 * setting of HW_OCOTP_CTRL[BUSY]. In addition HW_OCOTP_CTRL[ERROR] will
+	 * be set. It must be cleared by software before any new write access
+	 * can be issued.
+	 */
+	ret = imx_ocotp_wait_for_busy(priv, 0);
+	if (ret < 0) {
+		if (ret == -EPERM) {
+			dev_err(priv->dev, "failed write to locked region");
+			imx_ocotp_clr_err_if_set(priv);
+		} else {
+			dev_err(priv->dev, "timeout during data write\n");
+		}
+		goto write_end;
+	}
+
+	/* 47.3.1.4
+	 * Write Postamble: Due to internal electrical characteristics of the
+	 * OTP during writes, all OTP operations following a write must be
+	 * separated by 2 us after the clearing of HW_OCOTP_CTRL_BUSY following
+	 * the write.
+	 */
+	udelay(2);
+
+	/* reload all shadow registers */
+	writel(priv->params->ctrl.bm_rel_shadows,
+	       priv->base + IMX_OCOTP_ADDR_CTRL_SET);
+	ret = imx_ocotp_wait_for_busy(priv,
+				      priv->params->ctrl.bm_rel_shadows);
+	if (ret < 0)
+		dev_err(priv->dev, "timeout during shadow register reload\n");
+
+write_end:
+	clk_disable_unprepare(priv->clk);
+	mutex_unlock(&ocotp_mutex);
+	return ret < 0 ? ret : bytes;
+}
+
+static struct nvmem_config imx_ocotp_nvmem_config = {
+	.name = "imx-ocotp",
+	.read_only = false,
+	.word_size = 4,
+	.stride = 1,
+	.reg_read = imx_ocotp_read,
+	.reg_write = imx_ocotp_write,
+	.cell_post_process = imx_ocotp_cell_pp,
+};
+
+static const struct ocotp_params imx6q_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6sl_params = {
+	.nregs = 64,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6sll_params = {
+	.nregs = 80,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6sx_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6ul_params = {
+	.nregs = 144,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx6ull_params = {
+	.nregs = 80,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx7d_params = {
+	.nregs = 64,
+	.bank_address_words = 4,
+	.set_timing = imx_ocotp_set_imx7_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx7ulp_params = {
+	.nregs = 256,
+	.bank_address_words = 0,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+};
+
+static const struct ocotp_params imx8mq_params = {
+	.nregs = 256,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+	.reverse_mac_address = true,
+};
+
+static const struct ocotp_params imx8mm_params = {
+	.nregs = 256,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+	.reverse_mac_address = true,
+};
+
+static const struct ocotp_params imx8mn_params = {
+	.nregs = 256,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
+	.reverse_mac_address = true,
+};
+
+static const struct ocotp_params imx8mp_params = {
+	.nregs = 384,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_8MP,
+	.reverse_mac_address = true,
+};
+
+static const struct of_device_id imx_ocotp_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-ocotp",  .data = &imx6q_params },
+	{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
+	{ .compatible = "fsl,imx6sx-ocotp", .data = &imx6sx_params },
+	{ .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params },
+	{ .compatible = "fsl,imx6ull-ocotp", .data = &imx6ull_params },
+	{ .compatible = "fsl,imx7d-ocotp",  .data = &imx7d_params },
+	{ .compatible = "fsl,imx6sll-ocotp", .data = &imx6sll_params },
+	{ .compatible = "fsl,imx7ulp-ocotp", .data = &imx7ulp_params },
+	{ .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
+	{ .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params },
+	{ .compatible = "fsl,imx8mn-ocotp", .data = &imx8mn_params },
+	{ .compatible = "fsl,imx8mp-ocotp", .data = &imx8mp_params },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
+
+static int imx_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ocotp_priv *priv;
+	struct nvmem_device *nvmem;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+
+	priv->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk))
+		return PTR_ERR(priv->clk);
+
+	priv->params = of_device_get_match_data(&pdev->dev);
+	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
+	imx_ocotp_nvmem_config.dev = dev;
+	imx_ocotp_nvmem_config.priv = priv;
+	priv->config = &imx_ocotp_nvmem_config;
+
+	clk_prepare_enable(priv->clk);
+	imx_ocotp_clr_err_if_set(priv);
+	clk_disable_unprepare(priv->clk);
+
+	nvmem = devm_nvmem_register(dev, &imx_ocotp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver imx_ocotp_driver = {
+	.probe	= imx_ocotp_probe,
+	.driver = {
+		.name	= "imx_ocotp",
+		.of_match_table = imx_ocotp_dt_ids,
+	},
+};
+module_platform_driver(imx_ocotp_driver);
+
+MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
+MODULE_DESCRIPTION("i.MX6/i.MX7 OCOTP fuse box driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/jz4780-efuse.c b/drivers/nvmem/jz4780-efuse.c
new file mode 100644
index 000000000..0b01b840e
--- /dev/null
+++ b/drivers/nvmem/jz4780-efuse.c
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * JZ4780 EFUSE Memory Support driver
+ *
+ * Copyright (c) 2017 PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
+ * Copyright (c) 2020 H. Nikolaus Schaller <hns@goldelico.com>
+ */
+
+/*
+ * Currently supports JZ4780 efuse which has 8K programmable bit.
+ * Efuse is separated into seven segments as below:
+ *
+ * -----------------------------------------------------------------------
+ * | 64 bit | 128 bit | 128 bit | 3520 bit | 8 bit | 2296 bit | 2048 bit |
+ * -----------------------------------------------------------------------
+ *
+ * The rom itself is accessed using a 9 bit address line and an 8 word wide bus
+ * which reads/writes based on strobes. The strobe is configured in the config
+ * register and is based on number of cycles of the bus clock.
+ *
+ * Driver supports read only as the writes are done in the Factory.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/timer.h>
+
+#define JZ_EFUCTRL		(0x0)	/* Control Register */
+#define JZ_EFUCFG		(0x4)	/* Configure Register*/
+#define JZ_EFUSTATE		(0x8)	/* Status Register */
+#define JZ_EFUDATA(n)		(0xC + (n) * 4)
+
+/* We read 32 byte chunks to avoid complexity in the driver. */
+#define JZ_EFU_READ_SIZE 32
+
+#define EFUCTRL_ADDR_MASK	0x3FF
+#define EFUCTRL_ADDR_SHIFT	21
+#define EFUCTRL_LEN_MASK	0x1F
+#define EFUCTRL_LEN_SHIFT	16
+#define EFUCTRL_PG_EN		BIT(15)
+#define EFUCTRL_WR_EN		BIT(1)
+#define EFUCTRL_RD_EN		BIT(0)
+
+#define EFUCFG_INT_EN		BIT(31)
+#define EFUCFG_RD_ADJ_MASK	0xF
+#define EFUCFG_RD_ADJ_SHIFT	20
+#define EFUCFG_RD_STR_MASK	0xF
+#define EFUCFG_RD_STR_SHIFT	16
+#define EFUCFG_WR_ADJ_MASK	0xF
+#define EFUCFG_WR_ADJ_SHIFT	12
+#define EFUCFG_WR_STR_MASK	0xFFF
+#define EFUCFG_WR_STR_SHIFT	0
+
+#define EFUSTATE_WR_DONE	BIT(1)
+#define EFUSTATE_RD_DONE	BIT(0)
+
+struct jz4780_efuse {
+	struct device *dev;
+	struct regmap *map;
+	struct clk *clk;
+};
+
+/* main entry point */
+static int jz4780_efuse_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct jz4780_efuse *efuse = context;
+
+	while (bytes > 0) {
+		size_t start = offset & ~(JZ_EFU_READ_SIZE - 1);
+		size_t chunk = min(bytes, (start + JZ_EFU_READ_SIZE)
+				    - offset);
+		char buf[JZ_EFU_READ_SIZE];
+		unsigned int tmp;
+		u32 ctrl;
+		int ret;
+
+		ctrl = (start << EFUCTRL_ADDR_SHIFT)
+			| ((JZ_EFU_READ_SIZE - 1) << EFUCTRL_LEN_SHIFT)
+			| EFUCTRL_RD_EN;
+
+		regmap_update_bits(efuse->map, JZ_EFUCTRL,
+				   (EFUCTRL_ADDR_MASK << EFUCTRL_ADDR_SHIFT) |
+				   (EFUCTRL_LEN_MASK << EFUCTRL_LEN_SHIFT) |
+				   EFUCTRL_PG_EN | EFUCTRL_WR_EN |
+				   EFUCTRL_RD_EN,
+				   ctrl);
+
+		ret = regmap_read_poll_timeout(efuse->map, JZ_EFUSTATE,
+					       tmp, tmp & EFUSTATE_RD_DONE,
+					       1 * MSEC_PER_SEC,
+					       50 * MSEC_PER_SEC);
+		if (ret < 0) {
+			dev_err(efuse->dev, "Time out while reading efuse data");
+			return ret;
+		}
+
+		ret = regmap_bulk_read(efuse->map, JZ_EFUDATA(0),
+				       buf, JZ_EFU_READ_SIZE / sizeof(u32));
+		if (ret < 0)
+			return ret;
+
+		memcpy(val, &buf[offset - start], chunk);
+
+		val += chunk;
+		offset += chunk;
+		bytes -= chunk;
+	}
+
+	return 0;
+}
+
+static struct nvmem_config jz4780_efuse_nvmem_config = {
+	.name = "jz4780-efuse",
+	.size = 1024,
+	.word_size = 1,
+	.stride = 1,
+	.owner = THIS_MODULE,
+	.reg_read = jz4780_efuse_read,
+};
+
+static const struct regmap_config jz4780_efuse_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = JZ_EFUDATA(7),
+};
+
+static void clk_disable_unprepare_helper(void *clock)
+{
+	clk_disable_unprepare(clock);
+}
+
+static int jz4780_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	struct jz4780_efuse *efuse;
+	struct nvmem_config cfg;
+	unsigned long clk_rate;
+	unsigned long rd_adj;
+	unsigned long rd_strobe;
+	struct device *dev = &pdev->dev;
+	void __iomem *regs;
+	int ret;
+
+	efuse = devm_kzalloc(dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	efuse->map = devm_regmap_init_mmio(dev, regs,
+					   &jz4780_efuse_regmap_config);
+	if (IS_ERR(efuse->map))
+		return PTR_ERR(efuse->map);
+
+	efuse->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(efuse->clk))
+		return PTR_ERR(efuse->clk);
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(&pdev->dev,
+				       clk_disable_unprepare_helper,
+				       efuse->clk);
+	if (ret < 0)
+		return ret;
+
+	clk_rate = clk_get_rate(efuse->clk);
+
+	efuse->dev = dev;
+
+	/*
+	 * rd_adj and rd_strobe are 4 bit values
+	 * conditions:
+	 *   bus clk_period * (rd_adj + 1) > 6.5ns
+	 *   bus clk_period * (rd_adj + 5 + rd_strobe) > 35ns
+	 *   i.e. rd_adj >= 6.5ns / clk_period
+	 *   i.e. rd_strobe >= 35 ns / clk_period - 5 - rd_adj + 1
+	 * constants:
+	 *   1 / 6.5ns == 153846154 Hz
+	 *   1 / 35ns == 28571429 Hz
+	 */
+
+	rd_adj = clk_rate / 153846154;
+	rd_strobe = clk_rate / 28571429 - 5 - rd_adj + 1;
+
+	if (rd_adj > EFUCFG_RD_ADJ_MASK ||
+	    rd_strobe > EFUCFG_RD_STR_MASK) {
+		dev_err(&pdev->dev, "Cannot set clock configuration\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(efuse->map, JZ_EFUCFG,
+			   (EFUCFG_RD_ADJ_MASK << EFUCFG_RD_ADJ_SHIFT) |
+			   (EFUCFG_RD_STR_MASK << EFUCFG_RD_STR_SHIFT),
+			   (rd_adj << EFUCFG_RD_ADJ_SHIFT) |
+			   (rd_strobe << EFUCFG_RD_STR_SHIFT));
+
+	cfg = jz4780_efuse_nvmem_config;
+	cfg.dev = &pdev->dev;
+	cfg.priv = efuse;
+
+	nvmem = devm_nvmem_register(dev, &cfg);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id jz4780_efuse_match[] = {
+	{ .compatible = "ingenic,jz4780-efuse" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, jz4780_efuse_match);
+
+static struct platform_driver jz4780_efuse_driver = {
+	.probe  = jz4780_efuse_probe,
+	.driver = {
+		.name = "jz4780-efuse",
+		.of_match_table = jz4780_efuse_match,
+	},
+};
+module_platform_driver(jz4780_efuse_driver);
+
+MODULE_AUTHOR("PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>");
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
+MODULE_DESCRIPTION("Ingenic JZ4780 efuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/lan9662-otpc.c b/drivers/nvmem/lan9662-otpc.c
new file mode 100644
index 000000000..56fc19f09
--- /dev/null
+++ b/drivers/nvmem/lan9662-otpc.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define OTP_OTP_PWR_DN(t)			(t + 0x00)
+#define OTP_OTP_PWR_DN_OTP_PWRDN_N		BIT(0)
+#define OTP_OTP_ADDR_HI(t)			(t + 0x04)
+#define OTP_OTP_ADDR_LO(t)			(t + 0x08)
+#define OTP_OTP_PRGM_DATA(t)			(t + 0x10)
+#define OTP_OTP_PRGM_MODE(t)			(t + 0x14)
+#define OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE	BIT(0)
+#define OTP_OTP_RD_DATA(t)			(t + 0x18)
+#define OTP_OTP_FUNC_CMD(t)			(t + 0x20)
+#define OTP_OTP_FUNC_CMD_OTP_PROGRAM		BIT(1)
+#define OTP_OTP_FUNC_CMD_OTP_READ		BIT(0)
+#define OTP_OTP_CMD_GO(t)			(t + 0x28)
+#define OTP_OTP_CMD_GO_OTP_GO			BIT(0)
+#define OTP_OTP_PASS_FAIL(t)			(t + 0x2c)
+#define OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED	BIT(3)
+#define OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED	BIT(2)
+#define OTP_OTP_PASS_FAIL_OTP_FAIL		BIT(0)
+#define OTP_OTP_STATUS(t)			(t + 0x30)
+#define OTP_OTP_STATUS_OTP_CPUMPEN		BIT(1)
+#define OTP_OTP_STATUS_OTP_BUSY			BIT(0)
+
+#define OTP_MEM_SIZE 8192
+#define OTP_SLEEP_US 10
+#define OTP_TIMEOUT_US 500000
+
+struct lan9662_otp {
+	struct device *dev;
+	void __iomem *base;
+};
+
+static int lan9662_otp_wait_flag_clear(void __iomem *reg, u32 flag)
+{
+	u32 val;
+
+	return readl_poll_timeout(reg, val, !(val & flag),
+				  OTP_SLEEP_US, OTP_TIMEOUT_US);
+}
+
+static int lan9662_otp_power(struct lan9662_otp *otp, bool up)
+{
+	void __iomem *pwrdn = OTP_OTP_PWR_DN(otp->base);
+
+	if (up) {
+		writel(readl(pwrdn) & ~OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn);
+		if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base),
+						OTP_OTP_STATUS_OTP_CPUMPEN))
+			return -ETIMEDOUT;
+	} else {
+		writel(readl(pwrdn) | OTP_OTP_PWR_DN_OTP_PWRDN_N, pwrdn);
+	}
+
+	return 0;
+}
+
+static int lan9662_otp_execute(struct lan9662_otp *otp)
+{
+	if (lan9662_otp_wait_flag_clear(OTP_OTP_CMD_GO(otp->base),
+					OTP_OTP_CMD_GO_OTP_GO))
+		return -ETIMEDOUT;
+
+	if (lan9662_otp_wait_flag_clear(OTP_OTP_STATUS(otp->base),
+					OTP_OTP_STATUS_OTP_BUSY))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static void lan9662_otp_set_address(struct lan9662_otp *otp, u32 offset)
+{
+	writel(0xff & (offset >> 8), OTP_OTP_ADDR_HI(otp->base));
+	writel(0xff & offset, OTP_OTP_ADDR_LO(otp->base));
+}
+
+static int lan9662_otp_read_byte(struct lan9662_otp *otp, u32 offset, u8 *dst)
+{
+	u32 pass;
+	int rc;
+
+	lan9662_otp_set_address(otp, offset);
+	writel(OTP_OTP_FUNC_CMD_OTP_READ, OTP_OTP_FUNC_CMD(otp->base));
+	writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base));
+	rc = lan9662_otp_execute(otp);
+	if (!rc) {
+		pass = readl(OTP_OTP_PASS_FAIL(otp->base));
+		if (pass & OTP_OTP_PASS_FAIL_OTP_READ_PROHIBITED)
+			return -EACCES;
+		*dst = (u8) readl(OTP_OTP_RD_DATA(otp->base));
+	}
+	return rc;
+}
+
+static int lan9662_otp_write_byte(struct lan9662_otp *otp, u32 offset, u8 data)
+{
+	u32 pass;
+	int rc;
+
+	lan9662_otp_set_address(otp, offset);
+	writel(OTP_OTP_PRGM_MODE_OTP_PGM_MODE_BYTE, OTP_OTP_PRGM_MODE(otp->base));
+	writel(data, OTP_OTP_PRGM_DATA(otp->base));
+	writel(OTP_OTP_FUNC_CMD_OTP_PROGRAM, OTP_OTP_FUNC_CMD(otp->base));
+	writel(OTP_OTP_CMD_GO_OTP_GO, OTP_OTP_CMD_GO(otp->base));
+
+	rc = lan9662_otp_execute(otp);
+	if (!rc) {
+		pass = readl(OTP_OTP_PASS_FAIL(otp->base));
+		if (pass & OTP_OTP_PASS_FAIL_OTP_WRITE_PROHIBITED)
+			return -EACCES;
+		if (pass & OTP_OTP_PASS_FAIL_OTP_FAIL)
+			return -EIO;
+	}
+	return rc;
+}
+
+static int lan9662_otp_read(void *context, unsigned int offset,
+			    void *_val, size_t bytes)
+{
+	struct lan9662_otp *otp = context;
+	u8 *val = _val;
+	uint8_t data;
+	int i, rc = 0;
+
+	lan9662_otp_power(otp, true);
+	for (i = 0; i < bytes; i++) {
+		rc = lan9662_otp_read_byte(otp, offset + i, &data);
+		if (rc < 0)
+			break;
+		*val++ = data;
+	}
+	lan9662_otp_power(otp, false);
+
+	return rc;
+}
+
+static int lan9662_otp_write(void *context, unsigned int offset,
+			     void *_val, size_t bytes)
+{
+	struct lan9662_otp *otp = context;
+	u8 *val = _val;
+	u8 data, newdata;
+	int i, rc = 0;
+
+	lan9662_otp_power(otp, true);
+	for (i = 0; i < bytes; i++) {
+		/* Skip zero bytes */
+		if (val[i]) {
+			rc = lan9662_otp_read_byte(otp, offset + i, &data);
+			if (rc < 0)
+				break;
+
+			newdata = data | val[i];
+			if (newdata == data)
+				continue;
+
+			rc = lan9662_otp_write_byte(otp, offset + i,
+						      newdata);
+			if (rc < 0)
+				break;
+		}
+	}
+	lan9662_otp_power(otp, false);
+
+	return rc;
+}
+
+static struct nvmem_config otp_config = {
+	.name = "lan9662-otp",
+	.stride = 1,
+	.word_size = 1,
+	.reg_read = lan9662_otp_read,
+	.reg_write = lan9662_otp_write,
+	.size = OTP_MEM_SIZE,
+};
+
+static int lan9662_otp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct lan9662_otp *otp;
+
+	otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	otp->dev = dev;
+	otp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(otp->base))
+		return PTR_ERR(otp->base);
+
+	otp_config.priv = otp;
+	otp_config.dev = dev;
+
+	nvmem = devm_nvmem_register(dev, &otp_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id lan9662_otp_match[] = {
+	{ .compatible = "microchip,lan9662-otpc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lan9662_otp_match);
+
+static struct platform_driver lan9662_otp_driver = {
+	.probe = lan9662_otp_probe,
+	.driver = {
+		.name = "lan9662-otp",
+		.of_match_table = lan9662_otp_match,
+	},
+};
+module_platform_driver(lan9662_otp_driver);
+
+MODULE_AUTHOR("Horatiu Vultur <horatiu.vultur@microchip.com>");
+MODULE_DESCRIPTION("lan9662 OTP driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/layerscape-sfp.c b/drivers/nvmem/layerscape-sfp.c
new file mode 100644
index 000000000..e2b424561
--- /dev/null
+++ b/drivers/nvmem/layerscape-sfp.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Layerscape SFP driver
+ *
+ * Copyright (c) 2022 Michael Walle <michael@walle.cc>
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define LAYERSCAPE_SFP_OTP_OFFSET	0x0200
+
+struct layerscape_sfp_priv {
+	struct regmap *regmap;
+};
+
+struct layerscape_sfp_data {
+	int size;
+	enum regmap_endian endian;
+};
+
+static int layerscape_sfp_read(void *context, unsigned int offset, void *val,
+			       size_t bytes)
+{
+	struct layerscape_sfp_priv *priv = context;
+
+	return regmap_bulk_read(priv->regmap,
+				LAYERSCAPE_SFP_OTP_OFFSET + offset, val,
+				bytes / 4);
+}
+
+static struct nvmem_config layerscape_sfp_nvmem_config = {
+	.name = "fsl-sfp",
+	.reg_read = layerscape_sfp_read,
+	.word_size = 4,
+	.stride = 4,
+};
+
+static int layerscape_sfp_probe(struct platform_device *pdev)
+{
+	const struct layerscape_sfp_data *data;
+	struct layerscape_sfp_priv *priv;
+	struct nvmem_device *nvmem;
+	struct regmap_config config = { 0 };
+	void __iomem *base;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	data = device_get_match_data(&pdev->dev);
+	config.reg_bits = 32;
+	config.reg_stride = 4;
+	config.val_bits = 32;
+	config.val_format_endian = data->endian;
+	config.max_register = LAYERSCAPE_SFP_OTP_OFFSET + data->size - 4;
+	priv->regmap = devm_regmap_init_mmio(&pdev->dev, base, &config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	layerscape_sfp_nvmem_config.size = data->size;
+	layerscape_sfp_nvmem_config.dev = &pdev->dev;
+	layerscape_sfp_nvmem_config.priv = priv;
+
+	nvmem = devm_nvmem_register(&pdev->dev, &layerscape_sfp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct layerscape_sfp_data ls1021a_data = {
+	.size = 0x88,
+	.endian = REGMAP_ENDIAN_BIG,
+};
+
+static const struct layerscape_sfp_data ls1028a_data = {
+	.size = 0x88,
+	.endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static const struct of_device_id layerscape_sfp_dt_ids[] = {
+	{ .compatible = "fsl,ls1021a-sfp", .data = &ls1021a_data },
+	{ .compatible = "fsl,ls1028a-sfp", .data = &ls1028a_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, layerscape_sfp_dt_ids);
+
+static struct platform_driver layerscape_sfp_driver = {
+	.probe	= layerscape_sfp_probe,
+	.driver = {
+		.name	= "layerscape_sfp",
+		.of_match_table = layerscape_sfp_dt_ids,
+	},
+};
+module_platform_driver(layerscape_sfp_driver);
+
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_DESCRIPTION("Layerscape Security Fuse Processor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/lpc18xx_eeprom.c b/drivers/nvmem/lpc18xx_eeprom.c
new file mode 100644
index 000000000..a0275b29a
--- /dev/null
+++ b/drivers/nvmem/lpc18xx_eeprom.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NXP LPC18xx/LPC43xx EEPROM memory NVMEM driver
+ *
+ * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+/* Registers */
+#define LPC18XX_EEPROM_AUTOPROG			0x00c
+#define LPC18XX_EEPROM_AUTOPROG_WORD		0x1
+
+#define LPC18XX_EEPROM_CLKDIV			0x014
+
+#define LPC18XX_EEPROM_PWRDWN			0x018
+#define LPC18XX_EEPROM_PWRDWN_NO		0x0
+#define LPC18XX_EEPROM_PWRDWN_YES		0x1
+
+#define LPC18XX_EEPROM_INTSTAT			0xfe0
+#define LPC18XX_EEPROM_INTSTAT_END_OF_PROG	BIT(2)
+
+#define LPC18XX_EEPROM_INTSTATCLR		0xfe8
+#define LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST	BIT(2)
+
+/* Fixed page size (bytes) */
+#define LPC18XX_EEPROM_PAGE_SIZE		0x80
+
+/* EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) */
+#define LPC18XX_EEPROM_CLOCK_HZ			1500000
+
+/* EEPROM requires 3 ms of erase/program time between each writing */
+#define LPC18XX_EEPROM_PROGRAM_TIME		3
+
+struct lpc18xx_eeprom_dev {
+	struct clk *clk;
+	void __iomem *reg_base;
+	void __iomem *mem_base;
+	struct nvmem_device *nvmem;
+	unsigned reg_bytes;
+	unsigned val_bytes;
+	int size;
+};
+
+static inline void lpc18xx_eeprom_writel(struct lpc18xx_eeprom_dev *eeprom,
+					 u32 reg, u32 val)
+{
+	writel(val, eeprom->reg_base + reg);
+}
+
+static inline u32 lpc18xx_eeprom_readl(struct lpc18xx_eeprom_dev *eeprom,
+				       u32 reg)
+{
+	return readl(eeprom->reg_base + reg);
+}
+
+static int lpc18xx_eeprom_busywait_until_prog(struct lpc18xx_eeprom_dev *eeprom)
+{
+	unsigned long end;
+	u32 val;
+
+	/* Wait until EEPROM program operation has finished */
+	end = jiffies + msecs_to_jiffies(LPC18XX_EEPROM_PROGRAM_TIME * 10);
+
+	while (time_is_after_jiffies(end)) {
+		val = lpc18xx_eeprom_readl(eeprom, LPC18XX_EEPROM_INTSTAT);
+
+		if (val & LPC18XX_EEPROM_INTSTAT_END_OF_PROG) {
+			lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_INTSTATCLR,
+					LPC18XX_EEPROM_INTSTATCLR_PROG_CLR_ST);
+			return 0;
+		}
+
+		usleep_range(LPC18XX_EEPROM_PROGRAM_TIME * USEC_PER_MSEC,
+			     (LPC18XX_EEPROM_PROGRAM_TIME + 1) * USEC_PER_MSEC);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int lpc18xx_eeprom_gather_write(void *context, unsigned int reg,
+				       void *val, size_t bytes)
+{
+	struct lpc18xx_eeprom_dev *eeprom = context;
+	unsigned int offset = reg;
+	int ret;
+
+	/*
+	 * The last page contains the EEPROM initialization data and is not
+	 * writable.
+	 */
+	if ((reg > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE) ||
+			(reg + bytes > eeprom->size - LPC18XX_EEPROM_PAGE_SIZE))
+		return -EINVAL;
+
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_NO);
+
+	/* Wait 100 us while the EEPROM wakes up */
+	usleep_range(100, 200);
+
+	while (bytes) {
+		writel(*(u32 *)val, eeprom->mem_base + offset);
+		ret = lpc18xx_eeprom_busywait_until_prog(eeprom);
+		if (ret < 0)
+			return ret;
+
+		bytes -= eeprom->val_bytes;
+		val += eeprom->val_bytes;
+		offset += eeprom->val_bytes;
+	}
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_YES);
+
+	return 0;
+}
+
+static int lpc18xx_eeprom_read(void *context, unsigned int offset,
+			       void *val, size_t bytes)
+{
+	struct lpc18xx_eeprom_dev *eeprom = context;
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_NO);
+
+	/* Wait 100 us while the EEPROM wakes up */
+	usleep_range(100, 200);
+
+	while (bytes) {
+		*(u32 *)val = readl(eeprom->mem_base + offset);
+		bytes -= eeprom->val_bytes;
+		val += eeprom->val_bytes;
+		offset += eeprom->val_bytes;
+	}
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_YES);
+
+	return 0;
+}
+
+
+static struct nvmem_config lpc18xx_nvmem_config = {
+	.name = "lpc18xx-eeprom",
+	.stride = 4,
+	.word_size = 4,
+	.reg_read = lpc18xx_eeprom_read,
+	.reg_write = lpc18xx_eeprom_gather_write,
+};
+
+static int lpc18xx_eeprom_probe(struct platform_device *pdev)
+{
+	struct lpc18xx_eeprom_dev *eeprom;
+	struct device *dev = &pdev->dev;
+	struct reset_control *rst;
+	unsigned long clk_rate;
+	struct resource *res;
+	int ret;
+
+	eeprom = devm_kzalloc(dev, sizeof(*eeprom), GFP_KERNEL);
+	if (!eeprom)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg");
+	eeprom->reg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(eeprom->reg_base))
+		return PTR_ERR(eeprom->reg_base);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem");
+	eeprom->mem_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(eeprom->mem_base))
+		return PTR_ERR(eeprom->mem_base);
+
+	eeprom->clk = devm_clk_get(&pdev->dev, "eeprom");
+	if (IS_ERR(eeprom->clk)) {
+		dev_err(&pdev->dev, "failed to get eeprom clock\n");
+		return PTR_ERR(eeprom->clk);
+	}
+
+	ret = clk_prepare_enable(eeprom->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to prepare/enable eeprom clk: %d\n", ret);
+		return ret;
+	}
+
+	rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(rst)) {
+		dev_err(dev, "failed to get reset: %ld\n", PTR_ERR(rst));
+		ret = PTR_ERR(rst);
+		goto err_clk;
+	}
+
+	ret = reset_control_assert(rst);
+	if (ret < 0) {
+		dev_err(dev, "failed to assert reset: %d\n", ret);
+		goto err_clk;
+	}
+
+	eeprom->val_bytes = 4;
+	eeprom->reg_bytes = 4;
+
+	/*
+	 * Clock rate is generated by dividing the system bus clock by the
+	 * division factor, contained in the divider register (minus 1 encoded).
+	 */
+	clk_rate = clk_get_rate(eeprom->clk);
+	clk_rate = DIV_ROUND_UP(clk_rate, LPC18XX_EEPROM_CLOCK_HZ) - 1;
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_CLKDIV, clk_rate);
+
+	/*
+	 * Writing a single word to the page will start the erase/program cycle
+	 * automatically
+	 */
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_AUTOPROG,
+			      LPC18XX_EEPROM_AUTOPROG_WORD);
+
+	lpc18xx_eeprom_writel(eeprom, LPC18XX_EEPROM_PWRDWN,
+			      LPC18XX_EEPROM_PWRDWN_YES);
+
+	eeprom->size = resource_size(res);
+	lpc18xx_nvmem_config.size = resource_size(res);
+	lpc18xx_nvmem_config.dev = dev;
+	lpc18xx_nvmem_config.priv = eeprom;
+
+	eeprom->nvmem = devm_nvmem_register(dev, &lpc18xx_nvmem_config);
+	if (IS_ERR(eeprom->nvmem)) {
+		ret = PTR_ERR(eeprom->nvmem);
+		goto err_clk;
+	}
+
+	platform_set_drvdata(pdev, eeprom);
+
+	return 0;
+
+err_clk:
+	clk_disable_unprepare(eeprom->clk);
+
+	return ret;
+}
+
+static int lpc18xx_eeprom_remove(struct platform_device *pdev)
+{
+	struct lpc18xx_eeprom_dev *eeprom = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(eeprom->clk);
+
+	return 0;
+}
+
+static const struct of_device_id lpc18xx_eeprom_of_match[] = {
+	{ .compatible = "nxp,lpc1857-eeprom" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_eeprom_of_match);
+
+static struct platform_driver lpc18xx_eeprom_driver = {
+	.probe = lpc18xx_eeprom_probe,
+	.remove = lpc18xx_eeprom_remove,
+	.driver = {
+		.name = "lpc18xx-eeprom",
+		.of_match_table = lpc18xx_eeprom_of_match,
+	},
+};
+
+module_platform_driver(lpc18xx_eeprom_driver);
+
+MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
+MODULE_DESCRIPTION("NXP LPC18xx EEPROM memory Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/lpc18xx_otp.c b/drivers/nvmem/lpc18xx_otp.c
new file mode 100644
index 000000000..16c92ea85
--- /dev/null
+++ b/drivers/nvmem/lpc18xx_otp.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * NXP LPC18xx/43xx OTP memory NVMEM driver
+ *
+ * Copyright (c) 2016 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on the imx ocotp driver,
+ * Copyright (c) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * TODO: add support for writing OTP register via API in boot ROM.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/*
+ * LPC18xx OTP memory contains 4 banks with 4 32-bit words. Bank 0 starts
+ * at offset 0 from the base.
+ *
+ * Bank 0 contains the part ID for Flashless devices and is reseverd for
+ * devices with Flash.
+ * Bank 1/2 is generale purpose or AES key storage for secure devices.
+ * Bank 3 contains control data, USB ID and generale purpose words.
+ */
+#define LPC18XX_OTP_NUM_BANKS		4
+#define LPC18XX_OTP_WORDS_PER_BANK	4
+#define LPC18XX_OTP_WORD_SIZE		sizeof(u32)
+#define LPC18XX_OTP_SIZE		(LPC18XX_OTP_NUM_BANKS * \
+					 LPC18XX_OTP_WORDS_PER_BANK * \
+					 LPC18XX_OTP_WORD_SIZE)
+
+struct lpc18xx_otp {
+	void __iomem *base;
+};
+
+static int lpc18xx_otp_read(void *context, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	struct lpc18xx_otp *otp = context;
+	unsigned int count = bytes >> 2;
+	u32 index = offset >> 2;
+	u32 *buf = val;
+	int i;
+
+	if (count > (LPC18XX_OTP_SIZE - index))
+		count = LPC18XX_OTP_SIZE - index;
+
+	for (i = index; i < (index + count); i++)
+		*buf++ = readl(otp->base + i * LPC18XX_OTP_WORD_SIZE);
+
+	return 0;
+}
+
+static struct nvmem_config lpc18xx_otp_nvmem_config = {
+	.name = "lpc18xx-otp",
+	.read_only = true,
+	.word_size = LPC18XX_OTP_WORD_SIZE,
+	.stride = LPC18XX_OTP_WORD_SIZE,
+	.reg_read = lpc18xx_otp_read,
+};
+
+static int lpc18xx_otp_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	struct lpc18xx_otp *otp;
+	struct resource *res;
+
+	otp = devm_kzalloc(&pdev->dev, sizeof(*otp), GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	otp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(otp->base))
+		return PTR_ERR(otp->base);
+
+	lpc18xx_otp_nvmem_config.size = LPC18XX_OTP_SIZE;
+	lpc18xx_otp_nvmem_config.dev = &pdev->dev;
+	lpc18xx_otp_nvmem_config.priv = otp;
+
+	nvmem = devm_nvmem_register(&pdev->dev, &lpc18xx_otp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id lpc18xx_otp_dt_ids[] = {
+	{ .compatible = "nxp,lpc1850-otp" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_otp_dt_ids);
+
+static struct platform_driver lpc18xx_otp_driver = {
+	.probe	= lpc18xx_otp_probe,
+	.driver = {
+		.name	= "lpc18xx_otp",
+		.of_match_table = lpc18xx_otp_dt_ids,
+	},
+};
+module_platform_driver(lpc18xx_otp_driver);
+
+MODULE_AUTHOR("Joachim Eastwoood <manabian@gmail.com>");
+MODULE_DESCRIPTION("NXP LPC18xx OTP NVMEM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c
new file mode 100644
index 000000000..d6b533497
--- /dev/null
+++ b/drivers/nvmem/meson-efuse.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic Meson GX eFuse Driver
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <linux/firmware/meson/meson_sm.h>
+
+static int meson_efuse_read(void *context, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	struct meson_sm_firmware *fw = context;
+
+	return meson_sm_call_read(fw, (u8 *)val, bytes, SM_EFUSE_READ, offset,
+				  bytes, 0, 0, 0);
+}
+
+static int meson_efuse_write(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct meson_sm_firmware *fw = context;
+
+	return meson_sm_call_write(fw, (u8 *)val, bytes, SM_EFUSE_WRITE, offset,
+				   bytes, 0, 0, 0);
+}
+
+static const struct of_device_id meson_efuse_match[] = {
+	{ .compatible = "amlogic,meson-gxbb-efuse", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_efuse_match);
+
+static int meson_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct meson_sm_firmware *fw;
+	struct device_node *sm_np;
+	struct nvmem_device *nvmem;
+	struct nvmem_config *econfig;
+	struct clk *clk;
+	unsigned int size;
+	int ret;
+
+	sm_np = of_parse_phandle(pdev->dev.of_node, "secure-monitor", 0);
+	if (!sm_np) {
+		dev_err(&pdev->dev, "no secure-monitor node\n");
+		return -ENODEV;
+	}
+
+	fw = meson_sm_get(sm_np);
+	of_node_put(sm_np);
+	if (!fw)
+		return -EPROBE_DEFER;
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get efuse gate");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(dev, "failed to enable gate");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev,
+				       (void(*)(void *))clk_disable_unprepare,
+				       clk);
+	if (ret) {
+		dev_err(dev, "failed to add disable callback");
+		return ret;
+	}
+
+	if (meson_sm_call(fw, SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0) {
+		dev_err(dev, "failed to get max user");
+		return -EINVAL;
+	}
+
+	econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL);
+	if (!econfig)
+		return -ENOMEM;
+
+	econfig->dev = dev;
+	econfig->name = dev_name(dev);
+	econfig->stride = 1;
+	econfig->word_size = 1;
+	econfig->reg_read = meson_efuse_read;
+	econfig->reg_write = meson_efuse_write;
+	econfig->size = size;
+	econfig->priv = fw;
+
+	nvmem = devm_nvmem_register(&pdev->dev, econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver meson_efuse_driver = {
+	.probe = meson_efuse_probe,
+	.driver = {
+		.name = "meson-efuse",
+		.of_match_table = meson_efuse_match,
+	},
+};
+
+module_platform_driver(meson_efuse_driver);
+
+MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
+MODULE_DESCRIPTION("Amlogic Meson GX NVMEM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/meson-mx-efuse.c b/drivers/nvmem/meson-mx-efuse.c
new file mode 100644
index 000000000..13eb14316
--- /dev/null
+++ b/drivers/nvmem/meson-mx-efuse.c
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic Meson6, Meson8 and Meson8b eFuse Driver
+ *
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#define MESON_MX_EFUSE_CNTL1					0x04
+#define MESON_MX_EFUSE_CNTL1_PD_ENABLE				BIT(27)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY			BIT(26)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_START			BIT(25)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE			BIT(24)
+#define MESON_MX_EFUSE_CNTL1_BYTE_WR_DATA			GENMASK(23, 16)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_BUSY			BIT(14)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_START			BIT(13)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_ENABLE			BIT(12)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET			BIT(11)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK			GENMASK(10, 0)
+
+#define MESON_MX_EFUSE_CNTL2					0x08
+
+#define MESON_MX_EFUSE_CNTL4					0x10
+#define MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE			BIT(10)
+
+struct meson_mx_efuse_platform_data {
+	const char *name;
+	unsigned int word_size;
+};
+
+struct meson_mx_efuse {
+	void __iomem *base;
+	struct clk *core_clk;
+	struct nvmem_device *nvmem;
+	struct nvmem_config config;
+};
+
+static void meson_mx_efuse_mask_bits(struct meson_mx_efuse *efuse, u32 reg,
+				     u32 mask, u32 set)
+{
+	u32 data;
+
+	data = readl(efuse->base + reg);
+	data &= ~mask;
+	data |= (set & mask);
+
+	writel(data, efuse->base + reg);
+}
+
+static int meson_mx_efuse_hw_enable(struct meson_mx_efuse *efuse)
+{
+	int err;
+
+	err = clk_prepare_enable(efuse->core_clk);
+	if (err)
+		return err;
+
+	/* power up the efuse */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE, 0);
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL4,
+				 MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE, 0);
+
+	return 0;
+}
+
+static void meson_mx_efuse_hw_disable(struct meson_mx_efuse *efuse)
+{
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE);
+
+	clk_disable_unprepare(efuse->core_clk);
+}
+
+static int meson_mx_efuse_read_addr(struct meson_mx_efuse *efuse,
+				    unsigned int addr, u32 *value)
+{
+	int err;
+	u32 regval;
+
+	/* write the address to read */
+	regval = FIELD_PREP(MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, addr);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, regval);
+
+	/* inform the hardware that we changed the address */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET, 0);
+
+	/* start the read process */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START, 0);
+
+	/*
+	 * perform a dummy read to ensure that the HW has the RD_BUSY bit set
+	 * when polling for the status below.
+	 */
+	readl(efuse->base + MESON_MX_EFUSE_CNTL1);
+
+	err = readl_poll_timeout_atomic(efuse->base + MESON_MX_EFUSE_CNTL1,
+			regval,
+			(!(regval & MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY)),
+			1, 1000);
+	if (err) {
+		dev_err(efuse->config.dev,
+			"Timeout while reading efuse address %u\n", addr);
+		return err;
+	}
+
+	*value = readl(efuse->base + MESON_MX_EFUSE_CNTL2);
+
+	return 0;
+}
+
+static int meson_mx_efuse_read(void *context, unsigned int offset,
+			       void *buf, size_t bytes)
+{
+	struct meson_mx_efuse *efuse = context;
+	u32 tmp;
+	int err, i, addr;
+
+	err = meson_mx_efuse_hw_enable(efuse);
+	if (err)
+		return err;
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE);
+
+	for (i = 0; i < bytes; i += efuse->config.word_size) {
+		addr = (offset + i) / efuse->config.word_size;
+
+		err = meson_mx_efuse_read_addr(efuse, addr, &tmp);
+		if (err)
+			break;
+
+		memcpy(buf + i, &tmp,
+		       min_t(size_t, bytes - i, efuse->config.word_size));
+	}
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE, 0);
+
+	meson_mx_efuse_hw_disable(efuse);
+
+	return err;
+}
+
+static const struct meson_mx_efuse_platform_data meson6_efuse_data = {
+	.name = "meson6-efuse",
+	.word_size = 1,
+};
+
+static const struct meson_mx_efuse_platform_data meson8_efuse_data = {
+	.name = "meson8-efuse",
+	.word_size = 4,
+};
+
+static const struct meson_mx_efuse_platform_data meson8b_efuse_data = {
+	.name = "meson8b-efuse",
+	.word_size = 4,
+};
+
+static const struct of_device_id meson_mx_efuse_match[] = {
+	{ .compatible = "amlogic,meson6-efuse", .data = &meson6_efuse_data },
+	{ .compatible = "amlogic,meson8-efuse", .data = &meson8_efuse_data },
+	{ .compatible = "amlogic,meson8b-efuse", .data = &meson8b_efuse_data },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_mx_efuse_match);
+
+static int meson_mx_efuse_probe(struct platform_device *pdev)
+{
+	const struct meson_mx_efuse_platform_data *drvdata;
+	struct meson_mx_efuse *efuse;
+	struct resource *res;
+
+	drvdata = of_device_get_match_data(&pdev->dev);
+	if (!drvdata)
+		return -EINVAL;
+
+	efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	efuse->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
+
+	efuse->config.name = drvdata->name;
+	efuse->config.owner = THIS_MODULE;
+	efuse->config.dev = &pdev->dev;
+	efuse->config.priv = efuse;
+	efuse->config.stride = drvdata->word_size;
+	efuse->config.word_size = drvdata->word_size;
+	efuse->config.size = SZ_512;
+	efuse->config.read_only = true;
+	efuse->config.reg_read = meson_mx_efuse_read;
+
+	efuse->core_clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(efuse->core_clk)) {
+		dev_err(&pdev->dev, "Failed to get core clock\n");
+		return PTR_ERR(efuse->core_clk);
+	}
+
+	efuse->nvmem = devm_nvmem_register(&pdev->dev, &efuse->config);
+
+	return PTR_ERR_OR_ZERO(efuse->nvmem);
+}
+
+static struct platform_driver meson_mx_efuse_driver = {
+	.probe = meson_mx_efuse_probe,
+	.driver = {
+		.name = "meson-mx-efuse",
+		.of_match_table = meson_mx_efuse_match,
+	},
+};
+
+module_platform_driver(meson_mx_efuse_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Amlogic Meson MX eFuse NVMEM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/microchip-otpc.c b/drivers/nvmem/microchip-otpc.c
new file mode 100644
index 000000000..436e0dc4f
--- /dev/null
+++ b/drivers/nvmem/microchip-otpc.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OTP Memory controller
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define MCHP_OTPC_CR			(0x0)
+#define MCHP_OTPC_CR_READ		BIT(6)
+#define MCHP_OTPC_MR			(0x4)
+#define MCHP_OTPC_MR_ADDR		GENMASK(31, 16)
+#define MCHP_OTPC_AR			(0x8)
+#define MCHP_OTPC_SR			(0xc)
+#define MCHP_OTPC_SR_READ		BIT(6)
+#define MCHP_OTPC_HR			(0x20)
+#define MCHP_OTPC_HR_SIZE		GENMASK(15, 8)
+#define MCHP_OTPC_DR			(0x24)
+
+#define MCHP_OTPC_NAME			"mchp-otpc"
+#define MCHP_OTPC_SIZE			(11 * 1024)
+
+/**
+ * struct mchp_otpc - OTPC private data structure
+ * @base: base address
+ * @dev: struct device pointer
+ * @packets: list of packets in OTP memory
+ * @npackets: number of packets in OTP memory
+ */
+struct mchp_otpc {
+	void __iomem *base;
+	struct device *dev;
+	struct list_head packets;
+	u32 npackets;
+};
+
+/**
+ * struct mchp_otpc_packet - OTPC packet data structure
+ * @list: list head
+ * @id: packet ID
+ * @offset: packet offset (in words) in OTP memory
+ */
+struct mchp_otpc_packet {
+	struct list_head list;
+	u32 id;
+	u32 offset;
+};
+
+static struct mchp_otpc_packet *mchp_otpc_id_to_packet(struct mchp_otpc *otpc,
+						       u32 id)
+{
+	struct mchp_otpc_packet *packet;
+
+	if (id >= otpc->npackets)
+		return NULL;
+
+	list_for_each_entry(packet, &otpc->packets, list) {
+		if (packet->id == id)
+			return packet;
+	}
+
+	return NULL;
+}
+
+static int mchp_otpc_prepare_read(struct mchp_otpc *otpc,
+				  unsigned int offset)
+{
+	u32 tmp;
+
+	/* Set address. */
+	tmp = readl_relaxed(otpc->base + MCHP_OTPC_MR);
+	tmp &= ~MCHP_OTPC_MR_ADDR;
+	tmp |= FIELD_PREP(MCHP_OTPC_MR_ADDR, offset);
+	writel_relaxed(tmp, otpc->base + MCHP_OTPC_MR);
+
+	/* Set read. */
+	tmp = readl_relaxed(otpc->base + MCHP_OTPC_CR);
+	tmp |= MCHP_OTPC_CR_READ;
+	writel_relaxed(tmp, otpc->base + MCHP_OTPC_CR);
+
+	/* Wait for packet to be transferred into temporary buffers. */
+	return read_poll_timeout(readl_relaxed, tmp, !(tmp & MCHP_OTPC_SR_READ),
+				 10000, 2000, false, otpc->base + MCHP_OTPC_SR);
+}
+
+/*
+ * OTPC memory is organized into packets. Each packets contains a header and
+ * a payload. Header is 4 bytes long and contains the size of the payload.
+ * Payload size varies. The memory footprint is something as follows:
+ *
+ * Memory offset  Memory footprint     Packet ID
+ * -------------  ----------------     ---------
+ *
+ * 0x0            +------------+   <-- packet 0
+ *                | header  0  |
+ * 0x4            +------------+
+ *                | payload 0  |
+ *                .            .
+ *                .    ...     .
+ *                .            .
+ * offset1        +------------+   <-- packet 1
+ *                | header  1  |
+ * offset1 + 0x4  +------------+
+ *                | payload 1  |
+ *                .            .
+ *                .    ...     .
+ *                .            .
+ * offset2        +------------+   <-- packet 2
+ *                .            .
+ *                .    ...     .
+ *                .            .
+ * offsetN        +------------+   <-- packet N
+ *                | header  N  |
+ * offsetN + 0x4  +------------+
+ *                | payload N  |
+ *                .            .
+ *                .    ...     .
+ *                .            .
+ *                +------------+
+ *
+ * where offset1, offset2, offsetN depends on the size of payload 0, payload 1,
+ * payload N-1.
+ *
+ * The access to memory is done on a per packet basis: the control registers
+ * need to be updated with an offset address (within a packet range) and the
+ * data registers will be update by controller with information contained by
+ * that packet. E.g. if control registers are updated with any address within
+ * the range [offset1, offset2) the data registers are updated by controller
+ * with packet 1. Header data is accessible though MCHP_OTPC_HR register.
+ * Payload data is accessible though MCHP_OTPC_DR and MCHP_OTPC_AR registers.
+ * There is no direct mapping b/w the offset requested by software and the
+ * offset returned by hardware.
+ *
+ * For this, the read function will return the first requested bytes in the
+ * packet. The user will have to be aware of the memory footprint before doing
+ * the read request.
+ */
+static int mchp_otpc_read(void *priv, unsigned int off, void *val,
+			  size_t bytes)
+{
+	struct mchp_otpc *otpc = priv;
+	struct mchp_otpc_packet *packet;
+	u32 *buf = val;
+	u32 offset;
+	size_t len = 0;
+	int ret, payload_size;
+
+	/*
+	 * We reach this point with off being multiple of stride = 4 to
+	 * be able to cross the subsystem. Inside the driver we use continuous
+	 * unsigned integer numbers for packet id, thus devide off by 4
+	 * before passing it to mchp_otpc_id_to_packet().
+	 */
+	packet = mchp_otpc_id_to_packet(otpc, off / 4);
+	if (!packet)
+		return -EINVAL;
+	offset = packet->offset;
+
+	while (len < bytes) {
+		ret = mchp_otpc_prepare_read(otpc, offset);
+		if (ret)
+			return ret;
+
+		/* Read and save header content. */
+		*buf++ = readl_relaxed(otpc->base + MCHP_OTPC_HR);
+		len += sizeof(*buf);
+		offset++;
+		if (len >= bytes)
+			break;
+
+		/* Read and save payload content. */
+		payload_size = FIELD_GET(MCHP_OTPC_HR_SIZE, *(buf - 1));
+		writel_relaxed(0UL, otpc->base + MCHP_OTPC_AR);
+		do {
+			*buf++ = readl_relaxed(otpc->base + MCHP_OTPC_DR);
+			len += sizeof(*buf);
+			offset++;
+			payload_size--;
+		} while (payload_size >= 0 && len < bytes);
+	}
+
+	return 0;
+}
+
+static int mchp_otpc_init_packets_list(struct mchp_otpc *otpc, u32 *size)
+{
+	struct mchp_otpc_packet *packet;
+	u32 word, word_pos = 0, id = 0, npackets = 0, payload_size;
+	int ret;
+
+	INIT_LIST_HEAD(&otpc->packets);
+	*size = 0;
+
+	while (*size < MCHP_OTPC_SIZE) {
+		ret = mchp_otpc_prepare_read(otpc, word_pos);
+		if (ret)
+			return ret;
+
+		word = readl_relaxed(otpc->base + MCHP_OTPC_HR);
+		payload_size = FIELD_GET(MCHP_OTPC_HR_SIZE, word);
+		if (!payload_size)
+			break;
+
+		packet = devm_kzalloc(otpc->dev, sizeof(*packet), GFP_KERNEL);
+		if (!packet)
+			return -ENOMEM;
+
+		packet->id = id++;
+		packet->offset = word_pos;
+		INIT_LIST_HEAD(&packet->list);
+		list_add_tail(&packet->list, &otpc->packets);
+
+		/* Count size by adding header and paload sizes. */
+		*size += 4 * (payload_size + 1);
+		/* Next word: this packet (header, payload) position + 1. */
+		word_pos += payload_size + 2;
+
+		npackets++;
+	}
+
+	otpc->npackets = npackets;
+
+	return 0;
+}
+
+static struct nvmem_config mchp_nvmem_config = {
+	.name = MCHP_OTPC_NAME,
+	.type = NVMEM_TYPE_OTP,
+	.read_only = true,
+	.word_size = 4,
+	.stride = 4,
+	.reg_read = mchp_otpc_read,
+};
+
+static int mchp_otpc_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	struct mchp_otpc *otpc;
+	u32 size;
+	int ret;
+
+	otpc = devm_kzalloc(&pdev->dev, sizeof(*otpc), GFP_KERNEL);
+	if (!otpc)
+		return -ENOMEM;
+
+	otpc->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(otpc->base))
+		return PTR_ERR(otpc->base);
+
+	otpc->dev = &pdev->dev;
+	ret = mchp_otpc_init_packets_list(otpc, &size);
+	if (ret)
+		return ret;
+
+	mchp_nvmem_config.dev = otpc->dev;
+	mchp_nvmem_config.size = size;
+	mchp_nvmem_config.priv = otpc;
+	nvmem = devm_nvmem_register(&pdev->dev, &mchp_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id __maybe_unused mchp_otpc_ids[] = {
+	{ .compatible = "microchip,sama7g5-otpc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mchp_otpc_ids);
+
+static struct platform_driver mchp_otpc_driver = {
+	.probe = mchp_otpc_probe,
+	.driver = {
+		.name = MCHP_OTPC_NAME,
+		.of_match_table = of_match_ptr(mchp_otpc_ids),
+	},
+};
+module_platform_driver(mchp_otpc_driver);
+
+MODULE_AUTHOR("Claudiu Beznea <claudiu.beznea@microchip.com>");
+MODULE_DESCRIPTION("Microchip SAMA7G5 OTPC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c
new file mode 100644
index 000000000..a08e0aedd
--- /dev/null
+++ b/drivers/nvmem/mtk-efuse.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/io.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct mtk_efuse_priv {
+	void __iomem *base;
+};
+
+static int mtk_reg_read(void *context,
+			unsigned int reg, void *_val, size_t bytes)
+{
+	struct mtk_efuse_priv *priv = context;
+	void __iomem *addr = priv->base + reg;
+	u8 *val = _val;
+	int i;
+
+	for (i = 0; i < bytes; i++, val++)
+		*val = readb(addr + i);
+
+	return 0;
+}
+
+static int mtk_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nvmem_config econfig = {};
+	struct mtk_efuse_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	econfig.stride = 1;
+	econfig.word_size = 1;
+	econfig.reg_read = mtk_reg_read;
+	econfig.size = resource_size(res);
+	econfig.priv = priv;
+	econfig.dev = dev;
+	nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id mtk_efuse_of_match[] = {
+	{ .compatible = "mediatek,mt8173-efuse",},
+	{ .compatible = "mediatek,efuse",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mtk_efuse_of_match);
+
+static struct platform_driver mtk_efuse_driver = {
+	.probe = mtk_efuse_probe,
+	.driver = {
+		.name = "mediatek,efuse",
+		.of_match_table = mtk_efuse_of_match,
+	},
+};
+
+static int __init mtk_efuse_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&mtk_efuse_driver);
+	if (ret) {
+		pr_err("Failed to register efuse driver\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit mtk_efuse_exit(void)
+{
+	return platform_driver_unregister(&mtk_efuse_driver);
+}
+
+subsys_initcall(mtk_efuse_init);
+module_exit(mtk_efuse_exit);
+
+MODULE_AUTHOR("Andrew-CT Chen <andrew-ct.chen@mediatek.com>");
+MODULE_DESCRIPTION("Mediatek EFUSE driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/mxs-ocotp.c b/drivers/nvmem/mxs-ocotp.c
new file mode 100644
index 000000000..588ab56d7
--- /dev/null
+++ b/drivers/nvmem/mxs-ocotp.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Freescale MXS On-Chip OTP driver
+ *
+ * Copyright (C) 2015 Stefan Wahren <stefan.wahren@i2se.com>
+ *
+ * Based on the driver from Huang Shijie and Christoph G. Baumann
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/stmp_device.h>
+
+/* OCOTP registers and bits */
+
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	BIT(12)
+#define BM_OCOTP_CTRL_ERROR		BIT(9)
+#define BM_OCOTP_CTRL_BUSY		BIT(8)
+
+#define OCOTP_TIMEOUT		10000
+#define OCOTP_DATA_OFFSET	0x20
+
+struct mxs_ocotp {
+	struct clk *clk;
+	void __iomem *base;
+	struct nvmem_device *nvmem;
+};
+
+static int mxs_ocotp_wait(struct mxs_ocotp *otp)
+{
+	int timeout = OCOTP_TIMEOUT;
+	unsigned int status = 0;
+
+	while (timeout--) {
+		status = readl(otp->base);
+
+		if (!(status & (BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)))
+			break;
+
+		cpu_relax();
+	}
+
+	if (status & BM_OCOTP_CTRL_BUSY)
+		return -EBUSY;
+	else if (status & BM_OCOTP_CTRL_ERROR)
+		return -EIO;
+
+	return 0;
+}
+
+static int mxs_ocotp_read(void *context, unsigned int offset,
+			  void *val, size_t bytes)
+{
+	struct mxs_ocotp *otp = context;
+	u32 *buf = val;
+	int ret;
+
+	ret = clk_enable(otp->clk);
+	if (ret)
+		return ret;
+
+	writel(BM_OCOTP_CTRL_ERROR, otp->base + STMP_OFFSET_REG_CLR);
+
+	ret = mxs_ocotp_wait(otp);
+	if (ret)
+		goto disable_clk;
+
+	/* open OCOTP banks for read */
+	writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_SET);
+
+	/* approximately wait 33 hclk cycles */
+	udelay(1);
+
+	ret = mxs_ocotp_wait(otp);
+	if (ret)
+		goto close_banks;
+
+	while (bytes) {
+		if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) {
+			/* fill up non-data register */
+			*buf++ = 0;
+		} else {
+			*buf++ = readl(otp->base + offset);
+		}
+
+		bytes -= 4;
+		offset += 4;
+	}
+
+close_banks:
+	/* close banks for power saving */
+	writel(BM_OCOTP_CTRL_RD_BANK_OPEN, otp->base + STMP_OFFSET_REG_CLR);
+
+disable_clk:
+	clk_disable(otp->clk);
+
+	return ret;
+}
+
+static struct nvmem_config ocotp_config = {
+	.name = "mxs-ocotp",
+	.stride = 16,
+	.word_size = 4,
+	.reg_read = mxs_ocotp_read,
+};
+
+struct mxs_data {
+	int size;
+};
+
+static const struct mxs_data imx23_data = {
+	.size = 0x220,
+};
+
+static const struct mxs_data imx28_data = {
+	.size = 0x2a0,
+};
+
+static const struct of_device_id mxs_ocotp_match[] = {
+	{ .compatible = "fsl,imx23-ocotp", .data = &imx23_data },
+	{ .compatible = "fsl,imx28-ocotp", .data = &imx28_data },
+	{ /* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
+
+static void mxs_ocotp_action(void *data)
+{
+	clk_unprepare(data);
+}
+
+static int mxs_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct mxs_data *data;
+	struct mxs_ocotp *otp;
+	const struct of_device_id *match;
+	int ret;
+
+	match = of_match_device(dev->driver->of_match_table, dev);
+	if (!match || !match->data)
+		return -EINVAL;
+
+	otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	otp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(otp->base))
+		return PTR_ERR(otp->base);
+
+	otp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(otp->clk))
+		return PTR_ERR(otp->clk);
+
+	ret = clk_prepare(otp->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to prepare clk: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&pdev->dev, mxs_ocotp_action, otp->clk);
+	if (ret)
+		return ret;
+
+	data = match->data;
+
+	ocotp_config.size = data->size;
+	ocotp_config.priv = otp;
+	ocotp_config.dev = dev;
+	otp->nvmem = devm_nvmem_register(dev, &ocotp_config);
+	if (IS_ERR(otp->nvmem))
+		return PTR_ERR(otp->nvmem);
+
+	platform_set_drvdata(pdev, otp);
+
+	return 0;
+}
+
+static struct platform_driver mxs_ocotp_driver = {
+	.probe = mxs_ocotp_probe,
+	.driver = {
+		.name = "mxs-ocotp",
+		.of_match_table = mxs_ocotp_match,
+	},
+};
+
+module_platform_driver(mxs_ocotp_driver);
+MODULE_AUTHOR("Stefan Wahren <wahrenst@gmx.net");
+MODULE_DESCRIPTION("driver for OCOTP in i.MX23/i.MX28");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/nintendo-otp.c b/drivers/nvmem/nintendo-otp.c
new file mode 100644
index 000000000..33961b17f
--- /dev/null
+++ b/drivers/nvmem/nintendo-otp.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Nintendo Wii and Wii U OTP driver
+ *
+ * This is a driver exposing the OTP of a Nintendo Wii or Wii U console.
+ *
+ * This memory contains common and per-console keys, signatures and
+ * related data required to access peripherals.
+ *
+ * Based on reversed documentation from https://wiiubrew.org/wiki/Hardware/OTP
+ *
+ * Copyright (C) 2021 Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define HW_OTPCMD  0
+#define HW_OTPDATA 4
+#define OTP_READ   0x80000000
+#define BANK_SIZE  128
+#define WORD_SIZE  4
+
+struct nintendo_otp_priv {
+	void __iomem *regs;
+};
+
+struct nintendo_otp_devtype_data {
+	const char *name;
+	unsigned int num_banks;
+};
+
+static const struct nintendo_otp_devtype_data hollywood_otp_data = {
+	.name = "wii-otp",
+	.num_banks = 1,
+};
+
+static const struct nintendo_otp_devtype_data latte_otp_data = {
+	.name = "wiiu-otp",
+	.num_banks = 8,
+};
+
+static int nintendo_otp_reg_read(void *context,
+				 unsigned int reg, void *_val, size_t bytes)
+{
+	struct nintendo_otp_priv *priv = context;
+	u32 *val = _val;
+	int words = bytes / WORD_SIZE;
+	u32 bank, addr;
+
+	while (words--) {
+		bank = (reg / BANK_SIZE) << 8;
+		addr = (reg / WORD_SIZE) % (BANK_SIZE / WORD_SIZE);
+		iowrite32be(OTP_READ | bank | addr, priv->regs + HW_OTPCMD);
+		*val++ = ioread32be(priv->regs + HW_OTPDATA);
+		reg += WORD_SIZE;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id nintendo_otp_of_table[] = {
+	{ .compatible = "nintendo,hollywood-otp", .data = &hollywood_otp_data },
+	{ .compatible = "nintendo,latte-otp", .data = &latte_otp_data },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, nintendo_otp_of_table);
+
+static int nintendo_otp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id =
+		of_match_device(nintendo_otp_of_table, dev);
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nintendo_otp_priv *priv;
+
+	struct nvmem_config config = {
+		.stride = WORD_SIZE,
+		.word_size = WORD_SIZE,
+		.reg_read = nintendo_otp_reg_read,
+		.read_only = true,
+		.root_only = true,
+	};
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	if (of_id->data) {
+		const struct nintendo_otp_devtype_data *data = of_id->data;
+		config.name = data->name;
+		config.size = data->num_banks * BANK_SIZE;
+	}
+
+	config.dev = dev;
+	config.priv = priv;
+
+	nvmem = devm_nvmem_register(dev, &config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver nintendo_otp_driver = {
+	.probe = nintendo_otp_probe,
+	.driver = {
+		.name = "nintendo-otp",
+		.of_match_table = nintendo_otp_of_table,
+	},
+};
+module_platform_driver(nintendo_otp_driver);
+MODULE_AUTHOR("Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>");
+MODULE_DESCRIPTION("Nintendo Wii and Wii U OTP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/qcom-spmi-sdam.c b/drivers/nvmem/qcom-spmi-sdam.c
new file mode 100644
index 000000000..849989204
--- /dev/null
+++ b/drivers/nvmem/qcom-spmi-sdam.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017, 2020-2021, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/nvmem-provider.h>
+#include <linux/regmap.h>
+
+#define SDAM_MEM_START			0x40
+#define REGISTER_MAP_ID			0x40
+#define REGISTER_MAP_VERSION		0x41
+#define SDAM_SIZE			0x44
+#define SDAM_PBS_TRIG_SET		0xE5
+#define SDAM_PBS_TRIG_CLR		0xE6
+
+struct sdam_chip {
+	struct regmap			*regmap;
+	struct nvmem_config		sdam_config;
+	unsigned int			base;
+	unsigned int			size;
+};
+
+/* read only register offsets */
+static const u8 sdam_ro_map[] = {
+	REGISTER_MAP_ID,
+	REGISTER_MAP_VERSION,
+	SDAM_SIZE
+};
+
+static bool sdam_is_valid(struct sdam_chip *sdam, unsigned int offset,
+				size_t len)
+{
+	unsigned int sdam_mem_end = SDAM_MEM_START + sdam->size - 1;
+
+	if (!len)
+		return false;
+
+	if (offset >= SDAM_MEM_START && offset <= sdam_mem_end
+				&& (offset + len - 1) <= sdam_mem_end)
+		return true;
+	else if ((offset == SDAM_PBS_TRIG_SET || offset == SDAM_PBS_TRIG_CLR)
+				&& (len == 1))
+		return true;
+
+	return false;
+}
+
+static bool sdam_is_ro(unsigned int offset, size_t len)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sdam_ro_map); i++)
+		if (offset <= sdam_ro_map[i] && (offset + len) > sdam_ro_map[i])
+			return true;
+
+	return false;
+}
+
+static int sdam_read(void *priv, unsigned int offset, void *val,
+				size_t bytes)
+{
+	struct sdam_chip *sdam = priv;
+	struct device *dev = sdam->sdam_config.dev;
+	int rc;
+
+	if (!sdam_is_valid(sdam, offset, bytes)) {
+		dev_err(dev, "Invalid SDAM offset %#x len=%zd\n",
+			offset, bytes);
+		return -EINVAL;
+	}
+
+	rc = regmap_bulk_read(sdam->regmap, sdam->base + offset, val, bytes);
+	if (rc < 0)
+		dev_err(dev, "Failed to read SDAM offset %#x len=%zd, rc=%d\n",
+						offset, bytes, rc);
+
+	return rc;
+}
+
+static int sdam_write(void *priv, unsigned int offset, void *val,
+				size_t bytes)
+{
+	struct sdam_chip *sdam = priv;
+	struct device *dev = sdam->sdam_config.dev;
+	int rc;
+
+	if (!sdam_is_valid(sdam, offset, bytes)) {
+		dev_err(dev, "Invalid SDAM offset %#x len=%zd\n",
+			offset, bytes);
+		return -EINVAL;
+	}
+
+	if (sdam_is_ro(offset, bytes)) {
+		dev_err(dev, "Invalid write offset %#x len=%zd\n",
+			offset, bytes);
+		return -EINVAL;
+	}
+
+	rc = regmap_bulk_write(sdam->regmap, sdam->base + offset, val, bytes);
+	if (rc < 0)
+		dev_err(dev, "Failed to write SDAM offset %#x len=%zd, rc=%d\n",
+						offset, bytes, rc);
+
+	return rc;
+}
+
+static int sdam_probe(struct platform_device *pdev)
+{
+	struct sdam_chip *sdam;
+	struct nvmem_device *nvmem;
+	unsigned int val;
+	int rc;
+
+	sdam = devm_kzalloc(&pdev->dev, sizeof(*sdam), GFP_KERNEL);
+	if (!sdam)
+		return -ENOMEM;
+
+	sdam->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!sdam->regmap) {
+		dev_err(&pdev->dev, "Failed to get regmap handle\n");
+		return -ENXIO;
+	}
+
+	rc = of_property_read_u32(pdev->dev.of_node, "reg", &sdam->base);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Failed to get SDAM base, rc=%d\n", rc);
+		return -EINVAL;
+	}
+
+	rc = regmap_read(sdam->regmap, sdam->base + SDAM_SIZE, &val);
+	if (rc < 0) {
+		dev_err(&pdev->dev, "Failed to read SDAM_SIZE rc=%d\n", rc);
+		return -EINVAL;
+	}
+	sdam->size = val * 32;
+
+	sdam->sdam_config.dev = &pdev->dev;
+	sdam->sdam_config.name = "spmi_sdam";
+	sdam->sdam_config.id = NVMEM_DEVID_AUTO;
+	sdam->sdam_config.owner = THIS_MODULE;
+	sdam->sdam_config.stride = 1;
+	sdam->sdam_config.word_size = 1;
+	sdam->sdam_config.reg_read = sdam_read;
+	sdam->sdam_config.reg_write = sdam_write;
+	sdam->sdam_config.priv = sdam;
+
+	nvmem = devm_nvmem_register(&pdev->dev, &sdam->sdam_config);
+	if (IS_ERR(nvmem)) {
+		dev_err(&pdev->dev,
+			"Failed to register SDAM nvmem device rc=%ld\n",
+			PTR_ERR(nvmem));
+		return -ENXIO;
+	}
+	dev_dbg(&pdev->dev,
+		"SDAM base=%#x size=%u registered successfully\n",
+		sdam->base, sdam->size);
+
+	return 0;
+}
+
+static const struct of_device_id sdam_match_table[] = {
+	{ .compatible = "qcom,spmi-sdam" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdam_match_table);
+
+static struct platform_driver sdam_driver = {
+	.driver = {
+		.name = "qcom,spmi-sdam",
+		.of_match_table = sdam_match_table,
+	},
+	.probe		= sdam_probe,
+};
+
+static int __init sdam_init(void)
+{
+	return platform_driver_register(&sdam_driver);
+}
+subsys_initcall(sdam_init);
+
+static void __exit sdam_exit(void)
+{
+	return platform_driver_unregister(&sdam_driver);
+}
+module_exit(sdam_exit);
+
+MODULE_DESCRIPTION("QCOM SPMI SDAM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
new file mode 100644
index 000000000..c1e893c8a
--- /dev/null
+++ b/drivers/nvmem/qfprom.c
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+
+/* Blow timer clock frequency in Mhz */
+#define QFPROM_BLOW_TIMER_OFFSET 0x03c
+
+/* Amount of time required to hold charge to blow fuse in micro-seconds */
+#define QFPROM_FUSE_BLOW_POLL_US	100
+#define QFPROM_FUSE_BLOW_TIMEOUT_US	10000
+
+#define QFPROM_BLOW_STATUS_OFFSET	0x048
+#define QFPROM_BLOW_STATUS_BUSY		0x1
+#define QFPROM_BLOW_STATUS_READY	0x0
+
+#define QFPROM_ACCEL_OFFSET		0x044
+
+#define QFPROM_VERSION_OFFSET		0x0
+#define QFPROM_MAJOR_VERSION_SHIFT	28
+#define QFPROM_MAJOR_VERSION_MASK	GENMASK(31, QFPROM_MAJOR_VERSION_SHIFT)
+#define QFPROM_MINOR_VERSION_SHIFT	16
+#define QFPROM_MINOR_VERSION_MASK	GENMASK(27, QFPROM_MINOR_VERSION_SHIFT)
+
+static bool read_raw_data;
+module_param(read_raw_data, bool, 0644);
+MODULE_PARM_DESC(read_raw_data, "Read raw instead of corrected data");
+
+/**
+ * struct qfprom_soc_data - config that varies from SoC to SoC.
+ *
+ * @accel_value:             Should contain qfprom accel value.
+ * @qfprom_blow_timer_value: The timer value of qfprom when doing efuse blow.
+ * @qfprom_blow_set_freq:    The frequency required to set when we start the
+ *                           fuse blowing.
+ * @qfprom_blow_uV:          LDO voltage to be set when doing efuse blow
+ */
+struct qfprom_soc_data {
+	u32 accel_value;
+	u32 qfprom_blow_timer_value;
+	u32 qfprom_blow_set_freq;
+	int qfprom_blow_uV;
+};
+
+/**
+ * struct qfprom_priv - structure holding qfprom attributes
+ *
+ * @qfpraw:       iomapped memory space for qfprom-efuse raw address space.
+ * @qfpconf:      iomapped memory space for qfprom-efuse configuration address
+ *                space.
+ * @qfpcorrected: iomapped memory space for qfprom corrected address space.
+ * @qfpsecurity:  iomapped memory space for qfprom security control space.
+ * @dev:          qfprom device structure.
+ * @secclk:       Clock supply.
+ * @vcc:          Regulator supply.
+ * @soc_data:     Data that for things that varies from SoC to SoC.
+ */
+struct qfprom_priv {
+	void __iomem *qfpraw;
+	void __iomem *qfpconf;
+	void __iomem *qfpcorrected;
+	void __iomem *qfpsecurity;
+	struct device *dev;
+	struct clk *secclk;
+	struct regulator *vcc;
+	const struct qfprom_soc_data *soc_data;
+};
+
+/**
+ * struct qfprom_touched_values - saved values to restore after blowing
+ *
+ * @clk_rate: The rate the clock was at before blowing.
+ * @accel_val: The value of the accel reg before blowing.
+ * @timer_val: The value of the timer before blowing.
+ */
+struct qfprom_touched_values {
+	unsigned long clk_rate;
+	u32 accel_val;
+	u32 timer_val;
+};
+
+/**
+ * struct qfprom_soc_compatible_data - Data matched against the SoC
+ * compatible string.
+ *
+ * @keepout: Array of keepout regions for this SoC.
+ * @nkeepout: Number of elements in the keepout array.
+ */
+struct qfprom_soc_compatible_data {
+	const struct nvmem_keepout *keepout;
+	unsigned int nkeepout;
+};
+
+static const struct nvmem_keepout sc7180_qfprom_keepout[] = {
+	{.start = 0x128, .end = 0x148},
+	{.start = 0x220, .end = 0x228}
+};
+
+static const struct qfprom_soc_compatible_data sc7180_qfprom = {
+	.keepout = sc7180_qfprom_keepout,
+	.nkeepout = ARRAY_SIZE(sc7180_qfprom_keepout)
+};
+
+static const struct nvmem_keepout sc7280_qfprom_keepout[] = {
+	{.start = 0x128, .end = 0x148},
+	{.start = 0x238, .end = 0x248}
+};
+
+static const struct qfprom_soc_compatible_data sc7280_qfprom = {
+	.keepout = sc7280_qfprom_keepout,
+	.nkeepout = ARRAY_SIZE(sc7280_qfprom_keepout)
+};
+
+/**
+ * qfprom_disable_fuse_blowing() - Undo enabling of fuse blowing.
+ * @priv: Our driver data.
+ * @old:  The data that was stashed from before fuse blowing.
+ *
+ * Resets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors but doesn't return an error code
+ * since there's not much we can do upon failure.
+ */
+static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
+					const struct qfprom_touched_values *old)
+{
+	int ret;
+
+	writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
+	dev_pm_genpd_set_performance_state(priv->dev, 0);
+	pm_runtime_put(priv->dev);
+
+	/*
+	 * This may be a shared rail and may be able to run at a lower rate
+	 * when we're not blowing fuses.  At the moment, the regulator framework
+	 * applies voltage constraints even on disabled rails, so remove our
+	 * constraints and allow the rail to be adjusted by other users.
+	 */
+	ret = regulator_set_voltage(priv->vcc, 0, INT_MAX);
+	if (ret)
+		dev_warn(priv->dev, "Failed to set 0 voltage (ignoring)\n");
+
+	ret = regulator_disable(priv->vcc);
+	if (ret)
+		dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n");
+
+	ret = clk_set_rate(priv->secclk, old->clk_rate);
+	if (ret)
+		dev_warn(priv->dev,
+			 "Failed to set clock rate for disable (ignoring)\n");
+
+	clk_disable_unprepare(priv->secclk);
+}
+
+/**
+ * qfprom_enable_fuse_blowing() - Enable fuse blowing.
+ * @priv: Our driver data.
+ * @old:  We'll stash stuff here to use when disabling.
+ *
+ * Sets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors so caller doesn't need to.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
+				      struct qfprom_touched_values *old)
+{
+	int ret;
+	int qfprom_blow_uV = priv->soc_data->qfprom_blow_uV;
+
+	ret = clk_prepare_enable(priv->secclk);
+	if (ret) {
+		dev_err(priv->dev, "Failed to enable clock\n");
+		return ret;
+	}
+
+	old->clk_rate = clk_get_rate(priv->secclk);
+	ret = clk_set_rate(priv->secclk, priv->soc_data->qfprom_blow_set_freq);
+	if (ret) {
+		dev_err(priv->dev, "Failed to set clock rate for enable\n");
+		goto err_clk_prepared;
+	}
+
+	/*
+	 * Hardware requires a minimum voltage for fuse blowing.
+	 * This may be a shared rail so don't specify a maximum.
+	 * Regulator constraints will cap to the actual maximum.
+	 */
+	ret = regulator_set_voltage(priv->vcc, qfprom_blow_uV, INT_MAX);
+	if (ret) {
+		dev_err(priv->dev, "Failed to set %duV\n", qfprom_blow_uV);
+		goto err_clk_rate_set;
+	}
+
+	ret = regulator_enable(priv->vcc);
+	if (ret) {
+		dev_err(priv->dev, "Failed to enable regulator\n");
+		goto err_clk_rate_set;
+	}
+
+	ret = pm_runtime_resume_and_get(priv->dev);
+	if (ret < 0) {
+		dev_err(priv->dev, "Failed to enable power-domain\n");
+		goto err_reg_enable;
+	}
+	dev_pm_genpd_set_performance_state(priv->dev, INT_MAX);
+
+	old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
+	writel(priv->soc_data->qfprom_blow_timer_value,
+	       priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+	writel(priv->soc_data->accel_value,
+	       priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
+	return 0;
+
+err_reg_enable:
+	regulator_disable(priv->vcc);
+err_clk_rate_set:
+	clk_set_rate(priv->secclk, old->clk_rate);
+err_clk_prepared:
+	clk_disable_unprepare(priv->secclk);
+	return ret;
+}
+
+/**
+ * qfprom_reg_write() - Write to fuses.
+ * @context: Our driver data.
+ * @reg:     The offset to write at.
+ * @_val:    Pointer to data to write.
+ * @bytes:   The number of bytes to write.
+ *
+ * Writes to fuses.  WARNING: THIS IS PERMANENT.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_reg_write(void *context, unsigned int reg, void *_val,
+			    size_t bytes)
+{
+	struct qfprom_priv *priv = context;
+	struct qfprom_touched_values old;
+	int words = bytes / 4;
+	u32 *value = _val;
+	u32 blow_status;
+	int ret;
+	int i;
+
+	dev_dbg(priv->dev,
+		"Writing to raw qfprom region : %#010x of size: %zu\n",
+		reg, bytes);
+
+	/*
+	 * The hardware only allows us to write word at a time, but we can
+	 * read byte at a time.  Until the nvmem framework allows a separate
+	 * word_size and stride for reading vs. writing, we'll enforce here.
+	 */
+	if (bytes % 4) {
+		dev_err(priv->dev,
+			"%zu is not an integral number of words\n", bytes);
+		return -EINVAL;
+	}
+	if (reg % 4) {
+		dev_err(priv->dev,
+			"Invalid offset: %#x.  Must be word aligned\n", reg);
+		return -EINVAL;
+	}
+
+	ret = qfprom_enable_fuse_blowing(priv, &old);
+	if (ret)
+		return ret;
+
+	ret = readl_relaxed_poll_timeout(
+		priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+		blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+		QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+	if (ret) {
+		dev_err(priv->dev,
+			"Timeout waiting for initial ready; aborting.\n");
+		goto exit_enabled_fuse_blowing;
+	}
+
+	for (i = 0; i < words; i++)
+		writel(value[i], priv->qfpraw + reg + (i * 4));
+
+	ret = readl_relaxed_poll_timeout(
+		priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+		blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+		QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+	/* Give an error, but not much we can do in this case */
+	if (ret)
+		dev_err(priv->dev, "Timeout waiting for finish.\n");
+
+exit_enabled_fuse_blowing:
+	qfprom_disable_fuse_blowing(priv, &old);
+
+	return ret;
+}
+
+static int qfprom_reg_read(void *context,
+			unsigned int reg, void *_val, size_t bytes)
+{
+	struct qfprom_priv *priv = context;
+	u8 *val = _val;
+	int i = 0, words = bytes;
+	void __iomem *base = priv->qfpcorrected;
+
+	if (read_raw_data && priv->qfpraw)
+		base = priv->qfpraw;
+
+	while (words--)
+		*val++ = readb(base + reg + i++);
+
+	return 0;
+}
+
+static void qfprom_runtime_disable(void *data)
+{
+	pm_runtime_disable(data);
+}
+
+static const struct qfprom_soc_data qfprom_7_8_data = {
+	.accel_value = 0xD10,
+	.qfprom_blow_timer_value = 25,
+	.qfprom_blow_set_freq = 4800000,
+	.qfprom_blow_uV = 1800000,
+};
+
+static const struct qfprom_soc_data qfprom_7_15_data = {
+	.accel_value = 0xD08,
+	.qfprom_blow_timer_value = 24,
+	.qfprom_blow_set_freq = 4800000,
+	.qfprom_blow_uV = 1900000,
+};
+
+static int qfprom_probe(struct platform_device *pdev)
+{
+	struct nvmem_config econfig = {
+		.name = "qfprom",
+		.stride = 1,
+		.word_size = 1,
+		.id = NVMEM_DEVID_AUTO,
+		.reg_read = qfprom_reg_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	const struct qfprom_soc_compatible_data *soc_data;
+	struct qfprom_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* The corrected section is always provided */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->qfpcorrected = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->qfpcorrected))
+		return PTR_ERR(priv->qfpcorrected);
+
+	econfig.size = resource_size(res);
+	econfig.dev = dev;
+	econfig.priv = priv;
+
+	priv->dev = dev;
+	soc_data = device_get_match_data(dev);
+	if (soc_data) {
+		econfig.keepout = soc_data->keepout;
+		econfig.nkeepout = soc_data->nkeepout;
+	}
+
+	/*
+	 * If more than one region is provided then the OS has the ability
+	 * to write.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (res) {
+		u32 version;
+		int major_version, minor_version;
+
+		priv->qfpraw = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->qfpraw))
+			return PTR_ERR(priv->qfpraw);
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+		priv->qfpconf = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->qfpconf))
+			return PTR_ERR(priv->qfpconf);
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+		priv->qfpsecurity = devm_ioremap_resource(dev, res);
+		if (IS_ERR(priv->qfpsecurity))
+			return PTR_ERR(priv->qfpsecurity);
+
+		version = readl(priv->qfpsecurity + QFPROM_VERSION_OFFSET);
+		major_version = (version & QFPROM_MAJOR_VERSION_MASK) >>
+				QFPROM_MAJOR_VERSION_SHIFT;
+		minor_version = (version & QFPROM_MINOR_VERSION_MASK) >>
+				QFPROM_MINOR_VERSION_SHIFT;
+
+		if (major_version == 7 && minor_version == 8)
+			priv->soc_data = &qfprom_7_8_data;
+		else if (major_version == 7 && minor_version == 15)
+			priv->soc_data = &qfprom_7_15_data;
+
+		priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+		if (IS_ERR(priv->vcc))
+			return PTR_ERR(priv->vcc);
+
+		priv->secclk = devm_clk_get(dev, "core");
+		if (IS_ERR(priv->secclk)) {
+			ret = PTR_ERR(priv->secclk);
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "Error getting clock: %d\n", ret);
+			return ret;
+		}
+
+		/* Only enable writing if we have SoC data. */
+		if (priv->soc_data)
+			econfig.reg_write = qfprom_reg_write;
+	}
+
+	pm_runtime_enable(dev);
+	ret = devm_add_action_or_reset(dev, qfprom_runtime_disable, dev);
+	if (ret)
+		return ret;
+
+	nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id qfprom_of_match[] = {
+	{ .compatible = "qcom,qfprom",},
+	{ .compatible = "qcom,sc7180-qfprom", .data = &sc7180_qfprom},
+	{ .compatible = "qcom,sc7280-qfprom", .data = &sc7280_qfprom},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, qfprom_of_match);
+
+static struct platform_driver qfprom_driver = {
+	.probe = qfprom_probe,
+	.driver = {
+		.name = "qcom,qfprom",
+		.of_match_table = qfprom_of_match,
+	},
+};
+module_platform_driver(qfprom_driver);
+MODULE_AUTHOR("Srinivas Kandagatla <srinivas.kandagatla@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm QFPROM driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/rave-sp-eeprom.c b/drivers/nvmem/rave-sp-eeprom.c
new file mode 100644
index 000000000..66699d44f
--- /dev/null
+++ b/drivers/nvmem/rave-sp-eeprom.c
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * EEPROM driver for RAVE SP
+ *
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/mfd/rave-sp.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+
+/**
+ * enum rave_sp_eeprom_access_type - Supported types of EEPROM access
+ *
+ * @RAVE_SP_EEPROM_WRITE:	EEPROM write
+ * @RAVE_SP_EEPROM_READ:	EEPROM read
+ */
+enum rave_sp_eeprom_access_type {
+	RAVE_SP_EEPROM_WRITE = 0,
+	RAVE_SP_EEPROM_READ  = 1,
+};
+
+/**
+ * enum rave_sp_eeprom_header_size - EEPROM command header sizes
+ *
+ * @RAVE_SP_EEPROM_HEADER_SMALL: EEPROM header size for "small" devices (< 8K)
+ * @RAVE_SP_EEPROM_HEADER_BIG:	 EEPROM header size for "big" devices (> 8K)
+ */
+enum rave_sp_eeprom_header_size {
+	RAVE_SP_EEPROM_HEADER_SMALL = 4U,
+	RAVE_SP_EEPROM_HEADER_BIG   = 5U,
+};
+#define RAVE_SP_EEPROM_HEADER_MAX	RAVE_SP_EEPROM_HEADER_BIG
+
+#define	RAVE_SP_EEPROM_PAGE_SIZE	32U
+
+/**
+ * struct rave_sp_eeprom_page - RAVE SP EEPROM page
+ *
+ * @type:	Access type (see enum rave_sp_eeprom_access_type)
+ * @success:	Success flag (Success = 1, Failure = 0)
+ * @data:	Read data
+
+ * Note this structure corresponds to RSP_*_EEPROM payload from RAVE
+ * SP ICD
+ */
+struct rave_sp_eeprom_page {
+	u8  type;
+	u8  success;
+	u8  data[RAVE_SP_EEPROM_PAGE_SIZE];
+} __packed;
+
+/**
+ * struct rave_sp_eeprom - RAVE SP EEPROM device
+ *
+ * @sp:			Pointer to parent RAVE SP device
+ * @mutex:		Lock protecting access to EEPROM
+ * @address:		EEPROM device address
+ * @header_size:	Size of EEPROM command header for this device
+ * @dev:		Pointer to corresponding struct device used for logging
+ */
+struct rave_sp_eeprom {
+	struct rave_sp *sp;
+	struct mutex mutex;
+	u8 address;
+	unsigned int header_size;
+	struct device *dev;
+};
+
+/**
+ * rave_sp_eeprom_io - Low-level part of EEPROM page access
+ *
+ * @eeprom:	EEPROM device to write to
+ * @type:	EEPROM access type (read or write)
+ * @idx:	number of the EEPROM page
+ * @page:	Data to write or buffer to store result (via page->data)
+ *
+ * This function does all of the low-level work required to perform a
+ * EEPROM access. This includes formatting correct command payload,
+ * sending it and checking received results.
+ *
+ * Returns zero in case of success or negative error code in
+ * case of failure.
+ */
+static int rave_sp_eeprom_io(struct rave_sp_eeprom *eeprom,
+			     enum rave_sp_eeprom_access_type type,
+			     u16 idx,
+			     struct rave_sp_eeprom_page *page)
+{
+	const bool is_write = type == RAVE_SP_EEPROM_WRITE;
+	const unsigned int data_size = is_write ? sizeof(page->data) : 0;
+	const unsigned int cmd_size = eeprom->header_size + data_size;
+	const unsigned int rsp_size =
+		is_write ? sizeof(*page) - sizeof(page->data) : sizeof(*page);
+	unsigned int offset = 0;
+	u8 cmd[RAVE_SP_EEPROM_HEADER_MAX + sizeof(page->data)];
+	int ret;
+
+	if (WARN_ON(cmd_size > sizeof(cmd)))
+		return -EINVAL;
+
+	cmd[offset++] = eeprom->address;
+	cmd[offset++] = 0;
+	cmd[offset++] = type;
+	cmd[offset++] = idx;
+
+	/*
+	 * If there's still room in this command's header it means we
+	 * are talkin to EEPROM that uses 16-bit page numbers and we
+	 * have to specify index's MSB in payload as well.
+	 */
+	if (offset < eeprom->header_size)
+		cmd[offset++] = idx >> 8;
+	/*
+	 * Copy our data to write to command buffer first. In case of
+	 * a read data_size should be zero and memcpy would become a
+	 * no-op
+	 */
+	memcpy(&cmd[offset], page->data, data_size);
+
+	ret = rave_sp_exec(eeprom->sp, cmd, cmd_size, page, rsp_size);
+	if (ret)
+		return ret;
+
+	if (page->type != type)
+		return -EPROTO;
+
+	if (!page->success)
+		return -EIO;
+
+	return 0;
+}
+
+/**
+ * rave_sp_eeprom_page_access - Access single EEPROM page
+ *
+ * @eeprom:	EEPROM device to access
+ * @type:	Access type to perform (read or write)
+ * @offset:	Offset within EEPROM to access
+ * @data:	Data buffer
+ * @data_len:	Size of the data buffer
+ *
+ * This function performs a generic access to a single page or a
+ * portion thereof. Requested access MUST NOT cross the EEPROM page
+ * boundary.
+ *
+ * Returns zero in case of success or negative error code in
+ * case of failure.
+ */
+static int
+rave_sp_eeprom_page_access(struct rave_sp_eeprom *eeprom,
+			   enum rave_sp_eeprom_access_type type,
+			   unsigned int offset, u8 *data,
+			   size_t data_len)
+{
+	const unsigned int page_offset = offset % RAVE_SP_EEPROM_PAGE_SIZE;
+	const unsigned int page_nr     = offset / RAVE_SP_EEPROM_PAGE_SIZE;
+	struct rave_sp_eeprom_page page;
+	int ret;
+
+	/*
+	 * This function will not work if data access we've been asked
+	 * to do is crossing EEPROM page boundary. Normally this
+	 * should never happen and getting here would indicate a bug
+	 * in the code.
+	 */
+	if (WARN_ON(data_len > sizeof(page.data) - page_offset))
+		return -EINVAL;
+
+	if (type == RAVE_SP_EEPROM_WRITE) {
+		/*
+		 * If doing a partial write we need to do a read first
+		 * to fill the rest of the page with correct data.
+		 */
+		if (data_len < RAVE_SP_EEPROM_PAGE_SIZE) {
+			ret = rave_sp_eeprom_io(eeprom, RAVE_SP_EEPROM_READ,
+						page_nr, &page);
+			if (ret)
+				return ret;
+		}
+
+		memcpy(&page.data[page_offset], data, data_len);
+	}
+
+	ret = rave_sp_eeprom_io(eeprom, type, page_nr, &page);
+	if (ret)
+		return ret;
+
+	/*
+	 * Since we receive the result of the read via 'page.data'
+	 * buffer we need to copy that to 'data'
+	 */
+	if (type == RAVE_SP_EEPROM_READ)
+		memcpy(data, &page.data[page_offset], data_len);
+
+	return 0;
+}
+
+/**
+ * rave_sp_eeprom_access - Access EEPROM data
+ *
+ * @eeprom:	EEPROM device to access
+ * @type:	Access type to perform (read or write)
+ * @offset:	Offset within EEPROM to access
+ * @data:	Data buffer
+ * @data_len:	Size of the data buffer
+ *
+ * This function performs a generic access (either read or write) at
+ * arbitrary offset (not necessary page aligned) of arbitrary length
+ * (is not constrained by EEPROM page size).
+ *
+ * Returns zero in case of success or negative error code in case of
+ * failure.
+ */
+static int rave_sp_eeprom_access(struct rave_sp_eeprom *eeprom,
+				 enum rave_sp_eeprom_access_type type,
+				 unsigned int offset, u8 *data,
+				 unsigned int data_len)
+{
+	unsigned int residue;
+	unsigned int chunk;
+	unsigned int head;
+	int ret;
+
+	mutex_lock(&eeprom->mutex);
+
+	head    = offset % RAVE_SP_EEPROM_PAGE_SIZE;
+	residue = data_len;
+
+	do {
+		/*
+		 * First iteration, if we are doing an access that is
+		 * not 32-byte aligned, we need to access only data up
+		 * to a page boundary to avoid corssing it in
+		 * rave_sp_eeprom_page_access()
+		 */
+		if (unlikely(head)) {
+			chunk = RAVE_SP_EEPROM_PAGE_SIZE - head;
+			/*
+			 * This can only happen once per
+			 * rave_sp_eeprom_access() call, so we set
+			 * head to zero to process all the other
+			 * iterations normally.
+			 */
+			head  = 0;
+		} else {
+			chunk = RAVE_SP_EEPROM_PAGE_SIZE;
+		}
+
+		/*
+		 * We should never read more that 'residue' bytes
+		 */
+		chunk = min(chunk, residue);
+		ret = rave_sp_eeprom_page_access(eeprom, type, offset,
+						 data, chunk);
+		if (ret)
+			goto out;
+
+		residue -= chunk;
+		offset  += chunk;
+		data    += chunk;
+	} while (residue);
+out:
+	mutex_unlock(&eeprom->mutex);
+	return ret;
+}
+
+static int rave_sp_eeprom_reg_read(void *eeprom, unsigned int offset,
+				   void *val, size_t bytes)
+{
+	return rave_sp_eeprom_access(eeprom, RAVE_SP_EEPROM_READ,
+				     offset, val, bytes);
+}
+
+static int rave_sp_eeprom_reg_write(void *eeprom, unsigned int offset,
+				    void *val, size_t bytes)
+{
+	return rave_sp_eeprom_access(eeprom, RAVE_SP_EEPROM_WRITE,
+				     offset, val, bytes);
+}
+
+static int rave_sp_eeprom_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rave_sp *sp = dev_get_drvdata(dev->parent);
+	struct device_node *np = dev->of_node;
+	struct nvmem_config config = { 0 };
+	struct rave_sp_eeprom *eeprom;
+	struct nvmem_device *nvmem;
+	u32 reg[2], size;
+
+	if (of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg))) {
+		dev_err(dev, "Failed to parse \"reg\" property\n");
+		return -EINVAL;
+	}
+
+	size = reg[1];
+	/*
+	 * Per ICD, we have no more than 2 bytes to specify EEPROM
+	 * page.
+	 */
+	if (size > U16_MAX * RAVE_SP_EEPROM_PAGE_SIZE) {
+		dev_err(dev, "Specified size is too big\n");
+		return -EINVAL;
+	}
+
+	eeprom = devm_kzalloc(dev, sizeof(*eeprom), GFP_KERNEL);
+	if (!eeprom)
+		return -ENOMEM;
+
+	eeprom->address = reg[0];
+	eeprom->sp      = sp;
+	eeprom->dev     = dev;
+
+	if (size > SZ_8K)
+		eeprom->header_size = RAVE_SP_EEPROM_HEADER_BIG;
+	else
+		eeprom->header_size = RAVE_SP_EEPROM_HEADER_SMALL;
+
+	mutex_init(&eeprom->mutex);
+
+	config.id		= -1;
+	of_property_read_string(np, "zii,eeprom-name", &config.name);
+	config.priv		= eeprom;
+	config.dev		= dev;
+	config.size		= size;
+	config.reg_read		= rave_sp_eeprom_reg_read;
+	config.reg_write	= rave_sp_eeprom_reg_write;
+	config.word_size	= 1;
+	config.stride		= 1;
+
+	nvmem = devm_nvmem_register(dev, &config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id rave_sp_eeprom_of_match[] = {
+	{ .compatible = "zii,rave-sp-eeprom" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rave_sp_eeprom_of_match);
+
+static struct platform_driver rave_sp_eeprom_driver = {
+	.probe = rave_sp_eeprom_probe,
+	.driver	= {
+		.name = KBUILD_MODNAME,
+		.of_match_table = rave_sp_eeprom_of_match,
+	},
+};
+module_platform_driver(rave_sp_eeprom_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>");
+MODULE_AUTHOR("Nikita Yushchenko <nikita.yoush@cogentembedded.com>");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("RAVE SP EEPROM driver");
diff --git a/drivers/nvmem/rmem.c b/drivers/nvmem/rmem.c
new file mode 100644
index 000000000..752d0bf44
--- /dev/null
+++ b/drivers/nvmem/rmem.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+
+struct rmem {
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	struct reserved_mem *mem;
+
+	phys_addr_t size;
+};
+
+static int rmem_read(void *context, unsigned int offset,
+		     void *val, size_t bytes)
+{
+	struct rmem *priv = context;
+	size_t available = priv->mem->size;
+	loff_t off = offset;
+	void *addr;
+	int count;
+
+	/*
+	 * Only map the reserved memory at this point to avoid potential rogue
+	 * kernel threads inadvertently modifying it. Based on the current
+	 * uses-cases for this driver, the performance hit isn't a concern.
+	 * Nor is likely to be, given the nature of the subsystem. Most nvmem
+	 * devices operate over slow buses to begin with.
+	 *
+	 * An alternative would be setting the memory as RO, set_memory_ro(),
+	 * but as of Dec 2020 this isn't possible on arm64.
+	 */
+	addr = memremap(priv->mem->base, available, MEMREMAP_WB);
+	if (!addr) {
+		dev_err(priv->dev, "Failed to remap memory region\n");
+		return -ENOMEM;
+	}
+
+	count = memory_read_from_buffer(val, bytes, &off, addr, available);
+
+	memunmap(addr);
+
+	return count;
+}
+
+static int rmem_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = { };
+	struct device *dev = &pdev->dev;
+	struct reserved_mem *mem;
+	struct rmem *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	mem = of_reserved_mem_lookup(dev->of_node);
+	if (!mem) {
+		dev_err(dev, "Failed to lookup reserved memory\n");
+		return -EINVAL;
+	}
+	priv->mem = mem;
+
+	config.dev = dev;
+	config.priv = priv;
+	config.name = "rmem";
+	config.id = NVMEM_DEVID_AUTO;
+	config.size = mem->size;
+	config.reg_read = rmem_read;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static const struct of_device_id rmem_match[] = {
+	{ .compatible = "nvmem-rmem", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rmem_match);
+
+static struct platform_driver rmem_driver = {
+	.probe = rmem_probe,
+	.driver = {
+		.name = "rmem",
+		.of_match_table = rmem_match,
+	},
+};
+module_platform_driver(rmem_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
+MODULE_DESCRIPTION("Reserved Memory Based nvmem Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/rockchip-efuse.c b/drivers/nvmem/rockchip-efuse.c
new file mode 100644
index 000000000..e4579de5d
--- /dev/null
+++ b/drivers/nvmem/rockchip-efuse.c
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip eFuse Driver
+ *
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Caesar Wang <wxt@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define RK3288_A_SHIFT		6
+#define RK3288_A_MASK		0x3ff
+#define RK3288_PGENB		BIT(3)
+#define RK3288_LOAD		BIT(2)
+#define RK3288_STROBE		BIT(1)
+#define RK3288_CSB		BIT(0)
+
+#define RK3328_SECURE_SIZES	96
+#define RK3328_INT_STATUS	0x0018
+#define RK3328_DOUT		0x0020
+#define RK3328_AUTO_CTRL	0x0024
+#define RK3328_INT_FINISH	BIT(0)
+#define RK3328_AUTO_ENB		BIT(0)
+#define RK3328_AUTO_RD		BIT(1)
+
+#define RK3399_A_SHIFT		16
+#define RK3399_A_MASK		0x3ff
+#define RK3399_NBYTES		4
+#define RK3399_STROBSFTSEL	BIT(9)
+#define RK3399_RSB		BIT(7)
+#define RK3399_PD		BIT(5)
+#define RK3399_PGENB		BIT(3)
+#define RK3399_LOAD		BIT(2)
+#define RK3399_STROBE		BIT(1)
+#define RK3399_CSB		BIT(0)
+
+#define REG_EFUSE_CTRL		0x0000
+#define REG_EFUSE_DOUT		0x0004
+
+struct rockchip_efuse_chip {
+	struct device *dev;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static int rockchip_rk3288_efuse_read(void *context, unsigned int offset,
+				      void *val, size_t bytes)
+{
+	struct rockchip_efuse_chip *efuse = context;
+	u8 *buf = val;
+	int ret;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret < 0) {
+		dev_err(efuse->dev, "failed to prepare/enable efuse clk\n");
+		return ret;
+	}
+
+	writel(RK3288_LOAD | RK3288_PGENB, efuse->base + REG_EFUSE_CTRL);
+	udelay(1);
+	while (bytes--) {
+		writel(readl(efuse->base + REG_EFUSE_CTRL) &
+			     (~(RK3288_A_MASK << RK3288_A_SHIFT)),
+			     efuse->base + REG_EFUSE_CTRL);
+		writel(readl(efuse->base + REG_EFUSE_CTRL) |
+			     ((offset++ & RK3288_A_MASK) << RK3288_A_SHIFT),
+			     efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+		writel(readl(efuse->base + REG_EFUSE_CTRL) |
+			     RK3288_STROBE, efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+		*buf++ = readb(efuse->base + REG_EFUSE_DOUT);
+		writel(readl(efuse->base + REG_EFUSE_CTRL) &
+		       (~RK3288_STROBE), efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+	}
+
+	/* Switch to standby mode */
+	writel(RK3288_PGENB | RK3288_CSB, efuse->base + REG_EFUSE_CTRL);
+
+	clk_disable_unprepare(efuse->clk);
+
+	return 0;
+}
+
+static int rockchip_rk3328_efuse_read(void *context, unsigned int offset,
+				      void *val, size_t bytes)
+{
+	struct rockchip_efuse_chip *efuse = context;
+	unsigned int addr_start, addr_end, addr_offset, addr_len;
+	u32 out_value, status;
+	u8 *buf;
+	int ret, i = 0;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret < 0) {
+		dev_err(efuse->dev, "failed to prepare/enable efuse clk\n");
+		return ret;
+	}
+
+	/* 128 Byte efuse, 96 Byte for secure, 32 Byte for non-secure */
+	offset += RK3328_SECURE_SIZES;
+	addr_start = rounddown(offset, RK3399_NBYTES) / RK3399_NBYTES;
+	addr_end = roundup(offset + bytes, RK3399_NBYTES) / RK3399_NBYTES;
+	addr_offset = offset % RK3399_NBYTES;
+	addr_len = addr_end - addr_start;
+
+	buf = kzalloc(array3_size(addr_len, RK3399_NBYTES, sizeof(*buf)),
+		      GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto nomem;
+	}
+
+	while (addr_len--) {
+		writel(RK3328_AUTO_RD | RK3328_AUTO_ENB |
+		       ((addr_start++ & RK3399_A_MASK) << RK3399_A_SHIFT),
+		       efuse->base + RK3328_AUTO_CTRL);
+		udelay(4);
+		status = readl(efuse->base + RK3328_INT_STATUS);
+		if (!(status & RK3328_INT_FINISH)) {
+			ret = -EIO;
+			goto err;
+		}
+		out_value = readl(efuse->base + RK3328_DOUT);
+		writel(RK3328_INT_FINISH, efuse->base + RK3328_INT_STATUS);
+
+		memcpy(&buf[i], &out_value, RK3399_NBYTES);
+		i += RK3399_NBYTES;
+	}
+
+	memcpy(val, buf + addr_offset, bytes);
+err:
+	kfree(buf);
+nomem:
+	clk_disable_unprepare(efuse->clk);
+
+	return ret;
+}
+
+static int rockchip_rk3399_efuse_read(void *context, unsigned int offset,
+				      void *val, size_t bytes)
+{
+	struct rockchip_efuse_chip *efuse = context;
+	unsigned int addr_start, addr_end, addr_offset, addr_len;
+	u32 out_value;
+	u8 *buf;
+	int ret, i = 0;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret < 0) {
+		dev_err(efuse->dev, "failed to prepare/enable efuse clk\n");
+		return ret;
+	}
+
+	addr_start = rounddown(offset, RK3399_NBYTES) / RK3399_NBYTES;
+	addr_end = roundup(offset + bytes, RK3399_NBYTES) / RK3399_NBYTES;
+	addr_offset = offset % RK3399_NBYTES;
+	addr_len = addr_end - addr_start;
+
+	buf = kzalloc(array3_size(addr_len, RK3399_NBYTES, sizeof(*buf)),
+		      GFP_KERNEL);
+	if (!buf) {
+		clk_disable_unprepare(efuse->clk);
+		return -ENOMEM;
+	}
+
+	writel(RK3399_LOAD | RK3399_PGENB | RK3399_STROBSFTSEL | RK3399_RSB,
+	       efuse->base + REG_EFUSE_CTRL);
+	udelay(1);
+	while (addr_len--) {
+		writel(readl(efuse->base + REG_EFUSE_CTRL) | RK3399_STROBE |
+		       ((addr_start++ & RK3399_A_MASK) << RK3399_A_SHIFT),
+		       efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+		out_value = readl(efuse->base + REG_EFUSE_DOUT);
+		writel(readl(efuse->base + REG_EFUSE_CTRL) & (~RK3399_STROBE),
+		       efuse->base + REG_EFUSE_CTRL);
+		udelay(1);
+
+		memcpy(&buf[i], &out_value, RK3399_NBYTES);
+		i += RK3399_NBYTES;
+	}
+
+	/* Switch to standby mode */
+	writel(RK3399_PD | RK3399_CSB, efuse->base + REG_EFUSE_CTRL);
+
+	memcpy(val, buf + addr_offset, bytes);
+
+	kfree(buf);
+
+	clk_disable_unprepare(efuse->clk);
+
+	return 0;
+}
+
+static struct nvmem_config econfig = {
+	.name = "rockchip-efuse",
+	.stride = 1,
+	.word_size = 1,
+	.read_only = true,
+};
+
+static const struct of_device_id rockchip_efuse_match[] = {
+	/* deprecated but kept around for dts binding compatibility */
+	{
+		.compatible = "rockchip,rockchip-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3066a-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3188-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3228-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3288-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3368-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3328-efuse",
+		.data = (void *)&rockchip_rk3328_efuse_read,
+	},
+	{
+		.compatible = "rockchip,rk3399-efuse",
+		.data = (void *)&rockchip_rk3399_efuse_read,
+	},
+	{ /* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, rockchip_efuse_match);
+
+static int rockchip_efuse_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct rockchip_efuse_chip *efuse;
+	const void *data;
+	struct device *dev = &pdev->dev;
+
+	data = of_device_get_match_data(dev);
+	if (!data) {
+		dev_err(dev, "failed to get match data\n");
+		return -EINVAL;
+	}
+
+	efuse = devm_kzalloc(dev, sizeof(struct rockchip_efuse_chip),
+			     GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	efuse->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
+
+	efuse->clk = devm_clk_get(dev, "pclk_efuse");
+	if (IS_ERR(efuse->clk))
+		return PTR_ERR(efuse->clk);
+
+	efuse->dev = dev;
+	if (of_property_read_u32(dev->of_node, "rockchip,efuse-size",
+				 &econfig.size))
+		econfig.size = resource_size(res);
+	econfig.reg_read = data;
+	econfig.priv = efuse;
+	econfig.dev = efuse->dev;
+	nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver rockchip_efuse_driver = {
+	.probe = rockchip_efuse_probe,
+	.driver = {
+		.name = "rockchip-efuse",
+		.of_match_table = rockchip_efuse_match,
+	},
+};
+
+module_platform_driver(rockchip_efuse_driver);
+MODULE_DESCRIPTION("rockchip_efuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/rockchip-otp.c b/drivers/nvmem/rockchip-otp.c
new file mode 100644
index 000000000..9f53bcce2
--- /dev/null
+++ b/drivers/nvmem/rockchip-otp.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Rockchip OTP Driver
+ *
+ * Copyright (c) 2018 Rockchip Electronics Co. Ltd.
+ * Author: Finley Xiao <finley.xiao@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+/* OTP Register Offsets */
+#define OTPC_SBPI_CTRL			0x0020
+#define OTPC_SBPI_CMD_VALID_PRE		0x0024
+#define OTPC_SBPI_CS_VALID_PRE		0x0028
+#define OTPC_SBPI_STATUS		0x002C
+#define OTPC_USER_CTRL			0x0100
+#define OTPC_USER_ADDR			0x0104
+#define OTPC_USER_ENABLE		0x0108
+#define OTPC_USER_Q			0x0124
+#define OTPC_INT_STATUS			0x0304
+#define OTPC_SBPI_CMD0_OFFSET		0x1000
+#define OTPC_SBPI_CMD1_OFFSET		0x1004
+
+/* OTP Register bits and masks */
+#define OTPC_USER_ADDR_MASK		GENMASK(31, 16)
+#define OTPC_USE_USER			BIT(0)
+#define OTPC_USE_USER_MASK		GENMASK(16, 16)
+#define OTPC_USER_FSM_ENABLE		BIT(0)
+#define OTPC_USER_FSM_ENABLE_MASK	GENMASK(16, 16)
+#define OTPC_SBPI_DONE			BIT(1)
+#define OTPC_USER_DONE			BIT(2)
+
+#define SBPI_DAP_ADDR			0x02
+#define SBPI_DAP_ADDR_SHIFT		8
+#define SBPI_DAP_ADDR_MASK		GENMASK(31, 24)
+#define SBPI_CMD_VALID_MASK		GENMASK(31, 16)
+#define SBPI_DAP_CMD_WRF		0xC0
+#define SBPI_DAP_REG_ECC		0x3A
+#define SBPI_ECC_ENABLE			0x00
+#define SBPI_ECC_DISABLE		0x09
+#define SBPI_ENABLE			BIT(0)
+#define SBPI_ENABLE_MASK		GENMASK(16, 16)
+
+#define OTPC_TIMEOUT			10000
+
+struct rockchip_otp {
+	struct device *dev;
+	void __iomem *base;
+	struct clk_bulk_data	*clks;
+	int num_clks;
+	struct reset_control *rst;
+};
+
+/* list of required clocks */
+static const char * const rockchip_otp_clocks[] = {
+	"otp", "apb_pclk", "phy",
+};
+
+struct rockchip_data {
+	int size;
+};
+
+static int rockchip_otp_reset(struct rockchip_otp *otp)
+{
+	int ret;
+
+	ret = reset_control_assert(otp->rst);
+	if (ret) {
+		dev_err(otp->dev, "failed to assert otp phy %d\n", ret);
+		return ret;
+	}
+
+	udelay(2);
+
+	ret = reset_control_deassert(otp->rst);
+	if (ret) {
+		dev_err(otp->dev, "failed to deassert otp phy %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_otp_wait_status(struct rockchip_otp *otp, u32 flag)
+{
+	u32 status = 0;
+	int ret;
+
+	ret = readl_poll_timeout_atomic(otp->base + OTPC_INT_STATUS, status,
+					(status & flag), 1, OTPC_TIMEOUT);
+	if (ret)
+		return ret;
+
+	/* clean int status */
+	writel(flag, otp->base + OTPC_INT_STATUS);
+
+	return 0;
+}
+
+static int rockchip_otp_ecc_enable(struct rockchip_otp *otp, bool enable)
+{
+	int ret = 0;
+
+	writel(SBPI_DAP_ADDR_MASK | (SBPI_DAP_ADDR << SBPI_DAP_ADDR_SHIFT),
+	       otp->base + OTPC_SBPI_CTRL);
+
+	writel(SBPI_CMD_VALID_MASK | 0x1, otp->base + OTPC_SBPI_CMD_VALID_PRE);
+	writel(SBPI_DAP_CMD_WRF | SBPI_DAP_REG_ECC,
+	       otp->base + OTPC_SBPI_CMD0_OFFSET);
+	if (enable)
+		writel(SBPI_ECC_ENABLE, otp->base + OTPC_SBPI_CMD1_OFFSET);
+	else
+		writel(SBPI_ECC_DISABLE, otp->base + OTPC_SBPI_CMD1_OFFSET);
+
+	writel(SBPI_ENABLE_MASK | SBPI_ENABLE, otp->base + OTPC_SBPI_CTRL);
+
+	ret = rockchip_otp_wait_status(otp, OTPC_SBPI_DONE);
+	if (ret < 0)
+		dev_err(otp->dev, "timeout during ecc_enable\n");
+
+	return ret;
+}
+
+static int rockchip_otp_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct rockchip_otp *otp = context;
+	u8 *buf = val;
+	int ret = 0;
+
+	ret = clk_bulk_prepare_enable(otp->num_clks, otp->clks);
+	if (ret < 0) {
+		dev_err(otp->dev, "failed to prepare/enable clks\n");
+		return ret;
+	}
+
+	ret = rockchip_otp_reset(otp);
+	if (ret) {
+		dev_err(otp->dev, "failed to reset otp phy\n");
+		goto disable_clks;
+	}
+
+	ret = rockchip_otp_ecc_enable(otp, false);
+	if (ret < 0) {
+		dev_err(otp->dev, "rockchip_otp_ecc_enable err\n");
+		goto disable_clks;
+	}
+
+	writel(OTPC_USE_USER | OTPC_USE_USER_MASK, otp->base + OTPC_USER_CTRL);
+	udelay(5);
+	while (bytes--) {
+		writel(offset++ | OTPC_USER_ADDR_MASK,
+		       otp->base + OTPC_USER_ADDR);
+		writel(OTPC_USER_FSM_ENABLE | OTPC_USER_FSM_ENABLE_MASK,
+		       otp->base + OTPC_USER_ENABLE);
+		ret = rockchip_otp_wait_status(otp, OTPC_USER_DONE);
+		if (ret < 0) {
+			dev_err(otp->dev, "timeout during read setup\n");
+			goto read_end;
+		}
+		*buf++ = readb(otp->base + OTPC_USER_Q);
+	}
+
+read_end:
+	writel(0x0 | OTPC_USE_USER_MASK, otp->base + OTPC_USER_CTRL);
+disable_clks:
+	clk_bulk_disable_unprepare(otp->num_clks, otp->clks);
+
+	return ret;
+}
+
+static struct nvmem_config otp_config = {
+	.name = "rockchip-otp",
+	.owner = THIS_MODULE,
+	.read_only = true,
+	.stride = 1,
+	.word_size = 1,
+	.reg_read = rockchip_otp_read,
+};
+
+static const struct rockchip_data px30_data = {
+	.size = 0x40,
+};
+
+static const struct of_device_id rockchip_otp_match[] = {
+	{
+		.compatible = "rockchip,px30-otp",
+		.data = (void *)&px30_data,
+	},
+	{
+		.compatible = "rockchip,rk3308-otp",
+		.data = (void *)&px30_data,
+	},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, rockchip_otp_match);
+
+static int rockchip_otp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_otp *otp;
+	const struct rockchip_data *data;
+	struct nvmem_device *nvmem;
+	int ret, i;
+
+	data = of_device_get_match_data(dev);
+	if (!data) {
+		dev_err(dev, "failed to get match data\n");
+		return -EINVAL;
+	}
+
+	otp = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_otp),
+			   GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	otp->dev = dev;
+	otp->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(otp->base))
+		return PTR_ERR(otp->base);
+
+	otp->num_clks = ARRAY_SIZE(rockchip_otp_clocks);
+	otp->clks = devm_kcalloc(dev, otp->num_clks,
+				     sizeof(*otp->clks), GFP_KERNEL);
+	if (!otp->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < otp->num_clks; ++i)
+		otp->clks[i].id = rockchip_otp_clocks[i];
+
+	ret = devm_clk_bulk_get(dev, otp->num_clks, otp->clks);
+	if (ret)
+		return ret;
+
+	otp->rst = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(otp->rst))
+		return PTR_ERR(otp->rst);
+
+	otp_config.size = data->size;
+	otp_config.priv = otp;
+	otp_config.dev = dev;
+	nvmem = devm_nvmem_register(dev, &otp_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static struct platform_driver rockchip_otp_driver = {
+	.probe = rockchip_otp_probe,
+	.driver = {
+		.name = "rockchip-otp",
+		.of_match_table = rockchip_otp_match,
+	},
+};
+
+module_platform_driver(rockchip_otp_driver);
+MODULE_DESCRIPTION("Rockchip OTP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/sc27xx-efuse.c b/drivers/nvmem/sc27xx-efuse.c
new file mode 100644
index 000000000..c825fc902
--- /dev/null
+++ b/drivers/nvmem/sc27xx-efuse.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Spreadtrum Communications Inc.
+
+#include <linux/hwspinlock.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/nvmem-provider.h>
+
+/* PMIC global registers definition */
+#define SC27XX_MODULE_EN		0xc08
+#define SC2730_MODULE_EN		0x1808
+#define SC27XX_EFUSE_EN			BIT(6)
+
+/* Efuse controller registers definition */
+#define SC27XX_EFUSE_GLB_CTRL		0x0
+#define SC27XX_EFUSE_DATA_RD		0x4
+#define SC27XX_EFUSE_DATA_WR		0x8
+#define SC27XX_EFUSE_BLOCK_INDEX	0xc
+#define SC27XX_EFUSE_MODE_CTRL		0x10
+#define SC27XX_EFUSE_STATUS		0x14
+#define SC27XX_EFUSE_WR_TIMING_CTRL	0x20
+#define SC27XX_EFUSE_RD_TIMING_CTRL	0x24
+#define SC27XX_EFUSE_EFUSE_DEB_CTRL	0x28
+
+/* Mask definition for SC27XX_EFUSE_BLOCK_INDEX register */
+#define SC27XX_EFUSE_BLOCK_MASK		GENMASK(4, 0)
+
+/* Bits definitions for SC27XX_EFUSE_MODE_CTRL register */
+#define SC27XX_EFUSE_PG_START		BIT(0)
+#define SC27XX_EFUSE_RD_START		BIT(1)
+#define SC27XX_EFUSE_CLR_RDDONE		BIT(2)
+
+/* Bits definitions for SC27XX_EFUSE_STATUS register */
+#define SC27XX_EFUSE_PGM_BUSY		BIT(0)
+#define SC27XX_EFUSE_READ_BUSY		BIT(1)
+#define SC27XX_EFUSE_STANDBY		BIT(2)
+#define SC27XX_EFUSE_GLOBAL_PROT	BIT(3)
+#define SC27XX_EFUSE_RD_DONE		BIT(4)
+
+/* Block number and block width (bytes) definitions */
+#define SC27XX_EFUSE_BLOCK_MAX		32
+#define SC27XX_EFUSE_BLOCK_WIDTH	2
+
+/* Timeout (ms) for the trylock of hardware spinlocks */
+#define SC27XX_EFUSE_HWLOCK_TIMEOUT	5000
+
+/* Timeout (us) of polling the status */
+#define SC27XX_EFUSE_POLL_TIMEOUT	3000000
+#define SC27XX_EFUSE_POLL_DELAY_US	10000
+
+/*
+ * Since different PMICs of SC27xx series can have different
+ * address , we should save address in the device data structure.
+ */
+struct sc27xx_efuse_variant_data {
+	u32 module_en;
+};
+
+struct sc27xx_efuse {
+	struct device *dev;
+	struct regmap *regmap;
+	struct hwspinlock *hwlock;
+	struct mutex mutex;
+	u32 base;
+	const struct sc27xx_efuse_variant_data *var_data;
+};
+
+static const struct sc27xx_efuse_variant_data sc2731_edata = {
+	.module_en = SC27XX_MODULE_EN,
+};
+
+static const struct sc27xx_efuse_variant_data sc2730_edata = {
+	.module_en = SC2730_MODULE_EN,
+};
+
+/*
+ * On Spreadtrum platform, we have multi-subsystems will access the unique
+ * efuse controller, so we need one hardware spinlock to synchronize between
+ * the multiple subsystems.
+ */
+static int sc27xx_efuse_lock(struct sc27xx_efuse *efuse)
+{
+	int ret;
+
+	mutex_lock(&efuse->mutex);
+
+	ret = hwspin_lock_timeout_raw(efuse->hwlock,
+				      SC27XX_EFUSE_HWLOCK_TIMEOUT);
+	if (ret) {
+		dev_err(efuse->dev, "timeout to get the hwspinlock\n");
+		mutex_unlock(&efuse->mutex);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void sc27xx_efuse_unlock(struct sc27xx_efuse *efuse)
+{
+	hwspin_unlock_raw(efuse->hwlock);
+	mutex_unlock(&efuse->mutex);
+}
+
+static int sc27xx_efuse_poll_status(struct sc27xx_efuse *efuse, u32 bits)
+{
+	int ret;
+	u32 val;
+
+	ret = regmap_read_poll_timeout(efuse->regmap,
+				       efuse->base + SC27XX_EFUSE_STATUS,
+				       val, (val & bits),
+				       SC27XX_EFUSE_POLL_DELAY_US,
+				       SC27XX_EFUSE_POLL_TIMEOUT);
+	if (ret) {
+		dev_err(efuse->dev, "timeout to update the efuse status\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
+{
+	struct sc27xx_efuse *efuse = context;
+	u32 buf, blk_index = offset / SC27XX_EFUSE_BLOCK_WIDTH;
+	u32 blk_offset = (offset % SC27XX_EFUSE_BLOCK_WIDTH) * BITS_PER_BYTE;
+	int ret;
+
+	if (blk_index > SC27XX_EFUSE_BLOCK_MAX ||
+	    bytes > SC27XX_EFUSE_BLOCK_WIDTH)
+		return -EINVAL;
+
+	ret = sc27xx_efuse_lock(efuse);
+	if (ret)
+		return ret;
+
+	/* Enable the efuse controller. */
+	ret = regmap_update_bits(efuse->regmap, efuse->var_data->module_en,
+				 SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
+	if (ret)
+		goto unlock_efuse;
+
+	/*
+	 * Before reading, we should ensure the efuse controller is in
+	 * standby state.
+	 */
+	ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_STANDBY);
+	if (ret)
+		goto disable_efuse;
+
+	/* Set the block address to be read. */
+	ret = regmap_write(efuse->regmap,
+			   efuse->base + SC27XX_EFUSE_BLOCK_INDEX,
+			   blk_index & SC27XX_EFUSE_BLOCK_MASK);
+	if (ret)
+		goto disable_efuse;
+
+	/* Start reading process from efuse memory. */
+	ret = regmap_update_bits(efuse->regmap,
+				 efuse->base + SC27XX_EFUSE_MODE_CTRL,
+				 SC27XX_EFUSE_RD_START,
+				 SC27XX_EFUSE_RD_START);
+	if (ret)
+		goto disable_efuse;
+
+	/*
+	 * Polling the read done status to make sure the reading process
+	 * is completed, that means the data can be read out now.
+	 */
+	ret = sc27xx_efuse_poll_status(efuse, SC27XX_EFUSE_RD_DONE);
+	if (ret)
+		goto disable_efuse;
+
+	/* Read data from efuse memory. */
+	ret = regmap_read(efuse->regmap, efuse->base + SC27XX_EFUSE_DATA_RD,
+			  &buf);
+	if (ret)
+		goto disable_efuse;
+
+	/* Clear the read done flag. */
+	ret = regmap_update_bits(efuse->regmap,
+				 efuse->base + SC27XX_EFUSE_MODE_CTRL,
+				 SC27XX_EFUSE_CLR_RDDONE,
+				 SC27XX_EFUSE_CLR_RDDONE);
+
+disable_efuse:
+	/* Disable the efuse controller after reading. */
+	regmap_update_bits(efuse->regmap, efuse->var_data->module_en, SC27XX_EFUSE_EN, 0);
+unlock_efuse:
+	sc27xx_efuse_unlock(efuse);
+
+	if (!ret) {
+		buf >>= blk_offset;
+		memcpy(val, &buf, bytes);
+	}
+
+	return ret;
+}
+
+static int sc27xx_efuse_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct nvmem_config econfig = { };
+	struct nvmem_device *nvmem;
+	struct sc27xx_efuse *efuse;
+	int ret;
+
+	efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	efuse->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!efuse->regmap) {
+		dev_err(&pdev->dev, "failed to get efuse regmap\n");
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(np, "reg", &efuse->base);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to get efuse base address\n");
+		return ret;
+	}
+
+	ret = of_hwspin_lock_get_id(np, 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get hwspinlock id\n");
+		return ret;
+	}
+
+	efuse->hwlock = devm_hwspin_lock_request_specific(&pdev->dev, ret);
+	if (!efuse->hwlock) {
+		dev_err(&pdev->dev, "failed to request hwspinlock\n");
+		return -ENXIO;
+	}
+
+	mutex_init(&efuse->mutex);
+	efuse->dev = &pdev->dev;
+	efuse->var_data = of_device_get_match_data(&pdev->dev);
+
+	econfig.stride = 1;
+	econfig.word_size = 1;
+	econfig.read_only = true;
+	econfig.name = "sc27xx-efuse";
+	econfig.size = SC27XX_EFUSE_BLOCK_MAX * SC27XX_EFUSE_BLOCK_WIDTH;
+	econfig.reg_read = sc27xx_efuse_read;
+	econfig.priv = efuse;
+	econfig.dev = &pdev->dev;
+	nvmem = devm_nvmem_register(&pdev->dev, &econfig);
+	if (IS_ERR(nvmem)) {
+		dev_err(&pdev->dev, "failed to register nvmem config\n");
+		return PTR_ERR(nvmem);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sc27xx_efuse_of_match[] = {
+	{ .compatible = "sprd,sc2731-efuse", .data = &sc2731_edata},
+	{ .compatible = "sprd,sc2730-efuse", .data = &sc2730_edata},
+	{ }
+};
+
+static struct platform_driver sc27xx_efuse_driver = {
+	.probe = sc27xx_efuse_probe,
+	.driver = {
+		.name = "sc27xx-efuse",
+		.of_match_table = sc27xx_efuse_of_match,
+	},
+};
+
+module_platform_driver(sc27xx_efuse_driver);
+
+MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
+MODULE_DESCRIPTION("Spreadtrum SC27xx efuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/snvs_lpgpr.c b/drivers/nvmem/snvs_lpgpr.c
new file mode 100644
index 000000000..4692aa985
--- /dev/null
+++ b/drivers/nvmem/snvs_lpgpr.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
+ * Copyright (c) 2017 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define IMX6Q_SNVS_HPLR		0x00
+#define IMX6Q_SNVS_LPLR		0x34
+#define IMX6Q_SNVS_LPGPR	0x68
+
+#define IMX7D_SNVS_HPLR		0x00
+#define IMX7D_SNVS_LPLR		0x34
+#define IMX7D_SNVS_LPGPR	0x90
+
+#define IMX_GPR_SL		BIT(5)
+#define IMX_GPR_HL		BIT(5)
+
+struct snvs_lpgpr_cfg {
+	int offset;
+	int offset_hplr;
+	int offset_lplr;
+	int size;
+};
+
+struct snvs_lpgpr_priv {
+	struct device_d			*dev;
+	struct regmap			*regmap;
+	struct nvmem_config		cfg;
+	const struct snvs_lpgpr_cfg	*dcfg;
+};
+
+static const struct snvs_lpgpr_cfg snvs_lpgpr_cfg_imx6q = {
+	.offset		= IMX6Q_SNVS_LPGPR,
+	.offset_hplr	= IMX6Q_SNVS_HPLR,
+	.offset_lplr	= IMX6Q_SNVS_LPLR,
+	.size		= 4,
+};
+
+static const struct snvs_lpgpr_cfg snvs_lpgpr_cfg_imx7d = {
+	.offset		= IMX7D_SNVS_LPGPR,
+	.offset_hplr	= IMX7D_SNVS_HPLR,
+	.offset_lplr	= IMX7D_SNVS_LPLR,
+	.size		= 16,
+};
+
+static int snvs_lpgpr_write(void *context, unsigned int offset, void *val,
+			    size_t bytes)
+{
+	struct snvs_lpgpr_priv *priv = context;
+	const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+	unsigned int lock_reg;
+	int ret;
+
+	ret = regmap_read(priv->regmap, dcfg->offset_hplr, &lock_reg);
+	if (ret < 0)
+		return ret;
+
+	if (lock_reg & IMX_GPR_SL)
+		return -EPERM;
+
+	ret = regmap_read(priv->regmap, dcfg->offset_lplr, &lock_reg);
+	if (ret < 0)
+		return ret;
+
+	if (lock_reg & IMX_GPR_HL)
+		return -EPERM;
+
+	return regmap_bulk_write(priv->regmap, dcfg->offset + offset, val,
+				bytes / 4);
+}
+
+static int snvs_lpgpr_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct snvs_lpgpr_priv *priv = context;
+	const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+
+	return regmap_bulk_read(priv->regmap, dcfg->offset + offset,
+			       val, bytes / 4);
+}
+
+static int snvs_lpgpr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct device_node *syscon_node;
+	struct snvs_lpgpr_priv *priv;
+	struct nvmem_config *cfg;
+	struct nvmem_device *nvmem;
+	const struct snvs_lpgpr_cfg *dcfg;
+
+	if (!node)
+		return -ENOENT;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dcfg = of_device_get_match_data(dev);
+	if (!dcfg)
+		return -EINVAL;
+
+	syscon_node = of_get_parent(node);
+	if (!syscon_node)
+		return -ENODEV;
+
+	priv->regmap = syscon_node_to_regmap(syscon_node);
+	of_node_put(syscon_node);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->dcfg = dcfg;
+
+	cfg = &priv->cfg;
+	cfg->priv = priv;
+	cfg->name = dev_name(dev);
+	cfg->dev = dev;
+	cfg->stride = 4;
+	cfg->word_size = 4;
+	cfg->size = dcfg->size;
+	cfg->owner = THIS_MODULE;
+	cfg->reg_read  = snvs_lpgpr_read;
+	cfg->reg_write = snvs_lpgpr_write;
+
+	nvmem = devm_nvmem_register(dev, cfg);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id snvs_lpgpr_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-snvs-lpgpr", .data = &snvs_lpgpr_cfg_imx6q },
+	{ .compatible = "fsl,imx6ul-snvs-lpgpr",
+	  .data = &snvs_lpgpr_cfg_imx6q },
+	{ .compatible = "fsl,imx7d-snvs-lpgpr",	.data = &snvs_lpgpr_cfg_imx7d },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, snvs_lpgpr_dt_ids);
+
+static struct platform_driver snvs_lpgpr_driver = {
+	.probe	= snvs_lpgpr_probe,
+	.driver = {
+		.name	= "snvs_lpgpr",
+		.of_match_table = snvs_lpgpr_dt_ids,
+	},
+};
+module_platform_driver(snvs_lpgpr_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <o.rempel@pengutronix.de>");
+MODULE_DESCRIPTION("Low Power General Purpose Register in i.MX6 and i.MX7 Secure Non-Volatile Storage");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/sprd-efuse.c b/drivers/nvmem/sprd-efuse.c
new file mode 100644
index 000000000..4f1fcbfec
--- /dev/null
+++ b/drivers/nvmem/sprd-efuse.c
@@ -0,0 +1,441 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2019 Spreadtrum Communications Inc.
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/hwspinlock.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#define SPRD_EFUSE_ENABLE		0x20
+#define SPRD_EFUSE_ERR_FLAG		0x24
+#define SPRD_EFUSE_ERR_CLR		0x28
+#define SPRD_EFUSE_MAGIC_NUM		0x2c
+#define SPRD_EFUSE_FW_CFG		0x50
+#define SPRD_EFUSE_PW_SWT		0x54
+#define SPRD_EFUSE_MEM(val)		(0x1000 + ((val) << 2))
+
+#define SPRD_EFUSE_VDD_EN		BIT(0)
+#define SPRD_EFUSE_AUTO_CHECK_EN	BIT(1)
+#define SPRD_EFUSE_DOUBLE_EN		BIT(2)
+#define SPRD_EFUSE_MARGIN_RD_EN		BIT(3)
+#define SPRD_EFUSE_LOCK_WR_EN		BIT(4)
+
+#define SPRD_EFUSE_ERR_CLR_MASK		GENMASK(13, 0)
+
+#define SPRD_EFUSE_ENK1_ON		BIT(0)
+#define SPRD_EFUSE_ENK2_ON		BIT(1)
+#define SPRD_EFUSE_PROG_EN		BIT(2)
+
+#define SPRD_EFUSE_MAGIC_NUMBER		0x8810
+
+/* Block width (bytes) definitions */
+#define SPRD_EFUSE_BLOCK_WIDTH		4
+
+/*
+ * The Spreadtrum AP efuse contains 2 parts: normal efuse and secure efuse,
+ * and we can only access the normal efuse in kernel. So define the normal
+ * block offset index and normal block numbers.
+ */
+#define SPRD_EFUSE_NORMAL_BLOCK_NUMS	24
+#define SPRD_EFUSE_NORMAL_BLOCK_OFFSET	72
+
+/* Timeout (ms) for the trylock of hardware spinlocks */
+#define SPRD_EFUSE_HWLOCK_TIMEOUT	5000
+
+/*
+ * Since different Spreadtrum SoC chip can have different normal block numbers
+ * and offset. And some SoC can support block double feature, which means
+ * when reading or writing data to efuse memory, the controller can save double
+ * data in case one data become incorrect after a long period.
+ *
+ * Thus we should save them in the device data structure.
+ */
+struct sprd_efuse_variant_data {
+	u32 blk_nums;
+	u32 blk_offset;
+	bool blk_double;
+};
+
+struct sprd_efuse {
+	struct device *dev;
+	struct clk *clk;
+	struct hwspinlock *hwlock;
+	struct mutex mutex;
+	void __iomem *base;
+	const struct sprd_efuse_variant_data *data;
+};
+
+static const struct sprd_efuse_variant_data ums312_data = {
+	.blk_nums = SPRD_EFUSE_NORMAL_BLOCK_NUMS,
+	.blk_offset = SPRD_EFUSE_NORMAL_BLOCK_OFFSET,
+	.blk_double = false,
+};
+
+/*
+ * On Spreadtrum platform, we have multi-subsystems will access the unique
+ * efuse controller, so we need one hardware spinlock to synchronize between
+ * the multiple subsystems.
+ */
+static int sprd_efuse_lock(struct sprd_efuse *efuse)
+{
+	int ret;
+
+	mutex_lock(&efuse->mutex);
+
+	ret = hwspin_lock_timeout_raw(efuse->hwlock,
+				      SPRD_EFUSE_HWLOCK_TIMEOUT);
+	if (ret) {
+		dev_err(efuse->dev, "timeout get the hwspinlock\n");
+		mutex_unlock(&efuse->mutex);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void sprd_efuse_unlock(struct sprd_efuse *efuse)
+{
+	hwspin_unlock_raw(efuse->hwlock);
+	mutex_unlock(&efuse->mutex);
+}
+
+static void sprd_efuse_set_prog_power(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_PW_SWT);
+
+	if (en)
+		val &= ~SPRD_EFUSE_ENK2_ON;
+	else
+		val &= ~SPRD_EFUSE_ENK1_ON;
+
+	writel(val, efuse->base + SPRD_EFUSE_PW_SWT);
+
+	/* Open or close efuse power need wait 1000us to make power stable. */
+	usleep_range(1000, 1200);
+
+	if (en)
+		val |= SPRD_EFUSE_ENK1_ON;
+	else
+		val |= SPRD_EFUSE_ENK2_ON;
+
+	writel(val, efuse->base + SPRD_EFUSE_PW_SWT);
+
+	/* Open or close efuse power need wait 1000us to make power stable. */
+	usleep_range(1000, 1200);
+}
+
+static void sprd_efuse_set_read_power(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_ENABLE);
+
+	if (en)
+		val |= SPRD_EFUSE_VDD_EN;
+	else
+		val &= ~SPRD_EFUSE_VDD_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_ENABLE);
+
+	/* Open or close efuse power need wait 1000us to make power stable. */
+	usleep_range(1000, 1200);
+}
+
+static void sprd_efuse_set_prog_lock(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_ENABLE);
+
+	if (en)
+		val |= SPRD_EFUSE_LOCK_WR_EN;
+	else
+		val &= ~SPRD_EFUSE_LOCK_WR_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_ENABLE);
+}
+
+static void sprd_efuse_set_auto_check(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_ENABLE);
+
+	if (en)
+		val |= SPRD_EFUSE_AUTO_CHECK_EN;
+	else
+		val &= ~SPRD_EFUSE_AUTO_CHECK_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_ENABLE);
+}
+
+static void sprd_efuse_set_data_double(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_ENABLE);
+
+	if (en)
+		val |= SPRD_EFUSE_DOUBLE_EN;
+	else
+		val &= ~SPRD_EFUSE_DOUBLE_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_ENABLE);
+}
+
+static void sprd_efuse_set_prog_en(struct sprd_efuse *efuse, bool en)
+{
+	u32 val = readl(efuse->base + SPRD_EFUSE_PW_SWT);
+
+	if (en)
+		val |= SPRD_EFUSE_PROG_EN;
+	else
+		val &= ~SPRD_EFUSE_PROG_EN;
+
+	writel(val, efuse->base + SPRD_EFUSE_PW_SWT);
+}
+
+static int sprd_efuse_raw_prog(struct sprd_efuse *efuse, u32 blk, bool doub,
+			       bool lock, u32 *data)
+{
+	u32 status;
+	int ret = 0;
+
+	/*
+	 * We need set the correct magic number before writing the efuse to
+	 * allow programming, and block other programming until we clear the
+	 * magic number.
+	 */
+	writel(SPRD_EFUSE_MAGIC_NUMBER,
+	       efuse->base + SPRD_EFUSE_MAGIC_NUM);
+
+	/*
+	 * Power on the efuse, enable programme and enable double data
+	 * if asked.
+	 */
+	sprd_efuse_set_prog_power(efuse, true);
+	sprd_efuse_set_prog_en(efuse, true);
+	sprd_efuse_set_data_double(efuse, doub);
+
+	/*
+	 * Enable the auto-check function to validate if the programming is
+	 * successful.
+	 */
+	if (lock)
+		sprd_efuse_set_auto_check(efuse, true);
+
+	writel(*data, efuse->base + SPRD_EFUSE_MEM(blk));
+
+	/* Disable auto-check and data double after programming */
+	if (lock)
+		sprd_efuse_set_auto_check(efuse, false);
+	sprd_efuse_set_data_double(efuse, false);
+
+	/*
+	 * Check the efuse error status, if the programming is successful,
+	 * we should lock this efuse block to avoid programming again.
+	 */
+	status = readl(efuse->base + SPRD_EFUSE_ERR_FLAG);
+	if (status) {
+		dev_err(efuse->dev,
+			"write error status %u of block %d\n", status, blk);
+
+		writel(SPRD_EFUSE_ERR_CLR_MASK,
+		       efuse->base + SPRD_EFUSE_ERR_CLR);
+		ret = -EBUSY;
+	} else if (lock) {
+		sprd_efuse_set_prog_lock(efuse, lock);
+		writel(0, efuse->base + SPRD_EFUSE_MEM(blk));
+		sprd_efuse_set_prog_lock(efuse, false);
+	}
+
+	sprd_efuse_set_prog_power(efuse, false);
+	writel(0, efuse->base + SPRD_EFUSE_MAGIC_NUM);
+
+	return ret;
+}
+
+static int sprd_efuse_raw_read(struct sprd_efuse *efuse, int blk, u32 *val,
+			       bool doub)
+{
+	u32 status;
+
+	/*
+	 * Need power on the efuse before reading data from efuse, and will
+	 * power off the efuse after reading process.
+	 */
+	sprd_efuse_set_read_power(efuse, true);
+
+	/* Enable double data if asked */
+	sprd_efuse_set_data_double(efuse, doub);
+
+	/* Start to read data from efuse block */
+	*val = readl(efuse->base + SPRD_EFUSE_MEM(blk));
+
+	/* Disable double data */
+	sprd_efuse_set_data_double(efuse, false);
+
+	/* Power off the efuse */
+	sprd_efuse_set_read_power(efuse, false);
+
+	/*
+	 * Check the efuse error status and clear them if there are some
+	 * errors occurred.
+	 */
+	status = readl(efuse->base + SPRD_EFUSE_ERR_FLAG);
+	if (status) {
+		dev_err(efuse->dev,
+			"read error status %d of block %d\n", status, blk);
+
+		writel(SPRD_EFUSE_ERR_CLR_MASK,
+		       efuse->base + SPRD_EFUSE_ERR_CLR);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int sprd_efuse_read(void *context, u32 offset, void *val, size_t bytes)
+{
+	struct sprd_efuse *efuse = context;
+	bool blk_double = efuse->data->blk_double;
+	u32 index = offset / SPRD_EFUSE_BLOCK_WIDTH + efuse->data->blk_offset;
+	u32 blk_offset = (offset % SPRD_EFUSE_BLOCK_WIDTH) * BITS_PER_BYTE;
+	u32 data;
+	int ret;
+
+	ret = sprd_efuse_lock(efuse);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret)
+		goto unlock;
+
+	ret = sprd_efuse_raw_read(efuse, index, &data, blk_double);
+	if (!ret) {
+		data >>= blk_offset;
+		memcpy(val, &data, bytes);
+	}
+
+	clk_disable_unprepare(efuse->clk);
+
+unlock:
+	sprd_efuse_unlock(efuse);
+	return ret;
+}
+
+static int sprd_efuse_write(void *context, u32 offset, void *val, size_t bytes)
+{
+	struct sprd_efuse *efuse = context;
+	bool blk_double = efuse->data->blk_double;
+	bool lock;
+	int ret;
+
+	ret = sprd_efuse_lock(efuse);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(efuse->clk);
+	if (ret)
+		goto unlock;
+
+	/*
+	 * If the writing bytes are equal with the block width, which means the
+	 * whole block will be programmed. For this case, we should not allow
+	 * this block to be programmed again by locking this block.
+	 *
+	 * If the block was programmed partially, we should allow this block to
+	 * be programmed again.
+	 */
+	if (bytes < SPRD_EFUSE_BLOCK_WIDTH)
+		lock = false;
+	else
+		lock = true;
+
+	ret = sprd_efuse_raw_prog(efuse, offset, blk_double, lock, val);
+
+	clk_disable_unprepare(efuse->clk);
+
+unlock:
+	sprd_efuse_unlock(efuse);
+	return ret;
+}
+
+static int sprd_efuse_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct nvmem_device *nvmem;
+	struct nvmem_config econfig = { };
+	struct sprd_efuse *efuse;
+	const struct sprd_efuse_variant_data *pdata;
+	int ret;
+
+	pdata = of_device_get_match_data(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "No matching driver data found\n");
+		return -EINVAL;
+	}
+
+	efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	efuse->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
+
+	ret = of_hwspin_lock_get_id(np, 0);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get hwlock id\n");
+		return ret;
+	}
+
+	efuse->hwlock = devm_hwspin_lock_request_specific(&pdev->dev, ret);
+	if (!efuse->hwlock) {
+		dev_err(&pdev->dev, "failed to request hwlock\n");
+		return -ENXIO;
+	}
+
+	efuse->clk = devm_clk_get(&pdev->dev, "enable");
+	if (IS_ERR(efuse->clk)) {
+		dev_err(&pdev->dev, "failed to get enable clock\n");
+		return PTR_ERR(efuse->clk);
+	}
+
+	mutex_init(&efuse->mutex);
+	efuse->dev = &pdev->dev;
+	efuse->data = pdata;
+
+	econfig.stride = 1;
+	econfig.word_size = 1;
+	econfig.read_only = false;
+	econfig.name = "sprd-efuse";
+	econfig.size = efuse->data->blk_nums * SPRD_EFUSE_BLOCK_WIDTH;
+	econfig.reg_read = sprd_efuse_read;
+	econfig.reg_write = sprd_efuse_write;
+	econfig.priv = efuse;
+	econfig.dev = &pdev->dev;
+	nvmem = devm_nvmem_register(&pdev->dev, &econfig);
+	if (IS_ERR(nvmem)) {
+		dev_err(&pdev->dev, "failed to register nvmem\n");
+		return PTR_ERR(nvmem);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sprd_efuse_of_match[] = {
+	{ .compatible = "sprd,ums312-efuse", .data = &ums312_data },
+	{ }
+};
+
+static struct platform_driver sprd_efuse_driver = {
+	.probe = sprd_efuse_probe,
+	.driver = {
+		.name = "sprd-efuse",
+		.of_match_table = sprd_efuse_of_match,
+	},
+};
+
+module_platform_driver(sprd_efuse_driver);
+
+MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
+MODULE_DESCRIPTION("Spreadtrum AP efuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/stm32-romem.c b/drivers/nvmem/stm32-romem.c
new file mode 100644
index 000000000..354be5268
--- /dev/null
+++ b/drivers/nvmem/stm32-romem.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * STM32 Factory-programmed memory read access driver
+ *
+ * Copyright (C) 2017, STMicroelectronics - All Rights Reserved
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com> for STMicroelectronics.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+
+/* BSEC secure service access from non-secure */
+#define STM32_SMC_BSEC			0x82001003
+#define STM32_SMC_READ_SHADOW		0x01
+#define STM32_SMC_PROG_OTP		0x02
+#define STM32_SMC_WRITE_SHADOW		0x03
+#define STM32_SMC_READ_OTP		0x04
+
+/* shadow registers offest */
+#define STM32MP15_BSEC_DATA0		0x200
+
+/* 32 (x 32-bits) lower shadow registers */
+#define STM32MP15_BSEC_NUM_LOWER	32
+
+struct stm32_romem_cfg {
+	int size;
+};
+
+struct stm32_romem_priv {
+	void __iomem *base;
+	struct nvmem_config cfg;
+};
+
+static int stm32_romem_read(void *context, unsigned int offset, void *buf,
+			    size_t bytes)
+{
+	struct stm32_romem_priv *priv = context;
+	u8 *buf8 = buf;
+	int i;
+
+	for (i = offset; i < offset + bytes; i++)
+		*buf8++ = readb_relaxed(priv->base + i);
+
+	return 0;
+}
+
+static int stm32_bsec_smc(u8 op, u32 otp, u32 data, u32 *result)
+{
+#if IS_ENABLED(CONFIG_HAVE_ARM_SMCCC)
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(STM32_SMC_BSEC, op, otp, data, 0, 0, 0, 0, &res);
+	if (res.a0)
+		return -EIO;
+
+	if (result)
+		*result = (u32)res.a1;
+
+	return 0;
+#else
+	return -ENXIO;
+#endif
+}
+
+static int stm32_bsec_read(void *context, unsigned int offset, void *buf,
+			   size_t bytes)
+{
+	struct stm32_romem_priv *priv = context;
+	struct device *dev = priv->cfg.dev;
+	u32 roffset, rbytes, val;
+	u8 *buf8 = buf, *val8 = (u8 *)&val;
+	int i, j = 0, ret, skip_bytes, size;
+
+	/* Round unaligned access to 32-bits */
+	roffset = rounddown(offset, 4);
+	skip_bytes = offset & 0x3;
+	rbytes = roundup(bytes + skip_bytes, 4);
+
+	if (roffset + rbytes > priv->cfg.size)
+		return -EINVAL;
+
+	for (i = roffset; (i < roffset + rbytes); i += 4) {
+		u32 otp = i >> 2;
+
+		if (otp < STM32MP15_BSEC_NUM_LOWER) {
+			/* read lower data from shadow registers */
+			val = readl_relaxed(
+				priv->base + STM32MP15_BSEC_DATA0 + i);
+		} else {
+			ret = stm32_bsec_smc(STM32_SMC_READ_SHADOW, otp, 0,
+					     &val);
+			if (ret) {
+				dev_err(dev, "Can't read data%d (%d)\n", otp,
+					ret);
+				return ret;
+			}
+		}
+		/* skip first bytes in case of unaligned read */
+		if (skip_bytes)
+			size = min(bytes, (size_t)(4 - skip_bytes));
+		else
+			size = min(bytes, (size_t)4);
+		memcpy(&buf8[j], &val8[skip_bytes], size);
+		bytes -= size;
+		j += size;
+		skip_bytes = 0;
+	}
+
+	return 0;
+}
+
+static int stm32_bsec_write(void *context, unsigned int offset, void *buf,
+			    size_t bytes)
+{
+	struct stm32_romem_priv *priv = context;
+	struct device *dev = priv->cfg.dev;
+	u32 *buf32 = buf;
+	int ret, i;
+
+	/* Allow only writing complete 32-bits aligned words */
+	if ((bytes % 4) || (offset % 4))
+		return -EINVAL;
+
+	for (i = offset; i < offset + bytes; i += 4) {
+		ret = stm32_bsec_smc(STM32_SMC_PROG_OTP, i >> 2, *buf32++,
+				     NULL);
+		if (ret) {
+			dev_err(dev, "Can't write data%d (%d)\n", i >> 2, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int stm32_romem_probe(struct platform_device *pdev)
+{
+	const struct stm32_romem_cfg *cfg;
+	struct device *dev = &pdev->dev;
+	struct stm32_romem_priv *priv;
+	struct resource *res;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->cfg.name = "stm32-romem";
+	priv->cfg.word_size = 1;
+	priv->cfg.stride = 1;
+	priv->cfg.dev = dev;
+	priv->cfg.priv = priv;
+	priv->cfg.owner = THIS_MODULE;
+
+	cfg = (const struct stm32_romem_cfg *)
+		of_match_device(dev->driver->of_match_table, dev)->data;
+	if (!cfg) {
+		priv->cfg.read_only = true;
+		priv->cfg.size = resource_size(res);
+		priv->cfg.reg_read = stm32_romem_read;
+	} else {
+		priv->cfg.size = cfg->size;
+		priv->cfg.reg_read = stm32_bsec_read;
+		priv->cfg.reg_write = stm32_bsec_write;
+	}
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg));
+}
+
+static const struct stm32_romem_cfg stm32mp15_bsec_cfg = {
+	.size = 384, /* 96 x 32-bits data words */
+};
+
+static const struct of_device_id stm32_romem_of_match[] = {
+	{ .compatible = "st,stm32f4-otp", }, {
+		.compatible = "st,stm32mp15-bsec",
+		.data = (void *)&stm32mp15_bsec_cfg,
+	}, {
+	},
+};
+MODULE_DEVICE_TABLE(of, stm32_romem_of_match);
+
+static struct platform_driver stm32_romem_driver = {
+	.probe = stm32_romem_probe,
+	.driver = {
+		.name = "stm32-romem",
+		.of_match_table = of_match_ptr(stm32_romem_of_match),
+	},
+};
+module_platform_driver(stm32_romem_driver);
+
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 RO-MEM");
+MODULE_ALIAS("platform:nvmem-stm32-romem");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/sunplus-ocotp.c b/drivers/nvmem/sunplus-ocotp.c
new file mode 100644
index 000000000..f85350b17
--- /dev/null
+++ b/drivers/nvmem/sunplus-ocotp.c
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * The OCOTP driver for Sunplus	SP7021
+ *
+ * Copyright (C) 2019 Sunplus Technology Inc., All rights reserved.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+/*
+ * OTP memory
+ * Each bank contains 4 words (32 bits).
+ * Bank 0 starts at offset 0 from the base.
+ */
+
+#define OTP_WORDS_PER_BANK		4
+#define OTP_WORD_SIZE			sizeof(u32)
+#define OTP_BIT_ADDR_OF_BANK		(8 * OTP_WORD_SIZE * OTP_WORDS_PER_BANK)
+#define QAC628_OTP_NUM_BANKS		8
+#define QAC628_OTP_SIZE			(QAC628_OTP_NUM_BANKS * OTP_WORDS_PER_BANK * OTP_WORD_SIZE)
+#define OTP_READ_TIMEOUT_US		200000
+
+/* HB_GPIO */
+#define ADDRESS_8_DATA			0x20
+
+/* OTP_RX */
+#define OTP_CONTROL_2			0x48
+#define OTP_RD_PERIOD			GENMASK(15, 8)
+#define OTP_RD_PERIOD_MASK		~GENMASK(15, 8)
+#define CPU_CLOCK			FIELD_PREP(OTP_RD_PERIOD, 30)
+#define SEL_BAK_KEY2			BIT(5)
+#define SEL_BAK_KEY2_MASK		~BIT(5)
+#define SW_TRIM_EN			BIT(4)
+#define SW_TRIM_EN_MASK			~BIT(4)
+#define SEL_BAK_KEY			BIT(3)
+#define SEL_BAK_KEY_MASK		~BIT(3)
+#define OTP_READ			BIT(2)
+#define OTP_LOAD_SECURE_DATA		BIT(1)
+#define OTP_LOAD_SECURE_DATA_MASK	~BIT(1)
+#define OTP_DO_CRC			BIT(0)
+#define OTP_DO_CRC_MASK			~BIT(0)
+#define OTP_STATUS			0x4c
+#define OTP_READ_DONE			BIT(4)
+#define OTP_READ_DONE_MASK		~BIT(4)
+#define OTP_LOAD_SECURE_DONE_MASK	~BIT(2)
+#define OTP_READ_ADDRESS		0x50
+
+enum base_type {
+	HB_GPIO,
+	OTPRX,
+	BASEMAX,
+};
+
+struct sp_ocotp_priv {
+	struct device *dev;
+	void __iomem *base[BASEMAX];
+	struct clk *clk;
+};
+
+struct sp_ocotp_data {
+	int size;
+};
+
+static const struct sp_ocotp_data sp_otp_v0 = {
+	.size = QAC628_OTP_SIZE,
+};
+
+static int sp_otp_read_real(struct sp_ocotp_priv *otp, int addr, char *value)
+{
+	unsigned int addr_data;
+	unsigned int byte_shift;
+	unsigned int status;
+	int ret;
+
+	addr_data = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
+	addr_data = addr_data / OTP_WORD_SIZE;
+
+	byte_shift = addr % (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
+	byte_shift = byte_shift % OTP_WORD_SIZE;
+
+	addr = addr / (OTP_WORD_SIZE * OTP_WORDS_PER_BANK);
+	addr = addr * OTP_BIT_ADDR_OF_BANK;
+
+	writel(readl(otp->base[OTPRX] + OTP_STATUS) & OTP_READ_DONE_MASK &
+	       OTP_LOAD_SECURE_DONE_MASK, otp->base[OTPRX] + OTP_STATUS);
+	writel(addr, otp->base[OTPRX] + OTP_READ_ADDRESS);
+	writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) | OTP_READ,
+	       otp->base[OTPRX] + OTP_CONTROL_2);
+	writel(readl(otp->base[OTPRX] + OTP_CONTROL_2) & SEL_BAK_KEY2_MASK & SW_TRIM_EN_MASK
+	       & SEL_BAK_KEY_MASK & OTP_LOAD_SECURE_DATA_MASK & OTP_DO_CRC_MASK,
+	       otp->base[OTPRX] + OTP_CONTROL_2);
+	writel((readl(otp->base[OTPRX] + OTP_CONTROL_2) & OTP_RD_PERIOD_MASK) | CPU_CLOCK,
+	       otp->base[OTPRX] + OTP_CONTROL_2);
+
+	ret = readl_poll_timeout(otp->base[OTPRX] + OTP_STATUS, status,
+				 status & OTP_READ_DONE, 10, OTP_READ_TIMEOUT_US);
+
+	if (ret < 0)
+		return ret;
+
+	*value = (readl(otp->base[HB_GPIO] + ADDRESS_8_DATA + addr_data * OTP_WORD_SIZE)
+		  >> (8 * byte_shift)) & 0xff;
+
+	return ret;
+}
+
+static int sp_ocotp_read(void *priv, unsigned int offset, void *value, size_t bytes)
+{
+	struct sp_ocotp_priv *otp = priv;
+	unsigned int addr;
+	char *buf = value;
+	char val[4];
+	int ret;
+
+	ret = clk_enable(otp->clk);
+	if (ret)
+		return ret;
+
+	*buf = 0;
+	for (addr = offset; addr < (offset + bytes); addr++) {
+		ret = sp_otp_read_real(otp, addr, val);
+		if (ret < 0) {
+			dev_err(otp->dev, "OTP read fail:%d at %d", ret, addr);
+			goto disable_clk;
+		}
+
+		*buf++ = *val;
+	}
+
+disable_clk:
+	clk_disable(otp->clk);
+
+	return ret;
+}
+
+static struct nvmem_config sp_ocotp_nvmem_config = {
+	.name = "sp-ocotp",
+	.read_only = true,
+	.word_size = 1,
+	.size = QAC628_OTP_SIZE,
+	.stride = 1,
+	.reg_read = sp_ocotp_read,
+	.owner = THIS_MODULE,
+};
+
+static int sp_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct sp_ocotp_priv *otp;
+	struct resource *res;
+	int ret;
+
+	otp = devm_kzalloc(dev, sizeof(*otp), GFP_KERNEL);
+	if (!otp)
+		return -ENOMEM;
+
+	otp->dev = dev;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hb_gpio");
+	otp->base[HB_GPIO] = devm_ioremap_resource(dev, res);
+	if (IS_ERR(otp->base[HB_GPIO]))
+		return PTR_ERR(otp->base[HB_GPIO]);
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otprx");
+	otp->base[OTPRX] = devm_ioremap_resource(dev, res);
+	if (IS_ERR(otp->base[OTPRX]))
+		return PTR_ERR(otp->base[OTPRX]);
+
+	otp->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(otp->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(otp->clk),
+						"devm_clk_get fail\n");
+
+	ret = clk_prepare(otp->clk);
+	if (ret < 0) {
+		dev_err(dev, "failed to prepare clk: %d\n", ret);
+		return ret;
+	}
+
+	sp_ocotp_nvmem_config.priv = otp;
+	sp_ocotp_nvmem_config.dev = dev;
+
+	nvmem = devm_nvmem_register(dev, &sp_ocotp_nvmem_config);
+	if (IS_ERR(nvmem)) {
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(nvmem),
+						"register nvmem device fail\n");
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, nvmem);
+
+	dev_dbg(dev, "banks:%d x wpb:%d x wsize:%d = %d",
+		(int)QAC628_OTP_NUM_BANKS, (int)OTP_WORDS_PER_BANK,
+		(int)OTP_WORD_SIZE, (int)QAC628_OTP_SIZE);
+
+	return 0;
+err:
+	clk_unprepare(otp->clk);
+	return ret;
+}
+
+static const struct of_device_id sp_ocotp_dt_ids[] = {
+	{ .compatible = "sunplus,sp7021-ocotp", .data = &sp_otp_v0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sp_ocotp_dt_ids);
+
+static struct platform_driver sp_otp_driver = {
+	.probe     = sp_ocotp_probe,
+	.driver    = {
+		.name           = "sunplus,sp7021-ocotp",
+		.of_match_table = sp_ocotp_dt_ids,
+	}
+};
+module_platform_driver(sp_otp_driver);
+
+MODULE_AUTHOR("Vincent Shih <vincent.sunplus@gmail.com>");
+MODULE_DESCRIPTION("Sunplus On-Chip OTP driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
new file mode 100644
index 000000000..92dfe4cb1
--- /dev/null
+++ b/drivers/nvmem/sunxi_sid.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Allwinner sunXi SoCs Security ID support.
+ *
+ * Copyright (c) 2013 Oliver Schinagl <oliver@schinagl.nl>
+ * Copyright (C) 2014 Maxime Ripard <maxime.ripard@free-electrons.com>
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+
+/* Registers and special values for doing register-based SID readout on H3 */
+#define SUN8I_SID_PRCTL		0x40
+#define SUN8I_SID_RDKEY		0x60
+
+#define SUN8I_SID_OFFSET_MASK	0x1FF
+#define SUN8I_SID_OFFSET_SHIFT	16
+#define SUN8I_SID_OP_LOCK	(0xAC << 8)
+#define SUN8I_SID_READ		BIT(1)
+
+struct sunxi_sid_cfg {
+	u32	value_offset;
+	u32	size;
+	bool	need_register_readout;
+};
+
+struct sunxi_sid {
+	void __iomem		*base;
+	u32			value_offset;
+};
+
+static int sunxi_sid_read(void *context, unsigned int offset,
+			  void *val, size_t bytes)
+{
+	struct sunxi_sid *sid = context;
+	u32 word;
+
+	/* .stride = 4 so offset is guaranteed to be aligned */
+	__ioread32_copy(val, sid->base + sid->value_offset + offset, bytes / 4);
+
+	val += round_down(bytes, 4);
+	offset += round_down(bytes, 4);
+	bytes = bytes % 4;
+
+	if (!bytes)
+		return 0;
+
+	/* Handle any trailing bytes */
+	word = readl_relaxed(sid->base + sid->value_offset + offset);
+	memcpy(val, &word, bytes);
+
+	return 0;
+}
+
+static int sun8i_sid_register_readout(const struct sunxi_sid *sid,
+				      const unsigned int offset,
+				      u32 *out)
+{
+	u32 reg_val;
+	int ret;
+
+	/* Set word, lock access, and set read command */
+	reg_val = (offset & SUN8I_SID_OFFSET_MASK)
+		  << SUN8I_SID_OFFSET_SHIFT;
+	reg_val |= SUN8I_SID_OP_LOCK | SUN8I_SID_READ;
+	writel(reg_val, sid->base + SUN8I_SID_PRCTL);
+
+	ret = readl_poll_timeout(sid->base + SUN8I_SID_PRCTL, reg_val,
+				 !(reg_val & SUN8I_SID_READ), 100, 250000);
+	if (ret)
+		return ret;
+
+	if (out)
+		*out = readl(sid->base + SUN8I_SID_RDKEY);
+
+	writel(0, sid->base + SUN8I_SID_PRCTL);
+
+	return 0;
+}
+
+/*
+ * On Allwinner H3, the value on the 0x200 offset of the SID controller seems
+ * to be not reliable at all.
+ * Read by the registers instead.
+ */
+static int sun8i_sid_read_by_reg(void *context, unsigned int offset,
+				 void *val, size_t bytes)
+{
+	struct sunxi_sid *sid = context;
+	u32 word;
+	int ret;
+
+	/* .stride = 4 so offset is guaranteed to be aligned */
+	while (bytes >= 4) {
+		ret = sun8i_sid_register_readout(sid, offset, val);
+		if (ret)
+			return ret;
+
+		val += 4;
+		offset += 4;
+		bytes -= 4;
+	}
+
+	if (!bytes)
+		return 0;
+
+	/* Handle any trailing bytes */
+	ret = sun8i_sid_register_readout(sid, offset, &word);
+	if (ret)
+		return ret;
+
+	memcpy(val, &word, bytes);
+
+	return 0;
+}
+
+static int sunxi_sid_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_config *nvmem_cfg;
+	struct nvmem_device *nvmem;
+	struct sunxi_sid *sid;
+	int size;
+	char *randomness;
+	const struct sunxi_sid_cfg *cfg;
+
+	sid = devm_kzalloc(dev, sizeof(*sid), GFP_KERNEL);
+	if (!sid)
+		return -ENOMEM;
+
+	cfg = of_device_get_match_data(dev);
+	if (!cfg)
+		return -EINVAL;
+	sid->value_offset = cfg->value_offset;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sid->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(sid->base))
+		return PTR_ERR(sid->base);
+
+	size = cfg->size;
+
+	nvmem_cfg = devm_kzalloc(dev, sizeof(*nvmem_cfg), GFP_KERNEL);
+	if (!nvmem_cfg)
+		return -ENOMEM;
+
+	nvmem_cfg->dev = dev;
+	nvmem_cfg->name = "sunxi-sid";
+	nvmem_cfg->type = NVMEM_TYPE_OTP;
+	nvmem_cfg->read_only = true;
+	nvmem_cfg->size = cfg->size;
+	nvmem_cfg->word_size = 1;
+	nvmem_cfg->stride = 4;
+	nvmem_cfg->priv = sid;
+	if (cfg->need_register_readout)
+		nvmem_cfg->reg_read = sun8i_sid_read_by_reg;
+	else
+		nvmem_cfg->reg_read = sunxi_sid_read;
+
+	nvmem = devm_nvmem_register(dev, nvmem_cfg);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	randomness = kzalloc(size, GFP_KERNEL);
+	if (!randomness)
+		return -ENOMEM;
+
+	nvmem_cfg->reg_read(sid, 0, randomness, size);
+	add_device_randomness(randomness, size);
+	kfree(randomness);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static const struct sunxi_sid_cfg sun4i_a10_cfg = {
+	.size = 0x10,
+};
+
+static const struct sunxi_sid_cfg sun7i_a20_cfg = {
+	.size = 0x200,
+};
+
+static const struct sunxi_sid_cfg sun8i_h3_cfg = {
+	.value_offset = 0x200,
+	.size = 0x100,
+	.need_register_readout = true,
+};
+
+static const struct sunxi_sid_cfg sun20i_d1_cfg = {
+	.value_offset = 0x200,
+	.size = 0x100,
+};
+
+static const struct sunxi_sid_cfg sun50i_a64_cfg = {
+	.value_offset = 0x200,
+	.size = 0x100,
+	.need_register_readout = true,
+};
+
+static const struct sunxi_sid_cfg sun50i_h6_cfg = {
+	.value_offset = 0x200,
+	.size = 0x200,
+};
+
+static const struct of_device_id sunxi_sid_of_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg },
+	{ .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
+	{ .compatible = "allwinner,sun8i-a83t-sid", .data = &sun50i_a64_cfg },
+	{ .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
+	{ .compatible = "allwinner,sun20i-d1-sid", .data = &sun20i_d1_cfg },
+	{ .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
+	{ .compatible = "allwinner,sun50i-h5-sid", .data = &sun50i_a64_cfg },
+	{ .compatible = "allwinner,sun50i-h6-sid", .data = &sun50i_h6_cfg },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
+
+static struct platform_driver sunxi_sid_driver = {
+	.probe = sunxi_sid_probe,
+	.driver = {
+		.name = "eeprom-sunxi-sid",
+		.of_match_table = sunxi_sid_of_match,
+	},
+};
+module_platform_driver(sunxi_sid_driver);
+
+MODULE_AUTHOR("Oliver Schinagl <oliver@schinagl.nl>");
+MODULE_DESCRIPTION("Allwinner sunxi security id driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
new file mode 100644
index 000000000..4fdbdcceb
--- /dev/null
+++ b/drivers/nvmem/u-boot-env.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum u_boot_env_format {
+	U_BOOT_FORMAT_SINGLE,
+	U_BOOT_FORMAT_REDUNDANT,
+};
+
+struct u_boot_env {
+	struct device *dev;
+	enum u_boot_env_format format;
+
+	struct mtd_info *mtd;
+
+	/* Cells */
+	struct nvmem_cell_info *cells;
+	int ncells;
+};
+
+struct u_boot_env_image_single {
+	__le32 crc32;
+	uint8_t data[];
+} __packed;
+
+struct u_boot_env_image_redundant {
+	__le32 crc32;
+	u8 mark;
+	uint8_t data[];
+} __packed;
+
+static int u_boot_env_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct u_boot_env *priv = context;
+	struct device *dev = priv->dev;
+	size_t bytes_read;
+	int err;
+
+	err = mtd_read(priv->mtd, offset, bytes, &bytes_read, val);
+	if (err && !mtd_is_bitflip(err)) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		return err;
+	}
+
+	if (bytes_read != bytes) {
+		dev_err(dev, "Failed to read %zu bytes\n", bytes);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
+				size_t data_offset, size_t data_len)
+{
+	struct device *dev = priv->dev;
+	char *data = buf + data_offset;
+	char *var, *value, *eq;
+	int idx;
+
+	priv->ncells = 0;
+	for (var = data; var < data + data_len && *var; var += strlen(var) + 1)
+		priv->ncells++;
+
+	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
+	if (!priv->cells)
+		return -ENOMEM;
+
+	for (var = data, idx = 0;
+	     var < data + data_len && *var;
+	     var = value + strlen(value) + 1, idx++) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		*eq = '\0';
+		value = eq + 1;
+
+		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
+		if (!priv->cells[idx].name)
+			return -ENOMEM;
+		priv->cells[idx].offset = data_offset + value - data;
+		priv->cells[idx].bytes = strlen(value);
+		priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
+	}
+
+	if (WARN_ON(idx != priv->ncells))
+		priv->ncells = idx;
+
+	return 0;
+}
+
+static int u_boot_env_parse(struct u_boot_env *priv)
+{
+	struct device *dev = priv->dev;
+	size_t crc32_data_offset;
+	size_t crc32_data_len;
+	size_t crc32_offset;
+	size_t data_offset;
+	size_t data_len;
+	uint32_t crc32;
+	uint32_t calc;
+	size_t bytes;
+	uint8_t *buf;
+	int err;
+
+	buf = kcalloc(1, priv->mtd->size, GFP_KERNEL);
+	if (!buf) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	err = mtd_read(priv->mtd, 0, priv->mtd->size, &bytes, buf);
+	if ((err && !mtd_is_bitflip(err)) || bytes != priv->mtd->size) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		goto err_kfree;
+	}
+
+	switch (priv->format) {
+	case U_BOOT_FORMAT_SINGLE:
+		crc32_offset = offsetof(struct u_boot_env_image_single, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_single, data);
+		data_offset = offsetof(struct u_boot_env_image_single, data);
+		break;
+	case U_BOOT_FORMAT_REDUNDANT:
+		crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, data);
+		data_offset = offsetof(struct u_boot_env_image_redundant, data);
+		break;
+	}
+	crc32 = le32_to_cpu(*(__le32 *)(buf + crc32_offset));
+	crc32_data_len = priv->mtd->size - crc32_data_offset;
+	data_len = priv->mtd->size - data_offset;
+
+	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
+	if (calc != crc32) {
+		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
+		err = -EINVAL;
+		goto err_kfree;
+	}
+
+	buf[priv->mtd->size - 1] = '\0';
+	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
+	if (err)
+		dev_err(dev, "Failed to add cells: %d\n", err);
+
+err_kfree:
+	kfree(buf);
+err_out:
+	return err;
+}
+
+static int u_boot_env_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.name = "u-boot-env",
+		.reg_read = u_boot_env_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct u_boot_env *priv;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	priv->format = (uintptr_t)of_device_get_match_data(dev);
+
+	priv->mtd = of_get_mtd_device_by_node(np);
+	if (IS_ERR(priv->mtd)) {
+		dev_err_probe(dev, PTR_ERR(priv->mtd), "Failed to get %pOF MTD\n", np);
+		return PTR_ERR(priv->mtd);
+	}
+
+	err = u_boot_env_parse(priv);
+	if (err)
+		return err;
+
+	config.dev = dev;
+	config.cells = priv->cells;
+	config.ncells = priv->ncells;
+	config.priv = priv;
+	config.size = priv->mtd->size;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static const struct of_device_id u_boot_env_of_match_table[] = {
+	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
+	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{},
+};
+
+static struct platform_driver u_boot_env_driver = {
+	.probe = u_boot_env_probe,
+	.driver = {
+		.name = "u_boot_env",
+		.of_match_table = u_boot_env_of_match_table,
+	},
+};
+module_platform_driver(u_boot_env_driver);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
diff --git a/drivers/nvmem/uniphier-efuse.c b/drivers/nvmem/uniphier-efuse.c
new file mode 100644
index 000000000..aca910b3b
--- /dev/null
+++ b/drivers/nvmem/uniphier-efuse.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UniPhier eFuse driver
+ *
+ * Copyright (C) 2017 Socionext Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct uniphier_efuse_priv {
+	void __iomem *base;
+};
+
+static int uniphier_reg_read(void *context,
+			     unsigned int reg, void *_val, size_t bytes)
+{
+	struct uniphier_efuse_priv *priv = context;
+	u8 *val = _val;
+	int offs;
+
+	for (offs = 0; offs < bytes; offs += sizeof(u8))
+		*val++ = readb(priv->base + reg + offs);
+
+	return 0;
+}
+
+static int uniphier_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nvmem_config econfig = {};
+	struct uniphier_efuse_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	econfig.stride = 1;
+	econfig.word_size = 1;
+	econfig.read_only = true;
+	econfig.reg_read = uniphier_reg_read;
+	econfig.size = resource_size(res);
+	econfig.priv = priv;
+	econfig.dev = dev;
+	nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id uniphier_efuse_of_match[] = {
+	{ .compatible = "socionext,uniphier-efuse",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, uniphier_efuse_of_match);
+
+static struct platform_driver uniphier_efuse_driver = {
+	.probe = uniphier_efuse_probe,
+	.driver = {
+		.name = "uniphier-efuse",
+		.of_match_table = uniphier_efuse_of_match,
+	},
+};
+module_platform_driver(uniphier_efuse_driver);
+
+MODULE_AUTHOR("Keiji Hayashibara <hayashibara.keiji@socionext.com>");
+MODULE_DESCRIPTION("UniPhier eFuse driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/vf610-ocotp.c b/drivers/nvmem/vf610-ocotp.c
new file mode 100644
index 000000000..5b6cad168
--- /dev/null
+++ b/drivers/nvmem/vf610-ocotp.c
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Toradex AG.
+ *
+ * Author: Sanchayan Maity <sanchayan.maity@toradex.com>
+ *
+ * Based on the barebox ocotp driver,
+ * Copyright (c) 2010 Baruch Siach <baruch@tkos.co.il>
+ *	Orex Computed Radiography
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* OCOTP Register Offsets */
+#define OCOTP_CTRL_REG				0x00
+#define OCOTP_CTRL_SET				0x04
+#define OCOTP_CTRL_CLR				0x08
+#define OCOTP_TIMING				0x10
+#define OCOTP_DATA				0x20
+#define OCOTP_READ_CTRL_REG			0x30
+#define OCOTP_READ_FUSE_DATA			0x40
+
+/* OCOTP Register bits and masks */
+#define OCOTP_CTRL_WR_UNLOCK			16
+#define OCOTP_CTRL_WR_UNLOCK_KEY		0x3E77
+#define OCOTP_CTRL_WR_UNLOCK_MASK		GENMASK(31, 16)
+#define OCOTP_CTRL_ADDR				0
+#define OCOTP_CTRL_ADDR_MASK			GENMASK(6, 0)
+#define OCOTP_CTRL_RELOAD_SHADOWS		BIT(10)
+#define OCOTP_CTRL_ERR				BIT(9)
+#define OCOTP_CTRL_BUSY				BIT(8)
+
+#define OCOTP_TIMING_STROBE_READ		16
+#define OCOTP_TIMING_STROBE_READ_MASK		GENMASK(21, 16)
+#define OCOTP_TIMING_RELAX			12
+#define OCOTP_TIMING_RELAX_MASK			GENMASK(15, 12)
+#define OCOTP_TIMING_STROBE_PROG		0
+#define OCOTP_TIMING_STROBE_PROG_MASK		GENMASK(11, 0)
+
+#define OCOTP_READ_CTRL_READ_FUSE		0x1
+
+#define VF610_OCOTP_TIMEOUT			100000
+
+#define BF(value, field)		(((value) << field) & field##_MASK)
+
+#define DEF_RELAX				20
+
+static const int base_to_fuse_addr_mappings[][2] = {
+	{0x400, 0x00},
+	{0x410, 0x01},
+	{0x420, 0x02},
+	{0x450, 0x05},
+	{0x4F0, 0x0F},
+	{0x600, 0x20},
+	{0x610, 0x21},
+	{0x620, 0x22},
+	{0x630, 0x23},
+	{0x640, 0x24},
+	{0x650, 0x25},
+	{0x660, 0x26},
+	{0x670, 0x27},
+	{0x6F0, 0x2F},
+	{0x880, 0x38},
+	{0x890, 0x39},
+	{0x8A0, 0x3A},
+	{0x8B0, 0x3B},
+	{0x8C0, 0x3C},
+	{0x8D0, 0x3D},
+	{0x8E0, 0x3E},
+	{0x8F0, 0x3F},
+	{0xC80, 0x78},
+	{0xC90, 0x79},
+	{0xCA0, 0x7A},
+	{0xCB0, 0x7B},
+	{0xCC0, 0x7C},
+	{0xCD0, 0x7D},
+	{0xCE0, 0x7E},
+	{0xCF0, 0x7F},
+};
+
+struct vf610_ocotp {
+	void __iomem *base;
+	struct clk *clk;
+	struct device *dev;
+	struct nvmem_device *nvmem;
+	int timing;
+};
+
+static int vf610_ocotp_wait_busy(void __iomem *base)
+{
+	int timeout = VF610_OCOTP_TIMEOUT;
+
+	while ((readl(base) & OCOTP_CTRL_BUSY) && --timeout)
+		udelay(10);
+
+	if (!timeout) {
+		writel(OCOTP_CTRL_ERR, base + OCOTP_CTRL_CLR);
+		return -ETIMEDOUT;
+	}
+
+	udelay(10);
+
+	return 0;
+}
+
+static int vf610_ocotp_calculate_timing(struct vf610_ocotp *ocotp_dev)
+{
+	u32 clk_rate;
+	u32 relax, strobe_read, strobe_prog;
+	u32 timing;
+
+	clk_rate = clk_get_rate(ocotp_dev->clk);
+
+	/* Refer section OTP read/write timing parameters in TRM */
+	relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
+	strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
+	strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
+
+	timing = BF(relax, OCOTP_TIMING_RELAX);
+	timing |= BF(strobe_read, OCOTP_TIMING_STROBE_READ);
+	timing |= BF(strobe_prog, OCOTP_TIMING_STROBE_PROG);
+
+	return timing;
+}
+
+static int vf610_get_fuse_address(int base_addr_offset)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(base_to_fuse_addr_mappings); i++) {
+		if (base_to_fuse_addr_mappings[i][0] == base_addr_offset)
+			return base_to_fuse_addr_mappings[i][1];
+	}
+
+	return -EINVAL;
+}
+
+static int vf610_ocotp_read(void *context, unsigned int offset,
+			void *val, size_t bytes)
+{
+	struct vf610_ocotp *ocotp = context;
+	void __iomem *base = ocotp->base;
+	u32 reg, *buf = val;
+	int fuse_addr;
+	int ret;
+
+	while (bytes > 0) {
+		fuse_addr = vf610_get_fuse_address(offset);
+		if (fuse_addr > 0) {
+			writel(ocotp->timing, base + OCOTP_TIMING);
+			ret = vf610_ocotp_wait_busy(base + OCOTP_CTRL_REG);
+			if (ret)
+				return ret;
+
+			reg = readl(base + OCOTP_CTRL_REG);
+			reg &= ~OCOTP_CTRL_ADDR_MASK;
+			reg &= ~OCOTP_CTRL_WR_UNLOCK_MASK;
+			reg |= BF(fuse_addr, OCOTP_CTRL_ADDR);
+			writel(reg, base + OCOTP_CTRL_REG);
+
+			writel(OCOTP_READ_CTRL_READ_FUSE,
+				base + OCOTP_READ_CTRL_REG);
+			ret = vf610_ocotp_wait_busy(base + OCOTP_CTRL_REG);
+			if (ret)
+				return ret;
+
+			if (readl(base) & OCOTP_CTRL_ERR) {
+				dev_dbg(ocotp->dev, "Error reading from fuse address %x\n",
+					fuse_addr);
+				writel(OCOTP_CTRL_ERR, base + OCOTP_CTRL_CLR);
+			}
+
+			/*
+			 * In case of error, we do not abort and expect to read
+			 * 0xBADABADA as mentioned by the TRM. We just read this
+			 * value and return.
+			 */
+			*buf = readl(base + OCOTP_READ_FUSE_DATA);
+		} else {
+			*buf = 0;
+		}
+
+		buf++;
+		bytes -= 4;
+		offset += 4;
+	}
+
+	return 0;
+}
+
+static struct nvmem_config ocotp_config = {
+	.name = "ocotp",
+	.stride = 4,
+	.word_size = 4,
+	.reg_read = vf610_ocotp_read,
+};
+
+static const struct of_device_id ocotp_of_match[] = {
+	{ .compatible = "fsl,vf610-ocotp", },
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, ocotp_of_match);
+
+static int vf610_ocotp_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct vf610_ocotp *ocotp_dev;
+
+	ocotp_dev = devm_kzalloc(dev, sizeof(struct vf610_ocotp), GFP_KERNEL);
+	if (!ocotp_dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ocotp_dev->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ocotp_dev->base))
+		return PTR_ERR(ocotp_dev->base);
+
+	ocotp_dev->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ocotp_dev->clk)) {
+		dev_err(dev, "failed getting clock, err = %ld\n",
+			PTR_ERR(ocotp_dev->clk));
+		return PTR_ERR(ocotp_dev->clk);
+	}
+	ocotp_dev->dev = dev;
+	ocotp_dev->timing = vf610_ocotp_calculate_timing(ocotp_dev);
+
+	ocotp_config.size = resource_size(res);
+	ocotp_config.priv = ocotp_dev;
+	ocotp_config.dev = dev;
+
+	ocotp_dev->nvmem = devm_nvmem_register(dev, &ocotp_config);
+
+	return PTR_ERR_OR_ZERO(ocotp_dev->nvmem);
+}
+
+static struct platform_driver vf610_ocotp_driver = {
+	.probe = vf610_ocotp_probe,
+	.driver = {
+		.name = "vf610-ocotp",
+		.of_match_table = ocotp_of_match,
+	},
+};
+module_platform_driver(vf610_ocotp_driver);
+MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>");
+MODULE_DESCRIPTION("Vybrid OCOTP driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/nvmem/zynqmp_nvmem.c b/drivers/nvmem/zynqmp_nvmem.c
new file mode 100644
index 000000000..e28d7b133
--- /dev/null
+++ b/drivers/nvmem/zynqmp_nvmem.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Xilinx, Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+
+#define SILICON_REVISION_MASK 0xF
+
+struct zynqmp_nvmem_data {
+	struct device *dev;
+	struct nvmem_device *nvmem;
+};
+
+static int zynqmp_nvmem_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	int ret;
+	int idcode, version;
+	struct zynqmp_nvmem_data *priv = context;
+
+	ret = zynqmp_pm_get_chipid(&idcode, &version);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(priv->dev, "Read chipid val %x %x\n", idcode, version);
+	*(int *)val = version & SILICON_REVISION_MASK;
+
+	return 0;
+}
+
+static struct nvmem_config econfig = {
+	.name = "zynqmp-nvmem",
+	.owner = THIS_MODULE,
+	.word_size = 1,
+	.size = 1,
+	.read_only = true,
+};
+
+static const struct of_device_id zynqmp_nvmem_match[] = {
+	{ .compatible = "xlnx,zynqmp-nvmem-fw", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, zynqmp_nvmem_match);
+
+static int zynqmp_nvmem_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct zynqmp_nvmem_data *priv;
+
+	priv = devm_kzalloc(dev, sizeof(struct zynqmp_nvmem_data), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	econfig.dev = dev;
+	econfig.reg_read = zynqmp_nvmem_read;
+	econfig.priv = priv;
+
+	priv->nvmem = devm_nvmem_register(dev, &econfig);
+
+	return PTR_ERR_OR_ZERO(priv->nvmem);
+}
+
+static struct platform_driver zynqmp_nvmem_driver = {
+	.probe = zynqmp_nvmem_probe,
+	.driver = {
+		.name = "zynqmp-nvmem",
+		.of_match_table = zynqmp_nvmem_match,
+	},
+};
+
+module_platform_driver(zynqmp_nvmem_driver);
+
+MODULE_AUTHOR("Michal Simek <michal.simek@xilinx.com>, Nava kishore Manne <navam@xilinx.com>");
+MODULE_DESCRIPTION("ZynqMP NVMEM driver");
+MODULE_LICENSE("GPL");