Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 100 insertions, 0 deletions

diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
new file mode 100644
index 000000000..17ef05aa8
--- /dev/null
+++ b/drivers/pcmcia/soc_common.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * linux/drivers/pcmcia/soc_common.h
+ *
+ * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
+ *
+ * This file contains definitions for the PCMCIA support code common to
+ * integrated SOCs like the SA-11x0 and PXA2xx microprocessors.
+ */
+#ifndef _ASM_ARCH_PCMCIA
+#define _ASM_ARCH_PCMCIA
+
+/* include the world */
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/soc_common.h>
+
+struct device;
+struct gpio_desc;
+struct pcmcia_low_level;
+struct regulator;
+
+struct skt_dev_info {
+	int nskt;
+	struct soc_pcmcia_socket skt[];
+};
+
+struct soc_pcmcia_timing {
+	unsigned short io;
+	unsigned short mem;
+	unsigned short attr;
+};
+
+extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *, struct soc_pcmcia_timing *);
+
+void soc_pcmcia_init_one(struct soc_pcmcia_socket *skt,
+	const struct pcmcia_low_level *ops, struct device *dev);
+void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt);
+int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt);
+int soc_pcmcia_request_gpiods(struct soc_pcmcia_socket *skt);
+
+void soc_common_cf_socket_state(struct soc_pcmcia_socket *skt,
+	struct pcmcia_state *state);
+
+int soc_pcmcia_regulator_set(struct soc_pcmcia_socket *skt,
+	struct soc_pcmcia_regulator *r, int v);
+
+#ifdef CONFIG_PCMCIA_DEBUG
+
+extern void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
+			     int lvl, const char *fmt, ...);
+
+#define debug(skt, lvl, fmt, arg...) \
+	soc_pcmcia_debug(skt, __func__, lvl, fmt , ## arg)
+
+#else
+#define debug(skt, lvl, fmt, arg...) do { } while (0)
+#endif
+
+
+/*
+ * The PC Card Standard, Release 7, section 4.13.4, says that twIORD
+ * has a minimum value of 165ns. Section 4.13.5 says that twIOWR has
+ * a minimum value of 165ns, as well. Section 4.7.2 (describing
+ * common and attribute memory write timing) says that twWE has a
+ * minimum value of 150ns for a 250ns cycle time (for 5V operation;
+ * see section 4.7.4), or 300ns for a 600ns cycle time (for 3.3V
+ * operation, also section 4.7.4). Section 4.7.3 says that taOE
+ * has a maximum value of 150ns for a 300ns cycle time (for 5V
+ * operation), or 300ns for a 600ns cycle time (for 3.3V operation).
+ *
+ * When configuring memory maps, Card Services appears to adopt the policy
+ * that a memory access time of "0" means "use the default." The default
+ * PCMCIA I/O command width time is 165ns. The default PCMCIA 5V attribute
+ * and memory command width time is 150ns; the PCMCIA 3.3V attribute and
+ * memory command width time is 300ns.
+ */
+#define SOC_PCMCIA_IO_ACCESS		(165)
+#define SOC_PCMCIA_5V_MEM_ACCESS	(150)
+#define SOC_PCMCIA_3V_MEM_ACCESS	(300)
+#define SOC_PCMCIA_ATTR_MEM_ACCESS	(300)
+
+/*
+ * The socket driver actually works nicely in interrupt-driven form,
+ * so the (relatively infrequent) polling is "just to be sure."
+ */
+#define SOC_PCMCIA_POLL_PERIOD    (2*HZ)
+
+
+/* I/O pins replacing memory pins
+ * (PCMCIA System Architecture, 2nd ed., by Don Anderson, p.75)
+ *
+ * These signals change meaning when going from memory-only to
+ * memory-or-I/O interface:
+ */
+#define iostschg bvd1
+#define iospkr   bvd2
+
+#endif