Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1015 insertions, 0 deletions

diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
new file mode 100644
index 000000000..96a20ce94
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -0,0 +1,1015 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Microsemi/Microchip SoCs serial gpio driver
+ *
+ * Author: Lars Povlsen <lars.povlsen@microchip.com>
+ *
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/mfd/ocelot.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#include "core.h"
+#include "pinconf.h"
+
+#define SGPIO_BITS_PER_WORD	32
+#define SGPIO_MAX_BITS		4
+#define SGPIO_SRC_BITS		3 /* 3 bit wide field per pin */
+
+enum {
+	REG_INPUT_DATA,
+	REG_PORT_CONFIG,
+	REG_PORT_ENABLE,
+	REG_SIO_CONFIG,
+	REG_SIO_CLOCK,
+	REG_INT_POLARITY,
+	REG_INT_TRIGGER,
+	REG_INT_ACK,
+	REG_INT_ENABLE,
+	REG_INT_IDENT,
+	MAXREG
+};
+
+enum {
+	SGPIO_ARCH_LUTON,
+	SGPIO_ARCH_OCELOT,
+	SGPIO_ARCH_SPARX5,
+};
+
+enum {
+	SGPIO_FLAGS_HAS_IRQ	= BIT(0),
+};
+
+struct sgpio_properties {
+	int arch;
+	int flags;
+	u8 regoff[MAXREG];
+};
+
+#define SGPIO_LUTON_AUTO_REPEAT  BIT(5)
+#define SGPIO_LUTON_PORT_WIDTH   GENMASK(3, 2)
+#define SGPIO_LUTON_CLK_FREQ     GENMASK(11, 0)
+#define SGPIO_LUTON_BIT_SOURCE   GENMASK(11, 0)
+
+#define SGPIO_OCELOT_AUTO_REPEAT BIT(10)
+#define SGPIO_OCELOT_SINGLE_SHOT BIT(11)
+#define SGPIO_OCELOT_PORT_WIDTH  GENMASK(8, 7)
+#define SGPIO_OCELOT_CLK_FREQ    GENMASK(19, 8)
+#define SGPIO_OCELOT_BIT_SOURCE  GENMASK(23, 12)
+
+#define SGPIO_SPARX5_AUTO_REPEAT BIT(6)
+#define SGPIO_SPARX5_SINGLE_SHOT BIT(7)
+#define SGPIO_SPARX5_PORT_WIDTH  GENMASK(4, 3)
+#define SGPIO_SPARX5_CLK_FREQ    GENMASK(19, 8)
+#define SGPIO_SPARX5_BIT_SOURCE  GENMASK(23, 12)
+
+#define SGPIO_MASTER_INTR_ENA    BIT(0)
+
+#define SGPIO_INT_TRG_LEVEL	0
+#define SGPIO_INT_TRG_EDGE	1
+#define SGPIO_INT_TRG_EDGE_FALL	2
+#define SGPIO_INT_TRG_EDGE_RISE	3
+
+#define SGPIO_TRG_LEVEL_HIGH	0
+#define SGPIO_TRG_LEVEL_LOW	1
+
+static const struct sgpio_properties properties_luton = {
+	.arch   = SGPIO_ARCH_LUTON,
+	.regoff = { 0x00, 0x09, 0x29, 0x2a, 0x2b },
+};
+
+static const struct sgpio_properties properties_ocelot = {
+	.arch   = SGPIO_ARCH_OCELOT,
+	.regoff = { 0x00, 0x06, 0x26, 0x04, 0x05 },
+};
+
+static const struct sgpio_properties properties_sparx5 = {
+	.arch   = SGPIO_ARCH_SPARX5,
+	.flags  = SGPIO_FLAGS_HAS_IRQ,
+	.regoff = { 0x00, 0x06, 0x26, 0x04, 0x05, 0x2a, 0x32, 0x3a, 0x3e, 0x42 },
+};
+
+static const char * const functions[] = { "gpio" };
+
+struct sgpio_bank {
+	struct sgpio_priv *priv;
+	bool is_input;
+	struct gpio_chip gpio;
+	struct pinctrl_desc pctl_desc;
+};
+
+struct sgpio_priv {
+	struct device *dev;
+	struct sgpio_bank in;
+	struct sgpio_bank out;
+	u32 bitcount;
+	u32 ports;
+	u32 clock;
+	struct regmap *regs;
+	const struct sgpio_properties *properties;
+	spinlock_t lock;
+	/* protects the config register and single shot mode */
+	struct mutex poll_lock;
+};
+
+struct sgpio_port_addr {
+	u8 port;
+	u8 bit;
+};
+
+static inline void sgpio_pin_to_addr(struct sgpio_priv *priv, int pin,
+				     struct sgpio_port_addr *addr)
+{
+	addr->port = pin / priv->bitcount;
+	addr->bit = pin % priv->bitcount;
+}
+
+static inline int sgpio_addr_to_pin(struct sgpio_priv *priv, int port, int bit)
+{
+	return bit + port * priv->bitcount;
+}
+
+static inline u32 sgpio_get_addr(struct sgpio_priv *priv, u32 rno, u32 off)
+{
+	return (priv->properties->regoff[rno] + off) *
+		regmap_get_reg_stride(priv->regs);
+}
+
+static u32 sgpio_readl(struct sgpio_priv *priv, u32 rno, u32 off)
+{
+	u32 addr = sgpio_get_addr(priv, rno, off);
+	u32 val = 0;
+	int ret;
+
+	ret = regmap_read(priv->regs, addr, &val);
+	WARN_ONCE(ret, "error reading sgpio reg %d\n", ret);
+
+	return val;
+}
+
+static void sgpio_writel(struct sgpio_priv *priv,
+				u32 val, u32 rno, u32 off)
+{
+	u32 addr = sgpio_get_addr(priv, rno, off);
+	int ret;
+
+	ret = regmap_write(priv->regs, addr, val);
+	WARN_ONCE(ret, "error writing sgpio reg %d\n", ret);
+}
+
+static inline void sgpio_clrsetbits(struct sgpio_priv *priv,
+				    u32 rno, u32 off, u32 clear, u32 set)
+{
+	u32 addr = sgpio_get_addr(priv, rno, off);
+	int ret;
+
+	ret = regmap_update_bits(priv->regs, addr, clear | set, set);
+	WARN_ONCE(ret, "error updating sgpio reg %d\n", ret);
+}
+
+static inline void sgpio_configure_bitstream(struct sgpio_priv *priv)
+{
+	int width = priv->bitcount - 1;
+	u32 clr, set;
+
+	switch (priv->properties->arch) {
+	case SGPIO_ARCH_LUTON:
+		clr = SGPIO_LUTON_PORT_WIDTH;
+		set = SGPIO_LUTON_AUTO_REPEAT |
+			FIELD_PREP(SGPIO_LUTON_PORT_WIDTH, width);
+		break;
+	case SGPIO_ARCH_OCELOT:
+		clr = SGPIO_OCELOT_PORT_WIDTH;
+		set = SGPIO_OCELOT_AUTO_REPEAT |
+			FIELD_PREP(SGPIO_OCELOT_PORT_WIDTH, width);
+		break;
+	case SGPIO_ARCH_SPARX5:
+		clr = SGPIO_SPARX5_PORT_WIDTH;
+		set = SGPIO_SPARX5_AUTO_REPEAT |
+			FIELD_PREP(SGPIO_SPARX5_PORT_WIDTH, width);
+		break;
+	default:
+		return;
+	}
+	sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, clr, set);
+}
+
+static inline void sgpio_configure_clock(struct sgpio_priv *priv, u32 clkfrq)
+{
+	u32 clr, set;
+
+	switch (priv->properties->arch) {
+	case SGPIO_ARCH_LUTON:
+		clr = SGPIO_LUTON_CLK_FREQ;
+		set = FIELD_PREP(SGPIO_LUTON_CLK_FREQ, clkfrq);
+		break;
+	case SGPIO_ARCH_OCELOT:
+		clr = SGPIO_OCELOT_CLK_FREQ;
+		set = FIELD_PREP(SGPIO_OCELOT_CLK_FREQ, clkfrq);
+		break;
+	case SGPIO_ARCH_SPARX5:
+		clr = SGPIO_SPARX5_CLK_FREQ;
+		set = FIELD_PREP(SGPIO_SPARX5_CLK_FREQ, clkfrq);
+		break;
+	default:
+		return;
+	}
+	sgpio_clrsetbits(priv, REG_SIO_CLOCK, 0, clr, set);
+}
+
+static int sgpio_single_shot(struct sgpio_priv *priv)
+{
+	u32 addr = sgpio_get_addr(priv, REG_SIO_CONFIG, 0);
+	int ret, ret2;
+	u32 ctrl;
+	unsigned int single_shot;
+	unsigned int auto_repeat;
+
+	switch (priv->properties->arch) {
+	case SGPIO_ARCH_LUTON:
+		/* not supported for now */
+		return 0;
+	case SGPIO_ARCH_OCELOT:
+		single_shot = SGPIO_OCELOT_SINGLE_SHOT;
+		auto_repeat = SGPIO_OCELOT_AUTO_REPEAT;
+		break;
+	case SGPIO_ARCH_SPARX5:
+		single_shot = SGPIO_SPARX5_SINGLE_SHOT;
+		auto_repeat = SGPIO_SPARX5_AUTO_REPEAT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Trigger immediate burst. This only works when auto repeat is turned
+	 * off. Otherwise, the single shot bit will never be cleared by the
+	 * hardware. Measurements showed that an update might take as long as
+	 * the burst gap. On a LAN9668 this is about 50ms for the largest
+	 * setting.
+	 * After the manual burst, reenable the auto repeat mode again.
+	 */
+	mutex_lock(&priv->poll_lock);
+	ret = regmap_update_bits(priv->regs, addr, single_shot | auto_repeat,
+				 single_shot);
+	if (ret)
+		goto out;
+
+	ret = regmap_read_poll_timeout(priv->regs, addr, ctrl,
+				       !(ctrl & single_shot), 100, 60000);
+
+	/* reenable auto repeat mode even if there was an error */
+	ret2 = regmap_update_bits(priv->regs, addr, auto_repeat, auto_repeat);
+out:
+	mutex_unlock(&priv->poll_lock);
+
+	return ret ?: ret2;
+}
+
+static int sgpio_output_set(struct sgpio_priv *priv,
+			    struct sgpio_port_addr *addr,
+			    int value)
+{
+	unsigned int bit = SGPIO_SRC_BITS * addr->bit;
+	u32 reg = sgpio_get_addr(priv, REG_PORT_CONFIG, addr->port);
+	bool changed;
+	u32 clr, set;
+	int ret;
+
+	switch (priv->properties->arch) {
+	case SGPIO_ARCH_LUTON:
+		clr = FIELD_PREP(SGPIO_LUTON_BIT_SOURCE, BIT(bit));
+		set = FIELD_PREP(SGPIO_LUTON_BIT_SOURCE, value << bit);
+		break;
+	case SGPIO_ARCH_OCELOT:
+		clr = FIELD_PREP(SGPIO_OCELOT_BIT_SOURCE, BIT(bit));
+		set = FIELD_PREP(SGPIO_OCELOT_BIT_SOURCE, value << bit);
+		break;
+	case SGPIO_ARCH_SPARX5:
+		clr = FIELD_PREP(SGPIO_SPARX5_BIT_SOURCE, BIT(bit));
+		set = FIELD_PREP(SGPIO_SPARX5_BIT_SOURCE, value << bit);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits_check(priv->regs, reg, clr | set, set,
+				       &changed);
+	if (ret)
+		return ret;
+
+	if (changed) {
+		ret = sgpio_single_shot(priv);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int sgpio_output_get(struct sgpio_priv *priv,
+			    struct sgpio_port_addr *addr)
+{
+	u32 val, portval = sgpio_readl(priv, REG_PORT_CONFIG, addr->port);
+	unsigned int bit = SGPIO_SRC_BITS * addr->bit;
+
+	switch (priv->properties->arch) {
+	case SGPIO_ARCH_LUTON:
+		val = FIELD_GET(SGPIO_LUTON_BIT_SOURCE, portval);
+		break;
+	case SGPIO_ARCH_OCELOT:
+		val = FIELD_GET(SGPIO_OCELOT_BIT_SOURCE, portval);
+		break;
+	case SGPIO_ARCH_SPARX5:
+		val = FIELD_GET(SGPIO_SPARX5_BIT_SOURCE, portval);
+		break;
+	default:
+		val = 0;
+		break;
+	}
+	return !!(val & BIT(bit));
+}
+
+static int sgpio_input_get(struct sgpio_priv *priv,
+			   struct sgpio_port_addr *addr)
+{
+	return !!(sgpio_readl(priv, REG_INPUT_DATA, addr->bit) & BIT(addr->port));
+}
+
+static int sgpio_pinconf_get(struct pinctrl_dev *pctldev,
+			     unsigned int pin, unsigned long *config)
+{
+	struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+	u32 param = pinconf_to_config_param(*config);
+	struct sgpio_priv *priv = bank->priv;
+	struct sgpio_port_addr addr;
+	int val;
+
+	sgpio_pin_to_addr(priv, pin, &addr);
+
+	switch (param) {
+	case PIN_CONFIG_INPUT_ENABLE:
+		val = bank->is_input;
+		break;
+
+	case PIN_CONFIG_OUTPUT_ENABLE:
+		val = !bank->is_input;
+		break;
+
+	case PIN_CONFIG_OUTPUT:
+		if (bank->is_input)
+			return -EINVAL;
+		val = sgpio_output_get(priv, &addr);
+		break;
+
+	default:
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, val);
+
+	return 0;
+}
+
+static int sgpio_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+			     unsigned long *configs, unsigned int num_configs)
+{
+	struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+	struct sgpio_priv *priv = bank->priv;
+	struct sgpio_port_addr addr;
+	int cfg, err = 0;
+	u32 param, arg;
+
+	sgpio_pin_to_addr(priv, pin, &addr);
+
+	for (cfg = 0; cfg < num_configs; cfg++) {
+		param = pinconf_to_config_param(configs[cfg]);
+		arg = pinconf_to_config_argument(configs[cfg]);
+
+		switch (param) {
+		case PIN_CONFIG_OUTPUT:
+			if (bank->is_input)
+				return -EINVAL;
+			err = sgpio_output_set(priv, &addr, arg);
+			break;
+
+		default:
+			err = -ENOTSUPP;
+		}
+	}
+
+	return err;
+}
+
+static const struct pinconf_ops sgpio_confops = {
+	.is_generic = true,
+	.pin_config_get = sgpio_pinconf_get,
+	.pin_config_set = sgpio_pinconf_set,
+	.pin_config_config_dbg_show = pinconf_generic_dump_config,
+};
+
+static int sgpio_get_functions_count(struct pinctrl_dev *pctldev)
+{
+	return 1;
+}
+
+static const char *sgpio_get_function_name(struct pinctrl_dev *pctldev,
+					   unsigned int function)
+{
+	return functions[0];
+}
+
+static int sgpio_get_function_groups(struct pinctrl_dev *pctldev,
+				     unsigned int function,
+				     const char *const **groups,
+				     unsigned *const num_groups)
+{
+	*groups  = functions;
+	*num_groups = ARRAY_SIZE(functions);
+
+	return 0;
+}
+
+static int sgpio_pinmux_set_mux(struct pinctrl_dev *pctldev,
+				unsigned int selector, unsigned int group)
+{
+	return 0;
+}
+
+static int sgpio_gpio_set_direction(struct pinctrl_dev *pctldev,
+				    struct pinctrl_gpio_range *range,
+				    unsigned int pin, bool input)
+{
+	struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+
+	return (input == bank->is_input) ? 0 : -EINVAL;
+}
+
+static int sgpio_gpio_request_enable(struct pinctrl_dev *pctldev,
+				     struct pinctrl_gpio_range *range,
+				     unsigned int offset)
+{
+	struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+	struct sgpio_priv *priv = bank->priv;
+	struct sgpio_port_addr addr;
+
+	sgpio_pin_to_addr(priv, offset, &addr);
+
+	if ((priv->ports & BIT(addr.port)) == 0) {
+		dev_warn(priv->dev, "Request port %d.%d: Port is not enabled\n",
+			 addr.port, addr.bit);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct pinmux_ops sgpio_pmx_ops = {
+	.get_functions_count = sgpio_get_functions_count,
+	.get_function_name = sgpio_get_function_name,
+	.get_function_groups = sgpio_get_function_groups,
+	.set_mux = sgpio_pinmux_set_mux,
+	.gpio_set_direction = sgpio_gpio_set_direction,
+	.gpio_request_enable = sgpio_gpio_request_enable,
+};
+
+static int sgpio_pctl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+
+	return bank->pctl_desc.npins;
+}
+
+static const char *sgpio_pctl_get_group_name(struct pinctrl_dev *pctldev,
+					     unsigned int group)
+{
+	struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+
+	return bank->pctl_desc.pins[group].name;
+}
+
+static int sgpio_pctl_get_group_pins(struct pinctrl_dev *pctldev,
+				     unsigned int group,
+				     const unsigned int **pins,
+				     unsigned int *num_pins)
+{
+	struct sgpio_bank *bank = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = &bank->pctl_desc.pins[group].number;
+	*num_pins = 1;
+
+	return 0;
+}
+
+static const struct pinctrl_ops sgpio_pctl_ops = {
+	.get_groups_count = sgpio_pctl_get_groups_count,
+	.get_group_name = sgpio_pctl_get_group_name,
+	.get_group_pins = sgpio_pctl_get_group_pins,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinconf_generic_dt_free_map,
+};
+
+static int microchip_sgpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct sgpio_bank *bank = gpiochip_get_data(gc);
+
+	/* Fixed-position function */
+	return bank->is_input ? 0 : -EINVAL;
+}
+
+static int microchip_sgpio_direction_output(struct gpio_chip *gc,
+				       unsigned int gpio, int value)
+{
+	struct sgpio_bank *bank = gpiochip_get_data(gc);
+	struct sgpio_priv *priv = bank->priv;
+	struct sgpio_port_addr addr;
+
+	/* Fixed-position function */
+	if (bank->is_input)
+		return -EINVAL;
+
+	sgpio_pin_to_addr(priv, gpio, &addr);
+
+	return sgpio_output_set(priv, &addr, value);
+}
+
+static int microchip_sgpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct sgpio_bank *bank = gpiochip_get_data(gc);
+
+	return bank->is_input ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
+}
+
+static void microchip_sgpio_set_value(struct gpio_chip *gc,
+				unsigned int gpio, int value)
+{
+	microchip_sgpio_direction_output(gc, gpio, value);
+}
+
+static int microchip_sgpio_get_value(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct sgpio_bank *bank = gpiochip_get_data(gc);
+	struct sgpio_priv *priv = bank->priv;
+	struct sgpio_port_addr addr;
+
+	sgpio_pin_to_addr(priv, gpio, &addr);
+
+	return bank->is_input ? sgpio_input_get(priv, &addr) : sgpio_output_get(priv, &addr);
+}
+
+static int microchip_sgpio_of_xlate(struct gpio_chip *gc,
+			       const struct of_phandle_args *gpiospec,
+			       u32 *flags)
+{
+	struct sgpio_bank *bank = gpiochip_get_data(gc);
+	struct sgpio_priv *priv = bank->priv;
+	int pin;
+
+	/*
+	 * Note that the SGIO pin is defined by *2* numbers, a port
+	 * number between 0 and 31, and a bit index, 0 to 3.
+	 */
+	if (gpiospec->args[0] > SGPIO_BITS_PER_WORD ||
+	    gpiospec->args[1] > priv->bitcount)
+		return -EINVAL;
+
+	pin = sgpio_addr_to_pin(priv, gpiospec->args[0], gpiospec->args[1]);
+
+	if (pin > gc->ngpio)
+		return -EINVAL;
+
+	if (flags)
+		*flags = gpiospec->args[2];
+
+	return pin;
+}
+
+static int microchip_sgpio_get_ports(struct sgpio_priv *priv)
+{
+	const char *range_property_name = "microchip,sgpio-port-ranges";
+	struct device *dev = priv->dev;
+	u32 range_params[64];
+	int i, nranges, ret;
+
+	/* Calculate port mask */
+	nranges = device_property_count_u32(dev, range_property_name);
+	if (nranges < 2 || nranges % 2 || nranges > ARRAY_SIZE(range_params)) {
+		dev_err(dev, "%s port range: '%s' property\n",
+			nranges == -EINVAL ? "Missing" : "Invalid",
+			range_property_name);
+		return -EINVAL;
+	}
+
+	ret = device_property_read_u32_array(dev, range_property_name,
+					     range_params, nranges);
+	if (ret) {
+		dev_err(dev, "failed to parse '%s' property: %d\n",
+			range_property_name, ret);
+		return ret;
+	}
+	for (i = 0; i < nranges; i += 2) {
+		int start, end;
+
+		start = range_params[i];
+		end = range_params[i + 1];
+		if (start > end || end >= SGPIO_BITS_PER_WORD) {
+			dev_err(dev, "Ill-formed port-range [%d:%d]\n",
+				start, end);
+		}
+		priv->ports |= GENMASK(end, start);
+	}
+
+	return 0;
+}
+
+static void microchip_sgpio_irq_settype(struct irq_data *data,
+					int type,
+					int polarity)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sgpio_bank *bank = gpiochip_get_data(chip);
+	unsigned int gpio = irqd_to_hwirq(data);
+	struct sgpio_port_addr addr;
+	unsigned long flags;
+	u32 ena;
+
+	sgpio_pin_to_addr(bank->priv, gpio, &addr);
+
+	spin_lock_irqsave(&bank->priv->lock, flags);
+
+	/* Disable interrupt while changing type */
+	ena = sgpio_readl(bank->priv, REG_INT_ENABLE, addr.bit);
+	sgpio_writel(bank->priv, ena & ~BIT(addr.port), REG_INT_ENABLE, addr.bit);
+
+	/* Type value spread over 2 registers sets: low, high bit */
+	sgpio_clrsetbits(bank->priv, REG_INT_TRIGGER, addr.bit,
+			 BIT(addr.port), (!!(type & 0x1)) << addr.port);
+	sgpio_clrsetbits(bank->priv, REG_INT_TRIGGER, SGPIO_MAX_BITS + addr.bit,
+			 BIT(addr.port), (!!(type & 0x2)) << addr.port);
+
+	if (type == SGPIO_INT_TRG_LEVEL)
+		sgpio_clrsetbits(bank->priv, REG_INT_POLARITY, addr.bit,
+				 BIT(addr.port), polarity << addr.port);
+
+	/* Possibly re-enable interrupts */
+	sgpio_writel(bank->priv, ena, REG_INT_ENABLE, addr.bit);
+
+	spin_unlock_irqrestore(&bank->priv->lock, flags);
+}
+
+static void microchip_sgpio_irq_setreg(struct irq_data *data,
+				       int reg,
+				       bool clear)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sgpio_bank *bank = gpiochip_get_data(chip);
+	unsigned int gpio = irqd_to_hwirq(data);
+	struct sgpio_port_addr addr;
+
+	sgpio_pin_to_addr(bank->priv, gpio, &addr);
+
+	if (clear)
+		sgpio_clrsetbits(bank->priv, reg, addr.bit, BIT(addr.port), 0);
+	else
+		sgpio_clrsetbits(bank->priv, reg, addr.bit, 0, BIT(addr.port));
+}
+
+static void microchip_sgpio_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+
+	microchip_sgpio_irq_setreg(data, REG_INT_ENABLE, true);
+	gpiochip_disable_irq(chip, data->hwirq);
+}
+
+static void microchip_sgpio_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+
+	gpiochip_enable_irq(chip, data->hwirq);
+	microchip_sgpio_irq_setreg(data, REG_INT_ENABLE, false);
+}
+
+static void microchip_sgpio_irq_ack(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sgpio_bank *bank = gpiochip_get_data(chip);
+	unsigned int gpio = irqd_to_hwirq(data);
+	struct sgpio_port_addr addr;
+
+	sgpio_pin_to_addr(bank->priv, gpio, &addr);
+
+	sgpio_writel(bank->priv, BIT(addr.port), REG_INT_ACK, addr.bit);
+}
+
+static int microchip_sgpio_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	type &= IRQ_TYPE_SENSE_MASK;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_BOTH:
+		irq_set_handler_locked(data, handle_edge_irq);
+		microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_EDGE, 0);
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		irq_set_handler_locked(data, handle_edge_irq);
+		microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_EDGE_RISE, 0);
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_set_handler_locked(data, handle_edge_irq);
+		microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_EDGE_FALL, 0);
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		irq_set_handler_locked(data, handle_level_irq);
+		microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_LEVEL, SGPIO_TRG_LEVEL_HIGH);
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_set_handler_locked(data, handle_level_irq);
+		microchip_sgpio_irq_settype(data, SGPIO_INT_TRG_LEVEL, SGPIO_TRG_LEVEL_LOW);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct irq_chip microchip_sgpio_irqchip = {
+	.name		= "gpio",
+	.irq_mask	= microchip_sgpio_irq_mask,
+	.irq_ack	= microchip_sgpio_irq_ack,
+	.irq_unmask	= microchip_sgpio_irq_unmask,
+	.irq_set_type	= microchip_sgpio_irq_set_type,
+	.flags		= IRQCHIP_IMMUTABLE,
+	GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
+static void sgpio_irq_handler(struct irq_desc *desc)
+{
+	struct irq_chip *parent_chip = irq_desc_get_chip(desc);
+	struct gpio_chip *chip = irq_desc_get_handler_data(desc);
+	struct sgpio_bank *bank = gpiochip_get_data(chip);
+	struct sgpio_priv *priv = bank->priv;
+	int bit, port, gpio;
+	long val;
+
+	for (bit = 0; bit < priv->bitcount; bit++) {
+		val = sgpio_readl(priv, REG_INT_IDENT, bit);
+		if (!val)
+			continue;
+
+		chained_irq_enter(parent_chip, desc);
+
+		for_each_set_bit(port, &val, SGPIO_BITS_PER_WORD) {
+			gpio = sgpio_addr_to_pin(priv, port, bit);
+			generic_handle_domain_irq(chip->irq.domain, gpio);
+		}
+
+		chained_irq_exit(parent_chip, desc);
+	}
+}
+
+static int microchip_sgpio_register_bank(struct device *dev,
+					 struct sgpio_priv *priv,
+					 struct fwnode_handle *fwnode,
+					 int bankno)
+{
+	struct pinctrl_pin_desc *pins;
+	struct pinctrl_desc *pctl_desc;
+	struct pinctrl_dev *pctldev;
+	struct sgpio_bank *bank;
+	struct gpio_chip *gc;
+	u32 ngpios;
+	int i, ret;
+
+	/* Get overall bank struct */
+	bank = (bankno == 0) ? &priv->in : &priv->out;
+	bank->priv = priv;
+
+	if (fwnode_property_read_u32(fwnode, "ngpios", &ngpios)) {
+		dev_info(dev, "failed to get number of gpios for bank%d\n",
+			 bankno);
+		ngpios = 64;
+	}
+
+	priv->bitcount = ngpios / SGPIO_BITS_PER_WORD;
+	if (priv->bitcount > SGPIO_MAX_BITS) {
+		dev_err(dev, "Bit width exceeds maximum (%d)\n",
+			SGPIO_MAX_BITS);
+		return -EINVAL;
+	}
+
+	pctl_desc = &bank->pctl_desc;
+	pctl_desc->name = devm_kasprintf(dev, GFP_KERNEL, "%s-%sput",
+					 dev_name(dev),
+					 bank->is_input ? "in" : "out");
+	if (!pctl_desc->name)
+		return -ENOMEM;
+
+	pctl_desc->pctlops = &sgpio_pctl_ops;
+	pctl_desc->pmxops = &sgpio_pmx_ops;
+	pctl_desc->confops = &sgpio_confops;
+	pctl_desc->owner = THIS_MODULE;
+
+	pins = devm_kzalloc(dev, sizeof(*pins)*ngpios, GFP_KERNEL);
+	if (!pins)
+		return -ENOMEM;
+
+	pctl_desc->npins = ngpios;
+	pctl_desc->pins = pins;
+
+	for (i = 0; i < ngpios; i++) {
+		struct sgpio_port_addr addr;
+
+		sgpio_pin_to_addr(priv, i, &addr);
+
+		pins[i].number = i;
+		pins[i].name = devm_kasprintf(dev, GFP_KERNEL,
+					      "SGPIO_%c_p%db%d",
+					      bank->is_input ? 'I' : 'O',
+					      addr.port, addr.bit);
+		if (!pins[i].name)
+			return -ENOMEM;
+	}
+
+	pctldev = devm_pinctrl_register(dev, pctl_desc, bank);
+	if (IS_ERR(pctldev))
+		return dev_err_probe(dev, PTR_ERR(pctldev), "Failed to register pinctrl\n");
+
+	gc			= &bank->gpio;
+	gc->label		= pctl_desc->name;
+	gc->parent		= dev;
+	gc->fwnode		= fwnode;
+	gc->owner		= THIS_MODULE;
+	gc->get_direction	= microchip_sgpio_get_direction;
+	gc->direction_input	= microchip_sgpio_direction_input;
+	gc->direction_output	= microchip_sgpio_direction_output;
+	gc->get			= microchip_sgpio_get_value;
+	gc->set			= microchip_sgpio_set_value;
+	gc->request		= gpiochip_generic_request;
+	gc->free		= gpiochip_generic_free;
+	gc->of_xlate		= microchip_sgpio_of_xlate;
+	gc->of_gpio_n_cells     = 3;
+	gc->base		= -1;
+	gc->ngpio		= ngpios;
+	gc->can_sleep		= !bank->is_input;
+
+	if (bank->is_input && priv->properties->flags & SGPIO_FLAGS_HAS_IRQ) {
+		int irq;
+
+		irq = fwnode_irq_get(fwnode, 0);
+		if (irq > 0) {
+			struct gpio_irq_chip *girq = &gc->irq;
+
+			gpio_irq_chip_set_chip(girq, &microchip_sgpio_irqchip);
+			girq->parent_handler = sgpio_irq_handler;
+			girq->num_parents = 1;
+			girq->parents = devm_kcalloc(dev, 1,
+						     sizeof(*girq->parents),
+						     GFP_KERNEL);
+			if (!girq->parents)
+				return -ENOMEM;
+			girq->parents[0] = irq;
+			girq->default_type = IRQ_TYPE_NONE;
+			girq->handler = handle_bad_irq;
+
+			/* Disable all individual pins */
+			for (i = 0; i < SGPIO_MAX_BITS; i++)
+				sgpio_writel(priv, 0, REG_INT_ENABLE, i);
+			/* Master enable */
+			sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, 0, SGPIO_MASTER_INTR_ENA);
+		}
+	}
+
+	ret = devm_gpiochip_add_data(dev, gc, bank);
+	if (ret)
+		dev_err(dev, "Failed to register: ret %d\n", ret);
+
+	return ret;
+}
+
+static int microchip_sgpio_probe(struct platform_device *pdev)
+{
+	int div_clock = 0, ret, port, i, nbanks;
+	struct device *dev = &pdev->dev;
+	struct fwnode_handle *fwnode;
+	struct reset_control *reset;
+	struct sgpio_priv *priv;
+	struct clk *clk;
+	u32 val;
+	struct regmap_config regmap_config = {
+		.reg_bits = 32,
+		.val_bits = 32,
+		.reg_stride = 4,
+	};
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	spin_lock_init(&priv->lock);
+	mutex_init(&priv->poll_lock);
+
+	reset = devm_reset_control_get_optional_shared(&pdev->dev, "switch");
+	if (IS_ERR(reset))
+		return dev_err_probe(dev, PTR_ERR(reset), "Failed to get reset\n");
+	reset_control_reset(reset);
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk), "Failed to get clock\n");
+
+	div_clock = clk_get_rate(clk);
+	if (device_property_read_u32(dev, "bus-frequency", &priv->clock))
+		priv->clock = 12500000;
+	if (priv->clock == 0 || priv->clock > (div_clock / 2)) {
+		dev_err(dev, "Invalid frequency %d\n", priv->clock);
+		return -EINVAL;
+	}
+
+	priv->regs = ocelot_regmap_from_resource(pdev, 0, &regmap_config);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->properties = device_get_match_data(dev);
+	priv->in.is_input = true;
+
+	/* Get rest of device properties */
+	ret = microchip_sgpio_get_ports(priv);
+	if (ret)
+		return ret;
+
+	nbanks = device_get_child_node_count(dev);
+	if (nbanks != 2) {
+		dev_err(dev, "Must have 2 banks (have %d)\n", nbanks);
+		return -EINVAL;
+	}
+
+	i = 0;
+	device_for_each_child_node(dev, fwnode) {
+		ret = microchip_sgpio_register_bank(dev, priv, fwnode, i++);
+		if (ret) {
+			fwnode_handle_put(fwnode);
+			return ret;
+		}
+	}
+
+	if (priv->in.gpio.ngpio != priv->out.gpio.ngpio) {
+		dev_err(dev, "Banks must have same GPIO count\n");
+		return -ERANGE;
+	}
+
+	sgpio_configure_bitstream(priv);
+
+	val = max(2U, div_clock / priv->clock);
+	sgpio_configure_clock(priv, val);
+
+	for (port = 0; port < SGPIO_BITS_PER_WORD; port++)
+		sgpio_writel(priv, 0, REG_PORT_CONFIG, port);
+	sgpio_writel(priv, priv->ports, REG_PORT_ENABLE, 0);
+
+	return 0;
+}
+
+static const struct of_device_id microchip_sgpio_gpio_of_match[] = {
+	{
+		.compatible = "microchip,sparx5-sgpio",
+		.data = &properties_sparx5,
+	}, {
+		.compatible = "mscc,luton-sgpio",
+		.data = &properties_luton,
+	}, {
+		.compatible = "mscc,ocelot-sgpio",
+		.data = &properties_ocelot,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, microchip_sgpio_gpio_of_match);
+
+static struct platform_driver microchip_sgpio_pinctrl_driver = {
+	.driver = {
+		.name = "pinctrl-microchip-sgpio",
+		.of_match_table = microchip_sgpio_gpio_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = microchip_sgpio_probe,
+};
+module_platform_driver(microchip_sgpio_pinctrl_driver);
+
+MODULE_DESCRIPTION("Microchip SGPIO Pinctrl Driver");
+MODULE_LICENSE("GPL");