Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 4093 insertions, 0 deletions

diff --git a/drivers/powercap/Kconfig b/drivers/powercap/Kconfig
new file mode 100644
index 000000000..863e240b3
--- /dev/null
+++ b/drivers/powercap/Kconfig
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Generic power capping sysfs interface configuration
+#
+
+menuconfig POWERCAP
+	bool "Generic powercap sysfs driver"
+	help
+	  The power capping sysfs interface allows kernel subsystems to expose power
+	  capping settings to user space in a consistent way.  Usually, it consists
+	  of multiple control types that determine which settings may be exposed and
+	  power zones representing parts of the system that can be subject to power
+	  capping.
+
+	  If you want this code to be compiled in, say Y here.
+
+if POWERCAP
+# Client driver configurations go here.
+config INTEL_RAPL_CORE
+	tristate
+	depends on PCI
+	select IOSF_MBI
+
+config INTEL_RAPL
+	tristate "Intel RAPL Support via MSR Interface"
+	depends on X86 && PCI
+	select INTEL_RAPL_CORE
+	help
+	  This enables support for the Intel Running Average Power Limit (RAPL)
+	  technology via MSR interface, which allows power limits to be enforced
+	  and monitored on modern Intel processors (Sandy Bridge and later).
+
+	  In RAPL, the platform level settings are divided into domains for
+	  fine grained control. These domains include processor package, DRAM
+	  controller, CPU core (Power Plane 0), graphics uncore (Power Plane
+	  1), etc.
+
+config IDLE_INJECT
+	bool "Idle injection framework"
+	depends on CPU_IDLE
+	default n
+	help
+	  This enables support for the idle injection framework. It
+	  provides a way to force idle periods on a set of specified
+	  CPUs for power capping. Idle period can be injected
+	  synchronously on a set of specified CPUs or alternatively
+	  on a per CPU basis.
+
+config DTPM
+	bool "Power capping for Dynamic Thermal Power Management (EXPERIMENTAL)"
+	depends on OF
+	help
+	  This enables support for the power capping for the dynamic
+	  thermal power management userspace engine.
+
+config DTPM_CPU
+	bool "Add CPU power capping based on the energy model"
+	depends on DTPM && ENERGY_MODEL
+	help
+	  This enables support for CPU power limitation based on
+	  energy model.
+
+config DTPM_DEVFREQ
+	bool "Add device power capping based on the energy model"
+	depends on DTPM && ENERGY_MODEL
+	help
+	  This enables support for device power limitation based on
+	  energy model.
+endif
diff --git a/drivers/powercap/Makefile b/drivers/powercap/Makefile
new file mode 100644
index 000000000..494617cda
--- /dev/null
+++ b/drivers/powercap/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_DTPM) += dtpm.o
+obj-$(CONFIG_DTPM_CPU) += dtpm_cpu.o
+obj-$(CONFIG_DTPM_DEVFREQ) += dtpm_devfreq.o
+obj-$(CONFIG_POWERCAP)	+= powercap_sys.o
+obj-$(CONFIG_INTEL_RAPL_CORE) += intel_rapl_common.o
+obj-$(CONFIG_INTEL_RAPL) += intel_rapl_msr.o
+obj-$(CONFIG_IDLE_INJECT) += idle_inject.o
diff --git a/drivers/powercap/dtpm.c b/drivers/powercap/dtpm.c
new file mode 100644
index 000000000..ce920f17f
--- /dev/null
+++ b/drivers/powercap/dtpm.c
@@ -0,0 +1,661 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 Linaro Limited
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
+ * The powercap based Dynamic Thermal Power Management framework
+ * provides to the userspace a consistent API to set the power limit
+ * on some devices.
+ *
+ * DTPM defines the functions to create a tree of constraints. Each
+ * parent node is a virtual description of the aggregation of the
+ * children. It propagates the constraints set at its level to its
+ * children and collect the children power information. The leaves of
+ * the tree are the real devices which have the ability to get their
+ * current power consumption and set their power limit.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/dtpm.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/powercap.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+
+#include "dtpm_subsys.h"
+
+#define DTPM_POWER_LIMIT_FLAG 0
+
+static const char *constraint_name[] = {
+	"Instantaneous",
+};
+
+static DEFINE_MUTEX(dtpm_lock);
+static struct powercap_control_type *pct;
+static struct dtpm *root;
+
+static int get_time_window_us(struct powercap_zone *pcz, int cid, u64 *window)
+{
+	return -ENOSYS;
+}
+
+static int set_time_window_us(struct powercap_zone *pcz, int cid, u64 window)
+{
+	return -ENOSYS;
+}
+
+static int get_max_power_range_uw(struct powercap_zone *pcz, u64 *max_power_uw)
+{
+	struct dtpm *dtpm = to_dtpm(pcz);
+
+	*max_power_uw = dtpm->power_max - dtpm->power_min;
+
+	return 0;
+}
+
+static int __get_power_uw(struct dtpm *dtpm, u64 *power_uw)
+{
+	struct dtpm *child;
+	u64 power;
+	int ret = 0;
+
+	if (dtpm->ops) {
+		*power_uw = dtpm->ops->get_power_uw(dtpm);
+		return 0;
+	}
+
+	*power_uw = 0;
+
+	list_for_each_entry(child, &dtpm->children, sibling) {
+		ret = __get_power_uw(child, &power);
+		if (ret)
+			break;
+		*power_uw += power;
+	}
+
+	return ret;
+}
+
+static int get_power_uw(struct powercap_zone *pcz, u64 *power_uw)
+{
+	return __get_power_uw(to_dtpm(pcz), power_uw);
+}
+
+static void __dtpm_rebalance_weight(struct dtpm *dtpm)
+{
+	struct dtpm *child;
+
+	list_for_each_entry(child, &dtpm->children, sibling) {
+
+		pr_debug("Setting weight '%d' for '%s'\n",
+			 child->weight, child->zone.name);
+
+		child->weight = DIV64_U64_ROUND_CLOSEST(
+			child->power_max * 1024, dtpm->power_max);
+
+		__dtpm_rebalance_weight(child);
+	}
+}
+
+static void __dtpm_sub_power(struct dtpm *dtpm)
+{
+	struct dtpm *parent = dtpm->parent;
+
+	while (parent) {
+		parent->power_min -= dtpm->power_min;
+		parent->power_max -= dtpm->power_max;
+		parent->power_limit -= dtpm->power_limit;
+		parent = parent->parent;
+	}
+}
+
+static void __dtpm_add_power(struct dtpm *dtpm)
+{
+	struct dtpm *parent = dtpm->parent;
+
+	while (parent) {
+		parent->power_min += dtpm->power_min;
+		parent->power_max += dtpm->power_max;
+		parent->power_limit += dtpm->power_limit;
+		parent = parent->parent;
+	}
+}
+
+/**
+ * dtpm_update_power - Update the power on the dtpm
+ * @dtpm: a pointer to a dtpm structure to update
+ *
+ * Function to update the power values of the dtpm node specified in
+ * parameter. These new values will be propagated to the tree.
+ *
+ * Return: zero on success, -EINVAL if the values are inconsistent
+ */
+int dtpm_update_power(struct dtpm *dtpm)
+{
+	int ret;
+
+	__dtpm_sub_power(dtpm);
+
+	ret = dtpm->ops->update_power_uw(dtpm);
+	if (ret)
+		pr_err("Failed to update power for '%s': %d\n",
+		       dtpm->zone.name, ret);
+
+	if (!test_bit(DTPM_POWER_LIMIT_FLAG, &dtpm->flags))
+		dtpm->power_limit = dtpm->power_max;
+
+	__dtpm_add_power(dtpm);
+
+	if (root)
+		__dtpm_rebalance_weight(root);
+
+	return ret;
+}
+
+/**
+ * dtpm_release_zone - Cleanup when the node is released
+ * @pcz: a pointer to a powercap_zone structure
+ *
+ * Do some housecleaning and update the weight on the tree. The
+ * release will be denied if the node has children. This function must
+ * be called by the specific release callback of the different
+ * backends.
+ *
+ * Return: 0 on success, -EBUSY if there are children
+ */
+int dtpm_release_zone(struct powercap_zone *pcz)
+{
+	struct dtpm *dtpm = to_dtpm(pcz);
+	struct dtpm *parent = dtpm->parent;
+
+	if (!list_empty(&dtpm->children))
+		return -EBUSY;
+
+	if (parent)
+		list_del(&dtpm->sibling);
+
+	__dtpm_sub_power(dtpm);
+
+	if (dtpm->ops)
+		dtpm->ops->release(dtpm);
+	else
+		kfree(dtpm);
+
+	return 0;
+}
+
+static int get_power_limit_uw(struct powercap_zone *pcz,
+			      int cid, u64 *power_limit)
+{
+	*power_limit = to_dtpm(pcz)->power_limit;
+	
+	return 0;
+}
+
+/*
+ * Set the power limit on the nodes, the power limit is distributed
+ * given the weight of the children.
+ *
+ * The dtpm node lock must be held when calling this function.
+ */
+static int __set_power_limit_uw(struct dtpm *dtpm, int cid, u64 power_limit)
+{
+	struct dtpm *child;
+	int ret = 0;
+	u64 power;
+
+	/*
+	 * A max power limitation means we remove the power limit,
+	 * otherwise we set a constraint and flag the dtpm node.
+	 */
+	if (power_limit == dtpm->power_max) {
+		clear_bit(DTPM_POWER_LIMIT_FLAG, &dtpm->flags);
+	} else {
+		set_bit(DTPM_POWER_LIMIT_FLAG, &dtpm->flags);
+	}
+
+	pr_debug("Setting power limit for '%s': %llu uW\n",
+		 dtpm->zone.name, power_limit);
+
+	/*
+	 * Only leaves of the dtpm tree has ops to get/set the power
+	 */
+	if (dtpm->ops) {
+		dtpm->power_limit = dtpm->ops->set_power_uw(dtpm, power_limit);
+	} else {
+		dtpm->power_limit = 0;
+
+		list_for_each_entry(child, &dtpm->children, sibling) {
+
+			/*
+			 * Integer division rounding will inevitably
+			 * lead to a different min or max value when
+			 * set several times. In order to restore the
+			 * initial value, we force the child's min or
+			 * max power every time if the constraint is
+			 * at the boundaries.
+			 */
+			if (power_limit == dtpm->power_max) {
+				power = child->power_max;
+			} else if (power_limit == dtpm->power_min) {
+				power = child->power_min;
+			} else {
+				power = DIV_ROUND_CLOSEST_ULL(
+					power_limit * child->weight, 1024);
+			}
+
+			pr_debug("Setting power limit for '%s': %llu uW\n",
+				 child->zone.name, power);
+
+			ret = __set_power_limit_uw(child, cid, power);
+			if (!ret)
+				ret = get_power_limit_uw(&child->zone, cid, &power);
+
+			if (ret)
+				break;
+
+			dtpm->power_limit += power;
+		}
+	}
+
+	return ret;
+}
+
+static int set_power_limit_uw(struct powercap_zone *pcz,
+			      int cid, u64 power_limit)
+{
+	struct dtpm *dtpm = to_dtpm(pcz);
+	int ret;
+
+	/*
+	 * Don't allow values outside of the power range previously
+	 * set when initializing the power numbers.
+	 */
+	power_limit = clamp_val(power_limit, dtpm->power_min, dtpm->power_max);
+
+	ret = __set_power_limit_uw(dtpm, cid, power_limit);
+
+	pr_debug("%s: power limit: %llu uW, power max: %llu uW\n",
+		 dtpm->zone.name, dtpm->power_limit, dtpm->power_max);
+
+	return ret;
+}
+
+static const char *get_constraint_name(struct powercap_zone *pcz, int cid)
+{
+	return constraint_name[cid];
+}
+
+static int get_max_power_uw(struct powercap_zone *pcz, int id, u64 *max_power)
+{
+	*max_power = to_dtpm(pcz)->power_max;
+
+	return 0;
+}
+
+static struct powercap_zone_constraint_ops constraint_ops = {
+	.set_power_limit_uw = set_power_limit_uw,
+	.get_power_limit_uw = get_power_limit_uw,
+	.set_time_window_us = set_time_window_us,
+	.get_time_window_us = get_time_window_us,
+	.get_max_power_uw = get_max_power_uw,
+	.get_name = get_constraint_name,
+};
+
+static struct powercap_zone_ops zone_ops = {
+	.get_max_power_range_uw = get_max_power_range_uw,
+	.get_power_uw = get_power_uw,
+	.release = dtpm_release_zone,
+};
+
+/**
+ * dtpm_init - Allocate and initialize a dtpm struct
+ * @dtpm: The dtpm struct pointer to be initialized
+ * @ops: The dtpm device specific ops, NULL for a virtual node
+ */
+void dtpm_init(struct dtpm *dtpm, struct dtpm_ops *ops)
+{
+	if (dtpm) {
+		INIT_LIST_HEAD(&dtpm->children);
+		INIT_LIST_HEAD(&dtpm->sibling);
+		dtpm->weight = 1024;
+		dtpm->ops = ops;
+	}
+}
+
+/**
+ * dtpm_unregister - Unregister a dtpm node from the hierarchy tree
+ * @dtpm: a pointer to a dtpm structure corresponding to the node to be removed
+ *
+ * Call the underlying powercap unregister function. That will call
+ * the release callback of the powercap zone.
+ */
+void dtpm_unregister(struct dtpm *dtpm)
+{
+	powercap_unregister_zone(pct, &dtpm->zone);
+
+	pr_debug("Unregistered dtpm node '%s'\n", dtpm->zone.name);
+}
+
+/**
+ * dtpm_register - Register a dtpm node in the hierarchy tree
+ * @name: a string specifying the name of the node
+ * @dtpm: a pointer to a dtpm structure corresponding to the new node
+ * @parent: a pointer to a dtpm structure corresponding to the parent node
+ *
+ * Create a dtpm node in the tree. If no parent is specified, the node
+ * is the root node of the hierarchy. If the root node already exists,
+ * then the registration will fail. The powercap controller must be
+ * initialized before calling this function.
+ *
+ * The dtpm structure must be initialized with the power numbers
+ * before calling this function.
+ *
+ * Return: zero on success, a negative value in case of error:
+ *  -EAGAIN: the function is called before the framework is initialized.
+ *  -EBUSY: the root node is already inserted
+ *  -EINVAL: * there is no root node yet and @parent is specified
+ *           * no all ops are defined
+ *           * parent have ops which are reserved for leaves
+ *   Other negative values are reported back from the powercap framework
+ */
+int dtpm_register(const char *name, struct dtpm *dtpm, struct dtpm *parent)
+{
+	struct powercap_zone *pcz;
+
+	if (!pct)
+		return -EAGAIN;
+
+	if (root && !parent)
+		return -EBUSY;
+
+	if (!root && parent)
+		return -EINVAL;
+
+	if (parent && parent->ops)
+		return -EINVAL;
+
+	if (!dtpm)
+		return -EINVAL;
+
+	if (dtpm->ops && !(dtpm->ops->set_power_uw &&
+			   dtpm->ops->get_power_uw &&
+			   dtpm->ops->update_power_uw &&
+			   dtpm->ops->release))
+		return -EINVAL;
+
+	pcz = powercap_register_zone(&dtpm->zone, pct, name,
+				     parent ? &parent->zone : NULL,
+				     &zone_ops, MAX_DTPM_CONSTRAINTS,
+				     &constraint_ops);
+	if (IS_ERR(pcz))
+		return PTR_ERR(pcz);
+
+	if (parent) {
+		list_add_tail(&dtpm->sibling, &parent->children);
+		dtpm->parent = parent;
+	} else {
+		root = dtpm;
+	}
+
+	if (dtpm->ops && !dtpm->ops->update_power_uw(dtpm)) {
+		__dtpm_add_power(dtpm);
+		dtpm->power_limit = dtpm->power_max;
+	}
+
+	pr_debug("Registered dtpm node '%s' / %llu-%llu uW, \n",
+		 dtpm->zone.name, dtpm->power_min, dtpm->power_max);
+
+	return 0;
+}
+
+static struct dtpm *dtpm_setup_virtual(const struct dtpm_node *hierarchy,
+				       struct dtpm *parent)
+{
+	struct dtpm *dtpm;
+	int ret;
+
+	dtpm = kzalloc(sizeof(*dtpm), GFP_KERNEL);
+	if (!dtpm)
+		return ERR_PTR(-ENOMEM);
+	dtpm_init(dtpm, NULL);
+
+	ret = dtpm_register(hierarchy->name, dtpm, parent);
+	if (ret) {
+		pr_err("Failed to register dtpm node '%s': %d\n",
+		       hierarchy->name, ret);
+		kfree(dtpm);
+		return ERR_PTR(ret);
+	}
+
+	return dtpm;
+}
+
+static struct dtpm *dtpm_setup_dt(const struct dtpm_node *hierarchy,
+				  struct dtpm *parent)
+{
+	struct device_node *np;
+	int i, ret;
+
+	np = of_find_node_by_path(hierarchy->name);
+	if (!np) {
+		pr_err("Failed to find '%s'\n", hierarchy->name);
+		return ERR_PTR(-ENXIO);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(dtpm_subsys); i++) {
+
+		if (!dtpm_subsys[i]->setup)
+			continue;
+
+		ret = dtpm_subsys[i]->setup(parent, np);
+		if (ret) {
+			pr_err("Failed to setup '%s': %d\n", dtpm_subsys[i]->name, ret);
+			of_node_put(np);
+			return ERR_PTR(ret);
+		}
+	}
+
+	of_node_put(np);
+
+	/*
+	 * By returning a NULL pointer, we let know the caller there
+	 * is no child for us as we are a leaf of the tree
+	 */
+	return NULL;
+}
+
+typedef struct dtpm * (*dtpm_node_callback_t)(const struct dtpm_node *, struct dtpm *);
+
+static dtpm_node_callback_t dtpm_node_callback[] = {
+	[DTPM_NODE_VIRTUAL] = dtpm_setup_virtual,
+	[DTPM_NODE_DT] = dtpm_setup_dt,
+};
+
+static int dtpm_for_each_child(const struct dtpm_node *hierarchy,
+			       const struct dtpm_node *it, struct dtpm *parent)
+{
+	struct dtpm *dtpm;
+	int i, ret;
+
+	for (i = 0; hierarchy[i].name; i++) {
+
+		if (hierarchy[i].parent != it)
+			continue;
+
+		dtpm = dtpm_node_callback[hierarchy[i].type](&hierarchy[i], parent);
+
+		/*
+		 * A NULL pointer means there is no children, hence we
+		 * continue without going deeper in the recursivity.
+		 */
+		if (!dtpm)
+			continue;
+
+		/*
+		 * There are multiple reasons why the callback could
+		 * fail. The generic glue is abstracting the backend
+		 * and therefore it is not possible to report back or
+		 * take a decision based on the error.  In any case,
+		 * if this call fails, it is not critical in the
+		 * hierarchy creation, we can assume the underlying
+		 * service is not found, so we continue without this
+		 * branch in the tree but with a warning to log the
+		 * information the node was not created.
+		 */
+		if (IS_ERR(dtpm)) {
+			pr_warn("Failed to create '%s' in the hierarchy\n",
+				hierarchy[i].name);
+			continue;
+		}
+
+		ret = dtpm_for_each_child(hierarchy, &hierarchy[i], dtpm);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * dtpm_create_hierarchy - Create the dtpm hierarchy
+ * @hierarchy: An array of struct dtpm_node describing the hierarchy
+ *
+ * The function is called by the platform specific code with the
+ * description of the different node in the hierarchy. It creates the
+ * tree in the sysfs filesystem under the powercap dtpm entry.
+ *
+ * The expected tree has the format:
+ *
+ * struct dtpm_node hierarchy[] = {
+ *	[0] { .name = "topmost", type =  DTPM_NODE_VIRTUAL },
+ *	[1] { .name = "package", .type = DTPM_NODE_VIRTUAL, .parent = &hierarchy[0] },
+ *	[2] { .name = "/cpus/cpu0", .type = DTPM_NODE_DT, .parent = &hierarchy[1] },
+ *	[3] { .name = "/cpus/cpu1", .type = DTPM_NODE_DT, .parent = &hierarchy[1] },
+ *	[4] { .name = "/cpus/cpu2", .type = DTPM_NODE_DT, .parent = &hierarchy[1] },
+ *	[5] { .name = "/cpus/cpu3", .type = DTPM_NODE_DT, .parent = &hierarchy[1] },
+ *	[6] { }
+ * };
+ *
+ * The last element is always an empty one and marks the end of the
+ * array.
+ *
+ * Return: zero on success, a negative value in case of error. Errors
+ * are reported back from the underlying functions.
+ */
+int dtpm_create_hierarchy(struct of_device_id *dtpm_match_table)
+{
+	const struct of_device_id *match;
+	const struct dtpm_node *hierarchy;
+	struct device_node *np;
+	int i, ret;
+
+	mutex_lock(&dtpm_lock);
+
+	if (pct) {
+		ret = -EBUSY;
+		goto out_unlock;
+	}
+
+	pct = powercap_register_control_type(NULL, "dtpm", NULL);
+	if (IS_ERR(pct)) {
+		pr_err("Failed to register control type\n");
+		ret = PTR_ERR(pct);
+		goto out_pct;
+	}
+
+	ret = -ENODEV;
+	np = of_find_node_by_path("/");
+	if (!np)
+		goto out_err;
+
+	match = of_match_node(dtpm_match_table, np);
+
+	of_node_put(np);
+
+	if (!match)
+		goto out_err;
+
+	hierarchy = match->data;
+	if (!hierarchy) {
+		ret = -EFAULT;
+		goto out_err;
+	}
+
+	ret = dtpm_for_each_child(hierarchy, NULL, NULL);
+	if (ret)
+		goto out_err;
+	
+	for (i = 0; i < ARRAY_SIZE(dtpm_subsys); i++) {
+
+		if (!dtpm_subsys[i]->init)
+			continue;
+
+		ret = dtpm_subsys[i]->init();
+		if (ret)
+			pr_info("Failed to initialize '%s': %d",
+				dtpm_subsys[i]->name, ret);
+	}
+
+	mutex_unlock(&dtpm_lock);
+
+	return 0;
+
+out_err:
+	powercap_unregister_control_type(pct);
+out_pct:
+	pct = NULL;
+out_unlock:
+	mutex_unlock(&dtpm_lock);
+	
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dtpm_create_hierarchy);
+
+static void __dtpm_destroy_hierarchy(struct dtpm *dtpm)
+{
+	struct dtpm *child, *aux;
+
+	list_for_each_entry_safe(child, aux, &dtpm->children, sibling)
+		__dtpm_destroy_hierarchy(child);
+
+	/*
+	 * At this point, we know all children were removed from the
+	 * recursive call before
+	 */
+	dtpm_unregister(dtpm);
+}
+
+void dtpm_destroy_hierarchy(void)
+{
+	int i;
+
+	mutex_lock(&dtpm_lock);
+
+	if (!pct)
+		goto out_unlock;
+
+	__dtpm_destroy_hierarchy(root);
+	
+
+	for (i = 0; i < ARRAY_SIZE(dtpm_subsys); i++) {
+
+		if (!dtpm_subsys[i]->exit)
+			continue;
+
+		dtpm_subsys[i]->exit();
+	}
+
+	powercap_unregister_control_type(pct);
+
+	pct = NULL;
+
+	root = NULL;
+
+out_unlock:
+	mutex_unlock(&dtpm_lock);
+}
+EXPORT_SYMBOL_GPL(dtpm_destroy_hierarchy);
diff --git a/drivers/powercap/dtpm_cpu.c b/drivers/powercap/dtpm_cpu.c
new file mode 100644
index 000000000..9193c3b8e
--- /dev/null
+++ b/drivers/powercap/dtpm_cpu.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2020 Linaro Limited
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
+ * The DTPM CPU is based on the energy model. It hooks the CPU in the
+ * DTPM tree which in turns update the power number by propagating the
+ * power number from the CPU energy model information to the parents.
+ *
+ * The association between the power and the performance state, allows
+ * to set the power of the CPU at the OPP granularity.
+ *
+ * The CPU hotplug is supported and the power numbers will be updated
+ * if a CPU is hot plugged / unplugged.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpumask.h>
+#include <linux/cpufreq.h>
+#include <linux/cpuhotplug.h>
+#include <linux/dtpm.h>
+#include <linux/energy_model.h>
+#include <linux/of.h>
+#include <linux/pm_qos.h>
+#include <linux/slab.h>
+
+struct dtpm_cpu {
+	struct dtpm dtpm;
+	struct freq_qos_request qos_req;
+	int cpu;
+};
+
+static DEFINE_PER_CPU(struct dtpm_cpu *, dtpm_per_cpu);
+
+static struct dtpm_cpu *to_dtpm_cpu(struct dtpm *dtpm)
+{
+	return container_of(dtpm, struct dtpm_cpu, dtpm);
+}
+
+static u64 set_pd_power_limit(struct dtpm *dtpm, u64 power_limit)
+{
+	struct dtpm_cpu *dtpm_cpu = to_dtpm_cpu(dtpm);
+	struct em_perf_domain *pd = em_cpu_get(dtpm_cpu->cpu);
+	struct cpumask cpus;
+	unsigned long freq;
+	u64 power;
+	int i, nr_cpus;
+
+	cpumask_and(&cpus, cpu_online_mask, to_cpumask(pd->cpus));
+	nr_cpus = cpumask_weight(&cpus);
+
+	for (i = 0; i < pd->nr_perf_states; i++) {
+
+		power = pd->table[i].power * nr_cpus;
+
+		if (power > power_limit)
+			break;
+	}
+
+	freq = pd->table[i - 1].frequency;
+
+	freq_qos_update_request(&dtpm_cpu->qos_req, freq);
+
+	power_limit = pd->table[i - 1].power * nr_cpus;
+
+	return power_limit;
+}
+
+static u64 scale_pd_power_uw(struct cpumask *pd_mask, u64 power)
+{
+	unsigned long max, sum_util = 0;
+	int cpu;
+
+	/*
+	 * The capacity is the same for all CPUs belonging to
+	 * the same perf domain.
+	 */
+	max = arch_scale_cpu_capacity(cpumask_first(pd_mask));
+
+	for_each_cpu_and(cpu, pd_mask, cpu_online_mask)
+		sum_util += sched_cpu_util(cpu);
+
+	return (power * ((sum_util << 10) / max)) >> 10;
+}
+
+static u64 get_pd_power_uw(struct dtpm *dtpm)
+{
+	struct dtpm_cpu *dtpm_cpu = to_dtpm_cpu(dtpm);
+	struct em_perf_domain *pd;
+	struct cpumask *pd_mask;
+	unsigned long freq;
+	int i;
+
+	pd = em_cpu_get(dtpm_cpu->cpu);
+
+	pd_mask = em_span_cpus(pd);
+
+	freq = cpufreq_quick_get(dtpm_cpu->cpu);
+
+	for (i = 0; i < pd->nr_perf_states; i++) {
+
+		if (pd->table[i].frequency < freq)
+			continue;
+
+		return scale_pd_power_uw(pd_mask, pd->table[i].power);
+	}
+
+	return 0;
+}
+
+static int update_pd_power_uw(struct dtpm *dtpm)
+{
+	struct dtpm_cpu *dtpm_cpu = to_dtpm_cpu(dtpm);
+	struct em_perf_domain *em = em_cpu_get(dtpm_cpu->cpu);
+	struct cpumask cpus;
+	int nr_cpus;
+
+	cpumask_and(&cpus, cpu_online_mask, to_cpumask(em->cpus));
+	nr_cpus = cpumask_weight(&cpus);
+
+	dtpm->power_min = em->table[0].power;
+	dtpm->power_min *= nr_cpus;
+
+	dtpm->power_max = em->table[em->nr_perf_states - 1].power;
+	dtpm->power_max *= nr_cpus;
+
+	return 0;
+}
+
+static void pd_release(struct dtpm *dtpm)
+{
+	struct dtpm_cpu *dtpm_cpu = to_dtpm_cpu(dtpm);
+	struct cpufreq_policy *policy;
+
+	if (freq_qos_request_active(&dtpm_cpu->qos_req))
+		freq_qos_remove_request(&dtpm_cpu->qos_req);
+
+	policy = cpufreq_cpu_get(dtpm_cpu->cpu);
+	if (policy) {
+		for_each_cpu(dtpm_cpu->cpu, policy->related_cpus)
+			per_cpu(dtpm_per_cpu, dtpm_cpu->cpu) = NULL;
+
+		cpufreq_cpu_put(policy);
+	}
+	
+	kfree(dtpm_cpu);
+}
+
+static struct dtpm_ops dtpm_ops = {
+	.set_power_uw	 = set_pd_power_limit,
+	.get_power_uw	 = get_pd_power_uw,
+	.update_power_uw = update_pd_power_uw,
+	.release	 = pd_release,
+};
+
+static int cpuhp_dtpm_cpu_offline(unsigned int cpu)
+{
+	struct dtpm_cpu *dtpm_cpu;
+
+	dtpm_cpu = per_cpu(dtpm_per_cpu, cpu);
+	if (dtpm_cpu)
+		dtpm_update_power(&dtpm_cpu->dtpm);
+
+	return 0;
+}
+
+static int cpuhp_dtpm_cpu_online(unsigned int cpu)
+{
+	struct dtpm_cpu *dtpm_cpu;
+
+	dtpm_cpu = per_cpu(dtpm_per_cpu, cpu);
+	if (dtpm_cpu)
+		return dtpm_update_power(&dtpm_cpu->dtpm);
+
+	return 0;
+}
+
+static int __dtpm_cpu_setup(int cpu, struct dtpm *parent)
+{
+	struct dtpm_cpu *dtpm_cpu;
+	struct cpufreq_policy *policy;
+	struct em_perf_domain *pd;
+	char name[CPUFREQ_NAME_LEN];
+	int ret = -ENOMEM;
+
+	dtpm_cpu = per_cpu(dtpm_per_cpu, cpu);
+	if (dtpm_cpu)
+		return 0;
+
+	policy = cpufreq_cpu_get(cpu);
+	if (!policy)
+		return 0;
+
+	pd = em_cpu_get(cpu);
+	if (!pd || em_is_artificial(pd)) {
+		ret = -EINVAL;
+		goto release_policy;
+	}
+
+	dtpm_cpu = kzalloc(sizeof(*dtpm_cpu), GFP_KERNEL);
+	if (!dtpm_cpu) {
+		ret = -ENOMEM;
+		goto release_policy;
+	}
+
+	dtpm_init(&dtpm_cpu->dtpm, &dtpm_ops);
+	dtpm_cpu->cpu = cpu;
+
+	for_each_cpu(cpu, policy->related_cpus)
+		per_cpu(dtpm_per_cpu, cpu) = dtpm_cpu;
+
+	snprintf(name, sizeof(name), "cpu%d-cpufreq", dtpm_cpu->cpu);
+
+	ret = dtpm_register(name, &dtpm_cpu->dtpm, parent);
+	if (ret)
+		goto out_kfree_dtpm_cpu;
+
+	ret = freq_qos_add_request(&policy->constraints,
+				   &dtpm_cpu->qos_req, FREQ_QOS_MAX,
+				   pd->table[pd->nr_perf_states - 1].frequency);
+	if (ret)
+		goto out_dtpm_unregister;
+
+	cpufreq_cpu_put(policy);
+	return 0;
+
+out_dtpm_unregister:
+	dtpm_unregister(&dtpm_cpu->dtpm);
+	dtpm_cpu = NULL;
+
+out_kfree_dtpm_cpu:
+	for_each_cpu(cpu, policy->related_cpus)
+		per_cpu(dtpm_per_cpu, cpu) = NULL;
+	kfree(dtpm_cpu);
+
+release_policy:
+	cpufreq_cpu_put(policy);
+	return ret;
+}
+
+static int dtpm_cpu_setup(struct dtpm *dtpm, struct device_node *np)
+{
+	int cpu;
+
+	cpu = of_cpu_node_to_id(np);
+	if (cpu < 0)
+		return 0;
+
+	return __dtpm_cpu_setup(cpu, dtpm);
+}
+
+static int dtpm_cpu_init(void)
+{
+	int ret;
+
+	/*
+	 * The callbacks at CPU hotplug time are calling
+	 * dtpm_update_power() which in turns calls update_pd_power().
+	 *
+	 * The function update_pd_power() uses the online mask to
+	 * figure out the power consumption limits.
+	 *
+	 * At CPUHP_AP_ONLINE_DYN, the CPU is present in the CPU
+	 * online mask when the cpuhp_dtpm_cpu_online function is
+	 * called, but the CPU is still in the online mask for the
+	 * tear down callback. So the power can not be updated when
+	 * the CPU is unplugged.
+	 *
+	 * At CPUHP_AP_DTPM_CPU_DEAD, the situation is the opposite as
+	 * above. The CPU online mask is not up to date when the CPU
+	 * is plugged in.
+	 *
+	 * For this reason, we need to call the online and offline
+	 * callbacks at different moments when the CPU online mask is
+	 * consistent with the power numbers we want to update.
+	 */
+	ret = cpuhp_setup_state(CPUHP_AP_DTPM_CPU_DEAD, "dtpm_cpu:offline",
+				NULL, cpuhp_dtpm_cpu_offline);
+	if (ret < 0)
+		return ret;
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "dtpm_cpu:online",
+				cpuhp_dtpm_cpu_online, NULL);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void dtpm_cpu_exit(void)
+{
+	cpuhp_remove_state_nocalls(CPUHP_AP_ONLINE_DYN);
+	cpuhp_remove_state_nocalls(CPUHP_AP_DTPM_CPU_DEAD);
+}
+
+struct dtpm_subsys_ops dtpm_cpu_ops = {
+	.name = KBUILD_MODNAME,
+	.init = dtpm_cpu_init,
+	.exit = dtpm_cpu_exit,
+	.setup = dtpm_cpu_setup,
+};
diff --git a/drivers/powercap/dtpm_devfreq.c b/drivers/powercap/dtpm_devfreq.c
new file mode 100644
index 000000000..612c3b59d
--- /dev/null
+++ b/drivers/powercap/dtpm_devfreq.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2021 Linaro Limited
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
+ * The devfreq device combined with the energy model and the load can
+ * give an estimation of the power consumption as well as limiting the
+ * power.
+ *
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpumask.h>
+#include <linux/devfreq.h>
+#include <linux/dtpm.h>
+#include <linux/energy_model.h>
+#include <linux/of.h>
+#include <linux/pm_qos.h>
+#include <linux/slab.h>
+#include <linux/units.h>
+
+struct dtpm_devfreq {
+	struct dtpm dtpm;
+	struct dev_pm_qos_request qos_req;
+	struct devfreq *devfreq;
+};
+
+static struct dtpm_devfreq *to_dtpm_devfreq(struct dtpm *dtpm)
+{
+	return container_of(dtpm, struct dtpm_devfreq, dtpm);
+}
+
+static int update_pd_power_uw(struct dtpm *dtpm)
+{
+	struct dtpm_devfreq *dtpm_devfreq = to_dtpm_devfreq(dtpm);
+	struct devfreq *devfreq = dtpm_devfreq->devfreq;
+	struct device *dev = devfreq->dev.parent;
+	struct em_perf_domain *pd = em_pd_get(dev);
+
+	dtpm->power_min = pd->table[0].power;
+
+	dtpm->power_max = pd->table[pd->nr_perf_states - 1].power;
+
+	return 0;
+}
+
+static u64 set_pd_power_limit(struct dtpm *dtpm, u64 power_limit)
+{
+	struct dtpm_devfreq *dtpm_devfreq = to_dtpm_devfreq(dtpm);
+	struct devfreq *devfreq = dtpm_devfreq->devfreq;
+	struct device *dev = devfreq->dev.parent;
+	struct em_perf_domain *pd = em_pd_get(dev);
+	unsigned long freq;
+	int i;
+
+	for (i = 0; i < pd->nr_perf_states; i++) {
+		if (pd->table[i].power > power_limit)
+			break;
+	}
+
+	freq = pd->table[i - 1].frequency;
+
+	dev_pm_qos_update_request(&dtpm_devfreq->qos_req, freq);
+
+	power_limit = pd->table[i - 1].power;
+
+	return power_limit;
+}
+
+static void _normalize_load(struct devfreq_dev_status *status)
+{
+	if (status->total_time > 0xfffff) {
+		status->total_time >>= 10;
+		status->busy_time >>= 10;
+	}
+
+	status->busy_time <<= 10;
+	status->busy_time /= status->total_time ? : 1;
+
+	status->busy_time = status->busy_time ? : 1;
+	status->total_time = 1024;
+}
+
+static u64 get_pd_power_uw(struct dtpm *dtpm)
+{
+	struct dtpm_devfreq *dtpm_devfreq = to_dtpm_devfreq(dtpm);
+	struct devfreq *devfreq = dtpm_devfreq->devfreq;
+	struct device *dev = devfreq->dev.parent;
+	struct em_perf_domain *pd = em_pd_get(dev);
+	struct devfreq_dev_status status;
+	unsigned long freq;
+	u64 power;
+	int i;
+
+	mutex_lock(&devfreq->lock);
+	status = devfreq->last_status;
+	mutex_unlock(&devfreq->lock);
+
+	freq = DIV_ROUND_UP(status.current_frequency, HZ_PER_KHZ);
+	_normalize_load(&status);
+
+	for (i = 0; i < pd->nr_perf_states; i++) {
+
+		if (pd->table[i].frequency < freq)
+			continue;
+
+		power = pd->table[i].power;
+		power *= status.busy_time;
+		power >>= 10;
+
+		return power;
+	}
+
+	return 0;
+}
+
+static void pd_release(struct dtpm *dtpm)
+{
+	struct dtpm_devfreq *dtpm_devfreq = to_dtpm_devfreq(dtpm);
+
+	if (dev_pm_qos_request_active(&dtpm_devfreq->qos_req))
+		dev_pm_qos_remove_request(&dtpm_devfreq->qos_req);
+
+	kfree(dtpm_devfreq);
+}
+
+static struct dtpm_ops dtpm_ops = {
+	.set_power_uw = set_pd_power_limit,
+	.get_power_uw = get_pd_power_uw,
+	.update_power_uw = update_pd_power_uw,
+	.release = pd_release,
+};
+
+static int __dtpm_devfreq_setup(struct devfreq *devfreq, struct dtpm *parent)
+{
+	struct device *dev = devfreq->dev.parent;
+	struct dtpm_devfreq *dtpm_devfreq;
+	struct em_perf_domain *pd;
+	int ret = -ENOMEM;
+
+	pd = em_pd_get(dev);
+	if (!pd) {
+		ret = dev_pm_opp_of_register_em(dev, NULL);
+		if (ret) {
+			pr_err("No energy model available for '%s'\n", dev_name(dev));
+			return -EINVAL;
+		}
+	}
+
+	dtpm_devfreq = kzalloc(sizeof(*dtpm_devfreq), GFP_KERNEL);
+	if (!dtpm_devfreq)
+		return -ENOMEM;
+
+	dtpm_init(&dtpm_devfreq->dtpm, &dtpm_ops);
+
+	dtpm_devfreq->devfreq = devfreq;
+
+	ret = dtpm_register(dev_name(dev), &dtpm_devfreq->dtpm, parent);
+	if (ret) {
+		pr_err("Failed to register '%s': %d\n", dev_name(dev), ret);
+		kfree(dtpm_devfreq);
+		return ret;
+	}
+
+	ret = dev_pm_qos_add_request(dev, &dtpm_devfreq->qos_req,
+				     DEV_PM_QOS_MAX_FREQUENCY,
+				     PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE);
+	if (ret) {
+		pr_err("Failed to add QoS request: %d\n", ret);
+		goto out_dtpm_unregister;
+	}
+
+	dtpm_update_power(&dtpm_devfreq->dtpm);
+
+	return 0;
+
+out_dtpm_unregister:
+	dtpm_unregister(&dtpm_devfreq->dtpm);
+
+	return ret;
+}
+
+static int dtpm_devfreq_setup(struct dtpm *dtpm, struct device_node *np)
+{
+	struct devfreq *devfreq;
+
+	devfreq = devfreq_get_devfreq_by_node(np);
+	if (IS_ERR(devfreq))
+		return 0;
+
+	return __dtpm_devfreq_setup(devfreq, dtpm);
+}
+
+struct dtpm_subsys_ops dtpm_devfreq_ops = {
+	.name = KBUILD_MODNAME,
+	.setup = dtpm_devfreq_setup,
+};
diff --git a/drivers/powercap/dtpm_subsys.h b/drivers/powercap/dtpm_subsys.h
new file mode 100644
index 000000000..db1712938
--- /dev/null
+++ b/drivers/powercap/dtpm_subsys.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022 Linaro Ltd
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ */
+#ifndef ___DTPM_SUBSYS_H__
+#define ___DTPM_SUBSYS_H__
+
+extern struct dtpm_subsys_ops dtpm_cpu_ops;
+extern struct dtpm_subsys_ops dtpm_devfreq_ops;
+
+struct dtpm_subsys_ops *dtpm_subsys[] = {
+#ifdef CONFIG_DTPM_CPU
+	&dtpm_cpu_ops,
+#endif
+#ifdef CONFIG_DTPM_DEVFREQ
+	&dtpm_devfreq_ops,
+#endif
+};
+
+#endif
diff --git a/drivers/powercap/idle_inject.c b/drivers/powercap/idle_inject.c
new file mode 100644
index 000000000..999e218d7
--- /dev/null
+++ b/drivers/powercap/idle_inject.c
@@ -0,0 +1,370 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 Linaro Limited
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
+ * The idle injection framework provides a way to force CPUs to enter idle
+ * states for a specified fraction of time over a specified period.
+ *
+ * It relies on the smpboot kthreads feature providing common code for CPU
+ * hotplug and thread [un]parking.
+ *
+ * All of the kthreads used for idle injection are created at init time.
+ *
+ * Next, the users of the idle injection framework provide a cpumask via
+ * its register function. The kthreads will be synchronized with respect to
+ * this cpumask.
+ *
+ * The idle + run duration is specified via separate helpers and that allows
+ * idle injection to be started.
+ *
+ * The idle injection kthreads will call play_idle_precise() with the idle
+ * duration and max allowed latency specified as per the above.
+ *
+ * After all of them have been woken up, a timer is set to start the next idle
+ * injection cycle.
+ *
+ * The timer interrupt handler will wake up the idle injection kthreads for
+ * all of the CPUs in the cpumask provided by the user.
+ *
+ * Idle injection is stopped synchronously and no leftover idle injection
+ * kthread activity after its completion is guaranteed.
+ *
+ * It is up to the user of this framework to provide a lock for higher-level
+ * synchronization to prevent race conditions like starting idle injection
+ * while unregistering from the framework.
+ */
+#define pr_fmt(fmt) "ii_dev: " fmt
+
+#include <linux/cpu.h>
+#include <linux/hrtimer.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smpboot.h>
+#include <linux/idle_inject.h>
+
+#include <uapi/linux/sched/types.h>
+
+/**
+ * struct idle_inject_thread - task on/off switch structure
+ * @tsk: task injecting the idle cycles
+ * @should_run: whether or not to run the task (for the smpboot kthread API)
+ */
+struct idle_inject_thread {
+	struct task_struct *tsk;
+	int should_run;
+};
+
+/**
+ * struct idle_inject_device - idle injection data
+ * @timer: idle injection period timer
+ * @idle_duration_us: duration of CPU idle time to inject
+ * @run_duration_us: duration of CPU run time to allow
+ * @latency_us: max allowed latency
+ * @cpumask: mask of CPUs affected by idle injection
+ */
+struct idle_inject_device {
+	struct hrtimer timer;
+	unsigned int idle_duration_us;
+	unsigned int run_duration_us;
+	unsigned int latency_us;
+	unsigned long cpumask[];
+};
+
+static DEFINE_PER_CPU(struct idle_inject_thread, idle_inject_thread);
+static DEFINE_PER_CPU(struct idle_inject_device *, idle_inject_device);
+
+/**
+ * idle_inject_wakeup - Wake up idle injection threads
+ * @ii_dev: target idle injection device
+ *
+ * Every idle injection task associated with the given idle injection device
+ * and running on an online CPU will be woken up.
+ */
+static void idle_inject_wakeup(struct idle_inject_device *ii_dev)
+{
+	struct idle_inject_thread *iit;
+	unsigned int cpu;
+
+	for_each_cpu_and(cpu, to_cpumask(ii_dev->cpumask), cpu_online_mask) {
+		iit = per_cpu_ptr(&idle_inject_thread, cpu);
+		iit->should_run = 1;
+		wake_up_process(iit->tsk);
+	}
+}
+
+/**
+ * idle_inject_timer_fn - idle injection timer function
+ * @timer: idle injection hrtimer
+ *
+ * This function is called when the idle injection timer expires.  It wakes up
+ * idle injection tasks associated with the timer and they, in turn, invoke
+ * play_idle_precise() to inject a specified amount of CPU idle time.
+ *
+ * Return: HRTIMER_RESTART.
+ */
+static enum hrtimer_restart idle_inject_timer_fn(struct hrtimer *timer)
+{
+	unsigned int duration_us;
+	struct idle_inject_device *ii_dev =
+		container_of(timer, struct idle_inject_device, timer);
+
+	duration_us = READ_ONCE(ii_dev->run_duration_us);
+	duration_us += READ_ONCE(ii_dev->idle_duration_us);
+
+	idle_inject_wakeup(ii_dev);
+
+	hrtimer_forward_now(timer, ns_to_ktime(duration_us * NSEC_PER_USEC));
+
+	return HRTIMER_RESTART;
+}
+
+/**
+ * idle_inject_fn - idle injection work function
+ * @cpu: the CPU owning the task
+ *
+ * This function calls play_idle_precise() to inject a specified amount of CPU
+ * idle time.
+ */
+static void idle_inject_fn(unsigned int cpu)
+{
+	struct idle_inject_device *ii_dev;
+	struct idle_inject_thread *iit;
+
+	ii_dev = per_cpu(idle_inject_device, cpu);
+	iit = per_cpu_ptr(&idle_inject_thread, cpu);
+
+	/*
+	 * Let the smpboot main loop know that the task should not run again.
+	 */
+	iit->should_run = 0;
+
+	play_idle_precise(READ_ONCE(ii_dev->idle_duration_us) * NSEC_PER_USEC,
+			  READ_ONCE(ii_dev->latency_us) * NSEC_PER_USEC);
+}
+
+/**
+ * idle_inject_set_duration - idle and run duration update helper
+ * @run_duration_us: CPU run time to allow in microseconds
+ * @idle_duration_us: CPU idle time to inject in microseconds
+ */
+void idle_inject_set_duration(struct idle_inject_device *ii_dev,
+			      unsigned int run_duration_us,
+			      unsigned int idle_duration_us)
+{
+	if (run_duration_us && idle_duration_us) {
+		WRITE_ONCE(ii_dev->run_duration_us, run_duration_us);
+		WRITE_ONCE(ii_dev->idle_duration_us, idle_duration_us);
+	}
+}
+
+/**
+ * idle_inject_get_duration - idle and run duration retrieval helper
+ * @run_duration_us: memory location to store the current CPU run time
+ * @idle_duration_us: memory location to store the current CPU idle time
+ */
+void idle_inject_get_duration(struct idle_inject_device *ii_dev,
+			      unsigned int *run_duration_us,
+			      unsigned int *idle_duration_us)
+{
+	*run_duration_us = READ_ONCE(ii_dev->run_duration_us);
+	*idle_duration_us = READ_ONCE(ii_dev->idle_duration_us);
+}
+
+/**
+ * idle_inject_set_latency - set the maximum latency allowed
+ * @latency_us: set the latency requirement for the idle state
+ */
+void idle_inject_set_latency(struct idle_inject_device *ii_dev,
+			     unsigned int latency_us)
+{
+	WRITE_ONCE(ii_dev->latency_us, latency_us);
+}
+
+/**
+ * idle_inject_start - start idle injections
+ * @ii_dev: idle injection control device structure
+ *
+ * The function starts idle injection by first waking up all of the idle
+ * injection kthreads associated with @ii_dev to let them inject CPU idle time
+ * sets up a timer to start the next idle injection period.
+ *
+ * Return: -EINVAL if the CPU idle or CPU run time is not set or 0 on success.
+ */
+int idle_inject_start(struct idle_inject_device *ii_dev)
+{
+	unsigned int idle_duration_us = READ_ONCE(ii_dev->idle_duration_us);
+	unsigned int run_duration_us = READ_ONCE(ii_dev->run_duration_us);
+
+	if (!idle_duration_us || !run_duration_us)
+		return -EINVAL;
+
+	pr_debug("Starting injecting idle cycles on CPUs '%*pbl'\n",
+		 cpumask_pr_args(to_cpumask(ii_dev->cpumask)));
+
+	idle_inject_wakeup(ii_dev);
+
+	hrtimer_start(&ii_dev->timer,
+		      ns_to_ktime((idle_duration_us + run_duration_us) *
+				  NSEC_PER_USEC),
+		      HRTIMER_MODE_REL);
+
+	return 0;
+}
+
+/**
+ * idle_inject_stop - stops idle injections
+ * @ii_dev: idle injection control device structure
+ *
+ * The function stops idle injection and waits for the threads to finish work.
+ * If CPU idle time is being injected when this function runs, then it will
+ * wait until the end of the cycle.
+ *
+ * When it returns, there is no more idle injection kthread activity.  The
+ * kthreads are scheduled out and the periodic timer is off.
+ */
+void idle_inject_stop(struct idle_inject_device *ii_dev)
+{
+	struct idle_inject_thread *iit;
+	unsigned int cpu;
+
+	pr_debug("Stopping idle injection on CPUs '%*pbl'\n",
+		 cpumask_pr_args(to_cpumask(ii_dev->cpumask)));
+
+	hrtimer_cancel(&ii_dev->timer);
+
+	/*
+	 * Stopping idle injection requires all of the idle injection kthreads
+	 * associated with the given cpumask to be parked and stay that way, so
+	 * prevent CPUs from going online at this point.  Any CPUs going online
+	 * after the loop below will be covered by clearing the should_run flag
+	 * that will cause the smpboot main loop to schedule them out.
+	 */
+	cpu_hotplug_disable();
+
+	/*
+	 * Iterate over all (online + offline) CPUs here in case one of them
+	 * goes offline with the should_run flag set so as to prevent its idle
+	 * injection kthread from running when the CPU goes online again after
+	 * the ii_dev has been freed.
+	 */
+	for_each_cpu(cpu, to_cpumask(ii_dev->cpumask)) {
+		iit = per_cpu_ptr(&idle_inject_thread, cpu);
+		iit->should_run = 0;
+
+		wait_task_inactive(iit->tsk, TASK_ANY);
+	}
+
+	cpu_hotplug_enable();
+}
+
+/**
+ * idle_inject_setup - prepare the current task for idle injection
+ * @cpu: not used
+ *
+ * Called once, this function is in charge of setting the current task's
+ * scheduler parameters to make it an RT task.
+ */
+static void idle_inject_setup(unsigned int cpu)
+{
+	sched_set_fifo(current);
+}
+
+/**
+ * idle_inject_should_run - function helper for the smpboot API
+ * @cpu: CPU the kthread is running on
+ *
+ * Return: whether or not the thread can run.
+ */
+static int idle_inject_should_run(unsigned int cpu)
+{
+	struct idle_inject_thread *iit =
+		per_cpu_ptr(&idle_inject_thread, cpu);
+
+	return iit->should_run;
+}
+
+/**
+ * idle_inject_register - initialize idle injection on a set of CPUs
+ * @cpumask: CPUs to be affected by idle injection
+ *
+ * This function creates an idle injection control device structure for the
+ * given set of CPUs and initializes the timer associated with it.  It does not
+ * start any injection cycles.
+ *
+ * Return: NULL if memory allocation fails, idle injection control device
+ * pointer on success.
+ */
+struct idle_inject_device *idle_inject_register(struct cpumask *cpumask)
+{
+	struct idle_inject_device *ii_dev;
+	int cpu, cpu_rb;
+
+	ii_dev = kzalloc(sizeof(*ii_dev) + cpumask_size(), GFP_KERNEL);
+	if (!ii_dev)
+		return NULL;
+
+	cpumask_copy(to_cpumask(ii_dev->cpumask), cpumask);
+	hrtimer_init(&ii_dev->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	ii_dev->timer.function = idle_inject_timer_fn;
+	ii_dev->latency_us = UINT_MAX;
+
+	for_each_cpu(cpu, to_cpumask(ii_dev->cpumask)) {
+
+		if (per_cpu(idle_inject_device, cpu)) {
+			pr_err("cpu%d is already registered\n", cpu);
+			goto out_rollback;
+		}
+
+		per_cpu(idle_inject_device, cpu) = ii_dev;
+	}
+
+	return ii_dev;
+
+out_rollback:
+	for_each_cpu(cpu_rb, to_cpumask(ii_dev->cpumask)) {
+		if (cpu == cpu_rb)
+			break;
+		per_cpu(idle_inject_device, cpu_rb) = NULL;
+	}
+
+	kfree(ii_dev);
+
+	return NULL;
+}
+
+/**
+ * idle_inject_unregister - unregister idle injection control device
+ * @ii_dev: idle injection control device to unregister
+ *
+ * The function stops idle injection for the given control device,
+ * unregisters its kthreads and frees memory allocated when that device was
+ * created.
+ */
+void idle_inject_unregister(struct idle_inject_device *ii_dev)
+{
+	unsigned int cpu;
+
+	idle_inject_stop(ii_dev);
+
+	for_each_cpu(cpu, to_cpumask(ii_dev->cpumask))
+		per_cpu(idle_inject_device, cpu) = NULL;
+
+	kfree(ii_dev);
+}
+
+static struct smp_hotplug_thread idle_inject_threads = {
+	.store = &idle_inject_thread.tsk,
+	.setup = idle_inject_setup,
+	.thread_fn = idle_inject_fn,
+	.thread_comm = "idle_inject/%u",
+	.thread_should_run = idle_inject_should_run,
+};
+
+static int __init idle_inject_init(void)
+{
+	return smpboot_register_percpu_thread(&idle_inject_threads);
+}
+early_initcall(idle_inject_init);
diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c
new file mode 100644
index 000000000..26d00b185
--- /dev/null
+++ b/drivers/powercap/intel_rapl_common.c
@@ -0,0 +1,1561 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common code for Intel Running Average Power Limit (RAPL) support.
+ * Copyright (c) 2019, Intel Corporation.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/log2.h>
+#include <linux/bitmap.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/cpu.h>
+#include <linux/powercap.h>
+#include <linux/suspend.h>
+#include <linux/intel_rapl.h>
+#include <linux/processor.h>
+#include <linux/platform_device.h>
+
+#include <asm/iosf_mbi.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+/* bitmasks for RAPL MSRs, used by primitive access functions */
+#define ENERGY_STATUS_MASK      0xffffffff
+
+#define POWER_LIMIT1_MASK       0x7FFF
+#define POWER_LIMIT1_ENABLE     BIT(15)
+#define POWER_LIMIT1_CLAMP      BIT(16)
+
+#define POWER_LIMIT2_MASK       (0x7FFFULL<<32)
+#define POWER_LIMIT2_ENABLE     BIT_ULL(47)
+#define POWER_LIMIT2_CLAMP      BIT_ULL(48)
+#define POWER_HIGH_LOCK         BIT_ULL(63)
+#define POWER_LOW_LOCK          BIT(31)
+
+#define POWER_LIMIT4_MASK		0x1FFF
+
+#define TIME_WINDOW1_MASK       (0x7FULL<<17)
+#define TIME_WINDOW2_MASK       (0x7FULL<<49)
+
+#define POWER_UNIT_OFFSET	0
+#define POWER_UNIT_MASK		0x0F
+
+#define ENERGY_UNIT_OFFSET	0x08
+#define ENERGY_UNIT_MASK	0x1F00
+
+#define TIME_UNIT_OFFSET	0x10
+#define TIME_UNIT_MASK		0xF0000
+
+#define POWER_INFO_MAX_MASK     (0x7fffULL<<32)
+#define POWER_INFO_MIN_MASK     (0x7fffULL<<16)
+#define POWER_INFO_MAX_TIME_WIN_MASK     (0x3fULL<<48)
+#define POWER_INFO_THERMAL_SPEC_MASK     0x7fff
+
+#define PERF_STATUS_THROTTLE_TIME_MASK 0xffffffff
+#define PP_POLICY_MASK         0x1F
+
+/*
+ * SPR has different layout for Psys Domain PowerLimit registers.
+ * There are 17 bits of PL1 and PL2 instead of 15 bits.
+ * The Enable bits and TimeWindow bits are also shifted as a result.
+ */
+#define PSYS_POWER_LIMIT1_MASK       0x1FFFF
+#define PSYS_POWER_LIMIT1_ENABLE     BIT(17)
+
+#define PSYS_POWER_LIMIT2_MASK       (0x1FFFFULL<<32)
+#define PSYS_POWER_LIMIT2_ENABLE     BIT_ULL(49)
+
+#define PSYS_TIME_WINDOW1_MASK       (0x7FULL<<19)
+#define PSYS_TIME_WINDOW2_MASK       (0x7FULL<<51)
+
+/* Non HW constants */
+#define RAPL_PRIMITIVE_DERIVED       BIT(1)	/* not from raw data */
+#define RAPL_PRIMITIVE_DUMMY         BIT(2)
+
+#define TIME_WINDOW_MAX_MSEC 40000
+#define TIME_WINDOW_MIN_MSEC 250
+#define ENERGY_UNIT_SCALE    1000	/* scale from driver unit to powercap unit */
+enum unit_type {
+	ARBITRARY_UNIT,		/* no translation */
+	POWER_UNIT,
+	ENERGY_UNIT,
+	TIME_UNIT,
+};
+
+/* per domain data, some are optional */
+#define NR_RAW_PRIMITIVES (NR_RAPL_PRIMITIVES - 2)
+
+#define	DOMAIN_STATE_INACTIVE           BIT(0)
+#define	DOMAIN_STATE_POWER_LIMIT_SET    BIT(1)
+#define DOMAIN_STATE_BIOS_LOCKED        BIT(2)
+
+static const char pl1_name[] = "long_term";
+static const char pl2_name[] = "short_term";
+static const char pl4_name[] = "peak_power";
+
+#define power_zone_to_rapl_domain(_zone) \
+	container_of(_zone, struct rapl_domain, power_zone)
+
+struct rapl_defaults {
+	u8 floor_freq_reg_addr;
+	int (*check_unit)(struct rapl_package *rp, int cpu);
+	void (*set_floor_freq)(struct rapl_domain *rd, bool mode);
+	u64 (*compute_time_window)(struct rapl_package *rp, u64 val,
+				    bool to_raw);
+	unsigned int dram_domain_energy_unit;
+	unsigned int psys_domain_energy_unit;
+	bool spr_psys_bits;
+};
+static struct rapl_defaults *rapl_defaults;
+
+/* Sideband MBI registers */
+#define IOSF_CPU_POWER_BUDGET_CTL_BYT (0x2)
+#define IOSF_CPU_POWER_BUDGET_CTL_TNG (0xdf)
+
+#define PACKAGE_PLN_INT_SAVED   BIT(0)
+#define MAX_PRIM_NAME (32)
+
+/* per domain data. used to describe individual knobs such that access function
+ * can be consolidated into one instead of many inline functions.
+ */
+struct rapl_primitive_info {
+	const char *name;
+	u64 mask;
+	int shift;
+	enum rapl_domain_reg_id id;
+	enum unit_type unit;
+	u32 flag;
+};
+
+#define PRIMITIVE_INFO_INIT(p, m, s, i, u, f) {	\
+		.name = #p,			\
+		.mask = m,			\
+		.shift = s,			\
+		.id = i,			\
+		.unit = u,			\
+		.flag = f			\
+	}
+
+static void rapl_init_domains(struct rapl_package *rp);
+static int rapl_read_data_raw(struct rapl_domain *rd,
+			      enum rapl_primitives prim,
+			      bool xlate, u64 *data);
+static int rapl_write_data_raw(struct rapl_domain *rd,
+			       enum rapl_primitives prim,
+			       unsigned long long value);
+static u64 rapl_unit_xlate(struct rapl_domain *rd,
+			   enum unit_type type, u64 value, int to_raw);
+static void package_power_limit_irq_save(struct rapl_package *rp);
+
+static LIST_HEAD(rapl_packages);	/* guarded by CPU hotplug lock */
+
+static const char *const rapl_domain_names[] = {
+	"package",
+	"core",
+	"uncore",
+	"dram",
+	"psys",
+};
+
+static int get_energy_counter(struct powercap_zone *power_zone,
+			      u64 *energy_raw)
+{
+	struct rapl_domain *rd;
+	u64 energy_now;
+
+	/* prevent CPU hotplug, make sure the RAPL domain does not go
+	 * away while reading the counter.
+	 */
+	cpus_read_lock();
+	rd = power_zone_to_rapl_domain(power_zone);
+
+	if (!rapl_read_data_raw(rd, ENERGY_COUNTER, true, &energy_now)) {
+		*energy_raw = energy_now;
+		cpus_read_unlock();
+
+		return 0;
+	}
+	cpus_read_unlock();
+
+	return -EIO;
+}
+
+static int get_max_energy_counter(struct powercap_zone *pcd_dev, u64 *energy)
+{
+	struct rapl_domain *rd = power_zone_to_rapl_domain(pcd_dev);
+
+	*energy = rapl_unit_xlate(rd, ENERGY_UNIT, ENERGY_STATUS_MASK, 0);
+	return 0;
+}
+
+static int release_zone(struct powercap_zone *power_zone)
+{
+	struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone);
+	struct rapl_package *rp = rd->rp;
+
+	/* package zone is the last zone of a package, we can free
+	 * memory here since all children has been unregistered.
+	 */
+	if (rd->id == RAPL_DOMAIN_PACKAGE) {
+		kfree(rd);
+		rp->domains = NULL;
+	}
+
+	return 0;
+
+}
+
+static int find_nr_power_limit(struct rapl_domain *rd)
+{
+	int i, nr_pl = 0;
+
+	for (i = 0; i < NR_POWER_LIMITS; i++) {
+		if (rd->rpl[i].name)
+			nr_pl++;
+	}
+
+	return nr_pl;
+}
+
+static int set_domain_enable(struct powercap_zone *power_zone, bool mode)
+{
+	struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone);
+
+	if (rd->state & DOMAIN_STATE_BIOS_LOCKED)
+		return -EACCES;
+
+	cpus_read_lock();
+	rapl_write_data_raw(rd, PL1_ENABLE, mode);
+	if (rapl_defaults->set_floor_freq)
+		rapl_defaults->set_floor_freq(rd, mode);
+	cpus_read_unlock();
+
+	return 0;
+}
+
+static int get_domain_enable(struct powercap_zone *power_zone, bool *mode)
+{
+	struct rapl_domain *rd = power_zone_to_rapl_domain(power_zone);
+	u64 val;
+
+	if (rd->state & DOMAIN_STATE_BIOS_LOCKED) {
+		*mode = false;
+		return 0;
+	}
+	cpus_read_lock();
+	if (rapl_read_data_raw(rd, PL1_ENABLE, true, &val)) {
+		cpus_read_unlock();
+		return -EIO;
+	}
+	*mode = val;
+	cpus_read_unlock();
+
+	return 0;
+}
+
+/* per RAPL domain ops, in the order of rapl_domain_type */
+static const struct powercap_zone_ops zone_ops[] = {
+	/* RAPL_DOMAIN_PACKAGE */
+	{
+	 .get_energy_uj = get_energy_counter,
+	 .get_max_energy_range_uj = get_max_energy_counter,
+	 .release = release_zone,
+	 .set_enable = set_domain_enable,
+	 .get_enable = get_domain_enable,
+	 },
+	/* RAPL_DOMAIN_PP0 */
+	{
+	 .get_energy_uj = get_energy_counter,
+	 .get_max_energy_range_uj = get_max_energy_counter,
+	 .release = release_zone,
+	 .set_enable = set_domain_enable,
+	 .get_enable = get_domain_enable,
+	 },
+	/* RAPL_DOMAIN_PP1 */
+	{
+	 .get_energy_uj = get_energy_counter,
+	 .get_max_energy_range_uj = get_max_energy_counter,
+	 .release = release_zone,
+	 .set_enable = set_domain_enable,
+	 .get_enable = get_domain_enable,
+	 },
+	/* RAPL_DOMAIN_DRAM */
+	{
+	 .get_energy_uj = get_energy_counter,
+	 .get_max_energy_range_uj = get_max_energy_counter,
+	 .release = release_zone,
+	 .set_enable = set_domain_enable,
+	 .get_enable = get_domain_enable,
+	 },
+	/* RAPL_DOMAIN_PLATFORM */
+	{
+	 .get_energy_uj = get_energy_counter,
+	 .get_max_energy_range_uj = get_max_energy_counter,
+	 .release = release_zone,
+	 .set_enable = set_domain_enable,
+	 .get_enable = get_domain_enable,
+	 },
+};
+
+/*
+ * Constraint index used by powercap can be different than power limit (PL)
+ * index in that some  PLs maybe missing due to non-existent MSRs. So we
+ * need to convert here by finding the valid PLs only (name populated).
+ */
+static int contraint_to_pl(struct rapl_domain *rd, int cid)
+{
+	int i, j;
+
+	for (i = 0, j = 0; i < NR_POWER_LIMITS; i++) {
+		if ((rd->rpl[i].name) && j++ == cid) {
+			pr_debug("%s: index %d\n", __func__, i);
+			return i;
+		}
+	}
+	pr_err("Cannot find matching power limit for constraint %d\n", cid);
+
+	return -EINVAL;
+}
+
+static int set_power_limit(struct powercap_zone *power_zone, int cid,
+			   u64 power_limit)
+{
+	struct rapl_domain *rd;
+	struct rapl_package *rp;
+	int ret = 0;
+	int id;
+
+	cpus_read_lock();
+	rd = power_zone_to_rapl_domain(power_zone);
+	id = contraint_to_pl(rd, cid);
+	if (id < 0) {
+		ret = id;
+		goto set_exit;
+	}
+
+	rp = rd->rp;
+
+	if (rd->state & DOMAIN_STATE_BIOS_LOCKED) {
+		dev_warn(&power_zone->dev,
+			 "%s locked by BIOS, monitoring only\n", rd->name);
+		ret = -EACCES;
+		goto set_exit;
+	}
+
+	switch (rd->rpl[id].prim_id) {
+	case PL1_ENABLE:
+		rapl_write_data_raw(rd, POWER_LIMIT1, power_limit);
+		break;
+	case PL2_ENABLE:
+		rapl_write_data_raw(rd, POWER_LIMIT2, power_limit);
+		break;
+	case PL4_ENABLE:
+		rapl_write_data_raw(rd, POWER_LIMIT4, power_limit);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	if (!ret)
+		package_power_limit_irq_save(rp);
+set_exit:
+	cpus_read_unlock();
+	return ret;
+}
+
+static int get_current_power_limit(struct powercap_zone *power_zone, int cid,
+				   u64 *data)
+{
+	struct rapl_domain *rd;
+	u64 val;
+	int prim;
+	int ret = 0;
+	int id;
+
+	cpus_read_lock();
+	rd = power_zone_to_rapl_domain(power_zone);
+	id = contraint_to_pl(rd, cid);
+	if (id < 0) {
+		ret = id;
+		goto get_exit;
+	}
+
+	switch (rd->rpl[id].prim_id) {
+	case PL1_ENABLE:
+		prim = POWER_LIMIT1;
+		break;
+	case PL2_ENABLE:
+		prim = POWER_LIMIT2;
+		break;
+	case PL4_ENABLE:
+		prim = POWER_LIMIT4;
+		break;
+	default:
+		cpus_read_unlock();
+		return -EINVAL;
+	}
+	if (rapl_read_data_raw(rd, prim, true, &val))
+		ret = -EIO;
+	else
+		*data = val;
+
+get_exit:
+	cpus_read_unlock();
+
+	return ret;
+}
+
+static int set_time_window(struct powercap_zone *power_zone, int cid,
+			   u64 window)
+{
+	struct rapl_domain *rd;
+	int ret = 0;
+	int id;
+
+	cpus_read_lock();
+	rd = power_zone_to_rapl_domain(power_zone);
+	id = contraint_to_pl(rd, cid);
+	if (id < 0) {
+		ret = id;
+		goto set_time_exit;
+	}
+
+	switch (rd->rpl[id].prim_id) {
+	case PL1_ENABLE:
+		rapl_write_data_raw(rd, TIME_WINDOW1, window);
+		break;
+	case PL2_ENABLE:
+		rapl_write_data_raw(rd, TIME_WINDOW2, window);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+set_time_exit:
+	cpus_read_unlock();
+	return ret;
+}
+
+static int get_time_window(struct powercap_zone *power_zone, int cid,
+			   u64 *data)
+{
+	struct rapl_domain *rd;
+	u64 val;
+	int ret = 0;
+	int id;
+
+	cpus_read_lock();
+	rd = power_zone_to_rapl_domain(power_zone);
+	id = contraint_to_pl(rd, cid);
+	if (id < 0) {
+		ret = id;
+		goto get_time_exit;
+	}
+
+	switch (rd->rpl[id].prim_id) {
+	case PL1_ENABLE:
+		ret = rapl_read_data_raw(rd, TIME_WINDOW1, true, &val);
+		break;
+	case PL2_ENABLE:
+		ret = rapl_read_data_raw(rd, TIME_WINDOW2, true, &val);
+		break;
+	case PL4_ENABLE:
+		/*
+		 * Time window parameter is not applicable for PL4 entry
+		 * so assigining '0' as default value.
+		 */
+		val = 0;
+		break;
+	default:
+		cpus_read_unlock();
+		return -EINVAL;
+	}
+	if (!ret)
+		*data = val;
+
+get_time_exit:
+	cpus_read_unlock();
+
+	return ret;
+}
+
+static const char *get_constraint_name(struct powercap_zone *power_zone,
+				       int cid)
+{
+	struct rapl_domain *rd;
+	int id;
+
+	rd = power_zone_to_rapl_domain(power_zone);
+	id = contraint_to_pl(rd, cid);
+	if (id >= 0)
+		return rd->rpl[id].name;
+
+	return NULL;
+}
+
+static int get_max_power(struct powercap_zone *power_zone, int id, u64 *data)
+{
+	struct rapl_domain *rd;
+	u64 val;
+	int prim;
+	int ret = 0;
+
+	cpus_read_lock();
+	rd = power_zone_to_rapl_domain(power_zone);
+	switch (rd->rpl[id].prim_id) {
+	case PL1_ENABLE:
+		prim = THERMAL_SPEC_POWER;
+		break;
+	case PL2_ENABLE:
+		prim = MAX_POWER;
+		break;
+	case PL4_ENABLE:
+		prim = MAX_POWER;
+		break;
+	default:
+		cpus_read_unlock();
+		return -EINVAL;
+	}
+	if (rapl_read_data_raw(rd, prim, true, &val))
+		ret = -EIO;
+	else
+		*data = val;
+
+	/* As a generalization rule, PL4 would be around two times PL2. */
+	if (rd->rpl[id].prim_id == PL4_ENABLE)
+		*data = *data * 2;
+
+	cpus_read_unlock();
+
+	return ret;
+}
+
+static const struct powercap_zone_constraint_ops constraint_ops = {
+	.set_power_limit_uw = set_power_limit,
+	.get_power_limit_uw = get_current_power_limit,
+	.set_time_window_us = set_time_window,
+	.get_time_window_us = get_time_window,
+	.get_max_power_uw = get_max_power,
+	.get_name = get_constraint_name,
+};
+
+/* called after domain detection and package level data are set */
+static void rapl_init_domains(struct rapl_package *rp)
+{
+	enum rapl_domain_type i;
+	enum rapl_domain_reg_id j;
+	struct rapl_domain *rd = rp->domains;
+
+	for (i = 0; i < RAPL_DOMAIN_MAX; i++) {
+		unsigned int mask = rp->domain_map & (1 << i);
+
+		if (!mask)
+			continue;
+
+		rd->rp = rp;
+
+		if (i == RAPL_DOMAIN_PLATFORM && rp->id > 0) {
+			snprintf(rd->name, RAPL_DOMAIN_NAME_LENGTH, "psys-%d",
+				topology_physical_package_id(rp->lead_cpu));
+		} else
+			snprintf(rd->name, RAPL_DOMAIN_NAME_LENGTH, "%s",
+				rapl_domain_names[i]);
+
+		rd->id = i;
+		rd->rpl[0].prim_id = PL1_ENABLE;
+		rd->rpl[0].name = pl1_name;
+
+		/*
+		 * The PL2 power domain is applicable for limits two
+		 * and limits three
+		 */
+		if (rp->priv->limits[i] >= 2) {
+			rd->rpl[1].prim_id = PL2_ENABLE;
+			rd->rpl[1].name = pl2_name;
+		}
+
+		/* Enable PL4 domain if the total power limits are three */
+		if (rp->priv->limits[i] == 3) {
+			rd->rpl[2].prim_id = PL4_ENABLE;
+			rd->rpl[2].name = pl4_name;
+		}
+
+		for (j = 0; j < RAPL_DOMAIN_REG_MAX; j++)
+			rd->regs[j] = rp->priv->regs[i][j];
+
+		switch (i) {
+		case RAPL_DOMAIN_DRAM:
+			rd->domain_energy_unit =
+			    rapl_defaults->dram_domain_energy_unit;
+			if (rd->domain_energy_unit)
+				pr_info("DRAM domain energy unit %dpj\n",
+					rd->domain_energy_unit);
+			break;
+		case RAPL_DOMAIN_PLATFORM:
+			rd->domain_energy_unit =
+			    rapl_defaults->psys_domain_energy_unit;
+			if (rd->domain_energy_unit)
+				pr_info("Platform domain energy unit %dpj\n",
+					rd->domain_energy_unit);
+			break;
+		default:
+			break;
+		}
+		rd++;
+	}
+}
+
+static u64 rapl_unit_xlate(struct rapl_domain *rd, enum unit_type type,
+			   u64 value, int to_raw)
+{
+	u64 units = 1;
+	struct rapl_package *rp = rd->rp;
+	u64 scale = 1;
+
+	switch (type) {
+	case POWER_UNIT:
+		units = rp->power_unit;
+		break;
+	case ENERGY_UNIT:
+		scale = ENERGY_UNIT_SCALE;
+		/* per domain unit takes precedence */
+		if (rd->domain_energy_unit)
+			units = rd->domain_energy_unit;
+		else
+			units = rp->energy_unit;
+		break;
+	case TIME_UNIT:
+		return rapl_defaults->compute_time_window(rp, value, to_raw);
+	case ARBITRARY_UNIT:
+	default:
+		return value;
+	}
+
+	if (to_raw)
+		return div64_u64(value, units) * scale;
+
+	value *= units;
+
+	return div64_u64(value, scale);
+}
+
+/* in the order of enum rapl_primitives */
+static struct rapl_primitive_info rpi[] = {
+	/* name, mask, shift, msr index, unit divisor */
+	PRIMITIVE_INFO_INIT(ENERGY_COUNTER, ENERGY_STATUS_MASK, 0,
+			    RAPL_DOMAIN_REG_STATUS, ENERGY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(POWER_LIMIT1, POWER_LIMIT1_MASK, 0,
+			    RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(POWER_LIMIT2, POWER_LIMIT2_MASK, 32,
+			    RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(POWER_LIMIT4, POWER_LIMIT4_MASK, 0,
+				RAPL_DOMAIN_REG_PL4, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(FW_LOCK, POWER_LOW_LOCK, 31,
+			    RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15,
+			    RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PL1_CLAMP, POWER_LIMIT1_CLAMP, 16,
+			    RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PL2_ENABLE, POWER_LIMIT2_ENABLE, 47,
+			    RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PL2_CLAMP, POWER_LIMIT2_CLAMP, 48,
+			    RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PL4_ENABLE, POWER_LIMIT4_MASK, 0,
+				RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(TIME_WINDOW1, TIME_WINDOW1_MASK, 17,
+			    RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0),
+	PRIMITIVE_INFO_INIT(TIME_WINDOW2, TIME_WINDOW2_MASK, 49,
+			    RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0),
+	PRIMITIVE_INFO_INIT(THERMAL_SPEC_POWER, POWER_INFO_THERMAL_SPEC_MASK,
+			    0, RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(MAX_POWER, POWER_INFO_MAX_MASK, 32,
+			    RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(MIN_POWER, POWER_INFO_MIN_MASK, 16,
+			    RAPL_DOMAIN_REG_INFO, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(MAX_TIME_WINDOW, POWER_INFO_MAX_TIME_WIN_MASK, 48,
+			    RAPL_DOMAIN_REG_INFO, TIME_UNIT, 0),
+	PRIMITIVE_INFO_INIT(THROTTLED_TIME, PERF_STATUS_THROTTLE_TIME_MASK, 0,
+			    RAPL_DOMAIN_REG_PERF, TIME_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PRIORITY_LEVEL, PP_POLICY_MASK, 0,
+			    RAPL_DOMAIN_REG_POLICY, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_POWER_LIMIT1, PSYS_POWER_LIMIT1_MASK, 0,
+			    RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_POWER_LIMIT2, PSYS_POWER_LIMIT2_MASK, 32,
+			    RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_PL1_ENABLE, PSYS_POWER_LIMIT1_ENABLE, 17,
+			    RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_PL2_ENABLE, PSYS_POWER_LIMIT2_ENABLE, 49,
+			    RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_TIME_WINDOW1, PSYS_TIME_WINDOW1_MASK, 19,
+			    RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0),
+	PRIMITIVE_INFO_INIT(PSYS_TIME_WINDOW2, PSYS_TIME_WINDOW2_MASK, 51,
+			    RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0),
+	/* non-hardware */
+	PRIMITIVE_INFO_INIT(AVERAGE_POWER, 0, 0, 0, POWER_UNIT,
+			    RAPL_PRIMITIVE_DERIVED),
+	{NULL, 0, 0, 0},
+};
+
+static enum rapl_primitives
+prim_fixups(struct rapl_domain *rd, enum rapl_primitives prim)
+{
+	if (!rapl_defaults->spr_psys_bits)
+		return prim;
+
+	if (rd->id != RAPL_DOMAIN_PLATFORM)
+		return prim;
+
+	switch (prim) {
+	case POWER_LIMIT1:
+		return PSYS_POWER_LIMIT1;
+	case POWER_LIMIT2:
+		return PSYS_POWER_LIMIT2;
+	case PL1_ENABLE:
+		return PSYS_PL1_ENABLE;
+	case PL2_ENABLE:
+		return PSYS_PL2_ENABLE;
+	case TIME_WINDOW1:
+		return PSYS_TIME_WINDOW1;
+	case TIME_WINDOW2:
+		return PSYS_TIME_WINDOW2;
+	default:
+		return prim;
+	}
+}
+
+/* Read primitive data based on its related struct rapl_primitive_info.
+ * if xlate flag is set, return translated data based on data units, i.e.
+ * time, energy, and power.
+ * RAPL MSRs are non-architectual and are laid out not consistently across
+ * domains. Here we use primitive info to allow writing consolidated access
+ * functions.
+ * For a given primitive, it is processed by MSR mask and shift. Unit conversion
+ * is pre-assigned based on RAPL unit MSRs read at init time.
+ * 63-------------------------- 31--------------------------- 0
+ * |                           xxxxx (mask)                   |
+ * |                                |<- shift ----------------|
+ * 63-------------------------- 31--------------------------- 0
+ */
+static int rapl_read_data_raw(struct rapl_domain *rd,
+			      enum rapl_primitives prim, bool xlate, u64 *data)
+{
+	u64 value;
+	enum rapl_primitives prim_fixed = prim_fixups(rd, prim);
+	struct rapl_primitive_info *rp = &rpi[prim_fixed];
+	struct reg_action ra;
+	int cpu;
+
+	if (!rp->name || rp->flag & RAPL_PRIMITIVE_DUMMY)
+		return -EINVAL;
+
+	ra.reg = rd->regs[rp->id];
+	if (!ra.reg)
+		return -EINVAL;
+
+	cpu = rd->rp->lead_cpu;
+
+	/* domain with 2 limits has different bit */
+	if (prim == FW_LOCK && rd->rp->priv->limits[rd->id] == 2) {
+		rp->mask = POWER_HIGH_LOCK;
+		rp->shift = 63;
+	}
+	/* non-hardware data are collected by the polling thread */
+	if (rp->flag & RAPL_PRIMITIVE_DERIVED) {
+		*data = rd->rdd.primitives[prim];
+		return 0;
+	}
+
+	ra.mask = rp->mask;
+
+	if (rd->rp->priv->read_raw(cpu, &ra)) {
+		pr_debug("failed to read reg 0x%llx on cpu %d\n", ra.reg, cpu);
+		return -EIO;
+	}
+
+	value = ra.value >> rp->shift;
+
+	if (xlate)
+		*data = rapl_unit_xlate(rd, rp->unit, value, 0);
+	else
+		*data = value;
+
+	return 0;
+}
+
+/* Similar use of primitive info in the read counterpart */
+static int rapl_write_data_raw(struct rapl_domain *rd,
+			       enum rapl_primitives prim,
+			       unsigned long long value)
+{
+	enum rapl_primitives prim_fixed = prim_fixups(rd, prim);
+	struct rapl_primitive_info *rp = &rpi[prim_fixed];
+	int cpu;
+	u64 bits;
+	struct reg_action ra;
+	int ret;
+
+	cpu = rd->rp->lead_cpu;
+	bits = rapl_unit_xlate(rd, rp->unit, value, 1);
+	bits <<= rp->shift;
+	bits &= rp->mask;
+
+	memset(&ra, 0, sizeof(ra));
+
+	ra.reg = rd->regs[rp->id];
+	ra.mask = rp->mask;
+	ra.value = bits;
+
+	ret = rd->rp->priv->write_raw(cpu, &ra);
+
+	return ret;
+}
+
+/*
+ * Raw RAPL data stored in MSRs are in certain scales. We need to
+ * convert them into standard units based on the units reported in
+ * the RAPL unit MSRs. This is specific to CPUs as the method to
+ * calculate units differ on different CPUs.
+ * We convert the units to below format based on CPUs.
+ * i.e.
+ * energy unit: picoJoules  : Represented in picoJoules by default
+ * power unit : microWatts  : Represented in milliWatts by default
+ * time unit  : microseconds: Represented in seconds by default
+ */
+static int rapl_check_unit_core(struct rapl_package *rp, int cpu)
+{
+	struct reg_action ra;
+	u32 value;
+
+	ra.reg = rp->priv->reg_unit;
+	ra.mask = ~0;
+	if (rp->priv->read_raw(cpu, &ra)) {
+		pr_err("Failed to read power unit REG 0x%llx on CPU %d, exit.\n",
+		       rp->priv->reg_unit, cpu);
+		return -ENODEV;
+	}
+
+	value = (ra.value & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
+	rp->energy_unit = ENERGY_UNIT_SCALE * 1000000 / (1 << value);
+
+	value = (ra.value & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
+	rp->power_unit = 1000000 / (1 << value);
+
+	value = (ra.value & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
+	rp->time_unit = 1000000 / (1 << value);
+
+	pr_debug("Core CPU %s energy=%dpJ, time=%dus, power=%duW\n",
+		 rp->name, rp->energy_unit, rp->time_unit, rp->power_unit);
+
+	return 0;
+}
+
+static int rapl_check_unit_atom(struct rapl_package *rp, int cpu)
+{
+	struct reg_action ra;
+	u32 value;
+
+	ra.reg = rp->priv->reg_unit;
+	ra.mask = ~0;
+	if (rp->priv->read_raw(cpu, &ra)) {
+		pr_err("Failed to read power unit REG 0x%llx on CPU %d, exit.\n",
+		       rp->priv->reg_unit, cpu);
+		return -ENODEV;
+	}
+
+	value = (ra.value & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
+	rp->energy_unit = ENERGY_UNIT_SCALE * 1 << value;
+
+	value = (ra.value & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
+	rp->power_unit = (1 << value) * 1000;
+
+	value = (ra.value & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
+	rp->time_unit = 1000000 / (1 << value);
+
+	pr_debug("Atom %s energy=%dpJ, time=%dus, power=%duW\n",
+		 rp->name, rp->energy_unit, rp->time_unit, rp->power_unit);
+
+	return 0;
+}
+
+static void power_limit_irq_save_cpu(void *info)
+{
+	u32 l, h = 0;
+	struct rapl_package *rp = (struct rapl_package *)info;
+
+	/* save the state of PLN irq mask bit before disabling it */
+	rdmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, &l, &h);
+	if (!(rp->power_limit_irq & PACKAGE_PLN_INT_SAVED)) {
+		rp->power_limit_irq = l & PACKAGE_THERM_INT_PLN_ENABLE;
+		rp->power_limit_irq |= PACKAGE_PLN_INT_SAVED;
+	}
+	l &= ~PACKAGE_THERM_INT_PLN_ENABLE;
+	wrmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+}
+
+/* REVISIT:
+ * When package power limit is set artificially low by RAPL, LVT
+ * thermal interrupt for package power limit should be ignored
+ * since we are not really exceeding the real limit. The intention
+ * is to avoid excessive interrupts while we are trying to save power.
+ * A useful feature might be routing the package_power_limit interrupt
+ * to userspace via eventfd. once we have a usecase, this is simple
+ * to do by adding an atomic notifier.
+ */
+
+static void package_power_limit_irq_save(struct rapl_package *rp)
+{
+	if (!boot_cpu_has(X86_FEATURE_PTS) || !boot_cpu_has(X86_FEATURE_PLN))
+		return;
+
+	smp_call_function_single(rp->lead_cpu, power_limit_irq_save_cpu, rp, 1);
+}
+
+/*
+ * Restore per package power limit interrupt enable state. Called from cpu
+ * hotplug code on package removal.
+ */
+static void package_power_limit_irq_restore(struct rapl_package *rp)
+{
+	u32 l, h;
+
+	if (!boot_cpu_has(X86_FEATURE_PTS) || !boot_cpu_has(X86_FEATURE_PLN))
+		return;
+
+	/* irq enable state not saved, nothing to restore */
+	if (!(rp->power_limit_irq & PACKAGE_PLN_INT_SAVED))
+		return;
+
+	rdmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, &l, &h);
+
+	if (rp->power_limit_irq & PACKAGE_THERM_INT_PLN_ENABLE)
+		l |= PACKAGE_THERM_INT_PLN_ENABLE;
+	else
+		l &= ~PACKAGE_THERM_INT_PLN_ENABLE;
+
+	wrmsr_safe(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
+}
+
+static void set_floor_freq_default(struct rapl_domain *rd, bool mode)
+{
+	int nr_powerlimit = find_nr_power_limit(rd);
+
+	/* always enable clamp such that p-state can go below OS requested
+	 * range. power capping priority over guranteed frequency.
+	 */
+	rapl_write_data_raw(rd, PL1_CLAMP, mode);
+
+	/* some domains have pl2 */
+	if (nr_powerlimit > 1) {
+		rapl_write_data_raw(rd, PL2_ENABLE, mode);
+		rapl_write_data_raw(rd, PL2_CLAMP, mode);
+	}
+}
+
+static void set_floor_freq_atom(struct rapl_domain *rd, bool enable)
+{
+	static u32 power_ctrl_orig_val;
+	u32 mdata;
+
+	if (!rapl_defaults->floor_freq_reg_addr) {
+		pr_err("Invalid floor frequency config register\n");
+		return;
+	}
+
+	if (!power_ctrl_orig_val)
+		iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_CR_READ,
+			      rapl_defaults->floor_freq_reg_addr,
+			      &power_ctrl_orig_val);
+	mdata = power_ctrl_orig_val;
+	if (enable) {
+		mdata &= ~(0x7f << 8);
+		mdata |= 1 << 8;
+	}
+	iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_CR_WRITE,
+		       rapl_defaults->floor_freq_reg_addr, mdata);
+}
+
+static u64 rapl_compute_time_window_core(struct rapl_package *rp, u64 value,
+					 bool to_raw)
+{
+	u64 f, y;		/* fraction and exp. used for time unit */
+
+	/*
+	 * Special processing based on 2^Y*(1+F/4), refer
+	 * to Intel Software Developer's manual Vol.3B: CH 14.9.3.
+	 */
+	if (!to_raw) {
+		f = (value & 0x60) >> 5;
+		y = value & 0x1f;
+		value = (1 << y) * (4 + f) * rp->time_unit / 4;
+	} else {
+		if (value < rp->time_unit)
+			return 0;
+
+		do_div(value, rp->time_unit);
+		y = ilog2(value);
+		f = div64_u64(4 * (value - (1 << y)), 1 << y);
+		value = (y & 0x1f) | ((f & 0x3) << 5);
+	}
+	return value;
+}
+
+static u64 rapl_compute_time_window_atom(struct rapl_package *rp, u64 value,
+					 bool to_raw)
+{
+	/*
+	 * Atom time unit encoding is straight forward val * time_unit,
+	 * where time_unit is default to 1 sec. Never 0.
+	 */
+	if (!to_raw)
+		return (value) ? value * rp->time_unit : rp->time_unit;
+
+	value = div64_u64(value, rp->time_unit);
+
+	return value;
+}
+
+static const struct rapl_defaults rapl_defaults_core = {
+	.floor_freq_reg_addr = 0,
+	.check_unit = rapl_check_unit_core,
+	.set_floor_freq = set_floor_freq_default,
+	.compute_time_window = rapl_compute_time_window_core,
+};
+
+static const struct rapl_defaults rapl_defaults_hsw_server = {
+	.check_unit = rapl_check_unit_core,
+	.set_floor_freq = set_floor_freq_default,
+	.compute_time_window = rapl_compute_time_window_core,
+	.dram_domain_energy_unit = 15300,
+};
+
+static const struct rapl_defaults rapl_defaults_spr_server = {
+	.check_unit = rapl_check_unit_core,
+	.set_floor_freq = set_floor_freq_default,
+	.compute_time_window = rapl_compute_time_window_core,
+	.psys_domain_energy_unit = 1000000000,
+	.spr_psys_bits = true,
+};
+
+static const struct rapl_defaults rapl_defaults_byt = {
+	.floor_freq_reg_addr = IOSF_CPU_POWER_BUDGET_CTL_BYT,
+	.check_unit = rapl_check_unit_atom,
+	.set_floor_freq = set_floor_freq_atom,
+	.compute_time_window = rapl_compute_time_window_atom,
+};
+
+static const struct rapl_defaults rapl_defaults_tng = {
+	.floor_freq_reg_addr = IOSF_CPU_POWER_BUDGET_CTL_TNG,
+	.check_unit = rapl_check_unit_atom,
+	.set_floor_freq = set_floor_freq_atom,
+	.compute_time_window = rapl_compute_time_window_atom,
+};
+
+static const struct rapl_defaults rapl_defaults_ann = {
+	.floor_freq_reg_addr = 0,
+	.check_unit = rapl_check_unit_atom,
+	.set_floor_freq = NULL,
+	.compute_time_window = rapl_compute_time_window_atom,
+};
+
+static const struct rapl_defaults rapl_defaults_cht = {
+	.floor_freq_reg_addr = 0,
+	.check_unit = rapl_check_unit_atom,
+	.set_floor_freq = NULL,
+	.compute_time_window = rapl_compute_time_window_atom,
+};
+
+static const struct rapl_defaults rapl_defaults_amd = {
+	.check_unit = rapl_check_unit_core,
+};
+
+static const struct x86_cpu_id rapl_ids[] __initconst = {
+	X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE_X,	&rapl_defaults_core),
+
+	X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE_X,		&rapl_defaults_core),
+
+	X86_MATCH_INTEL_FAM6_MODEL(HASWELL,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(HASWELL_L,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(HASWELL_G,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X,		&rapl_defaults_hsw_server),
+
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_G,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_D,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X,		&rapl_defaults_hsw_server),
+
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,		&rapl_defaults_hsw_server),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(CANNONLAKE_L,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_NNPI,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		&rapl_defaults_hsw_server),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,		&rapl_defaults_hsw_server),
+	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE_L,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ROCKETLAKE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_N,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE,		&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_P,        &rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(RAPTORLAKE_S,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X,	&rapl_defaults_spr_server),
+	X86_MATCH_INTEL_FAM6_MODEL(LAKEFIELD,		&rapl_defaults_core),
+
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT,	&rapl_defaults_byt),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT,	&rapl_defaults_cht),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID,	&rapl_defaults_tng),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT_MID,	&rapl_defaults_ann),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&rapl_defaults_core),
+
+	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL,	&rapl_defaults_hsw_server),
+	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM,	&rapl_defaults_hsw_server),
+
+	X86_MATCH_VENDOR_FAM(AMD, 0x17, &rapl_defaults_amd),
+	X86_MATCH_VENDOR_FAM(AMD, 0x19, &rapl_defaults_amd),
+	X86_MATCH_VENDOR_FAM(HYGON, 0x18, &rapl_defaults_amd),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, rapl_ids);
+
+/* Read once for all raw primitive data for domains */
+static void rapl_update_domain_data(struct rapl_package *rp)
+{
+	int dmn, prim;
+	u64 val;
+
+	for (dmn = 0; dmn < rp->nr_domains; dmn++) {
+		pr_debug("update %s domain %s data\n", rp->name,
+			 rp->domains[dmn].name);
+		/* exclude non-raw primitives */
+		for (prim = 0; prim < NR_RAW_PRIMITIVES; prim++) {
+			if (!rapl_read_data_raw(&rp->domains[dmn], prim,
+						rpi[prim].unit, &val))
+				rp->domains[dmn].rdd.primitives[prim] = val;
+		}
+	}
+
+}
+
+static int rapl_package_register_powercap(struct rapl_package *rp)
+{
+	struct rapl_domain *rd;
+	struct powercap_zone *power_zone = NULL;
+	int nr_pl, ret;
+
+	/* Update the domain data of the new package */
+	rapl_update_domain_data(rp);
+
+	/* first we register package domain as the parent zone */
+	for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) {
+		if (rd->id == RAPL_DOMAIN_PACKAGE) {
+			nr_pl = find_nr_power_limit(rd);
+			pr_debug("register package domain %s\n", rp->name);
+			power_zone = powercap_register_zone(&rd->power_zone,
+					    rp->priv->control_type, rp->name,
+					    NULL, &zone_ops[rd->id], nr_pl,
+					    &constraint_ops);
+			if (IS_ERR(power_zone)) {
+				pr_debug("failed to register power zone %s\n",
+					 rp->name);
+				return PTR_ERR(power_zone);
+			}
+			/* track parent zone in per package/socket data */
+			rp->power_zone = power_zone;
+			/* done, only one package domain per socket */
+			break;
+		}
+	}
+	if (!power_zone) {
+		pr_err("no package domain found, unknown topology!\n");
+		return -ENODEV;
+	}
+	/* now register domains as children of the socket/package */
+	for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) {
+		struct powercap_zone *parent = rp->power_zone;
+
+		if (rd->id == RAPL_DOMAIN_PACKAGE)
+			continue;
+		if (rd->id == RAPL_DOMAIN_PLATFORM)
+			parent = NULL;
+		/* number of power limits per domain varies */
+		nr_pl = find_nr_power_limit(rd);
+		power_zone = powercap_register_zone(&rd->power_zone,
+						    rp->priv->control_type,
+						    rd->name, parent,
+						    &zone_ops[rd->id], nr_pl,
+						    &constraint_ops);
+
+		if (IS_ERR(power_zone)) {
+			pr_debug("failed to register power_zone, %s:%s\n",
+				 rp->name, rd->name);
+			ret = PTR_ERR(power_zone);
+			goto err_cleanup;
+		}
+	}
+	return 0;
+
+err_cleanup:
+	/*
+	 * Clean up previously initialized domains within the package if we
+	 * failed after the first domain setup.
+	 */
+	while (--rd >= rp->domains) {
+		pr_debug("unregister %s domain %s\n", rp->name, rd->name);
+		powercap_unregister_zone(rp->priv->control_type,
+					 &rd->power_zone);
+	}
+
+	return ret;
+}
+
+static int rapl_check_domain(int cpu, int domain, struct rapl_package *rp)
+{
+	struct reg_action ra;
+
+	switch (domain) {
+	case RAPL_DOMAIN_PACKAGE:
+	case RAPL_DOMAIN_PP0:
+	case RAPL_DOMAIN_PP1:
+	case RAPL_DOMAIN_DRAM:
+	case RAPL_DOMAIN_PLATFORM:
+		ra.reg = rp->priv->regs[domain][RAPL_DOMAIN_REG_STATUS];
+		break;
+	default:
+		pr_err("invalid domain id %d\n", domain);
+		return -EINVAL;
+	}
+	/* make sure domain counters are available and contains non-zero
+	 * values, otherwise skip it.
+	 */
+
+	ra.mask = ENERGY_STATUS_MASK;
+	if (rp->priv->read_raw(cpu, &ra) || !ra.value)
+		return -ENODEV;
+
+	return 0;
+}
+
+/*
+ * Check if power limits are available. Two cases when they are not available:
+ * 1. Locked by BIOS, in this case we still provide read-only access so that
+ *    users can see what limit is set by the BIOS.
+ * 2. Some CPUs make some domains monitoring only which means PLx MSRs may not
+ *    exist at all. In this case, we do not show the constraints in powercap.
+ *
+ * Called after domains are detected and initialized.
+ */
+static void rapl_detect_powerlimit(struct rapl_domain *rd)
+{
+	u64 val64;
+	int i;
+
+	/* check if the domain is locked by BIOS, ignore if MSR doesn't exist */
+	if (!rapl_read_data_raw(rd, FW_LOCK, false, &val64)) {
+		if (val64) {
+			pr_info("RAPL %s domain %s locked by BIOS\n",
+				rd->rp->name, rd->name);
+			rd->state |= DOMAIN_STATE_BIOS_LOCKED;
+		}
+	}
+	/* check if power limit MSR exists, otherwise domain is monitoring only */
+	for (i = 0; i < NR_POWER_LIMITS; i++) {
+		int prim = rd->rpl[i].prim_id;
+
+		if (rapl_read_data_raw(rd, prim, false, &val64))
+			rd->rpl[i].name = NULL;
+	}
+}
+
+/* Detect active and valid domains for the given CPU, caller must
+ * ensure the CPU belongs to the targeted package and CPU hotlug is disabled.
+ */
+static int rapl_detect_domains(struct rapl_package *rp, int cpu)
+{
+	struct rapl_domain *rd;
+	int i;
+
+	for (i = 0; i < RAPL_DOMAIN_MAX; i++) {
+		/* use physical package id to read counters */
+		if (!rapl_check_domain(cpu, i, rp)) {
+			rp->domain_map |= 1 << i;
+			pr_info("Found RAPL domain %s\n", rapl_domain_names[i]);
+		}
+	}
+	rp->nr_domains = bitmap_weight(&rp->domain_map, RAPL_DOMAIN_MAX);
+	if (!rp->nr_domains) {
+		pr_debug("no valid rapl domains found in %s\n", rp->name);
+		return -ENODEV;
+	}
+	pr_debug("found %d domains on %s\n", rp->nr_domains, rp->name);
+
+	rp->domains = kcalloc(rp->nr_domains + 1, sizeof(struct rapl_domain),
+			      GFP_KERNEL);
+	if (!rp->domains)
+		return -ENOMEM;
+
+	rapl_init_domains(rp);
+
+	for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++)
+		rapl_detect_powerlimit(rd);
+
+	return 0;
+}
+
+/* called from CPU hotplug notifier, hotplug lock held */
+void rapl_remove_package(struct rapl_package *rp)
+{
+	struct rapl_domain *rd, *rd_package = NULL;
+
+	package_power_limit_irq_restore(rp);
+
+	for (rd = rp->domains; rd < rp->domains + rp->nr_domains; rd++) {
+		rapl_write_data_raw(rd, PL1_ENABLE, 0);
+		rapl_write_data_raw(rd, PL1_CLAMP, 0);
+		if (find_nr_power_limit(rd) > 1) {
+			rapl_write_data_raw(rd, PL2_ENABLE, 0);
+			rapl_write_data_raw(rd, PL2_CLAMP, 0);
+			rapl_write_data_raw(rd, PL4_ENABLE, 0);
+		}
+		if (rd->id == RAPL_DOMAIN_PACKAGE) {
+			rd_package = rd;
+			continue;
+		}
+		pr_debug("remove package, undo power limit on %s: %s\n",
+			 rp->name, rd->name);
+		powercap_unregister_zone(rp->priv->control_type,
+					 &rd->power_zone);
+	}
+	/* do parent zone last */
+	powercap_unregister_zone(rp->priv->control_type,
+				 &rd_package->power_zone);
+	list_del(&rp->plist);
+	kfree(rp);
+}
+EXPORT_SYMBOL_GPL(rapl_remove_package);
+
+/* caller to ensure CPU hotplug lock is held */
+struct rapl_package *rapl_find_package_domain(int cpu, struct rapl_if_priv *priv)
+{
+	int id = topology_logical_die_id(cpu);
+	struct rapl_package *rp;
+
+	list_for_each_entry(rp, &rapl_packages, plist) {
+		if (rp->id == id
+		    && rp->priv->control_type == priv->control_type)
+			return rp;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(rapl_find_package_domain);
+
+/* called from CPU hotplug notifier, hotplug lock held */
+struct rapl_package *rapl_add_package(int cpu, struct rapl_if_priv *priv)
+{
+	int id = topology_logical_die_id(cpu);
+	struct rapl_package *rp;
+	int ret;
+
+	if (!rapl_defaults)
+		return ERR_PTR(-ENODEV);
+
+	rp = kzalloc(sizeof(struct rapl_package), GFP_KERNEL);
+	if (!rp)
+		return ERR_PTR(-ENOMEM);
+
+	/* add the new package to the list */
+	rp->id = id;
+	rp->lead_cpu = cpu;
+	rp->priv = priv;
+
+	if (topology_max_die_per_package() > 1)
+		snprintf(rp->name, PACKAGE_DOMAIN_NAME_LENGTH,
+			 "package-%d-die-%d",
+			 topology_physical_package_id(cpu), topology_die_id(cpu));
+	else
+		snprintf(rp->name, PACKAGE_DOMAIN_NAME_LENGTH, "package-%d",
+			 topology_physical_package_id(cpu));
+
+	/* check if the package contains valid domains */
+	if (rapl_detect_domains(rp, cpu) || rapl_defaults->check_unit(rp, cpu)) {
+		ret = -ENODEV;
+		goto err_free_package;
+	}
+	ret = rapl_package_register_powercap(rp);
+	if (!ret) {
+		INIT_LIST_HEAD(&rp->plist);
+		list_add(&rp->plist, &rapl_packages);
+		return rp;
+	}
+
+err_free_package:
+	kfree(rp->domains);
+	kfree(rp);
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(rapl_add_package);
+
+static void power_limit_state_save(void)
+{
+	struct rapl_package *rp;
+	struct rapl_domain *rd;
+	int nr_pl, ret, i;
+
+	cpus_read_lock();
+	list_for_each_entry(rp, &rapl_packages, plist) {
+		if (!rp->power_zone)
+			continue;
+		rd = power_zone_to_rapl_domain(rp->power_zone);
+		nr_pl = find_nr_power_limit(rd);
+		for (i = 0; i < nr_pl; i++) {
+			switch (rd->rpl[i].prim_id) {
+			case PL1_ENABLE:
+				ret = rapl_read_data_raw(rd,
+						 POWER_LIMIT1, true,
+						 &rd->rpl[i].last_power_limit);
+				if (ret)
+					rd->rpl[i].last_power_limit = 0;
+				break;
+			case PL2_ENABLE:
+				ret = rapl_read_data_raw(rd,
+						 POWER_LIMIT2, true,
+						 &rd->rpl[i].last_power_limit);
+				if (ret)
+					rd->rpl[i].last_power_limit = 0;
+				break;
+			case PL4_ENABLE:
+				ret = rapl_read_data_raw(rd,
+						 POWER_LIMIT4, true,
+						 &rd->rpl[i].last_power_limit);
+				if (ret)
+					rd->rpl[i].last_power_limit = 0;
+				break;
+			}
+		}
+	}
+	cpus_read_unlock();
+}
+
+static void power_limit_state_restore(void)
+{
+	struct rapl_package *rp;
+	struct rapl_domain *rd;
+	int nr_pl, i;
+
+	cpus_read_lock();
+	list_for_each_entry(rp, &rapl_packages, plist) {
+		if (!rp->power_zone)
+			continue;
+		rd = power_zone_to_rapl_domain(rp->power_zone);
+		nr_pl = find_nr_power_limit(rd);
+		for (i = 0; i < nr_pl; i++) {
+			switch (rd->rpl[i].prim_id) {
+			case PL1_ENABLE:
+				if (rd->rpl[i].last_power_limit)
+					rapl_write_data_raw(rd, POWER_LIMIT1,
+					    rd->rpl[i].last_power_limit);
+				break;
+			case PL2_ENABLE:
+				if (rd->rpl[i].last_power_limit)
+					rapl_write_data_raw(rd, POWER_LIMIT2,
+					    rd->rpl[i].last_power_limit);
+				break;
+			case PL4_ENABLE:
+				if (rd->rpl[i].last_power_limit)
+					rapl_write_data_raw(rd, POWER_LIMIT4,
+					    rd->rpl[i].last_power_limit);
+				break;
+			}
+		}
+	}
+	cpus_read_unlock();
+}
+
+static int rapl_pm_callback(struct notifier_block *nb,
+			    unsigned long mode, void *_unused)
+{
+	switch (mode) {
+	case PM_SUSPEND_PREPARE:
+		power_limit_state_save();
+		break;
+	case PM_POST_SUSPEND:
+		power_limit_state_restore();
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block rapl_pm_notifier = {
+	.notifier_call = rapl_pm_callback,
+};
+
+static struct platform_device *rapl_msr_platdev;
+
+static int __init rapl_init(void)
+{
+	const struct x86_cpu_id *id;
+	int ret;
+
+	id = x86_match_cpu(rapl_ids);
+	if (!id) {
+		pr_err("driver does not support CPU family %d model %d\n",
+		       boot_cpu_data.x86, boot_cpu_data.x86_model);
+
+		return -ENODEV;
+	}
+
+	rapl_defaults = (struct rapl_defaults *)id->driver_data;
+
+	ret = register_pm_notifier(&rapl_pm_notifier);
+	if (ret)
+		return ret;
+
+	rapl_msr_platdev = platform_device_alloc("intel_rapl_msr", 0);
+	if (!rapl_msr_platdev) {
+		ret = -ENOMEM;
+		goto end;
+	}
+
+	ret = platform_device_add(rapl_msr_platdev);
+	if (ret)
+		platform_device_put(rapl_msr_platdev);
+
+end:
+	if (ret)
+		unregister_pm_notifier(&rapl_pm_notifier);
+
+	return ret;
+}
+
+static void __exit rapl_exit(void)
+{
+	platform_device_unregister(rapl_msr_platdev);
+	unregister_pm_notifier(&rapl_pm_notifier);
+}
+
+fs_initcall(rapl_init);
+module_exit(rapl_exit);
+
+MODULE_DESCRIPTION("Intel Runtime Average Power Limit (RAPL) common code");
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/powercap/intel_rapl_msr.c b/drivers/powercap/intel_rapl_msr.c
new file mode 100644
index 000000000..65adb4cba
--- /dev/null
+++ b/drivers/powercap/intel_rapl_msr.c
@@ -0,0 +1,221 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Running Average Power Limit (RAPL) Driver via MSR interface
+ * Copyright (c) 2019, Intel Corporation.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/log2.h>
+#include <linux/bitmap.h>
+#include <linux/delay.h>
+#include <linux/sysfs.h>
+#include <linux/cpu.h>
+#include <linux/powercap.h>
+#include <linux/suspend.h>
+#include <linux/intel_rapl.h>
+#include <linux/processor.h>
+#include <linux/platform_device.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+
+/* Local defines */
+#define MSR_PLATFORM_POWER_LIMIT	0x0000065C
+#define MSR_VR_CURRENT_CONFIG		0x00000601
+
+/* private data for RAPL MSR Interface */
+static struct rapl_if_priv *rapl_msr_priv;
+
+static struct rapl_if_priv rapl_msr_priv_intel = {
+	.reg_unit = MSR_RAPL_POWER_UNIT,
+	.regs[RAPL_DOMAIN_PACKAGE] = {
+		MSR_PKG_POWER_LIMIT, MSR_PKG_ENERGY_STATUS, MSR_PKG_PERF_STATUS, 0, MSR_PKG_POWER_INFO },
+	.regs[RAPL_DOMAIN_PP0] = {
+		MSR_PP0_POWER_LIMIT, MSR_PP0_ENERGY_STATUS, 0, MSR_PP0_POLICY, 0 },
+	.regs[RAPL_DOMAIN_PP1] = {
+		MSR_PP1_POWER_LIMIT, MSR_PP1_ENERGY_STATUS, 0, MSR_PP1_POLICY, 0 },
+	.regs[RAPL_DOMAIN_DRAM] = {
+		MSR_DRAM_POWER_LIMIT, MSR_DRAM_ENERGY_STATUS, MSR_DRAM_PERF_STATUS, 0, MSR_DRAM_POWER_INFO },
+	.regs[RAPL_DOMAIN_PLATFORM] = {
+		MSR_PLATFORM_POWER_LIMIT, MSR_PLATFORM_ENERGY_STATUS, 0, 0, 0},
+	.limits[RAPL_DOMAIN_PACKAGE] = 2,
+	.limits[RAPL_DOMAIN_PLATFORM] = 2,
+};
+
+static struct rapl_if_priv rapl_msr_priv_amd = {
+	.reg_unit = MSR_AMD_RAPL_POWER_UNIT,
+	.regs[RAPL_DOMAIN_PACKAGE] = {
+		0, MSR_AMD_PKG_ENERGY_STATUS, 0, 0, 0 },
+	.regs[RAPL_DOMAIN_PP0] = {
+		0, MSR_AMD_CORE_ENERGY_STATUS, 0, 0, 0 },
+};
+
+/* Handles CPU hotplug on multi-socket systems.
+ * If a CPU goes online as the first CPU of the physical package
+ * we add the RAPL package to the system. Similarly, when the last
+ * CPU of the package is removed, we remove the RAPL package and its
+ * associated domains. Cooling devices are handled accordingly at
+ * per-domain level.
+ */
+static int rapl_cpu_online(unsigned int cpu)
+{
+	struct rapl_package *rp;
+
+	rp = rapl_find_package_domain(cpu, rapl_msr_priv);
+	if (!rp) {
+		rp = rapl_add_package(cpu, rapl_msr_priv);
+		if (IS_ERR(rp))
+			return PTR_ERR(rp);
+	}
+	cpumask_set_cpu(cpu, &rp->cpumask);
+	return 0;
+}
+
+static int rapl_cpu_down_prep(unsigned int cpu)
+{
+	struct rapl_package *rp;
+	int lead_cpu;
+
+	rp = rapl_find_package_domain(cpu, rapl_msr_priv);
+	if (!rp)
+		return 0;
+
+	cpumask_clear_cpu(cpu, &rp->cpumask);
+	lead_cpu = cpumask_first(&rp->cpumask);
+	if (lead_cpu >= nr_cpu_ids)
+		rapl_remove_package(rp);
+	else if (rp->lead_cpu == cpu)
+		rp->lead_cpu = lead_cpu;
+	return 0;
+}
+
+static int rapl_msr_read_raw(int cpu, struct reg_action *ra)
+{
+	u32 msr = (u32)ra->reg;
+
+	if (rdmsrl_safe_on_cpu(cpu, msr, &ra->value)) {
+		pr_debug("failed to read msr 0x%x on cpu %d\n", msr, cpu);
+		return -EIO;
+	}
+	ra->value &= ra->mask;
+	return 0;
+}
+
+static void rapl_msr_update_func(void *info)
+{
+	struct reg_action *ra = info;
+	u32 msr = (u32)ra->reg;
+	u64 val;
+
+	ra->err = rdmsrl_safe(msr, &val);
+	if (ra->err)
+		return;
+
+	val &= ~ra->mask;
+	val |= ra->value;
+
+	ra->err = wrmsrl_safe(msr, val);
+}
+
+static int rapl_msr_write_raw(int cpu, struct reg_action *ra)
+{
+	int ret;
+
+	ret = smp_call_function_single(cpu, rapl_msr_update_func, ra, 1);
+	if (WARN_ON_ONCE(ret))
+		return ret;
+
+	return ra->err;
+}
+
+/* List of verified CPUs. */
+static const struct x86_cpu_id pl4_support_ids[] = {
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_TIGERLAKE_L, X86_FEATURE_ANY },
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ALDERLAKE, X86_FEATURE_ANY },
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ALDERLAKE_L, X86_FEATURE_ANY },
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ALDERLAKE_N, X86_FEATURE_ANY },
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_RAPTORLAKE, X86_FEATURE_ANY },
+	{ X86_VENDOR_INTEL, 6, INTEL_FAM6_RAPTORLAKE_P, X86_FEATURE_ANY },
+	{}
+};
+
+static int rapl_msr_probe(struct platform_device *pdev)
+{
+	const struct x86_cpu_id *id = x86_match_cpu(pl4_support_ids);
+	int ret;
+
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_INTEL:
+		rapl_msr_priv = &rapl_msr_priv_intel;
+		break;
+	case X86_VENDOR_HYGON:
+	case X86_VENDOR_AMD:
+		rapl_msr_priv = &rapl_msr_priv_amd;
+		break;
+	default:
+		pr_err("intel-rapl does not support CPU vendor %d\n", boot_cpu_data.x86_vendor);
+		return -ENODEV;
+	}
+	rapl_msr_priv->read_raw = rapl_msr_read_raw;
+	rapl_msr_priv->write_raw = rapl_msr_write_raw;
+
+	if (id) {
+		rapl_msr_priv->limits[RAPL_DOMAIN_PACKAGE] = 3;
+		rapl_msr_priv->regs[RAPL_DOMAIN_PACKAGE][RAPL_DOMAIN_REG_PL4] =
+			MSR_VR_CURRENT_CONFIG;
+		pr_info("PL4 support detected.\n");
+	}
+
+	rapl_msr_priv->control_type = powercap_register_control_type(NULL, "intel-rapl", NULL);
+	if (IS_ERR(rapl_msr_priv->control_type)) {
+		pr_debug("failed to register powercap control_type.\n");
+		return PTR_ERR(rapl_msr_priv->control_type);
+	}
+
+	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "powercap/rapl:online",
+				rapl_cpu_online, rapl_cpu_down_prep);
+	if (ret < 0)
+		goto out;
+	rapl_msr_priv->pcap_rapl_online = ret;
+
+	return 0;
+
+out:
+	if (ret)
+		powercap_unregister_control_type(rapl_msr_priv->control_type);
+	return ret;
+}
+
+static int rapl_msr_remove(struct platform_device *pdev)
+{
+	cpuhp_remove_state(rapl_msr_priv->pcap_rapl_online);
+	powercap_unregister_control_type(rapl_msr_priv->control_type);
+	return 0;
+}
+
+static const struct platform_device_id rapl_msr_ids[] = {
+	{ .name = "intel_rapl_msr", },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, rapl_msr_ids);
+
+static struct platform_driver intel_rapl_msr_driver = {
+	.probe = rapl_msr_probe,
+	.remove = rapl_msr_remove,
+	.id_table = rapl_msr_ids,
+	.driver = {
+		.name = "intel_rapl_msr",
+	},
+};
+
+module_platform_driver(intel_rapl_msr_driver);
+
+MODULE_DESCRIPTION("Driver for Intel RAPL (Running Average Power Limit) control via MSR interface");
+MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/powercap/powercap_sys.c b/drivers/powercap/powercap_sys.c
new file mode 100644
index 000000000..ff736b006
--- /dev/null
+++ b/drivers/powercap/powercap_sys.c
@@ -0,0 +1,681 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Power capping class
+ * Copyright (c) 2013, Intel Corporation.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/powercap.h>
+
+#define to_powercap_zone(n) container_of(n, struct powercap_zone, dev)
+#define to_powercap_control_type(n) \
+			container_of(n, struct powercap_control_type, dev)
+
+/* Power zone show function */
+#define define_power_zone_show(_attr)		\
+static ssize_t _attr##_show(struct device *dev, \
+					struct device_attribute *dev_attr,\
+					char *buf) \
+{ \
+	u64 value; \
+	ssize_t len = -EINVAL; \
+	struct powercap_zone *power_zone = to_powercap_zone(dev); \
+	\
+	if (power_zone->ops->get_##_attr) { \
+		if (!power_zone->ops->get_##_attr(power_zone, &value)) \
+			len = sprintf(buf, "%lld\n", value); \
+	} \
+	\
+	return len; \
+}
+
+/* The only meaningful input is 0 (reset), others are silently ignored */
+#define define_power_zone_store(_attr)		\
+static ssize_t _attr##_store(struct device *dev,\
+				struct device_attribute *dev_attr, \
+				const char *buf, size_t count) \
+{ \
+	int err; \
+	struct powercap_zone *power_zone = to_powercap_zone(dev); \
+	u64 value; \
+	\
+	err = kstrtoull(buf, 10, &value); \
+	if (err) \
+		return -EINVAL; \
+	if (value) \
+		return count; \
+	if (power_zone->ops->reset_##_attr) { \
+		if (!power_zone->ops->reset_##_attr(power_zone)) \
+			return count; \
+	} \
+	\
+	return -EINVAL; \
+}
+
+/* Power zone constraint show function */
+#define define_power_zone_constraint_show(_attr) \
+static ssize_t show_constraint_##_attr(struct device *dev, \
+				struct device_attribute *dev_attr,\
+				char *buf) \
+{ \
+	u64 value; \
+	ssize_t len = -ENODATA; \
+	struct powercap_zone *power_zone = to_powercap_zone(dev); \
+	int id; \
+	struct powercap_zone_constraint *pconst;\
+	\
+	if (!sscanf(dev_attr->attr.name, "constraint_%d_", &id)) \
+		return -EINVAL; \
+	if (id >= power_zone->const_id_cnt)	\
+		return -EINVAL; \
+	pconst = &power_zone->constraints[id]; \
+	if (pconst && pconst->ops && pconst->ops->get_##_attr) { \
+		if (!pconst->ops->get_##_attr(power_zone, id, &value)) \
+			len = sprintf(buf, "%lld\n", value); \
+	} \
+	\
+	return len; \
+}
+
+/* Power zone constraint store function */
+#define define_power_zone_constraint_store(_attr) \
+static ssize_t store_constraint_##_attr(struct device *dev,\
+				struct device_attribute *dev_attr, \
+				const char *buf, size_t count) \
+{ \
+	int err; \
+	u64 value; \
+	struct powercap_zone *power_zone = to_powercap_zone(dev); \
+	int id; \
+	struct powercap_zone_constraint *pconst;\
+	\
+	if (!sscanf(dev_attr->attr.name, "constraint_%d_", &id)) \
+		return -EINVAL; \
+	if (id >= power_zone->const_id_cnt)	\
+		return -EINVAL; \
+	pconst = &power_zone->constraints[id]; \
+	err = kstrtoull(buf, 10, &value); \
+	if (err) \
+		return -EINVAL; \
+	if (pconst && pconst->ops && pconst->ops->set_##_attr) { \
+		if (!pconst->ops->set_##_attr(power_zone, id, value)) \
+			return count; \
+	} \
+	\
+	return -ENODATA; \
+}
+
+/* Power zone information callbacks */
+define_power_zone_show(power_uw);
+define_power_zone_show(max_power_range_uw);
+define_power_zone_show(energy_uj);
+define_power_zone_store(energy_uj);
+define_power_zone_show(max_energy_range_uj);
+
+/* Power zone attributes */
+static DEVICE_ATTR_RO(max_power_range_uw);
+static DEVICE_ATTR_RO(power_uw);
+static DEVICE_ATTR_RO(max_energy_range_uj);
+static DEVICE_ATTR_RW(energy_uj);
+
+/* Power zone constraint attributes callbacks */
+define_power_zone_constraint_show(power_limit_uw);
+define_power_zone_constraint_store(power_limit_uw);
+define_power_zone_constraint_show(time_window_us);
+define_power_zone_constraint_store(time_window_us);
+define_power_zone_constraint_show(max_power_uw);
+define_power_zone_constraint_show(min_power_uw);
+define_power_zone_constraint_show(max_time_window_us);
+define_power_zone_constraint_show(min_time_window_us);
+
+/* For one time seeding of constraint device attributes */
+struct powercap_constraint_attr {
+	struct device_attribute power_limit_attr;
+	struct device_attribute time_window_attr;
+	struct device_attribute max_power_attr;
+	struct device_attribute min_power_attr;
+	struct device_attribute max_time_window_attr;
+	struct device_attribute min_time_window_attr;
+	struct device_attribute name_attr;
+};
+
+static struct powercap_constraint_attr
+				constraint_attrs[MAX_CONSTRAINTS_PER_ZONE];
+
+/* A list of powercap control_types */
+static LIST_HEAD(powercap_cntrl_list);
+/* Mutex to protect list of powercap control_types */
+static DEFINE_MUTEX(powercap_cntrl_list_lock);
+
+#define POWERCAP_CONSTRAINT_NAME_LEN	30 /* Some limit to avoid overflow */
+static ssize_t show_constraint_name(struct device *dev,
+				struct device_attribute *dev_attr,
+				char *buf)
+{
+	const char *name;
+	struct powercap_zone *power_zone = to_powercap_zone(dev);
+	int id;
+	ssize_t len = -ENODATA;
+	struct powercap_zone_constraint *pconst;
+
+	if (!sscanf(dev_attr->attr.name, "constraint_%d_", &id))
+		return -EINVAL;
+	if (id >= power_zone->const_id_cnt)
+		return -EINVAL;
+	pconst = &power_zone->constraints[id];
+
+	if (pconst && pconst->ops && pconst->ops->get_name) {
+		name = pconst->ops->get_name(power_zone, id);
+		if (name) {
+			sprintf(buf, "%.*s\n", POWERCAP_CONSTRAINT_NAME_LEN - 1,
+				name);
+			len = strlen(buf);
+		}
+	}
+
+	return len;
+}
+
+static int create_constraint_attribute(int id, const char *name,
+				int mode,
+				struct device_attribute *dev_attr,
+				ssize_t (*show)(struct device *,
+					struct device_attribute *, char *),
+				ssize_t (*store)(struct device *,
+					struct device_attribute *,
+				const char *, size_t)
+				)
+{
+
+	dev_attr->attr.name = kasprintf(GFP_KERNEL, "constraint_%d_%s",
+								id, name);
+	if (!dev_attr->attr.name)
+		return -ENOMEM;
+	dev_attr->attr.mode = mode;
+	dev_attr->show = show;
+	dev_attr->store = store;
+
+	return 0;
+}
+
+static void free_constraint_attributes(void)
+{
+	int i;
+
+	for (i = 0; i < MAX_CONSTRAINTS_PER_ZONE; ++i) {
+		kfree(constraint_attrs[i].power_limit_attr.attr.name);
+		kfree(constraint_attrs[i].time_window_attr.attr.name);
+		kfree(constraint_attrs[i].name_attr.attr.name);
+		kfree(constraint_attrs[i].max_power_attr.attr.name);
+		kfree(constraint_attrs[i].min_power_attr.attr.name);
+		kfree(constraint_attrs[i].max_time_window_attr.attr.name);
+		kfree(constraint_attrs[i].min_time_window_attr.attr.name);
+	}
+}
+
+static int seed_constraint_attributes(void)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < MAX_CONSTRAINTS_PER_ZONE; ++i) {
+		ret = create_constraint_attribute(i, "power_limit_uw",
+					S_IWUSR | S_IRUGO,
+					&constraint_attrs[i].power_limit_attr,
+					show_constraint_power_limit_uw,
+					store_constraint_power_limit_uw);
+		if (ret)
+			goto err_alloc;
+		ret = create_constraint_attribute(i, "time_window_us",
+					S_IWUSR | S_IRUGO,
+					&constraint_attrs[i].time_window_attr,
+					show_constraint_time_window_us,
+					store_constraint_time_window_us);
+		if (ret)
+			goto err_alloc;
+		ret = create_constraint_attribute(i, "name", S_IRUGO,
+				&constraint_attrs[i].name_attr,
+				show_constraint_name,
+				NULL);
+		if (ret)
+			goto err_alloc;
+		ret = create_constraint_attribute(i, "max_power_uw", S_IRUGO,
+				&constraint_attrs[i].max_power_attr,
+				show_constraint_max_power_uw,
+				NULL);
+		if (ret)
+			goto err_alloc;
+		ret = create_constraint_attribute(i, "min_power_uw", S_IRUGO,
+				&constraint_attrs[i].min_power_attr,
+				show_constraint_min_power_uw,
+				NULL);
+		if (ret)
+			goto err_alloc;
+		ret = create_constraint_attribute(i, "max_time_window_us",
+				S_IRUGO,
+				&constraint_attrs[i].max_time_window_attr,
+				show_constraint_max_time_window_us,
+				NULL);
+		if (ret)
+			goto err_alloc;
+		ret = create_constraint_attribute(i, "min_time_window_us",
+				S_IRUGO,
+				&constraint_attrs[i].min_time_window_attr,
+				show_constraint_min_time_window_us,
+				NULL);
+		if (ret)
+			goto err_alloc;
+
+	}
+
+	return 0;
+
+err_alloc:
+	free_constraint_attributes();
+
+	return ret;
+}
+
+static int create_constraints(struct powercap_zone *power_zone,
+			int nr_constraints,
+			const struct powercap_zone_constraint_ops *const_ops)
+{
+	int i;
+	int ret = 0;
+	int count;
+	struct powercap_zone_constraint *pconst;
+
+	if (!power_zone || !const_ops || !const_ops->get_power_limit_uw ||
+					!const_ops->set_power_limit_uw ||
+					!const_ops->get_time_window_us ||
+					!const_ops->set_time_window_us)
+		return -EINVAL;
+
+	count = power_zone->zone_attr_count;
+	for (i = 0; i < nr_constraints; ++i) {
+		pconst = &power_zone->constraints[i];
+		pconst->ops = const_ops;
+		pconst->id = power_zone->const_id_cnt;
+		power_zone->const_id_cnt++;
+		power_zone->zone_dev_attrs[count++] =
+				&constraint_attrs[i].power_limit_attr.attr;
+		power_zone->zone_dev_attrs[count++] =
+				&constraint_attrs[i].time_window_attr.attr;
+		if (pconst->ops->get_name)
+			power_zone->zone_dev_attrs[count++] =
+				&constraint_attrs[i].name_attr.attr;
+		if (pconst->ops->get_max_power_uw)
+			power_zone->zone_dev_attrs[count++] =
+				&constraint_attrs[i].max_power_attr.attr;
+		if (pconst->ops->get_min_power_uw)
+			power_zone->zone_dev_attrs[count++] =
+				&constraint_attrs[i].min_power_attr.attr;
+		if (pconst->ops->get_max_time_window_us)
+			power_zone->zone_dev_attrs[count++] =
+				&constraint_attrs[i].max_time_window_attr.attr;
+		if (pconst->ops->get_min_time_window_us)
+			power_zone->zone_dev_attrs[count++] =
+				&constraint_attrs[i].min_time_window_attr.attr;
+	}
+	power_zone->zone_attr_count = count;
+
+	return ret;
+}
+
+static bool control_type_valid(void *control_type)
+{
+	struct powercap_control_type *pos = NULL;
+	bool found = false;
+
+	mutex_lock(&powercap_cntrl_list_lock);
+
+	list_for_each_entry(pos, &powercap_cntrl_list, node) {
+		if (pos == control_type) {
+			found = true;
+			break;
+		}
+	}
+	mutex_unlock(&powercap_cntrl_list_lock);
+
+	return found;
+}
+
+static ssize_t name_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct powercap_zone *power_zone = to_powercap_zone(dev);
+
+	return sprintf(buf, "%s\n", power_zone->name);
+}
+
+static DEVICE_ATTR_RO(name);
+
+/* Create zone and attributes in sysfs */
+static void create_power_zone_common_attributes(
+					struct powercap_zone *power_zone)
+{
+	int count = 0;
+
+	power_zone->zone_dev_attrs[count++] = &dev_attr_name.attr;
+	if (power_zone->ops->get_max_energy_range_uj)
+		power_zone->zone_dev_attrs[count++] =
+					&dev_attr_max_energy_range_uj.attr;
+	if (power_zone->ops->get_energy_uj) {
+		if (power_zone->ops->reset_energy_uj)
+			dev_attr_energy_uj.attr.mode = S_IWUSR | S_IRUSR;
+		else
+			dev_attr_energy_uj.attr.mode = S_IRUSR;
+		power_zone->zone_dev_attrs[count++] =
+					&dev_attr_energy_uj.attr;
+	}
+	if (power_zone->ops->get_power_uw)
+		power_zone->zone_dev_attrs[count++] =
+					&dev_attr_power_uw.attr;
+	if (power_zone->ops->get_max_power_range_uw)
+		power_zone->zone_dev_attrs[count++] =
+					&dev_attr_max_power_range_uw.attr;
+	power_zone->zone_dev_attrs[count] = NULL;
+	power_zone->zone_attr_count = count;
+}
+
+static void powercap_release(struct device *dev)
+{
+	bool allocated;
+
+	if (dev->parent) {
+		struct powercap_zone *power_zone = to_powercap_zone(dev);
+
+		/* Store flag as the release() may free memory */
+		allocated = power_zone->allocated;
+		/* Remove id from parent idr struct */
+		idr_remove(power_zone->parent_idr, power_zone->id);
+		/* Destroy idrs allocated for this zone */
+		idr_destroy(&power_zone->idr);
+		kfree(power_zone->name);
+		kfree(power_zone->zone_dev_attrs);
+		kfree(power_zone->constraints);
+		if (power_zone->ops->release)
+			power_zone->ops->release(power_zone);
+		if (allocated)
+			kfree(power_zone);
+	} else {
+		struct powercap_control_type *control_type =
+						to_powercap_control_type(dev);
+
+		/* Store flag as the release() may free memory */
+		allocated = control_type->allocated;
+		idr_destroy(&control_type->idr);
+		mutex_destroy(&control_type->lock);
+		if (control_type->ops && control_type->ops->release)
+			control_type->ops->release(control_type);
+		if (allocated)
+			kfree(control_type);
+	}
+}
+
+static ssize_t enabled_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	bool mode = true;
+
+	/* Default is enabled */
+	if (dev->parent) {
+		struct powercap_zone *power_zone = to_powercap_zone(dev);
+		if (power_zone->ops->get_enable)
+			if (power_zone->ops->get_enable(power_zone, &mode))
+				mode = false;
+	} else {
+		struct powercap_control_type *control_type =
+						to_powercap_control_type(dev);
+		if (control_type->ops && control_type->ops->get_enable)
+			if (control_type->ops->get_enable(control_type, &mode))
+				mode = false;
+	}
+
+	return sprintf(buf, "%d\n", mode);
+}
+
+static ssize_t enabled_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf,  size_t len)
+{
+	bool mode;
+
+	if (strtobool(buf, &mode))
+		return -EINVAL;
+	if (dev->parent) {
+		struct powercap_zone *power_zone = to_powercap_zone(dev);
+		if (power_zone->ops->set_enable)
+			if (!power_zone->ops->set_enable(power_zone, mode))
+				return len;
+	} else {
+		struct powercap_control_type *control_type =
+						to_powercap_control_type(dev);
+		if (control_type->ops && control_type->ops->set_enable)
+			if (!control_type->ops->set_enable(control_type, mode))
+				return len;
+	}
+
+	return -ENOSYS;
+}
+
+static DEVICE_ATTR_RW(enabled);
+
+static struct attribute *powercap_attrs[] = {
+	&dev_attr_enabled.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(powercap);
+
+static struct class powercap_class = {
+	.name = "powercap",
+	.dev_release = powercap_release,
+	.dev_groups = powercap_groups,
+};
+
+struct powercap_zone *powercap_register_zone(
+			struct powercap_zone *power_zone,
+			struct powercap_control_type *control_type,
+			const char *name,
+			struct powercap_zone *parent,
+			const struct powercap_zone_ops *ops,
+			int nr_constraints,
+			const struct powercap_zone_constraint_ops *const_ops)
+{
+	int result;
+	int nr_attrs;
+
+	if (!name || !control_type || !ops ||
+			nr_constraints > MAX_CONSTRAINTS_PER_ZONE ||
+			(!ops->get_energy_uj && !ops->get_power_uw) ||
+			!control_type_valid(control_type))
+		return ERR_PTR(-EINVAL);
+
+	if (power_zone) {
+		if (!ops->release)
+			return ERR_PTR(-EINVAL);
+		memset(power_zone, 0, sizeof(*power_zone));
+	} else {
+		power_zone = kzalloc(sizeof(*power_zone), GFP_KERNEL);
+		if (!power_zone)
+			return ERR_PTR(-ENOMEM);
+		power_zone->allocated = true;
+	}
+	power_zone->ops = ops;
+	power_zone->control_type_inst = control_type;
+	if (!parent) {
+		power_zone->dev.parent = &control_type->dev;
+		power_zone->parent_idr = &control_type->idr;
+	} else {
+		power_zone->dev.parent = &parent->dev;
+		power_zone->parent_idr = &parent->idr;
+	}
+	power_zone->dev.class = &powercap_class;
+
+	mutex_lock(&control_type->lock);
+	/* Using idr to get the unique id */
+	result = idr_alloc(power_zone->parent_idr, NULL, 0, 0, GFP_KERNEL);
+	if (result < 0)
+		goto err_idr_alloc;
+
+	power_zone->id = result;
+	idr_init(&power_zone->idr);
+	result = -ENOMEM;
+	power_zone->name = kstrdup(name, GFP_KERNEL);
+	if (!power_zone->name)
+		goto err_name_alloc;
+	power_zone->constraints = kcalloc(nr_constraints,
+					  sizeof(*power_zone->constraints),
+					  GFP_KERNEL);
+	if (!power_zone->constraints)
+		goto err_const_alloc;
+
+	nr_attrs = nr_constraints * POWERCAP_CONSTRAINTS_ATTRS +
+						POWERCAP_ZONE_MAX_ATTRS + 1;
+	power_zone->zone_dev_attrs = kcalloc(nr_attrs, sizeof(void *),
+					     GFP_KERNEL);
+	if (!power_zone->zone_dev_attrs)
+		goto err_attr_alloc;
+	create_power_zone_common_attributes(power_zone);
+	result = create_constraints(power_zone, nr_constraints, const_ops);
+	if (result)
+		goto err_dev_ret;
+
+	power_zone->zone_dev_attrs[power_zone->zone_attr_count] = NULL;
+	power_zone->dev_zone_attr_group.attrs = power_zone->zone_dev_attrs;
+	power_zone->dev_attr_groups[0] = &power_zone->dev_zone_attr_group;
+	power_zone->dev_attr_groups[1] = NULL;
+	power_zone->dev.groups = power_zone->dev_attr_groups;
+	dev_set_name(&power_zone->dev, "%s:%x",
+					dev_name(power_zone->dev.parent),
+					power_zone->id);
+	result = device_register(&power_zone->dev);
+	if (result) {
+		put_device(&power_zone->dev);
+		mutex_unlock(&control_type->lock);
+
+		return ERR_PTR(result);
+	}
+
+	control_type->nr_zones++;
+	mutex_unlock(&control_type->lock);
+
+	return power_zone;
+
+err_dev_ret:
+	kfree(power_zone->zone_dev_attrs);
+err_attr_alloc:
+	kfree(power_zone->constraints);
+err_const_alloc:
+	kfree(power_zone->name);
+err_name_alloc:
+	idr_remove(power_zone->parent_idr, power_zone->id);
+err_idr_alloc:
+	if (power_zone->allocated)
+		kfree(power_zone);
+	mutex_unlock(&control_type->lock);
+
+	return ERR_PTR(result);
+}
+EXPORT_SYMBOL_GPL(powercap_register_zone);
+
+int powercap_unregister_zone(struct powercap_control_type *control_type,
+				struct powercap_zone *power_zone)
+{
+	if (!power_zone || !control_type)
+		return -EINVAL;
+
+	mutex_lock(&control_type->lock);
+	control_type->nr_zones--;
+	mutex_unlock(&control_type->lock);
+
+	device_unregister(&power_zone->dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(powercap_unregister_zone);
+
+struct powercap_control_type *powercap_register_control_type(
+				struct powercap_control_type *control_type,
+				const char *name,
+				const struct powercap_control_type_ops *ops)
+{
+	int result;
+
+	if (!name)
+		return ERR_PTR(-EINVAL);
+	if (control_type) {
+		if (!ops || !ops->release)
+			return ERR_PTR(-EINVAL);
+		memset(control_type, 0, sizeof(*control_type));
+	} else {
+		control_type = kzalloc(sizeof(*control_type), GFP_KERNEL);
+		if (!control_type)
+			return ERR_PTR(-ENOMEM);
+		control_type->allocated = true;
+	}
+	mutex_init(&control_type->lock);
+	control_type->ops = ops;
+	INIT_LIST_HEAD(&control_type->node);
+	control_type->dev.class = &powercap_class;
+	dev_set_name(&control_type->dev, "%s", name);
+	result = device_register(&control_type->dev);
+	if (result) {
+		if (control_type->allocated)
+			kfree(control_type);
+		return ERR_PTR(result);
+	}
+	idr_init(&control_type->idr);
+
+	mutex_lock(&powercap_cntrl_list_lock);
+	list_add_tail(&control_type->node, &powercap_cntrl_list);
+	mutex_unlock(&powercap_cntrl_list_lock);
+
+	return control_type;
+}
+EXPORT_SYMBOL_GPL(powercap_register_control_type);
+
+int powercap_unregister_control_type(struct powercap_control_type *control_type)
+{
+	struct powercap_control_type *pos = NULL;
+
+	if (control_type->nr_zones) {
+		dev_err(&control_type->dev, "Zones of this type still not freed\n");
+		return -EINVAL;
+	}
+	mutex_lock(&powercap_cntrl_list_lock);
+	list_for_each_entry(pos, &powercap_cntrl_list, node) {
+		if (pos == control_type) {
+			list_del(&control_type->node);
+			mutex_unlock(&powercap_cntrl_list_lock);
+			device_unregister(&control_type->dev);
+			return 0;
+		}
+	}
+	mutex_unlock(&powercap_cntrl_list_lock);
+
+	return -ENODEV;
+}
+EXPORT_SYMBOL_GPL(powercap_unregister_control_type);
+
+static int __init powercap_init(void)
+{
+	int result;
+
+	result = seed_constraint_attributes();
+	if (result)
+		return result;
+
+	return class_register(&powercap_class);
+}
+
+fs_initcall(powercap_init);
+
+MODULE_DESCRIPTION("PowerCap sysfs Driver");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");