Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1527 insertions, 0 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
new file mode 100644
index 000000000..070e4403c
--- /dev/null
+++ b/drivers/regulator/Kconfig
@@ -0,0 +1,1527 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig REGULATOR
+	bool "Voltage and Current Regulator Support"
+	select LINEAR_RANGES
+	help
+	  Generic Voltage and Current Regulator support.
+
+	  This framework is designed to provide a generic interface to voltage
+	  and current regulators within the Linux kernel. It's intended to
+	  provide voltage and current control to client or consumer drivers and
+	  also provide status information to user space applications through a
+	  sysfs interface.
+
+	  The intention is to allow systems to dynamically control regulator
+	  output in order to save power and prolong battery life. This applies
+	  to both voltage regulators (where voltage output is controllable) and
+	  current sinks (where current output is controllable).
+
+	  This framework safely compiles out if not selected so that client
+	  drivers can still be used in systems with no software controllable
+	  regulators.
+
+	  If unsure, say no.
+
+
+if REGULATOR
+
+config REGULATOR_DEBUG
+	bool "Regulator debug support"
+	help
+	  Say yes here to enable debugging support.
+
+config REGULATOR_FIXED_VOLTAGE
+	tristate "Fixed voltage regulator support"
+	help
+	  This driver provides support for fixed voltage regulators,
+	  useful for systems which use a combination of software
+	  managed regulators and simple non-configurable regulators.
+
+config REGULATOR_VIRTUAL_CONSUMER
+	tristate "Virtual regulator consumer support"
+	help
+	  This driver provides a virtual consumer for the voltage and
+	  current regulator API which provides sysfs controls for
+	  configuring the supplies requested.  This is mainly useful
+	  for test purposes.
+
+	  If unsure, say no.
+
+config REGULATOR_USERSPACE_CONSUMER
+	tristate "Userspace regulator consumer support"
+	help
+	  There are some classes of devices that are controlled entirely
+	  from user space. Userspace consumer driver provides ability to
+	  control power supplies for such devices.
+
+	  If unsure, say no.
+
+config REGULATOR_88PG86X
+	tristate "Marvell 88PG86X voltage regulators"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports Marvell 88PG867 and 88PG868 voltage regulators.
+	  They provide two I2C-controlled DC/DC step-down converters with
+	  sleep mode and separate enable pins.
+
+config REGULATOR_88PM800
+	tristate "Marvell 88PM800 Power regulators"
+	depends on MFD_88PM800
+	help
+	  This driver supports Marvell 88PM800 voltage regulator chips.
+	  It delivers digitally programmable output,
+	  the voltage is programmed via I2C interface.
+	  It's suitable to support PXA988 chips to control VCC_MAIN and
+	  various voltages.
+
+config REGULATOR_88PM8607
+	tristate "Marvell 88PM8607 Power regulators"
+	depends on MFD_88PM860X=y
+	help
+	  This driver supports 88PM8607 voltage regulator chips.
+
+config REGULATOR_ACT8865
+	tristate "Active-semi act8865 voltage regulator"
+	depends on I2C
+	depends on POWER_SUPPLY
+	select REGMAP_I2C
+	help
+	  This driver controls a active-semi act8865 voltage output
+	  regulator via I2C bus.
+
+config REGULATOR_ACT8945A
+	tristate "Active-semi ACT8945A voltage regulator"
+	depends on MFD_ACT8945A
+	help
+	  This driver controls a active-semi ACT8945A voltage regulator
+	  via I2C bus. The ACT8945A features three step-down DC/DC converters
+	  and four low-dropout linear regulators, along with a ActivePath
+	  battery charger.
+
+config REGULATOR_AD5398
+	tristate "Analog Devices AD5398/AD5821 regulators"
+	depends on I2C
+	help
+	  This driver supports AD5398 and AD5821 current regulator chips.
+	  If building into module, its name is ad5398.ko.
+
+config REGULATOR_ANATOP
+	tristate "Freescale i.MX on-chip ANATOP LDO regulators"
+	depends on ARCH_MXC || COMPILE_TEST
+	depends on MFD_SYSCON
+	help
+	  Say y here to support Freescale i.MX on-chip ANATOP LDOs
+	  regulators. It is recommended that this option be
+	  enabled on i.MX6 platform.
+
+config REGULATOR_AAT2870
+	tristate "AnalogicTech AAT2870 Regulators"
+	depends on MFD_AAT2870_CORE
+	help
+	  If you have a AnalogicTech AAT2870 say Y to enable the
+	  regulator driver.
+
+config REGULATOR_AB8500
+	bool "ST-Ericsson AB8500 Power Regulators"
+	depends on AB8500_CORE
+	help
+	  This driver supports the regulators found on the ST-Ericsson mixed
+	  signal AB8500 PMIC
+
+config REGULATOR_ARIZONA_LDO1
+	tristate "Cirrus Madera and Wolfson Arizona class devices LDO1"
+	depends on MFD_ARIZONA || MFD_MADERA
+	depends on SND_SOC
+	help
+	  Support for the LDO1 regulators found on Cirrus Logic Madera codecs
+	  and Wolfson Microelectronic Arizona codecs.
+
+config REGULATOR_ARIZONA_MICSUPP
+	tristate "Cirrus Madera and Wolfson Arizona class devices MICSUPP"
+	depends on MFD_ARIZONA || MFD_MADERA
+	depends on SND_SOC
+	help
+	  Support for the MICSUPP regulators found on Cirrus Logic Madera codecs
+	  and Wolfson Microelectronic Arizona codecs
+	  devices.
+
+config REGULATOR_ARM_SCMI
+	tristate "SCMI based regulator driver"
+	depends on ARM_SCMI_PROTOCOL && OF
+	help
+	  This adds the regulator driver support for ARM platforms using SCMI
+	  protocol for device voltage management.
+	  This driver uses SCMI Message Protocol driver to interact with the
+	  firmware providing the device Voltage functionality.
+
+config REGULATOR_AS3711
+	tristate "AS3711 PMIC"
+	depends on MFD_AS3711
+	help
+	  This driver provides support for the voltage regulators on the
+	  AS3711 PMIC
+
+config REGULATOR_AS3722
+	tristate "AMS AS3722 PMIC Regulators"
+	depends on MFD_AS3722
+	help
+	  This driver provides support for the voltage regulators on the
+	  AS3722 PMIC. This will enable support for all the software
+	  controllable DCDC/LDO regulators.
+
+config REGULATOR_ATC260X
+	tristate "Actions Semi ATC260x PMIC Regulators"
+	depends on MFD_ATC260X
+	help
+	  This driver provides support for the voltage regulators on the
+	  ATC260x PMICs. This will enable support for all the software
+	  controllable DCDC/LDO regulators.
+
+config REGULATOR_AXP20X
+	tristate "X-POWERS AXP20X PMIC Regulators"
+	depends on MFD_AXP20X
+	help
+	  This driver provides support for the voltage regulators on the
+	  AXP20X PMIC.
+
+config REGULATOR_BCM590XX
+	tristate "Broadcom BCM590xx PMU Regulators"
+	depends on MFD_BCM590XX
+	help
+	  This driver provides support for the voltage regulators on the
+	  BCM590xx PMUs. This will enable support for the software
+	  controllable LDO/Switching regulators.
+
+config REGULATOR_BD71815
+	tristate "ROHM BD71815 Power Regulator"
+	depends on MFD_ROHM_BD71828
+	select REGULATOR_ROHM
+	help
+	  This driver supports voltage regulators on ROHM BD71815 PMIC.
+	  This will enable support for the software controllable buck
+	  and LDO regulators and a current regulator for LEDs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called bd71815-regulator.
+
+config REGULATOR_BD71828
+	tristate "ROHM BD71828 Power Regulator"
+	depends on MFD_ROHM_BD71828
+	select REGULATOR_ROHM
+	help
+	  This driver supports voltage regulators on ROHM BD71828 PMIC.
+	  This will enable support for the software controllable buck
+	  and LDO regulators.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called bd71828-regulator.
+
+config REGULATOR_BD718XX
+	tristate "ROHM BD71837 Power Regulator"
+	depends on MFD_ROHM_BD718XX
+	select REGULATOR_ROHM
+	help
+	  This driver supports voltage regulators on ROHM BD71837 PMIC.
+	  This will enable support for the software controllable buck
+	  and LDO regulators.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called bd718x7-regulator.
+
+config REGULATOR_BD9571MWV
+	tristate "ROHM BD9571MWV Regulators"
+	depends on MFD_BD9571MWV
+	help
+	  This driver provides support for the voltage regulators on the
+	  ROHM BD9571MWV PMIC. This will enable support for the software
+	  controllable regulator and voltage sampling units.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called bd9571mwv-regulator.
+
+config REGULATOR_BD957XMUF
+	tristate "ROHM BD9576MUF and BD9573MUF Regulators"
+	depends on MFD_ROHM_BD957XMUF
+	help
+	  This driver supports voltage regulators on ROHM BD9576MUF and
+	  BD9573MUF PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called bd9576-regulator.
+
+config REGULATOR_CPCAP
+	tristate "Motorola CPCAP regulator"
+	depends on MFD_CPCAP
+	help
+	  Say y here for CPCAP regulator found on some Motorola phones
+	  and tablets such as Droid 4.
+
+config REGULATOR_CROS_EC
+	tristate "ChromeOS EC regulators"
+	depends on CROS_EC && OF
+	help
+	  This driver supports voltage regulators that is connected to ChromeOS
+	  EC and controlled through EC host commands.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called cros-ec-regulator.
+
+config REGULATOR_DA903X
+	tristate "Dialog Semiconductor DA9030/DA9034 regulators"
+	depends on PMIC_DA903X
+	depends on !CC_IS_CLANG # https://bugs.llvm.org/show_bug.cgi?id=38789
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  Dialog Semiconductor DA9030/DA9034 PMIC.
+
+config REGULATOR_DA9052
+	tristate "Dialog Semiconductor DA9052/DA9053 regulators"
+	depends on PMIC_DA9052
+	help
+	  This driver supports the voltage regulators of DA9052-BC and
+	  DA9053-AA/Bx PMIC.
+
+config REGULATOR_DA9055
+	tristate "Dialog Semiconductor DA9055 regulators"
+	depends on MFD_DA9055
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  Dialog Semiconductor DA9055 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9055-regulator.
+
+config REGULATOR_DA9062
+	tristate "Dialog Semiconductor DA9061/62 regulators"
+	depends on MFD_DA9062
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  DA9061 and DA9062 PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9062-regulator.
+
+config REGULATOR_DA9063
+	tristate "Dialog Semiconductor DA9063 regulators"
+	depends on MFD_DA9063 && OF
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  DA9063 PMICs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9063-regulator.
+
+config REGULATOR_DA9121
+	tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support for the Dialog Semiconductor DA9121.  The
+	  DA9121 is a single channel dual-phase buck converter controlled
+	  through an I2C interface.
+
+	  DA9121 Single-channel dual-phase 10A buck converter
+	  DA9130 Single-channel dual-phase 10A buck converter (Automotive)
+	  DA9217 Single-channel dual-phase  6A buck converter
+	  DA9122 Dual-channel single-phase  5A buck converter
+	  DA9131 Dual-channel single-phase  5A buck converter (Automotive)
+	  DA9220 Dual-channel single-phase  3A buck converter
+	  DA9132 Dual-channel single-phase  3A buck converter (Automotive)
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9121-regulator.
+
+config REGULATOR_DA9210
+	tristate "Dialog Semiconductor DA9210 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support for the Dialog Semiconductor DA9210.
+	  The DA9210 is a multi-phase synchronous step down
+	  converter 12A DC-DC Buck controlled through an I2C
+	  interface.
+
+config REGULATOR_DA9211
+	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support for the Dialog Semiconductor DA9211/DA9212
+	  /DA9213/DA9214/DA9215.
+	  The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous
+	  step down converter 12A or 16A DC-DC Buck controlled through an I2C
+	  interface.
+
+config REGULATOR_DBX500_PRCMU
+	bool
+
+config REGULATOR_DB8500_PRCMU
+	bool "ST-Ericsson DB8500 Voltage Domain Regulators"
+	depends on MFD_DB8500_PRCMU
+	select REGULATOR_DBX500_PRCMU
+	help
+	  This driver supports the voltage domain regulators controlled by the
+	  DB8500 PRCMU
+
+config REGULATOR_FAN53555
+	tristate "Fairchild FAN53555 Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports Fairchild FAN53555 Digitally Programmable
+	  TinyBuck Regulator. The FAN53555 is a step-down switching voltage
+	  regulator that delivers a digitally programmable output from an
+	  input voltage supply of 2.5V to 5.5V. The output voltage is
+	  programmed through an I2C interface.
+
+config REGULATOR_FAN53880
+	tristate "Fairchild FAN53880 Regulator"
+	depends on I2C && (OF || COMPILE_TEST)
+	select REGMAP_I2C
+	help
+	  This driver supports Fairchild (ON Semiconductor) FAN53880
+	  regulator. The regulator is a programmable power management IC
+	  (PMIC), it is controlled by I2C and provides one BUCK, one BOOST
+	  and four LDO outputs.
+
+config REGULATOR_GPIO
+	tristate "GPIO regulator support"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  This driver provides support for regulators that can be
+	  controlled via gpios.
+	  It is capable of supporting current and voltage regulators
+	  and the platform has to provide a mapping of GPIO-states
+	  to target volts/amps.
+
+config REGULATOR_HI6421
+	tristate "HiSilicon Hi6421 PMIC voltage regulator support"
+	depends on MFD_HI6421_PMIC && OF
+	help
+	  This driver provides support for the voltage regulators on the
+	  HiSilicon Hi6421 PMU / Codec IC.
+	  Hi6421 is a multi-function device which, on regulator part, provides
+	  21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
+	  of them come with support to either ECO (idle) or sleep mode.
+
+config REGULATOR_HI6421V530
+	tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
+	depends on MFD_HI6421_PMIC && OF
+	help
+	  This driver provides support for the voltage regulators on
+	  HiSilicon Hi6421v530 PMU / Codec IC.
+	  Hi6421v530 is a multi-function device which, on regulator part,
+	  provides 5 general purpose LDOs, and all of them come with support
+	  to either ECO (idle) or sleep mode.
+
+config REGULATOR_HI655X
+	tristate "Hisilicon HI655X PMIC regulators support"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on MFD_HI655X_PMIC && OF
+	help
+	  This driver provides support for the voltage regulators of the
+	  Hisilicon Hi655x PMIC device.
+
+config REGULATOR_HI6421V600
+	tristate "HiSilicon Hi6421v600 PMIC voltage regulator support"
+	depends on MFD_HI6421_SPMI && OF
+	select REGMAP
+	help
+	  This driver provides support for the voltage regulators on
+	  HiSilicon Hi6421v600 PMU / Codec IC.
+	  This is used on Kirin 3670 boards, like HiKey 970.
+
+config REGULATOR_ISL9305
+	tristate "Intersil ISL9305 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports ISL9305 voltage regulator chip.
+
+config REGULATOR_ISL6271A
+	tristate "Intersil ISL6271A Power regulator"
+	depends on I2C
+	help
+	  This driver supports ISL6271A voltage regulator chip.
+
+config REGULATOR_LM363X
+	tristate "TI LM363X voltage regulators"
+	depends on MFD_TI_LMU
+	help
+	  This driver supports LM3631, LM3632 and LM36274 voltage regulators for
+	  the LCD bias.
+	  One boost output voltage is configurable and always on.
+	  Other LDOs are used for the display module.
+
+config REGULATOR_LOCHNAGAR
+	tristate "Cirrus Logic Lochnagar regulator driver"
+	depends on MFD_LOCHNAGAR
+	help
+	  This enables regulator support on the Cirrus Logic Lochnagar audio
+	  development board.
+
+config REGULATOR_LP3971
+	tristate "National Semiconductors LP3971 PMIC regulator driver"
+	depends on I2C
+	help
+	 Say Y here to support the voltage regulators and convertors
+	 on National Semiconductors LP3971 PMIC
+
+config REGULATOR_LP3972
+	tristate "National Semiconductors LP3972 PMIC regulator driver"
+	depends on I2C
+	help
+	 Say Y here to support the voltage regulators and convertors
+	 on National Semiconductors LP3972 PMIC
+
+config REGULATOR_LP872X
+	tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports LP8720/LP8725 PMIC
+
+config REGULATOR_LP873X
+	tristate "TI LP873X Power regulators"
+	depends on MFD_TI_LP873X && OF
+	help
+	  This driver supports LP873X voltage regulator chips. LP873X
+	  provides two step-down converters and two general-purpose LDO
+	  voltage regulators. It supports software based voltage control
+	  for different voltage domains
+
+config REGULATOR_LP8755
+	tristate "TI LP8755 High Performance PMU driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports LP8755 High Performance PMU driver. This
+	  chip contains six step-down DC/DC converters which can support
+	  9 mode multiphase configuration.
+
+config REGULATOR_LP87565
+	tristate "TI LP87565 Power regulators"
+	depends on MFD_TI_LP87565 && OF
+	help
+	  This driver supports LP87565 voltage regulator chips. LP87565
+	  provides four step-down converters. It supports software based
+	  voltage control for different voltage domains
+
+config REGULATOR_LP8788
+	tristate "TI LP8788 Power Regulators"
+	depends on MFD_LP8788
+	help
+	  This driver supports LP8788 voltage regulator chip.
+
+config REGULATOR_LTC3589
+	tristate "LTC3589 8-output voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This enables support for the LTC3589, LTC3589-1, and LTC3589-2
+	  8-output regulators controlled via I2C.
+
+config REGULATOR_LTC3676
+	tristate "LTC3676 8-output voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This enables support for the LTC3676
+	  8-output regulators controlled via I2C.
+
+config REGULATOR_MAX14577
+	tristate "Maxim 14577/77836 regulator"
+	depends on MFD_MAX14577
+	help
+	  This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
+	  The MAX14577 regulators include safeout LDO and charger current
+	  regulator. The MAX77836 has two additional LDOs.
+
+config REGULATOR_MAX1586
+	tristate "Maxim 1586/1587 voltage regulator"
+	depends on I2C
+	help
+	  This driver controls a Maxim 1586 or 1587 voltage output
+	  regulator via I2C bus. The provided regulator is suitable
+	  for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
+
+config REGULATOR_MAX597X
+	tristate "Maxim 597x power switch and monitor"
+	depends on I2C
+	depends on OF
+	depends on MFD_MAX597X
+	help
+	  This driver controls a Maxim 5970/5978 switch via I2C bus.
+	  The MAX5970/5978 is a smart switch with no output regulation, but
+	  fault protection and voltage and current monitoring capabilities.
+
+config REGULATOR_MAX77620
+	tristate "Maxim 77620/MAX20024 voltage regulator"
+	depends on MFD_MAX77620 || COMPILE_TEST
+	help
+	  This driver controls Maxim MAX77620 voltage output regulator
+	  via I2C bus. The provided regulator is suitable for Tegra
+	  chip to control Step-Down DC-DC and LDOs. Say Y here to
+	  enable the regulator driver.
+
+config REGULATOR_MAX77650
+	tristate "Maxim MAX77650/77651 regulator support"
+	depends on MFD_MAX77650 || COMPILE_TEST
+	help
+	  Regulator driver for MAX77650/77651 PMIC from Maxim
+	  Semiconductor. This device has a SIMO with three independent
+	  power rails and an LDO.
+
+config REGULATOR_MAX8649
+	tristate "Maxim 8649 voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim 8649 voltage output regulator via
+	  I2C bus.
+
+config REGULATOR_MAX8660
+	tristate "Maxim 8660/8661 voltage regulator"
+	depends on I2C
+	help
+	  This driver controls a Maxim 8660/8661 voltage output
+	  regulator via I2C bus.
+
+config REGULATOR_MAX8893
+	tristate "Maxim 8893 voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim 8893 voltage output
+	  regulator via I2C bus.
+
+config REGULATOR_MAX8907
+	tristate "Maxim 8907 voltage regulator"
+	depends on MFD_MAX8907 || COMPILE_TEST
+	help
+	  This driver controls a Maxim 8907 voltage output regulator
+	  via I2C bus. The provided regulator is suitable for Tegra
+	  chip to control Step-Down DC-DC and LDOs.
+
+config REGULATOR_MAX8925
+	tristate "Maxim MAX8925 Power Management IC"
+	depends on MFD_MAX8925
+	help
+	  Say y here to support the voltage regulator of Maxim MAX8925 PMIC.
+
+config REGULATOR_MAX8952
+	tristate "Maxim MAX8952 Power Management IC"
+	depends on I2C
+	help
+	  This driver controls a Maxim 8952 voltage output regulator
+	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
+	  modes ranging from 0.77V to 1.40V by 0.01V steps.
+
+config REGULATOR_MAX8973
+	tristate "Maxim MAX8973A voltage regulator"
+	depends on I2C
+	depends on THERMAL && THERMAL_OF
+	select REGMAP_I2C
+	help
+	  The MAXIM MAX8973A high-efficiency. three phase, DC-DC step-down
+	  switching regulator delivers up to 9A of output current. Each
+	  phase operates at a 2MHz fixed frequency with a 120 deg shift
+	  from the adjacent phase, allowing the use of small magnetic component.
+
+config REGULATOR_MAX8997
+	tristate "Maxim 8997/8966 regulator"
+	depends on MFD_MAX8997
+	help
+	  This driver controls a Maxim 8997/8966 regulator
+	  via I2C bus. The provided regulator is suitable for S5PC110,
+	  S5PV210, and Exynos-4 chips to control VCC_CORE and
+	  VCC_USIM voltages.
+
+config REGULATOR_MAX8998
+	tristate "Maxim 8998 voltage regulator"
+	depends on MFD_MAX8998
+	help
+	  This driver controls a Maxim 8998 voltage output regulator
+	  via I2C bus. The provided regulator is suitable for S3C6410
+	  and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
+
+config REGULATOR_MAX20086
+	tristate "Maxim MAX20086-MAX20089 Camera Power Protectors"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim MAX20086-MAX20089 camera power
+	  protectorvia I2C bus. The regulator has 2 or 4 outputs depending on
+	  the device model. This driver is only capable to turn on/off them.
+
+config REGULATOR_MAX77686
+	tristate "Maxim 77686 regulator"
+	depends on MFD_MAX77686 || COMPILE_TEST
+	help
+	  This driver controls a Maxim 77686 regulator
+	  via I2C bus. The provided regulator is suitable for
+	  Exynos-4 chips to control VARM and VINT voltages.
+
+config REGULATOR_MAX77693
+	tristate "Maxim 77693/77843 regulator"
+	depends on MFD_MAX77693 || MFD_MAX77843 || COMPILE_TEST
+	help
+	  This driver controls a Maxim 77693/77843 regulators via I2C bus.
+	  The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
+	  and one current regulator 'CHARGER'. This is suitable for
+	  Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips.
+
+config REGULATOR_MAX77802
+	tristate "Maxim 77802 regulator"
+	depends on MFD_MAX77686 || COMPILE_TEST
+	help
+	  This driver controls a Maxim 77802 regulator
+	  via I2C bus. The provided regulator is suitable for
+	  Exynos5420/Exynos5800 SoCs to control various voltages.
+	  It includes support for control of voltage and ramp speed.
+
+config REGULATOR_MAX77826
+	tristate "Maxim 77826 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver controls a Maxim 77826 regulator via I2C bus.
+	  The regulator include 15 LDOs, BUCK and BUCK BOOST regulator.
+	  It includes support for control of output voltage. This
+	  regulator is found on the Samsung Galaxy S5 (klte) smartphone.
+
+config REGULATOR_MC13XXX_CORE
+	tristate
+
+config REGULATOR_MC13783
+	tristate "Freescale MC13783 regulator driver"
+	depends on MFD_MC13XXX
+	select REGULATOR_MC13XXX_CORE
+	help
+	  Say y here to support the regulators found on the Freescale MC13783
+	  PMIC.
+
+config REGULATOR_MC13892
+	tristate "Freescale MC13892 regulator driver"
+	depends on MFD_MC13XXX
+	select REGULATOR_MC13XXX_CORE
+	help
+	  Say y here to support the regulators found on the Freescale MC13892
+	  PMIC.
+
+config REGULATOR_MCP16502
+	tristate "Microchip MCP16502 PMIC"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support the MCP16502 PMIC. This driver supports
+	  basic operations (get/set voltage, get/set operating mode)
+	  through the regulator interface. In addition it enables
+	  suspend-to-ram/standby transition.
+
+config REGULATOR_MP5416
+	tristate "Monolithic MP5416 PMIC"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support the MP5416 PMIC. This will enable supports
+	  the software controllable 4 buck and 4 LDO regulators.
+	  Say M here if you want to include support for the regulator as a
+	  module.
+
+config REGULATOR_MP8859
+	tristate "MPS MP8859 regulator driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the MP8859 voltage regulator. This driver
+	  supports basic operations (get/set voltage) through the regulator
+	  interface.
+	  Say M here if you want to include support for the regulator as a
+	  module. The module will be named "mp8859".
+
+config REGULATOR_MP886X
+	tristate "MPS MP8869 regulator driver"
+	depends on I2C && (OF || COMPILE_TEST)
+	select REGMAP_I2C
+	help
+	  This driver supports the MP8869 voltage regulator.
+
+config REGULATOR_MPQ7920
+	tristate "Monolithic MPQ7920 PMIC"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support the MPQ7920 PMIC. This will enable supports
+	  the software controllable 4 buck and 5 LDO regulators.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
+config REGULATOR_MT6311
+	tristate "MediaTek MT6311 PMIC"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6311 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
+config REGULATOR_MT6315
+	tristate "MediaTek MT6315 PMIC"
+	depends on SPMI
+	select REGMAP_SPMI
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6315 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
+config REGULATOR_MT6323
+	tristate "MediaTek MT6323 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6323 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
+config REGULATOR_MT6331
+	tristate "MediaTek MT6331 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6331 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface
+
+config REGULATOR_MT6332
+	tristate "MediaTek MT6332 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6332 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface
+
+config REGULATOR_MT6358
+	tristate "MediaTek MT6358 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6358 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
+config REGULATOR_MT6359
+	tristate "MediaTek MT6359 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6359 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
+config REGULATOR_MT6360
+	tristate "MT6360 SubPMIC Regulator"
+	depends on MFD_MT6360
+	help
+	  Say Y here to enable MT6360 regulator support.
+	  This is support MT6360 PMIC/LDO part include
+	  2-channel buck with Thermal Shutdown and Overload Protection
+	  6-channel High PSRR and Low Dropout LDO.
+
+config REGULATOR_MT6370
+	tristate "MT6370 SubPMIC Regulator"
+	depends on MFD_MT6370
+	help
+	  Say Y here to enable MT6370 regulator support.
+	  This driver supports the control for DisplayBias voltages and one
+	  general purpose LDO which is commonly used to drive the vibrator.
+
+config REGULATOR_MT6380
+	tristate "MediaTek MT6380 PMIC"
+	depends on MTK_PMIC_WRAP
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6380 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
+config REGULATOR_MT6397
+	tristate "MediaTek MT6397 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6397 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
+config REGULATOR_MTK_DVFSRC
+	tristate "MediaTek DVFSRC regulator driver"
+	depends on MTK_DVFSRC
+	help
+	  Say y here to control regulator by DVFSRC (dynamic voltage
+	  and frequency scaling resource collector).
+	  This driver supports to control regulators via the DVFSRC
+	  of Mediatek. It allows for voting on regulator state
+	  between multiple users.
+
+config REGULATOR_PALMAS
+	tristate "TI Palmas PMIC Regulators"
+	depends on MFD_PALMAS
+	help
+	  If you wish to control the regulators on the Palmas series of
+	  chips say Y here. This will enable support for all the software
+	  controllable SMPS/LDO regulators.
+
+	  The regulators available on Palmas series chips vary depending
+	  on the muxing. This is handled automatically in the driver by
+	  reading the mux info from OTP.
+
+config REGULATOR_PBIAS
+	tristate "PBIAS OMAP regulator driver"
+	depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
+	help
+	 Say y here to support pbias regulator for mmc1:SD card i/o
+	 on OMAP SoCs.
+	 This driver provides support for OMAP pbias modelled
+	 regulators.
+
+config REGULATOR_PCA9450
+	tristate "NXP PCA9450A/PCA9450B/PCA9450C regulator driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the NXP PCA9450A/PCA9450B/PCA9450C PMIC
+	  regulator driver.
+
+config REGULATOR_PCAP
+	tristate "Motorola PCAP2 regulator driver"
+	depends on EZX_PCAP
+	help
+	 This driver provides support for the voltage regulators of the
+	 PCAP2 PMIC.
+
+config REGULATOR_PCF50633
+	tristate "NXP PCF50633 regulator driver"
+	depends on MFD_PCF50633
+	help
+	 Say Y here to support the voltage regulators and converters
+	 on PCF50633
+
+config REGULATOR_PF8X00
+	tristate "NXP PF8100/PF8121A/PF8200 regulator driver"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support the regulators found on the NXP
+	  PF8100/PF8121A/PF8200 PMIC.
+
+	  Say M here if you want to support for the regulators found
+	  on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
+	  "pf8x00-regulator".
+
+config REGULATOR_PFUZE100
+	tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support the regulators found on the Freescale
+	  PFUZE100/200/3000/3001 PMIC.
+
+config REGULATOR_PV88060
+	tristate "Powerventure Semiconductor PV88060 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the voltage regulators and convertors
+	  PV88060
+
+config REGULATOR_PV88080
+	tristate "Powerventure Semiconductor PV88080 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the buck convertors on PV88080
+
+config REGULATOR_PV88090
+	tristate "Powerventure Semiconductor PV88090 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the voltage regulators and convertors
+	  on PV88090
+
+config REGULATOR_PWM
+	tristate "PWM voltage regulator"
+	depends on PWM
+	help
+	  This driver supports PWM controlled voltage regulators. PWM
+	  duty cycle can increase or decrease the voltage.
+
+config REGULATOR_QCOM_RPM
+	tristate "Qualcomm RPM regulator driver"
+	depends on MFD_QCOM_RPM
+	help
+	  If you say yes to this option, support will be included for the
+	  regulators exposed by the Resource Power Manager found in Qualcomm
+	  8660, 8960 and 8064 based devices.
+
+	  Say M here if you want to include support for the regulators on the
+	  Qualcomm RPM as a module. The module will be named
+	  "qcom_rpm-regulator".
+
+config REGULATOR_QCOM_RPMH
+	tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
+	depends on QCOM_RPMH || (QCOM_RPMH=n && COMPILE_TEST)
+	depends on QCOM_COMMAND_DB || (QCOM_COMMAND_DB=n && COMPILE_TEST)
+	help
+	  This driver supports control of PMIC regulators via the RPMh hardware
+	  block found on Qualcomm Technologies Inc. SoCs.  RPMh regulator
+	  control allows for voting on regulator state between multiple
+	  processors within the SoC.
+
+config REGULATOR_QCOM_SMD_RPM
+	tristate "Qualcomm SMD based RPM regulator driver"
+	depends on QCOM_SMD_RPM
+	help
+	  If you say yes to this option, support will be included for the
+	  regulators exposed by the Resource Power Manager found in Qualcomm
+	  8974 based devices.
+
+	  Say M here if you want to include support for the regulators on the
+	  Qualcomm RPM as a module. The module will be named
+	  "qcom_smd-regulator".
+
+config REGULATOR_QCOM_SPMI
+	tristate "Qualcomm SPMI regulator driver"
+	depends on SPMI || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  regulators found in Qualcomm SPMI PMICs.
+
+	  Say M here if you want to include support for the regulators on the
+	  Qualcomm SPMI PMICs as a module. The module will be named
+	  "qcom_spmi-regulator".
+
+config REGULATOR_QCOM_USB_VBUS
+	tristate "Qualcomm USB Vbus regulator driver"
+	depends on SPMI || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  regulator used to enable the VBUS output.
+
+	  Say M here if you want to include support for enabling the VBUS output
+	  as a module. The module will be named "qcom_usb_vbus_regulator".
+
+config REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY
+	tristate "Raspberry Pi 7-inch touchscreen panel ATTINY regulator"
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on I2C
+	depends on OF_GPIO
+	select REGMAP_I2C
+	help
+	  This driver supports ATTINY regulator on the Raspberry Pi 7-inch
+	  touchscreen unit. The regulator is used to enable power to the
+	  TC358762, display and to control backlight.
+
+config REGULATOR_RC5T583
+	tristate "RICOH RC5T583 Power regulators"
+	depends on MFD_RC5T583
+	help
+	  Select this option to enable the power regulator of RICOH
+	  PMIC RC5T583.
+	  This driver supports the control of different power rails of device
+	  through regulator interface. The device supports multiple DCDC/LDO
+	  outputs which can be controlled by i2c communication.
+
+config REGULATOR_RK808
+	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 Power regulators"
+	depends on MFD_RK808
+	help
+	  Select this option to enable the power regulator of ROCKCHIP
+	  PMIC RK805,RK809&RK817,RK808 and RK818.
+	  This driver supports the control of different power rails of device
+	  through regulator interface. The device supports multiple DCDC/LDO
+	  outputs which can be controlled by i2c communication.
+
+config REGULATOR_RN5T618
+	tristate "Ricoh RN5T567/618 voltage regulators"
+	depends on MFD_RN5T618
+	help
+	  Say y here to support the regulators found on Ricoh RN5T567,
+	  RN5T618 or RC5T619 PMIC.
+
+config REGULATOR_ROHM
+	tristate
+
+config REGULATOR_RT4801
+	tristate "Richtek RT4801 Regulators"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
+	  The device supports two regulators (DSVP/DSVN).
+
+config REGULATOR_RT4831
+	tristate "Richtek RT4831 DSV Regulators"
+	depends on MFD_RT4831
+	help
+	  This adds support for voltage regulators in Richtek RT4831.
+	  There are three regulators (VLCM/DSVP/DSVN).
+	  VLCM is a virtual voltage input for DSVP/DSVN inside IC.
+	  And DSVP/DSVN is the real Vout range from 4V to 6.5V.
+	  It's common used to provide the power for the display panel.
+
+config REGULATOR_RT5033
+	tristate "Richtek RT5033 Regulators"
+	depends on MFD_RT5033
+	help
+	  This adds support for voltage and current regulators in Richtek
+	  RT5033 PMIC. The device supports multiple regulators like
+	  current source, LDO and Buck.
+
+config REGULATOR_RT5120
+	tristate "Richtek RT5120 PMIC Regulators"
+	depends on MFD_RT5120
+	help
+	  This adds support for voltage regulator in Richtek RT5120 PMIC.
+	  It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN
+	  to control external power source. Only BUCK1 is adjustable from
+	  600mV to 1395mV, per step 6.250mV. The others are all fixed voltage
+	  by external hardware circuit.
+
+config REGULATOR_RT5190A
+	tristate "Richtek RT5190A PMIC"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This adds support for voltage regulator in Richtek RT5190A PMIC.
+	  It integratas 1 channel buck controller, 3 channels high efficiency
+	  buck converters, 1 LDO, mute AC OFF depop function, with the general
+	  I2C control interface.
+
+config REGULATOR_RT5759
+	tristate "Richtek RT5759 Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This adds support for voltage regulator in Richtek RT5759.
+	  The RT5759 is a high-performance, synchronous step-down DC-DC
+	  converter that can deliver up to 9A output current from 3V to 6.5V
+	  input supply.
+
+config REGULATOR_RT6160
+	tristate "Richtek RT6160 BuckBoost voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This adds support for voltage regulator in Richtek RT6160.
+	  This device automatically change voltage output mode from
+	  Buck or Boost. The mode transition depend on the input source voltage.
+	  The wide output range is from 2025mV to 5200mV and can be used on most
+	  common application scenario.
+
+config REGULATOR_RT6245
+	tristate "Richtek RT6245 voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This adds support for Richtek RT6245 voltage regulator.
+	  It can support up to 14A output current and adjustable output voltage
+	  from 0.4375V to 1.3875V, per step 12.5mV.
+
+config REGULATOR_RTQ2134
+	tristate "Richtek RTQ2134 SubPMIC Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver adds support for RTQ2134 SubPMIC regulators.
+	  The RTQ2134 is a multi-phase, programmable power management IC that
+	  integrate with four high efficient, synchronous step-down converter
+	  cores. It features wide output voltage range and the capability to
+	  configure the corresponding power stages.
+
+config REGULATOR_RTMV20
+	tristate "Richtek RTMV20 Laser Diode Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver adds support for the load switch current regulator on
+	  the Richtek RTMV20. It can support the load current up to 6A and
+	  integrate strobe/vsync/fsin signal to synchronize the IR camera.
+
+config REGULATOR_RTQ6752
+	tristate "Richtek RTQ6752 TFT LCD voltage regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver adds support for Richtek RTQ6752. RTQ6752 includes two
+	  synchronous boost converters for PAVDD, and one synchronous NAVDD
+	  buck-boost. This device is suitable for automotive TFT-LCD panel.
+
+config REGULATOR_S2MPA01
+	tristate "Samsung S2MPA01 voltage regulator"
+	depends on MFD_SEC_CORE || COMPILE_TEST
+	help
+	 This driver controls Samsung S2MPA01 voltage output regulator
+	 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
+
+config REGULATOR_S2MPS11
+	tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator"
+	depends on MFD_SEC_CORE || COMPILE_TEST
+	help
+	 This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage
+	 output regulator via I2C bus. The chip is comprised of high efficient
+	 Buck converters including Dual-Phase Buck converter, Buck-Boost
+	 converter, various LDOs.
+
+config REGULATOR_S5M8767
+	tristate "Samsung S5M8767A voltage regulator"
+	depends on MFD_SEC_CORE || COMPILE_TEST
+	help
+	 This driver supports a Samsung S5M8767A voltage output regulator
+	 via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
+	 supports DVS mode with 8bits of output voltage control.
+
+config REGULATOR_SC2731
+	tristate "Spreadtrum SC2731 power regulator driver"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	help
+	  This driver provides support for the voltage regulators on the
+	  SC2731 PMIC.
+
+config REGULATOR_SKY81452
+	tristate "Skyworks Solutions SKY81452 voltage regulator"
+	depends on MFD_SKY81452
+	help
+	  This driver supports Skyworks SKY81452 voltage output regulator
+	  via I2C bus. SKY81452 has one voltage linear regulator can be
+	  programmed from 4.5V to 20V.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called sky81452-regulator.
+
+config REGULATOR_SLG51000
+	tristate "Dialog Semiconductor SLG51000 regulators"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support for the Dialog Semiconductor SLG51000.
+	  The SLG51000 is seven compact and customizable low dropout
+	  regulators.
+
+config REGULATOR_SM5703
+	tristate "Silicon Mitus SM5703 regulators"
+	depends on MFD_SM5703
+	help
+	  This driver provides support for voltage regulators of SM5703
+	  multi-function device.
+
+config REGULATOR_STM32_BOOSTER
+	tristate "STMicroelectronics STM32 BOOSTER"
+	depends on ARCH_STM32 || COMPILE_TEST
+	help
+	  This driver supports internal booster (3V3) embedded in some
+	  STMicroelectronics STM32 chips. It can be used to supply ADC analog
+	  input switches when vdda supply is below 2.7V.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called stm32-booster.
+
+config REGULATOR_STM32_VREFBUF
+	tristate "STMicroelectronics STM32 VREFBUF"
+	depends on ARCH_STM32 || COMPILE_TEST
+	help
+	  This driver supports STMicroelectronics STM32 VREFBUF (voltage
+	  reference buffer) which can be used as voltage reference for
+	  internal ADCs, DACs and also for external components through
+	  dedicated Vref+ pin.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called stm32-vrefbuf.
+
+config REGULATOR_STM32_PWR
+	bool "STMicroelectronics STM32 PWR"
+	depends on ARCH_STM32 || COMPILE_TEST
+	help
+	  This driver supports internal regulators (1V1, 1V8, 3V3) in the
+	  STMicroelectronics STM32 chips.
+
+config REGULATOR_STPMIC1
+	tristate "STMicroelectronics STPMIC1 PMIC Regulators"
+	depends on MFD_STPMIC1
+	help
+	  This driver supports STMicroelectronics STPMIC1 PMIC voltage
+	  regulators and switches. The STPMIC1 regulators supply power to
+	  an application processor as well as to external system
+	  peripherals such as DDR, Flash memories and system devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stpmic1_regulator.
+
+config REGULATOR_TI_ABB
+	tristate "TI Adaptive Body Bias on-chip LDO"
+	depends on ARCH_OMAP || COMPILE_TEST
+	help
+	  Select this option to support Texas Instruments' on-chip Adaptive Body
+	  Bias (ABB) LDO regulators. It is recommended that this option be
+	  enabled on required TI SoC. Certain Operating Performance Points
+	  on TI SoCs may be unstable without enabling this as it provides
+	  device specific optimized bias to allow/optimize functionality.
+
+config REGULATOR_STW481X_VMMC
+	bool "ST Microelectronics STW481X VMMC regulator"
+	depends on MFD_STW481X || COMPILE_TEST
+	default y if MFD_STW481X
+	help
+	  This driver supports the internal VMMC regulator in the STw481x
+	  PMIC chips.
+
+config REGULATOR_SY7636A
+	tristate "Silergy SY7636A voltage regulator"
+	depends on MFD_SY7636A
+	help
+	  This driver supports Silergy SY3686A voltage regulator.
+
+config REGULATOR_SY8106A
+	tristate "Silergy SY8106A regulator"
+	depends on I2C && (OF || COMPILE_TEST)
+	select REGMAP_I2C
+	help
+	  This driver supports SY8106A single output regulator.
+
+config REGULATOR_SY8824X
+	tristate "Silergy SY8824C/SY8824E regulator"
+	depends on I2C && (OF || COMPILE_TEST)
+	select REGMAP_I2C
+	help
+	  This driver supports SY8824C single output regulator.
+
+config REGULATOR_SY8827N
+	tristate "Silergy SY8827N regulator"
+	depends on I2C && (OF || COMPILE_TEST)
+	select REGMAP_I2C
+	help
+	  This driver supports SY8827N single output regulator.
+
+config REGULATOR_TPS51632
+	tristate "TI TPS51632 Power Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports TPS51632 voltage regulator chip.
+	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
+	  with Serial VID control and DVFS.
+	  The voltage output can be configure through I2C interface or PWM
+	  interface.
+
+config REGULATOR_TPS6105X
+	tristate "TI TPS6105X Power regulators"
+	depends on TPS6105X
+	default y if TPS6105X
+	help
+	  This driver supports TPS61050/TPS61052 voltage regulator chips.
+	  It is a single boost converter primarily for white LEDs and
+	  audio amplifiers.
+
+config REGULATOR_TPS62360
+	tristate "TI TPS6236x Power Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports TPS6236x voltage regulator chip. This
+	  regulator is meant for processor core supply. This chip is
+	  high-frequency synchronous step down dc-dc converter optimized
+	  for battery-powered portable applications.
+
+config REGULATOR_TPS6286X
+	tristate "TI TPS6286x Power Regulator"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  This driver supports TPS6236x voltage regulator chips. These are
+	  high-frequency synchronous step-down converters with an I2C
+	  interface.
+
+config REGULATOR_TPS65023
+	tristate "TI TPS65023 Power regulators"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports TPS65023 voltage regulator chips. TPS65023 provides
+	  three step-down converters and two general-purpose LDO voltage regulators.
+	  It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_TPS6507X
+	tristate "TI TPS6507X Power regulators"
+	depends on I2C
+	help
+	  This driver supports TPS6507X voltage regulator chips. TPS6507X provides
+	  three step-down converters and two general-purpose LDO voltage regulators.
+	  It supports TI's software based Class-2 SmartReflex implementation.
+
+config REGULATOR_TPS65086
+	tristate "TI TPS65086 Power regulators"
+	depends on MFD_TPS65086
+	help
+	  This driver provides support for the voltage regulators on
+	  TI TPS65086 PMICs.
+
+config REGULATOR_TPS65090
+	tristate "TI TPS65090 Power regulator"
+	depends on MFD_TPS65090
+	help
+	  This driver provides support for the voltage regulators on the
+	  TI TPS65090 PMIC.
+
+config REGULATOR_TPS65132
+	tristate "TI TPS65132 Dual Output Power regulators"
+	depends on I2C && GPIOLIB
+	select REGMAP_I2C
+	help
+	  This driver supports TPS65132 single inductor - dual output
+	  power supply specifically designed for display panels.
+
+config REGULATOR_TPS65217
+	tristate "TI TPS65217 Power regulators"
+	depends on MFD_TPS65217
+	help
+	  This driver supports TPS65217 voltage regulator chips. TPS65217
+	  provides three step-down converters and four general-purpose LDO
+	  voltage regulators. It supports software based voltage control
+	  for different voltage domains
+
+config REGULATOR_TPS65218
+	tristate "TI TPS65218 Power regulators"
+	depends on MFD_TPS65218 && OF
+	help
+	  This driver supports TPS65218 voltage regulator chips. TPS65218
+	  provides six step-down converters and one general-purpose LDO
+	  voltage regulators. It supports software based voltage control
+	  for different voltage domains
+
+config REGULATOR_TPS65219
+	tristate "TI TPS65219 Power regulators"
+	depends on MFD_TPS65219 && OF
+	help
+	  This driver supports TPS65219 voltage regulator chips.
+	  TPS65219 series of PMICs have 3 single phase BUCKs & 4 LDOs
+	  voltage regulators. It supports software based voltage control
+	  for different voltage domains.
+
+config REGULATOR_TPS6524X
+	tristate "TI TPS6524X Power regulators"
+	depends on SPI
+	help
+	  This driver supports TPS6524X voltage regulator chips. TPS6524X
+	  provides three step-down converters and two general-purpose LDO
+	  voltage regulators.  This device is interfaced using a customized
+	  serial interface currently supported on the sequencer serial
+	  port controller.
+
+config REGULATOR_TPS6586X
+	tristate "TI TPS6586X Power regulators"
+	depends on MFD_TPS6586X
+	help
+	  This driver supports TPS6586X voltage regulator chips.
+
+config REGULATOR_TPS65910
+	tristate "TI TPS65910/TPS65911 Power Regulators"
+	depends on MFD_TPS65910
+	help
+	  This driver supports TPS65910/TPS65911 voltage regulator chips.
+
+config REGULATOR_TPS65912
+	tristate "TI TPS65912 Power regulator"
+	depends on MFD_TPS65912
+	help
+	    This driver supports TPS65912 voltage regulator chip.
+
+config REGULATOR_TPS68470
+	tristate "TI TPS68470 PMIC Regulators Driver"
+	depends on INTEL_SKL_INT3472 || COMPILE_TEST
+	help
+	  This driver adds support for the TPS68470 PMIC to register
+	  regulators against the usual framework.
+
+	  The module will be called "tps68470-regulator".
+
+config REGULATOR_TWL4030
+	tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
+	depends on TWL4030_CORE
+	help
+	  This driver supports the voltage regulators provided by
+	  this family of companion chips.
+
+config REGULATOR_UNIPHIER
+	tristate "UniPhier regulator driver"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on OF
+	select REGMAP_MMIO
+	default ARCH_UNIPHIER
+	help
+	  Support for regulators implemented on Socionext UniPhier SoCs.
+
+config REGULATOR_VCTRL
+	tristate "Voltage controlled regulators"
+	depends on OF
+	help
+	  This driver provides support for voltage regulators whose output
+	  voltage is controlled by the voltage of another regulator.
+
+config REGULATOR_VEXPRESS
+	tristate "Versatile Express regulators"
+	depends on VEXPRESS_CONFIG
+	help
+	  This driver provides support for voltage regulators available
+	  on the ARM Ltd's Versatile Express platform.
+
+config REGULATOR_VQMMC_IPQ4019
+	tristate "IPQ4019 VQMMC SD LDO regulator support"
+	depends on ARCH_QCOM
+	help
+	  This driver provides support for the VQMMC LDO I/0
+	  voltage regulator of the IPQ4019 SD/EMMC controller.
+
+config REGULATOR_WM831X
+	tristate "Wolfson Microelectronics WM831x PMIC regulators"
+	depends on MFD_WM831X
+	help
+	  Support the voltage and current regulators of the WM831x series
+	  of PMIC devices.
+
+config REGULATOR_WM8350
+	tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
+	depends on MFD_WM8350
+	help
+	  This driver provides support for the voltage and current regulators
+	  of the WM8350 AudioPlus PMIC.
+
+config REGULATOR_WM8400
+	tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
+	depends on MFD_WM8400
+	help
+	  This driver provides support for the voltage regulators of the
+	  WM8400 AudioPlus PMIC.
+
+config REGULATOR_WM8994
+	tristate "Wolfson Microelectronics WM8994 CODEC"
+	depends on MFD_WM8994
+	help
+	  This driver provides support for the voltage regulators on the
+	  WM8994 CODEC.
+
+config REGULATOR_QCOM_LABIBB
+	tristate "QCOM LAB/IBB regulator support"
+	depends on SPMI || COMPILE_TEST
+	help
+	  This driver supports Qualcomm's LAB/IBB regulators present on the
+	  Qualcomm's PMIC chip pmi8998. QCOM LAB and IBB are SPMI
+	  based PMIC implementations. LAB can be used as positive
+	  boost regulator and IBB can be used as a negative boost regulator
+	  for LCD display panel.
+
+endif