Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 352 insertions, 0 deletions

diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
new file mode 100644
index 000000000..f9856d4e2
--- /dev/null
+++ b/drivers/regulator/anatop-regulator.c
@@ -0,0 +1,352 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
+
+#define LDO_RAMP_UP_UNIT_IN_CYCLES      64 /* 64 cycles per step */
+#define LDO_RAMP_UP_FREQ_IN_MHZ         24 /* cycle based on 24M OSC */
+
+#define LDO_POWER_GATE			0x00
+#define LDO_FET_FULL_ON			0x1f
+
+struct anatop_regulator {
+	u32 delay_reg;
+	int delay_bit_shift;
+	int delay_bit_width;
+	struct regulator_desc rdesc;
+	bool bypass;
+	int sel;
+};
+
+static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg,
+	unsigned int old_sel,
+	unsigned int new_sel)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	u32 val;
+	int ret = 0;
+
+	/* check whether need to care about LDO ramp up speed */
+	if (anatop_reg->delay_bit_width && new_sel > old_sel) {
+		/*
+		 * the delay for LDO ramp up time is
+		 * based on the register setting, we need
+		 * to calculate how many steps LDO need to
+		 * ramp up, and how much delay needed. (us)
+		 */
+		regmap_read(reg->regmap, anatop_reg->delay_reg, &val);
+		val = (val >> anatop_reg->delay_bit_shift) &
+			((1 << anatop_reg->delay_bit_width) - 1);
+		ret = (new_sel - old_sel) * (LDO_RAMP_UP_UNIT_IN_CYCLES <<
+			val) / LDO_RAMP_UP_FREQ_IN_MHZ + 1;
+	}
+
+	return ret;
+}
+
+static int anatop_regmap_enable(struct regulator_dev *reg)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	int sel;
+
+	sel = anatop_reg->bypass ? LDO_FET_FULL_ON : anatop_reg->sel;
+	return regulator_set_voltage_sel_regmap(reg, sel);
+}
+
+static int anatop_regmap_disable(struct regulator_dev *reg)
+{
+	return regulator_set_voltage_sel_regmap(reg, LDO_POWER_GATE);
+}
+
+static int anatop_regmap_is_enabled(struct regulator_dev *reg)
+{
+	return regulator_get_voltage_sel_regmap(reg) != LDO_POWER_GATE;
+}
+
+static int anatop_regmap_core_set_voltage_sel(struct regulator_dev *reg,
+					      unsigned selector)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	int ret;
+
+	if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg)) {
+		anatop_reg->sel = selector;
+		return 0;
+	}
+
+	ret = regulator_set_voltage_sel_regmap(reg, selector);
+	if (!ret)
+		anatop_reg->sel = selector;
+	return ret;
+}
+
+static int anatop_regmap_core_get_voltage_sel(struct regulator_dev *reg)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+
+	if (anatop_reg->bypass || !anatop_regmap_is_enabled(reg))
+		return anatop_reg->sel;
+
+	return regulator_get_voltage_sel_regmap(reg);
+}
+
+static int anatop_regmap_get_bypass(struct regulator_dev *reg, bool *enable)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	int sel;
+
+	sel = regulator_get_voltage_sel_regmap(reg);
+	if (sel == LDO_FET_FULL_ON)
+		WARN_ON(!anatop_reg->bypass);
+	else if (sel != LDO_POWER_GATE)
+		WARN_ON(anatop_reg->bypass);
+
+	*enable = anatop_reg->bypass;
+	return 0;
+}
+
+static int anatop_regmap_set_bypass(struct regulator_dev *reg, bool enable)
+{
+	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
+	int sel;
+
+	if (enable == anatop_reg->bypass)
+		return 0;
+
+	sel = enable ? LDO_FET_FULL_ON : anatop_reg->sel;
+	anatop_reg->bypass = enable;
+
+	return regulator_set_voltage_sel_regmap(reg, sel);
+}
+
+static struct regulator_ops anatop_rops = {
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+};
+
+static const struct regulator_ops anatop_core_rops = {
+	.enable = anatop_regmap_enable,
+	.disable = anatop_regmap_disable,
+	.is_enabled = anatop_regmap_is_enabled,
+	.set_voltage_sel = anatop_regmap_core_set_voltage_sel,
+	.set_voltage_time_sel = anatop_regmap_set_voltage_time_sel,
+	.get_voltage_sel = anatop_regmap_core_get_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.get_bypass = anatop_regmap_get_bypass,
+	.set_bypass = anatop_regmap_set_bypass,
+};
+
+static int anatop_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *anatop_np;
+	struct regulator_desc *rdesc;
+	struct regulator_dev *rdev;
+	struct anatop_regulator *sreg;
+	struct regulator_init_data *initdata;
+	struct regulator_config config = { };
+	struct regmap *regmap;
+	u32 control_reg;
+	u32 vol_bit_shift;
+	u32 vol_bit_width;
+	u32 min_bit_val;
+	u32 min_voltage;
+	u32 max_voltage;
+	int ret = 0;
+	u32 val;
+
+	sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
+	if (!sreg)
+		return -ENOMEM;
+
+	rdesc = &sreg->rdesc;
+	rdesc->type = REGULATOR_VOLTAGE;
+	rdesc->owner = THIS_MODULE;
+
+	of_property_read_string(np, "regulator-name", &rdesc->name);
+	if (!rdesc->name) {
+		dev_err(dev, "failed to get a regulator-name\n");
+		return -EINVAL;
+	}
+
+	initdata = of_get_regulator_init_data(dev, np, rdesc);
+	if (!initdata)
+		return -ENOMEM;
+
+	initdata->supply_regulator = "vin";
+
+	anatop_np = of_get_parent(np);
+	if (!anatop_np)
+		return -ENODEV;
+	regmap = syscon_node_to_regmap(anatop_np);
+	of_node_put(anatop_np);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ret = of_property_read_u32(np, "anatop-reg-offset", &control_reg);
+	if (ret) {
+		dev_err(dev, "no anatop-reg-offset property set\n");
+		return ret;
+	}
+	ret = of_property_read_u32(np, "anatop-vol-bit-width", &vol_bit_width);
+	if (ret) {
+		dev_err(dev, "no anatop-vol-bit-width property set\n");
+		return ret;
+	}
+	ret = of_property_read_u32(np, "anatop-vol-bit-shift", &vol_bit_shift);
+	if (ret) {
+		dev_err(dev, "no anatop-vol-bit-shift property set\n");
+		return ret;
+	}
+	ret = of_property_read_u32(np, "anatop-min-bit-val", &min_bit_val);
+	if (ret) {
+		dev_err(dev, "no anatop-min-bit-val property set\n");
+		return ret;
+	}
+	ret = of_property_read_u32(np, "anatop-min-voltage", &min_voltage);
+	if (ret) {
+		dev_err(dev, "no anatop-min-voltage property set\n");
+		return ret;
+	}
+	ret = of_property_read_u32(np, "anatop-max-voltage", &max_voltage);
+	if (ret) {
+		dev_err(dev, "no anatop-max-voltage property set\n");
+		return ret;
+	}
+
+	/* read LDO ramp up setting, only for core reg */
+	of_property_read_u32(np, "anatop-delay-reg-offset",
+			     &sreg->delay_reg);
+	of_property_read_u32(np, "anatop-delay-bit-width",
+			     &sreg->delay_bit_width);
+	of_property_read_u32(np, "anatop-delay-bit-shift",
+			     &sreg->delay_bit_shift);
+
+	rdesc->n_voltages = (max_voltage - min_voltage) / 25000 + 1
+			    + min_bit_val;
+	rdesc->min_uV = min_voltage;
+	rdesc->uV_step = 25000;
+	rdesc->linear_min_sel = min_bit_val;
+	rdesc->vsel_reg = control_reg;
+	rdesc->vsel_mask = ((1 << vol_bit_width) - 1) << vol_bit_shift;
+	rdesc->min_dropout_uV = 125000;
+
+	config.dev = &pdev->dev;
+	config.init_data = initdata;
+	config.driver_data = sreg;
+	config.of_node = pdev->dev.of_node;
+	config.regmap = regmap;
+
+	/* Only core regulators have the ramp up delay configuration. */
+	if (control_reg && sreg->delay_bit_width) {
+		rdesc->ops = &anatop_core_rops;
+
+		ret = regmap_read(config.regmap, rdesc->vsel_reg, &val);
+		if (ret) {
+			dev_err(dev, "failed to read initial state\n");
+			return ret;
+		}
+
+		sreg->sel = (val & rdesc->vsel_mask) >> vol_bit_shift;
+		if (sreg->sel == LDO_FET_FULL_ON) {
+			sreg->sel = 0;
+			sreg->bypass = true;
+		}
+
+		/*
+		 * In case vddpu was disabled by the bootloader, we need to set
+		 * a sane default until imx6-cpufreq was probed and changes the
+		 * voltage to the correct value. In this case we set 1.25V.
+		 */
+		if (!sreg->sel && !strcmp(rdesc->name, "vddpu"))
+			sreg->sel = 22;
+
+		/* set the default voltage of the pcie phy to be 1.100v */
+		if (!sreg->sel && !strcmp(rdesc->name, "vddpcie"))
+			sreg->sel = 0x10;
+
+		if (!sreg->bypass && !sreg->sel) {
+			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
+			return -EINVAL;
+		}
+	} else {
+		u32 enable_bit;
+
+		rdesc->ops = &anatop_rops;
+
+		if (!of_property_read_u32(np, "anatop-enable-bit",
+					  &enable_bit)) {
+			anatop_rops.enable  = regulator_enable_regmap;
+			anatop_rops.disable = regulator_disable_regmap;
+			anatop_rops.is_enabled = regulator_is_enabled_regmap;
+
+			rdesc->enable_reg = control_reg;
+			rdesc->enable_mask = BIT(enable_bit);
+		}
+	}
+
+	/* register regulator */
+	rdev = devm_regulator_register(dev, rdesc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		if (ret == -EPROBE_DEFER)
+			dev_dbg(dev, "failed to register %s, deferring...\n",
+				rdesc->name);
+		else
+			dev_err(dev, "failed to register %s\n", rdesc->name);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, rdev);
+
+	return 0;
+}
+
+static const struct of_device_id of_anatop_regulator_match_tbl[] = {
+	{ .compatible = "fsl,anatop-regulator", },
+	{ /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_anatop_regulator_match_tbl);
+
+static struct platform_driver anatop_regulator_driver = {
+	.driver = {
+		.name	= "anatop_regulator",
+		.of_match_table = of_anatop_regulator_match_tbl,
+	},
+	.probe	= anatop_regulator_probe,
+};
+
+static int __init anatop_regulator_init(void)
+{
+	return platform_driver_register(&anatop_regulator_driver);
+}
+postcore_initcall(anatop_regulator_init);
+
+static void __exit anatop_regulator_exit(void)
+{
+	platform_driver_unregister(&anatop_regulator_driver);
+}
+module_exit(anatop_regulator_exit);
+
+MODULE_AUTHOR("Nancy Chen <Nancy.Chen@freescale.com>");
+MODULE_AUTHOR("Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>");
+MODULE_DESCRIPTION("ANATOP Regulator driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:anatop_regulator");