Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 884 insertions, 0 deletions

diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
new file mode 100644
index 000000000..7038f47d7
--- /dev/null
+++ b/drivers/rtc/rtc-sun6i.c
@@ -0,0 +1,884 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * An RTC driver for Allwinner A31/A23
+ *
+ * Copyright (c) 2014, Chen-Yu Tsai <wens@csie.org>
+ *
+ * based on rtc-sunxi.c
+ *
+ * An RTC driver for Allwinner A10/A20
+ *
+ * Copyright (c) 2013, Carlo Caione <carlo.caione@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clk/sunxi-ng.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* Control register */
+#define SUN6I_LOSC_CTRL				0x0000
+#define SUN6I_LOSC_CTRL_KEY			(0x16aa << 16)
+#define SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS		BIT(15)
+#define SUN6I_LOSC_CTRL_ALM_DHMS_ACC		BIT(9)
+#define SUN6I_LOSC_CTRL_RTC_HMS_ACC		BIT(8)
+#define SUN6I_LOSC_CTRL_RTC_YMD_ACC		BIT(7)
+#define SUN6I_LOSC_CTRL_EXT_LOSC_EN		BIT(4)
+#define SUN6I_LOSC_CTRL_EXT_OSC			BIT(0)
+#define SUN6I_LOSC_CTRL_ACC_MASK		GENMASK(9, 7)
+
+#define SUN6I_LOSC_CLK_PRESCAL			0x0008
+
+/* RTC */
+#define SUN6I_RTC_YMD				0x0010
+#define SUN6I_RTC_HMS				0x0014
+
+/* Alarm 0 (counter) */
+#define SUN6I_ALRM_COUNTER			0x0020
+/* This holds the remaining alarm seconds on older SoCs (current value) */
+#define SUN6I_ALRM_COUNTER_HMS			0x0024
+#define SUN6I_ALRM_EN				0x0028
+#define SUN6I_ALRM_EN_CNT_EN			BIT(0)
+#define SUN6I_ALRM_IRQ_EN			0x002c
+#define SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN		BIT(0)
+#define SUN6I_ALRM_IRQ_STA			0x0030
+#define SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND		BIT(0)
+
+/* Alarm 1 (wall clock) */
+#define SUN6I_ALRM1_EN				0x0044
+#define SUN6I_ALRM1_IRQ_EN			0x0048
+#define SUN6I_ALRM1_IRQ_STA			0x004c
+#define SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND	BIT(0)
+
+/* Alarm config */
+#define SUN6I_ALARM_CONFIG			0x0050
+#define SUN6I_ALARM_CONFIG_WAKEUP		BIT(0)
+
+#define SUN6I_LOSC_OUT_GATING			0x0060
+#define SUN6I_LOSC_OUT_GATING_EN_OFFSET		0
+
+/* General-purpose data */
+#define SUN6I_GP_DATA				0x0100
+#define SUN6I_GP_DATA_SIZE			0x20
+
+/*
+ * Get date values
+ */
+#define SUN6I_DATE_GET_DAY_VALUE(x)		((x)  & 0x0000001f)
+#define SUN6I_DATE_GET_MON_VALUE(x)		(((x) & 0x00000f00) >> 8)
+#define SUN6I_DATE_GET_YEAR_VALUE(x)		(((x) & 0x003f0000) >> 16)
+#define SUN6I_LEAP_GET_VALUE(x)			(((x) & 0x00400000) >> 22)
+
+/*
+ * Get time values
+ */
+#define SUN6I_TIME_GET_SEC_VALUE(x)		((x)  & 0x0000003f)
+#define SUN6I_TIME_GET_MIN_VALUE(x)		(((x) & 0x00003f00) >> 8)
+#define SUN6I_TIME_GET_HOUR_VALUE(x)		(((x) & 0x001f0000) >> 16)
+
+/*
+ * Set date values
+ */
+#define SUN6I_DATE_SET_DAY_VALUE(x)		((x)       & 0x0000001f)
+#define SUN6I_DATE_SET_MON_VALUE(x)		((x) <<  8 & 0x00000f00)
+#define SUN6I_DATE_SET_YEAR_VALUE(x)		((x) << 16 & 0x003f0000)
+#define SUN6I_LEAP_SET_VALUE(x)			((x) << 22 & 0x00400000)
+
+/*
+ * Set time values
+ */
+#define SUN6I_TIME_SET_SEC_VALUE(x)		((x)       & 0x0000003f)
+#define SUN6I_TIME_SET_MIN_VALUE(x)		((x) <<  8 & 0x00003f00)
+#define SUN6I_TIME_SET_HOUR_VALUE(x)		((x) << 16 & 0x001f0000)
+
+/*
+ * The year parameter passed to the driver is usually an offset relative to
+ * the year 1900. This macro is used to convert this offset to another one
+ * relative to the minimum year allowed by the hardware.
+ *
+ * The year range is 1970 - 2033. This range is selected to match Allwinner's
+ * driver, even though it is somewhat limited.
+ */
+#define SUN6I_YEAR_MIN				1970
+#define SUN6I_YEAR_OFF				(SUN6I_YEAR_MIN - 1900)
+
+#define SECS_PER_DAY				(24 * 3600ULL)
+
+/*
+ * There are other differences between models, including:
+ *
+ *   - number of GPIO pins that can be configured to hold a certain level
+ *   - crypto-key related registers (H5, H6)
+ *   - boot process related (super standby, secondary processor entry address)
+ *     registers (R40, H6)
+ *   - SYS power domain controls (R40)
+ *   - DCXO controls (H6)
+ *   - RC oscillator calibration (H6)
+ *
+ * These functions are not covered by this driver.
+ */
+struct sun6i_rtc_clk_data {
+	unsigned long rc_osc_rate;
+	unsigned int fixed_prescaler : 16;
+	unsigned int has_prescaler : 1;
+	unsigned int has_out_clk : 1;
+	unsigned int has_losc_en : 1;
+	unsigned int has_auto_swt : 1;
+};
+
+#define RTC_LINEAR_DAY	BIT(0)
+
+struct sun6i_rtc_dev {
+	struct rtc_device *rtc;
+	const struct sun6i_rtc_clk_data *data;
+	void __iomem *base;
+	int irq;
+	time64_t alarm;
+	unsigned long flags;
+
+	struct clk_hw hw;
+	struct clk_hw *int_osc;
+	struct clk *losc;
+	struct clk *ext_losc;
+
+	spinlock_t lock;
+};
+
+static struct sun6i_rtc_dev *sun6i_rtc;
+
+static unsigned long sun6i_rtc_osc_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
+	u32 val = 0;
+
+	val = readl(rtc->base + SUN6I_LOSC_CTRL);
+	if (val & SUN6I_LOSC_CTRL_EXT_OSC)
+		return parent_rate;
+
+	if (rtc->data->fixed_prescaler)
+		parent_rate /= rtc->data->fixed_prescaler;
+
+	if (rtc->data->has_prescaler) {
+		val = readl(rtc->base + SUN6I_LOSC_CLK_PRESCAL);
+		val &= GENMASK(4, 0);
+	}
+
+	return parent_rate / (val + 1);
+}
+
+static u8 sun6i_rtc_osc_get_parent(struct clk_hw *hw)
+{
+	struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
+
+	return readl(rtc->base + SUN6I_LOSC_CTRL) & SUN6I_LOSC_CTRL_EXT_OSC;
+}
+
+static int sun6i_rtc_osc_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct sun6i_rtc_dev *rtc = container_of(hw, struct sun6i_rtc_dev, hw);
+	unsigned long flags;
+	u32 val;
+
+	if (index > 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&rtc->lock, flags);
+	val = readl(rtc->base + SUN6I_LOSC_CTRL);
+	val &= ~SUN6I_LOSC_CTRL_EXT_OSC;
+	val |= SUN6I_LOSC_CTRL_KEY;
+	val |= index ? SUN6I_LOSC_CTRL_EXT_OSC : 0;
+	if (rtc->data->has_losc_en) {
+		val &= ~SUN6I_LOSC_CTRL_EXT_LOSC_EN;
+		val |= index ? SUN6I_LOSC_CTRL_EXT_LOSC_EN : 0;
+	}
+	writel(val, rtc->base + SUN6I_LOSC_CTRL);
+	spin_unlock_irqrestore(&rtc->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops sun6i_rtc_osc_ops = {
+	.recalc_rate	= sun6i_rtc_osc_recalc_rate,
+
+	.get_parent	= sun6i_rtc_osc_get_parent,
+	.set_parent	= sun6i_rtc_osc_set_parent,
+};
+
+static void __init sun6i_rtc_clk_init(struct device_node *node,
+				      const struct sun6i_rtc_clk_data *data)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct sun6i_rtc_dev *rtc;
+	struct clk_init_data init = {
+		.ops		= &sun6i_rtc_osc_ops,
+		.name		= "losc",
+	};
+	const char *iosc_name = "rtc-int-osc";
+	const char *clkout_name = "osc32k-out";
+	const char *parents[2];
+	u32 reg;
+
+	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return;
+
+	rtc->data = data;
+	clk_data = kzalloc(struct_size(clk_data, hws, 3), GFP_KERNEL);
+	if (!clk_data) {
+		kfree(rtc);
+		return;
+	}
+
+	spin_lock_init(&rtc->lock);
+
+	rtc->base = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(rtc->base)) {
+		pr_crit("Can't map RTC registers");
+		goto err;
+	}
+
+	reg = SUN6I_LOSC_CTRL_KEY;
+	if (rtc->data->has_auto_swt) {
+		/* Bypass auto-switch to int osc, on ext losc failure */
+		reg |= SUN6I_LOSC_CTRL_AUTO_SWT_BYPASS;
+		writel(reg, rtc->base + SUN6I_LOSC_CTRL);
+	}
+
+	/* Switch to the external, more precise, oscillator, if present */
+	if (of_get_property(node, "clocks", NULL)) {
+		reg |= SUN6I_LOSC_CTRL_EXT_OSC;
+		if (rtc->data->has_losc_en)
+			reg |= SUN6I_LOSC_CTRL_EXT_LOSC_EN;
+	}
+	writel(reg, rtc->base + SUN6I_LOSC_CTRL);
+
+	/* Yes, I know, this is ugly. */
+	sun6i_rtc = rtc;
+
+	of_property_read_string_index(node, "clock-output-names", 2,
+				      &iosc_name);
+
+	rtc->int_osc = clk_hw_register_fixed_rate_with_accuracy(NULL,
+								iosc_name,
+								NULL, 0,
+								rtc->data->rc_osc_rate,
+								300000000);
+	if (IS_ERR(rtc->int_osc)) {
+		pr_crit("Couldn't register the internal oscillator\n");
+		goto err;
+	}
+
+	parents[0] = clk_hw_get_name(rtc->int_osc);
+	/* If there is no external oscillator, this will be NULL and ... */
+	parents[1] = of_clk_get_parent_name(node, 0);
+
+	rtc->hw.init = &init;
+
+	init.parent_names = parents;
+	/* ... number of clock parents will be 1. */
+	init.num_parents = of_clk_get_parent_count(node) + 1;
+	of_property_read_string_index(node, "clock-output-names", 0,
+				      &init.name);
+
+	rtc->losc = clk_register(NULL, &rtc->hw);
+	if (IS_ERR(rtc->losc)) {
+		pr_crit("Couldn't register the LOSC clock\n");
+		goto err_register;
+	}
+
+	of_property_read_string_index(node, "clock-output-names", 1,
+				      &clkout_name);
+	rtc->ext_losc = clk_register_gate(NULL, clkout_name, init.name,
+					  0, rtc->base + SUN6I_LOSC_OUT_GATING,
+					  SUN6I_LOSC_OUT_GATING_EN_OFFSET, 0,
+					  &rtc->lock);
+	if (IS_ERR(rtc->ext_losc)) {
+		pr_crit("Couldn't register the LOSC external gate\n");
+		goto err_register;
+	}
+
+	clk_data->num = 3;
+	clk_data->hws[0] = &rtc->hw;
+	clk_data->hws[1] = __clk_get_hw(rtc->ext_losc);
+	clk_data->hws[2] = rtc->int_osc;
+	of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+	return;
+
+err_register:
+	clk_hw_unregister_fixed_rate(rtc->int_osc);
+err:
+	kfree(clk_data);
+}
+
+static const struct sun6i_rtc_clk_data sun6i_a31_rtc_data = {
+	.rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */
+	.has_prescaler = 1,
+};
+
+static void __init sun6i_a31_rtc_clk_init(struct device_node *node)
+{
+	sun6i_rtc_clk_init(node, &sun6i_a31_rtc_data);
+}
+CLK_OF_DECLARE_DRIVER(sun6i_a31_rtc_clk, "allwinner,sun6i-a31-rtc",
+		      sun6i_a31_rtc_clk_init);
+
+static const struct sun6i_rtc_clk_data sun8i_a23_rtc_data = {
+	.rc_osc_rate = 667000, /* datasheet says 600 ~ 700 KHz */
+	.has_prescaler = 1,
+	.has_out_clk = 1,
+};
+
+static void __init sun8i_a23_rtc_clk_init(struct device_node *node)
+{
+	sun6i_rtc_clk_init(node, &sun8i_a23_rtc_data);
+}
+CLK_OF_DECLARE_DRIVER(sun8i_a23_rtc_clk, "allwinner,sun8i-a23-rtc",
+		      sun8i_a23_rtc_clk_init);
+
+static const struct sun6i_rtc_clk_data sun8i_h3_rtc_data = {
+	.rc_osc_rate = 16000000,
+	.fixed_prescaler = 32,
+	.has_prescaler = 1,
+	.has_out_clk = 1,
+};
+
+static void __init sun8i_h3_rtc_clk_init(struct device_node *node)
+{
+	sun6i_rtc_clk_init(node, &sun8i_h3_rtc_data);
+}
+CLK_OF_DECLARE_DRIVER(sun8i_h3_rtc_clk, "allwinner,sun8i-h3-rtc",
+		      sun8i_h3_rtc_clk_init);
+/* As far as we are concerned, clocks for H5 are the same as H3 */
+CLK_OF_DECLARE_DRIVER(sun50i_h5_rtc_clk, "allwinner,sun50i-h5-rtc",
+		      sun8i_h3_rtc_clk_init);
+
+static const struct sun6i_rtc_clk_data sun50i_h6_rtc_data = {
+	.rc_osc_rate = 16000000,
+	.fixed_prescaler = 32,
+	.has_prescaler = 1,
+	.has_out_clk = 1,
+	.has_losc_en = 1,
+	.has_auto_swt = 1,
+};
+
+static void __init sun50i_h6_rtc_clk_init(struct device_node *node)
+{
+	sun6i_rtc_clk_init(node, &sun50i_h6_rtc_data);
+}
+CLK_OF_DECLARE_DRIVER(sun50i_h6_rtc_clk, "allwinner,sun50i-h6-rtc",
+		      sun50i_h6_rtc_clk_init);
+
+/*
+ * The R40 user manual is self-conflicting on whether the prescaler is
+ * fixed or configurable. The clock diagram shows it as fixed, but there
+ * is also a configurable divider in the RTC block.
+ */
+static const struct sun6i_rtc_clk_data sun8i_r40_rtc_data = {
+	.rc_osc_rate = 16000000,
+	.fixed_prescaler = 512,
+};
+static void __init sun8i_r40_rtc_clk_init(struct device_node *node)
+{
+	sun6i_rtc_clk_init(node, &sun8i_r40_rtc_data);
+}
+CLK_OF_DECLARE_DRIVER(sun8i_r40_rtc_clk, "allwinner,sun8i-r40-rtc",
+		      sun8i_r40_rtc_clk_init);
+
+static const struct sun6i_rtc_clk_data sun8i_v3_rtc_data = {
+	.rc_osc_rate = 32000,
+	.has_out_clk = 1,
+};
+
+static void __init sun8i_v3_rtc_clk_init(struct device_node *node)
+{
+	sun6i_rtc_clk_init(node, &sun8i_v3_rtc_data);
+}
+CLK_OF_DECLARE_DRIVER(sun8i_v3_rtc_clk, "allwinner,sun8i-v3-rtc",
+		      sun8i_v3_rtc_clk_init);
+
+static irqreturn_t sun6i_rtc_alarmirq(int irq, void *id)
+{
+	struct sun6i_rtc_dev *chip = (struct sun6i_rtc_dev *) id;
+	irqreturn_t ret = IRQ_NONE;
+	u32 val;
+
+	spin_lock(&chip->lock);
+	val = readl(chip->base + SUN6I_ALRM_IRQ_STA);
+
+	if (val & SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND) {
+		val |= SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND;
+		writel(val, chip->base + SUN6I_ALRM_IRQ_STA);
+
+		rtc_update_irq(chip->rtc, 1, RTC_AF | RTC_IRQF);
+
+		ret = IRQ_HANDLED;
+	}
+	spin_unlock(&chip->lock);
+
+	return ret;
+}
+
+static void sun6i_rtc_setaie(int to, struct sun6i_rtc_dev *chip)
+{
+	u32 alrm_val = 0;
+	u32 alrm_irq_val = 0;
+	u32 alrm_wake_val = 0;
+	unsigned long flags;
+
+	if (to) {
+		alrm_val = SUN6I_ALRM_EN_CNT_EN;
+		alrm_irq_val = SUN6I_ALRM_IRQ_EN_CNT_IRQ_EN;
+		alrm_wake_val = SUN6I_ALARM_CONFIG_WAKEUP;
+	} else {
+		writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
+		       chip->base + SUN6I_ALRM_IRQ_STA);
+	}
+
+	spin_lock_irqsave(&chip->lock, flags);
+	writel(alrm_val, chip->base + SUN6I_ALRM_EN);
+	writel(alrm_irq_val, chip->base + SUN6I_ALRM_IRQ_EN);
+	writel(alrm_wake_val, chip->base + SUN6I_ALARM_CONFIG);
+	spin_unlock_irqrestore(&chip->lock, flags);
+}
+
+static int sun6i_rtc_gettime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+	u32 date, time;
+
+	/*
+	 * read again in case it changes
+	 */
+	do {
+		date = readl(chip->base + SUN6I_RTC_YMD);
+		time = readl(chip->base + SUN6I_RTC_HMS);
+	} while ((date != readl(chip->base + SUN6I_RTC_YMD)) ||
+		 (time != readl(chip->base + SUN6I_RTC_HMS)));
+
+	if (chip->flags & RTC_LINEAR_DAY) {
+		/*
+		 * Newer chips store a linear day number, the manual
+		 * does not mandate any epoch base. The BSP driver uses
+		 * the UNIX epoch, let's just copy that, as it's the
+		 * easiest anyway.
+		 */
+		rtc_time64_to_tm((date & 0xffff) * SECS_PER_DAY, rtc_tm);
+	} else {
+		rtc_tm->tm_mday = SUN6I_DATE_GET_DAY_VALUE(date);
+		rtc_tm->tm_mon  = SUN6I_DATE_GET_MON_VALUE(date) - 1;
+		rtc_tm->tm_year = SUN6I_DATE_GET_YEAR_VALUE(date);
+
+		/*
+		 * switch from (data_year->min)-relative offset to
+		 * a (1900)-relative one
+		 */
+		rtc_tm->tm_year += SUN6I_YEAR_OFF;
+	}
+
+	rtc_tm->tm_sec  = SUN6I_TIME_GET_SEC_VALUE(time);
+	rtc_tm->tm_min  = SUN6I_TIME_GET_MIN_VALUE(time);
+	rtc_tm->tm_hour = SUN6I_TIME_GET_HOUR_VALUE(time);
+
+	return 0;
+}
+
+static int sun6i_rtc_getalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+	unsigned long flags;
+	u32 alrm_st;
+	u32 alrm_en;
+
+	spin_lock_irqsave(&chip->lock, flags);
+	alrm_en = readl(chip->base + SUN6I_ALRM_IRQ_EN);
+	alrm_st = readl(chip->base + SUN6I_ALRM_IRQ_STA);
+	spin_unlock_irqrestore(&chip->lock, flags);
+
+	wkalrm->enabled = !!(alrm_en & SUN6I_ALRM_EN_CNT_EN);
+	wkalrm->pending = !!(alrm_st & SUN6I_ALRM_EN_CNT_EN);
+	rtc_time64_to_tm(chip->alarm, &wkalrm->time);
+
+	return 0;
+}
+
+static int sun6i_rtc_setalarm(struct device *dev, struct rtc_wkalrm *wkalrm)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+	struct rtc_time *alrm_tm = &wkalrm->time;
+	struct rtc_time tm_now;
+	time64_t time_set;
+	u32 counter_val, counter_val_hms;
+	int ret;
+
+	time_set = rtc_tm_to_time64(alrm_tm);
+
+	if (chip->flags & RTC_LINEAR_DAY) {
+		/*
+		 * The alarm registers hold the actual alarm time, encoded
+		 * in the same way (linear day + HMS) as the current time.
+		 */
+		counter_val_hms = SUN6I_TIME_SET_SEC_VALUE(alrm_tm->tm_sec)  |
+				  SUN6I_TIME_SET_MIN_VALUE(alrm_tm->tm_min)  |
+				  SUN6I_TIME_SET_HOUR_VALUE(alrm_tm->tm_hour);
+		/* The division will cut off the H:M:S part of alrm_tm. */
+		counter_val = div_u64(rtc_tm_to_time64(alrm_tm), SECS_PER_DAY);
+	} else {
+		/* The alarm register holds the number of seconds left. */
+		time64_t time_now;
+
+		ret = sun6i_rtc_gettime(dev, &tm_now);
+		if (ret < 0) {
+			dev_err(dev, "Error in getting time\n");
+			return -EINVAL;
+		}
+
+		time_now = rtc_tm_to_time64(&tm_now);
+		if (time_set <= time_now) {
+			dev_err(dev, "Date to set in the past\n");
+			return -EINVAL;
+		}
+		if ((time_set - time_now) > U32_MAX) {
+			dev_err(dev, "Date too far in the future\n");
+			return -EINVAL;
+		}
+
+		counter_val = time_set - time_now;
+	}
+
+	sun6i_rtc_setaie(0, chip);
+	writel(0, chip->base + SUN6I_ALRM_COUNTER);
+	if (chip->flags & RTC_LINEAR_DAY)
+		writel(0, chip->base + SUN6I_ALRM_COUNTER_HMS);
+	usleep_range(100, 300);
+
+	writel(counter_val, chip->base + SUN6I_ALRM_COUNTER);
+	if (chip->flags & RTC_LINEAR_DAY)
+		writel(counter_val_hms, chip->base + SUN6I_ALRM_COUNTER_HMS);
+	chip->alarm = time_set;
+
+	sun6i_rtc_setaie(wkalrm->enabled, chip);
+
+	return 0;
+}
+
+static int sun6i_rtc_wait(struct sun6i_rtc_dev *chip, int offset,
+			  unsigned int mask, unsigned int ms_timeout)
+{
+	const unsigned long timeout = jiffies + msecs_to_jiffies(ms_timeout);
+	u32 reg;
+
+	do {
+		reg = readl(chip->base + offset);
+		reg &= mask;
+
+		if (!reg)
+			return 0;
+
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int sun6i_rtc_settime(struct device *dev, struct rtc_time *rtc_tm)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+	u32 date = 0;
+	u32 time = 0;
+
+	time = SUN6I_TIME_SET_SEC_VALUE(rtc_tm->tm_sec)  |
+		SUN6I_TIME_SET_MIN_VALUE(rtc_tm->tm_min)  |
+		SUN6I_TIME_SET_HOUR_VALUE(rtc_tm->tm_hour);
+
+	if (chip->flags & RTC_LINEAR_DAY) {
+		/* The division will cut off the H:M:S part of rtc_tm. */
+		date = div_u64(rtc_tm_to_time64(rtc_tm), SECS_PER_DAY);
+	} else {
+		rtc_tm->tm_year -= SUN6I_YEAR_OFF;
+		rtc_tm->tm_mon += 1;
+
+		date = SUN6I_DATE_SET_DAY_VALUE(rtc_tm->tm_mday) |
+			SUN6I_DATE_SET_MON_VALUE(rtc_tm->tm_mon)  |
+			SUN6I_DATE_SET_YEAR_VALUE(rtc_tm->tm_year);
+
+		if (is_leap_year(rtc_tm->tm_year + SUN6I_YEAR_MIN))
+			date |= SUN6I_LEAP_SET_VALUE(1);
+	}
+
+	/* Check whether registers are writable */
+	if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
+			   SUN6I_LOSC_CTRL_ACC_MASK, 50)) {
+		dev_err(dev, "rtc is still busy.\n");
+		return -EBUSY;
+	}
+
+	writel(time, chip->base + SUN6I_RTC_HMS);
+
+	/*
+	 * After writing the RTC HH-MM-SS register, the
+	 * SUN6I_LOSC_CTRL_RTC_HMS_ACC bit is set and it will not
+	 * be cleared until the real writing operation is finished
+	 */
+
+	if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
+			   SUN6I_LOSC_CTRL_RTC_HMS_ACC, 50)) {
+		dev_err(dev, "Failed to set rtc time.\n");
+		return -ETIMEDOUT;
+	}
+
+	writel(date, chip->base + SUN6I_RTC_YMD);
+
+	/*
+	 * After writing the RTC YY-MM-DD register, the
+	 * SUN6I_LOSC_CTRL_RTC_YMD_ACC bit is set and it will not
+	 * be cleared until the real writing operation is finished
+	 */
+
+	if (sun6i_rtc_wait(chip, SUN6I_LOSC_CTRL,
+			   SUN6I_LOSC_CTRL_RTC_YMD_ACC, 50)) {
+		dev_err(dev, "Failed to set rtc time.\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int sun6i_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+
+	if (!enabled)
+		sun6i_rtc_setaie(enabled, chip);
+
+	return 0;
+}
+
+static const struct rtc_class_ops sun6i_rtc_ops = {
+	.read_time		= sun6i_rtc_gettime,
+	.set_time		= sun6i_rtc_settime,
+	.read_alarm		= sun6i_rtc_getalarm,
+	.set_alarm		= sun6i_rtc_setalarm,
+	.alarm_irq_enable	= sun6i_rtc_alarm_irq_enable
+};
+
+static int sun6i_rtc_nvmem_read(void *priv, unsigned int offset, void *_val, size_t bytes)
+{
+	struct sun6i_rtc_dev *chip = priv;
+	u32 *val = _val;
+	int i;
+
+	for (i = 0; i < bytes / 4; ++i)
+		val[i] = readl(chip->base + SUN6I_GP_DATA + offset + 4 * i);
+
+	return 0;
+}
+
+static int sun6i_rtc_nvmem_write(void *priv, unsigned int offset, void *_val, size_t bytes)
+{
+	struct sun6i_rtc_dev *chip = priv;
+	u32 *val = _val;
+	int i;
+
+	for (i = 0; i < bytes / 4; ++i)
+		writel(val[i], chip->base + SUN6I_GP_DATA + offset + 4 * i);
+
+	return 0;
+}
+
+static struct nvmem_config sun6i_rtc_nvmem_cfg = {
+	.type		= NVMEM_TYPE_BATTERY_BACKED,
+	.reg_read	= sun6i_rtc_nvmem_read,
+	.reg_write	= sun6i_rtc_nvmem_write,
+	.size		= SUN6I_GP_DATA_SIZE,
+	.word_size	= 4,
+	.stride		= 4,
+};
+
+#ifdef CONFIG_PM_SLEEP
+/* Enable IRQ wake on suspend, to wake up from RTC. */
+static int sun6i_rtc_suspend(struct device *dev)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(chip->irq);
+
+	return 0;
+}
+
+/* Disable IRQ wake on resume. */
+static int sun6i_rtc_resume(struct device *dev)
+{
+	struct sun6i_rtc_dev *chip = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(chip->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sun6i_rtc_pm_ops,
+	sun6i_rtc_suspend, sun6i_rtc_resume);
+
+static void sun6i_rtc_bus_clk_cleanup(void *data)
+{
+	struct clk *bus_clk = data;
+
+	clk_disable_unprepare(bus_clk);
+}
+
+static int sun6i_rtc_probe(struct platform_device *pdev)
+{
+	struct sun6i_rtc_dev *chip = sun6i_rtc;
+	struct device *dev = &pdev->dev;
+	struct clk *bus_clk;
+	int ret;
+
+	bus_clk = devm_clk_get_optional(dev, "bus");
+	if (IS_ERR(bus_clk))
+		return PTR_ERR(bus_clk);
+
+	if (bus_clk) {
+		ret = clk_prepare_enable(bus_clk);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, sun6i_rtc_bus_clk_cleanup,
+					       bus_clk);
+		if (ret)
+			return ret;
+	}
+
+	if (!chip) {
+		chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+		if (!chip)
+			return -ENOMEM;
+
+		spin_lock_init(&chip->lock);
+
+		chip->base = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(chip->base))
+			return PTR_ERR(chip->base);
+
+		if (IS_REACHABLE(CONFIG_SUN6I_RTC_CCU)) {
+			ret = sun6i_rtc_ccu_probe(dev, chip->base);
+			if (ret)
+				return ret;
+		}
+	}
+
+	platform_set_drvdata(pdev, chip);
+
+	chip->flags = (unsigned long)of_device_get_match_data(&pdev->dev);
+
+	chip->irq = platform_get_irq(pdev, 0);
+	if (chip->irq < 0)
+		return chip->irq;
+
+	ret = devm_request_irq(&pdev->dev, chip->irq, sun6i_rtc_alarmirq,
+			       0, dev_name(&pdev->dev), chip);
+	if (ret) {
+		dev_err(&pdev->dev, "Could not request IRQ\n");
+		return ret;
+	}
+
+	/* clear the alarm counter value */
+	writel(0, chip->base + SUN6I_ALRM_COUNTER);
+
+	/* disable counter alarm */
+	writel(0, chip->base + SUN6I_ALRM_EN);
+
+	/* disable counter alarm interrupt */
+	writel(0, chip->base + SUN6I_ALRM_IRQ_EN);
+
+	/* disable week alarm */
+	writel(0, chip->base + SUN6I_ALRM1_EN);
+
+	/* disable week alarm interrupt */
+	writel(0, chip->base + SUN6I_ALRM1_IRQ_EN);
+
+	/* clear counter alarm pending interrupts */
+	writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND,
+	       chip->base + SUN6I_ALRM_IRQ_STA);
+
+	/* clear week alarm pending interrupts */
+	writel(SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND,
+	       chip->base + SUN6I_ALRM1_IRQ_STA);
+
+	/* disable alarm wakeup */
+	writel(0, chip->base + SUN6I_ALARM_CONFIG);
+
+	clk_prepare_enable(chip->losc);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	chip->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(chip->rtc))
+		return PTR_ERR(chip->rtc);
+
+	chip->rtc->ops = &sun6i_rtc_ops;
+	if (chip->flags & RTC_LINEAR_DAY)
+		chip->rtc->range_max = (65536 * SECS_PER_DAY) - 1;
+	else
+		chip->rtc->range_max = 2019686399LL; /* 2033-12-31 23:59:59 */
+
+	ret = devm_rtc_register_device(chip->rtc);
+	if (ret)
+		return ret;
+
+	sun6i_rtc_nvmem_cfg.priv = chip;
+	ret = devm_rtc_nvmem_register(chip->rtc, &sun6i_rtc_nvmem_cfg);
+	if (ret)
+		return ret;
+
+	dev_info(&pdev->dev, "RTC enabled\n");
+
+	return 0;
+}
+
+/*
+ * As far as RTC functionality goes, all models are the same. The
+ * datasheets claim that different models have different number of
+ * registers available for non-volatile storage, but experiments show
+ * that all SoCs have 16 registers available for this purpose.
+ */
+static const struct of_device_id sun6i_rtc_dt_ids[] = {
+	{ .compatible = "allwinner,sun6i-a31-rtc" },
+	{ .compatible = "allwinner,sun8i-a23-rtc" },
+	{ .compatible = "allwinner,sun8i-h3-rtc" },
+	{ .compatible = "allwinner,sun8i-r40-rtc" },
+	{ .compatible = "allwinner,sun8i-v3-rtc" },
+	{ .compatible = "allwinner,sun50i-h5-rtc" },
+	{ .compatible = "allwinner,sun50i-h6-rtc" },
+	{ .compatible = "allwinner,sun50i-h616-rtc",
+		.data = (void *)RTC_LINEAR_DAY },
+	{ .compatible = "allwinner,sun50i-r329-rtc",
+		.data = (void *)RTC_LINEAR_DAY },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids);
+
+static struct platform_driver sun6i_rtc_driver = {
+	.probe		= sun6i_rtc_probe,
+	.driver		= {
+		.name		= "sun6i-rtc",
+		.of_match_table = sun6i_rtc_dt_ids,
+		.pm = &sun6i_rtc_pm_ops,
+	},
+};
+builtin_platform_driver(sun6i_rtc_driver);