diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/scsi/BusLogic.c | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/scsi/BusLogic.c')
-rw-r--r-- | drivers/scsi/BusLogic.c | 3738 |
1 files changed, 3738 insertions, 0 deletions
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c new file mode 100644 index 000000000..f2abffce2 --- /dev/null +++ b/drivers/scsi/BusLogic.c @@ -0,0 +1,3738 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + + Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters + + Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> + + + The author respectfully requests that any modifications to this software be + sent directly to him for evaluation and testing. + + Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose + advice has been invaluable, to David Gentzel, for writing the original Linux + BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site. + + Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB + Manager available as freely redistributable source code. + +*/ + +#define blogic_drvr_version "2.1.17" +#define blogic_drvr_date "12 September 2013" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/mm.h> +#include <linux/stat.h> +#include <linux/pci.h> +#include <linux/spinlock.h> +#include <linux/jiffies.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/msdos_partition.h> +#include <scsi/scsicam.h> + +#include <asm/dma.h> +#include <asm/io.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include "BusLogic.h" +#include "FlashPoint.c" + +#ifndef FAILURE +#define FAILURE (-1) +#endif + +static struct scsi_host_template blogic_template; + +/* + blogic_drvr_options_count is a count of the number of BusLogic Driver + Options specifications provided via the Linux Kernel Command Line or via + the Loadable Kernel Module Installation Facility. +*/ + +static int blogic_drvr_options_count; + + +/* + blogic_drvr_options is an array of Driver Options structures representing + BusLogic Driver Options specifications provided via the Linux Kernel Command + Line or via the Loadable Kernel Module Installation Facility. +*/ + +static struct blogic_drvr_options blogic_drvr_options[BLOGIC_MAX_ADAPTERS]; + + +/* + BusLogic can be assigned a string by insmod. +*/ + +MODULE_LICENSE("GPL"); +#ifdef MODULE +static char *BusLogic; +module_param(BusLogic, charp, 0); +#endif + + +/* + blogic_probe_options is a set of Probe Options to be applied across + all BusLogic Host Adapters. +*/ + +static struct blogic_probe_options blogic_probe_options; + + +/* + blogic_global_options is a set of Global Options to be applied across + all BusLogic Host Adapters. +*/ + +static struct blogic_global_options blogic_global_options; + +static LIST_HEAD(blogic_host_list); + +/* + blogic_probeinfo_count is the number of entries in blogic_probeinfo_list. +*/ + +static int blogic_probeinfo_count; + + +/* + blogic_probeinfo_list is the list of I/O Addresses and Bus Probe Information + to be checked for potential BusLogic Host Adapters. It is initialized by + interrogating the PCI Configuration Space on PCI machines as well as from the + list of standard BusLogic I/O Addresses. +*/ + +static struct blogic_probeinfo *blogic_probeinfo_list; + + +/* + blogic_cmd_failure_reason holds a string identifying the reason why a + call to blogic_cmd failed. It is only non-NULL when blogic_cmd + returns a failure code. +*/ + +static char *blogic_cmd_failure_reason; + +/* + blogic_announce_drvr announces the Driver Version and Date, Author's + Name, Copyright Notice, and Electronic Mail Address. +*/ + +static void blogic_announce_drvr(struct blogic_adapter *adapter) +{ + blogic_announce("***** BusLogic SCSI Driver Version " blogic_drvr_version " of " blogic_drvr_date " *****\n", adapter); + blogic_announce("Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>\n", adapter); +} + + +/* + blogic_drvr_info returns the Host Adapter Name to identify this SCSI + Driver and Host Adapter. +*/ + +static const char *blogic_drvr_info(struct Scsi_Host *host) +{ + struct blogic_adapter *adapter = + (struct blogic_adapter *) host->hostdata; + return adapter->full_model; +} + +/* + blogic_init_ccbs initializes a group of Command Control Blocks (CCBs) + for Host Adapter from the blk_size bytes located at blk_pointer. The newly + created CCBs are added to Host Adapter's free list. +*/ + +static void blogic_init_ccbs(struct blogic_adapter *adapter, void *blk_pointer, + int blk_size, dma_addr_t blkp) +{ + struct blogic_ccb *ccb = (struct blogic_ccb *) blk_pointer; + unsigned int offset = 0; + memset(blk_pointer, 0, blk_size); + ccb->allocgrp_head = blkp; + ccb->allocgrp_size = blk_size; + while ((blk_size -= sizeof(struct blogic_ccb)) >= 0) { + ccb->status = BLOGIC_CCB_FREE; + ccb->adapter = adapter; + ccb->dma_handle = (u32) blkp + offset; + if (blogic_flashpoint_type(adapter)) { + ccb->callback = blogic_qcompleted_ccb; + ccb->base_addr = adapter->fpinfo.base_addr; + } + ccb->next = adapter->free_ccbs; + ccb->next_all = adapter->all_ccbs; + adapter->free_ccbs = ccb; + adapter->all_ccbs = ccb; + adapter->alloc_ccbs++; + ccb++; + offset += sizeof(struct blogic_ccb); + } +} + + +/* + blogic_create_initccbs allocates the initial CCBs for Host Adapter. +*/ + +static bool __init blogic_create_initccbs(struct blogic_adapter *adapter) +{ + int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb); + void *blk_pointer; + dma_addr_t blkp; + + while (adapter->alloc_ccbs < adapter->initccbs) { + blk_pointer = dma_alloc_coherent(&adapter->pci_device->dev, + blk_size, &blkp, GFP_KERNEL); + if (blk_pointer == NULL) { + blogic_err("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n", + adapter); + return false; + } + blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp); + } + return true; +} + + +/* + blogic_destroy_ccbs deallocates the CCBs for Host Adapter. +*/ + +static void blogic_destroy_ccbs(struct blogic_adapter *adapter) +{ + struct blogic_ccb *next_ccb = adapter->all_ccbs, *ccb, *lastccb = NULL; + adapter->all_ccbs = NULL; + adapter->free_ccbs = NULL; + while ((ccb = next_ccb) != NULL) { + next_ccb = ccb->next_all; + if (ccb->allocgrp_head) { + if (lastccb) + dma_free_coherent(&adapter->pci_device->dev, + lastccb->allocgrp_size, lastccb, + lastccb->allocgrp_head); + lastccb = ccb; + } + } + if (lastccb) + dma_free_coherent(&adapter->pci_device->dev, + lastccb->allocgrp_size, lastccb, + lastccb->allocgrp_head); +} + + +/* + blogic_create_addlccbs allocates Additional CCBs for Host Adapter. If + allocation fails and there are no remaining CCBs available, the Driver Queue + Depth is decreased to a known safe value to avoid potential deadlocks when + multiple host adapters share the same IRQ Channel. +*/ + +static void blogic_create_addlccbs(struct blogic_adapter *adapter, + int addl_ccbs, bool print_success) +{ + int blk_size = BLOGIC_CCB_GRP_ALLOCSIZE * sizeof(struct blogic_ccb); + int prev_alloc = adapter->alloc_ccbs; + void *blk_pointer; + dma_addr_t blkp; + if (addl_ccbs <= 0) + return; + while (adapter->alloc_ccbs - prev_alloc < addl_ccbs) { + blk_pointer = dma_alloc_coherent(&adapter->pci_device->dev, + blk_size, &blkp, GFP_KERNEL); + if (blk_pointer == NULL) + break; + blogic_init_ccbs(adapter, blk_pointer, blk_size, blkp); + } + if (adapter->alloc_ccbs > prev_alloc) { + if (print_success) + blogic_notice("Allocated %d additional CCBs (total now %d)\n", adapter, adapter->alloc_ccbs - prev_alloc, adapter->alloc_ccbs); + return; + } + blogic_notice("Failed to allocate additional CCBs\n", adapter); + if (adapter->drvr_qdepth > adapter->alloc_ccbs - adapter->tgt_count) { + adapter->drvr_qdepth = adapter->alloc_ccbs - adapter->tgt_count; + adapter->scsi_host->can_queue = adapter->drvr_qdepth; + } +} + +/* + blogic_alloc_ccb allocates a CCB from Host Adapter's free list, + allocating more memory from the Kernel if necessary. The Host Adapter's + Lock should already have been acquired by the caller. +*/ + +static struct blogic_ccb *blogic_alloc_ccb(struct blogic_adapter *adapter) +{ + static unsigned long serial; + struct blogic_ccb *ccb; + ccb = adapter->free_ccbs; + if (ccb != NULL) { + ccb->serial = ++serial; + adapter->free_ccbs = ccb->next; + ccb->next = NULL; + if (adapter->free_ccbs == NULL) + blogic_create_addlccbs(adapter, adapter->inc_ccbs, + true); + return ccb; + } + blogic_create_addlccbs(adapter, adapter->inc_ccbs, true); + ccb = adapter->free_ccbs; + if (ccb == NULL) + return NULL; + ccb->serial = ++serial; + adapter->free_ccbs = ccb->next; + ccb->next = NULL; + return ccb; +} + + +/* + blogic_dealloc_ccb deallocates a CCB, returning it to the Host Adapter's + free list. The Host Adapter's Lock should already have been acquired by the + caller. +*/ + +static void blogic_dealloc_ccb(struct blogic_ccb *ccb, int dma_unmap) +{ + struct blogic_adapter *adapter = ccb->adapter; + + if (ccb->command != NULL) + scsi_dma_unmap(ccb->command); + if (dma_unmap) + dma_unmap_single(&adapter->pci_device->dev, ccb->sensedata, + ccb->sense_datalen, DMA_FROM_DEVICE); + + ccb->command = NULL; + ccb->status = BLOGIC_CCB_FREE; + ccb->next = adapter->free_ccbs; + adapter->free_ccbs = ccb; +} + + +/* + blogic_cmd sends the command opcode to adapter, optionally + providing paramlen bytes of param and receiving at most + replylen bytes of reply; any excess reply data is received but + discarded. + + On success, this function returns the number of reply bytes read from + the Host Adapter (including any discarded data); on failure, it returns + -1 if the command was invalid, or -2 if a timeout occurred. + + blogic_cmd is called exclusively during host adapter detection and + initialization, so performance and latency are not critical, and exclusive + access to the Host Adapter hardware is assumed. Once the host adapter and + driver are initialized, the only Host Adapter command that is issued is the + single byte Execute Mailbox Command operation code, which does not require + waiting for the Host Adapter Ready bit to be set in the Status Register. +*/ + +static int blogic_cmd(struct blogic_adapter *adapter, enum blogic_opcode opcode, + void *param, int paramlen, void *reply, int replylen) +{ + unsigned char *param_p = (unsigned char *) param; + unsigned char *reply_p = (unsigned char *) reply; + union blogic_stat_reg statusreg; + union blogic_int_reg intreg; + unsigned long processor_flag = 0; + int reply_b = 0, result; + long timeout; + /* + Clear out the Reply Data if provided. + */ + if (replylen > 0) + memset(reply, 0, replylen); + /* + If the IRQ Channel has not yet been acquired, then interrupts + must be disabled while issuing host adapter commands since a + Command Complete interrupt could occur if the IRQ Channel was + previously enabled by another BusLogic Host Adapter or another + driver sharing the same IRQ Channel. + */ + if (!adapter->irq_acquired) + local_irq_save(processor_flag); + /* + Wait for the Host Adapter Ready bit to be set and the + Command/Parameter Register Busy bit to be reset in the Status + Register. + */ + timeout = 10000; + while (--timeout >= 0) { + statusreg.all = blogic_rdstatus(adapter); + if (statusreg.sr.adapter_ready && !statusreg.sr.cmd_param_busy) + break; + udelay(100); + } + if (timeout < 0) { + blogic_cmd_failure_reason = + "Timeout waiting for Host Adapter Ready"; + result = -2; + goto done; + } + /* + Write the opcode to the Command/Parameter Register. + */ + adapter->adapter_cmd_complete = false; + blogic_setcmdparam(adapter, opcode); + /* + Write any additional Parameter Bytes. + */ + timeout = 10000; + while (paramlen > 0 && --timeout >= 0) { + /* + Wait 100 microseconds to give the Host Adapter enough + time to determine whether the last value written to the + Command/Parameter Register was valid or not. If the + Command Complete bit is set in the Interrupt Register, + then the Command Invalid bit in the Status Register will + be reset if the Operation Code or Parameter was valid + and the command has completed, or set if the Operation + Code or Parameter was invalid. If the Data In Register + Ready bit is set in the Status Register, then the + Operation Code was valid, and data is waiting to be read + back from the Host Adapter. Otherwise, wait for the + Command/Parameter Register Busy bit in the Status + Register to be reset. + */ + udelay(100); + intreg.all = blogic_rdint(adapter); + statusreg.all = blogic_rdstatus(adapter); + if (intreg.ir.cmd_complete) + break; + if (adapter->adapter_cmd_complete) + break; + if (statusreg.sr.datain_ready) + break; + if (statusreg.sr.cmd_param_busy) + continue; + blogic_setcmdparam(adapter, *param_p++); + paramlen--; + } + if (timeout < 0) { + blogic_cmd_failure_reason = + "Timeout waiting for Parameter Acceptance"; + result = -2; + goto done; + } + /* + The Modify I/O Address command does not cause a Command Complete + Interrupt. + */ + if (opcode == BLOGIC_MOD_IOADDR) { + statusreg.all = blogic_rdstatus(adapter); + if (statusreg.sr.cmd_invalid) { + blogic_cmd_failure_reason = + "Modify I/O Address Invalid"; + result = -1; + goto done; + } + if (blogic_global_options.trace_config) + blogic_notice("blogic_cmd(%02X) Status = %02X: (Modify I/O Address)\n", adapter, opcode, statusreg.all); + result = 0; + goto done; + } + /* + Select an appropriate timeout value for awaiting command completion. + */ + switch (opcode) { + case BLOGIC_INQ_DEV0TO7: + case BLOGIC_INQ_DEV8TO15: + case BLOGIC_INQ_DEV: + /* Approximately 60 seconds. */ + timeout = 60 * 10000; + break; + default: + /* Approximately 1 second. */ + timeout = 10000; + break; + } + /* + Receive any Reply Bytes, waiting for either the Command + Complete bit to be set in the Interrupt Register, or for the + Interrupt Handler to set the Host Adapter Command Completed + bit in the Host Adapter structure. + */ + while (--timeout >= 0) { + intreg.all = blogic_rdint(adapter); + statusreg.all = blogic_rdstatus(adapter); + if (intreg.ir.cmd_complete) + break; + if (adapter->adapter_cmd_complete) + break; + if (statusreg.sr.datain_ready) { + if (++reply_b <= replylen) + *reply_p++ = blogic_rddatain(adapter); + else + blogic_rddatain(adapter); + } + if (opcode == BLOGIC_FETCH_LOCALRAM && + statusreg.sr.adapter_ready) + break; + udelay(100); + } + if (timeout < 0) { + blogic_cmd_failure_reason = + "Timeout waiting for Command Complete"; + result = -2; + goto done; + } + /* + Clear any pending Command Complete Interrupt. + */ + blogic_intreset(adapter); + /* + Provide tracing information if requested. + */ + if (blogic_global_options.trace_config) { + int i; + blogic_notice("blogic_cmd(%02X) Status = %02X: %2d ==> %2d:", + adapter, opcode, statusreg.all, replylen, + reply_b); + if (replylen > reply_b) + replylen = reply_b; + for (i = 0; i < replylen; i++) + blogic_notice(" %02X", adapter, + ((unsigned char *) reply)[i]); + blogic_notice("\n", adapter); + } + /* + Process Command Invalid conditions. + */ + if (statusreg.sr.cmd_invalid) { + /* + Some early BusLogic Host Adapters may not recover + properly from a Command Invalid condition, so if this + appears to be the case, a Soft Reset is issued to the + Host Adapter. Potentially invalid commands are never + attempted after Mailbox Initialization is performed, + so there should be no Host Adapter state lost by a + Soft Reset in response to a Command Invalid condition. + */ + udelay(1000); + statusreg.all = blogic_rdstatus(adapter); + if (statusreg.sr.cmd_invalid || statusreg.sr.rsvd || + statusreg.sr.datain_ready || + statusreg.sr.cmd_param_busy || + !statusreg.sr.adapter_ready || + !statusreg.sr.init_reqd || + statusreg.sr.diag_active || + statusreg.sr.diag_failed) { + blogic_softreset(adapter); + udelay(1000); + } + blogic_cmd_failure_reason = "Command Invalid"; + result = -1; + goto done; + } + /* + Handle Excess Parameters Supplied conditions. + */ + if (paramlen > 0) { + blogic_cmd_failure_reason = "Excess Parameters Supplied"; + result = -1; + goto done; + } + /* + Indicate the command completed successfully. + */ + blogic_cmd_failure_reason = NULL; + result = reply_b; + /* + Restore the interrupt status if necessary and return. + */ +done: + if (!adapter->irq_acquired) + local_irq_restore(processor_flag); + return result; +} + + +/* + blogic_sort_probeinfo sorts a section of blogic_probeinfo_list in order + of increasing PCI Bus and Device Number. +*/ + +static void __init blogic_sort_probeinfo(struct blogic_probeinfo + *probeinfo_list, int probeinfo_cnt) +{ + int last_exchange = probeinfo_cnt - 1, bound, j; + + while (last_exchange > 0) { + bound = last_exchange; + last_exchange = 0; + for (j = 0; j < bound; j++) { + struct blogic_probeinfo *probeinfo1 = + &probeinfo_list[j]; + struct blogic_probeinfo *probeinfo2 = + &probeinfo_list[j + 1]; + if (probeinfo1->bus > probeinfo2->bus || + (probeinfo1->bus == probeinfo2->bus && + (probeinfo1->dev > probeinfo2->dev))) { + struct blogic_probeinfo tmp_probeinfo; + + memcpy(&tmp_probeinfo, probeinfo1, + sizeof(struct blogic_probeinfo)); + memcpy(probeinfo1, probeinfo2, + sizeof(struct blogic_probeinfo)); + memcpy(probeinfo2, &tmp_probeinfo, + sizeof(struct blogic_probeinfo)); + last_exchange = j; + } + } + } +} + + +/* + blogic_init_mm_probeinfo initializes the list of I/O Address + and Bus Probe Information to be checked for potential BusLogic MultiMaster + SCSI Host Adapters by interrogating the PCI Configuration Space on PCI + machines as well as from the list of standard BusLogic MultiMaster ISA + I/O Addresses. It returns the number of PCI MultiMaster Host Adapters found. +*/ + +static int __init blogic_init_mm_probeinfo(struct blogic_adapter *adapter) +{ + struct blogic_probeinfo *pr_probeinfo = + &blogic_probeinfo_list[blogic_probeinfo_count]; + int nonpr_mmindex = blogic_probeinfo_count + 1; + int nonpr_mmcount = 0, mmcount = 0; + bool force_scan_order = false; + bool force_scan_order_checked = false; + struct pci_dev *pci_device = NULL; + int i; + if (blogic_probeinfo_count >= BLOGIC_MAX_ADAPTERS) + return 0; + blogic_probeinfo_count++; + /* + Iterate over the MultiMaster PCI Host Adapters. For each + enumerated host adapter, determine whether its ISA Compatible + I/O Port is enabled and if so, whether it is assigned the + Primary I/O Address. A host adapter that is assigned the + Primary I/O Address will always be the preferred boot device. + The MultiMaster BIOS will first recognize a host adapter at + the Primary I/O Address, then any other PCI host adapters, + and finally any host adapters located at the remaining + standard ISA I/O Addresses. When a PCI host adapter is found + with its ISA Compatible I/O Port enabled, a command is issued + to disable the ISA Compatible I/O Port, and it is noted that the + particular standard ISA I/O Address need not be probed. + */ + pr_probeinfo->io_addr = 0; + while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, + PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, + pci_device)) != NULL) { + struct blogic_adapter *host_adapter = adapter; + struct blogic_adapter_info adapter_info; + enum blogic_isa_ioport mod_ioaddr_req; + unsigned char bus; + unsigned char device; + unsigned int irq_ch; + unsigned long base_addr0; + unsigned long base_addr1; + unsigned long io_addr; + unsigned long pci_addr; + + if (pci_enable_device(pci_device)) + continue; + + if (dma_set_mask(&pci_device->dev, DMA_BIT_MASK(32))) + continue; + + bus = pci_device->bus->number; + device = pci_device->devfn >> 3; + irq_ch = pci_device->irq; + io_addr = base_addr0 = pci_resource_start(pci_device, 0); + pci_addr = base_addr1 = pci_resource_start(pci_device, 1); + + if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) { + blogic_err("BusLogic: Base Address0 0x%lX not I/O for MultiMaster Host Adapter\n", NULL, base_addr0); + blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr); + continue; + } + if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) { + blogic_err("BusLogic: Base Address1 0x%lX not Memory for MultiMaster Host Adapter\n", NULL, base_addr1); + blogic_err("at PCI Bus %d Device %d PCI Address 0x%lX\n", NULL, bus, device, pci_addr); + continue; + } + if (irq_ch == 0) { + blogic_err("BusLogic: IRQ Channel %d invalid for MultiMaster Host Adapter\n", NULL, irq_ch); + blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr); + continue; + } + if (blogic_global_options.trace_probe) { + blogic_notice("BusLogic: PCI MultiMaster Host Adapter detected at\n", NULL); + blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr); + } + /* + Issue the Inquire PCI Host Adapter Information command to determine + the ISA Compatible I/O Port. If the ISA Compatible I/O Port is + known and enabled, note that the particular Standard ISA I/O + Address should not be probed. + */ + host_adapter->io_addr = io_addr; + blogic_intreset(host_adapter); + if (blogic_cmd(host_adapter, BLOGIC_INQ_PCI_INFO, NULL, 0, + &adapter_info, sizeof(adapter_info)) != + sizeof(adapter_info)) + adapter_info.isa_port = BLOGIC_IO_DISABLE; + /* + Issue the Modify I/O Address command to disable the + ISA Compatible I/O Port. On PCI Host Adapters, the + Modify I/O Address command allows modification of the + ISA compatible I/O Address that the Host Adapter + responds to; it does not affect the PCI compliant + I/O Address assigned at system initialization. + */ + mod_ioaddr_req = BLOGIC_IO_DISABLE; + blogic_cmd(host_adapter, BLOGIC_MOD_IOADDR, &mod_ioaddr_req, + sizeof(mod_ioaddr_req), NULL, 0); + /* + For the first MultiMaster Host Adapter enumerated, + issue the Fetch Host Adapter Local RAM command to read + byte 45 of the AutoSCSI area, for the setting of the + "Use Bus And Device # For PCI Scanning Seq." option. + Issue the Inquire Board ID command since this option is + only valid for the BT-948/958/958D. + */ + if (!force_scan_order_checked) { + struct blogic_fetch_localram fetch_localram; + struct blogic_autoscsi_byte45 autoscsi_byte45; + struct blogic_board_id id; + + fetch_localram.offset = BLOGIC_AUTOSCSI_BASE + 45; + fetch_localram.count = sizeof(autoscsi_byte45); + blogic_cmd(host_adapter, BLOGIC_FETCH_LOCALRAM, + &fetch_localram, sizeof(fetch_localram), + &autoscsi_byte45, + sizeof(autoscsi_byte45)); + blogic_cmd(host_adapter, BLOGIC_GET_BOARD_ID, NULL, 0, + &id, sizeof(id)); + if (id.fw_ver_digit1 == '5') + force_scan_order = + autoscsi_byte45.force_scan_order; + force_scan_order_checked = true; + } + /* + Determine whether this MultiMaster Host Adapter has its + ISA Compatible I/O Port enabled and is assigned the + Primary I/O Address. If it does, then it is the Primary + MultiMaster Host Adapter and must be recognized first. + If it does not, then it is added to the list for probing + after any Primary MultiMaster Host Adapter is probed. + */ + if (adapter_info.isa_port == BLOGIC_IO_330) { + pr_probeinfo->adapter_type = BLOGIC_MULTIMASTER; + pr_probeinfo->adapter_bus_type = BLOGIC_PCI_BUS; + pr_probeinfo->io_addr = io_addr; + pr_probeinfo->pci_addr = pci_addr; + pr_probeinfo->bus = bus; + pr_probeinfo->dev = device; + pr_probeinfo->irq_ch = irq_ch; + pr_probeinfo->pci_device = pci_dev_get(pci_device); + mmcount++; + } else if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) { + struct blogic_probeinfo *probeinfo = + &blogic_probeinfo_list[blogic_probeinfo_count++]; + probeinfo->adapter_type = BLOGIC_MULTIMASTER; + probeinfo->adapter_bus_type = BLOGIC_PCI_BUS; + probeinfo->io_addr = io_addr; + probeinfo->pci_addr = pci_addr; + probeinfo->bus = bus; + probeinfo->dev = device; + probeinfo->irq_ch = irq_ch; + probeinfo->pci_device = pci_dev_get(pci_device); + nonpr_mmcount++; + mmcount++; + } else + blogic_warn("BusLogic: Too many Host Adapters detected\n", NULL); + } + /* + If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." + option is ON for the first enumerated MultiMaster Host Adapter, + and if that host adapter is a BT-948/958/958D, then the + MultiMaster BIOS will recognize MultiMaster Host Adapters in + the order of increasing PCI Bus and Device Number. In that case, + sort the probe information into the same order the BIOS uses. + If this option is OFF, then the MultiMaster BIOS will recognize + MultiMaster Host Adapters in the order they are enumerated by + the PCI BIOS, and hence no sorting is necessary. + */ + if (force_scan_order) + blogic_sort_probeinfo(&blogic_probeinfo_list[nonpr_mmindex], + nonpr_mmcount); + /* + Iterate over the older non-compliant MultiMaster PCI Host Adapters, + noting the PCI bus location and assigned IRQ Channel. + */ + pci_device = NULL; + while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, + PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, + pci_device)) != NULL) { + unsigned char bus; + unsigned char device; + unsigned int irq_ch; + unsigned long io_addr; + + if (pci_enable_device(pci_device)) + continue; + + if (dma_set_mask(&pci_device->dev, DMA_BIT_MASK(32))) + continue; + + bus = pci_device->bus->number; + device = pci_device->devfn >> 3; + irq_ch = pci_device->irq; + io_addr = pci_resource_start(pci_device, 0); + + if (io_addr == 0 || irq_ch == 0) + continue; + for (i = 0; i < blogic_probeinfo_count; i++) { + struct blogic_probeinfo *probeinfo = + &blogic_probeinfo_list[i]; + if (probeinfo->io_addr == io_addr && + probeinfo->adapter_type == BLOGIC_MULTIMASTER) { + probeinfo->adapter_bus_type = BLOGIC_PCI_BUS; + probeinfo->pci_addr = 0; + probeinfo->bus = bus; + probeinfo->dev = device; + probeinfo->irq_ch = irq_ch; + probeinfo->pci_device = pci_dev_get(pci_device); + break; + } + } + } + return mmcount; +} + + +/* + blogic_init_fp_probeinfo initializes the list of I/O Address + and Bus Probe Information to be checked for potential BusLogic FlashPoint + Host Adapters by interrogating the PCI Configuration Space. It returns the + number of FlashPoint Host Adapters found. +*/ + +static int __init blogic_init_fp_probeinfo(struct blogic_adapter *adapter) +{ + int fpindex = blogic_probeinfo_count, fpcount = 0; + struct pci_dev *pci_device = NULL; + /* + Interrogate PCI Configuration Space for any FlashPoint Host Adapters. + */ + while ((pci_device = pci_get_device(PCI_VENDOR_ID_BUSLOGIC, + PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, + pci_device)) != NULL) { + unsigned char bus; + unsigned char device; + unsigned int irq_ch; + unsigned long base_addr0; + unsigned long base_addr1; + unsigned long io_addr; + unsigned long pci_addr; + + if (pci_enable_device(pci_device)) + continue; + + if (dma_set_mask(&pci_device->dev, DMA_BIT_MASK(32))) + continue; + + bus = pci_device->bus->number; + device = pci_device->devfn >> 3; + irq_ch = pci_device->irq; + io_addr = base_addr0 = pci_resource_start(pci_device, 0); + pci_addr = base_addr1 = pci_resource_start(pci_device, 1); +#ifdef CONFIG_SCSI_FLASHPOINT + if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) { + blogic_err("BusLogic: Base Address0 0x%lX not I/O for FlashPoint Host Adapter\n", NULL, base_addr0); + blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr); + continue; + } + if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) { + blogic_err("BusLogic: Base Address1 0x%lX not Memory for FlashPoint Host Adapter\n", NULL, base_addr1); + blogic_err("at PCI Bus %d Device %d PCI Address 0x%lX\n", NULL, bus, device, pci_addr); + continue; + } + if (irq_ch == 0) { + blogic_err("BusLogic: IRQ Channel %d invalid for FlashPoint Host Adapter\n", NULL, irq_ch); + blogic_err("at PCI Bus %d Device %d I/O Address 0x%lX\n", NULL, bus, device, io_addr); + continue; + } + if (blogic_global_options.trace_probe) { + blogic_notice("BusLogic: FlashPoint Host Adapter detected at\n", NULL); + blogic_notice("BusLogic: PCI Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr); + } + if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) { + struct blogic_probeinfo *probeinfo = + &blogic_probeinfo_list[blogic_probeinfo_count++]; + probeinfo->adapter_type = BLOGIC_FLASHPOINT; + probeinfo->adapter_bus_type = BLOGIC_PCI_BUS; + probeinfo->io_addr = io_addr; + probeinfo->pci_addr = pci_addr; + probeinfo->bus = bus; + probeinfo->dev = device; + probeinfo->irq_ch = irq_ch; + probeinfo->pci_device = pci_dev_get(pci_device); + fpcount++; + } else + blogic_warn("BusLogic: Too many Host Adapters detected\n", NULL); +#else + blogic_err("BusLogic: FlashPoint Host Adapter detected at PCI Bus %d Device %d\n", NULL, bus, device); + blogic_err("BusLogic: I/O Address 0x%lX PCI Address 0x%lX, irq %d, but FlashPoint\n", NULL, io_addr, pci_addr, irq_ch); + blogic_err("BusLogic: support was omitted in this kernel configuration.\n", NULL); +#endif + } + /* + The FlashPoint BIOS will scan for FlashPoint Host Adapters in the order of + increasing PCI Bus and Device Number, so sort the probe information into + the same order the BIOS uses. + */ + blogic_sort_probeinfo(&blogic_probeinfo_list[fpindex], fpcount); + return fpcount; +} + + +/* + blogic_init_probeinfo_list initializes the list of I/O Address and Bus + Probe Information to be checked for potential BusLogic SCSI Host Adapters by + interrogating the PCI Configuration Space on PCI machines as well as from the + list of standard BusLogic MultiMaster ISA I/O Addresses. By default, if both + FlashPoint and PCI MultiMaster Host Adapters are present, this driver will + probe for FlashPoint Host Adapters first unless the BIOS primary disk is + controlled by the first PCI MultiMaster Host Adapter, in which case + MultiMaster Host Adapters will be probed first. The BusLogic Driver Options + specifications "MultiMasterFirst" and "FlashPointFirst" can be used to force + a particular probe order. +*/ + +static void __init blogic_init_probeinfo_list(struct blogic_adapter *adapter) +{ + /* + If a PCI BIOS is present, interrogate it for MultiMaster and + FlashPoint Host Adapters; otherwise, default to the standard + ISA MultiMaster probe. + */ + if (!blogic_probe_options.noprobe_pci) { + if (blogic_probe_options.multimaster_first) { + blogic_init_mm_probeinfo(adapter); + blogic_init_fp_probeinfo(adapter); + } else if (blogic_probe_options.flashpoint_first) { + blogic_init_fp_probeinfo(adapter); + blogic_init_mm_probeinfo(adapter); + } else { + int fpcount = blogic_init_fp_probeinfo(adapter); + int mmcount = blogic_init_mm_probeinfo(adapter); + if (fpcount > 0 && mmcount > 0) { + struct blogic_probeinfo *probeinfo = + &blogic_probeinfo_list[fpcount]; + struct blogic_adapter *myadapter = adapter; + struct blogic_fetch_localram fetch_localram; + struct blogic_bios_drvmap d0_mapbyte; + + while (probeinfo->adapter_bus_type != + BLOGIC_PCI_BUS) + probeinfo++; + myadapter->io_addr = probeinfo->io_addr; + fetch_localram.offset = + BLOGIC_BIOS_BASE + BLOGIC_BIOS_DRVMAP; + fetch_localram.count = sizeof(d0_mapbyte); + blogic_cmd(myadapter, BLOGIC_FETCH_LOCALRAM, + &fetch_localram, + sizeof(fetch_localram), + &d0_mapbyte, + sizeof(d0_mapbyte)); + /* + If the Map Byte for BIOS Drive 0 indicates + that BIOS Drive 0 is controlled by this + PCI MultiMaster Host Adapter, then reverse + the probe order so that MultiMaster Host + Adapters are probed before FlashPoint Host + Adapters. + */ + if (d0_mapbyte.diskgeom != BLOGIC_BIOS_NODISK) { + struct blogic_probeinfo saved_probeinfo[BLOGIC_MAX_ADAPTERS]; + int mmcount = blogic_probeinfo_count - fpcount; + + memcpy(saved_probeinfo, + blogic_probeinfo_list, + blogic_probeinfo_count * sizeof(struct blogic_probeinfo)); + memcpy(&blogic_probeinfo_list[0], + &saved_probeinfo[fpcount], + mmcount * sizeof(struct blogic_probeinfo)); + memcpy(&blogic_probeinfo_list[mmcount], + &saved_probeinfo[0], + fpcount * sizeof(struct blogic_probeinfo)); + } + } + } + } +} + + +/* + blogic_failure prints a standardized error message, and then returns false. +*/ + +static bool blogic_failure(struct blogic_adapter *adapter, char *msg) +{ + blogic_announce_drvr(adapter); + if (adapter->adapter_bus_type == BLOGIC_PCI_BUS) { + blogic_err("While configuring BusLogic PCI Host Adapter at\n", + adapter); + blogic_err("Bus %d Device %d I/O Address 0x%lX PCI Address 0x%lX:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr, adapter->pci_addr); + } else + blogic_err("While configuring BusLogic Host Adapter at I/O Address 0x%lX:\n", adapter, adapter->io_addr); + blogic_err("%s FAILED - DETACHING\n", adapter, msg); + if (blogic_cmd_failure_reason != NULL) + blogic_err("ADDITIONAL FAILURE INFO - %s\n", adapter, + blogic_cmd_failure_reason); + return false; +} + + +/* + blogic_probe probes for a BusLogic Host Adapter. +*/ + +static bool __init blogic_probe(struct blogic_adapter *adapter) +{ + union blogic_stat_reg statusreg; + union blogic_int_reg intreg; + union blogic_geo_reg georeg; + /* + FlashPoint Host Adapters are Probed by the FlashPoint SCCB Manager. + */ + if (blogic_flashpoint_type(adapter)) { + struct fpoint_info *fpinfo = &adapter->fpinfo; + fpinfo->base_addr = (u32) adapter->io_addr; + fpinfo->irq_ch = adapter->irq_ch; + fpinfo->present = false; + if (!(FlashPoint_ProbeHostAdapter(fpinfo) == 0 && + fpinfo->present)) { + blogic_err("BusLogic: FlashPoint Host Adapter detected at PCI Bus %d Device %d\n", adapter, adapter->bus, adapter->dev); + blogic_err("BusLogic: I/O Address 0x%lX PCI Address 0x%lX, but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr); + blogic_err("BusLogic: Probe Function failed to validate it.\n", adapter); + return false; + } + if (blogic_global_options.trace_probe) + blogic_notice("BusLogic_Probe(0x%lX): FlashPoint Found\n", adapter, adapter->io_addr); + /* + Indicate the Host Adapter Probe completed successfully. + */ + return true; + } + /* + Read the Status, Interrupt, and Geometry Registers to test if there are I/O + ports that respond, and to check the values to determine if they are from a + BusLogic Host Adapter. A nonexistent I/O port will return 0xFF, in which + case there is definitely no BusLogic Host Adapter at this base I/O Address. + The test here is a subset of that used by the BusLogic Host Adapter BIOS. + */ + statusreg.all = blogic_rdstatus(adapter); + intreg.all = blogic_rdint(adapter); + georeg.all = blogic_rdgeom(adapter); + if (blogic_global_options.trace_probe) + blogic_notice("BusLogic_Probe(0x%lX): Status 0x%02X, Interrupt 0x%02X, Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all, intreg.all, georeg.all); + if (statusreg.all == 0 || statusreg.sr.diag_active || + statusreg.sr.cmd_param_busy || statusreg.sr.rsvd || + statusreg.sr.cmd_invalid || intreg.ir.rsvd != 0) + return false; + /* + Check the undocumented Geometry Register to test if there is + an I/O port that responded. Adaptec Host Adapters do not + implement the Geometry Register, so this test helps serve to + avoid incorrectly recognizing an Adaptec 1542A or 1542B as a + BusLogic. Unfortunately, the Adaptec 1542C series does respond + to the Geometry Register I/O port, but it will be rejected + later when the Inquire Extended Setup Information command is + issued in blogic_checkadapter. The AMI FastDisk Host Adapter + is a BusLogic clone that implements the same interface as + earlier BusLogic Host Adapters, including the undocumented + commands, and is therefore supported by this driver. However, + the AMI FastDisk always returns 0x00 upon reading the Geometry + Register, so the extended translation option should always be + left disabled on the AMI FastDisk. + */ + if (georeg.all == 0xFF) + return false; + /* + Indicate the Host Adapter Probe completed successfully. + */ + return true; +} + + +/* + blogic_hwreset issues a Hardware Reset to the Host Adapter + and waits for Host Adapter Diagnostics to complete. If hard_reset is true, a + Hard Reset is performed which also initiates a SCSI Bus Reset. Otherwise, a + Soft Reset is performed which only resets the Host Adapter without forcing a + SCSI Bus Reset. +*/ + +static bool blogic_hwreset(struct blogic_adapter *adapter, bool hard_reset) +{ + union blogic_stat_reg statusreg; + int timeout; + /* + FlashPoint Host Adapters are Hard Reset by the FlashPoint + SCCB Manager. + */ + if (blogic_flashpoint_type(adapter)) { + struct fpoint_info *fpinfo = &adapter->fpinfo; + fpinfo->softreset = !hard_reset; + fpinfo->report_underrun = true; + adapter->cardhandle = + FlashPoint_HardwareResetHostAdapter(fpinfo); + if (adapter->cardhandle == (void *)FPOINT_BADCARD_HANDLE) + return false; + /* + Indicate the Host Adapter Hard Reset completed successfully. + */ + return true; + } + /* + Issue a Hard Reset or Soft Reset Command to the Host Adapter. + The Host Adapter should respond by setting Diagnostic Active in + the Status Register. + */ + if (hard_reset) + blogic_hardreset(adapter); + else + blogic_softreset(adapter); + /* + Wait until Diagnostic Active is set in the Status Register. + */ + timeout = 5 * 10000; + while (--timeout >= 0) { + statusreg.all = blogic_rdstatus(adapter); + if (statusreg.sr.diag_active) + break; + udelay(100); + } + if (blogic_global_options.trace_hw_reset) + blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic Active, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all); + if (timeout < 0) + return false; + /* + Wait 100 microseconds to allow completion of any initial diagnostic + activity which might leave the contents of the Status Register + unpredictable. + */ + udelay(100); + /* + Wait until Diagnostic Active is reset in the Status Register. + */ + timeout = 10 * 10000; + while (--timeout >= 0) { + statusreg.all = blogic_rdstatus(adapter); + if (!statusreg.sr.diag_active) + break; + udelay(100); + } + if (blogic_global_options.trace_hw_reset) + blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic Completed, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all); + if (timeout < 0) + return false; + /* + Wait until at least one of the Diagnostic Failure, Host Adapter + Ready, or Data In Register Ready bits is set in the Status Register. + */ + timeout = 10000; + while (--timeout >= 0) { + statusreg.all = blogic_rdstatus(adapter); + if (statusreg.sr.diag_failed || statusreg.sr.adapter_ready || + statusreg.sr.datain_ready) + break; + udelay(100); + } + if (blogic_global_options.trace_hw_reset) + blogic_notice("BusLogic_HardwareReset(0x%lX): Host Adapter Ready, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all); + if (timeout < 0) + return false; + /* + If Diagnostic Failure is set or Host Adapter Ready is reset, + then an error occurred during the Host Adapter diagnostics. + If Data In Register Ready is set, then there is an Error Code + available. + */ + if (statusreg.sr.diag_failed || !statusreg.sr.adapter_ready) { + blogic_cmd_failure_reason = NULL; + blogic_failure(adapter, "HARD RESET DIAGNOSTICS"); + blogic_err("HOST ADAPTER STATUS REGISTER = %02X\n", adapter, + statusreg.all); + if (statusreg.sr.datain_ready) + blogic_err("HOST ADAPTER ERROR CODE = %d\n", adapter, + blogic_rddatain(adapter)); + return false; + } + /* + Indicate the Host Adapter Hard Reset completed successfully. + */ + return true; +} + + +/* + blogic_checkadapter checks to be sure this really is a BusLogic + Host Adapter. +*/ + +static bool __init blogic_checkadapter(struct blogic_adapter *adapter) +{ + struct blogic_ext_setup ext_setupinfo; + unsigned char req_replylen; + bool result = true; + /* + FlashPoint Host Adapters do not require this protection. + */ + if (blogic_flashpoint_type(adapter)) + return true; + /* + Issue the Inquire Extended Setup Information command. Only genuine + BusLogic Host Adapters and true clones support this command. + Adaptec 1542C series Host Adapters that respond to the Geometry + Register I/O port will fail this command. + */ + req_replylen = sizeof(ext_setupinfo); + if (blogic_cmd(adapter, BLOGIC_INQ_EXTSETUP, &req_replylen, + sizeof(req_replylen), &ext_setupinfo, + sizeof(ext_setupinfo)) != sizeof(ext_setupinfo)) + result = false; + /* + Provide tracing information if requested and return. + */ + if (blogic_global_options.trace_probe) + blogic_notice("BusLogic_Check(0x%lX): MultiMaster %s\n", adapter, + adapter->io_addr, + (result ? "Found" : "Not Found")); + return result; +} + + +/* + blogic_rdconfig reads the Configuration Information + from Host Adapter and initializes the Host Adapter structure. +*/ + +static bool __init blogic_rdconfig(struct blogic_adapter *adapter) +{ + struct blogic_board_id id; + struct blogic_config config; + struct blogic_setup_info setupinfo; + struct blogic_ext_setup ext_setupinfo; + unsigned char model[5]; + unsigned char fw_ver_digit3; + unsigned char fw_ver_letter; + struct blogic_adapter_info adapter_info; + struct blogic_fetch_localram fetch_localram; + struct blogic_autoscsi autoscsi; + union blogic_geo_reg georeg; + unsigned char req_replylen; + unsigned char *tgt, ch; + int tgt_id, i; + /* + Configuration Information for FlashPoint Host Adapters is + provided in the fpoint_info structure by the FlashPoint + SCCB Manager's Probe Function. Initialize fields in the + Host Adapter structure from the fpoint_info structure. + */ + if (blogic_flashpoint_type(adapter)) { + struct fpoint_info *fpinfo = &adapter->fpinfo; + tgt = adapter->model; + *tgt++ = 'B'; + *tgt++ = 'T'; + *tgt++ = '-'; + for (i = 0; i < sizeof(fpinfo->model); i++) + *tgt++ = fpinfo->model[i]; + *tgt++ = '\0'; + strcpy(adapter->fw_ver, FLASHPOINT_FW_VER); + adapter->scsi_id = fpinfo->scsi_id; + adapter->ext_trans_enable = fpinfo->ext_trans_enable; + adapter->parity = fpinfo->parity; + adapter->reset_enabled = !fpinfo->softreset; + adapter->level_int = true; + adapter->wide = fpinfo->wide; + adapter->differential = false; + adapter->scam = true; + adapter->ultra = true; + adapter->ext_lun = true; + adapter->terminfo_valid = true; + adapter->low_term = fpinfo->low_term; + adapter->high_term = fpinfo->high_term; + adapter->scam_enabled = fpinfo->scam_enabled; + adapter->scam_lev2 = fpinfo->scam_lev2; + adapter->drvr_sglimit = BLOGIC_SG_LIMIT; + adapter->maxdev = (adapter->wide ? 16 : 8); + adapter->maxlun = 32; + adapter->initccbs = 4 * BLOGIC_CCB_GRP_ALLOCSIZE; + adapter->inc_ccbs = BLOGIC_CCB_GRP_ALLOCSIZE; + adapter->drvr_qdepth = 255; + adapter->adapter_qdepth = adapter->drvr_qdepth; + adapter->sync_ok = fpinfo->sync_ok; + adapter->fast_ok = fpinfo->fast_ok; + adapter->ultra_ok = fpinfo->ultra_ok; + adapter->wide_ok = fpinfo->wide_ok; + adapter->discon_ok = fpinfo->discon_ok; + adapter->tagq_ok = 0xFFFF; + goto common; + } + /* + Issue the Inquire Board ID command. + */ + if (blogic_cmd(adapter, BLOGIC_GET_BOARD_ID, NULL, 0, &id, + sizeof(id)) != sizeof(id)) + return blogic_failure(adapter, "INQUIRE BOARD ID"); + /* + Issue the Inquire Configuration command. + */ + if (blogic_cmd(adapter, BLOGIC_INQ_CONFIG, NULL, 0, &config, + sizeof(config)) + != sizeof(config)) + return blogic_failure(adapter, "INQUIRE CONFIGURATION"); + /* + Issue the Inquire Setup Information command. + */ + req_replylen = sizeof(setupinfo); + if (blogic_cmd(adapter, BLOGIC_INQ_SETUPINFO, &req_replylen, + sizeof(req_replylen), &setupinfo, + sizeof(setupinfo)) != sizeof(setupinfo)) + return blogic_failure(adapter, "INQUIRE SETUP INFORMATION"); + /* + Issue the Inquire Extended Setup Information command. + */ + req_replylen = sizeof(ext_setupinfo); + if (blogic_cmd(adapter, BLOGIC_INQ_EXTSETUP, &req_replylen, + sizeof(req_replylen), &ext_setupinfo, + sizeof(ext_setupinfo)) != sizeof(ext_setupinfo)) + return blogic_failure(adapter, + "INQUIRE EXTENDED SETUP INFORMATION"); + /* + Issue the Inquire Firmware Version 3rd Digit command. + */ + fw_ver_digit3 = '\0'; + if (id.fw_ver_digit1 > '0') + if (blogic_cmd(adapter, BLOGIC_INQ_FWVER_D3, NULL, 0, + &fw_ver_digit3, + sizeof(fw_ver_digit3)) != sizeof(fw_ver_digit3)) + return blogic_failure(adapter, + "INQUIRE FIRMWARE 3RD DIGIT"); + /* + Issue the Inquire Host Adapter Model Number command. + */ + if (ext_setupinfo.bus_type == 'A' && id.fw_ver_digit1 == '2') + /* BusLogic BT-542B ISA 2.xx */ + strcpy(model, "542B"); + else if (ext_setupinfo.bus_type == 'E' && id.fw_ver_digit1 == '2' && + (id.fw_ver_digit2 <= '1' || (id.fw_ver_digit2 == '2' && + fw_ver_digit3 == '0'))) + /* BusLogic BT-742A EISA 2.1x or 2.20 */ + strcpy(model, "742A"); + else if (ext_setupinfo.bus_type == 'E' && id.fw_ver_digit1 == '0') + /* AMI FastDisk EISA Series 441 0.x */ + strcpy(model, "747A"); + else { + req_replylen = sizeof(model); + if (blogic_cmd(adapter, BLOGIC_INQ_MODELNO, &req_replylen, + sizeof(req_replylen), &model, + sizeof(model)) != sizeof(model)) + return blogic_failure(adapter, + "INQUIRE HOST ADAPTER MODEL NUMBER"); + } + /* + BusLogic MultiMaster Host Adapters can be identified by their + model number and the major version number of their firmware + as follows: + + 5.xx BusLogic "W" Series Host Adapters: + BT-948/958/958D + 4.xx BusLogic "C" Series Host Adapters: + BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF + 3.xx BusLogic "S" Series Host Adapters: + BT-747S/747D/757S/757D/445S/545S/542D + BT-542B/742A (revision H) + 2.xx BusLogic "A" Series Host Adapters: + BT-542B/742A (revision G and below) + 0.xx AMI FastDisk VLB/EISA BusLogic Clone Host Adapter + */ + /* + Save the Model Name and Host Adapter Name in the Host Adapter + structure. + */ + tgt = adapter->model; + *tgt++ = 'B'; + *tgt++ = 'T'; + *tgt++ = '-'; + for (i = 0; i < sizeof(model); i++) { + ch = model[i]; + if (ch == ' ' || ch == '\0') + break; + *tgt++ = ch; + } + *tgt++ = '\0'; + /* + Save the Firmware Version in the Host Adapter structure. + */ + tgt = adapter->fw_ver; + *tgt++ = id.fw_ver_digit1; + *tgt++ = '.'; + *tgt++ = id.fw_ver_digit2; + if (fw_ver_digit3 != ' ' && fw_ver_digit3 != '\0') + *tgt++ = fw_ver_digit3; + *tgt = '\0'; + /* + Issue the Inquire Firmware Version Letter command. + */ + if (strcmp(adapter->fw_ver, "3.3") >= 0) { + if (blogic_cmd(adapter, BLOGIC_INQ_FWVER_LETTER, NULL, 0, + &fw_ver_letter, + sizeof(fw_ver_letter)) != sizeof(fw_ver_letter)) + return blogic_failure(adapter, + "INQUIRE FIRMWARE VERSION LETTER"); + if (fw_ver_letter != ' ' && fw_ver_letter != '\0') + *tgt++ = fw_ver_letter; + *tgt = '\0'; + } + /* + Save the Host Adapter SCSI ID in the Host Adapter structure. + */ + adapter->scsi_id = config.id; + /* + Determine the Bus Type and save it in the Host Adapter structure, + determine and save the IRQ Channel if necessary, and determine + and save the DMA Channel for ISA Host Adapters. + */ + adapter->adapter_bus_type = + blogic_adater_bus_types[adapter->model[3] - '4']; + if (adapter->irq_ch == 0) { + if (config.irq_ch9) + adapter->irq_ch = 9; + else if (config.irq_ch10) + adapter->irq_ch = 10; + else if (config.irq_ch11) + adapter->irq_ch = 11; + else if (config.irq_ch12) + adapter->irq_ch = 12; + else if (config.irq_ch14) + adapter->irq_ch = 14; + else if (config.irq_ch15) + adapter->irq_ch = 15; + } + /* + Determine whether Extended Translation is enabled and save it in + the Host Adapter structure. + */ + georeg.all = blogic_rdgeom(adapter); + adapter->ext_trans_enable = georeg.gr.ext_trans_enable; + /* + Save the Scatter Gather Limits, Level Sensitive Interrupt flag, Wide + SCSI flag, Differential SCSI flag, SCAM Supported flag, and + Ultra SCSI flag in the Host Adapter structure. + */ + adapter->adapter_sglimit = ext_setupinfo.sg_limit; + adapter->drvr_sglimit = adapter->adapter_sglimit; + if (adapter->adapter_sglimit > BLOGIC_SG_LIMIT) + adapter->drvr_sglimit = BLOGIC_SG_LIMIT; + if (ext_setupinfo.misc.level_int) + adapter->level_int = true; + adapter->wide = ext_setupinfo.wide; + adapter->differential = ext_setupinfo.differential; + adapter->scam = ext_setupinfo.scam; + adapter->ultra = ext_setupinfo.ultra; + /* + Determine whether Extended LUN Format CCBs are supported and save the + information in the Host Adapter structure. + */ + if (adapter->fw_ver[0] == '5' || (adapter->fw_ver[0] == '4' && + adapter->wide)) + adapter->ext_lun = true; + /* + Issue the Inquire PCI Host Adapter Information command to read the + Termination Information from "W" series MultiMaster Host Adapters. + */ + if (adapter->fw_ver[0] == '5') { + if (blogic_cmd(adapter, BLOGIC_INQ_PCI_INFO, NULL, 0, + &adapter_info, + sizeof(adapter_info)) != sizeof(adapter_info)) + return blogic_failure(adapter, + "INQUIRE PCI HOST ADAPTER INFORMATION"); + /* + Save the Termination Information in the Host Adapter + structure. + */ + if (adapter_info.genericinfo_valid) { + adapter->terminfo_valid = true; + adapter->low_term = adapter_info.low_term; + adapter->high_term = adapter_info.high_term; + } + } + /* + Issue the Fetch Host Adapter Local RAM command to read the + AutoSCSI data from "W" and "C" series MultiMaster Host Adapters. + */ + if (adapter->fw_ver[0] >= '4') { + fetch_localram.offset = BLOGIC_AUTOSCSI_BASE; + fetch_localram.count = sizeof(autoscsi); + if (blogic_cmd(adapter, BLOGIC_FETCH_LOCALRAM, &fetch_localram, + sizeof(fetch_localram), &autoscsi, + sizeof(autoscsi)) != sizeof(autoscsi)) + return blogic_failure(adapter, + "FETCH HOST ADAPTER LOCAL RAM"); + /* + Save the Parity Checking Enabled, Bus Reset Enabled, + and Termination Information in the Host Adapter structure. + */ + adapter->parity = autoscsi.parity; + adapter->reset_enabled = autoscsi.reset_enabled; + if (adapter->fw_ver[0] == '4') { + adapter->terminfo_valid = true; + adapter->low_term = autoscsi.low_term; + adapter->high_term = autoscsi.high_term; + } + /* + Save the Wide Permitted, Fast Permitted, Synchronous + Permitted, Disconnect Permitted, Ultra Permitted, and + SCAM Information in the Host Adapter structure. + */ + adapter->wide_ok = autoscsi.wide_ok; + adapter->fast_ok = autoscsi.fast_ok; + adapter->sync_ok = autoscsi.sync_ok; + adapter->discon_ok = autoscsi.discon_ok; + if (adapter->ultra) + adapter->ultra_ok = autoscsi.ultra_ok; + if (adapter->scam) { + adapter->scam_enabled = autoscsi.scam_enabled; + adapter->scam_lev2 = autoscsi.scam_lev2; + } + } + /* + Initialize fields in the Host Adapter structure for "S" and "A" + series MultiMaster Host Adapters. + */ + if (adapter->fw_ver[0] < '4') { + if (setupinfo.sync) { + adapter->sync_ok = 0xFF; + if (adapter->adapter_bus_type == BLOGIC_EISA_BUS) { + if (ext_setupinfo.misc.fast_on_eisa) + adapter->fast_ok = 0xFF; + if (strcmp(adapter->model, "BT-757") == 0) + adapter->wide_ok = 0xFF; + } + } + adapter->discon_ok = 0xFF; + adapter->parity = setupinfo.parity; + adapter->reset_enabled = true; + } + /* + Determine the maximum number of Target IDs and Logical Units + supported by this driver for Wide and Narrow Host Adapters. + */ + adapter->maxdev = (adapter->wide ? 16 : 8); + adapter->maxlun = (adapter->ext_lun ? 32 : 8); + /* + Select appropriate values for the Mailbox Count, Driver Queue Depth, + Initial CCBs, and Incremental CCBs variables based on whether + or not Strict Round Robin Mode is supported. If Strict Round + Robin Mode is supported, then there is no performance degradation + in using the maximum possible number of Outgoing and Incoming + Mailboxes and allowing the Tagged and Untagged Queue Depths to + determine the actual utilization. If Strict Round Robin Mode is + not supported, then the Host Adapter must scan all the Outgoing + Mailboxes whenever an Outgoing Mailbox entry is made, which can + cause a substantial performance penalty. The host adapters + actually have room to store the following number of CCBs + internally; that is, they can internally queue and manage this + many active commands on the SCSI bus simultaneously. Performance + measurements demonstrate that the Driver Queue Depth should be + set to the Mailbox Count, rather than the Host Adapter Queue + Depth (internal CCB capacity), as it is more efficient to have the + queued commands waiting in Outgoing Mailboxes if necessary than + to block the process in the higher levels of the SCSI Subsystem. + + 192 BT-948/958/958D + 100 BT-946C/956C/956CD/747C/757C/757CD/445C + 50 BT-545C/540CF + 30 BT-747S/747D/757S/757D/445S/545S/542D/542B/742A + */ + if (adapter->fw_ver[0] == '5') + adapter->adapter_qdepth = 192; + else if (adapter->fw_ver[0] == '4') + adapter->adapter_qdepth = 100; + else + adapter->adapter_qdepth = 30; + if (strcmp(adapter->fw_ver, "3.31") >= 0) { + adapter->strict_rr = true; + adapter->mbox_count = BLOGIC_MAX_MAILBOX; + } else { + adapter->strict_rr = false; + adapter->mbox_count = 32; + } + adapter->drvr_qdepth = adapter->mbox_count; + adapter->initccbs = 4 * BLOGIC_CCB_GRP_ALLOCSIZE; + adapter->inc_ccbs = BLOGIC_CCB_GRP_ALLOCSIZE; + /* + Tagged Queuing support is available and operates properly on + all "W" series MultiMaster Host Adapters, on "C" series + MultiMaster Host Adapters with firmware version 4.22 and above, + and on "S" series MultiMaster Host Adapters with firmware version + 3.35 and above. + */ + adapter->tagq_ok = 0; + switch (adapter->fw_ver[0]) { + case '5': + adapter->tagq_ok = 0xFFFF; + break; + case '4': + if (strcmp(adapter->fw_ver, "4.22") >= 0) + adapter->tagq_ok = 0xFFFF; + break; + case '3': + if (strcmp(adapter->fw_ver, "3.35") >= 0) + adapter->tagq_ok = 0xFFFF; + break; + } + /* + Determine the Host Adapter BIOS Address if the BIOS is enabled and + save it in the Host Adapter structure. The BIOS is disabled if the + bios_addr is 0. + */ + adapter->bios_addr = ext_setupinfo.bios_addr << 12; + /* + BusLogic BT-445S Host Adapters prior to board revision E have a + hardware bug whereby when the BIOS is enabled, transfers to/from + the same address range the BIOS occupies modulo 16MB are handled + incorrectly. Only properly functioning BT-445S Host Adapters + have firmware version 3.37. + */ + if (adapter->bios_addr > 0 && + strcmp(adapter->model, "BT-445S") == 0 && + strcmp(adapter->fw_ver, "3.37") < 0) + return blogic_failure(adapter, "Too old firmware"); + /* + Initialize parameters common to MultiMaster and FlashPoint + Host Adapters. + */ +common: + /* + Initialize the Host Adapter Full Model Name from the Model Name. + */ + strcpy(adapter->full_model, "BusLogic "); + strcat(adapter->full_model, adapter->model); + /* + Select an appropriate value for the Tagged Queue Depth either from a + BusLogic Driver Options specification, or based on whether this Host + Adapter requires that ISA Bounce Buffers be used. The Tagged Queue + Depth is left at 0 for automatic determination in + BusLogic_SelectQueueDepths. Initialize the Untagged Queue Depth. + */ + for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) { + unsigned char qdepth = 0; + if (adapter->drvr_opts != NULL && + adapter->drvr_opts->qdepth[tgt_id] > 0) + qdepth = adapter->drvr_opts->qdepth[tgt_id]; + adapter->qdepth[tgt_id] = qdepth; + } + adapter->untag_qdepth = BLOGIC_UNTAG_DEPTH; + if (adapter->drvr_opts != NULL) + adapter->common_qdepth = adapter->drvr_opts->common_qdepth; + if (adapter->common_qdepth > 0 && + adapter->common_qdepth < adapter->untag_qdepth) + adapter->untag_qdepth = adapter->common_qdepth; + /* + Tagged Queuing is only allowed if Disconnect/Reconnect is permitted. + Therefore, mask the Tagged Queuing Permitted Default bits with the + Disconnect/Reconnect Permitted bits. + */ + adapter->tagq_ok &= adapter->discon_ok; + /* + Combine the default Tagged Queuing Permitted bits with any + BusLogic Driver Options Tagged Queuing specification. + */ + if (adapter->drvr_opts != NULL) + adapter->tagq_ok = (adapter->drvr_opts->tagq_ok & + adapter->drvr_opts->tagq_ok_mask) | + (adapter->tagq_ok & ~adapter->drvr_opts->tagq_ok_mask); + + /* + Select an appropriate value for Bus Settle Time either from a + BusLogic Driver Options specification, or from + BLOGIC_BUS_SETTLE_TIME. + */ + if (adapter->drvr_opts != NULL && + adapter->drvr_opts->bus_settle_time > 0) + adapter->bus_settle_time = adapter->drvr_opts->bus_settle_time; + else + adapter->bus_settle_time = BLOGIC_BUS_SETTLE_TIME; + /* + Indicate reading the Host Adapter Configuration completed + successfully. + */ + return true; +} + + +/* + blogic_reportconfig reports the configuration of Host Adapter. +*/ + +static bool __init blogic_reportconfig(struct blogic_adapter *adapter) +{ + unsigned short alltgt_mask = (1 << adapter->maxdev) - 1; + unsigned short sync_ok, fast_ok; + unsigned short ultra_ok, wide_ok; + unsigned short discon_ok, tagq_ok; + bool common_syncneg, common_tagq_depth; + char syncstr[BLOGIC_MAXDEV + 1]; + char widestr[BLOGIC_MAXDEV + 1]; + char discon_str[BLOGIC_MAXDEV + 1]; + char tagq_str[BLOGIC_MAXDEV + 1]; + char *syncmsg = syncstr; + char *widemsg = widestr; + char *discon_msg = discon_str; + char *tagq_msg = tagq_str; + int tgt_id; + + blogic_info("Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n", adapter, adapter->model, blogic_adapter_busnames[adapter->adapter_bus_type], (adapter->wide ? " Wide" : ""), (adapter->differential ? " Differential" : ""), (adapter->ultra ? " Ultra" : "")); + blogic_info(" Firmware Version: %s, I/O Address: 0x%lX, IRQ Channel: %d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch, (adapter->level_int ? "Level" : "Edge")); + if (adapter->adapter_bus_type != BLOGIC_PCI_BUS) { + blogic_info(" DMA Channel: None, ", adapter); + if (adapter->bios_addr > 0) + blogic_info("BIOS Address: 0x%X, ", adapter, + adapter->bios_addr); + else + blogic_info("BIOS Address: None, ", adapter); + } else { + blogic_info(" PCI Bus: %d, Device: %d, Address: ", adapter, + adapter->bus, adapter->dev); + if (adapter->pci_addr > 0) + blogic_info("0x%lX, ", adapter, adapter->pci_addr); + else + blogic_info("Unassigned, ", adapter); + } + blogic_info("Host Adapter SCSI ID: %d\n", adapter, adapter->scsi_id); + blogic_info(" Parity Checking: %s, Extended Translation: %s\n", + adapter, (adapter->parity ? "Enabled" : "Disabled"), + (adapter->ext_trans_enable ? "Enabled" : "Disabled")); + alltgt_mask &= ~(1 << adapter->scsi_id); + sync_ok = adapter->sync_ok & alltgt_mask; + fast_ok = adapter->fast_ok & alltgt_mask; + ultra_ok = adapter->ultra_ok & alltgt_mask; + if ((blogic_multimaster_type(adapter) && + (adapter->fw_ver[0] >= '4' || + adapter->adapter_bus_type == BLOGIC_EISA_BUS)) || + blogic_flashpoint_type(adapter)) { + common_syncneg = false; + if (sync_ok == 0) { + syncmsg = "Disabled"; + common_syncneg = true; + } else if (sync_ok == alltgt_mask) { + if (fast_ok == 0) { + syncmsg = "Slow"; + common_syncneg = true; + } else if (fast_ok == alltgt_mask) { + if (ultra_ok == 0) { + syncmsg = "Fast"; + common_syncneg = true; + } else if (ultra_ok == alltgt_mask) { + syncmsg = "Ultra"; + common_syncneg = true; + } + } + } + if (!common_syncneg) { + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + syncstr[tgt_id] = ((!(sync_ok & (1 << tgt_id))) ? 'N' : (!(fast_ok & (1 << tgt_id)) ? 'S' : (!(ultra_ok & (1 << tgt_id)) ? 'F' : 'U'))); + syncstr[adapter->scsi_id] = '#'; + syncstr[adapter->maxdev] = '\0'; + } + } else + syncmsg = (sync_ok == 0 ? "Disabled" : "Enabled"); + wide_ok = adapter->wide_ok & alltgt_mask; + if (wide_ok == 0) + widemsg = "Disabled"; + else if (wide_ok == alltgt_mask) + widemsg = "Enabled"; + else { + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + widestr[tgt_id] = ((wide_ok & (1 << tgt_id)) ? 'Y' : 'N'); + widestr[adapter->scsi_id] = '#'; + widestr[adapter->maxdev] = '\0'; + } + discon_ok = adapter->discon_ok & alltgt_mask; + if (discon_ok == 0) + discon_msg = "Disabled"; + else if (discon_ok == alltgt_mask) + discon_msg = "Enabled"; + else { + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + discon_str[tgt_id] = ((discon_ok & (1 << tgt_id)) ? 'Y' : 'N'); + discon_str[adapter->scsi_id] = '#'; + discon_str[adapter->maxdev] = '\0'; + } + tagq_ok = adapter->tagq_ok & alltgt_mask; + if (tagq_ok == 0) + tagq_msg = "Disabled"; + else if (tagq_ok == alltgt_mask) + tagq_msg = "Enabled"; + else { + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + tagq_str[tgt_id] = ((tagq_ok & (1 << tgt_id)) ? 'Y' : 'N'); + tagq_str[adapter->scsi_id] = '#'; + tagq_str[adapter->maxdev] = '\0'; + } + blogic_info(" Synchronous Negotiation: %s, Wide Negotiation: %s\n", + adapter, syncmsg, widemsg); + blogic_info(" Disconnect/Reconnect: %s, Tagged Queuing: %s\n", adapter, + discon_msg, tagq_msg); + if (blogic_multimaster_type(adapter)) { + blogic_info(" Scatter/Gather Limit: %d of %d segments, Mailboxes: %d\n", adapter, adapter->drvr_sglimit, adapter->adapter_sglimit, adapter->mbox_count); + blogic_info(" Driver Queue Depth: %d, Host Adapter Queue Depth: %d\n", adapter, adapter->drvr_qdepth, adapter->adapter_qdepth); + } else + blogic_info(" Driver Queue Depth: %d, Scatter/Gather Limit: %d segments\n", adapter, adapter->drvr_qdepth, adapter->drvr_sglimit); + blogic_info(" Tagged Queue Depth: ", adapter); + common_tagq_depth = true; + for (tgt_id = 1; tgt_id < adapter->maxdev; tgt_id++) + if (adapter->qdepth[tgt_id] != adapter->qdepth[0]) { + common_tagq_depth = false; + break; + } + if (common_tagq_depth) { + if (adapter->qdepth[0] > 0) + blogic_info("%d", adapter, adapter->qdepth[0]); + else + blogic_info("Automatic", adapter); + } else + blogic_info("Individual", adapter); + blogic_info(", Untagged Queue Depth: %d\n", adapter, + adapter->untag_qdepth); + if (adapter->terminfo_valid) { + if (adapter->wide) + blogic_info(" SCSI Bus Termination: %s", adapter, + (adapter->low_term ? (adapter->high_term ? "Both Enabled" : "Low Enabled") : (adapter->high_term ? "High Enabled" : "Both Disabled"))); + else + blogic_info(" SCSI Bus Termination: %s", adapter, + (adapter->low_term ? "Enabled" : "Disabled")); + if (adapter->scam) + blogic_info(", SCAM: %s", adapter, + (adapter->scam_enabled ? (adapter->scam_lev2 ? "Enabled, Level 2" : "Enabled, Level 1") : "Disabled")); + blogic_info("\n", adapter); + } + /* + Indicate reporting the Host Adapter configuration completed + successfully. + */ + return true; +} + + +/* + blogic_getres acquires the system resources necessary to use + Host Adapter. +*/ + +static bool __init blogic_getres(struct blogic_adapter *adapter) +{ + if (adapter->irq_ch == 0) { + blogic_err("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n", + adapter); + return false; + } + /* + Acquire shared access to the IRQ Channel. + */ + if (request_irq(adapter->irq_ch, blogic_inthandler, IRQF_SHARED, + adapter->full_model, adapter) < 0) { + blogic_err("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n", + adapter, adapter->irq_ch); + return false; + } + adapter->irq_acquired = true; + /* + Indicate the System Resource Acquisition completed successfully, + */ + return true; +} + + +/* + blogic_relres releases any system resources previously acquired + by blogic_getres. +*/ + +static void blogic_relres(struct blogic_adapter *adapter) +{ + /* + Release shared access to the IRQ Channel. + */ + if (adapter->irq_acquired) + free_irq(adapter->irq_ch, adapter); + /* + Release any allocated memory structs not released elsewhere + */ + if (adapter->mbox_space) + dma_free_coherent(&adapter->pci_device->dev, adapter->mbox_sz, + adapter->mbox_space, adapter->mbox_space_handle); + pci_dev_put(adapter->pci_device); + adapter->mbox_space = NULL; + adapter->mbox_space_handle = 0; + adapter->mbox_sz = 0; +} + + +/* + blogic_initadapter initializes Host Adapter. This is the only + function called during SCSI Host Adapter detection which modifies the state + of the Host Adapter from its initial power on or hard reset state. +*/ + +static bool blogic_initadapter(struct blogic_adapter *adapter) +{ + struct blogic_extmbox_req extmbox_req; + enum blogic_rr_req rr_req; + enum blogic_setccb_fmt setccb_fmt; + int tgt_id; + + /* + Initialize the pointers to the first and last CCBs that are + queued for completion processing. + */ + adapter->firstccb = NULL; + adapter->lastccb = NULL; + + /* + Initialize the Bus Device Reset Pending CCB, Tagged Queuing Active, + Command Successful Flag, Active Commands, and Commands Since Reset + for each Target Device. + */ + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) { + adapter->bdr_pend[tgt_id] = NULL; + adapter->tgt_flags[tgt_id].tagq_active = false; + adapter->tgt_flags[tgt_id].cmd_good = false; + adapter->active_cmds[tgt_id] = 0; + adapter->cmds_since_rst[tgt_id] = 0; + } + + /* + FlashPoint Host Adapters do not use Outgoing and Incoming Mailboxes. + */ + if (blogic_flashpoint_type(adapter)) + goto done; + + /* + Initialize the Outgoing and Incoming Mailbox pointers. + */ + adapter->mbox_sz = adapter->mbox_count * (sizeof(struct blogic_outbox) + sizeof(struct blogic_inbox)); + adapter->mbox_space = dma_alloc_coherent(&adapter->pci_device->dev, + adapter->mbox_sz, &adapter->mbox_space_handle, + GFP_KERNEL); + if (adapter->mbox_space == NULL) + return blogic_failure(adapter, "MAILBOX ALLOCATION"); + adapter->first_outbox = (struct blogic_outbox *) adapter->mbox_space; + adapter->last_outbox = adapter->first_outbox + adapter->mbox_count - 1; + adapter->next_outbox = adapter->first_outbox; + adapter->first_inbox = (struct blogic_inbox *) (adapter->last_outbox + 1); + adapter->last_inbox = adapter->first_inbox + adapter->mbox_count - 1; + adapter->next_inbox = adapter->first_inbox; + + /* + Initialize the Outgoing and Incoming Mailbox structures. + */ + memset(adapter->first_outbox, 0, + adapter->mbox_count * sizeof(struct blogic_outbox)); + memset(adapter->first_inbox, 0, + adapter->mbox_count * sizeof(struct blogic_inbox)); + + /* + Initialize the Host Adapter's Pointer to the Outgoing/Incoming + Mailboxes. + */ + extmbox_req.mbox_count = adapter->mbox_count; + extmbox_req.base_mbox_addr = (u32) adapter->mbox_space_handle; + if (blogic_cmd(adapter, BLOGIC_INIT_EXT_MBOX, &extmbox_req, + sizeof(extmbox_req), NULL, 0) < 0) + return blogic_failure(adapter, "MAILBOX INITIALIZATION"); + /* + Enable Strict Round Robin Mode if supported by the Host Adapter. In + Strict Round Robin Mode, the Host Adapter only looks at the next + Outgoing Mailbox for each new command, rather than scanning + through all the Outgoing Mailboxes to find any that have new + commands in them. Strict Round Robin Mode is significantly more + efficient. + */ + if (adapter->strict_rr) { + rr_req = BLOGIC_STRICT_RR_MODE; + if (blogic_cmd(adapter, BLOGIC_STRICT_RR, &rr_req, + sizeof(rr_req), NULL, 0) < 0) + return blogic_failure(adapter, + "ENABLE STRICT ROUND ROBIN MODE"); + } + + /* + For Host Adapters that support Extended LUN Format CCBs, issue the + Set CCB Format command to allow 32 Logical Units per Target Device. + */ + if (adapter->ext_lun) { + setccb_fmt = BLOGIC_EXT_LUN_CCB; + if (blogic_cmd(adapter, BLOGIC_SETCCB_FMT, &setccb_fmt, + sizeof(setccb_fmt), NULL, 0) < 0) + return blogic_failure(adapter, "SET CCB FORMAT"); + } + + /* + Announce Successful Initialization. + */ +done: + if (!adapter->adapter_initd) { + blogic_info("*** %s Initialized Successfully ***\n", adapter, + adapter->full_model); + blogic_info("\n", adapter); + } else + blogic_warn("*** %s Initialized Successfully ***\n", adapter, + adapter->full_model); + adapter->adapter_initd = true; + + /* + Indicate the Host Adapter Initialization completed successfully. + */ + return true; +} + + +/* + blogic_inquiry inquires about the Target Devices accessible + through Host Adapter. +*/ + +static bool __init blogic_inquiry(struct blogic_adapter *adapter) +{ + u16 installed_devs; + u8 installed_devs0to7[8]; + struct blogic_setup_info setupinfo; + u8 sync_period[BLOGIC_MAXDEV]; + unsigned char req_replylen; + int tgt_id; + + /* + Wait a few seconds between the Host Adapter Hard Reset which + initiates a SCSI Bus Reset and issuing any SCSI Commands. Some + SCSI devices get confused if they receive SCSI Commands too soon + after a SCSI Bus Reset. + */ + blogic_delay(adapter->bus_settle_time); + /* + FlashPoint Host Adapters do not provide for Target Device Inquiry. + */ + if (blogic_flashpoint_type(adapter)) + return true; + /* + Inhibit the Target Device Inquiry if requested. + */ + if (adapter->drvr_opts != NULL && adapter->drvr_opts->stop_tgt_inquiry) + return true; + /* + Issue the Inquire Target Devices command for host adapters with + firmware version 4.25 or later, or the Inquire Installed Devices + ID 0 to 7 command for older host adapters. This is necessary to + force Synchronous Transfer Negotiation so that the Inquire Setup + Information and Inquire Synchronous Period commands will return + valid data. The Inquire Target Devices command is preferable to + Inquire Installed Devices ID 0 to 7 since it only probes Logical + Unit 0 of each Target Device. + */ + if (strcmp(adapter->fw_ver, "4.25") >= 0) { + + /* + Issue a Inquire Target Devices command. Inquire Target + Devices only tests Logical Unit 0 of each Target Device + unlike the Inquire Installed Devices commands which test + Logical Units 0 - 7. Two bytes are returned, where byte + 0 bit 0 set indicates that Target Device 0 exists, and so on. + */ + + if (blogic_cmd(adapter, BLOGIC_INQ_DEV, NULL, 0, + &installed_devs, sizeof(installed_devs)) + != sizeof(installed_devs)) + return blogic_failure(adapter, "INQUIRE TARGET DEVICES"); + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + adapter->tgt_flags[tgt_id].tgt_exists = + (installed_devs & (1 << tgt_id) ? true : false); + } else { + + /* + Issue an Inquire Installed Devices command. For each + Target Device, a byte is returned where bit 0 set + indicates that Logical Unit 0 * exists, bit 1 set + indicates that Logical Unit 1 exists, and so on. + */ + + if (blogic_cmd(adapter, BLOGIC_INQ_DEV0TO7, NULL, 0, + &installed_devs0to7, sizeof(installed_devs0to7)) + != sizeof(installed_devs0to7)) + return blogic_failure(adapter, + "INQUIRE INSTALLED DEVICES ID 0 TO 7"); + for (tgt_id = 0; tgt_id < 8; tgt_id++) + adapter->tgt_flags[tgt_id].tgt_exists = + installed_devs0to7[tgt_id] != 0; + } + /* + Issue the Inquire Setup Information command. + */ + req_replylen = sizeof(setupinfo); + if (blogic_cmd(adapter, BLOGIC_INQ_SETUPINFO, &req_replylen, + sizeof(req_replylen), &setupinfo, sizeof(setupinfo)) + != sizeof(setupinfo)) + return blogic_failure(adapter, "INQUIRE SETUP INFORMATION"); + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + adapter->sync_offset[tgt_id] = (tgt_id < 8 ? setupinfo.sync0to7[tgt_id].offset : setupinfo.sync8to15[tgt_id - 8].offset); + if (strcmp(adapter->fw_ver, "5.06L") >= 0) + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + adapter->tgt_flags[tgt_id].wide_active = (tgt_id < 8 ? (setupinfo.wide_tx_active0to7 & (1 << tgt_id) ? true : false) : (setupinfo.wide_tx_active8to15 & (1 << (tgt_id - 8)) ? true : false)); + /* + Issue the Inquire Synchronous Period command. + */ + if (adapter->fw_ver[0] >= '3') { + + /* Issue a Inquire Synchronous Period command. For each + Target Device, a byte is returned which represents the + Synchronous Transfer Period in units of 10 nanoseconds. + */ + + req_replylen = sizeof(sync_period); + if (blogic_cmd(adapter, BLOGIC_INQ_SYNC_PERIOD, &req_replylen, + sizeof(req_replylen), &sync_period, + sizeof(sync_period)) != sizeof(sync_period)) + return blogic_failure(adapter, + "INQUIRE SYNCHRONOUS PERIOD"); + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + adapter->sync_period[tgt_id] = sync_period[tgt_id]; + } else + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + if (setupinfo.sync0to7[tgt_id].offset > 0) + adapter->sync_period[tgt_id] = 20 + 5 * setupinfo.sync0to7[tgt_id].tx_period; + /* + Indicate the Target Device Inquiry completed successfully. + */ + return true; +} + +/* + blogic_inithoststruct initializes the fields in the SCSI Host + structure. The base, io_port, n_io_ports, irq, and dma_channel fields in the + SCSI Host structure are intentionally left uninitialized, as this driver + handles acquisition and release of these resources explicitly, as well as + ensuring exclusive access to the Host Adapter hardware and data structures + through explicit acquisition and release of the Host Adapter's Lock. +*/ + +static void __init blogic_inithoststruct(struct blogic_adapter *adapter, + struct Scsi_Host *host) +{ + host->max_id = adapter->maxdev; + host->max_lun = adapter->maxlun; + host->max_channel = 0; + host->unique_id = adapter->io_addr; + host->this_id = adapter->scsi_id; + host->can_queue = adapter->drvr_qdepth; + host->sg_tablesize = adapter->drvr_sglimit; + host->cmd_per_lun = adapter->untag_qdepth; +} + +/* + blogic_slaveconfig will actually set the queue depth on individual + scsi devices as they are permanently added to the device chain. We + shamelessly rip off the SelectQueueDepths code to make this work mostly + like it used to. Since we don't get called once at the end of the scan + but instead get called for each device, we have to do things a bit + differently. +*/ +static int blogic_slaveconfig(struct scsi_device *dev) +{ + struct blogic_adapter *adapter = + (struct blogic_adapter *) dev->host->hostdata; + int tgt_id = dev->id; + int qdepth = adapter->qdepth[tgt_id]; + + if (adapter->tgt_flags[tgt_id].tagq_ok && + (adapter->tagq_ok & (1 << tgt_id))) { + if (qdepth == 0) + qdepth = BLOGIC_MAX_AUTO_TAG_DEPTH; + adapter->qdepth[tgt_id] = qdepth; + scsi_change_queue_depth(dev, qdepth); + } else { + adapter->tagq_ok &= ~(1 << tgt_id); + qdepth = adapter->untag_qdepth; + adapter->qdepth[tgt_id] = qdepth; + scsi_change_queue_depth(dev, qdepth); + } + qdepth = 0; + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) + if (adapter->tgt_flags[tgt_id].tgt_exists) + qdepth += adapter->qdepth[tgt_id]; + if (qdepth > adapter->alloc_ccbs) + blogic_create_addlccbs(adapter, qdepth - adapter->alloc_ccbs, + false); + return 0; +} + +/* + blogic_init probes for BusLogic Host Adapters at the standard + I/O Addresses where they may be located, initializing, registering, and + reporting the configuration of each BusLogic Host Adapter it finds. It + returns the number of BusLogic Host Adapters successfully initialized and + registered. +*/ + +static int __init blogic_init(void) +{ + int adapter_count = 0, drvr_optindex = 0, probeindex; + struct blogic_adapter *adapter; + int ret = 0; + +#ifdef MODULE + if (BusLogic) + blogic_setup(BusLogic); +#endif + + if (blogic_probe_options.noprobe) + return -ENODEV; + blogic_probeinfo_list = + kcalloc(BLOGIC_MAX_ADAPTERS, sizeof(struct blogic_probeinfo), + GFP_KERNEL); + if (blogic_probeinfo_list == NULL) { + blogic_err("BusLogic: Unable to allocate Probe Info List\n", + NULL); + return -ENOMEM; + } + + adapter = kzalloc(sizeof(struct blogic_adapter), GFP_KERNEL); + if (adapter == NULL) { + kfree(blogic_probeinfo_list); + blogic_err("BusLogic: Unable to allocate Prototype Host Adapter\n", NULL); + return -ENOMEM; + } + +#ifdef MODULE + if (BusLogic != NULL) + blogic_setup(BusLogic); +#endif + blogic_init_probeinfo_list(adapter); + for (probeindex = 0; probeindex < blogic_probeinfo_count; probeindex++) { + struct blogic_probeinfo *probeinfo = + &blogic_probeinfo_list[probeindex]; + struct blogic_adapter *myadapter = adapter; + struct Scsi_Host *host; + + if (probeinfo->io_addr == 0) + continue; + memset(myadapter, 0, sizeof(struct blogic_adapter)); + myadapter->adapter_type = probeinfo->adapter_type; + myadapter->adapter_bus_type = probeinfo->adapter_bus_type; + myadapter->io_addr = probeinfo->io_addr; + myadapter->pci_addr = probeinfo->pci_addr; + myadapter->bus = probeinfo->bus; + myadapter->dev = probeinfo->dev; + myadapter->pci_device = probeinfo->pci_device; + myadapter->irq_ch = probeinfo->irq_ch; + myadapter->addr_count = + blogic_adapter_addr_count[myadapter->adapter_type]; + + /* + Make sure region is free prior to probing. + */ + if (!request_region(myadapter->io_addr, myadapter->addr_count, + "BusLogic")) + continue; + /* + Probe the Host Adapter. If unsuccessful, abort further + initialization. + */ + if (!blogic_probe(myadapter)) { + release_region(myadapter->io_addr, + myadapter->addr_count); + continue; + } + /* + Hard Reset the Host Adapter. If unsuccessful, abort further + initialization. + */ + if (!blogic_hwreset(myadapter, true)) { + release_region(myadapter->io_addr, + myadapter->addr_count); + continue; + } + /* + Check the Host Adapter. If unsuccessful, abort further + initialization. + */ + if (!blogic_checkadapter(myadapter)) { + release_region(myadapter->io_addr, + myadapter->addr_count); + continue; + } + /* + Initialize the Driver Options field if provided. + */ + if (drvr_optindex < blogic_drvr_options_count) + myadapter->drvr_opts = + &blogic_drvr_options[drvr_optindex++]; + /* + Announce the Driver Version and Date, Author's Name, + Copyright Notice, and Electronic Mail Address. + */ + blogic_announce_drvr(myadapter); + /* + Register the SCSI Host structure. + */ + + host = scsi_host_alloc(&blogic_template, + sizeof(struct blogic_adapter)); + if (host == NULL) { + release_region(myadapter->io_addr, + myadapter->addr_count); + continue; + } + myadapter = (struct blogic_adapter *) host->hostdata; + memcpy(myadapter, adapter, sizeof(struct blogic_adapter)); + myadapter->scsi_host = host; + myadapter->host_no = host->host_no; + /* + Add Host Adapter to the end of the list of registered + BusLogic Host Adapters. + */ + list_add_tail(&myadapter->host_list, &blogic_host_list); + + /* + Read the Host Adapter Configuration, Configure the Host + Adapter, Acquire the System Resources necessary to use + the Host Adapter, then Create the Initial CCBs, Initialize + the Host Adapter, and finally perform Target Device + Inquiry. From this point onward, any failure will be + assumed to be due to a problem with the Host Adapter, + rather than due to having mistakenly identified this port + as belonging to a BusLogic Host Adapter. The I/O Address + range will not be released, thereby preventing it from + being incorrectly identified as any other type of Host + Adapter. + */ + if (blogic_rdconfig(myadapter) && + blogic_reportconfig(myadapter) && + blogic_getres(myadapter) && + blogic_create_initccbs(myadapter) && + blogic_initadapter(myadapter) && + blogic_inquiry(myadapter)) { + /* + Initialization has been completed successfully. + Release and re-register usage of the I/O Address + range so that the Model Name of the Host Adapter + will appear, and initialize the SCSI Host structure. + */ + release_region(myadapter->io_addr, + myadapter->addr_count); + if (!request_region(myadapter->io_addr, + myadapter->addr_count, + myadapter->full_model)) { + printk(KERN_WARNING + "BusLogic: Release and re-register of " + "port 0x%04lx failed \n", + (unsigned long)myadapter->io_addr); + blogic_destroy_ccbs(myadapter); + blogic_relres(myadapter); + list_del(&myadapter->host_list); + scsi_host_put(host); + ret = -ENOMEM; + } else { + blogic_inithoststruct(myadapter, + host); + if (scsi_add_host(host, myadapter->pci_device + ? &myadapter->pci_device->dev + : NULL)) { + printk(KERN_WARNING + "BusLogic: scsi_add_host()" + "failed!\n"); + blogic_destroy_ccbs(myadapter); + blogic_relres(myadapter); + list_del(&myadapter->host_list); + scsi_host_put(host); + ret = -ENODEV; + } else { + scsi_scan_host(host); + adapter_count++; + } + } + } else { + /* + An error occurred during Host Adapter Configuration + Querying, Host Adapter Configuration, Resource + Acquisition, CCB Creation, Host Adapter + Initialization, or Target Device Inquiry, so + remove Host Adapter from the list of registered + BusLogic Host Adapters, destroy the CCBs, Release + the System Resources, and Unregister the SCSI + Host. + */ + blogic_destroy_ccbs(myadapter); + blogic_relres(myadapter); + list_del(&myadapter->host_list); + scsi_host_put(host); + ret = -ENODEV; + } + } + kfree(adapter); + kfree(blogic_probeinfo_list); + blogic_probeinfo_list = NULL; + return ret; +} + + +/* + blogic_deladapter releases all resources previously acquired to + support a specific Host Adapter, including the I/O Address range, and + unregisters the BusLogic Host Adapter. +*/ + +static int __exit blogic_deladapter(struct blogic_adapter *adapter) +{ + struct Scsi_Host *host = adapter->scsi_host; + + scsi_remove_host(host); + + /* + FlashPoint Host Adapters must first be released by the FlashPoint + SCCB Manager. + */ + if (blogic_flashpoint_type(adapter)) + FlashPoint_ReleaseHostAdapter(adapter->cardhandle); + /* + Destroy the CCBs and release any system resources acquired to + support Host Adapter. + */ + blogic_destroy_ccbs(adapter); + blogic_relres(adapter); + /* + Release usage of the I/O Address range. + */ + release_region(adapter->io_addr, adapter->addr_count); + /* + Remove Host Adapter from the list of registered BusLogic + Host Adapters. + */ + list_del(&adapter->host_list); + + scsi_host_put(host); + return 0; +} + + +/* + blogic_qcompleted_ccb queues CCB for completion processing. +*/ + +static void blogic_qcompleted_ccb(struct blogic_ccb *ccb) +{ + struct blogic_adapter *adapter = ccb->adapter; + + ccb->status = BLOGIC_CCB_COMPLETE; + ccb->next = NULL; + if (adapter->firstccb == NULL) { + adapter->firstccb = ccb; + adapter->lastccb = ccb; + } else { + adapter->lastccb->next = ccb; + adapter->lastccb = ccb; + } + adapter->active_cmds[ccb->tgt_id]--; +} + + +/* + blogic_resultcode computes a SCSI Subsystem Result Code from + the Host Adapter Status and Target Device Status. +*/ + +static int blogic_resultcode(struct blogic_adapter *adapter, + enum blogic_adapter_status adapter_status, + enum blogic_tgt_status tgt_status) +{ + int hoststatus; + + switch (adapter_status) { + case BLOGIC_CMD_CMPLT_NORMAL: + case BLOGIC_LINK_CMD_CMPLT: + case BLOGIC_LINK_CMD_CMPLT_FLAG: + hoststatus = DID_OK; + break; + case BLOGIC_SELECT_TIMEOUT: + hoststatus = DID_TIME_OUT; + break; + case BLOGIC_INVALID_OUTBOX_CODE: + case BLOGIC_INVALID_CMD_CODE: + case BLOGIC_BAD_CMD_PARAM: + blogic_warn("BusLogic Driver Protocol Error 0x%02X\n", + adapter, adapter_status); + fallthrough; + case BLOGIC_DATA_UNDERRUN: + case BLOGIC_DATA_OVERRUN: + case BLOGIC_NOEXPECT_BUSFREE: + case BLOGIC_LINKCCB_BADLUN: + case BLOGIC_AUTOREQSENSE_FAIL: + case BLOGIC_TAGQUEUE_REJECT: + case BLOGIC_BAD_MSG_RCVD: + case BLOGIC_HW_FAIL: + case BLOGIC_BAD_RECONNECT: + case BLOGIC_ABRT_QUEUE: + case BLOGIC_ADAPTER_SW_ERROR: + case BLOGIC_HW_TIMEOUT: + case BLOGIC_PARITY_ERR: + hoststatus = DID_ERROR; + break; + case BLOGIC_INVALID_BUSPHASE: + case BLOGIC_NORESPONSE_TO_ATN: + case BLOGIC_HW_RESET: + case BLOGIC_RST_FROM_OTHERDEV: + case BLOGIC_HW_BDR: + hoststatus = DID_RESET; + break; + default: + blogic_warn("Unknown Host Adapter Status 0x%02X\n", adapter, + adapter_status); + hoststatus = DID_ERROR; + break; + } + return (hoststatus << 16) | tgt_status; +} + +/* + * turn the dma address from an inbox into a ccb pointer + * This is rather inefficient. + */ +static struct blogic_ccb * +blogic_inbox_to_ccb(struct blogic_adapter *adapter, struct blogic_inbox *inbox) +{ + struct blogic_ccb *ccb; + + for (ccb = adapter->all_ccbs; ccb; ccb = ccb->next_all) + if (inbox->ccb == ccb->dma_handle) + break; + + return ccb; +} + +/* + blogic_scan_inbox scans the Incoming Mailboxes saving any + Incoming Mailbox entries for completion processing. +*/ +static void blogic_scan_inbox(struct blogic_adapter *adapter) +{ + /* + Scan through the Incoming Mailboxes in Strict Round Robin + fashion, saving any completed CCBs for further processing. It + is essential that for each CCB and SCSI Command issued, command + completion processing is performed exactly once. Therefore, + only Incoming Mailboxes with completion code Command Completed + Without Error, Command Completed With Error, or Command Aborted + At Host Request are saved for completion processing. When an + Incoming Mailbox has a completion code of Aborted Command Not + Found, the CCB had already completed or been aborted before the + current Abort request was processed, and so completion processing + has already occurred and no further action should be taken. + */ + struct blogic_inbox *next_inbox = adapter->next_inbox; + enum blogic_cmplt_code comp_code; + + while ((comp_code = next_inbox->comp_code) != BLOGIC_INBOX_FREE) { + struct blogic_ccb *ccb = blogic_inbox_to_ccb(adapter, next_inbox); + if (!ccb) { + /* + * This should never happen, unless the CCB list is + * corrupted in memory. + */ + blogic_warn("Could not find CCB for dma address %x\n", adapter, next_inbox->ccb); + } else if (comp_code != BLOGIC_CMD_NOTFOUND) { + if (ccb->status == BLOGIC_CCB_ACTIVE || + ccb->status == BLOGIC_CCB_RESET) { + /* + Save the Completion Code for this CCB and + queue the CCB for completion processing. + */ + ccb->comp_code = comp_code; + blogic_qcompleted_ccb(ccb); + } else { + /* + If a CCB ever appears in an Incoming Mailbox + and is not marked as status Active or Reset, + then there is most likely a bug in + the Host Adapter firmware. + */ + blogic_warn("Illegal CCB #%ld status %d in Incoming Mailbox\n", adapter, ccb->serial, ccb->status); + } + } + next_inbox->comp_code = BLOGIC_INBOX_FREE; + if (++next_inbox > adapter->last_inbox) + next_inbox = adapter->first_inbox; + } + adapter->next_inbox = next_inbox; +} + + +/* + blogic_process_ccbs iterates over the completed CCBs for Host + Adapter setting the SCSI Command Result Codes, deallocating the CCBs, and + calling the SCSI Subsystem Completion Routines. The Host Adapter's Lock + should already have been acquired by the caller. +*/ + +static void blogic_process_ccbs(struct blogic_adapter *adapter) +{ + if (adapter->processing_ccbs) + return; + adapter->processing_ccbs = true; + while (adapter->firstccb != NULL) { + struct blogic_ccb *ccb = adapter->firstccb; + struct scsi_cmnd *command = ccb->command; + adapter->firstccb = ccb->next; + if (adapter->firstccb == NULL) + adapter->lastccb = NULL; + /* + Process the Completed CCB. + */ + if (ccb->opcode == BLOGIC_BDR) { + int tgt_id = ccb->tgt_id; + + blogic_warn("Bus Device Reset CCB #%ld to Target %d Completed\n", adapter, ccb->serial, tgt_id); + blogic_inc_count(&adapter->tgt_stats[tgt_id].bdr_done); + adapter->tgt_flags[tgt_id].tagq_active = false; + adapter->cmds_since_rst[tgt_id] = 0; + adapter->last_resetdone[tgt_id] = jiffies; + /* + Place CCB back on the Host Adapter's free list. + */ + blogic_dealloc_ccb(ccb, 1); +#if 0 /* this needs to be redone different for new EH */ + /* + Bus Device Reset CCBs have the command field + non-NULL only when a Bus Device Reset was requested + for a command that did not have a currently active + CCB in the Host Adapter (i.e., a Synchronous Bus + Device Reset), and hence would not have its + Completion Routine called otherwise. + */ + while (command != NULL) { + struct scsi_cmnd *nxt_cmd = + command->reset_chain; + command->reset_chain = NULL; + command->result = DID_RESET << 16; + scsi_done(command); + command = nxt_cmd; + } +#endif + /* + Iterate over the CCBs for this Host Adapter + performing completion processing for any CCBs + marked as Reset for this Target. + */ + for (ccb = adapter->all_ccbs; ccb != NULL; + ccb = ccb->next_all) + if (ccb->status == BLOGIC_CCB_RESET && + ccb->tgt_id == tgt_id) { + command = ccb->command; + blogic_dealloc_ccb(ccb, 1); + adapter->active_cmds[tgt_id]--; + command->result = DID_RESET << 16; + scsi_done(command); + } + adapter->bdr_pend[tgt_id] = NULL; + } else { + /* + Translate the Completion Code, Host Adapter Status, + and Target Device Status into a SCSI Subsystem + Result Code. + */ + switch (ccb->comp_code) { + case BLOGIC_INBOX_FREE: + case BLOGIC_CMD_NOTFOUND: + case BLOGIC_INVALID_CCB: + blogic_warn("CCB #%ld to Target %d Impossible State\n", adapter, ccb->serial, ccb->tgt_id); + break; + case BLOGIC_CMD_COMPLETE_GOOD: + adapter->tgt_stats[ccb->tgt_id] + .cmds_complete++; + adapter->tgt_flags[ccb->tgt_id] + .cmd_good = true; + command->result = DID_OK << 16; + break; + case BLOGIC_CMD_ABORT_BY_HOST: + blogic_warn("CCB #%ld to Target %d Aborted\n", + adapter, ccb->serial, ccb->tgt_id); + blogic_inc_count(&adapter->tgt_stats[ccb->tgt_id].aborts_done); + command->result = DID_ABORT << 16; + break; + case BLOGIC_CMD_COMPLETE_ERROR: + command->result = blogic_resultcode(adapter, + ccb->adapter_status, ccb->tgt_status); + if (ccb->adapter_status != BLOGIC_SELECT_TIMEOUT) { + adapter->tgt_stats[ccb->tgt_id] + .cmds_complete++; + if (blogic_global_options.trace_err) { + int i; + blogic_notice("CCB #%ld Target %d: Result %X Host " + "Adapter Status %02X Target Status %02X\n", adapter, ccb->serial, ccb->tgt_id, command->result, ccb->adapter_status, ccb->tgt_status); + blogic_notice("CDB ", adapter); + for (i = 0; i < ccb->cdblen; i++) + blogic_notice(" %02X", adapter, ccb->cdb[i]); + blogic_notice("\n", adapter); + blogic_notice("Sense ", adapter); + for (i = 0; i < ccb->sense_datalen; i++) + blogic_notice(" %02X", adapter, command->sense_buffer[i]); + blogic_notice("\n", adapter); + } + } + break; + } + /* + When an INQUIRY command completes normally, save the + CmdQue (Tagged Queuing Supported) and WBus16 (16 Bit + Wide Data Transfers Supported) bits. + */ + if (ccb->cdb[0] == INQUIRY && ccb->cdb[1] == 0 && + ccb->adapter_status == BLOGIC_CMD_CMPLT_NORMAL) { + struct blogic_tgt_flags *tgt_flags = + &adapter->tgt_flags[ccb->tgt_id]; + struct scsi_inquiry *inquiry = + (struct scsi_inquiry *) scsi_sglist(command); + tgt_flags->tgt_exists = true; + tgt_flags->tagq_ok = inquiry->CmdQue; + tgt_flags->wide_ok = inquiry->WBus16; + } + /* + Place CCB back on the Host Adapter's free list. + */ + blogic_dealloc_ccb(ccb, 1); + /* + Call the SCSI Command Completion Routine. + */ + scsi_done(command); + } + } + adapter->processing_ccbs = false; +} + + +/* + blogic_inthandler handles hardware interrupts from BusLogic Host + Adapters. +*/ + +static irqreturn_t blogic_inthandler(int irq_ch, void *devid) +{ + struct blogic_adapter *adapter = (struct blogic_adapter *) devid; + unsigned long processor_flag; + /* + Acquire exclusive access to Host Adapter. + */ + spin_lock_irqsave(adapter->scsi_host->host_lock, processor_flag); + /* + Handle Interrupts appropriately for each Host Adapter type. + */ + if (blogic_multimaster_type(adapter)) { + union blogic_int_reg intreg; + /* + Read the Host Adapter Interrupt Register. + */ + intreg.all = blogic_rdint(adapter); + if (intreg.ir.int_valid) { + /* + Acknowledge the interrupt and reset the Host Adapter + Interrupt Register. + */ + blogic_intreset(adapter); + /* + Process valid External SCSI Bus Reset and Incoming + Mailbox Loaded Interrupts. Command Complete + Interrupts are noted, and Outgoing Mailbox Available + Interrupts are ignored, as they are never enabled. + */ + if (intreg.ir.ext_busreset) + adapter->adapter_extreset = true; + else if (intreg.ir.mailin_loaded) + blogic_scan_inbox(adapter); + else if (intreg.ir.cmd_complete) + adapter->adapter_cmd_complete = true; + } + } else { + /* + Check if there is a pending interrupt for this Host Adapter. + */ + if (FlashPoint_InterruptPending(adapter->cardhandle)) + switch (FlashPoint_HandleInterrupt(adapter->cardhandle)) { + case FPOINT_NORMAL_INT: + break; + case FPOINT_EXT_RESET: + adapter->adapter_extreset = true; + break; + case FPOINT_INTERN_ERR: + blogic_warn("Internal FlashPoint Error detected - Resetting Host Adapter\n", adapter); + adapter->adapter_intern_err = true; + break; + } + } + /* + Process any completed CCBs. + */ + if (adapter->firstccb != NULL) + blogic_process_ccbs(adapter); + /* + Reset the Host Adapter if requested. + */ + if (adapter->adapter_extreset) { + blogic_warn("Resetting %s due to External SCSI Bus Reset\n", adapter, adapter->full_model); + blogic_inc_count(&adapter->ext_resets); + blogic_resetadapter(adapter, false); + adapter->adapter_extreset = false; + } else if (adapter->adapter_intern_err) { + blogic_warn("Resetting %s due to Host Adapter Internal Error\n", adapter, adapter->full_model); + blogic_inc_count(&adapter->adapter_intern_errors); + blogic_resetadapter(adapter, true); + adapter->adapter_intern_err = false; + } + /* + Release exclusive access to Host Adapter. + */ + spin_unlock_irqrestore(adapter->scsi_host->host_lock, processor_flag); + return IRQ_HANDLED; +} + + +/* + blogic_write_outbox places CCB and Action Code into an Outgoing + Mailbox for execution by Host Adapter. The Host Adapter's Lock should + already have been acquired by the caller. +*/ + +static bool blogic_write_outbox(struct blogic_adapter *adapter, + enum blogic_action action, struct blogic_ccb *ccb) +{ + struct blogic_outbox *next_outbox; + + next_outbox = adapter->next_outbox; + if (next_outbox->action == BLOGIC_OUTBOX_FREE) { + ccb->status = BLOGIC_CCB_ACTIVE; + /* + The CCB field must be written before the Action Code field + since the Host Adapter is operating asynchronously and the + locking code does not protect against simultaneous access + by the Host Adapter. + */ + next_outbox->ccb = ccb->dma_handle; + next_outbox->action = action; + blogic_execmbox(adapter); + if (++next_outbox > adapter->last_outbox) + next_outbox = adapter->first_outbox; + adapter->next_outbox = next_outbox; + if (action == BLOGIC_MBOX_START) { + adapter->active_cmds[ccb->tgt_id]++; + if (ccb->opcode != BLOGIC_BDR) + adapter->tgt_stats[ccb->tgt_id].cmds_tried++; + } + return true; + } + return false; +} + +/* Error Handling (EH) support */ + +static int blogic_hostreset(struct scsi_cmnd *SCpnt) +{ + struct blogic_adapter *adapter = + (struct blogic_adapter *) SCpnt->device->host->hostdata; + + unsigned int id = SCpnt->device->id; + struct blogic_tgt_stats *stats = &adapter->tgt_stats[id]; + int rc; + + spin_lock_irq(SCpnt->device->host->host_lock); + + blogic_inc_count(&stats->adapter_reset_req); + + rc = blogic_resetadapter(adapter, false); + spin_unlock_irq(SCpnt->device->host->host_lock); + return rc; +} + +/* + blogic_qcmd creates a CCB for Command and places it into an + Outgoing Mailbox for execution by the associated Host Adapter. +*/ + +static int blogic_qcmd_lck(struct scsi_cmnd *command) +{ + void (*comp_cb)(struct scsi_cmnd *) = scsi_done; + struct blogic_adapter *adapter = + (struct blogic_adapter *) command->device->host->hostdata; + struct blogic_tgt_flags *tgt_flags = + &adapter->tgt_flags[command->device->id]; + struct blogic_tgt_stats *tgt_stats = adapter->tgt_stats; + unsigned char *cdb = command->cmnd; + int cdblen = command->cmd_len; + int tgt_id = command->device->id; + int lun = command->device->lun; + int buflen = scsi_bufflen(command); + int count; + struct blogic_ccb *ccb; + dma_addr_t sense_buf; + + /* + SCSI REQUEST_SENSE commands will be executed automatically by the + Host Adapter for any errors, so they should not be executed + explicitly unless the Sense Data is zero indicating that no error + occurred. + */ + if (cdb[0] == REQUEST_SENSE && command->sense_buffer[0] != 0) { + command->result = DID_OK << 16; + comp_cb(command); + return 0; + } + /* + Allocate a CCB from the Host Adapter's free list. In the unlikely + event that there are none available and memory allocation fails, + wait 1 second and try again. If that fails, the Host Adapter is + probably hung so signal an error as a Host Adapter Hard Reset + should be initiated soon. + */ + ccb = blogic_alloc_ccb(adapter); + if (ccb == NULL) { + spin_unlock_irq(adapter->scsi_host->host_lock); + blogic_delay(1); + spin_lock_irq(adapter->scsi_host->host_lock); + ccb = blogic_alloc_ccb(adapter); + if (ccb == NULL) { + command->result = DID_ERROR << 16; + comp_cb(command); + return 0; + } + } + + /* + Initialize the fields in the BusLogic Command Control Block (CCB). + */ + count = scsi_dma_map(command); + BUG_ON(count < 0); + if (count) { + struct scatterlist *sg; + int i; + + ccb->opcode = BLOGIC_INITIATOR_CCB_SG; + ccb->datalen = count * sizeof(struct blogic_sg_seg); + if (blogic_multimaster_type(adapter)) + ccb->data = (unsigned int) ccb->dma_handle + + ((unsigned long) &ccb->sglist - + (unsigned long) ccb); + else + ccb->data = virt_to_32bit_virt(ccb->sglist); + + scsi_for_each_sg(command, sg, count, i) { + ccb->sglist[i].segbytes = sg_dma_len(sg); + ccb->sglist[i].segdata = sg_dma_address(sg); + } + } else if (!count) { + ccb->opcode = BLOGIC_INITIATOR_CCB; + ccb->datalen = buflen; + ccb->data = 0; + } + + switch (cdb[0]) { + case READ_6: + case READ_10: + ccb->datadir = BLOGIC_DATAIN_CHECKED; + tgt_stats[tgt_id].read_cmds++; + blogic_addcount(&tgt_stats[tgt_id].bytesread, buflen); + blogic_incszbucket(tgt_stats[tgt_id].read_sz_buckets, buflen); + break; + case WRITE_6: + case WRITE_10: + ccb->datadir = BLOGIC_DATAOUT_CHECKED; + tgt_stats[tgt_id].write_cmds++; + blogic_addcount(&tgt_stats[tgt_id].byteswritten, buflen); + blogic_incszbucket(tgt_stats[tgt_id].write_sz_buckets, buflen); + break; + default: + ccb->datadir = BLOGIC_UNCHECKED_TX; + break; + } + ccb->cdblen = cdblen; + ccb->adapter_status = 0; + ccb->tgt_status = 0; + ccb->tgt_id = tgt_id; + ccb->lun = lun; + ccb->tag_enable = false; + ccb->legacytag_enable = false; + /* + BusLogic recommends that after a Reset the first couple of + commands that are sent to a Target Device be sent in a non + Tagged Queue fashion so that the Host Adapter and Target Device + can establish Synchronous and Wide Transfer before Queue Tag + messages can interfere with the Synchronous and Wide Negotiation + messages. By waiting to enable Tagged Queuing until after the + first BLOGIC_MAX_TAG_DEPTH commands have been queued, it is + assured that after a Reset any pending commands are requeued + before Tagged Queuing is enabled and that the Tagged Queuing + message will not occur while the partition table is being printed. + In addition, some devices do not properly handle the transition + from non-tagged to tagged commands, so it is necessary to wait + until there are no pending commands for a target device + before queuing tagged commands. + */ + if (adapter->cmds_since_rst[tgt_id]++ >= BLOGIC_MAX_TAG_DEPTH && + !tgt_flags->tagq_active && + adapter->active_cmds[tgt_id] == 0 + && tgt_flags->tagq_ok && + (adapter->tagq_ok & (1 << tgt_id))) { + tgt_flags->tagq_active = true; + blogic_notice("Tagged Queuing now active for Target %d\n", + adapter, tgt_id); + } + if (tgt_flags->tagq_active) { + enum blogic_queuetag queuetag = BLOGIC_SIMPLETAG; + /* + When using Tagged Queuing with Simple Queue Tags, it + appears that disk drive controllers do not guarantee that + a queued command will not remain in a disconnected state + indefinitely if commands that read or write nearer the + head position continue to arrive without interruption. + Therefore, for each Target Device this driver keeps track + of the last time either the queue was empty or an Ordered + Queue Tag was issued. If more than 4 seconds (one fifth + of the 20 second disk timeout) have elapsed since this + last sequence point, this command will be issued with an + Ordered Queue Tag rather than a Simple Queue Tag, which + forces the Target Device to complete all previously + queued commands before this command may be executed. + */ + if (adapter->active_cmds[tgt_id] == 0) + adapter->last_seqpoint[tgt_id] = jiffies; + else if (time_after(jiffies, + adapter->last_seqpoint[tgt_id] + 4 * HZ)) { + adapter->last_seqpoint[tgt_id] = jiffies; + queuetag = BLOGIC_ORDEREDTAG; + } + if (adapter->ext_lun) { + ccb->tag_enable = true; + ccb->queuetag = queuetag; + } else { + ccb->legacytag_enable = true; + ccb->legacy_tag = queuetag; + } + } + memcpy(ccb->cdb, cdb, cdblen); + ccb->sense_datalen = SCSI_SENSE_BUFFERSIZE; + ccb->command = command; + sense_buf = dma_map_single(&adapter->pci_device->dev, + command->sense_buffer, ccb->sense_datalen, + DMA_FROM_DEVICE); + if (dma_mapping_error(&adapter->pci_device->dev, sense_buf)) { + blogic_err("DMA mapping for sense data buffer failed\n", + adapter); + blogic_dealloc_ccb(ccb, 0); + return SCSI_MLQUEUE_HOST_BUSY; + } + ccb->sensedata = sense_buf; + if (blogic_multimaster_type(adapter)) { + /* + Place the CCB in an Outgoing Mailbox. The higher levels + of the SCSI Subsystem should not attempt to queue more + commands than can be placed in Outgoing Mailboxes, so + there should always be one free. In the unlikely event + that there are none available, wait 1 second and try + again. If that fails, the Host Adapter is probably hung + so signal an error as a Host Adapter Hard Reset should + be initiated soon. + */ + if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START, ccb)) { + spin_unlock_irq(adapter->scsi_host->host_lock); + blogic_warn("Unable to write Outgoing Mailbox - Pausing for 1 second\n", adapter); + blogic_delay(1); + spin_lock_irq(adapter->scsi_host->host_lock); + if (!blogic_write_outbox(adapter, BLOGIC_MBOX_START, + ccb)) { + blogic_warn("Still unable to write Outgoing Mailbox - Host Adapter Dead?\n", adapter); + blogic_dealloc_ccb(ccb, 1); + command->result = DID_ERROR << 16; + scsi_done(command); + } + } + } else { + /* + Call the FlashPoint SCCB Manager to start execution of + the CCB. + */ + ccb->status = BLOGIC_CCB_ACTIVE; + adapter->active_cmds[tgt_id]++; + tgt_stats[tgt_id].cmds_tried++; + FlashPoint_StartCCB(adapter->cardhandle, ccb); + /* + The Command may have already completed and + blogic_qcompleted_ccb been called, or it may still be + pending. + */ + if (ccb->status == BLOGIC_CCB_COMPLETE) + blogic_process_ccbs(adapter); + } + return 0; +} + +static DEF_SCSI_QCMD(blogic_qcmd) + +#if 0 +/* + blogic_abort aborts Command if possible. +*/ + +static int blogic_abort(struct scsi_cmnd *command) +{ + struct blogic_adapter *adapter = + (struct blogic_adapter *) command->device->host->hostdata; + + int tgt_id = command->device->id; + struct blogic_ccb *ccb; + blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_request); + + /* + Attempt to find an Active CCB for this Command. If no Active + CCB for this Command is found, then no Abort is necessary. + */ + for (ccb = adapter->all_ccbs; ccb != NULL; ccb = ccb->next_all) + if (ccb->command == command) + break; + if (ccb == NULL) { + blogic_warn("Unable to Abort Command to Target %d - No CCB Found\n", adapter, tgt_id); + return SUCCESS; + } else if (ccb->status == BLOGIC_CCB_COMPLETE) { + blogic_warn("Unable to Abort Command to Target %d - CCB Completed\n", adapter, tgt_id); + return SUCCESS; + } else if (ccb->status == BLOGIC_CCB_RESET) { + blogic_warn("Unable to Abort Command to Target %d - CCB Reset\n", adapter, tgt_id); + return SUCCESS; + } + if (blogic_multimaster_type(adapter)) { + /* + Attempt to Abort this CCB. MultiMaster Firmware versions + prior to 5.xx do not generate Abort Tag messages, but only + generate the non-tagged Abort message. Since non-tagged + commands are not sent by the Host Adapter until the queue + of outstanding tagged commands has completed, and the + Abort message is treated as a non-tagged command, it is + effectively impossible to abort commands when Tagged + Queuing is active. Firmware version 5.xx does generate + Abort Tag messages, so it is possible to abort commands + when Tagged Queuing is active. + */ + if (adapter->tgt_flags[tgt_id].tagq_active && + adapter->fw_ver[0] < '5') { + blogic_warn("Unable to Abort CCB #%ld to Target %d - Abort Tag Not Supported\n", adapter, ccb->serial, tgt_id); + return FAILURE; + } else if (blogic_write_outbox(adapter, BLOGIC_MBOX_ABORT, + ccb)) { + blogic_warn("Aborting CCB #%ld to Target %d\n", + adapter, ccb->serial, tgt_id); + blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried); + return SUCCESS; + } else { + blogic_warn("Unable to Abort CCB #%ld to Target %d - No Outgoing Mailboxes\n", adapter, ccb->serial, tgt_id); + return FAILURE; + } + } else { + /* + Call the FlashPoint SCCB Manager to abort execution of + the CCB. + */ + blogic_warn("Aborting CCB #%ld to Target %d\n", adapter, + ccb->serial, tgt_id); + blogic_inc_count(&adapter->tgt_stats[tgt_id].aborts_tried); + FlashPoint_AbortCCB(adapter->cardhandle, ccb); + /* + The Abort may have already been completed and + blogic_qcompleted_ccb been called, or it + may still be pending. + */ + if (ccb->status == BLOGIC_CCB_COMPLETE) + blogic_process_ccbs(adapter); + return SUCCESS; + } + return SUCCESS; +} + +#endif +/* + blogic_resetadapter resets Host Adapter if possible, marking all + currently executing SCSI Commands as having been Reset. +*/ + +static int blogic_resetadapter(struct blogic_adapter *adapter, bool hard_reset) +{ + struct blogic_ccb *ccb; + int tgt_id; + + /* + * Attempt to Reset and Reinitialize the Host Adapter. + */ + + if (!(blogic_hwreset(adapter, hard_reset) && + blogic_initadapter(adapter))) { + blogic_err("Resetting %s Failed\n", adapter, + adapter->full_model); + return FAILURE; + } + + /* + * Deallocate all currently executing CCBs. + */ + + for (ccb = adapter->all_ccbs; ccb != NULL; ccb = ccb->next_all) + if (ccb->status == BLOGIC_CCB_ACTIVE) + blogic_dealloc_ccb(ccb, 1); + /* + * Wait a few seconds between the Host Adapter Hard Reset which + * initiates a SCSI Bus Reset and issuing any SCSI Commands. Some + * SCSI devices get confused if they receive SCSI Commands too soon + * after a SCSI Bus Reset. + */ + + if (hard_reset) { + spin_unlock_irq(adapter->scsi_host->host_lock); + blogic_delay(adapter->bus_settle_time); + spin_lock_irq(adapter->scsi_host->host_lock); + } + + for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++) { + adapter->last_resettried[tgt_id] = jiffies; + adapter->last_resetdone[tgt_id] = jiffies; + } + return SUCCESS; +} + +/* + blogic_diskparam returns the Heads/Sectors/Cylinders BIOS Disk + Parameters for Disk. The default disk geometry is 64 heads, 32 sectors, and + the appropriate number of cylinders so as not to exceed drive capacity. In + order for disks equal to or larger than 1 GB to be addressable by the BIOS + without exceeding the BIOS limitation of 1024 cylinders, Extended Translation + may be enabled in AutoSCSI on FlashPoint Host Adapters and on "W" and "C" + series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A" + series MultiMaster Host Adapters. With Extended Translation enabled, drives + between 1 GB inclusive and 2 GB exclusive are given a disk geometry of 128 + heads and 32 sectors, and drives above 2 GB inclusive are given a disk + geometry of 255 heads and 63 sectors. However, if the BIOS detects that the + Extended Translation setting does not match the geometry in the partition + table, then the translation inferred from the partition table will be used by + the BIOS, and a warning may be displayed. +*/ + +static int blogic_diskparam(struct scsi_device *sdev, struct block_device *dev, + sector_t capacity, int *params) +{ + struct blogic_adapter *adapter = + (struct blogic_adapter *) sdev->host->hostdata; + struct bios_diskparam *diskparam = (struct bios_diskparam *) params; + unsigned char *buf; + + if (adapter->ext_trans_enable && capacity >= 2 * 1024 * 1024 /* 1 GB in 512 byte sectors */) { + if (capacity >= 4 * 1024 * 1024 /* 2 GB in 512 byte sectors */) { + diskparam->heads = 255; + diskparam->sectors = 63; + } else { + diskparam->heads = 128; + diskparam->sectors = 32; + } + } else { + diskparam->heads = 64; + diskparam->sectors = 32; + } + diskparam->cylinders = (unsigned long) capacity / (diskparam->heads * diskparam->sectors); + buf = scsi_bios_ptable(dev); + if (buf == NULL) + return 0; + /* + If the boot sector partition table flag is valid, search for + a partition table entry whose end_head matches one of the + standard BusLogic geometry translations (64/32, 128/32, or 255/63). + */ + if (*(unsigned short *) (buf + 64) == MSDOS_LABEL_MAGIC) { + struct msdos_partition *part1_entry = + (struct msdos_partition *)buf; + struct msdos_partition *part_entry = part1_entry; + int saved_cyl = diskparam->cylinders, part_no; + unsigned char part_end_head = 0, part_end_sector = 0; + + for (part_no = 0; part_no < 4; part_no++) { + part_end_head = part_entry->end_head; + part_end_sector = part_entry->end_sector & 0x3F; + if (part_end_head == 64 - 1) { + diskparam->heads = 64; + diskparam->sectors = 32; + break; + } else if (part_end_head == 128 - 1) { + diskparam->heads = 128; + diskparam->sectors = 32; + break; + } else if (part_end_head == 255 - 1) { + diskparam->heads = 255; + diskparam->sectors = 63; + break; + } + part_entry++; + } + if (part_no == 4) { + part_end_head = part1_entry->end_head; + part_end_sector = part1_entry->end_sector & 0x3F; + } + diskparam->cylinders = (unsigned long) capacity / (diskparam->heads * diskparam->sectors); + if (part_no < 4 && part_end_sector == diskparam->sectors) { + if (diskparam->cylinders != saved_cyl) + blogic_warn("Adopting Geometry %d/%d from Partition Table\n", adapter, diskparam->heads, diskparam->sectors); + } else if (part_end_head > 0 || part_end_sector > 0) { + blogic_warn("Warning: Partition Table appears to have Geometry %d/%d which is\n", adapter, part_end_head + 1, part_end_sector); + blogic_warn("not compatible with current BusLogic Host Adapter Geometry %d/%d\n", adapter, diskparam->heads, diskparam->sectors); + } + } + kfree(buf); + return 0; +} + + +/* + BugLogic_ProcDirectoryInfo implements /proc/scsi/BusLogic/<N>. +*/ + +static int blogic_write_info(struct Scsi_Host *shost, char *procbuf, + int bytes_avail) +{ + struct blogic_adapter *adapter = + (struct blogic_adapter *) shost->hostdata; + struct blogic_tgt_stats *tgt_stats; + + tgt_stats = adapter->tgt_stats; + adapter->ext_resets = 0; + adapter->adapter_intern_errors = 0; + memset(tgt_stats, 0, BLOGIC_MAXDEV * sizeof(struct blogic_tgt_stats)); + return 0; +} + +static int blogic_show_info(struct seq_file *m, struct Scsi_Host *shost) +{ + struct blogic_adapter *adapter = (struct blogic_adapter *) shost->hostdata; + struct blogic_tgt_stats *tgt_stats; + int tgt; + + tgt_stats = adapter->tgt_stats; + seq_write(m, adapter->msgbuf, adapter->msgbuflen); + seq_printf(m, "\n\ +Current Driver Queue Depth: %d\n\ +Currently Allocated CCBs: %d\n", adapter->drvr_qdepth, adapter->alloc_ccbs); + seq_puts(m, "\n\n\ + DATA TRANSFER STATISTICS\n\ +\n\ +Target Tagged Queuing Queue Depth Active Attempted Completed\n\ +====== ============== =========== ====== ========= =========\n"); + for (tgt = 0; tgt < adapter->maxdev; tgt++) { + struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; + if (!tgt_flags->tgt_exists) + continue; + seq_printf(m, " %2d %s", tgt, (tgt_flags->tagq_ok ? (tgt_flags->tagq_active ? " Active" : (adapter->tagq_ok & (1 << tgt) + ? " Permitted" : " Disabled")) + : "Not Supported")); + seq_printf(m, + " %3d %3u %9u %9u\n", adapter->qdepth[tgt], adapter->active_cmds[tgt], tgt_stats[tgt].cmds_tried, tgt_stats[tgt].cmds_complete); + } + seq_puts(m, "\n\ +Target Read Commands Write Commands Total Bytes Read Total Bytes Written\n\ +====== ============= ============== =================== ===================\n"); + for (tgt = 0; tgt < adapter->maxdev; tgt++) { + struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; + if (!tgt_flags->tgt_exists) + continue; + seq_printf(m, " %2d %9u %9u", tgt, tgt_stats[tgt].read_cmds, tgt_stats[tgt].write_cmds); + if (tgt_stats[tgt].bytesread.billions > 0) + seq_printf(m, " %9u%09u", tgt_stats[tgt].bytesread.billions, tgt_stats[tgt].bytesread.units); + else + seq_printf(m, " %9u", tgt_stats[tgt].bytesread.units); + if (tgt_stats[tgt].byteswritten.billions > 0) + seq_printf(m, " %9u%09u\n", tgt_stats[tgt].byteswritten.billions, tgt_stats[tgt].byteswritten.units); + else + seq_printf(m, " %9u\n", tgt_stats[tgt].byteswritten.units); + } + seq_puts(m, "\n\ +Target Command 0-1KB 1-2KB 2-4KB 4-8KB 8-16KB\n\ +====== ======= ========= ========= ========= ========= =========\n"); + for (tgt = 0; tgt < adapter->maxdev; tgt++) { + struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; + if (!tgt_flags->tgt_exists) + continue; + seq_printf(m, + " %2d Read %9u %9u %9u %9u %9u\n", tgt, + tgt_stats[tgt].read_sz_buckets[0], + tgt_stats[tgt].read_sz_buckets[1], tgt_stats[tgt].read_sz_buckets[2], tgt_stats[tgt].read_sz_buckets[3], tgt_stats[tgt].read_sz_buckets[4]); + seq_printf(m, + " %2d Write %9u %9u %9u %9u %9u\n", tgt, + tgt_stats[tgt].write_sz_buckets[0], + tgt_stats[tgt].write_sz_buckets[1], tgt_stats[tgt].write_sz_buckets[2], tgt_stats[tgt].write_sz_buckets[3], tgt_stats[tgt].write_sz_buckets[4]); + } + seq_puts(m, "\n\ +Target Command 16-32KB 32-64KB 64-128KB 128-256KB 256KB+\n\ +====== ======= ========= ========= ========= ========= =========\n"); + for (tgt = 0; tgt < adapter->maxdev; tgt++) { + struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; + if (!tgt_flags->tgt_exists) + continue; + seq_printf(m, + " %2d Read %9u %9u %9u %9u %9u\n", tgt, + tgt_stats[tgt].read_sz_buckets[5], + tgt_stats[tgt].read_sz_buckets[6], tgt_stats[tgt].read_sz_buckets[7], tgt_stats[tgt].read_sz_buckets[8], tgt_stats[tgt].read_sz_buckets[9]); + seq_printf(m, + " %2d Write %9u %9u %9u %9u %9u\n", tgt, + tgt_stats[tgt].write_sz_buckets[5], + tgt_stats[tgt].write_sz_buckets[6], tgt_stats[tgt].write_sz_buckets[7], tgt_stats[tgt].write_sz_buckets[8], tgt_stats[tgt].write_sz_buckets[9]); + } + seq_puts(m, "\n\n\ + ERROR RECOVERY STATISTICS\n\ +\n\ + Command Aborts Bus Device Resets Host Adapter Resets\n\ +Target Requested Completed Requested Completed Requested Completed\n\ + ID \\\\\\\\ Attempted //// \\\\\\\\ Attempted //// \\\\\\\\ Attempted ////\n\ +====== ===== ===== ===== ===== ===== ===== ===== ===== =====\n"); + for (tgt = 0; tgt < adapter->maxdev; tgt++) { + struct blogic_tgt_flags *tgt_flags = &adapter->tgt_flags[tgt]; + if (!tgt_flags->tgt_exists) + continue; + seq_printf(m, " %2d %5d %5d %5d %5d %5d %5d %5d %5d %5d\n", + tgt, tgt_stats[tgt].aborts_request, + tgt_stats[tgt].aborts_tried, + tgt_stats[tgt].aborts_done, + tgt_stats[tgt].bdr_request, + tgt_stats[tgt].bdr_tried, + tgt_stats[tgt].bdr_done, + tgt_stats[tgt].adapter_reset_req, + tgt_stats[tgt].adapter_reset_attempt, + tgt_stats[tgt].adapter_reset_done); + } + seq_printf(m, "\nExternal Host Adapter Resets: %d\n", adapter->ext_resets); + seq_printf(m, "Host Adapter Internal Errors: %d\n", adapter->adapter_intern_errors); + return 0; +} + + +/* + blogic_msg prints Driver Messages. +*/ +__printf(2, 4) +static void blogic_msg(enum blogic_msglevel msglevel, char *fmt, + struct blogic_adapter *adapter, ...) +{ + static char buf[BLOGIC_LINEBUF_SIZE]; + static bool begin = true; + va_list args; + int len = 0; + + va_start(args, adapter); + len = vscnprintf(buf, sizeof(buf), fmt, args); + va_end(args); + if (msglevel == BLOGIC_ANNOUNCE_LEVEL) { + static int msglines = 0; + strcpy(&adapter->msgbuf[adapter->msgbuflen], buf); + adapter->msgbuflen += len; + if (++msglines <= 2) + printk("%sscsi: %s", blogic_msglevelmap[msglevel], buf); + } else if (msglevel == BLOGIC_INFO_LEVEL) { + strcpy(&adapter->msgbuf[adapter->msgbuflen], buf); + adapter->msgbuflen += len; + if (begin) { + if (buf[0] != '\n' || len > 1) + printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf); + } else + pr_cont("%s", buf); + } else { + if (begin) { + if (adapter != NULL && adapter->adapter_initd) + printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf); + else + printk("%s%s", blogic_msglevelmap[msglevel], buf); + } else + pr_cont("%s", buf); + } + begin = (buf[len - 1] == '\n'); +} + + +/* + blogic_parse parses an individual option keyword. It returns true + and updates the pointer if the keyword is recognized and false otherwise. +*/ + +static bool __init blogic_parse(char **str, char *keyword) +{ + char *pointer = *str; + while (*keyword != '\0') { + char strch = *pointer++; + char keywordch = *keyword++; + if (strch >= 'A' && strch <= 'Z') + strch += 'a' - 'Z'; + if (keywordch >= 'A' && keywordch <= 'Z') + keywordch += 'a' - 'Z'; + if (strch != keywordch) + return false; + } + *str = pointer; + return true; +} + + +/* + blogic_parseopts handles processing of BusLogic Driver Options + specifications. + + BusLogic Driver Options may be specified either via the Linux Kernel Command + Line or via the Loadable Kernel Module Installation Facility. Driver Options + for multiple host adapters may be specified either by separating the option + strings by a semicolon, or by specifying multiple "BusLogic=" strings on the + command line. Individual option specifications for a single host adapter are + separated by commas. The Probing and Debugging Options apply to all host + adapters whereas the remaining options apply individually only to the + selected host adapter. + + The BusLogic Driver Probing Options are described in + <file:Documentation/scsi/BusLogic.rst>. +*/ + +static int __init blogic_parseopts(char *options) +{ + while (true) { + struct blogic_drvr_options *drvr_opts = + &blogic_drvr_options[blogic_drvr_options_count++]; + int tgt_id; + + memset(drvr_opts, 0, sizeof(struct blogic_drvr_options)); + while (*options != '\0' && *options != ';') { + if (blogic_parse(&options, "NoProbePCI")) + blogic_probe_options.noprobe_pci = true; + else if (blogic_parse(&options, "NoProbe")) + blogic_probe_options.noprobe = true; + else if (blogic_parse(&options, "NoSortPCI")) + blogic_probe_options.nosort_pci = true; + else if (blogic_parse(&options, "MultiMasterFirst")) + blogic_probe_options.multimaster_first = true; + else if (blogic_parse(&options, "FlashPointFirst")) + blogic_probe_options.flashpoint_first = true; + /* Tagged Queuing Options. */ + else if (blogic_parse(&options, "QueueDepth:[") || + blogic_parse(&options, "QD:[")) { + for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) { + unsigned short qdepth = simple_strtoul(options, &options, 0); + if (qdepth > BLOGIC_MAX_TAG_DEPTH) { + blogic_err("BusLogic: Invalid Driver Options (invalid Queue Depth %d)\n", NULL, qdepth); + return 0; + } + drvr_opts->qdepth[tgt_id] = qdepth; + if (*options == ',') + options++; + else if (*options == ']') + break; + else { + blogic_err("BusLogic: Invalid Driver Options (',' or ']' expected at '%s')\n", NULL, options); + return 0; + } + } + if (*options != ']') { + blogic_err("BusLogic: Invalid Driver Options (']' expected at '%s')\n", NULL, options); + return 0; + } else + options++; + } else if (blogic_parse(&options, "QueueDepth:") || blogic_parse(&options, "QD:")) { + unsigned short qdepth = simple_strtoul(options, &options, 0); + if (qdepth == 0 || + qdepth > BLOGIC_MAX_TAG_DEPTH) { + blogic_err("BusLogic: Invalid Driver Options (invalid Queue Depth %d)\n", NULL, qdepth); + return 0; + } + drvr_opts->common_qdepth = qdepth; + for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) + drvr_opts->qdepth[tgt_id] = qdepth; + } else if (blogic_parse(&options, "TaggedQueuing:") || + blogic_parse(&options, "TQ:")) { + if (blogic_parse(&options, "Default")) { + drvr_opts->tagq_ok = 0x0000; + drvr_opts->tagq_ok_mask = 0x0000; + } else if (blogic_parse(&options, "Enable")) { + drvr_opts->tagq_ok = 0xFFFF; + drvr_opts->tagq_ok_mask = 0xFFFF; + } else if (blogic_parse(&options, "Disable")) { + drvr_opts->tagq_ok = 0x0000; + drvr_opts->tagq_ok_mask = 0xFFFF; + } else { + unsigned short tgt_bit; + for (tgt_id = 0, tgt_bit = 1; + tgt_id < BLOGIC_MAXDEV; + tgt_id++, tgt_bit <<= 1) + switch (*options++) { + case 'Y': + drvr_opts->tagq_ok |= tgt_bit; + drvr_opts->tagq_ok_mask |= tgt_bit; + break; + case 'N': + drvr_opts->tagq_ok &= ~tgt_bit; + drvr_opts->tagq_ok_mask |= tgt_bit; + break; + case 'X': + break; + default: + options--; + tgt_id = BLOGIC_MAXDEV; + break; + } + } + } + /* Miscellaneous Options. */ + else if (blogic_parse(&options, "BusSettleTime:") || + blogic_parse(&options, "BST:")) { + unsigned short bus_settle_time = + simple_strtoul(options, &options, 0); + if (bus_settle_time > 5 * 60) { + blogic_err("BusLogic: Invalid Driver Options (invalid Bus Settle Time %d)\n", NULL, bus_settle_time); + return 0; + } + drvr_opts->bus_settle_time = bus_settle_time; + } else if (blogic_parse(&options, + "InhibitTargetInquiry")) + drvr_opts->stop_tgt_inquiry = true; + /* Debugging Options. */ + else if (blogic_parse(&options, "TraceProbe")) + blogic_global_options.trace_probe = true; + else if (blogic_parse(&options, "TraceHardwareReset")) + blogic_global_options.trace_hw_reset = true; + else if (blogic_parse(&options, "TraceConfiguration")) + blogic_global_options.trace_config = true; + else if (blogic_parse(&options, "TraceErrors")) + blogic_global_options.trace_err = true; + else if (blogic_parse(&options, "Debug")) { + blogic_global_options.trace_probe = true; + blogic_global_options.trace_hw_reset = true; + blogic_global_options.trace_config = true; + blogic_global_options.trace_err = true; + } + if (*options == ',') + options++; + else if (*options != ';' && *options != '\0') { + blogic_err("BusLogic: Unexpected Driver Option '%s' ignored\n", NULL, options); + *options = '\0'; + } + } + if (!(blogic_drvr_options_count == 0 || + blogic_probeinfo_count == 0 || + blogic_drvr_options_count == blogic_probeinfo_count)) { + blogic_err("BusLogic: Invalid Driver Options (all or no I/O Addresses must be specified)\n", NULL); + return 0; + } + /* + Tagged Queuing is disabled when the Queue Depth is 1 since queuing + multiple commands is not possible. + */ + for (tgt_id = 0; tgt_id < BLOGIC_MAXDEV; tgt_id++) + if (drvr_opts->qdepth[tgt_id] == 1) { + unsigned short tgt_bit = 1 << tgt_id; + drvr_opts->tagq_ok &= ~tgt_bit; + drvr_opts->tagq_ok_mask |= tgt_bit; + } + if (*options == ';') + options++; + if (*options == '\0') + return 0; + } + return 1; +} + +/* + Get it all started +*/ + +static struct scsi_host_template blogic_template = { + .module = THIS_MODULE, + .proc_name = "BusLogic", + .write_info = blogic_write_info, + .show_info = blogic_show_info, + .name = "BusLogic", + .info = blogic_drvr_info, + .queuecommand = blogic_qcmd, + .slave_configure = blogic_slaveconfig, + .bios_param = blogic_diskparam, + .eh_host_reset_handler = blogic_hostreset, +#if 0 + .eh_abort_handler = blogic_abort, +#endif + .max_sectors = 128, +}; + +/* + blogic_setup handles processing of Kernel Command Line Arguments. +*/ + +static int __init blogic_setup(char *str) +{ + int ints[3]; + + (void) get_options(str, ARRAY_SIZE(ints), ints); + + if (ints[0] != 0) { + blogic_err("BusLogic: Obsolete Command Line Entry Format Ignored\n", NULL); + return 0; + } + if (str == NULL || *str == '\0') + return 0; + return blogic_parseopts(str); +} + +/* + * Exit function. Deletes all hosts associated with this driver. + */ + +static void __exit blogic_exit(void) +{ + struct blogic_adapter *ha, *next; + + list_for_each_entry_safe(ha, next, &blogic_host_list, host_list) + blogic_deladapter(ha); +} + +__setup("BusLogic=", blogic_setup); + +#ifdef MODULE +/*static struct pci_device_id blogic_pci_tbl[] = { + { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { } +};*/ +static const struct pci_device_id blogic_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER)}, + {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC)}, + {PCI_DEVICE(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT)}, + {0, }, +}; +#endif +MODULE_DEVICE_TABLE(pci, blogic_pci_tbl); + +module_init(blogic_init); +module_exit(blogic_exit); |