Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 783 insertions, 0 deletions

diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
new file mode 100644
index 000000000..f0ef8f7f8
--- /dev/null
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -0,0 +1,783 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *
+ *			Linux MegaRAID Unified device driver
+ *
+ * Copyright (c) 2003-2004  LSI Logic Corporation.
+ *
+ * FILE		: mbox_defs.h
+ */
+#ifndef _MRAID_MBOX_DEFS_H_
+#define _MRAID_MBOX_DEFS_H_
+
+#include <linux/types.h>
+
+/*
+ * Commands and states for mailbox based controllers
+ */
+
+#define MBOXCMD_LREAD		0x01
+#define MBOXCMD_LWRITE		0x02
+#define MBOXCMD_PASSTHRU	0x03
+#define MBOXCMD_ADPEXTINQ	0x04
+#define MBOXCMD_ADAPTERINQ	0x05
+#define MBOXCMD_LREAD64		0xA7
+#define MBOXCMD_LWRITE64	0xA8
+#define MBOXCMD_PASSTHRU64	0xC3
+#define MBOXCMD_EXTPTHRU	0xE3
+
+#define MAIN_MISC_OPCODE	0xA4
+#define GET_MAX_SG_SUPPORT	0x01
+#define SUPPORT_EXT_CDB		0x16
+
+#define FC_NEW_CONFIG		0xA1
+#define NC_SUBOP_PRODUCT_INFO	0x0E
+#define NC_SUBOP_ENQUIRY3	0x0F
+#define ENQ3_GET_SOLICITED_FULL	0x02
+#define OP_DCMD_READ_CONFIG	0x04
+#define NEW_READ_CONFIG_8LD	0x67
+#define READ_CONFIG_8LD		0x07
+#define FLUSH_ADAPTER		0x0A
+#define FLUSH_SYSTEM		0xFE
+
+/*
+ * Command for random deletion of logical drives
+ */
+#define	FC_DEL_LOGDRV		0xA4
+#define	OP_SUP_DEL_LOGDRV	0x2A
+#define OP_GET_LDID_MAP		0x18
+#define OP_DEL_LOGDRV		0x1C
+
+/*
+ * BIOS commands
+ */
+#define IS_BIOS_ENABLED		0x62
+#define GET_BIOS		0x01
+#define CHNL_CLASS		0xA9
+#define GET_CHNL_CLASS		0x00
+#define SET_CHNL_CLASS		0x01
+#define CH_RAID			0x01
+#define CH_SCSI			0x00
+#define BIOS_PVT_DATA		0x40
+#define GET_BIOS_PVT_DATA	0x00
+
+
+/*
+ * Commands to support clustering
+ */
+#define GET_TARGET_ID		0x7D
+#define CLUSTER_OP		0x70
+#define GET_CLUSTER_MODE	0x02
+#define CLUSTER_CMD		0x6E
+#define RESERVE_LD		0x01
+#define RELEASE_LD		0x02
+#define RESET_RESERVATIONS	0x03
+#define RESERVATION_STATUS	0x04
+#define RESERVE_PD		0x05
+#define RELEASE_PD		0x06
+
+
+/*
+ * Module battery status
+ */
+#define BATTERY_MODULE_MISSING		0x01
+#define BATTERY_LOW_VOLTAGE		0x02
+#define BATTERY_TEMP_HIGH		0x04
+#define BATTERY_PACK_MISSING		0x08
+#define BATTERY_CHARGE_MASK		0x30
+#define BATTERY_CHARGE_DONE		0x00
+#define BATTERY_CHARGE_INPROG		0x10
+#define BATTERY_CHARGE_FAIL		0x20
+#define BATTERY_CYCLES_EXCEEDED		0x40
+
+/*
+ * Physical drive states.
+ */
+#define PDRV_UNCNF	0
+#define PDRV_ONLINE	3
+#define PDRV_FAILED	4
+#define PDRV_RBLD	5
+#define PDRV_HOTSPARE	6
+
+
+/*
+ * Raid logical drive states.
+ */
+#define RDRV_OFFLINE	0
+#define RDRV_DEGRADED	1
+#define RDRV_OPTIMAL	2
+#define RDRV_DELETED	3
+
+/*
+ * Read, write and cache policies
+ */
+#define NO_READ_AHEAD		0
+#define READ_AHEAD		1
+#define ADAP_READ_AHEAD		2
+#define WRMODE_WRITE_THRU	0
+#define WRMODE_WRITE_BACK	1
+#define CACHED_IO		0
+#define DIRECT_IO		1
+
+#define MAX_LOGICAL_DRIVES_8LD		8
+#define MAX_LOGICAL_DRIVES_40LD		40
+#define FC_MAX_PHYSICAL_DEVICES		256
+#define MAX_MBOX_CHANNELS		5
+#define MAX_MBOX_TARGET			15
+#define MBOX_MAX_PHYSICAL_DRIVES	MAX_MBOX_CHANNELS*MAX_MBOX_TARGET
+#define MAX_ROW_SIZE_40LD		32
+#define MAX_ROW_SIZE_8LD		8
+#define SPAN_DEPTH_8_SPANS		8
+#define SPAN_DEPTH_4_SPANS		4
+#define MAX_REQ_SENSE_LEN		0x20
+
+
+
+/**
+ * struct mbox_t - Driver and f/w handshake structure.
+ * @cmd		: firmware command
+ * @cmdid	: command id
+ * @numsectors	: number of sectors to be transferred
+ * @lba		: Logical Block Address on LD
+ * @xferaddr	: DMA address for data transfer
+ * @logdrv	: logical drive number
+ * @numsge	: number of scatter gather elements in sg list
+ * @resvd	: reserved
+ * @busy	: f/w busy, must wait to issue more commands.
+ * @numstatus	: number of commands completed.
+ * @status	: status of the commands completed
+ * @completed	: array of completed command ids.
+ * @poll	: poll and ack sequence
+ * @ack		: poll and ack sequence
+ *
+ * The central handshake structure between the driver and the firmware. This
+ * structure must be allocated by the driver and aligned at 8-byte boundary.
+ */
+#define MBOX_MAX_FIRMWARE_STATUS	46
+typedef struct {
+	uint8_t		cmd;
+	uint8_t		cmdid;
+	uint16_t	numsectors;
+	uint32_t	lba;
+	uint32_t	xferaddr;
+	uint8_t		logdrv;
+	uint8_t		numsge;
+	uint8_t		resvd;
+	uint8_t		busy;
+	uint8_t		numstatus;
+	uint8_t		status;
+	uint8_t		completed[MBOX_MAX_FIRMWARE_STATUS];
+	uint8_t		poll;
+	uint8_t		ack;
+} __attribute__ ((packed)) mbox_t;
+
+
+/**
+ * mbox64_t - 64-bit extension for the mailbox
+ * @segment_lo	: the low 32-bits of the address of the scatter-gather list
+ * @segment_hi	: the upper 32-bits of the address of the scatter-gather list
+ * @mbox	: 32-bit mailbox, whose xferadder field must be set to
+ *		0xFFFFFFFF
+ *
+ * This is the extension of the 32-bit mailbox to be able to perform DMA
+ * beyond 4GB address range.
+ */
+typedef struct {
+	uint32_t	xferaddr_lo;
+	uint32_t	xferaddr_hi;
+	mbox_t		mbox32;
+} __attribute__ ((packed)) mbox64_t;
+
+/*
+ * mailbox structure used for internal commands
+ */
+typedef struct {
+	u8	cmd;
+	u8	cmdid;
+	u8	opcode;
+	u8	subopcode;
+	u32	lba;
+	u32	xferaddr;
+	u8	logdrv;
+	u8	rsvd[3];
+	u8	numstatus;
+	u8	status;
+} __attribute__ ((packed)) int_mbox_t;
+
+/**
+ * mraid_passthru_t - passthru structure to issue commands to physical devices
+ * @timeout		: command timeout, 0=6sec, 1=60sec, 2=10min, 3=3hr
+ * @ars			: set if ARS required after check condition
+ * @islogical		: set if command meant for logical devices
+ * @logdrv		: logical drive number if command for LD
+ * @channel		: Channel on which physical device is located
+ * @target		: SCSI target of the device
+ * @queuetag		: unused
+ * @queueaction		: unused
+ * @cdb			: SCSI CDB
+ * @cdblen		: length of the CDB
+ * @reqsenselen		: amount of request sense data to be returned
+ * @reqsensearea	: Sense information buffer
+ * @numsge		: number of scatter-gather elements in the sg list
+ * @scsistatus		: SCSI status of the command completed.
+ * @dataxferaddr	: DMA data transfer address
+ * @dataxferlen		: amount of the data to be transferred.
+ */
+typedef struct {
+	uint8_t		timeout		:3;
+	uint8_t		ars		:1;
+	uint8_t		reserved	:3;
+	uint8_t		islogical	:1;
+	uint8_t		logdrv;
+	uint8_t		channel;
+	uint8_t		target;
+	uint8_t		queuetag;
+	uint8_t		queueaction;
+	uint8_t		cdb[10];
+	uint8_t		cdblen;
+	uint8_t		reqsenselen;
+	uint8_t		reqsensearea[MAX_REQ_SENSE_LEN];
+	uint8_t		numsge;
+	uint8_t		scsistatus;
+	uint32_t	dataxferaddr;
+	uint32_t	dataxferlen;
+} __attribute__ ((packed)) mraid_passthru_t;
+
+typedef struct {
+
+	uint32_t		dataxferaddr_lo;
+	uint32_t		dataxferaddr_hi;
+	mraid_passthru_t	pthru32;
+
+} __attribute__ ((packed)) mega_passthru64_t;
+
+/**
+ * mraid_epassthru_t - passthru structure to issue commands to physical devices
+ * @timeout		: command timeout, 0=6sec, 1=60sec, 2=10min, 3=3hr
+ * @ars			: set if ARS required after check condition
+ * @rsvd1		: reserved field
+ * @cd_rom		: (?)
+ * @rsvd2		: reserved field
+ * @islogical		: set if command meant for logical devices
+ * @logdrv		: logical drive number if command for LD
+ * @channel		: Channel on which physical device is located
+ * @target		: SCSI target of the device
+ * @queuetag		: unused
+ * @queueaction		: unused
+ * @cdblen		: length of the CDB
+ * @rsvd3		: reserved field
+ * @cdb			: SCSI CDB
+ * @numsge		: number of scatter-gather elements in the sg list
+ * @status		: SCSI status of the command completed.
+ * @reqsenselen		: amount of request sense data to be returned
+ * @reqsensearea	: Sense information buffer
+ * @rsvd4		: reserved field
+ * @dataxferaddr	: DMA data transfer address
+ * @dataxferlen		: amount of the data to be transferred.
+ */
+typedef struct {
+	uint8_t		timeout		:3;
+	uint8_t		ars		:1;
+	uint8_t		rsvd1		:1;
+	uint8_t		cd_rom		:1;
+	uint8_t		rsvd2		:1;
+	uint8_t		islogical	:1;
+	uint8_t		logdrv;
+	uint8_t		channel;
+	uint8_t		target;
+	uint8_t		queuetag;
+	uint8_t		queueaction;
+	uint8_t		cdblen;
+	uint8_t		rsvd3;
+	uint8_t		cdb[16];
+	uint8_t		numsge;
+	uint8_t		status;
+	uint8_t		reqsenselen;
+	uint8_t		reqsensearea[MAX_REQ_SENSE_LEN];
+	uint8_t		rsvd4;
+	uint32_t	dataxferaddr;
+	uint32_t	dataxferlen;
+} __attribute__ ((packed)) mraid_epassthru_t;
+
+
+/**
+ * mraid_pinfo_t - product info, static information about the controller
+ * @data_size		: current size in bytes (not including resvd)
+ * @config_signature	: Current value is 0x00282008
+ * @fw_version		: Firmware version
+ * @bios_version	: version of the BIOS
+ * @product_name	: Name given to the controller
+ * @max_commands	: Maximum concurrent commands supported
+ * @nchannels		: Number of SCSI Channels detected
+ * @fc_loop_present	: Number of Fibre Loops detected
+ * @mem_type		: EDO, FPM, SDRAM etc
+ * @signature		:
+ * @dram_size		: In terms of MB
+ * @subsysid		: device PCI subsystem ID
+ * @subsysvid		: device PCI subsystem vendor ID
+ * @notify_counters	:
+ * @pad1k		: 135 + 889 resvd = 1024 total size
+ *
+ * This structures holds the information about the controller which is not
+ * expected to change dynamically.
+ *
+ * The current value of config signature is 0x00282008:
+ * 0x28 = MAX_LOGICAL_DRIVES,
+ * 0x20 = Number of stripes and
+ * 0x08 = Number of spans
+ */
+typedef struct {
+	uint32_t	data_size;
+	uint32_t	config_signature;
+	uint8_t		fw_version[16];
+	uint8_t		bios_version[16];
+	uint8_t		product_name[80];
+	uint8_t		max_commands;
+	uint8_t		nchannels;
+	uint8_t		fc_loop_present;
+	uint8_t		mem_type;
+	uint32_t	signature;
+	uint16_t	dram_size;
+	uint16_t	subsysid;
+	uint16_t	subsysvid;
+	uint8_t		notify_counters;
+	uint8_t		pad1k[889];
+} __attribute__ ((packed)) mraid_pinfo_t;
+
+
+/**
+ * mraid_notify_t - the notification structure
+ * @global_counter		: Any change increments this counter
+ * @param_counter		: Indicates any params changed
+ * @param_id			: Param modified - defined below
+ * @param_val			: New val of last param modified
+ * @write_config_counter	: write config occurred
+ * @write_config_rsvd		:
+ * @ldrv_op_counter		: Indicates ldrv op started/completed
+ * @ldrv_opid			: ldrv num
+ * @ldrv_opcmd			: ldrv operation - defined below
+ * @ldrv_opstatus		: status of the operation
+ * @ldrv_state_counter		: Indicates change of ldrv state
+ * @ldrv_state_id		: ldrv num
+ * @ldrv_state_new		: New state
+ * @ldrv_state_old		: old state
+ * @pdrv_state_counter		: Indicates change of ldrv state
+ * @pdrv_state_id		: pdrv id
+ * @pdrv_state_new		: New state
+ * @pdrv_state_old		: old state
+ * @pdrv_fmt_counter		: Indicates pdrv format started/over
+ * @pdrv_fmt_id			: pdrv id
+ * @pdrv_fmt_val		: format started/over
+ * @pdrv_fmt_rsvd		:
+ * @targ_xfer_counter		: Indicates SCSI-2 Xfer rate change
+ * @targ_xfer_id		: pdrv Id
+ * @targ_xfer_val		: new Xfer params of last pdrv
+ * @targ_xfer_rsvd		:
+ * @fcloop_id_chg_counter	: Indicates loopid changed
+ * @fcloopid_pdrvid		: pdrv id
+ * @fcloop_id0			: loopid on fc loop 0
+ * @fcloop_id1			: loopid on fc loop 1
+ * @fcloop_state_counter	: Indicates loop state changed
+ * @fcloop_state0		: state of fc loop 0
+ * @fcloop_state1		: state of fc loop 1
+ * @fcloop_state_rsvd		:
+ */
+typedef struct {
+	uint32_t	global_counter;
+	uint8_t		param_counter;
+	uint8_t		param_id;
+	uint16_t	param_val;
+	uint8_t		write_config_counter;
+	uint8_t		write_config_rsvd[3];
+	uint8_t		ldrv_op_counter;
+	uint8_t		ldrv_opid;
+	uint8_t		ldrv_opcmd;
+	uint8_t		ldrv_opstatus;
+	uint8_t		ldrv_state_counter;
+	uint8_t		ldrv_state_id;
+	uint8_t		ldrv_state_new;
+	uint8_t		ldrv_state_old;
+	uint8_t		pdrv_state_counter;
+	uint8_t		pdrv_state_id;
+	uint8_t		pdrv_state_new;
+	uint8_t		pdrv_state_old;
+	uint8_t		pdrv_fmt_counter;
+	uint8_t		pdrv_fmt_id;
+	uint8_t		pdrv_fmt_val;
+	uint8_t		pdrv_fmt_rsvd;
+	uint8_t		targ_xfer_counter;
+	uint8_t		targ_xfer_id;
+	uint8_t		targ_xfer_val;
+	uint8_t		targ_xfer_rsvd;
+	uint8_t		fcloop_id_chg_counter;
+	uint8_t		fcloopid_pdrvid;
+	uint8_t		fcloop_id0;
+	uint8_t		fcloop_id1;
+	uint8_t		fcloop_state_counter;
+	uint8_t		fcloop_state0;
+	uint8_t		fcloop_state1;
+	uint8_t		fcloop_state_rsvd;
+} __attribute__ ((packed)) mraid_notify_t;
+
+
+/**
+ * mraid_inquiry3_t - enquiry for device information
+ *
+ * @data_size		: current size in bytes (not including resvd)
+ * @notify		:
+ * @notify_rsvd		:
+ * @rebuild_rate	: rebuild rate (0% - 100%)
+ * @cache_flush_int	: cache flush interval in seconds
+ * @sense_alert		:
+ * @drive_insert_count	: drive insertion count
+ * @battery_status	:
+ * @num_ldrv		: no. of Log Drives configured
+ * @recon_state		: state of reconstruct
+ * @ldrv_op_status	: logdrv Status
+ * @ldrv_size		: size of each log drv
+ * @ldrv_prop		:
+ * @ldrv_state		: state of log drives
+ * @pdrv_state		: state of phys drvs.
+ * @pdrv_format		:
+ * @targ_xfer		: phys device transfer rate
+ * @pad1k		: 761 + 263reserved = 1024 bytes total size
+ */
+#define MAX_NOTIFY_SIZE		0x80
+#define CUR_NOTIFY_SIZE		sizeof(mraid_notify_t)
+
+typedef struct {
+	uint32_t	data_size;
+
+	mraid_notify_t	notify;
+
+	uint8_t		notify_rsvd[MAX_NOTIFY_SIZE - CUR_NOTIFY_SIZE];
+
+	uint8_t		rebuild_rate;
+	uint8_t		cache_flush_int;
+	uint8_t		sense_alert;
+	uint8_t		drive_insert_count;
+
+	uint8_t		battery_status;
+	uint8_t		num_ldrv;
+	uint8_t		recon_state[MAX_LOGICAL_DRIVES_40LD / 8];
+	uint16_t	ldrv_op_status[MAX_LOGICAL_DRIVES_40LD / 8];
+
+	uint32_t	ldrv_size[MAX_LOGICAL_DRIVES_40LD];
+	uint8_t		ldrv_prop[MAX_LOGICAL_DRIVES_40LD];
+	uint8_t		ldrv_state[MAX_LOGICAL_DRIVES_40LD];
+	uint8_t		pdrv_state[FC_MAX_PHYSICAL_DEVICES];
+	uint16_t	pdrv_format[FC_MAX_PHYSICAL_DEVICES / 16];
+
+	uint8_t		targ_xfer[80];
+	uint8_t		pad1k[263];
+} __attribute__ ((packed)) mraid_inquiry3_t;
+
+
+/**
+ * mraid_adapinfo_t - information about the adapter
+ * @max_commands		: max concurrent commands supported
+ * @rebuild_rate		: rebuild rate - 0% thru 100%
+ * @max_targ_per_chan		: max targ per channel
+ * @nchannels			: number of channels on HBA
+ * @fw_version			: firmware version
+ * @age_of_flash		: number of times FW has been flashed
+ * @chip_set_value		: contents of 0xC0000832
+ * @dram_size			: in MB
+ * @cache_flush_interval	: in seconds
+ * @bios_version		:
+ * @board_type			:
+ * @sense_alert			:
+ * @write_config_count		: increase with every configuration change
+ * @drive_inserted_count	: increase with every drive inserted
+ * @inserted_drive		: channel:Id of inserted drive
+ * @battery_status		: bit 0: battery module missing
+ *				bit 1: VBAD
+ *				bit 2: temperature high
+ *				bit 3: battery pack missing
+ *				bit 4,5:
+ *					00 - charge complete
+ *					01 - fast charge in progress
+ *					10 - fast charge fail
+ *					11 - undefined
+ *				bit 6: counter > 1000
+ *				bit 7: Undefined
+ * @dec_fault_bus_info		:
+ */
+typedef struct {
+	uint8_t		max_commands;
+	uint8_t		rebuild_rate;
+	uint8_t		max_targ_per_chan;
+	uint8_t		nchannels;
+	uint8_t		fw_version[4];
+	uint16_t	age_of_flash;
+	uint8_t		chip_set_value;
+	uint8_t		dram_size;
+	uint8_t		cache_flush_interval;
+	uint8_t		bios_version[4];
+	uint8_t		board_type;
+	uint8_t		sense_alert;
+	uint8_t		write_config_count;
+	uint8_t		battery_status;
+	uint8_t		dec_fault_bus_info;
+} __attribute__ ((packed)) mraid_adapinfo_t;
+
+
+/**
+ * mraid_ldrv_info_t - information about the logical drives
+ * @nldrv	: Number of logical drives configured
+ * @rsvd	:
+ * @size	: size of each logical drive
+ * @prop	:
+ * @state	: state of each logical drive
+ */
+typedef struct {
+	uint8_t		nldrv;
+	uint8_t		rsvd[3];
+	uint32_t	size[MAX_LOGICAL_DRIVES_8LD];
+	uint8_t		prop[MAX_LOGICAL_DRIVES_8LD];
+	uint8_t		state[MAX_LOGICAL_DRIVES_8LD];
+} __attribute__ ((packed)) mraid_ldrv_info_t;
+
+
+/**
+ * mraid_pdrv_info_t - information about the physical drives
+ * @pdrv_state	: state of each physical drive
+ */
+typedef struct {
+	uint8_t		pdrv_state[MBOX_MAX_PHYSICAL_DRIVES];
+	uint8_t		rsvd;
+} __attribute__ ((packed)) mraid_pdrv_info_t;
+
+
+/**
+ * mraid_inquiry_t - RAID inquiry, mailbox command 0x05
+ * @mraid_adapinfo_t	: adapter information
+ * @mraid_ldrv_info_t	: logical drives information
+ * @mraid_pdrv_info_t	: physical drives information
+ */
+typedef struct {
+	mraid_adapinfo_t	adapter_info;
+	mraid_ldrv_info_t	logdrv_info;
+	mraid_pdrv_info_t	pdrv_info;
+} __attribute__ ((packed)) mraid_inquiry_t;
+
+
+/**
+ * mraid_extinq_t - RAID extended inquiry, mailbox command 0x04
+ *
+ * @raid_inq		: raid inquiry
+ * @phys_drv_format	:
+ * @stack_attn		:
+ * @modem_status	:
+ * @rsvd		:
+ */
+typedef struct {
+	mraid_inquiry_t	raid_inq;
+	uint16_t	phys_drv_format[MAX_MBOX_CHANNELS];
+	uint8_t		stack_attn;
+	uint8_t		modem_status;
+	uint8_t		rsvd[2];
+} __attribute__ ((packed)) mraid_extinq_t;
+
+
+/**
+ * adap_device_t - device information
+ * @channel	: channel fpor the device
+ * @target	: target ID of the device
+ */
+typedef struct {
+	uint8_t		channel;
+	uint8_t		target;
+}__attribute__ ((packed)) adap_device_t;
+
+
+/**
+ * adap_span_40ld_t - 40LD span
+ * @start_blk	: starting block
+ * @num_blks	: number of blocks
+ */
+typedef struct {
+	uint32_t	start_blk;
+	uint32_t	num_blks;
+	adap_device_t	device[MAX_ROW_SIZE_40LD];
+}__attribute__ ((packed)) adap_span_40ld_t;
+
+
+/**
+ * adap_span_8ld_t - 8LD span
+ * @start_blk	: starting block
+ * @num_blks	: number of blocks
+ */
+typedef struct {
+	uint32_t	start_blk;
+	uint32_t	num_blks;
+	adap_device_t	device[MAX_ROW_SIZE_8LD];
+}__attribute__ ((packed)) adap_span_8ld_t;
+
+
+/**
+ * logdrv_param_t - logical drives parameters
+ *
+ * @span_depth	: total number of spans
+ * @level	: RAID level
+ * @read_ahead	: read ahead, no read ahead, adaptive read ahead
+ * @stripe_sz	: encoded stripe size
+ * @status	: status of the logical drive
+ * @write_mode	: write mode, write_through/write_back
+ * @direct_io	: direct io or through cache
+ * @row_size	: number of stripes in a row
+ */
+typedef struct {
+	uint8_t		span_depth;
+	uint8_t		level;
+	uint8_t		read_ahead;
+	uint8_t		stripe_sz;
+	uint8_t		status;
+	uint8_t		write_mode;
+	uint8_t		direct_io;
+	uint8_t		row_size;
+} __attribute__ ((packed)) logdrv_param_t;
+
+
+/**
+ * logdrv_40ld_t - logical drive definition for 40LD controllers
+ * @lparam	: logical drives parameters
+ * @span	: span
+ */
+typedef struct {
+	logdrv_param_t		lparam;
+	adap_span_40ld_t	span[SPAN_DEPTH_8_SPANS];
+}__attribute__ ((packed)) logdrv_40ld_t;
+
+
+/**
+ * logdrv_8ld_span8_t - logical drive definition for 8LD controllers
+ * @lparam	: logical drives parameters
+ * @span	: span
+ *
+ * 8-LD logical drive with up to 8 spans
+ */
+typedef struct {
+	logdrv_param_t	lparam;
+	adap_span_8ld_t	span[SPAN_DEPTH_8_SPANS];
+}__attribute__ ((packed)) logdrv_8ld_span8_t;
+
+
+/**
+ * logdrv_8ld_span4_t - logical drive definition for 8LD controllers
+ * @lparam	: logical drives parameters
+ * @span	: span
+ *
+ * 8-LD logical drive with up to 4 spans
+ */
+typedef struct {
+	logdrv_param_t	lparam;
+	adap_span_8ld_t	span[SPAN_DEPTH_4_SPANS];
+}__attribute__ ((packed)) logdrv_8ld_span4_t;
+
+
+/**
+ * phys_drive_t - physical device information
+ * @type	: Type of the device
+ * @cur_status	: current status of the device
+ * @tag_depth	: Level of tagging
+ * @sync_neg	: sync negotiation - ENABLE or DISABLE
+ * @size	: configurable size in terms of 512 byte
+ */
+typedef struct {
+	uint8_t		type;
+	uint8_t		cur_status;
+	uint8_t		tag_depth;
+	uint8_t		sync_neg;
+	uint32_t	size;
+}__attribute__ ((packed)) phys_drive_t;
+
+
+/**
+ * disk_array_40ld_t - disk array for 40LD controllers
+ * @numldrv	: number of logical drives
+ * @resvd	:
+ * @ldrv	: logical drives information
+ * @pdrv	: physical drives information
+ */
+typedef struct {
+	uint8_t		numldrv;
+	uint8_t		resvd[3];
+	logdrv_40ld_t	ldrv[MAX_LOGICAL_DRIVES_40LD];
+	phys_drive_t	pdrv[MBOX_MAX_PHYSICAL_DRIVES];
+}__attribute__ ((packed)) disk_array_40ld_t;
+
+
+/**
+ * disk_array_8ld_span8_t - disk array for 8LD controllers
+ * @numldrv	: number of logical drives
+ * @resvd	:
+ * @ldrv	: logical drives information
+ * @pdrv	: physical drives information
+ *
+ * Disk array for 8LD logical drives with up to 8 spans
+ */
+typedef struct {
+	uint8_t			numldrv;
+	uint8_t			resvd[3];
+	logdrv_8ld_span8_t	ldrv[MAX_LOGICAL_DRIVES_8LD];
+	phys_drive_t		pdrv[MBOX_MAX_PHYSICAL_DRIVES];
+}__attribute__ ((packed)) disk_array_8ld_span8_t;
+
+
+/**
+ * disk_array_8ld_span4_t - disk array for 8LD controllers
+ * @numldrv	: number of logical drives
+ * @resvd	:
+ * @ldrv	: logical drives information
+ * @pdrv	: physical drives information
+ *
+ * Disk array for 8LD logical drives with up to 4 spans
+ */
+typedef struct {
+	uint8_t			numldrv;
+	uint8_t			resvd[3];
+	logdrv_8ld_span4_t	ldrv[MAX_LOGICAL_DRIVES_8LD];
+	phys_drive_t		pdrv[MBOX_MAX_PHYSICAL_DRIVES];
+}__attribute__ ((packed)) disk_array_8ld_span4_t;
+
+
+/**
+ * struct private_bios_data - bios private data for boot devices
+ * @geometry	: bits 0-3 - BIOS geometry, 0x0001 - 1GB, 0x0010 - 2GB,
+ *		0x1000 - 8GB, Others values are invalid
+ * @unused	: bits 4-7 are unused
+ * @boot_drv	: logical drive set as boot drive, 0..7 - for 8LD cards,
+ * 		0..39 - for 40LD cards
+ * @cksum	: 0-(sum of first 13 bytes of this structure)
+ */
+struct private_bios_data {
+	uint8_t		geometry	:4;
+	uint8_t		unused		:4;
+	uint8_t		boot_drv;
+	uint8_t		rsvd[12];
+	uint16_t	cksum;
+} __attribute__ ((packed));
+
+
+/**
+ * mbox_sgl64 - 64-bit scatter list for mailbox based controllers
+ * @address	: address of the buffer
+ * @length	: data transfer length
+ */
+typedef struct {
+	uint64_t	address;
+	uint32_t	length;
+} __attribute__ ((packed)) mbox_sgl64;
+
+/**
+ * mbox_sgl32 - 32-bit scatter list for mailbox based controllers
+ * @address	: address of the buffer
+ * @length	: data transfer length
+ */
+typedef struct {
+	uint32_t	address;
+	uint32_t	length;
+} __attribute__ ((packed)) mbox_sgl32;
+
+#endif		// _MRAID_MBOX_DEFS_H_