diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/scsi/qla4xxx/ql4_init.c | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/scsi/qla4xxx/ql4_init.c')
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_init.c | 1265 |
1 files changed, 1265 insertions, 0 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c new file mode 100644 index 000000000..301bc09c8 --- /dev/null +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -0,0 +1,1265 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * QLogic iSCSI HBA Driver + * Copyright (c) 2003-2013 QLogic Corporation + */ + +#include <scsi/iscsi_if.h> +#include "ql4_def.h" +#include "ql4_glbl.h" +#include "ql4_dbg.h" +#include "ql4_inline.h" + +static void ql4xxx_set_mac_number(struct scsi_qla_host *ha) +{ + uint32_t value; + unsigned long flags; + + /* Get the function number */ + spin_lock_irqsave(&ha->hardware_lock, flags); + value = readw(&ha->reg->ctrl_status); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + switch (value & ISP_CONTROL_FN_MASK) { + case ISP_CONTROL_FN0_SCSI: + ha->mac_index = 1; + break; + case ISP_CONTROL_FN1_SCSI: + ha->mac_index = 3; + break; + default: + DEBUG2(printk("scsi%ld: %s: Invalid function number, " + "ispControlStatus = 0x%x\n", ha->host_no, + __func__, value)); + break; + } + DEBUG2(printk("scsi%ld: %s: mac_index %d.\n", ha->host_no, __func__, + ha->mac_index)); +} + +/** + * qla4xxx_free_ddb - deallocate ddb + * @ha: pointer to host adapter structure. + * @ddb_entry: pointer to device database entry + * + * This routine marks a DDB entry INVALID + **/ +void qla4xxx_free_ddb(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry) +{ + /* Remove device pointer from index mapping arrays */ + ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = + (struct ddb_entry *) INVALID_ENTRY; + ha->tot_ddbs--; +} + +/** + * qla4xxx_init_response_q_entries() - Initializes response queue entries. + * @ha: HA context + * + * Beginning of request ring has initialization control block already built + * by nvram config routine. + **/ +static void qla4xxx_init_response_q_entries(struct scsi_qla_host *ha) +{ + uint16_t cnt; + struct response *pkt; + + pkt = (struct response *)ha->response_ptr; + for (cnt = 0; cnt < RESPONSE_QUEUE_DEPTH; cnt++) { + pkt->signature = RESPONSE_PROCESSED; + pkt++; + } +} + +/** + * qla4xxx_init_rings - initialize hw queues + * @ha: pointer to host adapter structure. + * + * This routine initializes the internal queues for the specified adapter. + * The QLA4010 requires us to restart the queues at index 0. + * The QLA4000 doesn't care, so just default to QLA4010's requirement. + **/ +int qla4xxx_init_rings(struct scsi_qla_host *ha) +{ + unsigned long flags = 0; + int i; + + /* Initialize request queue. */ + spin_lock_irqsave(&ha->hardware_lock, flags); + ha->request_out = 0; + ha->request_in = 0; + ha->request_ptr = &ha->request_ring[ha->request_in]; + ha->req_q_count = REQUEST_QUEUE_DEPTH; + + /* Initialize response queue. */ + ha->response_in = 0; + ha->response_out = 0; + ha->response_ptr = &ha->response_ring[ha->response_out]; + + if (is_qla8022(ha)) { + writel(0, + (unsigned long __iomem *)&ha->qla4_82xx_reg->req_q_out); + writel(0, + (unsigned long __iomem *)&ha->qla4_82xx_reg->rsp_q_in); + writel(0, + (unsigned long __iomem *)&ha->qla4_82xx_reg->rsp_q_out); + } else if (is_qla8032(ha) || is_qla8042(ha)) { + writel(0, + (unsigned long __iomem *)&ha->qla4_83xx_reg->req_q_in); + writel(0, + (unsigned long __iomem *)&ha->qla4_83xx_reg->rsp_q_in); + writel(0, + (unsigned long __iomem *)&ha->qla4_83xx_reg->rsp_q_out); + } else { + /* + * Initialize DMA Shadow registers. The firmware is really + * supposed to take care of this, but on some uniprocessor + * systems, the shadow registers aren't cleared-- causing + * the interrupt_handler to think there are responses to be + * processed when there aren't. + */ + ha->shadow_regs->req_q_out = cpu_to_le32(0); + ha->shadow_regs->rsp_q_in = cpu_to_le32(0); + wmb(); + + writel(0, &ha->reg->req_q_in); + writel(0, &ha->reg->rsp_q_out); + readl(&ha->reg->rsp_q_out); + } + + qla4xxx_init_response_q_entries(ha); + + /* Initialize mailbox active array */ + for (i = 0; i < MAX_MRB; i++) + ha->active_mrb_array[i] = NULL; + + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + return QLA_SUCCESS; +} + +/** + * qla4xxx_get_sys_info - validate adapter MAC address(es) + * @ha: pointer to host adapter structure. + * + **/ +int qla4xxx_get_sys_info(struct scsi_qla_host *ha) +{ + struct flash_sys_info *sys_info; + dma_addr_t sys_info_dma; + int status = QLA_ERROR; + + sys_info = dma_alloc_coherent(&ha->pdev->dev, sizeof(*sys_info), + &sys_info_dma, GFP_KERNEL); + if (sys_info == NULL) { + DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n", + ha->host_no, __func__)); + + goto exit_get_sys_info_no_free; + } + + /* Get flash sys info */ + if (qla4xxx_get_flash(ha, sys_info_dma, FLASH_OFFSET_SYS_INFO, + sizeof(*sys_info)) != QLA_SUCCESS) { + DEBUG2(printk("scsi%ld: %s: get_flash FLASH_OFFSET_SYS_INFO " + "failed\n", ha->host_no, __func__)); + + goto exit_get_sys_info; + } + + /* Save M.A.C. address & serial_number */ + memcpy(ha->my_mac, &sys_info->physAddr[0].address[0], + min(sizeof(ha->my_mac), + sizeof(sys_info->physAddr[0].address))); + memcpy(ha->serial_number, &sys_info->acSerialNumber, + min(sizeof(ha->serial_number), + sizeof(sys_info->acSerialNumber))); + + status = QLA_SUCCESS; + +exit_get_sys_info: + dma_free_coherent(&ha->pdev->dev, sizeof(*sys_info), sys_info, + sys_info_dma); + +exit_get_sys_info_no_free: + return status; +} + +/** + * qla4xxx_init_local_data - initialize adapter specific local data + * @ha: pointer to host adapter structure. + * + **/ +static void qla4xxx_init_local_data(struct scsi_qla_host *ha) +{ + /* Initialize aen queue */ + ha->aen_q_count = MAX_AEN_ENTRIES; +} + +static uint8_t +qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha) +{ + uint8_t ipv4_wait = 0; + uint8_t ipv6_wait = 0; + int8_t ip_address[IPv6_ADDR_LEN] = {0} ; + + /* If both IPv4 & IPv6 are enabled, possibly only one + * IP address may be acquired, so check to see if we + * need to wait for another */ + if (is_ipv4_enabled(ha) && is_ipv6_enabled(ha)) { + if (((ha->addl_fw_state & FW_ADDSTATE_DHCPv4_ENABLED) != 0) && + ((ha->addl_fw_state & + FW_ADDSTATE_DHCPv4_LEASE_ACQUIRED) == 0)) { + ipv4_wait = 1; + } + if (((ha->ip_config.ipv6_addl_options & + IPV6_ADDOPT_NEIGHBOR_DISCOVERY_ADDR_ENABLE) != 0) && + ((ha->ip_config.ipv6_link_local_state == + IP_ADDRSTATE_ACQUIRING) || + (ha->ip_config.ipv6_addr0_state == + IP_ADDRSTATE_ACQUIRING) || + (ha->ip_config.ipv6_addr1_state == + IP_ADDRSTATE_ACQUIRING))) { + + ipv6_wait = 1; + + if ((ha->ip_config.ipv6_link_local_state == + IP_ADDRSTATE_PREFERRED) || + (ha->ip_config.ipv6_addr0_state == + IP_ADDRSTATE_PREFERRED) || + (ha->ip_config.ipv6_addr1_state == + IP_ADDRSTATE_PREFERRED)) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: " + "Preferred IP configured." + " Don't wait!\n", ha->host_no, + __func__)); + ipv6_wait = 0; + } + if (memcmp(&ha->ip_config.ipv6_default_router_addr, + ip_address, IPv6_ADDR_LEN) == 0) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: " + "No Router configured. " + "Don't wait!\n", ha->host_no, + __func__)); + ipv6_wait = 0; + } + if ((ha->ip_config.ipv6_default_router_state == + IPV6_RTRSTATE_MANUAL) && + (ha->ip_config.ipv6_link_local_state == + IP_ADDRSTATE_TENTATIVE) && + (memcmp(&ha->ip_config.ipv6_link_local_addr, + &ha->ip_config.ipv6_default_router_addr, 4) == + 0)) { + DEBUG2(printk("scsi%ld: %s: LinkLocal Router & " + "IP configured. Don't wait!\n", + ha->host_no, __func__)); + ipv6_wait = 0; + } + } + if (ipv4_wait || ipv6_wait) { + DEBUG2(printk("scsi%ld: %s: Wait for additional " + "IP(s) \"", ha->host_no, __func__)); + if (ipv4_wait) + DEBUG2(printk("IPv4 ")); + if (ha->ip_config.ipv6_link_local_state == + IP_ADDRSTATE_ACQUIRING) + DEBUG2(printk("IPv6LinkLocal ")); + if (ha->ip_config.ipv6_addr0_state == + IP_ADDRSTATE_ACQUIRING) + DEBUG2(printk("IPv6Addr0 ")); + if (ha->ip_config.ipv6_addr1_state == + IP_ADDRSTATE_ACQUIRING) + DEBUG2(printk("IPv6Addr1 ")); + DEBUG2(printk("\"\n")); + } + } + + return ipv4_wait|ipv6_wait; +} + +static int qla4_80xx_is_minidump_dma_capable(struct scsi_qla_host *ha, + struct qla4_8xxx_minidump_template_hdr *md_hdr) +{ + int offset = (is_qla8022(ha)) ? QLA8022_TEMPLATE_CAP_OFFSET : + QLA83XX_TEMPLATE_CAP_OFFSET; + int rval = 1; + uint32_t *cap_offset; + + cap_offset = (uint32_t *)((char *)md_hdr + offset); + + if (!(le32_to_cpu(*cap_offset) & BIT_0)) { + ql4_printk(KERN_INFO, ha, "PEX DMA Not supported %d\n", + *cap_offset); + rval = 0; + } + + return rval; +} + +/** + * qla4xxx_alloc_fw_dump - Allocate memory for minidump data. + * @ha: pointer to host adapter structure. + **/ +void qla4xxx_alloc_fw_dump(struct scsi_qla_host *ha) +{ + int status; + uint32_t capture_debug_level; + int hdr_entry_bit, k; + void *md_tmp; + dma_addr_t md_tmp_dma; + struct qla4_8xxx_minidump_template_hdr *md_hdr; + int dma_capable; + + if (ha->fw_dump) { + ql4_printk(KERN_WARNING, ha, + "Firmware dump previously allocated.\n"); + return; + } + + status = qla4xxx_req_template_size(ha); + if (status != QLA_SUCCESS) { + ql4_printk(KERN_INFO, ha, + "scsi%ld: Failed to get template size\n", + ha->host_no); + return; + } + + clear_bit(AF_82XX_FW_DUMPED, &ha->flags); + + /* Allocate memory for saving the template */ + md_tmp = dma_alloc_coherent(&ha->pdev->dev, ha->fw_dump_tmplt_size, + &md_tmp_dma, GFP_KERNEL); + if (!md_tmp) { + ql4_printk(KERN_INFO, ha, + "scsi%ld: Failed to allocate DMA memory\n", + ha->host_no); + return; + } + + /* Request template */ + status = qla4xxx_get_minidump_template(ha, md_tmp_dma); + if (status != QLA_SUCCESS) { + ql4_printk(KERN_INFO, ha, + "scsi%ld: Failed to get minidump template\n", + ha->host_no); + goto alloc_cleanup; + } + + md_hdr = (struct qla4_8xxx_minidump_template_hdr *)md_tmp; + + dma_capable = qla4_80xx_is_minidump_dma_capable(ha, md_hdr); + + capture_debug_level = md_hdr->capture_debug_level; + + /* Get capture mask based on module loadtime setting. */ + if ((ql4xmdcapmask >= 0x3 && ql4xmdcapmask <= 0x7F) || + (ql4xmdcapmask == 0xFF && dma_capable)) { + ha->fw_dump_capture_mask = ql4xmdcapmask; + } else { + if (ql4xmdcapmask == 0xFF) + ql4_printk(KERN_INFO, ha, "Falling back to default capture mask, as PEX DMA is not supported\n"); + ha->fw_dump_capture_mask = capture_debug_level; + } + + md_hdr->driver_capture_mask = ha->fw_dump_capture_mask; + + DEBUG2(ql4_printk(KERN_INFO, ha, "Minimum num of entries = %d\n", + md_hdr->num_of_entries)); + DEBUG2(ql4_printk(KERN_INFO, ha, "Dump template size = %d\n", + ha->fw_dump_tmplt_size)); + DEBUG2(ql4_printk(KERN_INFO, ha, "Selected Capture mask =0x%x\n", + ha->fw_dump_capture_mask)); + + /* Calculate fw_dump_size */ + for (hdr_entry_bit = 0x2, k = 1; (hdr_entry_bit & 0xFF); + hdr_entry_bit <<= 1, k++) { + if (hdr_entry_bit & ha->fw_dump_capture_mask) + ha->fw_dump_size += md_hdr->capture_size_array[k]; + } + + /* Total firmware dump size including command header */ + ha->fw_dump_size += ha->fw_dump_tmplt_size; + ha->fw_dump = vmalloc(ha->fw_dump_size); + if (!ha->fw_dump) + goto alloc_cleanup; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Minidump Template Size = 0x%x KB\n", + ha->fw_dump_tmplt_size)); + DEBUG2(ql4_printk(KERN_INFO, ha, + "Total Minidump size = 0x%x KB\n", ha->fw_dump_size)); + + memcpy(ha->fw_dump, md_tmp, ha->fw_dump_tmplt_size); + ha->fw_dump_tmplt_hdr = ha->fw_dump; + +alloc_cleanup: + dma_free_coherent(&ha->pdev->dev, ha->fw_dump_tmplt_size, + md_tmp, md_tmp_dma); +} + +static int qla4xxx_fw_ready(struct scsi_qla_host *ha) +{ + uint32_t timeout_count; + int ready = 0; + + DEBUG2(ql4_printk(KERN_INFO, ha, "Waiting for Firmware Ready..\n")); + for (timeout_count = ADAPTER_INIT_TOV; timeout_count > 0; + timeout_count--) { + if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags)) + qla4xxx_get_dhcp_ip_address(ha); + + /* Get firmware state. */ + if (qla4xxx_get_firmware_state(ha) != QLA_SUCCESS) { + DEBUG2(printk("scsi%ld: %s: unable to get firmware " + "state\n", ha->host_no, __func__)); + break; + } + + if (ha->firmware_state & FW_STATE_ERROR) { + DEBUG2(printk("scsi%ld: %s: an unrecoverable error has" + " occurred\n", ha->host_no, __func__)); + break; + + } + if (ha->firmware_state & FW_STATE_CONFIG_WAIT) { + /* + * The firmware has not yet been issued an Initialize + * Firmware command, so issue it now. + */ + if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) + break; + + /* Go back and test for ready state - no wait. */ + continue; + } + + if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:" + "AUTOCONNECT in progress\n", + ha->host_no, __func__)); + } + + if (ha->firmware_state & FW_STATE_CONFIGURING_IP) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:" + " CONFIGURING IP\n", + ha->host_no, __func__)); + /* + * Check for link state after 15 secs and if link is + * still DOWN then, cable is unplugged. Ignore "DHCP + * in Progress/CONFIGURING IP" bit to check if firmware + * is in ready state or not after 15 secs. + * This is applicable for both 2.x & 3.x firmware + */ + if (timeout_count <= (ADAPTER_INIT_TOV - 15)) { + if (ha->addl_fw_state & FW_ADDSTATE_LINK_UP) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s:" + " LINK UP (Cable plugged)\n", + ha->host_no, __func__)); + } else if (ha->firmware_state & + (FW_STATE_CONFIGURING_IP | + FW_STATE_READY)) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: " + "LINK DOWN (Cable unplugged)\n", + ha->host_no, __func__)); + ha->firmware_state = FW_STATE_READY; + } + } + } + + if (ha->firmware_state == FW_STATE_READY) { + /* If DHCP IP Addr is available, retrieve it now. */ + if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, + &ha->dpc_flags)) + qla4xxx_get_dhcp_ip_address(ha); + + if (!qla4xxx_wait_for_ip_config(ha) || + timeout_count == 1) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Firmware Ready..\n")); + /* The firmware is ready to process SCSI + commands. */ + DEBUG2(ql4_printk(KERN_INFO, ha, + "scsi%ld: %s: MEDIA TYPE" + " - %s\n", ha->host_no, + __func__, (ha->addl_fw_state & + FW_ADDSTATE_OPTICAL_MEDIA) + != 0 ? "OPTICAL" : "COPPER")); + DEBUG2(ql4_printk(KERN_INFO, ha, + "scsi%ld: %s: DHCPv4 STATE" + " Enabled %s\n", ha->host_no, + __func__, (ha->addl_fw_state & + FW_ADDSTATE_DHCPv4_ENABLED) != 0 ? + "YES" : "NO")); + DEBUG2(ql4_printk(KERN_INFO, ha, + "scsi%ld: %s: LINK %s\n", + ha->host_no, __func__, + (ha->addl_fw_state & + FW_ADDSTATE_LINK_UP) != 0 ? + "UP" : "DOWN")); + DEBUG2(ql4_printk(KERN_INFO, ha, + "scsi%ld: %s: iSNS Service " + "Started %s\n", + ha->host_no, __func__, + (ha->addl_fw_state & + FW_ADDSTATE_ISNS_SVC_ENABLED) != 0 ? + "YES" : "NO")); + + ready = 1; + break; + } + } + DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - " + "seconds expired= %d\n", ha->host_no, __func__, + ha->firmware_state, ha->addl_fw_state, + timeout_count)); + if (is_qla4032(ha) && + !(ha->addl_fw_state & FW_ADDSTATE_LINK_UP) && + (timeout_count < ADAPTER_INIT_TOV - 5)) { + break; + } + + msleep(1000); + } /* end of for */ + + if (timeout_count <= 0) + DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n", + ha->host_no, __func__)); + + if (ha->firmware_state & FW_STATE_CONFIGURING_IP) { + DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting " + "it's waiting to configure an IP address\n", + ha->host_no, __func__)); + ready = 1; + } else if (ha->firmware_state & FW_STATE_WAIT_AUTOCONNECT) { + DEBUG2(printk("scsi%ld: %s: FW initialized, but " + "auto-discovery still in process\n", + ha->host_no, __func__)); + ready = 1; + } + + return ready; +} + +/** + * qla4xxx_init_firmware - initializes the firmware. + * @ha: pointer to host adapter structure. + * + **/ +static int qla4xxx_init_firmware(struct scsi_qla_host *ha) +{ + int status = QLA_ERROR; + + if (is_aer_supported(ha) && + test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags)) + return status; + + /* For 82xx, stop firmware before initializing because if BIOS + * has previously initialized firmware, then driver's initialize + * firmware will fail. */ + if (is_qla80XX(ha)) + qla4_8xxx_stop_firmware(ha); + + ql4_printk(KERN_INFO, ha, "Initializing firmware..\n"); + if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) { + DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware " + "control block\n", ha->host_no, __func__)); + return status; + } + + if (!qla4xxx_fw_ready(ha)) + return status; + + if (is_qla80XX(ha) && !test_bit(AF_INIT_DONE, &ha->flags)) + qla4xxx_alloc_fw_dump(ha); + + return qla4xxx_get_firmware_status(ha); +} + +static void qla4xxx_set_model_info(struct scsi_qla_host *ha) +{ + uint16_t board_id_string[8]; + int i; + int size = sizeof(ha->nvram->isp4022.boardIdStr); + int offset = offsetof(struct eeprom_data, isp4022.boardIdStr) / 2; + + for (i = 0; i < (size / 2) ; i++) { + board_id_string[i] = rd_nvram_word(ha, offset); + offset += 1; + } + + memcpy(ha->model_name, board_id_string, size); +} + +static int qla4xxx_config_nvram(struct scsi_qla_host *ha) +{ + unsigned long flags; + union external_hw_config_reg extHwConfig; + + DEBUG2(printk("scsi%ld: %s: Get EEProm parameters \n", ha->host_no, + __func__)); + if (ql4xxx_lock_flash(ha) != QLA_SUCCESS) + return QLA_ERROR; + if (ql4xxx_lock_nvram(ha) != QLA_SUCCESS) { + ql4xxx_unlock_flash(ha); + return QLA_ERROR; + } + + /* Get EEPRom Parameters from NVRAM and validate */ + ql4_printk(KERN_INFO, ha, "Configuring NVRAM ...\n"); + if (qla4xxx_is_nvram_configuration_valid(ha) == QLA_SUCCESS) { + spin_lock_irqsave(&ha->hardware_lock, flags); + extHwConfig.Asuint32_t = + rd_nvram_word(ha, eeprom_ext_hw_conf_offset(ha)); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + } else { + ql4_printk(KERN_WARNING, ha, + "scsi%ld: %s: EEProm checksum invalid. " + "Please update your EEPROM\n", ha->host_no, + __func__); + + /* Attempt to set defaults */ + if (is_qla4010(ha)) + extHwConfig.Asuint32_t = 0x1912; + else if (is_qla4022(ha) | is_qla4032(ha)) + extHwConfig.Asuint32_t = 0x0023; + else + return QLA_ERROR; + } + + if (is_qla4022(ha) || is_qla4032(ha)) + qla4xxx_set_model_info(ha); + else + strcpy(ha->model_name, "QLA4010"); + + DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n", + ha->host_no, __func__, extHwConfig.Asuint32_t)); + + spin_lock_irqsave(&ha->hardware_lock, flags); + writel((0xFFFF << 16) | extHwConfig.Asuint32_t, isp_ext_hw_conf(ha)); + readl(isp_ext_hw_conf(ha)); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + ql4xxx_unlock_nvram(ha); + ql4xxx_unlock_flash(ha); + + return QLA_SUCCESS; +} + +/** + * qla4_8xxx_pci_config() - Setup ISP82xx PCI configuration registers. + * @ha: HA context + */ +void qla4_8xxx_pci_config(struct scsi_qla_host *ha) +{ + pci_set_master(ha->pdev); +} + +void qla4xxx_pci_config(struct scsi_qla_host *ha) +{ + uint16_t w; + int status; + + ql4_printk(KERN_INFO, ha, "Configuring PCI space...\n"); + + pci_set_master(ha->pdev); + status = pci_set_mwi(ha->pdev); + if (status) + ql4_printk(KERN_WARNING, ha, "Failed to set MWI\n"); + + /* + * We want to respect framework's setting of PCI configuration space + * command register and also want to make sure that all bits of + * interest to us are properly set in command register. + */ + pci_read_config_word(ha->pdev, PCI_COMMAND, &w); + w |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR; + w &= ~PCI_COMMAND_INTX_DISABLE; + pci_write_config_word(ha->pdev, PCI_COMMAND, w); +} + +static int qla4xxx_start_firmware_from_flash(struct scsi_qla_host *ha) +{ + int status = QLA_ERROR; + unsigned long max_wait_time; + unsigned long flags; + uint32_t mbox_status; + + ql4_printk(KERN_INFO, ha, "Starting firmware ...\n"); + + /* + * Start firmware from flash ROM + * + * WORKAROUND: Stuff a non-constant value that the firmware can + * use as a seed for a random number generator in MB7 prior to + * setting BOOT_ENABLE. Fixes problem where the TCP + * connections use the same TCP ports after each reboot, + * causing some connections to not get re-established. + */ + DEBUG(printk("scsi%d: %s: Start firmware from flash ROM\n", + ha->host_no, __func__)); + + spin_lock_irqsave(&ha->hardware_lock, flags); + writel(jiffies, &ha->reg->mailbox[7]); + if (is_qla4022(ha) | is_qla4032(ha)) + writel(set_rmask(NVR_WRITE_ENABLE), + &ha->reg->u1.isp4022.nvram); + + writel(2, &ha->reg->mailbox[6]); + readl(&ha->reg->mailbox[6]); + + writel(set_rmask(CSR_BOOT_ENABLE), &ha->reg->ctrl_status); + readl(&ha->reg->ctrl_status); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Wait for firmware to come UP. */ + DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for " + "boot firmware to complete...\n", + ha->host_no, __func__, FIRMWARE_UP_TOV)); + max_wait_time = jiffies + (FIRMWARE_UP_TOV * HZ); + do { + uint32_t ctrl_status; + + spin_lock_irqsave(&ha->hardware_lock, flags); + ctrl_status = readw(&ha->reg->ctrl_status); + mbox_status = readw(&ha->reg->mailbox[0]); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (ctrl_status & set_rmask(CSR_SCSI_PROCESSOR_INTR)) + break; + if (mbox_status == MBOX_STS_COMMAND_COMPLETE) + break; + + DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot " + "firmware to complete... ctrl_sts=0x%x, remaining=%ld\n", + ha->host_no, __func__, ctrl_status, max_wait_time)); + + msleep_interruptible(250); + } while (!time_after_eq(jiffies, max_wait_time)); + + if (mbox_status == MBOX_STS_COMMAND_COMPLETE) { + DEBUG(printk(KERN_INFO "scsi%ld: %s: Firmware has started\n", + ha->host_no, __func__)); + + spin_lock_irqsave(&ha->hardware_lock, flags); + writel(set_rmask(CSR_SCSI_PROCESSOR_INTR), + &ha->reg->ctrl_status); + readl(&ha->reg->ctrl_status); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + status = QLA_SUCCESS; + } else { + printk(KERN_INFO "scsi%ld: %s: Boot firmware failed " + "- mbox status 0x%x\n", ha->host_no, __func__, + mbox_status); + status = QLA_ERROR; + } + return status; +} + +int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a) +{ +#define QL4_LOCK_DRVR_WAIT 60 +#define QL4_LOCK_DRVR_SLEEP 1 + + int drvr_wait = QL4_LOCK_DRVR_WAIT; + while (drvr_wait) { + if (ql4xxx_lock_drvr(a) == 0) { + ssleep(QL4_LOCK_DRVR_SLEEP); + DEBUG2(printk("scsi%ld: %s: Waiting for " + "Global Init Semaphore(%d)...\n", + a->host_no, + __func__, drvr_wait)); + drvr_wait -= QL4_LOCK_DRVR_SLEEP; + } else { + DEBUG2(printk("scsi%ld: %s: Global Init Semaphore " + "acquired\n", a->host_no, __func__)); + return QLA_SUCCESS; + } + } + return QLA_ERROR; +} + +/** + * qla4xxx_start_firmware - starts qla4xxx firmware + * @ha: Pointer to host adapter structure. + * + * This routine performs the necessary steps to start the firmware for + * the QLA4010 adapter. + **/ +int qla4xxx_start_firmware(struct scsi_qla_host *ha) +{ + unsigned long flags = 0; + uint32_t mbox_status; + int status = QLA_ERROR; + int soft_reset = 1; + int config_chip = 0; + + if (is_qla4022(ha) | is_qla4032(ha)) + ql4xxx_set_mac_number(ha); + + if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS) + return QLA_ERROR; + + spin_lock_irqsave(&ha->hardware_lock, flags); + + DEBUG2(printk("scsi%ld: %s: port_ctrl = 0x%08X\n", ha->host_no, + __func__, readw(isp_port_ctrl(ha)))); + DEBUG(printk("scsi%ld: %s: port_status = 0x%08X\n", ha->host_no, + __func__, readw(isp_port_status(ha)))); + + /* Is Hardware already initialized? */ + if ((readw(isp_port_ctrl(ha)) & 0x8000) != 0) { + DEBUG(printk("scsi%ld: %s: Hardware has already been " + "initialized\n", ha->host_no, __func__)); + + /* Receive firmware boot acknowledgement */ + mbox_status = readw(&ha->reg->mailbox[0]); + + DEBUG2(printk("scsi%ld: %s: H/W Config complete - mbox[0]= " + "0x%x\n", ha->host_no, __func__, mbox_status)); + + /* Is firmware already booted? */ + if (mbox_status == 0) { + /* F/W not running, must be config by net driver */ + config_chip = 1; + soft_reset = 0; + } else { + writel(set_rmask(CSR_SCSI_PROCESSOR_INTR), + &ha->reg->ctrl_status); + readl(&ha->reg->ctrl_status); + writel(set_rmask(CSR_SCSI_COMPLETION_INTR), + &ha->reg->ctrl_status); + readl(&ha->reg->ctrl_status); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + if (qla4xxx_get_firmware_state(ha) == QLA_SUCCESS) { + DEBUG2(printk("scsi%ld: %s: Get firmware " + "state -- state = 0x%x\n", + ha->host_no, + __func__, ha->firmware_state)); + /* F/W is running */ + if (ha->firmware_state & + FW_STATE_CONFIG_WAIT) { + DEBUG2(printk("scsi%ld: %s: Firmware " + "in known state -- " + "config and " + "boot, state = 0x%x\n", + ha->host_no, __func__, + ha->firmware_state)); + config_chip = 1; + soft_reset = 0; + } + } else { + DEBUG2(printk("scsi%ld: %s: Firmware in " + "unknown state -- resetting," + " state = " + "0x%x\n", ha->host_no, __func__, + ha->firmware_state)); + } + spin_lock_irqsave(&ha->hardware_lock, flags); + } + } else { + DEBUG(printk("scsi%ld: %s: H/W initialization hasn't been " + "started - resetting\n", ha->host_no, __func__)); + } + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + DEBUG(printk("scsi%ld: %s: Flags soft_rest=%d, config= %d\n ", + ha->host_no, __func__, soft_reset, config_chip)); + if (soft_reset) { + DEBUG(printk("scsi%ld: %s: Issue Soft Reset\n", ha->host_no, + __func__)); + status = qla4xxx_soft_reset(ha); /* NOTE: acquires drvr + * lock again, but ok */ + if (status == QLA_ERROR) { + DEBUG(printk("scsi%d: %s: Soft Reset failed!\n", + ha->host_no, __func__)); + ql4xxx_unlock_drvr(ha); + return QLA_ERROR; + } + config_chip = 1; + + /* Reset clears the semaphore, so acquire again */ + if (ql4xxx_lock_drvr_wait(ha) != QLA_SUCCESS) + return QLA_ERROR; + } + + if (config_chip) { + if ((status = qla4xxx_config_nvram(ha)) == QLA_SUCCESS) + status = qla4xxx_start_firmware_from_flash(ha); + } + + ql4xxx_unlock_drvr(ha); + if (status == QLA_SUCCESS) { + if (test_and_clear_bit(AF_GET_CRASH_RECORD, &ha->flags)) + qla4xxx_get_crash_record(ha); + + qla4xxx_init_rings(ha); + } else { + DEBUG(printk("scsi%ld: %s: Firmware has NOT started\n", + ha->host_no, __func__)); + } + return status; +} +/** + * qla4xxx_free_ddb_index - Free DDBs reserved by firmware + * @ha: pointer to adapter structure + * + * Since firmware is not running in autoconnect mode the DDB indices should + * be freed so that when login happens from user space there are free DDB + * indices available. + **/ +void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) +{ + int max_ddbs; + int ret; + uint32_t idx = 0, next_idx = 0; + uint32_t state = 0, conn_err = 0; + + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; + + for (idx = 0; idx < max_ddbs; idx = next_idx) { + ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL, + &next_idx, &state, &conn_err, + NULL, NULL); + if (ret == QLA_ERROR) { + next_idx++; + continue; + } + if (state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Freeing DDB index = 0x%x\n", idx)); + ret = qla4xxx_clear_ddb_entry(ha, idx); + if (ret == QLA_ERROR) + ql4_printk(KERN_ERR, ha, + "Unable to clear DDB index = " + "0x%x\n", idx); + } + if (next_idx == 0) + break; + } +} + +/** + * qla4xxx_initialize_adapter - initiailizes hba + * @ha: Pointer to host adapter structure. + * @is_reset: Is this init path or reset path + * + * This routine parforms all of the steps necessary to initialize the adapter. + * + **/ +int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset) +{ + int status = QLA_ERROR; + + ha->eeprom_cmd_data = 0; + + ql4_printk(KERN_INFO, ha, "Configuring PCI space...\n"); + ha->isp_ops->pci_config(ha); + + ha->isp_ops->disable_intrs(ha); + + /* Initialize the Host adapter request/response queues and firmware */ + if (ha->isp_ops->start_firmware(ha) == QLA_ERROR) + goto exit_init_hba; + + /* + * For ISP83XX, mailbox and IOCB interrupts are enabled separately. + * Mailbox interrupts must be enabled prior to issuing any mailbox + * command in order to prevent the possibility of losing interrupts + * while switching from polling to interrupt mode. IOCB interrupts are + * enabled via isp_ops->enable_intrs. + */ + if (is_qla8032(ha) || is_qla8042(ha)) + qla4_83xx_enable_mbox_intrs(ha); + + if (qla4xxx_about_firmware(ha) == QLA_ERROR) + goto exit_init_hba; + + if (ha->isp_ops->get_sys_info(ha) == QLA_ERROR) + goto exit_init_hba; + + qla4xxx_init_local_data(ha); + + status = qla4xxx_init_firmware(ha); + if (status == QLA_ERROR) + goto exit_init_hba; + + if (is_reset == RESET_ADAPTER) + qla4xxx_build_ddb_list(ha, is_reset); + + set_bit(AF_ONLINE, &ha->flags); + +exit_init_hba: + DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no, + status == QLA_ERROR ? "FAILED" : "SUCCEEDED")); + return status; +} + +int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state) +{ + uint32_t old_fw_ddb_device_state; + int status = QLA_ERROR; + + old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state; + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: DDB - old state = 0x%x, new state = 0x%x for " + "index [%d]\n", __func__, + ddb_entry->fw_ddb_device_state, state, fw_ddb_index)); + + ddb_entry->fw_ddb_device_state = state; + + switch (old_fw_ddb_device_state) { + case DDB_DS_LOGIN_IN_PROCESS: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + case DDB_DS_DISCOVERY: + qla4xxx_update_session_conn_param(ha, ddb_entry); + ddb_entry->unblock_sess(ddb_entry->sess); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + case DDB_DS_NO_CONNECTION_ACTIVE: + iscsi_conn_login_event(ddb_entry->conn, + ISCSI_CONN_STATE_FREE); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_ACTIVE: + case DDB_DS_DISCOVERY: + switch (state) { + case DDB_DS_SESSION_FAILED: + /* + * iscsi_session failure will cause userspace to + * stop the connection which in turn would block the + * iscsi_session and start relogin + */ + iscsi_session_failure(ddb_entry->sess->dd_data, + ISCSI_ERR_CONN_FAILED); + status = QLA_SUCCESS; + break; + case DDB_DS_NO_CONNECTION_ACTIVE: + clear_bit(fw_ddb_index, ha->ddb_idx_map); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_FAILED: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + case DDB_DS_DISCOVERY: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + iscsi_session_failure(ddb_entry->sess->dd_data, + ISCSI_ERR_CONN_FAILED); + status = QLA_SUCCESS; + break; + } + break; + default: + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n", + __func__)); + break; + } + return status; +} + +void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry) +{ + /* + * This triggers a relogin. After the relogin_timer + * expires, the relogin gets scheduled. We must wait a + * minimum amount of time since receiving an 0x8014 AEN + * with failed device_state or a logout response before + * we can issue another relogin. + * + * Firmware pads this timeout: (time2wait +1). + * Driver retry to login should be longer than F/W. + * Otherwise F/W will fail + * set_ddb() mbx cmd with 0x4005 since it still + * counting down its time2wait. + */ + atomic_set(&ddb_entry->relogin_timer, 0); + atomic_set(&ddb_entry->retry_relogin_timer, + ddb_entry->default_time2wait + 4); + +} + +int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state) +{ + uint32_t old_fw_ddb_device_state; + int status = QLA_ERROR; + + old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state; + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: DDB - old state = 0x%x, new state = 0x%x for " + "index [%d]\n", __func__, + ddb_entry->fw_ddb_device_state, state, fw_ddb_index)); + + ddb_entry->fw_ddb_device_state = state; + + switch (old_fw_ddb_device_state) { + case DDB_DS_LOGIN_IN_PROCESS: + case DDB_DS_NO_CONNECTION_ACTIVE: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + iscsi_block_session(ddb_entry->sess); + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_ACTIVE: + switch (state) { + case DDB_DS_SESSION_FAILED: + iscsi_block_session(ddb_entry->sess); + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_FAILED: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + default: + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n", + __func__)); + break; + } + return status; +} + +/** + * qla4xxx_process_ddb_changed - process ddb state change + * @ha: Pointer to host adapter structure. + * @fw_ddb_index: Firmware's device database index + * @state: Device state + * @conn_err: Unused + * + * This routine processes a Decive Database Changed AEN Event. + **/ +int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, + uint32_t fw_ddb_index, + uint32_t state, uint32_t conn_err) +{ + struct ddb_entry *ddb_entry; + + /* check for out of range index */ + if (fw_ddb_index >= MAX_DDB_ENTRIES) + goto exit_ddb_event; + + /* Get the corresponging ddb entry */ + ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index); + /* Device does not currently exist in our database. */ + if (ddb_entry == NULL) { + ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n", + __func__, fw_ddb_index); + + if (state == DDB_DS_NO_CONNECTION_ACTIVE) + clear_bit(fw_ddb_index, ha->ddb_idx_map); + + goto exit_ddb_event; + } + + ddb_entry->ddb_change(ha, fw_ddb_index, ddb_entry, state); + +exit_ddb_event: + return QLA_ERROR; +} + +/** + * qla4xxx_login_flash_ddb - Login to target (DDB) + * @cls_session: Pointer to the session to login + * + * This routine logins to the target. + * Issues setddb and conn open mbx + **/ +void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + struct dev_db_entry *fw_ddb_entry = NULL; + dma_addr_t fw_ddb_dma; + uint32_t mbx_sts = 0; + int ret; + + sess = cls_session->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + if (!test_bit(AF_LINK_UP, &ha->flags)) + return; + + if (ddb_entry->ddb_type != FLASH_DDB) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Skipping login to non FLASH DB")); + goto exit_login; + } + + fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, + &fw_ddb_dma); + if (fw_ddb_entry == NULL) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); + goto exit_login; + } + + if (ddb_entry->fw_ddb_index == INVALID_ENTRY) { + ret = qla4xxx_get_ddb_index(ha, &ddb_entry->fw_ddb_index); + if (ret == QLA_ERROR) + goto exit_login; + + ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry; + ha->tot_ddbs++; + } + + memcpy(fw_ddb_entry, &ddb_entry->fw_ddb_entry, + sizeof(struct dev_db_entry)); + ddb_entry->sess->target_id = ddb_entry->fw_ddb_index; + + ret = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, + fw_ddb_dma, &mbx_sts); + if (ret == QLA_ERROR) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Set DDB failed\n")); + goto exit_login; + } + + ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS; + ret = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index); + if (ret == QLA_ERROR) { + ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__, + sess->targetname); + goto exit_login; + } + +exit_login: + if (fw_ddb_entry) + dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); +} + |