Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 513 insertions, 0 deletions

diff --git a/drivers/scsi/snic/snic_fwint.h b/drivers/scsi/snic/snic_fwint.h
new file mode 100644
index 000000000..2550ba964
--- /dev/null
+++ b/drivers/scsi/snic/snic_fwint.h
@@ -0,0 +1,513 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright 2014 Cisco Systems, Inc.  All rights reserved. */
+
+#ifndef __SNIC_FWINT_H
+#define __SNIC_FWINT_H
+
+#define SNIC_CDB_LEN	32	/* SCSI CDB size 32, can be used for 16 bytes */
+#define LUN_ADDR_LEN	8
+
+/*
+ * Command entry type
+ */
+enum snic_io_type {
+	/*
+	 * Initiator request types
+	 */
+	SNIC_REQ_REPORT_TGTS = 0x2,	/* Report Targets */
+	SNIC_REQ_ICMND,			/* Initiator command for SCSI IO */
+	SNIC_REQ_ITMF,			/* Initiator command for Task Mgmt */
+	SNIC_REQ_HBA_RESET,		/* SNIC Reset */
+	SNIC_REQ_EXCH_VER,		/* Exchange Version Information */
+	SNIC_REQ_TGT_INFO,		/* Backend/Target Information */
+	SNIC_REQ_BOOT_LUNS,
+
+	/*
+	 * Response type
+	 */
+	SNIC_RSP_REPORT_TGTS_CMPL = 0x12,/* Report Targets Completion */
+	SNIC_RSP_ICMND_CMPL,		/* SCSI IO Completion */
+	SNIC_RSP_ITMF_CMPL,		/* Task Management Completion */
+	SNIC_RSP_HBA_RESET_CMPL,	/* SNIC Reset Completion */
+	SNIC_RSP_EXCH_VER_CMPL,		/* Exchange Version Completion*/
+	SNIC_RSP_BOOT_LUNS_CMPL,
+
+	/*
+	 * Misc Request types
+	 */
+	SNIC_MSG_ACK = 0x80,		/* Ack: snic_notify_msg */
+	SNIC_MSG_ASYNC_EVNOTIFY,	/* Asynchronous Event Notification */
+}; /* end of enum snic_io_type */
+
+
+/*
+ * Header status codes from firmware
+ */
+enum snic_io_status {
+	SNIC_STAT_IO_SUCCESS = 0,	/* request was successful */
+
+	/*
+	 * If a request to the fw is rejected, the original request header
+	 * will be returned with the status set to one of the following:
+	 */
+	SNIC_STAT_INVALID_HDR,	/* header contains invalid data */
+	SNIC_STAT_OUT_OF_RES,	/* out of resources to complete request */
+	SNIC_STAT_INVALID_PARM,	/* some parameter in request is not valid */
+	SNIC_STAT_REQ_NOT_SUP,	/* req type is not supported */
+	SNIC_STAT_IO_NOT_FOUND,	/* requested IO was not found */
+
+	/*
+	 * Once a request is processed, the fw will usually return
+	 * a cmpl message type. In cases where errors occurred,
+	 * the header status would be filled in with one of the following:
+	 */
+	SNIC_STAT_ABORTED,		/* req was aborted */
+	SNIC_STAT_TIMEOUT,		/* req was timed out */
+	SNIC_STAT_SGL_INVALID,		/* req was aborted due to sgl error */
+	SNIC_STAT_DATA_CNT_MISMATCH,	/*recv/sent more/less data than expec */
+	SNIC_STAT_FW_ERR,		/* req was terminated due to fw error */
+	SNIC_STAT_ITMF_REJECT,		/* itmf req was rejected by target */
+	SNIC_STAT_ITMF_FAIL,		/* itmf req was failed */
+	SNIC_STAT_ITMF_INCORRECT_LUN,	/* itmf req has incorrect LUN id*/
+	SNIC_STAT_CMND_REJECT,		/* req was invalid and rejected */
+	SNIC_STAT_DEV_OFFLINE,		/* req sent to offline device */
+	SNIC_STAT_NO_BOOTLUN,
+	SNIC_STAT_SCSI_ERR,		/* SCSI error returned by Target. */
+	SNIC_STAT_NOT_READY,		/* sNIC Subsystem is not ready */
+	SNIC_STAT_FATAL_ERROR,		/* sNIC is in unrecoverable state */
+}; /* end of enum snic_io_status */
+
+/*
+ * snic_io_hdr : host <--> firmware
+ *
+ * for any other message that will be queued to firmware should
+ *  have the following request header
+ */
+struct snic_io_hdr {
+	__le32	hid;
+	__le32	cmnd_id;	/* tag here */
+	ulong	init_ctx;	/* initiator context */
+	u8	type;		/* request/response type */
+	u8	status;		/* header status entry */
+	u8	protocol;	/* Protocol specific, may needed for RoCE*/
+	u8	flags;
+	__le16	sg_cnt;
+	u16	resvd;
+};
+
+/* auxillary funciton for encoding the snic_io_hdr */
+static inline void
+snic_io_hdr_enc(struct snic_io_hdr *hdr, u8 typ, u8 status, u32 id, u32 hid,
+		u16 sg_cnt, ulong ctx)
+{
+	hdr->type = typ;
+	hdr->status = status;
+	hdr->protocol = 0;
+	hdr->hid = cpu_to_le32(hid);
+	hdr->cmnd_id = cpu_to_le32(id);
+	hdr->sg_cnt = cpu_to_le16(sg_cnt);
+	hdr->init_ctx = ctx;
+	hdr->flags = 0;
+}
+
+/* auxillary funciton for decoding the snic_io_hdr */
+static inline void
+snic_io_hdr_dec(struct snic_io_hdr *hdr, u8 *typ, u8 *stat, u32 *cmnd_id,
+		u32 *hid, ulong *ctx)
+{
+	*typ = hdr->type;
+	*stat = hdr->status;
+	*hid = le32_to_cpu(hdr->hid);
+	*cmnd_id = le32_to_cpu(hdr->cmnd_id);
+	*ctx = hdr->init_ctx;
+}
+
+/*
+ * snic_host_info: host -> firmware
+ *
+ * Used for sending host information to firmware, and request fw version
+ */
+struct snic_exch_ver_req {
+	__le32	drvr_ver;	/* for debugging, when fw dump captured */
+	__le32	os_type;	/* for OS specific features */
+};
+
+/*
+ * os_type flags
+ * Bit 0-7 : OS information
+ * Bit 8-31: Feature/Capability Information
+ */
+#define SNIC_OS_LINUX	0x1
+#define SNIC_OS_WIN	0x2
+#define SNIC_OS_ESX	0x3
+
+/*
+ * HBA Capabilities
+ * Bit 1: Reserved.
+ * Bit 2: Dynamic Discovery of LUNs.
+ * Bit 3: Async event notifications on tgt online/offline events.
+ * Bit 4: IO timeout support in FW.
+ * Bit 5-31: Reserved.
+ */
+#define SNIC_HBA_CAP_DDL	0x02	/* Supports Dynamic Discovery of LUNs */
+#define SNIC_HBA_CAP_AEN	0x04	/* Supports Async Event Noitifcation */
+#define SNIC_HBA_CAP_TMO	0x08	/* Supports IO timeout in FW */
+
+/*
+ * snic_exch_ver_rsp : firmware -> host
+ *
+ * Used by firmware to send response to version request
+ */
+struct snic_exch_ver_rsp {
+	__le32	version;
+	__le32	hid;
+	__le32	max_concur_ios;		/* max concurrent ios */
+	__le32	max_sgs_per_cmd;	/* max sgls per IO */
+	__le32	max_io_sz;		/* max io size supported */
+	__le32	hba_cap;		/* hba capabilities */
+	__le32	max_tgts;		/* max tgts supported */
+	__le16	io_timeout;		/* FW extended timeout */
+	u16	rsvd;
+};
+
+
+/*
+ * snic_report_tgts : host -> firmware request
+ *
+ * Used by the host to request list of targets
+ */
+struct snic_report_tgts {
+	__le16	sg_cnt;
+	__le16	flags;		/* specific flags from fw */
+	u8	_resvd[4];
+	__le64	sg_addr;	/* Points to SGL */
+	__le64	sense_addr;
+};
+
+enum snic_type {
+	SNIC_NONE = 0x0,
+	SNIC_DAS,
+	SNIC_SAN,
+};
+
+
+/* Report Target Response */
+enum snic_tgt_type {
+	SNIC_TGT_NONE = 0x0,
+	SNIC_TGT_DAS,	/* DAS Target */
+	SNIC_TGT_SAN,	/* SAN Target */
+};
+
+/* target id format */
+struct snic_tgt_id {
+	__le32	tgt_id;		/* target id */
+	__le16	tgt_type;	/* tgt type */
+	__le16	vnic_id;	/* corresponding vnic id */
+};
+
+/*
+ * snic_report_tgts_cmpl : firmware -> host response
+ *
+ * Used by firmware to send response to Report Targets request
+ */
+struct snic_report_tgts_cmpl {
+	__le32	tgt_cnt;	/* Number of Targets accessible */
+	u32	_resvd;
+};
+
+/*
+ * Command flags
+ *
+ * Bit 0: Read flags
+ * Bit 1: Write flag
+ * Bit 2: ESGL - sg/esg array contains extended sg
+ *	  ESGE - is a host buffer contains sg elements
+ * Bit 3-4: Task Attributes
+ *		00b - simple
+ *		01b - head of queue
+ *		10b - ordered
+ * Bit 5-7: Priority - future use
+ * Bit 8-15: Reserved
+ */
+
+#define SNIC_ICMND_WR		0x01	/* write command */
+#define SNIC_ICMND_RD		0x02	/* read command */
+#define SNIC_ICMND_ESGL		0x04	/* SGE/ESGE array contains valid data*/
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define SNIC_ICMND_TSK_SHIFT		2	/* task attr starts at bit 2 */
+#define SNIC_ICMND_TSK_MASK(x)		((x>>SNIC_ICMND_TSK_SHIFT) & ~(0xffff))
+#define SNIC_ICMND_TSK_SIMPLE		0	/* simple task attr */
+#define SNIC_ICMND_TSK_HEAD_OF_QUEUE	1	/* head of qeuue task attr */
+#define SNIC_ICMND_TSK_ORDERED		2	/* ordered task attr */
+
+#define SNIC_ICMND_PRI_SHIFT		5	/* prio val starts at bit 5 */
+
+/*
+ * snic_icmnd : host-> firmware request
+ *
+ * used for sending out an initiator SCSI 16/32-byte command
+ */
+struct snic_icmnd {
+	__le16	sg_cnt;		/* Number of SG Elements */
+	__le16	flags;		/* flags */
+	__le32	sense_len;	/* Sense buffer length */
+	__le64	tgt_id;		/* Destination Target ID */
+	__le64	lun_id;		/* Destination LUN ID */
+	u8	cdb_len;
+	u8	_resvd;
+	__le16	time_out;	/* ms time for Res allocations fw to handle io*/
+	__le32	data_len;	/* Total number of bytes to be transferred */
+	u8	cdb[SNIC_CDB_LEN];
+	__le64	sg_addr;	/* Points to SG List */
+	__le64	sense_addr;	/* Sense buffer address */
+};
+
+
+/* Response flags */
+/* Bit 0: Under run
+ * Bit 1: Over Run
+ * Bit 2-7: Reserved
+ */
+#define SNIC_ICMND_CMPL_UNDR_RUN	0x01	/* resid under and valid */
+#define SNIC_ICMND_CMPL_OVER_RUN	0x02	/* resid over and valid */
+
+/*
+ * snic_icmnd_cmpl: firmware -> host response
+ *
+ * Used for sending the host a response to an icmnd (initiator command)
+ */
+struct snic_icmnd_cmpl {
+	u8	scsi_status;	/* value as per SAM */
+	u8	flags;
+	__le16	sense_len;	/* Sense Length */
+	__le32	resid;		/* Residue : # bytes under or over run */
+};
+
+/*
+ * snic_itmf: host->firmware request
+ *
+ * used for requesting the firmware to abort a request and/or send out
+ * a task management function
+ *
+ * the req_id field is valid in case of abort task and clear task
+ */
+struct snic_itmf {
+	u8	tm_type;	/* SCSI Task Management request */
+	u8	resvd;
+	__le16	flags;		/* flags */
+	__le32	req_id;		/* Command id of snic req to be aborted */
+	__le64	tgt_id;		/* Target ID */
+	__le64	lun_id;		/* Destination LUN ID */
+	__le16	timeout;	/* in sec */
+};
+
+/*
+ * Task Management Request
+ */
+enum snic_itmf_tm_type {
+	SNIC_ITMF_ABTS_TASK = 0x01,	/* Abort Task */
+	SNIC_ITMF_ABTS_TASK_SET,	/* Abort Task Set */
+	SNIC_ITMF_CLR_TASK,		/* Clear Task */
+	SNIC_ITMF_CLR_TASKSET,		/* Clear Task Set */
+	SNIC_ITMF_LUN_RESET,		/* Lun Reset */
+	SNIC_ITMF_ABTS_TASK_TERM,	/* Supported for SAN Targets */
+};
+
+/*
+ * snic_itmf_cmpl: firmware -> host resposne
+ *
+ * used for sending the host a response for a itmf request
+ */
+struct snic_itmf_cmpl {
+	__le32	nterminated;	/* # IOs terminated as a result of tmf */
+	u8	flags;		/* flags */
+	u8	_resvd[3];
+};
+
+/*
+ * itmfl_cmpl flags
+ * Bit 0 : 1 - Num terminated field valid
+ * Bit 1 - 7 : Reserved
+ */
+#define SNIC_NUM_TERM_VALID	0x01	/* Number of IOs terminated */
+
+/*
+ * snic_hba_reset: host -> firmware request
+ *
+ * used for requesting firmware to reset snic
+ */
+struct snic_hba_reset {
+	__le16	flags;		/* flags */
+	u8	_resvd[6];
+};
+
+/*
+ * snic_hba_reset_cmpl: firmware -> host response
+ *
+ * Used by firmware to respond to the host's hba reset request
+ */
+struct snic_hba_reset_cmpl {
+	u8	flags;		/* flags : more info needs to be added*/
+	u8	_resvd[7];
+};
+
+/*
+ * snic_notify_msg: firmware -> host response
+ *
+ * Used by firmware to notify host of the last work queue entry received
+ */
+struct snic_notify_msg {
+	__le32	wqe_num;	/* wq entry number */
+	u8	flags;		/* flags, macros */
+	u8	_resvd[4];
+};
+
+
+#define SNIC_EVDATA_LEN		24	/* in bytes */
+/* snic_async_evnotify: firmware -> host notification
+ *
+ * Used by firmware to notify the host about configuration/state changes
+ */
+struct snic_async_evnotify {
+	u8	FLS_EVENT_DESC;
+	u8	vnic;			/* vnic id */
+	u8	_resvd[2];
+	__le32	ev_id;			/* Event ID */
+	u8	ev_data[SNIC_EVDATA_LEN]; /* Event Data */
+	u8	_resvd2[4];
+};
+
+/* async event flags */
+enum snic_ev_type {
+	SNIC_EV_TGT_OFFLINE = 0x01, /* Target Offline, PL contains TGT ID */
+	SNIC_EV_TGT_ONLINE,	/* Target Online, PL contains TGT ID */
+	SNIC_EV_LUN_OFFLINE,	/* LUN Offline, PL contains LUN ID */
+	SNIC_EV_LUN_ONLINE,	/* LUN Online, PL contains LUN ID */
+	SNIC_EV_CONF_CHG,	/* Dev Config/Attr Change Event */
+	SNIC_EV_TGT_ADDED,	/* Target Added */
+	SNIC_EV_TGT_DELTD,	/* Target Del'd, PL contains TGT ID */
+	SNIC_EV_LUN_ADDED,	/* LUN Added */
+	SNIC_EV_LUN_DELTD,	/* LUN Del'd, PL cont. TGT & LUN ID */
+
+	SNIC_EV_DISC_CMPL = 0x10, /* Discovery Completed Event */
+};
+
+
+#define SNIC_HOST_REQ_LEN	128	/*Exp length of host req, wq desc sz*/
+/* Payload 88 bytes = 128 - 24 - 16 */
+#define SNIC_HOST_REQ_PAYLOAD	((int)(SNIC_HOST_REQ_LEN -		\
+					sizeof(struct snic_io_hdr) -	\
+					(2 * sizeof(u64)) - sizeof(ulong)))
+
+/*
+ * snic_host_req: host -> firmware request
+ *
+ * Basic structure for all snic requests that are sent from the host to
+ * firmware. They are 128 bytes in size.
+ */
+struct snic_host_req {
+	u64	ctrl_data[2];	/*16 bytes - Control Data */
+	struct snic_io_hdr hdr;
+	union {
+		/*
+		 * Entry specific space, last byte contains color
+		 */
+		u8	buf[SNIC_HOST_REQ_PAYLOAD];
+
+		/*
+		 * Exchange firmware version
+		 */
+		struct snic_exch_ver_req	exch_ver;
+
+		/* report targets */
+		struct snic_report_tgts		rpt_tgts;
+
+		/* io request */
+		struct snic_icmnd		icmnd;
+
+		/* task management request */
+		struct snic_itmf		itmf;
+
+		/* hba reset */
+		struct snic_hba_reset		reset;
+	} u;
+
+	ulong req_pa;
+}; /* end of snic_host_req structure */
+
+
+#define SNIC_FW_REQ_LEN		64 /* Expected length of fw req */
+struct snic_fw_req {
+	struct snic_io_hdr hdr;
+	union {
+		/*
+		 * Entry specific space, last byte contains color
+		 */
+		u8	buf[SNIC_FW_REQ_LEN - sizeof(struct snic_io_hdr)];
+
+		/* Exchange Version Response */
+		struct snic_exch_ver_rsp	exch_ver_cmpl;
+
+		/* Report Targets Response */
+		struct snic_report_tgts_cmpl	rpt_tgts_cmpl;
+
+		/* scsi response */
+		struct snic_icmnd_cmpl		icmnd_cmpl;
+
+		/* task management response */
+		struct snic_itmf_cmpl		itmf_cmpl;
+
+		/* hba reset response */
+		struct snic_hba_reset_cmpl	reset_cmpl;
+
+		/* notify message */
+		struct snic_notify_msg		ack;
+
+		/* async notification event */
+		struct snic_async_evnotify	async_ev;
+
+	} u;
+}; /* end of snic_fw_req structure */
+
+/*
+ * Auxillary macro to verify specific snic req/cmpl structures
+ * to ensure that it will be aligned to 64 bit, and not using
+ * color bit field
+ */
+#define VERIFY_REQ_SZ(x)
+#define VERIFY_CMPL_SZ(x)
+
+/*
+ * Access routines to encode and decode the color bit, which is the most
+ * significant bit of the structure.
+ */
+static inline void
+snic_color_enc(struct snic_fw_req *req, u8 color)
+{
+	u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1;
+
+	if (color)
+		*c |= 0x80;
+	else
+		*c &= ~0x80;
+}
+
+static inline void
+snic_color_dec(struct snic_fw_req *req, u8 *color)
+{
+	u8 *c = ((u8 *) req) + sizeof(struct snic_fw_req) - 1;
+
+	*color = *c >> 7;
+
+	/* Make sure color bit is read from desc *before* other fields
+	 * are read from desc. Hardware guarantees color bit is last
+	 * bit (byte) written. Adding the rmb() prevents the compiler
+	 * and/or CPU from reordering the reads which would potentially
+	 * result in reading stale values.
+	 */
+	rmb();
+}
+#endif /* end of __SNIC_FWINT_H */