diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/staging/fbtft | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/staging/fbtft')
43 files changed, 9489 insertions, 0 deletions
diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig new file mode 100644 index 000000000..4d29e8c10 --- /dev/null +++ b/drivers/staging/fbtft/Kconfig @@ -0,0 +1,202 @@ +# SPDX-License-Identifier: GPL-2.0 +menuconfig FB_TFT + tristate "Support for small TFT LCD display modules" + depends on FB && SPI + depends on GPIOLIB || COMPILE_TEST + select FB_SYS_FILLRECT + select FB_SYS_COPYAREA + select FB_SYS_IMAGEBLIT + select FB_SYS_FOPS + select FB_DEFERRED_IO + select FB_BACKLIGHT + +config FB_TFT_AGM1264K_FL + tristate "FB driver for the AGM1264K-FL LCD display" + depends on FB_TFT + help + Framebuffer support for the AGM1264K-FL LCD display (two Samsung KS0108 compatible chips) + +config FB_TFT_BD663474 + tristate "FB driver for the BD663474 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for BD663474 + +config FB_TFT_HX8340BN + tristate "FB driver for the HX8340BN LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for HX8340BN + +config FB_TFT_HX8347D + tristate "FB driver for the HX8347D LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for HX8347D + +config FB_TFT_HX8353D + tristate "FB driver for the HX8353D LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for HX8353D + +config FB_TFT_HX8357D + tristate "FB driver for the HX8357D LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for HX8357D + +config FB_TFT_ILI9163 + tristate "FB driver for the ILI9163 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for ILI9163 + +config FB_TFT_ILI9320 + tristate "FB driver for the ILI9320 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for ILI9320 + +config FB_TFT_ILI9325 + tristate "FB driver for the ILI9325 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for ILI9325 + +config FB_TFT_ILI9340 + tristate "FB driver for the ILI9340 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for ILI9340 + +config FB_TFT_ILI9341 + tristate "FB driver for the ILI9341 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for ILI9341 + +config FB_TFT_ILI9481 + tristate "FB driver for the ILI9481 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for ILI9481 + +config FB_TFT_ILI9486 + tristate "FB driver for the ILI9486 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for ILI9486 + +config FB_TFT_PCD8544 + tristate "FB driver for the PCD8544 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for PCD8544 + +config FB_TFT_RA8875 + tristate "FB driver for the RA8875 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for RA8875 + +config FB_TFT_S6D02A1 + tristate "FB driver for the S6D02A1 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for S6D02A1 + +config FB_TFT_S6D1121 + tristate "FB driver for the S6D1211 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for S6D1121 + +config FB_TFT_SEPS525 + tristate "FB driver for the SEPS525 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for SEPS525 + Say Y if you have such a display that utilizes this controller. + +config FB_TFT_SH1106 + tristate "FB driver for the SH1106 OLED Controller" + depends on FB_TFT + help + Framebuffer support for SH1106 + +config FB_TFT_SSD1289 + tristate "FB driver for the SSD1289 LCD Controller" + depends on FB_TFT + help + Framebuffer support for SSD1289 + +config FB_TFT_SSD1305 + tristate "FB driver for the SSD1305 OLED Controller" + depends on FB_TFT + help + Framebuffer support for SSD1305 + +config FB_TFT_SSD1306 + tristate "FB driver for the SSD1306 OLED Controller" + depends on FB_TFT + help + Framebuffer support for SSD1306 + +config FB_TFT_SSD1331 + tristate "FB driver for the SSD1331 LCD Controller" + depends on FB_TFT + help + Framebuffer support for SSD1331 + +config FB_TFT_SSD1351 + tristate "FB driver for the SSD1351 LCD Controller" + depends on FB_TFT + help + Framebuffer support for SSD1351 + +config FB_TFT_ST7735R + tristate "FB driver for the ST7735R LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for ST7735R + +config FB_TFT_ST7789V + tristate "FB driver for the ST7789V LCD Controller" + depends on FB_TFT + help + This enables generic framebuffer support for the Sitronix ST7789V + display controller. The controller is intended for small color + displays with a resolution of up to 320x240 pixels. + + Say Y if you have such a display that utilizes this controller. + +config FB_TFT_TINYLCD + tristate "FB driver for tinylcd.com display" + depends on FB_TFT + help + Custom Framebuffer support for tinylcd.com display + +config FB_TFT_TLS8204 + tristate "FB driver for the TLS8204 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for TLS8204 + +config FB_TFT_UC1611 + tristate "FB driver for the UC1611 LCD controller" + depends on FB_TFT + help + Generic Framebuffer support for UC1611 + +config FB_TFT_UC1701 + tristate "FB driver for the UC1701 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for UC1701 + +config FB_TFT_UPD161704 + tristate "FB driver for the uPD161704 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for uPD161704 diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile new file mode 100644 index 000000000..e9cdf0f0a --- /dev/null +++ b/drivers/staging/fbtft/Makefile @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 +# Core module +obj-$(CONFIG_FB_TFT) += fbtft.o +fbtft-y += fbtft-core.o fbtft-sysfs.o fbtft-bus.o fbtft-io.o + +# drivers +obj-$(CONFIG_FB_TFT_AGM1264K_FL) += fb_agm1264k-fl.o +obj-$(CONFIG_FB_TFT_BD663474) += fb_bd663474.o +obj-$(CONFIG_FB_TFT_HX8340BN) += fb_hx8340bn.o +obj-$(CONFIG_FB_TFT_HX8347D) += fb_hx8347d.o +obj-$(CONFIG_FB_TFT_HX8353D) += fb_hx8353d.o +obj-$(CONFIG_FB_TFT_HX8357D) += fb_hx8357d.o +obj-$(CONFIG_FB_TFT_ILI9163) += fb_ili9163.o +obj-$(CONFIG_FB_TFT_ILI9320) += fb_ili9320.o +obj-$(CONFIG_FB_TFT_ILI9325) += fb_ili9325.o +obj-$(CONFIG_FB_TFT_ILI9340) += fb_ili9340.o +obj-$(CONFIG_FB_TFT_ILI9341) += fb_ili9341.o +obj-$(CONFIG_FB_TFT_ILI9481) += fb_ili9481.o +obj-$(CONFIG_FB_TFT_ILI9486) += fb_ili9486.o +obj-$(CONFIG_FB_TFT_PCD8544) += fb_pcd8544.o +obj-$(CONFIG_FB_TFT_RA8875) += fb_ra8875.o +obj-$(CONFIG_FB_TFT_S6D02A1) += fb_s6d02a1.o +obj-$(CONFIG_FB_TFT_S6D1121) += fb_s6d1121.o +obj-$(CONFIG_FB_TFT_SEPS525) += fb_seps525.o +obj-$(CONFIG_FB_TFT_SH1106) += fb_sh1106.o +obj-$(CONFIG_FB_TFT_SSD1289) += fb_ssd1289.o +obj-$(CONFIG_FB_TFT_SSD1305) += fb_ssd1305.o +obj-$(CONFIG_FB_TFT_SSD1306) += fb_ssd1306.o +obj-$(CONFIG_FB_TFT_SSD1305) += fb_ssd1325.o +obj-$(CONFIG_FB_TFT_SSD1331) += fb_ssd1331.o +obj-$(CONFIG_FB_TFT_SSD1351) += fb_ssd1351.o +obj-$(CONFIG_FB_TFT_ST7735R) += fb_st7735r.o +obj-$(CONFIG_FB_TFT_ST7789V) += fb_st7789v.o +obj-$(CONFIG_FB_TFT_TINYLCD) += fb_tinylcd.o +obj-$(CONFIG_FB_TFT_TLS8204) += fb_tls8204.o +obj-$(CONFIG_FB_TFT_UC1611) += fb_uc1611.o +obj-$(CONFIG_FB_TFT_UC1701) += fb_uc1701.o +obj-$(CONFIG_FB_TFT_UPD161704) += fb_upd161704.o diff --git a/drivers/staging/fbtft/README b/drivers/staging/fbtft/README new file mode 100644 index 000000000..ba4c74c92 --- /dev/null +++ b/drivers/staging/fbtft/README @@ -0,0 +1,32 @@ + FBTFT +========= + +Linux Framebuffer drivers for small TFT LCD display modules. +The module 'fbtft' makes writing drivers for some of these displays very easy. + +Development is done on a Raspberry Pi running the Raspbian "wheezy" distribution. + +INSTALLATION + Download kernel sources + + From Linux 3.15 + cd drivers/video/fbdev/fbtft + git clone https://github.com/notro/fbtft.git + + Add to drivers/video/fbdev/Kconfig: source "drivers/video/fbdev/fbtft/Kconfig" + Add to drivers/video/fbdev/Makefile: obj-y += fbtft/ + + Before Linux 3.15 + cd drivers/video + git clone https://github.com/notro/fbtft.git + + Add to drivers/video/Kconfig: source "drivers/video/fbtft/Kconfig" + Add to drivers/video/Makefile: obj-y += fbtft/ + + Enable driver(s) in menuconfig and build the kernel + + +See wiki for more information: https://github.com/notro/fbtft/wiki + + +Source: https://github.com/notro/fbtft/ diff --git a/drivers/staging/fbtft/TODO b/drivers/staging/fbtft/TODO new file mode 100644 index 000000000..e72a08bf2 --- /dev/null +++ b/drivers/staging/fbtft/TODO @@ -0,0 +1,3 @@ +* convert all these over to drm_simple_display_pipe and submit for inclusion + into the DRM subsystem under drivers/gpu/drm - fbdev doesn't take any new + drivers anymore. diff --git a/drivers/staging/fbtft/fb_agm1264k-fl.c b/drivers/staging/fbtft/fb_agm1264k-fl.c new file mode 100644 index 000000000..207d57854 --- /dev/null +++ b/drivers/staging/fbtft/fb_agm1264k-fl.c @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for Two KS0108 LCD controllers in AGM1264K-FL display + * + * Copyright (C) 2014 ololoshka2871 + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio/consumer.h> +#include <linux/delay.h> +#include <linux/slab.h> + +#include "fbtft.h" + +/* Uncomment text line to use negative image on display */ +/*#define NEGATIVE*/ + +#define WHITE 0xff +#define BLACK 0 + +#define DRVNAME "fb_agm1264k-fl" +#define WIDTH 64 +#define HEIGHT 64 +#define TOTALWIDTH (WIDTH * 2) /* because 2 x ks0108 in one display */ +#define FPS 20 + +#define EPIN gpio.wr +#define RS gpio.dc +#define RW gpio.aux[2] +#define CS0 gpio.aux[0] +#define CS1 gpio.aux[1] + +/* diffusing error (Floyd-Steinberg) */ +#define DIFFUSING_MATRIX_WIDTH 2 +#define DIFFUSING_MATRIX_HEIGHT 2 + +static const signed char +diffusing_matrix[DIFFUSING_MATRIX_WIDTH][DIFFUSING_MATRIX_HEIGHT] = { + {-1, 3}, + {3, 2}, +}; + +static const unsigned char gamma_correction_table[] = { +0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, +1, 1, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 6, +6, 6, 6, 7, 7, 7, 8, 8, 8, 9, 9, 9, 10, 10, 11, 11, 11, 12, 12, 13, +13, 13, 14, 14, 15, 15, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, +22, 22, 23, 23, 24, 25, 25, 26, 26, 27, 28, 28, 29, 30, 30, 31, 32, +33, 33, 34, 35, 35, 36, 37, 38, 39, 39, 40, 41, 42, 43, 43, 44, 45, +46, 47, 48, 49, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, +62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 73, 74, 75, 76, 77, 78, 79, 81, +82, 83, 84, 85, 87, 88, 89, 90, 91, 93, 94, 95, 97, 98, 99, 100, 102, +103, 105, 106, 107, 109, 110, 111, 113, 114, 116, 117, 119, 120, 121, +123, 124, 126, 127, 129, 130, 132, 133, 135, 137, 138, 140, 141, 143, +145, 146, 148, 149, 151, 153, 154, 156, 158, 159, 161, 163, 165, 166, +168, 170, 172, 173, 175, 177, 179, 181, 182, 184, 186, 188, 190, 192, +194, 196, 197, 199, 201, 203, 205, 207, 209, 211, 213, 215, 217, 219, +221, 223, 225, 227, 229, 231, 234, 236, 238, 240, 242, 244, 246, 248, +251, 253, 255 +}; + +static int init_display(struct fbtft_par *par) +{ + u8 i; + + par->fbtftops.reset(par); + + for (i = 0; i < 2; ++i) { + write_reg(par, i, 0x3f); /* display on */ + write_reg(par, i, 0x40); /* set x to 0 */ + write_reg(par, i, 0xb0); /* set page to 0 */ + write_reg(par, i, 0xc0); /* set start line to 0 */ + } + + return 0; +} + +/* Check if all necessary GPIOS defined */ +static int verify_gpios(struct fbtft_par *par) +{ + int i; + + dev_dbg(par->info->device, + "%s()\n", __func__); + + if (!par->EPIN) { + dev_err(par->info->device, + "Missing info about 'wr' (aka E) gpio. Aborting.\n"); + return -EINVAL; + } + for (i = 0; i < 8; ++i) { + if (!par->gpio.db[i]) { + dev_err(par->info->device, + "Missing info about 'db[%i]' gpio. Aborting.\n", + i); + return -EINVAL; + } + } + if (!par->CS0) { + dev_err(par->info->device, + "Missing info about 'cs0' gpio. Aborting.\n"); + return -EINVAL; + } + if (!par->CS1) { + dev_err(par->info->device, + "Missing info about 'cs1' gpio. Aborting.\n"); + return -EINVAL; + } + if (!par->RW) { + dev_err(par->info->device, + "Missing info about 'rw' gpio. Aborting.\n"); + return -EINVAL; + } + + return 0; +} + +static unsigned long +request_gpios_match(struct fbtft_par *par, const struct fbtft_gpio *gpio) +{ + dev_dbg(par->info->device, + "%s('%s')\n", __func__, gpio->name); + + if (strcasecmp(gpio->name, "wr") == 0) { + /* left ks0108 E pin */ + par->EPIN = gpio->gpio; + return GPIOD_OUT_LOW; + } else if (strcasecmp(gpio->name, "cs0") == 0) { + /* left ks0108 controller pin */ + par->CS0 = gpio->gpio; + return GPIOD_OUT_HIGH; + } else if (strcasecmp(gpio->name, "cs1") == 0) { + /* right ks0108 controller pin */ + par->CS1 = gpio->gpio; + return GPIOD_OUT_HIGH; + } + + /* if write (rw = 0) e(1->0) perform write */ + /* if read (rw = 1) e(0->1) set data on D0-7*/ + else if (strcasecmp(gpio->name, "rw") == 0) { + par->RW = gpio->gpio; + return GPIOD_OUT_LOW; + } + + return FBTFT_GPIO_NO_MATCH; +} + +/* This function oses to enter commands + * first byte - destination controller 0 or 1 + * following - commands + */ +static void write_reg8_bus8(struct fbtft_par *par, int len, ...) +{ + va_list args; + int i, ret; + u8 *buf = par->buf; + + if (unlikely(par->debug & DEBUG_WRITE_REGISTER)) { + va_start(args, len); + for (i = 0; i < len; i++) + buf[i] = (u8)va_arg(args, unsigned int); + + va_end(args); + fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par, par->info->device, + u8, buf, len, "%s: ", __func__); +} + + va_start(args, len); + + *buf = (u8)va_arg(args, unsigned int); + + if (*buf > 1) { + va_end(args); + dev_err(par->info->device, + "Incorrect chip select request (%d)\n", *buf); + return; + } + + /* select chip */ + if (*buf) { + /* cs1 */ + gpiod_set_value(par->CS0, 0); + gpiod_set_value(par->CS1, 1); + } else { + /* cs0 */ + gpiod_set_value(par->CS0, 1); + gpiod_set_value(par->CS1, 0); + } + + gpiod_set_value(par->RS, 0); /* RS->0 (command mode) */ + len--; + + if (len) { + i = len; + while (i--) + *buf++ = (u8)va_arg(args, unsigned int); + ret = par->fbtftops.write(par, par->buf, len * (sizeof(u8))); + if (ret < 0) { + va_end(args); + dev_err(par->info->device, + "write() failed and returned %d\n", ret); + return; + } + } + + va_end(args); +} + +static struct +{ + int xs, ys_page, xe, ye_page; +} addr_win; + +/* save display writing zone */ +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + addr_win.xs = xs; + addr_win.ys_page = ys / 8; + addr_win.xe = xe; + addr_win.ye_page = ye / 8; +} + +static void +construct_line_bitmap(struct fbtft_par *par, u8 *dest, signed short *src, + int xs, int xe, int y) +{ + int x, i; + + for (x = xs; x < xe; ++x) { + u8 res = 0; + + for (i = 0; i < 8; i++) + if (src[(y * 8 + i) * par->info->var.xres + x]) + res |= 1 << i; +#ifdef NEGATIVE + *dest++ = res; +#else + *dest++ = ~res; +#endif + } +} + +static void iterate_diffusion_matrix(u32 xres, u32 yres, int x, + int y, signed short *convert_buf, + signed short pixel, signed short error) +{ + u16 i, j; + + /* diffusion matrix row */ + for (i = 0; i < DIFFUSING_MATRIX_WIDTH; ++i) + /* diffusion matrix column */ + for (j = 0; j < DIFFUSING_MATRIX_HEIGHT; ++j) { + signed short *write_pos; + signed char coeff; + + /* skip pixels out of zone */ + if (x + i < 0 || x + i >= xres || y + j >= yres) + continue; + write_pos = &convert_buf[(y + j) * xres + x + i]; + coeff = diffusing_matrix[i][j]; + if (-1 == coeff) { + /* pixel itself */ + *write_pos = pixel; + } else { + signed short p = *write_pos + error * coeff; + + if (p > WHITE) + p = WHITE; + if (p < BLACK) + p = BLACK; + *write_pos = p; + } + } +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16 = (u16 *)par->info->screen_buffer; + u8 *buf = par->txbuf.buf; + int x, y; + int ret = 0; + + /* buffer to convert RGB565 -> grayscale16 -> Dithered image 1bpp */ + signed short *convert_buf = kmalloc_array(par->info->var.xres * + par->info->var.yres, sizeof(signed short), GFP_NOIO); + + if (!convert_buf) + return -ENOMEM; + + /* converting to grayscale16 */ + for (x = 0; x < par->info->var.xres; ++x) + for (y = 0; y < par->info->var.yres; ++y) { + u16 pixel = vmem16[y * par->info->var.xres + x]; + u16 b = pixel & 0x1f; + u16 g = (pixel & (0x3f << 5)) >> 5; + u16 r = (pixel & (0x1f << (5 + 6))) >> (5 + 6); + + pixel = (299 * r + 587 * g + 114 * b) / 200; + if (pixel > 255) + pixel = 255; + + /* gamma-correction by table */ + convert_buf[y * par->info->var.xres + x] = + (signed short)gamma_correction_table[pixel]; + } + + /* Image Dithering */ + for (x = 0; x < par->info->var.xres; ++x) + for (y = 0; y < par->info->var.yres; ++y) { + signed short pixel = + convert_buf[y * par->info->var.xres + x]; + signed short error_b = pixel - BLACK; + signed short error_w = pixel - WHITE; + signed short error; + + /* what color close? */ + if (abs(error_b) >= abs(error_w)) { + /* white */ + error = error_w; + pixel = 0xff; + } else { + /* black */ + error = error_b; + pixel = 0; + } + + error /= 8; + + iterate_diffusion_matrix(par->info->var.xres, + par->info->var.yres, + x, y, convert_buf, + pixel, error); + } + + /* 1 string = 2 pages */ + for (y = addr_win.ys_page; y <= addr_win.ye_page; ++y) { + /* left half of display */ + if (addr_win.xs < par->info->var.xres / 2) { + construct_line_bitmap(par, buf, convert_buf, + addr_win.xs, + par->info->var.xres / 2, y); + + len = par->info->var.xres / 2 - addr_win.xs; + + /* select left side (sc0) + * set addr + */ + write_reg(par, 0x00, BIT(6) | (u8)addr_win.xs); + write_reg(par, 0x00, (0x17 << 3) | (u8)y); + + /* write bitmap */ + gpiod_set_value(par->RS, 1); /* RS->1 (data mode) */ + ret = par->fbtftops.write(par, buf, len); + if (ret < 0) + dev_err(par->info->device, + "write failed and returned: %d\n", + ret); + } + /* right half of display */ + if (addr_win.xe >= par->info->var.xres / 2) { + construct_line_bitmap(par, buf, + convert_buf, + par->info->var.xres / 2, + addr_win.xe + 1, y); + + len = addr_win.xe + 1 - par->info->var.xres / 2; + + /* select right side (sc1) + * set addr + */ + write_reg(par, 0x01, BIT(6)); + write_reg(par, 0x01, (0x17 << 3) | (u8)y); + + /* write bitmap */ + gpiod_set_value(par->RS, 1); /* RS->1 (data mode) */ + par->fbtftops.write(par, buf, len); + if (ret < 0) + dev_err(par->info->device, + "write failed and returned: %d\n", + ret); + } + } + kfree(convert_buf); + + gpiod_set_value(par->CS0, 0); + gpiod_set_value(par->CS1, 0); + + return ret; +} + +static int write(struct fbtft_par *par, void *buf, size_t len) +{ + fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len, + "%s(len=%zu): ", __func__, len); + + gpiod_set_value(par->RW, 0); /* set write mode */ + + while (len--) { + u8 i, data; + + data = *(u8 *)buf++; + + /* set data bus */ + for (i = 0; i < 8; ++i) + gpiod_set_value(par->gpio.db[i], data & (1 << i)); + /* set E */ + gpiod_set_value(par->EPIN, 0); + udelay(5); + /* unset E - write */ + gpiod_set_value(par->EPIN, 1); + udelay(1); + } + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = TOTALWIDTH, + .height = HEIGHT, + .fps = FPS, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .verify_gpios = verify_gpios, + .request_gpios_match = request_gpios_match, + .write = write, + .write_register = write_reg8_bus8, + .write_vmem = write_vmem, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "displaytronic,fb_agm1264k-fl", &display); + +MODULE_ALIAS("platform:" DRVNAME); + +MODULE_DESCRIPTION("Two KS0108 LCD controllers in AGM1264K-FL display"); +MODULE_AUTHOR("ololoshka2871"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_bd663474.c b/drivers/staging/fbtft/fb_bd663474.c new file mode 100644 index 000000000..1629c2c44 --- /dev/null +++ b/drivers/staging/fbtft/fb_bd663474.c @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the uPD161704 LCD Controller + * + * Copyright (C) 2014 Seong-Woo Kim + * + * Based on fb_ili9325.c by Noralf Tronnes + * Based on ili9325.c by Jeroen Domburg + * Init code from UTFT library by Henning Karlsen + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_bd663474" +#define WIDTH 240 +#define HEIGHT 320 +#define BPP 16 + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* Initialization sequence from Lib_UTFT */ + + /* oscillator start */ + write_reg(par, 0x000, 0x0001); /*oscillator 0: stop, 1: operation */ + mdelay(10); + + /* Power settings */ + write_reg(par, 0x100, 0x0000); /* power supply setup */ + write_reg(par, 0x101, 0x0000); + write_reg(par, 0x102, 0x3110); + write_reg(par, 0x103, 0xe200); + write_reg(par, 0x110, 0x009d); + write_reg(par, 0x111, 0x0022); + write_reg(par, 0x100, 0x0120); + mdelay(20); + + write_reg(par, 0x100, 0x3120); + mdelay(80); + /* Display control */ + write_reg(par, 0x001, 0x0100); + write_reg(par, 0x002, 0x0000); + write_reg(par, 0x003, 0x1230); + write_reg(par, 0x006, 0x0000); + write_reg(par, 0x007, 0x0101); + write_reg(par, 0x008, 0x0808); + write_reg(par, 0x009, 0x0000); + write_reg(par, 0x00b, 0x0000); + write_reg(par, 0x00c, 0x0000); + write_reg(par, 0x00d, 0x0018); + /* LTPS control settings */ + write_reg(par, 0x012, 0x0000); + write_reg(par, 0x013, 0x0000); + write_reg(par, 0x018, 0x0000); + write_reg(par, 0x019, 0x0000); + + write_reg(par, 0x203, 0x0000); + write_reg(par, 0x204, 0x0000); + + write_reg(par, 0x210, 0x0000); + write_reg(par, 0x211, 0x00ef); + write_reg(par, 0x212, 0x0000); + write_reg(par, 0x213, 0x013f); + write_reg(par, 0x214, 0x0000); + write_reg(par, 0x215, 0x0000); + write_reg(par, 0x216, 0x0000); + write_reg(par, 0x217, 0x0000); + + /* Gray scale settings */ + write_reg(par, 0x300, 0x5343); + write_reg(par, 0x301, 0x1021); + write_reg(par, 0x302, 0x0003); + write_reg(par, 0x303, 0x0011); + write_reg(par, 0x304, 0x050a); + write_reg(par, 0x305, 0x4342); + write_reg(par, 0x306, 0x1100); + write_reg(par, 0x307, 0x0003); + write_reg(par, 0x308, 0x1201); + write_reg(par, 0x309, 0x050a); + + /* RAM access settings */ + write_reg(par, 0x400, 0x4027); + write_reg(par, 0x401, 0x0000); + write_reg(par, 0x402, 0x0000); /* First screen drive position (1) */ + write_reg(par, 0x403, 0x013f); /* First screen drive position (2) */ + write_reg(par, 0x404, 0x0000); + + write_reg(par, 0x200, 0x0000); + write_reg(par, 0x201, 0x0000); + write_reg(par, 0x100, 0x7120); + write_reg(par, 0x007, 0x0103); + mdelay(10); + write_reg(par, 0x007, 0x0113); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + switch (par->info->var.rotate) { + /* R200h = Horizontal GRAM Start Address */ + /* R201h = Vertical GRAM Start Address */ + case 0: + write_reg(par, 0x0200, xs); + write_reg(par, 0x0201, ys); + break; + case 180: + write_reg(par, 0x0200, WIDTH - 1 - xs); + write_reg(par, 0x0201, HEIGHT - 1 - ys); + break; + case 270: + write_reg(par, 0x0200, WIDTH - 1 - ys); + write_reg(par, 0x0201, xs); + break; + case 90: + write_reg(par, 0x0200, ys); + write_reg(par, 0x0201, HEIGHT - 1 - xs); + break; + } + write_reg(par, 0x202); /* Write Data to GRAM */ +} + +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + /* AM: GRAM update direction */ + case 0: + write_reg(par, 0x003, 0x1230); + break; + case 180: + write_reg(par, 0x003, 0x1200); + break; + case 270: + write_reg(par, 0x003, 0x1228); + break; + case 90: + write_reg(par, 0x003, 0x1218); + break; + } + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 16, + .width = WIDTH, + .height = HEIGHT, + .bpp = BPP, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "hitachi,bd663474", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:bd663474"); +MODULE_ALIAS("platform:bd663474"); + +MODULE_DESCRIPTION("FB driver for the uPD161704 LCD Controller"); +MODULE_AUTHOR("Seong-Woo Kim"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_hx8340bn.c b/drivers/staging/fbtft/fb_hx8340bn.c new file mode 100644 index 000000000..2fd7b87ea --- /dev/null +++ b/drivers/staging/fbtft/fb_hx8340bn.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the HX8340BN LCD Controller + * + * This display uses 9-bit SPI: Data/Command bit + 8 data bits + * For platforms that doesn't support 9-bit, the driver is capable + * of emulating this using 8-bit transfer. + * This is done by transferring eight 9-bit words in 9 bytes. + * + * Copyright (C) 2013 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/vmalloc.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_hx8340bn" +#define WIDTH 176 +#define HEIGHT 220 +#define TXBUFLEN (4 * PAGE_SIZE) +#define DEFAULT_GAMMA "1 3 0E 5 0 2 09 0 6 1 7 1 0 2 2\n" \ + "3 3 17 8 4 7 05 7 6 0 3 1 6 0 0 " + +static bool emulate; +module_param(emulate, bool, 0000); +MODULE_PARM_DESC(emulate, "Force emulation in 9-bit mode"); + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* BTL221722-276L startup sequence, from datasheet */ + + /* + * SETEXTCOM: Set extended command set (C1h) + * This command is used to set extended command set access enable. + * Enable: After command (C1h), must write: ffh,83h,40h + */ + write_reg(par, 0xC1, 0xFF, 0x83, 0x40); + + /* + * Sleep out + * This command turns off sleep mode. + * In this mode the DC/DC converter is enabled, Internal oscillator + * is started, and panel scanning is started. + */ + write_reg(par, 0x11); + mdelay(150); + + /* Undoc'd register? */ + write_reg(par, 0xCA, 0x70, 0x00, 0xD9); + + /* + * SETOSC: Set Internal Oscillator (B0h) + * This command is used to set internal oscillator related settings + * OSC_EN: Enable internal oscillator + * Internal oscillator frequency: 125% x 2.52MHz + */ + write_reg(par, 0xB0, 0x01, 0x11); + + /* Drive ability setting */ + write_reg(par, 0xC9, 0x90, 0x49, 0x10, 0x28, 0x28, 0x10, 0x00, 0x06); + mdelay(20); + + /* + * SETPWCTR5: Set Power Control 5(B5h) + * This command is used to set VCOM Low and VCOM High Voltage + * VCOMH 0110101 : 3.925 + * VCOML 0100000 : -1.700 + * 45h=69 VCOMH: "VMH" + 5d VCOML: "VMH" + 5d + */ + write_reg(par, 0xB5, 0x35, 0x20, 0x45); + + /* + * SETPWCTR4: Set Power Control 4(B4h) + * VRH[4:0]: Specify the VREG1 voltage adjusting. + * VREG1 voltage is for gamma voltage setting. + * BT[2:0]: Switch the output factor of step-up circuit 2 + * for VGH and VGL voltage generation. + */ + write_reg(par, 0xB4, 0x33, 0x25, 0x4C); + mdelay(10); + + /* + * Interface Pixel Format (3Ah) + * This command is used to define the format of RGB picture data, + * which is to be transfer via the system and RGB interface. + * RGB interface: 16 Bit/Pixel + */ + write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); + + /* + * Display on (29h) + * This command is used to recover from DISPLAY OFF mode. + * Output from the Frame Memory is enabled. + */ + write_reg(par, MIPI_DCS_SET_DISPLAY_ON); + mdelay(10); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, xs, 0x00, xe); + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, 0x00, ys, 0x00, ye); + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +static int set_var(struct fbtft_par *par) +{ + /* MADCTL - Memory data access control */ + /* RGB/BGR can be set with H/W pin SRGB and MADCTL BGR bit */ +#define MY BIT(7) +#define MX BIT(6) +#define MV BIT(5) + switch (par->info->var.rotate) { + case 0: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, par->bgr << 3); + break; + case 270: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MX | MV | (par->bgr << 3)); + break; + case 180: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MX | MY | (par->bgr << 3)); + break; + case 90: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MY | MV | (par->bgr << 3)); + break; + } + + return 0; +} + +/* + * Gamma Curve selection, GC (only GC0 can be customized): + * 0 = 2.2, 1 = 1.8, 2 = 2.5, 3 = 1.0 + * Gamma string format: + * OP0 OP1 CP0 CP1 CP2 CP3 CP4 MP0 MP1 MP2 MP3 MP4 MP5 CGM0 CGM1 + * ON0 ON1 CN0 CN1 CN2 CN3 CN4 MN0 MN1 MN2 MN3 MN4 MN5 XXXX GC + */ +#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + static const unsigned long mask[] = { + 0x0f, 0x0f, 0x1f, 0x0f, 0x0f, 0x0f, 0x1f, 0x07, 0x07, 0x07, + 0x07, 0x07, 0x07, 0x03, 0x03, 0x0f, 0x0f, 0x1f, 0x0f, 0x0f, + 0x0f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x00, 0x00, + }; + int i, j; + + /* apply mask */ + for (i = 0; i < par->gamma.num_curves; i++) + for (j = 0; j < par->gamma.num_values; j++) + CURVE(i, j) &= mask[i * par->gamma.num_values + j]; + + /* Gamma Set (26h) */ + write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 1 << CURVE(1, 14)); + + if (CURVE(1, 14)) + return 0; /* only GC0 can be customized */ + + write_reg(par, 0xC2, + (CURVE(0, 8) << 4) | CURVE(0, 7), + (CURVE(0, 10) << 4) | CURVE(0, 9), + (CURVE(0, 12) << 4) | CURVE(0, 11), + CURVE(0, 2), + (CURVE(0, 4) << 4) | CURVE(0, 3), + CURVE(0, 5), + CURVE(0, 6), + (CURVE(0, 1) << 4) | CURVE(0, 0), + (CURVE(0, 14) << 2) | CURVE(0, 13)); + + write_reg(par, 0xC3, + (CURVE(1, 8) << 4) | CURVE(1, 7), + (CURVE(1, 10) << 4) | CURVE(1, 9), + (CURVE(1, 12) << 4) | CURVE(1, 11), + CURVE(1, 2), + (CURVE(1, 4) << 4) | CURVE(1, 3), + CURVE(1, 5), + CURVE(1, 6), + (CURVE(1, 1) << 4) | CURVE(1, 0)); + + mdelay(10); + + return 0; +} + +#undef CURVE + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .txbuflen = TXBUFLEN, + .gamma_num = 2, + .gamma_len = 15, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "himax,hx8340bn", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:hx8340bn"); +MODULE_ALIAS("platform:hx8340bn"); + +MODULE_DESCRIPTION("FB driver for the HX8340BN LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_hx8347d.c b/drivers/staging/fbtft/fb_hx8347d.c new file mode 100644 index 000000000..a9b72a8b4 --- /dev/null +++ b/drivers/staging/fbtft/fb_hx8347d.c @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the HX8347D LCD Controller + * + * Copyright (C) 2013 Christian Vogelgsang + * + * Based on driver code found here: https://github.com/watterott/r61505u-Adapter + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_hx8347d" +#define WIDTH 320 +#define HEIGHT 240 +#define DEFAULT_GAMMA "0 0 0 0 0 0 0 0 0 0 0 0 0 0\n" \ + "0 0 0 0 0 0 0 0 0 0 0 0 0 0" + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* driving ability */ + write_reg(par, 0xEA, 0x00); + write_reg(par, 0xEB, 0x20); + write_reg(par, 0xEC, 0x0C); + write_reg(par, 0xED, 0xC4); + write_reg(par, 0xE8, 0x40); + write_reg(par, 0xE9, 0x38); + write_reg(par, 0xF1, 0x01); + write_reg(par, 0xF2, 0x10); + write_reg(par, 0x27, 0xA3); + + /* power voltage */ + write_reg(par, 0x1B, 0x1B); + write_reg(par, 0x1A, 0x01); + write_reg(par, 0x24, 0x2F); + write_reg(par, 0x25, 0x57); + + /* VCOM offset */ + write_reg(par, 0x23, 0x8D); /* for flicker adjust */ + + /* power on */ + write_reg(par, 0x18, 0x36); + write_reg(par, 0x19, 0x01); /* start osc */ + write_reg(par, 0x01, 0x00); /* wakeup */ + write_reg(par, 0x1F, 0x88); + mdelay(5); + write_reg(par, 0x1F, 0x80); + mdelay(5); + write_reg(par, 0x1F, 0x90); + mdelay(5); + write_reg(par, 0x1F, 0xD0); + mdelay(5); + + /* color selection */ + write_reg(par, 0x17, 0x05); /* 65k */ + + /*panel characteristic */ + write_reg(par, 0x36, 0x00); + + /*display on */ + write_reg(par, 0x28, 0x38); + mdelay(40); + write_reg(par, 0x28, 0x3C); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, 0x02, (xs >> 8) & 0xFF); + write_reg(par, 0x03, xs & 0xFF); + write_reg(par, 0x04, (xe >> 8) & 0xFF); + write_reg(par, 0x05, xe & 0xFF); + write_reg(par, 0x06, (ys >> 8) & 0xFF); + write_reg(par, 0x07, ys & 0xFF); + write_reg(par, 0x08, (ye >> 8) & 0xFF); + write_reg(par, 0x09, ye & 0xFF); + write_reg(par, 0x22); +} + +#define MEM_Y BIT(7) /* MY row address order */ +#define MEM_X BIT(6) /* MX column address order */ +#define MEM_V BIT(5) /* MV row / column exchange */ +#define MEM_L BIT(4) /* ML vertical refresh order */ +#define MEM_BGR (3) /* RGB-BGR Order */ +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + case 0: + write_reg(par, 0x16, MEM_V | MEM_X | (par->bgr << MEM_BGR)); + break; + case 270: + write_reg(par, 0x16, par->bgr << MEM_BGR); + break; + case 180: + write_reg(par, 0x16, MEM_V | MEM_Y | (par->bgr << MEM_BGR)); + break; + case 90: + write_reg(par, 0x16, MEM_X | MEM_Y | (par->bgr << MEM_BGR)); + break; + } + + return 0; +} + +/* + * Gamma string format: + * VRP0 VRP1 VRP2 VRP3 VRP4 VRP5 PRP0 PRP1 PKP0 PKP1 PKP2 PKP3 PKP4 CGM + * VRN0 VRN1 VRN2 VRN3 VRN4 VRN5 PRN0 PRN1 PKN0 PKN1 PKN2 PKN3 PKN4 CGM + */ +#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + static const unsigned long mask[] = { + 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x7f, 0x7f, 0x1f, 0x1f, + 0x1f, 0x1f, 0x1f, 0x0f, + }; + int i, j; + int acc = 0; + + /* apply mask */ + for (i = 0; i < par->gamma.num_curves; i++) + for (j = 0; j < par->gamma.num_values; j++) { + acc += CURVE(i, j); + CURVE(i, j) &= mask[j]; + } + + if (acc == 0) /* skip if all values are zero */ + return 0; + + for (i = 0; i < par->gamma.num_curves; i++) { + write_reg(par, 0x40 + (i * 0x10), CURVE(i, 0)); + write_reg(par, 0x41 + (i * 0x10), CURVE(i, 1)); + write_reg(par, 0x42 + (i * 0x10), CURVE(i, 2)); + write_reg(par, 0x43 + (i * 0x10), CURVE(i, 3)); + write_reg(par, 0x44 + (i * 0x10), CURVE(i, 4)); + write_reg(par, 0x45 + (i * 0x10), CURVE(i, 5)); + write_reg(par, 0x46 + (i * 0x10), CURVE(i, 6)); + write_reg(par, 0x47 + (i * 0x10), CURVE(i, 7)); + write_reg(par, 0x48 + (i * 0x10), CURVE(i, 8)); + write_reg(par, 0x49 + (i * 0x10), CURVE(i, 9)); + write_reg(par, 0x4A + (i * 0x10), CURVE(i, 10)); + write_reg(par, 0x4B + (i * 0x10), CURVE(i, 11)); + write_reg(par, 0x4C + (i * 0x10), CURVE(i, 12)); + } + write_reg(par, 0x5D, (CURVE(1, 0) << 4) | CURVE(0, 0)); + + return 0; +} + +#undef CURVE + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .gamma_num = 2, + .gamma_len = 14, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "himax,hx8347d", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:hx8347d"); +MODULE_ALIAS("platform:hx8347d"); + +MODULE_DESCRIPTION("FB driver for the HX8347D LCD Controller"); +MODULE_AUTHOR("Christian Vogelgsang"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_hx8353d.c b/drivers/staging/fbtft/fb_hx8353d.c new file mode 100644 index 000000000..3e73b69b6 --- /dev/null +++ b/drivers/staging/fbtft/fb_hx8353d.c @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the HX8353D LCD Controller + * + * Copyright (c) 2014 Petr Olivka + * Copyright (c) 2013 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_hx8353d" +#define DEFAULT_GAMMA "50 77 40 08 BF 00 03 0F 00 01 73 00 72 03 B0 0F 08 00 0F" + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + mdelay(150); + + /* SETEXTC */ + write_reg(par, 0xB9, 0xFF, 0x83, 0x53); + + /* RADJ */ + write_reg(par, 0xB0, 0x3C, 0x01); + + /* VCOM */ + write_reg(par, 0xB6, 0x94, 0x6C, 0x50); + + /* PWR */ + write_reg(par, 0xB1, 0x00, 0x01, 0x1B, 0x03, 0x01, 0x08, 0x77, 0x89); + + /* COLMOD */ + write_reg(par, 0x3A, 0x05); + + /* MEM ACCESS */ + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0xC0); + + /* SLPOUT - Sleep out & booster on */ + write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); + mdelay(150); + + /* DISPON - Display On */ + write_reg(par, MIPI_DCS_SET_DISPLAY_ON); + + /* RGBSET */ + write_reg(par, MIPI_DCS_WRITE_LUT, + 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, + 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, + 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, + 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62); + + return 0; +}; + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + /* column address */ + write_reg(par, 0x2a, xs >> 8, xs & 0xff, xe >> 8, xe & 0xff); + + /* Row address */ + write_reg(par, 0x2b, ys >> 8, ys & 0xff, ye >> 8, ye & 0xff); + + /* memory write */ + write_reg(par, 0x2c); +} + +#define my BIT(7) +#define mx BIT(6) +#define mv BIT(5) +static int set_var(struct fbtft_par *par) +{ + /* + * madctl - memory data access control + * rgb/bgr: + * 1. mode selection pin srgb + * rgb h/w pin for color filter setting: 0=rgb, 1=bgr + * 2. madctl rgb bit + * rgb-bgr order color filter panel: 0=rgb, 1=bgr + */ + switch (par->info->var.rotate) { + case 0: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + mx | my | (par->bgr << 3)); + break; + case 270: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + my | mv | (par->bgr << 3)); + break; + case 180: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + par->bgr << 3); + break; + case 90: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + mx | mv | (par->bgr << 3)); + break; + } + + return 0; +} + +/* gamma string format: */ +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + write_reg(par, 0xE0, + curves[0], curves[1], curves[2], curves[3], + curves[4], curves[5], curves[6], curves[7], + curves[8], curves[9], curves[10], curves[11], + curves[12], curves[13], curves[14], curves[15], + curves[16], curves[17], curves[18]); + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = 128, + .height = 160, + .gamma_num = 1, + .gamma_len = 19, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "himax,hx8353d", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:hx8353d"); +MODULE_ALIAS("platform:hx8353d"); + +MODULE_DESCRIPTION("FB driver for the HX8353D LCD Controller"); +MODULE_AUTHOR("Petr Olivka"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_hx8357d.c b/drivers/staging/fbtft/fb_hx8357d.c new file mode 100644 index 000000000..94a357e8f --- /dev/null +++ b/drivers/staging/fbtft/fb_hx8357d.c @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the HX8357D LCD Controller + * Copyright (C) 2015 Adafruit Industries + * + * Based on the HX8347D FB driver + * Copyright (C) 2013 Christian Vogelgsang + * + * Based on driver code found here: https://github.com/watterott/r61505u-Adapter + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <video/mipi_display.h> + +#include "fbtft.h" +#include "fb_hx8357d.h" + +#define DRVNAME "fb_hx8357d" +#define WIDTH 320 +#define HEIGHT 480 + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* Reset things like Gamma */ + write_reg(par, MIPI_DCS_SOFT_RESET); + usleep_range(5000, 7000); + + /* setextc */ + write_reg(par, HX8357D_SETC, 0xFF, 0x83, 0x57); + msleep(150); + + /* setRGB which also enables SDO */ + write_reg(par, HX8357_SETRGB, 0x00, 0x00, 0x06, 0x06); + + /* -1.52V */ + write_reg(par, HX8357D_SETCOM, 0x25); + + /* Normal mode 70Hz, Idle mode 55 Hz */ + write_reg(par, HX8357_SETOSC, 0x68); + + /* Set Panel - BGR, Gate direction swapped */ + write_reg(par, HX8357_SETPANEL, 0x05); + + write_reg(par, HX8357_SETPWR1, + 0x00, /* Not deep standby */ + 0x15, /* BT */ + 0x1C, /* VSPR */ + 0x1C, /* VSNR */ + 0x83, /* AP */ + 0xAA); /* FS */ + + write_reg(par, HX8357D_SETSTBA, + 0x50, /* OPON normal */ + 0x50, /* OPON idle */ + 0x01, /* STBA */ + 0x3C, /* STBA */ + 0x1E, /* STBA */ + 0x08); /* GEN */ + + write_reg(par, HX8357D_SETCYC, + 0x02, /* NW 0x02 */ + 0x40, /* RTN */ + 0x00, /* DIV */ + 0x2A, /* DUM */ + 0x2A, /* DUM */ + 0x0D, /* GDON */ + 0x78); /* GDOFF */ + + write_reg(par, HX8357D_SETGAMMA, + 0x02, + 0x0A, + 0x11, + 0x1d, + 0x23, + 0x35, + 0x41, + 0x4b, + 0x4b, + 0x42, + 0x3A, + 0x27, + 0x1B, + 0x08, + 0x09, + 0x03, + 0x02, + 0x0A, + 0x11, + 0x1d, + 0x23, + 0x35, + 0x41, + 0x4b, + 0x4b, + 0x42, + 0x3A, + 0x27, + 0x1B, + 0x08, + 0x09, + 0x03, + 0x00, + 0x01); + + /* 16 bit */ + write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); + + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0xC0); + + /* TE off */ + write_reg(par, MIPI_DCS_SET_TEAR_ON, 0x00); + + /* tear line */ + write_reg(par, MIPI_DCS_SET_TEAR_SCANLINE, 0x00, 0x02); + + /* Exit Sleep */ + write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(150); + + /* display on */ + write_reg(par, MIPI_DCS_SET_DISPLAY_ON); + usleep_range(5000, 7000); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + xs >> 8, xs & 0xff, /* XSTART */ + xe >> 8, xe & 0xff); /* XEND */ + + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + ys >> 8, ys & 0xff, /* YSTART */ + ye >> 8, ye & 0xff); /* YEND */ + + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +#define HX8357D_MADCTL_MY 0x80 +#define HX8357D_MADCTL_MX 0x40 +#define HX8357D_MADCTL_MV 0x20 +#define HX8357D_MADCTL_ML 0x10 +#define HX8357D_MADCTL_RGB 0x00 +#define HX8357D_MADCTL_BGR 0x08 +#define HX8357D_MADCTL_MH 0x04 +static int set_var(struct fbtft_par *par) +{ + u8 val; + + switch (par->info->var.rotate) { + case 270: + val = HX8357D_MADCTL_MV | HX8357D_MADCTL_MX; + break; + case 180: + val = 0; + break; + case 90: + val = HX8357D_MADCTL_MV | HX8357D_MADCTL_MY; + break; + default: + val = HX8357D_MADCTL_MX | HX8357D_MADCTL_MY; + break; + } + + val |= (par->bgr ? HX8357D_MADCTL_RGB : HX8357D_MADCTL_BGR); + + /* Memory Access Control */ + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val); + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .gamma_num = 2, + .gamma_len = 14, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "himax,hx8357d", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:hx8357d"); +MODULE_ALIAS("platform:hx8357d"); + +MODULE_DESCRIPTION("FB driver for the HX8357D LCD Controller"); +MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_hx8357d.h b/drivers/staging/fbtft/fb_hx8357d.h new file mode 100644 index 000000000..6180b093f --- /dev/null +++ b/drivers/staging/fbtft/fb_hx8357d.h @@ -0,0 +1,71 @@ +/* SPDX-License-Identifier: MIT */ +/* + * This is our library for the Adafruit ILI9341 Breakout and Shield + * ----> http://www.adafruit.com/products/1651 + * + * Check out the links above for our tutorials and wiring diagrams + * These displays use SPI to communicate, 4 or 5 pins are required to + * interface (RST is optional) + * Adafruit invests time and resources providing this open source code, + * please support Adafruit and open-source hardware by purchasing + * products from Adafruit! + * + * Written by Limor Fried/Ladyada for Adafruit Industries. + * MIT license, all text above must be included in any redistribution + */ + +#ifndef __HX8357_H__ +#define __HX8357_H__ + +#define HX8357D 0xD +#define HX8357B 0xB + +#define HX8357_TFTWIDTH 320 +#define HX8357_TFTHEIGHT 480 + +#define HX8357_SETOSC 0xB0 +#define HX8357_SETPWR1 0xB1 +#define HX8357B_SETDISPLAY 0xB2 +#define HX8357_SETRGB 0xB3 +#define HX8357D_SETCOM 0xB6 + +#define HX8357B_SETDISPMODE 0xB4 +#define HX8357D_SETCYC 0xB4 +#define HX8357B_SETOTP 0xB7 +#define HX8357D_SETC 0xB9 + +#define HX8357B_SET_PANEL_DRIVING 0xC0 +#define HX8357D_SETSTBA 0xC0 +#define HX8357B_SETDGC 0xC1 +#define HX8357B_SETID 0xC3 +#define HX8357B_SETDDB 0xC4 +#define HX8357B_SETDISPLAYFRAME 0xC5 +#define HX8357B_GAMMASET 0xC8 +#define HX8357B_SETCABC 0xC9 +#define HX8357_SETPANEL 0xCC + +#define HX8357B_SETPOWER 0xD0 +#define HX8357B_SETVCOM 0xD1 +#define HX8357B_SETPWRNORMAL 0xD2 + +#define HX8357B_RDID1 0xDA +#define HX8357B_RDID2 0xDB +#define HX8357B_RDID3 0xDC +#define HX8357B_RDID4 0xDD + +#define HX8357D_SETGAMMA 0xE0 + +#define HX8357B_SETGAMMA 0xC8 +#define HX8357B_SETPANELRELATED 0xE9 + +/* Color definitions */ +#define HX8357_BLACK 0x0000 +#define HX8357_BLUE 0x001F +#define HX8357_RED 0xF800 +#define HX8357_GREEN 0x07E0 +#define HX8357_CYAN 0x07FF +#define HX8357_MAGENTA 0xF81F +#define HX8357_YELLOW 0xFFE0 +#define HX8357_WHITE 0xFFFF + +#endif /* __HX8357_H__ */ diff --git a/drivers/staging/fbtft/fb_ili9163.c b/drivers/staging/fbtft/fb_ili9163.c new file mode 100644 index 000000000..6582a2c90 --- /dev/null +++ b/drivers/staging/fbtft/fb_ili9163.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the ILI9163 LCD Controller + * + * Copyright (C) 2015 Kozhevnikov Anatoly + * + * Based on ili9325.c by Noralf Tronnes and + * .S.U.M.O.T.O.Y. by Max MC Costa (https://github.com/sumotoy/TFT_ILI9163C). + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ili9163" +#define WIDTH 128 +#define HEIGHT 128 +#define BPP 16 +#define FPS 30 + +#ifdef GAMMA_ADJ +#define GAMMA_LEN 15 +#define GAMMA_NUM 1 +#define DEFAULT_GAMMA "36 29 12 22 1C 15 42 B7 2F 13 12 0A 11 0B 06\n" +#endif + +/* ILI9163C commands */ +#define CMD_FRMCTR1 0xB1 /* Frame Rate Control */ + /* (In normal mode/Full colors) */ +#define CMD_FRMCTR2 0xB2 /* Frame Rate Control (In Idle mode/8-colors) */ +#define CMD_FRMCTR3 0xB3 /* Frame Rate Control */ + /* (In Partial mode/full colors) */ +#define CMD_DINVCTR 0xB4 /* Display Inversion Control */ +#define CMD_RGBBLK 0xB5 /* RGB Interface Blanking Porch setting */ +#define CMD_DFUNCTR 0xB6 /* Display Function set 5 */ +#define CMD_SDRVDIR 0xB7 /* Source Driver Direction Control */ +#define CMD_GDRVDIR 0xB8 /* Gate Driver Direction Control */ + +#define CMD_PWCTR1 0xC0 /* Power_Control1 */ +#define CMD_PWCTR2 0xC1 /* Power_Control2 */ +#define CMD_PWCTR3 0xC2 /* Power_Control3 */ +#define CMD_PWCTR4 0xC3 /* Power_Control4 */ +#define CMD_PWCTR5 0xC4 /* Power_Control5 */ +#define CMD_VCOMCTR1 0xC5 /* VCOM_Control 1 */ +#define CMD_VCOMCTR2 0xC6 /* VCOM_Control 2 */ +#define CMD_VCOMOFFS 0xC7 /* VCOM Offset Control */ +#define CMD_PGAMMAC 0xE0 /* Positive Gamma Correction Setting */ +#define CMD_NGAMMAC 0xE1 /* Negative Gamma Correction Setting */ +#define CMD_GAMRSEL 0xF2 /* GAM_R_SEL */ + +/* + * This display: + * http://www.ebay.com/itm/Replace-Nokia-5110-LCD-1-44-Red-Serial-128X128-SPI- + * Color-TFT-LCD-Display-Module-/271422122271 + * This particular display has a design error! The controller has 3 pins to + * configure to constrain the memory and resolution to a fixed dimension (in + * that case 128x128) but they leaved those pins configured for 128x160 so + * there was several pixel memory addressing problems. + * I solved by setup several parameters that dinamically fix the resolution as + * needit so below the parameters for this display. If you have a strain or a + * correct display (can happen with chinese) you can copy those parameters and + * create setup for different displays. + */ + +#ifdef RED +#define __OFFSET 32 /*see note 2 - this is the red version */ +#else +#define __OFFSET 0 /*see note 2 - this is the black version */ +#endif + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + write_reg(par, MIPI_DCS_SOFT_RESET); /* software reset */ + mdelay(500); + write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); /* exit sleep */ + mdelay(5); + write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); + /* default gamma curve 3 */ + write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x02); +#ifdef GAMMA_ADJ + write_reg(par, CMD_GAMRSEL, 0x01); /* Enable Gamma adj */ +#endif + write_reg(par, MIPI_DCS_ENTER_NORMAL_MODE); + write_reg(par, CMD_DFUNCTR, 0xff, 0x06); + /* Frame Rate Control (In normal mode/Full colors) */ + write_reg(par, CMD_FRMCTR1, 0x08, 0x02); + write_reg(par, CMD_DINVCTR, 0x07); /* display inversion */ + /* Set VRH1[4:0] & VC[2:0] for VCI1 & GVDD */ + write_reg(par, CMD_PWCTR1, 0x0A, 0x02); + /* Set BT[2:0] for AVDD & VCL & VGH & VGL */ + write_reg(par, CMD_PWCTR2, 0x02); + /* Set VMH[6:0] & VML[6:0] for VOMH & VCOML */ + write_reg(par, CMD_VCOMCTR1, 0x50, 0x63); + write_reg(par, CMD_VCOMOFFS, 0); + + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, 0, 0, 0, WIDTH); + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, 0, 0, 0, HEIGHT); + + write_reg(par, MIPI_DCS_SET_DISPLAY_ON); /* display ON */ + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); /* Memory Write */ + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, + int xe, int ye) +{ + switch (par->info->var.rotate) { + case 0: + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + xs >> 8, xs & 0xff, xe >> 8, xe & 0xff); + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + (ys + __OFFSET) >> 8, (ys + __OFFSET) & 0xff, + (ye + __OFFSET) >> 8, (ye + __OFFSET) & 0xff); + break; + case 90: + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + (xs + __OFFSET) >> 8, (xs + __OFFSET) & 0xff, + (xe + __OFFSET) >> 8, (xe + __OFFSET) & 0xff); + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + ys >> 8, ys & 0xff, ye >> 8, ye & 0xff); + break; + case 180: + case 270: + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + xs >> 8, xs & 0xff, xe >> 8, xe & 0xff); + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + ys >> 8, ys & 0xff, ye >> 8, ye & 0xff); + break; + default: + /* Fix incorrect setting */ + par->info->var.rotate = 0; + } + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +/* + * 7) MY: 1(bottom to top), 0(top to bottom) Row Address Order + * 6) MX: 1(R to L), 0(L to R) Column Address Order + * 5) MV: 1(Exchanged), 0(normal) Row/Column exchange + * 4) ML: 1(bottom to top), 0(top to bottom) Vertical Refresh Order + * 3) RGB: 1(BGR), 0(RGB) Color Space + * 2) MH: 1(R to L), 0(L to R) Horizontal Refresh Order + * 1) + * 0) + * + * MY, MX, MV, ML,RGB, MH, D1, D0 + * 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 //normal + * 1 | 0 | 0 | 0 | 1 | 0 | 0 | 0 //Y-Mirror + * 0 | 1 | 0 | 0 | 1 | 0 | 0 | 0 //X-Mirror + * 1 | 1 | 0 | 0 | 1 | 0 | 0 | 0 //X-Y-Mirror + * 0 | 0 | 1 | 0 | 1 | 0 | 0 | 0 //X-Y Exchange + * 1 | 0 | 1 | 0 | 1 | 0 | 0 | 0 //X-Y Exchange, Y-Mirror + * 0 | 1 | 1 | 0 | 1 | 0 | 0 | 0 //XY exchange + * 1 | 1 | 1 | 0 | 1 | 0 | 0 | 0 + */ +static int set_var(struct fbtft_par *par) +{ + u8 mactrl_data = 0; /* Avoid compiler warning */ + + switch (par->info->var.rotate) { + case 0: + mactrl_data = 0x08; + break; + case 180: + mactrl_data = 0xC8; + break; + case 270: + mactrl_data = 0xA8; + break; + case 90: + mactrl_data = 0x68; + break; + } + + /* Colorspcae */ + if (par->bgr) + mactrl_data |= BIT(2); + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, mactrl_data); + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); + return 0; +} + +#ifdef GAMMA_ADJ +#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] +static int gamma_adj(struct fbtft_par *par, u32 *curves) +{ + static const unsigned long mask[] = { + 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, + 0x1f, 0x3f, 0x0f, 0x0f, 0x7f, 0x1f, + 0x3F, 0x3F, 0x3F, 0x3F, 0x3F}; + int i, j; + + for (i = 0; i < GAMMA_NUM; i++) + for (j = 0; j < GAMMA_LEN; j++) + CURVE(i, j) &= mask[i * par->gamma.num_values + j]; + + write_reg(par, CMD_PGAMMAC, + CURVE(0, 0), + CURVE(0, 1), + CURVE(0, 2), + CURVE(0, 3), + CURVE(0, 4), + CURVE(0, 5), + CURVE(0, 6), + (CURVE(0, 7) << 4) | CURVE(0, 8), + CURVE(0, 9), + CURVE(0, 10), + CURVE(0, 11), + CURVE(0, 12), + CURVE(0, 13), + CURVE(0, 14), + CURVE(0, 15)); + + /* Write Data to GRAM mode */ + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); + + return 0; +} + +#undef CURVE +#endif + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .bpp = BPP, + .fps = FPS, +#ifdef GAMMA_ADJ + .gamma_num = GAMMA_NUM, + .gamma_len = GAMMA_LEN, + .gamma = DEFAULT_GAMMA, +#endif + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, +#ifdef GAMMA_ADJ + .set_gamma = gamma_adj, +#endif + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9163", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ili9163"); +MODULE_ALIAS("platform:ili9163"); + +MODULE_DESCRIPTION("FB driver for the ILI9163 LCD Controller"); +MODULE_AUTHOR("Kozhevnikov Anatoly"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ili9320.c b/drivers/staging/fbtft/fb_ili9320.c new file mode 100644 index 000000000..0be7c2d51 --- /dev/null +++ b/drivers/staging/fbtft/fb_ili9320.c @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the ILI9320 LCD Controller + * + * Copyright (C) 2013 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ili9320" +#define WIDTH 240 +#define HEIGHT 320 +#define DEFAULT_GAMMA "07 07 6 0 0 0 5 5 4 0\n" \ + "07 08 4 7 5 1 2 0 7 7" + +static unsigned int read_devicecode(struct fbtft_par *par) +{ + u8 rxbuf[8] = {0, }; + + write_reg(par, 0x0000); + par->fbtftops.read(par, rxbuf, 4); + return (rxbuf[2] << 8) | rxbuf[3]; +} + +static int init_display(struct fbtft_par *par) +{ + unsigned int devcode; + + par->fbtftops.reset(par); + + devcode = read_devicecode(par); + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "Device code: 0x%04X\n", + devcode); + if ((devcode != 0x0000) && (devcode != 0x9320)) + dev_warn(par->info->device, + "Unrecognized Device code: 0x%04X (expected 0x9320)\n", + devcode); + + /* Initialization sequence from ILI9320 Application Notes */ + + /* *********** Start Initial Sequence ********* */ + /* Set the Vcore voltage and this setting is must. */ + write_reg(par, 0x00E5, 0x8000); + + /* Start internal OSC. */ + write_reg(par, 0x0000, 0x0001); + + /* set SS and SM bit */ + write_reg(par, 0x0001, 0x0100); + + /* set 1 line inversion */ + write_reg(par, 0x0002, 0x0700); + + /* Resize register */ + write_reg(par, 0x0004, 0x0000); + + /* set the back and front porch */ + write_reg(par, 0x0008, 0x0202); + + /* set non-display area refresh cycle */ + write_reg(par, 0x0009, 0x0000); + + /* FMARK function */ + write_reg(par, 0x000A, 0x0000); + + /* RGB interface setting */ + write_reg(par, 0x000C, 0x0000); + + /* Frame marker Position */ + write_reg(par, 0x000D, 0x0000); + + /* RGB interface polarity */ + write_reg(par, 0x000F, 0x0000); + + /* ***********Power On sequence *************** */ + /* SAP, BT[3:0], AP, DSTB, SLP, STB */ + write_reg(par, 0x0010, 0x0000); + + /* DC1[2:0], DC0[2:0], VC[2:0] */ + write_reg(par, 0x0011, 0x0007); + + /* VREG1OUT voltage */ + write_reg(par, 0x0012, 0x0000); + + /* VDV[4:0] for VCOM amplitude */ + write_reg(par, 0x0013, 0x0000); + + /* Dis-charge capacitor power voltage */ + mdelay(200); + + /* SAP, BT[3:0], AP, DSTB, SLP, STB */ + write_reg(par, 0x0010, 0x17B0); + + /* R11h=0x0031 at VCI=3.3V DC1[2:0], DC0[2:0], VC[2:0] */ + write_reg(par, 0x0011, 0x0031); + mdelay(50); + + /* R12h=0x0138 at VCI=3.3V VREG1OUT voltage */ + write_reg(par, 0x0012, 0x0138); + mdelay(50); + + /* R13h=0x1800 at VCI=3.3V VDV[4:0] for VCOM amplitude */ + write_reg(par, 0x0013, 0x1800); + + /* R29h=0x0008 at VCI=3.3V VCM[4:0] for VCOMH */ + write_reg(par, 0x0029, 0x0008); + mdelay(50); + + /* GRAM horizontal Address */ + write_reg(par, 0x0020, 0x0000); + + /* GRAM Vertical Address */ + write_reg(par, 0x0021, 0x0000); + + /* ------------------ Set GRAM area --------------- */ + /* Horizontal GRAM Start Address */ + write_reg(par, 0x0050, 0x0000); + + /* Horizontal GRAM End Address */ + write_reg(par, 0x0051, 0x00EF); + + /* Vertical GRAM Start Address */ + write_reg(par, 0x0052, 0x0000); + + /* Vertical GRAM End Address */ + write_reg(par, 0x0053, 0x013F); + + /* Gate Scan Line */ + write_reg(par, 0x0060, 0x2700); + + /* NDL,VLE, REV */ + write_reg(par, 0x0061, 0x0001); + + /* set scrolling line */ + write_reg(par, 0x006A, 0x0000); + + /* -------------- Partial Display Control --------- */ + write_reg(par, 0x0080, 0x0000); + write_reg(par, 0x0081, 0x0000); + write_reg(par, 0x0082, 0x0000); + write_reg(par, 0x0083, 0x0000); + write_reg(par, 0x0084, 0x0000); + write_reg(par, 0x0085, 0x0000); + + /* -------------- Panel Control ------------------- */ + write_reg(par, 0x0090, 0x0010); + write_reg(par, 0x0092, 0x0000); + write_reg(par, 0x0093, 0x0003); + write_reg(par, 0x0095, 0x0110); + write_reg(par, 0x0097, 0x0000); + write_reg(par, 0x0098, 0x0000); + write_reg(par, 0x0007, 0x0173); /* 262K color and display ON */ + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + switch (par->info->var.rotate) { + /* R20h = Horizontal GRAM Start Address */ + /* R21h = Vertical GRAM Start Address */ + case 0: + write_reg(par, 0x0020, xs); + write_reg(par, 0x0021, ys); + break; + case 180: + write_reg(par, 0x0020, WIDTH - 1 - xs); + write_reg(par, 0x0021, HEIGHT - 1 - ys); + break; + case 270: + write_reg(par, 0x0020, WIDTH - 1 - ys); + write_reg(par, 0x0021, xs); + break; + case 90: + write_reg(par, 0x0020, ys); + write_reg(par, 0x0021, HEIGHT - 1 - xs); + break; + } + write_reg(par, 0x0022); /* Write Data to GRAM */ +} + +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + case 0: + write_reg(par, 0x3, (par->bgr << 12) | 0x30); + break; + case 270: + write_reg(par, 0x3, (par->bgr << 12) | 0x28); + break; + case 180: + write_reg(par, 0x3, (par->bgr << 12) | 0x00); + break; + case 90: + write_reg(par, 0x3, (par->bgr << 12) | 0x18); + break; + } + return 0; +} + +/* + * Gamma string format: + * VRP0 VRP1 RP0 RP1 KP0 KP1 KP2 KP3 KP4 KP5 + * VRN0 VRN1 RN0 RN1 KN0 KN1 KN2 KN3 KN4 KN5 + */ +#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + static const unsigned long mask[] = { + 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + }; + int i, j; + + /* apply mask */ + for (i = 0; i < 2; i++) + for (j = 0; j < 10; j++) + CURVE(i, j) &= mask[i * par->gamma.num_values + j]; + + write_reg(par, 0x0030, CURVE(0, 5) << 8 | CURVE(0, 4)); + write_reg(par, 0x0031, CURVE(0, 7) << 8 | CURVE(0, 6)); + write_reg(par, 0x0032, CURVE(0, 9) << 8 | CURVE(0, 8)); + write_reg(par, 0x0035, CURVE(0, 3) << 8 | CURVE(0, 2)); + write_reg(par, 0x0036, CURVE(0, 1) << 8 | CURVE(0, 0)); + + write_reg(par, 0x0037, CURVE(1, 5) << 8 | CURVE(1, 4)); + write_reg(par, 0x0038, CURVE(1, 7) << 8 | CURVE(1, 6)); + write_reg(par, 0x0039, CURVE(1, 9) << 8 | CURVE(1, 8)); + write_reg(par, 0x003C, CURVE(1, 3) << 8 | CURVE(1, 2)); + write_reg(par, 0x003D, CURVE(1, 1) << 8 | CURVE(1, 0)); + + return 0; +} + +#undef CURVE + +static struct fbtft_display display = { + .regwidth = 16, + .width = WIDTH, + .height = HEIGHT, + .gamma_num = 2, + .gamma_len = 10, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9320", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ili9320"); +MODULE_ALIAS("platform:ili9320"); + +MODULE_DESCRIPTION("FB driver for the ILI9320 LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ili9325.c b/drivers/staging/fbtft/fb_ili9325.c new file mode 100644 index 000000000..16d3b17ca --- /dev/null +++ b/drivers/staging/fbtft/fb_ili9325.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the ILI9325 LCD Controller + * + * Copyright (C) 2013 Noralf Tronnes + * + * Based on ili9325.c by Jeroen Domburg + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ili9325" +#define WIDTH 240 +#define HEIGHT 320 +#define BPP 16 +#define FPS 20 +#define DEFAULT_GAMMA "0F 00 7 2 0 0 6 5 4 1\n" \ + "04 16 2 7 6 3 2 1 7 7" + +static unsigned int bt = 6; /* VGL=Vci*4 , VGH=Vci*4 */ +module_param(bt, uint, 0000); +MODULE_PARM_DESC(bt, "Sets the factor used in the step-up circuits"); + +static unsigned int vc = 0x03; /* Vci1=Vci*0.80 */ +module_param(vc, uint, 0000); +MODULE_PARM_DESC(vc, "Sets the ratio factor of Vci to generate the reference voltages Vci1"); + +static unsigned int vrh = 0x0d; /* VREG1OUT=Vci*1.85 */ +module_param(vrh, uint, 0000); +MODULE_PARM_DESC(vrh, "Set the amplifying rate (1.6 ~ 1.9) of Vci applied to output the VREG1OUT"); + +static unsigned int vdv = 0x12; /* VCOMH amplitude=VREG1OUT*0.98 */ +module_param(vdv, uint, 0000); +MODULE_PARM_DESC(vdv, "Select the factor of VREG1OUT to set the amplitude of Vcom"); + +static unsigned int vcm = 0x0a; /* VCOMH=VREG1OUT*0.735 */ +module_param(vcm, uint, 0000); +MODULE_PARM_DESC(vcm, "Set the internal VcomH voltage"); + +/* + * Verify that this configuration is within the Voltage limits + * + * Display module configuration: Vcc = IOVcc = Vci = 3.3V + * + * Voltages + * ---------- + * Vci = 3.3 + * Vci1 = Vci * 0.80 = 2.64 + * DDVDH = Vci1 * 2 = 5.28 + * VCL = -Vci1 = -2.64 + * VREG1OUT = Vci * 1.85 = 4.88 + * VCOMH = VREG1OUT * 0.735 = 3.59 + * VCOM amplitude = VREG1OUT * 0.98 = 4.79 + * VGH = Vci * 4 = 13.2 + * VGL = -Vci * 4 = -13.2 + * + * Limits + * -------- + * Power supplies + * 1.65 < IOVcc < 3.30 => 1.65 < 3.3 < 3.30 + * 2.40 < Vcc < 3.30 => 2.40 < 3.3 < 3.30 + * 2.50 < Vci < 3.30 => 2.50 < 3.3 < 3.30 + * + * Source/VCOM power supply voltage + * 4.50 < DDVDH < 6.0 => 4.50 < 5.28 < 6.0 + * -3.0 < VCL < -2.0 => -3.0 < -2.64 < -2.0 + * VCI - VCL < 6.0 => 5.94 < 6.0 + * + * Gate driver output voltage + * 10 < VGH < 20 => 10 < 13.2 < 20 + * -15 < VGL < -5 => -15 < -13.2 < -5 + * VGH - VGL < 32 => 26.4 < 32 + * + * VCOM driver output voltage + * VCOMH - VCOML < 6.0 => 4.79 < 6.0 + */ + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + bt &= 0x07; + vc &= 0x07; + vrh &= 0x0f; + vdv &= 0x1f; + vcm &= 0x3f; + + /* Initialization sequence from ILI9325 Application Notes */ + + /* ----------- Start Initial Sequence ----------- */ + write_reg(par, 0x00E3, 0x3008); /* Set internal timing */ + write_reg(par, 0x00E7, 0x0012); /* Set internal timing */ + write_reg(par, 0x00EF, 0x1231); /* Set internal timing */ + write_reg(par, 0x0001, 0x0100); /* set SS and SM bit */ + write_reg(par, 0x0002, 0x0700); /* set 1 line inversion */ + write_reg(par, 0x0004, 0x0000); /* Resize register */ + write_reg(par, 0x0008, 0x0207); /* set the back porch and front porch */ + write_reg(par, 0x0009, 0x0000); /* set non-display area refresh cycle */ + write_reg(par, 0x000A, 0x0000); /* FMARK function */ + write_reg(par, 0x000C, 0x0000); /* RGB interface setting */ + write_reg(par, 0x000D, 0x0000); /* Frame marker Position */ + write_reg(par, 0x000F, 0x0000); /* RGB interface polarity */ + + /* ----------- Power On sequence ----------- */ + write_reg(par, 0x0010, 0x0000); /* SAP, BT[3:0], AP, DSTB, SLP, STB */ + write_reg(par, 0x0011, 0x0007); /* DC1[2:0], DC0[2:0], VC[2:0] */ + write_reg(par, 0x0012, 0x0000); /* VREG1OUT voltage */ + write_reg(par, 0x0013, 0x0000); /* VDV[4:0] for VCOM amplitude */ + mdelay(200); /* Dis-charge capacitor power voltage */ + write_reg(par, 0x0010, /* SAP, BT[3:0], AP, DSTB, SLP, STB */ + BIT(12) | (bt << 8) | BIT(7) | BIT(4)); + write_reg(par, 0x0011, 0x220 | vc); /* DC1[2:0], DC0[2:0], VC[2:0] */ + mdelay(50); /* Delay 50ms */ + write_reg(par, 0x0012, vrh); /* Internal reference voltage= Vci; */ + mdelay(50); /* Delay 50ms */ + write_reg(par, 0x0013, vdv << 8); /* Set VDV[4:0] for VCOM amplitude */ + write_reg(par, 0x0029, vcm); /* Set VCM[5:0] for VCOMH */ + write_reg(par, 0x002B, 0x000C); /* Set Frame Rate */ + mdelay(50); /* Delay 50ms */ + write_reg(par, 0x0020, 0x0000); /* GRAM horizontal Address */ + write_reg(par, 0x0021, 0x0000); /* GRAM Vertical Address */ + + /*------------------ Set GRAM area --------------- */ + write_reg(par, 0x0050, 0x0000); /* Horizontal GRAM Start Address */ + write_reg(par, 0x0051, 0x00EF); /* Horizontal GRAM End Address */ + write_reg(par, 0x0052, 0x0000); /* Vertical GRAM Start Address */ + write_reg(par, 0x0053, 0x013F); /* Vertical GRAM Start Address */ + write_reg(par, 0x0060, 0xA700); /* Gate Scan Line */ + write_reg(par, 0x0061, 0x0001); /* NDL,VLE, REV */ + write_reg(par, 0x006A, 0x0000); /* set scrolling line */ + + /*-------------- Partial Display Control --------- */ + write_reg(par, 0x0080, 0x0000); + write_reg(par, 0x0081, 0x0000); + write_reg(par, 0x0082, 0x0000); + write_reg(par, 0x0083, 0x0000); + write_reg(par, 0x0084, 0x0000); + write_reg(par, 0x0085, 0x0000); + + /*-------------- Panel Control ------------------- */ + write_reg(par, 0x0090, 0x0010); + write_reg(par, 0x0092, 0x0600); + write_reg(par, 0x0007, 0x0133); /* 262K color and display ON */ + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + switch (par->info->var.rotate) { + /* R20h = Horizontal GRAM Start Address */ + /* R21h = Vertical GRAM Start Address */ + case 0: + write_reg(par, 0x0020, xs); + write_reg(par, 0x0021, ys); + break; + case 180: + write_reg(par, 0x0020, WIDTH - 1 - xs); + write_reg(par, 0x0021, HEIGHT - 1 - ys); + break; + case 270: + write_reg(par, 0x0020, WIDTH - 1 - ys); + write_reg(par, 0x0021, xs); + break; + case 90: + write_reg(par, 0x0020, ys); + write_reg(par, 0x0021, HEIGHT - 1 - xs); + break; + } + write_reg(par, 0x0022); /* Write Data to GRAM */ +} + +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + /* AM: GRAM update direction */ + case 0: + write_reg(par, 0x03, 0x0030 | (par->bgr << 12)); + break; + case 180: + write_reg(par, 0x03, 0x0000 | (par->bgr << 12)); + break; + case 270: + write_reg(par, 0x03, 0x0028 | (par->bgr << 12)); + break; + case 90: + write_reg(par, 0x03, 0x0018 | (par->bgr << 12)); + break; + } + + return 0; +} + +/* + * Gamma string format: + * VRP0 VRP1 RP0 RP1 KP0 KP1 KP2 KP3 KP4 KP5 + * VRN0 VRN1 RN0 RN1 KN0 KN1 KN2 KN3 KN4 KN5 + */ +#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + static const unsigned long mask[] = { + 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + }; + int i, j; + + /* apply mask */ + for (i = 0; i < 2; i++) + for (j = 0; j < 10; j++) + CURVE(i, j) &= mask[i * par->gamma.num_values + j]; + + write_reg(par, 0x0030, CURVE(0, 5) << 8 | CURVE(0, 4)); + write_reg(par, 0x0031, CURVE(0, 7) << 8 | CURVE(0, 6)); + write_reg(par, 0x0032, CURVE(0, 9) << 8 | CURVE(0, 8)); + write_reg(par, 0x0035, CURVE(0, 3) << 8 | CURVE(0, 2)); + write_reg(par, 0x0036, CURVE(0, 1) << 8 | CURVE(0, 0)); + + write_reg(par, 0x0037, CURVE(1, 5) << 8 | CURVE(1, 4)); + write_reg(par, 0x0038, CURVE(1, 7) << 8 | CURVE(1, 6)); + write_reg(par, 0x0039, CURVE(1, 9) << 8 | CURVE(1, 8)); + write_reg(par, 0x003C, CURVE(1, 3) << 8 | CURVE(1, 2)); + write_reg(par, 0x003D, CURVE(1, 1) << 8 | CURVE(1, 0)); + + return 0; +} + +#undef CURVE + +static struct fbtft_display display = { + .regwidth = 16, + .width = WIDTH, + .height = HEIGHT, + .bpp = BPP, + .fps = FPS, + .gamma_num = 2, + .gamma_len = 10, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9325", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ili9325"); +MODULE_ALIAS("platform:ili9325"); + +MODULE_DESCRIPTION("FB driver for the ILI9325 LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ili9340.c b/drivers/staging/fbtft/fb_ili9340.c new file mode 100644 index 000000000..704236bca --- /dev/null +++ b/drivers/staging/fbtft/fb_ili9340.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the ILI9340 LCD Controller + * + * Copyright (C) 2013 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ili9340" +#define WIDTH 240 +#define HEIGHT 320 + +/* Init sequence taken from: Arduino Library for the Adafruit 2.2" display */ +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + write_reg(par, 0xEF, 0x03, 0x80, 0x02); + write_reg(par, 0xCF, 0x00, 0XC1, 0X30); + write_reg(par, 0xED, 0x64, 0x03, 0X12, 0X81); + write_reg(par, 0xE8, 0x85, 0x00, 0x78); + write_reg(par, 0xCB, 0x39, 0x2C, 0x00, 0x34, 0x02); + write_reg(par, 0xF7, 0x20); + write_reg(par, 0xEA, 0x00, 0x00); + + /* Power Control 1 */ + write_reg(par, 0xC0, 0x23); + + /* Power Control 2 */ + write_reg(par, 0xC1, 0x10); + + /* VCOM Control 1 */ + write_reg(par, 0xC5, 0x3e, 0x28); + + /* VCOM Control 2 */ + write_reg(par, 0xC7, 0x86); + + /* COLMOD: Pixel Format Set */ + /* 16 bits/pixel */ + write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); + + /* Frame Rate Control */ + /* Division ratio = fosc, Frame Rate = 79Hz */ + write_reg(par, 0xB1, 0x00, 0x18); + + /* Display Function Control */ + write_reg(par, 0xB6, 0x08, 0x82, 0x27); + + /* Gamma Function Disable */ + write_reg(par, 0xF2, 0x00); + + /* Gamma curve selection */ + write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01); + + /* Positive Gamma Correction */ + write_reg(par, 0xE0, + 0x0F, 0x31, 0x2B, 0x0C, 0x0E, 0x08, 0x4E, 0xF1, + 0x37, 0x07, 0x10, 0x03, 0x0E, 0x09, 0x00); + + /* Negative Gamma Correction */ + write_reg(par, 0xE1, + 0x00, 0x0E, 0x14, 0x03, 0x11, 0x07, 0x31, 0xC1, + 0x48, 0x08, 0x0F, 0x0C, 0x31, 0x36, 0x0F); + + write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); + + mdelay(120); + + write_reg(par, MIPI_DCS_SET_DISPLAY_ON); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF); + + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF); + + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +#define ILI9340_MADCTL_MV 0x20 +#define ILI9340_MADCTL_MX 0x40 +#define ILI9340_MADCTL_MY 0x80 +static int set_var(struct fbtft_par *par) +{ + u8 val; + + switch (par->info->var.rotate) { + case 270: + val = ILI9340_MADCTL_MV; + break; + case 180: + val = ILI9340_MADCTL_MY; + break; + case 90: + val = ILI9340_MADCTL_MV | ILI9340_MADCTL_MY | ILI9340_MADCTL_MX; + break; + default: + val = ILI9340_MADCTL_MX; + break; + } + /* Memory Access Control */ + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, val | (par->bgr << 3)); + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9340", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ili9340"); +MODULE_ALIAS("platform:ili9340"); + +MODULE_DESCRIPTION("FB driver for the ILI9340 LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ili9341.c b/drivers/staging/fbtft/fb_ili9341.c new file mode 100644 index 000000000..47e72b87d --- /dev/null +++ b/drivers/staging/fbtft/fb_ili9341.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the ILI9341 LCD display controller + * + * This display uses 9-bit SPI: Data/Command bit + 8 data bits + * For platforms that doesn't support 9-bit, the driver is capable + * of emulating this using 8-bit transfer. + * This is done by transferring eight 9-bit words in 9 bytes. + * + * Copyright (C) 2013 Christian Vogelgsang + * Based on adafruit22fb.c by Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ili9341" +#define WIDTH 240 +#define HEIGHT 320 +#define TXBUFLEN (4 * PAGE_SIZE) +#define DEFAULT_GAMMA "1F 1A 18 0A 0F 06 45 87 32 0A 07 02 07 05 00\n" \ + "00 25 27 05 10 09 3A 78 4D 05 18 0D 38 3A 1F" + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* startup sequence for MI0283QT-9A */ + write_reg(par, MIPI_DCS_SOFT_RESET); + mdelay(5); + write_reg(par, MIPI_DCS_SET_DISPLAY_OFF); + /* --------------------------------------------------------- */ + write_reg(par, 0xCF, 0x00, 0x83, 0x30); + write_reg(par, 0xED, 0x64, 0x03, 0x12, 0x81); + write_reg(par, 0xE8, 0x85, 0x01, 0x79); + write_reg(par, 0xCB, 0x39, 0X2C, 0x00, 0x34, 0x02); + write_reg(par, 0xF7, 0x20); + write_reg(par, 0xEA, 0x00, 0x00); + /* ------------power control-------------------------------- */ + write_reg(par, 0xC0, 0x26); + write_reg(par, 0xC1, 0x11); + /* ------------VCOM --------- */ + write_reg(par, 0xC5, 0x35, 0x3E); + write_reg(par, 0xC7, 0xBE); + /* ------------memory access control------------------------ */ + write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); /* 16bit pixel */ + /* ------------frame rate----------------------------------- */ + write_reg(par, 0xB1, 0x00, 0x1B); + /* ------------Gamma---------------------------------------- */ + /* write_reg(par, 0xF2, 0x08); */ /* Gamma Function Disable */ + write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x01); + /* ------------display-------------------------------------- */ + write_reg(par, 0xB7, 0x07); /* entry mode set */ + write_reg(par, 0xB6, 0x0A, 0x82, 0x27, 0x00); + write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); + mdelay(100); + write_reg(par, MIPI_DCS_SET_DISPLAY_ON); + mdelay(20); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF); + + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF); + + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +#define MEM_Y BIT(7) /* MY row address order */ +#define MEM_X BIT(6) /* MX column address order */ +#define MEM_V BIT(5) /* MV row / column exchange */ +#define MEM_L BIT(4) /* ML vertical refresh order */ +#define MEM_H BIT(2) /* MH horizontal refresh order */ +#define MEM_BGR (3) /* RGB-BGR Order */ +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + case 0: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MEM_X | (par->bgr << MEM_BGR)); + break; + case 270: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MEM_V | MEM_L | (par->bgr << MEM_BGR)); + break; + case 180: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MEM_Y | (par->bgr << MEM_BGR)); + break; + case 90: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MEM_Y | MEM_X | MEM_V | (par->bgr << MEM_BGR)); + break; + } + + return 0; +} + +/* + * Gamma string format: + * Positive: Par1 Par2 [...] Par15 + * Negative: Par1 Par2 [...] Par15 + */ +#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + int i; + + for (i = 0; i < par->gamma.num_curves; i++) + write_reg(par, 0xE0 + i, + CURVE(i, 0), CURVE(i, 1), CURVE(i, 2), + CURVE(i, 3), CURVE(i, 4), CURVE(i, 5), + CURVE(i, 6), CURVE(i, 7), CURVE(i, 8), + CURVE(i, 9), CURVE(i, 10), CURVE(i, 11), + CURVE(i, 12), CURVE(i, 13), CURVE(i, 14)); + + return 0; +} + +#undef CURVE + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .txbuflen = TXBUFLEN, + .gamma_num = 2, + .gamma_len = 15, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_SPI_DRIVER(DRVNAME, "ilitek", "ili9341", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ili9341"); +MODULE_ALIAS("platform:ili9341"); + +MODULE_DESCRIPTION("FB driver for the ILI9341 LCD display controller"); +MODULE_AUTHOR("Christian Vogelgsang"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ili9481.c b/drivers/staging/fbtft/fb_ili9481.c new file mode 100644 index 000000000..19eba085e --- /dev/null +++ b/drivers/staging/fbtft/fb_ili9481.c @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the ILI9481 LCD Controller + * + * Copyright (c) 2014 Petr Olivka + * Copyright (c) 2013 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ili9481" +#define WIDTH 320 +#define HEIGHT 480 + +static const s16 default_init_sequence[] = { + /* SLP_OUT - Sleep out */ + -1, MIPI_DCS_EXIT_SLEEP_MODE, + -2, 50, + /* Power setting */ + -1, 0xD0, 0x07, 0x42, 0x18, + /* VCOM */ + -1, 0xD1, 0x00, 0x07, 0x10, + /* Power setting for norm. mode */ + -1, 0xD2, 0x01, 0x02, + /* Panel driving setting */ + -1, 0xC0, 0x10, 0x3B, 0x00, 0x02, 0x11, + /* Frame rate & inv. */ + -1, 0xC5, 0x03, + /* Pixel format */ + -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55, + /* Gamma */ + -1, 0xC8, 0x00, 0x32, 0x36, 0x45, 0x06, 0x16, + 0x37, 0x75, 0x77, 0x54, 0x0C, 0x00, + /* DISP_ON */ + -1, MIPI_DCS_SET_DISPLAY_ON, + -3 +}; + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + xs >> 8, xs & 0xff, xe >> 8, xe & 0xff); + + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + ys >> 8, ys & 0xff, ye >> 8, ye & 0xff); + + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +#define HFLIP 0x01 +#define VFLIP 0x02 +#define ROW_X_COL 0x20 +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + case 270: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + ROW_X_COL | HFLIP | VFLIP | (par->bgr << 3)); + break; + case 180: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + VFLIP | (par->bgr << 3)); + break; + case 90: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + ROW_X_COL | (par->bgr << 3)); + break; + default: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + HFLIP | (par->bgr << 3)); + break; + } + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .init_sequence = default_init_sequence, + .fbtftops = { + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9481", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ili9481"); +MODULE_ALIAS("platform:ili9481"); + +MODULE_DESCRIPTION("FB driver for the ILI9481 LCD Controller"); +MODULE_AUTHOR("Petr Olivka"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ili9486.c b/drivers/staging/fbtft/fb_ili9486.c new file mode 100644 index 000000000..66210a713 --- /dev/null +++ b/drivers/staging/fbtft/fb_ili9486.c @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the ILI9486 LCD Controller + * + * Copyright (C) 2014 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ili9486" +#define WIDTH 320 +#define HEIGHT 480 + +/* this init sequence matches PiScreen */ +static const s16 default_init_sequence[] = { + /* Interface Mode Control */ + -1, 0xb0, 0x0, + -1, MIPI_DCS_EXIT_SLEEP_MODE, + -2, 250, + /* Interface Pixel Format */ + -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x55, + /* Power Control 3 */ + -1, 0xC2, 0x44, + /* VCOM Control 1 */ + -1, 0xC5, 0x00, 0x00, 0x00, 0x00, + /* PGAMCTRL(Positive Gamma Control) */ + -1, 0xE0, 0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98, + 0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x00, + /* NGAMCTRL(Negative Gamma Control) */ + -1, 0xE1, 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75, + 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00, + /* Digital Gamma Control 1 */ + -1, 0xE2, 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75, + 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00, + -1, MIPI_DCS_EXIT_SLEEP_MODE, + -1, MIPI_DCS_SET_DISPLAY_ON, + /* end marker */ + -3 +}; + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF); + + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF); + + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + case 0: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + 0x80 | (par->bgr << 3)); + break; + case 90: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + 0x20 | (par->bgr << 3)); + break; + case 180: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + 0x40 | (par->bgr << 3)); + break; + case 270: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + 0xE0 | (par->bgr << 3)); + break; + default: + break; + } + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .init_sequence = default_init_sequence, + .fbtftops = { + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9486", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ili9486"); +MODULE_ALIAS("platform:ili9486"); + +MODULE_DESCRIPTION("FB driver for the ILI9486 LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_pcd8544.c b/drivers/staging/fbtft/fb_pcd8544.c new file mode 100644 index 000000000..08f8a4bb8 --- /dev/null +++ b/drivers/staging/fbtft/fb_pcd8544.c @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the PCD8544 LCD Controller + * + * The display is monochrome and the video memory is RGB565. + * Any pixel value except 0 turns the pixel on. + * + * Copyright (C) 2013 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_pcd8544" +#define WIDTH 84 +#define HEIGHT 48 +#define TXBUFLEN (84 * 6) +#define DEFAULT_GAMMA "40" /* gamma controls the contrast in this driver */ + +static unsigned int tc; +module_param(tc, uint, 0000); +MODULE_PARM_DESC(tc, "TC[1:0] Temperature coefficient: 0-3 (default: 0)"); + +static unsigned int bs = 4; +module_param(bs, uint, 0000); +MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)"); + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* Function set + * + * 5:1 1 + * 2:0 PD - Powerdown control: chip is active + * 1:0 V - Entry mode: horizontal addressing + * 0:1 H - Extended instruction set control: extended + */ + write_reg(par, 0x21); + + /* H=1 Temperature control + * + * 2:1 1 + * 1:x TC1 - Temperature Coefficient: 0x10 + * 0:x TC0 + */ + write_reg(par, 0x04 | (tc & 0x3)); + + /* H=1 Bias system + * + * 4:1 1 + * 3:0 0 + * 2:x BS2 - Bias System + * 1:x BS1 + * 0:x BS0 + */ + write_reg(par, 0x10 | (bs & 0x7)); + + /* Function set + * + * 5:1 1 + * 2:0 PD - Powerdown control: chip is active + * 1:1 V - Entry mode: vertical addressing + * 0:0 H - Extended instruction set control: basic + */ + write_reg(par, 0x22); + + /* H=0 Display control + * + * 3:1 1 + * 2:1 D - DE: 10=normal mode + * 1:0 0 + * 0:0 E + */ + write_reg(par, 0x08 | 4); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + /* H=0 Set X address of RAM + * + * 7:1 1 + * 6-0: X[6:0] - 0x00 + */ + write_reg(par, 0x80); + + /* H=0 Set Y address of RAM + * + * 7:0 0 + * 6:1 1 + * 2-0: Y[2:0] - 0x0 + */ + write_reg(par, 0x40); +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16 = (u16 *)par->info->screen_buffer; + u8 *buf = par->txbuf.buf; + int x, y, i; + int ret = 0; + + for (x = 0; x < 84; x++) { + for (y = 0; y < 6; y++) { + *buf = 0x00; + for (i = 0; i < 8; i++) + *buf |= (vmem16[(y * 8 + i) * 84 + x] ? + 1 : 0) << i; + buf++; + } + } + + /* Write data */ + gpiod_set_value(par->gpio.dc, 1); + ret = par->fbtftops.write(par, par->txbuf.buf, 6 * 84); + if (ret < 0) + dev_err(par->info->device, "write failed and returned: %d\n", + ret); + + return ret; +} + +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + /* apply mask */ + curves[0] &= 0x7F; + + write_reg(par, 0x23); /* turn on extended instruction set */ + write_reg(par, 0x80 | curves[0]); + write_reg(par, 0x22); /* turn off extended instruction set */ + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .txbuflen = TXBUFLEN, + .gamma_num = 1, + .gamma_len = 1, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .write_vmem = write_vmem, + .set_gamma = set_gamma, + }, + .backlight = 1, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "philips,pcd8544", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("spi:pcd8544"); + +MODULE_DESCRIPTION("FB driver for the PCD8544 LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ra8875.c b/drivers/staging/fbtft/fb_ra8875.c new file mode 100644 index 000000000..398bdbf53 --- /dev/null +++ b/drivers/staging/fbtft/fb_ra8875.c @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FBTFT driver for the RA8875 LCD Controller + * Copyright by Pf@nne & NOTRO + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include <linux/gpio/consumer.h> +#include "fbtft.h" + +#define DRVNAME "fb_ra8875" + +static int write_spi(struct fbtft_par *par, void *buf, size_t len) +{ + struct spi_transfer t = { + .tx_buf = buf, + .len = len, + .speed_hz = 1000000, + }; + struct spi_message m; + + fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len, + "%s(len=%zu): ", __func__, len); + + if (!par->spi) { + dev_err(par->info->device, + "%s: par->spi is unexpectedly NULL\n", __func__); + return -1; + } + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + return spi_sync(par->spi, &m); +} + +static int init_display(struct fbtft_par *par) +{ + gpiod_set_value(par->gpio.dc, 1); + + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, + "%s()\n", __func__); + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, + "display size %dx%d\n", + par->info->var.xres, + par->info->var.yres); + + par->fbtftops.reset(par); + + if ((par->info->var.xres == 320) && (par->info->var.yres == 240)) { + /* PLL clock frequency */ + write_reg(par, 0x88, 0x0A); + write_reg(par, 0x89, 0x02); + mdelay(10); + /* color deep / MCU Interface */ + write_reg(par, 0x10, 0x0C); + /* pixel clock period */ + write_reg(par, 0x04, 0x03); + mdelay(1); + /* horizontal settings */ + write_reg(par, 0x14, 0x27); + write_reg(par, 0x15, 0x00); + write_reg(par, 0x16, 0x05); + write_reg(par, 0x17, 0x04); + write_reg(par, 0x18, 0x03); + /* vertical settings */ + write_reg(par, 0x19, 0xEF); + write_reg(par, 0x1A, 0x00); + write_reg(par, 0x1B, 0x05); + write_reg(par, 0x1C, 0x00); + write_reg(par, 0x1D, 0x0E); + write_reg(par, 0x1E, 0x00); + write_reg(par, 0x1F, 0x02); + } else if ((par->info->var.xres == 480) && + (par->info->var.yres == 272)) { + /* PLL clock frequency */ + write_reg(par, 0x88, 0x0A); + write_reg(par, 0x89, 0x02); + mdelay(10); + /* color deep / MCU Interface */ + write_reg(par, 0x10, 0x0C); + /* pixel clock period */ + write_reg(par, 0x04, 0x82); + mdelay(1); + /* horizontal settings */ + write_reg(par, 0x14, 0x3B); + write_reg(par, 0x15, 0x00); + write_reg(par, 0x16, 0x01); + write_reg(par, 0x17, 0x00); + write_reg(par, 0x18, 0x05); + /* vertical settings */ + write_reg(par, 0x19, 0x0F); + write_reg(par, 0x1A, 0x01); + write_reg(par, 0x1B, 0x02); + write_reg(par, 0x1C, 0x00); + write_reg(par, 0x1D, 0x07); + write_reg(par, 0x1E, 0x00); + write_reg(par, 0x1F, 0x09); + } else if ((par->info->var.xres == 640) && + (par->info->var.yres == 480)) { + /* PLL clock frequency */ + write_reg(par, 0x88, 0x0B); + write_reg(par, 0x89, 0x02); + mdelay(10); + /* color deep / MCU Interface */ + write_reg(par, 0x10, 0x0C); + /* pixel clock period */ + write_reg(par, 0x04, 0x01); + mdelay(1); + /* horizontal settings */ + write_reg(par, 0x14, 0x4F); + write_reg(par, 0x15, 0x05); + write_reg(par, 0x16, 0x0F); + write_reg(par, 0x17, 0x01); + write_reg(par, 0x18, 0x00); + /* vertical settings */ + write_reg(par, 0x19, 0xDF); + write_reg(par, 0x1A, 0x01); + write_reg(par, 0x1B, 0x0A); + write_reg(par, 0x1C, 0x00); + write_reg(par, 0x1D, 0x0E); + write_reg(par, 0x1E, 0x00); + write_reg(par, 0x1F, 0x01); + } else if ((par->info->var.xres == 800) && + (par->info->var.yres == 480)) { + /* PLL clock frequency */ + write_reg(par, 0x88, 0x0B); + write_reg(par, 0x89, 0x02); + mdelay(10); + /* color deep / MCU Interface */ + write_reg(par, 0x10, 0x0C); + /* pixel clock period */ + write_reg(par, 0x04, 0x81); + mdelay(1); + /* horizontal settings */ + write_reg(par, 0x14, 0x63); + write_reg(par, 0x15, 0x03); + write_reg(par, 0x16, 0x03); + write_reg(par, 0x17, 0x02); + write_reg(par, 0x18, 0x00); + /* vertical settings */ + write_reg(par, 0x19, 0xDF); + write_reg(par, 0x1A, 0x01); + write_reg(par, 0x1B, 0x14); + write_reg(par, 0x1C, 0x00); + write_reg(par, 0x1D, 0x06); + write_reg(par, 0x1E, 0x00); + write_reg(par, 0x1F, 0x01); + } else { + dev_err(par->info->device, "display size is not supported!!"); + return -1; + } + + /* PWM clock */ + write_reg(par, 0x8a, 0x81); + write_reg(par, 0x8b, 0xFF); + mdelay(10); + + /* Display ON */ + write_reg(par, 0x01, 0x80); + mdelay(10); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + /* Set_Active_Window */ + write_reg(par, 0x30, xs & 0x00FF); + write_reg(par, 0x31, (xs & 0xFF00) >> 8); + write_reg(par, 0x32, ys & 0x00FF); + write_reg(par, 0x33, (ys & 0xFF00) >> 8); + write_reg(par, 0x34, (xs + xe) & 0x00FF); + write_reg(par, 0x35, ((xs + xe) & 0xFF00) >> 8); + write_reg(par, 0x36, (ys + ye) & 0x00FF); + write_reg(par, 0x37, ((ys + ye) & 0xFF00) >> 8); + + /* Set_Memory_Write_Cursor */ + write_reg(par, 0x46, xs & 0xff); + write_reg(par, 0x47, (xs >> 8) & 0x03); + write_reg(par, 0x48, ys & 0xff); + write_reg(par, 0x49, (ys >> 8) & 0x01); + + write_reg(par, 0x02); +} + +static void write_reg8_bus8(struct fbtft_par *par, int len, ...) +{ + va_list args; + int i, ret; + u8 *buf = par->buf; + + /* slow down spi-speed for writing registers */ + par->fbtftops.write = write_spi; + + if (unlikely(par->debug & DEBUG_WRITE_REGISTER)) { + va_start(args, len); + for (i = 0; i < len; i++) + buf[i] = (u8)va_arg(args, unsigned int); + va_end(args); + fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par, par->info->device, + u8, buf, len, "%s: ", __func__); + } + + va_start(args, len); + *buf++ = 0x80; + *buf = (u8)va_arg(args, unsigned int); + ret = par->fbtftops.write(par, par->buf, 2); + if (ret < 0) { + va_end(args); + dev_err(par->info->device, "write() failed and returned %dn", + ret); + return; + } + len--; + + udelay(100); + + if (len) { + buf = (u8 *)par->buf; + *buf++ = 0x00; + i = len; + while (i--) + *buf++ = (u8)va_arg(args, unsigned int); + + ret = par->fbtftops.write(par, par->buf, len + 1); + if (ret < 0) { + va_end(args); + dev_err(par->info->device, + "write() failed and returned %dn", ret); + return; + } + } + va_end(args); + + /* restore user spi-speed */ + par->fbtftops.write = fbtft_write_spi; + udelay(100); +} + +static int write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16; + __be16 *txbuf16; + size_t remain; + size_t to_copy; + size_t tx_array_size; + int i; + int ret = 0; + size_t startbyte_size = 0; + + fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s(offset=%zu, len=%zu)\n", + __func__, offset, len); + + remain = len / 2; + vmem16 = (u16 *)(par->info->screen_buffer + offset); + tx_array_size = par->txbuf.len / 2; + txbuf16 = par->txbuf.buf + 1; + tx_array_size -= 2; + *(u8 *)(par->txbuf.buf) = 0x00; + startbyte_size = 1; + + while (remain) { + to_copy = min(tx_array_size, remain); + dev_dbg(par->info->device, " to_copy=%zu, remain=%zu\n", + to_copy, remain - to_copy); + + for (i = 0; i < to_copy; i++) + txbuf16[i] = cpu_to_be16(vmem16[i]); + + vmem16 = vmem16 + to_copy; + ret = par->fbtftops.write(par, par->txbuf.buf, + startbyte_size + to_copy * 2); + if (ret < 0) + return ret; + remain -= to_copy; + } + + return ret; +} + +static struct fbtft_display display = { + .regwidth = 8, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .write_register = write_reg8_bus8, + .write_vmem = write_vmem16_bus8, + .write = write_spi, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "raio,ra8875", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ra8875"); +MODULE_ALIAS("platform:ra8875"); + +MODULE_DESCRIPTION("FB driver for the RA8875 LCD Controller"); +MODULE_AUTHOR("Pf@nne"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_s6d02a1.c b/drivers/staging/fbtft/fb_s6d02a1.c new file mode 100644 index 000000000..d3d6871d8 --- /dev/null +++ b/drivers/staging/fbtft/fb_s6d02a1.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the S6D02A1 LCD Controller + * + * Based on fb_st7735r.c by Noralf Tronnes + * Init code from UTFT library by Henning Karlsen + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_s6d02a1" + +static const s16 default_init_sequence[] = { + -1, 0xf0, 0x5a, 0x5a, + + -1, 0xfc, 0x5a, 0x5a, + + -1, 0xfa, 0x02, 0x1f, 0x00, 0x10, 0x22, 0x30, 0x38, + 0x3A, 0x3A, 0x3A, 0x3A, 0x3A, 0x3d, 0x02, 0x01, + + -1, 0xfb, 0x21, 0x00, 0x02, 0x04, 0x07, 0x0a, 0x0b, + 0x0c, 0x0c, 0x16, 0x1e, 0x30, 0x3f, 0x01, 0x02, + + /* power setting sequence */ + -1, 0xfd, 0x00, 0x00, 0x00, 0x17, 0x10, 0x00, 0x01, + 0x01, 0x00, 0x1f, 0x1f, + + -1, 0xf4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f, + 0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00, + + -1, 0xf5, 0x00, 0x70, 0x66, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x6d, 0x66, 0x06, + + -1, 0xf6, 0x02, 0x00, 0x3f, 0x00, 0x00, 0x00, 0x02, + 0x00, 0x06, 0x01, 0x00, + + -1, 0xf2, 0x00, 0x01, 0x03, 0x08, 0x08, 0x04, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x04, 0x08, 0x08, + + -1, 0xf8, 0x11, + + -1, 0xf7, 0xc8, 0x20, 0x00, 0x00, + + -1, 0xf3, 0x00, 0x00, + + -1, MIPI_DCS_EXIT_SLEEP_MODE, + -2, 50, + + -1, 0xf3, 0x00, 0x01, + -2, 50, + -1, 0xf3, 0x00, 0x03, + -2, 50, + -1, 0xf3, 0x00, 0x07, + -2, 50, + -1, 0xf3, 0x00, 0x0f, + -2, 50, + + -1, 0xf4, 0x00, 0x04, 0x00, 0x00, 0x00, 0x3f, 0x3f, + 0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00, + -2, 50, + + -1, 0xf3, 0x00, 0x1f, + -2, 50, + -1, 0xf3, 0x00, 0x7f, + -2, 50, + + -1, 0xf3, 0x00, 0xff, + -2, 50, + + -1, 0xfd, 0x00, 0x00, 0x00, 0x17, 0x10, 0x00, 0x00, + 0x01, 0x00, 0x16, 0x16, + + -1, 0xf4, 0x00, 0x09, 0x00, 0x00, 0x00, 0x3f, 0x3f, + 0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00, + + /* initializing sequence */ + + -1, MIPI_DCS_SET_ADDRESS_MODE, 0x08, + + -1, MIPI_DCS_SET_TEAR_ON, 0x00, + + -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x05, + + /* gamma setting - possible values 0x01, 0x02, 0x04, 0x08 */ + -1, MIPI_DCS_SET_GAMMA_CURVE, 0x01, + + -2, 150, + -1, MIPI_DCS_SET_DISPLAY_ON, + -1, MIPI_DCS_WRITE_MEMORY_START, + /* end marker */ + -3 + +}; + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF); + + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF); + + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +#define MY BIT(7) +#define MX BIT(6) +#define MV BIT(5) +static int set_var(struct fbtft_par *par) +{ + /* + * Memory data access control (0x36h) + * RGB/BGR: + * 1. Mode selection pin SRGB + * RGB H/W pin for color filter setting: 0=RGB, 1=BGR + * 2. MADCTL RGB bit + * RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR + */ + switch (par->info->var.rotate) { + case 0: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MX | MY | (par->bgr << 3)); + break; + case 270: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MY | MV | (par->bgr << 3)); + break; + case 180: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + par->bgr << 3); + break; + case 90: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MX | MV | (par->bgr << 3)); + break; + } + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = 128, + .height = 160, + .init_sequence = default_init_sequence, + .fbtftops = { + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "samsung,s6d02a1", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:s6d02a1"); +MODULE_ALIAS("platform:s6d02a1"); + +MODULE_DESCRIPTION("FB driver for the S6D02A1 LCD Controller"); +MODULE_AUTHOR("WOLFGANG BUENING"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_s6d1121.c b/drivers/staging/fbtft/fb_s6d1121.c new file mode 100644 index 000000000..62f27172f --- /dev/null +++ b/drivers/staging/fbtft/fb_s6d1121.c @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the S6D1121 LCD Controller + * + * Copyright (C) 2013 Roman Rolinsky + * + * Based on fb_ili9325.c by Noralf Tronnes + * Based on ili9325.c by Jeroen Domburg + * Init code from UTFT library by Henning Karlsen + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_s6d1121" +#define WIDTH 240 +#define HEIGHT 320 +#define BPP 16 +#define FPS 20 +#define DEFAULT_GAMMA "26 09 24 2C 1F 23 24 25 22 26 25 23 0D 00\n" \ + "1C 1A 13 1D 0B 11 12 10 13 15 36 19 00 0D" + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* Initialization sequence from Lib_UTFT */ + + write_reg(par, 0x0011, 0x2004); + write_reg(par, 0x0013, 0xCC00); + write_reg(par, 0x0015, 0x2600); + write_reg(par, 0x0014, 0x252A); + write_reg(par, 0x0012, 0x0033); + write_reg(par, 0x0013, 0xCC04); + write_reg(par, 0x0013, 0xCC06); + write_reg(par, 0x0013, 0xCC4F); + write_reg(par, 0x0013, 0x674F); + write_reg(par, 0x0011, 0x2003); + write_reg(par, 0x0016, 0x0007); + write_reg(par, 0x0002, 0x0013); + write_reg(par, 0x0003, 0x0003); + write_reg(par, 0x0001, 0x0127); + write_reg(par, 0x0008, 0x0303); + write_reg(par, 0x000A, 0x000B); + write_reg(par, 0x000B, 0x0003); + write_reg(par, 0x000C, 0x0000); + write_reg(par, 0x0041, 0x0000); + write_reg(par, 0x0050, 0x0000); + write_reg(par, 0x0060, 0x0005); + write_reg(par, 0x0070, 0x000B); + write_reg(par, 0x0071, 0x0000); + write_reg(par, 0x0078, 0x0000); + write_reg(par, 0x007A, 0x0000); + write_reg(par, 0x0079, 0x0007); + write_reg(par, 0x0007, 0x0051); + write_reg(par, 0x0007, 0x0053); + write_reg(par, 0x0079, 0x0000); + + write_reg(par, 0x0022); /* Write Data to GRAM */ + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + switch (par->info->var.rotate) { + /* R20h = Horizontal GRAM Start Address */ + /* R21h = Vertical GRAM Start Address */ + case 0: + write_reg(par, 0x0020, xs); + write_reg(par, 0x0021, ys); + break; + case 180: + write_reg(par, 0x0020, WIDTH - 1 - xs); + write_reg(par, 0x0021, HEIGHT - 1 - ys); + break; + case 270: + write_reg(par, 0x0020, WIDTH - 1 - ys); + write_reg(par, 0x0021, xs); + break; + case 90: + write_reg(par, 0x0020, ys); + write_reg(par, 0x0021, HEIGHT - 1 - xs); + break; + } + write_reg(par, 0x0022); /* Write Data to GRAM */ +} + +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + /* AM: GRAM update direction */ + case 0: + write_reg(par, 0x03, 0x0003 | (par->bgr << 12)); + break; + case 180: + write_reg(par, 0x03, 0x0000 | (par->bgr << 12)); + break; + case 270: + write_reg(par, 0x03, 0x000A | (par->bgr << 12)); + break; + case 90: + write_reg(par, 0x03, 0x0009 | (par->bgr << 12)); + break; + } + + return 0; +} + +/* + * Gamma string format: + * PKP0 PKP1 PKP2 PKP3 PKP4 PKP5 PKP6 PKP7 PKP8 PKP9 PKP10 PKP11 VRP0 VRP1 + * PKN0 PKN1 PKN2 PKN3 PKN4 PKN5 PKN6 PKN7 PRN8 PRN9 PRN10 PRN11 VRN0 VRN1 + */ +#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + static const unsigned long mask[] = { + 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, + 0x3f, 0x3f, 0x1f, 0x1f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, + 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x1f, 0x1f, + }; + int i, j; + + /* apply mask */ + for (i = 0; i < 2; i++) + for (j = 0; j < 14; j++) + CURVE(i, j) &= mask[i * par->gamma.num_values + j]; + + write_reg(par, 0x0030, CURVE(0, 1) << 8 | CURVE(0, 0)); + write_reg(par, 0x0031, CURVE(0, 3) << 8 | CURVE(0, 2)); + write_reg(par, 0x0032, CURVE(0, 5) << 8 | CURVE(0, 3)); + write_reg(par, 0x0033, CURVE(0, 7) << 8 | CURVE(0, 6)); + write_reg(par, 0x0034, CURVE(0, 9) << 8 | CURVE(0, 8)); + write_reg(par, 0x0035, CURVE(0, 11) << 8 | CURVE(0, 10)); + + write_reg(par, 0x0036, CURVE(1, 1) << 8 | CURVE(1, 0)); + write_reg(par, 0x0037, CURVE(1, 3) << 8 | CURVE(1, 2)); + write_reg(par, 0x0038, CURVE(1, 5) << 8 | CURVE(1, 4)); + write_reg(par, 0x0039, CURVE(1, 7) << 8 | CURVE(1, 6)); + write_reg(par, 0x003A, CURVE(1, 9) << 8 | CURVE(1, 8)); + write_reg(par, 0x003B, CURVE(1, 11) << 8 | CURVE(1, 10)); + + write_reg(par, 0x003C, CURVE(0, 13) << 8 | CURVE(0, 12)); + write_reg(par, 0x003D, CURVE(1, 13) << 8 | CURVE(1, 12)); + + return 0; +} + +#undef CURVE + +static struct fbtft_display display = { + .regwidth = 16, + .width = WIDTH, + .height = HEIGHT, + .bpp = BPP, + .fps = FPS, + .gamma_num = 2, + .gamma_len = 14, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "samsung,s6d1121", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:s6d1121"); +MODULE_ALIAS("platform:s6d1121"); + +MODULE_DESCRIPTION("FB driver for the S6D1121 LCD Controller"); +MODULE_AUTHOR("Roman Rolinsky"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_seps525.c b/drivers/staging/fbtft/fb_seps525.c new file mode 100644 index 000000000..05882e2cd --- /dev/null +++ b/drivers/staging/fbtft/fb_seps525.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * FB driver for the NHD-1.69-160128UGC3 (Newhaven Display International, Inc.) + * using the SEPS525 (Syncoam) LCD Controller + * + * Copyright (C) 2016 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_seps525" +#define WIDTH 160 +#define HEIGHT 128 + +#define SEPS525_INDEX 0x00 +#define SEPS525_STATUS_RD 0x01 +#define SEPS525_OSC_CTL 0x02 +#define SEPS525_IREF 0x80 +#define SEPS525_CLOCK_DIV 0x03 +#define SEPS525_REDUCE_CURRENT 0x04 +#define SEPS525_SOFT_RST 0x05 +#define SEPS525_DISP_ONOFF 0x06 +#define SEPS525_PRECHARGE_TIME_R 0x08 +#define SEPS525_PRECHARGE_TIME_G 0x09 +#define SEPS525_PRECHARGE_TIME_B 0x0A +#define SEPS525_PRECHARGE_CURRENT_R 0x0B +#define SEPS525_PRECHARGE_CURRENT_G 0x0C +#define SEPS525_PRECHARGE_CURRENT_B 0x0D +#define SEPS525_DRIVING_CURRENT_R 0x10 +#define SEPS525_DRIVING_CURRENT_G 0x11 +#define SEPS525_DRIVING_CURRENT_B 0x12 +#define SEPS525_DISPLAYMODE_SET 0x13 +#define SEPS525_RGBIF 0x14 +#define SEPS525_RGB_POL 0x15 +#define SEPS525_MEMORY_WRITEMODE 0x16 +#define SEPS525_MX1_ADDR 0x17 +#define SEPS525_MX2_ADDR 0x18 +#define SEPS525_MY1_ADDR 0x19 +#define SEPS525_MY2_ADDR 0x1A +#define SEPS525_MEMORY_ACCESS_POINTER_X 0x20 +#define SEPS525_MEMORY_ACCESS_POINTER_Y 0x21 +#define SEPS525_DDRAM_DATA_ACCESS_PORT 0x22 +#define SEPS525_GRAY_SCALE_TABLE_INDEX 0x50 +#define SEPS525_GRAY_SCALE_TABLE_DATA 0x51 +#define SEPS525_DUTY 0x28 +#define SEPS525_DSL 0x29 +#define SEPS525_D1_DDRAM_FAC 0x2E +#define SEPS525_D1_DDRAM_FAR 0x2F +#define SEPS525_D2_DDRAM_SAC 0x31 +#define SEPS525_D2_DDRAM_SAR 0x32 +#define SEPS525_SCR1_FX1 0x33 +#define SEPS525_SCR1_FX2 0x34 +#define SEPS525_SCR1_FY1 0x35 +#define SEPS525_SCR1_FY2 0x36 +#define SEPS525_SCR2_SX1 0x37 +#define SEPS525_SCR2_SX2 0x38 +#define SEPS525_SCR2_SY1 0x39 +#define SEPS525_SCR2_SY2 0x3A +#define SEPS525_SCREEN_SAVER_CONTEROL 0x3B +#define SEPS525_SS_SLEEP_TIMER 0x3C +#define SEPS525_SCREEN_SAVER_MODE 0x3D +#define SEPS525_SS_SCR1_FU 0x3E +#define SEPS525_SS_SCR1_MXY 0x3F +#define SEPS525_SS_SCR2_FU 0x40 +#define SEPS525_SS_SCR2_MXY 0x41 +#define SEPS525_MOVING_DIRECTION 0x42 +#define SEPS525_SS_SCR2_SX1 0x47 +#define SEPS525_SS_SCR2_SX2 0x48 +#define SEPS525_SS_SCR2_SY1 0x49 +#define SEPS525_SS_SCR2_SY2 0x4A + +/* SEPS525_DISPLAYMODE_SET */ +#define MODE_SWAP_BGR BIT(7) +#define MODE_SM BIT(6) +#define MODE_RD BIT(5) +#define MODE_CD BIT(4) + +#define seps525_use_window 0 /* FBTFT doesn't really use it today */ + +/* Init sequence taken from: Arduino Library for the Adafruit 2.2" display */ +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + usleep_range(1000, 5000); + + /* Disable Oscillator Power Down */ + write_reg(par, SEPS525_REDUCE_CURRENT, 0x03); + usleep_range(1000, 5000); + /* Set Normal Driving Current */ + write_reg(par, SEPS525_REDUCE_CURRENT, 0x00); + usleep_range(1000, 5000); + + write_reg(par, SEPS525_SCREEN_SAVER_CONTEROL, 0x00); + /* Set EXPORT1 Pin at Internal Clock */ + write_reg(par, SEPS525_OSC_CTL, 0x01); + /* Set Clock as 120 Frames/Sec */ + write_reg(par, SEPS525_CLOCK_DIV, 0x90); + /* Set Reference Voltage Controlled by External Resister */ + write_reg(par, SEPS525_IREF, 0x01); + + /* precharge time R G B */ + write_reg(par, SEPS525_PRECHARGE_TIME_R, 0x04); + write_reg(par, SEPS525_PRECHARGE_TIME_G, 0x05); + write_reg(par, SEPS525_PRECHARGE_TIME_B, 0x05); + + /* precharge current R G B (uA) */ + write_reg(par, SEPS525_PRECHARGE_CURRENT_R, 0x9D); + write_reg(par, SEPS525_PRECHARGE_CURRENT_G, 0x8C); + write_reg(par, SEPS525_PRECHARGE_CURRENT_B, 0x57); + + /* driving current R G B (uA) */ + write_reg(par, SEPS525_DRIVING_CURRENT_R, 0x56); + write_reg(par, SEPS525_DRIVING_CURRENT_G, 0x4D); + write_reg(par, SEPS525_DRIVING_CURRENT_B, 0x46); + /* Set Color Sequence */ + write_reg(par, SEPS525_DISPLAYMODE_SET, 0xA0); + write_reg(par, SEPS525_RGBIF, 0x01); /* Set MCU Interface Mode */ + /* Set Memory Write Mode */ + write_reg(par, SEPS525_MEMORY_WRITEMODE, 0x66); + write_reg(par, SEPS525_DUTY, 0x7F); /* 1/128 Duty (0x0F~0x7F) */ + /* Set Mapping RAM Display Start Line (0x00~0x7F) */ + write_reg(par, SEPS525_DSL, 0x00); + write_reg(par, SEPS525_DISP_ONOFF, 0x01); /* Display On (0x00/0x01) */ + /* Set All Internal Register Value as Normal Mode */ + write_reg(par, SEPS525_SOFT_RST, 0x00); + /* Set RGB Interface Polarity as Active Low */ + write_reg(par, SEPS525_RGB_POL, 0x00); + + write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + if (seps525_use_window) { + /* Set Window Xs,Ys Xe,Ye*/ + write_reg(par, SEPS525_MX1_ADDR, xs); + write_reg(par, SEPS525_MX2_ADDR, xe); + write_reg(par, SEPS525_MY1_ADDR, ys); + write_reg(par, SEPS525_MY2_ADDR, ye); + } + /* start position X,Y */ + write_reg(par, SEPS525_MEMORY_ACCESS_POINTER_X, xs); + write_reg(par, SEPS525_MEMORY_ACCESS_POINTER_Y, ys); + + write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT); +} + +static int set_var(struct fbtft_par *par) +{ + u8 val; + + switch (par->info->var.rotate) { + case 0: + val = 0; + break; + case 180: + val = MODE_RD | MODE_CD; + break; + case 90: + case 270: + + default: + return -EINVAL; + } + /* Memory Access Control */ + write_reg(par, SEPS525_DISPLAYMODE_SET, val | + (par->bgr ? MODE_SWAP_BGR : 0)); + + write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT); + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "syncoam,seps525", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:seps525"); +MODULE_ALIAS("platform:seps525"); + +MODULE_DESCRIPTION("FB driver for the SEPS525 LCD Controller"); +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_sh1106.c b/drivers/staging/fbtft/fb_sh1106.c new file mode 100644 index 000000000..9685ca516 --- /dev/null +++ b/drivers/staging/fbtft/fb_sh1106.c @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the SH1106 OLED Controller + * Based on the SSD1306 driver by Noralf Tronnes + * + * Copyright (C) 2017 Heiner Kallweit + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_sh1106" +#define WIDTH 128 +#define HEIGHT 64 + +/* Init sequence based on the Adafruit SSD1306 Arduino library */ +static int init_display(struct fbtft_par *par) +{ + if (!par->info->var.xres || par->info->var.xres > WIDTH || + !par->info->var.yres || par->info->var.yres > HEIGHT || + par->info->var.yres % 8) { + dev_err(par->info->device, "Invalid screen size\n"); + return -EINVAL; + } + + if (par->info->var.rotate) { + dev_err(par->info->device, "Display rotation not supported\n"); + return -EINVAL; + } + + par->fbtftops.reset(par); + + /* Set Display OFF */ + write_reg(par, 0xAE); + + /* Set Display Clock Divide Ratio/ Oscillator Frequency */ + write_reg(par, 0xD5, 0x80); + + /* Set Multiplex Ratio */ + write_reg(par, 0xA8, par->info->var.yres - 1); + + /* Set Display Offset */ + write_reg(par, 0xD3, 0x00); + + /* Set Display Start Line */ + write_reg(par, 0x40 | 0x0); + + /* Set Segment Re-map */ + /* column address 127 is mapped to SEG0 */ + write_reg(par, 0xA0 | 0x1); + + /* Set COM Output Scan Direction */ + /* remapped mode. Scan from COM[N-1] to COM0 */ + write_reg(par, 0xC8); + + /* Set COM Pins Hardware Configuration */ + if (par->info->var.yres == 64) + /* A[4]=1b, Alternative COM pin configuration */ + write_reg(par, 0xDA, 0x12); + else if (par->info->var.yres == 48) + /* A[4]=1b, Alternative COM pin configuration */ + write_reg(par, 0xDA, 0x12); + else + /* A[4]=0b, Sequential COM pin configuration */ + write_reg(par, 0xDA, 0x02); + + /* Set Pre-charge Period */ + write_reg(par, 0xD9, 0xF1); + + /* Set VCOMH Deselect Level */ + write_reg(par, 0xDB, 0x40); + + /* Set Display ON */ + write_reg(par, 0xAF); + + msleep(150); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ +} + +static int blank(struct fbtft_par *par, bool on) +{ + fbtft_par_dbg(DEBUG_BLANK, par, "(%s=%s)\n", + __func__, on ? "true" : "false"); + + write_reg(par, on ? 0xAE : 0xAF); + + return 0; +} + +/* Gamma is used to control Contrast */ +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + /* apply mask */ + curves[0] &= 0xFF; + + /* Set Contrast Control for BANK0 */ + write_reg(par, 0x81, curves[0]); + + return 0; +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16 = (u16 *)par->info->screen_buffer; + u32 xres = par->info->var.xres; + int page, page_start, page_end, x, i, ret; + u8 *buf = par->txbuf.buf; + + /* offset refers to vmem with 2 bytes element size */ + page_start = offset / (8 * 2 * xres); + page_end = DIV_ROUND_UP(offset + len, 8 * 2 * xres); + + for (page = page_start; page < page_end; page++) { + /* set page and set column to 2 because of vidmem width 132 */ + write_reg(par, 0xb0 | page, 0x00 | 2, 0x10 | 0); + + memset(buf, 0, xres); + for (x = 0; x < xres; x++) + for (i = 0; i < 8; i++) + if (vmem16[(page * 8 + i) * xres + x]) + buf[x] |= BIT(i); + + /* Write data */ + ret = fbtft_write_buf_dc(par, buf, xres, 1); + if (ret < 0) + return ret; + } + + return 0; +} + +static void write_register(struct fbtft_par *par, int len, ...) +{ + va_list args; + int i; + + va_start(args, len); + + for (i = 0; i < len; i++) + par->buf[i] = va_arg(args, unsigned int); + + /* keep DC low for all command bytes to transfer */ + fbtft_write_buf_dc(par, par->buf, len, 0); + + va_end(args); +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .txbuflen = WIDTH, + .gamma_num = 1, + .gamma_len = 1, + /* set default contrast to 0xcd = 80% */ + .gamma = "cd", + .fbtftops = { + .write_vmem = write_vmem, + .write_register = write_register, + .init_display = init_display, + .set_addr_win = set_addr_win, + .blank = blank, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_SPI_DRIVER(DRVNAME, "sinowealth", "sh1106", &display); + +MODULE_DESCRIPTION("SH1106 OLED Driver"); +MODULE_AUTHOR("Heiner Kallweit"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ssd1289.c b/drivers/staging/fbtft/fb_ssd1289.c new file mode 100644 index 000000000..f27bab38b --- /dev/null +++ b/drivers/staging/fbtft/fb_ssd1289.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the SSD1289 LCD Controller + * + * Copyright (C) 2013 Noralf Tronnes + * + * Init sequence taken from ITDB02_Graph16.cpp - (C)2010-2011 Henning Karlsen + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ssd1289" +#define WIDTH 240 +#define HEIGHT 320 +#define DEFAULT_GAMMA "02 03 2 5 7 7 4 2 4 2\n" \ + "02 03 2 5 7 5 4 2 4 2" + +static unsigned int reg11 = 0x6040; +module_param(reg11, uint, 0000); +MODULE_PARM_DESC(reg11, "Register 11h value"); + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + write_reg(par, 0x00, 0x0001); + write_reg(par, 0x03, 0xA8A4); + write_reg(par, 0x0C, 0x0000); + write_reg(par, 0x0D, 0x080C); + write_reg(par, 0x0E, 0x2B00); + write_reg(par, 0x1E, 0x00B7); + write_reg(par, 0x01, + BIT(13) | (par->bgr << 11) | BIT(9) | (HEIGHT - 1)); + write_reg(par, 0x02, 0x0600); + write_reg(par, 0x10, 0x0000); + write_reg(par, 0x05, 0x0000); + write_reg(par, 0x06, 0x0000); + write_reg(par, 0x16, 0xEF1C); + write_reg(par, 0x17, 0x0003); + write_reg(par, 0x07, 0x0233); + write_reg(par, 0x0B, 0x0000); + write_reg(par, 0x0F, 0x0000); + write_reg(par, 0x41, 0x0000); + write_reg(par, 0x42, 0x0000); + write_reg(par, 0x48, 0x0000); + write_reg(par, 0x49, 0x013F); + write_reg(par, 0x4A, 0x0000); + write_reg(par, 0x4B, 0x0000); + write_reg(par, 0x44, 0xEF00); + write_reg(par, 0x45, 0x0000); + write_reg(par, 0x46, 0x013F); + write_reg(par, 0x23, 0x0000); + write_reg(par, 0x24, 0x0000); + write_reg(par, 0x25, 0x8000); + write_reg(par, 0x4f, 0x0000); + write_reg(par, 0x4e, 0x0000); + write_reg(par, 0x22); + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + switch (par->info->var.rotate) { + /* R4Eh - Set GDDRAM X address counter */ + /* R4Fh - Set GDDRAM Y address counter */ + case 0: + write_reg(par, 0x4e, xs); + write_reg(par, 0x4f, ys); + break; + case 180: + write_reg(par, 0x4e, par->info->var.xres - 1 - xs); + write_reg(par, 0x4f, par->info->var.yres - 1 - ys); + break; + case 270: + write_reg(par, 0x4e, par->info->var.yres - 1 - ys); + write_reg(par, 0x4f, xs); + break; + case 90: + write_reg(par, 0x4e, ys); + write_reg(par, 0x4f, par->info->var.xres - 1 - xs); + break; + } + + /* R22h - RAM data write */ + write_reg(par, 0x22); +} + +static int set_var(struct fbtft_par *par) +{ + if (par->fbtftops.init_display != init_display) { + /* don't risk messing up register 11h */ + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, + "%s: skipping since custom init_display() is used\n", + __func__); + return 0; + } + + switch (par->info->var.rotate) { + case 0: + write_reg(par, 0x11, reg11 | 0x30); + break; + case 270: + write_reg(par, 0x11, reg11 | 0x28); + break; + case 180: + write_reg(par, 0x11, reg11 | 0x00); + break; + case 90: + write_reg(par, 0x11, reg11 | 0x18); + break; + } + + return 0; +} + +/* + * Gamma string format: + * VRP0 VRP1 PRP0 PRP1 PKP0 PKP1 PKP2 PKP3 PKP4 PKP5 + * VRN0 VRN1 PRN0 PRN1 PKN0 PKN1 PKN2 PKN3 PKN4 PKN5 + */ +#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + static const unsigned long mask[] = { + 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + 0x1f, 0x1f, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + }; + int i, j; + + /* apply mask */ + for (i = 0; i < 2; i++) + for (j = 0; j < 10; j++) + CURVE(i, j) &= mask[i * par->gamma.num_values + j]; + + write_reg(par, 0x0030, CURVE(0, 5) << 8 | CURVE(0, 4)); + write_reg(par, 0x0031, CURVE(0, 7) << 8 | CURVE(0, 6)); + write_reg(par, 0x0032, CURVE(0, 9) << 8 | CURVE(0, 8)); + write_reg(par, 0x0033, CURVE(0, 3) << 8 | CURVE(0, 2)); + write_reg(par, 0x0034, CURVE(1, 5) << 8 | CURVE(1, 4)); + write_reg(par, 0x0035, CURVE(1, 7) << 8 | CURVE(1, 6)); + write_reg(par, 0x0036, CURVE(1, 9) << 8 | CURVE(1, 8)); + write_reg(par, 0x0037, CURVE(1, 3) << 8 | CURVE(1, 2)); + write_reg(par, 0x003A, CURVE(0, 1) << 8 | CURVE(0, 0)); + write_reg(par, 0x003B, CURVE(1, 1) << 8 | CURVE(1, 0)); + + return 0; +} + +#undef CURVE + +static struct fbtft_display display = { + .regwidth = 16, + .width = WIDTH, + .height = HEIGHT, + .gamma_num = 2, + .gamma_len = 10, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1289", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ssd1289"); +MODULE_ALIAS("platform:ssd1289"); + +MODULE_DESCRIPTION("FB driver for the SSD1289 LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ssd1305.c b/drivers/staging/fbtft/fb_ssd1305.c new file mode 100644 index 000000000..020fe48fe --- /dev/null +++ b/drivers/staging/fbtft/fb_ssd1305.c @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the SSD1305 OLED Controller + * + * based on SSD1306 driver by Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio/consumer.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ssd1305" + +#define WIDTH 128 +#define HEIGHT 64 + +/* + * write_reg() caveat: + * + * This doesn't work because D/C has to be LOW for both values: + * write_reg(par, val1, val2); + * + * Do it like this: + * write_reg(par, val1); + * write_reg(par, val2); + */ + +/* Init sequence taken from the Adafruit SSD1306 Arduino library */ +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + if (par->gamma.curves[0] == 0) { + mutex_lock(&par->gamma.lock); + if (par->info->var.yres == 64) + par->gamma.curves[0] = 0xCF; + else + par->gamma.curves[0] = 0x8F; + mutex_unlock(&par->gamma.lock); + } + + /* Set Display OFF */ + write_reg(par, 0xAE); + + /* Set Display Clock Divide Ratio/ Oscillator Frequency */ + write_reg(par, 0xD5); + write_reg(par, 0x80); + + /* Set Multiplex Ratio */ + write_reg(par, 0xA8); + if (par->info->var.yres == 64) + write_reg(par, 0x3F); + else + write_reg(par, 0x1F); + + /* Set Display Offset */ + write_reg(par, 0xD3); + write_reg(par, 0x0); + + /* Set Display Start Line */ + write_reg(par, 0x40 | 0x0); + + /* Charge Pump Setting */ + write_reg(par, 0x8D); + /* A[2] = 1b, Enable charge pump during display on */ + write_reg(par, 0x14); + + /* Set Memory Addressing Mode */ + write_reg(par, 0x20); + /* Vertical addressing mode */ + write_reg(par, 0x01); + + /* + * Set Segment Re-map + * column address 127 is mapped to SEG0 + */ + write_reg(par, 0xA0 | ((par->info->var.rotate == 180) ? 0x0 : 0x1)); + + /* + * Set COM Output Scan Direction + * remapped mode. Scan from COM[N-1] to COM0 + */ + write_reg(par, ((par->info->var.rotate == 180) ? 0xC8 : 0xC0)); + + /* Set COM Pins Hardware Configuration */ + write_reg(par, 0xDA); + if (par->info->var.yres == 64) { + /* A[4]=1b, Alternative COM pin configuration */ + write_reg(par, 0x12); + } else { + /* A[4]=0b, Sequential COM pin configuration */ + write_reg(par, 0x02); + } + + /* Set Pre-charge Period */ + write_reg(par, 0xD9); + write_reg(par, 0xF1); + + /* + * Entire Display ON + * Resume to RAM content display. Output follows RAM content + */ + write_reg(par, 0xA4); + + /* + * Set Normal Display + * 0 in RAM: OFF in display panel + * 1 in RAM: ON in display panel + */ + write_reg(par, 0xA6); + + /* Set Display ON */ + write_reg(par, 0xAF); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + /* Set Lower Column Start Address for Page Addressing Mode */ + write_reg(par, 0x00 | ((par->info->var.rotate == 180) ? 0x0 : 0x4)); + /* Set Higher Column Start Address for Page Addressing Mode */ + write_reg(par, 0x10 | 0x0); + /* Set Display Start Line */ + write_reg(par, 0x40 | 0x0); +} + +static int blank(struct fbtft_par *par, bool on) +{ + if (on) + write_reg(par, 0xAE); + else + write_reg(par, 0xAF); + return 0; +} + +/* Gamma is used to control Contrast */ +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + curves[0] &= 0xFF; + /* Set Contrast Control for BANK0 */ + write_reg(par, 0x81); + write_reg(par, curves[0]); + + return 0; +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16 = (u16 *)par->info->screen_buffer; + u8 *buf = par->txbuf.buf; + int x, y, i; + int ret; + + for (x = 0; x < par->info->var.xres; x++) { + for (y = 0; y < par->info->var.yres / 8; y++) { + *buf = 0x00; + for (i = 0; i < 8; i++) + *buf |= (vmem16[(y * 8 + i) * + par->info->var.xres + x] ? + 1 : 0) << i; + buf++; + } + } + + /* Write data */ + gpiod_set_value(par->gpio.dc, 1); + ret = par->fbtftops.write(par, par->txbuf.buf, + par->info->var.xres * par->info->var.yres / + 8); + if (ret < 0) + dev_err(par->info->device, "write failed and returned: %d\n", + ret); + return ret; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .txbuflen = WIDTH * HEIGHT / 8, + .gamma_num = 1, + .gamma_len = 1, + .gamma = "00", + .fbtftops = { + .write_vmem = write_vmem, + .init_display = init_display, + .set_addr_win = set_addr_win, + .blank = blank, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1305", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ssd1305"); +MODULE_ALIAS("platform:ssd1305"); + +MODULE_DESCRIPTION("SSD1305 OLED Driver"); +MODULE_AUTHOR("Alexey Mednyy"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ssd1306.c b/drivers/staging/fbtft/fb_ssd1306.c new file mode 100644 index 000000000..6cf9df579 --- /dev/null +++ b/drivers/staging/fbtft/fb_ssd1306.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the SSD1306 OLED Controller + * + * Copyright (C) 2013 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio/consumer.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ssd1306" +#define WIDTH 128 +#define HEIGHT 64 + +/* + * write_reg() caveat: + * + * This doesn't work because D/C has to be LOW for both values: + * write_reg(par, val1, val2); + * + * Do it like this: + * write_reg(par, val1); + * write_reg(par, val2); + */ + +/* Init sequence taken from the Adafruit SSD1306 Arduino library */ +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + if (par->gamma.curves[0] == 0) { + mutex_lock(&par->gamma.lock); + if (par->info->var.yres == 64) + par->gamma.curves[0] = 0xCF; + else + par->gamma.curves[0] = 0x8F; + mutex_unlock(&par->gamma.lock); + } + + /* Set Display OFF */ + write_reg(par, 0xAE); + + /* Set Display Clock Divide Ratio/ Oscillator Frequency */ + write_reg(par, 0xD5); + write_reg(par, 0x80); + + /* Set Multiplex Ratio */ + write_reg(par, 0xA8); + if (par->info->var.yres == 64) + write_reg(par, 0x3F); + else if (par->info->var.yres == 48) + write_reg(par, 0x2F); + else + write_reg(par, 0x1F); + + /* Set Display Offset */ + write_reg(par, 0xD3); + write_reg(par, 0x0); + + /* Set Display Start Line */ + write_reg(par, 0x40 | 0x0); + + /* Charge Pump Setting */ + write_reg(par, 0x8D); + /* A[2] = 1b, Enable charge pump during display on */ + write_reg(par, 0x14); + + /* Set Memory Addressing Mode */ + write_reg(par, 0x20); + /* Vertical addressing mode */ + write_reg(par, 0x01); + + /* Set Segment Re-map */ + /* column address 127 is mapped to SEG0 */ + write_reg(par, 0xA0 | 0x1); + + /* Set COM Output Scan Direction */ + /* remapped mode. Scan from COM[N-1] to COM0 */ + write_reg(par, 0xC8); + + /* Set COM Pins Hardware Configuration */ + write_reg(par, 0xDA); + if (par->info->var.yres == 64) + /* A[4]=1b, Alternative COM pin configuration */ + write_reg(par, 0x12); + else if (par->info->var.yres == 48) + /* A[4]=1b, Alternative COM pin configuration */ + write_reg(par, 0x12); + else + /* A[4]=0b, Sequential COM pin configuration */ + write_reg(par, 0x02); + + /* Set Pre-charge Period */ + write_reg(par, 0xD9); + write_reg(par, 0xF1); + + /* Set VCOMH Deselect Level */ + write_reg(par, 0xDB); + /* according to the datasheet, this value is out of bounds */ + write_reg(par, 0x40); + + /* Entire Display ON */ + /* Resume to RAM content display. Output follows RAM content */ + write_reg(par, 0xA4); + + /* Set Normal Display + * 0 in RAM: OFF in display panel + * 1 in RAM: ON in display panel + */ + write_reg(par, 0xA6); + + /* Set Display ON */ + write_reg(par, 0xAF); + + return 0; +} + +static void set_addr_win_64x48(struct fbtft_par *par) +{ + /* Set Column Address */ + write_reg(par, 0x21); + write_reg(par, 0x20); + write_reg(par, 0x5F); + + /* Set Page Address */ + write_reg(par, 0x22); + write_reg(par, 0x0); + write_reg(par, 0x5); +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + /* Set Lower Column Start Address for Page Addressing Mode */ + write_reg(par, 0x00 | 0x0); + /* Set Higher Column Start Address for Page Addressing Mode */ + write_reg(par, 0x10 | 0x0); + /* Set Display Start Line */ + write_reg(par, 0x40 | 0x0); + + if (par->info->var.xres == 64 && par->info->var.yres == 48) + set_addr_win_64x48(par); +} + +static int blank(struct fbtft_par *par, bool on) +{ + fbtft_par_dbg(DEBUG_BLANK, par, "(%s=%s)\n", + __func__, on ? "true" : "false"); + + if (on) + write_reg(par, 0xAE); + else + write_reg(par, 0xAF); + return 0; +} + +/* Gamma is used to control Contrast */ +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + /* apply mask */ + curves[0] &= 0xFF; + + /* Set Contrast Control for BANK0 */ + write_reg(par, 0x81); + write_reg(par, curves[0]); + + return 0; +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16 = (u16 *)par->info->screen_buffer; + u32 xres = par->info->var.xres; + u32 yres = par->info->var.yres; + u8 *buf = par->txbuf.buf; + int x, y, i; + int ret = 0; + + for (x = 0; x < xres; x++) { + for (y = 0; y < yres / 8; y++) { + *buf = 0x00; + for (i = 0; i < 8; i++) + if (vmem16[(y * 8 + i) * xres + x]) + *buf |= BIT(i); + buf++; + } + } + + /* Write data */ + gpiod_set_value(par->gpio.dc, 1); + ret = par->fbtftops.write(par, par->txbuf.buf, xres * yres / 8); + if (ret < 0) + dev_err(par->info->device, "write failed and returned: %d\n", + ret); + + return ret; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .gamma_num = 1, + .gamma_len = 1, + .gamma = "00", + .fbtftops = { + .write_vmem = write_vmem, + .init_display = init_display, + .set_addr_win = set_addr_win, + .blank = blank, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1306", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ssd1306"); +MODULE_ALIAS("platform:ssd1306"); + +MODULE_DESCRIPTION("SSD1306 OLED Driver"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ssd1325.c b/drivers/staging/fbtft/fb_ssd1325.c new file mode 100644 index 000000000..796a2ac3e --- /dev/null +++ b/drivers/staging/fbtft/fb_ssd1325.c @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the SSD1325 OLED Controller + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio/consumer.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ssd1325" + +#define WIDTH 128 +#define HEIGHT 64 +#define GAMMA_NUM 1 +#define GAMMA_LEN 15 +#define DEFAULT_GAMMA "7 1 1 1 1 2 2 3 3 4 4 5 5 6 6" + +/* + * write_reg() caveat: + * + * This doesn't work because D/C has to be LOW for both values: + * write_reg(par, val1, val2); + * + * Do it like this: + * write_reg(par, val1); + * write_reg(par, val2); + */ + +/* Init sequence taken from the Adafruit SSD1306 Arduino library */ +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + write_reg(par, 0xb3); + write_reg(par, 0xf0); + write_reg(par, 0xae); + write_reg(par, 0xa1); + write_reg(par, 0x00); + write_reg(par, 0xa8); + write_reg(par, 0x3f); + write_reg(par, 0xa0); + write_reg(par, 0x45); + write_reg(par, 0xa2); + write_reg(par, 0x40); + write_reg(par, 0x75); + write_reg(par, 0x00); + write_reg(par, 0x3f); + write_reg(par, 0x15); + write_reg(par, 0x00); + write_reg(par, 0x7f); + write_reg(par, 0xa4); + write_reg(par, 0xaf); + + return 0; +} + +static uint8_t rgb565_to_g16(u16 pixel) +{ + u16 b = pixel & 0x1f; + u16 g = (pixel & (0x3f << 5)) >> 5; + u16 r = (pixel & (0x1f << (5 + 6))) >> (5 + 6); + + pixel = (299 * r + 587 * g + 114 * b) / 195; + if (pixel > 255) + pixel = 255; + return (uint8_t)pixel / 16; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par, + "%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe, + ye); + + write_reg(par, 0x75); + write_reg(par, 0x00); + write_reg(par, 0x3f); + write_reg(par, 0x15); + write_reg(par, 0x00); + write_reg(par, 0x7f); +} + +static int blank(struct fbtft_par *par, bool on) +{ + fbtft_par_dbg(DEBUG_BLANK, par, "(%s=%s)\n", + __func__, on ? "true" : "false"); + + if (on) + write_reg(par, 0xAE); + else + write_reg(par, 0xAF); + return 0; +} + +/* + * Grayscale Lookup Table + * GS1 - GS15 + * The "Gamma curve" contains the relative values between the entries + * in the Lookup table. + * + * 0 = Setting of GS1 < Setting of GS2 < Setting of GS3.....< + * Setting of GS14 < Setting of GS15 + */ +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + int i; + + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__); + + for (i = 0; i < GAMMA_LEN; i++) { + if (i > 0 && curves[i] < 1) { + dev_err(par->info->device, + "Illegal value in Grayscale Lookup Table at index %d.\n" + "Must be greater than 0\n", i); + return -EINVAL; + } + if (curves[i] > 7) { + dev_err(par->info->device, + "Illegal value(s) in Grayscale Lookup Table.\n" + "At index=%d, the accumulated value has exceeded 7\n", + i); + return -EINVAL; + } + } + write_reg(par, 0xB8); + for (i = 0; i < 8; i++) + write_reg(par, (curves[i] & 0xFF)); + return 0; +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16 = (u16 *)par->info->screen_buffer; + u8 *buf = par->txbuf.buf; + u8 n1; + u8 n2; + int y, x; + int ret; + + for (x = 0; x < par->info->var.xres; x++) { + if (x % 2) + continue; + for (y = 0; y < par->info->var.yres; y++) { + n1 = rgb565_to_g16(vmem16[y * par->info->var.xres + x]); + n2 = rgb565_to_g16(vmem16 + [y * par->info->var.xres + x + 1]); + *buf = (n1 << 4) | n2; + buf++; + } + } + + gpiod_set_value(par->gpio.dc, 1); + + /* Write data */ + ret = par->fbtftops.write(par, par->txbuf.buf, + par->info->var.xres * par->info->var.yres / 2); + if (ret < 0) + dev_err(par->info->device, + "%s: write failed and returned: %d\n", __func__, ret); + + return ret; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .txbuflen = WIDTH * HEIGHT / 2, + .gamma_num = GAMMA_NUM, + .gamma_len = GAMMA_LEN, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .write_vmem = write_vmem, + .init_display = init_display, + .set_addr_win = set_addr_win, + .blank = blank, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1325", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ssd1325"); +MODULE_ALIAS("platform:ssd1325"); + +MODULE_DESCRIPTION("SSD1325 OLED Driver"); +MODULE_AUTHOR("Alexey Mednyy"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ssd1331.c b/drivers/staging/fbtft/fb_ssd1331.c new file mode 100644 index 000000000..ec5eced7f --- /dev/null +++ b/drivers/staging/fbtft/fb_ssd1331.c @@ -0,0 +1,204 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ssd1331" +#define WIDTH 96 +#define HEIGHT 64 +#define GAMMA_NUM 1 +#define GAMMA_LEN 63 +#define DEFAULT_GAMMA "0 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2" \ + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + write_reg(par, 0xae); /* Display Off */ + + /* Set Column Address Mapping, COM Scan Direction and Colour Depth */ + if (par->info->var.rotate == 180) + write_reg(par, 0xa0, 0x60 | (par->bgr << 2)); + else + write_reg(par, 0xa0, 0x72 | (par->bgr << 2)); + + write_reg(par, 0x72); /* RGB colour */ + write_reg(par, 0xa1, 0x00); /* Set Display Start Line */ + write_reg(par, 0xa2, 0x00); /* Set Display Offset */ + write_reg(par, 0xa4); /* NORMALDISPLAY */ + write_reg(par, 0xa8, 0x3f); /* Set multiplex */ + write_reg(par, 0xad, 0x8e); /* Set master */ + /* write_reg(par, 0xb0, 0x0b); Set power mode */ + write_reg(par, 0xb1, 0x31); /* Precharge */ + write_reg(par, 0xb3, 0xf0); /* Clock div */ + write_reg(par, 0x8a, 0x64); /* Precharge A */ + write_reg(par, 0x8b, 0x78); /* Precharge B */ + write_reg(par, 0x8c, 0x64); /* Precharge C */ + write_reg(par, 0xbb, 0x3a); /* Precharge level */ + write_reg(par, 0xbe, 0x3e); /* vcomh */ + write_reg(par, 0x87, 0x06); /* Master current */ + write_reg(par, 0x81, 0x91); /* Contrast A */ + write_reg(par, 0x82, 0x50); /* Contrast B */ + write_reg(par, 0x83, 0x7d); /* Contrast C */ + write_reg(par, 0xaf); /* Set Sleep Mode Display On */ + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, 0x15, xs, xe); + write_reg(par, 0x75, ys, ye); +} + +static void write_reg8_bus8(struct fbtft_par *par, int len, ...) +{ + va_list args; + int i, ret; + u8 *buf = par->buf; + + if (unlikely(par->debug & DEBUG_WRITE_REGISTER)) { + va_start(args, len); + for (i = 0; i < len; i++) + buf[i] = (u8)va_arg(args, unsigned int); + va_end(args); + fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par, par->info->device, + u8, buf, len, "%s: ", __func__); + } + + va_start(args, len); + + *buf = (u8)va_arg(args, unsigned int); + gpiod_set_value(par->gpio.dc, 0); + ret = par->fbtftops.write(par, par->buf, sizeof(u8)); + if (ret < 0) { + va_end(args); + dev_err(par->info->device, + "write() failed and returned %d\n", ret); + return; + } + len--; + + if (len) { + i = len; + while (i--) + *buf++ = (u8)va_arg(args, unsigned int); + ret = par->fbtftops.write(par, par->buf, len * (sizeof(u8))); + if (ret < 0) { + va_end(args); + dev_err(par->info->device, + "write() failed and returned %d\n", ret); + return; + } + } + gpiod_set_value(par->gpio.dc, 1); + va_end(args); +} + +/* + * Grayscale Lookup Table + * GS1 - GS63 + * The driver Gamma curve contains the relative values between the entries + * in the Lookup table. + * + * From datasheet: + * 8.8 Gray Scale Decoder + * + * there are total 180 Gamma Settings (Setting 0 to Setting 180) + * available for the Gray Scale table. + * + * The gray scale is defined in incremental way, with reference + * to the length of previous table entry: + * Setting of GS1 has to be >= 0 + * Setting of GS2 has to be > Setting of GS1 +1 + * Setting of GS3 has to be > Setting of GS2 +1 + * : + * Setting of GS63 has to be > Setting of GS62 +1 + * + */ +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + unsigned long tmp[GAMMA_NUM * GAMMA_LEN]; + int i, acc = 0; + + for (i = 0; i < 63; i++) { + if (i > 0 && curves[i] < 2) { + dev_err(par->info->device, + "Illegal value in Grayscale Lookup Table at index %d. Must be greater than 1\n", + i); + return -EINVAL; + } + acc += curves[i]; + tmp[i] = acc; + if (acc > 180) { + dev_err(par->info->device, + "Illegal value(s) in Grayscale Lookup Table. At index=%d, the accumulated value has exceeded 180\n", + i); + return -EINVAL; + } + } + + write_reg(par, 0xB8, + tmp[0], tmp[1], tmp[2], tmp[3], tmp[4], tmp[5], tmp[6], + tmp[7], tmp[8], tmp[9], tmp[10], tmp[11], tmp[12], tmp[13], + tmp[14], tmp[15], tmp[16], tmp[17], tmp[18], tmp[19], tmp[20], + tmp[21], tmp[22], tmp[23], tmp[24], tmp[25], tmp[26], tmp[27], + tmp[28], tmp[29], tmp[30], tmp[31], tmp[32], tmp[33], tmp[34], + tmp[35], tmp[36], tmp[37], tmp[38], tmp[39], tmp[40], tmp[41], + tmp[42], tmp[43], tmp[44], tmp[45], tmp[46], tmp[47], tmp[48], + tmp[49], tmp[50], tmp[51], tmp[52], tmp[53], tmp[54], tmp[55], + tmp[56], tmp[57], tmp[58], tmp[59], tmp[60], tmp[61], + tmp[62]); + + return 0; +} + +static int blank(struct fbtft_par *par, bool on) +{ + fbtft_par_dbg(DEBUG_BLANK, par, "(%s=%s)\n", + __func__, on ? "true" : "false"); + if (on) + write_reg(par, 0xAE); + else + write_reg(par, 0xAF); + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .gamma_num = GAMMA_NUM, + .gamma_len = GAMMA_LEN, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .write_register = write_reg8_bus8, + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_gamma = set_gamma, + .blank = blank, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1331", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ssd1331"); +MODULE_ALIAS("platform:ssd1331"); + +MODULE_DESCRIPTION("SSD1331 OLED Driver"); +MODULE_AUTHOR("Alec Smecher (adapted from SSD1351 by James Davies)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_ssd1351.c b/drivers/staging/fbtft/fb_ssd1351.c new file mode 100644 index 000000000..b8d55aa8c --- /dev/null +++ b/drivers/staging/fbtft/fb_ssd1351.c @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_ssd1351" +#define WIDTH 128 +#define HEIGHT 128 +#define GAMMA_NUM 1 +#define GAMMA_LEN 63 +#define DEFAULT_GAMMA "0 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2 2 " \ + "2 2 2 2 2 2 2" \ + +static void register_onboard_backlight(struct fbtft_par *par); + +static int init_display(struct fbtft_par *par) +{ + if (par->pdata && + par->pdata->display.backlight == FBTFT_ONBOARD_BACKLIGHT) { + /* module uses onboard GPIO for panel power */ + par->fbtftops.register_backlight = register_onboard_backlight; + } + + par->fbtftops.reset(par); + + write_reg(par, 0xfd, 0x12); /* Command Lock */ + write_reg(par, 0xfd, 0xb1); /* Command Lock */ + write_reg(par, 0xae); /* Display Off */ + write_reg(par, 0xb3, 0xf1); /* Front Clock Div */ + write_reg(par, 0xca, 0x7f); /* Set Mux Ratio */ + write_reg(par, 0x15, 0x00, 0x7f); /* Set Column Address */ + write_reg(par, 0x75, 0x00, 0x7f); /* Set Row Address */ + write_reg(par, 0xa1, 0x00); /* Set Display Start Line */ + write_reg(par, 0xa2, 0x00); /* Set Display Offset */ + write_reg(par, 0xb5, 0x00); /* Set GPIO */ + write_reg(par, 0xab, 0x01); /* Set Function Selection */ + write_reg(par, 0xb1, 0x32); /* Set Phase Length */ + write_reg(par, 0xb4, 0xa0, 0xb5, 0x55); /* Set Segment Low Voltage */ + write_reg(par, 0xbb, 0x17); /* Set Precharge Voltage */ + write_reg(par, 0xbe, 0x05); /* Set VComH Voltage */ + write_reg(par, 0xc1, 0xc8, 0x80, 0xc8); /* Set Contrast */ + write_reg(par, 0xc7, 0x0f); /* Set Master Contrast */ + write_reg(par, 0xb6, 0x01); /* Set Second Precharge Period */ + write_reg(par, 0xa6); /* Set Display Mode Reset */ + write_reg(par, 0xaf); /* Set Sleep Mode Display On */ + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, 0x15, xs, xe); + write_reg(par, 0x75, ys, ye); + write_reg(par, 0x5c); +} + +static int set_var(struct fbtft_par *par) +{ + unsigned int remap; + + if (par->fbtftops.init_display != init_display) { + /* don't risk messing up register A0h */ + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, + "%s: skipping since custom init_display() is used\n", + __func__); + return 0; + } + + remap = 0x60 | (par->bgr << 2); /* Set Colour Depth */ + + switch (par->info->var.rotate) { + case 0: + write_reg(par, 0xA0, remap | 0x00 | BIT(4)); + break; + case 270: + write_reg(par, 0xA0, remap | 0x03 | BIT(4)); + break; + case 180: + write_reg(par, 0xA0, remap | 0x02); + break; + case 90: + write_reg(par, 0xA0, remap | 0x01); + break; + } + + return 0; +} + +/* + * Grayscale Lookup Table + * GS1 - GS63 + * The driver Gamma curve contains the relative values between the entries + * in the Lookup table. + * + * From datasheet: + * 8.8 Gray Scale Decoder + * + * there are total 180 Gamma Settings (Setting 0 to Setting 180) + * available for the Gray Scale table. + * + * The gray scale is defined in incremental way, with reference + * to the length of previous table entry: + * Setting of GS1 has to be >= 0 + * Setting of GS2 has to be > Setting of GS1 +1 + * Setting of GS3 has to be > Setting of GS2 +1 + * : + * Setting of GS63 has to be > Setting of GS62 +1 + * + */ +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + unsigned long tmp[GAMMA_NUM * GAMMA_LEN]; + int i, acc = 0; + + for (i = 0; i < 63; i++) { + if (i > 0 && curves[i] < 2) { + dev_err(par->info->device, + "Illegal value in Grayscale Lookup Table at index %d : %d. Must be greater than 1\n", + i, curves[i]); + return -EINVAL; + } + acc += curves[i]; + tmp[i] = acc; + if (acc > 180) { + dev_err(par->info->device, + "Illegal value(s) in Grayscale Lookup Table. At index=%d : %d, the accumulated value has exceeded 180\n", + i, acc); + return -EINVAL; + } + } + + write_reg(par, 0xB8, + tmp[0], tmp[1], tmp[2], tmp[3], + tmp[4], tmp[5], tmp[6], tmp[7], + tmp[8], tmp[9], tmp[10], tmp[11], + tmp[12], tmp[13], tmp[14], tmp[15], + tmp[16], tmp[17], tmp[18], tmp[19], + tmp[20], tmp[21], tmp[22], tmp[23], + tmp[24], tmp[25], tmp[26], tmp[27], + tmp[28], tmp[29], tmp[30], tmp[31], + tmp[32], tmp[33], tmp[34], tmp[35], + tmp[36], tmp[37], tmp[38], tmp[39], + tmp[40], tmp[41], tmp[42], tmp[43], + tmp[44], tmp[45], tmp[46], tmp[47], + tmp[48], tmp[49], tmp[50], tmp[51], + tmp[52], tmp[53], tmp[54], tmp[55], + tmp[56], tmp[57], tmp[58], tmp[59], + tmp[60], tmp[61], tmp[62]); + + return 0; +} + +static int blank(struct fbtft_par *par, bool on) +{ + fbtft_par_dbg(DEBUG_BLANK, par, "(%s=%s)\n", + __func__, on ? "true" : "false"); + if (on) + write_reg(par, 0xAE); + else + write_reg(par, 0xAF); + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .gamma_num = GAMMA_NUM, + .gamma_len = GAMMA_LEN, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + .blank = blank, + }, +}; + +static int update_onboard_backlight(struct backlight_device *bd) +{ + struct fbtft_par *par = bl_get_data(bd); + bool on; + + fbtft_par_dbg(DEBUG_BACKLIGHT, par, + "%s: power=%d, fb_blank=%d\n", + __func__, bd->props.power, bd->props.fb_blank); + + on = !backlight_is_blank(bd); + /* Onboard backlight connected to GPIO0 on SSD1351, GPIO1 unused */ + write_reg(par, 0xB5, on ? 0x03 : 0x02); + + return 0; +} + +static const struct backlight_ops bl_ops = { + .update_status = update_onboard_backlight, +}; + +static void register_onboard_backlight(struct fbtft_par *par) +{ + struct backlight_device *bd; + struct backlight_properties bl_props = { 0, }; + + bl_props.type = BACKLIGHT_RAW; + bl_props.power = FB_BLANK_POWERDOWN; + + bd = backlight_device_register(dev_driver_string(par->info->device), + par->info->device, par, &bl_ops, + &bl_props); + if (IS_ERR(bd)) { + dev_err(par->info->device, + "cannot register backlight device (%ld)\n", + PTR_ERR(bd)); + return; + } + par->info->bl_dev = bd; + + if (!par->fbtftops.unregister_backlight) + par->fbtftops.unregister_backlight = fbtft_unregister_backlight; +} + +FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1351", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:ssd1351"); +MODULE_ALIAS("platform:ssd1351"); + +MODULE_DESCRIPTION("SSD1351 OLED Driver"); +MODULE_AUTHOR("James Davies"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_st7735r.c b/drivers/staging/fbtft/fb_st7735r.c new file mode 100644 index 000000000..9670a8989 --- /dev/null +++ b/drivers/staging/fbtft/fb_st7735r.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the ST7735R LCD Controller + * + * Copyright (C) 2013 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_st7735r" +#define DEFAULT_GAMMA "0F 1A 0F 18 2F 28 20 22 1F 1B 23 37 00 07 02 10\n" \ + "0F 1B 0F 17 33 2C 29 2E 30 30 39 3F 00 07 03 10" + +static const s16 default_init_sequence[] = { + -1, MIPI_DCS_SOFT_RESET, + -2, 150, /* delay */ + + -1, MIPI_DCS_EXIT_SLEEP_MODE, + -2, 500, /* delay */ + + /* FRMCTR1 - frame rate control: normal mode + * frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D) + */ + -1, 0xB1, 0x01, 0x2C, 0x2D, + + /* FRMCTR2 - frame rate control: idle mode + * frame rate = fosc / (1 x 2 + 40) * (LINE + 2C + 2D) + */ + -1, 0xB2, 0x01, 0x2C, 0x2D, + + /* FRMCTR3 - frame rate control - partial mode + * dot inversion mode, line inversion mode + */ + -1, 0xB3, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D, + + /* INVCTR - display inversion control + * no inversion + */ + -1, 0xB4, 0x07, + + /* PWCTR1 - Power Control + * -4.6V, AUTO mode + */ + -1, 0xC0, 0xA2, 0x02, 0x84, + + /* PWCTR2 - Power Control + * VGH25 = 2.4C VGSEL = -10 VGH = 3 * AVDD + */ + -1, 0xC1, 0xC5, + + /* PWCTR3 - Power Control + * Opamp current small, Boost frequency + */ + -1, 0xC2, 0x0A, 0x00, + + /* PWCTR4 - Power Control + * BCLK/2, Opamp current small & Medium low + */ + -1, 0xC3, 0x8A, 0x2A, + + /* PWCTR5 - Power Control */ + -1, 0xC4, 0x8A, 0xEE, + + /* VMCTR1 - Power Control */ + -1, 0xC5, 0x0E, + + -1, MIPI_DCS_EXIT_INVERT_MODE, + + -1, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT, + + -1, MIPI_DCS_SET_DISPLAY_ON, + -2, 100, /* delay */ + + -1, MIPI_DCS_ENTER_NORMAL_MODE, + -2, 10, /* delay */ + + /* end marker */ + -3 +}; + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF); + + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF); + + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +#define MY BIT(7) +#define MX BIT(6) +#define MV BIT(5) +static int set_var(struct fbtft_par *par) +{ + /* MADCTL - Memory data access control + * RGB/BGR: + * 1. Mode selection pin SRGB + * RGB H/W pin for color filter setting: 0=RGB, 1=BGR + * 2. MADCTL RGB bit + * RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR + */ + switch (par->info->var.rotate) { + case 0: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MX | MY | (par->bgr << 3)); + break; + case 270: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MY | MV | (par->bgr << 3)); + break; + case 180: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + par->bgr << 3); + break; + case 90: + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, + MX | MV | (par->bgr << 3)); + break; + } + + return 0; +} + +/* + * Gamma string format: + * VRF0P VOS0P PK0P PK1P PK2P PK3P PK4P PK5P PK6P PK7P PK8P PK9P SELV0P SELV1P SELV62P SELV63P + * VRF0N VOS0N PK0N PK1N PK2N PK3N PK4N PK5N PK6N PK7N PK8N PK9N SELV0N SELV1N SELV62N SELV63N + */ +#define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + int i, j; + + /* apply mask */ + for (i = 0; i < par->gamma.num_curves; i++) + for (j = 0; j < par->gamma.num_values; j++) + CURVE(i, j) &= 0x3f; + + for (i = 0; i < par->gamma.num_curves; i++) + write_reg(par, 0xE0 + i, + CURVE(i, 0), CURVE(i, 1), + CURVE(i, 2), CURVE(i, 3), + CURVE(i, 4), CURVE(i, 5), + CURVE(i, 6), CURVE(i, 7), + CURVE(i, 8), CURVE(i, 9), + CURVE(i, 10), CURVE(i, 11), + CURVE(i, 12), CURVE(i, 13), + CURVE(i, 14), CURVE(i, 15)); + + return 0; +} + +#undef CURVE + +static struct fbtft_display display = { + .regwidth = 8, + .width = 128, + .height = 160, + .init_sequence = default_init_sequence, + .gamma_num = 2, + .gamma_len = 16, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .set_addr_win = set_addr_win, + .set_var = set_var, + .set_gamma = set_gamma, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "sitronix,st7735r", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:st7735r"); +MODULE_ALIAS("platform:st7735r"); + +MODULE_DESCRIPTION("FB driver for the ST7735R LCD Controller"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c new file mode 100644 index 000000000..861a15414 --- /dev/null +++ b/drivers/staging/fbtft/fb_st7789v.c @@ -0,0 +1,394 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the ST7789V LCD Controller + * + * Copyright (C) 2015 Dennis Menschel + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/completion.h> +#include <linux/module.h> + +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_st7789v" + +#define DEFAULT_GAMMA \ + "70 2C 2E 15 10 09 48 33 53 0B 19 18 20 25\n" \ + "70 2C 2E 15 10 09 48 33 53 0B 19 18 20 25" + +#define HSD20_IPS_GAMMA \ + "D0 05 0A 09 08 05 2E 44 45 0F 17 16 2B 33\n" \ + "D0 05 0A 09 08 05 2E 43 45 0F 16 16 2B 33" + +#define HSD20_IPS 1 + +/** + * enum st7789v_command - ST7789V display controller commands + * + * @PORCTRL: porch setting + * @GCTRL: gate control + * @VCOMS: VCOM setting + * @VDVVRHEN: VDV and VRH command enable + * @VRHS: VRH set + * @VDVS: VDV set + * @VCMOFSET: VCOM offset set + * @PWCTRL1: power control 1 + * @PVGAMCTRL: positive voltage gamma control + * @NVGAMCTRL: negative voltage gamma control + * + * The command names are the same as those found in the datasheet to ease + * looking up their semantics and usage. + * + * Note that the ST7789V display controller offers quite a few more commands + * which have been omitted from this list as they are not used at the moment. + * Furthermore, commands that are compliant with the MIPI DCS have been left + * out as well to avoid duplicate entries. + */ +enum st7789v_command { + PORCTRL = 0xB2, + GCTRL = 0xB7, + VCOMS = 0xBB, + VDVVRHEN = 0xC2, + VRHS = 0xC3, + VDVS = 0xC4, + VCMOFSET = 0xC5, + PWCTRL1 = 0xD0, + PVGAMCTRL = 0xE0, + NVGAMCTRL = 0xE1, +}; + +#define MADCTL_BGR BIT(3) /* bitmask for RGB/BGR order */ +#define MADCTL_MV BIT(5) /* bitmask for page/column order */ +#define MADCTL_MX BIT(6) /* bitmask for column address order */ +#define MADCTL_MY BIT(7) /* bitmask for page address order */ + +/* 60Hz for 16.6ms, configured as 2*16.6ms */ +#define PANEL_TE_TIMEOUT_MS 33 + +static struct completion panel_te; /* completion for panel TE line */ +static int irq_te; /* Linux IRQ for LCD TE line */ + +static irqreturn_t panel_te_handler(int irq, void *data) +{ + complete(&panel_te); + return IRQ_HANDLED; +} + +/* + * init_tearing_effect_line() - init tearing effect line. + * @par: FBTFT parameter object. + * + * Return: 0 on success, or a negative error code otherwise. + */ +static int init_tearing_effect_line(struct fbtft_par *par) +{ + struct device *dev = par->info->device; + struct gpio_desc *te; + int rc, irq; + + te = gpiod_get_optional(dev, "te", GPIOD_IN); + if (IS_ERR(te)) + return dev_err_probe(dev, PTR_ERR(te), "Failed to request te GPIO\n"); + + /* if te is NULL, indicating no configuration, directly return success */ + if (!te) { + irq_te = 0; + return 0; + } + + irq = gpiod_to_irq(te); + + /* GPIO is locked as an IRQ, we may drop the reference */ + gpiod_put(te); + + if (irq < 0) + return irq; + + irq_te = irq; + init_completion(&panel_te); + + /* The effective state is high and lasts no more than 1000 microseconds */ + rc = devm_request_irq(dev, irq_te, panel_te_handler, + IRQF_TRIGGER_RISING, "TE_GPIO", par); + if (rc) + return dev_err_probe(dev, rc, "TE IRQ request failed.\n"); + + disable_irq_nosync(irq_te); + + return 0; +} + +/** + * init_display() - initialize the display controller + * + * @par: FBTFT parameter object + * + * Most of the commands in this init function set their parameters to the + * same default values which are already in place after the display has been + * powered up. (The main exception to this rule is the pixel format which + * would default to 18 instead of 16 bit per pixel.) + * Nonetheless, this sequence can be used as a template for concrete + * displays which usually need some adjustments. + * + * Return: 0 on success, < 0 if error occurred. + */ +static int init_display(struct fbtft_par *par) +{ + int rc; + + par->fbtftops.reset(par); + + rc = init_tearing_effect_line(par); + if (rc) + return rc; + + /* turn off sleep mode */ + write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); + mdelay(120); + + /* set pixel format to RGB-565 */ + write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); + if (HSD20_IPS) + write_reg(par, PORCTRL, 0x05, 0x05, 0x00, 0x33, 0x33); + + else + write_reg(par, PORCTRL, 0x08, 0x08, 0x00, 0x22, 0x22); + + /* + * VGH = 13.26V + * VGL = -10.43V + */ + if (HSD20_IPS) + write_reg(par, GCTRL, 0x75); + else + write_reg(par, GCTRL, 0x35); + + /* + * VDV and VRH register values come from command write + * (instead of NVM) + */ + write_reg(par, VDVVRHEN, 0x01, 0xFF); + + /* + * VAP = 4.1V + (VCOM + VCOM offset + 0.5 * VDV) + * VAN = -4.1V + (VCOM + VCOM offset + 0.5 * VDV) + */ + if (HSD20_IPS) + write_reg(par, VRHS, 0x13); + else + write_reg(par, VRHS, 0x0B); + + /* VDV = 0V */ + write_reg(par, VDVS, 0x20); + + /* VCOM = 0.9V */ + if (HSD20_IPS) + write_reg(par, VCOMS, 0x22); + else + write_reg(par, VCOMS, 0x20); + + /* VCOM offset = 0V */ + write_reg(par, VCMOFSET, 0x20); + + /* + * AVDD = 6.8V + * AVCL = -4.8V + * VDS = 2.3V + */ + write_reg(par, PWCTRL1, 0xA4, 0xA1); + + /* TE line output is off by default when powering on */ + if (irq_te) + write_reg(par, MIPI_DCS_SET_TEAR_ON, 0x00); + + write_reg(par, MIPI_DCS_SET_DISPLAY_ON); + + if (HSD20_IPS) + write_reg(par, MIPI_DCS_ENTER_INVERT_MODE); + + return 0; +} + +/* + * write_vmem() - write data to display. + * @par: FBTFT parameter object. + * @offset: offset from screen_buffer. + * @len: the length of data to be writte. + * + * Return: 0 on success, or a negative error code otherwise. + */ +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + struct device *dev = par->info->device; + int ret; + + if (irq_te) { + enable_irq(irq_te); + reinit_completion(&panel_te); + ret = wait_for_completion_timeout(&panel_te, + msecs_to_jiffies(PANEL_TE_TIMEOUT_MS)); + if (ret == 0) + dev_err(dev, "wait panel TE timeout\n"); + + disable_irq(irq_te); + } + + switch (par->pdata->display.buswidth) { + case 8: + ret = fbtft_write_vmem16_bus8(par, offset, len); + break; + case 9: + ret = fbtft_write_vmem16_bus9(par, offset, len); + break; + case 16: + ret = fbtft_write_vmem16_bus16(par, offset, len); + break; + default: + dev_err(dev, "Unsupported buswidth %d\n", + par->pdata->display.buswidth); + ret = 0; + break; + } + + return ret; +} + +/** + * set_var() - apply LCD properties like rotation and BGR mode + * + * @par: FBTFT parameter object + * + * Return: 0 on success, < 0 if error occurred. + */ +static int set_var(struct fbtft_par *par) +{ + u8 madctl_par = 0; + + if (par->bgr) + madctl_par |= MADCTL_BGR; + switch (par->info->var.rotate) { + case 0: + break; + case 90: + madctl_par |= (MADCTL_MV | MADCTL_MY); + break; + case 180: + madctl_par |= (MADCTL_MX | MADCTL_MY); + break; + case 270: + madctl_par |= (MADCTL_MV | MADCTL_MX); + break; + default: + return -EINVAL; + } + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, madctl_par); + return 0; +} + +/** + * set_gamma() - set gamma curves + * + * @par: FBTFT parameter object + * @curves: gamma curves + * + * Before the gamma curves are applied, they are preprocessed with a bitmask + * to ensure syntactically correct input for the display controller. + * This implies that the curves input parameter might be changed by this + * function and that illegal gamma values are auto-corrected and not + * reported as errors. + * + * Return: 0 on success, < 0 if error occurred. + */ +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + int i; + int j; + int c; /* curve index offset */ + + /* + * Bitmasks for gamma curve command parameters. + * The masks are the same for both positive and negative voltage + * gamma curves. + */ + static const u8 gamma_par_mask[] = { + 0xFF, /* V63[3:0], V0[3:0]*/ + 0x3F, /* V1[5:0] */ + 0x3F, /* V2[5:0] */ + 0x1F, /* V4[4:0] */ + 0x1F, /* V6[4:0] */ + 0x3F, /* J0[1:0], V13[3:0] */ + 0x7F, /* V20[6:0] */ + 0x77, /* V36[2:0], V27[2:0] */ + 0x7F, /* V43[6:0] */ + 0x3F, /* J1[1:0], V50[3:0] */ + 0x1F, /* V57[4:0] */ + 0x1F, /* V59[4:0] */ + 0x3F, /* V61[5:0] */ + 0x3F, /* V62[5:0] */ + }; + + for (i = 0; i < par->gamma.num_curves; i++) { + c = i * par->gamma.num_values; + for (j = 0; j < par->gamma.num_values; j++) + curves[c + j] &= gamma_par_mask[j]; + write_reg(par, PVGAMCTRL + i, + curves[c + 0], curves[c + 1], curves[c + 2], + curves[c + 3], curves[c + 4], curves[c + 5], + curves[c + 6], curves[c + 7], curves[c + 8], + curves[c + 9], curves[c + 10], curves[c + 11], + curves[c + 12], curves[c + 13]); + } + return 0; +} + +/** + * blank() - blank the display + * + * @par: FBTFT parameter object + * @on: whether to enable or disable blanking the display + * + * Return: 0 on success, < 0 if error occurred. + */ +static int blank(struct fbtft_par *par, bool on) +{ + if (on) + write_reg(par, MIPI_DCS_SET_DISPLAY_OFF); + else + write_reg(par, MIPI_DCS_SET_DISPLAY_ON); + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = 240, + .height = 320, + .gamma_num = 2, + .gamma_len = 14, + .gamma = HSD20_IPS_GAMMA, + .fbtftops = { + .init_display = init_display, + .write_vmem = write_vmem, + .set_var = set_var, + .set_gamma = set_gamma, + .blank = blank, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "sitronix,st7789v", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:st7789v"); +MODULE_ALIAS("platform:st7789v"); + +MODULE_DESCRIPTION("FB driver for the ST7789V LCD Controller"); +MODULE_AUTHOR("Dennis Menschel"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_tinylcd.c b/drivers/staging/fbtft/fb_tinylcd.c new file mode 100644 index 000000000..9469248f2 --- /dev/null +++ b/drivers/staging/fbtft/fb_tinylcd.c @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Custom FB driver for tinylcd.com display + * + * Copyright (C) 2013 Noralf Tronnes + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <video/mipi_display.h> + +#include "fbtft.h" + +#define DRVNAME "fb_tinylcd" +#define WIDTH 320 +#define HEIGHT 480 + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + write_reg(par, 0xB0, 0x80); + write_reg(par, 0xC0, 0x0A, 0x0A); + write_reg(par, 0xC1, 0x45, 0x07); + write_reg(par, 0xC2, 0x33); + write_reg(par, 0xC5, 0x00, 0x42, 0x80); + write_reg(par, 0xB1, 0xD0, 0x11); + write_reg(par, 0xB4, 0x02); + write_reg(par, 0xB6, 0x00, 0x22, 0x3B); + write_reg(par, 0xB7, 0x07); + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x58); + write_reg(par, 0xF0, 0x36, 0xA5, 0xD3); + write_reg(par, 0xE5, 0x80); + write_reg(par, 0xE5, 0x01); + write_reg(par, 0xB3, 0x00); + write_reg(par, 0xE5, 0x00); + write_reg(par, 0xF0, 0x36, 0xA5, 0x53); + write_reg(par, 0xE0, 0x00, 0x35, 0x33, 0x00, 0x00, 0x00, + 0x00, 0x35, 0x33, 0x00, 0x00, 0x00); + write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); + write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); + udelay(250); + write_reg(par, MIPI_DCS_SET_DISPLAY_ON); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF); + + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF); + + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + case 270: + write_reg(par, 0xB6, 0x00, 0x02, 0x3B); + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x28); + break; + case 180: + write_reg(par, 0xB6, 0x00, 0x22, 0x3B); + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x58); + break; + case 90: + write_reg(par, 0xB6, 0x00, 0x22, 0x3B); + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x38); + break; + default: + write_reg(par, 0xB6, 0x00, 0x22, 0x3B); + write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, 0x08); + break; + } + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "neosec,tinylcd", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("spi:tinylcd"); + +MODULE_DESCRIPTION("Custom FB driver for tinylcd.com display"); +MODULE_AUTHOR("Noralf Tronnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_tls8204.c b/drivers/staging/fbtft/fb_tls8204.c new file mode 100644 index 000000000..bec6dd0ff --- /dev/null +++ b/drivers/staging/fbtft/fb_tls8204.c @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the TLS8204 LCD Controller + * + * The display is monochrome and the video memory is RGB565. + * Any pixel value except 0 turns the pixel on. + * + * Copyright (C) 2013 Noralf Tronnes + * Copyright (C) 2014 Michael Hope (adapted for the TLS8204) + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_tls8204" +#define WIDTH 84 +#define HEIGHT 48 +#define TXBUFLEN WIDTH + +/* gamma is used to control contrast in this driver */ +#define DEFAULT_GAMMA "40" + +static unsigned int bs = 4; +module_param(bs, uint, 0000); +MODULE_PARM_DESC(bs, "BS[2:0] Bias voltage level: 0-7 (default: 4)"); + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* Enter extended command mode */ + write_reg(par, 0x21); /* 5:1 1 + * 2:0 PD - Powerdown control: chip is active + * 1:0 V - Entry mode: horizontal addressing + * 0:1 H - Extended instruction set control: + * extended + */ + + /* H=1 Bias system */ + write_reg(par, 0x10 | (bs & 0x7)); + /* 4:1 1 + * 3:0 0 + * 2:x BS2 - Bias System + * 1:x BS1 + * 0:x BS0 + */ + + /* Set the address of the first display line. */ + write_reg(par, 0x04 | (64 >> 6)); + write_reg(par, 0x40 | (64 & 0x3F)); + + /* Enter H=0 standard command mode */ + write_reg(par, 0x20); + + /* H=0 Display control */ + write_reg(par, 0x08 | 4); + /* 3:1 1 + * 2:1 D - DE: 10=normal mode + * 1:0 0 + * 0:0 E + */ + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + /* H=0 Set X address of RAM */ + write_reg(par, 0x80); /* 7:1 1 + * 6-0: X[6:0] - 0x00 + */ + + /* H=0 Set Y address of RAM */ + write_reg(par, 0x40); /* 7:0 0 + * 6:1 1 + * 2-0: Y[2:0] - 0x0 + */ +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16 = (u16 *)par->info->screen_buffer; + int x, y, i; + int ret = 0; + + for (y = 0; y < HEIGHT / 8; y++) { + u8 *buf = par->txbuf.buf; + /* The display is 102x68 but the LCD is 84x48. + * Set the write pointer at the start of each row. + */ + gpiod_set_value(par->gpio.dc, 0); + write_reg(par, 0x80 | 0); + write_reg(par, 0x40 | y); + + for (x = 0; x < WIDTH; x++) { + u8 ch = 0; + + for (i = 0; i < 8 * WIDTH; i += WIDTH) { + ch >>= 1; + if (vmem16[(y * 8 * WIDTH) + i + x]) + ch |= 0x80; + } + *buf++ = ch; + } + /* Write the row */ + gpiod_set_value(par->gpio.dc, 1); + ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH); + if (ret < 0) { + dev_err(par->info->device, + "write failed and returned: %d\n", ret); + break; + } + } + + return ret; +} + +static int set_gamma(struct fbtft_par *par, u32 *curves) +{ + /* apply mask */ + curves[0] &= 0x7F; + + write_reg(par, 0x21); /* turn on extended instruction set */ + write_reg(par, 0x80 | curves[0]); + write_reg(par, 0x20); /* turn off extended instruction set */ + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .txbuflen = TXBUFLEN, + .gamma_num = 1, + .gamma_len = 1, + .gamma = DEFAULT_GAMMA, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .write_vmem = write_vmem, + .set_gamma = set_gamma, + }, + .backlight = 1, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "teralane,tls8204", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("spi:tls8204"); + +MODULE_DESCRIPTION("FB driver for the TLS8204 LCD Controller"); +MODULE_AUTHOR("Michael Hope"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_uc1611.c b/drivers/staging/fbtft/fb_uc1611.c new file mode 100644 index 000000000..f61e373c7 --- /dev/null +++ b/drivers/staging/fbtft/fb_uc1611.c @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the UltraChip UC1611 LCD controller + * + * The display is 4-bit grayscale (16 shades) 240x160. + * + * Copyright (C) 2015 Henri Chain + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_uc1611" +#define WIDTH 240 +#define HEIGHT 160 +#define BPP 8 +#define FPS 40 + +/* + * LCD voltage is a combination of ratio, gain, pot and temp + * + * V_LCD = V_BIAS * ratio + * V_LCD = (C_V0 + C_PM × pot) * (1 + (T - 25) * temp) + * C_V0 and C_PM depend on ratio and gain + * T is ambient temperature + */ + +/* BR -> actual ratio: 0-3 -> 5, 10, 11, 13 */ +static unsigned int ratio = 2; +module_param(ratio, uint, 0000); +MODULE_PARM_DESC(ratio, "BR[1:0] Bias voltage ratio: 0-3 (default: 2)"); + +static unsigned int gain = 3; +module_param(gain, uint, 0000); +MODULE_PARM_DESC(gain, "GN[1:0] Bias voltage gain: 0-3 (default: 3)"); + +static unsigned int pot = 16; +module_param(pot, uint, 0000); +MODULE_PARM_DESC(pot, "PM[6:0] Bias voltage pot.: 0-63 (default: 16)"); + +/* TC -> % compensation per deg C: 0-3 -> -.05, -.10, -.015, -.20 */ +static unsigned int temp; +module_param(temp, uint, 0000); +MODULE_PARM_DESC(temp, "TC[1:0] Temperature compensation: 0-3 (default: 0)"); + +/* PC[1:0] -> LCD capacitance: 0-3 -> <20nF, 20-28 nF, 29-40 nF, 40-56 nF */ +static unsigned int load = 1; +module_param(load, uint, 0000); +MODULE_PARM_DESC(load, "PC[1:0] Panel Loading: 0-3 (default: 1)"); + +/* PC[3:2] -> V_LCD: 0, 1, 3 -> ext., int. with ratio = 5, int. standard */ +static unsigned int pump = 3; +module_param(pump, uint, 0000); +MODULE_PARM_DESC(pump, "PC[3:2] Pump control: 0,1,3 (default: 3)"); + +static int init_display(struct fbtft_par *par) +{ + int ret; + + /* + * Set CS active inverse polarity: just setting SPI_CS_HIGH does not + * work with GPIO based chip selects that are logically active high + * but inverted inside the GPIO library, so enforce inverted + * semantics. + */ + par->spi->mode ^= SPI_CS_HIGH; + ret = spi_setup(par->spi); + if (ret) { + dev_err(par->info->device, + "Could not set inverse CS polarity\n"); + return ret; + } + + /* Reset controller */ + write_reg(par, 0xE2); + + /* Set bias ratio */ + write_reg(par, 0xE8 | (ratio & 0x03)); + + /* Set bias gain and potentiometer */ + write_reg(par, 0x81); + write_reg(par, (gain & 0x03) << 6 | (pot & 0x3F)); + + /* Set temperature compensation */ + write_reg(par, 0x24 | (temp & 0x03)); + + /* Set panel loading */ + write_reg(par, 0x28 | (load & 0x03)); + + /* Set pump control */ + write_reg(par, 0x2C | (pump & 0x03)); + + /* Set inverse display */ + write_reg(par, 0xA6 | 0x01); + + /* Set 4-bit grayscale mode */ + write_reg(par, 0xD0 | (0x02 & 0x03)); + + /* Set Display enable */ + write_reg(par, 0xA8 | 0x07); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + switch (par->info->var.rotate) { + case 90: + case 270: + /* Set column address */ + write_reg(par, ys & 0x0F); + write_reg(par, 0x10 | (ys >> 4)); + + /* Set page address (divide xs by 2) (not used by driver) */ + write_reg(par, 0x60 | ((xs >> 1) & 0x0F)); + write_reg(par, 0x70 | (xs >> 5)); + break; + default: + /* Set column address (not used by driver) */ + write_reg(par, xs & 0x0F); + write_reg(par, 0x10 | (xs >> 4)); + + /* Set page address (divide ys by 2) */ + write_reg(par, 0x60 | ((ys >> 1) & 0x0F)); + write_reg(par, 0x70 | (ys >> 5)); + break; + } +} + +static int blank(struct fbtft_par *par, bool on) +{ + fbtft_par_dbg(DEBUG_BLANK, par, "(%s=%s)\n", + __func__, on ? "true" : "false"); + + if (on) + write_reg(par, 0xA8 | 0x00); + else + write_reg(par, 0xA8 | 0x07); + return 0; +} + +static int set_var(struct fbtft_par *par) +{ + /* par->info->fix.visual = FB_VISUAL_PSEUDOCOLOR; */ + par->info->var.grayscale = 1; + par->info->var.red.offset = 0; + par->info->var.red.length = 8; + par->info->var.green.offset = 0; + par->info->var.green.length = 8; + par->info->var.blue.offset = 0; + par->info->var.blue.length = 8; + par->info->var.transp.offset = 0; + par->info->var.transp.length = 0; + + switch (par->info->var.rotate) { + case 90: + /* Set RAM address control */ + write_reg(par, 0x88 + | (0x0 & 0x1) << 2 /* Increment positively */ + | (0x1 << 1) /* Increment page first */ + | 0x1); /* Wrap around (default) */ + + /* Set LCD mapping */ + write_reg(par, 0xC0 + | (0x0 & 0x1) << 2 /* Mirror Y OFF */ + | (0x0 & 0x1) << 1 /* Mirror X OFF */ + | (0x0 & 0x1)); /* MS nibble last (default) */ + break; + case 180: + /* Set RAM address control */ + write_reg(par, 0x88 + | (0x0 & 0x1) << 2 /* Increment positively */ + | (0x0 & 0x1) << 1 /* Increment column first */ + | 0x1); /* Wrap around (default) */ + + /* Set LCD mapping */ + write_reg(par, 0xC0 + | (0x1 << 2) /* Mirror Y ON */ + | (0x0 & 0x1) << 1 /* Mirror X OFF */ + | (0x0 & 0x1)); /* MS nibble last (default) */ + break; + case 270: + /* Set RAM address control */ + write_reg(par, 0x88 + | (0x0 & 0x1) << 2 /* Increment positively */ + | (0x1 << 1) /* Increment page first */ + | 0x1); /* Wrap around (default) */ + + /* Set LCD mapping */ + write_reg(par, 0xC0 + | (0x1 << 2) /* Mirror Y ON */ + | (0x1 << 1) /* Mirror X ON */ + | (0x0 & 0x1)); /* MS nibble last (default) */ + break; + default: + /* Set RAM address control */ + write_reg(par, 0x88 + | (0x0 & 0x1) << 2 /* Increment positively */ + | (0x0 & 0x1) << 1 /* Increment column first */ + | 0x1); /* Wrap around (default) */ + + /* Set LCD mapping */ + write_reg(par, 0xC0 + | (0x0 & 0x1) << 2 /* Mirror Y OFF */ + | (0x1 << 1) /* Mirror X ON */ + | (0x0 & 0x1)); /* MS nibble last (default) */ + break; + } + + return 0; +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + u8 *vmem8 = (u8 *)(par->info->screen_buffer); + u8 *buf8 = par->txbuf.buf; + u16 *buf16 = par->txbuf.buf; + int line_length = par->info->fix.line_length; + int y_start = offset / line_length; + int y_end = (offset + len - 1) / line_length; + int x, y, i; + int ret = 0; + + switch (par->pdata->display.buswidth) { + case 8: + switch (par->info->var.rotate) { + case 90: + case 270: + i = y_start * line_length; + for (y = y_start; y <= y_end; y++) { + for (x = 0; x < line_length; x += 2) { + *buf8 = vmem8[i] >> 4; + *buf8 |= vmem8[i + 1] & 0xF0; + buf8++; + i += 2; + } + } + break; + default: + /* Must be even because pages are two lines */ + y_start &= 0xFE; + i = y_start * line_length; + for (y = y_start; y <= y_end; y += 2) { + for (x = 0; x < line_length; x++) { + *buf8 = vmem8[i] >> 4; + *buf8 |= vmem8[i + line_length] & 0xF0; + buf8++; + i++; + } + i += line_length; + } + break; + } + gpiod_set_value(par->gpio.dc, 1); + + /* Write data */ + ret = par->fbtftops.write(par, par->txbuf.buf, len / 2); + break; + case 9: + switch (par->info->var.rotate) { + case 90: + case 270: + i = y_start * line_length; + for (y = y_start; y <= y_end; y++) { + for (x = 0; x < line_length; x += 2) { + *buf16 = 0x100; + *buf16 |= vmem8[i] >> 4; + *buf16 |= vmem8[i + 1] & 0xF0; + buf16++; + i += 2; + } + } + break; + default: + /* Must be even because pages are two lines */ + y_start &= 0xFE; + i = y_start * line_length; + for (y = y_start; y <= y_end; y += 2) { + for (x = 0; x < line_length; x++) { + *buf16 = 0x100; + *buf16 |= vmem8[i] >> 4; + *buf16 |= vmem8[i + line_length] & 0xF0; + buf16++; + i++; + } + i += line_length; + } + break; + } + + /* Write data */ + ret = par->fbtftops.write(par, par->txbuf.buf, len); + break; + default: + dev_err(par->info->device, "unsupported buswidth %d\n", + par->pdata->display.buswidth); + } + + if (ret < 0) + dev_err(par->info->device, "write failed and returned: %d\n", + ret); + + return ret; +} + +static struct fbtft_display display = { + .txbuflen = -1, + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .bpp = BPP, + .fps = FPS, + .fbtftops = { + .write_vmem = write_vmem, + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + .blank = blank, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "ultrachip,uc1611", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:uc1611"); +MODULE_ALIAS("platform:uc1611"); + +MODULE_DESCRIPTION("FB driver for the UC1611 LCD controller"); +MODULE_AUTHOR("Henri Chain"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_uc1701.c b/drivers/staging/fbtft/fb_uc1701.c new file mode 100644 index 000000000..e4ccc7386 --- /dev/null +++ b/drivers/staging/fbtft/fb_uc1701.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the UC1701 LCD Controller + * + * The display is monochrome and the video memory is RGB565. + * Any pixel value except 0 turns the pixel on. + * + * Copyright (C) 2014 Juergen Holzmann + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_uc1701" +#define WIDTH 102 +#define HEIGHT 64 +#define PAGES (HEIGHT / 8) + +/* 1: Display on/off */ +#define LCD_DISPLAY_ENABLE 0xAE +/* 2: display start line set */ +#define LCD_START_LINE 0x40 +/* 3: Page address set (lower 4 bits select one of the pages) */ +#define LCD_PAGE_ADDRESS 0xB0 +/* 4: column address */ +#define LCD_COL_ADDRESS 0x10 +/* 8: select orientation */ +#define LCD_BOTTOMVIEW 0xA0 +/* 9: inverted display */ +#define LCD_DISPLAY_INVERT 0xA6 +/* 10: show memory content or switch all pixels on */ +#define LCD_ALL_PIXEL 0xA4 +/* 11: lcd bias set */ +#define LCD_BIAS 0xA2 +/* 14: Reset Controller */ +#define LCD_RESET_CMD 0xE2 +/* 15: output mode select (turns display upside-down) */ +#define LCD_SCAN_DIR 0xC0 +/* 16: power control set */ +#define LCD_POWER_CONTROL 0x28 +/* 17: voltage regulator resistor ratio set */ +#define LCD_VOLTAGE 0x20 +/* 18: Volume mode set */ +#define LCD_VOLUME_MODE 0x81 +/* 22: NOP command */ +#define LCD_NO_OP 0xE3 +/* 25: advanced program control */ +#define LCD_ADV_PROG_CTRL 0xFA +/* 25: advanced program control2 */ +#define LCD_ADV_PROG_CTRL2 0x10 +#define LCD_TEMPCOMP_HIGH 0x80 +/* column offset for normal orientation */ +#define SHIFT_ADDR_NORMAL 0 +/* column offset for bottom view orientation */ +#define SHIFT_ADDR_TOPVIEW 30 + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* softreset of LCD */ + write_reg(par, LCD_RESET_CMD); + mdelay(10); + + /* set startpoint */ + write_reg(par, LCD_START_LINE); + + /* select orientation BOTTOMVIEW */ + write_reg(par, LCD_BOTTOMVIEW | 1); + + /* output mode select (turns display upside-down) */ + write_reg(par, LCD_SCAN_DIR | 0x00); + + /* Normal Pixel mode */ + write_reg(par, LCD_ALL_PIXEL | 0); + + /* positive display */ + write_reg(par, LCD_DISPLAY_INVERT | 0); + + /* bias 1/9 */ + write_reg(par, LCD_BIAS | 0); + + /* power control mode: all features on */ + write_reg(par, LCD_POWER_CONTROL | 0x07); + + /* set voltage regulator R/R */ + write_reg(par, LCD_VOLTAGE | 0x07); + + /* volume mode set */ + write_reg(par, LCD_VOLUME_MODE); + write_reg(par, 0x09); + write_reg(par, LCD_NO_OP); + + /* advanced program control */ + write_reg(par, LCD_ADV_PROG_CTRL); + write_reg(par, LCD_ADV_PROG_CTRL2 | LCD_TEMPCOMP_HIGH); + + /* enable display */ + write_reg(par, LCD_DISPLAY_ENABLE | 1); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + /* goto address */ + write_reg(par, LCD_PAGE_ADDRESS); + write_reg(par, 0x00); + write_reg(par, LCD_COL_ADDRESS); +} + +static int write_vmem(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16 = (u16 *)par->info->screen_buffer; + u8 *buf; + int x, y, i; + int ret = 0; + + for (y = 0; y < PAGES; y++) { + buf = par->txbuf.buf; + for (x = 0; x < WIDTH; x++) { + *buf = 0x00; + for (i = 0; i < 8; i++) + *buf |= (vmem16[((y * 8 * WIDTH) + + (i * WIDTH)) + x] ? + 1 : 0) << i; + buf++; + } + + write_reg(par, LCD_PAGE_ADDRESS | (u8)y); + write_reg(par, 0x00); + write_reg(par, LCD_COL_ADDRESS); + gpiod_set_value(par->gpio.dc, 1); + ret = par->fbtftops.write(par, par->txbuf.buf, WIDTH); + gpiod_set_value(par->gpio.dc, 0); + } + + if (ret < 0) + dev_err(par->info->device, "write failed and returned: %d\n", + ret); + + return ret; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .write_vmem = write_vmem, + }, + .backlight = 1, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "UltraChip,uc1701", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("spi:uc1701"); + +MODULE_DESCRIPTION("FB driver for the UC1701 LCD Controller"); +MODULE_AUTHOR("Juergen Holzmann"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fb_upd161704.c b/drivers/staging/fbtft/fb_upd161704.c new file mode 100644 index 000000000..c680160d6 --- /dev/null +++ b/drivers/staging/fbtft/fb_upd161704.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * FB driver for the uPD161704 LCD Controller + * + * Copyright (C) 2014 Seong-Woo Kim + * + * Based on fb_ili9325.c by Noralf Tronnes + * Based on ili9325.c by Jeroen Domburg + * Init code from UTFT library by Henning Karlsen + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_upd161704" +#define WIDTH 240 +#define HEIGHT 320 +#define BPP 16 + +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + /* Initialization sequence from Lib_UTFT */ + + /* register reset */ + write_reg(par, 0x0003, 0x0001); /* Soft reset */ + + /* oscillator start */ + write_reg(par, 0x003A, 0x0001); /*Oscillator 0: stop, 1: operation */ + udelay(100); + + /* y-setting */ + write_reg(par, 0x0024, 0x007B); /* amplitude setting */ + udelay(10); + write_reg(par, 0x0025, 0x003B); /* amplitude setting */ + write_reg(par, 0x0026, 0x0034); /* amplitude setting */ + udelay(10); + write_reg(par, 0x0027, 0x0004); /* amplitude setting */ + write_reg(par, 0x0052, 0x0025); /* circuit setting 1 */ + udelay(10); + write_reg(par, 0x0053, 0x0033); /* circuit setting 2 */ + write_reg(par, 0x0061, 0x001C); /* adjustment V10 positive polarity */ + udelay(10); + write_reg(par, 0x0062, 0x002C); /* adjustment V9 negative polarity */ + write_reg(par, 0x0063, 0x0022); /* adjustment V34 positive polarity */ + udelay(10); + write_reg(par, 0x0064, 0x0027); /* adjustment V31 negative polarity */ + udelay(10); + write_reg(par, 0x0065, 0x0014); /* adjustment V61 negative polarity */ + udelay(10); + write_reg(par, 0x0066, 0x0010); /* adjustment V61 negative polarity */ + + /* Basical clock for 1 line (BASECOUNT[7:0]) number specified */ + write_reg(par, 0x002E, 0x002D); + + /* Power supply setting */ + write_reg(par, 0x0019, 0x0000); /* DC/DC output setting */ + udelay(200); + write_reg(par, 0x001A, 0x1000); /* DC/DC frequency setting */ + write_reg(par, 0x001B, 0x0023); /* DC/DC rising setting */ + write_reg(par, 0x001C, 0x0C01); /* Regulator voltage setting */ + write_reg(par, 0x001D, 0x0000); /* Regulator current setting */ + write_reg(par, 0x001E, 0x0009); /* VCOM output setting */ + write_reg(par, 0x001F, 0x0035); /* VCOM amplitude setting */ + write_reg(par, 0x0020, 0x0015); /* VCOMM cencter setting */ + write_reg(par, 0x0018, 0x1E7B); /* DC/DC operation setting */ + + /* windows setting */ + write_reg(par, 0x0008, 0x0000); /* Minimum X address */ + write_reg(par, 0x0009, 0x00EF); /* Maximum X address */ + write_reg(par, 0x000a, 0x0000); /* Minimum Y address */ + write_reg(par, 0x000b, 0x013F); /* Maximum Y address */ + + /* LCD display area setting */ + write_reg(par, 0x0029, 0x0000); /* [LCDSIZE] X MIN. size set */ + write_reg(par, 0x002A, 0x0000); /* [LCDSIZE] Y MIN. size set */ + write_reg(par, 0x002B, 0x00EF); /* [LCDSIZE] X MAX. size set */ + write_reg(par, 0x002C, 0x013F); /* [LCDSIZE] Y MAX. size set */ + + /* Gate scan setting */ + write_reg(par, 0x0032, 0x0002); + + /* n line inversion line number */ + write_reg(par, 0x0033, 0x0000); + + /* Line inversion/frame inversion/interlace setting */ + write_reg(par, 0x0037, 0x0000); + + /* Gate scan operation setting register */ + write_reg(par, 0x003B, 0x0001); + + /* Color mode */ + /*GS = 0: 260-k color (64 gray scale), GS = 1: 8 color (2 gray scale) */ + write_reg(par, 0x0004, 0x0000); + + /* RAM control register */ + write_reg(par, 0x0005, 0x0000); /*Window access 00:Normal, 10:Window */ + + /* Display setting register 2 */ + write_reg(par, 0x0001, 0x0000); + + /* display setting */ + write_reg(par, 0x0000, 0x0000); /* display on */ + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + switch (par->info->var.rotate) { + /* R20h = Horizontal GRAM Start Address */ + /* R21h = Vertical GRAM Start Address */ + case 0: + write_reg(par, 0x0006, xs); + write_reg(par, 0x0007, ys); + break; + case 180: + write_reg(par, 0x0006, WIDTH - 1 - xs); + write_reg(par, 0x0007, HEIGHT - 1 - ys); + break; + case 270: + write_reg(par, 0x0006, WIDTH - 1 - ys); + write_reg(par, 0x0007, xs); + break; + case 90: + write_reg(par, 0x0006, ys); + write_reg(par, 0x0007, HEIGHT - 1 - xs); + break; + } + + write_reg(par, 0x0e); /* Write Data to GRAM */ +} + +static int set_var(struct fbtft_par *par) +{ + switch (par->info->var.rotate) { + /* AM: GRAM update direction */ + case 0: + write_reg(par, 0x01, 0x0000); + write_reg(par, 0x05, 0x0000); + break; + case 180: + write_reg(par, 0x01, 0x00C0); + write_reg(par, 0x05, 0x0000); + break; + case 270: + write_reg(par, 0x01, 0x0080); + write_reg(par, 0x05, 0x0001); + break; + case 90: + write_reg(par, 0x01, 0x0040); + write_reg(par, 0x05, 0x0001); + break; + } + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 16, + .width = WIDTH, + .height = HEIGHT, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "nec,upd161704", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:upd161704"); +MODULE_ALIAS("platform:upd161704"); + +MODULE_DESCRIPTION("FB driver for the uPD161704 LCD Controller"); +MODULE_AUTHOR("Seong-Woo Kim"); +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fbtft-bus.c b/drivers/staging/fbtft/fbtft-bus.c new file mode 100644 index 000000000..3d422bc11 --- /dev/null +++ b/drivers/staging/fbtft/fbtft-bus.c @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h> +#include "fbtft.h" + +/***************************************************************************** + * + * void (*write_reg)(struct fbtft_par *par, int len, ...); + * + *****************************************************************************/ + +#define define_fbtft_write_reg(func, buffer_type, data_type, modifier) \ +void func(struct fbtft_par *par, int len, ...) \ +{ \ + va_list args; \ + int i, ret; \ + int offset = 0; \ + buffer_type *buf = (buffer_type *)par->buf; \ + \ + if (unlikely(par->debug & DEBUG_WRITE_REGISTER)) { \ + va_start(args, len); \ + for (i = 0; i < len; i++) { \ + buf[i] = modifier((data_type)va_arg(args, \ + unsigned int)); \ + } \ + va_end(args); \ + fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par, \ + par->info->device, buffer_type, buf, len, \ + "%s: ", __func__); \ + } \ + \ + va_start(args, len); \ + \ + if (par->startbyte) { \ + *(u8 *)par->buf = par->startbyte; \ + buf = (buffer_type *)(par->buf + 1); \ + offset = 1; \ + } \ + \ + *buf = modifier((data_type)va_arg(args, unsigned int)); \ + ret = fbtft_write_buf_dc(par, par->buf, sizeof(data_type) + offset, \ + 0); \ + if (ret < 0) \ + goto out; \ + len--; \ + \ + if (par->startbyte) \ + *(u8 *)par->buf = par->startbyte | 0x2; \ + \ + if (len) { \ + i = len; \ + while (i--) \ + *buf++ = modifier((data_type)va_arg(args, \ + unsigned int)); \ + fbtft_write_buf_dc(par, par->buf, \ + len * (sizeof(data_type) + offset), 1); \ + } \ +out: \ + va_end(args); \ +} \ +EXPORT_SYMBOL(func); + +define_fbtft_write_reg(fbtft_write_reg8_bus8, u8, u8, ) +define_fbtft_write_reg(fbtft_write_reg16_bus8, __be16, u16, cpu_to_be16) +define_fbtft_write_reg(fbtft_write_reg16_bus16, u16, u16, ) + +void fbtft_write_reg8_bus9(struct fbtft_par *par, int len, ...) +{ + va_list args; + int i, ret; + int pad = 0; + u16 *buf = (u16 *)par->buf; + + if (unlikely(par->debug & DEBUG_WRITE_REGISTER)) { + va_start(args, len); + for (i = 0; i < len; i++) + *(((u8 *)buf) + i) = (u8)va_arg(args, unsigned int); + va_end(args); + fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par, + par->info->device, u8, buf, len, "%s: ", + __func__); + } + if (len <= 0) + return; + + if (par->spi && (par->spi->bits_per_word == 8)) { + /* we're emulating 9-bit, pad start of buffer with no-ops + * (assuming here that zero is a no-op) + */ + pad = (len % 4) ? 4 - (len % 4) : 0; + for (i = 0; i < pad; i++) + *buf++ = 0x000; + } + + va_start(args, len); + *buf++ = (u8)va_arg(args, unsigned int); + i = len - 1; + while (i--) { + *buf = (u8)va_arg(args, unsigned int); + *buf++ |= 0x100; /* dc=1 */ + } + va_end(args); + ret = par->fbtftops.write(par, par->buf, (len + pad) * sizeof(u16)); + if (ret < 0) { + dev_err(par->info->device, + "write() failed and returned %d\n", ret); + return; + } +} +EXPORT_SYMBOL(fbtft_write_reg8_bus9); + +/***************************************************************************** + * + * int (*write_vmem)(struct fbtft_par *par); + * + *****************************************************************************/ + +/* 16 bit pixel over 8-bit databus */ +int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16; + __be16 *txbuf16 = par->txbuf.buf; + size_t remain; + size_t to_copy; + size_t tx_array_size; + int i; + int ret = 0; + size_t startbyte_size = 0; + + fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s(offset=%zu, len=%zu)\n", + __func__, offset, len); + + remain = len / 2; + vmem16 = (u16 *)(par->info->screen_buffer + offset); + + gpiod_set_value(par->gpio.dc, 1); + + /* non buffered write */ + if (!par->txbuf.buf) + return par->fbtftops.write(par, vmem16, len); + + /* buffered write */ + tx_array_size = par->txbuf.len / 2; + + if (par->startbyte) { + txbuf16 = par->txbuf.buf + 1; + tx_array_size -= 2; + *(u8 *)(par->txbuf.buf) = par->startbyte | 0x2; + startbyte_size = 1; + } + + while (remain) { + to_copy = min(tx_array_size, remain); + dev_dbg(par->info->device, "to_copy=%zu, remain=%zu\n", + to_copy, remain - to_copy); + + for (i = 0; i < to_copy; i++) + txbuf16[i] = cpu_to_be16(vmem16[i]); + + vmem16 = vmem16 + to_copy; + ret = par->fbtftops.write(par, par->txbuf.buf, + startbyte_size + to_copy * 2); + if (ret < 0) + return ret; + remain -= to_copy; + } + + return ret; +} +EXPORT_SYMBOL(fbtft_write_vmem16_bus8); + +/* 16 bit pixel over 9-bit SPI bus: dc + high byte, dc + low byte */ +int fbtft_write_vmem16_bus9(struct fbtft_par *par, size_t offset, size_t len) +{ + u8 *vmem8; + u16 *txbuf16 = par->txbuf.buf; + size_t remain; + size_t to_copy; + size_t tx_array_size; + int i; + int ret = 0; + + fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s(offset=%zu, len=%zu)\n", + __func__, offset, len); + + if (!par->txbuf.buf) { + dev_err(par->info->device, "%s: txbuf.buf is NULL\n", __func__); + return -1; + } + + remain = len; + vmem8 = par->info->screen_buffer + offset; + + tx_array_size = par->txbuf.len / 2; + + while (remain) { + to_copy = min(tx_array_size, remain); + dev_dbg(par->info->device, "to_copy=%zu, remain=%zu\n", + to_copy, remain - to_copy); + +#ifdef __LITTLE_ENDIAN + for (i = 0; i < to_copy; i += 2) { + txbuf16[i] = 0x0100 | vmem8[i + 1]; + txbuf16[i + 1] = 0x0100 | vmem8[i]; + } +#else + for (i = 0; i < to_copy; i++) + txbuf16[i] = 0x0100 | vmem8[i]; +#endif + vmem8 = vmem8 + to_copy; + ret = par->fbtftops.write(par, par->txbuf.buf, to_copy * 2); + if (ret < 0) + return ret; + remain -= to_copy; + } + + return ret; +} +EXPORT_SYMBOL(fbtft_write_vmem16_bus9); + +int fbtft_write_vmem8_bus8(struct fbtft_par *par, size_t offset, size_t len) +{ + dev_err(par->info->device, "%s: function not implemented\n", __func__); + return -1; +} +EXPORT_SYMBOL(fbtft_write_vmem8_bus8); + +/* 16 bit pixel over 16-bit databus */ +int fbtft_write_vmem16_bus16(struct fbtft_par *par, size_t offset, size_t len) +{ + u16 *vmem16; + + fbtft_par_dbg(DEBUG_WRITE_VMEM, par, "%s(offset=%zu, len=%zu)\n", + __func__, offset, len); + + vmem16 = (u16 *)(par->info->screen_buffer + offset); + + /* no need for buffered write with 16-bit bus */ + return fbtft_write_buf_dc(par, vmem16, len, 1); +} +EXPORT_SYMBOL(fbtft_write_vmem16_bus16); diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c new file mode 100644 index 000000000..afaba94d1 --- /dev/null +++ b/drivers/staging/fbtft/fbtft-core.c @@ -0,0 +1,1327 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2013 Noralf Tronnes + * + * This driver is inspired by: + * st7735fb.c, Copyright (C) 2011, Matt Porter + * broadsheetfb.c, Copyright (C) 2008, Jaya Kumar + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/fb.h> +#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/backlight.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/spinlock.h> + +#include <video/mipi_display.h> + +#include "fbtft.h" +#include "internal.h" + +static unsigned long debug; +module_param(debug, ulong, 0000); +MODULE_PARM_DESC(debug, "override device debug level"); + +int fbtft_write_buf_dc(struct fbtft_par *par, void *buf, size_t len, int dc) +{ + int ret; + + gpiod_set_value(par->gpio.dc, dc); + + ret = par->fbtftops.write(par, buf, len); + if (ret < 0) + dev_err(par->info->device, + "write() failed and returned %d\n", ret); + return ret; +} +EXPORT_SYMBOL(fbtft_write_buf_dc); + +void fbtft_dbg_hex(const struct device *dev, int groupsize, + const void *buf, size_t len, const char *fmt, ...) +{ + va_list args; + static char textbuf[512]; + char *text = textbuf; + size_t text_len; + + va_start(args, fmt); + text_len = vscnprintf(text, sizeof(textbuf), fmt, args); + va_end(args); + + hex_dump_to_buffer(buf, len, 32, groupsize, text + text_len, + 512 - text_len, false); + + if (len > 32) + dev_info(dev, "%s ...\n", text); + else + dev_info(dev, "%s\n", text); +} +EXPORT_SYMBOL(fbtft_dbg_hex); + +static int fbtft_request_one_gpio(struct fbtft_par *par, + const char *name, int index, + struct gpio_desc **gpiop) +{ + struct device *dev = par->info->device; + + *gpiop = devm_gpiod_get_index_optional(dev, name, index, + GPIOD_OUT_LOW); + if (IS_ERR(*gpiop)) + return dev_err_probe(dev, PTR_ERR(*gpiop), "Failed to request %s GPIO\n", name); + + fbtft_par_dbg(DEBUG_REQUEST_GPIOS, par, "%s: '%s' GPIO\n", + __func__, name); + + return 0; +} + +static int fbtft_request_gpios(struct fbtft_par *par) +{ + int i; + int ret; + + ret = fbtft_request_one_gpio(par, "reset", 0, &par->gpio.reset); + if (ret) + return ret; + ret = fbtft_request_one_gpio(par, "dc", 0, &par->gpio.dc); + if (ret) + return ret; + ret = fbtft_request_one_gpio(par, "rd", 0, &par->gpio.rd); + if (ret) + return ret; + ret = fbtft_request_one_gpio(par, "wr", 0, &par->gpio.wr); + if (ret) + return ret; + ret = fbtft_request_one_gpio(par, "cs", 0, &par->gpio.cs); + if (ret) + return ret; + ret = fbtft_request_one_gpio(par, "latch", 0, &par->gpio.latch); + if (ret) + return ret; + for (i = 0; i < 16; i++) { + ret = fbtft_request_one_gpio(par, "db", i, + &par->gpio.db[i]); + if (ret) + return ret; + ret = fbtft_request_one_gpio(par, "led", i, + &par->gpio.led[i]); + if (ret) + return ret; + ret = fbtft_request_one_gpio(par, "aux", i, + &par->gpio.aux[i]); + if (ret) + return ret; + } + + return 0; +} + +static int fbtft_backlight_update_status(struct backlight_device *bd) +{ + struct fbtft_par *par = bl_get_data(bd); + bool polarity = par->polarity; + + fbtft_par_dbg(DEBUG_BACKLIGHT, par, + "%s: polarity=%d, power=%d, fb_blank=%d\n", + __func__, polarity, bd->props.power, bd->props.fb_blank); + + if (!backlight_is_blank(bd)) + gpiod_set_value(par->gpio.led[0], polarity); + else + gpiod_set_value(par->gpio.led[0], !polarity); + + return 0; +} + +static int fbtft_backlight_get_brightness(struct backlight_device *bd) +{ + return bd->props.brightness; +} + +void fbtft_unregister_backlight(struct fbtft_par *par) +{ + if (par->info->bl_dev) { + par->info->bl_dev->props.power = FB_BLANK_POWERDOWN; + backlight_update_status(par->info->bl_dev); + backlight_device_unregister(par->info->bl_dev); + par->info->bl_dev = NULL; + } +} +EXPORT_SYMBOL(fbtft_unregister_backlight); + +static const struct backlight_ops fbtft_bl_ops = { + .get_brightness = fbtft_backlight_get_brightness, + .update_status = fbtft_backlight_update_status, +}; + +void fbtft_register_backlight(struct fbtft_par *par) +{ + struct backlight_device *bd; + struct backlight_properties bl_props = { 0, }; + + if (!par->gpio.led[0]) { + fbtft_par_dbg(DEBUG_BACKLIGHT, par, + "%s(): led pin not set, exiting.\n", __func__); + return; + } + + bl_props.type = BACKLIGHT_RAW; + /* Assume backlight is off, get polarity from current state of pin */ + bl_props.power = FB_BLANK_POWERDOWN; + if (!gpiod_get_value(par->gpio.led[0])) + par->polarity = true; + + bd = backlight_device_register(dev_driver_string(par->info->device), + par->info->device, par, + &fbtft_bl_ops, &bl_props); + if (IS_ERR(bd)) { + dev_err(par->info->device, + "cannot register backlight device (%ld)\n", + PTR_ERR(bd)); + return; + } + par->info->bl_dev = bd; + + if (!par->fbtftops.unregister_backlight) + par->fbtftops.unregister_backlight = fbtft_unregister_backlight; +} +EXPORT_SYMBOL(fbtft_register_backlight); + +static void fbtft_set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, + int ye) +{ + write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, + (xs >> 8) & 0xFF, xs & 0xFF, (xe >> 8) & 0xFF, xe & 0xFF); + + write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, + (ys >> 8) & 0xFF, ys & 0xFF, (ye >> 8) & 0xFF, ye & 0xFF); + + write_reg(par, MIPI_DCS_WRITE_MEMORY_START); +} + +static void fbtft_reset(struct fbtft_par *par) +{ + if (!par->gpio.reset) + return; + + fbtft_par_dbg(DEBUG_RESET, par, "%s()\n", __func__); + + gpiod_set_value_cansleep(par->gpio.reset, 1); + usleep_range(20, 40); + gpiod_set_value_cansleep(par->gpio.reset, 0); + msleep(120); + + gpiod_set_value_cansleep(par->gpio.cs, 1); /* Activate chip */ +} + +static void fbtft_update_display(struct fbtft_par *par, unsigned int start_line, + unsigned int end_line) +{ + size_t offset, len; + ktime_t ts_start, ts_end; + long fps, throughput; + bool timeit = false; + int ret = 0; + + if (unlikely(par->debug & (DEBUG_TIME_FIRST_UPDATE | + DEBUG_TIME_EACH_UPDATE))) { + if ((par->debug & DEBUG_TIME_EACH_UPDATE) || + ((par->debug & DEBUG_TIME_FIRST_UPDATE) && + !par->first_update_done)) { + ts_start = ktime_get(); + timeit = true; + } + } + + /* Sanity checks */ + if (start_line > end_line) { + dev_warn(par->info->device, + "%s: start_line=%u is larger than end_line=%u. Shouldn't happen, will do full display update\n", + __func__, start_line, end_line); + start_line = 0; + end_line = par->info->var.yres - 1; + } + if (start_line > par->info->var.yres - 1 || + end_line > par->info->var.yres - 1) { + dev_warn(par->info->device, + "%s: start_line=%u or end_line=%u is larger than max=%d. Shouldn't happen, will do full display update\n", + __func__, start_line, + end_line, par->info->var.yres - 1); + start_line = 0; + end_line = par->info->var.yres - 1; + } + + fbtft_par_dbg(DEBUG_UPDATE_DISPLAY, par, "%s(start_line=%u, end_line=%u)\n", + __func__, start_line, end_line); + + if (par->fbtftops.set_addr_win) + par->fbtftops.set_addr_win(par, 0, start_line, + par->info->var.xres - 1, end_line); + + offset = start_line * par->info->fix.line_length; + len = (end_line - start_line + 1) * par->info->fix.line_length; + ret = par->fbtftops.write_vmem(par, offset, len); + if (ret < 0) + dev_err(par->info->device, + "%s: write_vmem failed to update display buffer\n", + __func__); + + if (unlikely(timeit)) { + ts_end = ktime_get(); + if (!ktime_to_ns(par->update_time)) + par->update_time = ts_start; + + fps = ktime_us_delta(ts_start, par->update_time); + par->update_time = ts_start; + fps = fps ? 1000000 / fps : 0; + + throughput = ktime_us_delta(ts_end, ts_start); + throughput = throughput ? (len * 1000) / throughput : 0; + throughput = throughput * 1000 / 1024; + + dev_info(par->info->device, + "Display update: %ld kB/s, fps=%ld\n", + throughput, fps); + par->first_update_done = true; + } +} + +static void fbtft_mkdirty(struct fb_info *info, int y, int height) +{ + struct fbtft_par *par = info->par; + struct fb_deferred_io *fbdefio = info->fbdefio; + + /* special case, needed ? */ + if (y == -1) { + y = 0; + height = info->var.yres; + } + + /* Mark display lines/area as dirty */ + spin_lock(&par->dirty_lock); + if (y < par->dirty_lines_start) + par->dirty_lines_start = y; + if (y + height - 1 > par->dirty_lines_end) + par->dirty_lines_end = y + height - 1; + spin_unlock(&par->dirty_lock); + + /* Schedule deferred_io to update display (no-op if already on queue)*/ + schedule_delayed_work(&info->deferred_work, fbdefio->delay); +} + +static void fbtft_deferred_io(struct fb_info *info, struct list_head *pagereflist) +{ + struct fbtft_par *par = info->par; + unsigned int dirty_lines_start, dirty_lines_end; + struct fb_deferred_io_pageref *pageref; + unsigned int y_low = 0, y_high = 0; + int count = 0; + + spin_lock(&par->dirty_lock); + dirty_lines_start = par->dirty_lines_start; + dirty_lines_end = par->dirty_lines_end; + /* set display line markers as clean */ + par->dirty_lines_start = par->info->var.yres - 1; + par->dirty_lines_end = 0; + spin_unlock(&par->dirty_lock); + + /* Mark display lines as dirty */ + list_for_each_entry(pageref, pagereflist, list) { + count++; + y_low = pageref->offset / info->fix.line_length; + y_high = (pageref->offset + PAGE_SIZE - 1) / info->fix.line_length; + dev_dbg(info->device, + "page->index=%lu y_low=%d y_high=%d\n", + pageref->page->index, y_low, y_high); + if (y_high > info->var.yres - 1) + y_high = info->var.yres - 1; + if (y_low < dirty_lines_start) + dirty_lines_start = y_low; + if (y_high > dirty_lines_end) + dirty_lines_end = y_high; + } + + par->fbtftops.update_display(info->par, + dirty_lines_start, dirty_lines_end); +} + +static void fbtft_fb_fillrect(struct fb_info *info, + const struct fb_fillrect *rect) +{ + struct fbtft_par *par = info->par; + + dev_dbg(info->dev, + "%s: dx=%d, dy=%d, width=%d, height=%d\n", + __func__, rect->dx, rect->dy, rect->width, rect->height); + sys_fillrect(info, rect); + + par->fbtftops.mkdirty(info, rect->dy, rect->height); +} + +static void fbtft_fb_copyarea(struct fb_info *info, + const struct fb_copyarea *area) +{ + struct fbtft_par *par = info->par; + + dev_dbg(info->dev, + "%s: dx=%d, dy=%d, width=%d, height=%d\n", + __func__, area->dx, area->dy, area->width, area->height); + sys_copyarea(info, area); + + par->fbtftops.mkdirty(info, area->dy, area->height); +} + +static void fbtft_fb_imageblit(struct fb_info *info, + const struct fb_image *image) +{ + struct fbtft_par *par = info->par; + + dev_dbg(info->dev, + "%s: dx=%d, dy=%d, width=%d, height=%d\n", + __func__, image->dx, image->dy, image->width, image->height); + sys_imageblit(info, image); + + par->fbtftops.mkdirty(info, image->dy, image->height); +} + +static ssize_t fbtft_fb_write(struct fb_info *info, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct fbtft_par *par = info->par; + ssize_t res; + + dev_dbg(info->dev, + "%s: count=%zd, ppos=%llu\n", __func__, count, *ppos); + res = fb_sys_write(info, buf, count, ppos); + + /* TODO: only mark changed area update all for now */ + par->fbtftops.mkdirty(info, -1, 0); + + return res; +} + +/* from pxafb.c */ +static unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int fbtft_fb_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int transp, struct fb_info *info) +{ + unsigned int val; + int ret = 1; + + dev_dbg(info->dev, + "%s(regno=%u, red=0x%X, green=0x%X, blue=0x%X, trans=0x%X)\n", + __func__, regno, red, green, blue, transp); + + switch (info->fix.visual) { + case FB_VISUAL_TRUECOLOR: + if (regno < 16) { + u32 *pal = info->pseudo_palette; + + val = chan_to_field(red, &info->var.red); + val |= chan_to_field(green, &info->var.green); + val |= chan_to_field(blue, &info->var.blue); + + pal[regno] = val; + ret = 0; + } + break; + } + return ret; +} + +static int fbtft_fb_blank(int blank, struct fb_info *info) +{ + struct fbtft_par *par = info->par; + int ret = -EINVAL; + + dev_dbg(info->dev, "%s(blank=%d)\n", + __func__, blank); + + if (!par->fbtftops.blank) + return ret; + + switch (blank) { + case FB_BLANK_POWERDOWN: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_NORMAL: + ret = par->fbtftops.blank(par, true); + break; + case FB_BLANK_UNBLANK: + ret = par->fbtftops.blank(par, false); + break; + } + return ret; +} + +static void fbtft_merge_fbtftops(struct fbtft_ops *dst, struct fbtft_ops *src) +{ + if (src->write) + dst->write = src->write; + if (src->read) + dst->read = src->read; + if (src->write_vmem) + dst->write_vmem = src->write_vmem; + if (src->write_register) + dst->write_register = src->write_register; + if (src->set_addr_win) + dst->set_addr_win = src->set_addr_win; + if (src->reset) + dst->reset = src->reset; + if (src->mkdirty) + dst->mkdirty = src->mkdirty; + if (src->update_display) + dst->update_display = src->update_display; + if (src->init_display) + dst->init_display = src->init_display; + if (src->blank) + dst->blank = src->blank; + if (src->request_gpios_match) + dst->request_gpios_match = src->request_gpios_match; + if (src->request_gpios) + dst->request_gpios = src->request_gpios; + if (src->verify_gpios) + dst->verify_gpios = src->verify_gpios; + if (src->register_backlight) + dst->register_backlight = src->register_backlight; + if (src->unregister_backlight) + dst->unregister_backlight = src->unregister_backlight; + if (src->set_var) + dst->set_var = src->set_var; + if (src->set_gamma) + dst->set_gamma = src->set_gamma; +} + +/** + * fbtft_framebuffer_alloc - creates a new frame buffer info structure + * + * @display: pointer to structure describing the display + * @dev: pointer to the device for this fb, this can be NULL + * @pdata: platform data for the display in use + * + * Creates a new frame buffer info structure. + * + * Also creates and populates the following structures: + * info->fbops + * info->fbdefio + * info->pseudo_palette + * par->fbtftops + * par->txbuf + * + * Returns the new structure, or NULL if an error occurred. + * + */ +struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display, + struct device *dev, + struct fbtft_platform_data *pdata) +{ + struct fb_info *info; + struct fbtft_par *par; + struct fb_ops *fbops = NULL; + struct fb_deferred_io *fbdefio = NULL; + u8 *vmem = NULL; + void *txbuf = NULL; + void *buf = NULL; + unsigned int width; + unsigned int height; + int txbuflen = display->txbuflen; + unsigned int bpp = display->bpp; + unsigned int fps = display->fps; + int vmem_size; + const s16 *init_sequence = display->init_sequence; + char *gamma = display->gamma; + u32 *gamma_curves = NULL; + + /* sanity check */ + if (display->gamma_num * display->gamma_len > + FBTFT_GAMMA_MAX_VALUES_TOTAL) { + dev_err(dev, "FBTFT_GAMMA_MAX_VALUES_TOTAL=%d is exceeded\n", + FBTFT_GAMMA_MAX_VALUES_TOTAL); + return NULL; + } + + /* defaults */ + if (!fps) + fps = 20; + if (!bpp) + bpp = 16; + + if (!pdata) { + dev_err(dev, "platform data is missing\n"); + return NULL; + } + + /* override driver values? */ + if (pdata->fps) + fps = pdata->fps; + if (pdata->txbuflen) + txbuflen = pdata->txbuflen; + if (pdata->display.init_sequence) + init_sequence = pdata->display.init_sequence; + if (pdata->gamma) + gamma = pdata->gamma; + if (pdata->display.debug) + display->debug = pdata->display.debug; + if (pdata->display.backlight) + display->backlight = pdata->display.backlight; + if (pdata->display.width) + display->width = pdata->display.width; + if (pdata->display.height) + display->height = pdata->display.height; + if (pdata->display.buswidth) + display->buswidth = pdata->display.buswidth; + if (pdata->display.regwidth) + display->regwidth = pdata->display.regwidth; + + display->debug |= debug; + fbtft_expand_debug_value(&display->debug); + + switch (pdata->rotate) { + case 90: + case 270: + width = display->height; + height = display->width; + break; + default: + width = display->width; + height = display->height; + } + + vmem_size = display->width * display->height * bpp / 8; + vmem = vzalloc(vmem_size); + if (!vmem) + goto alloc_fail; + + fbops = devm_kzalloc(dev, sizeof(struct fb_ops), GFP_KERNEL); + if (!fbops) + goto alloc_fail; + + fbdefio = devm_kzalloc(dev, sizeof(struct fb_deferred_io), GFP_KERNEL); + if (!fbdefio) + goto alloc_fail; + + buf = devm_kzalloc(dev, 128, GFP_KERNEL); + if (!buf) + goto alloc_fail; + + if (display->gamma_num && display->gamma_len) { + gamma_curves = devm_kcalloc(dev, + display->gamma_num * + display->gamma_len, + sizeof(gamma_curves[0]), + GFP_KERNEL); + if (!gamma_curves) + goto alloc_fail; + } + + info = framebuffer_alloc(sizeof(struct fbtft_par), dev); + if (!info) + goto alloc_fail; + + info->screen_buffer = vmem; + info->fbops = fbops; + info->fbdefio = fbdefio; + + fbops->owner = dev->driver->owner; + fbops->fb_read = fb_sys_read; + fbops->fb_write = fbtft_fb_write; + fbops->fb_fillrect = fbtft_fb_fillrect; + fbops->fb_copyarea = fbtft_fb_copyarea; + fbops->fb_imageblit = fbtft_fb_imageblit; + fbops->fb_setcolreg = fbtft_fb_setcolreg; + fbops->fb_blank = fbtft_fb_blank; + fbops->fb_mmap = fb_deferred_io_mmap; + + fbdefio->delay = HZ / fps; + fbdefio->sort_pagereflist = true; + fbdefio->deferred_io = fbtft_deferred_io; + + snprintf(info->fix.id, sizeof(info->fix.id), "%s", dev->driver->name); + info->fix.type = FB_TYPE_PACKED_PIXELS; + info->fix.visual = FB_VISUAL_TRUECOLOR; + info->fix.xpanstep = 0; + info->fix.ypanstep = 0; + info->fix.ywrapstep = 0; + info->fix.line_length = width * bpp / 8; + info->fix.accel = FB_ACCEL_NONE; + info->fix.smem_len = vmem_size; + fb_deferred_io_init(info); + + info->var.rotate = pdata->rotate; + info->var.xres = width; + info->var.yres = height; + info->var.xres_virtual = info->var.xres; + info->var.yres_virtual = info->var.yres; + info->var.bits_per_pixel = bpp; + info->var.nonstd = 1; + + /* RGB565 */ + info->var.red.offset = 11; + info->var.red.length = 5; + info->var.green.offset = 5; + info->var.green.length = 6; + info->var.blue.offset = 0; + info->var.blue.length = 5; + info->var.transp.offset = 0; + info->var.transp.length = 0; + + info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB; + + par = info->par; + par->info = info; + par->pdata = pdata; + par->debug = display->debug; + par->buf = buf; + spin_lock_init(&par->dirty_lock); + par->bgr = pdata->bgr; + par->startbyte = pdata->startbyte; + par->init_sequence = init_sequence; + par->gamma.curves = gamma_curves; + par->gamma.num_curves = display->gamma_num; + par->gamma.num_values = display->gamma_len; + mutex_init(&par->gamma.lock); + info->pseudo_palette = par->pseudo_palette; + + if (par->gamma.curves && gamma) { + if (fbtft_gamma_parse_str(par, par->gamma.curves, gamma, + strlen(gamma))) + goto release_framebuf; + } + + /* Transmit buffer */ + if (txbuflen == -1) + txbuflen = vmem_size + 2; /* add in case startbyte is used */ + if (txbuflen >= vmem_size + 2) + txbuflen = 0; + +#ifdef __LITTLE_ENDIAN + if ((!txbuflen) && (bpp > 8)) + txbuflen = PAGE_SIZE; /* need buffer for byteswapping */ +#endif + + if (txbuflen > 0) { + txbuf = devm_kzalloc(par->info->device, txbuflen, GFP_KERNEL); + if (!txbuf) + goto release_framebuf; + par->txbuf.buf = txbuf; + par->txbuf.len = txbuflen; + } + + /* default fbtft operations */ + par->fbtftops.write = fbtft_write_spi; + par->fbtftops.read = fbtft_read_spi; + par->fbtftops.write_vmem = fbtft_write_vmem16_bus8; + par->fbtftops.write_register = fbtft_write_reg8_bus8; + par->fbtftops.set_addr_win = fbtft_set_addr_win; + par->fbtftops.reset = fbtft_reset; + par->fbtftops.mkdirty = fbtft_mkdirty; + par->fbtftops.update_display = fbtft_update_display; + if (display->backlight) + par->fbtftops.register_backlight = fbtft_register_backlight; + + /* use driver provided functions */ + fbtft_merge_fbtftops(&par->fbtftops, &display->fbtftops); + + return info; + +release_framebuf: + framebuffer_release(info); + +alloc_fail: + vfree(vmem); + + return NULL; +} +EXPORT_SYMBOL(fbtft_framebuffer_alloc); + +/** + * fbtft_framebuffer_release - frees up all memory used by the framebuffer + * + * @info: frame buffer info structure + * + */ +void fbtft_framebuffer_release(struct fb_info *info) +{ + fb_deferred_io_cleanup(info); + vfree(info->screen_buffer); + framebuffer_release(info); +} +EXPORT_SYMBOL(fbtft_framebuffer_release); + +/** + * fbtft_register_framebuffer - registers a tft frame buffer device + * @fb_info: frame buffer info structure + * + * Sets SPI driverdata if needed + * Requests needed gpios. + * Initializes display + * Updates display. + * Registers a frame buffer device @fb_info. + * + * Returns negative errno on error, or zero for success. + * + */ +int fbtft_register_framebuffer(struct fb_info *fb_info) +{ + int ret; + char text1[50] = ""; + char text2[50] = ""; + struct fbtft_par *par = fb_info->par; + struct spi_device *spi = par->spi; + + /* sanity checks */ + if (!par->fbtftops.init_display) { + dev_err(fb_info->device, "missing fbtftops.init_display()\n"); + return -EINVAL; + } + + if (spi) + spi_set_drvdata(spi, fb_info); + if (par->pdev) + platform_set_drvdata(par->pdev, fb_info); + + ret = par->fbtftops.request_gpios(par); + if (ret < 0) + goto reg_fail; + + if (par->fbtftops.verify_gpios) { + ret = par->fbtftops.verify_gpios(par); + if (ret < 0) + goto reg_fail; + } + + ret = par->fbtftops.init_display(par); + if (ret < 0) + goto reg_fail; + if (par->fbtftops.set_var) { + ret = par->fbtftops.set_var(par); + if (ret < 0) + goto reg_fail; + } + + /* update the entire display */ + par->fbtftops.update_display(par, 0, par->info->var.yres - 1); + + if (par->fbtftops.set_gamma && par->gamma.curves) { + ret = par->fbtftops.set_gamma(par, par->gamma.curves); + if (ret) + goto reg_fail; + } + + if (par->fbtftops.register_backlight) + par->fbtftops.register_backlight(par); + + ret = register_framebuffer(fb_info); + if (ret < 0) + goto reg_fail; + + fbtft_sysfs_init(par); + + if (par->txbuf.buf && par->txbuf.len >= 1024) + sprintf(text1, ", %zu KiB buffer memory", par->txbuf.len >> 10); + if (spi) + sprintf(text2, ", spi%d.%d at %d MHz", spi->master->bus_num, + spi->chip_select, spi->max_speed_hz / 1000000); + dev_info(fb_info->dev, + "%s frame buffer, %dx%d, %d KiB video memory%s, fps=%lu%s\n", + fb_info->fix.id, fb_info->var.xres, fb_info->var.yres, + fb_info->fix.smem_len >> 10, text1, + HZ / fb_info->fbdefio->delay, text2); + + /* Turn on backlight if available */ + if (fb_info->bl_dev) { + fb_info->bl_dev->props.power = FB_BLANK_UNBLANK; + fb_info->bl_dev->ops->update_status(fb_info->bl_dev); + } + + return 0; + +reg_fail: + if (par->fbtftops.unregister_backlight) + par->fbtftops.unregister_backlight(par); + + return ret; +} +EXPORT_SYMBOL(fbtft_register_framebuffer); + +/** + * fbtft_unregister_framebuffer - releases a tft frame buffer device + * @fb_info: frame buffer info structure + * + * Frees SPI driverdata if needed + * Frees gpios. + * Unregisters frame buffer device. + * + */ +int fbtft_unregister_framebuffer(struct fb_info *fb_info) +{ + struct fbtft_par *par = fb_info->par; + + if (par->fbtftops.unregister_backlight) + par->fbtftops.unregister_backlight(par); + fbtft_sysfs_exit(par); + unregister_framebuffer(fb_info); + + return 0; +} +EXPORT_SYMBOL(fbtft_unregister_framebuffer); + +/** + * fbtft_init_display_from_property() - Device Tree init_display() function + * @par: Driver data + * + * Return: 0 if successful, negative if error + */ +static int fbtft_init_display_from_property(struct fbtft_par *par) +{ + struct device *dev = par->info->device; + int buf[64], count, index, i, j, ret; + u32 *values; + u32 val; + + count = device_property_count_u32(dev, "init"); + if (count < 0) + return count; + if (count == 0) + return -EINVAL; + + values = kmalloc_array(count + 1, sizeof(*values), GFP_KERNEL); + if (!values) + return -ENOMEM; + + ret = device_property_read_u32_array(dev, "init", values, count); + if (ret) + goto out_free; + + par->fbtftops.reset(par); + + index = -1; + val = values[++index]; + + while (index < count) { + if (val & FBTFT_OF_INIT_CMD) { + val &= 0xFFFF; + i = 0; + while ((index < count) && !(val & 0xFFFF0000)) { + if (i > 63) { + dev_err(dev, + "%s: Maximum register values exceeded\n", + __func__); + ret = -EINVAL; + goto out_free; + } + buf[i++] = val; + val = values[++index]; + } + /* make debug message */ + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, + "init: write_register:\n"); + for (j = 0; j < i; j++) + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, + "buf[%d] = %02X\n", j, buf[j]); + + par->fbtftops.write_register(par, i, + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[10], buf[11], + buf[12], buf[13], buf[14], buf[15], + buf[16], buf[17], buf[18], buf[19], + buf[20], buf[21], buf[22], buf[23], + buf[24], buf[25], buf[26], buf[27], + buf[28], buf[29], buf[30], buf[31], + buf[32], buf[33], buf[34], buf[35], + buf[36], buf[37], buf[38], buf[39], + buf[40], buf[41], buf[42], buf[43], + buf[44], buf[45], buf[46], buf[47], + buf[48], buf[49], buf[50], buf[51], + buf[52], buf[53], buf[54], buf[55], + buf[56], buf[57], buf[58], buf[59], + buf[60], buf[61], buf[62], buf[63]); + } else if (val & FBTFT_OF_INIT_DELAY) { + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, + "init: msleep(%u)\n", val & 0xFFFF); + msleep(val & 0xFFFF); + val = values[++index]; + } else { + dev_err(dev, "illegal init value 0x%X\n", val); + ret = -EINVAL; + goto out_free; + } + } + +out_free: + kfree(values); + return ret; +} + +/** + * fbtft_init_display() - Generic init_display() function + * @par: Driver data + * + * Uses par->init_sequence to do the initialization + * + * Return: 0 if successful, negative if error + */ +int fbtft_init_display(struct fbtft_par *par) +{ + int buf[64]; + int i; + int j; + + /* sanity check */ + if (!par->init_sequence) { + dev_err(par->info->device, + "error: init_sequence is not set\n"); + return -EINVAL; + } + + /* make sure stop marker exists */ + for (i = 0; i < FBTFT_MAX_INIT_SEQUENCE; i++) { + if (par->init_sequence[i] == -3) + break; + } + + if (i == FBTFT_MAX_INIT_SEQUENCE) { + dev_err(par->info->device, + "missing stop marker at end of init sequence\n"); + return -EINVAL; + } + + par->fbtftops.reset(par); + + i = 0; + while (i < FBTFT_MAX_INIT_SEQUENCE) { + if (par->init_sequence[i] == -3) { + /* done */ + return 0; + } + if (par->init_sequence[i] >= 0) { + dev_err(par->info->device, + "missing delimiter at position %d\n", i); + return -EINVAL; + } + if (par->init_sequence[i + 1] < 0) { + dev_err(par->info->device, + "missing value after delimiter %d at position %d\n", + par->init_sequence[i], i); + return -EINVAL; + } + switch (par->init_sequence[i]) { + case -1: + i++; + + /* make debug message */ + for (j = 0; par->init_sequence[i + 1 + j] >= 0; j++) + ; + + fbtft_par_dbg_hex(DEBUG_INIT_DISPLAY, par, par->info->device, + s16, &par->init_sequence[i + 1], j, + "init: write(0x%02X)", par->init_sequence[i]); + + /* Write */ + j = 0; + while (par->init_sequence[i] >= 0) { + if (j > 63) { + dev_err(par->info->device, + "%s: Maximum register values exceeded\n", + __func__); + return -EINVAL; + } + buf[j++] = par->init_sequence[i++]; + } + par->fbtftops.write_register(par, j, + buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[10], buf[11], + buf[12], buf[13], buf[14], buf[15], + buf[16], buf[17], buf[18], buf[19], + buf[20], buf[21], buf[22], buf[23], + buf[24], buf[25], buf[26], buf[27], + buf[28], buf[29], buf[30], buf[31], + buf[32], buf[33], buf[34], buf[35], + buf[36], buf[37], buf[38], buf[39], + buf[40], buf[41], buf[42], buf[43], + buf[44], buf[45], buf[46], buf[47], + buf[48], buf[49], buf[50], buf[51], + buf[52], buf[53], buf[54], buf[55], + buf[56], buf[57], buf[58], buf[59], + buf[60], buf[61], buf[62], buf[63]); + break; + case -2: + i++; + fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, + "init: mdelay(%d)\n", + par->init_sequence[i]); + mdelay(par->init_sequence[i++]); + break; + default: + dev_err(par->info->device, + "unknown delimiter %d at position %d\n", + par->init_sequence[i], i); + return -EINVAL; + } + } + + dev_err(par->info->device, + "%s: something is wrong. Shouldn't get here.\n", __func__); + return -EINVAL; +} +EXPORT_SYMBOL(fbtft_init_display); + +/** + * fbtft_verify_gpios() - Generic verify_gpios() function + * @par: Driver data + * + * Uses @spi, @pdev and @buswidth to determine which GPIOs is needed + * + * Return: 0 if successful, negative if error + */ +static int fbtft_verify_gpios(struct fbtft_par *par) +{ + struct fbtft_platform_data *pdata = par->pdata; + int i; + + fbtft_par_dbg(DEBUG_VERIFY_GPIOS, par, "%s()\n", __func__); + + if (pdata->display.buswidth != 9 && par->startbyte == 0 && + !par->gpio.dc) { + dev_err(par->info->device, + "Missing info about 'dc' gpio. Aborting.\n"); + return -EINVAL; + } + + if (!par->pdev) + return 0; + + if (!par->gpio.wr) { + dev_err(par->info->device, "Missing 'wr' gpio. Aborting.\n"); + return -EINVAL; + } + for (i = 0; i < pdata->display.buswidth; i++) { + if (!par->gpio.db[i]) { + dev_err(par->info->device, + "Missing 'db%02d' gpio. Aborting.\n", i); + return -EINVAL; + } + } + + return 0; +} + +/* returns 0 if the property is not present */ +static u32 fbtft_property_value(struct device *dev, const char *propname) +{ + int ret; + u32 val = 0; + + ret = device_property_read_u32(dev, propname, &val); + if (ret == 0) + dev_info(dev, "%s: %s = %u\n", __func__, propname, val); + + return val; +} + +static struct fbtft_platform_data *fbtft_properties_read(struct device *dev) +{ + struct fbtft_platform_data *pdata; + + if (!dev_fwnode(dev)) { + dev_err(dev, "Missing platform data or properties\n"); + return ERR_PTR(-EINVAL); + } + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return ERR_PTR(-ENOMEM); + + pdata->display.width = fbtft_property_value(dev, "width"); + pdata->display.height = fbtft_property_value(dev, "height"); + pdata->display.regwidth = fbtft_property_value(dev, "regwidth"); + pdata->display.buswidth = fbtft_property_value(dev, "buswidth"); + pdata->display.backlight = fbtft_property_value(dev, "backlight"); + pdata->display.bpp = fbtft_property_value(dev, "bpp"); + pdata->display.debug = fbtft_property_value(dev, "debug"); + pdata->rotate = fbtft_property_value(dev, "rotate"); + pdata->bgr = device_property_read_bool(dev, "bgr"); + pdata->fps = fbtft_property_value(dev, "fps"); + pdata->txbuflen = fbtft_property_value(dev, "txbuflen"); + pdata->startbyte = fbtft_property_value(dev, "startbyte"); + device_property_read_string(dev, "gamma", (const char **)&pdata->gamma); + + if (device_property_present(dev, "led-gpios")) + pdata->display.backlight = 1; + if (device_property_present(dev, "init")) + pdata->display.fbtftops.init_display = + fbtft_init_display_from_property; + + pdata->display.fbtftops.request_gpios = fbtft_request_gpios; + + return pdata; +} + +/** + * fbtft_probe_common() - Generic device probe() helper function + * @display: Display properties + * @sdev: SPI device + * @pdev: Platform device + * + * Allocates, initializes and registers a framebuffer + * + * Either @sdev or @pdev should be NULL + * + * Return: 0 if successful, negative if error + */ +int fbtft_probe_common(struct fbtft_display *display, + struct spi_device *sdev, + struct platform_device *pdev) +{ + struct device *dev; + struct fb_info *info; + struct fbtft_par *par; + struct fbtft_platform_data *pdata; + int ret; + + if (sdev) + dev = &sdev->dev; + else + dev = &pdev->dev; + + if (unlikely(display->debug & DEBUG_DRIVER_INIT_FUNCTIONS)) + dev_info(dev, "%s()\n", __func__); + + pdata = dev->platform_data; + if (!pdata) { + pdata = fbtft_properties_read(dev); + if (IS_ERR(pdata)) + return PTR_ERR(pdata); + } + + info = fbtft_framebuffer_alloc(display, dev, pdata); + if (!info) + return -ENOMEM; + + par = info->par; + par->spi = sdev; + par->pdev = pdev; + + if (display->buswidth == 0) { + dev_err(dev, "buswidth is not set\n"); + return -EINVAL; + } + + /* write register functions */ + if (display->regwidth == 8 && display->buswidth == 8) + par->fbtftops.write_register = fbtft_write_reg8_bus8; + else if (display->regwidth == 8 && display->buswidth == 9 && par->spi) + par->fbtftops.write_register = fbtft_write_reg8_bus9; + else if (display->regwidth == 16 && display->buswidth == 8) + par->fbtftops.write_register = fbtft_write_reg16_bus8; + else if (display->regwidth == 16 && display->buswidth == 16) + par->fbtftops.write_register = fbtft_write_reg16_bus16; + else + dev_warn(dev, + "no default functions for regwidth=%d and buswidth=%d\n", + display->regwidth, display->buswidth); + + /* write_vmem() functions */ + if (display->buswidth == 8) + par->fbtftops.write_vmem = fbtft_write_vmem16_bus8; + else if (display->buswidth == 9) + par->fbtftops.write_vmem = fbtft_write_vmem16_bus9; + else if (display->buswidth == 16) + par->fbtftops.write_vmem = fbtft_write_vmem16_bus16; + + /* GPIO write() functions */ + if (par->pdev) { + if (display->buswidth == 8) + par->fbtftops.write = fbtft_write_gpio8_wr; + else if (display->buswidth == 16) + par->fbtftops.write = fbtft_write_gpio16_wr; + } + + /* 9-bit SPI setup */ + if (par->spi && display->buswidth == 9) { + if (par->spi->master->bits_per_word_mask & SPI_BPW_MASK(9)) { + par->spi->bits_per_word = 9; + } else { + dev_warn(&par->spi->dev, + "9-bit SPI not available, emulating using 8-bit.\n"); + /* allocate buffer with room for dc bits */ + par->extra = devm_kzalloc(par->info->device, + par->txbuf.len + + (par->txbuf.len / 8) + 8, + GFP_KERNEL); + if (!par->extra) { + ret = -ENOMEM; + goto out_release; + } + par->fbtftops.write = fbtft_write_spi_emulate_9; + } + } + + if (!par->fbtftops.verify_gpios) + par->fbtftops.verify_gpios = fbtft_verify_gpios; + + /* make sure we still use the driver provided functions */ + fbtft_merge_fbtftops(&par->fbtftops, &display->fbtftops); + + /* use init_sequence if provided */ + if (par->init_sequence) + par->fbtftops.init_display = fbtft_init_display; + + /* use platform_data provided functions above all */ + fbtft_merge_fbtftops(&par->fbtftops, &pdata->display.fbtftops); + + ret = fbtft_register_framebuffer(info); + if (ret < 0) + goto out_release; + + return 0; + +out_release: + fbtft_framebuffer_release(info); + + return ret; +} +EXPORT_SYMBOL(fbtft_probe_common); + +/** + * fbtft_remove_common() - Generic device remove() helper function + * @dev: Device + * @info: Framebuffer + * + * Unregisters and releases the framebuffer + */ +void fbtft_remove_common(struct device *dev, struct fb_info *info) +{ + struct fbtft_par *par; + + par = info->par; + if (par) + fbtft_par_dbg(DEBUG_DRIVER_INIT_FUNCTIONS, par, + "%s()\n", __func__); + fbtft_unregister_framebuffer(info); + fbtft_framebuffer_release(info); +} +EXPORT_SYMBOL(fbtft_remove_common); + +MODULE_LICENSE("GPL"); diff --git a/drivers/staging/fbtft/fbtft-io.c b/drivers/staging/fbtft/fbtft-io.c new file mode 100644 index 000000000..de1904a44 --- /dev/null +++ b/drivers/staging/fbtft/fbtft-io.c @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/export.h> +#include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/spi/spi.h> +#include "fbtft.h" + +int fbtft_write_spi(struct fbtft_par *par, void *buf, size_t len) +{ + struct spi_transfer t = { + .tx_buf = buf, + .len = len, + }; + struct spi_message m; + + fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len, + "%s(len=%zu): ", __func__, len); + + if (!par->spi) { + dev_err(par->info->device, + "%s: par->spi is unexpectedly NULL\n", __func__); + return -1; + } + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + return spi_sync(par->spi, &m); +} +EXPORT_SYMBOL(fbtft_write_spi); + +/** + * fbtft_write_spi_emulate_9() - write SPI emulating 9-bit + * @par: Driver data + * @buf: Buffer to write + * @len: Length of buffer (must be divisible by 8) + * + * When 9-bit SPI is not available, this function can be used to emulate that. + * par->extra must hold a transformation buffer used for transfer. + */ +int fbtft_write_spi_emulate_9(struct fbtft_par *par, void *buf, size_t len) +{ + u16 *src = buf; + u8 *dst = par->extra; + size_t size = len / 2; + size_t added = 0; + int bits, i, j; + u64 val, dc, tmp; + + fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len, + "%s(len=%zu): ", __func__, len); + + if (!par->extra) { + dev_err(par->info->device, "%s: error: par->extra is NULL\n", + __func__); + return -EINVAL; + } + if ((len % 8) != 0) { + dev_err(par->info->device, + "error: len=%zu must be divisible by 8\n", len); + return -EINVAL; + } + + for (i = 0; i < size; i += 8) { + tmp = 0; + bits = 63; + for (j = 0; j < 7; j++) { + dc = (*src & 0x0100) ? 1 : 0; + val = *src & 0x00FF; + tmp |= dc << bits; + bits -= 8; + tmp |= val << bits--; + src++; + } + tmp |= ((*src & 0x0100) ? 1 : 0); + *(__be64 *)dst = cpu_to_be64(tmp); + dst += 8; + *dst++ = (u8)(*src++ & 0x00FF); + added++; + } + + return spi_write(par->spi, par->extra, size + added); +} +EXPORT_SYMBOL(fbtft_write_spi_emulate_9); + +int fbtft_read_spi(struct fbtft_par *par, void *buf, size_t len) +{ + int ret; + u8 txbuf[32] = { 0, }; + struct spi_transfer t = { + .speed_hz = 2000000, + .rx_buf = buf, + .len = len, + }; + struct spi_message m; + + if (!par->spi) { + dev_err(par->info->device, + "%s: par->spi is unexpectedly NULL\n", __func__); + return -ENODEV; + } + + if (par->startbyte) { + if (len > 32) { + dev_err(par->info->device, + "len=%zu can't be larger than 32 when using 'startbyte'\n", + len); + return -EINVAL; + } + txbuf[0] = par->startbyte | 0x3; + t.tx_buf = txbuf; + fbtft_par_dbg_hex(DEBUG_READ, par, par->info->device, u8, + txbuf, len, "%s(len=%zu) txbuf => ", + __func__, len); + } + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + ret = spi_sync(par->spi, &m); + fbtft_par_dbg_hex(DEBUG_READ, par, par->info->device, u8, buf, len, + "%s(len=%zu) buf <= ", __func__, len); + + return ret; +} +EXPORT_SYMBOL(fbtft_read_spi); + +/* + * Optimized use of gpiolib is twice as fast as no optimization + * only one driver can use the optimized version at a time + */ +int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len) +{ + u8 data; + int i; +#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO + static u8 prev_data; +#endif + + fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len, + "%s(len=%zu): ", __func__, len); + + while (len--) { + data = *(u8 *)buf; + + /* Start writing by pulling down /WR */ + gpiod_set_value(par->gpio.wr, 1); + + /* Set data */ +#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO + if (data == prev_data) { + gpiod_set_value(par->gpio.wr, 1); /* used as delay */ + } else { + for (i = 0; i < 8; i++) { + if ((data & 1) != (prev_data & 1)) + gpiod_set_value(par->gpio.db[i], + data & 1); + data >>= 1; + prev_data >>= 1; + } + } +#else + for (i = 0; i < 8; i++) { + gpiod_set_value(par->gpio.db[i], data & 1); + data >>= 1; + } +#endif + + /* Pullup /WR */ + gpiod_set_value(par->gpio.wr, 0); + +#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO + prev_data = *(u8 *)buf; +#endif + buf++; + } + + return 0; +} +EXPORT_SYMBOL(fbtft_write_gpio8_wr); + +int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len) +{ + u16 data; + int i; +#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO + static u16 prev_data; +#endif + + fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len, + "%s(len=%zu): ", __func__, len); + + while (len) { + data = *(u16 *)buf; + + /* Start writing by pulling down /WR */ + gpiod_set_value(par->gpio.wr, 1); + + /* Set data */ +#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO + if (data == prev_data) { + gpiod_set_value(par->gpio.wr, 1); /* used as delay */ + } else { + for (i = 0; i < 16; i++) { + if ((data & 1) != (prev_data & 1)) + gpiod_set_value(par->gpio.db[i], + data & 1); + data >>= 1; + prev_data >>= 1; + } + } +#else + for (i = 0; i < 16; i++) { + gpiod_set_value(par->gpio.db[i], data & 1); + data >>= 1; + } +#endif + + /* Pullup /WR */ + gpiod_set_value(par->gpio.wr, 0); + +#ifndef DO_NOT_OPTIMIZE_FBTFT_WRITE_GPIO + prev_data = *(u16 *)buf; +#endif + buf += 2; + len -= 2; + } + + return 0; +} +EXPORT_SYMBOL(fbtft_write_gpio16_wr); + +int fbtft_write_gpio16_wr_latched(struct fbtft_par *par, void *buf, size_t len) +{ + dev_err(par->info->device, "%s: function not implemented\n", __func__); + return -1; +} +EXPORT_SYMBOL(fbtft_write_gpio16_wr_latched); diff --git a/drivers/staging/fbtft/fbtft-sysfs.c b/drivers/staging/fbtft/fbtft-sysfs.c new file mode 100644 index 000000000..39e8d2806 --- /dev/null +++ b/drivers/staging/fbtft/fbtft-sysfs.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "fbtft.h" +#include "internal.h" + +static int get_next_ulong(char **str_p, unsigned long *val, char *sep, int base) +{ + char *p_val; + + if (!str_p || !(*str_p)) + return -EINVAL; + + p_val = strsep(str_p, sep); + + if (!p_val) + return -EINVAL; + + return kstrtoul(p_val, base, val); +} + +int fbtft_gamma_parse_str(struct fbtft_par *par, u32 *curves, + const char *str, int size) +{ + char *str_p, *curve_p = NULL; + char *tmp; + unsigned long val = 0; + int ret = 0; + int curve_counter, value_counter; + int _count; + + fbtft_par_dbg(DEBUG_SYSFS, par, "%s() str=\n", __func__); + + if (!str || !curves) + return -EINVAL; + + fbtft_par_dbg(DEBUG_SYSFS, par, "%s\n", str); + + tmp = kmemdup(str, size + 1, GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + /* replace optional separators */ + str_p = tmp; + while (*str_p) { + if (*str_p == ',') + *str_p = ' '; + if (*str_p == ';') + *str_p = '\n'; + str_p++; + } + + str_p = strim(tmp); + + curve_counter = 0; + while (str_p) { + if (curve_counter == par->gamma.num_curves) { + dev_err(par->info->device, "Gamma: Too many curves\n"); + ret = -EINVAL; + goto out; + } + curve_p = strsep(&str_p, "\n"); + value_counter = 0; + while (curve_p) { + if (value_counter == par->gamma.num_values) { + dev_err(par->info->device, + "Gamma: Too many values\n"); + ret = -EINVAL; + goto out; + } + ret = get_next_ulong(&curve_p, &val, " ", 16); + if (ret) + goto out; + + _count = curve_counter * par->gamma.num_values + + value_counter; + curves[_count] = val; + value_counter++; + } + if (value_counter != par->gamma.num_values) { + dev_err(par->info->device, "Gamma: Too few values\n"); + ret = -EINVAL; + goto out; + } + curve_counter++; + } + if (curve_counter != par->gamma.num_curves) { + dev_err(par->info->device, "Gamma: Too few curves\n"); + ret = -EINVAL; + goto out; + } + +out: + kfree(tmp); + return ret; +} + +static ssize_t +sprintf_gamma(struct fbtft_par *par, u32 *curves, char *buf) +{ + ssize_t len = 0; + unsigned int i, j; + + mutex_lock(&par->gamma.lock); + for (i = 0; i < par->gamma.num_curves; i++) { + for (j = 0; j < par->gamma.num_values; j++) + len += scnprintf(&buf[len], PAGE_SIZE, + "%04x ", curves[i * par->gamma.num_values + j]); + buf[len - 1] = '\n'; + } + mutex_unlock(&par->gamma.lock); + + return len; +} + +static ssize_t store_gamma_curve(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fb_info *fb_info = dev_get_drvdata(device); + struct fbtft_par *par = fb_info->par; + u32 tmp_curves[FBTFT_GAMMA_MAX_VALUES_TOTAL]; + int ret; + + ret = fbtft_gamma_parse_str(par, tmp_curves, buf, count); + if (ret) + return ret; + + ret = par->fbtftops.set_gamma(par, tmp_curves); + if (ret) + return ret; + + mutex_lock(&par->gamma.lock); + memcpy(par->gamma.curves, tmp_curves, + par->gamma.num_curves * par->gamma.num_values * + sizeof(tmp_curves[0])); + mutex_unlock(&par->gamma.lock); + + return count; +} + +static ssize_t show_gamma_curve(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fb_info = dev_get_drvdata(device); + struct fbtft_par *par = fb_info->par; + + return sprintf_gamma(par, par->gamma.curves, buf); +} + +static struct device_attribute gamma_device_attrs[] = { + __ATTR(gamma, 0660, show_gamma_curve, store_gamma_curve), +}; + +void fbtft_expand_debug_value(unsigned long *debug) +{ + switch (*debug & 0x7) { + case 1: + *debug |= DEBUG_LEVEL_1; + break; + case 2: + *debug |= DEBUG_LEVEL_2; + break; + case 3: + *debug |= DEBUG_LEVEL_3; + break; + case 4: + *debug |= DEBUG_LEVEL_4; + break; + case 5: + *debug |= DEBUG_LEVEL_5; + break; + case 6: + *debug |= DEBUG_LEVEL_6; + break; + case 7: + *debug = 0xFFFFFFFF; + break; + } +} + +static ssize_t store_debug(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fb_info *fb_info = dev_get_drvdata(device); + struct fbtft_par *par = fb_info->par; + int ret; + + ret = kstrtoul(buf, 10, &par->debug); + if (ret) + return ret; + fbtft_expand_debug_value(&par->debug); + + return count; +} + +static ssize_t show_debug(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct fb_info *fb_info = dev_get_drvdata(device); + struct fbtft_par *par = fb_info->par; + + return sysfs_emit(buf, "%lu\n", par->debug); +} + +static struct device_attribute debug_device_attr = + __ATTR(debug, 0660, show_debug, store_debug); + +void fbtft_sysfs_init(struct fbtft_par *par) +{ + device_create_file(par->info->dev, &debug_device_attr); + if (par->gamma.curves && par->fbtftops.set_gamma) + device_create_file(par->info->dev, &gamma_device_attrs[0]); +} + +void fbtft_sysfs_exit(struct fbtft_par *par) +{ + device_remove_file(par->info->dev, &debug_device_attr); + if (par->gamma.curves && par->fbtftops.set_gamma) + device_remove_file(par->info->dev, &gamma_device_attrs[0]); +} diff --git a/drivers/staging/fbtft/fbtft.h b/drivers/staging/fbtft/fbtft.h new file mode 100644 index 000000000..2c2b5f1c1 --- /dev/null +++ b/drivers/staging/fbtft/fbtft.h @@ -0,0 +1,444 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* Copyright (C) 2013 Noralf Tronnes */ + +#ifndef __LINUX_FBTFT_H +#define __LINUX_FBTFT_H + +#include <linux/fb.h> +#include <linux/spinlock.h> +#include <linux/spi/spi.h> +#include <linux/platform_device.h> + +#define FBTFT_ONBOARD_BACKLIGHT 2 + +#define FBTFT_GPIO_NO_MATCH 0xFFFF +#define FBTFT_GPIO_NAME_SIZE 32 +#define FBTFT_MAX_INIT_SEQUENCE 512 +#define FBTFT_GAMMA_MAX_VALUES_TOTAL 128 + +#define FBTFT_OF_INIT_CMD BIT(24) +#define FBTFT_OF_INIT_DELAY BIT(25) + +/** + * struct fbtft_gpio - Structure that holds one pinname to gpio mapping + * @name: pinname (reset, dc, etc.) + * @gpio: GPIO number + * + */ +struct fbtft_gpio { + char name[FBTFT_GPIO_NAME_SIZE]; + struct gpio_desc *gpio; +}; + +struct fbtft_par; + +/** + * struct fbtft_ops - FBTFT operations structure + * @write: Writes to interface bus + * @read: Reads from interface bus + * @write_vmem: Writes video memory to display + * @write_reg: Writes to controller register + * @set_addr_win: Set the GRAM update window + * @reset: Reset the LCD controller + * @mkdirty: Marks display lines for update + * @update_display: Updates the display + * @init_display: Initializes the display + * @blank: Blank the display (optional) + * @request_gpios_match: Do pinname to gpio matching + * @request_gpios: Request gpios from the kernel + * @free_gpios: Free previously requested gpios + * @verify_gpios: Verify that necessary gpios is present (optional) + * @register_backlight: Used to register backlight device (optional) + * @unregister_backlight: Unregister backlight device (optional) + * @set_var: Configure LCD with values from variables like @rotate and @bgr + * (optional) + * @set_gamma: Set Gamma curve (optional) + * + * Most of these operations have default functions assigned to them in + * fbtft_framebuffer_alloc() + */ +struct fbtft_ops { + int (*write)(struct fbtft_par *par, void *buf, size_t len); + int (*read)(struct fbtft_par *par, void *buf, size_t len); + int (*write_vmem)(struct fbtft_par *par, size_t offset, size_t len); + void (*write_register)(struct fbtft_par *par, int len, ...); + + void (*set_addr_win)(struct fbtft_par *par, + int xs, int ys, int xe, int ye); + void (*reset)(struct fbtft_par *par); + void (*mkdirty)(struct fb_info *info, int from, int to); + void (*update_display)(struct fbtft_par *par, + unsigned int start_line, unsigned int end_line); + int (*init_display)(struct fbtft_par *par); + int (*blank)(struct fbtft_par *par, bool on); + + unsigned long (*request_gpios_match)(struct fbtft_par *par, + const struct fbtft_gpio *gpio); + int (*request_gpios)(struct fbtft_par *par); + int (*verify_gpios)(struct fbtft_par *par); + + void (*register_backlight)(struct fbtft_par *par); + void (*unregister_backlight)(struct fbtft_par *par); + + int (*set_var)(struct fbtft_par *par); + int (*set_gamma)(struct fbtft_par *par, u32 *curves); +}; + +/** + * struct fbtft_display - Describes the display properties + * @width: Width of display in pixels + * @height: Height of display in pixels + * @regwidth: LCD Controller Register width in bits + * @buswidth: Display interface bus width in bits + * @backlight: Backlight type. + * @fbtftops: FBTFT operations provided by driver or device (platform_data) + * @bpp: Bits per pixel + * @fps: Frames per second + * @txbuflen: Size of transmit buffer + * @init_sequence: Pointer to LCD initialization array + * @gamma: String representation of Gamma curve(s) + * @gamma_num: Number of Gamma curves + * @gamma_len: Number of values per Gamma curve + * @debug: Initial debug value + * + * This structure is not stored by FBTFT except for init_sequence. + */ +struct fbtft_display { + unsigned int width; + unsigned int height; + unsigned int regwidth; + unsigned int buswidth; + unsigned int backlight; + struct fbtft_ops fbtftops; + unsigned int bpp; + unsigned int fps; + int txbuflen; + const s16 *init_sequence; + char *gamma; + int gamma_num; + int gamma_len; + unsigned long debug; +}; + +/** + * struct fbtft_platform_data - Passes display specific data to the driver + * @display: Display properties + * @gpios: Pointer to an array of pinname to gpio mappings + * @rotate: Display rotation angle + * @bgr: LCD Controller BGR bit + * @fps: Frames per second (this will go away, use @fps in @fbtft_display) + * @txbuflen: Size of transmit buffer + * @startbyte: When set, enables use of Startbyte in transfers + * @gamma: String representation of Gamma curve(s) + * @extra: A way to pass extra info + */ +struct fbtft_platform_data { + struct fbtft_display display; + unsigned int rotate; + bool bgr; + unsigned int fps; + int txbuflen; + u8 startbyte; + char *gamma; + void *extra; +}; + +/** + * struct fbtft_par - Main FBTFT data structure + * + * This structure holds all relevant data to operate the display + * + * See sourcefile for documentation since nested structs is not + * supported by kernel-doc. + * + */ +/* @spi: Set if it is a SPI device + * @pdev: Set if it is a platform device + * @info: Pointer to framebuffer fb_info structure + * @pdata: Pointer to platform data + * @ssbuf: Not used + * @pseudo_palette: Used by fb_set_colreg() + * @txbuf.buf: Transmit buffer + * @txbuf.len: Transmit buffer length + * @buf: Small buffer used when writing init data over SPI + * @startbyte: Used by some controllers when in SPI mode. + * Format: 6 bit Device id + RS bit + RW bit + * @fbtftops: FBTFT operations provided by driver or device (platform_data) + * @dirty_lock: Protects dirty_lines_start and dirty_lines_end + * @dirty_lines_start: Where to begin updating display + * @dirty_lines_end: Where to end updating display + * @gpio.reset: GPIO used to reset display + * @gpio.dc: Data/Command signal, also known as RS + * @gpio.rd: Read latching signal + * @gpio.wr: Write latching signal + * @gpio.latch: Bus latch signal, eg. 16->8 bit bus latch + * @gpio.cs: LCD Chip Select with parallel interface bus + * @gpio.db[16]: Parallel databus + * @gpio.led[16]: Led control signals + * @gpio.aux[16]: Auxiliary signals, not used by core + * @init_sequence: Pointer to LCD initialization array + * @gamma.lock: Mutex for Gamma curve locking + * @gamma.curves: Pointer to Gamma curve array + * @gamma.num_values: Number of values per Gamma curve + * @gamma.num_curves: Number of Gamma curves + * @debug: Pointer to debug value + * @current_debug: + * @first_update_done: Used to only time the first display update + * @update_time: Used to calculate 'fps' in debug output + * @bgr: BGR mode/\n + * @extra: Extra info needed by driver + */ +struct fbtft_par { + struct spi_device *spi; + struct platform_device *pdev; + struct fb_info *info; + struct fbtft_platform_data *pdata; + u16 *ssbuf; + u32 pseudo_palette[16]; + struct { + void *buf; + size_t len; + } txbuf; + u8 *buf; + u8 startbyte; + struct fbtft_ops fbtftops; + spinlock_t dirty_lock; + unsigned int dirty_lines_start; + unsigned int dirty_lines_end; + struct { + struct gpio_desc *reset; + struct gpio_desc *dc; + struct gpio_desc *rd; + struct gpio_desc *wr; + struct gpio_desc *latch; + struct gpio_desc *cs; + struct gpio_desc *db[16]; + struct gpio_desc *led[16]; + struct gpio_desc *aux[16]; + } gpio; + const s16 *init_sequence; + struct { + struct mutex lock; + u32 *curves; + int num_values; + int num_curves; + } gamma; + unsigned long debug; + bool first_update_done; + ktime_t update_time; + bool bgr; + void *extra; + bool polarity; +}; + +#define NUMARGS(...) (sizeof((int[]){__VA_ARGS__}) / sizeof(int)) + +#define write_reg(par, ...) \ + ((par)->fbtftops.write_register(par, NUMARGS(__VA_ARGS__), __VA_ARGS__)) + +/* fbtft-core.c */ +int fbtft_write_buf_dc(struct fbtft_par *par, void *buf, size_t len, int dc); +__printf(5, 6) +void fbtft_dbg_hex(const struct device *dev, int groupsize, + const void *buf, size_t len, const char *fmt, ...); +struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display, + struct device *dev, + struct fbtft_platform_data *pdata); +void fbtft_framebuffer_release(struct fb_info *info); +int fbtft_register_framebuffer(struct fb_info *fb_info); +int fbtft_unregister_framebuffer(struct fb_info *fb_info); +void fbtft_register_backlight(struct fbtft_par *par); +void fbtft_unregister_backlight(struct fbtft_par *par); +int fbtft_init_display(struct fbtft_par *par); +int fbtft_probe_common(struct fbtft_display *display, struct spi_device *sdev, + struct platform_device *pdev); +void fbtft_remove_common(struct device *dev, struct fb_info *info); + +/* fbtft-io.c */ +int fbtft_write_spi(struct fbtft_par *par, void *buf, size_t len); +int fbtft_write_spi_emulate_9(struct fbtft_par *par, void *buf, size_t len); +int fbtft_read_spi(struct fbtft_par *par, void *buf, size_t len); +int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len); +int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len); +int fbtft_write_gpio16_wr_latched(struct fbtft_par *par, void *buf, size_t len); + +/* fbtft-bus.c */ +int fbtft_write_vmem8_bus8(struct fbtft_par *par, size_t offset, size_t len); +int fbtft_write_vmem16_bus16(struct fbtft_par *par, size_t offset, size_t len); +int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len); +int fbtft_write_vmem16_bus9(struct fbtft_par *par, size_t offset, size_t len); +void fbtft_write_reg8_bus8(struct fbtft_par *par, int len, ...); +void fbtft_write_reg8_bus9(struct fbtft_par *par, int len, ...); +void fbtft_write_reg16_bus8(struct fbtft_par *par, int len, ...); +void fbtft_write_reg16_bus16(struct fbtft_par *par, int len, ...); + +#define FBTFT_DT_TABLE(_compatible) \ +static const struct of_device_id dt_ids[] = { \ + { .compatible = _compatible }, \ + {}, \ +}; \ +MODULE_DEVICE_TABLE(of, dt_ids); + +#define FBTFT_SPI_DRIVER(_name, _compatible, _display, _spi_ids) \ + \ +static int fbtft_driver_probe_spi(struct spi_device *spi) \ +{ \ + return fbtft_probe_common(_display, spi, NULL); \ +} \ + \ +static void fbtft_driver_remove_spi(struct spi_device *spi) \ +{ \ + struct fb_info *info = spi_get_drvdata(spi); \ + \ + fbtft_remove_common(&spi->dev, info); \ +} \ + \ +static struct spi_driver fbtft_driver_spi_driver = { \ + .driver = { \ + .name = _name, \ + .of_match_table = dt_ids, \ + }, \ + .id_table = _spi_ids, \ + .probe = fbtft_driver_probe_spi, \ + .remove = fbtft_driver_remove_spi, \ +}; + +#define FBTFT_REGISTER_DRIVER(_name, _compatible, _display) \ + \ +static int fbtft_driver_probe_pdev(struct platform_device *pdev) \ +{ \ + return fbtft_probe_common(_display, NULL, pdev); \ +} \ + \ +static int fbtft_driver_remove_pdev(struct platform_device *pdev) \ +{ \ + struct fb_info *info = platform_get_drvdata(pdev); \ + \ + fbtft_remove_common(&pdev->dev, info); \ + return 0; \ +} \ + \ +FBTFT_DT_TABLE(_compatible) \ + \ +FBTFT_SPI_DRIVER(_name, _compatible, _display, NULL) \ + \ +static struct platform_driver fbtft_driver_platform_driver = { \ + .driver = { \ + .name = _name, \ + .owner = THIS_MODULE, \ + .of_match_table = dt_ids, \ + }, \ + .probe = fbtft_driver_probe_pdev, \ + .remove = fbtft_driver_remove_pdev, \ +}; \ + \ +static int __init fbtft_driver_module_init(void) \ +{ \ + int ret; \ + \ + ret = spi_register_driver(&fbtft_driver_spi_driver); \ + if (ret < 0) \ + return ret; \ + ret = platform_driver_register(&fbtft_driver_platform_driver); \ + if (ret < 0) \ + spi_unregister_driver(&fbtft_driver_spi_driver); \ + return ret; \ +} \ + \ +static void __exit fbtft_driver_module_exit(void) \ +{ \ + spi_unregister_driver(&fbtft_driver_spi_driver); \ + platform_driver_unregister(&fbtft_driver_platform_driver); \ +} \ + \ +module_init(fbtft_driver_module_init); \ +module_exit(fbtft_driver_module_exit); + +#define FBTFT_REGISTER_SPI_DRIVER(_name, _comp_vend, _comp_dev, _display) \ + \ +FBTFT_DT_TABLE(_comp_vend "," _comp_dev) \ + \ +static const struct spi_device_id spi_ids[] = { \ + { .name = _comp_dev }, \ + {}, \ +}; \ +MODULE_DEVICE_TABLE(spi, spi_ids); \ + \ +FBTFT_SPI_DRIVER(_name, _comp_vend "," _comp_dev, _display, spi_ids) \ + \ +module_spi_driver(fbtft_driver_spi_driver); + +/* Debug macros */ + +/* shorthand debug levels */ +#define DEBUG_LEVEL_1 DEBUG_REQUEST_GPIOS +#define DEBUG_LEVEL_2 (DEBUG_LEVEL_1 | DEBUG_DRIVER_INIT_FUNCTIONS \ + | DEBUG_TIME_FIRST_UPDATE) +#define DEBUG_LEVEL_3 (DEBUG_LEVEL_2 | DEBUG_RESET | DEBUG_INIT_DISPLAY \ + | DEBUG_BLANK | DEBUG_REQUEST_GPIOS \ + | DEBUG_FREE_GPIOS \ + | DEBUG_VERIFY_GPIOS \ + | DEBUG_BACKLIGHT | DEBUG_SYSFS) +#define DEBUG_LEVEL_4 (DEBUG_LEVEL_2 | DEBUG_FB_READ | DEBUG_FB_WRITE \ + | DEBUG_FB_FILLRECT \ + | DEBUG_FB_COPYAREA \ + | DEBUG_FB_IMAGEBLIT | DEBUG_FB_BLANK) +#define DEBUG_LEVEL_5 (DEBUG_LEVEL_3 | DEBUG_UPDATE_DISPLAY) +#define DEBUG_LEVEL_6 (DEBUG_LEVEL_4 | DEBUG_LEVEL_5) +#define DEBUG_LEVEL_7 0xFFFFFFFF + +#define DEBUG_DRIVER_INIT_FUNCTIONS BIT(3) +#define DEBUG_TIME_FIRST_UPDATE BIT(4) +#define DEBUG_TIME_EACH_UPDATE BIT(5) +#define DEBUG_DEFERRED_IO BIT(6) +#define DEBUG_FBTFT_INIT_FUNCTIONS BIT(7) + +/* fbops */ +#define DEBUG_FB_READ BIT(8) +#define DEBUG_FB_WRITE BIT(9) +#define DEBUG_FB_FILLRECT BIT(10) +#define DEBUG_FB_COPYAREA BIT(11) +#define DEBUG_FB_IMAGEBLIT BIT(12) +#define DEBUG_FB_SETCOLREG BIT(13) +#define DEBUG_FB_BLANK BIT(14) + +#define DEBUG_SYSFS BIT(16) + +/* fbtftops */ +#define DEBUG_BACKLIGHT BIT(17) +#define DEBUG_READ BIT(18) +#define DEBUG_WRITE BIT(19) +#define DEBUG_WRITE_VMEM BIT(20) +#define DEBUG_WRITE_REGISTER BIT(21) +#define DEBUG_SET_ADDR_WIN BIT(22) +#define DEBUG_RESET BIT(23) +#define DEBUG_MKDIRTY BIT(24) +#define DEBUG_UPDATE_DISPLAY BIT(25) +#define DEBUG_INIT_DISPLAY BIT(26) +#define DEBUG_BLANK BIT(27) +#define DEBUG_REQUEST_GPIOS BIT(28) +#define DEBUG_FREE_GPIOS BIT(29) +#define DEBUG_REQUEST_GPIOS_MATCH BIT(30) +#define DEBUG_VERIFY_GPIOS BIT(31) + +#define fbtft_init_dbg(dev, format, arg...) \ +do { \ + if (unlikely((dev)->platform_data && \ + (((struct fbtft_platform_data *)(dev)->platform_data)->display.debug & DEBUG_DRIVER_INIT_FUNCTIONS))) \ + dev_info(dev, format, ##arg); \ +} while (0) + +#define fbtft_par_dbg(level, par, format, arg...) \ +do { \ + if (unlikely((par)->debug & (level))) \ + dev_info((par)->info->device, format, ##arg); \ +} while (0) + +#define fbtft_par_dbg_hex(level, par, dev, type, buf, num, format, arg...) \ +do { \ + if (unlikely((par)->debug & (level))) \ + fbtft_dbg_hex(dev, sizeof(type), buf,\ + (num) * sizeof(type), format, ##arg); \ +} while (0) + +#endif /* __LINUX_FBTFT_H */ diff --git a/drivers/staging/fbtft/internal.h b/drivers/staging/fbtft/internal.h new file mode 100644 index 000000000..ae2ff4a4a --- /dev/null +++ b/drivers/staging/fbtft/internal.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* Copyright (C) 2013 Noralf Tronnes */ + +#ifndef __LINUX_FBTFT_INTERNAL_H +#define __LINUX_FBTFT_INTERNAL_H + +void fbtft_sysfs_init(struct fbtft_par *par); +void fbtft_sysfs_exit(struct fbtft_par *par); +void fbtft_expand_debug_value(unsigned long *debug); +int fbtft_gamma_parse_str(struct fbtft_par *par, u32 *curves, + const char *str, int size); + +#endif /* __LINUX_FBTFT_INTERNAL_H */ |