diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/staging/media/deprecated/cpia2/cpia2.h | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/staging/media/deprecated/cpia2/cpia2.h')
-rw-r--r-- | drivers/staging/media/deprecated/cpia2/cpia2.h | 475 |
1 files changed, 475 insertions, 0 deletions
diff --git a/drivers/staging/media/deprecated/cpia2/cpia2.h b/drivers/staging/media/deprecated/cpia2/cpia2.h new file mode 100644 index 000000000..57b7f1ea6 --- /dev/null +++ b/drivers/staging/media/deprecated/cpia2/cpia2.h @@ -0,0 +1,475 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/**************************************************************************** + * + * Filename: cpia2.h + * + * Copyright 2001, STMicrolectronics, Inc. + * + * Contact: steve.miller@st.com + * + * Description: + * This is a USB driver for CPiA2 based video cameras. + * + * This driver is modelled on the cpia usb driver by + * Jochen Scharrlach and Johannes Erdfeldt. + * + ****************************************************************************/ + +#ifndef __CPIA2_H__ +#define __CPIA2_H__ + +#include <linux/videodev2.h> +#include <linux/usb.h> +#include <linux/poll.h> +#include <media/v4l2-common.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> + +#include "cpia2_registers.h" + +/* define for verbose debug output */ +//#define _CPIA2_DEBUG_ + +/*** + * Image defines + ***/ + +/* Misc constants */ +#define ALLOW_CORRUPT 0 /* Causes collater to discard checksum */ + +/* USB Transfer mode */ +#define XFER_ISOC 0 +#define XFER_BULK 1 + +/* USB Alternates */ +#define USBIF_CMDONLY 0 +#define USBIF_BULK 1 +#define USBIF_ISO_1 2 /* 128 bytes/ms */ +#define USBIF_ISO_2 3 /* 384 bytes/ms */ +#define USBIF_ISO_3 4 /* 640 bytes/ms */ +#define USBIF_ISO_4 5 /* 768 bytes/ms */ +#define USBIF_ISO_5 6 /* 896 bytes/ms */ +#define USBIF_ISO_6 7 /* 1023 bytes/ms */ + +/* Flicker Modes */ +#define NEVER_FLICKER 0 +#define FLICKER_60 60 +#define FLICKER_50 50 + +/* Debug flags */ +#define DEBUG_NONE 0 +#define DEBUG_REG 0x00000001 +#define DEBUG_DUMP_PATCH 0x00000002 +#define DEBUG_DUMP_REGS 0x00000004 + +/*** + * Video frame sizes + ***/ +enum { + VIDEOSIZE_VGA = 0, /* 640x480 */ + VIDEOSIZE_CIF, /* 352x288 */ + VIDEOSIZE_QVGA, /* 320x240 */ + VIDEOSIZE_QCIF, /* 176x144 */ + VIDEOSIZE_288_216, + VIDEOSIZE_256_192, + VIDEOSIZE_224_168, + VIDEOSIZE_192_144, +}; + +#define STV_IMAGE_CIF_ROWS 288 +#define STV_IMAGE_CIF_COLS 352 + +#define STV_IMAGE_QCIF_ROWS 144 +#define STV_IMAGE_QCIF_COLS 176 + +#define STV_IMAGE_VGA_ROWS 480 +#define STV_IMAGE_VGA_COLS 640 + +#define STV_IMAGE_QVGA_ROWS 240 +#define STV_IMAGE_QVGA_COLS 320 + +#define JPEG_MARKER_COM (1<<6) /* Comment segment */ + +/*** + * Enums + ***/ +/* Sensor types available with cpia2 asics */ +enum sensors { + CPIA2_SENSOR_410, + CPIA2_SENSOR_500 +}; + +/* Asic types available in the CPiA2 architecture */ +#define CPIA2_ASIC_672 0x67 + +/* Device types (stv672, stv676, etc) */ +#define DEVICE_STV_672 0x0001 +#define DEVICE_STV_676 0x0002 + +enum frame_status { + FRAME_EMPTY, + FRAME_READING, /* In the process of being grabbed into */ + FRAME_READY, /* Ready to be read */ + FRAME_ERROR, +}; + +/*** + * Register access (for USB request byte) + ***/ +enum { + CAMERAACCESS_SYSTEM = 0, + CAMERAACCESS_VC, + CAMERAACCESS_VP, + CAMERAACCESS_IDATA +}; + +#define CAMERAACCESS_TYPE_BLOCK 0x00 +#define CAMERAACCESS_TYPE_RANDOM 0x04 +#define CAMERAACCESS_TYPE_MASK 0x08 +#define CAMERAACCESS_TYPE_REPEAT 0x0C + +#define TRANSFER_READ 0 +#define TRANSFER_WRITE 1 + +#define DEFAULT_ALT USBIF_ISO_6 +#define DEFAULT_BRIGHTNESS 0x46 +#define DEFAULT_CONTRAST 0x93 +#define DEFAULT_SATURATION 0x7f + +/* Power state */ +#define HI_POWER_MODE CPIA2_SYSTEM_CONTROL_HIGH_POWER +#define LO_POWER_MODE CPIA2_SYSTEM_CONTROL_LOW_POWER + + +/******** + * Commands + *******/ +enum { + CPIA2_CMD_NONE = 0, + CPIA2_CMD_GET_VERSION, + CPIA2_CMD_GET_PNP_ID, + CPIA2_CMD_GET_ASIC_TYPE, + CPIA2_CMD_GET_SENSOR, + CPIA2_CMD_GET_VP_DEVICE, + CPIA2_CMD_GET_VP_BRIGHTNESS, + CPIA2_CMD_SET_VP_BRIGHTNESS, + CPIA2_CMD_GET_CONTRAST, + CPIA2_CMD_SET_CONTRAST, + CPIA2_CMD_GET_VP_SATURATION, + CPIA2_CMD_SET_VP_SATURATION, + CPIA2_CMD_GET_VP_GPIO_DIRECTION, + CPIA2_CMD_SET_VP_GPIO_DIRECTION, + CPIA2_CMD_GET_VP_GPIO_DATA, + CPIA2_CMD_SET_VP_GPIO_DATA, + CPIA2_CMD_GET_VC_MP_GPIO_DIRECTION, + CPIA2_CMD_SET_VC_MP_GPIO_DIRECTION, + CPIA2_CMD_GET_VC_MP_GPIO_DATA, + CPIA2_CMD_SET_VC_MP_GPIO_DATA, + CPIA2_CMD_ENABLE_PACKET_CTRL, + CPIA2_CMD_GET_FLICKER_MODES, + CPIA2_CMD_SET_FLICKER_MODES, + CPIA2_CMD_RESET_FIFO, /* clear fifo and enable stream block */ + CPIA2_CMD_SET_HI_POWER, + CPIA2_CMD_SET_LOW_POWER, + CPIA2_CMD_CLEAR_V2W_ERR, + CPIA2_CMD_SET_USER_MODE, + CPIA2_CMD_GET_USER_MODE, + CPIA2_CMD_FRAMERATE_REQ, + CPIA2_CMD_SET_COMPRESSION_STATE, + CPIA2_CMD_GET_WAKEUP, + CPIA2_CMD_SET_WAKEUP, + CPIA2_CMD_GET_PW_CONTROL, + CPIA2_CMD_SET_PW_CONTROL, + CPIA2_CMD_GET_SYSTEM_CTRL, + CPIA2_CMD_SET_SYSTEM_CTRL, + CPIA2_CMD_GET_VP_SYSTEM_STATE, + CPIA2_CMD_GET_VP_SYSTEM_CTRL, + CPIA2_CMD_SET_VP_SYSTEM_CTRL, + CPIA2_CMD_GET_VP_EXP_MODES, + CPIA2_CMD_SET_VP_EXP_MODES, + CPIA2_CMD_GET_DEVICE_CONFIG, + CPIA2_CMD_SET_DEVICE_CONFIG, + CPIA2_CMD_SET_SERIAL_ADDR, + CPIA2_CMD_SET_SENSOR_CR1, + CPIA2_CMD_GET_VC_CONTROL, + CPIA2_CMD_SET_VC_CONTROL, + CPIA2_CMD_SET_TARGET_KB, + CPIA2_CMD_SET_DEF_JPEG_OPT, + CPIA2_CMD_REHASH_VP4, + CPIA2_CMD_GET_USER_EFFECTS, + CPIA2_CMD_SET_USER_EFFECTS +}; + +enum user_cmd { + COMMAND_NONE = 0x00000001, + COMMAND_SET_FPS = 0x00000002, + COMMAND_SET_COLOR_PARAMS = 0x00000004, + COMMAND_GET_COLOR_PARAMS = 0x00000008, + COMMAND_SET_FORMAT = 0x00000010, /* size, etc */ + COMMAND_SET_FLICKER = 0x00000020 +}; + +/*** + * Some defines specific to the 676 chip + ***/ +#define CAMACC_CIF 0x01 +#define CAMACC_VGA 0x02 +#define CAMACC_QCIF 0x04 +#define CAMACC_QVGA 0x08 + + +struct cpia2_register { + u8 index; + u8 value; +}; + +struct cpia2_reg_mask { + u8 index; + u8 and_mask; + u8 or_mask; + u8 fill; +}; + +struct cpia2_command { + u32 command; + u8 req_mode; /* (Block or random) | registerBank */ + u8 reg_count; + u8 direction; + u8 start; + union reg_types { + struct cpia2_register registers[32]; + struct cpia2_reg_mask masks[16]; + u8 block_data[64]; + u8 *patch_data; /* points to function defined block */ + } buffer; +}; + +struct camera_params { + struct { + u8 firmware_revision_hi; /* For system register set (bank 0) */ + u8 firmware_revision_lo; + u8 asic_id; /* Video Compressor set (bank 1) */ + u8 asic_rev; + u8 vp_device_hi; /* Video Processor set (bank 2) */ + u8 vp_device_lo; + u8 sensor_flags; + u8 sensor_rev; + } version; + + struct { + u32 device_type; /* enumerated from vendor/product ids. + * Currently, either STV_672 or STV_676 */ + u16 vendor; + u16 product; + u16 device_revision; + } pnp_id; + + struct { + u8 brightness; /* CPIA2_VP_EXPOSURE_TARGET */ + u8 contrast; /* Note: this is CPIA2_VP_YRANGE */ + u8 saturation; /* CPIA2_VP_SATURATION */ + } color_params; + + struct { + u8 cam_register; + u8 flicker_mode_req; /* 1 if flicker on, else never flicker */ + } flicker_control; + + struct { + u8 jpeg_options; + u8 creep_period; + u8 user_squeeze; + u8 inhibit_htables; + } compression; + + struct { + u8 ohsize; /* output image size */ + u8 ovsize; + u8 hcrop; /* cropping start_pos/4 */ + u8 vcrop; + u8 hphase; /* scaling registers */ + u8 vphase; + u8 hispan; + u8 vispan; + u8 hicrop; + u8 vicrop; + u8 hifraction; + u8 vifraction; + } image_size; + + struct { + int width; /* actual window width */ + int height; /* actual window height */ + } roi; + + struct { + u8 video_mode; + u8 frame_rate; + u8 video_size; /* Not a register, just a convenience for cropped sizes */ + u8 gpio_direction; + u8 gpio_data; + u8 system_ctrl; + u8 system_state; + u8 lowlight_boost; /* Bool: 0 = off, 1 = on */ + u8 device_config; + u8 exposure_modes; + u8 user_effects; + } vp_params; + + struct { + u8 pw_control; + u8 wakeup; + u8 vc_control; + u8 vc_mp_direction; + u8 vc_mp_data; + u8 quality; + } vc_params; + + struct { + u8 power_mode; + u8 system_ctrl; + u8 stream_mode; /* This is the current alternate for usb drivers */ + u8 allow_corrupt; + } camera_state; +}; + +#define NUM_SBUF 2 + +struct cpia2_sbuf { + char *data; + struct urb *urb; +}; + +struct framebuf { + u64 ts; + unsigned long seq; + int num; + int length; + int max_length; + volatile enum frame_status status; + u8 *data; + struct framebuf *next; +}; + +struct camera_data { + /* locks */ + struct v4l2_device v4l2_dev; + struct mutex v4l2_lock; /* serialize file operations */ + struct v4l2_ctrl_handler hdl; + struct { + /* Lights control cluster */ + struct v4l2_ctrl *top_light; + struct v4l2_ctrl *bottom_light; + }; + struct v4l2_ctrl *usb_alt; + + /* camera status */ + int first_image_seen; + enum sensors sensor_type; + u8 flush; + struct v4l2_fh *stream_fh; + u8 mmapped; + int streaming; /* 0 = no, 1 = yes */ + int xfer_mode; /* XFER_BULK or XFER_ISOC */ + struct camera_params params; /* camera settings */ + + /* v4l */ + int video_size; /* VIDEO_SIZE_ */ + struct video_device vdev; /* v4l videodev */ + u32 width; + u32 height; /* Its size */ + __u32 pixelformat; /* Format fourcc */ + + /* USB */ + struct usb_device *dev; + unsigned char iface; + unsigned int cur_alt; + unsigned int old_alt; + struct cpia2_sbuf sbuf[NUM_SBUF]; /* Double buffering */ + + wait_queue_head_t wq_stream; + + /* Buffering */ + u32 frame_size; + int num_frames; + unsigned long frame_count; + u8 *frame_buffer; /* frame buffer data */ + struct framebuf *buffers; + struct framebuf * volatile curbuff; + struct framebuf *workbuff; + + /* MJPEG Extension */ + int APPn; /* Number of APP segment to be written, must be 0..15 */ + int APP_len; /* Length of data in JPEG APPn segment */ + char APP_data[60]; /* Data in the JPEG APPn segment. */ + + int COM_len; /* Length of data in JPEG COM segment */ + char COM_data[60]; /* Data in JPEG COM segment */ +}; + +/* v4l */ +int cpia2_register_camera(struct camera_data *cam); +void cpia2_unregister_camera(struct camera_data *cam); +void cpia2_camera_release(struct v4l2_device *v4l2_dev); + +/* core */ +int cpia2_reset_camera(struct camera_data *cam); +int cpia2_set_low_power(struct camera_data *cam); +void cpia2_dbg_dump_registers(struct camera_data *cam); +int cpia2_match_video_size(int width, int height); +void cpia2_set_camera_state(struct camera_data *cam); +void cpia2_save_camera_state(struct camera_data *cam); +void cpia2_set_color_params(struct camera_data *cam); +void cpia2_set_brightness(struct camera_data *cam, unsigned char value); +void cpia2_set_contrast(struct camera_data *cam, unsigned char value); +void cpia2_set_saturation(struct camera_data *cam, unsigned char value); +int cpia2_set_flicker_mode(struct camera_data *cam, int mode); +void cpia2_set_format(struct camera_data *cam); +int cpia2_send_command(struct camera_data *cam, struct cpia2_command *cmd); +int cpia2_do_command(struct camera_data *cam, + unsigned int command, + unsigned char direction, unsigned char param); +void cpia2_deinit_camera_struct(struct camera_data *cam, struct usb_interface *intf); +struct camera_data *cpia2_init_camera_struct(struct usb_interface *intf); +int cpia2_init_camera(struct camera_data *cam); +int cpia2_allocate_buffers(struct camera_data *cam); +void cpia2_free_buffers(struct camera_data *cam); +long cpia2_read(struct camera_data *cam, + char __user *buf, unsigned long count, int noblock); +__poll_t cpia2_poll(struct camera_data *cam, + struct file *filp, poll_table *wait); +int cpia2_remap_buffer(struct camera_data *cam, struct vm_area_struct *vma); +void cpia2_set_property_flip(struct camera_data *cam, int prop_val); +void cpia2_set_property_mirror(struct camera_data *cam, int prop_val); +int cpia2_set_gpio(struct camera_data *cam, unsigned char setting); +int cpia2_set_fps(struct camera_data *cam, int framerate); + +/* usb */ +int cpia2_usb_init(void); +void cpia2_usb_cleanup(void); +int cpia2_usb_transfer_cmd(struct camera_data *cam, void *registers, + u8 request, u8 start, u8 count, u8 direction); +int cpia2_usb_stream_start(struct camera_data *cam, unsigned int alternate); +int cpia2_usb_stream_stop(struct camera_data *cam); +int cpia2_usb_stream_pause(struct camera_data *cam); +int cpia2_usb_stream_resume(struct camera_data *cam); +int cpia2_usb_change_streaming_alternate(struct camera_data *cam, + unsigned int alt); + + +/* ----------------------- debug functions ---------------------- */ +#ifdef _CPIA2_DEBUG_ +#define ALOG(lev, fmt, args...) printk(lev "%s:%d %s(): " fmt, __FILE__, __LINE__, __func__, ## args) +#define LOG(fmt, args...) ALOG(KERN_INFO, fmt, ## args) +#define ERR(fmt, args...) ALOG(KERN_ERR, fmt, ## args) +#define DBG(fmt, args...) ALOG(KERN_DEBUG, fmt, ## args) +#else +#define ALOG(fmt,args...) printk(fmt,##args) +#define LOG(fmt,args...) ALOG(KERN_INFO "cpia2: "fmt,##args) +#define ERR(fmt,args...) ALOG(KERN_ERR "cpia2: "fmt,##args) +#define DBG(fmn,args...) do {} while(0) +#endif +/* No function or lineno, for shorter lines */ +#define KINFO(fmt, args...) printk(KERN_INFO fmt,##args) + +#endif |