Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 174 insertions, 0 deletions

diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
new file mode 100644
index 000000000..8adfaa183
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker.
+ * Copyright 2020 NXP
+ * Copyright 2020 Puresoftware Ltd.
+ *
+ * This isn't a full driver; it just provides an alternate IRQ
+ * handler to deal with an errata and provide ACPI wrapper.
+ * Everything else is just using the bog standard 8250 support.
+ *
+ * We follow code flow of serial8250_default_handle_irq() but add
+ * a check for a break and insert a dummy read on the Rx for the
+ * immediately following IRQ event.
+ *
+ * We re-use the already existing "bug handling" lsr_saved_flags
+ * field to carry the "what we just did" information from the one
+ * IRQ event to the next one.
+ */
+
+#include <linux/acpi.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include "8250.h"
+
+int fsl8250_handle_irq(struct uart_port *port)
+{
+	unsigned long flags;
+	u16 lsr, orig_lsr;
+	unsigned int iir;
+	struct uart_8250_port *up = up_to_u8250p(port);
+
+	spin_lock_irqsave(&up->port.lock, flags);
+
+	iir = port->serial_in(port, UART_IIR);
+	if (iir & UART_IIR_NO_INT) {
+		spin_unlock_irqrestore(&up->port.lock, flags);
+		return 0;
+	}
+
+	/* This is the WAR; if last event was BRK, then read and return */
+	if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) {
+		up->lsr_saved_flags &= ~UART_LSR_BI;
+		port->serial_in(port, UART_RX);
+		spin_unlock_irqrestore(&up->port.lock, flags);
+		return 1;
+	}
+
+	lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR);
+
+	/* Process incoming characters first */
+	if ((lsr & (UART_LSR_DR | UART_LSR_BI)) &&
+	    (up->ier & (UART_IER_RLSI | UART_IER_RDI))) {
+		lsr = serial8250_rx_chars(up, lsr);
+	}
+
+	/* Stop processing interrupts on input overrun */
+	if ((orig_lsr & UART_LSR_OE) && (up->overrun_backoff_time_ms > 0)) {
+		unsigned long delay;
+
+		up->ier = port->serial_in(port, UART_IER);
+		if (up->ier & (UART_IER_RLSI | UART_IER_RDI)) {
+			port->ops->stop_rx(port);
+		} else {
+			/* Keep restarting the timer until
+			 * the input overrun subsides.
+			 */
+			cancel_delayed_work(&up->overrun_backoff);
+		}
+
+		delay = msecs_to_jiffies(up->overrun_backoff_time_ms);
+		schedule_delayed_work(&up->overrun_backoff, delay);
+	}
+
+	serial8250_modem_status(up);
+
+	if ((lsr & UART_LSR_THRE) && (up->ier & UART_IER_THRI))
+		serial8250_tx_chars(up);
+
+	up->lsr_saved_flags |= orig_lsr & UART_LSR_BI;
+
+	uart_unlock_and_check_sysrq_irqrestore(&up->port, flags);
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(fsl8250_handle_irq);
+
+#ifdef CONFIG_ACPI
+struct fsl8250_data {
+	int	line;
+};
+
+static int fsl8250_acpi_probe(struct platform_device *pdev)
+{
+	struct fsl8250_data *data;
+	struct uart_8250_port port8250;
+	struct device *dev = &pdev->dev;
+	struct resource *regs;
+
+	int ret, irq;
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_err(dev, "no registers defined\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	memset(&port8250, 0, sizeof(port8250));
+
+	ret = device_property_read_u32(dev, "clock-frequency",
+					&port8250.port.uartclk);
+	if (ret)
+		return ret;
+
+	spin_lock_init(&port8250.port.lock);
+
+	port8250.port.mapbase           = regs->start;
+	port8250.port.irq               = irq;
+	port8250.port.handle_irq        = fsl8250_handle_irq;
+	port8250.port.type              = PORT_16550A;
+	port8250.port.flags             = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF
+						| UPF_FIXED_PORT | UPF_IOREMAP
+						| UPF_FIXED_TYPE;
+	port8250.port.dev               = dev;
+	port8250.port.mapsize           = resource_size(regs);
+	port8250.port.iotype            = UPIO_MEM;
+	port8250.port.irqflags          = IRQF_SHARED;
+
+	port8250.port.membase = devm_ioremap(dev,  port8250.port.mapbase,
+							port8250.port.mapsize);
+	if (!port8250.port.membase)
+		return -ENOMEM;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->line = serial8250_register_8250_port(&port8250);
+	if (data->line < 0)
+		return data->line;
+
+	platform_set_drvdata(pdev, data);
+	return 0;
+}
+
+static int fsl8250_acpi_remove(struct platform_device *pdev)
+{
+	struct fsl8250_data *data = platform_get_drvdata(pdev);
+
+	serial8250_unregister_port(data->line);
+	return 0;
+}
+
+static const struct acpi_device_id fsl_8250_acpi_id[] = {
+	{ "NXP0018", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, fsl_8250_acpi_id);
+
+static struct platform_driver fsl8250_platform_driver = {
+	.driver = {
+		.name			= "fsl-16550-uart",
+		.acpi_match_table	= ACPI_PTR(fsl_8250_acpi_id),
+	},
+	.probe			= fsl8250_acpi_probe,
+	.remove			= fsl8250_acpi_remove,
+};
+
+module_platform_driver(fsl8250_platform_driver);
+#endif