Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3118 insertions, 0 deletions

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
new file mode 100644
index 000000000..aa2c51b84
--- /dev/null
+++ b/drivers/tty/serial/samsung_tty.c
@@ -0,0 +1,3118 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver core for Samsung SoC onboard UARTs.
+ *
+ * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ */
+
+/* Note on 2410 error handling
+ *
+ * The s3c2410 manual has a love/hate affair with the contents of the
+ * UERSTAT register in the UART blocks, and keeps marking some of the
+ * error bits as reserved. Having checked with the s3c2410x01,
+ * it copes with BREAKs properly, so I am happy to ignore the RESERVED
+ * feature from the latter versions of the manual.
+ *
+ * If it becomes aparrent that latter versions of the 2410 remove these
+ * bits, then action will have to be taken to differentiate the versions
+ * and change the policy on BREAK
+ *
+ * BJD, 04-Nov-2004
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/sysrq.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/serial_s3c.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <asm/irq.h>
+
+/* UART name and device definitions */
+
+#define S3C24XX_SERIAL_NAME	"ttySAC"
+#define S3C24XX_SERIAL_MAJOR	204
+#define S3C24XX_SERIAL_MINOR	64
+
+#ifdef CONFIG_ARM64
+#define UART_NR			12
+#else
+#define UART_NR			CONFIG_SERIAL_SAMSUNG_UARTS
+#endif
+
+#define S3C24XX_TX_PIO			1
+#define S3C24XX_TX_DMA			2
+#define S3C24XX_RX_PIO			1
+#define S3C24XX_RX_DMA			2
+
+/* flag to ignore all characters coming in */
+#define RXSTAT_DUMMY_READ (0x10000000)
+
+enum s3c24xx_port_type {
+	TYPE_S3C24XX,
+	TYPE_S3C6400,
+	TYPE_APPLE_S5L,
+};
+
+struct s3c24xx_uart_info {
+	const char		*name;
+	enum s3c24xx_port_type	type;
+	unsigned int		port_type;
+	unsigned int		fifosize;
+	unsigned long		rx_fifomask;
+	unsigned long		rx_fifoshift;
+	unsigned long		rx_fifofull;
+	unsigned long		tx_fifomask;
+	unsigned long		tx_fifoshift;
+	unsigned long		tx_fifofull;
+	unsigned int		def_clk_sel;
+	unsigned long		num_clks;
+	unsigned long		clksel_mask;
+	unsigned long		clksel_shift;
+	unsigned long		ucon_mask;
+
+	/* uart port features */
+
+	unsigned int		has_divslot:1;
+};
+
+struct s3c24xx_serial_drv_data {
+	const struct s3c24xx_uart_info	info;
+	const struct s3c2410_uartcfg	def_cfg;
+	const unsigned int		fifosize[UART_NR];
+};
+
+struct s3c24xx_uart_dma {
+	unsigned int			rx_chan_id;
+	unsigned int			tx_chan_id;
+
+	struct dma_slave_config		rx_conf;
+	struct dma_slave_config		tx_conf;
+
+	struct dma_chan			*rx_chan;
+	struct dma_chan			*tx_chan;
+
+	dma_addr_t			rx_addr;
+	dma_addr_t			tx_addr;
+
+	dma_cookie_t			rx_cookie;
+	dma_cookie_t			tx_cookie;
+
+	char				*rx_buf;
+
+	dma_addr_t			tx_transfer_addr;
+
+	size_t				rx_size;
+	size_t				tx_size;
+
+	struct dma_async_tx_descriptor	*tx_desc;
+	struct dma_async_tx_descriptor	*rx_desc;
+
+	int				tx_bytes_requested;
+	int				rx_bytes_requested;
+};
+
+struct s3c24xx_uart_port {
+	unsigned char			rx_claimed;
+	unsigned char			tx_claimed;
+	unsigned char			rx_enabled;
+	unsigned char			tx_enabled;
+	unsigned int			pm_level;
+	unsigned long			baudclk_rate;
+	unsigned int			min_dma_size;
+
+	unsigned int			rx_irq;
+	unsigned int			tx_irq;
+
+	unsigned int			tx_in_progress;
+	unsigned int			tx_mode;
+	unsigned int			rx_mode;
+
+	const struct s3c24xx_uart_info	*info;
+	struct clk			*clk;
+	struct clk			*baudclk;
+	struct uart_port		port;
+	const struct s3c24xx_serial_drv_data	*drv_data;
+
+	/* reference to platform data */
+	const struct s3c2410_uartcfg	*cfg;
+
+	struct s3c24xx_uart_dma		*dma;
+
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
+	struct notifier_block		freq_transition;
+#endif
+};
+
+static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
+
+/* conversion functions */
+
+#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
+
+/* register access controls */
+
+#define portaddr(port, reg) ((port)->membase + (reg))
+#define portaddrl(port, reg) \
+	((unsigned long *)(unsigned long)((port)->membase + (reg)))
+
+static u32 rd_reg(const struct uart_port *port, u32 reg)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		return readb_relaxed(portaddr(port, reg));
+	case UPIO_MEM32:
+		return readl_relaxed(portaddr(port, reg));
+	default:
+		return 0;
+	}
+	return 0;
+}
+
+#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
+
+static void wr_reg(const struct uart_port *port, u32 reg, u32 val)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		writeb_relaxed(val, portaddr(port, reg));
+		break;
+	case UPIO_MEM32:
+		writel_relaxed(val, portaddr(port, reg));
+		break;
+	}
+}
+
+#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
+
+/* Byte-order aware bit setting/clearing functions. */
+
+static inline void s3c24xx_set_bit(const struct uart_port *port, int idx,
+				   unsigned int reg)
+{
+	unsigned long flags;
+	u32 val;
+
+	local_irq_save(flags);
+	val = rd_regl(port, reg);
+	val |= (1 << idx);
+	wr_regl(port, reg, val);
+	local_irq_restore(flags);
+}
+
+static inline void s3c24xx_clear_bit(const struct uart_port *port, int idx,
+				     unsigned int reg)
+{
+	unsigned long flags;
+	u32 val;
+
+	local_irq_save(flags);
+	val = rd_regl(port, reg);
+	val &= ~(1 << idx);
+	wr_regl(port, reg, val);
+	local_irq_restore(flags);
+}
+
+static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
+{
+	return container_of(port, struct s3c24xx_uart_port, port);
+}
+
+/* translate a port to the device name */
+
+static inline const char *s3c24xx_serial_portname(const struct uart_port *port)
+{
+	return to_platform_device(port->dev)->name;
+}
+
+static int s3c24xx_serial_txempty_nofifo(const struct uart_port *port)
+{
+	return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
+}
+
+static void s3c24xx_serial_rx_enable(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	unsigned long flags;
+	unsigned int ucon, ufcon;
+	int count = 10000;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	while (--count && !s3c24xx_serial_txempty_nofifo(port))
+		udelay(100);
+
+	ufcon = rd_regl(port, S3C2410_UFCON);
+	ufcon |= S3C2410_UFCON_RESETRX;
+	wr_regl(port, S3C2410_UFCON, ufcon);
+
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon |= S3C2410_UCON_RXIRQMODE;
+	wr_regl(port, S3C2410_UCON, ucon);
+
+	ourport->rx_enabled = 1;
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_rx_disable(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	unsigned long flags;
+	unsigned int ucon;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= ~S3C2410_UCON_RXIRQMODE;
+	wr_regl(port, S3C2410_UCON, ucon);
+
+	ourport->rx_enabled = 0;
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c24xx_serial_stop_tx(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	struct s3c24xx_uart_dma *dma = ourport->dma;
+	struct circ_buf *xmit = &port->state->xmit;
+	struct dma_tx_state state;
+	int count;
+
+	if (!ourport->tx_enabled)
+		return;
+
+	switch (ourport->info->type) {
+	case TYPE_S3C6400:
+		s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
+		break;
+	case TYPE_APPLE_S5L:
+		s3c24xx_clear_bit(port, APPLE_S5L_UCON_TXTHRESH_ENA, S3C2410_UCON);
+		break;
+	default:
+		disable_irq_nosync(ourport->tx_irq);
+		break;
+	}
+
+	if (dma && dma->tx_chan && ourport->tx_in_progress == S3C24XX_TX_DMA) {
+		dmaengine_pause(dma->tx_chan);
+		dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
+		dmaengine_terminate_all(dma->tx_chan);
+		dma_sync_single_for_cpu(dma->tx_chan->device->dev,
+					dma->tx_transfer_addr, dma->tx_size,
+					DMA_TO_DEVICE);
+		async_tx_ack(dma->tx_desc);
+		count = dma->tx_bytes_requested - state.residue;
+		xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+		port->icount.tx += count;
+	}
+
+	ourport->tx_enabled = 0;
+	ourport->tx_in_progress = 0;
+
+	if (port->flags & UPF_CONS_FLOW)
+		s3c24xx_serial_rx_enable(port);
+
+	ourport->tx_mode = 0;
+}
+
+static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport);
+
+static void s3c24xx_serial_tx_dma_complete(void *args)
+{
+	struct s3c24xx_uart_port *ourport = args;
+	struct uart_port *port = &ourport->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	struct s3c24xx_uart_dma *dma = ourport->dma;
+	struct dma_tx_state state;
+	unsigned long flags;
+	int count;
+
+	dmaengine_tx_status(dma->tx_chan, dma->tx_cookie, &state);
+	count = dma->tx_bytes_requested - state.residue;
+	async_tx_ack(dma->tx_desc);
+
+	dma_sync_single_for_cpu(dma->tx_chan->device->dev,
+				dma->tx_transfer_addr, dma->tx_size,
+				DMA_TO_DEVICE);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+	port->icount.tx += count;
+	ourport->tx_in_progress = 0;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	s3c24xx_serial_start_next_tx(ourport);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
+{
+	const struct uart_port *port = &ourport->port;
+	u32 ucon;
+
+	/* Mask Tx interrupt */
+	switch (ourport->info->type) {
+	case TYPE_S3C6400:
+		s3c24xx_set_bit(port, S3C64XX_UINTM_TXD, S3C64XX_UINTM);
+		break;
+	case TYPE_APPLE_S5L:
+		WARN_ON(1); // No DMA
+		break;
+	default:
+		disable_irq_nosync(ourport->tx_irq);
+		break;
+	}
+
+	/* Enable tx dma mode */
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= ~(S3C64XX_UCON_TXBURST_MASK | S3C64XX_UCON_TXMODE_MASK);
+	ucon |= S3C64XX_UCON_TXBURST_1;
+	ucon |= S3C64XX_UCON_TXMODE_DMA;
+	wr_regl(port,  S3C2410_UCON, ucon);
+
+	ourport->tx_mode = S3C24XX_TX_DMA;
+}
+
+static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
+{
+	const struct uart_port *port = &ourport->port;
+	u32 ucon, ufcon;
+
+	/* Set ufcon txtrig */
+	ourport->tx_in_progress = S3C24XX_TX_PIO;
+	ufcon = rd_regl(port, S3C2410_UFCON);
+	wr_regl(port,  S3C2410_UFCON, ufcon);
+
+	/* Enable tx pio mode */
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= ~(S3C64XX_UCON_TXMODE_MASK);
+	ucon |= S3C64XX_UCON_TXMODE_CPU;
+	wr_regl(port,  S3C2410_UCON, ucon);
+
+	/* Unmask Tx interrupt */
+	switch (ourport->info->type) {
+	case TYPE_S3C6400:
+		s3c24xx_clear_bit(port, S3C64XX_UINTM_TXD,
+				  S3C64XX_UINTM);
+		break;
+	case TYPE_APPLE_S5L:
+		ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK;
+		wr_regl(port, S3C2410_UCON, ucon);
+		break;
+	default:
+		enable_irq(ourport->tx_irq);
+		break;
+	}
+
+	ourport->tx_mode = S3C24XX_TX_PIO;
+
+	/*
+	 * The Apple version only has edge triggered TX IRQs, so we need
+	 * to kick off the process by sending some characters here.
+	 */
+	if (ourport->info->type == TYPE_APPLE_S5L)
+		s3c24xx_serial_tx_chars(ourport);
+}
+
+static void s3c24xx_serial_start_tx_pio(struct s3c24xx_uart_port *ourport)
+{
+	if (ourport->tx_mode != S3C24XX_TX_PIO)
+		enable_tx_pio(ourport);
+}
+
+static int s3c24xx_serial_start_tx_dma(struct s3c24xx_uart_port *ourport,
+				      unsigned int count)
+{
+	struct uart_port *port = &ourport->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	struct s3c24xx_uart_dma *dma = ourport->dma;
+
+	if (ourport->tx_mode != S3C24XX_TX_DMA)
+		enable_tx_dma(ourport);
+
+	dma->tx_size = count & ~(dma_get_cache_alignment() - 1);
+	dma->tx_transfer_addr = dma->tx_addr + xmit->tail;
+
+	dma_sync_single_for_device(dma->tx_chan->device->dev,
+				   dma->tx_transfer_addr, dma->tx_size,
+				   DMA_TO_DEVICE);
+
+	dma->tx_desc = dmaengine_prep_slave_single(dma->tx_chan,
+				dma->tx_transfer_addr, dma->tx_size,
+				DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
+	if (!dma->tx_desc) {
+		dev_err(ourport->port.dev, "Unable to get desc for Tx\n");
+		return -EIO;
+	}
+
+	dma->tx_desc->callback = s3c24xx_serial_tx_dma_complete;
+	dma->tx_desc->callback_param = ourport;
+	dma->tx_bytes_requested = dma->tx_size;
+
+	ourport->tx_in_progress = S3C24XX_TX_DMA;
+	dma->tx_cookie = dmaengine_submit(dma->tx_desc);
+	dma_async_issue_pending(dma->tx_chan);
+	return 0;
+}
+
+static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
+{
+	struct uart_port *port = &ourport->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	unsigned long count;
+
+	/* Get data size up to the end of buffer */
+	count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+
+	if (!count) {
+		s3c24xx_serial_stop_tx(port);
+		return;
+	}
+
+	if (!ourport->dma || !ourport->dma->tx_chan ||
+	    count < ourport->min_dma_size ||
+	    xmit->tail & (dma_get_cache_alignment() - 1))
+		s3c24xx_serial_start_tx_pio(ourport);
+	else
+		s3c24xx_serial_start_tx_dma(ourport, count);
+}
+
+static void s3c24xx_serial_start_tx(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	struct circ_buf *xmit = &port->state->xmit;
+
+	if (!ourport->tx_enabled) {
+		if (port->flags & UPF_CONS_FLOW)
+			s3c24xx_serial_rx_disable(port);
+
+		ourport->tx_enabled = 1;
+		if (!ourport->dma || !ourport->dma->tx_chan)
+			s3c24xx_serial_start_tx_pio(ourport);
+	}
+
+	if (ourport->dma && ourport->dma->tx_chan) {
+		if (!uart_circ_empty(xmit) && !ourport->tx_in_progress)
+			s3c24xx_serial_start_next_tx(ourport);
+	}
+}
+
+static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
+		struct tty_port *tty, int count)
+{
+	struct s3c24xx_uart_dma *dma = ourport->dma;
+	int copied;
+
+	if (!count)
+		return;
+
+	dma_sync_single_for_cpu(dma->rx_chan->device->dev, dma->rx_addr,
+				dma->rx_size, DMA_FROM_DEVICE);
+
+	ourport->port.icount.rx += count;
+	if (!tty) {
+		dev_err(ourport->port.dev, "No tty port\n");
+		return;
+	}
+	copied = tty_insert_flip_string(tty,
+			((unsigned char *)(ourport->dma->rx_buf)), count);
+	if (copied != count) {
+		WARN_ON(1);
+		dev_err(ourport->port.dev, "RxData copy to tty layer failed\n");
+	}
+}
+
+static void s3c24xx_serial_stop_rx(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	struct s3c24xx_uart_dma *dma = ourport->dma;
+	struct tty_port *t = &port->state->port;
+	struct dma_tx_state state;
+	enum dma_status dma_status;
+	unsigned int received;
+
+	if (ourport->rx_enabled) {
+		dev_dbg(port->dev, "stopping rx\n");
+		switch (ourport->info->type) {
+		case TYPE_S3C6400:
+			s3c24xx_set_bit(port, S3C64XX_UINTM_RXD,
+					S3C64XX_UINTM);
+			break;
+		case TYPE_APPLE_S5L:
+			s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON);
+			s3c24xx_clear_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON);
+			break;
+		default:
+			disable_irq_nosync(ourport->rx_irq);
+			break;
+		}
+		ourport->rx_enabled = 0;
+	}
+	if (dma && dma->rx_chan) {
+		dmaengine_pause(dma->tx_chan);
+		dma_status = dmaengine_tx_status(dma->rx_chan,
+				dma->rx_cookie, &state);
+		if (dma_status == DMA_IN_PROGRESS ||
+			dma_status == DMA_PAUSED) {
+			received = dma->rx_bytes_requested - state.residue;
+			dmaengine_terminate_all(dma->rx_chan);
+			s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
+		}
+	}
+}
+
+static inline const struct s3c24xx_uart_info
+	*s3c24xx_port_to_info(struct uart_port *port)
+{
+	return to_ourport(port)->info;
+}
+
+static inline const struct s3c2410_uartcfg
+	*s3c24xx_port_to_cfg(const struct uart_port *port)
+{
+	const struct s3c24xx_uart_port *ourport;
+
+	if (port->dev == NULL)
+		return NULL;
+
+	ourport = container_of(port, struct s3c24xx_uart_port, port);
+	return ourport->cfg;
+}
+
+static int s3c24xx_serial_rx_fifocnt(const struct s3c24xx_uart_port *ourport,
+				     unsigned long ufstat)
+{
+	const struct s3c24xx_uart_info *info = ourport->info;
+
+	if (ufstat & info->rx_fifofull)
+		return ourport->port.fifosize;
+
+	return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
+}
+
+static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport);
+static void s3c24xx_serial_rx_dma_complete(void *args)
+{
+	struct s3c24xx_uart_port *ourport = args;
+	struct uart_port *port = &ourport->port;
+
+	struct s3c24xx_uart_dma *dma = ourport->dma;
+	struct tty_port *t = &port->state->port;
+	struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
+
+	struct dma_tx_state state;
+	unsigned long flags;
+	int received;
+
+	dmaengine_tx_status(dma->rx_chan,  dma->rx_cookie, &state);
+	received  = dma->rx_bytes_requested - state.residue;
+	async_tx_ack(dma->rx_desc);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	if (received)
+		s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
+
+	if (tty) {
+		tty_flip_buffer_push(t);
+		tty_kref_put(tty);
+	}
+
+	s3c64xx_start_rx_dma(ourport);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void s3c64xx_start_rx_dma(struct s3c24xx_uart_port *ourport)
+{
+	struct s3c24xx_uart_dma *dma = ourport->dma;
+
+	dma_sync_single_for_device(dma->rx_chan->device->dev, dma->rx_addr,
+				   dma->rx_size, DMA_FROM_DEVICE);
+
+	dma->rx_desc = dmaengine_prep_slave_single(dma->rx_chan,
+				dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM,
+				DMA_PREP_INTERRUPT);
+	if (!dma->rx_desc) {
+		dev_err(ourport->port.dev, "Unable to get desc for Rx\n");
+		return;
+	}
+
+	dma->rx_desc->callback = s3c24xx_serial_rx_dma_complete;
+	dma->rx_desc->callback_param = ourport;
+	dma->rx_bytes_requested = dma->rx_size;
+
+	dma->rx_cookie = dmaengine_submit(dma->rx_desc);
+	dma_async_issue_pending(dma->rx_chan);
+}
+
+/* ? - where has parity gone?? */
+#define S3C2410_UERSTAT_PARITY (0x1000)
+
+static void enable_rx_dma(struct s3c24xx_uart_port *ourport)
+{
+	struct uart_port *port = &ourport->port;
+	unsigned int ucon;
+
+	/* set Rx mode to DMA mode */
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= ~(S3C64XX_UCON_RXBURST_MASK |
+			S3C64XX_UCON_TIMEOUT_MASK |
+			S3C64XX_UCON_EMPTYINT_EN |
+			S3C64XX_UCON_DMASUS_EN |
+			S3C64XX_UCON_TIMEOUT_EN |
+			S3C64XX_UCON_RXMODE_MASK);
+	ucon |= S3C64XX_UCON_RXBURST_1 |
+			0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
+			S3C64XX_UCON_EMPTYINT_EN |
+			S3C64XX_UCON_TIMEOUT_EN |
+			S3C64XX_UCON_RXMODE_DMA;
+	wr_regl(port, S3C2410_UCON, ucon);
+
+	ourport->rx_mode = S3C24XX_RX_DMA;
+}
+
+static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
+{
+	struct uart_port *port = &ourport->port;
+	unsigned int ucon;
+
+	/* set Rx mode to DMA mode */
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= ~S3C64XX_UCON_RXMODE_MASK;
+	ucon |= S3C64XX_UCON_RXMODE_CPU;
+
+	/* Apple types use these bits for IRQ masks */
+	if (ourport->info->type != TYPE_APPLE_S5L) {
+		ucon &= ~(S3C64XX_UCON_TIMEOUT_MASK |
+				S3C64XX_UCON_EMPTYINT_EN |
+				S3C64XX_UCON_DMASUS_EN |
+				S3C64XX_UCON_TIMEOUT_EN);
+		ucon |= 0xf << S3C64XX_UCON_TIMEOUT_SHIFT |
+				S3C64XX_UCON_TIMEOUT_EN;
+	}
+	wr_regl(port, S3C2410_UCON, ucon);
+
+	ourport->rx_mode = S3C24XX_RX_PIO;
+}
+
+static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport);
+
+static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
+{
+	unsigned int utrstat, received;
+	struct s3c24xx_uart_port *ourport = dev_id;
+	struct uart_port *port = &ourport->port;
+	struct s3c24xx_uart_dma *dma = ourport->dma;
+	struct tty_struct *tty = tty_port_tty_get(&ourport->port.state->port);
+	struct tty_port *t = &port->state->port;
+	struct dma_tx_state state;
+
+	utrstat = rd_regl(port, S3C2410_UTRSTAT);
+	rd_regl(port, S3C2410_UFSTAT);
+
+	spin_lock(&port->lock);
+
+	if (!(utrstat & S3C2410_UTRSTAT_TIMEOUT)) {
+		s3c64xx_start_rx_dma(ourport);
+		if (ourport->rx_mode == S3C24XX_RX_PIO)
+			enable_rx_dma(ourport);
+		goto finish;
+	}
+
+	if (ourport->rx_mode == S3C24XX_RX_DMA) {
+		dmaengine_pause(dma->rx_chan);
+		dmaengine_tx_status(dma->rx_chan, dma->rx_cookie, &state);
+		dmaengine_terminate_all(dma->rx_chan);
+		received = dma->rx_bytes_requested - state.residue;
+		s3c24xx_uart_copy_rx_to_tty(ourport, t, received);
+
+		enable_rx_pio(ourport);
+	}
+
+	s3c24xx_serial_rx_drain_fifo(ourport);
+
+	if (tty) {
+		tty_flip_buffer_push(t);
+		tty_kref_put(tty);
+	}
+
+	wr_regl(port, S3C2410_UTRSTAT, S3C2410_UTRSTAT_TIMEOUT);
+
+finish:
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
+{
+	struct uart_port *port = &ourport->port;
+	unsigned int ufcon, ch, flag, ufstat, uerstat;
+	unsigned int fifocnt = 0;
+	int max_count = port->fifosize;
+
+	while (max_count-- > 0) {
+		/*
+		 * Receive all characters known to be in FIFO
+		 * before reading FIFO level again
+		 */
+		if (fifocnt == 0) {
+			ufstat = rd_regl(port, S3C2410_UFSTAT);
+			fifocnt = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
+			if (fifocnt == 0)
+				break;
+		}
+		fifocnt--;
+
+		uerstat = rd_regl(port, S3C2410_UERSTAT);
+		ch = rd_reg(port, S3C2410_URXH);
+
+		if (port->flags & UPF_CONS_FLOW) {
+			int txe = s3c24xx_serial_txempty_nofifo(port);
+
+			if (ourport->rx_enabled) {
+				if (!txe) {
+					ourport->rx_enabled = 0;
+					continue;
+				}
+			} else {
+				if (txe) {
+					ufcon = rd_regl(port, S3C2410_UFCON);
+					ufcon |= S3C2410_UFCON_RESETRX;
+					wr_regl(port, S3C2410_UFCON, ufcon);
+					ourport->rx_enabled = 1;
+					return;
+				}
+				continue;
+			}
+		}
+
+		/* insert the character into the buffer */
+
+		flag = TTY_NORMAL;
+		port->icount.rx++;
+
+		if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
+			dev_dbg(port->dev,
+				"rxerr: port ch=0x%02x, rxs=0x%08x\n",
+				ch, uerstat);
+
+			/* check for break */
+			if (uerstat & S3C2410_UERSTAT_BREAK) {
+				dev_dbg(port->dev, "break!\n");
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue; /* Ignore character */
+			}
+
+			if (uerstat & S3C2410_UERSTAT_FRAME)
+				port->icount.frame++;
+			if (uerstat & S3C2410_UERSTAT_OVERRUN)
+				port->icount.overrun++;
+
+			uerstat &= port->read_status_mask;
+
+			if (uerstat & S3C2410_UERSTAT_BREAK)
+				flag = TTY_BREAK;
+			else if (uerstat & S3C2410_UERSTAT_PARITY)
+				flag = TTY_PARITY;
+			else if (uerstat & (S3C2410_UERSTAT_FRAME |
+					    S3C2410_UERSTAT_OVERRUN))
+				flag = TTY_FRAME;
+		}
+
+		if (uart_handle_sysrq_char(port, ch))
+			continue; /* Ignore character */
+
+		uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
+				 ch, flag);
+	}
+
+	tty_flip_buffer_push(&port->state->port);
+}
+
+static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
+{
+	struct s3c24xx_uart_port *ourport = dev_id;
+	struct uart_port *port = &ourport->port;
+
+	spin_lock(&port->lock);
+	s3c24xx_serial_rx_drain_fifo(ourport);
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t s3c24xx_serial_rx_irq(int irq, void *dev_id)
+{
+	struct s3c24xx_uart_port *ourport = dev_id;
+
+	if (ourport->dma && ourport->dma->rx_chan)
+		return s3c24xx_serial_rx_chars_dma(dev_id);
+	return s3c24xx_serial_rx_chars_pio(dev_id);
+}
+
+static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport)
+{
+	struct uart_port *port = &ourport->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	int count, dma_count = 0;
+
+	count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+
+	if (ourport->dma && ourport->dma->tx_chan &&
+	    count >= ourport->min_dma_size) {
+		int align = dma_get_cache_alignment() -
+			(xmit->tail & (dma_get_cache_alignment() - 1));
+		if (count - align >= ourport->min_dma_size) {
+			dma_count = count - align;
+			count = align;
+		}
+	}
+
+	if (port->x_char) {
+		wr_reg(port, S3C2410_UTXH, port->x_char);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	/* if there isn't anything more to transmit, or the uart is now
+	 * stopped, disable the uart and exit
+	 */
+
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		s3c24xx_serial_stop_tx(port);
+		return;
+	}
+
+	/* try and drain the buffer... */
+
+	if (count > port->fifosize) {
+		count = port->fifosize;
+		dma_count = 0;
+	}
+
+	while (!uart_circ_empty(xmit) && count > 0) {
+		if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
+			break;
+
+		wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		count--;
+	}
+
+	if (!count && dma_count) {
+		s3c24xx_serial_start_tx_dma(ourport, dma_count);
+		return;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		s3c24xx_serial_stop_tx(port);
+}
+
+static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id)
+{
+	struct s3c24xx_uart_port *ourport = id;
+	struct uart_port *port = &ourport->port;
+
+	spin_lock(&port->lock);
+
+	s3c24xx_serial_tx_chars(ourport);
+
+	spin_unlock(&port->lock);
+	return IRQ_HANDLED;
+}
+
+/* interrupt handler for s3c64xx and later SoC's.*/
+static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
+{
+	const struct s3c24xx_uart_port *ourport = id;
+	const struct uart_port *port = &ourport->port;
+	unsigned int pend = rd_regl(port, S3C64XX_UINTP);
+	irqreturn_t ret = IRQ_HANDLED;
+
+	if (pend & S3C64XX_UINTM_RXD_MSK) {
+		ret = s3c24xx_serial_rx_irq(irq, id);
+		wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_RXD_MSK);
+	}
+	if (pend & S3C64XX_UINTM_TXD_MSK) {
+		ret = s3c24xx_serial_tx_irq(irq, id);
+		wr_regl(port, S3C64XX_UINTP, S3C64XX_UINTM_TXD_MSK);
+	}
+	return ret;
+}
+
+/* interrupt handler for Apple SoC's.*/
+static irqreturn_t apple_serial_handle_irq(int irq, void *id)
+{
+	const struct s3c24xx_uart_port *ourport = id;
+	const struct uart_port *port = &ourport->port;
+	unsigned int pend = rd_regl(port, S3C2410_UTRSTAT);
+	irqreturn_t ret = IRQ_NONE;
+
+	if (pend & (APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO)) {
+		wr_regl(port, S3C2410_UTRSTAT,
+			APPLE_S5L_UTRSTAT_RXTHRESH | APPLE_S5L_UTRSTAT_RXTO);
+		ret = s3c24xx_serial_rx_irq(irq, id);
+	}
+	if (pend & APPLE_S5L_UTRSTAT_TXTHRESH) {
+		wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_TXTHRESH);
+		ret = s3c24xx_serial_tx_irq(irq, id);
+	}
+
+	return ret;
+}
+
+static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
+{
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned long ufstat = rd_regl(port, S3C2410_UFSTAT);
+	unsigned long ufcon = rd_regl(port, S3C2410_UFCON);
+
+	if (ufcon & S3C2410_UFCON_FIFOMODE) {
+		if ((ufstat & info->tx_fifomask) != 0 ||
+		    (ufstat & info->tx_fifofull))
+			return 0;
+
+		return 1;
+	}
+
+	return s3c24xx_serial_txempty_nofifo(port);
+}
+
+/* no modem control lines */
+static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
+{
+	unsigned int umstat = rd_reg(port, S3C2410_UMSTAT);
+
+	if (umstat & S3C2410_UMSTAT_CTS)
+		return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+	else
+		return TIOCM_CAR | TIOCM_DSR;
+}
+
+static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	unsigned int umcon = rd_regl(port, S3C2410_UMCON);
+	unsigned int ucon = rd_regl(port, S3C2410_UCON);
+
+	if (mctrl & TIOCM_RTS)
+		umcon |= S3C2410_UMCOM_RTS_LOW;
+	else
+		umcon &= ~S3C2410_UMCOM_RTS_LOW;
+
+	wr_regl(port, S3C2410_UMCON, umcon);
+
+	if (mctrl & TIOCM_LOOP)
+		ucon |= S3C2410_UCON_LOOPBACK;
+	else
+		ucon &= ~S3C2410_UCON_LOOPBACK;
+
+	wr_regl(port, S3C2410_UCON, ucon);
+}
+
+static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
+{
+	unsigned long flags;
+	unsigned int ucon;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	ucon = rd_regl(port, S3C2410_UCON);
+
+	if (break_state)
+		ucon |= S3C2410_UCON_SBREAK;
+	else
+		ucon &= ~S3C2410_UCON_SBREAK;
+
+	wr_regl(port, S3C2410_UCON, ucon);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
+{
+	struct s3c24xx_uart_dma	*dma = p->dma;
+	struct dma_slave_caps dma_caps;
+	const char *reason = NULL;
+	int ret;
+
+	/* Default slave configuration parameters */
+	dma->rx_conf.direction		= DMA_DEV_TO_MEM;
+	dma->rx_conf.src_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma->rx_conf.src_addr		= p->port.mapbase + S3C2410_URXH;
+	dma->rx_conf.src_maxburst	= 1;
+
+	dma->tx_conf.direction		= DMA_MEM_TO_DEV;
+	dma->tx_conf.dst_addr_width	= DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma->tx_conf.dst_addr		= p->port.mapbase + S3C2410_UTXH;
+	dma->tx_conf.dst_maxburst	= 1;
+
+	dma->rx_chan = dma_request_chan(p->port.dev, "rx");
+
+	if (IS_ERR(dma->rx_chan)) {
+		reason = "DMA RX channel request failed";
+		ret = PTR_ERR(dma->rx_chan);
+		goto err_warn;
+	}
+
+	ret = dma_get_slave_caps(dma->rx_chan, &dma_caps);
+	if (ret < 0 ||
+	    dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
+		reason = "insufficient DMA RX engine capabilities";
+		ret = -EOPNOTSUPP;
+		goto err_release_rx;
+	}
+
+	dmaengine_slave_config(dma->rx_chan, &dma->rx_conf);
+
+	dma->tx_chan = dma_request_chan(p->port.dev, "tx");
+	if (IS_ERR(dma->tx_chan)) {
+		reason = "DMA TX channel request failed";
+		ret = PTR_ERR(dma->tx_chan);
+		goto err_release_rx;
+	}
+
+	ret = dma_get_slave_caps(dma->tx_chan, &dma_caps);
+	if (ret < 0 ||
+	    dma_caps.residue_granularity < DMA_RESIDUE_GRANULARITY_BURST) {
+		reason = "insufficient DMA TX engine capabilities";
+		ret = -EOPNOTSUPP;
+		goto err_release_tx;
+	}
+
+	dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
+
+	/* RX buffer */
+	dma->rx_size = PAGE_SIZE;
+
+	dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL);
+	if (!dma->rx_buf) {
+		ret = -ENOMEM;
+		goto err_release_tx;
+	}
+
+	dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
+				      dma->rx_size, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dma->rx_chan->device->dev, dma->rx_addr)) {
+		reason = "DMA mapping error for RX buffer";
+		ret = -EIO;
+		goto err_free_rx;
+	}
+
+	/* TX buffer */
+	dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
+				      p->port.state->xmit.buf, UART_XMIT_SIZE,
+				      DMA_TO_DEVICE);
+	if (dma_mapping_error(dma->tx_chan->device->dev, dma->tx_addr)) {
+		reason = "DMA mapping error for TX buffer";
+		ret = -EIO;
+		goto err_unmap_rx;
+	}
+
+	return 0;
+
+err_unmap_rx:
+	dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
+			 dma->rx_size, DMA_FROM_DEVICE);
+err_free_rx:
+	kfree(dma->rx_buf);
+err_release_tx:
+	dma_release_channel(dma->tx_chan);
+err_release_rx:
+	dma_release_channel(dma->rx_chan);
+err_warn:
+	if (reason)
+		dev_warn(p->port.dev, "%s, DMA will not be used\n", reason);
+	return ret;
+}
+
+static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
+{
+	struct s3c24xx_uart_dma	*dma = p->dma;
+
+	if (dma->rx_chan) {
+		dmaengine_terminate_all(dma->rx_chan);
+		dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
+				 dma->rx_size, DMA_FROM_DEVICE);
+		kfree(dma->rx_buf);
+		dma_release_channel(dma->rx_chan);
+		dma->rx_chan = NULL;
+	}
+
+	if (dma->tx_chan) {
+		dmaengine_terminate_all(dma->tx_chan);
+		dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
+				 UART_XMIT_SIZE, DMA_TO_DEVICE);
+		dma_release_channel(dma->tx_chan);
+		dma->tx_chan = NULL;
+	}
+}
+
+static void s3c24xx_serial_shutdown(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	if (ourport->tx_claimed) {
+		free_irq(ourport->tx_irq, ourport);
+		ourport->tx_enabled = 0;
+		ourport->tx_claimed = 0;
+		ourport->tx_mode = 0;
+	}
+
+	if (ourport->rx_claimed) {
+		free_irq(ourport->rx_irq, ourport);
+		ourport->rx_claimed = 0;
+		ourport->rx_enabled = 0;
+	}
+
+	if (ourport->dma)
+		s3c24xx_serial_release_dma(ourport);
+
+	ourport->tx_in_progress = 0;
+}
+
+static void s3c64xx_serial_shutdown(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	ourport->tx_enabled = 0;
+	ourport->tx_mode = 0;
+	ourport->rx_enabled = 0;
+
+	free_irq(port->irq, ourport);
+
+	wr_regl(port, S3C64XX_UINTP, 0xf);
+	wr_regl(port, S3C64XX_UINTM, 0xf);
+
+	if (ourport->dma)
+		s3c24xx_serial_release_dma(ourport);
+
+	ourport->tx_in_progress = 0;
+}
+
+static void apple_s5l_serial_shutdown(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	unsigned int ucon;
+
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
+		  APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
+		  APPLE_S5L_UCON_RXTO_ENA_MSK);
+	wr_regl(port, S3C2410_UCON, ucon);
+
+	wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
+
+	free_irq(port->irq, ourport);
+
+	ourport->tx_enabled = 0;
+	ourport->tx_mode = 0;
+	ourport->rx_enabled = 0;
+
+	if (ourport->dma)
+		s3c24xx_serial_release_dma(ourport);
+
+	ourport->tx_in_progress = 0;
+}
+
+static int s3c24xx_serial_startup(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	int ret;
+
+	ourport->rx_enabled = 1;
+
+	ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_irq, 0,
+			  s3c24xx_serial_portname(port), ourport);
+
+	if (ret != 0) {
+		dev_err(port->dev, "cannot get irq %d\n", ourport->rx_irq);
+		return ret;
+	}
+
+	ourport->rx_claimed = 1;
+
+	dev_dbg(port->dev, "requesting tx irq...\n");
+
+	ourport->tx_enabled = 1;
+
+	ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_irq, 0,
+			  s3c24xx_serial_portname(port), ourport);
+
+	if (ret) {
+		dev_err(port->dev, "cannot get irq %d\n", ourport->tx_irq);
+		goto err;
+	}
+
+	ourport->tx_claimed = 1;
+
+	/* the port reset code should have done the correct
+	 * register setup for the port controls
+	 */
+
+	return ret;
+
+err:
+	s3c24xx_serial_shutdown(port);
+	return ret;
+}
+
+static int s3c64xx_serial_startup(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	unsigned long flags;
+	unsigned int ufcon;
+	int ret;
+
+	wr_regl(port, S3C64XX_UINTM, 0xf);
+	if (ourport->dma) {
+		ret = s3c24xx_serial_request_dma(ourport);
+		if (ret < 0) {
+			devm_kfree(port->dev, ourport->dma);
+			ourport->dma = NULL;
+		}
+	}
+
+	ret = request_irq(port->irq, s3c64xx_serial_handle_irq, IRQF_SHARED,
+			  s3c24xx_serial_portname(port), ourport);
+	if (ret) {
+		dev_err(port->dev, "cannot get irq %d\n", port->irq);
+		return ret;
+	}
+
+	/* For compatibility with s3c24xx Soc's */
+	ourport->rx_enabled = 1;
+	ourport->tx_enabled = 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	ufcon = rd_regl(port, S3C2410_UFCON);
+	ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
+	if (!uart_console(port))
+		ufcon |= S3C2410_UFCON_RESETTX;
+	wr_regl(port, S3C2410_UFCON, ufcon);
+
+	enable_rx_pio(ourport);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Enable Rx Interrupt */
+	s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM);
+
+	return ret;
+}
+
+static int apple_s5l_serial_startup(struct uart_port *port)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	unsigned long flags;
+	unsigned int ufcon;
+	int ret;
+
+	wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
+
+	ret = request_irq(port->irq, apple_serial_handle_irq, 0,
+			  s3c24xx_serial_portname(port), ourport);
+	if (ret) {
+		dev_err(port->dev, "cannot get irq %d\n", port->irq);
+		return ret;
+	}
+
+	/* For compatibility with s3c24xx Soc's */
+	ourport->rx_enabled = 1;
+	ourport->tx_enabled = 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	ufcon = rd_regl(port, S3C2410_UFCON);
+	ufcon |= S3C2410_UFCON_RESETRX | S5PV210_UFCON_RXTRIG8;
+	if (!uart_console(port))
+		ufcon |= S3C2410_UFCON_RESETTX;
+	wr_regl(port, S3C2410_UFCON, ufcon);
+
+	enable_rx_pio(ourport);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Enable Rx Interrupt */
+	s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTHRESH_ENA, S3C2410_UCON);
+	s3c24xx_set_bit(port, APPLE_S5L_UCON_RXTO_ENA, S3C2410_UCON);
+
+	return ret;
+}
+
+/* power power management control */
+
+static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
+			      unsigned int old)
+{
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	int timeout = 10000;
+
+	ourport->pm_level = level;
+
+	switch (level) {
+	case 3:
+		while (--timeout && !s3c24xx_serial_txempty_nofifo(port))
+			udelay(100);
+
+		if (!IS_ERR(ourport->baudclk))
+			clk_disable_unprepare(ourport->baudclk);
+
+		clk_disable_unprepare(ourport->clk);
+		break;
+
+	case 0:
+		clk_prepare_enable(ourport->clk);
+
+		if (!IS_ERR(ourport->baudclk))
+			clk_prepare_enable(ourport->baudclk);
+		break;
+	default:
+		dev_err(port->dev, "s3c24xx_serial: unknown pm %d\n", level);
+	}
+}
+
+/* baud rate calculation
+ *
+ * The UARTs on the S3C2410/S3C2440 can take their clocks from a number
+ * of different sources, including the peripheral clock ("pclk") and an
+ * external clock ("uclk"). The S3C2440 also adds the core clock ("fclk")
+ * with a programmable extra divisor.
+ *
+ * The following code goes through the clock sources, and calculates the
+ * baud clocks (and the resultant actual baud rates) and then tries to
+ * pick the closest one and select that.
+ *
+ */
+
+#define MAX_CLK_NAME_LENGTH 15
+
+static inline int s3c24xx_serial_getsource(struct uart_port *port)
+{
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned int ucon;
+
+	if (info->num_clks == 1)
+		return 0;
+
+	ucon = rd_regl(port, S3C2410_UCON);
+	ucon &= info->clksel_mask;
+	return ucon >> info->clksel_shift;
+}
+
+static void s3c24xx_serial_setsource(struct uart_port *port,
+			unsigned int clk_sel)
+{
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned int ucon;
+
+	if (info->num_clks == 1)
+		return;
+
+	ucon = rd_regl(port, S3C2410_UCON);
+	if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
+		return;
+
+	ucon &= ~info->clksel_mask;
+	ucon |= clk_sel << info->clksel_shift;
+	wr_regl(port, S3C2410_UCON, ucon);
+}
+
+static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
+			unsigned int req_baud, struct clk **best_clk,
+			unsigned int *clk_num)
+{
+	const struct s3c24xx_uart_info *info = ourport->info;
+	struct clk *clk;
+	unsigned long rate;
+	unsigned int cnt, baud, quot, best_quot = 0;
+	char clkname[MAX_CLK_NAME_LENGTH];
+	int calc_deviation, deviation = (1 << 30) - 1;
+
+	for (cnt = 0; cnt < info->num_clks; cnt++) {
+		/* Keep selected clock if provided */
+		if (ourport->cfg->clk_sel &&
+			!(ourport->cfg->clk_sel & (1 << cnt)))
+			continue;
+
+		sprintf(clkname, "clk_uart_baud%d", cnt);
+		clk = clk_get(ourport->port.dev, clkname);
+		if (IS_ERR(clk))
+			continue;
+
+		rate = clk_get_rate(clk);
+		if (!rate) {
+			dev_err(ourport->port.dev,
+				"Failed to get clock rate for %s.\n", clkname);
+			clk_put(clk);
+			continue;
+		}
+
+		if (ourport->info->has_divslot) {
+			unsigned long div = rate / req_baud;
+
+			/* The UDIVSLOT register on the newer UARTs allows us to
+			 * get a divisor adjustment of 1/16th on the baud clock.
+			 *
+			 * We don't keep the UDIVSLOT value (the 16ths we
+			 * calculated by not multiplying the baud by 16) as it
+			 * is easy enough to recalculate.
+			 */
+
+			quot = div / 16;
+			baud = rate / div;
+		} else {
+			quot = (rate + (8 * req_baud)) / (16 * req_baud);
+			baud = rate / (quot * 16);
+		}
+		quot--;
+
+		calc_deviation = req_baud - baud;
+		if (calc_deviation < 0)
+			calc_deviation = -calc_deviation;
+
+		if (calc_deviation < deviation) {
+			/*
+			 * If we find a better clk, release the previous one, if
+			 * any.
+			 */
+			if (!IS_ERR(*best_clk))
+				clk_put(*best_clk);
+			*best_clk = clk;
+			best_quot = quot;
+			*clk_num = cnt;
+			deviation = calc_deviation;
+		} else {
+			clk_put(clk);
+		}
+	}
+
+	return best_quot;
+}
+
+/* udivslot_table[]
+ *
+ * This table takes the fractional value of the baud divisor and gives
+ * the recommended setting for the UDIVSLOT register.
+ */
+static const u16 udivslot_table[16] = {
+	[0] = 0x0000,
+	[1] = 0x0080,
+	[2] = 0x0808,
+	[3] = 0x0888,
+	[4] = 0x2222,
+	[5] = 0x4924,
+	[6] = 0x4A52,
+	[7] = 0x54AA,
+	[8] = 0x5555,
+	[9] = 0xD555,
+	[10] = 0xD5D5,
+	[11] = 0xDDD5,
+	[12] = 0xDDDD,
+	[13] = 0xDFDD,
+	[14] = 0xDFDF,
+	[15] = 0xFFDF,
+};
+
+static void s3c24xx_serial_set_termios(struct uart_port *port,
+				       struct ktermios *termios,
+				       const struct ktermios *old)
+{
+	const struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+	struct clk *clk = ERR_PTR(-EINVAL);
+	unsigned long flags;
+	unsigned int baud, quot, clk_sel = 0;
+	unsigned int ulcon;
+	unsigned int umcon;
+	unsigned int udivslot = 0;
+
+	/*
+	 * We don't support modem control lines.
+	 */
+	termios->c_cflag &= ~(HUPCL | CMSPAR);
+	termios->c_cflag |= CLOCAL;
+
+	/*
+	 * Ask the core to calculate the divisor for us.
+	 */
+
+	baud = uart_get_baud_rate(port, termios, old, 0, 3000000);
+	quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
+	if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
+		quot = port->custom_divisor;
+	if (IS_ERR(clk))
+		return;
+
+	/* check to see if we need  to change clock source */
+
+	if (ourport->baudclk != clk) {
+		clk_prepare_enable(clk);
+
+		s3c24xx_serial_setsource(port, clk_sel);
+
+		if (!IS_ERR(ourport->baudclk)) {
+			clk_disable_unprepare(ourport->baudclk);
+			ourport->baudclk = ERR_PTR(-EINVAL);
+		}
+
+		ourport->baudclk = clk;
+		ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
+	}
+
+	if (ourport->info->has_divslot) {
+		unsigned int div = ourport->baudclk_rate / baud;
+
+		if (cfg->has_fracval) {
+			udivslot = (div & 15);
+			dev_dbg(port->dev, "fracval = %04x\n", udivslot);
+		} else {
+			udivslot = udivslot_table[div & 15];
+			dev_dbg(port->dev, "udivslot = %04x (div %d)\n",
+				udivslot, div & 15);
+		}
+	}
+
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		dev_dbg(port->dev, "config: 5bits/char\n");
+		ulcon = S3C2410_LCON_CS5;
+		break;
+	case CS6:
+		dev_dbg(port->dev, "config: 6bits/char\n");
+		ulcon = S3C2410_LCON_CS6;
+		break;
+	case CS7:
+		dev_dbg(port->dev, "config: 7bits/char\n");
+		ulcon = S3C2410_LCON_CS7;
+		break;
+	case CS8:
+	default:
+		dev_dbg(port->dev, "config: 8bits/char\n");
+		ulcon = S3C2410_LCON_CS8;
+		break;
+	}
+
+	/* preserve original lcon IR settings */
+	ulcon |= (cfg->ulcon & S3C2410_LCON_IRM);
+
+	if (termios->c_cflag & CSTOPB)
+		ulcon |= S3C2410_LCON_STOPB;
+
+	if (termios->c_cflag & PARENB) {
+		if (termios->c_cflag & PARODD)
+			ulcon |= S3C2410_LCON_PODD;
+		else
+			ulcon |= S3C2410_LCON_PEVEN;
+	} else {
+		ulcon |= S3C2410_LCON_PNONE;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	dev_dbg(port->dev,
+		"setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+		ulcon, quot, udivslot);
+
+	wr_regl(port, S3C2410_ULCON, ulcon);
+	wr_regl(port, S3C2410_UBRDIV, quot);
+
+	port->status &= ~UPSTAT_AUTOCTS;
+
+	umcon = rd_regl(port, S3C2410_UMCON);
+	if (termios->c_cflag & CRTSCTS) {
+		umcon |= S3C2410_UMCOM_AFC;
+		/* Disable RTS when RX FIFO contains 63 bytes */
+		umcon &= ~S3C2412_UMCON_AFC_8;
+		port->status = UPSTAT_AUTOCTS;
+	} else {
+		umcon &= ~S3C2410_UMCOM_AFC;
+	}
+	wr_regl(port, S3C2410_UMCON, umcon);
+
+	if (ourport->info->has_divslot)
+		wr_regl(port, S3C2443_DIVSLOT, udivslot);
+
+	dev_dbg(port->dev,
+		"uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
+		rd_regl(port, S3C2410_ULCON),
+		rd_regl(port, S3C2410_UCON),
+		rd_regl(port, S3C2410_UFCON));
+
+	/*
+	 * Update the per-port timeout.
+	 */
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	/*
+	 * Which character status flags are we interested in?
+	 */
+	port->read_status_mask = S3C2410_UERSTAT_OVERRUN;
+	if (termios->c_iflag & INPCK)
+		port->read_status_mask |= S3C2410_UERSTAT_FRAME |
+			S3C2410_UERSTAT_PARITY;
+	/*
+	 * Which character status flags should we ignore?
+	 */
+	port->ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= S3C2410_UERSTAT_OVERRUN;
+	if (termios->c_iflag & IGNBRK && termios->c_iflag & IGNPAR)
+		port->ignore_status_mask |= S3C2410_UERSTAT_FRAME;
+
+	/*
+	 * Ignore all characters if CREAD is not set.
+	 */
+	if ((termios->c_cflag & CREAD) == 0)
+		port->ignore_status_mask |= RXSTAT_DUMMY_READ;
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *s3c24xx_serial_type(struct uart_port *port)
+{
+	const struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	switch (ourport->info->type) {
+	case TYPE_S3C24XX:
+		return "S3C24XX";
+	case TYPE_S3C6400:
+		return "S3C6400/10";
+	case TYPE_APPLE_S5L:
+		return "APPLE S5L";
+	default:
+		return NULL;
+	}
+}
+
+static void s3c24xx_serial_config_port(struct uart_port *port, int flags)
+{
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+	if (flags & UART_CONFIG_TYPE)
+		port->type = info->port_type;
+}
+
+/*
+ * verify the new serial_struct (for TIOCSSERIAL).
+ */
+static int
+s3c24xx_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+
+	if (ser->type != PORT_UNKNOWN && ser->type != info->port_type)
+		return -EINVAL;
+
+	return 0;
+}
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+static struct console s3c24xx_serial_console;
+
+static void __init s3c24xx_serial_register_console(void)
+{
+	register_console(&s3c24xx_serial_console);
+}
+
+static void s3c24xx_serial_unregister_console(void)
+{
+	if (s3c24xx_serial_console.flags & CON_ENABLED)
+		unregister_console(&s3c24xx_serial_console);
+}
+
+#define S3C24XX_SERIAL_CONSOLE &s3c24xx_serial_console
+#else
+static inline void s3c24xx_serial_register_console(void) { }
+static inline void s3c24xx_serial_unregister_console(void) { }
+#define S3C24XX_SERIAL_CONSOLE NULL
+#endif
+
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
+static int s3c24xx_serial_get_poll_char(struct uart_port *port);
+static void s3c24xx_serial_put_poll_char(struct uart_port *port,
+			 unsigned char c);
+#endif
+
+static const struct uart_ops s3c24xx_serial_ops = {
+	.pm		= s3c24xx_serial_pm,
+	.tx_empty	= s3c24xx_serial_tx_empty,
+	.get_mctrl	= s3c24xx_serial_get_mctrl,
+	.set_mctrl	= s3c24xx_serial_set_mctrl,
+	.stop_tx	= s3c24xx_serial_stop_tx,
+	.start_tx	= s3c24xx_serial_start_tx,
+	.stop_rx	= s3c24xx_serial_stop_rx,
+	.break_ctl	= s3c24xx_serial_break_ctl,
+	.startup	= s3c24xx_serial_startup,
+	.shutdown	= s3c24xx_serial_shutdown,
+	.set_termios	= s3c24xx_serial_set_termios,
+	.type		= s3c24xx_serial_type,
+	.config_port	= s3c24xx_serial_config_port,
+	.verify_port	= s3c24xx_serial_verify_port,
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
+	.poll_get_char = s3c24xx_serial_get_poll_char,
+	.poll_put_char = s3c24xx_serial_put_poll_char,
+#endif
+};
+
+static const struct uart_ops s3c64xx_serial_ops = {
+	.pm		= s3c24xx_serial_pm,
+	.tx_empty	= s3c24xx_serial_tx_empty,
+	.get_mctrl	= s3c24xx_serial_get_mctrl,
+	.set_mctrl	= s3c24xx_serial_set_mctrl,
+	.stop_tx	= s3c24xx_serial_stop_tx,
+	.start_tx	= s3c24xx_serial_start_tx,
+	.stop_rx	= s3c24xx_serial_stop_rx,
+	.break_ctl	= s3c24xx_serial_break_ctl,
+	.startup	= s3c64xx_serial_startup,
+	.shutdown	= s3c64xx_serial_shutdown,
+	.set_termios	= s3c24xx_serial_set_termios,
+	.type		= s3c24xx_serial_type,
+	.config_port	= s3c24xx_serial_config_port,
+	.verify_port	= s3c24xx_serial_verify_port,
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
+	.poll_get_char = s3c24xx_serial_get_poll_char,
+	.poll_put_char = s3c24xx_serial_put_poll_char,
+#endif
+};
+
+static const struct uart_ops apple_s5l_serial_ops = {
+	.pm		= s3c24xx_serial_pm,
+	.tx_empty	= s3c24xx_serial_tx_empty,
+	.get_mctrl	= s3c24xx_serial_get_mctrl,
+	.set_mctrl	= s3c24xx_serial_set_mctrl,
+	.stop_tx	= s3c24xx_serial_stop_tx,
+	.start_tx	= s3c24xx_serial_start_tx,
+	.stop_rx	= s3c24xx_serial_stop_rx,
+	.break_ctl	= s3c24xx_serial_break_ctl,
+	.startup	= apple_s5l_serial_startup,
+	.shutdown	= apple_s5l_serial_shutdown,
+	.set_termios	= s3c24xx_serial_set_termios,
+	.type		= s3c24xx_serial_type,
+	.config_port	= s3c24xx_serial_config_port,
+	.verify_port	= s3c24xx_serial_verify_port,
+#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_CONSOLE_POLL)
+	.poll_get_char = s3c24xx_serial_get_poll_char,
+	.poll_put_char = s3c24xx_serial_put_poll_char,
+#endif
+};
+
+static struct uart_driver s3c24xx_uart_drv = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "s3c2410_serial",
+	.nr		= UART_NR,
+	.cons		= S3C24XX_SERIAL_CONSOLE,
+	.dev_name	= S3C24XX_SERIAL_NAME,
+	.major		= S3C24XX_SERIAL_MAJOR,
+	.minor		= S3C24XX_SERIAL_MINOR,
+};
+
+static struct s3c24xx_uart_port s3c24xx_serial_ports[UART_NR];
+
+static void s3c24xx_serial_init_port_default(int index) {
+	struct uart_port *port = &s3c24xx_serial_ports[index].port;
+
+	spin_lock_init(&port->lock);
+
+	port->iotype = UPIO_MEM;
+	port->uartclk = 0;
+	port->fifosize = 16;
+	port->ops = &s3c24xx_serial_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+	port->line = index;
+}
+
+/* s3c24xx_serial_resetport
+ *
+ * reset the fifos and other the settings.
+ */
+
+static void s3c24xx_serial_resetport(struct uart_port *port,
+				     const struct s3c2410_uartcfg *cfg)
+{
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned long ucon = rd_regl(port, S3C2410_UCON);
+
+	ucon &= (info->clksel_mask | info->ucon_mask);
+	wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+
+	/* reset both fifos */
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+	wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+	/* some delay is required after fifo reset */
+	udelay(1);
+}
+
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
+
+static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
+					     unsigned long val, void *data)
+{
+	struct s3c24xx_uart_port *port;
+	struct uart_port *uport;
+
+	port = container_of(nb, struct s3c24xx_uart_port, freq_transition);
+	uport = &port->port;
+
+	/* check to see if port is enabled */
+
+	if (port->pm_level != 0)
+		return 0;
+
+	/* try and work out if the baudrate is changing, we can detect
+	 * a change in rate, but we do not have support for detecting
+	 * a disturbance in the clock-rate over the change.
+	 */
+
+	if (IS_ERR(port->baudclk))
+		goto exit;
+
+	if (port->baudclk_rate == clk_get_rate(port->baudclk))
+		goto exit;
+
+	if (val == CPUFREQ_PRECHANGE) {
+		/* we should really shut the port down whilst the
+		 * frequency change is in progress.
+		 */
+
+	} else if (val == CPUFREQ_POSTCHANGE) {
+		struct ktermios *termios;
+		struct tty_struct *tty;
+
+		if (uport->state == NULL)
+			goto exit;
+
+		tty = uport->state->port.tty;
+
+		if (tty == NULL)
+			goto exit;
+
+		termios = &tty->termios;
+
+		if (termios == NULL) {
+			dev_warn(uport->dev, "%s: no termios?\n", __func__);
+			goto exit;
+		}
+
+		s3c24xx_serial_set_termios(uport, termios, NULL);
+	}
+
+exit:
+	return 0;
+}
+
+static inline int
+s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+	port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition;
+
+	return cpufreq_register_notifier(&port->freq_transition,
+					 CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void
+s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+	cpufreq_unregister_notifier(&port->freq_transition,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int
+s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port)
+{
+	return 0;
+}
+
+static inline void
+s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port)
+{
+}
+#endif
+
+static int s3c24xx_serial_enable_baudclk(struct s3c24xx_uart_port *ourport)
+{
+	struct device *dev = ourport->port.dev;
+	const struct s3c24xx_uart_info *info = ourport->info;
+	char clk_name[MAX_CLK_NAME_LENGTH];
+	unsigned int clk_sel;
+	struct clk *clk;
+	int clk_num;
+	int ret;
+
+	clk_sel = ourport->cfg->clk_sel ? : info->def_clk_sel;
+	for (clk_num = 0; clk_num < info->num_clks; clk_num++) {
+		if (!(clk_sel & (1 << clk_num)))
+			continue;
+
+		sprintf(clk_name, "clk_uart_baud%d", clk_num);
+		clk = clk_get(dev, clk_name);
+		if (IS_ERR(clk))
+			continue;
+
+		ret = clk_prepare_enable(clk);
+		if (ret) {
+			clk_put(clk);
+			continue;
+		}
+
+		ourport->baudclk = clk;
+		ourport->baudclk_rate = clk_get_rate(clk);
+		s3c24xx_serial_setsource(&ourport->port, clk_num);
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+/* s3c24xx_serial_init_port
+ *
+ * initialise a single serial port from the platform device given
+ */
+
+static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
+				    struct platform_device *platdev)
+{
+	struct uart_port *port = &ourport->port;
+	const struct s3c2410_uartcfg *cfg = ourport->cfg;
+	struct resource *res;
+	int ret;
+
+	if (platdev == NULL)
+		return -ENODEV;
+
+	if (port->mapbase != 0)
+		return -EINVAL;
+
+	/* setup info for port */
+	port->dev	= &platdev->dev;
+
+	port->uartclk = 1;
+
+	if (cfg->uart_flags & UPF_CONS_FLOW) {
+		dev_dbg(port->dev, "enabling flow control\n");
+		port->flags |= UPF_CONS_FLOW;
+	}
+
+	/* sort our the physical and virtual addresses for each UART */
+
+	res = platform_get_resource(platdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(port->dev, "failed to find memory resource for uart\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(port->dev, "resource %pR)\n", res);
+
+	port->membase = devm_ioremap_resource(port->dev, res);
+	if (IS_ERR(port->membase)) {
+		dev_err(port->dev, "failed to remap controller address\n");
+		return -EBUSY;
+	}
+
+	port->mapbase = res->start;
+	ret = platform_get_irq(platdev, 0);
+	if (ret < 0) {
+		port->irq = 0;
+	} else {
+		port->irq = ret;
+		ourport->rx_irq = ret;
+		ourport->tx_irq = ret + 1;
+	}
+
+	switch (ourport->info->type) {
+	case TYPE_S3C24XX:
+		ret = platform_get_irq(platdev, 1);
+		if (ret > 0)
+			ourport->tx_irq = ret;
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * DMA is currently supported only on DT platforms, if DMA properties
+	 * are specified.
+	 */
+	if (platdev->dev.of_node && of_find_property(platdev->dev.of_node,
+						     "dmas", NULL)) {
+		ourport->dma = devm_kzalloc(port->dev,
+					    sizeof(*ourport->dma),
+					    GFP_KERNEL);
+		if (!ourport->dma) {
+			ret = -ENOMEM;
+			goto err;
+		}
+	}
+
+	ourport->clk	= clk_get(&platdev->dev, "uart");
+	if (IS_ERR(ourport->clk)) {
+		pr_err("%s: Controller clock not found\n",
+				dev_name(&platdev->dev));
+		ret = PTR_ERR(ourport->clk);
+		goto err;
+	}
+
+	ret = clk_prepare_enable(ourport->clk);
+	if (ret) {
+		pr_err("uart: clock failed to prepare+enable: %d\n", ret);
+		clk_put(ourport->clk);
+		goto err;
+	}
+
+	ret = s3c24xx_serial_enable_baudclk(ourport);
+	if (ret)
+		pr_warn("uart: failed to enable baudclk\n");
+
+	/* Keep all interrupts masked and cleared */
+	switch (ourport->info->type) {
+	case TYPE_S3C6400:
+		wr_regl(port, S3C64XX_UINTM, 0xf);
+		wr_regl(port, S3C64XX_UINTP, 0xf);
+		wr_regl(port, S3C64XX_UINTSP, 0xf);
+		break;
+	case TYPE_APPLE_S5L: {
+		unsigned int ucon;
+
+		ucon = rd_regl(port, S3C2410_UCON);
+		ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
+			APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
+			APPLE_S5L_UCON_RXTO_ENA_MSK);
+		wr_regl(port, S3C2410_UCON, ucon);
+
+		wr_regl(port, S3C2410_UTRSTAT, APPLE_S5L_UTRSTAT_ALL_FLAGS);
+		break;
+	}
+	default:
+		break;
+	}
+
+	dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
+		&port->mapbase, port->membase, port->irq,
+		ourport->rx_irq, ourport->tx_irq, port->uartclk);
+
+	/* reset the fifos (and setup the uart) */
+	s3c24xx_serial_resetport(port, cfg);
+
+	return 0;
+
+err:
+	port->mapbase = 0;
+	return ret;
+}
+
+/* Device driver serial port probe */
+
+static int probe_index;
+
+static inline const struct s3c24xx_serial_drv_data *
+s3c24xx_get_driver_data(struct platform_device *pdev)
+{
+	if (dev_of_node(&pdev->dev))
+		return of_device_get_match_data(&pdev->dev);
+
+	return (struct s3c24xx_serial_drv_data *)
+			platform_get_device_id(pdev)->driver_data;
+}
+
+static int s3c24xx_serial_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct s3c24xx_uart_port *ourport;
+	int index = probe_index;
+	int ret, prop = 0;
+
+	if (np) {
+		ret = of_alias_get_id(np, "serial");
+		if (ret >= 0)
+			index = ret;
+	}
+
+	if (index >= ARRAY_SIZE(s3c24xx_serial_ports)) {
+		dev_err(&pdev->dev, "serial%d out of range\n", index);
+		return -EINVAL;
+	}
+	ourport = &s3c24xx_serial_ports[index];
+
+	s3c24xx_serial_init_port_default(index);
+
+	ourport->drv_data = s3c24xx_get_driver_data(pdev);
+	if (!ourport->drv_data) {
+		dev_err(&pdev->dev, "could not find driver data\n");
+		return -ENODEV;
+	}
+
+	ourport->baudclk = ERR_PTR(-EINVAL);
+	ourport->info = &ourport->drv_data->info;
+	ourport->cfg = (dev_get_platdata(&pdev->dev)) ?
+			dev_get_platdata(&pdev->dev) :
+			&ourport->drv_data->def_cfg;
+
+	switch (ourport->info->type) {
+	case TYPE_S3C24XX:
+		ourport->port.ops = &s3c24xx_serial_ops;
+		break;
+	case TYPE_S3C6400:
+		ourport->port.ops = &s3c64xx_serial_ops;
+		break;
+	case TYPE_APPLE_S5L:
+		ourport->port.ops = &apple_s5l_serial_ops;
+		break;
+	}
+
+	if (np) {
+		of_property_read_u32(np,
+			"samsung,uart-fifosize", &ourport->port.fifosize);
+
+		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+			switch (prop) {
+			case 1:
+				ourport->port.iotype = UPIO_MEM;
+				break;
+			case 4:
+				ourport->port.iotype = UPIO_MEM32;
+				break;
+			default:
+				dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
+						prop);
+				return -EINVAL;
+			}
+		}
+	}
+
+	if (ourport->drv_data->fifosize[index])
+		ourport->port.fifosize = ourport->drv_data->fifosize[index];
+	else if (ourport->info->fifosize)
+		ourport->port.fifosize = ourport->info->fifosize;
+	ourport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SAMSUNG_CONSOLE);
+
+	/*
+	 * DMA transfers must be aligned at least to cache line size,
+	 * so find minimal transfer size suitable for DMA mode
+	 */
+	ourport->min_dma_size = max_t(int, ourport->port.fifosize,
+				    dma_get_cache_alignment());
+
+	dev_dbg(&pdev->dev, "%s: initialising port %p...\n", __func__, ourport);
+
+	ret = s3c24xx_serial_init_port(ourport, pdev);
+	if (ret < 0)
+		return ret;
+
+	if (!s3c24xx_uart_drv.state) {
+		ret = uart_register_driver(&s3c24xx_uart_drv);
+		if (ret < 0) {
+			pr_err("Failed to register Samsung UART driver\n");
+			return ret;
+		}
+	}
+
+	dev_dbg(&pdev->dev, "%s: adding port\n", __func__);
+	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
+	platform_set_drvdata(pdev, &ourport->port);
+
+	/*
+	 * Deactivate the clock enabled in s3c24xx_serial_init_port here,
+	 * so that a potential re-enablement through the pm-callback overlaps
+	 * and keeps the clock enabled in this case.
+	 */
+	clk_disable_unprepare(ourport->clk);
+	if (!IS_ERR(ourport->baudclk))
+		clk_disable_unprepare(ourport->baudclk);
+
+	ret = s3c24xx_serial_cpufreq_register(ourport);
+	if (ret < 0)
+		dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
+
+	probe_index++;
+
+	return 0;
+}
+
+static int s3c24xx_serial_remove(struct platform_device *dev)
+{
+	struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
+
+	if (port) {
+		s3c24xx_serial_cpufreq_deregister(to_ourport(port));
+		uart_remove_one_port(&s3c24xx_uart_drv, port);
+	}
+
+	uart_unregister_driver(&s3c24xx_uart_drv);
+
+	return 0;
+}
+
+/* UART power management code */
+#ifdef CONFIG_PM_SLEEP
+static int s3c24xx_serial_suspend(struct device *dev)
+{
+	struct uart_port *port = s3c24xx_dev_to_port(dev);
+
+	if (port)
+		uart_suspend_port(&s3c24xx_uart_drv, port);
+
+	return 0;
+}
+
+static int s3c24xx_serial_resume(struct device *dev)
+{
+	struct uart_port *port = s3c24xx_dev_to_port(dev);
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	if (port) {
+		clk_prepare_enable(ourport->clk);
+		if (!IS_ERR(ourport->baudclk))
+			clk_prepare_enable(ourport->baudclk);
+		s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
+		if (!IS_ERR(ourport->baudclk))
+			clk_disable_unprepare(ourport->baudclk);
+		clk_disable_unprepare(ourport->clk);
+
+		uart_resume_port(&s3c24xx_uart_drv, port);
+	}
+
+	return 0;
+}
+
+static int s3c24xx_serial_resume_noirq(struct device *dev)
+{
+	struct uart_port *port = s3c24xx_dev_to_port(dev);
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
+
+	if (port) {
+		/* restore IRQ mask */
+		switch (ourport->info->type) {
+		case TYPE_S3C6400: {
+			unsigned int uintm = 0xf;
+
+			if (ourport->tx_enabled)
+				uintm &= ~S3C64XX_UINTM_TXD_MSK;
+			if (ourport->rx_enabled)
+				uintm &= ~S3C64XX_UINTM_RXD_MSK;
+			clk_prepare_enable(ourport->clk);
+			if (!IS_ERR(ourport->baudclk))
+				clk_prepare_enable(ourport->baudclk);
+			wr_regl(port, S3C64XX_UINTM, uintm);
+			if (!IS_ERR(ourport->baudclk))
+				clk_disable_unprepare(ourport->baudclk);
+			clk_disable_unprepare(ourport->clk);
+			break;
+		}
+		case TYPE_APPLE_S5L: {
+			unsigned int ucon;
+			int ret;
+
+			ret = clk_prepare_enable(ourport->clk);
+			if (ret) {
+				dev_err(dev, "clk_enable clk failed: %d\n", ret);
+				return ret;
+			}
+			if (!IS_ERR(ourport->baudclk)) {
+				ret = clk_prepare_enable(ourport->baudclk);
+				if (ret) {
+					dev_err(dev, "clk_enable baudclk failed: %d\n", ret);
+					clk_disable_unprepare(ourport->clk);
+					return ret;
+				}
+			}
+
+			ucon = rd_regl(port, S3C2410_UCON);
+
+			ucon &= ~(APPLE_S5L_UCON_TXTHRESH_ENA_MSK |
+				  APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
+				  APPLE_S5L_UCON_RXTO_ENA_MSK);
+
+			if (ourport->tx_enabled)
+				ucon |= APPLE_S5L_UCON_TXTHRESH_ENA_MSK;
+			if (ourport->rx_enabled)
+				ucon |= APPLE_S5L_UCON_RXTHRESH_ENA_MSK |
+					APPLE_S5L_UCON_RXTO_ENA_MSK;
+
+			wr_regl(port, S3C2410_UCON, ucon);
+
+			if (!IS_ERR(ourport->baudclk))
+				clk_disable_unprepare(ourport->baudclk);
+			clk_disable_unprepare(ourport->clk);
+			break;
+		}
+		default:
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops s3c24xx_serial_pm_ops = {
+	.suspend = s3c24xx_serial_suspend,
+	.resume = s3c24xx_serial_resume,
+	.resume_noirq = s3c24xx_serial_resume_noirq,
+};
+#define SERIAL_SAMSUNG_PM_OPS	(&s3c24xx_serial_pm_ops)
+
+#else /* !CONFIG_PM_SLEEP */
+
+#define SERIAL_SAMSUNG_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+/* Console code */
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+
+static struct uart_port *cons_uart;
+
+static int
+s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
+{
+	const struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+	unsigned long ufstat, utrstat;
+
+	if (ufcon & S3C2410_UFCON_FIFOMODE) {
+		/* fifo mode - check amount of data in fifo registers... */
+
+		ufstat = rd_regl(port, S3C2410_UFSTAT);
+		return (ufstat & info->tx_fifofull) ? 0 : 1;
+	}
+
+	/* in non-fifo mode, we go and use the tx buffer empty */
+
+	utrstat = rd_regl(port, S3C2410_UTRSTAT);
+	return (utrstat & S3C2410_UTRSTAT_TXE) ? 1 : 0;
+}
+
+static bool
+s3c24xx_port_configured(unsigned int ucon)
+{
+	/* consider the serial port configured if the tx/rx mode set */
+	return (ucon & 0xf) != 0;
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int s3c24xx_serial_get_poll_char(struct uart_port *port)
+{
+	const struct s3c24xx_uart_port *ourport = to_ourport(port);
+	unsigned int ufstat;
+
+	ufstat = rd_regl(port, S3C2410_UFSTAT);
+	if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
+		return NO_POLL_CHAR;
+
+	return rd_reg(port, S3C2410_URXH);
+}
+
+static void s3c24xx_serial_put_poll_char(struct uart_port *port,
+		unsigned char c)
+{
+	unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
+	unsigned int ucon = rd_regl(port, S3C2410_UCON);
+
+	/* not possible to xmit on unconfigured port */
+	if (!s3c24xx_port_configured(ucon))
+		return;
+
+	while (!s3c24xx_serial_console_txrdy(port, ufcon))
+		cpu_relax();
+	wr_reg(port, S3C2410_UTXH, c);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
+static void
+s3c24xx_serial_console_putchar(struct uart_port *port, unsigned char ch)
+{
+	unsigned int ufcon = rd_regl(port, S3C2410_UFCON);
+
+	while (!s3c24xx_serial_console_txrdy(port, ufcon))
+		cpu_relax();
+	wr_reg(port, S3C2410_UTXH, ch);
+}
+
+static void
+s3c24xx_serial_console_write(struct console *co, const char *s,
+			     unsigned int count)
+{
+	unsigned int ucon = rd_regl(cons_uart, S3C2410_UCON);
+	unsigned long flags;
+	bool locked = true;
+
+	/* not possible to xmit on unconfigured port */
+	if (!s3c24xx_port_configured(ucon))
+		return;
+
+	if (cons_uart->sysrq)
+		locked = false;
+	else if (oops_in_progress)
+		locked = spin_trylock_irqsave(&cons_uart->lock, flags);
+	else
+		spin_lock_irqsave(&cons_uart->lock, flags);
+
+	uart_console_write(cons_uart, s, count, s3c24xx_serial_console_putchar);
+
+	if (locked)
+		spin_unlock_irqrestore(&cons_uart->lock, flags);
+}
+
+/* Shouldn't be __init, as it can be instantiated from other module */
+static void
+s3c24xx_serial_get_options(struct uart_port *port, int *baud,
+			   int *parity, int *bits)
+{
+	struct clk *clk;
+	unsigned int ulcon;
+	unsigned int ucon;
+	unsigned int ubrdiv;
+	unsigned long rate;
+	unsigned int clk_sel;
+	char clk_name[MAX_CLK_NAME_LENGTH];
+
+	ulcon  = rd_regl(port, S3C2410_ULCON);
+	ucon   = rd_regl(port, S3C2410_UCON);
+	ubrdiv = rd_regl(port, S3C2410_UBRDIV);
+
+	if (s3c24xx_port_configured(ucon)) {
+		switch (ulcon & S3C2410_LCON_CSMASK) {
+		case S3C2410_LCON_CS5:
+			*bits = 5;
+			break;
+		case S3C2410_LCON_CS6:
+			*bits = 6;
+			break;
+		case S3C2410_LCON_CS7:
+			*bits = 7;
+			break;
+		case S3C2410_LCON_CS8:
+		default:
+			*bits = 8;
+			break;
+		}
+
+		switch (ulcon & S3C2410_LCON_PMASK) {
+		case S3C2410_LCON_PEVEN:
+			*parity = 'e';
+			break;
+
+		case S3C2410_LCON_PODD:
+			*parity = 'o';
+			break;
+
+		case S3C2410_LCON_PNONE:
+		default:
+			*parity = 'n';
+		}
+
+		/* now calculate the baud rate */
+
+		clk_sel = s3c24xx_serial_getsource(port);
+		sprintf(clk_name, "clk_uart_baud%d", clk_sel);
+
+		clk = clk_get(port->dev, clk_name);
+		if (!IS_ERR(clk))
+			rate = clk_get_rate(clk);
+		else
+			rate = 1;
+
+		*baud = rate / (16 * (ubrdiv + 1));
+		dev_dbg(port->dev, "calculated baud %d\n", *baud);
+	}
+}
+
+/* Shouldn't be __init, as it can be instantiated from other module */
+static int
+s3c24xx_serial_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	/* is this a valid port */
+
+	if (co->index == -1 || co->index >= UART_NR)
+		co->index = 0;
+
+	port = &s3c24xx_serial_ports[co->index].port;
+
+	/* is the port configured? */
+
+	if (port->mapbase == 0x0)
+		return -ENODEV;
+
+	cons_uart = port;
+
+	/*
+	 * Check whether an invalid uart number has been specified, and
+	 * if so, search for the first available port that does have
+	 * console support.
+	 */
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+	else
+		s3c24xx_serial_get_options(port, &baud, &parity, &bits);
+
+	dev_dbg(port->dev, "baud %d\n", baud);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct console s3c24xx_serial_console = {
+	.name		= S3C24XX_SERIAL_NAME,
+	.device		= uart_console_device,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.write		= s3c24xx_serial_console_write,
+	.setup		= s3c24xx_serial_console_setup,
+	.data		= &s3c24xx_uart_drv,
+};
+#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
+
+#ifdef CONFIG_CPU_S3C2410
+static const struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
+	.info = {
+		.name		= "Samsung S3C2410 UART",
+		.type		= TYPE_S3C24XX,
+		.port_type	= PORT_S3C2410,
+		.fifosize	= 16,
+		.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2410_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2410_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2410_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 2,
+		.clksel_mask	= S3C2410_UCON_CLKMASK,
+		.clksel_shift	= S3C2410_UCON_CLKSHIFT,
+	},
+	.def_cfg = {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C2410_SERIAL_DRV_DATA (&s3c2410_serial_drv_data)
+#else
+#define S3C2410_SERIAL_DRV_DATA NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static const struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
+	.info = {
+		.name		= "Samsung S3C2412 UART",
+		.type		= TYPE_S3C24XX,
+		.port_type	= PORT_S3C2412,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL2,
+		.num_clks	= 4,
+		.clksel_mask	= S3C2412_UCON_CLKMASK,
+		.clksel_shift	= S3C2412_UCON_CLKSHIFT,
+	},
+	.def_cfg = {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C2412_SERIAL_DRV_DATA (&s3c2412_serial_drv_data)
+#else
+#define S3C2412_SERIAL_DRV_DATA NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
+	defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2442)
+static const struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
+	.info = {
+		.name		= "Samsung S3C2440 UART",
+		.type		= TYPE_S3C24XX,
+		.port_type	= PORT_S3C2440,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL2,
+		.num_clks	= 4,
+		.clksel_mask	= S3C2412_UCON_CLKMASK,
+		.clksel_shift	= S3C2412_UCON_CLKSHIFT,
+		.ucon_mask	= S3C2440_UCON0_DIVMASK,
+	},
+	.def_cfg = {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C2440_SERIAL_DRV_DATA (&s3c2440_serial_drv_data)
+#else
+#define S3C2440_SERIAL_DRV_DATA NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+static const struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
+	.info = {
+		.name		= "Samsung S3C6400 UART",
+		.type		= TYPE_S3C6400,
+		.port_type	= PORT_S3C6400,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S3C2440_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2440_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2440_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2440_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2440_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2440_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL2,
+		.num_clks	= 4,
+		.clksel_mask	= S3C6400_UCON_CLKMASK,
+		.clksel_shift	= S3C6400_UCON_CLKSHIFT,
+	},
+	.def_cfg = {
+		.ucon		= S3C2410_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S3C6400_SERIAL_DRV_DATA (&s3c6400_serial_drv_data)
+#else
+#define S3C6400_SERIAL_DRV_DATA NULL
+#endif
+
+#ifdef CONFIG_CPU_S5PV210
+static const struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
+	.info = {
+		.name		= "Samsung S5PV210 UART",
+		.type		= TYPE_S3C6400,
+		.port_type	= PORT_S3C6400,
+		.has_divslot	= 1,
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 2,
+		.clksel_mask	= S5PV210_UCON_CLKMASK,
+		.clksel_shift	= S5PV210_UCON_CLKSHIFT,
+	},
+	.def_cfg = {
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+	},
+	.fifosize = { 256, 64, 16, 16 },
+};
+#define S5PV210_SERIAL_DRV_DATA (&s5pv210_serial_drv_data)
+#else
+#define S5PV210_SERIAL_DRV_DATA	NULL
+#endif
+
+#if defined(CONFIG_ARCH_EXYNOS)
+#define EXYNOS_COMMON_SERIAL_DRV_DATA()				\
+	.info = {						\
+		.name		= "Samsung Exynos UART",	\
+		.type		= TYPE_S3C6400,			\
+		.port_type	= PORT_S3C6400,			\
+		.has_divslot	= 1,				\
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,	\
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,	\
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,	\
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,	\
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,	\
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,	\
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,		\
+		.num_clks	= 1,				\
+		.clksel_mask	= 0,				\
+		.clksel_shift	= 0,				\
+	},							\
+	.def_cfg = {						\
+		.ucon		= S5PV210_UCON_DEFAULT,		\
+		.ufcon		= S5PV210_UFCON_DEFAULT,	\
+		.has_fracval	= 1,				\
+	}							\
+
+static const struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
+	EXYNOS_COMMON_SERIAL_DRV_DATA(),
+	.fifosize = { 256, 64, 16, 16 },
+};
+
+static const struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
+	EXYNOS_COMMON_SERIAL_DRV_DATA(),
+	.fifosize = { 64, 256, 16, 256 },
+};
+
+static const struct s3c24xx_serial_drv_data exynos850_serial_drv_data = {
+	EXYNOS_COMMON_SERIAL_DRV_DATA(),
+	.fifosize = { 256, 64, 64, 64 },
+};
+
+#define EXYNOS4210_SERIAL_DRV_DATA (&exynos4210_serial_drv_data)
+#define EXYNOS5433_SERIAL_DRV_DATA (&exynos5433_serial_drv_data)
+#define EXYNOS850_SERIAL_DRV_DATA (&exynos850_serial_drv_data)
+
+#else
+#define EXYNOS4210_SERIAL_DRV_DATA NULL
+#define EXYNOS5433_SERIAL_DRV_DATA NULL
+#define EXYNOS850_SERIAL_DRV_DATA NULL
+#endif
+
+#ifdef CONFIG_ARCH_APPLE
+static const struct s3c24xx_serial_drv_data s5l_serial_drv_data = {
+	.info = {
+		.name		= "Apple S5L UART",
+		.type		= TYPE_APPLE_S5L,
+		.port_type	= PORT_8250,
+		.fifosize	= 16,
+		.rx_fifomask	= S3C2410_UFSTAT_RXMASK,
+		.rx_fifoshift	= S3C2410_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S3C2410_UFSTAT_RXFULL,
+		.tx_fifofull	= S3C2410_UFSTAT_TXFULL,
+		.tx_fifomask	= S3C2410_UFSTAT_TXMASK,
+		.tx_fifoshift	= S3C2410_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 1,
+		.clksel_mask	= 0,
+		.clksel_shift	= 0,
+		.ucon_mask	= APPLE_S5L_UCON_MASK,
+	},
+	.def_cfg = {
+		.ucon		= APPLE_S5L_UCON_DEFAULT,
+		.ufcon		= S3C2410_UFCON_DEFAULT,
+	},
+};
+#define S5L_SERIAL_DRV_DATA (&s5l_serial_drv_data)
+#else
+#define S5L_SERIAL_DRV_DATA NULL
+#endif
+
+#if defined(CONFIG_ARCH_ARTPEC)
+static const struct s3c24xx_serial_drv_data artpec8_serial_drv_data = {
+	.info = {
+		.name		= "Axis ARTPEC-8 UART",
+		.type		= TYPE_S3C6400,
+		.port_type	= PORT_S3C6400,
+		.fifosize	= 64,
+		.has_divslot	= 1,
+		.rx_fifomask	= S5PV210_UFSTAT_RXMASK,
+		.rx_fifoshift	= S5PV210_UFSTAT_RXSHIFT,
+		.rx_fifofull	= S5PV210_UFSTAT_RXFULL,
+		.tx_fifofull	= S5PV210_UFSTAT_TXFULL,
+		.tx_fifomask	= S5PV210_UFSTAT_TXMASK,
+		.tx_fifoshift	= S5PV210_UFSTAT_TXSHIFT,
+		.def_clk_sel	= S3C2410_UCON_CLKSEL0,
+		.num_clks	= 1,
+		.clksel_mask	= 0,
+		.clksel_shift	= 0,
+	},
+	.def_cfg = {
+		.ucon		= S5PV210_UCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.has_fracval	= 1,
+	}
+};
+#define ARTPEC8_SERIAL_DRV_DATA (&artpec8_serial_drv_data)
+#else
+#define ARTPEC8_SERIAL_DRV_DATA (NULL)
+#endif
+
+static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
+	{
+		.name		= "s3c2410-uart",
+		.driver_data	= (kernel_ulong_t)S3C2410_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s3c2412-uart",
+		.driver_data	= (kernel_ulong_t)S3C2412_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s3c2440-uart",
+		.driver_data	= (kernel_ulong_t)S3C2440_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s3c6400-uart",
+		.driver_data	= (kernel_ulong_t)S3C6400_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s5pv210-uart",
+		.driver_data	= (kernel_ulong_t)S5PV210_SERIAL_DRV_DATA,
+	}, {
+		.name		= "exynos4210-uart",
+		.driver_data	= (kernel_ulong_t)EXYNOS4210_SERIAL_DRV_DATA,
+	}, {
+		.name		= "exynos5433-uart",
+		.driver_data	= (kernel_ulong_t)EXYNOS5433_SERIAL_DRV_DATA,
+	}, {
+		.name		= "s5l-uart",
+		.driver_data	= (kernel_ulong_t)S5L_SERIAL_DRV_DATA,
+	}, {
+		.name		= "exynos850-uart",
+		.driver_data	= (kernel_ulong_t)EXYNOS850_SERIAL_DRV_DATA,
+	}, {
+		.name		= "artpec8-uart",
+		.driver_data	= (kernel_ulong_t)ARTPEC8_SERIAL_DRV_DATA,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_uart_dt_match[] = {
+	{ .compatible = "samsung,s3c2410-uart",
+		.data = S3C2410_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,s3c2412-uart",
+		.data = S3C2412_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,s3c2440-uart",
+		.data = S3C2440_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,s3c6400-uart",
+		.data = S3C6400_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,s5pv210-uart",
+		.data = S5PV210_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,exynos4210-uart",
+		.data = EXYNOS4210_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,exynos5433-uart",
+		.data = EXYNOS5433_SERIAL_DRV_DATA },
+	{ .compatible = "apple,s5l-uart",
+		.data = S5L_SERIAL_DRV_DATA },
+	{ .compatible = "samsung,exynos850-uart",
+		.data = EXYNOS850_SERIAL_DRV_DATA },
+	{ .compatible = "axis,artpec8-uart",
+		.data = ARTPEC8_SERIAL_DRV_DATA },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
+#endif
+
+static struct platform_driver samsung_serial_driver = {
+	.probe		= s3c24xx_serial_probe,
+	.remove		= s3c24xx_serial_remove,
+	.id_table	= s3c24xx_serial_driver_ids,
+	.driver		= {
+		.name	= "samsung-uart",
+		.pm	= SERIAL_SAMSUNG_PM_OPS,
+		.of_match_table	= of_match_ptr(s3c24xx_uart_dt_match),
+	},
+};
+
+static int __init samsung_serial_init(void)
+{
+	int ret;
+
+	s3c24xx_serial_register_console();
+
+	ret = platform_driver_register(&samsung_serial_driver);
+	if (ret) {
+		s3c24xx_serial_unregister_console();
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit samsung_serial_exit(void)
+{
+	platform_driver_unregister(&samsung_serial_driver);
+	s3c24xx_serial_unregister_console();
+}
+
+module_init(samsung_serial_init);
+module_exit(samsung_serial_exit);
+
+#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
+/*
+ * Early console.
+ */
+
+static void wr_reg_barrier(const struct uart_port *port, u32 reg, u32 val)
+{
+	switch (port->iotype) {
+	case UPIO_MEM:
+		writeb(val, portaddr(port, reg));
+		break;
+	case UPIO_MEM32:
+		writel(val, portaddr(port, reg));
+		break;
+	}
+}
+
+struct samsung_early_console_data {
+	u32 txfull_mask;
+	u32 rxfifo_mask;
+};
+
+static void samsung_early_busyuart(const struct uart_port *port)
+{
+	while (!(readl(port->membase + S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXFE))
+		;
+}
+
+static void samsung_early_busyuart_fifo(const struct uart_port *port)
+{
+	const struct samsung_early_console_data *data = port->private_data;
+
+	while (readl(port->membase + S3C2410_UFSTAT) & data->txfull_mask)
+		;
+}
+
+static void samsung_early_putc(struct uart_port *port, unsigned char c)
+{
+	if (readl(port->membase + S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE)
+		samsung_early_busyuart_fifo(port);
+	else
+		samsung_early_busyuart(port);
+
+	wr_reg_barrier(port, S3C2410_UTXH, c);
+}
+
+static void samsung_early_write(struct console *con, const char *s,
+				unsigned int n)
+{
+	struct earlycon_device *dev = con->data;
+
+	uart_console_write(&dev->port, s, n, samsung_early_putc);
+}
+
+static int samsung_early_read(struct console *con, char *s, unsigned int n)
+{
+	struct earlycon_device *dev = con->data;
+	const struct samsung_early_console_data *data = dev->port.private_data;
+	int ch, ufstat, num_read = 0;
+
+	while (num_read < n) {
+		ufstat = rd_regl(&dev->port, S3C2410_UFSTAT);
+		if (!(ufstat & data->rxfifo_mask))
+			break;
+		ch = rd_reg(&dev->port, S3C2410_URXH);
+		if (ch == NO_POLL_CHAR)
+			break;
+
+		s[num_read++] = ch;
+	}
+
+	return num_read;
+}
+
+static int __init samsung_early_console_setup(struct earlycon_device *device,
+					      const char *opt)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = samsung_early_write;
+	device->con->read = samsung_early_read;
+	return 0;
+}
+
+/* S3C2410 */
+static struct samsung_early_console_data s3c2410_early_console_data = {
+	.txfull_mask = S3C2410_UFSTAT_TXFULL,
+	.rxfifo_mask = S3C2410_UFSTAT_RXFULL | S3C2410_UFSTAT_RXMASK,
+};
+
+static int __init s3c2410_early_console_setup(struct earlycon_device *device,
+					      const char *opt)
+{
+	device->port.private_data = &s3c2410_early_console_data;
+	return samsung_early_console_setup(device, opt);
+}
+
+OF_EARLYCON_DECLARE(s3c2410, "samsung,s3c2410-uart",
+			s3c2410_early_console_setup);
+
+/* S3C2412, S3C2440, S3C64xx */
+static struct samsung_early_console_data s3c2440_early_console_data = {
+	.txfull_mask = S3C2440_UFSTAT_TXFULL,
+	.rxfifo_mask = S3C2440_UFSTAT_RXFULL | S3C2440_UFSTAT_RXMASK,
+};
+
+static int __init s3c2440_early_console_setup(struct earlycon_device *device,
+					      const char *opt)
+{
+	device->port.private_data = &s3c2440_early_console_data;
+	return samsung_early_console_setup(device, opt);
+}
+
+OF_EARLYCON_DECLARE(s3c2412, "samsung,s3c2412-uart",
+			s3c2440_early_console_setup);
+OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
+			s3c2440_early_console_setup);
+OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
+			s3c2440_early_console_setup);
+
+/* S5PV210, Exynos */
+static struct samsung_early_console_data s5pv210_early_console_data = {
+	.txfull_mask = S5PV210_UFSTAT_TXFULL,
+	.rxfifo_mask = S5PV210_UFSTAT_RXFULL | S5PV210_UFSTAT_RXMASK,
+};
+
+static int __init s5pv210_early_console_setup(struct earlycon_device *device,
+					      const char *opt)
+{
+	device->port.private_data = &s5pv210_early_console_data;
+	return samsung_early_console_setup(device, opt);
+}
+
+OF_EARLYCON_DECLARE(s5pv210, "samsung,s5pv210-uart",
+			s5pv210_early_console_setup);
+OF_EARLYCON_DECLARE(exynos4210, "samsung,exynos4210-uart",
+			s5pv210_early_console_setup);
+OF_EARLYCON_DECLARE(artpec8, "axis,artpec8-uart",
+			s5pv210_early_console_setup);
+
+/* Apple S5L */
+static int __init apple_s5l_early_console_setup(struct earlycon_device *device,
+						const char *opt)
+{
+	/* Close enough to S3C2410 for earlycon... */
+	device->port.private_data = &s3c2410_early_console_data;
+
+#ifdef CONFIG_ARM64
+	/* ... but we need to override the existing fixmap entry as nGnRnE */
+	__set_fixmap(FIX_EARLYCON_MEM_BASE, device->port.mapbase,
+		     __pgprot(PROT_DEVICE_nGnRnE));
+#endif
+	return samsung_early_console_setup(device, opt);
+}
+
+OF_EARLYCON_DECLARE(s5l, "apple,s5l-uart", apple_s5l_early_console_setup);
+#endif
+
+MODULE_ALIAS("platform:samsung-uart");
+MODULE_DESCRIPTION("Samsung SoC Serial port driver");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");