Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 865 insertions, 0 deletions

diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
new file mode 100644
index 000000000..158ede753
--- /dev/null
+++ b/drivers/usb/dwc2/core_intr.c
@@ -0,0 +1,865 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * core_intr.c - DesignWare HS OTG Controller common interrupt handling
+ *
+ * Copyright (C) 2004-2013 Synopsys, Inc.
+ */
+
+/*
+ * This file contains the common interrupt handlers
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+
+#include <linux/usb/hcd.h>
+#include <linux/usb/ch11.h>
+
+#include "core.h"
+#include "hcd.h"
+
+static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
+{
+	switch (hsotg->op_state) {
+	case OTG_STATE_A_HOST:
+		return "a_host";
+	case OTG_STATE_A_SUSPEND:
+		return "a_suspend";
+	case OTG_STATE_A_PERIPHERAL:
+		return "a_peripheral";
+	case OTG_STATE_B_PERIPHERAL:
+		return "b_peripheral";
+	case OTG_STATE_B_HOST:
+		return "b_host";
+	default:
+		return "unknown";
+	}
+}
+
+/**
+ * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts.
+ * When the PRTINT interrupt fires, there are certain status bits in the Host
+ * Port that needs to get cleared.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 hprt0 = dwc2_readl(hsotg, HPRT0);
+
+	if (hprt0 & HPRT0_ENACHG) {
+		hprt0 &= ~HPRT0_ENA;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+	}
+}
+
+/**
+ * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
+{
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_MODEMIS, GINTSTS);
+
+	dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
+		 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
+}
+
+/**
+ * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG
+ * Interrupt Register (GOTGINT) to determine what interrupt has occurred.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ */
+static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gotgint;
+	u32 gotgctl;
+	u32 gintmsk;
+
+	gotgint = dwc2_readl(hsotg, GOTGINT);
+	gotgctl = dwc2_readl(hsotg, GOTGCTL);
+	dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
+		dwc2_op_state_str(hsotg));
+
+	if (gotgint & GOTGINT_SES_END_DET) {
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: Session End Detected++ (%s)\n",
+			dwc2_op_state_str(hsotg));
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+
+		if (dwc2_is_device_mode(hsotg))
+			dwc2_hsotg_disconnect(hsotg);
+
+		if (hsotg->op_state == OTG_STATE_B_HOST) {
+			hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+		} else {
+			/*
+			 * If not B_HOST and Device HNP still set, HNP did
+			 * not succeed!
+			 */
+			if (gotgctl & GOTGCTL_DEVHNPEN) {
+				dev_dbg(hsotg->dev, "Session End Detected\n");
+				dev_err(hsotg->dev,
+					"Device Not Connected/Responding!\n");
+			}
+
+			/*
+			 * If Session End Detected the B-Cable has been
+			 * disconnected
+			 */
+			/* Reset to a clean state */
+			hsotg->lx_state = DWC2_L0;
+		}
+
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		gotgctl &= ~GOTGCTL_DEVHNPEN;
+		dwc2_writel(hsotg, gotgctl, GOTGCTL);
+	}
+
+	if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: Session Request Success Status Change++\n");
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		if (gotgctl & GOTGCTL_SESREQSCS) {
+			if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
+			    hsotg->params.i2c_enable) {
+				hsotg->srp_success = 1;
+			} else {
+				/* Clear Session Request */
+				gotgctl = dwc2_readl(hsotg, GOTGCTL);
+				gotgctl &= ~GOTGCTL_SESREQ;
+				dwc2_writel(hsotg, gotgctl, GOTGCTL);
+			}
+		}
+	}
+
+	if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) {
+		/*
+		 * Print statements during the HNP interrupt handling
+		 * can cause it to fail
+		 */
+		gotgctl = dwc2_readl(hsotg, GOTGCTL);
+		/*
+		 * WA for 3.00a- HW is not setting cur_mode, even sometimes
+		 * this does not help
+		 */
+		if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a)
+			udelay(100);
+		if (gotgctl & GOTGCTL_HSTNEGSCS) {
+			if (dwc2_is_host_mode(hsotg)) {
+				hsotg->op_state = OTG_STATE_B_HOST;
+				/*
+				 * Need to disable SOF interrupt immediately.
+				 * When switching from device to host, the PCD
+				 * interrupt handler won't handle the interrupt
+				 * if host mode is already set. The HCD
+				 * interrupt handler won't get called if the
+				 * HCD state is HALT. This means that the
+				 * interrupt does not get handled and Linux
+				 * complains loudly.
+				 */
+				gintmsk = dwc2_readl(hsotg, GINTMSK);
+				gintmsk &= ~GINTSTS_SOF;
+				dwc2_writel(hsotg, gintmsk, GINTMSK);
+
+				/*
+				 * Call callback function with spin lock
+				 * released
+				 */
+				spin_unlock(&hsotg->lock);
+
+				/* Initialize the Core for Host mode */
+				dwc2_hcd_start(hsotg);
+				spin_lock(&hsotg->lock);
+				hsotg->op_state = OTG_STATE_B_HOST;
+			}
+		} else {
+			gotgctl = dwc2_readl(hsotg, GOTGCTL);
+			gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
+			dwc2_writel(hsotg, gotgctl, GOTGCTL);
+			dev_dbg(hsotg->dev, "HNP Failed\n");
+			dev_err(hsotg->dev,
+				"Device Not Connected/Responding\n");
+		}
+	}
+
+	if (gotgint & GOTGINT_HST_NEG_DET) {
+		/*
+		 * The disconnect interrupt is set at the same time as
+		 * Host Negotiation Detected. During the mode switch all
+		 * interrupts are cleared so the disconnect interrupt
+		 * handler will not get executed.
+		 */
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: Host Negotiation Detected++ (%s)\n",
+			(dwc2_is_host_mode(hsotg) ? "Host" : "Device"));
+		if (dwc2_is_device_mode(hsotg)) {
+			dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
+				hsotg->op_state);
+			spin_unlock(&hsotg->lock);
+			dwc2_hcd_disconnect(hsotg, false);
+			spin_lock(&hsotg->lock);
+			hsotg->op_state = OTG_STATE_A_PERIPHERAL;
+		} else {
+			/* Need to disable SOF interrupt immediately */
+			gintmsk = dwc2_readl(hsotg, GINTMSK);
+			gintmsk &= ~GINTSTS_SOF;
+			dwc2_writel(hsotg, gintmsk, GINTMSK);
+			spin_unlock(&hsotg->lock);
+			dwc2_hcd_start(hsotg);
+			spin_lock(&hsotg->lock);
+			hsotg->op_state = OTG_STATE_A_HOST;
+		}
+	}
+
+	if (gotgint & GOTGINT_A_DEV_TOUT_CHG)
+		dev_dbg(hsotg->dev,
+			" ++OTG Interrupt: A-Device Timeout Change++\n");
+	if (gotgint & GOTGINT_DBNCE_DONE)
+		dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
+
+	/* Clear GOTGINT */
+	dwc2_writel(hsotg, gotgint, GOTGINT);
+}
+
+/**
+ * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status
+ * Change Interrupt
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a
+ * Device to Host Mode transition or a Host to Device Mode transition. This only
+ * occurs when the cable is connected/removed from the PHY connector.
+ */
+static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gintmsk;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_CONIDSTSCHNG, GINTSTS);
+
+	/* Need to disable SOF interrupt immediately */
+	gintmsk = dwc2_readl(hsotg, GINTMSK);
+	gintmsk &= ~GINTSTS_SOF;
+	dwc2_writel(hsotg, gintmsk, GINTMSK);
+
+	dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++  (%s)\n",
+		dwc2_is_host_mode(hsotg) ? "Host" : "Device");
+
+	/*
+	 * Need to schedule a work, as there are possible DELAY function calls.
+	 */
+	if (hsotg->wq_otg)
+		queue_work(hsotg->wq_otg, &hsotg->wf_otg);
+}
+
+/**
+ * dwc2_handle_session_req_intr() - This interrupt indicates that a device is
+ * initiating the Session Request Protocol to request the host to turn on bus
+ * power so a new session can begin
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ * This handler responds by turning on bus power. If the DWC_otg controller is
+ * in low power mode, this handler brings the controller out of low power mode
+ * before turning on bus power.
+ */
+static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
+{
+	int ret;
+	u32 hprt0;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_SESSREQINT, GINTSTS);
+
+	dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
+		hsotg->lx_state);
+
+	if (dwc2_is_device_mode(hsotg)) {
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
+				ret = dwc2_exit_partial_power_down(hsotg, 0,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit power_down failed\n");
+			}
+
+			/* Exit gadget mode clock gating. */
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_gadget_exit_clock_gating(hsotg, 0);
+		}
+
+		/*
+		 * Report disconnect if there is any previous session
+		 * established
+		 */
+		dwc2_hsotg_disconnect(hsotg);
+	} else {
+		/* Turn on the port power bit. */
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 |= HPRT0_PWR;
+		dwc2_writel(hsotg, hprt0, HPRT0);
+		/* Connect hcd after port power is set. */
+		dwc2_hcd_connect(hsotg);
+	}
+}
+
+/**
+ * dwc2_wakeup_from_lpm_l1 - Exit the device from LPM L1 state
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ */
+static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg)
+{
+	u32 glpmcfg;
+	u32 i = 0;
+
+	if (hsotg->lx_state != DWC2_L1) {
+		dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n");
+		return;
+	}
+
+	glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+	if (dwc2_is_device_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "Exit from L1 state\n");
+		glpmcfg &= ~GLPMCFG_ENBLSLPM;
+		glpmcfg &= ~GLPMCFG_HIRD_THRES_EN;
+		dwc2_writel(hsotg, glpmcfg, GLPMCFG);
+
+		do {
+			glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+
+			if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK |
+					 GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS)))
+				break;
+
+			udelay(1);
+		} while (++i < 200);
+
+		if (i == 200) {
+			dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n");
+			return;
+		}
+		dwc2_gadget_init_lpm(hsotg);
+	} else {
+		/* TODO */
+		dev_err(hsotg->dev, "Host side LPM is not supported.\n");
+		return;
+	}
+
+	/* Change to L0 state */
+	hsotg->lx_state = DWC2_L0;
+
+	/* Inform gadget to exit from L1 */
+	call_gadget(hsotg, resume);
+}
+
+/*
+ * This interrupt indicates that the DWC_otg controller has detected a
+ * resume or remote wakeup sequence. If the DWC_otg controller is in
+ * low power mode, the handler must brings the controller out of low
+ * power mode. The controller automatically begins resume signaling.
+ * The handler schedules a time to stop resume signaling.
+ */
+static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
+{
+	int ret;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_WKUPINT, GINTSTS);
+
+	dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
+	dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
+
+	if (hsotg->lx_state == DWC2_L1) {
+		dwc2_wakeup_from_lpm_l1(hsotg);
+		return;
+	}
+
+	if (dwc2_is_device_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
+			dwc2_readl(hsotg, DSTS));
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
+				u32 dctl = dwc2_readl(hsotg, DCTL);
+				/* Clear Remote Wakeup Signaling */
+				dctl &= ~DCTL_RMTWKUPSIG;
+				dwc2_writel(hsotg, dctl, DCTL);
+				ret = dwc2_exit_partial_power_down(hsotg, 1,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit partial_power_down failed\n");
+				call_gadget(hsotg, resume);
+			}
+
+			/* Exit gadget mode clock gating. */
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_gadget_exit_clock_gating(hsotg, 0);
+		} else {
+			/* Change to L0 state */
+			hsotg->lx_state = DWC2_L0;
+		}
+	} else {
+		if (hsotg->lx_state == DWC2_L2) {
+			if (hsotg->in_ppd) {
+				ret = dwc2_exit_partial_power_down(hsotg, 1,
+								   true);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit partial_power_down failed\n");
+			}
+
+			if (hsotg->params.power_down ==
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+				dwc2_host_exit_clock_gating(hsotg, 1);
+
+			/*
+			 * If we've got this quirk then the PHY is stuck upon
+			 * wakeup.  Assert reset.  This will propagate out and
+			 * eventually we'll re-enumerate the device.  Not great
+			 * but the best we can do.  We can't call phy_reset()
+			 * at interrupt time but there's no hurry, so we'll
+			 * schedule it for later.
+			 */
+			if (hsotg->reset_phy_on_wake)
+				dwc2_host_schedule_phy_reset(hsotg);
+
+			mod_timer(&hsotg->wkp_timer,
+				  jiffies + msecs_to_jiffies(71));
+		} else {
+			/* Change to L0 state */
+			hsotg->lx_state = DWC2_L0;
+		}
+	}
+}
+
+/*
+ * This interrupt indicates that a device has been disconnected from the
+ * root port
+ */
+static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
+{
+	dwc2_writel(hsotg, GINTSTS_DISCONNINT, GINTSTS);
+
+	dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
+		dwc2_is_host_mode(hsotg) ? "Host" : "Device",
+		dwc2_op_state_str(hsotg));
+
+	if (hsotg->op_state == OTG_STATE_A_HOST)
+		dwc2_hcd_disconnect(hsotg, false);
+}
+
+/*
+ * This interrupt indicates that SUSPEND state has been detected on the USB.
+ *
+ * For HNP the USB Suspend interrupt signals the change from "a_peripheral"
+ * to "a_host".
+ *
+ * When power management is enabled the core will be put in low power mode.
+ */
+static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 dsts;
+	int ret;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_USBSUSP, GINTSTS);
+
+	dev_dbg(hsotg->dev, "USB SUSPEND\n");
+
+	if (dwc2_is_device_mode(hsotg)) {
+		/*
+		 * Check the Device status register to determine if the Suspend
+		 * state is active
+		 */
+		dsts = dwc2_readl(hsotg, DSTS);
+		dev_dbg(hsotg->dev, "%s: DSTS=0x%0x\n", __func__, dsts);
+		dev_dbg(hsotg->dev,
+			"DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d HWCFG4.Hibernation=%d\n",
+			!!(dsts & DSTS_SUSPSTS),
+			hsotg->hw_params.power_optimized,
+			hsotg->hw_params.hibernation);
+
+		/* Ignore suspend request before enumeration */
+		if (!dwc2_is_device_connected(hsotg)) {
+			dev_dbg(hsotg->dev,
+				"ignore suspend request before enumeration\n");
+			return;
+		}
+		if (dsts & DSTS_SUSPSTS) {
+			switch (hsotg->params.power_down) {
+			case DWC2_POWER_DOWN_PARAM_PARTIAL:
+				ret = dwc2_enter_partial_power_down(hsotg);
+				if (ret)
+					dev_err(hsotg->dev,
+						"enter partial_power_down failed\n");
+
+				udelay(100);
+
+				/* Ask phy to be suspended */
+				if (!IS_ERR_OR_NULL(hsotg->uphy))
+					usb_phy_set_suspend(hsotg->uphy, true);
+				break;
+			case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+				ret = dwc2_enter_hibernation(hsotg, 0);
+				if (ret)
+					dev_err(hsotg->dev,
+						"enter hibernation failed\n");
+				break;
+			case DWC2_POWER_DOWN_PARAM_NONE:
+				/*
+				 * If neither hibernation nor partial power down are supported,
+				 * clock gating is used to save power.
+				 */
+				if (!hsotg->params.no_clock_gating)
+					dwc2_gadget_enter_clock_gating(hsotg);
+			}
+
+			/*
+			 * Change to L2 (suspend) state before releasing
+			 * spinlock
+			 */
+			hsotg->lx_state = DWC2_L2;
+
+			/* Call gadget suspend callback */
+			call_gadget(hsotg, suspend);
+		}
+	} else {
+		if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) {
+			dev_dbg(hsotg->dev, "a_peripheral->a_host\n");
+
+			/* Change to L2 (suspend) state */
+			hsotg->lx_state = DWC2_L2;
+			/* Clear the a_peripheral flag, back to a_host */
+			spin_unlock(&hsotg->lock);
+			dwc2_hcd_start(hsotg);
+			spin_lock(&hsotg->lock);
+			hsotg->op_state = OTG_STATE_A_HOST;
+		}
+	}
+}
+
+/**
+ * dwc2_handle_lpm_intr - GINTSTS_LPMTRANRCVD Interrupt handler
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ *
+ */
+static void dwc2_handle_lpm_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 glpmcfg;
+	u32 pcgcctl;
+	u32 hird;
+	u32 hird_thres;
+	u32 hird_thres_en;
+	u32 enslpm;
+
+	/* Clear interrupt */
+	dwc2_writel(hsotg, GINTSTS_LPMTRANRCVD, GINTSTS);
+
+	glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+
+	if (!(glpmcfg & GLPMCFG_LPMCAP)) {
+		dev_err(hsotg->dev, "Unexpected LPM interrupt\n");
+		return;
+	}
+
+	hird = (glpmcfg & GLPMCFG_HIRD_MASK) >> GLPMCFG_HIRD_SHIFT;
+	hird_thres = (glpmcfg & GLPMCFG_HIRD_THRES_MASK &
+			~GLPMCFG_HIRD_THRES_EN) >> GLPMCFG_HIRD_THRES_SHIFT;
+	hird_thres_en = glpmcfg & GLPMCFG_HIRD_THRES_EN;
+	enslpm = glpmcfg & GLPMCFG_ENBLSLPM;
+
+	if (dwc2_is_device_mode(hsotg)) {
+		dev_dbg(hsotg->dev, "HIRD_THRES_EN = %d\n", hird_thres_en);
+
+		if (hird_thres_en && hird >= hird_thres) {
+			dev_dbg(hsotg->dev, "L1 with utmi_l1_suspend_n\n");
+		} else if (enslpm) {
+			dev_dbg(hsotg->dev, "L1 with utmi_sleep_n\n");
+		} else {
+			dev_dbg(hsotg->dev, "Entering Sleep with L1 Gating\n");
+
+			pcgcctl = dwc2_readl(hsotg, PCGCTL);
+			pcgcctl |= PCGCTL_ENBL_SLEEP_GATING;
+			dwc2_writel(hsotg, pcgcctl, PCGCTL);
+		}
+		/**
+		 * Examine prt_sleep_sts after TL1TokenTetry period max (10 us)
+		 */
+		udelay(10);
+
+		glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+
+		if (glpmcfg & GLPMCFG_SLPSTS) {
+			/* Save the current state */
+			hsotg->lx_state = DWC2_L1;
+			dev_dbg(hsotg->dev,
+				"Core is in L1 sleep glpmcfg=%08x\n", glpmcfg);
+
+			/* Inform gadget that we are in L1 state */
+			call_gadget(hsotg, suspend);
+		}
+	}
+}
+
+#define GINTMSK_COMMON	(GINTSTS_WKUPINT | GINTSTS_SESSREQINT |		\
+			 GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT |	\
+			 GINTSTS_MODEMIS | GINTSTS_DISCONNINT |		\
+			 GINTSTS_USBSUSP | GINTSTS_PRTINT |		\
+			 GINTSTS_LPMTRANRCVD)
+
+/*
+ * This function returns the Core Interrupt register
+ */
+static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts;
+	u32 gintmsk;
+	u32 gahbcfg;
+	u32 gintmsk_common = GINTMSK_COMMON;
+
+	gintsts = dwc2_readl(hsotg, GINTSTS);
+	gintmsk = dwc2_readl(hsotg, GINTMSK);
+	gahbcfg = dwc2_readl(hsotg, GAHBCFG);
+
+	/* If any common interrupts set */
+	if (gintsts & gintmsk_common)
+		dev_dbg(hsotg->dev, "gintsts=%08x  gintmsk=%08x\n",
+			gintsts, gintmsk);
+
+	if (gahbcfg & GAHBCFG_GLBL_INTR_EN)
+		return gintsts & gintmsk & gintmsk_common;
+	else
+		return 0;
+}
+
+/**
+ * dwc_handle_gpwrdn_disc_det() - Handles the gpwrdn disconnect detect.
+ * Exits hibernation without restoring registers.
+ *
+ * @hsotg: Programming view of DWC_otg controller
+ * @gpwrdn: GPWRDN register
+ */
+static inline void dwc_handle_gpwrdn_disc_det(struct dwc2_hsotg *hsotg,
+					      u32 gpwrdn)
+{
+	u32 gpwrdn_tmp;
+
+	/* Switch-on voltage to the core */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PWRDNSWTCH;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Reset core */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PWRDNRSTN;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Disable Power Down Clamp */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PWRDNCLMP;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Deassert reset core */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp |= GPWRDN_PWRDNRSTN;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+	udelay(5);
+
+	/* Disable PMU interrupt */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PMUINTSEL;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+
+	/* De-assert Wakeup Logic */
+	gpwrdn_tmp = dwc2_readl(hsotg, GPWRDN);
+	gpwrdn_tmp &= ~GPWRDN_PMUACTV;
+	dwc2_writel(hsotg, gpwrdn_tmp, GPWRDN);
+
+	hsotg->hibernated = 0;
+	hsotg->bus_suspended = 0;
+
+	if (gpwrdn & GPWRDN_IDSTS) {
+		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		dwc2_hsotg_core_init_disconnected(hsotg, false);
+		dwc2_hsotg_core_connect(hsotg);
+	} else {
+		hsotg->op_state = OTG_STATE_A_HOST;
+
+		/* Initialize the Core for Host mode */
+		dwc2_core_init(hsotg, false);
+		dwc2_enable_global_interrupts(hsotg);
+		dwc2_hcd_start(hsotg);
+	}
+}
+
+/*
+ * GPWRDN interrupt handler.
+ *
+ * The GPWRDN interrupts are those that occur in both Host and
+ * Device mode while core is in hibernated state.
+ */
+static int dwc2_handle_gpwrdn_intr(struct dwc2_hsotg *hsotg)
+{
+	u32 gpwrdn;
+	int linestate;
+	int ret = 0;
+
+	gpwrdn = dwc2_readl(hsotg, GPWRDN);
+	/* clear all interrupt */
+	dwc2_writel(hsotg, gpwrdn, GPWRDN);
+	linestate = (gpwrdn & GPWRDN_LINESTATE_MASK) >> GPWRDN_LINESTATE_SHIFT;
+	dev_dbg(hsotg->dev,
+		"%s: dwc2_handle_gpwrdwn_intr called gpwrdn= %08x\n", __func__,
+		gpwrdn);
+
+	if ((gpwrdn & GPWRDN_DISCONN_DET) &&
+	    (gpwrdn & GPWRDN_DISCONN_DET_MSK) && !linestate) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_DISCONN_DET\n", __func__);
+		/*
+		 * Call disconnect detect function to exit from
+		 * hibernation
+		 */
+		dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
+	} else if ((gpwrdn & GPWRDN_LNSTSCHG) &&
+		   (gpwrdn & GPWRDN_LNSTSCHG_MSK) && linestate) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_LNSTSCHG\n", __func__);
+		if (hsotg->hw_params.hibernation &&
+		    hsotg->hibernated) {
+			if (gpwrdn & GPWRDN_IDSTS) {
+				ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit hibernation failed.\n");
+				call_gadget(hsotg, resume);
+			} else {
+				ret = dwc2_exit_hibernation(hsotg, 1, 0, 1);
+				if (ret)
+					dev_err(hsotg->dev,
+						"exit hibernation failed.\n");
+			}
+		}
+	} else if ((gpwrdn & GPWRDN_RST_DET) &&
+		   (gpwrdn & GPWRDN_RST_DET_MSK)) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_RST_DET\n", __func__);
+		if (!linestate) {
+			ret = dwc2_exit_hibernation(hsotg, 0, 1, 0);
+			if (ret)
+				dev_err(hsotg->dev,
+					"exit hibernation failed.\n");
+		}
+	} else if ((gpwrdn & GPWRDN_STS_CHGINT) &&
+		   (gpwrdn & GPWRDN_STS_CHGINT_MSK)) {
+		dev_dbg(hsotg->dev, "%s: GPWRDN_STS_CHGINT\n", __func__);
+		/*
+		 * As GPWRDN_STS_CHGINT exit from hibernation flow is
+		 * the same as in GPWRDN_DISCONN_DET flow. Call
+		 * disconnect detect helper function to exit from
+		 * hibernation.
+		 */
+		dwc_handle_gpwrdn_disc_det(hsotg, gpwrdn);
+	}
+
+	return ret;
+}
+
+/*
+ * Common interrupt handler
+ *
+ * The common interrupts are those that occur in both Host and Device mode.
+ * This handler handles the following interrupts:
+ * - Mode Mismatch Interrupt
+ * - OTG Interrupt
+ * - Connector ID Status Change Interrupt
+ * - Disconnect Interrupt
+ * - Session Request Interrupt
+ * - Resume / Remote Wakeup Detected Interrupt
+ * - Suspend Interrupt
+ */
+irqreturn_t dwc2_handle_common_intr(int irq, void *dev)
+{
+	struct dwc2_hsotg *hsotg = dev;
+	u32 gintsts;
+	irqreturn_t retval = IRQ_NONE;
+
+	spin_lock(&hsotg->lock);
+
+	if (!dwc2_is_controller_alive(hsotg)) {
+		dev_warn(hsotg->dev, "Controller is dead\n");
+		goto out;
+	}
+
+	/* Reading current frame number value in device or host modes. */
+	if (dwc2_is_device_mode(hsotg))
+		hsotg->frame_number = (dwc2_readl(hsotg, DSTS)
+				       & DSTS_SOFFN_MASK) >> DSTS_SOFFN_SHIFT;
+	else
+		hsotg->frame_number = (dwc2_readl(hsotg, HFNUM)
+				       & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT;
+
+	gintsts = dwc2_read_common_intr(hsotg);
+	if (gintsts & ~GINTSTS_PRTINT)
+		retval = IRQ_HANDLED;
+
+	/* In case of hibernated state gintsts must not work */
+	if (hsotg->hibernated) {
+		dwc2_handle_gpwrdn_intr(hsotg);
+		retval = IRQ_HANDLED;
+		goto out;
+	}
+
+	if (gintsts & GINTSTS_MODEMIS)
+		dwc2_handle_mode_mismatch_intr(hsotg);
+	if (gintsts & GINTSTS_OTGINT)
+		dwc2_handle_otg_intr(hsotg);
+	if (gintsts & GINTSTS_CONIDSTSCHNG)
+		dwc2_handle_conn_id_status_change_intr(hsotg);
+	if (gintsts & GINTSTS_DISCONNINT)
+		dwc2_handle_disconnect_intr(hsotg);
+	if (gintsts & GINTSTS_SESSREQINT)
+		dwc2_handle_session_req_intr(hsotg);
+	if (gintsts & GINTSTS_WKUPINT)
+		dwc2_handle_wakeup_detected_intr(hsotg);
+	if (gintsts & GINTSTS_USBSUSP)
+		dwc2_handle_usb_suspend_intr(hsotg);
+	if (gintsts & GINTSTS_LPMTRANRCVD)
+		dwc2_handle_lpm_intr(hsotg);
+
+	if (gintsts & GINTSTS_PRTINT) {
+		/*
+		 * The port interrupt occurs while in device mode with HPRT0
+		 * Port Enable/Disable
+		 */
+		if (dwc2_is_device_mode(hsotg)) {
+			dev_dbg(hsotg->dev,
+				" --Port interrupt received in Device mode--\n");
+			dwc2_handle_usb_port_intr(hsotg);
+			retval = IRQ_HANDLED;
+		}
+	}
+
+out:
+	spin_unlock(&hsotg->lock);
+	return retval;
+}