diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/dwc2/platform.c | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/dwc2/platform.c')
-rw-r--r-- | drivers/usb/dwc2/platform.c | 730 |
1 files changed, 730 insertions, 0 deletions
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c new file mode 100644 index 000000000..58f53faab --- /dev/null +++ b/drivers/usb/dwc2/platform.c @@ -0,0 +1,730 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * platform.c - DesignWare HS OTG Controller platform driver + * + * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/of_device.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/platform_data/s3c-hsotg.h> +#include <linux/reset.h> + +#include <linux/usb/of.h> + +#include "core.h" +#include "hcd.h" +#include "debug.h" + +static const char dwc2_driver_name[] = "dwc2"; + +/* + * Check the dr_mode against the module configuration and hardware + * capabilities. + * + * The hardware, module, and dr_mode, can each be set to host, device, + * or otg. Check that all these values are compatible and adjust the + * value of dr_mode if possible. + * + * actual + * HW MOD dr_mode dr_mode + * ------------------------------ + * HST HST any : HST + * HST DEV any : --- + * HST OTG any : HST + * + * DEV HST any : --- + * DEV DEV any : DEV + * DEV OTG any : DEV + * + * OTG HST any : HST + * OTG DEV any : DEV + * OTG OTG any : dr_mode + */ +static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg) +{ + enum usb_dr_mode mode; + + hsotg->dr_mode = usb_get_dr_mode(hsotg->dev); + if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN) + hsotg->dr_mode = USB_DR_MODE_OTG; + + mode = hsotg->dr_mode; + + if (dwc2_hw_is_device(hsotg)) { + if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) { + dev_err(hsotg->dev, + "Controller does not support host mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_PERIPHERAL; + } else if (dwc2_hw_is_host(hsotg)) { + if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) { + dev_err(hsotg->dev, + "Controller does not support device mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_HOST; + } else { + if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) + mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) + mode = USB_DR_MODE_PERIPHERAL; + } + + if (mode != hsotg->dr_mode) { + dev_warn(hsotg->dev, + "Configuration mismatch. dr_mode forced to %s\n", + mode == USB_DR_MODE_HOST ? "host" : "device"); + + hsotg->dr_mode = mode; + } + + return 0; +} + +static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) + return ret; + + if (hsotg->clk) { + ret = clk_prepare_enable(hsotg->clk); + if (ret) + return ret; + } + + if (hsotg->uphy) { + ret = usb_phy_init(hsotg->uphy); + } else if (hsotg->plat && hsotg->plat->phy_init) { + ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); + } else { + ret = phy_init(hsotg->phy); + if (ret == 0) + ret = phy_power_on(hsotg->phy); + } + + return ret; +} + +/** + * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources + * @hsotg: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB platform resources (phy, clock, regulators) + */ +int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) +{ + int ret = __dwc2_lowlevel_hw_enable(hsotg); + + if (ret == 0) + hsotg->ll_hw_enabled = true; + return ret; +} + +static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); + int ret = 0; + + if (hsotg->uphy) { + usb_phy_shutdown(hsotg->uphy); + } else if (hsotg->plat && hsotg->plat->phy_exit) { + ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); + } else { + ret = phy_power_off(hsotg->phy); + if (ret == 0) + ret = phy_exit(hsotg->phy); + } + if (ret) + return ret; + + if (hsotg->clk) + clk_disable_unprepare(hsotg->clk); + + return regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); +} + +/** + * dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources + * @hsotg: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB platform resources (phy, clock, regulators) + */ +int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg) +{ + int ret = __dwc2_lowlevel_hw_disable(hsotg); + + if (ret == 0) + hsotg->ll_hw_enabled = false; + return ret; +} + +static void dwc2_reset_control_assert(void *data) +{ + reset_control_assert(data); +} + +static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg) +{ + int i, ret; + + hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2"); + if (IS_ERR(hsotg->reset)) + return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset), + "error getting reset control\n"); + + reset_control_deassert(hsotg->reset); + ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert, + hsotg->reset); + if (ret) + return ret; + + hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc"); + if (IS_ERR(hsotg->reset_ecc)) + return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset_ecc), + "error getting reset control for ecc\n"); + + reset_control_deassert(hsotg->reset_ecc); + ret = devm_add_action_or_reset(hsotg->dev, dwc2_reset_control_assert, + hsotg->reset_ecc); + if (ret) + return ret; + + /* + * Attempt to find a generic PHY, then look for an old style + * USB PHY and then fall back to pdata + */ + hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy"); + if (IS_ERR(hsotg->phy)) { + ret = PTR_ERR(hsotg->phy); + switch (ret) { + case -ENODEV: + case -ENOSYS: + hsotg->phy = NULL; + break; + default: + return dev_err_probe(hsotg->dev, ret, "error getting phy\n"); + } + } + + if (!hsotg->phy) { + hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2); + if (IS_ERR(hsotg->uphy)) { + ret = PTR_ERR(hsotg->uphy); + switch (ret) { + case -ENODEV: + case -ENXIO: + hsotg->uphy = NULL; + break; + default: + return dev_err_probe(hsotg->dev, ret, "error getting usb phy\n"); + } + } + } + + hsotg->plat = dev_get_platdata(hsotg->dev); + + /* Clock */ + hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg"); + if (IS_ERR(hsotg->clk)) + return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->clk), "cannot get otg clock\n"); + + /* Regulators */ + for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) + hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i]; + + ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) + return dev_err_probe(hsotg->dev, ret, "failed to request supplies\n"); + + return 0; +} + +/** + * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the + * DWC_otg driver + * + * @dev: Platform device + * + * This routine is called, for example, when the rmmod command is executed. The + * device may or may not be electrically present. If it is present, the driver + * stops device processing. Any resources used on behalf of this device are + * freed. + */ +static int dwc2_driver_remove(struct platform_device *dev) +{ + struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); + struct dwc2_gregs_backup *gr; + int ret = 0; + + gr = &hsotg->gr_backup; + + /* Exit Hibernation when driver is removed. */ + if (hsotg->hibernated) { + if (gr->gotgctl & GOTGCTL_CURMODE_HOST) + ret = dwc2_exit_hibernation(hsotg, 0, 0, 1); + else + ret = dwc2_exit_hibernation(hsotg, 0, 0, 0); + + if (ret) + dev_err(hsotg->dev, + "exit hibernation failed.\n"); + } + + /* Exit Partial Power Down when driver is removed. */ + if (hsotg->in_ppd) { + ret = dwc2_exit_partial_power_down(hsotg, 0, true); + if (ret) + dev_err(hsotg->dev, + "exit partial_power_down failed\n"); + } + + /* Exit clock gating when driver is removed. */ + if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE && + hsotg->bus_suspended) { + if (dwc2_is_device_mode(hsotg)) + dwc2_gadget_exit_clock_gating(hsotg, 0); + else + dwc2_host_exit_clock_gating(hsotg, 0); + } + + dwc2_debugfs_exit(hsotg); + if (hsotg->hcd_enabled) + dwc2_hcd_remove(hsotg); + if (hsotg->gadget_enabled) + dwc2_hsotg_remove(hsotg); + + dwc2_drd_exit(hsotg); + + if (hsotg->params.activate_stm_id_vb_detection) + regulator_disable(hsotg->usb33d); + + if (hsotg->ll_hw_enabled) + dwc2_lowlevel_hw_disable(hsotg); + + return 0; +} + +/** + * dwc2_driver_shutdown() - Called on device shutdown + * + * @dev: Platform device + * + * In specific conditions (involving usb hubs) dwc2 devices can create a + * lot of interrupts, even to the point of overwhelming devices running + * at low frequencies. Some devices need to do special clock handling + * at shutdown-time which may bring the system clock below the threshold + * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs + * prevents reboots/poweroffs from getting stuck in such cases. + */ +static void dwc2_driver_shutdown(struct platform_device *dev) +{ + struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); + + dwc2_disable_global_interrupts(hsotg); + synchronize_irq(hsotg->irq); +} + +/** + * dwc2_check_core_endianness() - Returns true if core and AHB have + * opposite endianness. + * @hsotg: Programming view of the DWC_otg controller. + */ +static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg) +{ + u32 snpsid; + + snpsid = ioread32(hsotg->regs + GSNPSID); + if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID || + (snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID || + (snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID) + return false; + return true; +} + +/** + * dwc2_check_core_version() - Check core version + * + * @hsotg: Programming view of the DWC_otg controller + * + */ +int dwc2_check_core_version(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hw_params *hw = &hsotg->hw_params; + + /* + * Attempt to ensure this device is really a DWC_otg Controller. + * Read and verify the GSNPSID register contents. The value should be + * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx + */ + + hw->snpsid = dwc2_readl(hsotg, GSNPSID); + if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID && + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID && + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) { + dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n", + hw->snpsid); + return -ENODEV; + } + + dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n", + hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, + hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); + return 0; +} + +/** + * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg + * driver + * + * @dev: Platform device + * + * This routine creates the driver components required to control the device + * (core, HCD, and PCD) and initializes the device. The driver components are + * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved + * in the device private data. This allows the driver to access the dwc2_hsotg + * structure on subsequent calls to driver methods for this device. + */ +static int dwc2_driver_probe(struct platform_device *dev) +{ + struct dwc2_hsotg *hsotg; + struct resource *res; + int retval; + + hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); + if (!hsotg) + return -ENOMEM; + + hsotg->dev = &dev->dev; + + /* + * Use reasonable defaults so platforms don't have to provide these. + */ + if (!dev->dev.dma_mask) + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); + if (retval) { + dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval); + return retval; + } + + hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res); + if (IS_ERR(hsotg->regs)) + return PTR_ERR(hsotg->regs); + + dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", + (unsigned long)res->start, hsotg->regs); + + retval = dwc2_lowlevel_hw_init(hsotg); + if (retval) + return retval; + + spin_lock_init(&hsotg->lock); + + hsotg->irq = platform_get_irq(dev, 0); + if (hsotg->irq < 0) + return hsotg->irq; + + dev_dbg(hsotg->dev, "registering common handler for irq%d\n", + hsotg->irq); + retval = devm_request_irq(hsotg->dev, hsotg->irq, + dwc2_handle_common_intr, IRQF_SHARED, + dev_name(hsotg->dev), hsotg); + if (retval) + return retval; + + hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus"); + if (IS_ERR(hsotg->vbus_supply)) { + retval = PTR_ERR(hsotg->vbus_supply); + hsotg->vbus_supply = NULL; + if (retval != -ENODEV) + return retval; + } + + retval = dwc2_lowlevel_hw_enable(hsotg); + if (retval) + return retval; + + hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg); + + retval = dwc2_get_dr_mode(hsotg); + if (retval) + goto error; + + hsotg->need_phy_for_wake = + of_property_read_bool(dev->dev.of_node, + "snps,need-phy-for-wake"); + + /* + * Before performing any core related operations + * check core version. + */ + retval = dwc2_check_core_version(hsotg); + if (retval) + goto error; + + /* + * Reset before dwc2_get_hwparams() then it could get power-on real + * reset value form registers. + */ + retval = dwc2_core_reset(hsotg, false); + if (retval) + goto error; + + /* Detect config values from hardware */ + retval = dwc2_get_hwparams(hsotg); + if (retval) + goto error; + + /* + * For OTG cores, set the force mode bits to reflect the value + * of dr_mode. Force mode bits should not be touched at any + * other time after this. + */ + dwc2_force_dr_mode(hsotg); + + retval = dwc2_init_params(hsotg); + if (retval) + goto error; + + if (hsotg->params.activate_stm_id_vb_detection) { + u32 ggpio; + + hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d"); + if (IS_ERR(hsotg->usb33d)) { + retval = PTR_ERR(hsotg->usb33d); + dev_err_probe(hsotg->dev, retval, "failed to request usb33d supply\n"); + goto error; + } + retval = regulator_enable(hsotg->usb33d); + if (retval) { + dev_err_probe(hsotg->dev, retval, "failed to enable usb33d supply\n"); + goto error; + } + + ggpio = dwc2_readl(hsotg, GGPIO); + ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN; + ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN; + dwc2_writel(hsotg, ggpio, GGPIO); + + /* ID/VBUS detection startup time */ + usleep_range(5000, 7000); + } + + retval = dwc2_drd_init(hsotg); + if (retval) { + dev_err_probe(hsotg->dev, retval, "failed to initialize dual-role\n"); + goto error_init; + } + + if (hsotg->dr_mode != USB_DR_MODE_HOST) { + retval = dwc2_gadget_init(hsotg); + if (retval) + goto error_drd; + hsotg->gadget_enabled = 1; + } + + /* + * If we need PHY for wakeup we must be wakeup capable. + * When we have a device that can wake without the PHY we + * can adjust this condition. + */ + if (hsotg->need_phy_for_wake) + device_set_wakeup_capable(&dev->dev, true); + + hsotg->reset_phy_on_wake = + of_property_read_bool(dev->dev.of_node, + "snps,reset-phy-on-wake"); + if (hsotg->reset_phy_on_wake && !hsotg->phy) { + dev_warn(hsotg->dev, + "Quirk reset-phy-on-wake only supports generic PHYs\n"); + hsotg->reset_phy_on_wake = false; + } + + if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { + retval = dwc2_hcd_init(hsotg); + if (retval) { + if (hsotg->gadget_enabled) + dwc2_hsotg_remove(hsotg); + goto error_drd; + } + hsotg->hcd_enabled = 1; + } + + platform_set_drvdata(dev, hsotg); + hsotg->hibernated = 0; + + dwc2_debugfs_init(hsotg); + + /* Gadget code manages lowlevel hw on its own */ + if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) + dwc2_lowlevel_hw_disable(hsotg); + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /* Postponed adding a new gadget to the udc class driver list */ + if (hsotg->gadget_enabled) { + retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget); + if (retval) { + hsotg->gadget.udc = NULL; + dwc2_hsotg_remove(hsotg); + goto error_debugfs; + } + } +#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ + return 0; + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ + IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +error_debugfs: + dwc2_debugfs_exit(hsotg); + if (hsotg->hcd_enabled) + dwc2_hcd_remove(hsotg); +#endif +error_drd: + dwc2_drd_exit(hsotg); + +error_init: + if (hsotg->params.activate_stm_id_vb_detection) + regulator_disable(hsotg->usb33d); +error: + if (hsotg->ll_hw_enabled) + dwc2_lowlevel_hw_disable(hsotg); + return retval; +} + +static int __maybe_unused dwc2_suspend(struct device *dev) +{ + struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); + bool is_device_mode = dwc2_is_device_mode(dwc2); + int ret = 0; + + if (is_device_mode) + dwc2_hsotg_suspend(dwc2); + + dwc2_drd_suspend(dwc2); + + if (dwc2->params.activate_stm_id_vb_detection) { + unsigned long flags; + u32 ggpio, gotgctl; + + /* + * Need to force the mode to the current mode to avoid Mode + * Mismatch Interrupt when ID detection will be disabled. + */ + dwc2_force_mode(dwc2, !is_device_mode); + + spin_lock_irqsave(&dwc2->lock, flags); + gotgctl = dwc2_readl(dwc2, GOTGCTL); + /* bypass debounce filter, enable overrides */ + gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS; + gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN; + /* Force A / B session if needed */ + if (gotgctl & GOTGCTL_ASESVLD) + gotgctl |= GOTGCTL_AVALOVAL; + if (gotgctl & GOTGCTL_BSESVLD) + gotgctl |= GOTGCTL_BVALOVAL; + dwc2_writel(dwc2, gotgctl, GOTGCTL); + spin_unlock_irqrestore(&dwc2->lock, flags); + + ggpio = dwc2_readl(dwc2, GGPIO); + ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN; + ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN; + dwc2_writel(dwc2, ggpio, GGPIO); + + regulator_disable(dwc2->usb33d); + } + + if (dwc2->ll_hw_enabled && + (is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) { + ret = __dwc2_lowlevel_hw_disable(dwc2); + dwc2->phy_off_for_suspend = true; + } + + return ret; +} + +static int __maybe_unused dwc2_resume(struct device *dev) +{ + struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); + int ret = 0; + + if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) { + ret = __dwc2_lowlevel_hw_enable(dwc2); + if (ret) + return ret; + } + dwc2->phy_off_for_suspend = false; + + if (dwc2->params.activate_stm_id_vb_detection) { + unsigned long flags; + u32 ggpio, gotgctl; + + ret = regulator_enable(dwc2->usb33d); + if (ret) + return ret; + + ggpio = dwc2_readl(dwc2, GGPIO); + ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN; + ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN; + dwc2_writel(dwc2, ggpio, GGPIO); + + /* ID/VBUS detection startup time */ + usleep_range(5000, 7000); + + spin_lock_irqsave(&dwc2->lock, flags); + gotgctl = dwc2_readl(dwc2, GOTGCTL); + gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS; + gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | + GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL); + dwc2_writel(dwc2, gotgctl, GOTGCTL); + spin_unlock_irqrestore(&dwc2->lock, flags); + } + + if (!dwc2->role_sw) { + /* Need to restore FORCEDEVMODE/FORCEHOSTMODE */ + dwc2_force_dr_mode(dwc2); + } else { + dwc2_drd_resume(dwc2); + } + + if (dwc2_is_device_mode(dwc2)) + ret = dwc2_hsotg_resume(dwc2); + + return ret; +} + +static const struct dev_pm_ops dwc2_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume) +}; + +static struct platform_driver dwc2_platform_driver = { + .driver = { + .name = dwc2_driver_name, + .of_match_table = dwc2_of_match_table, + .acpi_match_table = ACPI_PTR(dwc2_acpi_match), + .pm = &dwc2_dev_pm_ops, + }, + .probe = dwc2_driver_probe, + .remove = dwc2_driver_remove, + .shutdown = dwc2_driver_shutdown, +}; + +module_platform_driver(dwc2_platform_driver); |