Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 489 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/bdc/bdc.h b/drivers/usb/gadget/udc/bdc/bdc.h
new file mode 100644
index 000000000..8d00b1239
--- /dev/null
+++ b/drivers/usb/gadget/udc/bdc/bdc.h
@@ -0,0 +1,489 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * bdc.h - header for the BRCM BDC USB3.0 device controller
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * Author: Ashwini Pahuja
+ */
+
+#ifndef	__LINUX_BDC_H__
+#define	__LINUX_BDC_H__
+
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/debugfs.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <asm/unaligned.h>
+
+#define BRCM_BDC_NAME "bdc"
+#define BRCM_BDC_DESC "Broadcom USB Device Controller driver"
+
+#define DMA_ADDR_INVALID        (~(dma_addr_t)0)
+
+/* BDC command operation timeout in usec*/
+#define BDC_CMD_TIMEOUT	1000
+/* BDC controller operation timeout in usec*/
+#define BDC_COP_TIMEOUT	500
+
+/*
+ * Maximum size of ep0 response buffer for ch9 requests,
+ * the set_sel request uses 6 so far, the max.
+ */
+#define EP0_RESPONSE_BUFF  6
+/* Start with SS as default */
+#define EP0_MAX_PKT_SIZE 512
+
+/* 64 entries in a SRR */
+#define NUM_SR_ENTRIES	64
+
+/* Num of bds per table */
+#define NUM_BDS_PER_TABLE	64
+
+/* Num of tables in bd list for control,bulk and Int ep */
+#define NUM_TABLES	2
+
+/* Num of tables in bd list for Isoch ep */
+#define NUM_TABLES_ISOCH	6
+
+/* U1 Timeout default: 248usec */
+#define U1_TIMEOUT	0xf8
+
+/* Interrupt coalescence in usec */
+#define	INT_CLS	500
+
+/* Register offsets */
+/* Configuration and Capability registers */
+#define BDC_BDCCFG0	0x00
+#define BDC_BDCCFG1	0x04
+#define BDC_BDCCAP0	0x08
+#define BDC_BDCCAP1	0x0c
+#define BDC_CMDPAR0	0x10
+#define BDC_CMDPAR1	0x14
+#define BDC_CMDPAR2	0x18
+#define BDC_CMDSC	0x1c
+#define BDC_USPC	0x20
+#define BDC_USPPMS	0x28
+#define BDC_USPPM2	0x2c
+#define BDC_SPBBAL	0x38
+#define BDC_SPBBAH	0x3c
+#define BDC_BDCSC	0x40
+#define BDC_XSFNTF	0x4c
+
+#define BDC_DVCSA	0x50
+#define BDC_DVCSB	0x54
+#define BDC_EPSTS0	0x60
+#define BDC_EPSTS1	0x64
+#define BDC_EPSTS2	0x68
+#define BDC_EPSTS3	0x6c
+#define BDC_EPSTS4	0x70
+#define BDC_EPSTS5	0x74
+#define BDC_EPSTS6	0x78
+#define BDC_EPSTS7	0x7c
+#define BDC_SRRBAL(n)	(0x200 + ((n) * 0x10))
+#define BDC_SRRBAH(n)	(0x204 + ((n) * 0x10))
+#define BDC_SRRINT(n)	(0x208 + ((n) * 0x10))
+#define BDC_INTCTLS(n)	(0x20c + ((n) * 0x10))
+
+/* Extended capability regs */
+#define BDC_FSCNOC	0xcd4
+#define BDC_FSCNIC	0xce4
+#define NUM_NCS(p)	((p) >> 28)
+
+/* Register bit fields and Masks */
+/* BDC Configuration 0 */
+#define BDC_PGS(p)	(((p) & (0x7 << 8)) >> 8)
+#define BDC_SPB(p)	((p) & 0x7)
+
+/* BDC Capability1 */
+#define BDC_P64		BIT(0)
+
+/* BDC Command register */
+#define BDC_CMD_FH	0xe
+#define BDC_CMD_DNC	0x6
+#define BDC_CMD_EPO	0x4
+#define BDC_CMD_BLA	0x3
+#define BDC_CMD_EPC	0x2
+#define BDC_CMD_DVC	0x1
+#define BDC_CMD_CWS		BIT(5)
+#define BDC_CMD_CST(p)		(((p) & (0xf << 6))>>6)
+#define BDC_CMD_EPN(p)		(((p) & 0x1f) << 10)
+#define BDC_SUB_CMD_ADD		(0x1 << 17)
+#define BDC_SUB_CMD_FWK		(0x4 << 17)
+/* Reset sequence number */
+#define BDC_CMD_EPO_RST_SN	(0x1 << 16)
+#define BDC_CMD_EP0_XSD		(0x1 << 16)
+#define BDC_SUB_CMD_ADD_EP	(0x1 << 17)
+#define BDC_SUB_CMD_DRP_EP	(0x2 << 17)
+#define BDC_SUB_CMD_EP_STP	(0x2 << 17)
+#define BDC_SUB_CMD_EP_STL	(0x4 << 17)
+#define BDC_SUB_CMD_EP_RST	(0x1 << 17)
+#define BDC_CMD_SRD		BIT(27)
+
+/* CMD completion status */
+#define BDC_CMDS_SUCC	0x1
+#define BDC_CMDS_PARA	0x3
+#define BDC_CMDS_STAT	0x4
+#define BDC_CMDS_FAIL	0x5
+#define BDC_CMDS_INTL	0x6
+#define BDC_CMDS_BUSY	0xf
+
+/* CMDSC Param 2 shifts */
+#define EPT_SHIFT	22
+#define MP_SHIFT	10
+#define MB_SHIFT	6
+#define EPM_SHIFT	4
+
+/* BDC USPSC */
+#define BDC_VBC		BIT(31)
+#define BDC_PRC		BIT(30)
+#define BDC_PCE		BIT(29)
+#define BDC_CFC		BIT(28)
+#define BDC_PCC		BIT(27)
+#define BDC_PSC		BIT(26)
+#define BDC_VBS		BIT(25)
+#define BDC_PRS		BIT(24)
+#define BDC_PCS		BIT(23)
+#define BDC_PSP(p)	(((p) & (0x7 << 20))>>20)
+#define BDC_SCN		BIT(8)
+#define BDC_SDC		BIT(7)
+#define BDC_SWS		BIT(4)
+
+#define BDC_USPSC_RW	(BDC_SCN|BDC_SDC|BDC_SWS|0xf)
+#define BDC_PSP(p)	(((p) & (0x7 << 20))>>20)
+
+#define BDC_SPEED_FS	0x1
+#define BDC_SPEED_LS	0x2
+#define BDC_SPEED_HS	0x3
+#define BDC_SPEED_SS	0x4
+
+#define BDC_PST(p)	((p) & 0xf)
+#define BDC_PST_MASK	0xf
+
+/* USPPMS */
+#define BDC_U2E		BIT(31)
+#define BDC_U1E		BIT(30)
+#define BDC_U2A		BIT(29)
+#define BDC_PORT_W1S	BIT(17)
+#define BDC_U1T(p)	((p) & 0xff)
+#define BDC_U2T(p)	(((p) & 0xff) << 8)
+#define BDC_U1T_MASK	0xff
+
+/* USBPM2 */
+/* Hardware LPM Enable */
+#define BDC_HLE		BIT(16)
+
+/* BDC Status and Control */
+#define BDC_COP_RST	(1 << 29)
+#define BDC_COP_RUN	(2 << 29)
+#define BDC_COP_STP	(4 << 29)
+
+#define BDC_COP_MASK (BDC_COP_RST|BDC_COP_RUN|BDC_COP_STP)
+
+#define BDC_COS		BIT(28)
+#define BDC_CSTS(p)	(((p) & (0x7 << 20)) >> 20)
+#define BDC_MASK_MCW	BIT(7)
+#define BDC_GIE		BIT(1)
+#define BDC_GIP		BIT(0)
+
+#define BDC_HLT	1
+#define BDC_NOR	2
+#define BDC_OIP	7
+
+/* Buffer descriptor and Status report bit fields and masks */
+#define BD_TYPE_BITMASK	(0xf)
+#define BD_CHAIN	0xf
+
+#define BD_TFS_SHIFT	4
+#define BD_SOT		BIT(26)
+#define BD_EOT		BIT(27)
+#define BD_ISP		BIT(29)
+#define BD_IOC		BIT(30)
+#define BD_SBF		BIT(31)
+
+#define BD_INTR_TARGET(p)	(((p) & 0x1f) << 27)
+
+#define BDC_SRR_RWS		BIT(4)
+#define BDC_SRR_RST		BIT(3)
+#define BDC_SRR_ISR		BIT(2)
+#define BDC_SRR_IE		BIT(1)
+#define BDC_SRR_IP		BIT(0)
+#define BDC_SRR_EPI(p)	(((p) & (0xff << 24)) >> 24)
+#define BDC_SRR_DPI(p) (((p) & (0xff << 16)) >> 16)
+#define BDC_SRR_DPI_MASK	0x00ff0000
+
+#define MARK_CHAIN_BD	(BD_CHAIN|BD_EOT|BD_SOT)
+
+/* Control transfer BD specific fields */
+#define BD_DIR_IN		BIT(25)
+
+#define BDC_PTC_MASK	0xf0000000
+
+/* status report defines */
+#define SR_XSF		0
+#define SR_USPC		4
+#define SR_BD_LEN(p)    ((p) & 0xffffff)
+
+#define XSF_SUCC	0x1
+#define XSF_SHORT	0x3
+#define XSF_BABB	0x4
+#define XSF_SETUP_RECV	0x6
+#define XSF_DATA_START	0x7
+#define XSF_STATUS_START 0x8
+
+#define XSF_STS(p) (((p) >> 28) & 0xf)
+
+/* Transfer BD fields */
+#define BD_LEN(p) ((p) & 0x1ffff)
+#define BD_LTF		BIT(25)
+#define BD_TYPE_DS	0x1
+#define BD_TYPE_SS	0x2
+
+#define BDC_EP_ENABLED     BIT(0)
+#define BDC_EP_STALL       BIT(1)
+#define BDC_EP_STOP        BIT(2)
+
+/* One BD can transfer max 65536 bytes */
+#define BD_MAX_BUFF_SIZE	(1 << 16)
+/* Maximum bytes in one XFR, Refer to BDC spec */
+#define MAX_XFR_LEN		16777215
+
+/* defines for Force Header command */
+#define DEV_NOTF_TYPE 6
+#define FWK_SUBTYPE  1
+#define TRA_PACKET   4
+
+#define to_bdc_ep(e)		container_of(e, struct bdc_ep, usb_ep)
+#define to_bdc_req(r)		container_of(r, struct bdc_req, usb_req)
+#define gadget_to_bdc(g)	container_of(g, struct bdc, gadget)
+
+/* FUNCTION WAKE DEV NOTIFICATION interval, USB3 spec table 8.13 */
+#define BDC_TNOTIFY 2500 /*in ms*/
+/* Devstatus bitfields */
+#define REMOTE_WAKEUP_ISSUED	BIT(16)
+#define DEVICE_SUSPENDED	BIT(17)
+#define FUNC_WAKE_ISSUED	BIT(18)
+#define REMOTE_WAKE_ENABLE	(1 << USB_DEVICE_REMOTE_WAKEUP)
+
+/* On disconnect, preserve these bits and clear rest */
+#define DEVSTATUS_CLEAR		(1 << USB_DEVICE_SELF_POWERED)
+/* Hardware and software Data structures */
+
+/* Endpoint bd: buffer descriptor */
+struct bdc_bd {
+	__le32 offset[4];
+};
+
+/* Status report in Status report ring(srr) */
+struct bdc_sr {
+	__le32 offset[4];
+};
+
+/* bd_table: contiguous bd's in a table */
+struct bd_table {
+	struct bdc_bd *start_bd;
+	/* dma address of start bd of table*/
+	dma_addr_t dma;
+};
+
+/*
+ * Each endpoint has a bdl(buffer descriptor list), bdl consists of 1 or more bd
+ * table's chained to each other through a chain bd, every table has equal
+ * number of bds. the software uses bdi(bd index) to refer to particular bd in
+ * the list.
+ */
+struct bd_list {
+	/* Array of bd table pointers*/
+	struct bd_table **bd_table_array;
+	/* How many tables chained to each other */
+	int num_tabs;
+	/* Max_bdi = num_tabs * num_bds_table - 1 */
+	int max_bdi;
+	/* current enq bdi from sw point of view */
+	int eqp_bdi;
+	/* current deq bdi from sw point of view */
+	int hwd_bdi;
+	/* numbers of bds per table */
+	int num_bds_table;
+};
+
+struct bdc_req;
+
+/* Representation of a transfer, one transfer can have multiple bd's */
+struct bd_transfer {
+	struct bdc_req *req;
+	/* start bd index */
+	int start_bdi;
+	/* this will be the next hw dqp when this transfer completes */
+	int next_hwd_bdi;
+	/* number of bds in this transfer */
+	int num_bds;
+};
+
+/*
+ * Representation of a gadget request, every gadget request is contained
+ * by 1 bd_transfer.
+ */
+struct bdc_req {
+	struct usb_request	usb_req;
+	struct list_head	queue;
+	struct bdc_ep		*ep;
+	/* only one Transfer per request */
+	struct bd_transfer bd_xfr;
+	int	epnum;
+};
+
+/* scratchpad buffer needed by bdc hardware */
+struct bdc_scratchpad {
+	dma_addr_t sp_dma;
+	void *buff;
+	u32 size;
+};
+
+/* endpoint representation */
+struct bdc_ep {
+	struct usb_ep	usb_ep;
+	struct list_head queue;
+	struct bdc *bdc;
+	u8  ep_type;
+	u8  dir;
+	u8  ep_num;
+	const struct usb_ss_ep_comp_descriptor	*comp_desc;
+	const struct usb_endpoint_descriptor	*desc;
+	unsigned int flags;
+	char name[20];
+	/* endpoint bd list*/
+	struct bd_list bd_list;
+	/*
+	 * HW generates extra event for multi bd tranfers, this flag helps in
+	 * ignoring the extra event
+	 */
+	bool ignore_next_sr;
+};
+
+/* bdc cmmand parameter structure */
+struct bdc_cmd_params {
+	u32	param2;
+	u32	param1;
+	u32	param0;
+};
+
+/* status report ring(srr), currently one srr is supported for entire system */
+struct srr {
+	struct bdc_sr *sr_bds;
+	u16	eqp_index;
+	u16	dqp_index;
+	dma_addr_t	dma_addr;
+};
+
+/* EP0 states */
+enum bdc_ep0_state {
+	WAIT_FOR_SETUP = 0,
+	WAIT_FOR_DATA_START,
+	WAIT_FOR_DATA_XMIT,
+	WAIT_FOR_STATUS_START,
+	WAIT_FOR_STATUS_XMIT,
+	STATUS_PENDING
+};
+
+/* Link states */
+enum bdc_link_state {
+	BDC_LINK_STATE_U0	= 0x00,
+	BDC_LINK_STATE_U3	= 0x03,
+	BDC_LINK_STATE_RX_DET	= 0x05,
+	BDC_LINK_STATE_RESUME	= 0x0f
+};
+
+/* representation of bdc */
+struct bdc {
+	struct usb_gadget	gadget;
+	struct usb_gadget_driver	*gadget_driver;
+	struct device	*dev;
+	/* device lock */
+	spinlock_t	lock;
+
+	/* generic phy */
+	struct phy      **phys;
+	int num_phys;
+	/* num of endpoints for a particular instantiation of IP */
+	unsigned int num_eps;
+	/*
+	 * Array of ep's, it uses the same index covention as bdc hw i.e.
+	 * 1 for ep0, 2 for 1out,3 for 1in ....
+	 */
+	struct bdc_ep		**bdc_ep_array;
+	void __iomem		*regs;
+	struct bdc_scratchpad	scratchpad;
+	u32	sp_buff_size;
+	/* current driver supports 1 status ring */
+	struct srr	srr;
+	/* Last received setup packet */
+	struct	usb_ctrlrequest setup_pkt;
+	struct	bdc_req ep0_req;
+	struct	bdc_req status_req;
+	enum	bdc_ep0_state ep0_state;
+	bool	delayed_status;
+	bool	zlp_needed;
+	bool	reinit;
+	bool	pullup;
+	/* Bits 0-15 are standard and 16-31 for proprietary information */
+	u32	devstatus;
+	int	irq;
+	void	*mem;
+	u32	dev_addr;
+	/* DMA pools */
+	struct dma_pool	*bd_table_pool;
+	u8		test_mode;
+	/* array of callbacks for various status report handlers */
+	void (*sr_handler[2])(struct bdc *, struct bdc_sr *);
+	/* ep0 callback handlers */
+	void (*sr_xsf_ep0[3])(struct bdc *, struct bdc_sr *);
+	/* ep0 response buffer for ch9 requests like GET_STATUS and SET_SEL */
+	unsigned char		ep0_response_buff[EP0_RESPONSE_BUFF];
+	/*
+	 * Timer to check if host resumed transfer after bdc sent Func wake
+	 * notification  packet after a remote wakeup. if not, then resend the
+	 * Func Wake packet every 2.5 secs. Refer to USB3 spec section 8.5.6.4
+	 */
+	struct delayed_work	func_wake_notify;
+	struct clk		*clk;
+};
+
+static inline u32 bdc_readl(void __iomem *base, u32 offset)
+{
+	return readl(base + offset);
+}
+
+static inline void bdc_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel(value, base + offset);
+}
+
+/* Buffer descriptor list operations */
+void bdc_notify_xfr(struct bdc *bdc, u32 epnum);
+void bdc_softconn(struct bdc *bdc);
+void bdc_softdisconn(struct bdc *bdc);
+int bdc_run(struct bdc *bdc);
+int bdc_stop(struct bdc *bdc);
+int bdc_reset(struct bdc *bdc);
+int bdc_udc_init(struct bdc *bdc);
+void bdc_udc_exit(struct bdc *bdc);
+int bdc_reinit(struct bdc *bdc);
+
+/* Status report handlers */
+/* Upstream port status change sr */
+void bdc_sr_uspc(struct bdc *bdc, struct bdc_sr *sreport);
+/* transfer sr */
+void bdc_sr_xsf(struct bdc *bdc, struct bdc_sr *sreport);
+/* EP0 XSF handlers */
+void bdc_xsf_ep0_setup_recv(struct bdc *bdc, struct bdc_sr *sreport);
+void bdc_xsf_ep0_data_start(struct bdc *bdc, struct bdc_sr *sreport);
+void bdc_xsf_ep0_status_start(struct bdc *bdc, struct bdc_sr *sreport);
+
+#endif /* __LINUX_BDC_H__ */