Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 390 insertions, 0 deletions

diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
new file mode 100644
index 000000000..34716a9f4
--- /dev/null
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * NetChip 2280 high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ */
+
+/*
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
+ */
+
+#include <linux/usb/net2280.h>
+#include <linux/usb/usb338x.h>
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef	__KERNEL__
+
+/* indexed registers [11.10] are accessed indirectly
+ * caller must own the device lock.
+ */
+
+static inline u32 get_idx_reg(struct net2280_regs __iomem *regs, u32 index)
+{
+	writel(index, &regs->idxaddr);
+	/* NOTE:  synchs device/cpu memory views */
+	return readl(&regs->idxdata);
+}
+
+static inline void
+set_idx_reg(struct net2280_regs __iomem *regs, u32 index, u32 value)
+{
+	writel(index, &regs->idxaddr);
+	writel(value, &regs->idxdata);
+	/* posted, may not be visible yet */
+}
+
+#endif	/* __KERNEL__ */
+
+#define PCI_VENDOR_ID_PLX_LEGACY 0x17cc
+
+#define PLX_LEGACY		BIT(0)
+#define PLX_2280		BIT(1)
+#define PLX_SUPERSPEED		BIT(2)
+#define PLX_PCIE		BIT(3)
+
+#define REG_DIAG		0x0
+#define     RETRY_COUNTER                                       16
+#define     FORCE_PCI_SERR                                      11
+#define     FORCE_PCI_INTERRUPT                                 10
+#define     FORCE_USB_INTERRUPT                                 9
+#define     FORCE_CPU_INTERRUPT                                 8
+#define     ILLEGAL_BYTE_ENABLES                                5
+#define     FAST_TIMES                                          4
+#define     FORCE_RECEIVE_ERROR                                 2
+#define     FORCE_TRANSMIT_CRC_ERROR                            0
+#define REG_FRAME		0x02	/* from last sof */
+#define REG_CHIPREV		0x03	/* in bcd */
+#define	REG_HS_NAK_RATE		0x0a	/* NAK per N uframes */
+
+#define	CHIPREV_1	0x0100
+#define	CHIPREV_1A	0x0110
+
+/* DEFECT 7374 */
+#define DEFECT_7374_NUMBEROF_MAX_WAIT_LOOPS         200
+#define DEFECT_7374_PROCESSOR_WAIT_TIME             10
+
+/* ep0 max packet size */
+#define EP0_SS_MAX_PACKET_SIZE  0x200
+#define EP0_HS_MAX_PACKET_SIZE  0x40
+#ifdef	__KERNEL__
+
+/*-------------------------------------------------------------------------*/
+
+/* [8.3] for scatter/gather i/o
+ * use struct net2280_dma_regs bitfields
+ */
+struct net2280_dma {
+	__le32		dmacount;
+	__le32		dmaaddr;		/* the buffer */
+	__le32		dmadesc;		/* next dma descriptor */
+	__le32		_reserved;
+} __aligned(16);
+
+/*-------------------------------------------------------------------------*/
+
+/* DRIVER DATA STRUCTURES and UTILITIES */
+
+struct net2280_ep {
+	struct usb_ep				ep;
+	struct net2280_ep_regs __iomem *cfg;
+	struct net2280_ep_regs			__iomem *regs;
+	struct net2280_dma_regs			__iomem *dma;
+	struct net2280_dma			*dummy;
+	dma_addr_t				td_dma;	/* of dummy */
+	struct net2280				*dev;
+	unsigned long				irqs;
+
+	/* analogous to a host-side qh */
+	struct list_head			queue;
+	const struct usb_endpoint_descriptor	*desc;
+	unsigned				num : 8,
+						fifo_size : 12,
+						in_fifo_validate : 1,
+						out_overflow : 1,
+						stopped : 1,
+						wedged : 1,
+						is_in : 1,
+						is_iso : 1,
+						responded : 1;
+};
+
+static inline void allow_status(struct net2280_ep *ep)
+{
+	/* ep0 only */
+	writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
+		BIT(CLEAR_NAK_OUT_PACKETS) |
+		BIT(CLEAR_NAK_OUT_PACKETS_MODE),
+		&ep->regs->ep_rsp);
+	ep->stopped = 1;
+}
+
+static inline void allow_status_338x(struct net2280_ep *ep)
+{
+	/*
+	 * Control Status Phase Handshake was set by the chip when the setup
+	 * packet arrived. While set, the chip automatically NAKs the host's
+	 * Status Phase tokens.
+	 */
+	writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE), &ep->regs->ep_rsp);
+
+	ep->stopped = 1;
+
+	/* TD 9.9 Halt Endpoint test.  TD 9.22 set feature test. */
+	ep->responded = 0;
+}
+
+struct net2280_request {
+	struct usb_request		req;
+	struct net2280_dma		*td;
+	dma_addr_t			td_dma;
+	struct list_head		queue;
+	unsigned			mapped : 1,
+					valid : 1;
+};
+
+struct net2280 {
+	/* each pci device provides one gadget, several endpoints */
+	struct usb_gadget		gadget;
+	spinlock_t			lock;
+	struct net2280_ep		ep[9];
+	struct usb_gadget_driver	*driver;
+	unsigned			enabled : 1,
+					protocol_stall : 1,
+					softconnect : 1,
+					got_irq : 1,
+					region:1,
+					added:1,
+					u1_enable:1,
+					u2_enable:1,
+					ltm_enable:1,
+					wakeup_enable:1,
+					addressed_state:1,
+					async_callbacks:1,
+					bug7734_patched:1;
+	u16				chiprev;
+	int enhanced_mode;
+	int n_ep;
+	kernel_ulong_t			quirks;
+
+
+	/* pci state used to access those endpoints */
+	struct pci_dev			*pdev;
+	struct net2280_regs		__iomem *regs;
+	struct net2280_usb_regs		__iomem *usb;
+	struct usb338x_usb_ext_regs	__iomem *usb_ext;
+	struct net2280_pci_regs		__iomem *pci;
+	struct net2280_dma_regs		__iomem *dma;
+	struct net2280_dep_regs		__iomem *dep;
+	struct net2280_ep_regs		__iomem *epregs;
+	struct usb338x_ll_regs		__iomem *llregs;
+	struct usb338x_pl_regs		__iomem *plregs;
+
+	struct dma_pool			*requests;
+	/* statistics...*/
+};
+
+static inline void set_halt(struct net2280_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	writel(BIT(CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE) |
+		/* set NAK_OUT for erratum 0114 */
+		((ep->dev->chiprev == CHIPREV_1) << SET_NAK_OUT_PACKETS) |
+		BIT(SET_ENDPOINT_HALT),
+		&ep->regs->ep_rsp);
+}
+
+static inline void clear_halt(struct net2280_ep *ep)
+{
+	/* ep0 and bulk/intr endpoints */
+	writel(BIT(CLEAR_ENDPOINT_HALT) |
+		BIT(CLEAR_ENDPOINT_TOGGLE) |
+		    /*
+		     * unless the gadget driver left a short packet in the
+		     * fifo, this reverses the erratum 0114 workaround.
+		     */
+		((ep->dev->chiprev == CHIPREV_1) << CLEAR_NAK_OUT_PACKETS),
+		&ep->regs->ep_rsp);
+}
+
+/*
+ * FSM value for Defect 7374 (U1U2 Test) is managed in
+ * chip's SCRATCH register:
+ */
+#define DEFECT7374_FSM_FIELD    28
+
+/* Waiting for Control Read:
+ *  - A transition to this state indicates a fresh USB connection,
+ *    before the first Setup Packet. The connection speed is not
+ *    known. Firmware is waiting for the first Control Read.
+ *  - Starting state: This state can be thought of as the FSM's typical
+ *    starting state.
+ *  - Tip: Upon the first SS Control Read the FSM never
+ *    returns to this state.
+ */
+#define DEFECT7374_FSM_WAITING_FOR_CONTROL_READ BIT(DEFECT7374_FSM_FIELD)
+
+/* Non-SS Control Read:
+ *  - A transition to this state indicates detection of the first HS
+ *    or FS Control Read.
+ *  - Tip: Upon the first SS Control Read the FSM never
+ *    returns to this state.
+ */
+#define	DEFECT7374_FSM_NON_SS_CONTROL_READ (2 << DEFECT7374_FSM_FIELD)
+
+/* SS Control Read:
+ *  - A transition to this state indicates detection of the
+ *    first SS Control Read.
+ *  - This state indicates workaround completion. Workarounds no longer
+ *    need to be applied (as long as the chip remains powered up).
+ *  - Tip: Once in this state the FSM state does not change (until
+ *    the chip's power is lost and restored).
+ *  - This can be thought of as the final state of the FSM;
+ *    the FSM 'locks-up' in this state until the chip loses power.
+ */
+#define DEFECT7374_FSM_SS_CONTROL_READ (3 << DEFECT7374_FSM_FIELD)
+
+#ifdef USE_RDK_LEDS
+
+static inline void net2280_led_init(struct net2280 *dev)
+{
+	/* LED3 (green) is on during USB activity. note erratum 0113. */
+	writel(BIT(GPIO3_LED_SELECT) |
+		BIT(GPIO3_OUTPUT_ENABLE) |
+		BIT(GPIO2_OUTPUT_ENABLE) |
+		BIT(GPIO1_OUTPUT_ENABLE) |
+		BIT(GPIO0_OUTPUT_ENABLE),
+		&dev->regs->gpioctl);
+}
+
+/* indicate speed with bi-color LED 0/1 */
+static inline
+void net2280_led_speed(struct net2280 *dev, enum usb_device_speed speed)
+{
+	u32	val = readl(&dev->regs->gpioctl);
+	switch (speed) {
+	case USB_SPEED_SUPER:		/* green + red */
+		val |= BIT(GPIO0_DATA) | BIT(GPIO1_DATA);
+		break;
+	case USB_SPEED_HIGH:		/* green */
+		val &= ~BIT(GPIO0_DATA);
+		val |= BIT(GPIO1_DATA);
+		break;
+	case USB_SPEED_FULL:		/* red */
+		val &= ~BIT(GPIO1_DATA);
+		val |= BIT(GPIO0_DATA);
+		break;
+	default:			/* (off/black) */
+		val &= ~(BIT(GPIO1_DATA) | BIT(GPIO0_DATA));
+		break;
+	}
+	writel(val, &dev->regs->gpioctl);
+}
+
+/* indicate power with LED 2 */
+static inline void net2280_led_active(struct net2280 *dev, int is_active)
+{
+	u32	val = readl(&dev->regs->gpioctl);
+
+	/* FIXME this LED never seems to turn on.*/
+	if (is_active)
+		val |= GPIO2_DATA;
+	else
+		val &= ~GPIO2_DATA;
+	writel(val, &dev->regs->gpioctl);
+}
+
+static inline void net2280_led_shutdown(struct net2280 *dev)
+{
+	/* turn off all four GPIO*_DATA bits */
+	writel(readl(&dev->regs->gpioctl) & ~0x0f,
+			&dev->regs->gpioctl);
+}
+
+#else
+
+#define net2280_led_init(dev)		do { } while (0)
+#define net2280_led_speed(dev, speed)	do { } while (0)
+#define net2280_led_shutdown(dev)	do { } while (0)
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+#define ep_dbg(ndev, fmt, args...) \
+	dev_dbg((&((ndev)->pdev->dev)), fmt, ##args)
+
+#define ep_vdbg(ndev, fmt, args...) \
+	dev_vdbg((&((ndev)->pdev->dev)), fmt, ##args)
+
+#define ep_info(ndev, fmt, args...) \
+	dev_info((&((ndev)->pdev->dev)), fmt, ##args)
+
+#define ep_warn(ndev, fmt, args...) \
+	dev_warn((&((ndev)->pdev->dev)), fmt, ##args)
+
+#define ep_err(ndev, fmt, args...) \
+	dev_err((&((ndev)->pdev->dev)), fmt, ##args)
+
+/*-------------------------------------------------------------------------*/
+
+static inline void set_fifo_bytecount(struct net2280_ep *ep, unsigned count)
+{
+	if (ep->dev->pdev->vendor == 0x17cc)
+		writeb(count, 2 + (u8 __iomem *) &ep->regs->ep_cfg);
+	else{
+		u32 tmp = readl(&ep->cfg->ep_cfg) &
+					(~(0x07 << EP_FIFO_BYTE_COUNT));
+		writel(tmp | (count << EP_FIFO_BYTE_COUNT), &ep->cfg->ep_cfg);
+	}
+}
+
+static inline void start_out_naking(struct net2280_ep *ep)
+{
+	/* NOTE:  hardware races lurk here, and PING protocol issues */
+	writel(BIT(SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+	/* synch with device */
+	readl(&ep->regs->ep_rsp);
+}
+
+static inline void stop_out_naking(struct net2280_ep *ep)
+{
+	u32	tmp;
+
+	tmp = readl(&ep->regs->ep_stat);
+	if ((tmp & BIT(NAK_OUT_PACKETS)) != 0)
+		writel(BIT(CLEAR_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+}
+
+
+static inline void set_max_speed(struct net2280_ep *ep, u32 max)
+{
+	u32 reg;
+	static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80,
+					  0x50, 0x20, 0x70, 0x40, 0x90 };
+
+	if (ep->dev->enhanced_mode) {
+		reg = ep_enhanced[ep->num];
+		switch (ep->dev->gadget.speed) {
+		case USB_SPEED_SUPER:
+			reg += 2;
+			break;
+		case USB_SPEED_FULL:
+			reg += 1;
+			break;
+		case USB_SPEED_HIGH:
+		default:
+			break;
+		}
+	} else {
+		reg = (ep->num + 1) * 0x10;
+		if (ep->dev->gadget.speed != USB_SPEED_HIGH)
+			reg += 1;
+	}
+
+	set_idx_reg(ep->dev->regs, reg, max);
+}
+
+#endif	/* __KERNEL__ */