Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 234 insertions, 0 deletions

diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
new file mode 100644
index 000000000..591f675cc
--- /dev/null
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-1.0+
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2006 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Bus glue for OHCI HC on the of_platform bus
+ *
+ * Modified for of_platform bus from ohci-sa1111.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/signal.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+static int
+ohci_ppc_of_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int		ret;
+
+	if ((ret = ohci_init(ohci)) < 0)
+		return ret;
+
+	if ((ret = ohci_run(ohci)) < 0) {
+		dev_err(hcd->self.controller, "can't start %s\n",
+			hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct hc_driver ohci_ppc_of_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"OF OHCI",
+	.hcd_priv_size =	sizeof(struct ohci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			ohci_irq,
+	.flags =		HCD_USB11 | HCD_DMA | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.start =		ohci_ppc_of_start,
+	.stop =			ohci_stop,
+	.shutdown = 		ohci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		ohci_urb_enqueue,
+	.urb_dequeue =		ohci_urb_dequeue,
+	.endpoint_disable =	ohci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	ohci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data =	ohci_hub_status_data,
+	.hub_control =		ohci_hub_control,
+#ifdef	CONFIG_PM
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
+#endif
+	.start_port_reset =	ohci_start_port_reset,
+};
+
+
+static int ohci_hcd_ppc_of_probe(struct platform_device *op)
+{
+	struct device_node *dn = op->dev.of_node;
+	struct usb_hcd *hcd;
+	struct ohci_hcd	*ohci;
+	struct resource res;
+	int irq;
+
+	int rv;
+	int is_bigendian;
+	struct device_node *np;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	is_bigendian =
+		of_device_is_compatible(dn, "ohci-bigendian") ||
+		of_device_is_compatible(dn, "ohci-be");
+
+	dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
+
+	rv = of_address_to_resource(dn, 0, &res);
+	if (rv)
+		return rv;
+
+	hcd = usb_create_hcd(&ohci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = res.start;
+	hcd->rsrc_len = resource_size(&res);
+
+	hcd->regs = devm_ioremap_resource(&op->dev, &res);
+	if (IS_ERR(hcd->regs)) {
+		rv = PTR_ERR(hcd->regs);
+		goto err_rmr;
+	}
+
+	irq = irq_of_parse_and_map(dn, 0);
+	if (irq == NO_IRQ) {
+		dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n",
+			__FILE__);
+		rv = -EBUSY;
+		goto err_rmr;
+	}
+
+	ohci = hcd_to_ohci(hcd);
+	if (is_bigendian) {
+		ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+		if (of_device_is_compatible(dn, "fsl,mpc5200-ohci"))
+			ohci->flags |= OHCI_QUIRK_FRAME_NO;
+		if (of_device_is_compatible(dn, "mpc5200-ohci"))
+			ohci->flags |= OHCI_QUIRK_FRAME_NO;
+	}
+
+	ohci_hcd_init(ohci);
+
+	rv = usb_add_hcd(hcd, irq, 0);
+	if (rv == 0) {
+		device_wakeup_enable(hcd->self.controller);
+		return 0;
+	}
+
+	/* by now, 440epx is known to show usb_23 erratum */
+	np = of_find_compatible_node(NULL, NULL, "ibm,usb-ehci-440epx");
+
+	/* Work around - At this point ohci_run has executed, the
+	* controller is running, everything, the root ports, etc., is
+	* set up.  If the ehci driver is loaded, put the ohci core in
+	* the suspended state.  The ehci driver will bring it out of
+	* suspended state when / if a non-high speed USB device is
+	* attached to the USB Host port.  If the ehci driver is not
+	* loaded, do nothing. request_mem_region is used to test if
+	* the ehci driver is loaded.
+	*/
+	if (np !=  NULL) {
+		if (!of_address_to_resource(np, 0, &res)) {
+			if (!request_mem_region(res.start, 0x4, hcd_name)) {
+				writel_be((readl_be(&ohci->regs->control) |
+					OHCI_USB_SUSPEND), &ohci->regs->control);
+					(void) readl_be(&ohci->regs->control);
+			} else
+				release_mem_region(res.start, 0x4);
+		} else
+			pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__);
+		of_node_put(np);
+	}
+
+	irq_dispose_mapping(irq);
+err_rmr:
+ 	usb_put_hcd(hcd);
+
+	return rv;
+}
+
+static int ohci_hcd_ppc_of_remove(struct platform_device *op)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(op);
+
+	dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
+
+	usb_remove_hcd(hcd);
+
+	irq_dispose_mapping(hcd->irq);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+static const struct of_device_id ohci_hcd_ppc_of_match[] = {
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE
+	{
+		.name = "usb",
+		.compatible = "ohci-bigendian",
+	},
+	{
+		.name = "usb",
+		.compatible = "ohci-be",
+	},
+#endif
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_LE
+	{
+		.name = "usb",
+		.compatible = "ohci-littledian",
+	},
+	{
+		.name = "usb",
+		.compatible = "ohci-le",
+	},
+#endif
+	{},
+};
+MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match);
+
+#if	!defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \
+	!defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE)
+#error "No endianness selected for ppc-of-ohci"
+#endif
+
+
+static struct platform_driver ohci_hcd_ppc_of_driver = {
+	.probe		= ohci_hcd_ppc_of_probe,
+	.remove		= ohci_hcd_ppc_of_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "ppc-of-ohci",
+		.of_match_table = ohci_hcd_ppc_of_match,
+	},
+};
+