Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 515 insertions, 0 deletions

diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
new file mode 100644
index 000000000..394b3189e
--- /dev/null
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -0,0 +1,515 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * KLSI KL5KUSB105 chip RS232 converter driver
+ *
+ *   Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
+ *   Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de>
+ *
+ * All information about the device was acquired using SniffUSB ans snoopUSB
+ * on Windows98.
+ * It was written out of frustration with the PalmConnect USB Serial adapter
+ * sold by Palm Inc.
+ * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided
+ * information that was not already available.
+ *
+ * It seems that KLSI bought some silicon-design information from ScanLogic,
+ * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI.
+ * KLSI has firmware available for their devices; it is probable that the
+ * firmware differs from that used by KLSI in their products. If you have an
+ * original KLSI device and can provide some information on it, I would be
+ * most interested in adding support for it here. If you have any information
+ * on the protocol used (or find errors in my reverse-engineered stuff), please
+ * let me know.
+ *
+ * The code was only tested with a PalmConnect USB adapter; if you
+ * are adventurous, try it with any KLSI-based device and let me know how it
+ * breaks so that I can fix it!
+ */
+
+/* TODO:
+ *	check modem line signals
+ *	implement handshaking or decide that we do not support it
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <asm/unaligned.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include "kl5kusb105.h"
+
+#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>"
+#define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver"
+
+
+/*
+ * Function prototypes
+ */
+static int klsi_105_port_probe(struct usb_serial_port *port);
+static void klsi_105_port_remove(struct usb_serial_port *port);
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
+static void klsi_105_close(struct usb_serial_port *port);
+static void klsi_105_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 const struct ktermios *old_termios);
+static int  klsi_105_tiocmget(struct tty_struct *tty);
+static void klsi_105_process_read_urb(struct urb *urb);
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size);
+
+/*
+ * All of the device info needed for the KLSI converters.
+ */
+static const struct usb_device_id id_table[] = {
+	{ USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) },
+	{ }		/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_serial_driver kl5kusb105d_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"kl5kusb105d",
+	},
+	.description =		"KL5KUSB105D / PalmConnect",
+	.id_table =		id_table,
+	.num_ports =		1,
+	.bulk_out_size =	64,
+	.open =			klsi_105_open,
+	.close =		klsi_105_close,
+	.set_termios =		klsi_105_set_termios,
+	.tiocmget =		klsi_105_tiocmget,
+	.port_probe =		klsi_105_port_probe,
+	.port_remove =		klsi_105_port_remove,
+	.throttle =		usb_serial_generic_throttle,
+	.unthrottle =		usb_serial_generic_unthrottle,
+	.process_read_urb =	klsi_105_process_read_urb,
+	.prepare_write_buffer =	klsi_105_prepare_write_buffer,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&kl5kusb105d_device, NULL
+};
+
+struct klsi_105_port_settings {
+	u8	pktlen;		/* always 5, it seems */
+	u8	baudrate;
+	u8	databits;
+	u8	unknown1;
+	u8	unknown2;
+};
+
+struct klsi_105_private {
+	struct klsi_105_port_settings	cfg;
+	unsigned long			line_state; /* modem line settings */
+	spinlock_t			lock;
+};
+
+
+/*
+ * Handle vendor specific USB requests
+ */
+
+
+#define KLSI_TIMEOUT	 5000 /* default urb timeout */
+
+static int klsi_105_chg_port_settings(struct usb_serial_port *port,
+				      struct klsi_105_port_settings *settings)
+{
+	int rc;
+
+	rc = usb_control_msg_send(port->serial->dev,
+				  0,
+				  KL5KUSB105A_SIO_SET_DATA,
+				  USB_TYPE_VENDOR | USB_DIR_OUT |
+				  USB_RECIP_INTERFACE,
+				  0, /* value */
+				  0, /* index */
+				  settings,
+				  sizeof(struct klsi_105_port_settings),
+				  KLSI_TIMEOUT,
+				  GFP_KERNEL);
+	if (rc)
+		dev_err(&port->dev,
+			"Change port settings failed (error = %d)\n", rc);
+
+	dev_dbg(&port->dev,
+		"pktlen %u, baudrate 0x%02x, databits %u, u1 %u, u2 %u\n",
+		settings->pktlen, settings->baudrate, settings->databits,
+		settings->unknown1, settings->unknown2);
+
+	return rc;
+}
+
+/*
+ * Read line control via vendor command and return result through
+ * the state pointer.
+ */
+static int klsi_105_get_line_state(struct usb_serial_port *port,
+				   unsigned long *state)
+{
+	u16 status;
+	int rc;
+
+	rc = usb_control_msg_recv(port->serial->dev, 0,
+				  KL5KUSB105A_SIO_POLL,
+				  USB_TYPE_VENDOR | USB_DIR_IN,
+				  0, /* value */
+				  0, /* index */
+				  &status, sizeof(status),
+				  10000,
+				  GFP_KERNEL);
+	if (rc) {
+		dev_err(&port->dev, "reading line status failed: %d\n", rc);
+		return rc;
+	}
+
+	le16_to_cpus(&status);
+
+	dev_dbg(&port->dev, "read status %04x\n", status);
+
+	*state = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0) |
+		 ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0);
+
+	return 0;
+}
+
+
+/*
+ * Driver's tty interface functions
+ */
+
+static int klsi_105_port_probe(struct usb_serial_port *port)
+{
+	struct klsi_105_private *priv;
+
+	priv = kmalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* set initial values for control structures */
+	priv->cfg.pktlen    = 5;
+	priv->cfg.baudrate  = kl5kusb105a_sio_b9600;
+	priv->cfg.databits  = kl5kusb105a_dtb_8;
+	priv->cfg.unknown1  = 0;
+	priv->cfg.unknown2  = 1;
+
+	priv->line_state    = 0;
+
+	spin_lock_init(&priv->lock);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static void klsi_105_port_remove(struct usb_serial_port *port)
+{
+	struct klsi_105_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct klsi_105_private *priv = usb_get_serial_port_data(port);
+	int retval = 0;
+	int rc;
+	unsigned long line_state;
+	struct klsi_105_port_settings cfg;
+	unsigned long flags;
+
+	/* Do a defined restart:
+	 * Set up sane default baud rate and send the 'READ_ON'
+	 * vendor command.
+	 * FIXME: set modem line control (how?)
+	 * Then read the modem line control and store values in
+	 * priv->line_state.
+	 */
+
+	cfg.pktlen   = 5;
+	cfg.baudrate = kl5kusb105a_sio_b9600;
+	cfg.databits = kl5kusb105a_dtb_8;
+	cfg.unknown1 = 0;
+	cfg.unknown2 = 1;
+	klsi_105_chg_port_settings(port, &cfg);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->cfg.pktlen   = cfg.pktlen;
+	priv->cfg.baudrate = cfg.baudrate;
+	priv->cfg.databits = cfg.databits;
+	priv->cfg.unknown1 = cfg.unknown1;
+	priv->cfg.unknown2 = cfg.unknown2;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* READ_ON and urb submission */
+	rc = usb_serial_generic_open(tty, port);
+	if (rc)
+		return rc;
+
+	rc = usb_control_msg(port->serial->dev,
+			     usb_sndctrlpipe(port->serial->dev, 0),
+			     KL5KUSB105A_SIO_CONFIGURE,
+			     USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE,
+			     KL5KUSB105A_SIO_CONFIGURE_READ_ON,
+			     0, /* index */
+			     NULL,
+			     0,
+			     KLSI_TIMEOUT);
+	if (rc < 0) {
+		dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
+		retval = rc;
+		goto err_generic_close;
+	} else
+		dev_dbg(&port->dev, "%s - enabled reading\n", __func__);
+
+	rc = klsi_105_get_line_state(port, &line_state);
+	if (rc < 0) {
+		retval = rc;
+		goto err_disable_read;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->line_state = line_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__,
+			line_state);
+
+	return 0;
+
+err_disable_read:
+	usb_control_msg(port->serial->dev,
+			     usb_sndctrlpipe(port->serial->dev, 0),
+			     KL5KUSB105A_SIO_CONFIGURE,
+			     USB_TYPE_VENDOR | USB_DIR_OUT,
+			     KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+			     0, /* index */
+			     NULL, 0,
+			     KLSI_TIMEOUT);
+err_generic_close:
+	usb_serial_generic_close(port);
+
+	return retval;
+}
+
+static void klsi_105_close(struct usb_serial_port *port)
+{
+	int rc;
+
+	/* send READ_OFF */
+	rc = usb_control_msg(port->serial->dev,
+			     usb_sndctrlpipe(port->serial->dev, 0),
+			     KL5KUSB105A_SIO_CONFIGURE,
+			     USB_TYPE_VENDOR | USB_DIR_OUT,
+			     KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+			     0, /* index */
+			     NULL, 0,
+			     KLSI_TIMEOUT);
+	if (rc < 0)
+		dev_err(&port->dev, "failed to disable read: %d\n", rc);
+
+	/* shutdown our bulk reads and writes */
+	usb_serial_generic_close(port);
+}
+
+/* We need to write a complete 64-byte data block and encode the
+ * number actually sent in the first double-byte, LSB-order. That
+ * leaves at most 62 bytes of payload.
+ */
+#define KLSI_HDR_LEN		2
+static int klsi_105_prepare_write_buffer(struct usb_serial_port *port,
+						void *dest, size_t size)
+{
+	unsigned char *buf = dest;
+	int count;
+
+	count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size,
+								&port->lock);
+	put_unaligned_le16(count, buf);
+
+	return count + KLSI_HDR_LEN;
+}
+
+/* The data received is preceded by a length double-byte in LSB-first order.
+ */
+static void klsi_105_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	unsigned len;
+
+	/* empty urbs seem to happen, we ignore them */
+	if (!urb->actual_length)
+		return;
+
+	if (urb->actual_length <= KLSI_HDR_LEN) {
+		dev_dbg(&port->dev, "%s - malformed packet\n", __func__);
+		return;
+	}
+
+	len = get_unaligned_le16(data);
+	if (len > urb->actual_length - KLSI_HDR_LEN) {
+		dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__);
+		len = urb->actual_length - KLSI_HDR_LEN;
+	}
+
+	tty_insert_flip_string(&port->port, data + KLSI_HDR_LEN, len);
+	tty_flip_buffer_push(&port->port);
+}
+
+static void klsi_105_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 const struct ktermios *old_termios)
+{
+	struct klsi_105_private *priv = usb_get_serial_port_data(port);
+	struct device *dev = &port->dev;
+	unsigned int iflag = tty->termios.c_iflag;
+	unsigned int old_iflag = old_termios->c_iflag;
+	unsigned int cflag = tty->termios.c_cflag;
+	unsigned int old_cflag = old_termios->c_cflag;
+	struct klsi_105_port_settings *cfg;
+	unsigned long flags;
+	speed_t baud;
+
+	cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return;
+
+	/* lock while we are modifying the settings */
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/*
+	 * Update baud rate
+	 */
+	baud = tty_get_baud_rate(tty);
+
+	switch (baud) {
+	case 0: /* handled below */
+		break;
+	case 1200:
+		priv->cfg.baudrate = kl5kusb105a_sio_b1200;
+		break;
+	case 2400:
+		priv->cfg.baudrate = kl5kusb105a_sio_b2400;
+		break;
+	case 4800:
+		priv->cfg.baudrate = kl5kusb105a_sio_b4800;
+		break;
+	case 9600:
+		priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+		break;
+	case 19200:
+		priv->cfg.baudrate = kl5kusb105a_sio_b19200;
+		break;
+	case 38400:
+		priv->cfg.baudrate = kl5kusb105a_sio_b38400;
+		break;
+	case 57600:
+		priv->cfg.baudrate = kl5kusb105a_sio_b57600;
+		break;
+	case 115200:
+		priv->cfg.baudrate = kl5kusb105a_sio_b115200;
+		break;
+	default:
+		dev_dbg(dev, "unsupported baudrate, using 9600\n");
+		priv->cfg.baudrate = kl5kusb105a_sio_b9600;
+		baud = 9600;
+		break;
+	}
+
+	/*
+	 * FIXME: implement B0 handling
+	 *
+	 * Maybe this should be simulated by sending read disable and read
+	 * enable messages?
+	 */
+
+	tty_encode_baud_rate(tty, baud, baud);
+
+	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
+		/* set the number of data bits */
+		switch (cflag & CSIZE) {
+		case CS5:
+			dev_dbg(dev, "%s - 5 bits/byte not supported\n", __func__);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			goto err;
+		case CS6:
+			dev_dbg(dev, "%s - 6 bits/byte not supported\n", __func__);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			goto err;
+		case CS7:
+			priv->cfg.databits = kl5kusb105a_dtb_7;
+			break;
+		case CS8:
+			priv->cfg.databits = kl5kusb105a_dtb_8;
+			break;
+		default:
+			dev_err(dev, "CSIZE was not CS5-CS8, using default of 8\n");
+			priv->cfg.databits = kl5kusb105a_dtb_8;
+			break;
+		}
+	}
+
+	/*
+	 * Update line control register (LCR)
+	 */
+	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))
+	    || (cflag & CSTOPB) != (old_cflag & CSTOPB)) {
+		/* Not currently supported */
+		tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB);
+	}
+	/*
+	 * Set flow control: well, I do not really now how to handle DTR/RTS.
+	 * Just do what we have seen with SniffUSB on Win98.
+	 */
+	if ((iflag & IXOFF) != (old_iflag & IXOFF)
+	    || (iflag & IXON) != (old_iflag & IXON)
+	    ||  (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+		/* Not currently supported */
+		tty->termios.c_cflag &= ~CRTSCTS;
+	}
+	memcpy(cfg, &priv->cfg, sizeof(*cfg));
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	/* now commit changes to device */
+	klsi_105_chg_port_settings(port, cfg);
+err:
+	kfree(cfg);
+}
+
+static int klsi_105_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct klsi_105_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+	int rc;
+	unsigned long line_state;
+
+	rc = klsi_105_get_line_state(port, &line_state);
+	if (rc < 0) {
+		dev_err(&port->dev,
+			"Reading line control failed (error = %d)\n", rc);
+		/* better return value? EAGAIN? */
+		return rc;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->line_state = line_state;
+	spin_unlock_irqrestore(&priv->lock, flags);
+	dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state);
+	return (int)line_state;
+}
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");