diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/usb/serial/pl2303.c | |
parent | Initial commit. (diff) | |
download | linux-upstream.tar.xz linux-upstream.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/usb/serial/pl2303.c')
-rw-r--r-- | drivers/usb/serial/pl2303.c | 1268 |
1 files changed, 1268 insertions, 0 deletions
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c new file mode 100644 index 000000000..8949c1891 --- /dev/null +++ b/drivers/usb/serial/pl2303.c @@ -0,0 +1,1268 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Prolific PL2303 USB to serial adaptor driver + * + * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2003 IBM Corp. + * + * Original driver for 2.2.x by anonymous + * + * See Documentation/usb/usb-serial.rst for more information on using this + * driver + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <asm/unaligned.h> +#include "pl2303.h" + + +#define PL2303_QUIRK_UART_STATE_IDX0 BIT(0) +#define PL2303_QUIRK_LEGACY BIT(1) +#define PL2303_QUIRK_ENDPOINT_HACK BIT(2) + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_CHILITAG) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GC) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GB) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GT) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GL) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GE) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GS) }, + { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, + { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC232B), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) }, + { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, + { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) }, + { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) }, + { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) }, + { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) }, + { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) }, + { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) }, + { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) }, + { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) }, + { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1), + .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65), + .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75), + .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, + { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */ + { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) }, + { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) }, + { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) }, + { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) }, + { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, + { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, + { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, + { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, + { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) }, + { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, + { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, + { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD381GC_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM920_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM930_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LM940_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_TD620_PRODUCT_ID) }, + { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, + { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, + { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, + { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, + { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530GC_PRODUCT_ID) }, + { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) }, + { USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +#define SET_LINE_REQUEST_TYPE 0x21 +#define SET_LINE_REQUEST 0x20 + +#define SET_CONTROL_REQUEST_TYPE 0x21 +#define SET_CONTROL_REQUEST 0x22 +#define CONTROL_DTR 0x01 +#define CONTROL_RTS 0x02 + +#define BREAK_REQUEST_TYPE 0x21 +#define BREAK_REQUEST 0x23 +#define BREAK_ON 0xffff +#define BREAK_OFF 0x0000 + +#define GET_LINE_REQUEST_TYPE 0xa1 +#define GET_LINE_REQUEST 0x21 + +#define VENDOR_WRITE_REQUEST_TYPE 0x40 +#define VENDOR_WRITE_REQUEST 0x01 +#define VENDOR_WRITE_NREQUEST 0x80 + +#define VENDOR_READ_REQUEST_TYPE 0xc0 +#define VENDOR_READ_REQUEST 0x01 +#define VENDOR_READ_NREQUEST 0x81 + +#define UART_STATE_INDEX 8 +#define UART_STATE_MSR_MASK 0x8b +#define UART_STATE_TRANSIENT_MASK 0x74 +#define UART_DCD 0x01 +#define UART_DSR 0x02 +#define UART_BREAK_ERROR 0x04 +#define UART_RING 0x08 +#define UART_FRAME_ERROR 0x10 +#define UART_PARITY_ERROR 0x20 +#define UART_OVERRUN_ERROR 0x40 +#define UART_CTS 0x80 + +#define PL2303_FLOWCTRL_MASK 0xf0 + +#define PL2303_READ_TYPE_HX_STATUS 0x8080 + +#define PL2303_HXN_RESET_REG 0x07 +#define PL2303_HXN_RESET_UPSTREAM_PIPE 0x02 +#define PL2303_HXN_RESET_DOWNSTREAM_PIPE 0x01 + +#define PL2303_HXN_FLOWCTRL_REG 0x0a +#define PL2303_HXN_FLOWCTRL_MASK 0x1c +#define PL2303_HXN_FLOWCTRL_NONE 0x1c +#define PL2303_HXN_FLOWCTRL_RTS_CTS 0x18 +#define PL2303_HXN_FLOWCTRL_XON_XOFF 0x0c + +static void pl2303_set_break(struct usb_serial_port *port, bool enable); + +enum pl2303_type { + TYPE_H, + TYPE_HX, + TYPE_TA, + TYPE_TB, + TYPE_HXD, + TYPE_HXN, + TYPE_COUNT +}; + +struct pl2303_type_data { + const char *name; + speed_t max_baud_rate; + unsigned long quirks; + unsigned int no_autoxonxoff:1; + unsigned int no_divisors:1; + unsigned int alt_divisors:1; +}; + +struct pl2303_serial_private { + const struct pl2303_type_data *type; + unsigned long quirks; +}; + +struct pl2303_private { + spinlock_t lock; + u8 line_control; + u8 line_status; + + u8 line_settings[7]; +}; + +static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = { + [TYPE_H] = { + .name = "H", + .max_baud_rate = 1228800, + .quirks = PL2303_QUIRK_LEGACY, + .no_autoxonxoff = true, + }, + [TYPE_HX] = { + .name = "HX", + .max_baud_rate = 6000000, + }, + [TYPE_TA] = { + .name = "TA", + .max_baud_rate = 6000000, + .alt_divisors = true, + }, + [TYPE_TB] = { + .name = "TB", + .max_baud_rate = 12000000, + .alt_divisors = true, + }, + [TYPE_HXD] = { + .name = "HXD", + .max_baud_rate = 12000000, + }, + [TYPE_HXN] = { + .name = "G", + .max_baud_rate = 12000000, + .no_divisors = true, + }, +}; + +static int pl2303_vendor_read(struct usb_serial *serial, u16 value, + unsigned char buf[1]) +{ + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + struct device *dev = &serial->interface->dev; + u8 request; + int res; + + if (spriv->type == &pl2303_type_data[TYPE_HXN]) + request = VENDOR_READ_NREQUEST; + else + request = VENDOR_READ_REQUEST; + + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + request, VENDOR_READ_REQUEST_TYPE, + value, 0, buf, 1, 100); + if (res != 1) { + dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__, + value, res); + if (res >= 0) + res = -EIO; + + return res; + } + + dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, buf[0]); + + return 0; +} + +static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index) +{ + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + struct device *dev = &serial->interface->dev; + u8 request; + int res; + + dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index); + + if (spriv->type == &pl2303_type_data[TYPE_HXN]) + request = VENDOR_WRITE_NREQUEST; + else + request = VENDOR_WRITE_REQUEST; + + res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + request, VENDOR_WRITE_REQUEST_TYPE, + value, index, NULL, 0, 100); + if (res) { + dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__, + value, res); + return res; + } + + return 0; +} + +static int pl2303_update_reg(struct usb_serial *serial, u8 reg, u8 mask, u8 val) +{ + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + int ret = 0; + u8 *buf; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + if (spriv->type == &pl2303_type_data[TYPE_HXN]) + ret = pl2303_vendor_read(serial, reg, buf); + else + ret = pl2303_vendor_read(serial, reg | 0x80, buf); + + if (ret) + goto out_free; + + *buf &= ~mask; + *buf |= val & mask; + + ret = pl2303_vendor_write(serial, reg, *buf); +out_free: + kfree(buf); + + return ret; +} + +static int pl2303_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + usb_set_serial_data(serial, (void *)id->driver_info); + + return 0; +} + +/* + * Use interrupt endpoint from first interface if available. + * + * This is needed due to the looney way its endpoints are set up. + */ +static int pl2303_endpoint_hack(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + struct usb_interface *interface = serial->interface; + struct usb_device *dev = serial->dev; + struct device *ddev = &interface->dev; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + unsigned int i; + + if (interface == dev->actconfig->interface[0]) + return 0; + + /* check out the endpoints of the other interface */ + iface_desc = dev->actconfig->interface[0]->cur_altsetting; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (!usb_endpoint_is_int_in(endpoint)) + continue; + + dev_dbg(ddev, "found interrupt in on separate interface\n"); + if (epds->num_interrupt_in < ARRAY_SIZE(epds->interrupt_in)) + epds->interrupt_in[epds->num_interrupt_in++] = endpoint; + } + + return 0; +} + +static int pl2303_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + unsigned long quirks = (unsigned long)usb_get_serial_data(serial); + struct device *dev = &serial->interface->dev; + int ret; + + if (quirks & PL2303_QUIRK_ENDPOINT_HACK) { + ret = pl2303_endpoint_hack(serial, epds); + if (ret) + return ret; + } + + if (epds->num_interrupt_in < 1) { + dev_err(dev, "required interrupt-in endpoint missing\n"); + return -ENODEV; + } + + return 1; +} + +static bool pl2303_supports_hx_status(struct usb_serial *serial) +{ + int ret; + u8 buf; + + ret = usb_control_msg_recv(serial->dev, 0, VENDOR_READ_REQUEST, + VENDOR_READ_REQUEST_TYPE, PL2303_READ_TYPE_HX_STATUS, + 0, &buf, 1, 100, GFP_KERNEL); + + return ret == 0; +} + +static int pl2303_detect_type(struct usb_serial *serial) +{ + struct usb_device_descriptor *desc = &serial->dev->descriptor; + u16 bcdDevice, bcdUSB; + + /* + * Legacy PL2303H, variants 0 and 1 (difference unknown). + */ + if (desc->bDeviceClass == 0x02) + return TYPE_H; /* variant 0 */ + + if (desc->bMaxPacketSize0 != 0x40) { + if (desc->bDeviceClass == 0x00 || desc->bDeviceClass == 0xff) + return TYPE_H; /* variant 1 */ + + return TYPE_H; /* variant 0 */ + } + + bcdDevice = le16_to_cpu(desc->bcdDevice); + bcdUSB = le16_to_cpu(desc->bcdUSB); + + switch (bcdUSB) { + case 0x101: + /* USB 1.0.1? Let's assume they meant 1.1... */ + fallthrough; + case 0x110: + switch (bcdDevice) { + case 0x300: + return TYPE_HX; + case 0x400: + return TYPE_HXD; + default: + return TYPE_HX; + } + break; + case 0x200: + switch (bcdDevice) { + case 0x100: /* GC */ + case 0x105: + return TYPE_HXN; + case 0x300: /* GT / TA */ + if (pl2303_supports_hx_status(serial)) + return TYPE_TA; + fallthrough; + case 0x305: + case 0x400: /* GL */ + case 0x405: + return TYPE_HXN; + case 0x500: /* GE / TB */ + if (pl2303_supports_hx_status(serial)) + return TYPE_TB; + fallthrough; + case 0x505: + case 0x600: /* GS */ + case 0x605: + case 0x700: /* GR */ + case 0x705: + return TYPE_HXN; + } + break; + } + + dev_err(&serial->interface->dev, + "unknown device type, please report to linux-usb@vger.kernel.org\n"); + return -ENODEV; +} + +static int pl2303_startup(struct usb_serial *serial) +{ + struct pl2303_serial_private *spriv; + enum pl2303_type type; + unsigned char *buf; + int ret; + + ret = pl2303_detect_type(serial); + if (ret < 0) + return ret; + + type = ret; + dev_dbg(&serial->interface->dev, "device type: %s\n", pl2303_type_data[type].name); + + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); + if (!spriv) + return -ENOMEM; + + spriv->type = &pl2303_type_data[type]; + spriv->quirks = (unsigned long)usb_get_serial_data(serial); + spriv->quirks |= spriv->type->quirks; + + usb_set_serial_data(serial, spriv); + + if (type != TYPE_HXN) { + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + kfree(spriv); + return -ENOMEM; + } + + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_write(serial, 0x0404, 0); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_read(serial, 0x8383, buf); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_write(serial, 0x0404, 1); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_read(serial, 0x8383, buf); + pl2303_vendor_write(serial, 0, 1); + pl2303_vendor_write(serial, 1, 0); + if (spriv->quirks & PL2303_QUIRK_LEGACY) + pl2303_vendor_write(serial, 2, 0x24); + else + pl2303_vendor_write(serial, 2, 0x44); + + kfree(buf); + } + + return 0; +} + +static void pl2303_release(struct usb_serial *serial) +{ + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + + kfree(spriv); +} + +static int pl2303_port_probe(struct usb_serial_port *port) +{ + struct pl2303_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + + usb_set_serial_port_data(port, priv); + + port->port.drain_delay = 256; + + return 0; +} + +static void pl2303_port_remove(struct usb_serial_port *port) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + + kfree(priv); +} + +static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) +{ + struct usb_device *dev = port->serial->dev; + int retval; + + dev_dbg(&port->dev, "%s - %02x\n", __func__, value); + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, + value, 0, NULL, 0, 100); + if (retval) + dev_err(&port->dev, "%s - failed: %d\n", __func__, retval); + + return retval; +} + +/* + * Returns the nearest supported baud rate that can be set directly without + * using divisors. + */ +static speed_t pl2303_get_supported_baud_rate(speed_t baud) +{ + static const speed_t baud_sup[] = { + 75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, + 14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800, + 614400, 921600, 1228800, 2457600, 3000000, 6000000 + }; + + unsigned i; + + for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) { + if (baud_sup[i] > baud) + break; + } + + if (i == ARRAY_SIZE(baud_sup)) + baud = baud_sup[i - 1]; + else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1])) + baud = baud_sup[i - 1]; + else + baud = baud_sup[i]; + + return baud; +} + +/* + * NOTE: If unsupported baud rates are set directly, the PL2303 seems to + * use 9600 baud. + */ +static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4], + speed_t baud) +{ + put_unaligned_le32(baud, buf); + + return baud; +} + +static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4], + speed_t baud) +{ + unsigned int baseline, mantissa, exponent; + + /* + * Apparently the formula is: + * baudrate = 12M * 32 / (mantissa * 4^exponent) + * where + * mantissa = buf[8:0] + * exponent = buf[11:9] + */ + baseline = 12000000 * 32; + mantissa = baseline / baud; + if (mantissa == 0) + mantissa = 1; /* Avoid dividing by zero if baud > 32*12M. */ + exponent = 0; + while (mantissa >= 512) { + if (exponent < 7) { + mantissa >>= 2; /* divide by 4 */ + exponent++; + } else { + /* Exponent is maxed. Trim mantissa and leave. */ + mantissa = 511; + break; + } + } + + buf[3] = 0x80; + buf[2] = 0; + buf[1] = exponent << 1 | mantissa >> 8; + buf[0] = mantissa & 0xff; + + /* Calculate and return the exact baud rate. */ + baud = (baseline / mantissa) >> (exponent << 1); + + return baud; +} + +static speed_t pl2303_encode_baud_rate_divisor_alt(unsigned char buf[4], + speed_t baud) +{ + unsigned int baseline, mantissa, exponent; + + /* + * Apparently, for the TA version the formula is: + * baudrate = 12M * 32 / (mantissa * 2^exponent) + * where + * mantissa = buf[10:0] + * exponent = buf[15:13 16] + */ + baseline = 12000000 * 32; + mantissa = baseline / baud; + if (mantissa == 0) + mantissa = 1; /* Avoid dividing by zero if baud > 32*12M. */ + exponent = 0; + while (mantissa >= 2048) { + if (exponent < 15) { + mantissa >>= 1; /* divide by 2 */ + exponent++; + } else { + /* Exponent is maxed. Trim mantissa and leave. */ + mantissa = 2047; + break; + } + } + + buf[3] = 0x80; + buf[2] = exponent & 0x01; + buf[1] = (exponent & ~0x01) << 4 | mantissa >> 8; + buf[0] = mantissa & 0xff; + + /* Calculate and return the exact baud rate. */ + baud = (baseline / mantissa) >> exponent; + + return baud; +} + +static void pl2303_encode_baud_rate(struct tty_struct *tty, + struct usb_serial_port *port, + u8 buf[4]) +{ + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + speed_t baud_sup; + speed_t baud; + + baud = tty_get_baud_rate(tty); + dev_dbg(&port->dev, "baud requested = %u\n", baud); + if (!baud) + return; + + if (spriv->type->max_baud_rate) + baud = min_t(speed_t, baud, spriv->type->max_baud_rate); + /* + * Use direct method for supported baud rates, otherwise use divisors. + * Newer chip types do not support divisor encoding. + */ + if (spriv->type->no_divisors) + baud_sup = baud; + else + baud_sup = pl2303_get_supported_baud_rate(baud); + + if (baud == baud_sup) + baud = pl2303_encode_baud_rate_direct(buf, baud); + else if (spriv->type->alt_divisors) + baud = pl2303_encode_baud_rate_divisor_alt(buf, baud); + else + baud = pl2303_encode_baud_rate_divisor(buf, baud); + + /* Save resulting baud rate */ + tty_encode_baud_rate(tty, baud, baud); + dev_dbg(&port->dev, "baud set = %u\n", baud); +} + +static int pl2303_get_line_request(struct usb_serial_port *port, + unsigned char buf[7]) +{ + struct usb_device *udev = port->serial->dev; + int ret; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + if (ret != 7) { + dev_err(&port->dev, "%s - failed: %d\n", __func__, ret); + + if (ret >= 0) + ret = -EIO; + + return ret; + } + + dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf); + + return 0; +} + +static int pl2303_set_line_request(struct usb_serial_port *port, + unsigned char buf[7]) +{ + struct usb_device *udev = port->serial->dev; + int ret; + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + if (ret < 0) { + dev_err(&port->dev, "%s - failed: %d\n", __func__, ret); + return ret; + } + + dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf); + + return 0; +} + +static bool pl2303_termios_change(const struct ktermios *a, const struct ktermios *b) +{ + bool ixon_change; + + ixon_change = ((a->c_iflag ^ b->c_iflag) & (IXON | IXANY)) || + a->c_cc[VSTART] != b->c_cc[VSTART] || + a->c_cc[VSTOP] != b->c_cc[VSTOP]; + + return tty_termios_hw_change(a, b) || ixon_change; +} + +static bool pl2303_enable_xonxoff(struct tty_struct *tty, const struct pl2303_type_data *type) +{ + if (!I_IXON(tty) || I_IXANY(tty)) + return false; + + if (START_CHAR(tty) != 0x11 || STOP_CHAR(tty) != 0x13) + return false; + + if (type->no_autoxonxoff) + return false; + + return true; +} + +static void pl2303_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned char *buf; + int ret; + u8 control; + + if (old_termios && !pl2303_termios_change(&tty->termios, old_termios)) + return; + + buf = kzalloc(7, GFP_KERNEL); + if (!buf) { + /* Report back no change occurred */ + if (old_termios) + tty->termios = *old_termios; + return; + } + + pl2303_get_line_request(port, buf); + + buf[6] = tty_get_char_size(tty->termios.c_cflag); + dev_dbg(&port->dev, "data bits = %d\n", buf[6]); + + /* For reference buf[0]:buf[3] baud rate value */ + pl2303_encode_baud_rate(tty, port, &buf[0]); + + /* For reference buf[4]=0 is 1 stop bits */ + /* For reference buf[4]=1 is 1.5 stop bits */ + /* For reference buf[4]=2 is 2 stop bits */ + if (C_CSTOPB(tty)) { + /* + * NOTE: Comply with "real" UARTs / RS232: + * use 1.5 instead of 2 stop bits with 5 data bits + */ + if (C_CSIZE(tty) == CS5) { + buf[4] = 1; + dev_dbg(&port->dev, "stop bits = 1.5\n"); + } else { + buf[4] = 2; + dev_dbg(&port->dev, "stop bits = 2\n"); + } + } else { + buf[4] = 0; + dev_dbg(&port->dev, "stop bits = 1\n"); + } + + if (C_PARENB(tty)) { + /* For reference buf[5]=0 is none parity */ + /* For reference buf[5]=1 is odd parity */ + /* For reference buf[5]=2 is even parity */ + /* For reference buf[5]=3 is mark parity */ + /* For reference buf[5]=4 is space parity */ + if (C_PARODD(tty)) { + if (C_CMSPAR(tty)) { + buf[5] = 3; + dev_dbg(&port->dev, "parity = mark\n"); + } else { + buf[5] = 1; + dev_dbg(&port->dev, "parity = odd\n"); + } + } else { + if (C_CMSPAR(tty)) { + buf[5] = 4; + dev_dbg(&port->dev, "parity = space\n"); + } else { + buf[5] = 2; + dev_dbg(&port->dev, "parity = even\n"); + } + } + } else { + buf[5] = 0; + dev_dbg(&port->dev, "parity = none\n"); + } + + /* + * Some PL2303 are known to lose bytes if you change serial settings + * even to the same values as before. Thus we actually need to filter + * in this specific case. + * + * Note that the tty_termios_hw_change check above is not sufficient + * as a previously requested baud rate may differ from the one + * actually used (and stored in old_termios). + * + * NOTE: No additional locking needed for line_settings as it is + * only used in set_termios, which is serialised against itself. + */ + if (!old_termios || memcmp(buf, priv->line_settings, 7)) { + ret = pl2303_set_line_request(port, buf); + if (!ret) + memcpy(priv->line_settings, buf, 7); + } + + /* change control lines if we are switching to or from B0 */ + spin_lock_irqsave(&priv->lock, flags); + control = priv->line_control; + if (C_BAUD(tty) == B0) + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + if (control != priv->line_control) { + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + pl2303_set_control_lines(port, control); + } else { + spin_unlock_irqrestore(&priv->lock, flags); + } + + if (C_CRTSCTS(tty)) { + if (spriv->quirks & PL2303_QUIRK_LEGACY) { + pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x40); + } else if (spriv->type == &pl2303_type_data[TYPE_HXN]) { + pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG, + PL2303_HXN_FLOWCTRL_MASK, + PL2303_HXN_FLOWCTRL_RTS_CTS); + } else { + pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0x60); + } + } else if (pl2303_enable_xonxoff(tty, spriv->type)) { + if (spriv->type == &pl2303_type_data[TYPE_HXN]) { + pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG, + PL2303_HXN_FLOWCTRL_MASK, + PL2303_HXN_FLOWCTRL_XON_XOFF); + } else { + pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0xc0); + } + } else { + if (spriv->type == &pl2303_type_data[TYPE_HXN]) { + pl2303_update_reg(serial, PL2303_HXN_FLOWCTRL_REG, + PL2303_HXN_FLOWCTRL_MASK, + PL2303_HXN_FLOWCTRL_NONE); + } else { + pl2303_update_reg(serial, 0, PL2303_FLOWCTRL_MASK, 0); + } + } + + kfree(buf); +} + +static void pl2303_dtr_rts(struct usb_serial_port *port, int on) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + else + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + pl2303_set_control_lines(port, control); +} + +static void pl2303_close(struct usb_serial_port *port) +{ + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); + pl2303_set_break(port, false); +} + +static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + int result; + + if (spriv->quirks & PL2303_QUIRK_LEGACY) { + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + } else { + /* reset upstream data pipes */ + if (spriv->type == &pl2303_type_data[TYPE_HXN]) { + pl2303_vendor_write(serial, PL2303_HXN_RESET_REG, + PL2303_HXN_RESET_UPSTREAM_PIPE | + PL2303_HXN_RESET_DOWNSTREAM_PIPE); + } else { + pl2303_vendor_write(serial, 8, 0); + pl2303_vendor_write(serial, 9, 0); + } + } + + /* Setup termios */ + if (tty) + pl2303_set_termios(tty, port, NULL); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "failed to submit interrupt urb: %d\n", + result); + return result; + } + + result = usb_serial_generic_open(tty, port); + if (result) { + usb_kill_urb(port->interrupt_in_urb); + return result; + } + + return 0; +} + +static int pl2303_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + int ret; + + spin_lock_irqsave(&priv->lock, flags); + if (set & TIOCM_RTS) + priv->line_control |= CONTROL_RTS; + if (set & TIOCM_DTR) + priv->line_control |= CONTROL_DTR; + if (clear & TIOCM_RTS) + priv->line_control &= ~CONTROL_RTS; + if (clear & TIOCM_DTR) + priv->line_control &= ~CONTROL_DTR; + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + ret = pl2303_set_control_lines(port, control); + if (ret) + return usb_translate_errors(ret); + + return 0; +} + +static int pl2303_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int mcr; + unsigned int status; + unsigned int result; + + spin_lock_irqsave(&priv->lock, flags); + mcr = priv->line_control; + status = priv->line_status; + spin_unlock_irqrestore(&priv->lock, flags); + + result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0) + | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0) + | ((status & UART_CTS) ? TIOCM_CTS : 0) + | ((status & UART_DSR) ? TIOCM_DSR : 0) + | ((status & UART_RING) ? TIOCM_RI : 0) + | ((status & UART_DCD) ? TIOCM_CD : 0); + + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); + + return result; +} + +static int pl2303_carrier_raised(struct usb_serial_port *port) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + + if (priv->line_status & UART_DCD) + return 1; + + return 0; +} + +static void pl2303_set_break(struct usb_serial_port *port, bool enable) +{ + struct usb_serial *serial = port->serial; + u16 state; + int result; + + if (enable) + state = BREAK_ON; + else + state = BREAK_OFF; + + dev_dbg(&port->dev, "%s - turning break %s\n", __func__, + state == BREAK_OFF ? "off" : "on"); + + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + BREAK_REQUEST, BREAK_REQUEST_TYPE, state, + 0, NULL, 0, 100); + if (result) + dev_err(&port->dev, "error sending break = %d\n", result); +} + +static void pl2303_break_ctl(struct tty_struct *tty, int state) +{ + struct usb_serial_port *port = tty->driver_data; + + pl2303_set_break(port, state); +} + +static void pl2303_update_line_status(struct usb_serial_port *port, + unsigned char *data, + unsigned int actual_length) +{ + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + struct pl2303_private *priv = usb_get_serial_port_data(port); + struct tty_struct *tty; + unsigned long flags; + unsigned int status_idx = UART_STATE_INDEX; + u8 status; + u8 delta; + + if (spriv->quirks & PL2303_QUIRK_UART_STATE_IDX0) + status_idx = 0; + + if (actual_length < status_idx + 1) + return; + + status = data[status_idx]; + + /* Save off the uart status for others to look at */ + spin_lock_irqsave(&priv->lock, flags); + delta = priv->line_status ^ status; + priv->line_status = status; + spin_unlock_irqrestore(&priv->lock, flags); + + if (status & UART_BREAK_ERROR) + usb_serial_handle_break(port); + + if (delta & UART_STATE_MSR_MASK) { + if (delta & UART_CTS) + port->icount.cts++; + if (delta & UART_DSR) + port->icount.dsr++; + if (delta & UART_RING) + port->icount.rng++; + if (delta & UART_DCD) { + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) { + usb_serial_handle_dcd_change(port, tty, + status & UART_DCD); + tty_kref_put(tty); + } + } + + wake_up_interruptible(&port->port.delta_msr_wait); + } +} + +static void pl2303_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned int actual_length = urb->actual_length; + int status = urb->status; + int retval; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, urb->transfer_buffer); + + pl2303_update_line_status(port, data, actual_length); + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) { + dev_err(&port->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); + } +} + +static void pl2303_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + char tty_flag = TTY_NORMAL; + unsigned long flags; + u8 line_status; + int i; + + /* update line status */ + spin_lock_irqsave(&priv->lock, flags); + line_status = priv->line_status; + priv->line_status &= ~UART_STATE_TRANSIENT_MASK; + spin_unlock_irqrestore(&priv->lock, flags); + + if (!urb->actual_length) + return; + + /* + * Break takes precedence over parity, which takes precedence over + * framing errors. + */ + if (line_status & UART_BREAK_ERROR) + tty_flag = TTY_BREAK; + else if (line_status & UART_PARITY_ERROR) + tty_flag = TTY_PARITY; + else if (line_status & UART_FRAME_ERROR) + tty_flag = TTY_FRAME; + + if (tty_flag != TTY_NORMAL) + dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, + tty_flag); + /* overrun is special, not associated with a char */ + if (line_status & UART_OVERRUN_ERROR) + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + + if (port->sysrq) { + for (i = 0; i < urb->actual_length; ++i) + if (!usb_serial_handle_sysrq_char(port, data[i])) + tty_insert_flip_char(&port->port, data[i], + tty_flag); + } else { + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, + urb->actual_length); + } + + tty_flip_buffer_push(&port->port); +} + +static struct usb_serial_driver pl2303_device = { + .driver = { + .owner = THIS_MODULE, + .name = "pl2303", + }, + .id_table = id_table, + .num_bulk_in = 1, + .num_bulk_out = 1, + .num_interrupt_in = 0, /* see pl2303_calc_num_ports */ + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = pl2303_open, + .close = pl2303_close, + .dtr_rts = pl2303_dtr_rts, + .carrier_raised = pl2303_carrier_raised, + .break_ctl = pl2303_break_ctl, + .set_termios = pl2303_set_termios, + .tiocmget = pl2303_tiocmget, + .tiocmset = pl2303_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .process_read_urb = pl2303_process_read_urb, + .read_int_callback = pl2303_read_int_callback, + .probe = pl2303_probe, + .calc_num_ports = pl2303_calc_num_ports, + .attach = pl2303_startup, + .release = pl2303_release, + .port_probe = pl2303_port_probe, + .port_remove = pl2303_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &pl2303_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION("Prolific PL2303 USB to serial adaptor driver"); +MODULE_LICENSE("GPL v2"); |