Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 529 insertions, 0 deletions

diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
new file mode 100644
index 000000000..1e1888b66
--- /dev/null
+++ b/drivers/usb/serial/ssu100.c
@@ -0,0 +1,529 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * usb-serial driver for Quatech SSU-100
+ *
+ * based on ftdi_sio.c and the original serqt_usb.c from Quatech
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/uaccess.h>
+
+#define QT_OPEN_CLOSE_CHANNEL       0xca
+#define QT_SET_GET_DEVICE           0xc2
+#define QT_SET_GET_REGISTER         0xc0
+#define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
+#define QT_SET_ATF                  0xcd
+#define QT_GET_SET_UART             0xc1
+#define QT_TRANSFER_IN              0xc0
+#define QT_HW_FLOW_CONTROL_MASK     0xc5
+#define QT_SW_FLOW_CONTROL_MASK     0xc6
+
+#define  SERIAL_MSR_MASK            0xf0
+
+#define  SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
+
+#define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
+
+#define  MAX_BAUD_RATE              460800
+
+#define ATC_DISABLED                0x00
+#define DUPMODE_BITS        0xc0
+#define RR_BITS             0x03
+#define LOOPMODE_BITS       0x41
+#define RS232_MODE          0x00
+#define RTSCTS_TO_CONNECTOR 0x40
+#define CLKS_X4             0x02
+#define FULLPWRBIT          0x00000080
+#define NEXT_BOARD_POWER_BIT        0x00000004
+
+#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"
+
+#define	USB_VENDOR_ID_QUATECH	0x061d	/* Quatech VID */
+#define QUATECH_SSU100	0xC020	/* SSU100 */
+
+static const struct usb_device_id id_table[] = {
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
+	{}			/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ssu100_port_private {
+	spinlock_t status_lock;
+	u8 shadowLSR;
+	u8 shadowMSR;
+};
+
+static inline int ssu100_control_msg(struct usb_device *dev,
+				     u8 request, u16 data, u16 index)
+{
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       request, 0x40, data, index,
+			       NULL, 0, 300);
+}
+
+static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
+{
+	u16 x = ((u16)(data[1] << 8) | (u16)(data[0]));
+
+	return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
+}
+
+
+static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
+{
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_DEVICE, 0xc0, 0, 0,
+			      data, 3, 300);
+	if (ret < 3) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static inline int ssu100_getregister(struct usb_device *dev,
+				     unsigned short uart,
+				     unsigned short reg,
+				     u8 *data)
+{
+	int ret;
+
+	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			      QT_SET_GET_REGISTER, 0xc0, reg,
+			      uart, data, sizeof(*data), 300);
+	if (ret < (int)sizeof(*data)) {
+		if (ret >= 0)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+
+static inline int ssu100_setregister(struct usb_device *dev,
+				     unsigned short uart,
+				     unsigned short reg,
+				     u16 data)
+{
+	u16 value = (data << 8) | reg;
+
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       QT_SET_GET_REGISTER, 0x40, value, uart,
+			       NULL, 0, 300);
+
+}
+
+#define set_mctrl(dev, set)		update_mctrl((dev), (set), 0)
+#define clear_mctrl(dev, clear)	update_mctrl((dev), 0, (clear))
+
+/* these do not deal with device that have more than 1 port */
+static inline int update_mctrl(struct usb_device *dev, unsigned int set,
+			       unsigned int clear)
+{
+	unsigned urb_value;
+	int result;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dev_dbg(&dev->dev, "%s - DTR|RTS not being set|cleared\n", __func__);
+		return 0;	/* no change */
+	}
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	urb_value = 0;
+	if (set & TIOCM_DTR)
+		urb_value |= UART_MCR_DTR;
+	if (set & TIOCM_RTS)
+		urb_value |= UART_MCR_RTS;
+
+	result = ssu100_setregister(dev, 0, UART_MCR, urb_value);
+	if (result < 0)
+		dev_dbg(&dev->dev, "%s Error from MODEM_CTRL urb\n", __func__);
+
+	return result;
+}
+
+static int ssu100_initdevice(struct usb_device *dev)
+{
+	u8 *data;
+	int result = 0;
+
+	data = kzalloc(3, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	result = ssu100_getdevice(dev, data);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result);
+		goto out;
+	}
+
+	data[1] &= ~FULLPWRBIT;
+
+	result = ssu100_setdevice(dev, data);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - set prebuffer level failed %i\n", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - set ATFprebuffer level failed %i\n", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_getdevice(dev, data);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result);
+		goto out;
+	}
+
+	data[0] &= ~(RR_BITS | DUPMODE_BITS);
+	data[0] |= CLKS_X4;
+	data[1] &= ~(LOOPMODE_BITS);
+	data[1] |= RS232_MODE;
+
+	result = ssu100_setdevice(dev, data);
+	if (result < 0) {
+		dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result);
+		goto out;
+	}
+
+out:	kfree(data);
+	return result;
+
+}
+
+
+static void ssu100_set_termios(struct tty_struct *tty,
+		               struct usb_serial_port *port,
+		               const struct ktermios *old_termios)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct ktermios *termios = &tty->termios;
+	u16 baud, divisor, remainder;
+	unsigned int cflag = termios->c_cflag;
+	u16 urb_value = 0; /* will hold the new flags */
+	int result;
+
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			urb_value |= UART_LCR_PARITY;
+		else
+			urb_value |= SERIAL_EVEN_PARITY;
+	}
+
+	urb_value |= UART_LCR_WLEN(tty_get_char_size(cflag));
+
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		baud = 9600;
+
+	dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud);
+
+
+	divisor = MAX_BAUD_RATE / baud;
+	remainder = MAX_BAUD_RATE % baud;
+	if (((remainder * 2) >= baud) && (baud != 110))
+		divisor++;
+
+	urb_value = urb_value << 8;
+
+	result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value);
+	if (result < 0)
+		dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
+
+	if (cflag & CRTSCTS)
+		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					    SERIAL_CRTSCTS, 0);
+	else
+		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					    0, 0);
+	if (result < 0)
+		dev_dbg(&port->dev, "%s - set HW flow control failed\n", __func__);
+
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty)));
+
+		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					    x, 0);
+	} else
+		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					    0, 0);
+
+	if (result < 0)
+		dev_dbg(&port->dev, "%s - set SW flow control failed\n", __func__);
+
+}
+
+
+static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	u8 *data;
+	int result;
+	unsigned long flags;
+
+	data = kzalloc(2, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+				 QT_OPEN_CLOSE_CHANNEL,
+				 QT_TRANSFER_IN, 0x01,
+				 0, data, 2, 300);
+	if (result < 2) {
+		dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result);
+		if (result >= 0)
+			result = -EIO;
+		kfree(data);
+		return result;
+	}
+
+	spin_lock_irqsave(&priv->status_lock, flags);
+	priv->shadowLSR = data[0];
+	priv->shadowMSR = data[1];
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	kfree(data);
+
+/* set to 9600 */
+	result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
+	if (result < 0)
+		dev_dbg(&port->dev, "%s - set uart failed\n", __func__);
+
+	if (tty)
+		ssu100_set_termios(tty, port, &tty->termios);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static int ssu100_attach(struct usb_serial *serial)
+{
+	return ssu100_initdevice(serial->dev);
+}
+
+static int ssu100_port_probe(struct usb_serial_port *port)
+{
+	struct ssu100_port_private *priv;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	spin_lock_init(&priv->status_lock);
+
+	usb_set_serial_port_data(port, priv);
+
+	return 0;
+}
+
+static void ssu100_port_remove(struct usb_serial_port *port)
+{
+	struct ssu100_port_private *priv;
+
+	priv = usb_get_serial_port_data(port);
+	kfree(priv);
+}
+
+static int ssu100_tiocmget(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+	u8 *d;
+	int r;
+
+	d = kzalloc(2, GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	r = ssu100_getregister(dev, 0, UART_MCR, d);
+	if (r < 0)
+		goto mget_out;
+
+	r = ssu100_getregister(dev, 0, UART_MSR, d+1);
+	if (r < 0)
+		goto mget_out;
+
+	r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
+		(d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
+		(d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
+		(d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
+		(d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
+		(d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+mget_out:
+	kfree(d);
+	return r;
+}
+
+static int ssu100_tiocmset(struct tty_struct *tty,
+			   unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+
+	return update_mctrl(dev, set, clear);
+}
+
+static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_device *dev = port->serial->dev;
+
+	/* Disable flow control */
+	if (!on) {
+		if (ssu100_setregister(dev, 0, UART_MCR, 0) < 0)
+			dev_err(&port->dev, "error from flowcontrol urb\n");
+	}
+	/* drop RTS and DTR */
+	if (on)
+		set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+	else
+		clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+}
+
+static void ssu100_update_msr(struct usb_serial_port *port, u8 msr)
+{
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->status_lock, flags);
+	priv->shadowMSR = msr;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	if (msr & UART_MSR_ANY_DELTA) {
+		/* update input line counters */
+		if (msr & UART_MSR_DCTS)
+			port->icount.cts++;
+		if (msr & UART_MSR_DDSR)
+			port->icount.dsr++;
+		if (msr & UART_MSR_DDCD)
+			port->icount.dcd++;
+		if (msr & UART_MSR_TERI)
+			port->icount.rng++;
+		wake_up_interruptible(&port->port.delta_msr_wait);
+	}
+}
+
+static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
+			      char *tty_flag)
+{
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->status_lock, flags);
+	priv->shadowLSR = lsr;
+	spin_unlock_irqrestore(&priv->status_lock, flags);
+
+	*tty_flag = TTY_NORMAL;
+	if (lsr & UART_LSR_BRK_ERROR_BITS) {
+		/* we always want to update icount, but we only want to
+		 * update tty_flag for one case */
+		if (lsr & UART_LSR_BI) {
+			port->icount.brk++;
+			*tty_flag = TTY_BREAK;
+			usb_serial_handle_break(port);
+		}
+		if (lsr & UART_LSR_PE) {
+			port->icount.parity++;
+			if (*tty_flag == TTY_NORMAL)
+				*tty_flag = TTY_PARITY;
+		}
+		if (lsr & UART_LSR_FE) {
+			port->icount.frame++;
+			if (*tty_flag == TTY_NORMAL)
+				*tty_flag = TTY_FRAME;
+		}
+		if (lsr & UART_LSR_OE) {
+			port->icount.overrun++;
+			tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
+		}
+	}
+
+}
+
+static void ssu100_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	char *packet = urb->transfer_buffer;
+	char flag = TTY_NORMAL;
+	u32 len = urb->actual_length;
+	int i;
+	char *ch;
+
+	if ((len >= 4) &&
+	    (packet[0] == 0x1b) && (packet[1] == 0x1b) &&
+	    ((packet[2] == 0x00) || (packet[2] == 0x01))) {
+		if (packet[2] == 0x00)
+			ssu100_update_lsr(port, packet[3], &flag);
+		if (packet[2] == 0x01)
+			ssu100_update_msr(port, packet[3]);
+
+		len -= 4;
+		ch = packet + 4;
+	} else
+		ch = packet;
+
+	if (!len)
+		return;	/* status only */
+
+	if (port->sysrq) {
+		for (i = 0; i < len; i++, ch++) {
+			if (!usb_serial_handle_sysrq_char(port, *ch))
+				tty_insert_flip_char(&port->port, *ch, flag);
+		}
+	} else {
+		tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len);
+	}
+
+	tty_flip_buffer_push(&port->port);
+}
+
+static struct usb_serial_driver ssu100_device = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "ssu100",
+	},
+	.description	     = DRIVER_DESC,
+	.id_table	     = id_table,
+	.num_ports	     = 1,
+	.open		     = ssu100_open,
+	.attach              = ssu100_attach,
+	.port_probe          = ssu100_port_probe,
+	.port_remove         = ssu100_port_remove,
+	.dtr_rts             = ssu100_dtr_rts,
+	.process_read_urb    = ssu100_process_read_urb,
+	.tiocmget            = ssu100_tiocmget,
+	.tiocmset            = ssu100_tiocmset,
+	.tiocmiwait          = usb_serial_generic_tiocmiwait,
+	.get_icount	     = usb_serial_generic_get_icount,
+	.set_termios         = ssu100_set_termios,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+	&ssu100_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");