Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

20 files changed, 6678 insertions, 0 deletions

diff --git a/drivers/video/fbdev/omap/Kconfig b/drivers/video/fbdev/omap/Kconfig
new file mode 100644
index 000000000..b1786cf1b
--- /dev/null
+++ b/drivers/video/fbdev/omap/Kconfig
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config FB_OMAP
+	tristate "OMAP frame buffer support"
+	depends on FB
+	depends on ARCH_OMAP1 || (ARM && COMPILE_TEST)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Frame buffer driver for OMAP based boards.
+
+config FB_OMAP_LCDC_EXTERNAL
+	bool "External LCD controller support"
+	depends on FB_OMAP
+	help
+	  Say Y here, if you want to have support for boards with an
+	  external LCD controller connected to the SoSSI/RFBI interface.
+
+config FB_OMAP_LCDC_HWA742
+	bool "Epson HWA742 LCD controller support"
+	depends on FB_OMAP && FB_OMAP_LCDC_EXTERNAL
+	help
+	  Say Y here if you want to have support for the external
+	  Epson HWA742 LCD controller.
+
+config FB_OMAP_MANUAL_UPDATE
+	bool "Default to manual update mode"
+	depends on FB_OMAP && FB_OMAP_LCDC_EXTERNAL
+	help
+	  Say Y here, if your user-space applications are capable of
+	  notifying the frame buffer driver when a change has occurred in
+	  the frame buffer content and thus a reload of the image data to
+	  the external frame buffer is required. If unsure, say N.
+
+config FB_OMAP_LCD_MIPID
+	bool "MIPI DBI-C/DCS compatible LCD support"
+	depends on FB_OMAP && SPI_MASTER
+	help
+	  Say Y here if you want to have support for LCDs compatible with
+	  the Mobile Industry Processor Interface DBI-C/DCS
+	  specification. (Supported LCDs: Philips LPH8923, Sharp LS041Y3)
+
+config FB_OMAP_LCD_H3
+	bool "TPS65010 LCD controller on OMAP-H3"
+	depends on MACH_OMAP_H3 || COMPILE_TEST
+	depends on TPS65010=y
+	default y
+	help
+	  Say Y here if you want to have support for the LCD on the
+	  H3 board.
+
+config FB_OMAP_DMA_TUNE
+	bool "Set DMA SDRAM access priority high"
+	depends on FB_OMAP
+	help
+	  On systems in which video memory is in system memory
+	  (SDRAM) this will speed up graphics DMA operations.
+	  If you have such a system and want to use rotation
+	  answer yes. Answer no if you have a dedicated video
+	  memory, or don't use any of the accelerated features.
diff --git a/drivers/video/fbdev/omap/Makefile b/drivers/video/fbdev/omap/Makefile
new file mode 100644
index 000000000..b88e02f5c
--- /dev/null
+++ b/drivers/video/fbdev/omap/Makefile
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the OMAP1 framebuffer device driver
+#
+
+obj-$(CONFIG_FB_OMAP) += omapfb.o
+
+ifdef CONFIG_FB_OMAP
+# must be built-in
+obj-y += lcd_dma.o
+endif
+
+objs-yy := omapfb_main.o lcdc.o
+
+objs-y$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
+
+objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
+
+lcds-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
+lcds-y$(CONFIG_FB_OMAP_LCD_H3) += lcd_h3.o
+lcds-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
+lcds-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
+lcds-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
+lcds-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
+lcds-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
+lcds-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
+
+lcds-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
+lcds-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
+
+omapfb-objs := $(objs-yy)
+
+obj-$(CONFIG_FB_OMAP) += $(lcds-yy)
diff --git a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
new file mode 100644
index 000000000..161fc65d6
--- /dev/null
+++ b/drivers/video/fbdev/omap/hwa742.c
@@ -0,0 +1,1057 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Epson HWA742 LCD controller driver
+ *
+ * Copyright (C) 2004-2005 Nokia Corporation
+ * Authors:     Juha Yrjölä   <juha.yrjola@nokia.com>
+ *	        Imre Deak     <imre.deak@nokia.com>
+ * YUV support: Jussi Laako   <jussi.laako@nokia.com>
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+
+#include "omapfb.h"
+
+#define HWA742_REV_CODE_REG       0x0
+#define HWA742_CONFIG_REG         0x2
+#define HWA742_PLL_DIV_REG        0x4
+#define HWA742_PLL_0_REG          0x6
+#define HWA742_PLL_1_REG          0x8
+#define HWA742_PLL_2_REG          0xa
+#define HWA742_PLL_3_REG          0xc
+#define HWA742_PLL_4_REG          0xe
+#define HWA742_CLK_SRC_REG        0x12
+#define HWA742_PANEL_TYPE_REG     0x14
+#define HWA742_H_DISP_REG         0x16
+#define HWA742_H_NDP_REG          0x18
+#define HWA742_V_DISP_1_REG       0x1a
+#define HWA742_V_DISP_2_REG       0x1c
+#define HWA742_V_NDP_REG          0x1e
+#define HWA742_HS_W_REG           0x20
+#define HWA742_HP_S_REG           0x22
+#define HWA742_VS_W_REG           0x24
+#define HWA742_VP_S_REG           0x26
+#define HWA742_PCLK_POL_REG       0x28
+#define HWA742_INPUT_MODE_REG     0x2a
+#define HWA742_TRANSL_MODE_REG1   0x2e
+#define HWA742_DISP_MODE_REG      0x34
+#define HWA742_WINDOW_TYPE        0x36
+#define HWA742_WINDOW_X_START_0   0x38
+#define HWA742_WINDOW_X_START_1   0x3a
+#define HWA742_WINDOW_Y_START_0   0x3c
+#define HWA742_WINDOW_Y_START_1   0x3e
+#define HWA742_WINDOW_X_END_0     0x40
+#define HWA742_WINDOW_X_END_1     0x42
+#define HWA742_WINDOW_Y_END_0     0x44
+#define HWA742_WINDOW_Y_END_1     0x46
+#define HWA742_MEMORY_WRITE_LSB   0x48
+#define HWA742_MEMORY_WRITE_MSB   0x49
+#define HWA742_MEMORY_READ_0      0x4a
+#define HWA742_MEMORY_READ_1      0x4c
+#define HWA742_MEMORY_READ_2      0x4e
+#define HWA742_POWER_SAVE         0x56
+#define HWA742_NDP_CTRL           0x58
+
+#define HWA742_AUTO_UPDATE_TIME		(HZ / 20)
+
+/* Reserve 4 request slots for requests in irq context */
+#define REQ_POOL_SIZE			24
+#define IRQ_REQ_POOL_SIZE		4
+
+#define REQ_FROM_IRQ_POOL 0x01
+
+#define REQ_COMPLETE	0
+#define REQ_PENDING	1
+
+struct update_param {
+	int	x, y, width, height;
+	int	color_mode;
+	int	flags;
+};
+
+struct hwa742_request {
+	struct list_head entry;
+	unsigned int	 flags;
+
+	int		 (*handler)(struct hwa742_request *req);
+	void		 (*complete)(void *data);
+	void		 *complete_data;
+
+	union {
+		struct update_param	update;
+		struct completion	*sync;
+	} par;
+};
+
+struct {
+	enum omapfb_update_mode	update_mode;
+	enum omapfb_update_mode	update_mode_before_suspend;
+
+	struct timer_list	auto_update_timer;
+	int			stop_auto_update;
+	struct omapfb_update_window	auto_update_window;
+	unsigned		te_connected:1;
+	unsigned		vsync_only:1;
+
+	struct hwa742_request	req_pool[REQ_POOL_SIZE];
+	struct list_head	pending_req_list;
+	struct list_head	free_req_list;
+
+	/*
+	 * @req_lock: protect request slots pool and its tracking lists
+	 * @req_sema: counter; slot allocators from task contexts must
+	 *            push it down before acquiring a slot. This
+	 *            guarantees that atomic contexts will always have
+	 *            a minimum of IRQ_REQ_POOL_SIZE slots available.
+	 */
+	struct semaphore	req_sema;
+	spinlock_t		req_lock;
+
+	struct extif_timings	reg_timings, lut_timings;
+
+	int			prev_color_mode;
+	int			prev_flags;
+	int			window_type;
+
+	u32			max_transmit_size;
+	u32			extif_clk_period;
+	unsigned long		pix_tx_time;
+	unsigned long		line_upd_time;
+
+
+	struct omapfb_device	*fbdev;
+	struct lcd_ctrl_extif	*extif;
+	const struct lcd_ctrl	*int_ctrl;
+
+	struct clk		*sys_ck;
+} hwa742;
+
+struct lcd_ctrl hwa742_ctrl;
+
+static u8 hwa742_read_reg(u8 reg)
+{
+	u8 data;
+
+	hwa742.extif->set_bits_per_cycle(8);
+	hwa742.extif->write_command(&reg, 1);
+	hwa742.extif->read_data(&data, 1);
+
+	return data;
+}
+
+static void hwa742_write_reg(u8 reg, u8 data)
+{
+	hwa742.extif->set_bits_per_cycle(8);
+	hwa742.extif->write_command(&reg, 1);
+	hwa742.extif->write_data(&data, 1);
+}
+
+static void set_window_regs(int x_start, int y_start, int x_end, int y_end)
+{
+	u8 tmp[8];
+	u8 cmd;
+
+	x_end--;
+	y_end--;
+	tmp[0] = x_start;
+	tmp[1] = x_start >> 8;
+	tmp[2] = y_start;
+	tmp[3] = y_start >> 8;
+	tmp[4] = x_end;
+	tmp[5] = x_end >> 8;
+	tmp[6] = y_end;
+	tmp[7] = y_end >> 8;
+
+	hwa742.extif->set_bits_per_cycle(8);
+	cmd = HWA742_WINDOW_X_START_0;
+
+	hwa742.extif->write_command(&cmd, 1);
+
+	hwa742.extif->write_data(tmp, 8);
+}
+
+static void set_format_regs(int conv, int transl, int flags)
+{
+	if (flags & OMAPFB_FORMAT_FLAG_DOUBLE) {
+		hwa742.window_type = ((hwa742.window_type & 0xfc) | 0x01);
+#ifdef VERBOSE
+		dev_dbg(hwa742.fbdev->dev, "hwa742: enabled pixel doubling\n");
+#endif
+	} else {
+		hwa742.window_type = (hwa742.window_type & 0xfc);
+#ifdef VERBOSE
+		dev_dbg(hwa742.fbdev->dev, "hwa742: disabled pixel doubling\n");
+#endif
+	}
+
+	hwa742_write_reg(HWA742_INPUT_MODE_REG, conv);
+	hwa742_write_reg(HWA742_TRANSL_MODE_REG1, transl);
+	hwa742_write_reg(HWA742_WINDOW_TYPE, hwa742.window_type);
+}
+
+static void enable_tearsync(int y, int width, int height, int screen_height,
+			    int force_vsync)
+{
+	u8 b;
+
+	b = hwa742_read_reg(HWA742_NDP_CTRL);
+	b |= 1 << 2;
+	hwa742_write_reg(HWA742_NDP_CTRL, b);
+
+	if (likely(hwa742.vsync_only || force_vsync)) {
+		hwa742.extif->enable_tearsync(1, 0);
+		return;
+	}
+
+	if (width * hwa742.pix_tx_time < hwa742.line_upd_time) {
+		hwa742.extif->enable_tearsync(1, 0);
+		return;
+	}
+
+	if ((width * hwa742.pix_tx_time / 1000) * height <
+	    (y + height) * (hwa742.line_upd_time / 1000)) {
+		hwa742.extif->enable_tearsync(1, 0);
+		return;
+	}
+
+	hwa742.extif->enable_tearsync(1, y + 1);
+}
+
+static void disable_tearsync(void)
+{
+	u8 b;
+
+	hwa742.extif->enable_tearsync(0, 0);
+
+	b = hwa742_read_reg(HWA742_NDP_CTRL);
+	b &= ~(1 << 2);
+	hwa742_write_reg(HWA742_NDP_CTRL, b);
+}
+
+static inline struct hwa742_request *alloc_req(bool can_sleep)
+{
+	unsigned long flags;
+	struct hwa742_request *req;
+	int req_flags = 0;
+
+	if (can_sleep)
+		down(&hwa742.req_sema);
+	else
+		req_flags = REQ_FROM_IRQ_POOL;
+
+	spin_lock_irqsave(&hwa742.req_lock, flags);
+	BUG_ON(list_empty(&hwa742.free_req_list));
+	req = list_entry(hwa742.free_req_list.next,
+			 struct hwa742_request, entry);
+	list_del(&req->entry);
+	spin_unlock_irqrestore(&hwa742.req_lock, flags);
+
+	INIT_LIST_HEAD(&req->entry);
+	req->flags = req_flags;
+
+	return req;
+}
+
+static inline void free_req(struct hwa742_request *req)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hwa742.req_lock, flags);
+
+	list_move(&req->entry, &hwa742.free_req_list);
+	if (!(req->flags & REQ_FROM_IRQ_POOL))
+		up(&hwa742.req_sema);
+
+	spin_unlock_irqrestore(&hwa742.req_lock, flags);
+}
+
+static void process_pending_requests(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hwa742.req_lock, flags);
+
+	while (!list_empty(&hwa742.pending_req_list)) {
+		struct hwa742_request *req;
+		void (*complete)(void *);
+		void *complete_data;
+
+		req = list_entry(hwa742.pending_req_list.next,
+				 struct hwa742_request, entry);
+		spin_unlock_irqrestore(&hwa742.req_lock, flags);
+
+		if (req->handler(req) == REQ_PENDING)
+			return;
+
+		complete = req->complete;
+		complete_data = req->complete_data;
+		free_req(req);
+
+		if (complete)
+			complete(complete_data);
+
+		spin_lock_irqsave(&hwa742.req_lock, flags);
+	}
+
+	spin_unlock_irqrestore(&hwa742.req_lock, flags);
+}
+
+static void submit_req_list(struct list_head *head)
+{
+	unsigned long flags;
+	int process = 1;
+
+	spin_lock_irqsave(&hwa742.req_lock, flags);
+	if (likely(!list_empty(&hwa742.pending_req_list)))
+		process = 0;
+	list_splice_init(head, hwa742.pending_req_list.prev);
+	spin_unlock_irqrestore(&hwa742.req_lock, flags);
+
+	if (process)
+		process_pending_requests();
+}
+
+static void request_complete(void *data)
+{
+	struct hwa742_request	*req = (struct hwa742_request *)data;
+	void			(*complete)(void *);
+	void			*complete_data;
+
+	complete = req->complete;
+	complete_data = req->complete_data;
+
+	free_req(req);
+
+	if (complete)
+		complete(complete_data);
+
+	process_pending_requests();
+}
+
+static int send_frame_handler(struct hwa742_request *req)
+{
+	struct update_param *par = &req->par.update;
+	int x = par->x;
+	int y = par->y;
+	int w = par->width;
+	int h = par->height;
+	int bpp;
+	int conv, transl;
+	unsigned long offset;
+	int color_mode = par->color_mode;
+	int flags = par->flags;
+	int scr_width = hwa742.fbdev->panel->x_res;
+	int scr_height = hwa742.fbdev->panel->y_res;
+
+#ifdef VERBOSE
+	dev_dbg(hwa742.fbdev->dev, "x %d y %d w %d h %d scr_width %d "
+		"color_mode %d flags %d\n",
+		x, y, w, h, scr_width, color_mode, flags);
+#endif
+
+	switch (color_mode) {
+	case OMAPFB_COLOR_YUV422:
+		bpp = 16;
+		conv = 0x08;
+		transl = 0x25;
+		break;
+	case OMAPFB_COLOR_YUV420:
+		bpp = 12;
+		conv = 0x09;
+		transl = 0x25;
+		break;
+	case OMAPFB_COLOR_RGB565:
+		bpp = 16;
+		conv = 0x01;
+		transl = 0x05;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (hwa742.prev_flags != flags ||
+	    hwa742.prev_color_mode != color_mode) {
+		set_format_regs(conv, transl, flags);
+		hwa742.prev_color_mode = color_mode;
+		hwa742.prev_flags = flags;
+	}
+	flags = req->par.update.flags;
+	if (flags & OMAPFB_FORMAT_FLAG_TEARSYNC)
+		enable_tearsync(y, scr_width, h, scr_height,
+				flags & OMAPFB_FORMAT_FLAG_FORCE_VSYNC);
+	else
+		disable_tearsync();
+
+	set_window_regs(x, y, x + w, y + h);
+
+	offset = (scr_width * y + x) * bpp / 8;
+
+	hwa742.int_ctrl->setup_plane(OMAPFB_PLANE_GFX,
+			OMAPFB_CHANNEL_OUT_LCD, offset, scr_width, 0, 0, w, h,
+			color_mode);
+
+	hwa742.extif->set_bits_per_cycle(16);
+
+	hwa742.int_ctrl->enable_plane(OMAPFB_PLANE_GFX, 1);
+	hwa742.extif->transfer_area(w, h, request_complete, req);
+
+	return REQ_PENDING;
+}
+
+static void send_frame_complete(void *data)
+{
+	hwa742.int_ctrl->enable_plane(OMAPFB_PLANE_GFX, 0);
+}
+
+#define ADD_PREQ(_x, _y, _w, _h, can_sleep) do {\
+	req = alloc_req(can_sleep);		\
+	req->handler	= send_frame_handler;	\
+	req->complete	= send_frame_complete;	\
+	req->par.update.x = _x;			\
+	req->par.update.y = _y;			\
+	req->par.update.width  = _w;		\
+	req->par.update.height = _h;		\
+	req->par.update.color_mode = color_mode;\
+	req->par.update.flags	  = flags;	\
+	list_add_tail(&req->entry, req_head);	\
+} while(0)
+
+static void create_req_list(struct omapfb_update_window *win,
+			    struct list_head *req_head,
+			    bool can_sleep)
+{
+	struct hwa742_request *req;
+	int x = win->x;
+	int y = win->y;
+	int width = win->width;
+	int height = win->height;
+	int color_mode;
+	int flags;
+
+	flags = win->format & ~OMAPFB_FORMAT_MASK;
+	color_mode = win->format & OMAPFB_FORMAT_MASK;
+
+	if (x & 1) {
+		ADD_PREQ(x, y, 1, height, can_sleep);
+		width--;
+		x++;
+		flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC;
+	}
+	if (width & ~1) {
+		unsigned int xspan = width & ~1;
+		unsigned int ystart = y;
+		unsigned int yspan = height;
+
+		if (xspan * height * 2 > hwa742.max_transmit_size) {
+			yspan = hwa742.max_transmit_size / (xspan * 2);
+			ADD_PREQ(x, ystart, xspan, yspan, can_sleep);
+			ystart += yspan;
+			yspan = height - yspan;
+			flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC;
+		}
+
+		ADD_PREQ(x, ystart, xspan, yspan, can_sleep);
+		x += xspan;
+		width -= xspan;
+		flags &= ~OMAPFB_FORMAT_FLAG_TEARSYNC;
+	}
+	if (width)
+		ADD_PREQ(x, y, 1, height, can_sleep);
+}
+
+static void auto_update_complete(void *data)
+{
+	if (!hwa742.stop_auto_update)
+		mod_timer(&hwa742.auto_update_timer,
+			  jiffies + HWA742_AUTO_UPDATE_TIME);
+}
+
+static void __hwa742_update_window_auto(bool can_sleep)
+{
+	LIST_HEAD(req_list);
+	struct hwa742_request *last;
+
+	create_req_list(&hwa742.auto_update_window, &req_list, can_sleep);
+	last = list_entry(req_list.prev, struct hwa742_request, entry);
+
+	last->complete = auto_update_complete;
+	last->complete_data = NULL;
+
+	submit_req_list(&req_list);
+}
+
+static void hwa742_update_window_auto(struct timer_list *unused)
+{
+	__hwa742_update_window_auto(false);
+}
+
+static int hwa742_update_window_async(struct fb_info *fbi,
+				 struct omapfb_update_window *win,
+				 void (*complete_callback)(void *arg),
+				 void *complete_callback_data)
+{
+	LIST_HEAD(req_list);
+	struct hwa742_request *last;
+	int r = 0;
+
+	if (hwa742.update_mode != OMAPFB_MANUAL_UPDATE) {
+		dev_dbg(hwa742.fbdev->dev, "invalid update mode\n");
+		r = -EINVAL;
+		goto out;
+	}
+	if (unlikely(win->format &
+	    ~(0x03 | OMAPFB_FORMAT_FLAG_DOUBLE |
+	    OMAPFB_FORMAT_FLAG_TEARSYNC | OMAPFB_FORMAT_FLAG_FORCE_VSYNC))) {
+		dev_dbg(hwa742.fbdev->dev, "invalid window flag\n");
+		r = -EINVAL;
+		goto out;
+	}
+
+	create_req_list(win, &req_list, true);
+	last = list_entry(req_list.prev, struct hwa742_request, entry);
+
+	last->complete = complete_callback;
+	last->complete_data = (void *)complete_callback_data;
+
+	submit_req_list(&req_list);
+
+out:
+	return r;
+}
+
+static int hwa742_setup_plane(int plane, int channel_out,
+				  unsigned long offset, int screen_width,
+				  int pos_x, int pos_y, int width, int height,
+				  int color_mode)
+{
+	if (plane != OMAPFB_PLANE_GFX ||
+	    channel_out != OMAPFB_CHANNEL_OUT_LCD)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int hwa742_enable_plane(int plane, int enable)
+{
+	if (plane != 0)
+		return -EINVAL;
+
+	hwa742.int_ctrl->enable_plane(plane, enable);
+
+	return 0;
+}
+
+static int sync_handler(struct hwa742_request *req)
+{
+	complete(req->par.sync);
+	return REQ_COMPLETE;
+}
+
+static void hwa742_sync(void)
+{
+	LIST_HEAD(req_list);
+	struct hwa742_request *req;
+	struct completion comp;
+
+	req = alloc_req(true);
+
+	req->handler = sync_handler;
+	req->complete = NULL;
+	init_completion(&comp);
+	req->par.sync = &comp;
+
+	list_add(&req->entry, &req_list);
+	submit_req_list(&req_list);
+
+	wait_for_completion(&comp);
+}
+
+static void hwa742_bind_client(struct omapfb_notifier_block *nb)
+{
+	dev_dbg(hwa742.fbdev->dev, "update_mode %d\n", hwa742.update_mode);
+	if (hwa742.update_mode == OMAPFB_MANUAL_UPDATE) {
+		omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_READY);
+	}
+}
+
+static int hwa742_set_update_mode(enum omapfb_update_mode mode)
+{
+	if (mode != OMAPFB_MANUAL_UPDATE && mode != OMAPFB_AUTO_UPDATE &&
+	    mode != OMAPFB_UPDATE_DISABLED)
+		return -EINVAL;
+
+	if (mode == hwa742.update_mode)
+		return 0;
+
+	dev_info(hwa742.fbdev->dev, "HWA742: setting update mode to %s\n",
+			mode == OMAPFB_UPDATE_DISABLED ? "disabled" :
+			(mode == OMAPFB_AUTO_UPDATE ? "auto" : "manual"));
+
+	switch (hwa742.update_mode) {
+	case OMAPFB_MANUAL_UPDATE:
+		omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_DISABLED);
+		break;
+	case OMAPFB_AUTO_UPDATE:
+		hwa742.stop_auto_update = 1;
+		del_timer_sync(&hwa742.auto_update_timer);
+		break;
+	case OMAPFB_UPDATE_DISABLED:
+		break;
+	}
+
+	hwa742.update_mode = mode;
+	hwa742_sync();
+	hwa742.stop_auto_update = 0;
+
+	switch (mode) {
+	case OMAPFB_MANUAL_UPDATE:
+		omapfb_notify_clients(hwa742.fbdev, OMAPFB_EVENT_READY);
+		break;
+	case OMAPFB_AUTO_UPDATE:
+		__hwa742_update_window_auto(true);
+		break;
+	case OMAPFB_UPDATE_DISABLED:
+		break;
+	}
+
+	return 0;
+}
+
+static enum omapfb_update_mode hwa742_get_update_mode(void)
+{
+	return hwa742.update_mode;
+}
+
+static unsigned long round_to_extif_ticks(unsigned long ps, int div)
+{
+	int bus_tick = hwa742.extif_clk_period * div;
+	return (ps + bus_tick - 1) / bus_tick * bus_tick;
+}
+
+static int calc_reg_timing(unsigned long sysclk, int div)
+{
+	struct extif_timings *t;
+	unsigned long systim;
+
+	/* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns,
+	 * AccessTime 2 ns + 12.2 ns (regs),
+	 * WEOffTime = WEOnTime + 1 ns,
+	 * REOffTime = REOnTime + 16 ns (regs),
+	 * CSOffTime = REOffTime + 1 ns
+	 * ReadCycle = 2ns + 2*SYSCLK  (regs),
+	 * WriteCycle = 2*SYSCLK + 2 ns,
+	 * CSPulseWidth = 10 ns */
+	systim = 1000000000 / (sysclk / 1000);
+	dev_dbg(hwa742.fbdev->dev, "HWA742 systim %lu ps extif_clk_period %u ps"
+		  "extif_clk_div %d\n", systim, hwa742.extif_clk_period, div);
+
+	t = &hwa742.reg_timings;
+	memset(t, 0, sizeof(*t));
+	t->clk_div = div;
+	t->cs_on_time = 0;
+	t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
+	t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
+	t->access_time = round_to_extif_ticks(t->re_on_time + 12200, div);
+	t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div);
+	t->re_off_time = round_to_extif_ticks(t->re_on_time + 16000, div);
+	t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div);
+	t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
+	if (t->we_cycle_time < t->we_off_time)
+		t->we_cycle_time = t->we_off_time;
+	t->re_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
+	if (t->re_cycle_time < t->re_off_time)
+		t->re_cycle_time = t->re_off_time;
+	t->cs_pulse_width = 0;
+
+	dev_dbg(hwa742.fbdev->dev, "[reg]cson %d csoff %d reon %d reoff %d\n",
+		 t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
+	dev_dbg(hwa742.fbdev->dev, "[reg]weon %d weoff %d recyc %d wecyc %d\n",
+		 t->we_on_time, t->we_off_time, t->re_cycle_time,
+		 t->we_cycle_time);
+	dev_dbg(hwa742.fbdev->dev, "[reg]rdaccess %d cspulse %d\n",
+		 t->access_time, t->cs_pulse_width);
+
+	return hwa742.extif->convert_timings(t);
+}
+
+static int calc_lut_timing(unsigned long sysclk, int div)
+{
+	struct extif_timings *t;
+	unsigned long systim;
+
+	/* CSOnTime 0, WEOnTime 2 ns, REOnTime 2 ns,
+	 * AccessTime 2 ns + 4 * SYSCLK + 26 (lut),
+	 * WEOffTime = WEOnTime + 1 ns,
+	 * REOffTime = REOnTime + 4*SYSCLK + 26 ns (lut),
+	 * CSOffTime = REOffTime + 1 ns
+	 * ReadCycle = 2ns + 4*SYSCLK + 26 ns (lut),
+	 * WriteCycle = 2*SYSCLK + 2 ns,
+	 * CSPulseWidth = 10 ns
+	 */
+	systim = 1000000000 / (sysclk / 1000);
+	dev_dbg(hwa742.fbdev->dev, "HWA742 systim %lu ps extif_clk_period %u ps"
+		  "extif_clk_div %d\n", systim, hwa742.extif_clk_period, div);
+
+	t = &hwa742.lut_timings;
+	memset(t, 0, sizeof(*t));
+
+	t->clk_div = div;
+
+	t->cs_on_time = 0;
+	t->we_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
+	t->re_on_time = round_to_extif_ticks(t->cs_on_time + 2000, div);
+	t->access_time = round_to_extif_ticks(t->re_on_time + 4 * systim +
+					      26000, div);
+	t->we_off_time = round_to_extif_ticks(t->we_on_time + 1000, div);
+	t->re_off_time = round_to_extif_ticks(t->re_on_time + 4 * systim +
+					      26000, div);
+	t->cs_off_time = round_to_extif_ticks(t->re_off_time + 1000, div);
+	t->we_cycle_time = round_to_extif_ticks(2 * systim + 2000, div);
+	if (t->we_cycle_time < t->we_off_time)
+		t->we_cycle_time = t->we_off_time;
+	t->re_cycle_time = round_to_extif_ticks(2000 + 4 * systim + 26000, div);
+	if (t->re_cycle_time < t->re_off_time)
+		t->re_cycle_time = t->re_off_time;
+	t->cs_pulse_width = 0;
+
+	dev_dbg(hwa742.fbdev->dev, "[lut]cson %d csoff %d reon %d reoff %d\n",
+		 t->cs_on_time, t->cs_off_time, t->re_on_time, t->re_off_time);
+	dev_dbg(hwa742.fbdev->dev, "[lut]weon %d weoff %d recyc %d wecyc %d\n",
+		 t->we_on_time, t->we_off_time, t->re_cycle_time,
+		 t->we_cycle_time);
+	dev_dbg(hwa742.fbdev->dev, "[lut]rdaccess %d cspulse %d\n",
+		 t->access_time, t->cs_pulse_width);
+
+	return hwa742.extif->convert_timings(t);
+}
+
+static int calc_extif_timings(unsigned long sysclk, int *extif_mem_div)
+{
+	int max_clk_div;
+	int div;
+
+	hwa742.extif->get_clk_info(&hwa742.extif_clk_period, &max_clk_div);
+	for (div = 1; div < max_clk_div; div++) {
+		if (calc_reg_timing(sysclk, div) == 0)
+			break;
+	}
+	if (div >= max_clk_div)
+		goto err;
+
+	*extif_mem_div = div;
+
+	for (div = 1; div < max_clk_div; div++) {
+		if (calc_lut_timing(sysclk, div) == 0)
+			break;
+	}
+
+	if (div >= max_clk_div)
+		goto err;
+
+	return 0;
+
+err:
+	dev_err(hwa742.fbdev->dev, "can't setup timings\n");
+	return -1;
+}
+
+static void calc_hwa742_clk_rates(unsigned long ext_clk,
+				unsigned long *sys_clk, unsigned long *pix_clk)
+{
+	int pix_clk_src;
+	int sys_div = 0, sys_mul = 0;
+	int pix_div;
+
+	pix_clk_src = hwa742_read_reg(HWA742_CLK_SRC_REG);
+	pix_div = ((pix_clk_src >> 3) & 0x1f) + 1;
+	if ((pix_clk_src & (0x3 << 1)) == 0) {
+		/* Source is the PLL */
+		sys_div = (hwa742_read_reg(HWA742_PLL_DIV_REG) & 0x3f) + 1;
+		sys_mul = (hwa742_read_reg(HWA742_PLL_4_REG) & 0x7f) + 1;
+		*sys_clk = ext_clk * sys_mul / sys_div;
+	} else	/* else source is ext clk, or oscillator */
+		*sys_clk = ext_clk;
+
+	*pix_clk = *sys_clk / pix_div;			/* HZ */
+	dev_dbg(hwa742.fbdev->dev,
+		"ext_clk %ld pix_src %d pix_div %d sys_div %d sys_mul %d\n",
+		ext_clk, pix_clk_src & (0x3 << 1), pix_div, sys_div, sys_mul);
+	dev_dbg(hwa742.fbdev->dev, "sys_clk %ld pix_clk %ld\n",
+		*sys_clk, *pix_clk);
+}
+
+
+static int setup_tearsync(unsigned long pix_clk, int extif_div)
+{
+	int hdisp, vdisp;
+	int hndp, vndp;
+	int hsw, vsw;
+	int hs, vs;
+	int hs_pol_inv, vs_pol_inv;
+	int use_hsvs, use_ndp;
+	u8  b;
+
+	hsw = hwa742_read_reg(HWA742_HS_W_REG);
+	vsw = hwa742_read_reg(HWA742_VS_W_REG);
+	hs_pol_inv = !(hsw & 0x80);
+	vs_pol_inv = !(vsw & 0x80);
+	hsw = hsw & 0x7f;
+	vsw = vsw & 0x3f;
+
+	hdisp = (hwa742_read_reg(HWA742_H_DISP_REG) & 0x7f) * 8;
+	vdisp = hwa742_read_reg(HWA742_V_DISP_1_REG) +
+		((hwa742_read_reg(HWA742_V_DISP_2_REG) & 0x3) << 8);
+
+	hndp = hwa742_read_reg(HWA742_H_NDP_REG) & 0x7f;
+	vndp = hwa742_read_reg(HWA742_V_NDP_REG);
+
+	/* time to transfer one pixel (16bpp) in ps */
+	hwa742.pix_tx_time = hwa742.reg_timings.we_cycle_time;
+	if (hwa742.extif->get_max_tx_rate != NULL) {
+		/*
+		 * The external interface might have a rate limitation,
+		 * if so, we have to maximize our transfer rate.
+		 */
+		unsigned long min_tx_time;
+		unsigned long max_tx_rate = hwa742.extif->get_max_tx_rate();
+
+		dev_dbg(hwa742.fbdev->dev, "max_tx_rate %ld HZ\n",
+			max_tx_rate);
+		min_tx_time = 1000000000 / (max_tx_rate / 1000);  /* ps */
+		if (hwa742.pix_tx_time < min_tx_time)
+			hwa742.pix_tx_time = min_tx_time;
+	}
+
+	/* time to update one line in ps */
+	hwa742.line_upd_time = (hdisp + hndp) * 1000000 / (pix_clk / 1000);
+	hwa742.line_upd_time *= 1000;
+	if (hdisp * hwa742.pix_tx_time > hwa742.line_upd_time)
+		/*
+		 * transfer speed too low, we might have to use both
+		 * HS and VS
+		 */
+		use_hsvs = 1;
+	else
+		/* decent transfer speed, we'll always use only VS */
+		use_hsvs = 0;
+
+	if (use_hsvs && (hs_pol_inv || vs_pol_inv)) {
+		/*
+		 * HS or'ed with VS doesn't work, use the active high
+		 * TE signal based on HNDP / VNDP
+		 */
+		use_ndp = 1;
+		hs_pol_inv = 0;
+		vs_pol_inv = 0;
+		hs = hndp;
+		vs = vndp;
+	} else {
+		/*
+		 * Use HS or'ed with VS as a TE signal if both are needed
+		 * or VNDP if only vsync is needed.
+		 */
+		use_ndp = 0;
+		hs = hsw;
+		vs = vsw;
+		if (!use_hsvs) {
+			hs_pol_inv = 0;
+			vs_pol_inv = 0;
+		}
+	}
+
+	hs = hs * 1000000 / (pix_clk / 1000);			/* ps */
+	hs *= 1000;
+
+	vs = vs * (hdisp + hndp) * 1000000 / (pix_clk / 1000);	/* ps */
+	vs *= 1000;
+
+	if (vs <= hs)
+		return -EDOM;
+	/* set VS to 120% of HS to minimize VS detection time */
+	vs = hs * 12 / 10;
+	/* minimize HS too */
+	hs = 10000;
+
+	b = hwa742_read_reg(HWA742_NDP_CTRL);
+	b &= ~0x3;
+	b |= use_hsvs ? 1 : 0;
+	b |= (use_ndp && use_hsvs) ? 0 : 2;
+	hwa742_write_reg(HWA742_NDP_CTRL, b);
+
+	hwa742.vsync_only = !use_hsvs;
+
+	dev_dbg(hwa742.fbdev->dev,
+		"pix_clk %ld HZ pix_tx_time %ld ps line_upd_time %ld ps\n",
+		pix_clk, hwa742.pix_tx_time, hwa742.line_upd_time);
+	dev_dbg(hwa742.fbdev->dev,
+		"hs %d ps vs %d ps mode %d vsync_only %d\n",
+		hs, vs, (b & 0x3), !use_hsvs);
+
+	return hwa742.extif->setup_tearsync(1, hs, vs,
+					    hs_pol_inv, vs_pol_inv, extif_div);
+}
+
+static void hwa742_get_caps(int plane, struct omapfb_caps *caps)
+{
+	hwa742.int_ctrl->get_caps(plane, caps);
+	caps->ctrl |= OMAPFB_CAPS_MANUAL_UPDATE |
+		      OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE;
+	if (hwa742.te_connected)
+		caps->ctrl |= OMAPFB_CAPS_TEARSYNC;
+	caps->wnd_color |= (1 << OMAPFB_COLOR_RGB565) |
+			   (1 << OMAPFB_COLOR_YUV420);
+}
+
+static void hwa742_suspend(void)
+{
+	hwa742.update_mode_before_suspend = hwa742.update_mode;
+	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
+	/* Enable sleep mode */
+	hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
+	clk_disable(hwa742.sys_ck);
+}
+
+static void hwa742_resume(void)
+{
+	clk_enable(hwa742.sys_ck);
+
+	/* Disable sleep mode */
+	hwa742_write_reg(HWA742_POWER_SAVE, 0);
+	while (1) {
+		/* Loop until PLL output is stabilized */
+		if (hwa742_read_reg(HWA742_PLL_DIV_REG) & (1 << 7))
+			break;
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(msecs_to_jiffies(5));
+	}
+	hwa742_set_update_mode(hwa742.update_mode_before_suspend);
+}
+
+static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
+		       struct omapfb_mem_desc *req_vram)
+{
+	int r = 0, i;
+	u8 rev, conf;
+	unsigned long ext_clk;
+	unsigned long sys_clk, pix_clk;
+	int extif_mem_div;
+	struct omapfb_platform_data *omapfb_conf;
+
+	BUG_ON(!fbdev->ext_if || !fbdev->int_ctrl);
+
+	hwa742.fbdev = fbdev;
+	hwa742.extif = fbdev->ext_if;
+	hwa742.int_ctrl = fbdev->int_ctrl;
+
+	omapfb_conf = dev_get_platdata(fbdev->dev);
+
+	hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
+
+	spin_lock_init(&hwa742.req_lock);
+
+	if ((r = hwa742.int_ctrl->init(fbdev, 1, req_vram)) < 0)
+		goto err1;
+
+	if ((r = hwa742.extif->init(fbdev)) < 0)
+		goto err2;
+
+	ext_clk = clk_get_rate(hwa742.sys_ck);
+	if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
+		goto err3;
+	hwa742.extif->set_timings(&hwa742.reg_timings);
+	clk_prepare_enable(hwa742.sys_ck);
+
+	calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
+	if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
+		goto err4;
+	hwa742.extif->set_timings(&hwa742.reg_timings);
+
+	rev = hwa742_read_reg(HWA742_REV_CODE_REG);
+	if ((rev & 0xfc) != 0x80) {
+		dev_err(fbdev->dev, "HWA742: invalid revision %02x\n", rev);
+		r = -ENODEV;
+		goto err4;
+	}
+
+
+	if (!(hwa742_read_reg(HWA742_PLL_DIV_REG) & 0x80)) {
+		dev_err(fbdev->dev,
+		      "HWA742: controller not initialized by the bootloader\n");
+		r = -ENODEV;
+		goto err4;
+	}
+
+	if ((r = setup_tearsync(pix_clk, extif_mem_div)) < 0) {
+		dev_err(hwa742.fbdev->dev,
+			"HWA742: can't setup tearing synchronization\n");
+		goto err4;
+	}
+	hwa742.te_connected = 1;
+
+	hwa742.max_transmit_size = hwa742.extif->max_transmit_size;
+
+	hwa742.update_mode = OMAPFB_UPDATE_DISABLED;
+
+	hwa742.auto_update_window.x = 0;
+	hwa742.auto_update_window.y = 0;
+	hwa742.auto_update_window.width = fbdev->panel->x_res;
+	hwa742.auto_update_window.height = fbdev->panel->y_res;
+	hwa742.auto_update_window.format = 0;
+
+	timer_setup(&hwa742.auto_update_timer, hwa742_update_window_auto, 0);
+
+	hwa742.prev_color_mode = -1;
+	hwa742.prev_flags = 0;
+
+	hwa742.fbdev = fbdev;
+
+	INIT_LIST_HEAD(&hwa742.free_req_list);
+	INIT_LIST_HEAD(&hwa742.pending_req_list);
+	for (i = 0; i < ARRAY_SIZE(hwa742.req_pool); i++)
+		list_add(&hwa742.req_pool[i].entry, &hwa742.free_req_list);
+	BUG_ON(i <= IRQ_REQ_POOL_SIZE);
+	sema_init(&hwa742.req_sema, i - IRQ_REQ_POOL_SIZE);
+
+	conf = hwa742_read_reg(HWA742_CONFIG_REG);
+	dev_info(fbdev->dev, ": Epson HWA742 LCD controller rev %d "
+			"initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07);
+
+	return 0;
+err4:
+	clk_disable_unprepare(hwa742.sys_ck);
+err3:
+	hwa742.extif->cleanup();
+err2:
+	hwa742.int_ctrl->cleanup();
+err1:
+	return r;
+}
+
+static void hwa742_cleanup(void)
+{
+	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
+	hwa742.extif->cleanup();
+	hwa742.int_ctrl->cleanup();
+	clk_disable_unprepare(hwa742.sys_ck);
+}
+
+struct lcd_ctrl hwa742_ctrl = {
+	.name			= "hwa742",
+	.init			= hwa742_init,
+	.cleanup		= hwa742_cleanup,
+	.bind_client		= hwa742_bind_client,
+	.get_caps		= hwa742_get_caps,
+	.set_update_mode	= hwa742_set_update_mode,
+	.get_update_mode	= hwa742_get_update_mode,
+	.setup_plane		= hwa742_setup_plane,
+	.enable_plane		= hwa742_enable_plane,
+	.update_window		= hwa742_update_window_async,
+	.sync			= hwa742_sync,
+	.suspend		= hwa742_suspend,
+	.resume			= hwa742_resume,
+};
+
diff --git a/drivers/video/fbdev/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
new file mode 100644
index 000000000..6f860c814
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_ams_delta.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Based on drivers/video/omap/lcd_inn1510.c
+ *
+ * LCD panel support for the Amstrad E3 (Delta) videophone.
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/lcd.h>
+
+#include <linux/soc/ti/omap1-io.h>
+
+#include "omapfb.h"
+
+#define AMS_DELTA_DEFAULT_CONTRAST	112
+
+#define AMS_DELTA_MAX_CONTRAST		0x00FF
+#define AMS_DELTA_LCD_POWER		0x0100
+
+
+/* LCD class device section */
+
+static int ams_delta_lcd;
+static struct gpio_desc *gpiod_vblen;
+static struct gpio_desc *gpiod_ndisp;
+
+static int ams_delta_lcd_set_power(struct lcd_device *dev, int power)
+{
+	if (power == FB_BLANK_UNBLANK) {
+		if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER)) {
+			omap_writeb(ams_delta_lcd & AMS_DELTA_MAX_CONTRAST,
+					OMAP_PWL_ENABLE);
+			omap_writeb(1, OMAP_PWL_CLK_ENABLE);
+			ams_delta_lcd |= AMS_DELTA_LCD_POWER;
+		}
+	} else {
+		if (ams_delta_lcd & AMS_DELTA_LCD_POWER) {
+			omap_writeb(0, OMAP_PWL_ENABLE);
+			omap_writeb(0, OMAP_PWL_CLK_ENABLE);
+			ams_delta_lcd &= ~AMS_DELTA_LCD_POWER;
+		}
+	}
+	return 0;
+}
+
+static int ams_delta_lcd_set_contrast(struct lcd_device *dev, int value)
+{
+	if ((value >= 0) && (value <= AMS_DELTA_MAX_CONTRAST)) {
+		omap_writeb(value, OMAP_PWL_ENABLE);
+		ams_delta_lcd &= ~AMS_DELTA_MAX_CONTRAST;
+		ams_delta_lcd |= value;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_LCD_CLASS_DEVICE
+static int ams_delta_lcd_get_power(struct lcd_device *dev)
+{
+	if (ams_delta_lcd & AMS_DELTA_LCD_POWER)
+		return FB_BLANK_UNBLANK;
+	else
+		return FB_BLANK_POWERDOWN;
+}
+
+static int ams_delta_lcd_get_contrast(struct lcd_device *dev)
+{
+	if (!(ams_delta_lcd & AMS_DELTA_LCD_POWER))
+		return 0;
+
+	return ams_delta_lcd & AMS_DELTA_MAX_CONTRAST;
+}
+
+static struct lcd_ops ams_delta_lcd_ops = {
+	.get_power = ams_delta_lcd_get_power,
+	.set_power = ams_delta_lcd_set_power,
+	.get_contrast = ams_delta_lcd_get_contrast,
+	.set_contrast = ams_delta_lcd_set_contrast,
+};
+#endif
+
+
+/* omapfb panel section */
+
+static int ams_delta_panel_enable(struct lcd_panel *panel)
+{
+	gpiod_set_value(gpiod_ndisp, 1);
+	gpiod_set_value(gpiod_vblen, 1);
+	return 0;
+}
+
+static void ams_delta_panel_disable(struct lcd_panel *panel)
+{
+	gpiod_set_value(gpiod_vblen, 0);
+	gpiod_set_value(gpiod_ndisp, 0);
+}
+
+static struct lcd_panel ams_delta_panel = {
+	.name		= "ams-delta",
+	.config		= 0,
+
+	.bpp		= 12,
+	.data_lines	= 16,
+	.x_res		= 480,
+	.y_res		= 320,
+	.pixel_clock	= 4687,
+	.hsw		= 3,
+	.hfp		= 1,
+	.hbp		= 1,
+	.vsw		= 1,
+	.vfp		= 0,
+	.vbp		= 0,
+	.pcd		= 0,
+	.acb		= 37,
+
+	.enable		= ams_delta_panel_enable,
+	.disable	= ams_delta_panel_disable,
+};
+
+
+/* platform driver section */
+
+static int ams_delta_panel_probe(struct platform_device *pdev)
+{
+	struct lcd_device *lcd_device = NULL;
+
+	gpiod_vblen = devm_gpiod_get(&pdev->dev, "vblen", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_vblen))
+		return dev_err_probe(&pdev->dev, PTR_ERR(gpiod_vblen),
+				     "VBLEN GPIO request failed\n");
+
+	gpiod_ndisp = devm_gpiod_get(&pdev->dev, "ndisp", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_ndisp))
+		return dev_err_probe(&pdev->dev, PTR_ERR(gpiod_ndisp),
+				     "NDISP GPIO request failed\n");
+
+#ifdef CONFIG_LCD_CLASS_DEVICE
+	lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL,
+						&ams_delta_lcd_ops);
+
+	if (IS_ERR(lcd_device)) {
+		int ret = PTR_ERR(lcd_device);
+
+		dev_err(&pdev->dev, "failed to register device\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, lcd_device);
+	lcd_device->props.max_contrast = AMS_DELTA_MAX_CONTRAST;
+#endif
+
+	ams_delta_lcd_set_contrast(lcd_device, AMS_DELTA_DEFAULT_CONTRAST);
+	ams_delta_lcd_set_power(lcd_device, FB_BLANK_UNBLANK);
+
+	omapfb_register_panel(&ams_delta_panel);
+	return 0;
+}
+
+static struct platform_driver ams_delta_panel_driver = {
+	.probe		= ams_delta_panel_probe,
+	.driver		= {
+		.name	= "lcd_ams_delta",
+	},
+};
+
+module_platform_driver(ams_delta_panel_driver);
+
+MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>");
+MODULE_DESCRIPTION("LCD panel support for the Amstrad E3 (Delta) videophone");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/lcd_dma.c b/drivers/video/fbdev/omap/lcd_dma.c
new file mode 100644
index 000000000..f85817635
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_dma.c
@@ -0,0 +1,444 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-omap1/lcd_dma.c
+ *
+ * Extracted from arch/arm/plat-omap/dma.c
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Support functions for the OMAP internal DMA channels.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <linux/omap-dma.h>
+
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/soc/ti/omap1-io.h>
+
+#include "lcdc.h"
+#include "lcd_dma.h"
+
+int omap_lcd_dma_running(void)
+{
+	/*
+	 * On OMAP1510, internal LCD controller will start the transfer
+	 * when it gets enabled, so assume DMA running if LCD enabled.
+	 */
+	if (cpu_is_omap15xx())
+		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
+			return 1;
+
+	/* Check if LCD DMA is running */
+	if (cpu_is_omap16xx())
+		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+			return 1;
+
+	return 0;
+}
+
+static struct lcd_dma_info {
+	spinlock_t lock;
+	int reserved;
+	void (*callback)(u16 status, void *data);
+	void *cb_data;
+
+	int active;
+	unsigned long addr;
+	int rotate, data_type, xres, yres;
+	int vxres;
+	int mirror;
+	int xscale, yscale;
+	int ext_ctrl;
+	int src_port;
+	int single_transfer;
+} lcd_dma;
+
+void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+			 int data_type)
+{
+	lcd_dma.addr = addr;
+	lcd_dma.data_type = data_type;
+	lcd_dma.xres = fb_xres;
+	lcd_dma.yres = fb_yres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
+
+void omap_set_lcd_dma_ext_controller(int external)
+{
+	lcd_dma.ext_ctrl = external;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
+
+void omap_set_lcd_dma_single_transfer(int single)
+{
+	lcd_dma.single_transfer = single;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
+
+void omap_set_lcd_dma_b1_rotation(int rotate)
+{
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
+		BUG();
+		return;
+	}
+	lcd_dma.rotate = rotate;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
+
+void omap_set_lcd_dma_b1_mirror(int mirror)
+{
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.mirror = mirror;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
+
+void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
+{
+	if (cpu_is_omap15xx()) {
+		pr_err("DMA virtual resolution is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.vxres = vxres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
+
+void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
+{
+	if (cpu_is_omap15xx()) {
+		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.xscale = xscale;
+	lcd_dma.yscale = yscale;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
+
+static void set_b1_regs(void)
+{
+	unsigned long top, bottom;
+	int es;
+	u16 w;
+	unsigned long en, fn;
+	long ei, fi;
+	unsigned long vxres;
+	unsigned int xscale, yscale;
+
+	switch (lcd_dma.data_type) {
+	case OMAP_DMA_DATA_TYPE_S8:
+		es = 1;
+		break;
+	case OMAP_DMA_DATA_TYPE_S16:
+		es = 2;
+		break;
+	case OMAP_DMA_DATA_TYPE_S32:
+		es = 4;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
+	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
+	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
+	BUG_ON(vxres < lcd_dma.xres);
+
+#define PIXADDR(x, y) (lcd_dma.addr +					\
+		((y) * vxres * yscale + (x) * xscale) * es)
+#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
+	switch (lcd_dma.rotate) {
+	case 0:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			/* 1510 DMA requires the bottom address to be 2 more
+			 * than the actual last memory access location. */
+			if (cpu_is_omap15xx() &&
+				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+					bottom += 2;
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 90:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	case 180:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
+		} else {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 270:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
+		} else {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	default:
+		BUG();
+		return;	/* Suppress warning about uninitialized vars */
+	}
+
+	if (cpu_is_omap15xx()) {
+		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
+		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
+		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
+		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
+
+		return;
+	}
+
+	/* 1610 regs */
+	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
+	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
+	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
+	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
+
+	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
+	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
+	w &= ~0x03;
+	w |= lcd_dma.data_type;
+	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	/* Always set the source port as SDRAM for now*/
+	w &= ~(0x03 << 6);
+	if (lcd_dma.callback != NULL)
+		w |= 1 << 1;		/* Block interrupt enable */
+	else
+		w &= ~(1 << 1);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	if (!(lcd_dma.rotate || lcd_dma.mirror ||
+	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	/* Set the double-indexed addressing mode */
+	w |= (0x03 << 12);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
+	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
+	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
+}
+
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
+{
+	u16 w;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	if (unlikely(!(w & (1 << 3)))) {
+		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
+		return IRQ_NONE;
+	}
+	/* Ack the IRQ */
+	w |= (1 << 3);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	lcd_dma.active = 0;
+	if (lcd_dma.callback != NULL)
+		lcd_dma.callback(w, lcd_dma.cb_data);
+
+	return IRQ_HANDLED;
+}
+
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+			 void *data)
+{
+	spin_lock_irq(&lcd_dma.lock);
+	if (lcd_dma.reserved) {
+		spin_unlock_irq(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA channel already reserved\n");
+		BUG();
+		return -EBUSY;
+	}
+	lcd_dma.reserved = 1;
+	spin_unlock_irq(&lcd_dma.lock);
+	lcd_dma.callback = callback;
+	lcd_dma.cb_data = data;
+	lcd_dma.active = 0;
+	lcd_dma.single_transfer = 0;
+	lcd_dma.rotate = 0;
+	lcd_dma.vxres = 0;
+	lcd_dma.mirror = 0;
+	lcd_dma.xscale = 0;
+	lcd_dma.yscale = 0;
+	lcd_dma.ext_ctrl = 0;
+	lcd_dma.src_port = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_request_lcd_dma);
+
+void omap_free_lcd_dma(void)
+{
+	spin_lock(&lcd_dma.lock);
+	if (!lcd_dma.reserved) {
+		spin_unlock(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA is not reserved\n");
+		BUG();
+		return;
+	}
+	if (!cpu_is_omap15xx())
+		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+			    OMAP1610_DMA_LCD_CCR);
+	lcd_dma.reserved = 0;
+	spin_unlock(&lcd_dma.lock);
+}
+EXPORT_SYMBOL(omap_free_lcd_dma);
+
+void omap_enable_lcd_dma(void)
+{
+	u16 w;
+
+	/*
+	 * Set the Enable bit only if an external controller is
+	 * connected. Otherwise the OMAP internal controller will
+	 * start the transfer when it gets enabled.
+	 */
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w |= 1 << 8;
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	lcd_dma.active = 1;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w |= 1 << 7;
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+}
+EXPORT_SYMBOL(omap_enable_lcd_dma);
+
+void omap_setup_lcd_dma(void)
+{
+	BUG_ON(lcd_dma.active);
+	if (!cpu_is_omap15xx()) {
+		/* Set some reasonable defaults */
+		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
+		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
+		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
+	}
+	set_b1_regs();
+	if (!cpu_is_omap15xx()) {
+		u16 w;
+
+		w = omap_readw(OMAP1610_DMA_LCD_CCR);
+		/*
+		 * If DMA was already active set the end_prog bit to have
+		 * the programmed register set loaded into the active
+		 * register set.
+		 */
+		w |= 1 << 11;		/* End_prog */
+		if (!lcd_dma.single_transfer)
+			w |= (3 << 8);	/* Auto_init, repeat */
+		omap_writew(w, OMAP1610_DMA_LCD_CCR);
+	}
+}
+EXPORT_SYMBOL(omap_setup_lcd_dma);
+
+void omap_stop_lcd_dma(void)
+{
+	u16 w;
+
+	lcd_dma.active = 0;
+	if (cpu_is_omap15xx() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w &= ~(1 << 7);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w &= ~(1 << 8);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+}
+EXPORT_SYMBOL(omap_stop_lcd_dma);
+
+static int __init omap_init_lcd_dma(void)
+{
+	int r;
+
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
+	if (cpu_is_omap16xx()) {
+		u16 w;
+
+		/* this would prevent OMAP sleep */
+		w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+		w &= ~(1 << 8);
+		omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	}
+
+	spin_lock_init(&lcd_dma.lock);
+
+	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+			"LCD DMA", NULL);
+	if (r != 0)
+		pr_err("unable to request IRQ for LCD DMA (error %d)\n", r);
+
+	return r;
+}
+
+arch_initcall(omap_init_lcd_dma);
+
diff --git a/drivers/video/fbdev/omap/lcd_dma.h b/drivers/video/fbdev/omap/lcd_dma.h
new file mode 100644
index 000000000..1b4780197
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_dma.h
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  arch/arm/mach-omap1/include/mach/lcd_dma.h
+ *
+ * Extracted from arch/arm/plat-omap/include/plat/dma.h
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+#ifndef __MACH_OMAP1_LCD_DMA_H__
+#define __MACH_OMAP1_LCD_DMA_H__
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __MACH_OMAP1_LCD_DMA_H__ */
diff --git a/drivers/video/fbdev/omap/lcd_h3.c b/drivers/video/fbdev/omap/lcd_h3.c
new file mode 100644
index 000000000..1766dff76
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_h3.c
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LCD panel support for the TI OMAP H3 board
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tps65010.h>
+#include <linux/gpio.h>
+
+#include "omapfb.h"
+
+#define MODULE_NAME	"omapfb-lcd_h3"
+
+static int h3_panel_enable(struct lcd_panel *panel)
+{
+	int r = 0;
+
+	/* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
+	r = tps65010_set_gpio_out_value(GPIO1, HIGH);
+	if (!r)
+		r = tps65010_set_gpio_out_value(GPIO2, HIGH);
+	if (r)
+		pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
+
+	return r;
+}
+
+static void h3_panel_disable(struct lcd_panel *panel)
+{
+	int r = 0;
+
+	/* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
+	r = tps65010_set_gpio_out_value(GPIO1, LOW);
+	if (!r)
+		tps65010_set_gpio_out_value(GPIO2, LOW);
+	if (r)
+		pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
+}
+
+static struct lcd_panel h3_panel = {
+	.name		= "h3",
+	.config		= OMAP_LCDC_PANEL_TFT,
+
+	.data_lines	= 16,
+	.bpp		= 16,
+	.x_res		= 240,
+	.y_res		= 320,
+	.pixel_clock	= 12000,
+	.hsw		= 12,
+	.hfp		= 14,
+	.hbp		= 72 - 12,
+	.vsw		= 1,
+	.vfp		= 1,
+	.vbp		= 0,
+	.pcd		= 0,
+
+	.enable		= h3_panel_enable,
+	.disable	= h3_panel_disable,
+};
+
+static int h3_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&h3_panel);
+	return 0;
+}
+
+static struct platform_driver h3_panel_driver = {
+	.probe		= h3_panel_probe,
+	.driver		= {
+		.name	= "lcd_h3",
+	},
+};
+
+module_platform_driver(h3_panel_driver);
+
+MODULE_AUTHOR("Imre Deak");
+MODULE_DESCRIPTION("LCD panel support for the TI OMAP H3 board");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/lcd_htcherald.c b/drivers/video/fbdev/omap/lcd_htcherald.c
new file mode 100644
index 000000000..d1c615c51
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_htcherald.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * File: drivers/video/omap/lcd-htcherald.c
+ *
+ * LCD panel support for the HTC Herald
+ *
+ * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
+ * Copyright (C) 2009 Wing Linux
+ *
+ * Based on the lcd_htcwizard.c file from the linwizard project:
+ * Copyright (C) linwizard.sourceforge.net
+ * Author: Angelo Arrifano <miknix@gmail.com>
+ * Based on lcd_h4 by Imre Deak <imre.deak@nokia.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "omapfb.h"
+
+/* Found on WIZ200 (miknix) and some HERA110 models (darkstar62) */
+static struct lcd_panel htcherald_panel_1 = {
+	.name		= "lcd_herald",
+	.config		= OMAP_LCDC_PANEL_TFT |
+			  OMAP_LCDC_INV_HSYNC |
+			  OMAP_LCDC_INV_VSYNC |
+			  OMAP_LCDC_INV_PIX_CLOCK,
+	.bpp		= 16,
+	.data_lines	= 16,
+	.x_res		= 240,
+	.y_res		= 320,
+	.pixel_clock	= 6093,
+	.pcd		= 0, /* 15 */
+	.hsw		= 10,
+	.hfp		= 10,
+	.hbp		= 20,
+	.vsw		= 3,
+	.vfp		= 2,
+	.vbp		= 2,
+};
+
+static int htcherald_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&htcherald_panel_1);
+	return 0;
+}
+
+static struct platform_driver htcherald_panel_driver = {
+	.probe		= htcherald_panel_probe,
+	.driver		= {
+		.name	= "lcd_htcherald",
+	},
+};
+
+module_platform_driver(htcherald_panel_driver);
+
+MODULE_AUTHOR("Cory Maccarrone");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LCD panel support for the HTC Herald");
diff --git a/drivers/video/fbdev/omap/lcd_inn1510.c b/drivers/video/fbdev/omap/lcd_inn1510.c
new file mode 100644
index 000000000..bb915637e
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_inn1510.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LCD panel support for the TI OMAP1510 Innovator board
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/soc/ti/omap1-soc.h>
+
+#include "omapfb.h"
+
+static void __iomem *omap1510_fpga_lcd_panel_control;
+
+static int innovator1510_panel_enable(struct lcd_panel *panel)
+{
+	__raw_writeb(0x7, omap1510_fpga_lcd_panel_control);
+	return 0;
+}
+
+static void innovator1510_panel_disable(struct lcd_panel *panel)
+{
+	__raw_writeb(0x0, omap1510_fpga_lcd_panel_control);
+}
+
+static struct lcd_panel innovator1510_panel = {
+	.name		= "inn1510",
+	.config		= OMAP_LCDC_PANEL_TFT,
+
+	.bpp		= 16,
+	.data_lines	= 16,
+	.x_res		= 240,
+	.y_res		= 320,
+	.pixel_clock	= 12500,
+	.hsw		= 40,
+	.hfp		= 40,
+	.hbp		= 72,
+	.vsw		= 1,
+	.vfp		= 1,
+	.vbp		= 0,
+	.pcd		= 12,
+
+	.enable		= innovator1510_panel_enable,
+	.disable	= innovator1510_panel_disable,
+};
+
+static int innovator1510_panel_probe(struct platform_device *pdev)
+{
+	omap1510_fpga_lcd_panel_control = (void __iomem *)pdev->dev.platform_data;
+	omapfb_register_panel(&innovator1510_panel);
+	return 0;
+}
+
+static struct platform_driver innovator1510_panel_driver = {
+	.probe		= innovator1510_panel_probe,
+	.driver		= {
+		.name	= "lcd_inn1510",
+	},
+};
+
+module_platform_driver(innovator1510_panel_driver);
+
+MODULE_AUTHOR("Imre Deak");
+MODULE_DESCRIPTION("LCD panel support for the TI OMAP1510 Innovator board");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/lcd_inn1610.c b/drivers/video/fbdev/omap/lcd_inn1610.c
new file mode 100644
index 000000000..901b28f35
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_inn1610.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LCD panel support for the TI OMAP1610 Innovator board
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include "omapfb.h"
+
+#define MODULE_NAME	"omapfb-lcd_h3"
+
+static int innovator1610_panel_init(struct lcd_panel *panel,
+				    struct omapfb_device *fbdev)
+{
+	int r = 0;
+
+	/* configure GPIO(14, 15) as outputs */
+	if (gpio_request_one(14, GPIOF_OUT_INIT_LOW, "lcd_en0")) {
+		pr_err(MODULE_NAME ": can't request GPIO 14\n");
+		r = -1;
+		goto exit;
+	}
+	if (gpio_request_one(15, GPIOF_OUT_INIT_LOW, "lcd_en1")) {
+		pr_err(MODULE_NAME ": can't request GPIO 15\n");
+		gpio_free(14);
+		r = -1;
+		goto exit;
+	}
+exit:
+	return r;
+}
+
+static void innovator1610_panel_cleanup(struct lcd_panel *panel)
+{
+	gpio_free(15);
+	gpio_free(14);
+}
+
+static int innovator1610_panel_enable(struct lcd_panel *panel)
+{
+	/* set GPIO14 and GPIO15 high */
+	gpio_set_value(14, 1);
+	gpio_set_value(15, 1);
+	return 0;
+}
+
+static void innovator1610_panel_disable(struct lcd_panel *panel)
+{
+	/* set GPIO13, GPIO14 and GPIO15 low */
+	gpio_set_value(14, 0);
+	gpio_set_value(15, 0);
+}
+
+static struct lcd_panel innovator1610_panel = {
+	.name		= "inn1610",
+	.config		= OMAP_LCDC_PANEL_TFT,
+
+	.bpp		= 16,
+	.data_lines	= 16,
+	.x_res		= 320,
+	.y_res		= 240,
+	.pixel_clock	= 12500,
+	.hsw		= 40,
+	.hfp		= 40,
+	.hbp		= 72,
+	.vsw		= 1,
+	.vfp		= 1,
+	.vbp		= 0,
+	.pcd		= 12,
+
+	.init		= innovator1610_panel_init,
+	.cleanup	= innovator1610_panel_cleanup,
+	.enable		= innovator1610_panel_enable,
+	.disable	= innovator1610_panel_disable,
+};
+
+static int innovator1610_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&innovator1610_panel);
+	return 0;
+}
+
+static struct platform_driver innovator1610_panel_driver = {
+	.probe		= innovator1610_panel_probe,
+	.driver		= {
+		.name	= "lcd_inn1610",
+	},
+};
+
+module_platform_driver(innovator1610_panel_driver);
+
+MODULE_AUTHOR("Imre Deak");
+MODULE_DESCRIPTION("LCD panel support for the TI OMAP1610 Innovator board");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c
new file mode 100644
index 000000000..cc1079aad
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_mipid.c
@@ -0,0 +1,596 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LCD driver for MIPI DBI-C / DCS compatible LCDs
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ */
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include <linux/platform_data/lcd-mipid.h>
+
+#include "omapfb.h"
+
+#define MIPID_MODULE_NAME		"lcd_mipid"
+
+#define MIPID_CMD_READ_DISP_ID		0x04
+#define MIPID_CMD_READ_RED		0x06
+#define MIPID_CMD_READ_GREEN		0x07
+#define MIPID_CMD_READ_BLUE		0x08
+#define MIPID_CMD_READ_DISP_STATUS	0x09
+#define MIPID_CMD_RDDSDR		0x0F
+#define MIPID_CMD_SLEEP_IN		0x10
+#define MIPID_CMD_SLEEP_OUT		0x11
+#define MIPID_CMD_DISP_OFF		0x28
+#define MIPID_CMD_DISP_ON		0x29
+
+#define MIPID_ESD_CHECK_PERIOD		msecs_to_jiffies(5000)
+
+#define to_mipid_device(p)		container_of(p, struct mipid_device, \
+						panel)
+struct mipid_device {
+	int		enabled;
+	int		revision;
+	unsigned int	saved_bklight_level;
+	unsigned long	hw_guard_end;		/* next value of jiffies
+						   when we can issue the
+						   next sleep in/out command */
+	unsigned long	hw_guard_wait;		/* max guard time in jiffies */
+
+	struct omapfb_device	*fbdev;
+	struct spi_device	*spi;
+	struct mutex		mutex;
+	struct lcd_panel	panel;
+
+	struct delayed_work	esd_work;
+	void			(*esd_check)(struct mipid_device *m);
+};
+
+static void mipid_transfer(struct mipid_device *md, int cmd, const u8 *wbuf,
+			   int wlen, u8 *rbuf, int rlen)
+{
+	struct spi_message	m;
+	struct spi_transfer	*x, xfer[4];
+	u16			w;
+	int			r;
+
+	BUG_ON(md->spi == NULL);
+
+	spi_message_init(&m);
+
+	memset(xfer, 0, sizeof(xfer));
+	x = &xfer[0];
+
+	cmd &=  0xff;
+	x->tx_buf		= &cmd;
+	x->bits_per_word	= 9;
+	x->len			= 2;
+	spi_message_add_tail(x, &m);
+
+	if (wlen) {
+		x++;
+		x->tx_buf		= wbuf;
+		x->len			= wlen;
+		x->bits_per_word	= 9;
+		spi_message_add_tail(x, &m);
+	}
+
+	if (rlen) {
+		x++;
+		x->rx_buf	= &w;
+		x->len		= 1;
+		spi_message_add_tail(x, &m);
+
+		if (rlen > 1) {
+			/* Arrange for the extra clock before the first
+			 * data bit.
+			 */
+			x->bits_per_word = 9;
+			x->len		 = 2;
+
+			x++;
+			x->rx_buf	 = &rbuf[1];
+			x->len		 = rlen - 1;
+			spi_message_add_tail(x, &m);
+		}
+	}
+
+	r = spi_sync(md->spi, &m);
+	if (r < 0)
+		dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
+
+	if (rlen)
+		rbuf[0] = w & 0xff;
+}
+
+static inline void mipid_cmd(struct mipid_device *md, int cmd)
+{
+	mipid_transfer(md, cmd, NULL, 0, NULL, 0);
+}
+
+static inline void mipid_write(struct mipid_device *md,
+			       int reg, const u8 *buf, int len)
+{
+	mipid_transfer(md, reg, buf, len, NULL, 0);
+}
+
+static inline void mipid_read(struct mipid_device *md,
+			      int reg, u8 *buf, int len)
+{
+	mipid_transfer(md, reg, NULL, 0, buf, len);
+}
+
+static void set_data_lines(struct mipid_device *md, int data_lines)
+{
+	u16 par;
+
+	switch (data_lines) {
+	case 16:
+		par = 0x150;
+		break;
+	case 18:
+		par = 0x160;
+		break;
+	case 24:
+		par = 0x170;
+		break;
+	}
+	mipid_write(md, 0x3a, (u8 *)&par, 2);
+}
+
+static void send_init_string(struct mipid_device *md)
+{
+	u16 initpar[] = { 0x0102, 0x0100, 0x0100 };
+
+	mipid_write(md, 0xc2, (u8 *)initpar, sizeof(initpar));
+	set_data_lines(md, md->panel.data_lines);
+}
+
+static void hw_guard_start(struct mipid_device *md, int guard_msec)
+{
+	md->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	md->hw_guard_end = jiffies + md->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct mipid_device *md)
+{
+	unsigned long wait = md->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && time_before_eq(wait,  md->hw_guard_wait)) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+static void set_sleep_mode(struct mipid_device *md, int on)
+{
+	int cmd, sleep_time = 50;
+
+	if (on)
+		cmd = MIPID_CMD_SLEEP_IN;
+	else
+		cmd = MIPID_CMD_SLEEP_OUT;
+	hw_guard_wait(md);
+	mipid_cmd(md, cmd);
+	hw_guard_start(md, 120);
+	/*
+	 * When we enable the panel, it seems we _have_ to sleep
+	 * 120 ms before sending the init string. When disabling the
+	 * panel we'll sleep for the duration of 2 frames, so that the
+	 * controller can still provide the PCLK,HS,VS signals.
+	 */
+	if (!on)
+		sleep_time = 120;
+	msleep(sleep_time);
+}
+
+static void set_display_state(struct mipid_device *md, int enabled)
+{
+	int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
+
+	mipid_cmd(md, cmd);
+}
+
+static int mipid_set_bklight_level(struct lcd_panel *panel, unsigned int level)
+{
+	struct mipid_device *md = to_mipid_device(panel);
+	struct mipid_platform_data *pd = md->spi->dev.platform_data;
+
+	if (pd->get_bklight_max == NULL || pd->set_bklight_level == NULL)
+		return -ENODEV;
+	if (level > pd->get_bklight_max(pd))
+		return -EINVAL;
+	if (!md->enabled) {
+		md->saved_bklight_level = level;
+		return 0;
+	}
+	pd->set_bklight_level(pd, level);
+
+	return 0;
+}
+
+static unsigned int mipid_get_bklight_level(struct lcd_panel *panel)
+{
+	struct mipid_device *md = to_mipid_device(panel);
+	struct mipid_platform_data *pd = md->spi->dev.platform_data;
+
+	if (pd->get_bklight_level == NULL)
+		return -ENODEV;
+	return pd->get_bklight_level(pd);
+}
+
+static unsigned int mipid_get_bklight_max(struct lcd_panel *panel)
+{
+	struct mipid_device *md = to_mipid_device(panel);
+	struct mipid_platform_data *pd = md->spi->dev.platform_data;
+
+	if (pd->get_bklight_max == NULL)
+		return -ENODEV;
+
+	return pd->get_bklight_max(pd);
+}
+
+static unsigned long mipid_get_caps(struct lcd_panel *panel)
+{
+	return OMAPFB_CAPS_SET_BACKLIGHT;
+}
+
+static u16 read_first_pixel(struct mipid_device *md)
+{
+	u16 pixel;
+	u8 red, green, blue;
+
+	mutex_lock(&md->mutex);
+	mipid_read(md, MIPID_CMD_READ_RED, &red, 1);
+	mipid_read(md, MIPID_CMD_READ_GREEN, &green, 1);
+	mipid_read(md, MIPID_CMD_READ_BLUE, &blue, 1);
+	mutex_unlock(&md->mutex);
+
+	switch (md->panel.data_lines) {
+	case 16:
+		pixel = ((red >> 1) << 11) | (green << 5) | (blue >> 1);
+		break;
+	case 24:
+		/* 24 bit -> 16 bit */
+		pixel = ((red >> 3) << 11) | ((green >> 2) << 5) |
+			(blue >> 3);
+		break;
+	default:
+		pixel = 0;
+		BUG();
+	}
+
+	return pixel;
+}
+
+static int mipid_run_test(struct lcd_panel *panel, int test_num)
+{
+	struct mipid_device *md = to_mipid_device(panel);
+	static const u16 test_values[4] = {
+		0x0000, 0xffff, 0xaaaa, 0x5555,
+	};
+	int i;
+
+	if (test_num != MIPID_TEST_RGB_LINES)
+		return MIPID_TEST_INVALID;
+
+	for (i = 0; i < ARRAY_SIZE(test_values); i++) {
+		int delay;
+		unsigned long tmo;
+
+		omapfb_write_first_pixel(md->fbdev, test_values[i]);
+		tmo = jiffies + msecs_to_jiffies(100);
+		delay = 25;
+		while (1) {
+			u16 pixel;
+
+			msleep(delay);
+			pixel = read_first_pixel(md);
+			if (pixel == test_values[i])
+				break;
+			if (time_after(jiffies, tmo)) {
+				dev_err(&md->spi->dev,
+					"MIPI LCD RGB I/F test failed: "
+					"expecting %04x, got %04x\n",
+					test_values[i], pixel);
+				return MIPID_TEST_FAILED;
+			}
+			delay = 10;
+		}
+	}
+
+	return 0;
+}
+
+static void ls041y3_esd_recover(struct mipid_device *md)
+{
+	dev_err(&md->spi->dev, "performing LCD ESD recovery\n");
+	set_sleep_mode(md, 1);
+	set_sleep_mode(md, 0);
+}
+
+static void ls041y3_esd_check_mode1(struct mipid_device *md)
+{
+	u8 state1, state2;
+
+	mipid_read(md, MIPID_CMD_RDDSDR, &state1, 1);
+	set_sleep_mode(md, 0);
+	mipid_read(md, MIPID_CMD_RDDSDR, &state2, 1);
+	dev_dbg(&md->spi->dev, "ESD mode 1 state1 %02x state2 %02x\n",
+		state1, state2);
+	/* Each sleep out command will trigger a self diagnostic and flip
+	* Bit6 if the test passes.
+	*/
+	if (!((state1 ^ state2) & (1 << 6)))
+		ls041y3_esd_recover(md);
+}
+
+static void ls041y3_esd_check_mode2(struct mipid_device *md)
+{
+	int i;
+	u8 rbuf[2];
+	static const struct {
+		int	cmd;
+		int	wlen;
+		u16	wbuf[3];
+	} *rd, rd_ctrl[7] = {
+		{ 0xb0, 4, { 0x0101, 0x01fe, } },
+		{ 0xb1, 4, { 0x01de, 0x0121, } },
+		{ 0xc2, 4, { 0x0100, 0x0100, } },
+		{ 0xbd, 2, { 0x0100, } },
+		{ 0xc2, 4, { 0x01fc, 0x0103, } },
+		{ 0xb4, 0, },
+		{ 0x00, 0, },
+	};
+
+	rd = rd_ctrl;
+	for (i = 0; i < 3; i++, rd++)
+		mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen);
+
+	udelay(10);
+	mipid_read(md, rd->cmd, rbuf, 2);
+	rd++;
+
+	for (i = 0; i < 3; i++, rd++) {
+		udelay(10);
+		mipid_write(md, rd->cmd, (u8 *)rd->wbuf, rd->wlen);
+	}
+
+	dev_dbg(&md->spi->dev, "ESD mode 2 state %02x\n", rbuf[1]);
+	if (rbuf[1] == 0x00)
+		ls041y3_esd_recover(md);
+}
+
+static void ls041y3_esd_check(struct mipid_device *md)
+{
+	ls041y3_esd_check_mode1(md);
+	if (md->revision >= 0x88)
+		ls041y3_esd_check_mode2(md);
+}
+
+static void mipid_esd_start_check(struct mipid_device *md)
+{
+	if (md->esd_check != NULL)
+		schedule_delayed_work(&md->esd_work,
+				   MIPID_ESD_CHECK_PERIOD);
+}
+
+static void mipid_esd_stop_check(struct mipid_device *md)
+{
+	if (md->esd_check != NULL)
+		cancel_delayed_work_sync(&md->esd_work);
+}
+
+static void mipid_esd_work(struct work_struct *work)
+{
+	struct mipid_device *md = container_of(work, struct mipid_device,
+					       esd_work.work);
+
+	mutex_lock(&md->mutex);
+	md->esd_check(md);
+	mutex_unlock(&md->mutex);
+	mipid_esd_start_check(md);
+}
+
+static int mipid_enable(struct lcd_panel *panel)
+{
+	struct mipid_device *md = to_mipid_device(panel);
+
+	mutex_lock(&md->mutex);
+
+	if (md->enabled) {
+		mutex_unlock(&md->mutex);
+		return 0;
+	}
+	set_sleep_mode(md, 0);
+	md->enabled = 1;
+	send_init_string(md);
+	set_display_state(md, 1);
+	mipid_set_bklight_level(panel, md->saved_bklight_level);
+	mipid_esd_start_check(md);
+
+	mutex_unlock(&md->mutex);
+	return 0;
+}
+
+static void mipid_disable(struct lcd_panel *panel)
+{
+	struct mipid_device *md = to_mipid_device(panel);
+
+	/*
+	 * A final ESD work might be called before returning,
+	 * so do this without holding the lock.
+	 */
+	mipid_esd_stop_check(md);
+	mutex_lock(&md->mutex);
+
+	if (!md->enabled) {
+		mutex_unlock(&md->mutex);
+		return;
+	}
+	md->saved_bklight_level = mipid_get_bklight_level(panel);
+	mipid_set_bklight_level(panel, 0);
+	set_display_state(md, 0);
+	set_sleep_mode(md, 1);
+	md->enabled = 0;
+
+	mutex_unlock(&md->mutex);
+}
+
+static int panel_enabled(struct mipid_device *md)
+{
+	u32 disp_status;
+	int enabled;
+
+	mipid_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
+	disp_status = __be32_to_cpu(disp_status);
+	enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
+	dev_dbg(&md->spi->dev,
+		"LCD panel %senabled by bootloader (status 0x%04x)\n",
+		enabled ? "" : "not ", disp_status);
+	return enabled;
+}
+
+static int mipid_init(struct lcd_panel *panel,
+			    struct omapfb_device *fbdev)
+{
+	struct mipid_device *md = to_mipid_device(panel);
+
+	md->fbdev = fbdev;
+	INIT_DELAYED_WORK(&md->esd_work, mipid_esd_work);
+	mutex_init(&md->mutex);
+
+	md->enabled = panel_enabled(md);
+
+	if (md->enabled)
+		mipid_esd_start_check(md);
+	else
+		md->saved_bklight_level = mipid_get_bklight_level(panel);
+
+	return 0;
+}
+
+static void mipid_cleanup(struct lcd_panel *panel)
+{
+	struct mipid_device *md = to_mipid_device(panel);
+
+	if (md->enabled)
+		mipid_esd_stop_check(md);
+}
+
+static const struct lcd_panel mipid_panel = {
+	.config		= OMAP_LCDC_PANEL_TFT,
+
+	.bpp		= 16,
+	.x_res		= 800,
+	.y_res		= 480,
+	.pixel_clock	= 21940,
+	.hsw		= 50,
+	.hfp		= 20,
+	.hbp		= 15,
+	.vsw		= 2,
+	.vfp		= 1,
+	.vbp		= 3,
+
+	.init			= mipid_init,
+	.cleanup		= mipid_cleanup,
+	.enable			= mipid_enable,
+	.disable		= mipid_disable,
+	.get_caps		= mipid_get_caps,
+	.set_bklight_level	= mipid_set_bklight_level,
+	.get_bklight_level	= mipid_get_bklight_level,
+	.get_bklight_max	= mipid_get_bklight_max,
+	.run_test		= mipid_run_test,
+};
+
+static int mipid_detect(struct mipid_device *md)
+{
+	struct mipid_platform_data *pdata;
+	u8 display_id[3];
+
+	pdata = md->spi->dev.platform_data;
+	if (pdata == NULL) {
+		dev_err(&md->spi->dev, "missing platform data\n");
+		return -ENOENT;
+	}
+
+	mipid_read(md, MIPID_CMD_READ_DISP_ID, display_id, 3);
+	dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
+		display_id[0], display_id[1], display_id[2]);
+
+	switch (display_id[0]) {
+	case 0x45:
+		md->panel.name = "lph8923";
+		break;
+	case 0x83:
+		md->panel.name = "ls041y3";
+		md->esd_check = ls041y3_esd_check;
+		break;
+	default:
+		md->panel.name = "unknown";
+		dev_err(&md->spi->dev, "invalid display ID\n");
+		return -ENODEV;
+	}
+
+	md->revision = display_id[1];
+	md->panel.data_lines = pdata->data_lines;
+	pr_info("omapfb: %s rev %02x LCD detected, %d data lines\n",
+			md->panel.name, md->revision, md->panel.data_lines);
+
+	return 0;
+}
+
+static int mipid_spi_probe(struct spi_device *spi)
+{
+	struct mipid_device *md;
+	int r;
+
+	md = kzalloc(sizeof(*md), GFP_KERNEL);
+	if (md == NULL) {
+		dev_err(&spi->dev, "out of memory\n");
+		return -ENOMEM;
+	}
+
+	spi->mode = SPI_MODE_0;
+	md->spi = spi;
+	dev_set_drvdata(&spi->dev, md);
+	md->panel = mipid_panel;
+
+	r = mipid_detect(md);
+	if (r < 0)
+		goto free_md;
+
+	omapfb_register_panel(&md->panel);
+
+	return 0;
+
+free_md:
+	kfree(md);
+	return r;
+}
+
+static void mipid_spi_remove(struct spi_device *spi)
+{
+	struct mipid_device *md = dev_get_drvdata(&spi->dev);
+
+	mipid_disable(&md->panel);
+	kfree(md);
+}
+
+static struct spi_driver mipid_spi_driver = {
+	.driver = {
+		.name	= MIPID_MODULE_NAME,
+	},
+	.probe	= mipid_spi_probe,
+	.remove	= mipid_spi_remove,
+};
+
+module_spi_driver(mipid_spi_driver);
+
+MODULE_DESCRIPTION("MIPI display driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c
new file mode 100644
index 000000000..8168ba0d4
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_osk.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LCD panel support for the TI OMAP OSK board
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ * Adapted for OSK by <dirk.behme@de.bosch.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-mux.h>
+
+#include "omapfb.h"
+
+static int osk_panel_enable(struct lcd_panel *panel)
+{
+	/* configure PWL pin */
+	omap_cfg_reg(PWL);
+
+	/* Enable PWL unit */
+	omap_writeb(0x01, OMAP_PWL_CLK_ENABLE);
+
+	/* Set PWL level */
+	omap_writeb(0xFF, OMAP_PWL_ENABLE);
+
+	/* set GPIO2 high (lcd power enabled) */
+	gpio_set_value(2, 1);
+
+	return 0;
+}
+
+static void osk_panel_disable(struct lcd_panel *panel)
+{
+	/* Set PWL level to zero */
+	omap_writeb(0x00, OMAP_PWL_ENABLE);
+
+	/* Disable PWL unit */
+	omap_writeb(0x00, OMAP_PWL_CLK_ENABLE);
+
+	/* set GPIO2 low */
+	gpio_set_value(2, 0);
+}
+
+static struct lcd_panel osk_panel = {
+	.name		= "osk",
+	.config		= OMAP_LCDC_PANEL_TFT,
+
+	.bpp		= 16,
+	.data_lines	= 16,
+	.x_res		= 240,
+	.y_res		= 320,
+	.pixel_clock	= 12500,
+	.hsw		= 40,
+	.hfp		= 40,
+	.hbp		= 72,
+	.vsw		= 1,
+	.vfp		= 1,
+	.vbp		= 0,
+	.pcd		= 12,
+
+	.enable		= osk_panel_enable,
+	.disable	= osk_panel_disable,
+};
+
+static int osk_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&osk_panel);
+	return 0;
+}
+
+static struct platform_driver osk_panel_driver = {
+	.probe		= osk_panel_probe,
+	.driver		= {
+		.name	= "lcd_osk",
+	},
+};
+
+module_platform_driver(osk_panel_driver);
+
+MODULE_AUTHOR("Imre Deak");
+MODULE_DESCRIPTION("LCD panel support for the TI OMAP OSK board");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/lcd_palmte.c b/drivers/video/fbdev/omap/lcd_palmte.c
new file mode 100644
index 000000000..b255158d7
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_palmte.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LCD panel support for the Palm Tungsten E
+ *
+ * Original version : Romain Goyet <r.goyet@gmail.com>
+ * Current version : Laurent Gonzalez <palmte.linux@free.fr>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include "omapfb.h"
+
+static struct lcd_panel palmte_panel = {
+	.name		= "palmte",
+	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+			  OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
+			  OMAP_LCDC_HSVS_OPPOSITE,
+
+	.data_lines	= 16,
+	.bpp		= 8,
+	.pixel_clock	= 12000,
+	.x_res		= 320,
+	.y_res		= 320,
+	.hsw		= 4,
+	.hfp		= 8,
+	.hbp		= 28,
+	.vsw		= 1,
+	.vfp		= 8,
+	.vbp		= 7,
+	.pcd		= 0,
+};
+
+static int palmte_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&palmte_panel);
+	return 0;
+}
+
+static struct platform_driver palmte_panel_driver = {
+	.probe		= palmte_panel_probe,
+	.driver		= {
+		.name	= "lcd_palmte",
+	},
+};
+
+module_platform_driver(palmte_panel_driver);
+
+MODULE_AUTHOR("Romain Goyet <r.goyet@gmail.com>, Laurent Gonzalez <palmte.linux@free.fr>");
+MODULE_DESCRIPTION("LCD panel support for the Palm Tungsten E");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/lcd_palmtt.c b/drivers/video/fbdev/omap/lcd_palmtt.c
new file mode 100644
index 000000000..703af0bc5
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_palmtt.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LCD panel support for Palm Tungsten|T
+ * Current version : Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Modified from lcd_inn1510.c
+ */
+
+/*
+GPIO11 - backlight
+GPIO12 - screen blanking
+GPIO13 - screen blanking
+*/
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include "omapfb.h"
+
+static unsigned long palmtt_panel_get_caps(struct lcd_panel *panel)
+{
+	return OMAPFB_CAPS_SET_BACKLIGHT;
+}
+
+static struct lcd_panel palmtt_panel = {
+	.name		= "palmtt",
+	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+			OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
+			OMAP_LCDC_HSVS_OPPOSITE,
+	.bpp		= 16,
+	.data_lines	= 16,
+	.x_res		= 320,
+	.y_res		= 320,
+	.pixel_clock	= 10000,
+	.hsw		= 4,
+	.hfp		= 8,
+	.hbp		= 28,
+	.vsw		= 1,
+	.vfp		= 8,
+	.vbp		= 7,
+	.pcd		= 0,
+
+	.get_caps	= palmtt_panel_get_caps,
+};
+
+static int palmtt_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&palmtt_panel);
+	return 0;
+}
+
+static struct platform_driver palmtt_panel_driver = {
+	.probe		= palmtt_panel_probe,
+	.driver		= {
+		.name	= "lcd_palmtt",
+	},
+};
+
+module_platform_driver(palmtt_panel_driver);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("LCD panel support for Palm Tungsten|T");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/lcd_palmz71.c b/drivers/video/fbdev/omap/lcd_palmz71.c
new file mode 100644
index 000000000..a955c908a
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcd_palmz71.c
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LCD panel support for the Palm Zire71
+ *
+ * Original version : Romain Goyet
+ * Current version : Laurent Gonzalez
+ * Modified for zire71 : Marek Vasut
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include "omapfb.h"
+
+static unsigned long palmz71_panel_get_caps(struct lcd_panel *panel)
+{
+	return OMAPFB_CAPS_SET_BACKLIGHT;
+}
+
+static struct lcd_panel palmz71_panel = {
+	.name		= "palmz71",
+	.config		= OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
+			  OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
+			  OMAP_LCDC_HSVS_OPPOSITE,
+	.data_lines	= 16,
+	.bpp		= 16,
+	.pixel_clock	= 24000,
+	.x_res		= 320,
+	.y_res		= 320,
+	.hsw		= 4,
+	.hfp		= 8,
+	.hbp		= 28,
+	.vsw		= 1,
+	.vfp		= 8,
+	.vbp		= 7,
+	.pcd		= 0,
+
+	.get_caps	= palmz71_panel_get_caps,
+};
+
+static int palmz71_panel_probe(struct platform_device *pdev)
+{
+	omapfb_register_panel(&palmz71_panel);
+	return 0;
+}
+
+static struct platform_driver palmz71_panel_driver = {
+	.probe		= palmz71_panel_probe,
+	.driver		= {
+		.name	= "lcd_palmz71",
+	},
+};
+
+module_platform_driver(palmz71_panel_driver);
+
+MODULE_AUTHOR("Romain Goyet, Laurent Gonzalez, Marek Vasut");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("LCD panel support for the Palm Zire71");
diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
new file mode 100644
index 000000000..e7ce783e5
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcdc.c
@@ -0,0 +1,782 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OMAP1 internal LCD controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ */
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/err.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <linux/clk.h>
+#include <linux/gfp.h>
+
+#include <linux/soc/ti/omap1-io.h>
+#include <linux/soc/ti/omap1-soc.h>
+#include <linux/omap-dma.h>
+
+#include <asm/mach-types.h>
+
+#include "omapfb.h"
+
+#include "lcdc.h"
+#include "lcd_dma.h"
+
+#define MODULE_NAME			"lcdc"
+
+#define MAX_PALETTE_SIZE		PAGE_SIZE
+
+enum lcdc_load_mode {
+	OMAP_LCDC_LOAD_PALETTE,
+	OMAP_LCDC_LOAD_FRAME,
+	OMAP_LCDC_LOAD_PALETTE_AND_FRAME
+};
+
+static struct omap_lcd_controller {
+	enum omapfb_update_mode	update_mode;
+	int			ext_mode;
+
+	unsigned long		frame_offset;
+	int			screen_width;
+	int			xres;
+	int			yres;
+
+	enum omapfb_color_format	color_mode;
+	int			bpp;
+	void			*palette_virt;
+	dma_addr_t		palette_phys;
+	int			palette_code;
+	int			palette_size;
+
+	unsigned int		irq_mask;
+	struct completion	last_frame_complete;
+	struct completion	palette_load_complete;
+	struct clk		*lcd_ck;
+	struct omapfb_device	*fbdev;
+
+	void			(*dma_callback)(void *data);
+	void			*dma_callback_data;
+
+	dma_addr_t		vram_phys;
+	void			*vram_virt;
+	unsigned long		vram_size;
+} lcdc;
+
+static inline void enable_irqs(int mask)
+{
+	lcdc.irq_mask |= mask;
+}
+
+static inline void disable_irqs(int mask)
+{
+	lcdc.irq_mask &= ~mask;
+}
+
+static void set_load_mode(enum lcdc_load_mode mode)
+{
+	u32 l;
+
+	l = omap_readl(OMAP_LCDC_CONTROL);
+	l &= ~(3 << 20);
+	switch (mode) {
+	case OMAP_LCDC_LOAD_PALETTE:
+		l |= 1 << 20;
+		break;
+	case OMAP_LCDC_LOAD_FRAME:
+		l |= 2 << 20;
+		break;
+	case OMAP_LCDC_LOAD_PALETTE_AND_FRAME:
+		break;
+	default:
+		BUG();
+	}
+	omap_writel(l, OMAP_LCDC_CONTROL);
+}
+
+static void enable_controller(void)
+{
+	u32 l;
+
+	l = omap_readl(OMAP_LCDC_CONTROL);
+	l |= OMAP_LCDC_CTRL_LCD_EN;
+	l &= ~OMAP_LCDC_IRQ_MASK;
+	l |= lcdc.irq_mask | OMAP_LCDC_IRQ_DONE;	/* enabled IRQs */
+	omap_writel(l, OMAP_LCDC_CONTROL);
+}
+
+static void disable_controller_async(void)
+{
+	u32 l;
+	u32 mask;
+
+	l = omap_readl(OMAP_LCDC_CONTROL);
+	mask = OMAP_LCDC_CTRL_LCD_EN | OMAP_LCDC_IRQ_MASK;
+	/*
+	 * Preserve the DONE mask, since we still want to get the
+	 * final DONE irq. It will be disabled in the IRQ handler.
+	 */
+	mask &= ~OMAP_LCDC_IRQ_DONE;
+	l &= ~mask;
+	omap_writel(l, OMAP_LCDC_CONTROL);
+}
+
+static void disable_controller(void)
+{
+	init_completion(&lcdc.last_frame_complete);
+	disable_controller_async();
+	if (!wait_for_completion_timeout(&lcdc.last_frame_complete,
+				msecs_to_jiffies(500)))
+		dev_err(lcdc.fbdev->dev, "timeout waiting for FRAME DONE\n");
+}
+
+static void reset_controller(u32 status)
+{
+	static unsigned long reset_count;
+	static unsigned long last_jiffies;
+
+	disable_controller_async();
+	reset_count++;
+	if (reset_count == 1 || time_after(jiffies, last_jiffies + HZ)) {
+		dev_err(lcdc.fbdev->dev,
+			  "resetting (status %#010x,reset count %lu)\n",
+			  status, reset_count);
+		last_jiffies = jiffies;
+	}
+	if (reset_count < 100) {
+		enable_controller();
+	} else {
+		reset_count = 0;
+		dev_err(lcdc.fbdev->dev,
+			"too many reset attempts, giving up.\n");
+	}
+}
+
+/*
+ * Configure the LCD DMA according to the current mode specified by parameters
+ * in lcdc.fbdev and fbdev->var.
+ */
+static void setup_lcd_dma(void)
+{
+	static const int dma_elem_type[] = {
+		0,
+		OMAP_DMA_DATA_TYPE_S8,
+		OMAP_DMA_DATA_TYPE_S16,
+		0,
+		OMAP_DMA_DATA_TYPE_S32,
+	};
+	struct omapfb_plane_struct *plane = lcdc.fbdev->fb_info[0]->par;
+	struct fb_var_screeninfo *var = &lcdc.fbdev->fb_info[0]->var;
+	unsigned long	src;
+	int		esize, xelem, yelem;
+
+	src = lcdc.vram_phys + lcdc.frame_offset;
+
+	switch (var->rotate) {
+	case 0:
+		if (plane->info.mirror || (src & 3) ||
+		    lcdc.color_mode == OMAPFB_COLOR_YUV420 ||
+		    (lcdc.xres & 1))
+			esize = 2;
+		else
+			esize = 4;
+		xelem = lcdc.xres * lcdc.bpp / 8 / esize;
+		yelem = lcdc.yres;
+		break;
+	case 90:
+	case 180:
+	case 270:
+		if (cpu_is_omap15xx()) {
+			BUG();
+		}
+		esize = 2;
+		xelem = lcdc.yres * lcdc.bpp / 16;
+		yelem = lcdc.xres;
+		break;
+	default:
+		BUG();
+		return;
+	}
+#ifdef VERBOSE
+	dev_dbg(lcdc.fbdev->dev,
+		 "setup_dma: src %#010lx esize %d xelem %d yelem %d\n",
+		 src, esize, xelem, yelem);
+#endif
+	omap_set_lcd_dma_b1(src, xelem, yelem, dma_elem_type[esize]);
+	if (!cpu_is_omap15xx()) {
+		int bpp = lcdc.bpp;
+
+		/*
+		 * YUV support is only for external mode when we have the
+		 * YUV window embedded in a 16bpp frame buffer.
+		 */
+		if (lcdc.color_mode == OMAPFB_COLOR_YUV420)
+			bpp = 16;
+		/* Set virtual xres elem size */
+		omap_set_lcd_dma_b1_vxres(
+			lcdc.screen_width * bpp / 8 / esize);
+		/* Setup transformations */
+		omap_set_lcd_dma_b1_rotation(var->rotate);
+		omap_set_lcd_dma_b1_mirror(plane->info.mirror);
+	}
+	omap_setup_lcd_dma();
+}
+
+static irqreturn_t lcdc_irq_handler(int irq, void *dev_id)
+{
+	u32 status;
+
+	status = omap_readl(OMAP_LCDC_STATUS);
+
+	if (status & (OMAP_LCDC_STAT_FUF | OMAP_LCDC_STAT_SYNC_LOST))
+		reset_controller(status);
+	else {
+		if (status & OMAP_LCDC_STAT_DONE) {
+			u32 l;
+
+			/*
+			 * Disable IRQ_DONE. The status bit will be cleared
+			 * only when the controller is reenabled and we don't
+			 * want to get more interrupts.
+			 */
+			l = omap_readl(OMAP_LCDC_CONTROL);
+			l &= ~OMAP_LCDC_IRQ_DONE;
+			omap_writel(l, OMAP_LCDC_CONTROL);
+			complete(&lcdc.last_frame_complete);
+		}
+		if (status & OMAP_LCDC_STAT_LOADED_PALETTE) {
+			disable_controller_async();
+			complete(&lcdc.palette_load_complete);
+		}
+	}
+
+	/*
+	 * Clear these interrupt status bits.
+	 * Sync_lost, FUF bits were cleared by disabling the LCD controller
+	 * LOADED_PALETTE can be cleared this way only in palette only
+	 * load mode. In other load modes it's cleared by disabling the
+	 * controller.
+	 */
+	status &= ~(OMAP_LCDC_STAT_VSYNC |
+		    OMAP_LCDC_STAT_LOADED_PALETTE |
+		    OMAP_LCDC_STAT_ABC |
+		    OMAP_LCDC_STAT_LINE_INT);
+	omap_writel(status, OMAP_LCDC_STATUS);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Change to a new video mode. We defer this to a later time to avoid any
+ * flicker and not to mess up the current LCD DMA context. For this we disable
+ * the LCD controller, which will generate a DONE irq after the last frame has
+ * been transferred. Then it'll be safe to reconfigure both the LCD controller
+ * as well as the LCD DMA.
+ */
+static int omap_lcdc_setup_plane(int plane, int channel_out,
+				 unsigned long offset, int screen_width,
+				 int pos_x, int pos_y, int width, int height,
+				 int color_mode)
+{
+	struct fb_var_screeninfo *var = &lcdc.fbdev->fb_info[0]->var;
+	struct lcd_panel *panel = lcdc.fbdev->panel;
+	int rot_x, rot_y;
+
+	if (var->rotate == 0) {
+		rot_x = panel->x_res;
+		rot_y = panel->y_res;
+	} else {
+		rot_x = panel->y_res;
+		rot_y = panel->x_res;
+	}
+	if (plane != 0 || channel_out != 0 || pos_x != 0 || pos_y != 0 ||
+	    width > rot_x || height > rot_y) {
+#ifdef VERBOSE
+		dev_dbg(lcdc.fbdev->dev,
+			"invalid plane params plane %d pos_x %d pos_y %d "
+			"w %d h %d\n", plane, pos_x, pos_y, width, height);
+#endif
+		return -EINVAL;
+	}
+
+	lcdc.frame_offset = offset;
+	lcdc.xres = width;
+	lcdc.yres = height;
+	lcdc.screen_width = screen_width;
+	lcdc.color_mode = color_mode;
+
+	switch (color_mode) {
+	case OMAPFB_COLOR_CLUT_8BPP:
+		lcdc.bpp = 8;
+		lcdc.palette_code = 0x3000;
+		lcdc.palette_size = 512;
+		break;
+	case OMAPFB_COLOR_RGB565:
+		lcdc.bpp = 16;
+		lcdc.palette_code = 0x4000;
+		lcdc.palette_size = 32;
+		break;
+	case OMAPFB_COLOR_RGB444:
+		lcdc.bpp = 16;
+		lcdc.palette_code = 0x4000;
+		lcdc.palette_size = 32;
+		break;
+	case OMAPFB_COLOR_YUV420:
+		if (lcdc.ext_mode) {
+			lcdc.bpp = 12;
+			break;
+		}
+		fallthrough;
+	case OMAPFB_COLOR_YUV422:
+		if (lcdc.ext_mode) {
+			lcdc.bpp = 16;
+			break;
+		}
+		fallthrough;
+	default:
+		/* FIXME: other BPPs.
+		 * bpp1: code  0,     size 256
+		 * bpp2: code  0x1000 size 256
+		 * bpp4: code  0x2000 size 256
+		 * bpp12: code 0x4000 size 32
+		 */
+		dev_dbg(lcdc.fbdev->dev, "invalid color mode %d\n", color_mode);
+		BUG();
+		return -1;
+	}
+
+	if (lcdc.ext_mode) {
+		setup_lcd_dma();
+		return 0;
+	}
+
+	if (lcdc.update_mode == OMAPFB_AUTO_UPDATE) {
+		disable_controller();
+		omap_stop_lcd_dma();
+		setup_lcd_dma();
+		enable_controller();
+	}
+
+	return 0;
+}
+
+static int omap_lcdc_enable_plane(int plane, int enable)
+{
+	dev_dbg(lcdc.fbdev->dev,
+		"plane %d enable %d update_mode %d ext_mode %d\n",
+		plane, enable, lcdc.update_mode, lcdc.ext_mode);
+	if (plane != OMAPFB_PLANE_GFX)
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Configure the LCD DMA for a palette load operation and do the palette
+ * downloading synchronously. We don't use the frame+palette load mode of
+ * the controller, since the palette can always be downloaded separately.
+ */
+static void load_palette(void)
+{
+	u16	*palette;
+
+	palette = (u16 *)lcdc.palette_virt;
+
+	*(u16 *)palette &= 0x0fff;
+	*(u16 *)palette |= lcdc.palette_code;
+
+	omap_set_lcd_dma_b1(lcdc.palette_phys,
+		lcdc.palette_size / 4 + 1, 1, OMAP_DMA_DATA_TYPE_S32);
+
+	omap_set_lcd_dma_single_transfer(1);
+	omap_setup_lcd_dma();
+
+	init_completion(&lcdc.palette_load_complete);
+	enable_irqs(OMAP_LCDC_IRQ_LOADED_PALETTE);
+	set_load_mode(OMAP_LCDC_LOAD_PALETTE);
+	enable_controller();
+	if (!wait_for_completion_timeout(&lcdc.palette_load_complete,
+				msecs_to_jiffies(500)))
+		dev_err(lcdc.fbdev->dev, "timeout waiting for FRAME DONE\n");
+	/* The controller gets disabled in the irq handler */
+	disable_irqs(OMAP_LCDC_IRQ_LOADED_PALETTE);
+	omap_stop_lcd_dma();
+
+	omap_set_lcd_dma_single_transfer(lcdc.ext_mode);
+}
+
+/* Used only in internal controller mode */
+static int omap_lcdc_setcolreg(u_int regno, u16 red, u16 green, u16 blue,
+			       u16 transp, int update_hw_pal)
+{
+	u16 *palette;
+
+	if (lcdc.color_mode != OMAPFB_COLOR_CLUT_8BPP || regno > 255)
+		return -EINVAL;
+
+	palette = (u16 *)lcdc.palette_virt;
+
+	palette[regno] &= ~0x0fff;
+	palette[regno] |= ((red >> 12) << 8) | ((green >> 12) << 4 ) |
+			   (blue >> 12);
+
+	if (update_hw_pal) {
+		disable_controller();
+		omap_stop_lcd_dma();
+		load_palette();
+		setup_lcd_dma();
+		set_load_mode(OMAP_LCDC_LOAD_FRAME);
+		enable_controller();
+	}
+
+	return 0;
+}
+
+static void calc_ck_div(int is_tft, int pck, int *pck_div)
+{
+	unsigned long lck;
+
+	pck = max(1, pck);
+	lck = clk_get_rate(lcdc.lcd_ck);
+	*pck_div = (lck + pck - 1) / pck;
+	if (is_tft)
+		*pck_div = max(2, *pck_div);
+	else
+		*pck_div = max(3, *pck_div);
+	if (*pck_div > 255) {
+		/* FIXME: try to adjust logic clock divider as well */
+		*pck_div = 255;
+		dev_warn(lcdc.fbdev->dev, "pixclock %d kHz too low.\n",
+			 pck / 1000);
+	}
+}
+
+static inline void setup_regs(void)
+{
+	u32 l;
+	struct lcd_panel *panel = lcdc.fbdev->panel;
+	int is_tft = panel->config & OMAP_LCDC_PANEL_TFT;
+	unsigned long lck;
+	int pcd;
+
+	l = omap_readl(OMAP_LCDC_CONTROL);
+	l &= ~OMAP_LCDC_CTRL_LCD_TFT;
+	l |= is_tft ? OMAP_LCDC_CTRL_LCD_TFT : 0;
+#ifdef CONFIG_MACH_OMAP_PALMTE
+/* FIXME:if (machine_is_omap_palmte()) { */
+		/* PalmTE uses alternate TFT setting in 8BPP mode */
+		l |= (is_tft && panel->bpp == 8) ? 0x810000 : 0;
+/*	} */
+#endif
+	omap_writel(l, OMAP_LCDC_CONTROL);
+
+	l = omap_readl(OMAP_LCDC_TIMING2);
+	l &= ~(((1 << 6) - 1) << 20);
+	l |= (panel->config & OMAP_LCDC_SIGNAL_MASK) << 20;
+	omap_writel(l, OMAP_LCDC_TIMING2);
+
+	l = panel->x_res - 1;
+	l |= (panel->hsw - 1) << 10;
+	l |= (panel->hfp - 1) << 16;
+	l |= (panel->hbp - 1) << 24;
+	omap_writel(l, OMAP_LCDC_TIMING0);
+
+	l = panel->y_res - 1;
+	l |= (panel->vsw - 1) << 10;
+	l |= panel->vfp << 16;
+	l |= panel->vbp << 24;
+	omap_writel(l, OMAP_LCDC_TIMING1);
+
+	l = omap_readl(OMAP_LCDC_TIMING2);
+	l &= ~0xff;
+
+	lck = clk_get_rate(lcdc.lcd_ck);
+
+	if (!panel->pcd)
+		calc_ck_div(is_tft, panel->pixel_clock * 1000, &pcd);
+	else {
+		dev_warn(lcdc.fbdev->dev,
+		    "Pixel clock divider value is obsolete.\n"
+		    "Try to set pixel_clock to %lu and pcd to 0 "
+		    "in drivers/video/omap/lcd_%s.c and submit a patch.\n",
+			lck / panel->pcd / 1000, panel->name);
+
+		pcd = panel->pcd;
+	}
+	l |= pcd & 0xff;
+	l |= panel->acb << 8;
+	omap_writel(l, OMAP_LCDC_TIMING2);
+
+	/* update panel info with the exact clock */
+	panel->pixel_clock = lck / pcd / 1000;
+}
+
+/*
+ * Configure the LCD controller, download the color palette and start a looped
+ * DMA transfer of the frame image data. Called only in internal
+ * controller mode.
+ */
+static int omap_lcdc_set_update_mode(enum omapfb_update_mode mode)
+{
+	int r = 0;
+
+	if (mode != lcdc.update_mode) {
+		switch (mode) {
+		case OMAPFB_AUTO_UPDATE:
+			setup_regs();
+			load_palette();
+
+			/* Setup and start LCD DMA */
+			setup_lcd_dma();
+
+			set_load_mode(OMAP_LCDC_LOAD_FRAME);
+			enable_irqs(OMAP_LCDC_IRQ_DONE);
+			/* This will start the actual DMA transfer */
+			enable_controller();
+			lcdc.update_mode = mode;
+			break;
+		case OMAPFB_UPDATE_DISABLED:
+			disable_controller();
+			omap_stop_lcd_dma();
+			lcdc.update_mode = mode;
+			break;
+		default:
+			r = -EINVAL;
+		}
+	}
+
+	return r;
+}
+
+static enum omapfb_update_mode omap_lcdc_get_update_mode(void)
+{
+	return lcdc.update_mode;
+}
+
+/* PM code called only in internal controller mode */
+static void omap_lcdc_suspend(void)
+{
+	omap_lcdc_set_update_mode(OMAPFB_UPDATE_DISABLED);
+}
+
+static void omap_lcdc_resume(void)
+{
+	omap_lcdc_set_update_mode(OMAPFB_AUTO_UPDATE);
+}
+
+static void omap_lcdc_get_caps(int plane, struct omapfb_caps *caps)
+{
+	return;
+}
+
+int omap_lcdc_set_dma_callback(void (*callback)(void *data), void *data)
+{
+	BUG_ON(callback == NULL);
+
+	if (lcdc.dma_callback)
+		return -EBUSY;
+	else {
+		lcdc.dma_callback = callback;
+		lcdc.dma_callback_data = data;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(omap_lcdc_set_dma_callback);
+
+void omap_lcdc_free_dma_callback(void)
+{
+	lcdc.dma_callback = NULL;
+}
+EXPORT_SYMBOL(omap_lcdc_free_dma_callback);
+
+static void lcdc_dma_handler(u16 status, void *data)
+{
+	if (lcdc.dma_callback)
+		lcdc.dma_callback(lcdc.dma_callback_data);
+}
+
+static int alloc_palette_ram(void)
+{
+	lcdc.palette_virt = dma_alloc_wc(lcdc.fbdev->dev, MAX_PALETTE_SIZE,
+					 &lcdc.palette_phys, GFP_KERNEL);
+	if (lcdc.palette_virt == NULL) {
+		dev_err(lcdc.fbdev->dev, "failed to alloc palette memory\n");
+		return -ENOMEM;
+	}
+	memset(lcdc.palette_virt, 0, MAX_PALETTE_SIZE);
+
+	return 0;
+}
+
+static void free_palette_ram(void)
+{
+	dma_free_wc(lcdc.fbdev->dev, MAX_PALETTE_SIZE, lcdc.palette_virt,
+		    lcdc.palette_phys);
+}
+
+static int alloc_fbmem(struct omapfb_mem_region *region)
+{
+	int bpp;
+	int frame_size;
+	struct lcd_panel *panel = lcdc.fbdev->panel;
+
+	bpp = panel->bpp;
+	if (bpp == 12)
+		bpp = 16;
+	frame_size = PAGE_ALIGN(panel->x_res * bpp / 8 * panel->y_res);
+	if (region->size > frame_size)
+		frame_size = region->size;
+	lcdc.vram_size = frame_size;
+	lcdc.vram_virt = dma_alloc_wc(lcdc.fbdev->dev, lcdc.vram_size,
+				      &lcdc.vram_phys, GFP_KERNEL);
+	if (lcdc.vram_virt == NULL) {
+		dev_err(lcdc.fbdev->dev, "unable to allocate FB DMA memory\n");
+		return -ENOMEM;
+	}
+	region->size = frame_size;
+	region->paddr = lcdc.vram_phys;
+	region->vaddr = lcdc.vram_virt;
+	region->alloc = 1;
+
+	memset(lcdc.vram_virt, 0, lcdc.vram_size);
+
+	return 0;
+}
+
+static void free_fbmem(void)
+{
+	dma_free_wc(lcdc.fbdev->dev, lcdc.vram_size, lcdc.vram_virt,
+		    lcdc.vram_phys);
+}
+
+static int setup_fbmem(struct omapfb_mem_desc *req_md)
+{
+	if (!req_md->region_cnt) {
+		dev_err(lcdc.fbdev->dev, "no memory regions defined\n");
+		return -EINVAL;
+	}
+
+	if (req_md->region_cnt > 1) {
+		dev_err(lcdc.fbdev->dev, "only one plane is supported\n");
+		req_md->region_cnt = 1;
+	}
+
+	return alloc_fbmem(&req_md->region[0]);
+}
+
+static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
+			  struct omapfb_mem_desc *req_vram)
+{
+	int r;
+	u32 l;
+	int rate;
+	struct clk *tc_ck;
+
+	lcdc.irq_mask = 0;
+
+	lcdc.fbdev = fbdev;
+	lcdc.ext_mode = ext_mode;
+
+	l = 0;
+	omap_writel(l, OMAP_LCDC_CONTROL);
+
+	/* FIXME:
+	 * According to errata some platforms have a clock rate limitiation
+	 */
+	lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck");
+	if (IS_ERR(lcdc.lcd_ck)) {
+		dev_err(fbdev->dev, "unable to access LCD clock\n");
+		r = PTR_ERR(lcdc.lcd_ck);
+		goto fail0;
+	}
+
+	tc_ck = clk_get(fbdev->dev, "tc_ck");
+	if (IS_ERR(tc_ck)) {
+		dev_err(fbdev->dev, "unable to access TC clock\n");
+		r = PTR_ERR(tc_ck);
+		goto fail1;
+	}
+
+	rate = clk_get_rate(tc_ck);
+	clk_put(tc_ck);
+
+	if (machine_is_ams_delta())
+		rate /= 4;
+	if (machine_is_omap_h3())
+		rate /= 3;
+	r = clk_set_rate(lcdc.lcd_ck, rate);
+	if (r) {
+		dev_err(fbdev->dev, "failed to adjust LCD rate\n");
+		goto fail1;
+	}
+	clk_prepare_enable(lcdc.lcd_ck);
+
+	r = request_irq(fbdev->int_irq, lcdc_irq_handler, 0, MODULE_NAME, fbdev);
+	if (r) {
+		dev_err(fbdev->dev, "unable to get IRQ\n");
+		goto fail2;
+	}
+
+	r = omap_request_lcd_dma(lcdc_dma_handler, NULL);
+	if (r) {
+		dev_err(fbdev->dev, "unable to get LCD DMA\n");
+		goto fail3;
+	}
+
+	omap_set_lcd_dma_single_transfer(ext_mode);
+	omap_set_lcd_dma_ext_controller(ext_mode);
+
+	if (!ext_mode)
+		if ((r = alloc_palette_ram()) < 0)
+			goto fail4;
+
+	if ((r = setup_fbmem(req_vram)) < 0)
+		goto fail5;
+
+	pr_info("omapfb: LCDC initialized\n");
+
+	return 0;
+fail5:
+	if (!ext_mode)
+		free_palette_ram();
+fail4:
+	omap_free_lcd_dma();
+fail3:
+	free_irq(fbdev->int_irq, lcdc.fbdev);
+fail2:
+	clk_disable_unprepare(lcdc.lcd_ck);
+fail1:
+	clk_put(lcdc.lcd_ck);
+fail0:
+	return r;
+}
+
+static void omap_lcdc_cleanup(void)
+{
+	if (!lcdc.ext_mode)
+		free_palette_ram();
+	free_fbmem();
+	omap_free_lcd_dma();
+	free_irq(lcdc.fbdev->int_irq, lcdc.fbdev);
+	clk_disable_unprepare(lcdc.lcd_ck);
+	clk_put(lcdc.lcd_ck);
+}
+
+const struct lcd_ctrl omap1_int_ctrl = {
+	.name			= "internal",
+	.init			= omap_lcdc_init,
+	.cleanup		= omap_lcdc_cleanup,
+	.get_caps		= omap_lcdc_get_caps,
+	.set_update_mode	= omap_lcdc_set_update_mode,
+	.get_update_mode	= omap_lcdc_get_update_mode,
+	.update_window		= NULL,
+	.suspend		= omap_lcdc_suspend,
+	.resume			= omap_lcdc_resume,
+	.setup_plane		= omap_lcdc_setup_plane,
+	.enable_plane		= omap_lcdc_enable_plane,
+	.setcolreg		= omap_lcdc_setcolreg,
+};
diff --git a/drivers/video/fbdev/omap/lcdc.h b/drivers/video/fbdev/omap/lcdc.h
new file mode 100644
index 000000000..cbbfd9b9e
--- /dev/null
+++ b/drivers/video/fbdev/omap/lcdc.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef LCDC_H
+#define LCDC_H
+/*
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ */
+#define OMAP_LCDC_BASE			0xfffec000
+#define OMAP_LCDC_SIZE			256
+#define OMAP_LCDC_IRQ			INT_LCD_CTRL
+
+#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
+#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
+#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
+#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
+#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
+#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
+#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
+#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
+
+#define OMAP_LCDC_STAT_DONE		(1 << 0)
+#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
+#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
+#define OMAP_LCDC_STAT_ABC		(1 << 3)
+#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
+#define OMAP_LCDC_STAT_FUF		(1 << 5)
+#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
+
+#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
+#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
+#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
+
+#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
+#define OMAP_LCDC_IRQ_DONE		(1 << 3)
+#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
+#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
+#define OMAP_LCDC_IRQ_LINE		(1 << 6)
+#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
+
+int omap_lcdc_set_dma_callback(void (*callback)(void *data), void *data);
+void omap_lcdc_free_dma_callback(void);
+
+extern const struct lcd_ctrl omap1_int_ctrl;
+
+#endif
diff --git a/drivers/video/fbdev/omap/omapfb.h b/drivers/video/fbdev/omap/omapfb.h
new file mode 100644
index 000000000..ab1cb6e7f
--- /dev/null
+++ b/drivers/video/fbdev/omap/omapfb.h
@@ -0,0 +1,230 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * File: drivers/video/omap/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+#include <linux/fb.h>
+#include <linux/mutex.h>
+#include <linux/omapfb.h>
+
+#define OMAPFB_EVENT_READY	1
+#define OMAPFB_EVENT_DISABLED	2
+
+#define OMAP_LCDC_INV_VSYNC             0x0001
+#define OMAP_LCDC_INV_HSYNC             0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK		0x003f
+
+#define OMAP_LCDC_PANEL_TFT		0x0100
+
+#define OMAPFB_PLANE_XRES_MIN		8
+#define OMAPFB_PLANE_YRES_MIN		8
+
+struct omapfb_device;
+
+#define OMAPFB_PLANE_NUM		1
+
+struct omapfb_mem_region {
+	u32		paddr;
+	void __iomem	*vaddr;
+	unsigned long	size;
+	u8		type;		/* OMAPFB_PLANE_MEM_* */
+	enum omapfb_color_format format;/* OMAPFB_COLOR_* */
+	unsigned	format_used:1;	/* Must be set when format is set.
+					 * Needed b/c of the badly chosen 0
+					 * base for OMAPFB_COLOR_* values
+					 */
+	unsigned	alloc:1;	/* allocated by the driver */
+	unsigned	map:1;		/* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+	int				region_cnt;
+	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
+};
+
+struct lcd_panel {
+	const char	*name;
+	int		config;		/* TFT/STN, signal inversion */
+	int		bpp;		/* Pixel format in fb mem */
+	int		data_lines;	/* Lines on LCD HW interface */
+
+	int		x_res, y_res;
+	int		pixel_clock;	/* In kHz */
+	int		hsw;		/* Horizontal synchronization
+					   pulse width */
+	int		hfp;		/* Horizontal front porch */
+	int		hbp;		/* Horizontal back porch */
+	int		vsw;		/* Vertical synchronization
+					   pulse width */
+	int		vfp;		/* Vertical front porch */
+	int		vbp;		/* Vertical back porch */
+	int		acb;		/* ac-bias pin frequency */
+	int		pcd;		/* pixel clock divider.
+					   Obsolete use pixel_clock instead */
+
+	int		(*init)		(struct lcd_panel *panel,
+					 struct omapfb_device *fbdev);
+	void		(*cleanup)	(struct lcd_panel *panel);
+	int		(*enable)	(struct lcd_panel *panel);
+	void		(*disable)	(struct lcd_panel *panel);
+	unsigned long	(*get_caps)	(struct lcd_panel *panel);
+	int		(*set_bklight_level)(struct lcd_panel *panel,
+					     unsigned int level);
+	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
+	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
+	int		(*run_test)	(struct lcd_panel *panel, int test_num);
+};
+
+struct extif_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];		/* set by extif->convert_timings */
+
+	int converted;
+};
+
+struct lcd_ctrl_extif {
+	int  (*init)		(struct omapfb_device *fbdev);
+	void (*cleanup)		(void);
+	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
+	unsigned long (*get_max_tx_rate)(void);
+	int  (*convert_timings)	(struct extif_timings *timings);
+	void (*set_timings)	(const struct extif_timings *timings);
+	void (*set_bits_per_cycle)(int bpc);
+	void (*write_command)	(const void *buf, unsigned int len);
+	void (*read_data)	(void *buf, unsigned int len);
+	void (*write_data)	(const void *buf, unsigned int len);
+	void (*transfer_area)	(int width, int height,
+				 void (callback)(void *data), void *data);
+	int  (*setup_tearsync)	(unsigned pin_cnt,
+				 unsigned hs_pulse_time, unsigned vs_pulse_time,
+				 int hs_pol_inv, int vs_pol_inv, int div);
+	int  (*enable_tearsync) (int enable, unsigned line);
+
+	unsigned long		max_transmit_size;
+};
+
+struct omapfb_notifier_block {
+	struct notifier_block	nb;
+	void			*data;
+	int			plane_idx;
+};
+
+typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+					  unsigned long event,
+					  void *fbi);
+
+struct lcd_ctrl {
+	const char	*name;
+	void		*data;
+
+	int		(*init)		  (struct omapfb_device *fbdev,
+					   int ext_mode,
+					   struct omapfb_mem_desc *req_md);
+	void		(*cleanup)	  (void);
+	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
+	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
+	int		(*set_update_mode)(enum omapfb_update_mode mode);
+	enum omapfb_update_mode (*get_update_mode)(void);
+	int		(*setup_plane)	  (int plane, int channel_out,
+					   unsigned long offset,
+					   int screen_width,
+					   int pos_x, int pos_y, int width,
+					   int height, int color_mode);
+	int		(*set_rotate)	  (int angle);
+	int		(*setup_mem)	  (int plane, size_t size,
+					   int mem_type, unsigned long *paddr);
+	int		(*mmap)		  (struct fb_info *info,
+					   struct vm_area_struct *vma);
+	int		(*set_scale)	  (int plane,
+					   int orig_width, int orig_height,
+					   int out_width, int out_height);
+	int		(*enable_plane)	  (int plane, int enable);
+	int		(*update_window)  (struct fb_info *fbi,
+					   struct omapfb_update_window *win,
+					   void (*callback)(void *),
+					   void *callback_data);
+	void		(*sync)		  (void);
+	void		(*suspend)	  (void);
+	void		(*resume)	  (void);
+	int		(*run_test)	  (int test_num);
+	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
+					   u16 blue, u16 transp,
+					   int update_hw_mem);
+	int		(*set_color_key)  (struct omapfb_color_key *ck);
+	int		(*get_color_key)  (struct omapfb_color_key *ck);
+};
+
+enum omapfb_state {
+	OMAPFB_DISABLED		= 0,
+	OMAPFB_SUSPENDED	= 99,
+	OMAPFB_ACTIVE		= 100
+};
+
+struct omapfb_plane_struct {
+	int				idx;
+	struct omapfb_plane_info	info;
+	enum omapfb_color_format	color_mode;
+	struct omapfb_device		*fbdev;
+};
+
+struct omapfb_device {
+	int			state;
+	int                     ext_lcdc;		/* Using external
+							   LCD controller */
+	struct mutex		rqueue_mutex;
+
+	int			palette_size;
+	u32			pseudo_palette[17];
+
+	struct lcd_panel	*panel;			/* LCD panel */
+	const struct lcd_ctrl	*ctrl;			/* LCD controller */
+	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
+	int			ext_irq;
+	int			int_irq;
+	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
+							   interface */
+	struct device		*dev;
+	struct fb_var_screeninfo	new_var;	/* for mode changes */
+
+	struct omapfb_mem_desc		mem_desc;
+	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
+
+	struct platform_device	*dssdev;	/* dummy dev for clocks */
+};
+
+extern struct lcd_ctrl omap1_lcd_ctrl;
+
+extern void omapfb_register_panel(struct lcd_panel *panel);
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+				  unsigned long event);
+extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
+				   omapfb_notifier_callback_t callback,
+				   void *callback_data);
+extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
+#endif /* __OMAPFB_H */
diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
new file mode 100644
index 000000000..5ea7c52ba
--- /dev/null
+++ b/drivers/video/fbdev/omap/omapfb_main.c
@@ -0,0 +1,1939 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * Acknowledgements:
+ *   Alex McMains <aam@ridgerun.com>       - Original driver
+ *   Juha Yrjola <juha.yrjola@nokia.com>   - Original driver and improvements
+ *   Dirk Behme <dirk.behme@de.bosch.com>  - changes for 2.6 kernel API
+ *   Texas Instruments                     - H3 support
+ */
+#include <linux/platform_device.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/sysfs.h>
+
+#include <linux/omap-dma.h>
+
+#include <linux/soc/ti/omap1-soc.h>
+#include "omapfb.h"
+#include "lcdc.h"
+
+#define MODULE_NAME	"omapfb"
+
+static unsigned int	def_accel;
+static unsigned long	def_vram[OMAPFB_PLANE_NUM];
+static unsigned int	def_vram_cnt;
+static unsigned long	def_vxres;
+static unsigned long	def_vyres;
+static unsigned int	def_rotate;
+static unsigned int	def_mirror;
+
+static bool	manual_update = IS_BUILTIN(CONFIG_FB_OMAP_MANUAL_UPDATE);
+
+static struct platform_device	*fbdev_pdev;
+static struct lcd_panel		*fbdev_panel;
+static struct omapfb_device	*omapfb_dev;
+
+struct caps_table_struct {
+	unsigned long flag;
+	const char *name;
+};
+
+static const struct caps_table_struct ctrl_caps[] = {
+	{ OMAPFB_CAPS_MANUAL_UPDATE,  "manual update" },
+	{ OMAPFB_CAPS_TEARSYNC,       "tearing synchronization" },
+	{ OMAPFB_CAPS_PLANE_RELOCATE_MEM, "relocate plane memory" },
+	{ OMAPFB_CAPS_PLANE_SCALE,    "scale plane" },
+	{ OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE, "pixel double window" },
+	{ OMAPFB_CAPS_WINDOW_SCALE,   "scale window" },
+	{ OMAPFB_CAPS_WINDOW_OVERLAY, "overlay window" },
+	{ OMAPFB_CAPS_WINDOW_ROTATE,  "rotate window" },
+	{ OMAPFB_CAPS_SET_BACKLIGHT,  "backlight setting" },
+};
+
+static const struct caps_table_struct color_caps[] = {
+	{ 1 << OMAPFB_COLOR_RGB565,	"RGB565", },
+	{ 1 << OMAPFB_COLOR_YUV422,	"YUV422", },
+	{ 1 << OMAPFB_COLOR_YUV420,	"YUV420", },
+	{ 1 << OMAPFB_COLOR_CLUT_8BPP,	"CLUT8", },
+	{ 1 << OMAPFB_COLOR_CLUT_4BPP,	"CLUT4", },
+	{ 1 << OMAPFB_COLOR_CLUT_2BPP,	"CLUT2", },
+	{ 1 << OMAPFB_COLOR_CLUT_1BPP,	"CLUT1", },
+	{ 1 << OMAPFB_COLOR_RGB444,	"RGB444", },
+	{ 1 << OMAPFB_COLOR_YUY422,	"YUY422", },
+};
+
+static void omapdss_release(struct device *dev)
+{
+}
+
+/* dummy device for clocks */
+static struct platform_device omapdss_device = {
+	.name		= "omapdss_dss",
+	.id		= -1,
+	.dev            = {
+		.release = omapdss_release,
+	},
+};
+
+/*
+ * ---------------------------------------------------------------------------
+ * LCD panel
+ * ---------------------------------------------------------------------------
+ */
+extern struct lcd_ctrl hwa742_ctrl;
+
+static const struct lcd_ctrl *ctrls[] = {
+	&omap1_int_ctrl,
+
+#ifdef CONFIG_FB_OMAP_LCDC_HWA742
+	&hwa742_ctrl,
+#endif
+};
+
+#ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
+extern struct lcd_ctrl_extif omap1_ext_if;
+#endif
+
+static void omapfb_rqueue_lock(struct omapfb_device *fbdev)
+{
+	mutex_lock(&fbdev->rqueue_mutex);
+}
+
+static void omapfb_rqueue_unlock(struct omapfb_device *fbdev)
+{
+	mutex_unlock(&fbdev->rqueue_mutex);
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * LCD controller and LCD DMA
+ * ---------------------------------------------------------------------------
+ */
+/*
+ * Allocate resources needed for LCD controller and LCD DMA operations. Video
+ * memory is allocated from system memory according to the virtual display
+ * size, except if a bigger memory size is specified explicitly as a kernel
+ * parameter.
+ */
+static int ctrl_init(struct omapfb_device *fbdev)
+{
+	int r;
+	int i;
+
+	/* kernel/module vram parameters override boot tags/board config */
+	if (def_vram_cnt) {
+		for (i = 0; i < def_vram_cnt; i++)
+			fbdev->mem_desc.region[i].size =
+				PAGE_ALIGN(def_vram[i]);
+		fbdev->mem_desc.region_cnt = i;
+	}
+
+	if (!fbdev->mem_desc.region_cnt) {
+		struct lcd_panel *panel = fbdev->panel;
+		int def_size;
+		int bpp = panel->bpp;
+
+		/* 12 bpp is packed in 16 bits */
+		if (bpp == 12)
+			bpp = 16;
+		def_size = def_vxres * def_vyres * bpp / 8;
+		fbdev->mem_desc.region_cnt = 1;
+		fbdev->mem_desc.region[0].size = PAGE_ALIGN(def_size);
+	}
+	r = fbdev->ctrl->init(fbdev, 0, &fbdev->mem_desc);
+	if (r < 0) {
+		dev_err(fbdev->dev, "controller initialization failed (%d)\n",
+			r);
+		return r;
+	}
+
+#ifdef DEBUG
+	for (i = 0; i < fbdev->mem_desc.region_cnt; i++) {
+		dev_dbg(fbdev->dev, "region%d phys %08x virt %p size=%lu\n",
+			 i,
+			 fbdev->mem_desc.region[i].paddr,
+			 fbdev->mem_desc.region[i].vaddr,
+			 fbdev->mem_desc.region[i].size);
+	}
+#endif
+	return 0;
+}
+
+static void ctrl_cleanup(struct omapfb_device *fbdev)
+{
+	fbdev->ctrl->cleanup();
+}
+
+/* Must be called with fbdev->rqueue_mutex held. */
+static int ctrl_change_mode(struct fb_info *fbi)
+{
+	int r;
+	unsigned long offset;
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	struct fb_var_screeninfo *var = &fbi->var;
+
+	offset = var->yoffset * fbi->fix.line_length +
+		 var->xoffset * var->bits_per_pixel / 8;
+
+	if (fbdev->ctrl->sync)
+		fbdev->ctrl->sync();
+	r = fbdev->ctrl->setup_plane(plane->idx, plane->info.channel_out,
+				 offset, var->xres_virtual,
+				 plane->info.pos_x, plane->info.pos_y,
+				 var->xres, var->yres, plane->color_mode);
+	if (r < 0)
+		return r;
+
+	if (fbdev->ctrl->set_rotate != NULL) {
+		r = fbdev->ctrl->set_rotate(var->rotate);
+		if (r < 0)
+			return r;
+	}
+
+	if (fbdev->ctrl->set_scale != NULL)
+		r = fbdev->ctrl->set_scale(plane->idx,
+				   var->xres, var->yres,
+				   plane->info.out_width,
+				   plane->info.out_height);
+
+	return r;
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * fbdev framework callbacks and the ioctl interface
+ * ---------------------------------------------------------------------------
+ */
+/* Called each time the omapfb device is opened */
+static int omapfb_open(struct fb_info *info, int user)
+{
+	return 0;
+}
+
+static void omapfb_sync(struct fb_info *info);
+
+/* Called when the omapfb device is closed. We make sure that any pending
+ * gfx DMA operations are ended, before we return. */
+static int omapfb_release(struct fb_info *info, int user)
+{
+	omapfb_sync(info);
+	return 0;
+}
+
+/* Store a single color palette entry into a pseudo palette or the hardware
+ * palette if one is available. For now we support only 16bpp and thus store
+ * the entry only to the pseudo palette.
+ */
+static int _setcolreg(struct fb_info *info, u_int regno, u_int red, u_int green,
+			u_int blue, u_int transp, int update_hw_pal)
+{
+	struct omapfb_plane_struct *plane = info->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	struct fb_var_screeninfo *var = &info->var;
+	int r = 0;
+
+	switch (plane->color_mode) {
+	case OMAPFB_COLOR_YUV422:
+	case OMAPFB_COLOR_YUV420:
+	case OMAPFB_COLOR_YUY422:
+		r = -EINVAL;
+		break;
+	case OMAPFB_COLOR_CLUT_8BPP:
+	case OMAPFB_COLOR_CLUT_4BPP:
+	case OMAPFB_COLOR_CLUT_2BPP:
+	case OMAPFB_COLOR_CLUT_1BPP:
+		if (fbdev->ctrl->setcolreg)
+			r = fbdev->ctrl->setcolreg(regno, red, green, blue,
+							transp, update_hw_pal);
+		fallthrough;
+	case OMAPFB_COLOR_RGB565:
+	case OMAPFB_COLOR_RGB444:
+		if (r != 0)
+			break;
+
+		if (regno < 16) {
+			u16 pal;
+			pal = ((red >> (16 - var->red.length)) <<
+					var->red.offset) |
+			      ((green >> (16 - var->green.length)) <<
+					var->green.offset) |
+			      (blue >> (16 - var->blue.length));
+			((u32 *)(info->pseudo_palette))[regno] = pal;
+		}
+		break;
+	default:
+		BUG();
+	}
+	return r;
+}
+
+static int omapfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+			    u_int transp, struct fb_info *info)
+{
+	return _setcolreg(info, regno, red, green, blue, transp, 1);
+}
+
+static int omapfb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
+{
+	int count, index, r;
+	u16 *red, *green, *blue, *transp;
+	u16 trans = 0xffff;
+
+	red     = cmap->red;
+	green   = cmap->green;
+	blue    = cmap->blue;
+	transp  = cmap->transp;
+	index   = cmap->start;
+
+	for (count = 0; count < cmap->len; count++) {
+		if (transp)
+			trans = *transp++;
+		r = _setcolreg(info, index++, *red++, *green++, *blue++, trans,
+				count == cmap->len - 1);
+		if (r != 0)
+			return r;
+	}
+
+	return 0;
+}
+
+static int omapfb_update_full_screen(struct fb_info *fbi);
+
+static int omapfb_blank(int blank, struct fb_info *fbi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	int do_update = 0;
+	int r = 0;
+
+	omapfb_rqueue_lock(fbdev);
+	switch (blank) {
+	case FB_BLANK_UNBLANK:
+		if (fbdev->state == OMAPFB_SUSPENDED) {
+			if (fbdev->ctrl->resume)
+				fbdev->ctrl->resume();
+			if (fbdev->panel->enable)
+				fbdev->panel->enable(fbdev->panel);
+			fbdev->state = OMAPFB_ACTIVE;
+			if (fbdev->ctrl->get_update_mode() ==
+					OMAPFB_MANUAL_UPDATE)
+				do_update = 1;
+		}
+		break;
+	case FB_BLANK_POWERDOWN:
+		if (fbdev->state == OMAPFB_ACTIVE) {
+			if (fbdev->panel->disable)
+				fbdev->panel->disable(fbdev->panel);
+			if (fbdev->ctrl->suspend)
+				fbdev->ctrl->suspend();
+			fbdev->state = OMAPFB_SUSPENDED;
+		}
+		break;
+	default:
+		r = -EINVAL;
+	}
+	omapfb_rqueue_unlock(fbdev);
+
+	if (r == 0 && do_update)
+		r = omapfb_update_full_screen(fbi);
+
+	return r;
+}
+
+static void omapfb_sync(struct fb_info *fbi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+
+	omapfb_rqueue_lock(fbdev);
+	if (fbdev->ctrl->sync)
+		fbdev->ctrl->sync();
+	omapfb_rqueue_unlock(fbdev);
+}
+
+/*
+ * Set fb_info.fix fields and also updates fbdev.
+ * When calling this fb_info.var must be set up already.
+ */
+static void set_fb_fix(struct fb_info *fbi, int from_init)
+{
+	struct fb_fix_screeninfo *fix = &fbi->fix;
+	struct fb_var_screeninfo *var = &fbi->var;
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_mem_region *rg;
+	int bpp;
+
+	rg = &plane->fbdev->mem_desc.region[plane->idx];
+	fbi->screen_base	= rg->vaddr;
+
+	if (!from_init) {
+		mutex_lock(&fbi->mm_lock);
+		fix->smem_start		= rg->paddr;
+		fix->smem_len		= rg->size;
+		mutex_unlock(&fbi->mm_lock);
+	} else {
+		fix->smem_start		= rg->paddr;
+		fix->smem_len		= rg->size;
+	}
+
+	fix->type = FB_TYPE_PACKED_PIXELS;
+	bpp = var->bits_per_pixel;
+	if (var->nonstd)
+		fix->visual = FB_VISUAL_PSEUDOCOLOR;
+	else switch (var->bits_per_pixel) {
+	case 16:
+	case 12:
+		fix->visual = FB_VISUAL_TRUECOLOR;
+		/* 12bpp is stored in 16 bits */
+		bpp = 16;
+		break;
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+		fix->visual = FB_VISUAL_PSEUDOCOLOR;
+		break;
+	}
+	fix->accel		= FB_ACCEL_OMAP1610;
+	fix->line_length	= var->xres_virtual * bpp / 8;
+}
+
+static int set_color_mode(struct omapfb_plane_struct *plane,
+			  struct fb_var_screeninfo *var)
+{
+	switch (var->nonstd) {
+	case 0:
+		break;
+	case OMAPFB_COLOR_YUV422:
+		var->bits_per_pixel = 16;
+		plane->color_mode = var->nonstd;
+		return 0;
+	case OMAPFB_COLOR_YUV420:
+		var->bits_per_pixel = 12;
+		plane->color_mode = var->nonstd;
+		return 0;
+	case OMAPFB_COLOR_YUY422:
+		var->bits_per_pixel = 16;
+		plane->color_mode = var->nonstd;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+
+	switch (var->bits_per_pixel) {
+	case 1:
+		plane->color_mode = OMAPFB_COLOR_CLUT_1BPP;
+		return 0;
+	case 2:
+		plane->color_mode = OMAPFB_COLOR_CLUT_2BPP;
+		return 0;
+	case 4:
+		plane->color_mode = OMAPFB_COLOR_CLUT_4BPP;
+		return 0;
+	case 8:
+		plane->color_mode = OMAPFB_COLOR_CLUT_8BPP;
+		return 0;
+	case 12:
+		var->bits_per_pixel = 16;
+		fallthrough;
+	case 16:
+		if (plane->fbdev->panel->bpp == 12)
+			plane->color_mode = OMAPFB_COLOR_RGB444;
+		else
+			plane->color_mode = OMAPFB_COLOR_RGB565;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/*
+ * Check the values in var against our capabilities and in case of out of
+ * bound values try to adjust them.
+ */
+static int set_fb_var(struct fb_info *fbi,
+		      struct fb_var_screeninfo *var)
+{
+	int		bpp;
+	unsigned long	max_frame_size;
+	unsigned long	line_size;
+	int		xres_min, xres_max;
+	int		yres_min, yres_max;
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	struct lcd_panel *panel = fbdev->panel;
+
+	if (set_color_mode(plane, var) < 0)
+		return -EINVAL;
+
+	bpp = var->bits_per_pixel;
+	if (plane->color_mode == OMAPFB_COLOR_RGB444)
+		bpp = 16;
+
+	switch (var->rotate) {
+	case 0:
+	case 180:
+		xres_min = OMAPFB_PLANE_XRES_MIN;
+		xres_max = panel->x_res;
+		yres_min = OMAPFB_PLANE_YRES_MIN;
+		yres_max = panel->y_res;
+		if (cpu_is_omap15xx()) {
+			var->xres = panel->x_res;
+			var->yres = panel->y_res;
+		}
+		break;
+	case 90:
+	case 270:
+		xres_min = OMAPFB_PLANE_YRES_MIN;
+		xres_max = panel->y_res;
+		yres_min = OMAPFB_PLANE_XRES_MIN;
+		yres_max = panel->x_res;
+		if (cpu_is_omap15xx()) {
+			var->xres = panel->y_res;
+			var->yres = panel->x_res;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (var->xres < xres_min)
+		var->xres = xres_min;
+	if (var->yres < yres_min)
+		var->yres = yres_min;
+	if (var->xres > xres_max)
+		var->xres = xres_max;
+	if (var->yres > yres_max)
+		var->yres = yres_max;
+
+	if (var->xres_virtual < var->xres)
+		var->xres_virtual = var->xres;
+	if (var->yres_virtual < var->yres)
+		var->yres_virtual = var->yres;
+	max_frame_size = fbdev->mem_desc.region[plane->idx].size;
+	line_size = var->xres_virtual * bpp / 8;
+	if (line_size * var->yres_virtual > max_frame_size) {
+		/* Try to keep yres_virtual first */
+		line_size = max_frame_size / var->yres_virtual;
+		var->xres_virtual = line_size * 8 / bpp;
+		if (var->xres_virtual < var->xres) {
+			/* Still doesn't fit. Shrink yres_virtual too */
+			var->xres_virtual = var->xres;
+			line_size = var->xres * bpp / 8;
+			var->yres_virtual = max_frame_size / line_size;
+		}
+		/* Recheck this, as the virtual size changed. */
+		if (var->xres_virtual < var->xres)
+			var->xres = var->xres_virtual;
+		if (var->yres_virtual < var->yres)
+			var->yres = var->yres_virtual;
+		if (var->xres < xres_min || var->yres < yres_min)
+			return -EINVAL;
+	}
+	if (var->xres + var->xoffset > var->xres_virtual)
+		var->xoffset = var->xres_virtual - var->xres;
+	if (var->yres + var->yoffset > var->yres_virtual)
+		var->yoffset = var->yres_virtual - var->yres;
+
+	if (plane->color_mode == OMAPFB_COLOR_RGB444) {
+		var->red.offset	  = 8; var->red.length	 = 4;
+						var->red.msb_right   = 0;
+		var->green.offset = 4; var->green.length = 4;
+						var->green.msb_right = 0;
+		var->blue.offset  = 0; var->blue.length  = 4;
+						var->blue.msb_right  = 0;
+	} else {
+		var->red.offset	 = 11; var->red.length	 = 5;
+						var->red.msb_right   = 0;
+		var->green.offset = 5;  var->green.length = 6;
+						var->green.msb_right = 0;
+		var->blue.offset = 0;  var->blue.length  = 5;
+						var->blue.msb_right  = 0;
+	}
+
+	var->height		= -1;
+	var->width		= -1;
+	var->grayscale		= 0;
+
+	/* pixclock in ps, the rest in pixclock */
+	var->pixclock		= 10000000 / (panel->pixel_clock / 100);
+	var->left_margin	= panel->hfp;
+	var->right_margin	= panel->hbp;
+	var->upper_margin	= panel->vfp;
+	var->lower_margin	= panel->vbp;
+	var->hsync_len		= panel->hsw;
+	var->vsync_len		= panel->vsw;
+
+	/* TODO: get these from panel->config */
+	var->vmode		= FB_VMODE_NONINTERLACED;
+	var->sync		= 0;
+
+	return 0;
+}
+
+
+/*
+ * Set new x,y offsets in the virtual display for the visible area and switch
+ * to the new mode.
+ */
+static int omapfb_pan_display(struct fb_var_screeninfo *var,
+			       struct fb_info *fbi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	int r = 0;
+
+	omapfb_rqueue_lock(fbdev);
+	if (var->xoffset != fbi->var.xoffset ||
+	    var->yoffset != fbi->var.yoffset) {
+		struct fb_var_screeninfo *new_var = &fbdev->new_var;
+
+		memcpy(new_var, &fbi->var, sizeof(*new_var));
+		new_var->xoffset = var->xoffset;
+		new_var->yoffset = var->yoffset;
+		if (set_fb_var(fbi, new_var))
+			r = -EINVAL;
+		else {
+			memcpy(&fbi->var, new_var, sizeof(*new_var));
+			ctrl_change_mode(fbi);
+		}
+	}
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+/* Set mirror to vertical axis and switch to the new mode. */
+static int omapfb_mirror(struct fb_info *fbi, int mirror)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	int r = 0;
+
+	omapfb_rqueue_lock(fbdev);
+	mirror = mirror ? 1 : 0;
+	if (cpu_is_omap15xx())
+		r = -EINVAL;
+	else if (mirror != plane->info.mirror) {
+		plane->info.mirror = mirror;
+		r = ctrl_change_mode(fbi);
+	}
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+/*
+ * Check values in var, try to adjust them in case of out of bound values if
+ * possible, or return error.
+ */
+static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	int r;
+
+	omapfb_rqueue_lock(fbdev);
+	if (fbdev->ctrl->sync != NULL)
+		fbdev->ctrl->sync();
+	r = set_fb_var(fbi, var);
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+/*
+ * Switch to a new mode. The parameters for it has been check already by
+ * omapfb_check_var.
+ */
+static int omapfb_set_par(struct fb_info *fbi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	int r = 0;
+
+	omapfb_rqueue_lock(fbdev);
+	set_fb_fix(fbi, 0);
+	r = ctrl_change_mode(fbi);
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+static int omapfb_update_window_async(struct fb_info *fbi,
+				struct omapfb_update_window *win,
+				void (*callback)(void *),
+				void *callback_data)
+{
+	int xres, yres;
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	struct fb_var_screeninfo *var = &fbi->var;
+
+	switch (var->rotate) {
+	case 0:
+	case 180:
+		xres = fbdev->panel->x_res;
+		yres = fbdev->panel->y_res;
+		break;
+	case 90:
+	case 270:
+		xres = fbdev->panel->y_res;
+		yres = fbdev->panel->x_res;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (win->x >= xres || win->y >= yres ||
+	    win->out_x > xres || win->out_y > yres)
+		return -EINVAL;
+
+	if (!fbdev->ctrl->update_window ||
+	    fbdev->ctrl->get_update_mode() != OMAPFB_MANUAL_UPDATE)
+		return -ENODEV;
+
+	if (win->x + win->width > xres)
+		win->width = xres - win->x;
+	if (win->y + win->height > yres)
+		win->height = yres - win->y;
+	if (win->out_x + win->out_width > xres)
+		win->out_width = xres - win->out_x;
+	if (win->out_y + win->out_height > yres)
+		win->out_height = yres - win->out_y;
+	if (!win->width || !win->height || !win->out_width || !win->out_height)
+		return 0;
+
+	return fbdev->ctrl->update_window(fbi, win, callback, callback_data);
+}
+
+static int omapfb_update_win(struct fb_info *fbi,
+				struct omapfb_update_window *win)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	int ret;
+
+	omapfb_rqueue_lock(plane->fbdev);
+	ret = omapfb_update_window_async(fbi, win, NULL, NULL);
+	omapfb_rqueue_unlock(plane->fbdev);
+
+	return ret;
+}
+
+static int omapfb_update_full_screen(struct fb_info *fbi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	struct omapfb_update_window win;
+	int r;
+
+	if (!fbdev->ctrl->update_window ||
+	    fbdev->ctrl->get_update_mode() != OMAPFB_MANUAL_UPDATE)
+		return -ENODEV;
+
+	win.x = 0;
+	win.y = 0;
+	win.width = fbi->var.xres;
+	win.height = fbi->var.yres;
+	win.out_x = 0;
+	win.out_y = 0;
+	win.out_width = fbi->var.xres;
+	win.out_height = fbi->var.yres;
+	win.format = 0;
+
+	omapfb_rqueue_lock(fbdev);
+	r = fbdev->ctrl->update_window(fbi, &win, NULL, NULL);
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	struct lcd_panel *panel = fbdev->panel;
+	struct omapfb_plane_info old_info;
+	int r = 0;
+
+	if (pi->pos_x + pi->out_width > panel->x_res ||
+	    pi->pos_y + pi->out_height > panel->y_res)
+		return -EINVAL;
+
+	omapfb_rqueue_lock(fbdev);
+	if (pi->enabled && !fbdev->mem_desc.region[plane->idx].size) {
+		/*
+		 * This plane's memory was freed, can't enable it
+		 * until it's reallocated.
+		 */
+		r = -EINVAL;
+		goto out;
+	}
+	old_info = plane->info;
+	plane->info = *pi;
+	if (pi->enabled) {
+		r = ctrl_change_mode(fbi);
+		if (r < 0) {
+			plane->info = old_info;
+			goto out;
+		}
+	}
+	r = fbdev->ctrl->enable_plane(plane->idx, pi->enabled);
+	if (r < 0) {
+		plane->info = old_info;
+		goto out;
+	}
+out:
+	omapfb_rqueue_unlock(fbdev);
+	return r;
+}
+
+static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+
+	*pi = plane->info;
+	return 0;
+}
+
+static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	struct omapfb_mem_region *rg = &fbdev->mem_desc.region[plane->idx];
+	size_t size;
+	int r = 0;
+
+	if (fbdev->ctrl->setup_mem == NULL)
+		return -ENODEV;
+	if (mi->type != OMAPFB_MEMTYPE_SDRAM)
+		return -EINVAL;
+
+	size = PAGE_ALIGN(mi->size);
+	omapfb_rqueue_lock(fbdev);
+	if (plane->info.enabled) {
+		r = -EBUSY;
+		goto out;
+	}
+	if (rg->size != size || rg->type != mi->type) {
+		struct fb_var_screeninfo *new_var = &fbdev->new_var;
+		unsigned long old_size = rg->size;
+		u8	      old_type = rg->type;
+		unsigned long paddr;
+
+		rg->size = size;
+		rg->type = mi->type;
+		/*
+		 * size == 0 is a special case, for which we
+		 * don't check / adjust the screen parameters.
+		 * This isn't a problem since the plane can't
+		 * be reenabled unless its size is > 0.
+		 */
+		if (old_size != size && size) {
+			if (size) {
+				memcpy(new_var, &fbi->var, sizeof(*new_var));
+				r = set_fb_var(fbi, new_var);
+				if (r < 0)
+					goto out;
+			}
+		}
+
+		if (fbdev->ctrl->sync)
+			fbdev->ctrl->sync();
+		r = fbdev->ctrl->setup_mem(plane->idx, size, mi->type, &paddr);
+		if (r < 0) {
+			/* Revert changes. */
+			rg->size = old_size;
+			rg->type = old_type;
+			goto out;
+		}
+		rg->paddr = paddr;
+
+		if (old_size != size) {
+			if (size) {
+				memcpy(&fbi->var, new_var, sizeof(fbi->var));
+				set_fb_fix(fbi, 0);
+			} else {
+				/*
+				 * Set these explicitly to indicate that the
+				 * plane memory is dealloce'd, the other
+				 * screen parameters in var / fix are invalid.
+				 */
+				mutex_lock(&fbi->mm_lock);
+				fbi->fix.smem_start = 0;
+				fbi->fix.smem_len = 0;
+				mutex_unlock(&fbi->mm_lock);
+			}
+		}
+	}
+out:
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	struct omapfb_mem_region *rg;
+
+	rg = &fbdev->mem_desc.region[plane->idx];
+	memset(mi, 0, sizeof(*mi));
+	mi->size = rg->size;
+	mi->type = rg->type;
+
+	return 0;
+}
+
+static int omapfb_set_color_key(struct omapfb_device *fbdev,
+				struct omapfb_color_key *ck)
+{
+	int r;
+
+	if (!fbdev->ctrl->set_color_key)
+		return -ENODEV;
+
+	omapfb_rqueue_lock(fbdev);
+	r = fbdev->ctrl->set_color_key(ck);
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+static int omapfb_get_color_key(struct omapfb_device *fbdev,
+				struct omapfb_color_key *ck)
+{
+	int r;
+
+	if (!fbdev->ctrl->get_color_key)
+		return -ENODEV;
+
+	omapfb_rqueue_lock(fbdev);
+	r = fbdev->ctrl->get_color_key(ck);
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+static struct blocking_notifier_head omapfb_client_list[OMAPFB_PLANE_NUM];
+static int notifier_inited;
+
+static void omapfb_init_notifier(void)
+{
+	int i;
+
+	for (i = 0; i < OMAPFB_PLANE_NUM; i++)
+		BLOCKING_INIT_NOTIFIER_HEAD(&omapfb_client_list[i]);
+}
+
+int omapfb_register_client(struct omapfb_notifier_block *omapfb_nb,
+				omapfb_notifier_callback_t callback,
+				void *callback_data)
+{
+	int r;
+
+	if ((unsigned)omapfb_nb->plane_idx >= OMAPFB_PLANE_NUM)
+		return -EINVAL;
+
+	if (!notifier_inited) {
+		omapfb_init_notifier();
+		notifier_inited = 1;
+	}
+
+	omapfb_nb->nb.notifier_call = (int (*)(struct notifier_block *,
+					unsigned long, void *))callback;
+	omapfb_nb->data = callback_data;
+	r = blocking_notifier_chain_register(
+				&omapfb_client_list[omapfb_nb->plane_idx],
+				&omapfb_nb->nb);
+	if (r)
+		return r;
+	if (omapfb_dev != NULL &&
+	    omapfb_dev->ctrl && omapfb_dev->ctrl->bind_client) {
+		omapfb_dev->ctrl->bind_client(omapfb_nb);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(omapfb_register_client);
+
+int omapfb_unregister_client(struct omapfb_notifier_block *omapfb_nb)
+{
+	return blocking_notifier_chain_unregister(
+		&omapfb_client_list[omapfb_nb->plane_idx], &omapfb_nb->nb);
+}
+EXPORT_SYMBOL(omapfb_unregister_client);
+
+void omapfb_notify_clients(struct omapfb_device *fbdev, unsigned long event)
+{
+	int i;
+
+	if (!notifier_inited)
+		/* no client registered yet */
+		return;
+
+	for (i = 0; i < OMAPFB_PLANE_NUM; i++)
+		blocking_notifier_call_chain(&omapfb_client_list[i], event,
+				    fbdev->fb_info[i]);
+}
+EXPORT_SYMBOL(omapfb_notify_clients);
+
+static int omapfb_set_update_mode(struct omapfb_device *fbdev,
+				   enum omapfb_update_mode mode)
+{
+	int r;
+
+	omapfb_rqueue_lock(fbdev);
+	r = fbdev->ctrl->set_update_mode(mode);
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+static enum omapfb_update_mode omapfb_get_update_mode(struct omapfb_device *fbdev)
+{
+	int r;
+
+	omapfb_rqueue_lock(fbdev);
+	r = fbdev->ctrl->get_update_mode();
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+static void omapfb_get_caps(struct omapfb_device *fbdev, int plane,
+				     struct omapfb_caps *caps)
+{
+	memset(caps, 0, sizeof(*caps));
+	fbdev->ctrl->get_caps(plane, caps);
+	if (fbdev->panel->get_caps)
+		caps->ctrl |= fbdev->panel->get_caps(fbdev->panel);
+}
+
+/* For lcd testing */
+void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval)
+{
+	omapfb_rqueue_lock(fbdev);
+	*(u16 *)fbdev->mem_desc.region[0].vaddr = pixval;
+	if (fbdev->ctrl->get_update_mode() == OMAPFB_MANUAL_UPDATE) {
+		struct omapfb_update_window win;
+
+		memset(&win, 0, sizeof(win));
+		win.width = 2;
+		win.height = 2;
+		win.out_width = 2;
+		win.out_height = 2;
+		fbdev->ctrl->update_window(fbdev->fb_info[0], &win, NULL, NULL);
+	}
+	omapfb_rqueue_unlock(fbdev);
+}
+EXPORT_SYMBOL(omapfb_write_first_pixel);
+
+/*
+ * Ioctl interface. Part of the kernel mode frame buffer API is duplicated
+ * here to be accessible by user mode code.
+ */
+static int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd,
+			unsigned long arg)
+{
+	struct omapfb_plane_struct *plane = fbi->par;
+	struct omapfb_device	*fbdev = plane->fbdev;
+	const struct fb_ops *ops = fbi->fbops;
+	union {
+		struct omapfb_update_window	update_window;
+		struct omapfb_plane_info	plane_info;
+		struct omapfb_mem_info		mem_info;
+		struct omapfb_color_key		color_key;
+		enum omapfb_update_mode		update_mode;
+		struct omapfb_caps		caps;
+		unsigned int		mirror;
+		int			plane_out;
+		int			enable_plane;
+	} p;
+	int r = 0;
+
+	BUG_ON(!ops);
+	switch (cmd) {
+	case OMAPFB_MIRROR:
+		if (get_user(p.mirror, (int __user *)arg))
+			r = -EFAULT;
+		else
+			omapfb_mirror(fbi, p.mirror);
+		break;
+	case OMAPFB_SYNC_GFX:
+		omapfb_sync(fbi);
+		break;
+	case OMAPFB_VSYNC:
+		break;
+	case OMAPFB_SET_UPDATE_MODE:
+		if (get_user(p.update_mode, (int __user *)arg))
+			r = -EFAULT;
+		else
+			r = omapfb_set_update_mode(fbdev, p.update_mode);
+		break;
+	case OMAPFB_GET_UPDATE_MODE:
+		p.update_mode = omapfb_get_update_mode(fbdev);
+		if (put_user(p.update_mode,
+					(enum omapfb_update_mode __user *)arg))
+			r = -EFAULT;
+		break;
+	case OMAPFB_UPDATE_WINDOW_OLD:
+		if (copy_from_user(&p.update_window, (void __user *)arg,
+				   sizeof(struct omapfb_update_window_old)))
+			r = -EFAULT;
+		else {
+			struct omapfb_update_window *u = &p.update_window;
+			u->out_x = u->x;
+			u->out_y = u->y;
+			u->out_width = u->width;
+			u->out_height = u->height;
+			memset(u->reserved, 0, sizeof(u->reserved));
+			r = omapfb_update_win(fbi, u);
+		}
+		break;
+	case OMAPFB_UPDATE_WINDOW:
+		if (copy_from_user(&p.update_window, (void __user *)arg,
+				   sizeof(p.update_window)))
+			r = -EFAULT;
+		else
+			r = omapfb_update_win(fbi, &p.update_window);
+		break;
+	case OMAPFB_SETUP_PLANE:
+		if (copy_from_user(&p.plane_info, (void __user *)arg,
+				   sizeof(p.plane_info)))
+			r = -EFAULT;
+		else
+			r = omapfb_setup_plane(fbi, &p.plane_info);
+		break;
+	case OMAPFB_QUERY_PLANE:
+		if ((r = omapfb_query_plane(fbi, &p.plane_info)) < 0)
+			break;
+		if (copy_to_user((void __user *)arg, &p.plane_info,
+				   sizeof(p.plane_info)))
+			r = -EFAULT;
+		break;
+	case OMAPFB_SETUP_MEM:
+		if (copy_from_user(&p.mem_info, (void __user *)arg,
+				   sizeof(p.mem_info)))
+			r = -EFAULT;
+		else
+			r = omapfb_setup_mem(fbi, &p.mem_info);
+		break;
+	case OMAPFB_QUERY_MEM:
+		if ((r = omapfb_query_mem(fbi, &p.mem_info)) < 0)
+			break;
+		if (copy_to_user((void __user *)arg, &p.mem_info,
+				   sizeof(p.mem_info)))
+			r = -EFAULT;
+		break;
+	case OMAPFB_SET_COLOR_KEY:
+		if (copy_from_user(&p.color_key, (void __user *)arg,
+				   sizeof(p.color_key)))
+			r = -EFAULT;
+		else
+			r = omapfb_set_color_key(fbdev, &p.color_key);
+		break;
+	case OMAPFB_GET_COLOR_KEY:
+		if ((r = omapfb_get_color_key(fbdev, &p.color_key)) < 0)
+			break;
+		if (copy_to_user((void __user *)arg, &p.color_key,
+				 sizeof(p.color_key)))
+			r = -EFAULT;
+		break;
+	case OMAPFB_GET_CAPS:
+		omapfb_get_caps(fbdev, plane->idx, &p.caps);
+		if (copy_to_user((void __user *)arg, &p.caps, sizeof(p.caps)))
+			r = -EFAULT;
+		break;
+	case OMAPFB_LCD_TEST:
+		{
+			int test_num;
+
+			if (get_user(test_num, (int __user *)arg)) {
+				r = -EFAULT;
+				break;
+			}
+			if (!fbdev->panel->run_test) {
+				r = -EINVAL;
+				break;
+			}
+			r = fbdev->panel->run_test(fbdev->panel, test_num);
+			break;
+		}
+	case OMAPFB_CTRL_TEST:
+		{
+			int test_num;
+
+			if (get_user(test_num, (int __user *)arg)) {
+				r = -EFAULT;
+				break;
+			}
+			if (!fbdev->ctrl->run_test) {
+				r = -EINVAL;
+				break;
+			}
+			r = fbdev->ctrl->run_test(test_num);
+			break;
+		}
+	default:
+		r = -EINVAL;
+	}
+
+	return r;
+}
+
+static int omapfb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+	struct omapfb_plane_struct *plane = info->par;
+	struct omapfb_device *fbdev = plane->fbdev;
+	int r;
+
+	omapfb_rqueue_lock(fbdev);
+	r = fbdev->ctrl->mmap(info, vma);
+	omapfb_rqueue_unlock(fbdev);
+
+	return r;
+}
+
+/*
+ * Callback table for the frame buffer framework. Some of these pointers
+ * will be changed according to the current setting of fb_info->accel_flags.
+ */
+static struct fb_ops omapfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_open        = omapfb_open,
+	.fb_release     = omapfb_release,
+	.fb_setcolreg	= omapfb_setcolreg,
+	.fb_setcmap	= omapfb_setcmap,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	.fb_blank       = omapfb_blank,
+	.fb_ioctl	= omapfb_ioctl,
+	.fb_check_var	= omapfb_check_var,
+	.fb_set_par	= omapfb_set_par,
+	.fb_pan_display = omapfb_pan_display,
+};
+
+/*
+ * ---------------------------------------------------------------------------
+ * Sysfs interface
+ * ---------------------------------------------------------------------------
+ */
+/* omapfbX sysfs entries */
+static ssize_t omapfb_show_caps_num(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
+	int plane;
+	size_t size;
+	struct omapfb_caps caps;
+
+	plane = 0;
+	size = 0;
+	while (size < PAGE_SIZE && plane < OMAPFB_PLANE_NUM) {
+		omapfb_get_caps(fbdev, plane, &caps);
+		size += scnprintf(&buf[size], PAGE_SIZE - size,
+			"plane#%d %#010x %#010x %#010x\n",
+			plane, caps.ctrl, caps.plane_color, caps.wnd_color);
+		plane++;
+	}
+	return size;
+}
+
+static ssize_t omapfb_show_caps_text(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
+	int i;
+	struct omapfb_caps caps;
+	int plane;
+	size_t size;
+
+	plane = 0;
+	size = 0;
+	while (size < PAGE_SIZE && plane < OMAPFB_PLANE_NUM) {
+		omapfb_get_caps(fbdev, plane, &caps);
+		size += scnprintf(&buf[size], PAGE_SIZE - size,
+				 "plane#%d:\n", plane);
+		for (i = 0; i < ARRAY_SIZE(ctrl_caps) &&
+		     size < PAGE_SIZE; i++) {
+			if (ctrl_caps[i].flag & caps.ctrl)
+				size += scnprintf(&buf[size], PAGE_SIZE - size,
+					" %s\n", ctrl_caps[i].name);
+		}
+		size += scnprintf(&buf[size], PAGE_SIZE - size,
+				 " plane colors:\n");
+		for (i = 0; i < ARRAY_SIZE(color_caps) &&
+		     size < PAGE_SIZE; i++) {
+			if (color_caps[i].flag & caps.plane_color)
+				size += scnprintf(&buf[size], PAGE_SIZE - size,
+					"  %s\n", color_caps[i].name);
+		}
+		size += scnprintf(&buf[size], PAGE_SIZE - size,
+				 " window colors:\n");
+		for (i = 0; i < ARRAY_SIZE(color_caps) &&
+		     size < PAGE_SIZE; i++) {
+			if (color_caps[i].flag & caps.wnd_color)
+				size += scnprintf(&buf[size], PAGE_SIZE - size,
+					"  %s\n", color_caps[i].name);
+		}
+
+		plane++;
+	}
+	return size;
+}
+
+static DEVICE_ATTR(caps_num, 0444, omapfb_show_caps_num, NULL);
+static DEVICE_ATTR(caps_text, 0444, omapfb_show_caps_text, NULL);
+
+/* panel sysfs entries */
+static ssize_t omapfb_show_panel_name(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%s\n", fbdev->panel->name);
+}
+
+static ssize_t omapfb_show_bklight_level(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
+	int r;
+
+	if (fbdev->panel->get_bklight_level) {
+		r = sysfs_emit(buf, "%d\n",
+			       fbdev->panel->get_bklight_level(fbdev->panel));
+	} else
+		r = -ENODEV;
+	return r;
+}
+
+static ssize_t omapfb_store_bklight_level(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t size)
+{
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
+	int r;
+
+	if (fbdev->panel->set_bklight_level) {
+		unsigned int level;
+
+		if (sscanf(buf, "%10d", &level) == 1) {
+			r = fbdev->panel->set_bklight_level(fbdev->panel,
+							    level);
+		} else
+			r = -EINVAL;
+	} else
+		r = -ENODEV;
+	return r ? r : size;
+}
+
+static ssize_t omapfb_show_bklight_max(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
+	int r;
+
+	if (fbdev->panel->get_bklight_level) {
+		r = sysfs_emit(buf, "%d\n",
+			       fbdev->panel->get_bklight_max(fbdev->panel));
+	} else
+		r = -ENODEV;
+	return r;
+}
+
+static struct device_attribute dev_attr_panel_name =
+	__ATTR(name, 0444, omapfb_show_panel_name, NULL);
+static DEVICE_ATTR(backlight_level, 0664,
+		   omapfb_show_bklight_level, omapfb_store_bklight_level);
+static DEVICE_ATTR(backlight_max, 0444, omapfb_show_bklight_max, NULL);
+
+static struct attribute *panel_attrs[] = {
+	&dev_attr_panel_name.attr,
+	&dev_attr_backlight_level.attr,
+	&dev_attr_backlight_max.attr,
+	NULL,
+};
+
+static const struct attribute_group panel_attr_grp = {
+	.name  = "panel",
+	.attrs = panel_attrs,
+};
+
+/* ctrl sysfs entries */
+static ssize_t omapfb_show_ctrl_name(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct omapfb_device *fbdev = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%s\n", fbdev->ctrl->name);
+}
+
+static struct device_attribute dev_attr_ctrl_name =
+	__ATTR(name, 0444, omapfb_show_ctrl_name, NULL);
+
+static struct attribute *ctrl_attrs[] = {
+	&dev_attr_ctrl_name.attr,
+	NULL,
+};
+
+static const struct attribute_group ctrl_attr_grp = {
+	.name  = "ctrl",
+	.attrs = ctrl_attrs,
+};
+
+static int omapfb_register_sysfs(struct omapfb_device *fbdev)
+{
+	int r;
+
+	if ((r = device_create_file(fbdev->dev, &dev_attr_caps_num)))
+		goto fail0;
+
+	if ((r = device_create_file(fbdev->dev, &dev_attr_caps_text)))
+		goto fail1;
+
+	if ((r = sysfs_create_group(&fbdev->dev->kobj, &panel_attr_grp)))
+		goto fail2;
+
+	if ((r = sysfs_create_group(&fbdev->dev->kobj, &ctrl_attr_grp)))
+		goto fail3;
+
+	return 0;
+fail3:
+	sysfs_remove_group(&fbdev->dev->kobj, &panel_attr_grp);
+fail2:
+	device_remove_file(fbdev->dev, &dev_attr_caps_text);
+fail1:
+	device_remove_file(fbdev->dev, &dev_attr_caps_num);
+fail0:
+	dev_err(fbdev->dev, "unable to register sysfs interface\n");
+	return r;
+}
+
+static void omapfb_unregister_sysfs(struct omapfb_device *fbdev)
+{
+	sysfs_remove_group(&fbdev->dev->kobj, &ctrl_attr_grp);
+	sysfs_remove_group(&fbdev->dev->kobj, &panel_attr_grp);
+	device_remove_file(fbdev->dev, &dev_attr_caps_num);
+	device_remove_file(fbdev->dev, &dev_attr_caps_text);
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * LDM callbacks
+ * ---------------------------------------------------------------------------
+ */
+/* Initialize system fb_info object and set the default video mode.
+ * The frame buffer memory already allocated by lcddma_init
+ */
+static int fbinfo_init(struct omapfb_device *fbdev, struct fb_info *info)
+{
+	struct fb_var_screeninfo	*var = &info->var;
+	struct fb_fix_screeninfo	*fix = &info->fix;
+	int				r = 0;
+
+	info->fbops = &omapfb_ops;
+	info->flags = FBINFO_FLAG_DEFAULT;
+
+	strncpy(fix->id, MODULE_NAME, sizeof(fix->id));
+
+	info->pseudo_palette = fbdev->pseudo_palette;
+
+	var->accel_flags  = def_accel ? FB_ACCELF_TEXT : 0;
+	var->xres = def_vxres;
+	var->yres = def_vyres;
+	var->xres_virtual = def_vxres;
+	var->yres_virtual = def_vyres;
+	var->rotate	  = def_rotate;
+	var->bits_per_pixel = fbdev->panel->bpp;
+
+	set_fb_var(info, var);
+	set_fb_fix(info, 1);
+
+	r = fb_alloc_cmap(&info->cmap, 16, 0);
+	if (r != 0)
+		dev_err(fbdev->dev, "unable to allocate color map memory\n");
+
+	return r;
+}
+
+/* Release the fb_info object */
+static void fbinfo_cleanup(struct omapfb_device *fbdev, struct fb_info *fbi)
+{
+	fb_dealloc_cmap(&fbi->cmap);
+}
+
+static void planes_cleanup(struct omapfb_device *fbdev)
+{
+	int i;
+
+	for (i = 0; i < fbdev->mem_desc.region_cnt; i++) {
+		if (fbdev->fb_info[i] == NULL)
+			break;
+		fbinfo_cleanup(fbdev, fbdev->fb_info[i]);
+		framebuffer_release(fbdev->fb_info[i]);
+	}
+}
+
+static int planes_init(struct omapfb_device *fbdev)
+{
+	struct fb_info *fbi;
+	int i;
+	int r;
+
+	for (i = 0; i < fbdev->mem_desc.region_cnt; i++) {
+		struct omapfb_plane_struct *plane;
+		fbi = framebuffer_alloc(sizeof(struct omapfb_plane_struct),
+					fbdev->dev);
+		if (fbi == NULL) {
+			planes_cleanup(fbdev);
+			return -ENOMEM;
+		}
+		plane = fbi->par;
+		plane->idx = i;
+		plane->fbdev = fbdev;
+		plane->info.mirror = def_mirror;
+		fbdev->fb_info[i] = fbi;
+
+		if ((r = fbinfo_init(fbdev, fbi)) < 0) {
+			framebuffer_release(fbi);
+			planes_cleanup(fbdev);
+			return r;
+		}
+		plane->info.out_width = fbi->var.xres;
+		plane->info.out_height = fbi->var.yres;
+	}
+	return 0;
+}
+
+/*
+ * Free driver resources. Can be called to rollback an aborted initialization
+ * sequence.
+ */
+static void omapfb_free_resources(struct omapfb_device *fbdev, int state)
+{
+	int i;
+
+	switch (state) {
+	case OMAPFB_ACTIVE:
+		for (i = 0; i < fbdev->mem_desc.region_cnt; i++)
+			unregister_framebuffer(fbdev->fb_info[i]);
+		fallthrough;
+	case 7:
+		omapfb_unregister_sysfs(fbdev);
+		fallthrough;
+	case 6:
+		if (fbdev->panel->disable)
+			fbdev->panel->disable(fbdev->panel);
+		fallthrough;
+	case 5:
+		omapfb_set_update_mode(fbdev, OMAPFB_UPDATE_DISABLED);
+		fallthrough;
+	case 4:
+		planes_cleanup(fbdev);
+		fallthrough;
+	case 3:
+		ctrl_cleanup(fbdev);
+		fallthrough;
+	case 2:
+		if (fbdev->panel->cleanup)
+			fbdev->panel->cleanup(fbdev->panel);
+		fallthrough;
+	case 1:
+		dev_set_drvdata(fbdev->dev, NULL);
+		kfree(fbdev);
+		break;
+	case 0:
+		/* nothing to free */
+		break;
+	default:
+		BUG();
+	}
+}
+
+static int omapfb_find_ctrl(struct omapfb_device *fbdev)
+{
+	struct omapfb_platform_data *conf;
+	char name[17];
+	int i;
+
+	conf = dev_get_platdata(fbdev->dev);
+
+	fbdev->ctrl = NULL;
+
+	strncpy(name, conf->lcd.ctrl_name, sizeof(name) - 1);
+	name[sizeof(name) - 1] = '\0';
+
+	if (strcmp(name, "internal") == 0) {
+		fbdev->ctrl = fbdev->int_ctrl;
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ctrls); i++) {
+		dev_dbg(fbdev->dev, "ctrl %s\n", ctrls[i]->name);
+		if (strcmp(ctrls[i]->name, name) == 0) {
+			fbdev->ctrl = ctrls[i];
+			break;
+		}
+	}
+
+	if (fbdev->ctrl == NULL) {
+		dev_dbg(fbdev->dev, "ctrl %s not supported\n", name);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Called by LDM binding to probe and attach a new device.
+ * Initialization sequence:
+ *   1. allocate system omapfb_device structure
+ *   2. select controller type according to platform configuration
+ *      init LCD panel
+ *   3. init LCD controller and LCD DMA
+ *   4. init system fb_info structure for all planes
+ *   5. setup video mode for first plane and enable it
+ *   6. enable LCD panel
+ *   7. register sysfs attributes
+ *   OMAPFB_ACTIVE: register system fb_info structure for all planes
+ */
+static int omapfb_do_probe(struct platform_device *pdev,
+				struct lcd_panel *panel)
+{
+	struct omapfb_device	*fbdev = NULL;
+	int			init_state;
+	unsigned long		phz, hhz, vhz;
+	unsigned long		vram;
+	int			i;
+	int			r = 0;
+
+	init_state = 0;
+
+	if (pdev->num_resources != 2) {
+		dev_err(&pdev->dev, "probed for an unknown device\n");
+		r = -ENODEV;
+		goto cleanup;
+	}
+
+	if (dev_get_platdata(&pdev->dev) == NULL) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		r = -ENOENT;
+		goto cleanup;
+	}
+
+	fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
+	if (fbdev == NULL) {
+		dev_err(&pdev->dev,
+			"unable to allocate memory for device info\n");
+		r = -ENOMEM;
+		goto cleanup;
+	}
+	fbdev->int_irq = platform_get_irq(pdev, 0);
+	if (fbdev->int_irq < 0) {
+		r = -ENXIO;
+		goto cleanup;
+	}
+
+	fbdev->ext_irq = platform_get_irq(pdev, 1);
+	if (fbdev->ext_irq < 0) {
+		r = -ENXIO;
+		goto cleanup;
+	}
+
+	init_state++;
+
+	fbdev->dev = &pdev->dev;
+	fbdev->panel = panel;
+	fbdev->dssdev = &omapdss_device;
+	platform_set_drvdata(pdev, fbdev);
+
+	mutex_init(&fbdev->rqueue_mutex);
+
+	fbdev->int_ctrl = &omap1_int_ctrl;
+#ifdef CONFIG_FB_OMAP_LCDC_EXTERNAL
+	fbdev->ext_if = &omap1_ext_if;
+#endif
+	if (omapfb_find_ctrl(fbdev) < 0) {
+		dev_err(fbdev->dev,
+			"LCD controller not found, board not supported\n");
+		r = -ENODEV;
+		goto cleanup;
+	}
+
+	if (fbdev->panel->init) {
+		r = fbdev->panel->init(fbdev->panel, fbdev);
+		if (r)
+			goto cleanup;
+	}
+
+	pr_info("omapfb: configured for panel %s\n", fbdev->panel->name);
+
+	def_vxres = def_vxres ? def_vxres : fbdev->panel->x_res;
+	def_vyres = def_vyres ? def_vyres : fbdev->panel->y_res;
+
+	init_state++;
+
+	r = ctrl_init(fbdev);
+	if (r)
+		goto cleanup;
+	if (fbdev->ctrl->mmap != NULL)
+		omapfb_ops.fb_mmap = omapfb_mmap;
+	init_state++;
+
+	r = planes_init(fbdev);
+	if (r)
+		goto cleanup;
+	init_state++;
+
+#ifdef CONFIG_FB_OMAP_DMA_TUNE
+	/* Set DMA priority for EMIFF access to highest */
+	omap_set_dma_priority(0, OMAP_DMA_PORT_EMIFF, 15);
+#endif
+
+	r = ctrl_change_mode(fbdev->fb_info[0]);
+	if (r) {
+		dev_err(fbdev->dev, "mode setting failed\n");
+		goto cleanup;
+	}
+
+	/* GFX plane is enabled by default */
+	r = fbdev->ctrl->enable_plane(OMAPFB_PLANE_GFX, 1);
+	if (r)
+		goto cleanup;
+
+	omapfb_set_update_mode(fbdev, manual_update ?
+				   OMAPFB_MANUAL_UPDATE : OMAPFB_AUTO_UPDATE);
+	init_state++;
+
+	if (fbdev->panel->enable) {
+		r = fbdev->panel->enable(fbdev->panel);
+		if (r)
+			goto cleanup;
+	}
+	init_state++;
+
+	r = omapfb_register_sysfs(fbdev);
+	if (r)
+		goto cleanup;
+	init_state++;
+
+	vram = 0;
+	for (i = 0; i < fbdev->mem_desc.region_cnt; i++) {
+		r = register_framebuffer(fbdev->fb_info[i]);
+		if (r != 0) {
+			dev_err(fbdev->dev,
+				"registering framebuffer %d failed\n", i);
+			goto cleanup;
+		}
+		vram += fbdev->mem_desc.region[i].size;
+	}
+
+	fbdev->state = OMAPFB_ACTIVE;
+
+	panel = fbdev->panel;
+	phz = panel->pixel_clock * 1000;
+	hhz = phz * 10 / (panel->hfp + panel->x_res + panel->hbp + panel->hsw);
+	vhz = hhz / (panel->vfp + panel->y_res + panel->vbp + panel->vsw);
+
+	omapfb_dev = fbdev;
+
+	pr_info("omapfb: Framebuffer initialized. Total vram %lu planes %d\n",
+			vram, fbdev->mem_desc.region_cnt);
+	pr_info("omapfb: Pixclock %lu kHz hfreq %lu.%lu kHz "
+			"vfreq %lu.%lu Hz\n",
+			phz / 1000, hhz / 10000, hhz % 10, vhz / 10, vhz % 10);
+
+	return 0;
+
+cleanup:
+	omapfb_free_resources(fbdev, init_state);
+
+	return r;
+}
+
+static int omapfb_probe(struct platform_device *pdev)
+{
+	int r;
+
+	BUG_ON(fbdev_pdev != NULL);
+
+	r = platform_device_register(&omapdss_device);
+	if (r) {
+		dev_err(&pdev->dev, "can't register omapdss device\n");
+		return r;
+	}
+
+	/* Delay actual initialization until the LCD is registered */
+	fbdev_pdev = pdev;
+	if (fbdev_panel != NULL)
+		omapfb_do_probe(fbdev_pdev, fbdev_panel);
+	return 0;
+}
+
+void omapfb_register_panel(struct lcd_panel *panel)
+{
+	BUG_ON(fbdev_panel != NULL);
+
+	fbdev_panel = panel;
+	if (fbdev_pdev != NULL)
+		omapfb_do_probe(fbdev_pdev, fbdev_panel);
+}
+EXPORT_SYMBOL_GPL(omapfb_register_panel);
+
+/* Called when the device is being detached from the driver */
+static int omapfb_remove(struct platform_device *pdev)
+{
+	struct omapfb_device *fbdev = platform_get_drvdata(pdev);
+	enum omapfb_state saved_state = fbdev->state;
+
+	/* FIXME: wait till completion of pending events */
+
+	fbdev->state = OMAPFB_DISABLED;
+	omapfb_free_resources(fbdev, saved_state);
+
+	platform_device_unregister(&omapdss_device);
+	fbdev->dssdev = NULL;
+
+	return 0;
+}
+
+/* PM suspend */
+static int omapfb_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct omapfb_device *fbdev = platform_get_drvdata(pdev);
+
+	if (fbdev != NULL)
+		omapfb_blank(FB_BLANK_POWERDOWN, fbdev->fb_info[0]);
+	return 0;
+}
+
+/* PM resume */
+static int omapfb_resume(struct platform_device *pdev)
+{
+	struct omapfb_device *fbdev = platform_get_drvdata(pdev);
+
+	if (fbdev != NULL)
+		omapfb_blank(FB_BLANK_UNBLANK, fbdev->fb_info[0]);
+	return 0;
+}
+
+static struct platform_driver omapfb_driver = {
+	.probe		= omapfb_probe,
+	.remove		= omapfb_remove,
+	.suspend	= omapfb_suspend,
+	.resume		= omapfb_resume,
+	.driver		= {
+		.name	= MODULE_NAME,
+	},
+};
+
+#ifndef MODULE
+
+/* Process kernel command line parameters */
+static int __init omapfb_setup(char *options)
+{
+	char *this_opt = NULL;
+	int r = 0;
+
+	pr_debug("omapfb: options %s\n", options);
+
+	if (!options || !*options)
+		return 0;
+
+	while (!r && (this_opt = strsep(&options, ",")) != NULL) {
+		if (!strncmp(this_opt, "accel", 5))
+			def_accel = 1;
+		else if (!strncmp(this_opt, "vram:", 5)) {
+			char *suffix;
+			unsigned long vram;
+			vram = (simple_strtoul(this_opt + 5, &suffix, 0));
+			switch (suffix[0]) {
+			case '\0':
+				break;
+			case 'm':
+			case 'M':
+				vram *= 1024;
+				fallthrough;
+			case 'k':
+			case 'K':
+				vram *= 1024;
+				break;
+			default:
+				pr_debug("omapfb: invalid vram suffix %c\n",
+					 suffix[0]);
+				r = -1;
+			}
+			def_vram[def_vram_cnt++] = vram;
+		}
+		else if (!strncmp(this_opt, "vxres:", 6))
+			def_vxres = simple_strtoul(this_opt + 6, NULL, 0);
+		else if (!strncmp(this_opt, "vyres:", 6))
+			def_vyres = simple_strtoul(this_opt + 6, NULL, 0);
+		else if (!strncmp(this_opt, "rotate:", 7))
+			def_rotate = (simple_strtoul(this_opt + 7, NULL, 0));
+		else if (!strncmp(this_opt, "mirror:", 7))
+			def_mirror = (simple_strtoul(this_opt + 7, NULL, 0));
+		else if (!strncmp(this_opt, "manual_update", 13))
+			manual_update = 1;
+		else {
+			pr_debug("omapfb: invalid option\n");
+			r = -1;
+		}
+	}
+
+	return r;
+}
+
+#endif
+
+/* Register both the driver and the device */
+static int __init omapfb_init(void)
+{
+#ifndef MODULE
+	char *option;
+
+	if (fb_get_options("omapfb", &option))
+		return -ENODEV;
+	omapfb_setup(option);
+#endif
+	/* Register the driver with LDM */
+	if (platform_driver_register(&omapfb_driver)) {
+		pr_debug("failed to register omapfb driver\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void __exit omapfb_cleanup(void)
+{
+	platform_driver_unregister(&omapfb_driver);
+}
+
+module_param_named(accel, def_accel, uint, 0664);
+module_param_array_named(vram, def_vram, ulong, &def_vram_cnt, 0664);
+module_param_named(vxres, def_vxres, long, 0664);
+module_param_named(vyres, def_vyres, long, 0664);
+module_param_named(rotate, def_rotate, uint, 0664);
+module_param_named(mirror, def_mirror, uint, 0664);
+module_param_named(manual_update, manual_update, bool, 0664);
+
+module_init(omapfb_init);
+module_exit(omapfb_cleanup);
+
+MODULE_DESCRIPTION("TI OMAP framebuffer driver");
+MODULE_AUTHOR("Imre Deak <imre.deak@nokia.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
new file mode 100644
index 000000000..66aff6cd1
--- /dev/null
+++ b/drivers/video/fbdev/omap/sossi.c
@@ -0,0 +1,683 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OMAP1 Special OptimiSed Screen Interface support
+ *
+ * Copyright (C) 2004-2005 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+
+#include <linux/omap-dma.h>
+#include <linux/soc/ti/omap1-io.h>
+
+#include "omapfb.h"
+#include "lcd_dma.h"
+#include "lcdc.h"
+
+#define MODULE_NAME		"omapfb-sossi"
+
+#define OMAP_SOSSI_BASE         0xfffbac00
+#define SOSSI_ID_REG		0x00
+#define SOSSI_INIT1_REG		0x04
+#define SOSSI_INIT2_REG		0x08
+#define SOSSI_INIT3_REG		0x0c
+#define SOSSI_FIFO_REG		0x10
+#define SOSSI_REOTABLE_REG	0x14
+#define SOSSI_TEARING_REG	0x18
+#define SOSSI_INIT1B_REG	0x1c
+#define SOSSI_FIFOB_REG		0x20
+
+#define DMA_GSCR          0xfffedc04
+#define DMA_LCD_CCR       0xfffee3c2
+#define DMA_LCD_CTRL      0xfffee3c4
+#define DMA_LCD_LCH_CTRL  0xfffee3ea
+
+#define CONF_SOSSI_RESET_R      (1 << 23)
+
+#define RD_ACCESS		0
+#define WR_ACCESS		1
+
+#define SOSSI_MAX_XMIT_BYTES	(512 * 1024)
+
+static struct {
+	void __iomem	*base;
+	struct clk	*fck;
+	unsigned long	fck_hz;
+	spinlock_t	lock;
+	int		bus_pick_count;
+	int		bus_pick_width;
+	int		tearsync_mode;
+	int		tearsync_line;
+	void		(*lcdc_callback)(void *data);
+	void		*lcdc_callback_data;
+	int		vsync_dma_pending;
+	/* timing for read and write access */
+	int		clk_div;
+	u8		clk_tw0[2];
+	u8		clk_tw1[2];
+	/*
+	 * if last_access is the same as current we don't have to change
+	 * the timings
+	 */
+	int		last_access;
+
+	struct omapfb_device	*fbdev;
+} sossi;
+
+static inline u32 sossi_read_reg(int reg)
+{
+	return readl(sossi.base + reg);
+}
+
+static inline u16 sossi_read_reg16(int reg)
+{
+	return readw(sossi.base + reg);
+}
+
+static inline u8 sossi_read_reg8(int reg)
+{
+	return readb(sossi.base + reg);
+}
+
+static inline void sossi_write_reg(int reg, u32 value)
+{
+	writel(value, sossi.base + reg);
+}
+
+static inline void sossi_write_reg16(int reg, u16 value)
+{
+	writew(value, sossi.base + reg);
+}
+
+static inline void sossi_write_reg8(int reg, u8 value)
+{
+	writeb(value, sossi.base + reg);
+}
+
+static void sossi_set_bits(int reg, u32 bits)
+{
+	sossi_write_reg(reg, sossi_read_reg(reg) | bits);
+}
+
+static void sossi_clear_bits(int reg, u32 bits)
+{
+	sossi_write_reg(reg, sossi_read_reg(reg) & ~bits);
+}
+
+#define HZ_TO_PS(x)	(1000000000 / (x / 1000))
+
+static u32 ps_to_sossi_ticks(u32 ps, int div)
+{
+	u32 clk_period = HZ_TO_PS(sossi.fck_hz) * div;
+	return (clk_period + ps - 1) / clk_period;
+}
+
+static int calc_rd_timings(struct extif_timings *t)
+{
+	u32 tw0, tw1;
+	int reon, reoff, recyc, actim;
+	int div = t->clk_div;
+
+	/*
+	 * Make sure that after conversion it still holds that:
+	 * reoff > reon, recyc >= reoff, actim > reon
+	 */
+	reon = ps_to_sossi_ticks(t->re_on_time, div);
+	/* reon will be exactly one sossi tick */
+	if (reon > 1)
+		return -1;
+
+	reoff = ps_to_sossi_ticks(t->re_off_time, div);
+
+	if (reoff <= reon)
+		reoff = reon + 1;
+
+	tw0 = reoff - reon;
+	if (tw0 > 0x10)
+		return -1;
+
+	recyc = ps_to_sossi_ticks(t->re_cycle_time, div);
+	if (recyc <= reoff)
+		recyc = reoff + 1;
+
+	tw1 = recyc - tw0;
+	/* values less then 3 result in the SOSSI block resetting itself */
+	if (tw1 < 3)
+		tw1 = 3;
+	if (tw1 > 0x40)
+		return -1;
+
+	actim = ps_to_sossi_ticks(t->access_time, div);
+	if (actim < reoff)
+		actim++;
+	/*
+	 * access time (data hold time) will be exactly one sossi
+	 * tick
+	 */
+	if (actim - reoff > 1)
+		return -1;
+
+	t->tim[0] = tw0 - 1;
+	t->tim[1] = tw1 - 1;
+
+	return 0;
+}
+
+static int calc_wr_timings(struct extif_timings *t)
+{
+	u32 tw0, tw1;
+	int weon, weoff, wecyc;
+	int div = t->clk_div;
+
+	/*
+	 * Make sure that after conversion it still holds that:
+	 * weoff > weon, wecyc >= weoff
+	 */
+	weon = ps_to_sossi_ticks(t->we_on_time, div);
+	/* weon will be exactly one sossi tick */
+	if (weon > 1)
+		return -1;
+
+	weoff = ps_to_sossi_ticks(t->we_off_time, div);
+	if (weoff <= weon)
+		weoff = weon + 1;
+	tw0 = weoff - weon;
+	if (tw0 > 0x10)
+		return -1;
+
+	wecyc = ps_to_sossi_ticks(t->we_cycle_time, div);
+	if (wecyc <= weoff)
+		wecyc = weoff + 1;
+
+	tw1 = wecyc - tw0;
+	/* values less then 3 result in the SOSSI block resetting itself */
+	if (tw1 < 3)
+		tw1 = 3;
+	if (tw1 > 0x40)
+		return -1;
+
+	t->tim[2] = tw0 - 1;
+	t->tim[3] = tw1 - 1;
+
+	return 0;
+}
+
+static void _set_timing(int div, int tw0, int tw1)
+{
+	u32 l;
+
+#ifdef VERBOSE
+	dev_dbg(sossi.fbdev->dev, "Using TW0 = %d, TW1 = %d, div = %d\n",
+		 tw0 + 1, tw1 + 1, div);
+#endif
+
+	clk_set_rate(sossi.fck, sossi.fck_hz / div);
+	clk_enable(sossi.fck);
+	l = sossi_read_reg(SOSSI_INIT1_REG);
+	l &= ~((0x0f << 20) | (0x3f << 24));
+	l |= (tw0 << 20) | (tw1 << 24);
+	sossi_write_reg(SOSSI_INIT1_REG, l);
+	clk_disable(sossi.fck);
+}
+
+static void _set_bits_per_cycle(int bus_pick_count, int bus_pick_width)
+{
+	u32 l;
+
+	l = sossi_read_reg(SOSSI_INIT3_REG);
+	l &= ~0x3ff;
+	l |= ((bus_pick_count - 1) << 5) | ((bus_pick_width - 1) & 0x1f);
+	sossi_write_reg(SOSSI_INIT3_REG, l);
+}
+
+static void _set_tearsync_mode(int mode, unsigned line)
+{
+	u32 l;
+
+	l = sossi_read_reg(SOSSI_TEARING_REG);
+	l &= ~(((1 << 11) - 1) << 15);
+	l |= line << 15;
+	l &= ~(0x3 << 26);
+	l |= mode << 26;
+	sossi_write_reg(SOSSI_TEARING_REG, l);
+	if (mode)
+		sossi_set_bits(SOSSI_INIT2_REG, 1 << 6);	/* TE logic */
+	else
+		sossi_clear_bits(SOSSI_INIT2_REG, 1 << 6);
+}
+
+static inline void set_timing(int access)
+{
+	if (access != sossi.last_access) {
+		sossi.last_access = access;
+		_set_timing(sossi.clk_div,
+			    sossi.clk_tw0[access], sossi.clk_tw1[access]);
+	}
+}
+
+static void sossi_start_transfer(void)
+{
+	/* WE */
+	sossi_clear_bits(SOSSI_INIT2_REG, 1 << 4);
+	/* CS active low */
+	sossi_clear_bits(SOSSI_INIT1_REG, 1 << 30);
+}
+
+static void sossi_stop_transfer(void)
+{
+	/* WE */
+	sossi_set_bits(SOSSI_INIT2_REG, 1 << 4);
+	/* CS active low */
+	sossi_set_bits(SOSSI_INIT1_REG, 1 << 30);
+}
+
+static void wait_end_of_write(void)
+{
+	/* Before reading we must check if some writings are going on */
+	while (!(sossi_read_reg(SOSSI_INIT2_REG) & (1 << 3)));
+}
+
+static void send_data(const void *data, unsigned int len)
+{
+	while (len >= 4) {
+		sossi_write_reg(SOSSI_FIFO_REG, *(const u32 *) data);
+		len -= 4;
+		data += 4;
+	}
+	while (len >= 2) {
+		sossi_write_reg16(SOSSI_FIFO_REG, *(const u16 *) data);
+		len -= 2;
+		data += 2;
+	}
+	while (len) {
+		sossi_write_reg8(SOSSI_FIFO_REG, *(const u8 *) data);
+		len--;
+		data++;
+	}
+}
+
+static void set_cycles(unsigned int len)
+{
+	unsigned long nr_cycles = len / (sossi.bus_pick_width / 8);
+
+	BUG_ON((nr_cycles - 1) & ~0x3ffff);
+
+	sossi_clear_bits(SOSSI_INIT1_REG, 0x3ffff);
+	sossi_set_bits(SOSSI_INIT1_REG, (nr_cycles - 1) & 0x3ffff);
+}
+
+static int sossi_convert_timings(struct extif_timings *t)
+{
+	int r = 0;
+	int div = t->clk_div;
+
+	t->converted = 0;
+
+	if (div <= 0 || div > 8)
+		return -1;
+
+	/* no CS on SOSSI, so ignore cson, csoff, cs_pulsewidth */
+	if ((r = calc_rd_timings(t)) < 0)
+		return r;
+
+	if ((r = calc_wr_timings(t)) < 0)
+		return r;
+
+	t->tim[4] = div;
+
+	t->converted = 1;
+
+	return 0;
+}
+
+static void sossi_set_timings(const struct extif_timings *t)
+{
+	BUG_ON(!t->converted);
+
+	sossi.clk_tw0[RD_ACCESS] = t->tim[0];
+	sossi.clk_tw1[RD_ACCESS] = t->tim[1];
+
+	sossi.clk_tw0[WR_ACCESS] = t->tim[2];
+	sossi.clk_tw1[WR_ACCESS] = t->tim[3];
+
+	sossi.clk_div = t->tim[4];
+}
+
+static void sossi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
+{
+	*clk_period = HZ_TO_PS(sossi.fck_hz);
+	*max_clk_div = 8;
+}
+
+static void sossi_set_bits_per_cycle(int bpc)
+{
+	int bus_pick_count, bus_pick_width;
+
+	/*
+	 * We set explicitly the bus_pick_count as well, although
+	 * with remapping/reordering disabled it will be calculated by HW
+	 * as (32 / bus_pick_width).
+	 */
+	switch (bpc) {
+	case 8:
+		bus_pick_count = 4;
+		bus_pick_width = 8;
+		break;
+	case 16:
+		bus_pick_count = 2;
+		bus_pick_width = 16;
+		break;
+	default:
+		BUG();
+		return;
+	}
+	sossi.bus_pick_width = bus_pick_width;
+	sossi.bus_pick_count = bus_pick_count;
+}
+
+static int sossi_setup_tearsync(unsigned pin_cnt,
+				unsigned hs_pulse_time, unsigned vs_pulse_time,
+				int hs_pol_inv, int vs_pol_inv, int div)
+{
+	int hs, vs;
+	u32 l;
+
+	if (pin_cnt != 1 || div < 1 || div > 8)
+		return -EINVAL;
+
+	hs = ps_to_sossi_ticks(hs_pulse_time, div);
+	vs = ps_to_sossi_ticks(vs_pulse_time, div);
+	if (vs < 8 || vs <= hs || vs >= (1 << 12))
+		return -EDOM;
+	vs /= 8;
+	vs--;
+	if (hs > 8)
+		hs = 8;
+	if (hs)
+		hs--;
+
+	dev_dbg(sossi.fbdev->dev,
+		"setup_tearsync: hs %d vs %d hs_inv %d vs_inv %d\n",
+		hs, vs, hs_pol_inv, vs_pol_inv);
+
+	clk_enable(sossi.fck);
+	l = sossi_read_reg(SOSSI_TEARING_REG);
+	l &= ~((1 << 15) - 1);
+	l |= vs << 3;
+	l |= hs;
+	if (hs_pol_inv)
+		l |= 1 << 29;
+	else
+		l &= ~(1 << 29);
+	if (vs_pol_inv)
+		l |= 1 << 28;
+	else
+		l &= ~(1 << 28);
+	sossi_write_reg(SOSSI_TEARING_REG, l);
+	clk_disable(sossi.fck);
+
+	return 0;
+}
+
+static int sossi_enable_tearsync(int enable, unsigned line)
+{
+	int mode;
+
+	dev_dbg(sossi.fbdev->dev, "tearsync %d line %d\n", enable, line);
+	if (line >= 1 << 11)
+		return -EINVAL;
+	if (enable) {
+		if (line)
+			mode = 2;		/* HS or VS */
+		else
+			mode = 3;		/* VS only */
+	} else
+		mode = 0;
+	sossi.tearsync_line = line;
+	sossi.tearsync_mode = mode;
+
+	return 0;
+}
+
+static void sossi_write_command(const void *data, unsigned int len)
+{
+	clk_enable(sossi.fck);
+	set_timing(WR_ACCESS);
+	_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
+	/* CMD#/DATA */
+	sossi_clear_bits(SOSSI_INIT1_REG, 1 << 18);
+	set_cycles(len);
+	sossi_start_transfer();
+	send_data(data, len);
+	sossi_stop_transfer();
+	wait_end_of_write();
+	clk_disable(sossi.fck);
+}
+
+static void sossi_write_data(const void *data, unsigned int len)
+{
+	clk_enable(sossi.fck);
+	set_timing(WR_ACCESS);
+	_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
+	/* CMD#/DATA */
+	sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
+	set_cycles(len);
+	sossi_start_transfer();
+	send_data(data, len);
+	sossi_stop_transfer();
+	wait_end_of_write();
+	clk_disable(sossi.fck);
+}
+
+static void sossi_transfer_area(int width, int height,
+				void (callback)(void *data), void *data)
+{
+	BUG_ON(callback == NULL);
+
+	sossi.lcdc_callback = callback;
+	sossi.lcdc_callback_data = data;
+
+	clk_enable(sossi.fck);
+	set_timing(WR_ACCESS);
+	_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
+	_set_tearsync_mode(sossi.tearsync_mode, sossi.tearsync_line);
+	/* CMD#/DATA */
+	sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
+	set_cycles(width * height * sossi.bus_pick_width / 8);
+
+	sossi_start_transfer();
+	if (sossi.tearsync_mode) {
+		/*
+		 * Wait for the sync signal and start the transfer only
+		 * then. We can't seem to be able to use HW sync DMA for
+		 * this since LCD DMA shows huge latencies, as if it
+		 * would ignore some of the DMA requests from SoSSI.
+		 */
+		unsigned long flags;
+
+		spin_lock_irqsave(&sossi.lock, flags);
+		sossi.vsync_dma_pending++;
+		spin_unlock_irqrestore(&sossi.lock, flags);
+	} else
+		/* Just start the transfer right away. */
+		omap_enable_lcd_dma();
+}
+
+static void sossi_dma_callback(void *data)
+{
+	omap_stop_lcd_dma();
+	sossi_stop_transfer();
+	clk_disable(sossi.fck);
+	sossi.lcdc_callback(sossi.lcdc_callback_data);
+}
+
+static void sossi_read_data(void *data, unsigned int len)
+{
+	clk_enable(sossi.fck);
+	set_timing(RD_ACCESS);
+	_set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
+	/* CMD#/DATA */
+	sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
+	set_cycles(len);
+	sossi_start_transfer();
+	while (len >= 4) {
+		*(u32 *) data = sossi_read_reg(SOSSI_FIFO_REG);
+		len -= 4;
+		data += 4;
+	}
+	while (len >= 2) {
+		*(u16 *) data = sossi_read_reg16(SOSSI_FIFO_REG);
+		len -= 2;
+		data += 2;
+	}
+	while (len) {
+		*(u8 *) data = sossi_read_reg8(SOSSI_FIFO_REG);
+		len--;
+		data++;
+	}
+	sossi_stop_transfer();
+	clk_disable(sossi.fck);
+}
+
+static irqreturn_t sossi_match_irq(int irq, void *data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sossi.lock, flags);
+	if (sossi.vsync_dma_pending) {
+		sossi.vsync_dma_pending--;
+		omap_enable_lcd_dma();
+	}
+	spin_unlock_irqrestore(&sossi.lock, flags);
+	return IRQ_HANDLED;
+}
+
+static int sossi_init(struct omapfb_device *fbdev)
+{
+	u32 l, k;
+	struct clk *fck;
+	struct clk *dpll1out_ck;
+	int r;
+
+	sossi.base = ioremap(OMAP_SOSSI_BASE, SZ_1K);
+	if (!sossi.base) {
+		dev_err(fbdev->dev, "can't ioremap SoSSI\n");
+		return -ENOMEM;
+	}
+
+	sossi.fbdev = fbdev;
+	spin_lock_init(&sossi.lock);
+
+	dpll1out_ck = clk_get(fbdev->dev, "ck_dpll1out");
+	if (IS_ERR(dpll1out_ck)) {
+		dev_err(fbdev->dev, "can't get DPLL1OUT clock\n");
+		return PTR_ERR(dpll1out_ck);
+	}
+	/*
+	 * We need the parent clock rate, which we might divide further
+	 * depending on the timing requirements of the controller. See
+	 * _set_timings.
+	 */
+	sossi.fck_hz = clk_get_rate(dpll1out_ck);
+	clk_put(dpll1out_ck);
+
+	fck = clk_get(fbdev->dev, "ck_sossi");
+	if (IS_ERR(fck)) {
+		dev_err(fbdev->dev, "can't get SoSSI functional clock\n");
+		return PTR_ERR(fck);
+	}
+	sossi.fck = fck;
+
+	/* Reset and enable the SoSSI module */
+	l = omap_readl(MOD_CONF_CTRL_1);
+	l |= CONF_SOSSI_RESET_R;
+	omap_writel(l, MOD_CONF_CTRL_1);
+	l &= ~CONF_SOSSI_RESET_R;
+	omap_writel(l, MOD_CONF_CTRL_1);
+
+	clk_prepare_enable(sossi.fck);
+	l = omap_readl(ARM_IDLECT2);
+	l &= ~(1 << 8);			/* DMACK_REQ */
+	omap_writel(l, ARM_IDLECT2);
+
+	l = sossi_read_reg(SOSSI_INIT2_REG);
+	/* Enable and reset the SoSSI block */
+	l |= (1 << 0) | (1 << 1);
+	sossi_write_reg(SOSSI_INIT2_REG, l);
+	/* Take SoSSI out of reset */
+	l &= ~(1 << 1);
+	sossi_write_reg(SOSSI_INIT2_REG, l);
+
+	sossi_write_reg(SOSSI_ID_REG, 0);
+	l = sossi_read_reg(SOSSI_ID_REG);
+	k = sossi_read_reg(SOSSI_ID_REG);
+
+	if (l != 0x55555555 || k != 0xaaaaaaaa) {
+		dev_err(fbdev->dev,
+			"invalid SoSSI sync pattern: %08x, %08x\n", l, k);
+		r = -ENODEV;
+		goto err;
+	}
+
+	if ((r = omap_lcdc_set_dma_callback(sossi_dma_callback, NULL)) < 0) {
+		dev_err(fbdev->dev, "can't get LCDC IRQ\n");
+		r = -ENODEV;
+		goto err;
+	}
+
+	l = sossi_read_reg(SOSSI_ID_REG); /* Component code */
+	l = sossi_read_reg(SOSSI_ID_REG);
+	dev_info(fbdev->dev, "SoSSI version %d.%d initialized\n",
+		l >> 16, l & 0xffff);
+
+	l = sossi_read_reg(SOSSI_INIT1_REG);
+	l |= (1 << 19); /* DMA_MODE */
+	l &= ~(1 << 31); /* REORDERING */
+	sossi_write_reg(SOSSI_INIT1_REG, l);
+
+	if ((r = request_irq(fbdev->ext_irq, sossi_match_irq,
+			     IRQ_TYPE_EDGE_FALLING,
+	     "sossi_match", sossi.fbdev->dev)) < 0) {
+		dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
+		goto err;
+	}
+
+	clk_disable(sossi.fck);
+	return 0;
+
+err:
+	clk_disable_unprepare(sossi.fck);
+	clk_put(sossi.fck);
+	return r;
+}
+
+static void sossi_cleanup(void)
+{
+	omap_lcdc_free_dma_callback();
+	clk_unprepare(sossi.fck);
+	clk_put(sossi.fck);
+	iounmap(sossi.base);
+}
+
+struct lcd_ctrl_extif omap1_ext_if = {
+	.init			= sossi_init,
+	.cleanup		= sossi_cleanup,
+	.get_clk_info		= sossi_get_clk_info,
+	.convert_timings	= sossi_convert_timings,
+	.set_timings		= sossi_set_timings,
+	.set_bits_per_cycle	= sossi_set_bits_per_cycle,
+	.setup_tearsync		= sossi_setup_tearsync,
+	.enable_tearsync	= sossi_enable_tearsync,
+	.write_command		= sossi_write_command,
+	.read_data		= sossi_read_data,
+	.write_data		= sossi_write_data,
+	.transfer_area		= sossi_transfer_area,
+
+	.max_transmit_size	= SOSSI_MAX_XMIT_BYTES,
+};
+