Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 752 insertions, 0 deletions

diff --git a/drivers/video/fbdev/via/via-core.c b/drivers/video/fbdev/via/via-core.c
new file mode 100644
index 000000000..b8cd04def
--- /dev/null
+++ b/drivers/video/fbdev/via/via-core.c
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+ * Copyright 2009 Jonathan Corbet <corbet@lwn.net>
+ */
+
+/*
+ * Core code for the Via multifunction framebuffer device.
+ */
+#include <linux/aperture.h>
+#include <linux/via-core.h>
+#include <linux/via_i2c.h>
+#include <linux/via-gpio.h>
+#include "global.h"
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/pm.h>
+
+/*
+ * The default port config.
+ */
+static struct via_port_cfg adap_configs[] = {
+	[VIA_PORT_26]	= { VIA_PORT_I2C,  VIA_MODE_I2C, VIASR, 0x26 },
+	[VIA_PORT_31]	= { VIA_PORT_I2C,  VIA_MODE_I2C, VIASR, 0x31 },
+	[VIA_PORT_25]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x25 },
+	[VIA_PORT_2C]	= { VIA_PORT_GPIO, VIA_MODE_I2C, VIASR, 0x2c },
+	[VIA_PORT_3D]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x3d },
+	{ 0, 0, 0, 0 }
+};
+
+/*
+ * The OLPC XO-1.5 puts the camera power and reset lines onto
+ * GPIO 2C.
+ */
+static struct via_port_cfg olpc_adap_configs[] = {
+	[VIA_PORT_26]	= { VIA_PORT_I2C,  VIA_MODE_I2C, VIASR, 0x26 },
+	[VIA_PORT_31]	= { VIA_PORT_I2C,  VIA_MODE_I2C, VIASR, 0x31 },
+	[VIA_PORT_25]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x25 },
+	[VIA_PORT_2C]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x2c },
+	[VIA_PORT_3D]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x3d },
+	{ 0, 0, 0, 0 }
+};
+
+/*
+ * We currently only support one viafb device (will there ever be
+ * more than one?), so just declare it globally here.
+ */
+static struct viafb_dev global_dev;
+
+
+/*
+ * Basic register access; spinlock required.
+ */
+static inline void viafb_mmio_write(int reg, u32 v)
+{
+	iowrite32(v, global_dev.engine_mmio + reg);
+}
+
+static inline int viafb_mmio_read(int reg)
+{
+	return ioread32(global_dev.engine_mmio + reg);
+}
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Interrupt management.  We have a single IRQ line for a lot of
+ * different functions, so we need to share it.  The design here
+ * is that we don't want to reimplement the shared IRQ code here;
+ * we also want to avoid having contention for a single handler thread.
+ * So each subdev driver which needs interrupts just requests
+ * them directly from the kernel.  We just have what's needed for
+ * overall access to the interrupt control register.
+ */
+
+/*
+ * Which interrupts are enabled now?
+ */
+static u32 viafb_enabled_ints;
+
+static void viafb_int_init(void)
+{
+	viafb_enabled_ints = 0;
+
+	viafb_mmio_write(VDE_INTERRUPT, 0);
+}
+
+/*
+ * Allow subdevs to ask for specific interrupts to be enabled.  These
+ * functions must be called with reg_lock held
+ */
+void viafb_irq_enable(u32 mask)
+{
+	viafb_enabled_ints |= mask;
+	viafb_mmio_write(VDE_INTERRUPT, viafb_enabled_ints | VDE_I_ENABLE);
+}
+EXPORT_SYMBOL_GPL(viafb_irq_enable);
+
+void viafb_irq_disable(u32 mask)
+{
+	viafb_enabled_ints &= ~mask;
+	if (viafb_enabled_ints == 0)
+		viafb_mmio_write(VDE_INTERRUPT, 0);  /* Disable entirely */
+	else
+		viafb_mmio_write(VDE_INTERRUPT,
+				viafb_enabled_ints | VDE_I_ENABLE);
+}
+EXPORT_SYMBOL_GPL(viafb_irq_disable);
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Currently, the camera driver is the only user of the DMA code, so we
+ * only compile it in if the camera driver is being built.  Chances are,
+ * most viafb systems will not need to have this extra code for a while.
+ * As soon as another user comes long, the ifdef can be removed.
+ */
+#if IS_ENABLED(CONFIG_VIDEO_VIA_CAMERA)
+/*
+ * Access to the DMA engine.  This currently provides what the camera
+ * driver needs (i.e. outgoing only) but is easily expandable if need
+ * be.
+ */
+
+/*
+ * There are four DMA channels in the vx855.  For now, we only
+ * use one of them, though.  Most of the time, the DMA channel
+ * will be idle, so we keep the IRQ handler unregistered except
+ * when some subsystem has indicated an interest.
+ */
+static int viafb_dma_users;
+static DECLARE_COMPLETION(viafb_dma_completion);
+/*
+ * This mutex protects viafb_dma_users and our global interrupt
+ * registration state; it also serializes access to the DMA
+ * engine.
+ */
+static DEFINE_MUTEX(viafb_dma_lock);
+
+/*
+ * The VX855 DMA descriptor (used for s/g transfers) looks
+ * like this.
+ */
+struct viafb_vx855_dma_descr {
+	u32	addr_low;	/* Low part of phys addr */
+	u32	addr_high;	/* High 12 bits of addr */
+	u32	fb_offset;	/* Offset into FB memory */
+	u32	seg_size;	/* Size, 16-byte units */
+	u32	tile_mode;	/* "tile mode" setting */
+	u32	next_desc_low;	/* Next descriptor addr */
+	u32	next_desc_high;
+	u32	pad;		/* Fill out to 64 bytes */
+};
+
+/*
+ * Flags added to the "next descriptor low" pointers
+ */
+#define VIAFB_DMA_MAGIC		0x01  /* ??? Just has to be there */
+#define VIAFB_DMA_FINAL_SEGMENT 0x02  /* Final segment */
+
+/*
+ * The completion IRQ handler.
+ */
+static irqreturn_t viafb_dma_irq(int irq, void *data)
+{
+	int csr;
+	irqreturn_t ret = IRQ_NONE;
+
+	spin_lock(&global_dev.reg_lock);
+	csr = viafb_mmio_read(VDMA_CSR0);
+	if (csr & VDMA_C_DONE) {
+		viafb_mmio_write(VDMA_CSR0, VDMA_C_DONE);
+		complete(&viafb_dma_completion);
+		ret = IRQ_HANDLED;
+	}
+	spin_unlock(&global_dev.reg_lock);
+	return ret;
+}
+
+/*
+ * Indicate a need for DMA functionality.
+ */
+int viafb_request_dma(void)
+{
+	int ret = 0;
+
+	/*
+	 * Only VX855 is supported currently.
+	 */
+	if (global_dev.chip_type != UNICHROME_VX855)
+		return -ENODEV;
+	/*
+	 * Note the new user and set up our interrupt handler
+	 * if need be.
+	 */
+	mutex_lock(&viafb_dma_lock);
+	viafb_dma_users++;
+	if (viafb_dma_users == 1) {
+		ret = request_irq(global_dev.pdev->irq, viafb_dma_irq,
+				IRQF_SHARED, "via-dma", &viafb_dma_users);
+		if (ret)
+			viafb_dma_users--;
+		else
+			viafb_irq_enable(VDE_I_DMA0TDEN);
+	}
+	mutex_unlock(&viafb_dma_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(viafb_request_dma);
+
+void viafb_release_dma(void)
+{
+	mutex_lock(&viafb_dma_lock);
+	viafb_dma_users--;
+	if (viafb_dma_users == 0) {
+		viafb_irq_disable(VDE_I_DMA0TDEN);
+		free_irq(global_dev.pdev->irq, &viafb_dma_users);
+	}
+	mutex_unlock(&viafb_dma_lock);
+}
+EXPORT_SYMBOL_GPL(viafb_release_dma);
+
+/*
+ * Do a scatter/gather DMA copy from FB memory.  You must have done
+ * a successful call to viafb_request_dma() first.
+ */
+int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg)
+{
+	struct viafb_vx855_dma_descr *descr;
+	void *descrpages;
+	dma_addr_t descr_handle;
+	unsigned long flags;
+	int i;
+	struct scatterlist *sgentry;
+	dma_addr_t nextdesc;
+
+	/*
+	 * Get a place to put the descriptors.
+	 */
+	descrpages = dma_alloc_coherent(&global_dev.pdev->dev,
+			nsg*sizeof(struct viafb_vx855_dma_descr),
+			&descr_handle, GFP_KERNEL);
+	if (descrpages == NULL) {
+		dev_err(&global_dev.pdev->dev, "Unable to get descr page.\n");
+		return -ENOMEM;
+	}
+	mutex_lock(&viafb_dma_lock);
+	/*
+	 * Fill them in.
+	 */
+	descr = descrpages;
+	nextdesc = descr_handle + sizeof(struct viafb_vx855_dma_descr);
+	for_each_sg(sg, sgentry, nsg, i) {
+		dma_addr_t paddr = sg_dma_address(sgentry);
+		descr->addr_low = paddr & 0xfffffff0;
+		descr->addr_high = ((u64) paddr >> 32) & 0x0fff;
+		descr->fb_offset = offset;
+		descr->seg_size = sg_dma_len(sgentry) >> 4;
+		descr->tile_mode = 0;
+		descr->next_desc_low = (nextdesc&0xfffffff0) | VIAFB_DMA_MAGIC;
+		descr->next_desc_high = ((u64) nextdesc >> 32) & 0x0fff;
+		descr->pad = 0xffffffff;  /* VIA driver does this */
+		offset += sg_dma_len(sgentry);
+		nextdesc += sizeof(struct viafb_vx855_dma_descr);
+		descr++;
+	}
+	descr[-1].next_desc_low = VIAFB_DMA_FINAL_SEGMENT|VIAFB_DMA_MAGIC;
+	/*
+	 * Program the engine.
+	 */
+	spin_lock_irqsave(&global_dev.reg_lock, flags);
+	init_completion(&viafb_dma_completion);
+	viafb_mmio_write(VDMA_DQWCR0, 0);
+	viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_DONE);
+	viafb_mmio_write(VDMA_MR0, VDMA_MR_TDIE | VDMA_MR_CHAIN);
+	viafb_mmio_write(VDMA_DPRL0, descr_handle | VIAFB_DMA_MAGIC);
+	viafb_mmio_write(VDMA_DPRH0,
+			(((u64)descr_handle >> 32) & 0x0fff) | 0xf0000);
+	(void) viafb_mmio_read(VDMA_CSR0);
+	viafb_mmio_write(VDMA_CSR0, VDMA_C_ENABLE|VDMA_C_START);
+	spin_unlock_irqrestore(&global_dev.reg_lock, flags);
+	/*
+	 * Now we just wait until the interrupt handler says
+	 * we're done.  Except that, actually, we need to wait a little
+	 * longer: the interrupts seem to jump the gun a little and we
+	 * get corrupted frames sometimes.
+	 */
+	wait_for_completion_timeout(&viafb_dma_completion, 1);
+	msleep(1);
+	if ((viafb_mmio_read(VDMA_CSR0)&VDMA_C_DONE) == 0)
+		printk(KERN_ERR "VIA DMA timeout!\n");
+	/*
+	 * Clean up and we're done.
+	 */
+	viafb_mmio_write(VDMA_CSR0, VDMA_C_DONE);
+	viafb_mmio_write(VDMA_MR0, 0); /* Reset int enable */
+	mutex_unlock(&viafb_dma_lock);
+	dma_free_coherent(&global_dev.pdev->dev,
+			nsg*sizeof(struct viafb_vx855_dma_descr), descrpages,
+			descr_handle);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(viafb_dma_copy_out_sg);
+#endif /* CONFIG_VIDEO_VIA_CAMERA */
+
+/* ---------------------------------------------------------------------- */
+/*
+ * Figure out how big our framebuffer memory is.  Kind of ugly,
+ * but evidently we can't trust the information found in the
+ * fbdev configuration area.
+ */
+static u16 via_function3[] = {
+	CLE266_FUNCTION3, KM400_FUNCTION3, CN400_FUNCTION3, CN700_FUNCTION3,
+	CX700_FUNCTION3, KM800_FUNCTION3, KM890_FUNCTION3, P4M890_FUNCTION3,
+	P4M900_FUNCTION3, VX800_FUNCTION3, VX855_FUNCTION3, VX900_FUNCTION3,
+};
+
+/* Get the BIOS-configured framebuffer size from PCI configuration space
+ * of function 3 in the respective chipset */
+static int viafb_get_fb_size_from_pci(int chip_type)
+{
+	int i;
+	u8 offset = 0;
+	u32 FBSize;
+	u32 VideoMemSize;
+
+	/* search for the "FUNCTION3" device in this chipset */
+	for (i = 0; i < ARRAY_SIZE(via_function3); i++) {
+		struct pci_dev *pdev;
+
+		pdev = pci_get_device(PCI_VENDOR_ID_VIA, via_function3[i],
+				      NULL);
+		if (!pdev)
+			continue;
+
+		DEBUG_MSG(KERN_INFO "Device ID = %x\n", pdev->device);
+
+		switch (pdev->device) {
+		case CLE266_FUNCTION3:
+		case KM400_FUNCTION3:
+			offset = 0xE0;
+			break;
+		case CN400_FUNCTION3:
+		case CN700_FUNCTION3:
+		case CX700_FUNCTION3:
+		case KM800_FUNCTION3:
+		case KM890_FUNCTION3:
+		case P4M890_FUNCTION3:
+		case P4M900_FUNCTION3:
+		case VX800_FUNCTION3:
+		case VX855_FUNCTION3:
+		case VX900_FUNCTION3:
+		/*case CN750_FUNCTION3: */
+			offset = 0xA0;
+			break;
+		}
+
+		if (!offset)
+			break;
+
+		pci_read_config_dword(pdev, offset, &FBSize);
+		pci_dev_put(pdev);
+	}
+
+	if (!offset) {
+		printk(KERN_ERR "cannot determine framebuffer size\n");
+		return -EIO;
+	}
+
+	FBSize = FBSize & 0x00007000;
+	DEBUG_MSG(KERN_INFO "FB Size = %x\n", FBSize);
+
+	if (chip_type < UNICHROME_CX700) {
+		switch (FBSize) {
+		case 0x00004000:
+			VideoMemSize = (16 << 20);	/*16M */
+			break;
+
+		case 0x00005000:
+			VideoMemSize = (32 << 20);	/*32M */
+			break;
+
+		case 0x00006000:
+			VideoMemSize = (64 << 20);	/*64M */
+			break;
+
+		default:
+			VideoMemSize = (32 << 20);	/*32M */
+			break;
+		}
+	} else {
+		switch (FBSize) {
+		case 0x00001000:
+			VideoMemSize = (8 << 20);	/*8M */
+			break;
+
+		case 0x00002000:
+			VideoMemSize = (16 << 20);	/*16M */
+			break;
+
+		case 0x00003000:
+			VideoMemSize = (32 << 20);	/*32M */
+			break;
+
+		case 0x00004000:
+			VideoMemSize = (64 << 20);	/*64M */
+			break;
+
+		case 0x00005000:
+			VideoMemSize = (128 << 20);	/*128M */
+			break;
+
+		case 0x00006000:
+			VideoMemSize = (256 << 20);	/*256M */
+			break;
+
+		case 0x00007000:	/* Only on VX855/875 */
+			VideoMemSize = (512 << 20);	/*512M */
+			break;
+
+		default:
+			VideoMemSize = (32 << 20);	/*32M */
+			break;
+		}
+	}
+
+	return VideoMemSize;
+}
+
+
+/*
+ * Figure out and map our MMIO regions.
+ */
+static int via_pci_setup_mmio(struct viafb_dev *vdev)
+{
+	int ret;
+	/*
+	 * Hook up to the device registers.  Note that we soldier
+	 * on if it fails; the framebuffer can operate (without
+	 * acceleration) without this region.
+	 */
+	vdev->engine_start = pci_resource_start(vdev->pdev, 1);
+	vdev->engine_len = pci_resource_len(vdev->pdev, 1);
+	vdev->engine_mmio = ioremap(vdev->engine_start,
+			vdev->engine_len);
+	if (vdev->engine_mmio == NULL)
+		dev_err(&vdev->pdev->dev,
+				"Unable to map engine MMIO; operation will be "
+				"slow and crippled.\n");
+	/*
+	 * Map in framebuffer memory.  For now, failure here is
+	 * fatal.  Unfortunately, in the absence of significant
+	 * vmalloc space, failure here is also entirely plausible.
+	 * Eventually we want to move away from mapping this
+	 * entire region.
+	 */
+	if (vdev->chip_type == UNICHROME_VX900)
+		vdev->fbmem_start = pci_resource_start(vdev->pdev, 2);
+	else
+		vdev->fbmem_start = pci_resource_start(vdev->pdev, 0);
+	ret = vdev->fbmem_len = viafb_get_fb_size_from_pci(vdev->chip_type);
+	if (ret < 0)
+		goto out_unmap;
+
+	/* try to map less memory on failure, 8 MB should be still enough */
+	for (; vdev->fbmem_len >= 8 << 20; vdev->fbmem_len /= 2) {
+		vdev->fbmem = ioremap_wc(vdev->fbmem_start, vdev->fbmem_len);
+		if (vdev->fbmem)
+			break;
+	}
+
+	if (vdev->fbmem == NULL) {
+		ret = -ENOMEM;
+		goto out_unmap;
+	}
+	return 0;
+out_unmap:
+	iounmap(vdev->engine_mmio);
+	return ret;
+}
+
+static void via_pci_teardown_mmio(struct viafb_dev *vdev)
+{
+	iounmap(vdev->fbmem);
+	iounmap(vdev->engine_mmio);
+}
+
+/*
+ * Create our subsidiary devices.
+ */
+static struct viafb_subdev_info {
+	char *name;
+	struct platform_device *platdev;
+} viafb_subdevs[] = {
+	{
+		.name = "viafb-gpio",
+	},
+	{
+		.name = "viafb-i2c",
+	},
+#if IS_ENABLED(CONFIG_VIDEO_VIA_CAMERA)
+	{
+		.name = "viafb-camera",
+	},
+#endif
+};
+#define N_SUBDEVS ARRAY_SIZE(viafb_subdevs)
+
+static int via_create_subdev(struct viafb_dev *vdev,
+			     struct viafb_subdev_info *info)
+{
+	int ret;
+
+	info->platdev = platform_device_alloc(info->name, -1);
+	if (!info->platdev) {
+		dev_err(&vdev->pdev->dev, "Unable to allocate pdev %s\n",
+			info->name);
+		return -ENOMEM;
+	}
+	info->platdev->dev.parent = &vdev->pdev->dev;
+	info->platdev->dev.platform_data = vdev;
+	ret = platform_device_add(info->platdev);
+	if (ret) {
+		dev_err(&vdev->pdev->dev, "Unable to add pdev %s\n",
+				info->name);
+		platform_device_put(info->platdev);
+		info->platdev = NULL;
+	}
+	return ret;
+}
+
+static int via_setup_subdevs(struct viafb_dev *vdev)
+{
+	int i;
+
+	/*
+	 * Ignore return values.  Even if some of the devices
+	 * fail to be created, we'll still be able to use some
+	 * of the rest.
+	 */
+	for (i = 0; i < N_SUBDEVS; i++)
+		via_create_subdev(vdev, viafb_subdevs + i);
+	return 0;
+}
+
+static void via_teardown_subdevs(void)
+{
+	int i;
+
+	for (i = 0; i < N_SUBDEVS; i++)
+		if (viafb_subdevs[i].platdev) {
+			viafb_subdevs[i].platdev->dev.platform_data = NULL;
+			platform_device_unregister(viafb_subdevs[i].platdev);
+		}
+}
+
+/*
+ * Power management functions
+ */
+static __maybe_unused LIST_HEAD(viafb_pm_hooks);
+static __maybe_unused DEFINE_MUTEX(viafb_pm_hooks_lock);
+
+void viafb_pm_register(struct viafb_pm_hooks *hooks)
+{
+	INIT_LIST_HEAD(&hooks->list);
+
+	mutex_lock(&viafb_pm_hooks_lock);
+	list_add_tail(&hooks->list, &viafb_pm_hooks);
+	mutex_unlock(&viafb_pm_hooks_lock);
+}
+EXPORT_SYMBOL_GPL(viafb_pm_register);
+
+void viafb_pm_unregister(struct viafb_pm_hooks *hooks)
+{
+	mutex_lock(&viafb_pm_hooks_lock);
+	list_del(&hooks->list);
+	mutex_unlock(&viafb_pm_hooks_lock);
+}
+EXPORT_SYMBOL_GPL(viafb_pm_unregister);
+
+static int __maybe_unused via_suspend(struct device *dev)
+{
+	struct viafb_pm_hooks *hooks;
+
+	/*
+	 * "I've occasionally hit a few drivers that caused suspend
+	 * failures, and each and every time it was a driver bug, and
+	 * the right thing to do was to just ignore the error and suspend
+	 * anyway - returning an error code and trying to undo the suspend
+	 * is not what anybody ever really wants, even if our model
+	 *_allows_ for it."
+	 * -- Linus Torvalds, Dec. 7, 2009
+	 */
+	mutex_lock(&viafb_pm_hooks_lock);
+	list_for_each_entry_reverse(hooks, &viafb_pm_hooks, list)
+		hooks->suspend(hooks->private);
+	mutex_unlock(&viafb_pm_hooks_lock);
+
+	return 0;
+}
+
+static int __maybe_unused via_resume(struct device *dev)
+{
+	struct viafb_pm_hooks *hooks;
+
+	/* Now bring back any subdevs */
+	mutex_lock(&viafb_pm_hooks_lock);
+	list_for_each_entry(hooks, &viafb_pm_hooks, list)
+		hooks->resume(hooks->private);
+	mutex_unlock(&viafb_pm_hooks_lock);
+
+	return 0;
+}
+
+static int via_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int ret;
+
+	ret = aperture_remove_conflicting_pci_devices(pdev, "viafb");
+	if (ret)
+		return ret;
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	/*
+	 * Global device initialization.
+	 */
+	memset(&global_dev, 0, sizeof(global_dev));
+	global_dev.pdev = pdev;
+	global_dev.chip_type = ent->driver_data;
+	global_dev.port_cfg = adap_configs;
+	if (machine_is_olpc())
+		global_dev.port_cfg = olpc_adap_configs;
+
+	spin_lock_init(&global_dev.reg_lock);
+	ret = via_pci_setup_mmio(&global_dev);
+	if (ret)
+		goto out_disable;
+	/*
+	 * Set up interrupts and create our subdevices.  Continue even if
+	 * some things fail.
+	 */
+	viafb_int_init();
+	via_setup_subdevs(&global_dev);
+	/*
+	 * Set up the framebuffer device
+	 */
+	ret = via_fb_pci_probe(&global_dev);
+	if (ret)
+		goto out_subdevs;
+	return 0;
+
+out_subdevs:
+	via_teardown_subdevs();
+	via_pci_teardown_mmio(&global_dev);
+out_disable:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void via_pci_remove(struct pci_dev *pdev)
+{
+	via_teardown_subdevs();
+	via_fb_pci_remove(pdev);
+	via_pci_teardown_mmio(&global_dev);
+	pci_disable_device(pdev);
+}
+
+
+static const struct pci_device_id via_pci_table[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CLE266_DID),
+	  .driver_data = UNICHROME_CLE266 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K400_DID),
+	  .driver_data = UNICHROME_K400 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K800_DID),
+	  .driver_data = UNICHROME_K800 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_PM800_DID),
+	  .driver_data = UNICHROME_PM800 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN700_DID),
+	  .driver_data = UNICHROME_CN700 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CX700_DID),
+	  .driver_data = UNICHROME_CX700 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_CN750_DID),
+	  .driver_data = UNICHROME_CN750 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_K8M890_DID),
+	  .driver_data = UNICHROME_K8M890 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M890_DID),
+	  .driver_data = UNICHROME_P4M890 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_P4M900_DID),
+	  .driver_data = UNICHROME_P4M900 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX800_DID),
+	  .driver_data = UNICHROME_VX800 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX855_DID),
+	  .driver_data = UNICHROME_VX855 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, UNICHROME_VX900_DID),
+	  .driver_data = UNICHROME_VX900 },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, via_pci_table);
+
+static const struct dev_pm_ops via_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+	.suspend	= via_suspend,
+	.resume		= via_resume,
+	.freeze		= NULL,
+	.thaw		= via_resume,
+	.poweroff	= NULL,
+	.restore	= via_resume,
+#endif
+};
+
+static struct pci_driver via_driver = {
+	.name		= "viafb",
+	.id_table	= via_pci_table,
+	.probe		= via_pci_probe,
+	.remove		= via_pci_remove,
+	.driver.pm	= &via_pm_ops,
+};
+
+static int __init via_core_init(void)
+{
+	int ret;
+
+	ret = viafb_init();
+	if (ret)
+		return ret;
+	viafb_i2c_init();
+	viafb_gpio_init();
+	ret = pci_register_driver(&via_driver);
+	if (ret) {
+		viafb_gpio_exit();
+		viafb_i2c_exit();
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit via_core_exit(void)
+{
+	pci_unregister_driver(&via_driver);
+	viafb_gpio_exit();
+	viafb_i2c_exit();
+	viafb_exit();
+}
+
+module_init(via_core_init);
+module_exit(via_core_exit);