Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 370 insertions, 0 deletions

diff --git a/include/linux/xz.h b/include/linux/xz.h
new file mode 100644
index 000000000..7285ca5d5
--- /dev/null
+++ b/include/linux/xz.h
@@ -0,0 +1,370 @@
+/*
+ * XZ decompressor
+ *
+ * Authors: Lasse Collin <lasse.collin@tukaani.org>
+ *          Igor Pavlov <https://7-zip.org/>
+ *
+ * This file has been put into the public domain.
+ * You can do whatever you want with this file.
+ */
+
+#ifndef XZ_H
+#define XZ_H
+
+#ifdef __KERNEL__
+#	include <linux/stddef.h>
+#	include <linux/types.h>
+#else
+#	include <stddef.h>
+#	include <stdint.h>
+#endif
+
+/* In Linux, this is used to make extern functions static when needed. */
+#ifndef XZ_EXTERN
+#	define XZ_EXTERN extern
+#endif
+
+/**
+ * enum xz_mode - Operation mode
+ *
+ * @XZ_SINGLE:              Single-call mode. This uses less RAM than
+ *                          multi-call modes, because the LZMA2
+ *                          dictionary doesn't need to be allocated as
+ *                          part of the decoder state. All required data
+ *                          structures are allocated at initialization,
+ *                          so xz_dec_run() cannot return XZ_MEM_ERROR.
+ * @XZ_PREALLOC:            Multi-call mode with preallocated LZMA2
+ *                          dictionary buffer. All data structures are
+ *                          allocated at initialization, so xz_dec_run()
+ *                          cannot return XZ_MEM_ERROR.
+ * @XZ_DYNALLOC:            Multi-call mode. The LZMA2 dictionary is
+ *                          allocated once the required size has been
+ *                          parsed from the stream headers. If the
+ *                          allocation fails, xz_dec_run() will return
+ *                          XZ_MEM_ERROR.
+ *
+ * It is possible to enable support only for a subset of the above
+ * modes at compile time by defining XZ_DEC_SINGLE, XZ_DEC_PREALLOC,
+ * or XZ_DEC_DYNALLOC. The xz_dec kernel module is always compiled
+ * with support for all operation modes, but the preboot code may
+ * be built with fewer features to minimize code size.
+ */
+enum xz_mode {
+	XZ_SINGLE,
+	XZ_PREALLOC,
+	XZ_DYNALLOC
+};
+
+/**
+ * enum xz_ret - Return codes
+ * @XZ_OK:                  Everything is OK so far. More input or more
+ *                          output space is required to continue. This
+ *                          return code is possible only in multi-call mode
+ *                          (XZ_PREALLOC or XZ_DYNALLOC).
+ * @XZ_STREAM_END:          Operation finished successfully.
+ * @XZ_UNSUPPORTED_CHECK:   Integrity check type is not supported. Decoding
+ *                          is still possible in multi-call mode by simply
+ *                          calling xz_dec_run() again.
+ *                          Note that this return value is used only if
+ *                          XZ_DEC_ANY_CHECK was defined at build time,
+ *                          which is not used in the kernel. Unsupported
+ *                          check types return XZ_OPTIONS_ERROR if
+ *                          XZ_DEC_ANY_CHECK was not defined at build time.
+ * @XZ_MEM_ERROR:           Allocating memory failed. This return code is
+ *                          possible only if the decoder was initialized
+ *                          with XZ_DYNALLOC. The amount of memory that was
+ *                          tried to be allocated was no more than the
+ *                          dict_max argument given to xz_dec_init().
+ * @XZ_MEMLIMIT_ERROR:      A bigger LZMA2 dictionary would be needed than
+ *                          allowed by the dict_max argument given to
+ *                          xz_dec_init(). This return value is possible
+ *                          only in multi-call mode (XZ_PREALLOC or
+ *                          XZ_DYNALLOC); the single-call mode (XZ_SINGLE)
+ *                          ignores the dict_max argument.
+ * @XZ_FORMAT_ERROR:        File format was not recognized (wrong magic
+ *                          bytes).
+ * @XZ_OPTIONS_ERROR:       This implementation doesn't support the requested
+ *                          compression options. In the decoder this means
+ *                          that the header CRC32 matches, but the header
+ *                          itself specifies something that we don't support.
+ * @XZ_DATA_ERROR:          Compressed data is corrupt.
+ * @XZ_BUF_ERROR:           Cannot make any progress. Details are slightly
+ *                          different between multi-call and single-call
+ *                          mode; more information below.
+ *
+ * In multi-call mode, XZ_BUF_ERROR is returned when two consecutive calls
+ * to XZ code cannot consume any input and cannot produce any new output.
+ * This happens when there is no new input available, or the output buffer
+ * is full while at least one output byte is still pending. Assuming your
+ * code is not buggy, you can get this error only when decoding a compressed
+ * stream that is truncated or otherwise corrupt.
+ *
+ * In single-call mode, XZ_BUF_ERROR is returned only when the output buffer
+ * is too small or the compressed input is corrupt in a way that makes the
+ * decoder produce more output than the caller expected. When it is
+ * (relatively) clear that the compressed input is truncated, XZ_DATA_ERROR
+ * is used instead of XZ_BUF_ERROR.
+ */
+enum xz_ret {
+	XZ_OK,
+	XZ_STREAM_END,
+	XZ_UNSUPPORTED_CHECK,
+	XZ_MEM_ERROR,
+	XZ_MEMLIMIT_ERROR,
+	XZ_FORMAT_ERROR,
+	XZ_OPTIONS_ERROR,
+	XZ_DATA_ERROR,
+	XZ_BUF_ERROR
+};
+
+/**
+ * struct xz_buf - Passing input and output buffers to XZ code
+ * @in:         Beginning of the input buffer. This may be NULL if and only
+ *              if in_pos is equal to in_size.
+ * @in_pos:     Current position in the input buffer. This must not exceed
+ *              in_size.
+ * @in_size:    Size of the input buffer
+ * @out:        Beginning of the output buffer. This may be NULL if and only
+ *              if out_pos is equal to out_size.
+ * @out_pos:    Current position in the output buffer. This must not exceed
+ *              out_size.
+ * @out_size:   Size of the output buffer
+ *
+ * Only the contents of the output buffer from out[out_pos] onward, and
+ * the variables in_pos and out_pos are modified by the XZ code.
+ */
+struct xz_buf {
+	const uint8_t *in;
+	size_t in_pos;
+	size_t in_size;
+
+	uint8_t *out;
+	size_t out_pos;
+	size_t out_size;
+};
+
+/**
+ * struct xz_dec - Opaque type to hold the XZ decoder state
+ */
+struct xz_dec;
+
+/**
+ * xz_dec_init() - Allocate and initialize a XZ decoder state
+ * @mode:       Operation mode
+ * @dict_max:   Maximum size of the LZMA2 dictionary (history buffer) for
+ *              multi-call decoding. This is ignored in single-call mode
+ *              (mode == XZ_SINGLE). LZMA2 dictionary is always 2^n bytes
+ *              or 2^n + 2^(n-1) bytes (the latter sizes are less common
+ *              in practice), so other values for dict_max don't make sense.
+ *              In the kernel, dictionary sizes of 64 KiB, 128 KiB, 256 KiB,
+ *              512 KiB, and 1 MiB are probably the only reasonable values,
+ *              except for kernel and initramfs images where a bigger
+ *              dictionary can be fine and useful.
+ *
+ * Single-call mode (XZ_SINGLE): xz_dec_run() decodes the whole stream at
+ * once. The caller must provide enough output space or the decoding will
+ * fail. The output space is used as the dictionary buffer, which is why
+ * there is no need to allocate the dictionary as part of the decoder's
+ * internal state.
+ *
+ * Because the output buffer is used as the workspace, streams encoded using
+ * a big dictionary are not a problem in single-call mode. It is enough that
+ * the output buffer is big enough to hold the actual uncompressed data; it
+ * can be smaller than the dictionary size stored in the stream headers.
+ *
+ * Multi-call mode with preallocated dictionary (XZ_PREALLOC): dict_max bytes
+ * of memory is preallocated for the LZMA2 dictionary. This way there is no
+ * risk that xz_dec_run() could run out of memory, since xz_dec_run() will
+ * never allocate any memory. Instead, if the preallocated dictionary is too
+ * small for decoding the given input stream, xz_dec_run() will return
+ * XZ_MEMLIMIT_ERROR. Thus, it is important to know what kind of data will be
+ * decoded to avoid allocating excessive amount of memory for the dictionary.
+ *
+ * Multi-call mode with dynamically allocated dictionary (XZ_DYNALLOC):
+ * dict_max specifies the maximum allowed dictionary size that xz_dec_run()
+ * may allocate once it has parsed the dictionary size from the stream
+ * headers. This way excessive allocations can be avoided while still
+ * limiting the maximum memory usage to a sane value to prevent running the
+ * system out of memory when decompressing streams from untrusted sources.
+ *
+ * On success, xz_dec_init() returns a pointer to struct xz_dec, which is
+ * ready to be used with xz_dec_run(). If memory allocation fails,
+ * xz_dec_init() returns NULL.
+ */
+XZ_EXTERN struct xz_dec *xz_dec_init(enum xz_mode mode, uint32_t dict_max);
+
+/**
+ * xz_dec_run() - Run the XZ decoder
+ * @s:          Decoder state allocated using xz_dec_init()
+ * @b:          Input and output buffers
+ *
+ * The possible return values depend on build options and operation mode.
+ * See enum xz_ret for details.
+ *
+ * Note that if an error occurs in single-call mode (return value is not
+ * XZ_STREAM_END), b->in_pos and b->out_pos are not modified and the
+ * contents of the output buffer from b->out[b->out_pos] onward are
+ * undefined. This is true even after XZ_BUF_ERROR, because with some filter
+ * chains, there may be a second pass over the output buffer, and this pass
+ * cannot be properly done if the output buffer is truncated. Thus, you
+ * cannot give the single-call decoder a too small buffer and then expect to
+ * get that amount valid data from the beginning of the stream. You must use
+ * the multi-call decoder if you don't want to uncompress the whole stream.
+ */
+XZ_EXTERN enum xz_ret xz_dec_run(struct xz_dec *s, struct xz_buf *b);
+
+/**
+ * xz_dec_reset() - Reset an already allocated decoder state
+ * @s:          Decoder state allocated using xz_dec_init()
+ *
+ * This function can be used to reset the multi-call decoder state without
+ * freeing and reallocating memory with xz_dec_end() and xz_dec_init().
+ *
+ * In single-call mode, xz_dec_reset() is always called in the beginning of
+ * xz_dec_run(). Thus, explicit call to xz_dec_reset() is useful only in
+ * multi-call mode.
+ */
+XZ_EXTERN void xz_dec_reset(struct xz_dec *s);
+
+/**
+ * xz_dec_end() - Free the memory allocated for the decoder state
+ * @s:          Decoder state allocated using xz_dec_init(). If s is NULL,
+ *              this function does nothing.
+ */
+XZ_EXTERN void xz_dec_end(struct xz_dec *s);
+
+/*
+ * Decompressor for MicroLZMA, an LZMA variant with a very minimal header.
+ * See xz_dec_microlzma_alloc() below for details.
+ *
+ * These functions aren't used or available in preboot code and thus aren't
+ * marked with XZ_EXTERN. This avoids warnings about static functions that
+ * are never defined.
+ */
+/**
+ * struct xz_dec_microlzma - Opaque type to hold the MicroLZMA decoder state
+ */
+struct xz_dec_microlzma;
+
+/**
+ * xz_dec_microlzma_alloc() - Allocate memory for the MicroLZMA decoder
+ * @mode        XZ_SINGLE or XZ_PREALLOC
+ * @dict_size   LZMA dictionary size. This must be at least 4 KiB and
+ *              at most 3 GiB.
+ *
+ * In contrast to xz_dec_init(), this function only allocates the memory
+ * and remembers the dictionary size. xz_dec_microlzma_reset() must be used
+ * before calling xz_dec_microlzma_run().
+ *
+ * The amount of allocated memory is a little less than 30 KiB with XZ_SINGLE.
+ * With XZ_PREALLOC also a dictionary buffer of dict_size bytes is allocated.
+ *
+ * On success, xz_dec_microlzma_alloc() returns a pointer to
+ * struct xz_dec_microlzma. If memory allocation fails or
+ * dict_size is invalid, NULL is returned.
+ *
+ * The compressed format supported by this decoder is a raw LZMA stream
+ * whose first byte (always 0x00) has been replaced with bitwise-negation
+ * of the LZMA properties (lc/lp/pb) byte. For example, if lc/lp/pb is
+ * 3/0/2, the first byte is 0xA2. This way the first byte can never be 0x00.
+ * Just like with LZMA2, lc + lp <= 4 must be true. The LZMA end-of-stream
+ * marker must not be used. The unused values are reserved for future use.
+ * This MicroLZMA header format was created for use in EROFS but may be used
+ * by others too.
+ */
+extern struct xz_dec_microlzma *xz_dec_microlzma_alloc(enum xz_mode mode,
+						       uint32_t dict_size);
+
+/**
+ * xz_dec_microlzma_reset() - Reset the MicroLZMA decoder state
+ * @s           Decoder state allocated using xz_dec_microlzma_alloc()
+ * @comp_size   Compressed size of the input stream
+ * @uncomp_size Uncompressed size of the input stream. A value smaller
+ *              than the real uncompressed size of the input stream can
+ *              be specified if uncomp_size_is_exact is set to false.
+ *              uncomp_size can never be set to a value larger than the
+ *              expected real uncompressed size because it would eventually
+ *              result in XZ_DATA_ERROR.
+ * @uncomp_size_is_exact  This is an int instead of bool to avoid
+ *              requiring stdbool.h. This should normally be set to true.
+ *              When this is set to false, error detection is weaker.
+ */
+extern void xz_dec_microlzma_reset(struct xz_dec_microlzma *s,
+				   uint32_t comp_size, uint32_t uncomp_size,
+				   int uncomp_size_is_exact);
+
+/**
+ * xz_dec_microlzma_run() - Run the MicroLZMA decoder
+ * @s           Decoder state initialized using xz_dec_microlzma_reset()
+ * @b:          Input and output buffers
+ *
+ * This works similarly to xz_dec_run() with a few important differences.
+ * Only the differences are documented here.
+ *
+ * The only possible return values are XZ_OK, XZ_STREAM_END, and
+ * XZ_DATA_ERROR. This function cannot return XZ_BUF_ERROR: if no progress
+ * is possible due to lack of input data or output space, this function will
+ * keep returning XZ_OK. Thus, the calling code must be written so that it
+ * will eventually provide input and output space matching (or exceeding)
+ * comp_size and uncomp_size arguments given to xz_dec_microlzma_reset().
+ * If the caller cannot do this (for example, if the input file is truncated
+ * or otherwise corrupt), the caller must detect this error by itself to
+ * avoid an infinite loop.
+ *
+ * If the compressed data seems to be corrupt, XZ_DATA_ERROR is returned.
+ * This can happen also when incorrect dictionary, uncompressed, or
+ * compressed sizes have been specified.
+ *
+ * With XZ_PREALLOC only: As an extra feature, b->out may be NULL to skip over
+ * uncompressed data. This way the caller doesn't need to provide a temporary
+ * output buffer for the bytes that will be ignored.
+ *
+ * With XZ_SINGLE only: In contrast to xz_dec_run(), the return value XZ_OK
+ * is also possible and thus XZ_SINGLE is actually a limited multi-call mode.
+ * After XZ_OK the bytes decoded so far may be read from the output buffer.
+ * It is possible to continue decoding but the variables b->out and b->out_pos
+ * MUST NOT be changed by the caller. Increasing the value of b->out_size is
+ * allowed to make more output space available; one doesn't need to provide
+ * space for the whole uncompressed data on the first call. The input buffer
+ * may be changed normally like with XZ_PREALLOC. This way input data can be
+ * provided from non-contiguous memory.
+ */
+extern enum xz_ret xz_dec_microlzma_run(struct xz_dec_microlzma *s,
+					struct xz_buf *b);
+
+/**
+ * xz_dec_microlzma_end() - Free the memory allocated for the decoder state
+ * @s:          Decoder state allocated using xz_dec_microlzma_alloc().
+ *              If s is NULL, this function does nothing.
+ */
+extern void xz_dec_microlzma_end(struct xz_dec_microlzma *s);
+
+/*
+ * Standalone build (userspace build or in-kernel build for boot time use)
+ * needs a CRC32 implementation. For normal in-kernel use, kernel's own
+ * CRC32 module is used instead, and users of this module don't need to
+ * care about the functions below.
+ */
+#ifndef XZ_INTERNAL_CRC32
+#	ifdef __KERNEL__
+#		define XZ_INTERNAL_CRC32 0
+#	else
+#		define XZ_INTERNAL_CRC32 1
+#	endif
+#endif
+
+#if XZ_INTERNAL_CRC32
+/*
+ * This must be called before any other xz_* function to initialize
+ * the CRC32 lookup table.
+ */
+XZ_EXTERN void xz_crc32_init(void);
+
+/*
+ * Update CRC32 value using the polynomial from IEEE-802.3. To start a new
+ * calculation, the third argument must be zero. To continue the calculation,
+ * the previously returned value is passed as the third argument.
+ */
+XZ_EXTERN uint32_t xz_crc32(const uint8_t *buf, size_t size, uint32_t crc);
+#endif
+#endif