diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /include/uapi/linux/serial.h | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'include/uapi/linux/serial.h')
-rw-r--r-- | include/uapi/linux/serial.h | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h new file mode 100644 index 000000000..cea06924b --- /dev/null +++ b/include/uapi/linux/serial.h @@ -0,0 +1,168 @@ +/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ +/* + * include/linux/serial.h + * + * Copyright (C) 1992 by Theodore Ts'o. + * + * Redistribution of this file is permitted under the terms of the GNU + * Public License (GPL) + */ + +#ifndef _UAPI_LINUX_SERIAL_H +#define _UAPI_LINUX_SERIAL_H + +#include <linux/types.h> + +#include <linux/tty_flags.h> + + +struct serial_struct { + int type; + int line; + unsigned int port; + int irq; + int flags; + int xmit_fifo_size; + int custom_divisor; + int baud_base; + unsigned short close_delay; + char io_type; + char reserved_char[1]; + int hub6; + unsigned short closing_wait; /* time to wait before closing */ + unsigned short closing_wait2; /* no longer used... */ + unsigned char *iomem_base; + unsigned short iomem_reg_shift; + unsigned int port_high; + unsigned long iomap_base; /* cookie passed into ioremap */ +}; + +/* + * For the close wait times, 0 means wait forever for serial port to + * flush its output. 65535 means don't wait at all. + */ +#define ASYNC_CLOSING_WAIT_INF 0 +#define ASYNC_CLOSING_WAIT_NONE 65535 + +/* + * These are the supported serial types. + */ +#define PORT_UNKNOWN 0 +#define PORT_8250 1 +#define PORT_16450 2 +#define PORT_16550 3 +#define PORT_16550A 4 +#define PORT_CIRRUS 5 +#define PORT_16650 6 +#define PORT_16650V2 7 +#define PORT_16750 8 +#define PORT_STARTECH 9 +#define PORT_16C950 10 /* Oxford Semiconductor */ +#define PORT_16654 11 +#define PORT_16850 12 +#define PORT_RSA 13 /* RSA-DV II/S card */ +#define PORT_MAX 13 + +#define SERIAL_IO_PORT 0 +#define SERIAL_IO_HUB6 1 +#define SERIAL_IO_MEM 2 +#define SERIAL_IO_MEM32 3 +#define SERIAL_IO_AU 4 +#define SERIAL_IO_TSI 5 +#define SERIAL_IO_MEM32BE 6 +#define SERIAL_IO_MEM16 7 + +#define UART_CLEAR_FIFO 0x01 +#define UART_USE_FIFO 0x02 +#define UART_STARTECH 0x04 +#define UART_NATSEMI 0x08 + + +/* + * Multiport serial configuration structure --- external structure + */ +struct serial_multiport_struct { + int irq; + int port1; + unsigned char mask1, match1; + int port2; + unsigned char mask2, match2; + int port3; + unsigned char mask3, match3; + int port4; + unsigned char mask4, match4; + int port_monitor; + int reserved[32]; +}; + +/* + * Serial input interrupt line counters -- external structure + * Four lines can interrupt: CTS, DSR, RI, DCD + */ +struct serial_icounter_struct { + int cts, dsr, rng, dcd; + int rx, tx; + int frame, overrun, parity, brk; + int buf_overrun; + int reserved[9]; +}; + +/* + * Serial interface for controlling RS485 settings on chips with suitable + * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your + * platform. The set function returns the new state, with any unsupported bits + * reverted appropriately. + */ + +struct serial_rs485 { + __u32 flags; /* RS485 feature flags */ +#define SER_RS485_ENABLED (1 << 0) /* If enabled */ +#define SER_RS485_RTS_ON_SEND (1 << 1) /* Logical level for + RTS pin when + sending */ +#define SER_RS485_RTS_AFTER_SEND (1 << 2) /* Logical level for + RTS pin after sent*/ +#define SER_RS485_RX_DURING_TX (1 << 4) +#define SER_RS485_TERMINATE_BUS (1 << 5) /* Enable bus + termination + (if supported) */ + +/* RS-485 addressing mode */ +#define SER_RS485_ADDRB (1 << 6) /* Enable addressing mode */ +#define SER_RS485_ADDR_RECV (1 << 7) /* Receive address filter */ +#define SER_RS485_ADDR_DEST (1 << 8) /* Destination address */ + + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ + __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ + + /* The fields below are defined by flags */ + union { + __u32 padding[5]; /* Memory is cheap, new structs are a pain */ + + struct { + __u8 addr_recv; + __u8 addr_dest; + __u8 padding0[2]; + __u32 padding1[4]; + }; + }; +}; + +/* + * Serial interface for controlling ISO7816 settings on chips with suitable + * support. Set with TIOCSISO7816 and get with TIOCGISO7816 if supported by + * your platform. + */ +struct serial_iso7816 { + __u32 flags; /* ISO7816 feature flags */ +#define SER_ISO7816_ENABLED (1 << 0) +#define SER_ISO7816_T_PARAM (0x0f << 4) +#define SER_ISO7816_T(t) (((t) & 0x0f) << 4) + __u32 tg; + __u32 sc_fi; + __u32 sc_di; + __u32 clk; + __u32 reserved[5]; +}; + +#endif /* _UAPI_LINUX_SERIAL_H */ |