Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 932 insertions, 0 deletions

diff --git a/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh
new file mode 100755
index 000000000..c51c83421
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/ocelot/basic_qos.sh
@@ -0,0 +1,253 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2022 NXP
+
+# The script is mostly generic, with the exception of the
+# ethtool per-TC counter names ("rx_green_prio_${tc}")
+
+WAIT_TIME=1
+NUM_NETIFS=4
+STABLE_MAC_ADDRS=yes
+NETIF_CREATE=no
+lib_dir=$(dirname $0)/../../../net/forwarding
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+
+require_command dcb
+
+h1=${NETIFS[p1]}
+swp1=${NETIFS[p2]}
+swp2=${NETIFS[p3]}
+h2=${NETIFS[p4]}
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+h1_create()
+{
+	simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h1_vlan_create()
+{
+	local vid=$1
+
+	vlan_create $h1 $vid
+	simple_if_init $h1.$vid $H1_IPV4/24 $H1_IPV6/64
+	ip link set $h1.$vid type vlan \
+		egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \
+		ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
+}
+
+h1_vlan_destroy()
+{
+	local vid=$1
+
+	simple_if_fini $h1.$vid $H1_IPV4/24 $H1_IPV6/64
+	vlan_destroy $h1 $vid
+}
+
+h2_vlan_create()
+{
+	local vid=$1
+
+	vlan_create $h2 $vid
+	simple_if_init $h2.$vid $H2_IPV4/24 $H2_IPV6/64
+	ip link set $h2.$vid type vlan \
+		egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 \
+		ingress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
+}
+
+h2_vlan_destroy()
+{
+	local vid=$1
+
+	simple_if_fini $h2.$vid $H2_IPV4/24 $H2_IPV6/64
+	vlan_destroy $h2 $vid
+}
+
+vlans_prepare()
+{
+	h1_vlan_create 100
+	h2_vlan_create 100
+
+	tc qdisc add dev ${h1}.100 clsact
+	tc filter add dev ${h1}.100 egress protocol ipv4 \
+		flower ip_proto icmp action skbedit priority 3
+	tc filter add dev ${h1}.100 egress protocol ipv6 \
+		flower ip_proto icmpv6 action skbedit priority 3
+}
+
+vlans_destroy()
+{
+	tc qdisc del dev ${h1}.100 clsact
+
+	h1_vlan_destroy 100
+	h2_vlan_destroy 100
+}
+
+switch_create()
+{
+	ip link set ${swp1} up
+	ip link set ${swp2} up
+
+	# Ports should trust VLAN PCP even with vlan_filtering=0
+	ip link add br0 type bridge
+	ip link set ${swp1} master br0
+	ip link set ${swp2} master br0
+	ip link set br0 up
+}
+
+switch_destroy()
+{
+	ip link del br0
+}
+
+setup_prepare()
+{
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+	switch_destroy
+
+	vrf_cleanup
+}
+
+dscp_cs_to_tos()
+{
+	local dscp_cs=$1
+
+	# https://datatracker.ietf.org/doc/html/rfc2474
+	# 4.2.2.1  The Class Selector Codepoints
+	echo $((${dscp_cs} << 5))
+}
+
+run_test()
+{
+	local test_name=$1; shift
+	local if_name=$1; shift
+	local tc=$1; shift
+	local tos=$1; shift
+	local counter_name="rx_green_prio_${tc}"
+	local ipv4_before
+	local ipv4_after
+	local ipv6_before
+	local ipv6_after
+
+	ipv4_before=$(ethtool_stats_get ${swp1} "${counter_name}")
+	ping_do ${if_name} $H2_IPV4 "-Q ${tos}"
+	ipv4_after=$(ethtool_stats_get ${swp1} "${counter_name}")
+
+	if [ $((${ipv4_after} - ${ipv4_before})) -lt ${PING_COUNT} ]; then
+		RET=1
+	else
+		RET=0
+	fi
+	log_test "IPv4 ${test_name}"
+
+	ipv6_before=$(ethtool_stats_get ${swp1} "${counter_name}")
+	ping_do ${if_name} $H2_IPV6 "-Q ${tos}"
+	ipv6_after=$(ethtool_stats_get ${swp1} "${counter_name}")
+
+	if [ $((${ipv6_after} - ${ipv6_before})) -lt ${PING_COUNT} ]; then
+		RET=1
+	else
+		RET=0
+	fi
+	log_test "IPv6 ${test_name}"
+}
+
+port_default_prio_get()
+{
+	local if_name=$1
+	local prio
+
+	prio="$(dcb -j app show dev ${if_name} default-prio | \
+		jq '.default_prio[]')"
+	if [ -z "${prio}" ]; then
+		prio=0
+	fi
+
+	echo ${prio}
+}
+
+test_port_default()
+{
+	local orig=$(port_default_prio_get ${swp1})
+	local dmac=$(mac_get ${h2})
+
+	dcb app replace dev ${swp1} default-prio 5
+
+	run_test "Port-default QoS classification" ${h1} 5 0
+
+	dcb app replace dev ${swp1} default-prio ${orig}
+}
+
+test_vlan_pcp()
+{
+	vlans_prepare
+
+	run_test "Trusted VLAN PCP QoS classification" ${h1}.100 3 0
+
+	vlans_destroy
+}
+
+test_ip_dscp()
+{
+	local port_default=$(port_default_prio_get ${swp1})
+	local tos=$(dscp_cs_to_tos 4)
+
+	dcb app add dev ${swp1} dscp-prio CS4:4
+	run_test "Trusted DSCP QoS classification" ${h1} 4 ${tos}
+	dcb app del dev ${swp1} dscp-prio CS4:4
+
+	vlans_prepare
+	run_test "Untrusted DSCP QoS classification follows VLAN PCP" \
+		${h1}.100 3 ${tos}
+	vlans_destroy
+
+	run_test "Untrusted DSCP QoS classification follows port default" \
+		${h1} ${port_default} ${tos}
+}
+
+trap cleanup EXIT
+
+ALL_TESTS="
+	test_port_default
+	test_vlan_pcp
+	test_ip_dscp
+"
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/ocelot/psfp.sh b/tools/testing/selftests/drivers/net/ocelot/psfp.sh
new file mode 100755
index 000000000..bed748dde
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/ocelot/psfp.sh
@@ -0,0 +1,327 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2021-2022 NXP
+
+# Note: On LS1028A, in lack of enough user ports, this setup requires patching
+# the device tree to use the second CPU port as a user port
+
+WAIT_TIME=1
+NUM_NETIFS=4
+STABLE_MAC_ADDRS=yes
+NETIF_CREATE=no
+lib_dir=$(dirname $0)/../../../net/forwarding
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+source $lib_dir/tsn_lib.sh
+
+UDS_ADDRESS_H1="/var/run/ptp4l_h1"
+UDS_ADDRESS_SWP1="/var/run/ptp4l_swp1"
+
+# Tunables
+NUM_PKTS=1000
+STREAM_VID=100
+STREAM_PRIO=6
+# Use a conservative cycle of 10 ms to allow the test to still pass when the
+# kernel has some extra overhead like lockdep etc
+CYCLE_TIME_NS=10000000
+# Create two Gate Control List entries, one OPEN and one CLOSE, of equal
+# durations
+GATE_DURATION_NS=$((${CYCLE_TIME_NS} / 2))
+# Give 2/3 of the cycle time to user space and 1/3 to the kernel
+FUDGE_FACTOR=$((${CYCLE_TIME_NS} / 3))
+# Shift the isochron base time by half the gate time, so that packets are
+# always received by swp1 close to the middle of the time slot, to minimize
+# inaccuracies due to network sync
+SHIFT_TIME_NS=$((${GATE_DURATION_NS} / 2))
+
+h1=${NETIFS[p1]}
+swp1=${NETIFS[p2]}
+swp2=${NETIFS[p3]}
+h2=${NETIFS[p4]}
+
+H1_IPV4="192.0.2.1"
+H2_IPV4="192.0.2.2"
+H1_IPV6="2001:db8:1::1"
+H2_IPV6="2001:db8:1::2"
+
+# Chain number exported by the ocelot driver for
+# Per-Stream Filtering and Policing filters
+PSFP()
+{
+	echo 30000
+}
+
+psfp_chain_create()
+{
+	local if_name=$1
+
+	tc qdisc add dev $if_name clsact
+
+	tc filter add dev $if_name ingress chain 0 pref 49152 flower \
+		skip_sw action goto chain $(PSFP)
+}
+
+psfp_chain_destroy()
+{
+	local if_name=$1
+
+	tc qdisc del dev $if_name clsact
+}
+
+psfp_filter_check()
+{
+	local expected=$1
+	local packets=""
+	local drops=""
+	local stats=""
+
+	stats=$(tc -j -s filter show dev ${swp1} ingress chain $(PSFP) pref 1)
+	packets=$(echo ${stats} | jq ".[1].options.actions[].stats.packets")
+	drops=$(echo ${stats} | jq ".[1].options.actions[].stats.drops")
+
+	if ! [ "${packets}" = "${expected}" ]; then
+		printf "Expected filter to match on %d packets but matched on %d instead\n" \
+			"${expected}" "${packets}"
+	fi
+
+	echo "Hardware filter reports ${drops} drops"
+}
+
+h1_create()
+{
+	simple_if_init $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 $H1_IPV4/24 $H1_IPV6/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 $H2_IPV4/24 $H2_IPV6/64
+}
+
+switch_create()
+{
+	local h2_mac_addr=$(mac_get $h2)
+
+	ip link set ${swp1} up
+	ip link set ${swp2} up
+
+	ip link add br0 type bridge vlan_filtering 1
+	ip link set ${swp1} master br0
+	ip link set ${swp2} master br0
+	ip link set br0 up
+
+	bridge vlan add dev ${swp2} vid ${STREAM_VID}
+	bridge vlan add dev ${swp1} vid ${STREAM_VID}
+	# PSFP on Ocelot requires the filter to also be added to the bridge
+	# FDB, and not be removed
+	bridge fdb add dev ${swp2} \
+		${h2_mac_addr} vlan ${STREAM_VID} static master
+
+	psfp_chain_create ${swp1}
+
+	tc filter add dev ${swp1} ingress chain $(PSFP) pref 1 \
+		protocol 802.1Q flower skip_sw \
+		dst_mac ${h2_mac_addr} vlan_id ${STREAM_VID} \
+		action gate base-time 0.000000000 \
+		sched-entry OPEN  ${GATE_DURATION_NS} -1 -1 \
+		sched-entry CLOSE ${GATE_DURATION_NS} -1 -1
+}
+
+switch_destroy()
+{
+	psfp_chain_destroy ${swp1}
+	ip link del br0
+}
+
+txtime_setup()
+{
+	local if_name=$1
+
+	tc qdisc add dev ${if_name} clsact
+	# Classify PTP on TC 7 and isochron on TC 6
+	tc filter add dev ${if_name} egress protocol 0x88f7 \
+		flower action skbedit priority 7
+	tc filter add dev ${if_name} egress protocol 802.1Q \
+		flower vlan_ethtype 0xdead action skbedit priority 6
+	tc qdisc add dev ${if_name} handle 100: parent root mqprio num_tc 8 \
+		queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
+		map 0 1 2 3 4 5 6 7 \
+		hw 1
+	# Set up TC 6 for SO_TXTIME. tc-mqprio queues count from 1.
+	tc qdisc replace dev ${if_name} parent 100:$((${STREAM_PRIO} + 1)) etf \
+		clockid CLOCK_TAI offload delta ${FUDGE_FACTOR}
+}
+
+txtime_cleanup()
+{
+	local if_name=$1
+
+	tc qdisc del dev ${if_name} root
+	tc qdisc del dev ${if_name} clsact
+}
+
+setup_prepare()
+{
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+
+	txtime_setup ${h1}
+
+	# Set up swp1 as a master PHC for h1, synchronized to the local
+	# CLOCK_REALTIME.
+	phc2sys_start ${UDS_ADDRESS_SWP1}
+
+	# Assumption true for LS1028A: h1 and h2 use the same PHC. So by
+	# synchronizing h1 to swp1 via PTP, h2 is also implicitly synchronized
+	# to swp1 (and both to CLOCK_REALTIME).
+	ptp4l_start ${h1} true ${UDS_ADDRESS_H1}
+	ptp4l_start ${swp1} false ${UDS_ADDRESS_SWP1}
+
+	# Make sure there are no filter matches at the beginning of the test
+	psfp_filter_check 0
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ptp4l_stop ${swp1}
+	ptp4l_stop ${h1}
+	phc2sys_stop
+	isochron_recv_stop
+
+	txtime_cleanup ${h1}
+
+	h2_destroy
+	h1_destroy
+	switch_destroy
+
+	vrf_cleanup
+}
+
+debug_incorrectly_dropped_packets()
+{
+	local isochron_dat=$1
+	local dropped_seqids
+	local seqid
+
+	echo "Packets incorrectly dropped:"
+
+	dropped_seqids=$(isochron report \
+		--input-file "${isochron_dat}" \
+		--printf-format "%u RX hw %T\n" \
+		--printf-args "qR" | \
+		grep 'RX hw 0.000000000' | \
+		awk '{print $1}')
+
+	for seqid in ${dropped_seqids}; do
+		isochron report \
+			--input-file "${isochron_dat}" \
+			--start ${seqid} --stop ${seqid} \
+			--printf-format "seqid %u scheduled for %T, HW TX timestamp %T\n" \
+			--printf-args "qST"
+	done
+}
+
+debug_incorrectly_received_packets()
+{
+	local isochron_dat=$1
+
+	echo "Packets incorrectly received:"
+
+	isochron report \
+		--input-file "${isochron_dat}" \
+		--printf-format "seqid %u scheduled for %T, HW TX timestamp %T, HW RX timestamp %T\n" \
+		--printf-args "qSTR" |
+		grep -v 'HW RX timestamp 0.000000000'
+}
+
+run_test()
+{
+	local base_time=$1
+	local expected=$2
+	local test_name=$3
+	local debug=$4
+	local isochron_dat="$(mktemp)"
+	local extra_args=""
+	local received
+
+	isochron_do \
+		"${h1}" \
+		"${h2}" \
+		"${UDS_ADDRESS_H1}" \
+		"" \
+		"${base_time}" \
+		"${CYCLE_TIME_NS}" \
+		"${SHIFT_TIME_NS}" \
+		"${NUM_PKTS}" \
+		"${STREAM_VID}" \
+		"${STREAM_PRIO}" \
+		"" \
+		"${isochron_dat}"
+
+	# Count all received packets by looking at the non-zero RX timestamps
+	received=$(isochron report \
+		--input-file "${isochron_dat}" \
+		--printf-format "%u\n" --printf-args "R" | \
+		grep -w -v '0' | wc -l)
+
+	if [ "${received}" = "${expected}" ]; then
+		RET=0
+	else
+		RET=1
+		echo "Expected isochron to receive ${expected} packets but received ${received}"
+	fi
+
+	log_test "${test_name}"
+
+	if [ "$RET" = "1" ]; then
+		${debug} "${isochron_dat}"
+	fi
+
+	rm ${isochron_dat} 2> /dev/null
+}
+
+test_gate_in_band()
+{
+	# Send packets in-band with the OPEN gate entry
+	run_test 0.000000000 ${NUM_PKTS} "In band" \
+		debug_incorrectly_dropped_packets
+
+	psfp_filter_check ${NUM_PKTS}
+}
+
+test_gate_out_of_band()
+{
+	# Send packets in-band with the CLOSE gate entry
+	run_test 0.005000000 0 "Out of band" \
+		debug_incorrectly_received_packets
+
+	psfp_filter_check $((2 * ${NUM_PKTS}))
+}
+
+trap cleanup EXIT
+
+ALL_TESTS="
+	test_gate_in_band
+	test_gate_out_of_band
+"
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
new file mode 100755
index 000000000..aff0a59f9
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/ocelot/tc_flower_chains.sh
@@ -0,0 +1,352 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright 2020 NXP
+
+WAIT_TIME=1
+NUM_NETIFS=4
+STABLE_MAC_ADDRS=yes
+lib_dir=$(dirname $0)/../../../net/forwarding
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+
+require_command tcpdump
+
+h1=${NETIFS[p1]}
+swp1=${NETIFS[p2]}
+swp2=${NETIFS[p3]}
+h2=${NETIFS[p4]}
+
+# Helpers to map a VCAP IS1 and VCAP IS2 lookup and policy to a chain number
+# used by the kernel driver. The numbers are:
+# VCAP IS1 lookup 0:            10000
+# VCAP IS1 lookup 1:            11000
+# VCAP IS1 lookup 2:            12000
+# VCAP IS2 lookup 0 policy 0:   20000
+# VCAP IS2 lookup 0 policy 1:   20001
+# VCAP IS2 lookup 0 policy 255: 20255
+# VCAP IS2 lookup 1 policy 0:   21000
+# VCAP IS2 lookup 1 policy 1:   21001
+# VCAP IS2 lookup 1 policy 255: 21255
+IS1()
+{
+	local lookup=$1
+
+	echo $((10000 + 1000 * lookup))
+}
+
+IS2()
+{
+	local lookup=$1
+	local pag=$2
+
+	echo $((20000 + 1000 * lookup + pag))
+}
+
+ES0()
+{
+	echo 0
+}
+
+# The Ocelot switches have a fixed ingress pipeline composed of:
+#
+# +----------------------------------------------+      +-----------------------------------------+
+# |                   VCAP IS1                   |      |                  VCAP IS2               |
+# |                                              |      |                                         |
+# | +----------+    +----------+    +----------+ |      |            +----------+    +----------+ |
+# | | Lookup 0 |    | Lookup 1 |    | Lookup 2 | | --+------> PAG 0: | Lookup 0 | -> | Lookup 1 | |
+# | +----------+ -> +----------+ -> +----------+ |   |  |            +----------+    +----------+ |
+# | |key&action|    |key&action|    |key&action| |   |  |            |key&action|    |key&action| |
+# | |key&action|    |key&action|    |key&action| |   |  |            |    ..    |    |    ..    | |
+# | |    ..    |    |    ..    |    |    ..    | |   |  |            +----------+    +----------+ |
+# | +----------+    +----------+    +----------+ |   |  |                                         |
+# |                                 selects PAG  |   |  |            +----------+    +----------+ |
+# +----------------------------------------------+   +------> PAG 1: | Lookup 0 | -> | Lookup 1 | |
+#                                                    |  |            +----------+    +----------+ |
+#                                                    |  |            |key&action|    |key&action| |
+#                                                    |  |            |    ..    |    |    ..    | |
+#                                                    |  |            +----------+    +----------+ |
+#                                                    |  |      ...                                |
+#                                                    |  |                                         |
+#                                                    |  |            +----------+    +----------+ |
+#                                                    +----> PAG 254: | Lookup 0 | -> | Lookup 1 | |
+#                                                    |  |            +----------+    +----------+ |
+#                                                    |  |            |key&action|    |key&action| |
+#                                                    |  |            |    ..    |    |    ..    | |
+#                                                    |  |            +----------+    +----------+ |
+#                                                    |  |                                         |
+#                                                    |  |            +----------+    +----------+ |
+#                                                    +----> PAG 255: | Lookup 0 | -> | Lookup 1 | |
+#                                                       |            +----------+    +----------+ |
+#                                                       |            |key&action|    |key&action| |
+#                                                       |            |    ..    |    |    ..    | |
+#                                                       |            +----------+    +----------+ |
+#                                                       +-----------------------------------------+
+#
+# Both the VCAP IS1 (Ingress Stage 1) and IS2 (Ingress Stage 2) are indexed
+# (looked up) multiple times: IS1 3 times, and IS2 2 times. Each filter
+# (key and action pair) can be configured to only match during the first, or
+# second, etc, lookup.
+#
+# During one TCAM lookup, the filter processing stops at the first entry that
+# matches, then the pipeline jumps to the next lookup.
+# The driver maps each individual lookup of each individual ingress TCAM to a
+# separate chain number. For correct rule offloading, it is mandatory that each
+# filter installed in one TCAM is terminated by a non-optional GOTO action to
+# the next lookup from the fixed pipeline.
+#
+# A chain can only be used if there is a GOTO action correctly set up from the
+# prior lookup in the processing pipeline. Setting up all chains is not
+# mandatory.
+
+# NOTE: VCAP IS1 currently uses only S1_NORMAL half keys and VCAP IS2
+# dynamically chooses between MAC_ETYPE, ARP, IP4_TCP_UDP, IP4_OTHER, which are
+# all half keys as well.
+
+create_tcam_skeleton()
+{
+	local eth=$1
+
+	tc qdisc add dev $eth clsact
+
+	# VCAP IS1 is the Ingress Classification TCAM and can offload the
+	# following actions:
+	# - skbedit priority
+	# - vlan pop
+	# - vlan modify
+	# - goto (only in lookup 2, the last IS1 lookup)
+	tc filter add dev $eth ingress chain 0 pref 49152 flower \
+		skip_sw action goto chain $(IS1 0)
+	tc filter add dev $eth ingress chain $(IS1 0) pref 49152 \
+		flower skip_sw action goto chain $(IS1 1)
+	tc filter add dev $eth ingress chain $(IS1 1) pref 49152 \
+		flower skip_sw action goto chain $(IS1 2)
+	tc filter add dev $eth ingress chain $(IS1 2) pref 49152 \
+		flower skip_sw action goto chain $(IS2 0 0)
+
+	# VCAP IS2 is the Security Enforcement ingress TCAM and can offload the
+	# following actions:
+	# - trap
+	# - drop
+	# - police
+	# The two VCAP IS2 lookups can be segmented into up to 256 groups of
+	# rules, called Policies. A Policy is selected through the Policy
+	# Association Group (PAG) action of VCAP IS1 (which is the
+	# GOTO offload).
+	tc filter add dev $eth ingress chain $(IS2 0 0) pref 49152 \
+		flower skip_sw action goto chain $(IS2 1 0)
+}
+
+setup_prepare()
+{
+	ip link set $swp1 up
+	ip link set $swp2 up
+	ip link set $h2 up
+	ip link set $h1 up
+
+	create_tcam_skeleton $swp1
+
+	ip link add br0 type bridge
+	ip link set $swp1 master br0
+	ip link set $swp2 master br0
+	ip link set br0 up
+
+	ip link add link $h1 name $h1.100 type vlan id 100
+	ip link set $h1.100 up
+
+	ip link add link $h1 name $h1.200 type vlan id 200
+	ip link set $h1.200 up
+
+	tc filter add dev $swp1 ingress chain $(IS1 1) pref 1 \
+		protocol 802.1Q flower skip_sw vlan_id 100 \
+		action vlan pop \
+		action goto chain $(IS1 2)
+
+	tc filter add dev $swp1 egress chain $(ES0) pref 1 \
+		flower skip_sw indev $swp2 \
+		action vlan push protocol 802.1Q id 100
+
+	tc filter add dev $swp1 ingress chain $(IS1 0) pref 2 \
+		protocol ipv4 flower skip_sw src_ip 10.1.1.2 \
+		action skbedit priority 7 \
+		action goto chain $(IS1 1)
+
+	tc filter add dev $swp1 ingress chain $(IS2 0 0) pref 1 \
+		protocol ipv4 flower skip_sw ip_proto udp dst_port 5201 \
+		action police rate 50mbit burst 64k conform-exceed drop/pipe \
+		action goto chain $(IS2 1 0)
+}
+
+cleanup()
+{
+	ip link del $h1.200
+	ip link del $h1.100
+	tc qdisc del dev $swp1 clsact
+	ip link del br0
+}
+
+test_vlan_pop()
+{
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	RET=0
+
+	tcpdump_start $h2
+
+	# Work around Mausezahn VLAN builder bug
+	# (https://github.com/netsniff-ng/netsniff-ng/issues/225) by using
+	# an 8021q upper
+	$MZ $h1.100 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
+
+	sleep 1
+
+	tcpdump_stop $h2
+
+	tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, ethertype IPv4"
+	check_err "$?" "untagged reception"
+
+	tcpdump_cleanup $h2
+
+	log_test "VLAN pop"
+}
+
+test_vlan_push()
+{
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	RET=0
+
+	tcpdump_start $h1.100
+
+	$MZ $h2 -q -c 1 -p 64 -a $h2_mac -b $h1_mac -t ip
+
+	sleep 1
+
+	tcpdump_stop $h1.100
+
+	tcpdump_show $h1.100 | grep -q "$h2_mac > $h1_mac"
+	check_err "$?" "tagged reception"
+
+	tcpdump_cleanup $h1.100
+
+	log_test "VLAN push"
+}
+
+test_vlan_ingress_modify()
+{
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	RET=0
+
+	ip link set br0 type bridge vlan_filtering 1
+	bridge vlan add dev $swp1 vid 200
+	bridge vlan add dev $swp1 vid 300
+	bridge vlan add dev $swp2 vid 300
+
+	tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
+		protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \
+		action vlan modify id 300 \
+		action goto chain $(IS2 0 0)
+
+	tcpdump_start $h2
+
+	$MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
+
+	sleep 1
+
+	tcpdump_stop $h2
+
+	tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300"
+	check_err "$?" "tagged reception"
+
+	tcpdump_cleanup $h2
+
+	tc filter del dev $swp1 ingress chain $(IS1 2) pref 3
+
+	bridge vlan del dev $swp1 vid 200
+	bridge vlan del dev $swp1 vid 300
+	bridge vlan del dev $swp2 vid 300
+	ip link set br0 type bridge vlan_filtering 0
+
+	log_test "Ingress VLAN modification"
+}
+
+test_vlan_egress_modify()
+{
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+
+	RET=0
+
+	tc qdisc add dev $swp2 clsact
+
+	ip link set br0 type bridge vlan_filtering 1
+	bridge vlan add dev $swp1 vid 200
+	bridge vlan add dev $swp2 vid 200
+
+	tc filter add dev $swp2 egress chain $(ES0) pref 3 \
+		protocol 802.1Q flower skip_sw vlan_id 200 vlan_prio 0 \
+		action vlan modify id 300 priority 7
+
+	tcpdump_start $h2
+
+	$MZ $h1.200 -q -c 1 -p 64 -a $h1_mac -b $h2_mac -t ip
+
+	sleep 1
+
+	tcpdump_stop $h2
+
+	tcpdump_show $h2 | grep -q "$h1_mac > $h2_mac, .* vlan 300"
+	check_err "$?" "tagged reception"
+
+	tcpdump_cleanup $h2
+
+	tc filter del dev $swp2 egress chain $(ES0) pref 3
+	tc qdisc del dev $swp2 clsact
+
+	bridge vlan del dev $swp1 vid 200
+	bridge vlan del dev $swp2 vid 200
+	ip link set br0 type bridge vlan_filtering 0
+
+	log_test "Egress VLAN modification"
+}
+
+test_skbedit_priority()
+{
+	local h1_mac=$(mac_get $h1)
+	local h2_mac=$(mac_get $h2)
+	local num_pkts=100
+
+	before=$(ethtool_stats_get $swp1 'rx_green_prio_7')
+
+	$MZ $h1 -q -c $num_pkts -p 64 -a $h1_mac -b $h2_mac -t ip -A 10.1.1.2
+
+	after=$(ethtool_stats_get $swp1 'rx_green_prio_7')
+
+	if [ $((after - before)) = $num_pkts ]; then
+		RET=0
+	else
+		RET=1
+	fi
+
+	log_test "Frame prioritization"
+}
+
+trap cleanup EXIT
+
+ALL_TESTS="
+	test_vlan_pop
+	test_vlan_push
+	test_vlan_ingress_modify
+	test_vlan_egress_modify
+	test_skbedit_priority
+"
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS