Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 283 insertions, 0 deletions

diff --git a/tools/testing/selftests/firmware/fw_fallback.sh b/tools/testing/selftests/firmware/fw_fallback.sh
new file mode 100755
index 000000000..70d18be46
--- /dev/null
+++ b/tools/testing/selftests/firmware/fw_fallback.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# This validates that the kernel will fall back to using the fallback mechanism
+# to load firmware it can't find on disk itself. We must request a firmware
+# that the kernel won't find, and any installed helper (e.g. udev) also
+# won't find so that we can do the load ourself manually.
+set -e
+
+TEST_REQS_FW_SYSFS_FALLBACK="yes"
+TEST_REQS_FW_SET_CUSTOM_PATH="no"
+TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh
+
+check_mods
+check_setup
+verify_reqs
+setup_tmp_file
+
+trap "test_finish" EXIT
+
+load_fw()
+{
+	local name="$1"
+	local file="$2"
+
+	# This will block until our load (below) has finished.
+	echo -n "$name" >"$DIR"/trigger_request &
+
+	# Give kernel a chance to react.
+	local timeout=10
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "$0: firmware interface never appeared" >&2
+			exit 1
+		fi
+	done
+
+	echo 1 >"$DIR"/"$name"/loading
+	cat "$file" >"$DIR"/"$name"/data
+	echo 0 >"$DIR"/"$name"/loading
+
+	# Wait for request to finish.
+	wait
+}
+
+load_fw_cancel()
+{
+	local name="$1"
+	local file="$2"
+
+	# This will block until our load (below) has finished.
+	echo -n "$name" >"$DIR"/trigger_request 2>/dev/null &
+
+	# Give kernel a chance to react.
+	local timeout=10
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "$0: firmware interface never appeared" >&2
+			exit 1
+		fi
+	done
+
+	echo -1 >"$DIR"/"$name"/loading
+
+	# Wait for request to finish.
+	wait
+}
+
+load_fw_custom()
+{
+	if [ ! -e "$DIR"/trigger_custom_fallback ]; then
+		echo "$0: custom fallback trigger not present, ignoring test" >&2
+		exit $ksft_skip
+	fi
+
+	local name="$1"
+	local file="$2"
+
+	echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null &
+
+	# Give kernel a chance to react.
+	local timeout=10
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "$0: firmware interface never appeared" >&2
+			exit 1
+		fi
+	done
+
+	echo 1 >"$DIR"/"$name"/loading
+	cat "$file" >"$DIR"/"$name"/data
+	echo 0 >"$DIR"/"$name"/loading
+
+	# Wait for request to finish.
+	wait
+	return 0
+}
+
+
+load_fw_custom_cancel()
+{
+	if [ ! -e "$DIR"/trigger_custom_fallback ]; then
+		echo "$0: canceling custom fallback trigger not present, ignoring test" >&2
+		exit $ksft_skip
+	fi
+
+	local name="$1"
+	local file="$2"
+
+	echo -n "$name" >"$DIR"/trigger_custom_fallback 2>/dev/null &
+
+	# Give kernel a chance to react.
+	local timeout=10
+	while [ ! -e "$DIR"/"$name"/loading ]; do
+		sleep 0.1
+		timeout=$(( $timeout - 1 ))
+		if [ "$timeout" -eq 0 ]; then
+			echo "$0: firmware interface never appeared" >&2
+			exit 1
+		fi
+	done
+
+	echo -1 >"$DIR"/"$name"/loading
+
+	# Wait for request to finish.
+	wait
+	return 0
+}
+
+load_fw_fallback_with_child()
+{
+	local name="$1"
+	local file="$2"
+
+	# This is the value already set but we want to be explicit
+	echo 4 >/sys/class/firmware/timeout
+
+	sleep 1 &
+	SECONDS_BEFORE=$(date +%s)
+	echo -n "$name" >"$DIR"/trigger_request 2>/dev/null
+	SECONDS_AFTER=$(date +%s)
+	SECONDS_DELTA=$(($SECONDS_AFTER - $SECONDS_BEFORE))
+	if [ "$SECONDS_DELTA" -lt 4 ]; then
+		RET=1
+	else
+		RET=0
+	fi
+	wait
+	return $RET
+}
+
+test_syfs_timeout()
+{
+	DEVPATH="$DIR"/"nope-$NAME"/loading
+
+	# Test failure when doing nothing (timeout works).
+	echo -n 2 >/sys/class/firmware/timeout
+	echo -n "nope-$NAME" >"$DIR"/trigger_request 2>/dev/null &
+
+	# Give the kernel some time to load the loading file, must be less
+	# than the timeout above.
+	sleep 1
+	if [ ! -f $DEVPATH ]; then
+		echo "$0: fallback mechanism immediately cancelled"
+		echo ""
+		echo "The file never appeared: $DEVPATH"
+		echo ""
+		echo "This might be a distribution udev rule setup by your distribution"
+		echo "to immediately cancel all fallback requests, this must be"
+		echo "removed before running these tests. To confirm look for"
+		echo "a firmware rule like /lib/udev/rules.d/50-firmware.rules"
+		echo "and see if you have something like this:"
+		echo ""
+		echo "SUBSYSTEM==\"firmware\", ACTION==\"add\", ATTR{loading}=\"-1\""
+		echo ""
+		echo "If you do remove this file or comment out this line before"
+		echo "proceeding with these tests."
+		exit 1
+	fi
+
+	if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was not expected to match" >&2
+		exit 1
+	else
+		echo "$0: timeout works"
+	fi
+}
+
+run_sysfs_main_tests()
+{
+	test_syfs_timeout
+	# Put timeout high enough for us to do work but not so long that failures
+	# slow down this test too much.
+	echo 4 >/sys/class/firmware/timeout
+
+	# Load this script instead of the desired firmware.
+	load_fw "$NAME" "$0"
+	if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was not expected to match" >&2
+		exit 1
+	else
+		echo "$0: firmware comparison works"
+	fi
+
+	# Do a proper load, which should work correctly.
+	load_fw "$NAME" "$FW"
+	if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was not loaded" >&2
+		exit 1
+	else
+		echo "$0: fallback mechanism works"
+	fi
+
+	load_fw_cancel "nope-$NAME" "$FW"
+	if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+		echo "$0: firmware was expected to be cancelled" >&2
+		exit 1
+	else
+		echo "$0: cancelling fallback mechanism works"
+	fi
+
+	set +e
+	load_fw_fallback_with_child "nope-signal-$NAME" "$FW"
+	if [ "$?" -eq 0 ]; then
+		echo "$0: SIGCHLD on sync ignored as expected" >&2
+	else
+		echo "$0: error - sync firmware request cancelled due to SIGCHLD" >&2
+		exit 1
+	fi
+	set -e
+}
+
+run_sysfs_custom_load_tests()
+{
+	RANDOM_FILE_PATH=$(setup_random_file)
+	RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+	if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then
+		if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then
+			echo "$0: firmware was not loaded" >&2
+			exit 1
+		else
+			echo "$0: custom fallback loading mechanism works"
+		fi
+	fi
+
+	RANDOM_FILE_PATH=$(setup_random_file)
+	RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+	if load_fw_custom "$RANDOM_FILE" "$RANDOM_FILE_PATH" ; then
+		if ! diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then
+			echo "$0: firmware was not loaded" >&2
+			exit 1
+		else
+			echo "$0: custom fallback loading mechanism works"
+		fi
+	fi
+
+	RANDOM_FILE_REAL="$RANDOM_FILE_PATH"
+	FAKE_RANDOM_FILE_PATH=$(setup_random_file_fake)
+	FAKE_RANDOM_FILE="$(basename $FAKE_RANDOM_FILE_PATH)"
+
+	if load_fw_custom_cancel "$FAKE_RANDOM_FILE" "$RANDOM_FILE_REAL" ; then
+		if diff -q "$RANDOM_FILE_PATH" /dev/test_firmware >/dev/null ; then
+			echo "$0: firmware was expected to be cancelled" >&2
+			exit 1
+		else
+			echo "$0: cancelling custom fallback mechanism works"
+		fi
+	fi
+}
+
+if [ "$HAS_FW_LOADER_USER_HELPER_FALLBACK" = "yes" ]; then
+	run_sysfs_main_tests
+fi
+
+run_sysfs_custom_load_tests
+
+exit 0