summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI/stable
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/stable')
-rw-r--r--Documentation/ABI/stable/firewire-cdev111
-rw-r--r--Documentation/ABI/stable/o2cb10
-rw-r--r--Documentation/ABI/stable/procfs-audit_loginuid27
-rw-r--r--Documentation/ABI/stable/syscalls10
-rw-r--r--Documentation/ABI/stable/sysfs-acpi-pmprofile26
-rw-r--r--Documentation/ABI/stable/sysfs-block734
-rw-r--r--Documentation/ABI/stable/sysfs-bus-firewire136
-rw-r--r--Documentation/ABI/stable/sysfs-bus-fsl-mc19
-rw-r--r--Documentation/ABI/stable/sysfs-bus-mhi31
-rw-r--r--Documentation/ABI/stable/sysfs-bus-nvmem22
-rw-r--r--Documentation/ABI/stable/sysfs-bus-usb142
-rw-r--r--Documentation/ABI/stable/sysfs-bus-vmbus187
-rw-r--r--Documentation/ABI/stable/sysfs-bus-w112
-rw-r--r--Documentation/ABI/stable/sysfs-bus-xen-backend84
-rw-r--r--Documentation/ABI/stable/sysfs-class-backlight57
-rw-r--r--Documentation/ABI/stable/sysfs-class-infiniband784
-rw-r--r--Documentation/ABI/stable/sysfs-class-rfkill93
-rw-r--r--Documentation/ABI/stable/sysfs-class-tpm210
-rw-r--r--Documentation/ABI/stable/sysfs-class-ubi221
-rw-r--r--Documentation/ABI/stable/sysfs-class-udc93
-rw-r--r--Documentation/ABI/stable/sysfs-devices32
-rw-r--r--Documentation/ABI/stable/sysfs-devices-node184
-rw-r--r--Documentation/ABI/stable/sysfs-devices-system-cpu127
-rw-r--r--Documentation/ABI/stable/sysfs-devices-system-xen_memory86
-rw-r--r--Documentation/ABI/stable/sysfs-driver-aspeed-vuart24
-rw-r--r--Documentation/ABI/stable/sysfs-driver-dma-idxd304
-rw-r--r--Documentation/ABI/stable/sysfs-driver-dma-ioatdma30
-rw-r--r--Documentation/ABI/stable/sysfs-driver-firmware-zynqmp256
-rw-r--r--Documentation/ABI/stable/sysfs-driver-ib_srp192
-rw-r--r--Documentation/ABI/stable/sysfs-driver-mlxreg-io544
-rw-r--r--Documentation/ABI/stable/sysfs-driver-qla2xxx8
-rw-r--r--Documentation/ABI/stable/sysfs-driver-speakup386
-rw-r--r--Documentation/ABI/stable/sysfs-driver-usb-usbtmc27
-rw-r--r--Documentation/ABI/stable/sysfs-driver-w1_ds243813
-rw-r--r--Documentation/ABI/stable/sysfs-driver-w1_ds28e0415
-rw-r--r--Documentation/ABI/stable/sysfs-driver-w1_ds28ea006
-rw-r--r--Documentation/ABI/stable/sysfs-firmware-efi-vars79
-rw-r--r--Documentation/ABI/stable/sysfs-firmware-opal-dump46
-rw-r--r--Documentation/ABI/stable/sysfs-firmware-opal-elog62
-rw-r--r--Documentation/ABI/stable/sysfs-fs-orangefs87
-rw-r--r--Documentation/ABI/stable/sysfs-hypervisor-xen122
-rw-r--r--Documentation/ABI/stable/sysfs-kernel-notes5
-rw-r--r--Documentation/ABI/stable/sysfs-module47
-rw-r--r--Documentation/ABI/stable/sysfs-transport-srp58
-rw-r--r--Documentation/ABI/stable/thermal-notification4
-rw-r--r--Documentation/ABI/stable/vdso35
46 files changed, 5788 insertions, 0 deletions
diff --git a/Documentation/ABI/stable/firewire-cdev b/Documentation/ABI/stable/firewire-cdev
new file mode 100644
index 000000000..261f85b13
--- /dev/null
+++ b/Documentation/ABI/stable/firewire-cdev
@@ -0,0 +1,111 @@
+What: /dev/fw[0-9]+
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ The character device files /dev/fw* are the interface between
+ firewire-core and IEEE 1394 device drivers implemented in
+ userspace. The ioctl(2)- and read(2)-based ABI is defined and
+ documented in <linux/firewire-cdev.h>.
+
+ This ABI offers most of the features which firewire-core also
+ exposes to kernelspace IEEE 1394 drivers.
+
+ Each /dev/fw* is associated with one IEEE 1394 node, which can
+ be remote or local nodes. Operations on a /dev/fw* file have
+ different scope:
+
+ - The 1394 node which is associated with the file:
+
+ - Asynchronous request transmission
+ - Get the Configuration ROM
+ - Query node ID
+ - Query maximum speed of the path between this node
+ and local node
+
+ - The 1394 bus (i.e. "card") to which the node is attached to:
+
+ - Isochronous stream transmission and reception
+ - Asynchronous stream transmission and reception
+ - Asynchronous broadcast request transmission
+ - PHY packet transmission and reception
+ - Allocate, reallocate, deallocate isochronous
+ resources (channels, bandwidth) at the bus's IRM
+ - Query node IDs of local node, root node, IRM, bus
+ manager
+ - Query cycle time
+ - Bus reset initiation, bus reset event reception
+
+ - All 1394 buses:
+
+ - Allocation of IEEE 1212 address ranges on the local
+ link layers, reception of inbound requests to such
+ an address range, asynchronous response transmission
+ to inbound requests
+ - Addition of descriptors or directories to the local
+ nodes' Configuration ROM
+
+ Due to the different scope of operations and in order to let
+ userland implement different access permission models, some
+ operations are restricted to /dev/fw* files that are associated
+ with a local node:
+
+ - Addition of descriptors or directories to the local
+ nodes' Configuration ROM
+ - PHY packet transmission and reception
+
+ A /dev/fw* file remains associated with one particular node
+ during its entire life time. Bus topology changes, and hence
+ node ID changes, are tracked by firewire-core. ABI users do not
+ need to be aware of topology.
+
+ The following file operations are supported:
+
+ open(2)
+ Currently the only useful flags are O_RDWR.
+
+ ioctl(2)
+ Initiate various actions. Some take immediate effect, others
+ are performed asynchronously while or after the ioctl returns.
+ See the inline documentation in <linux/firewire-cdev.h> for
+ descriptions of all ioctls.
+
+ poll(2), select(2), epoll_wait(2) etc.
+ Watch for events to become available to be read.
+
+ read(2)
+ Receive various events. There are solicited events like
+ outbound asynchronous transaction completion or isochronous
+ buffer completion, and unsolicited events such as bus resets,
+ request reception, or PHY packet reception. Always use a read
+ buffer which is large enough to receive the largest event that
+ could ever arrive. See <linux/firewire-cdev.h> for descriptions
+ of all event types and for which ioctls affect reception of
+ events.
+
+ mmap(2)
+ Allocate a DMA buffer for isochronous reception or transmission
+ and map it into the process address space. The arguments should
+ be used as follows: addr = NULL, length = the desired buffer
+ size, i.e. number of packets times size of largest packet,
+ prot = at least PROT_READ for reception and at least PROT_WRITE
+ for transmission, flags = MAP_SHARED, fd = the handle to the
+ /dev/fw*, offset = 0.
+
+ Isochronous reception works in packet-per-buffer fashion except
+ for multichannel reception which works in buffer-fill mode.
+
+ munmap(2)
+ Unmap the isochronous I/O buffer from the process address space.
+
+ close(2)
+ Besides stopping and freeing I/O contexts that were associated
+ with the file descriptor, back out any changes to the local
+ nodes' Configuration ROM. Deallocate isochronous channels and
+ bandwidth at the IRM that were marked for kernel-assisted
+ re- and deallocation.
+
+Users: libraw1394;
+ libdc1394;
+ libhinawa;
+ tools like linux-firewire-utils, fwhack, ...
diff --git a/Documentation/ABI/stable/o2cb b/Documentation/ABI/stable/o2cb
new file mode 100644
index 000000000..b62a967f0
--- /dev/null
+++ b/Documentation/ABI/stable/o2cb
@@ -0,0 +1,10 @@
+What: /sys/fs/o2cb/
+Date: Dec 2005
+KernelVersion: 2.6.16
+Contact: ocfs2-devel@oss.oracle.com
+Description: Ocfs2-tools looks at 'interface-revision' for versioning
+ information. Each logmask/ file controls a set of debug prints
+ and can be written into with the strings "allow", "deny", or
+ "off". Reading the file returns the current state.
+Users: ocfs2-tools. It's sufficient to mail proposed changes to
+ ocfs2-devel@oss.oracle.com.
diff --git a/Documentation/ABI/stable/procfs-audit_loginuid b/Documentation/ABI/stable/procfs-audit_loginuid
new file mode 100644
index 000000000..cda405178
--- /dev/null
+++ b/Documentation/ABI/stable/procfs-audit_loginuid
@@ -0,0 +1,27 @@
+What: Audit Login UID
+Date: 2005-02-01
+KernelVersion: 2.6.11-rc2 1e2d1492e178 ("[PATCH] audit: handle loginuid through proc")
+Contact: linux-audit@redhat.com
+Users: audit and login applications
+Description:
+ The /proc/$pid/loginuid pseudofile is written to set and
+ read to get the audit login UID of process $pid as a
+ decimal unsigned int (%u, u32). If it is unset,
+ permissions are not needed to set it. The accessor must
+ have CAP_AUDIT_CONTROL in the initial user namespace to
+ write it if it has been set. It cannot be written again
+ if AUDIT_FEATURE_LOGINUID_IMMUTABLE is enabled. It
+ cannot be unset if AUDIT_FEATURE_ONLY_UNSET_LOGINUID is
+ enabled.
+
+What: Audit Login Session ID
+Date: 2008-03-13
+KernelVersion: 2.6.25-rc7 1e0bd7550ea9 ("[PATCH] export sessionid alongside the loginuid in procfs")
+Contact: linux-audit@redhat.com
+Users: audit and login applications
+Description:
+ The /proc/$pid/sessionid pseudofile is read to get the
+ audit login session ID of process $pid as a decimal
+ unsigned int (%u, u32). It is set automatically,
+ serially assigned with each new login.
+
diff --git a/Documentation/ABI/stable/syscalls b/Documentation/ABI/stable/syscalls
new file mode 100644
index 000000000..c3ae3e7d6
--- /dev/null
+++ b/Documentation/ABI/stable/syscalls
@@ -0,0 +1,10 @@
+What: The kernel syscall interface
+Description:
+ This interface matches much of the POSIX interface and is based
+ on it and other Unix based interfaces. It will only be added to
+ over time, and not have things removed from it.
+
+ Note that this interface is different for every architecture
+ that Linux supports. Please see the architecture-specific
+ documentation for details on the syscall numbers that are to be
+ mapped to each syscall.
diff --git a/Documentation/ABI/stable/sysfs-acpi-pmprofile b/Documentation/ABI/stable/sysfs-acpi-pmprofile
new file mode 100644
index 000000000..2d6314f0e
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -0,0 +1,26 @@
+What: /sys/firmware/acpi/pm_profile
+Date: 03-Nov-2011
+KernelVersion: v3.2
+Contact: linux-acpi@vger.kernel.org
+Description: The ACPI pm_profile sysfs interface exports the platform
+ power management (and performance) requirement expectations
+ as provided by BIOS. The integer value is directly passed as
+ retrieved from the FADT ACPI table.
+
+Values: For possible values see ACPI specification:
+ 5.2.9 Fixed ACPI Description Table (FADT)
+ Field: Preferred_PM_Profile
+
+ Currently these values are defined by spec:
+
+ == =================
+ 0 Unspecified
+ 1 Desktop
+ 2 Mobile
+ 3 Workstation
+ 4 Enterprise Server
+ 5 SOHO Server
+ 6 Appliance PC
+ 7 Performance Server
+ >7 Reserved
+ == =================
diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block
new file mode 100644
index 000000000..cd14ecb3c
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-block
@@ -0,0 +1,734 @@
+What: /sys/block/<disk>/alignment_offset
+Date: April 2009
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Storage devices may report a physical block size that is
+ bigger than the logical block size (for instance a drive
+ with 4KB physical sectors exposing 512-byte logical
+ blocks to the operating system). This parameter
+ indicates how many bytes the beginning of the device is
+ offset from the disk's natural alignment.
+
+
+What: /sys/block/<disk>/discard_alignment
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Devices that support discard functionality may
+ internally allocate space in units that are bigger than
+ the exported logical block size. The discard_alignment
+ parameter indicates how many bytes the beginning of the
+ device is offset from the internal allocation unit's
+ natural alignment.
+
+
+What: /sys/block/<disk>/diskseq
+Date: February 2021
+Contact: Matteo Croce <mcroce@microsoft.com>
+Description:
+ The /sys/block/<disk>/diskseq files reports the disk
+ sequence number, which is a monotonically increasing
+ number assigned to every drive.
+ Some devices, like the loop device, refresh such number
+ every time the backing file is changed.
+ The value type is 64 bit unsigned.
+
+
+What: /sys/block/<disk>/inflight
+Date: October 2009
+Contact: Jens Axboe <axboe@kernel.dk>, Nikanth Karthikesan <knikanth@suse.de>
+Description:
+ Reports the number of I/O requests currently in progress
+ (pending / in flight) in a device driver. This can be less
+ than the number of requests queued in the block device queue.
+ The report contains 2 fields: one for read requests
+ and one for write requests.
+ The value type is unsigned int.
+ Cf. Documentation/block/stat.rst which contains a single value for
+ requests in flight.
+ This is related to /sys/block/<disk>/queue/nr_requests
+ and for SCSI device also its queue_depth.
+
+
+What: /sys/block/<disk>/integrity/device_is_integrity_capable
+Date: July 2014
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Indicates whether a storage device is capable of storing
+ integrity metadata. Set if the device is T10 PI-capable.
+
+
+What: /sys/block/<disk>/integrity/format
+Date: June 2008
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Metadata format for integrity capable block device.
+ E.g. T10-DIF-TYPE1-CRC.
+
+
+What: /sys/block/<disk>/integrity/protection_interval_bytes
+Date: July 2015
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Describes the number of data bytes which are protected
+ by one integrity tuple. Typically the device's logical
+ block size.
+
+
+What: /sys/block/<disk>/integrity/read_verify
+Date: June 2008
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Indicates whether the block layer should verify the
+ integrity of read requests serviced by devices that
+ support sending integrity metadata.
+
+
+What: /sys/block/<disk>/integrity/tag_size
+Date: June 2008
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Number of bytes of integrity tag space available per
+ 512 bytes of data.
+
+
+What: /sys/block/<disk>/integrity/write_generate
+Date: June 2008
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Indicates whether the block layer should automatically
+ generate checksums for write requests bound for
+ devices that support receiving integrity metadata.
+
+
+What: /sys/block/<disk>/<partition>/alignment_offset
+Date: April 2009
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Storage devices may report a physical block size that is
+ bigger than the logical block size (for instance a drive
+ with 4KB physical sectors exposing 512-byte logical
+ blocks to the operating system). This parameter
+ indicates how many bytes the beginning of the partition
+ is offset from the disk's natural alignment.
+
+
+What: /sys/block/<disk>/<partition>/discard_alignment
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ Devices that support discard functionality may
+ internally allocate space in units that are bigger than
+ the exported logical block size. The discard_alignment
+ parameter indicates how many bytes the beginning of the
+ partition is offset from the internal allocation unit's
+ natural alignment.
+
+
+What: /sys/block/<disk>/<partition>/stat
+Date: February 2008
+Contact: Jerome Marchand <jmarchan@redhat.com>
+Description:
+ The /sys/block/<disk>/<partition>/stat files display the
+ I/O statistics of partition <partition>. The format is the
+ same as the format of /sys/block/<disk>/stat.
+
+
+What: /sys/block/<disk>/queue/add_random
+Date: June 2010
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] This file allows to turn off the disk entropy contribution.
+ Default value of this file is '1'(on).
+
+
+What: /sys/block/<disk>/queue/chunk_sectors
+Date: September 2016
+Contact: Hannes Reinecke <hare@suse.com>
+Description:
+ [RO] chunk_sectors has different meaning depending on the type
+ of the disk. For a RAID device (dm-raid), chunk_sectors
+ indicates the size in 512B sectors of the RAID volume stripe
+ segment. For a zoned block device, either host-aware or
+ host-managed, chunk_sectors indicates the size in 512B sectors
+ of the zones of the device, with the eventual exception of the
+ last zone of the device which may be smaller.
+
+
+What: /sys/block/<disk>/queue/crypto/
+Date: February 2022
+Contact: linux-block@vger.kernel.org
+Description:
+ The presence of this subdirectory of /sys/block/<disk>/queue/
+ indicates that the device supports inline encryption. This
+ subdirectory contains files which describe the inline encryption
+ capabilities of the device. For more information about inline
+ encryption, refer to Documentation/block/inline-encryption.rst.
+
+
+What: /sys/block/<disk>/queue/crypto/max_dun_bits
+Date: February 2022
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] This file shows the maximum length, in bits, of data unit
+ numbers accepted by the device in inline encryption requests.
+
+
+What: /sys/block/<disk>/queue/crypto/modes/<mode>
+Date: February 2022
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] For each crypto mode (i.e., encryption/decryption
+ algorithm) the device supports with inline encryption, a file
+ will exist at this location. It will contain a hexadecimal
+ number that is a bitmask of the supported data unit sizes, in
+ bytes, for that crypto mode.
+
+ Currently, the crypto modes that may be supported are:
+
+ * AES-256-XTS
+ * AES-128-CBC-ESSIV
+ * Adiantum
+
+ For example, if a device supports AES-256-XTS inline encryption
+ with data unit sizes of 512 and 4096 bytes, the file
+ /sys/block/<disk>/queue/crypto/modes/AES-256-XTS will exist and
+ will contain "0x1200".
+
+
+What: /sys/block/<disk>/queue/crypto/num_keyslots
+Date: February 2022
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] This file shows the number of keyslots the device has for
+ use with inline encryption.
+
+
+What: /sys/block/<disk>/queue/dax
+Date: June 2016
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] This file indicates whether the device supports Direct
+ Access (DAX), used by CPU-addressable storage to bypass the
+ pagecache. It shows '1' if true, '0' if not.
+
+
+What: /sys/block/<disk>/queue/discard_granularity
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ [RO] Devices that support discard functionality may internally
+ allocate space using units that are bigger than the logical
+ block size. The discard_granularity parameter indicates the size
+ of the internal allocation unit in bytes if reported by the
+ device. Otherwise the discard_granularity will be set to match
+ the device's physical block size. A discard_granularity of 0
+ means that the device does not support discard functionality.
+
+
+What: /sys/block/<disk>/queue/discard_max_bytes
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ [RW] While discard_max_hw_bytes is the hardware limit for the
+ device, this setting is the software limit. Some devices exhibit
+ large latencies when large discards are issued, setting this
+ value lower will make Linux issue smaller discards and
+ potentially help reduce latencies induced by large discard
+ operations.
+
+
+What: /sys/block/<disk>/queue/discard_max_hw_bytes
+Date: July 2015
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] Devices that support discard functionality may have
+ internal limits on the number of bytes that can be trimmed or
+ unmapped in a single operation. The `discard_max_hw_bytes`
+ parameter is set by the device driver to the maximum number of
+ bytes that can be discarded in a single operation. Discard
+ requests issued to the device must not exceed this limit. A
+ `discard_max_hw_bytes` value of 0 means that the device does not
+ support discard functionality.
+
+
+What: /sys/block/<disk>/queue/discard_zeroes_data
+Date: May 2011
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ [RO] Will always return 0. Don't rely on any specific behavior
+ for discards, and don't read this file.
+
+
+What: /sys/block/<disk>/queue/dma_alignment
+Date: May 2022
+Contact: linux-block@vger.kernel.org
+Description:
+ Reports the alignment that user space addresses must have to be
+ used for raw block device access with O_DIRECT and other driver
+ specific passthrough mechanisms.
+
+
+What: /sys/block/<disk>/queue/fua
+Date: May 2018
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] Whether or not the block driver supports the FUA flag for
+ write requests. FUA stands for Force Unit Access. If the FUA
+ flag is set that means that write requests must bypass the
+ volatile cache of the storage device.
+
+
+What: /sys/block/<disk>/queue/hw_sector_size
+Date: January 2008
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] This is the hardware sector size of the device, in bytes.
+
+
+What: /sys/block/<disk>/queue/independent_access_ranges/
+Date: October 2021
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] The presence of this sub-directory of the
+ /sys/block/xxx/queue/ directory indicates that the device is
+ capable of executing requests targeting different sector ranges
+ in parallel. For instance, single LUN multi-actuator hard-disks
+ will have an independent_access_ranges directory if the device
+ correctly advertizes the sector ranges of its actuators.
+
+ The independent_access_ranges directory contains one directory
+ per access range, with each range described using the sector
+ (RO) attribute file to indicate the first sector of the range
+ and the nr_sectors (RO) attribute file to indicate the total
+ number of sectors in the range starting from the first sector of
+ the range. For example, a dual-actuator hard-disk will have the
+ following independent_access_ranges entries.::
+
+ $ tree /sys/block/<disk>/queue/independent_access_ranges/
+ /sys/block/<disk>/queue/independent_access_ranges/
+ |-- 0
+ | |-- nr_sectors
+ | `-- sector
+ `-- 1
+ |-- nr_sectors
+ `-- sector
+
+ The sector and nr_sectors attributes use 512B sector unit,
+ regardless of the actual block size of the device. Independent
+ access ranges do not overlap and include all sectors within the
+ device capacity. The access ranges are numbered in increasing
+ order of the range start sector, that is, the sector attribute
+ of range 0 always has the value 0.
+
+
+What: /sys/block/<disk>/queue/io_poll
+Date: November 2015
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] When read, this file shows whether polling is enabled (1)
+ or disabled (0). Writing '0' to this file will disable polling
+ for this device. Writing any non-zero value will enable this
+ feature.
+
+
+What: /sys/block/<disk>/queue/io_poll_delay
+Date: November 2016
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] If polling is enabled, this controls what kind of polling
+ will be performed. It defaults to -1, which is classic polling.
+ In this mode, the CPU will repeatedly ask for completions
+ without giving up any time. If set to 0, a hybrid polling mode
+ is used, where the kernel will attempt to make an educated guess
+ at when the IO will complete. Based on this guess, the kernel
+ will put the process issuing IO to sleep for an amount of time,
+ before entering a classic poll loop. This mode might be a little
+ slower than pure classic polling, but it will be more efficient.
+ If set to a value larger than 0, the kernel will put the process
+ issuing IO to sleep for this amount of microseconds before
+ entering classic polling.
+
+
+What: /sys/block/<disk>/queue/io_timeout
+Date: November 2018
+Contact: Weiping Zhang <zhangweiping@didiglobal.com>
+Description:
+ [RW] io_timeout is the request timeout in milliseconds. If a
+ request does not complete in this time then the block driver
+ timeout handler is invoked. That timeout handler can decide to
+ retry the request, to fail it or to start a device recovery
+ strategy.
+
+
+What: /sys/block/<disk>/queue/iostats
+Date: January 2009
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] This file is used to control (on/off) the iostats
+ accounting of the disk.
+
+
+What: /sys/block/<disk>/queue/logical_block_size
+Date: May 2009
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ [RO] This is the smallest unit the storage device can address.
+ It is typically 512 bytes.
+
+
+What: /sys/block/<disk>/queue/max_active_zones
+Date: July 2020
+Contact: Niklas Cassel <niklas.cassel@wdc.com>
+Description:
+ [RO] For zoned block devices (zoned attribute indicating
+ "host-managed" or "host-aware"), the sum of zones belonging to
+ any of the zone states: EXPLICIT OPEN, IMPLICIT OPEN or CLOSED,
+ is limited by this value. If this value is 0, there is no limit.
+
+ If the host attempts to exceed this limit, the driver should
+ report this error with BLK_STS_ZONE_ACTIVE_RESOURCE, which user
+ space may see as the EOVERFLOW errno.
+
+
+What: /sys/block/<disk>/queue/max_discard_segments
+Date: February 2017
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] The maximum number of DMA scatter/gather entries in a
+ discard request.
+
+
+What: /sys/block/<disk>/queue/max_hw_sectors_kb
+Date: September 2004
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] This is the maximum number of kilobytes supported in a
+ single data transfer.
+
+
+What: /sys/block/<disk>/queue/max_integrity_segments
+Date: September 2010
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] Maximum number of elements in a DMA scatter/gather list
+ with integrity data that will be submitted by the block layer
+ core to the associated block driver.
+
+
+What: /sys/block/<disk>/queue/max_open_zones
+Date: July 2020
+Contact: Niklas Cassel <niklas.cassel@wdc.com>
+Description:
+ [RO] For zoned block devices (zoned attribute indicating
+ "host-managed" or "host-aware"), the sum of zones belonging to
+ any of the zone states: EXPLICIT OPEN or IMPLICIT OPEN, is
+ limited by this value. If this value is 0, there is no limit.
+
+
+What: /sys/block/<disk>/queue/max_sectors_kb
+Date: September 2004
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] This is the maximum number of kilobytes that the block
+ layer will allow for a filesystem request. Must be smaller than
+ or equal to the maximum size allowed by the hardware.
+
+
+What: /sys/block/<disk>/queue/max_segment_size
+Date: March 2010
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] Maximum size in bytes of a single element in a DMA
+ scatter/gather list.
+
+
+What: /sys/block/<disk>/queue/max_segments
+Date: March 2010
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] Maximum number of elements in a DMA scatter/gather list
+ that is submitted to the associated block driver.
+
+
+What: /sys/block/<disk>/queue/minimum_io_size
+Date: April 2009
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ [RO] Storage devices may report a granularity or preferred
+ minimum I/O size which is the smallest request the device can
+ perform without incurring a performance penalty. For disk
+ drives this is often the physical block size. For RAID arrays
+ it is often the stripe chunk size. A properly aligned multiple
+ of minimum_io_size is the preferred request size for workloads
+ where a high number of I/O operations is desired.
+
+
+What: /sys/block/<disk>/queue/nomerges
+Date: January 2010
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] Standard I/O elevator operations include attempts to merge
+ contiguous I/Os. For known random I/O loads these attempts will
+ always fail and result in extra cycles being spent in the
+ kernel. This allows one to turn off this behavior on one of two
+ ways: When set to 1, complex merge checks are disabled, but the
+ simple one-shot merges with the previous I/O request are
+ enabled. When set to 2, all merge tries are disabled. The
+ default value is 0 - which enables all types of merge tries.
+
+
+What: /sys/block/<disk>/queue/nr_requests
+Date: July 2003
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] This controls how many requests may be allocated in the
+ block layer for read or write requests. Note that the total
+ allocated number may be twice this amount, since it applies only
+ to reads or writes (not the accumulated sum).
+
+ To avoid priority inversion through request starvation, a
+ request queue maintains a separate request pool per each cgroup
+ when CONFIG_BLK_CGROUP is enabled, and this parameter applies to
+ each such per-block-cgroup request pool. IOW, if there are N
+ block cgroups, each request queue may have up to N request
+ pools, each independently regulated by nr_requests.
+
+
+What: /sys/block/<disk>/queue/nr_zones
+Date: November 2018
+Contact: Damien Le Moal <damien.lemoal@wdc.com>
+Description:
+ [RO] nr_zones indicates the total number of zones of a zoned
+ block device ("host-aware" or "host-managed" zone model). For
+ regular block devices, the value is always 0.
+
+
+What: /sys/block/<disk>/queue/optimal_io_size
+Date: April 2009
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ [RO] Storage devices may report an optimal I/O size, which is
+ the device's preferred unit for sustained I/O. This is rarely
+ reported for disk drives. For RAID arrays it is usually the
+ stripe width or the internal track size. A properly aligned
+ multiple of optimal_io_size is the preferred request size for
+ workloads where sustained throughput is desired. If no optimal
+ I/O size is reported this file contains 0.
+
+
+What: /sys/block/<disk>/queue/physical_block_size
+Date: May 2009
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ [RO] This is the smallest unit a physical storage device can
+ write atomically. It is usually the same as the logical block
+ size but may be bigger. One example is SATA drives with 4KB
+ sectors that expose a 512-byte logical block size to the
+ operating system. For stacked block devices the
+ physical_block_size variable contains the maximum
+ physical_block_size of the component devices.
+
+
+What: /sys/block/<disk>/queue/read_ahead_kb
+Date: May 2004
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] Maximum number of kilobytes to read-ahead for filesystems
+ on this block device.
+
+
+What: /sys/block/<disk>/queue/rotational
+Date: January 2009
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] This file is used to stat if the device is of rotational
+ type or non-rotational type.
+
+
+What: /sys/block/<disk>/queue/rq_affinity
+Date: September 2008
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] If this option is '1', the block layer will migrate request
+ completions to the cpu "group" that originally submitted the
+ request. For some workloads this provides a significant
+ reduction in CPU cycles due to caching effects.
+
+ For storage configurations that need to maximize distribution of
+ completion processing setting this option to '2' forces the
+ completion to run on the requesting cpu (bypassing the "group"
+ aggregation logic).
+
+
+What: /sys/block/<disk>/queue/scheduler
+Date: October 2004
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] When read, this file will display the current and available
+ IO schedulers for this block device. The currently active IO
+ scheduler will be enclosed in [] brackets. Writing an IO
+ scheduler name to this file will switch control of this block
+ device to that new IO scheduler. Note that writing an IO
+ scheduler name to this file will attempt to load that IO
+ scheduler module, if it isn't already present in the system.
+
+
+What: /sys/block/<disk>/queue/stable_writes
+Date: September 2020
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] This file will contain '1' if memory must not be modified
+ while it is being used in a write request to this device. When
+ this is the case and the kernel is performing writeback of a
+ page, the kernel will wait for writeback to complete before
+ allowing the page to be modified again, rather than allowing
+ immediate modification as is normally the case. This
+ restriction arises when the device accesses the memory multiple
+ times where the same data must be seen every time -- for
+ example, once to calculate a checksum and once to actually write
+ the data. If no such restriction exists, this file will contain
+ '0'. This file is writable for testing purposes.
+
+
+What: /sys/block/<disk>/queue/throttle_sample_time
+Date: March 2017
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] This is the time window that blk-throttle samples data, in
+ millisecond. blk-throttle makes decision based on the
+ samplings. Lower time means cgroups have more smooth throughput,
+ but higher CPU overhead. This exists only when
+ CONFIG_BLK_DEV_THROTTLING_LOW is enabled.
+
+
+What: /sys/block/<disk>/queue/virt_boundary_mask
+Date: April 2021
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] This file shows the I/O segment memory alignment mask for
+ the block device. I/O requests to this device will be split
+ between segments wherever either the memory address of the end
+ of the previous segment or the memory address of the beginning
+ of the current segment is not aligned to virt_boundary_mask + 1
+ bytes.
+
+
+What: /sys/block/<disk>/queue/wbt_lat_usec
+Date: November 2016
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] If the device is registered for writeback throttling, then
+ this file shows the target minimum read latency. If this latency
+ is exceeded in a given window of time (see wb_window_usec), then
+ the writeback throttling will start scaling back writes. Writing
+ a value of '0' to this file disables the feature. Writing a
+ value of '-1' to this file resets the value to the default
+ setting.
+
+
+What: /sys/block/<disk>/queue/write_cache
+Date: April 2016
+Contact: linux-block@vger.kernel.org
+Description:
+ [RW] When read, this file will display whether the device has
+ write back caching enabled or not. It will return "write back"
+ for the former case, and "write through" for the latter. Writing
+ to this file can change the kernels view of the device, but it
+ doesn't alter the device state. This means that it might not be
+ safe to toggle the setting from "write back" to "write through",
+ since that will also eliminate cache flushes issued by the
+ kernel.
+
+
+What: /sys/block/<disk>/queue/write_same_max_bytes
+Date: January 2012
+Contact: Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+ [RO] Some devices support a write same operation in which a
+ single data block can be written to a range of several
+ contiguous blocks on storage. This can be used to wipe areas on
+ disk or to initialize drives in a RAID configuration.
+ write_same_max_bytes indicates how many bytes can be written in
+ a single write same command. If write_same_max_bytes is 0, write
+ same is not supported by the device.
+
+
+What: /sys/block/<disk>/queue/write_zeroes_max_bytes
+Date: November 2016
+Contact: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
+Description:
+ [RO] Devices that support write zeroes operation in which a
+ single request can be issued to zero out the range of contiguous
+ blocks on storage without having any payload in the request.
+ This can be used to optimize writing zeroes to the devices.
+ write_zeroes_max_bytes indicates how many bytes can be written
+ in a single write zeroes command. If write_zeroes_max_bytes is
+ 0, write zeroes is not supported by the device.
+
+
+What: /sys/block/<disk>/queue/zone_append_max_bytes
+Date: May 2020
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] This is the maximum number of bytes that can be written to
+ a sequential zone of a zoned block device using a zone append
+ write operation (REQ_OP_ZONE_APPEND). This value is always 0 for
+ regular block devices.
+
+
+What: /sys/block/<disk>/queue/zone_write_granularity
+Date: January 2021
+Contact: linux-block@vger.kernel.org
+Description:
+ [RO] This indicates the alignment constraint, in bytes, for
+ write operations in sequential zones of zoned block devices
+ (devices with a zoned attributed that reports "host-managed" or
+ "host-aware"). This value is always 0 for regular block devices.
+
+
+What: /sys/block/<disk>/queue/zoned
+Date: September 2016
+Contact: Damien Le Moal <damien.lemoal@wdc.com>
+Description:
+ [RO] zoned indicates if the device is a zoned block device and
+ the zone model of the device if it is indeed zoned. The
+ possible values indicated by zoned are "none" for regular block
+ devices and "host-aware" or "host-managed" for zoned block
+ devices. The characteristics of host-aware and host-managed
+ zoned block devices are described in the ZBC (Zoned Block
+ Commands) and ZAC (Zoned Device ATA Command Set) standards.
+ These standards also define the "drive-managed" zone model.
+ However, since drive-managed zoned block devices do not support
+ zone commands, they will be treated as regular block devices and
+ zoned will report "none".
+
+
+What: /sys/block/<disk>/stat
+Date: February 2008
+Contact: Jerome Marchand <jmarchan@redhat.com>
+Description:
+ The /sys/block/<disk>/stat files displays the I/O
+ statistics of disk <disk>. They contain 11 fields:
+
+ == ==============================================
+ 1 reads completed successfully
+ 2 reads merged
+ 3 sectors read
+ 4 time spent reading (ms)
+ 5 writes completed
+ 6 writes merged
+ 7 sectors written
+ 8 time spent writing (ms)
+ 9 I/Os currently in progress
+ 10 time spent doing I/Os (ms)
+ 11 weighted time spent doing I/Os (ms)
+ 12 discards completed
+ 13 discards merged
+ 14 sectors discarded
+ 15 time spent discarding (ms)
+ 16 flush requests completed
+ 17 time spent flushing (ms)
+ == ==============================================
+
+ For more details refer Documentation/admin-guide/iostats.rst
diff --git a/Documentation/ABI/stable/sysfs-bus-firewire b/Documentation/ABI/stable/sysfs-bus-firewire
new file mode 100644
index 000000000..9ac9eddb8
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-firewire
@@ -0,0 +1,136 @@
+What: /sys/bus/firewire/devices/fw[0-9]+/
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ IEEE 1394 node device attributes.
+ Read-only. Mutable during the node device's lifetime.
+ See IEEE 1212 for semantic definitions.
+
+ config_rom
+ Contents of the Configuration ROM register.
+ Binary attribute; an array of host-endian u32.
+
+ guid
+ The node's EUI-64 in the bus information block of
+ Configuration ROM.
+ Hexadecimal string representation of an u64.
+
+
+What: /sys/bus/firewire/devices/fw[0-9]+/units
+Date: June 2009
+KernelVersion: 2.6.31
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ IEEE 1394 node device attribute.
+ Read-only. Mutable during the node device's lifetime.
+ See IEEE 1212 for semantic definitions.
+
+ units
+ Summary of all units present in an IEEE 1394 node.
+ Contains space-separated tuples of specifier_id and
+ version of each unit present in the node. Specifier_id
+ and version are hexadecimal string representations of
+ u24 of the respective unit directory entries.
+ Specifier_id and version within each tuple are separated
+ by a colon.
+
+Users: udev rules to set ownership and access permissions or ACLs of
+ /dev/fw[0-9]+ character device files
+
+
+What: /sys/bus/firewire/devices/fw[0-9]+/is_local
+Date: July 2012
+KernelVersion: 3.6
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ IEEE 1394 node device attribute.
+ Read-only and immutable.
+Values: 1: The sysfs entry represents a local node (a controller card).
+
+ 0: The sysfs entry represents a remote node.
+
+
+What: /sys/bus/firewire/devices/fw[0-9]+[.][0-9]+/
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ IEEE 1394 unit device attributes.
+ Read-only. Immutable during the unit device's lifetime.
+ See IEEE 1212 for semantic definitions.
+
+ modalias
+ Same as MODALIAS in the uevent at device creation.
+
+ rom_index
+ Offset of the unit directory within the parent device's
+ (node device's) Configuration ROM, in quadlets.
+ Decimal string representation.
+
+
+What: /sys/bus/firewire/devices/*/
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ Attributes common to IEEE 1394 node devices and unit devices.
+ Read-only. Mutable during the node device's lifetime.
+ Immutable during the unit device's lifetime.
+ See IEEE 1212 for semantic definitions.
+
+ These attributes are only created if the root directory of an
+ IEEE 1394 node or the unit directory of an IEEE 1394 unit
+ actually contains according entries.
+
+ hardware_version
+ Hexadecimal string representation of an u24.
+
+ hardware_version_name
+ Contents of a respective textual descriptor leaf.
+
+ model
+ Hexadecimal string representation of an u24.
+
+ model_name
+ Contents of a respective textual descriptor leaf.
+
+ specifier_id
+ Hexadecimal string representation of an u24.
+ Mandatory in unit directories according to IEEE 1212.
+
+ vendor
+ Hexadecimal string representation of an u24.
+ Mandatory in the root directory according to IEEE 1212.
+
+ vendor_name
+ Contents of a respective textual descriptor leaf.
+
+ version
+ Hexadecimal string representation of an u24.
+ Mandatory in unit directories according to IEEE 1212.
+
+
+What: /sys/bus/firewire/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+ formerly
+ /sys/bus/ieee1394/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+Date: Feb 2004
+KernelVersion: 2.6.4
+Contact: linux1394-devel@lists.sourceforge.net
+Description:
+ SCSI target port identifier and logical unit identifier of a
+ logical unit of an SBP-2 target. The identifiers are specified
+ in SAM-2...SAM-4 annex A. They are persistent and world-wide
+ unique properties the SBP-2 attached target.
+
+ Read-only attribute, immutable during the target's lifetime.
+ Format, as exposed by firewire-sbp2 since 2.6.22, May 2007:
+ Colon-separated hexadecimal string representations of
+
+ u64 EUI-64 : u24 directory_ID : u16 LUN
+
+ without 0x prefixes, without whitespace. The former sbp2 driver
+ (removed in 2.6.37 after being superseded by firewire-sbp2) used
+ a somewhat shorter format which was not as close to SAM.
+
+Users: udev rules to create /dev/disk/by-id/ symlinks
diff --git a/Documentation/ABI/stable/sysfs-bus-fsl-mc b/Documentation/ABI/stable/sysfs-bus-fsl-mc
new file mode 100644
index 000000000..58f06c7ee
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-fsl-mc
@@ -0,0 +1,19 @@
+What: /sys/bus/fsl-mc/rescan
+Date: January 2021
+KernelVersion: 5.12
+Contact: Ioana Ciornei <ioana.ciornei@nxp.com>
+Description: Writing a non-zero value to this attribute will
+ force a rescan of fsl-mc bus in the system and
+ synchronize the objects under fsl-mc bus and the
+ Management Complex firmware.
+Users: Userspace drivers and management tools
+
+What: /sys/bus/fsl-mc/autorescan
+Date: January 2021
+KernelVersion: 5.12
+Contact: Ioana Ciornei <ioana.ciornei@nxp.com>
+Description: Writing a zero value to this attribute will
+ disable the DPRC IRQs on which automatic rescan
+ of the fsl-mc bus is performed. A non-zero value
+ will enable the DPRC IRQs.
+Users: Userspace drivers and management tools
diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi
new file mode 100644
index 000000000..96ccc3385
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-mhi
@@ -0,0 +1,31 @@
+What: /sys/bus/mhi/devices/.../serialnumber
+Date: Sept 2020
+KernelVersion: 5.10
+Contact: Bhaumik Bhatt <bbhatt@codeaurora.org>
+Description: The file holds the serial number of the client device obtained
+ using a BHI (Boot Host Interface) register read after at least
+ one attempt to power up the device has been done. If read
+ without having the device power on at least once, the file will
+ read all 0's.
+Users: Any userspace application or clients interested in device info.
+
+What: /sys/bus/mhi/devices/.../oem_pk_hash
+Date: Sept 2020
+KernelVersion: 5.10
+Contact: Bhaumik Bhatt <bbhatt@codeaurora.org>
+Description: The file holds the OEM PK Hash value of the endpoint device
+ obtained using a BHI (Boot Host Interface) register read after
+ at least one attempt to power up the device has been done. If
+ read without having the device power on at least once, the file
+ will read all 0's.
+Users: Any userspace application or clients interested in device info.
+
+What: /sys/bus/mhi/devices/.../soc_reset
+Date: April 2022
+KernelVersion: 5.19
+Contact: mhi@lists.linux.dev
+Description: Initiates a SoC reset on the MHI controller. A SoC reset is
+ a reset of last resort, and will require a complete re-init.
+ This can be useful as a method of recovery if the device is
+ non-responsive, or as a means of loading new firmware as a
+ system administration task.
diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem b/Documentation/ABI/stable/sysfs-bus-nvmem
new file mode 100644
index 000000000..c399323f3
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-nvmem
@@ -0,0 +1,22 @@
+What: /sys/bus/nvmem/devices/.../nvmem
+Date: July 2015
+KernelVersion: 4.2
+Contact: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+Description:
+ This file allows user to read/write the raw NVMEM contents.
+ Permissions for write to this file depends on the nvmem
+ provider configuration.
+ Note: This file is only present if CONFIG_NVMEM_SYSFS
+ is enabled
+
+ ex::
+
+ hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ *
+ 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+ 0000000 0000 0000 0000 0000 0000 0000 0000 0000
+ ...
+ *
+ 0001000
diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb
new file mode 100644
index 000000000..cad4bc232
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-usb
@@ -0,0 +1,142 @@
+What: /sys/bus/usb/devices/.../power/persist
+Date: May 2007
+KernelVersion: 2.6.23
+Contact: Alan Stern <stern@rowland.harvard.edu>
+Description:
+ USB device directories can contain a file named power/persist.
+ The file holds a boolean value (0 or 1) indicating whether or
+ not the "USB-Persist" facility is enabled for the device. For
+ hubs this facility is always enabled and their device
+ directories will not contain this file.
+
+ For more information, see Documentation/driver-api/usb/persist.rst.
+
+What: /sys/bus/usb/devices/.../power/autosuspend
+Date: March 2007
+KernelVersion: 2.6.21
+Contact: Alan Stern <stern@rowland.harvard.edu>
+Description:
+ Each USB device directory will contain a file named
+ power/autosuspend. This file holds the time (in seconds)
+ the device must be idle before it will be autosuspended.
+ 0 means the device will be autosuspended as soon as
+ possible. Negative values will prevent the device from
+ being autosuspended at all, and writing a negative value
+ will resume the device if it is already suspended.
+
+ The autosuspend delay for newly-created devices is set to
+ the value of the usbcore.autosuspend module parameter.
+
+What: /sys/bus/usb/device/.../power/connected_duration
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+ If CONFIG_PM is enabled, then this file is present. When read,
+ it returns the total time (in msec) that the USB device has been
+ connected to the machine. This file is read-only.
+Users:
+ PowerTOP <powertop@lists.01.org>
+ https://01.org/powertop/
+
+What: /sys/bus/usb/device/.../power/active_duration
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+ If CONFIG_PM is enabled, then this file is present. When read,
+ it returns the total time (in msec) that the USB device has been
+ active, i.e. not in a suspended state. This file is read-only.
+
+ Tools can use this file and the connected_duration file to
+ compute the percentage of time that a device has been active.
+ For example::
+
+ echo $((100 * `cat active_duration` / `cat connected_duration`))
+
+ will give an integer percentage. Note that this does not
+ account for counter wrap.
+Users:
+ PowerTOP <powertop@lists.01.org>
+ https://01.org/powertop/
+
+What: /sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
+Date: January 2008
+KernelVersion: 2.6.27
+Contact: Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+ When read, this file returns 1 if the interface driver
+ for this interface supports autosuspend. It also
+ returns 1 if no driver has claimed this interface, as an
+ unclaimed interface will not stop the device from being
+ autosuspended if all other interface drivers are idle.
+ The file returns 0 if autosuspend support has not been
+ added to the driver.
+Users:
+ USB PM tool
+ git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What: /sys/bus/usb/device/.../avoid_reset_quirk
+Date: December 2009
+Contact: Oliver Neukum <oliver@neukum.org>
+Description:
+ Writing 1 to this file tells the kernel that this
+ device will morph into another mode when it is reset.
+ Drivers will not use reset for error handling for
+ such devices.
+Users:
+ usb_modeswitch
+
+What: /sys/bus/usb/devices/.../devnum
+KernelVersion: since at least 2.6.18
+Description:
+ Device address on the USB bus.
+Users:
+ libusb
+
+What: /sys/bus/usb/devices/.../bConfigurationValue
+KernelVersion: since at least 2.6.18
+Description:
+ bConfigurationValue of the *active* configuration for the
+ device. Writing 0 or -1 to bConfigurationValue will reset the
+ active configuration (unconfigure the device). Writing
+ another value will change the active configuration.
+
+ Note that some devices, in violation of the USB spec, have a
+ configuration with a value equal to 0. Writing 0 to
+ bConfigurationValue for these devices will install that
+ configuration, rather then unconfigure the device.
+
+ Writing -1 will always unconfigure the device.
+Users:
+ libusb
+
+What: /sys/bus/usb/devices/.../busnum
+KernelVersion: 2.6.22
+Description:
+ Bus-number of the USB-bus the device is connected to.
+Users:
+ libusb
+
+What: /sys/bus/usb/devices/.../descriptors
+KernelVersion: 2.6.26
+Description:
+ Binary file containing cached descriptors of the device. The
+ binary data consists of the device descriptor followed by the
+ descriptors for each configuration of the device.
+ Note that the wTotalLength of the config descriptors can not
+ be trusted, as the device may have a smaller config descriptor
+ than it advertises. The bLength field of each (sub) descriptor
+ can be trusted, and can be used to seek forward one (sub)
+ descriptor at a time until the next config descriptor is found.
+ All descriptors read from this file are in bus-endian format
+Users:
+ libusb
+
+What: /sys/bus/usb/devices/.../speed
+KernelVersion: since at least 2.6.18
+Description:
+ Speed the device is connected with to the usb-host in
+ Mbit / second. IE one of 1.5 / 12 / 480 / 5000.
+Users:
+ libusb
diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus
new file mode 100644
index 000000000..3066feae1
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -0,0 +1,187 @@
+What: /sys/bus/vmbus/hibernation
+Date: Jan 2021
+KernelVersion: 5.12
+Contact: Dexuan Cui <decui@microsoft.com>
+Description: Whether the host supports hibernation for the VM.
+Users: Daemon that sets up swap partition/file for hibernation.
+
+What: /sys/bus/vmbus/devices/<UUID>/id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus child_relid of the device's primary channel
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/<UUID>/class_id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus interface type GUID of the device
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/<UUID>/device_id
+Date: Jul 2009
+KernelVersion: 2.6.31
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The VMBus interface instance GUID of the device
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/<UUID>/channel_vp_mapping
+Date: Jul 2015
+KernelVersion: 4.2.0
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The mapping of which primary/sub channels are bound to which
+ Virtual Processors.
+ Format: <channel's child_relid:the bound cpu's number>
+Users: tools/hv/lsvmbus
+
+What: /sys/bus/vmbus/devices/<UUID>/device
+Date: Dec. 2015
+KernelVersion: 4.5
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The 16 bit device ID of the device
+Users: tools/hv/lsvmbus and user level RDMA libraries
+
+What: /sys/bus/vmbus/devices/<UUID>/vendor
+Date: Dec. 2015
+KernelVersion: 4.5
+Contact: K. Y. Srinivasan <kys@microsoft.com>
+Description: The 16 bit vendor ID of the device
+Users: tools/hv/lsvmbus and user level RDMA libraries
+
+What: /sys/bus/vmbus/devices/<UUID>/numa_node
+Date: Jul 2018
+KernelVersion: 4.19
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: This NUMA node to which the VMBUS device is
+ attached, or -1 if the node is unknown.
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Directory for per-channel information
+ NN is the VMBUS relid associated with the channel.
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: VCPU (sub)channel is affinitized to
+Users: tools/hv/lsvmbus and other debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/in_mask
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Host to guest channel interrupt mask
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/latency
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Channel signaling latency. This file is available only for
+ performance critical channels (storage, network, etc.) that use
+ the monitor page mechanism.
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_mask
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Guest to host channel interrupt mask
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/pending
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Channel interrupt pending state. This file is available only for
+ performance critical channels (storage, network, etc.) that use
+ the monitor page mechanism.
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/read_avail
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Bytes available to read
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/write_avail
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Bytes available to write
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/events
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Number of times we have signaled the host
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/interrupts
+Date: September. 2017
+KernelVersion: 4.14
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Number of times we have taken an interrupt (incoming)
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/subchannel_id
+Date: January. 2018
+KernelVersion: 4.16
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Subchannel ID associated with VMBUS channel
+Users: Debugging tools and userspace drivers
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/monitor_id
+Date: January. 2018
+KernelVersion: 4.16
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Monitor bit associated with channel. This file is available only
+ for performance critical channels (storage, network, etc.) that
+ use the monitor page mechanism.
+Users: Debugging tools and userspace drivers
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/ring
+Date: January. 2018
+KernelVersion: 4.16
+Contact: Stephen Hemminger <sthemmin@microsoft.com>
+Description: Binary file created by uio_hv_generic for ring buffer
+Users: Userspace drivers
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_in_full
+Date: February 2019
+KernelVersion: 5.0
+Contact: Michael Kelley <mikelley@microsoft.com>
+Description: Number of guest to host interrupts caused by the inbound ring
+ buffer transitioning from full to not full while a packet is
+ waiting for buffer space to become available
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_out_empty
+Date: February 2019
+KernelVersion: 5.0
+Contact: Michael Kelley <mikelley@microsoft.com>
+Description: Number of guest to host interrupts caused by the outbound ring
+ buffer transitioning from empty to not empty
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_first
+Date: February 2019
+KernelVersion: 5.0
+Contact: Michael Kelley <mikelley@microsoft.com>
+Description: Number of write operations that were the first to encounter an
+ outbound ring buffer full condition
+Users: Debugging tools
+
+What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_total
+Date: February 2019
+KernelVersion: 5.0
+Contact: Michael Kelley <mikelley@microsoft.com>
+Description: Total number of write operations that encountered an outbound
+ ring buffer full condition
+Users: Debugging tools
diff --git a/Documentation/ABI/stable/sysfs-bus-w1 b/Documentation/ABI/stable/sysfs-bus-w1
new file mode 100644
index 000000000..5cd5e872b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-w1
@@ -0,0 +1,12 @@
+What: /sys/bus/w1/devices/.../w1_master_timeout_us
+Date: April 2015
+Contact: Dmitry Khromov <dk@icelogic.net>
+Description: Bus scanning interval, microseconds component.
+ Some of 1-Wire devices commonly associated with physical access
+ control systems are attached/generate presence for as short as
+ 100 ms - hence the tens-to-hundreds milliseconds scan intervals
+ are required.
+
+ see Documentation/w1/w1-generic.rst for detailed information.
+Users: any user space application which wants to know bus scanning
+ interval
diff --git a/Documentation/ABI/stable/sysfs-bus-xen-backend b/Documentation/ABI/stable/sysfs-bus-xen-backend
new file mode 100644
index 000000000..480a89edf
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-xen-backend
@@ -0,0 +1,84 @@
+What: /sys/bus/xen-backend/devices/*/devtype
+Date: Feb 2009
+KernelVersion: 2.6.38
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The type of the device. e.g., one of: 'vbd' (block),
+ 'vif' (network), or 'vfb' (framebuffer).
+
+What: /sys/bus/xen-backend/devices/*/nodename
+Date: Feb 2009
+KernelVersion: 2.6.38
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ XenStore node (under /local/domain/NNN/) for this
+ backend device.
+
+What: /sys/bus/xen-backend/devices/vbd-*/physical_device
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The major:minor number (in hexadecimal) of the
+ physical device providing the storage for this backend
+ block device.
+
+What: /sys/bus/xen-backend/devices/vbd-*/mode
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Whether the block device is read-only ('r') or
+ read-write ('w').
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/f_req
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of flush requests from the frontend.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/oo_req
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of requests delayed because the backend was too
+ busy processing previous requests.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/rd_req
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of read requests from the frontend.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/rd_sect
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of sectors read by the frontend.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/wr_req
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of write requests from the frontend.
+
+What: /sys/bus/xen-backend/devices/vbd-*/statistics/wr_sect
+Date: April 2011
+KernelVersion: 3.0
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Number of sectors written by the frontend.
+
+What: /sys/bus/xen-backend/devices/*/state
+Date: August 2018
+KernelVersion: 4.19
+Contact: Joe Jin <joe.jin@oracle.com>
+Description:
+ The state of the device. One of: 'Unknown',
+ 'Initialising', 'Initialised', 'Connected', 'Closing',
+ 'Closed', 'Reconfiguring', 'Reconfigured'.
diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight
new file mode 100644
index 000000000..023fb5264
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-backlight
@@ -0,0 +1,57 @@
+What: /sys/class/backlight/<backlight>/bl_power
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+
+ - FB_BLANK_UNBLANK (0) : power on.
+ - FB_BLANK_POWERDOWN (4) : power off
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/brightness
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Control the brightness for this <backlight>. Values
+ are between 0 and max_brightness. This file will also
+ show the brightness level stored in the driver, which
+ may not be the actual brightness (see actual_brightness).
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/actual_brightness
+Date: March 2006
+KernelVersion: 2.6.17
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Show the actual brightness by querying the hardware.
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/max_brightness
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: Richard Purdie <rpurdie@rpsys.net>
+Description:
+ Maximum brightness for <backlight>.
+Users: HAL
+
+What: /sys/class/backlight/<backlight>/type
+Date: September 2010
+KernelVersion: 2.6.37
+Contact: Matthew Garrett <mjg@redhat.com>
+Description:
+ The type of interface controlled by <backlight>.
+ "firmware": The driver uses a standard firmware interface
+ "platform": The driver uses a platform-specific interface
+ "raw": The driver controls hardware registers directly
+
+ In the general case, when multiple backlight
+ interfaces are available for a single device, firmware
+ control should be preferred to platform control should
+ be preferred to raw control. Using a firmware
+ interface reduces the probability of confusion with
+ the hardware and the OS independently updating the
+ backlight state. Platform interfaces are mostly a
+ holdover from pre-standardisation of firmware
+ interfaces.
diff --git a/Documentation/ABI/stable/sysfs-class-infiniband b/Documentation/ABI/stable/sysfs-class-infiniband
new file mode 100644
index 000000000..ebf08c604
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-infiniband
@@ -0,0 +1,784 @@
+sysfs interface common for all infiniband devices
+-------------------------------------------------
+
+What: /sys/class/infiniband/<device>/node_type
+What: /sys/class/infiniband/<device>/node_guid
+What: /sys/class/infiniband/<device>/sys_image_guid
+Date: Apr, 2005
+KernelVersion: v2.6.12
+Contact: linux-rdma@vger.kernel.org
+Description:
+ =============== ===========================================
+ node_type: (RO) Node type (CA, RNIC, usNIC, usNIC UDP,
+ switch or router)
+
+ node_guid: (RO) Node GUID
+
+ sys_image_guid: (RO) System image GUID
+ =============== ===========================================
+
+
+What: /sys/class/infiniband/<device>/node_desc
+Date: Feb, 2006
+KernelVersion: v2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description:
+ (RW) Update the node description with information such as the
+ node's hostname, so that IB network management software can tie
+ its view to the real world.
+
+
+What: /sys/class/infiniband/<device>/fw_ver
+Date: Jun, 2016
+KernelVersion: v4.10
+Contact: linux-rdma@vger.kernel.org
+Description:
+ (RO) Display firmware version
+
+
+What: /sys/class/infiniband/<device>/ports/<port-num>/lid
+What: /sys/class/infiniband/<device>/ports/<port-num>/rate
+What: /sys/class/infiniband/<device>/ports/<port-num>/lid_mask_count
+What: /sys/class/infiniband/<device>/ports/<port-num>/sm_sl
+What: /sys/class/infiniband/<device>/ports/<port-num>/sm_lid
+What: /sys/class/infiniband/<device>/ports/<port-num>/state
+What: /sys/class/infiniband/<device>/ports/<port-num>/phys_state
+What: /sys/class/infiniband/<device>/ports/<port-num>/cap_mask
+Date: Apr, 2005
+KernelVersion: v2.6.12
+Contact: linux-rdma@vger.kernel.org
+Description:
+
+ =============== ===============================================
+ lid: (RO) Port LID
+
+ rate: (RO) Port data rate (active width * active
+ speed)
+
+ lid_mask_count: (RO) Port LID mask count
+
+ sm_sl: (RO) Subnet manager SL for port's subnet
+
+ sm_lid: (RO) Subnet manager LID for port's subnet
+
+ state: (RO) Port state (DOWN, INIT, ARMED, ACTIVE or
+ ACTIVE_DEFER)
+
+ phys_state: (RO) Port physical state (Sleep, Polling,
+ LinkUp, etc)
+
+ cap_mask: (RO) Port capability mask. 2 bits here are
+ settable- IsCommunicationManagementSupported
+ (set when CM module is loaded) and IsSM (set
+ via open of issmN file).
+ =============== ===============================================
+
+
+What: /sys/class/infiniband/<device>/ports/<port-num>/link_layer
+Date: Oct, 2010
+KernelVersion: v2.6.37
+Contact: linux-rdma@vger.kernel.org
+Description:
+ (RO) Link layer type information (Infiniband or Ethernet type)
+
+
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/symbol_error
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_errors
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_remote_physical_errors
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_switch_relay_errors
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/link_error_recovery
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_constraint_errors
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_contraint_errors
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/local_link_integrity_errors
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/excessive_buffer_overrun_errors
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_data
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_data
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_packets
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_packets
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/unicast_rcv_packets
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/unicast_xmit_packets
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/multicast_rcv_packets
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/multicast_xmit_packets
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/link_downed
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_discards
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/VL15_dropped
+What: /sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_wait
+Date: Apr, 2005
+KernelVersion: v2.6.12
+Contact: linux-rdma@vger.kernel.org
+Description:
+ **Errors info**:
+
+ symbol_error: (RO) Total number of minor link errors detected on
+ one or more physical lanes.
+
+ port_rcv_errors : (RO) Total number of packets containing an
+ error that were received on the port.
+
+ port_rcv_remote_physical_errors : (RO) Total number of packets
+ marked with the EBP delimiter received on the port.
+
+ port_rcv_switch_relay_errors : (RO) Total number of packets
+ received on the port that were discarded because they could not
+ be forwarded by the switch relay.
+
+ link_error_recovery: (RO) Total number of times the Port
+ Training state machine has successfully completed the link error
+ recovery process.
+
+ port_xmit_constraint_errors: (RO) Total number of packets not
+ transmitted from the switch physical port due to outbound raw
+ filtering or failing outbound partition or IP version check.
+
+ port_rcv_constraint_errors: (RO) Total number of packets
+ received on the switch physical port that are discarded due to
+ inbound raw filtering or failing inbound partition or IP version
+ check.
+
+ local_link_integrity_errors: (RO) The number of times that the
+ count of local physical errors exceeded the threshold specified
+ by LocalPhyErrors
+
+ excessive_buffer_overrun_errors: (RO) This counter, indicates an
+ input buffer overrun. It indicates possible misconfiguration of
+ a port, either by the Subnet Manager (SM) or by user
+ intervention. It can also indicate hardware issues or extremely
+ poor link signal integrity
+
+ **Data info**:
+
+ port_xmit_data: (RO) Total number of data octets, divided by 4
+ (lanes), transmitted on all VLs. This is 64 bit counter
+
+ port_rcv_data: (RO) Total number of data octets, divided by 4
+ (lanes), received on all VLs. This is 64 bit counter.
+
+ port_xmit_packets: (RO) Total number of packets transmitted on
+ all VLs from this port. This may include packets with errors.
+ This is 64 bit counter.
+
+ port_rcv_packets: (RO) Total number of packets (this may include
+ packets containing Errors. This is 64 bit counter.
+
+ link_downed: (RO) Total number of times the Port Training state
+ machine has failed the link error recovery process and downed
+ the link.
+
+ unicast_rcv_packets: (RO) Total number of unicast packets,
+ including unicast packets containing errors.
+
+ unicast_xmit_packets: (RO) Total number of unicast packets
+ transmitted on all VLs from the port. This may include unicast
+ packets with errors.
+
+ multicast_rcv_packets: (RO) Total number of multicast packets,
+ including multicast packets containing errors.
+
+ multicast_xmit_packets: (RO) Total number of multicast packets
+ transmitted on all VLs from the port. This may include multicast
+ packets with errors.
+
+ **Misc info**:
+
+ port_xmit_discards: (RO) Total number of outbound packets
+ discarded by the port because the port is down or congested.
+
+ VL15_dropped: (RO) Number of incoming VL15 packets dropped due
+ to resource limitations (e.g., lack of buffers) of the port.
+
+ port_xmit_wait: (RO) The number of ticks during which the port
+ had data to transmit but no data was sent during the entire tick
+ (either because of insufficient credits or because of lack of
+ arbitration).
+
+ Each of these files contains the corresponding value from the
+ port's Performance Management PortCounters attribute, as
+ described in the InfiniBand Architecture Specification.
+
+
+What: /sys/class/infiniband/<device-name>/hw_counters/lifespan
+What: /sys/class/infiniband/<device-name>/ports/<port-num>/hw_counters/lifespan
+Date: May, 2016
+KernelVersion: 4.6
+Contact: linux-rdma@vger.kernel.org
+Description:
+ The optional "hw_counters" subdirectory can be under either the
+ parent device or the port subdirectories or both. If present,
+ there are a list of counters provided by the hardware. They may
+ match some of the counters in the counters directory, but they
+ often include many other counters. In addition to the various
+ counters, there will be a file named "lifespan" that configures
+ how frequently the core should update the counters when they are
+ being accessed (counters are not updated if they are not being
+ accessed). The lifespan is in milliseconds and defaults to 10
+ unless set to something else by the driver. Users may echo a
+ value between 0-10000 to the lifespan file to set the length
+ of time between updates in milliseconds.
+
+
+What: /sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/ndevs/<gid-index>
+Date: November 29, 2015
+KernelVersion: 4.4.0
+Contact: linux-rdma@vger.kernel.org
+Description: The net-device's name associated with the GID resides
+ at index <gid-index>.
+
+What: /sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/types/<gid-index>
+Date: November 29, 2015
+KernelVersion: 4.4.0
+Contact: linux-rdma@vger.kernel.org
+Description: The RoCE type of the associated GID resides at index <gid-index>.
+ This could either be "IB/RoCE v1" for IB and RoCE v1 based GIDs
+ or "RoCE v2" for RoCE v2 based GIDs.
+
+
+What: /sys/class/infiniband_mad/umad<N>/ibdev
+What: /sys/class/infiniband_mad/umad<N>/port
+What: /sys/class/infiniband_mad/issm<N>/ibdev
+What: /sys/class/infiniband_mad/issm<N>/port
+Date: Apr, 2005
+KernelVersion: v2.6.12
+Contact: linux-rdma@vger.kernel.org
+Description:
+ Each port of each InfiniBand device has a "umad" device and an
+ "issm" device attached. For example, a two-port HCA will have
+ two umad devices and two issm devices, while a switch will have
+ one device of each type (for switch port 0).
+
+ ======= =====================================
+ ibdev: (RO) Show Infiniband (IB) device name
+
+ port: (RO) Display port number
+ ======= =====================================
+
+
+What: /sys/class/infiniband_mad/abi_version
+Date: Apr, 2005
+KernelVersion: v2.6.12
+Contact: linux-rdma@vger.kernel.org
+Description:
+ (RO) Value is incremented if any changes are made that break
+ userspace ABI compatibility of umad & issm devices.
+
+
+What: /sys/class/infiniband_verbs/uverbs<N>/ibdev
+What: /sys/class/infiniband_verbs/uverbs<N>/abi_version
+Date: Sept, 2005
+KernelVersion: v2.6.14
+Contact: linux-rdma@vger.kernel.org
+Description:
+ =============== ===========================================
+ ibdev: (RO) Display Infiniband (IB) device name
+
+ abi_version: (RO) Show ABI version of IB device specific
+ interfaces.
+ =============== ===========================================
+
+
+What: /sys/class/infiniband_verbs/abi_version
+Date: Sep, 2005
+KernelVersion: v2.6.14
+Contact: linux-rdma@vger.kernel.org
+Description:
+ (RO) Value is incremented if any changes are made that break
+ userspace ABI compatibility of uverbs devices.
+
+
+sysfs interface for Mellanox IB HCA low-level driver (mthca)
+------------------------------------------------------------
+
+What: /sys/class/infiniband/mthcaX/hw_rev
+What: /sys/class/infiniband/mthcaX/hca_type
+What: /sys/class/infiniband/mthcaX/board_id
+Date: Apr, 2005
+KernelVersion: v2.6.12
+Contact: linux-rdma@vger.kernel.org
+Description:
+ =============== ================================================
+ hw_rev: (RO) Hardware revision number
+
+ hca_type: (RO) Host Channel Adapter type: MT23108, MT25208
+ (MT23108 compat mode), MT25208 or MT25204
+
+ board_id: (RO) Manufacturing board ID
+ =============== ================================================
+
+
+sysfs interface for Mellanox ConnectX HCA IB driver (mlx4)
+----------------------------------------------------------
+
+What: /sys/class/infiniband/mlx4_X/hw_rev
+What: /sys/class/infiniband/mlx4_X/hca_type
+What: /sys/class/infiniband/mlx4_X/board_id
+Date: Sep, 2007
+KernelVersion: v2.6.24
+Contact: linux-rdma@vger.kernel.org
+Description:
+ =============== ===============================
+ hw_rev: (RO) Hardware revision number
+
+ hca_type: (RO) Host channel adapter type
+
+ board_id: (RO) Manufacturing board ID
+ =============== ===============================
+
+
+What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/gids/<n>
+What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/admin_guids/<n>
+What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/pkeys/<n>
+What: /sys/class/infiniband/mlx4_X/iov/ports/<port-num>/mcgs/
+What: /sys/class/infiniband/mlx4_X/iov/ports/<pci-slot-num>/ports/<m>/gid_idx/0
+What: /sys/class/infiniband/mlx4_X/iov/ports/<pci-slot-num>/ports/<m>/pkey_idx/<n>
+Date: Aug, 2012
+KernelVersion: v3.6.15
+Contact: linux-rdma@vger.kernel.org
+Description:
+ The sysfs iov directory is used to manage and examine the port
+ P_Key and guid paravirtualization. This directory is added only
+ for the master -- slaves do not have it.
+
+ Under iov/ports, the administrator may examine the gid and P_Key
+ tables as they are present in the device (and as are seen in the
+ "network view" presented to the SM).
+
+ The "pkeys" and "gids" subdirectories contain one file for each
+ entry in the port's P_Key or GID table respectively. For
+ example, ports/1/pkeys/10 contains the value at index 10 in port
+ 1's P_Key table.
+
+ ======================= ==========================================
+ gids/<n>: (RO) The physical port gids n = 0..127
+
+ admin_guids/<n>: (RW) Allows examining or changing the
+ administrative state of a given GUID
+ n = 0..127
+
+ pkeys/<n>: (RO) Displays the contents of the physical
+ key table n = 0..126
+
+ mcgs/: (RO) Muticast group table
+
+ <m>/gid_idx/0: (RO) Display the GID mapping m = 1..2
+
+ <m>/pkey_idx/<n>: (RW) Writable except for RoCE pkeys.
+ m = 1..2, n = 0..126
+
+ Under the iov/<pci slot number>
+ directories, the admin may map the index
+ numbers in the physical tables (as under
+ iov/ports) to the paravirtualized index
+ numbers that guests see.
+
+ For example, if the administrator, for
+ port 1 on guest 2 maps physical pkey
+ index 10 to virtual index 1, then that
+ guest, whenever it uses its pkey index
+ 1, will actually be using the real pkey
+ index 10.
+ ======================= ==========================================
+
+
+What: /sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/smi_enabled
+What: /sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/enable_smi_admin
+Date: May, 2014
+KernelVersion: v3.15.7
+Contact: linux-rdma@vger.kernel.org
+Description:
+ Enabling QP0 on VFs for selected VF/port. By default, no VFs are
+ enabled for QP0 operation.
+
+ ================= ==== ===========================================
+ smi_enabled: (RO) Indicates whether smi is currently enabled
+ for the indicated VF/port
+
+ enable_smi_admin: (RW) Used by the admin to request that smi
+ capability be enabled or disabled for the
+ indicated VF/port. 0 = disable, 1 = enable.
+ ================= ==== ===========================================
+
+ The requested enablement will occur at the next reset of the VF
+ (e.g. driver restart on the VM which owns the VF).
+
+
+sysfs interface for Chelsio T4/T5 RDMA driver (cxgb4)
+-----------------------------------------------------
+
+What: /sys/class/infiniband/cxgb4_X/hw_rev
+What: /sys/class/infiniband/cxgb4_X/hca_type
+What: /sys/class/infiniband/cxgb4_X/board_id
+Date: Apr, 2010
+KernelVersion: v2.6.35
+Contact: linux-rdma@vger.kernel.org
+Description:
+
+ =============== =============================================
+ hw_rev: (RO) Hardware revision number
+
+ hca_type: (RO) Driver short name. Should normally match
+ the name in its bus driver structure (e.g.
+ pci_driver::name)
+
+ board_id: (RO) Manufacturing board id. (Vendor + device
+ information)
+ =============== =============================================
+
+
+sysfs interface for Intel IB driver qib
+---------------------------------------
+
+What: /sys/class/infiniband/qibX/version
+What: /sys/class/infiniband/qibX/hw_rev
+What: /sys/class/infiniband/qibX/hca_type
+What: /sys/class/infiniband/qibX/board_id
+What: /sys/class/infiniband/qibX/boardversion
+What: /sys/class/infiniband/qibX/nctxts
+What: /sys/class/infiniband/qibX/localbus_info
+What: /sys/class/infiniband/qibX/tempsense
+What: /sys/class/infiniband/qibX/serial
+What: /sys/class/infiniband/qibX/nfreectxts
+What: /sys/class/infiniband/qibX/chip_reset
+Date: May, 2010
+KernelVersion: v2.6.35
+Contact: linux-rdma@vger.kernel.org
+Description:
+ =============== ======================================================
+ version: (RO) Display version information of installed software
+ and drivers.
+
+ hw_rev: (RO) Hardware revision number
+
+ hca_type: (RO) Host channel adapter type
+
+ board_id: (RO) Manufacturing board id
+
+ boardversion: (RO) Current version of the chip architecture
+
+ nctxts: (RO) Return the number of user ports (contexts)
+ available
+
+ localbus_info: (RO) Human readable localbus info
+
+ tempsense: (RO) Display temp sense registers in decimal
+
+ serial: (RO) Serial number of the HCA
+
+ nfreectxts: (RO) The number of free user ports (contexts)
+ available.
+
+ chip_reset: (WO) Reset the chip if possible by writing
+ "reset" to this file. Only allowed if no user
+ contexts are open that use chip resources.
+ =============== ======================================================
+
+
+What: /sys/class/infiniband/qibX/ports/<N>/sl2vl/[0-15]
+Date: May, 2010
+KernelVersion: v2.6.35
+Contact: linux-rdma@vger.kernel.org
+Description:
+ (RO) The directory contains 16 files numbered 0-15 that specify
+ the Service Level (SL). Listing the SL files returns the Virtual
+ Lane (VL) as programmed by the SL.
+
+What: /sys/class/infiniband/qibX/ports/<N>/CCMgtA/cc_settings_bin
+What: /sys/class/infiniband/qibX/ports/<N>/CCMgtA/cc_table_bin
+Date: May, 2010
+KernelVersion: v2.6.35
+Contact: linux-rdma@vger.kernel.org
+Description:
+ Per-port congestion control. Both are binary attributes.
+
+ =============== ================================================
+ cc_table_bin (RO) Congestion control table size followed by
+ table entries.
+
+ cc_settings_bin (RO) Congestion settings: port control, control
+ map and an array of 16 entries for the
+ congestion entries - increase, timer, event log
+ trigger threshold and the minimum injection rate
+ delay.
+ =============== ================================================
+
+What: /sys/class/infiniband/qibX/ports/<N>/linkstate/loopback
+What: /sys/class/infiniband/qibX/ports/<N>/linkstate/led_override
+What: /sys/class/infiniband/qibX/ports/<N>/linkstate/hrtbt_enable
+What: /sys/class/infiniband/qibX/ports/<N>/linkstate/status
+What: /sys/class/infiniband/qibX/ports/<N>/linkstate/status_str
+Date: May, 2010
+KernelVersion: v2.6.35
+Contact: linux-rdma@vger.kernel.org
+Description:
+ [to be documented]
+
+ =============== ===============================================
+ loopback: (WO)
+ led_override: (WO)
+ hrtbt_enable: (RW)
+ status: (RO)
+
+ status_str: (RO) Displays information about the link state,
+ possible cable/switch problems, and hardware
+ errors. Possible states are- "Initted",
+ "Present", "IB_link_up", "IB_configured" or
+ "Fatal_Hardware_Error".
+ =============== ===============================================
+
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/rc_resends
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/seq_naks
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/rdma_seq
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/rnr_naks
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/other_naks
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/rc_timeouts
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/look_pkts
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/pkt_drops
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/dma_wait
+What: /sys/class/infiniband/qibX/ports/<N>/diag_counters/unaligned
+Date: May, 2010
+KernelVersion: v2.6.35
+Contact: linux-rdma@vger.kernel.org
+Description:
+ [to be documented]
+
+
+sysfs interface for Mellanox Connect-IB HCA driver mlx5
+-------------------------------------------------------
+
+What: /sys/class/infiniband/mlx5_X/hw_rev
+What: /sys/class/infiniband/mlx5_X/hca_type
+What: /sys/class/infiniband/mlx5_X/reg_pages
+What: /sys/class/infiniband/mlx5_X/fw_pages
+Date: Jul, 2013
+KernelVersion: v3.11
+Contact: linux-rdma@vger.kernel.org
+Description:
+ [to be documented]
+
+
+sysfs interface for Cisco VIC (usNIC) Verbs Driver
+--------------------------------------------------
+
+What: /sys/class/infiniband/usnic_X/board_id
+What: /sys/class/infiniband/usnic_X/config
+What: /sys/class/infiniband/usnic_X/qp_per_vf
+What: /sys/class/infiniband/usnic_X/max_vf
+What: /sys/class/infiniband/usnic_X/cq_per_vf
+What: /sys/class/infiniband/usnic_X/iface
+Date: Sep, 2013
+KernelVersion: v3.14
+Contact: Christian Benvenuti <benve@cisco.com>,
+ Dave Goodell <dgoodell@cisco.com>,
+ linux-rdma@vger.kernel.org
+Description:
+
+ =============== ===============================================
+ board_id: (RO) Manufacturing board id
+
+ config: (RO) Report the configuration for this PF
+
+ qp_per_vf: (RO) Queue pairs per virtual function.
+
+ max_vf: (RO) Max virtual functions
+
+ cq_per_vf: (RO) Completion queue per virtual function
+
+ iface: (RO) Shows which network interface this usNIC
+ entry is associated to (visible with ifconfig).
+ =============== ===============================================
+
+What: /sys/class/infiniband/usnic_X/qpn/summary
+What: /sys/class/infiniband/usnic_X/qpn/context
+Date: Sep, 2013
+KernelVersion: v3.14
+Contact: Christian Benvenuti <benve@cisco.com>,
+ Dave Goodell <dgoodell@cisco.com>,
+ linux-rdma@vger.kernel.org
+Description:
+ [to be documented]
+
+
+sysfs interface for Emulex RoCE HCA Driver
+------------------------------------------
+
+What: /sys/class/infiniband/ocrdmaX/hw_rev
+Date: Feb, 2014
+KernelVersion: v3.14
+Description:
+ hw_rev: (RO) Hardware revision number
+
+What: /sys/class/infiniband/ocrdmaX/hca_type
+Date: Jun, 2014
+KernelVersion: v3.16
+Contact: linux-rdma@vger.kernel.org
+Description:
+ hca_type: (RO) Display FW version
+
+
+sysfs interface for Intel Omni-Path driver (HFI1)
+-------------------------------------------------
+
+What: /sys/class/infiniband/hfi1_X/hw_rev
+What: /sys/class/infiniband/hfi1_X/board_id
+What: /sys/class/infiniband/hfi1_X/nctxts
+What: /sys/class/infiniband/hfi1_X/serial
+What: /sys/class/infiniband/hfi1_X/chip_reset
+What: /sys/class/infiniband/hfi1_X/boardversion
+What: /sys/class/infiniband/hfi1_X/nfreectxts
+What: /sys/class/infiniband/hfi1_X/tempsense
+Date: May, 2016
+KernelVersion: v4.6
+Contact: linux-rdma@vger.kernel.org
+Description:
+ =============== =============================================
+ hw_rev: (RO) Hardware revision number
+
+ board_id: (RO) Manufacturing board id
+
+ nctxts: (RO) Total contexts available.
+
+ serial: (RO) Board serial number
+
+ chip_reset: (WO) Write "reset" to this file to reset the
+ chip if possible. Only allowed if no user
+ contexts are open that use chip resources.
+
+ boardversion: (RO) Human readable board info
+
+ nfreectxts: (RO) The number of free user ports (contexts)
+ available.
+
+ tempsense: (RO) Thermal sense information
+ =============== =============================================
+
+
+What: /sys/class/infiniband/hfi1_X/ports/<N>/CCMgtA/cc_settings_bin
+What: /sys/class/infiniband/hfi1_X/ports/<N>/CCMgtA/cc_table_bin
+What: /sys/class/infiniband/hfi1_X/ports/<N>/CCMgtA/cc_prescan
+Date: May, 2016
+KernelVersion: v4.6
+Contact: linux-rdma@vger.kernel.org
+Description:
+ Per-port congestion control.
+
+ =============== ================================================
+ cc_table_bin (RO) CCA tables used by PSM2 Congestion control
+ table size followed by table entries. Binary
+ attribute.
+
+ cc_settings_bin (RO) Congestion settings: port control, control
+ map and an array of 16 entries for the
+ congestion entries - increase, timer, event log
+ trigger threshold and the minimum injection rate
+ delay. Binary attribute.
+
+ cc_prescan (RW) enable prescanning for faster BECN
+ response. Write "on" to enable and "off" to
+ disable.
+ =============== ================================================
+
+What: /sys/class/infiniband/hfi1_X/ports/<N>/sc2vl/[0-31]
+What: /sys/class/infiniband/hfi1_X/ports/<N>/sl2sc/[0-31]
+What: /sys/class/infiniband/hfi1_X/ports/<N>/vl2mtu/[0-15]
+Date: May, 2016
+KernelVersion: v4.6
+Contact: linux-rdma@vger.kernel.org
+Description:
+ =============== ===================================================
+ sc2vl/: (RO) 32 files (0 - 31) used to translate sl->vl
+
+ sl2sc/: (RO) 32 files (0 - 31) used to translate sl->sc
+
+ vl2mtu/: (RO) 16 files (0 - 15) used to determine MTU for vl
+ =============== ===================================================
+
+
+What: /sys/class/infiniband/hfi1_X/sdma_<N>/cpu_list
+What: /sys/class/infiniband/hfi1_X/sdma_<N>/vl
+Date: Sept, 2016
+KernelVersion: v4.8
+Contact: linux-rdma@vger.kernel.org
+Description:
+ sdma<N>/ contains one directory per sdma engine (0 - 15)
+
+ =============== ==============================================
+ cpu_list: (RW) List of cpus for user-process to sdma
+ engine assignment.
+
+ vl: (RO) Displays the virtual lane (vl) the sdma
+ engine maps to.
+ =============== ==============================================
+
+ This interface gives the user control on the affinity settings
+ for the device. As an example, to set an sdma engine irq
+ affinity and thread affinity of a user processes to use the
+ sdma engine, which is "near" in terms of NUMA configuration, or
+ physical cpu location, the user will do::
+
+ echo "3" > /proc/irq/<N>/smp_affinity_list
+ echo "4-7" > /sys/devices/.../sdma3/cpu_list
+ cat /sys/devices/.../sdma3/vl
+ 0
+ echo "8" > /proc/irq/<M>/smp_affinity_list
+ echo "9-12" > /sys/devices/.../sdma4/cpu_list
+ cat /sys/devices/.../sdma4/vl
+ 1
+
+ to make sure that when a process runs on cpus 4,5,6, or 7, and
+ uses vl=0, then sdma engine 3 is selected by the driver, and
+ also the interrupt of the sdma engine 3 is steered to cpu 3.
+ Similarly, when a process runs on cpus 9,10,11, or 12 and sets
+ vl=1, then engine 4 will be selected and the irq of the sdma
+ engine 4 is steered to cpu 8. This assumes that in the above N
+ is the irq number of "sdma3", and M is irq number of "sdma4" in
+ the /proc/interrupts file.
+
+sysfs interface for QLogic qedr NIC Driver
+------------------------------------------
+
+What: /sys/class/infiniband/qedrX/hw_rev
+What: /sys/class/infiniband/qedrX/hca_type
+Date: Oct, 2016
+KernelVersion: v4.10
+Contact: linux-rdma@vger.kernel.org
+Description:
+
+ =============== ==== ========================
+ hw_rev: (RO) Hardware revision number
+
+ hca_type: (RO) Display HCA type
+ =============== ==== ========================
+
+
+sysfs interface for VMware Paravirtual RDMA driver
+--------------------------------------------------
+
+What: /sys/class/infiniband/vmw_pvrdmaX/hw_rev
+What: /sys/class/infiniband/vmw_pvrdmaX/hca_type
+What: /sys/class/infiniband/vmw_pvrdmaX/board_id
+Date: Oct, 2016
+KernelVersion: v4.10
+Contact: linux-rdma@vger.kernel.org
+Description:
+
+ =============== ==== =====================================
+ hw_rev: (RO) Hardware revision number
+
+ hca_type: (RO) Host channel adapter type
+
+ board_id: (RO) Display PVRDMA manufacturing board ID
+ =============== ==== =====================================
+
+
+sysfs interface for Broadcom NetXtreme-E RoCE driver
+----------------------------------------------------
+
+What: /sys/class/infiniband/bnxt_reX/hw_rev
+What: /sys/class/infiniband/bnxt_reX/hca_type
+Date: Feb, 2017
+KernelVersion: v4.11
+Contact: linux-rdma@vger.kernel.org
+Description:
+ =============== ==== =========================
+ hw_rev: (RO) Hardware revision number
+
+ hca_type: (RO) Host channel adapter type
+ =============== ==== =========================
diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill
new file mode 100644
index 000000000..037979f7d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-rfkill
@@ -0,0 +1,93 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/driver-api/rfkill.rst.
+
+For the deprecated ``/sys/class/rfkill/*/claim`` knobs of this interface look in
+Documentation/ABI/removed/sysfs-class-rfkill.
+
+What: /sys/class/rfkill
+Date: 09-Jul-2007
+KernelVersion: v2.6.22
+Contact: linux-wireless@vger.kernel.org,
+Description: The rfkill class subsystem folder.
+ Each registered rfkill driver is represented by an rfkillX
+ subfolder (X being an integer >= 0).
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/name
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Name assigned by driver to this key (interface or driver name).
+Values: arbitrary string.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/type
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Driver type string ("wlan", "bluetooth", etc).
+Values: See include/linux/rfkill.h.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/persistent
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Whether the soft blocked state is initialised from non-volatile
+ storage at startup.
+Values: A numeric value:
+
+ - 0: false
+ - 1: true
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/state
+Date: 09-Jul-2007
+KernelVersion v2.6.22
+Contact: linux-wireless@vger.kernel.org
+Description: Current state of the transmitter.
+ This file was scheduled to be removed in 2014, but due to its
+ large number of users it will be sticking around for a bit
+ longer. Despite it being marked as stable, the newer "hard" and
+ "soft" interfaces should be preferred, since it is not possible
+ to express the 'soft and hard block' state of the rfkill driver
+ through this interface. There will likely be another attempt to
+ remove it in the future.
+Values: A numeric value.
+
+ 0: RFKILL_STATE_SOFT_BLOCKED
+ transmitter is turned off by software
+ 1: RFKILL_STATE_UNBLOCKED
+ transmitter is (potentially) active
+ 2: RFKILL_STATE_HARD_BLOCKED
+ transmitter is forced off by something outside of
+ the driver's control.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/hard
+Date: 12-March-2010
+KernelVersion v2.6.34
+Contact: linux-wireless@vger.kernel.org
+Description: Current hardblock state. This file is read only.
+Values: A numeric value.
+
+ 0: inactive
+ The transmitter is (potentially) active.
+ 1: active
+ The transmitter is forced off by something outside of
+ the driver's control.
+
+
+What: /sys/class/rfkill/rfkill[0-9]+/soft
+Date: 12-March-2010
+KernelVersion v2.6.34
+Contact: linux-wireless@vger.kernel.org
+Description: Current softblock state. This file is read and write.
+Values: A numeric value.
+
+ 0: inactive
+ The transmitter is (potentially) active.
+
+ 1: active
+ The transmitter is turned off by software.
diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm
new file mode 100644
index 000000000..411d5895b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-tpm
@@ -0,0 +1,210 @@
+What: /sys/class/tpm/tpmX/device/
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: linux-integrity@vger.kernel.org
+Description: The device/ directory under a specific TPM instance exposes
+ the properties of that TPM chip
+
+
+What: /sys/class/tpm/tpmX/device/active
+Date: April 2006
+KernelVersion: 2.6.17
+Contact: linux-integrity@vger.kernel.org
+Description: The "active" property prints a '1' if the TPM chip is accepting
+ commands. An inactive TPM chip still contains all the state of
+ an active chip (Storage Root Key, NVRAM, etc), and can be
+ visible to the OS, but will only accept a restricted set of
+ commands. See the TPM Main Specification part 2, Structures,
+ section 17 for more information on which commands are
+ available.
+
+What: /sys/class/tpm/tpmX/device/cancel
+Date: June 2005
+KernelVersion: 2.6.13
+Contact: linux-integrity@vger.kernel.org
+Description: The "cancel" property allows you to cancel the currently
+ pending TPM command. Writing any value to cancel will call the
+ TPM vendor specific cancel operation.
+
+What: /sys/class/tpm/tpmX/device/caps
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: linux-integrity@vger.kernel.org
+Description: The "caps" property contains TPM manufacturer and version info.
+
+ Example output::
+
+ Manufacturer: 0x53544d20
+ TCG version: 1.2
+ Firmware version: 8.16
+
+ Manufacturer is a hex dump of the 4 byte manufacturer info
+ space in a TPM. TCG version shows the TCG TPM spec level that
+ the chip supports. Firmware version is that of the chip and
+ is manufacturer specific.
+
+What: /sys/class/tpm/tpmX/device/durations
+Date: March 2011
+KernelVersion: 3.1
+Contact: linux-integrity@vger.kernel.org
+Description: The "durations" property shows the 3 vendor-specific values
+ used to wait for a short, medium and long TPM command. All
+ TPM commands are categorized as short, medium or long in
+ execution time, so that the driver doesn't have to wait
+ any longer than necessary before starting to poll for a
+ result.
+
+ Example output::
+
+ 3015000 4508000 180995000 [original]
+
+ Here the short, medium and long durations are displayed in
+ usecs. "[original]" indicates that the values are displayed
+ unmodified from when they were queried from the chip.
+ Durations can be modified in the case where a buggy chip
+ reports them in msec instead of usec and they need to be
+ scaled to be displayed in usecs. In this case "[adjusted]"
+ will be displayed in place of "[original]".
+
+What: /sys/class/tpm/tpmX/device/enabled
+Date: April 2006
+KernelVersion: 2.6.17
+Contact: linux-integrity@vger.kernel.org
+Description: The "enabled" property prints a '1' if the TPM chip is enabled,
+ meaning that it should be visible to the OS. This property
+ may be visible but produce a '0' after some operation that
+ disables the TPM.
+
+What: /sys/class/tpm/tpmX/device/owned
+Date: April 2006
+KernelVersion: 2.6.17
+Contact: linux-integrity@vger.kernel.org
+Description: The "owned" property produces a '1' if the TPM_TakeOwnership
+ ordinal has been executed successfully in the chip. A '0'
+ indicates that ownership hasn't been taken.
+
+What: /sys/class/tpm/tpmX/device/pcrs
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: linux-integrity@vger.kernel.org
+Description: The "pcrs" property will dump the current value of all Platform
+ Configuration Registers in the TPM. Note that since these
+ values may be constantly changing, the output is only valid
+ for a snapshot in time.
+
+ Example output::
+
+ PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+ ...
+
+ The number of PCRs and hex bytes needed to represent a PCR
+ value will vary depending on TPM chip version. For TPM 1.1 and
+ 1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
+ long. Use the "caps" property to determine TPM version.
+
+What: /sys/class/tpm/tpmX/device/pubek
+Date: April 2005
+KernelVersion: 2.6.12
+Contact: linux-integrity@vger.kernel.org
+Description: The "pubek" property will return the TPM's public endorsement
+ key if possible. If the TPM has had ownership established and
+ is version 1.2, the pubek will not be available without the
+ owner's authorization. Since the TPM driver doesn't store any
+ secrets, it can't authorize its own request for the pubek,
+ making it unaccessible. The public endorsement key is gener-
+ ated at TPM manufacture time and exists for the life of the
+ chip.
+
+ Example output::
+
+ Algorithm: 00 00 00 01
+ Encscheme: 00 03
+ Sigscheme: 00 01
+ Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+ Modulus length: 256
+ Modulus:
+ B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+ 3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+ 1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+ 86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+ D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+ 82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+ 0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+ 1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+ 6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+ A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+ 47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+ 10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+ E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+ F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+ F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+ C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+
+ Possible values::
+
+ Algorithm: TPM_ALG_RSA (1)
+ Encscheme: TPM_ES_RSAESPKCSv15 (2)
+ TPM_ES_RSAESOAEP_SHA1_MGF1 (3)
+ Sigscheme: TPM_SS_NONE (1)
+ Parameters, a byte string of 3 u32 values:
+ Key Length (bits): 00 00 08 00 (2048)
+ Num primes: 00 00 00 02 (2)
+ Exponent Size: 00 00 00 00 (0 means the
+ default exp)
+ Modulus Length: 256 (bytes)
+ Modulus: The 256 byte Endorsement Key modulus
+
+What: /sys/class/tpm/tpmX/device/temp_deactivated
+Date: April 2006
+KernelVersion: 2.6.17
+Contact: linux-integrity@vger.kernel.org
+Description: The "temp_deactivated" property returns a '1' if the chip has
+ been temporarily deactivated, usually until the next power
+ cycle. Whether a warm boot (reboot) will clear a TPM chip
+ from a temp_deactivated state is platform specific.
+
+What: /sys/class/tpm/tpmX/device/timeouts
+Date: March 2011
+KernelVersion: 3.1
+Contact: linux-integrity@vger.kernel.org
+Description: The "timeouts" property shows the 4 vendor-specific values
+ for the TPM's interface spec timeouts. The use of these
+ timeouts is defined by the TPM interface spec that the chip
+ conforms to.
+
+ Example output::
+
+ 750000 750000 750000 750000 [original]
+
+ The four timeout values are shown in usecs, with a trailing
+ "[original]" or "[adjusted]" depending on whether the values
+ were scaled by the driver to be reported in usec from msecs.
+
+What: /sys/class/tpm/tpmX/tpm_version_major
+Date: October 2019
+KernelVersion: 5.5
+Contact: linux-integrity@vger.kernel.org
+Description: The "tpm_version_major" property shows the TCG spec major version
+ implemented by the TPM device.
+
+ Example output::
+
+ 2
+
+What: /sys/class/tpm/tpmX/pcr-<H>/<N>
+Date: March 2021
+KernelVersion: 5.12
+Contact: linux-integrity@vger.kernel.org
+Description: produces output in compact hex representation for PCR
+ number N from hash bank H. N is the numeric value of
+ the PCR number and H is the crypto string
+ representation of the hash
+
+ Example output::
+
+ cat /sys/class/tpm/tpm0/pcr-sha256/7
+ 2ED93F199692DC6788EFA6A1FE74514AB9760B2A6CEEAEF6C808C13E4ABB0D42
diff --git a/Documentation/ABI/stable/sysfs-class-ubi b/Documentation/ABI/stable/sysfs-class-ubi
new file mode 100644
index 000000000..a6b324014
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-ubi
@@ -0,0 +1,221 @@
+What: /sys/class/ubi/
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ The ubi/ class sub-directory belongs to the UBI subsystem and
+ provides general UBI information, per-UBI device information
+ and per-UBI volume information.
+
+What: /sys/class/ubi/version
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ This file contains version of the latest supported UBI on-media
+ format. Currently it is 1, and there is no plan to change this.
+ However, if in the future UBI needs on-flash format changes
+ which cannot be done in a compatible manner, a new format
+ version will be added. So this is a mechanism for possible
+ future backward-compatible (but forward-incompatible)
+ improvements.
+
+What: /sys/class/ubiX/
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ The /sys/class/ubi0, /sys/class/ubi1, etc directories describe
+ UBI devices (UBI device 0, 1, etc). They contain general UBI
+ device information and per UBI volume information (each UBI
+ device may have many UBI volumes)
+
+What: /sys/class/ubi/ubiX/avail_eraseblocks
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Amount of available logical eraseblock. For example, one may
+ create a new UBI volume which has this amount of logical
+ eraseblocks.
+
+What: /sys/class/ubi/ubiX/bad_peb_count
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Count of bad physical eraseblocks on the underlying MTD device.
+
+What: /sys/class/ubi/ubiX/bgt_enabled
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Contains ASCII "0\n" if the UBI background thread is disabled,
+ and ASCII "1\n" if it is enabled.
+
+What: /sys/class/ubi/ubiX/dev
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Major and minor numbers of the character device corresponding
+ to this UBI device (in <major>:<minor> format).
+
+What: /sys/class/ubi/ubiX/eraseblock_size
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Maximum logical eraseblock size this UBI device may provide. UBI
+ volumes may have smaller logical eraseblock size because of their
+ alignment.
+
+What: /sys/class/ubi/ubiX/max_ec
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Maximum physical eraseblock erase counter value.
+
+What: /sys/class/ubi/ubiX/max_vol_count
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Maximum number of volumes which this UBI device may have.
+
+What: /sys/class/ubi/ubiX/min_io_size
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Minimum input/output unit size. All the I/O may only be done
+ in fractions of the contained number.
+
+What: /sys/class/ubi/ubiX/mtd_num
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Number of the underlying MTD device.
+
+What: /sys/class/ubi/ubiX/reserved_for_bad
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Number of physical eraseblocks reserved for bad block handling.
+
+What: /sys/class/ubi/ubiX/ro_mode
+Date: April 2016
+KernelVersion: 4.7
+Contact: linux-mtd@lists.infradead.org
+Description:
+ Contains ASCII "1\n" if the read-only flag is set on this
+ device, and "0\n" if it is cleared. UBI devices mark themselves
+ as read-only when they detect an unrecoverable error.
+
+What: /sys/class/ubi/ubiX/total_eraseblocks
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Total number of good (not marked as bad) physical eraseblocks on
+ the underlying MTD device.
+
+What: /sys/class/ubi/ubiX/volumes_count
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Count of volumes on this UBI device.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ The /sys/class/ubi/ubiX/ubiX_0/, /sys/class/ubi/ubiX/ubiX_1/,
+ etc directories describe UBI volumes on UBI device X (volumes
+ 0, 1, etc).
+
+What: /sys/class/ubi/ubiX/ubiX_Y/alignment
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Volume alignment - the value the logical eraseblock size of
+ this volume has to be aligned on. For example, 2048 means that
+ logical eraseblock size is multiple of 2048. In other words,
+ volume logical eraseblock size is UBI device logical eraseblock
+ size aligned to the alignment value.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/corrupted
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Contains ASCII "0\n" if the UBI volume is OK, and ASCII "1\n"
+ if it is corrupted (e.g., due to an interrupted volume update).
+
+What: /sys/class/ubi/ubiX/ubiX_Y/data_bytes
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ The amount of data this volume contains. This value makes sense
+ only for static volumes, and for dynamic volume it equivalent
+ to the total volume size in bytes.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/dev
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Major and minor numbers of the character device corresponding
+ to this UBI volume (in <major>:<minor> format).
+
+What: /sys/class/ubi/ubiX/ubiX_Y/name
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Volume name.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/reserved_ebs
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Count of physical eraseblock reserved for this volume.
+ Equivalent to the volume size in logical eraseblocks.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/type
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Volume type. Contains ASCII "dynamic\n" for dynamic volumes and
+ "static\n" for static volumes.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/upd_marker
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Contains ASCII "0\n" if the update marker is not set for this
+ volume, and "1\n" if it is set. The update marker is set when
+ volume update starts, and cleaned when it ends. So the presence
+ of the update marker indicates that the volume is being updated
+ at the moment of the update was interrupted. The later may be
+ checked using the "corrupted" sysfs file.
+
+What: /sys/class/ubi/ubiX/ubiX_Y/usable_eb_size
+Date: July 2006
+KernelVersion: 2.6.22
+Contact: Artem Bityutskiy <dedekind@infradead.org>
+Description:
+ Logical eraseblock size of this volume. Equivalent to logical
+ eraseblock size of the device aligned on the volume alignment
+ value.
diff --git a/Documentation/ABI/stable/sysfs-class-udc b/Documentation/ABI/stable/sysfs-class-udc
new file mode 100644
index 000000000..d1e2f3ec1
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-udc
@@ -0,0 +1,93 @@
+What: /sys/class/udc/<udc>/a_alt_hnp_support
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates if an OTG A-Host supports HNP at an alternate port.
+Users:
+
+What: /sys/class/udc/<udc>/a_hnp_support
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates if an OTG A-Host supports HNP at this port.
+Users:
+
+What: /sys/class/udc/<udc>/b_hnp_enable
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates if an OTG A-Host enabled HNP support.
+Users:
+
+What: /sys/class/udc/<udc>/current_speed
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates the current negotiated speed at this port.
+Users:
+
+What: /sys/class/udc/<udc>/is_a_peripheral
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates that this port is the default Host on an OTG session
+ but HNP was used to switch roles.
+Users:
+
+What: /sys/class/udc/<udc>/is_otg
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates that this port support OTG.
+Users:
+
+What: /sys/class/udc/<udc>/maximum_speed
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates the maximum USB speed supported by this port.
+Users:
+
+What: /sys/class/udc/<udc>/soft_connect
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Allows users to disconnect data pullup resistors thus causing a
+ logical disconnection from the USB Host.
+Users:
+
+What: /sys/class/udc/<udc>/srp
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Allows users to manually start Session Request Protocol.
+Users:
+
+What: /sys/class/udc/<udc>/state
+Date: June 2011
+KernelVersion: 3.1
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Indicates current state of the USB Device Controller. Valid
+ states are: 'not-attached', 'attached', 'powered',
+ 'reconnecting', 'unauthenticated', 'default', 'addressed',
+ 'configured', and 'suspended'; however not all USB Device
+ Controllers support reporting all states.
+Users:
+
+What: /sys/class/udc/<udc>/function
+Date: June 2017
+KernelVersion: 4.13
+Contact: Felipe Balbi <balbi@kernel.org>
+Description:
+ Prints out name of currently running USB Gadget Driver.
+Users:
diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices
new file mode 100644
index 000000000..98a8ef99a
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices
@@ -0,0 +1,32 @@
+Note:
+ This documents additional properties of any device beyond what
+ is documented in Documentation/admin-guide/sysfs-rules.rst
+
+What: /sys/devices/*/of_node
+Date: February 2015
+Contact: Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+ Any device associated with a device-tree node will have
+ an of_path symlink pointing to the corresponding device
+ node in /sys/firmware/devicetree/
+
+What: /sys/devices/*/devspec
+Date: October 2016
+Contact: Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+ If CONFIG_OF is enabled, then this file is present. When
+ read, it returns full name of the device node.
+
+What: /sys/devices/*/obppath
+Date: October 2016
+Contact: Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+ If CONFIG_OF is enabled, then this file is present. When
+ read, it returns full name of the device node.
+
+What: /sys/devices/*/dev
+Date: Jun 2006
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+ Major and minor numbers of the character device corresponding
+ to the device (in <major>:<minor> format).
diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
new file mode 100644
index 000000000..8db67aa47
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -0,0 +1,184 @@
+What: /sys/devices/system/node/possible
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that could be possibly become online at some point.
+
+What: /sys/devices/system/node/online
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that are online.
+
+What: /sys/devices/system/node/has_normal_memory
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that have regular memory.
+
+What: /sys/devices/system/node/has_cpu
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that have one or more CPUs.
+
+What: /sys/devices/system/node/has_high_memory
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Nodes that have regular or high memory.
+ Depends on CONFIG_HIGHMEM.
+
+What: /sys/devices/system/node/nodeX
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ When CONFIG_NUMA is enabled, this is a directory containing
+ information on node X such as what CPUs are local to the
+ node. Each file is detailed next.
+
+What: /sys/devices/system/node/nodeX/cpumap
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ The node's cpumap.
+
+What: /sys/devices/system/node/nodeX/cpulist
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ The CPUs associated to the node.
+
+What: /sys/devices/system/node/nodeX/meminfo
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Provides information about the node's distribution and memory
+ utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.rst
+
+What: /sys/devices/system/node/nodeX/numastat
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ The node's hit/miss statistics, in units of pages.
+ See Documentation/admin-guide/numastat.rst
+
+What: /sys/devices/system/node/nodeX/distance
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ Distance between the node and all the other nodes
+ in the system.
+
+What: /sys/devices/system/node/nodeX/vmstat
+Date: October 2002
+Contact: Linux Memory Management list <linux-mm@kvack.org>
+Description:
+ The node's zoned virtual memory statistics.
+ This is a superset of numastat.
+
+What: /sys/devices/system/node/nodeX/compact
+Date: February 2010
+Contact: Mel Gorman <mel@csn.ul.ie>
+Description:
+ When this file is written to, all memory within that node
+ will be compacted. When it completes, memory will be freed
+ into blocks which have as many contiguous pages as possible
+
+What: /sys/devices/system/node/nodeX/hugepages/hugepages-<size>/
+Date: December 2009
+Contact: Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+ The node's huge page size control/query attributes.
+ See Documentation/admin-guide/mm/hugetlbpage.rst
+
+What: /sys/devices/system/node/nodeX/accessY/
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ The node's relationship to other nodes for access class "Y".
+
+What: /sys/devices/system/node/nodeX/accessY/initiators/
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ The directory containing symlinks to memory initiator
+ nodes that have class "Y" access to this target node's
+ memory. CPUs and other memory initiators in nodes not in
+ the list accessing this node's memory may have different
+ performance.
+
+What: /sys/devices/system/node/nodeX/accessY/targets/
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ The directory containing symlinks to memory targets that
+ this initiator node has class "Y" access.
+
+What: /sys/devices/system/node/nodeX/accessY/initiators/read_bandwidth
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ This node's read bandwidth in MB/s when accessed from
+ nodes found in this access class's linked initiators.
+
+What: /sys/devices/system/node/nodeX/accessY/initiators/read_latency
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ This node's read latency in nanoseconds when accessed
+ from nodes found in this access class's linked initiators.
+
+What: /sys/devices/system/node/nodeX/accessY/initiators/write_bandwidth
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ This node's write bandwidth in MB/s when accessed from
+ found in this access class's linked initiators.
+
+What: /sys/devices/system/node/nodeX/accessY/initiators/write_latency
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ This node's write latency in nanoseconds when access
+ from nodes found in this class's linked initiators.
+
+What: /sys/devices/system/node/nodeX/memory_side_cache/indexY/
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ The directory containing attributes for the memory-side cache
+ level 'Y'.
+
+What: /sys/devices/system/node/nodeX/memory_side_cache/indexY/indexing
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ The caches associativity indexing: 0 for direct mapped,
+ non-zero if indexed.
+
+What: /sys/devices/system/node/nodeX/memory_side_cache/indexY/line_size
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ The number of bytes accessed from the next cache level on a
+ cache miss.
+
+What: /sys/devices/system/node/nodeX/memory_side_cache/indexY/size
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ The size of this memory side cache in bytes.
+
+What: /sys/devices/system/node/nodeX/memory_side_cache/indexY/write_policy
+Date: December 2018
+Contact: Keith Busch <keith.busch@intel.com>
+Description:
+ The cache write policy: 0 for write-back, 1 for write-through,
+ other or unknown.
+
+What: /sys/devices/system/node/nodeX/x86/sgx_total_bytes
+Date: November 2021
+Contact: Jarkko Sakkinen <jarkko@kernel.org>
+Description:
+ The total amount of SGX physical memory in bytes.
diff --git a/Documentation/ABI/stable/sysfs-devices-system-cpu b/Documentation/ABI/stable/sysfs-devices-system-cpu
new file mode 100644
index 000000000..902392d7e
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-system-cpu
@@ -0,0 +1,127 @@
+What: /sys/devices/system/cpu/dscr_default
+Date: 13-May-2014
+KernelVersion: v3.15.0
+Contact:
+Description: Writes are equivalent to writing to
+ /sys/devices/system/cpu/cpuN/dscr on all CPUs.
+ Reads return the last written value or 0.
+ This value is not a global default: it is a way to set
+ all per-CPU defaults at the same time.
+Values: 64 bit unsigned integer (bit field)
+
+What: /sys/devices/system/cpu/cpu[0-9]+/dscr
+Date: 13-May-2014
+KernelVersion: v3.15.0
+Contact:
+Description: Default value for the Data Stream Control Register (DSCR) on
+ a CPU.
+ This default value is used when the kernel is executing and
+ for any process that has not set the DSCR itself.
+ If a process ever sets the DSCR (via direct access to the
+ SPR) that value will be persisted for that process and used
+ on any CPU where it executes (overriding the value described
+ here).
+ If set by a process it will be inherited by child processes.
+Values: 64 bit unsigned integer (bit field)
+
+What: /sys/devices/system/cpu/cpuX/topology/physical_package_id
+Description: physical package id of cpuX. Typically corresponds to a physical
+ socket number, but the actual value is architecture and platform
+ dependent.
+Values: integer
+
+What: /sys/devices/system/cpu/cpuX/topology/die_id
+Description: the CPU die ID of cpuX. Typically it is the hardware platform's
+ identifier (rather than the kernel's). The actual value is
+ architecture and platform dependent.
+Values: integer
+
+What: /sys/devices/system/cpu/cpuX/topology/core_id
+Description: the CPU core ID of cpuX. Typically it is the hardware platform's
+ identifier (rather than the kernel's). The actual value is
+ architecture and platform dependent.
+Values: integer
+
+What: /sys/devices/system/cpu/cpuX/topology/cluster_id
+Description: the cluster ID of cpuX. Typically it is the hardware platform's
+ identifier (rather than the kernel's). The actual value is
+ architecture and platform dependent.
+Values: integer
+
+What: /sys/devices/system/cpu/cpuX/topology/book_id
+Description: the book ID of cpuX. Typically it is the hardware platform's
+ identifier (rather than the kernel's). The actual value is
+ architecture and platform dependent. it's only used on s390.
+Values: integer
+
+What: /sys/devices/system/cpu/cpuX/topology/drawer_id
+Description: the drawer ID of cpuX. Typically it is the hardware platform's
+ identifier (rather than the kernel's). The actual value is
+ architecture and platform dependent. it's only used on s390.
+Values: integer
+
+What: /sys/devices/system/cpu/cpuX/topology/core_cpus
+Description: internal kernel map of CPUs within the same core.
+ (deprecated name: "thread_siblings")
+Values: hexadecimal bitmask.
+
+What: /sys/devices/system/cpu/cpuX/topology/core_cpus_list
+Description: human-readable list of CPUs within the same core.
+ The format is like 0-3, 8-11, 14,17.
+ (deprecated name: "thread_siblings_list").
+Values: decimal list.
+
+What: /sys/devices/system/cpu/cpuX/topology/package_cpus
+Description: internal kernel map of the CPUs sharing the same physical_package_id.
+ (deprecated name: "core_siblings").
+Values: hexadecimal bitmask.
+
+What: /sys/devices/system/cpu/cpuX/topology/package_cpus_list
+Description: human-readable list of CPUs sharing the same physical_package_id.
+ The format is like 0-3, 8-11, 14,17.
+ (deprecated name: "core_siblings_list")
+Values: decimal list.
+
+What: /sys/devices/system/cpu/cpuX/topology/die_cpus
+Description: internal kernel map of CPUs within the same die.
+Values: hexadecimal bitmask.
+
+What: /sys/devices/system/cpu/cpuX/topology/ppin
+Description: per-socket protected processor inventory number
+Values: hexadecimal.
+
+What: /sys/devices/system/cpu/cpuX/topology/die_cpus_list
+Description: human-readable list of CPUs within the same die.
+ The format is like 0-3, 8-11, 14,17.
+Values: decimal list.
+
+What: /sys/devices/system/cpu/cpuX/topology/cluster_cpus
+Description: internal kernel map of CPUs within the same cluster.
+Values: hexadecimal bitmask.
+
+What: /sys/devices/system/cpu/cpuX/topology/cluster_cpus_list
+Description: human-readable list of CPUs within the same cluster.
+ The format is like 0-3, 8-11, 14,17.
+Values: decimal list.
+
+What: /sys/devices/system/cpu/cpuX/topology/book_siblings
+Description: internal kernel map of cpuX's hardware threads within the same
+ book_id. it's only used on s390.
+Values: hexadecimal bitmask.
+
+What: /sys/devices/system/cpu/cpuX/topology/book_siblings_list
+Description: human-readable list of cpuX's hardware threads within the same
+ book_id.
+ The format is like 0-3, 8-11, 14,17. it's only used on s390.
+Values: decimal list.
+
+What: /sys/devices/system/cpu/cpuX/topology/drawer_siblings
+Description: internal kernel map of cpuX's hardware threads within the same
+ drawer_id. it's only used on s390.
+Values: hexadecimal bitmask.
+
+What: /sys/devices/system/cpu/cpuX/topology/drawer_siblings_list
+Description: human-readable list of cpuX's hardware threads within the same
+ drawer_id.
+ The format is like 0-3, 8-11, 14,17. it's only used on s390.
+Values: decimal list.
diff --git a/Documentation/ABI/stable/sysfs-devices-system-xen_memory b/Documentation/ABI/stable/sysfs-devices-system-xen_memory
new file mode 100644
index 000000000..6d83f95a8
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-system-xen_memory
@@ -0,0 +1,86 @@
+What: /sys/devices/system/xen_memory/xen_memory0/max_retry_count
+Date: May 2011
+KernelVersion: 2.6.39
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The maximum number of times the balloon driver will
+ attempt to increase the balloon before giving up. See
+ also 'retry_count' below.
+ A value of zero means retry forever and is the default one.
+
+What: /sys/devices/system/xen_memory/xen_memory0/max_schedule_delay
+Date: May 2011
+KernelVersion: 2.6.39
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The limit that 'schedule_delay' (see below) will be
+ increased to. The default value is 32 seconds.
+
+What: /sys/devices/system/xen_memory/xen_memory0/retry_count
+Date: May 2011
+KernelVersion: 2.6.39
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The current number of times that the balloon driver
+ has attempted to increase the size of the balloon.
+ The default value is one. With max_retry_count being
+ zero (unlimited), this means that the driver will attempt
+ to retry with a 'schedule_delay' delay.
+
+What: /sys/devices/system/xen_memory/xen_memory0/schedule_delay
+Date: May 2011
+KernelVersion: 2.6.39
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The time (in seconds) to wait between attempts to
+ increase the balloon. Each time the balloon cannot be
+ increased, 'schedule_delay' is increased (until
+ 'max_schedule_delay' is reached at which point it
+ will use the max value).
+
+What: /sys/devices/system/xen_memory/xen_memory0/target
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ The target number of pages to adjust this domain's
+ memory reservation to.
+
+What: /sys/devices/system/xen_memory/xen_memory0/target_kb
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ As target above, except the value is in KiB.
+
+What: /sys/devices/system/xen_memory/xen_memory0/info/current_kb
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Current size (in KiB) of this domain's memory
+ reservation.
+
+What: /sys/devices/system/xen_memory/xen_memory0/info/high_kb
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Amount (in KiB) of high memory in the balloon.
+
+What: /sys/devices/system/xen_memory/xen_memory0/info/low_kb
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+ Amount (in KiB) of low (or normal) memory in the
+ balloon.
+
+What: /sys/devices/system/xen_memory/xen_memory0/scrub_pages
+Date: September 2018
+KernelVersion: 4.20
+Contact: xen-devel@lists.xenproject.org
+Description:
+ Control scrubbing pages before returning them to Xen for others domains
+ use. Can be set with xen_scrub_pages cmdline
+ parameter. Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
diff --git a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
new file mode 100644
index 000000000..950cafc94
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
@@ -0,0 +1,24 @@
+What: /sys/bus/platform/drivers/aspeed-vuart/*/lpc_address
+Date: April 2017
+Contact: Jeremy Kerr <jk@ozlabs.org>
+Description: Configures which IO port the host side of the UART
+ will appear on the host <-> BMC LPC bus.
+Users: OpenBMC. Proposed changes should be mailed to
+ openbmc@lists.ozlabs.org
+
+What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq
+Date: April 2017
+Contact: Jeremy Kerr <jk@ozlabs.org>
+Description: Configures which interrupt number the host side of
+ the UART will appear on the host <-> BMC LPC bus.
+Users: OpenBMC. Proposed changes should be mailed to
+ openbmc@lists.ozlabs.org
+
+What: /sys/bus/platform/drivers/aspeed-vuart/*/sirq_polarity
+Date: July 2019
+Contact: Oskar Senft <osk@google.com>
+Description: Configures the polarity of the serial interrupt to the
+ host via the BMC LPC bus.
+ Set to 0 for active-low or 1 for active-high.
+Users: OpenBMC. Proposed changes should be mailed to
+ openbmc@lists.ozlabs.org
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd
new file mode 100644
index 000000000..3becc9a82
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -0,0 +1,304 @@
+What: /sys/bus/dsa/devices/dsa<m>/version
+Date: Apr 15, 2020
+KernelVersion: 5.8.0
+Contact: dmaengine@vger.kernel.org
+Description: The hardware version number.
+
+What: /sys/bus/dsa/devices/dsa<m>/cdev_major
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The major number that the character device driver assigned to
+ this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/errors
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The error information for this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/max_batch_size
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The largest number of work descriptors in a batch.
+ It's not visible when the device does not support batch.
+
+What: /sys/bus/dsa/devices/dsa<m>/max_work_queues_size
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The maximum work queue size supported by this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/max_engines
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The maximum number of engines supported by this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/max_groups
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The maximum number of groups can be created under this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/max_read_buffers
+Date: Dec 10, 2021
+KernelVersion: 5.17.0
+Contact: dmaengine@vger.kernel.org
+Description: The total number of read buffers supported by this device.
+ The read buffers represent resources within the DSA
+ implementation, and these resources are allocated by engines to
+ support operations. See DSA spec v1.2 9.2.4 Total Read Buffers.
+ It's not visible when the device does not support Read Buffer
+ allocation control.
+
+What: /sys/bus/dsa/devices/dsa<m>/max_transfer_size
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The number of bytes to be read from the source address to
+ perform the operation. The maximum transfer size is dependent on
+ the workqueue the descriptor was submitted to.
+
+What: /sys/bus/dsa/devices/dsa<m>/max_work_queues
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The maximum work queue number that this device supports.
+
+What: /sys/bus/dsa/devices/dsa<m>/numa_node
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The numa node number for this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/op_cap
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The operation capability bit mask specify the operation types
+ supported by the this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/pasid_enabled
+Date: Oct 27, 2020
+KernelVersion: 5.11.0
+Contact: dmaengine@vger.kernel.org
+Description: To indicate if PASID (process address space identifier) is
+ enabled or not for this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/state
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The state information of this device. It can be either enabled
+ or disabled.
+
+What: /sys/bus/dsa/devices/dsa<m>/group<m>.<n>
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The assigned group under this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/engine<m>.<n>
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The assigned engine under this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/wq<m>.<n>
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The assigned work queue under this device.
+
+What: /sys/bus/dsa/devices/dsa<m>/configurable
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: To indicate if this device is configurable or not.
+
+What: /sys/bus/dsa/devices/dsa<m>/read_buffer_limit
+Date: Dec 10, 2021
+KernelVersion: 5.17.0
+Contact: dmaengine@vger.kernel.org
+Description: The maximum number of read buffers that may be in use at
+ one time by operations that access low bandwidth memory in the
+ device. See DSA spec v1.2 9.2.8 GENCFG on Global Read Buffer Limit.
+ It's not visible when the device does not support Read Buffer
+ allocation control.
+
+What: /sys/bus/dsa/devices/dsa<m>/cmd_status
+Date: Aug 28, 2020
+KernelVersion: 5.10.0
+Contact: dmaengine@vger.kernel.org
+Description: The last executed device administrative command's status/error.
+ Also last configuration error overloaded.
+ Writing to it will clear the status.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/block_on_fault
+Date: Oct 27, 2020
+KernelVersion: 5.11.0
+Contact: dmaengine@vger.kernel.org
+Description: To indicate block on fault is allowed or not for the work queue
+ to support on demand paging.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/group_id
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The group id that this work queue belongs to.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/size
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The work queue size for this work queue.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/type
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The type of this work queue, it can be "kernel" type for work
+ queue usages in the kernel space or "user" type for work queue
+ usages by applications in user space.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/cdev_minor
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The minor number assigned to this work queue by the character
+ device driver.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/mode
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The work queue mode type for this work queue.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/priority
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The priority value of this work queue, it is a value relative to
+ other work queue in the same group to control quality of service
+ for dispatching work from multiple workqueues in the same group.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/state
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The current state of the work queue.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/threshold
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The number of entries in this work queue that may be filled
+ via a limited portal.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/max_transfer_size
+Date: Aug 28, 2020
+KernelVersion: 5.10.0
+Contact: dmaengine@vger.kernel.org
+Description: The max transfer sized for this workqueue. Cannot exceed device
+ max transfer size. Configurable parameter.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/max_batch_size
+Date: Aug 28, 2020
+KernelVersion: 5.10.0
+Contact: dmaengine@vger.kernel.org
+Description: The max batch size for this workqueue. Cannot exceed device
+ max batch size. Configurable parameter.
+ It's not visible when the device does not support batch.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/ats_disable
+Date: Nov 13, 2020
+KernelVersion: 5.11.0
+Contact: dmaengine@vger.kernel.org
+Description: Indicate whether ATS disable is turned on for the workqueue.
+ 0 indicates ATS is on, and 1 indicates ATS is off for the workqueue.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/occupancy
+Date May 25, 2021
+KernelVersion: 5.14.0
+Contact: dmaengine@vger.kernel.org
+Description: Show the current number of entries in this WQ if WQ Occupancy
+ Support bit WQ capabilities is 1.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/enqcmds_retries
+Date Oct 29, 2021
+KernelVersion: 5.17.0
+Contact: dmaengine@vger.kernel.org
+Description: Indicate the number of retires for an enqcmds submission on a sharedwq.
+ A max value to set attribute is capped at 64.
+
+What: /sys/bus/dsa/devices/wq<m>.<n>/op_config
+Date: Sept 14, 2022
+KernelVersion: 6.0.0
+Contact: dmaengine@vger.kernel.org
+Description: Shows the operation capability bits displayed in bitmap format
+ presented by %*pb printk() output format specifier.
+ The attribute can be configured when the WQ is disabled in
+ order to configure the WQ to accept specific bits that
+ correlates to the operations allowed. It's visible only
+ on platforms that support the capability.
+
+What: /sys/bus/dsa/devices/engine<m>.<n>/group_id
+Date: Oct 25, 2019
+KernelVersion: 5.6.0
+Contact: dmaengine@vger.kernel.org
+Description: The group that this engine belongs to.
+
+What: /sys/bus/dsa/devices/group<m>.<n>/use_read_buffer_limit
+Date: Dec 10, 2021
+KernelVersion: 5.17.0
+Contact: dmaengine@vger.kernel.org
+Description: Enable the use of global read buffer limit for the group. See DSA
+ spec v1.2 9.2.18 GRPCFG Use Global Read Buffer Limit.
+ It's not visible when the device does not support Read Buffer
+ allocation control.
+
+What: /sys/bus/dsa/devices/group<m>.<n>/read_buffers_allowed
+Date: Dec 10, 2021
+KernelVersion: 5.17.0
+Contact: dmaengine@vger.kernel.org
+Description: Indicates max number of read buffers that may be in use at one time
+ by all engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read
+ Buffers Allowed.
+ It's not visible when the device does not support Read Buffer
+ allocation control.
+
+What: /sys/bus/dsa/devices/group<m>.<n>/read_buffers_reserved
+Date: Dec 10, 2021
+KernelVersion: 5.17.0
+Contact: dmaengine@vger.kernel.org
+Description: Indicates the number of Read Buffers reserved for the use of
+ engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read Buffers
+ Reserved.
+ It's not visible when the device does not support Read Buffer
+ allocation control.
+
+What: /sys/bus/dsa/devices/group<m>.<n>/desc_progress_limit
+Date: Sept 14, 2022
+KernelVersion: 6.0.0
+Contact: dmaengine@vger.kernel.org
+Description: Allows control of the number of work descriptors that can be
+ concurrently processed by an engine in the group as a fraction
+ of the Maximum Work Descriptors in Progress value specified in
+ the ENGCAP register. The acceptable values are 0 (default),
+ 1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
+ the max value). It's visible only on platforms that support
+ the capability.
+
+What: /sys/bus/dsa/devices/group<m>.<n>/batch_progress_limit
+Date: Sept 14, 2022
+KernelVersion: 6.0.0
+Contact: dmaengine@vger.kernel.org
+Description: Allows control of the number of batch descriptors that can be
+ concurrently processed by an engine in the group as a fraction
+ of the Maximum Batch Descriptors in Progress value specified in
+ the ENGCAP register. The acceptable values are 0 (default),
+ 1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
+ the max value). It's visible only on platforms that support
+ the capability.
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-ioatdma b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
new file mode 100644
index 000000000..3a4e2cd0d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
@@ -0,0 +1,30 @@
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL,
+ DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT.
+
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: The number of descriptors active in the ring.
+
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: Descriptor ring size, total number of descriptors available.
+
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
+Date: December 3, 2009
+KernelVersion: 2.6.32
+Contact: dmaengine@vger.kernel.org
+Description: Version of ioatdma device.
+
+What: /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
+Date: August 8, 2017
+KernelVersion: 4.14
+Contact: dmaengine@vger.kernel.org
+Description: Tune-able interrupt delay value per channel basis.
diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
new file mode 100644
index 000000000..c3fec3c83
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
@@ -0,0 +1,256 @@
+What: /sys/devices/platform/firmware\:zynqmp-firmware/ggs*
+Date: March 2020
+KernelVersion: 5.6
+Contact: "Jolly Shah" <jollys@xilinx.com>
+Description:
+ Read/Write PMU global general storage register value,
+ GLOBAL_GEN_STORAGE{0:3}.
+ Global general storage register that can be used
+ by system to pass information between masters.
+
+ The register is reset during system or power-on
+ resets. Three registers are used by the FSBL and
+ other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
+
+ Usage::
+
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+ # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+ Example::
+
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+ # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+Users: Xilinx
+
+What: /sys/devices/platform/firmware\:zynqmp-firmware/pggs*
+Date: March 2020
+KernelVersion: 5.6
+Contact: "Jolly Shah" <jollys@xilinx.com>
+Description:
+ Read/Write PMU persistent global general storage register
+ value, PERS_GLOB_GEN_STORAGE{0:3}.
+ Persistent global general storage register that
+ can be used by system to pass information between
+ masters.
+
+ This register is only reset by the power-on reset
+ and maintains its value through a system reset.
+ Four registers are used by the FSBL and other Xilinx
+ software products: PERS_GLOB_GEN_STORAGE{4:7}.
+ Register is reset only by a POR reset.
+
+ Usage::
+
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+ # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+ Example::
+
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+ # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+Users: Xilinx
+
+What: /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+Date: March 2020
+KernelVersion: 5.6
+Contact: "Jolly Shah" <jollys@xilinx.com>
+Description:
+ This sysfs interface allows to set the shutdown scope for the
+ next shutdown request. When the next shutdown is performed, the
+ platform specific portion of PSCI-system_off can use the chosen
+ shutdown scope.
+
+ Following are available shutdown scopes(subtypes):
+
+ subsystem:
+ Only the APU along with all of its peripherals
+ not used by other processing units will be
+ shut down. This may result in the FPD power
+ domain being shut down provided that no other
+ processing unit uses FPD peripherals or DRAM.
+ ps_only:
+ The complete PS will be shut down, including the
+ RPU, PMU, etc. Only the PL domain (FPGA)
+ remains untouched.
+ system:
+ The complete system/device is shut down.
+
+ Usage::
+
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+ # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+ Example::
+
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+ # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+Users: Xilinx
+
+What: /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+Date: March 2020
+KernelVersion: 5.6
+Contact: "Jolly Shah" <jollys@xilinx.com>
+Description:
+ This sysfs interface allows to set the health status. If PMUFW
+ is compiled with CHECK_HEALTHY_BOOT, it will check the healthy
+ bit on FPD WDT expiration. If healthy bit is set by a user
+ application running in Linux, PMUFW will do APU only restart. If
+ healthy bit is not set during FPD WDT expiration, PMUFW will do
+ system restart.
+
+ Usage:
+
+ Set healthy bit::
+
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+ Unset healthy bit::
+
+ # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+Users: Xilinx
+
+What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+Date: Feb 2022
+KernelVersion: 5.18
+Contact: "Ronak Jain" <ronak.jain@xilinx.com>
+Description:
+ This sysfs interface allows user to configure features at
+ runtime. The user can enable or disable features running at
+ firmware as well as the user can configure the parameters of
+ the features at runtime. The supported features are over
+ temperature and external watchdog. Here, the external watchdog
+ is completely different than the /dev/watchdog as the external
+ watchdog is running on the firmware and it is used to monitor
+ the health of firmware not APU(Linux). Also, the external
+ watchdog is interfaced outside of the zynqmp soc.
+
+ The supported config ids are for the feature configuration is,
+ 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+ disable the over temperature feature.
+ 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+ over temperature limit in Degree Celsius.
+ 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+ the external watchdog feature.
+ 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+ external watchdog feature.
+
+ Usage:
+
+ Select over temperature config ID to enable/disable feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+ Check over temperature config ID is selected or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ The expected result is 1.
+
+ Select over temperature config ID to configure OT limit
+ # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+ Check over temperature config ID is selected or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ The expected result is 2.
+
+ Select external watchdog config ID to enable/disable feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+ Check external watchdog config ID is selected or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ The expected result is 3.
+
+ Select external watchdog config ID to configure time interval
+ # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+ Check external watchdog config ID is selected or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ The expected result is 4.
+
+Users: Xilinx
+
+What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+Date: Feb 2022
+KernelVersion: 5.18
+Contact: "Ronak Jain" <ronak.jain@xilinx.com>
+Description:
+ This sysfs interface allows to configure features at runtime.
+ The user can enable or disable features running at firmware.
+ Also, the user can configure the parameters of the features
+ at runtime. The supported features are over temperature and
+ external watchdog. Here, the external watchdog is completely
+ different than the /dev/watchdog as the external watchdog is
+ running on the firmware and it is used to monitor the health
+ of firmware not APU(Linux). Also, the external watchdog is
+ interfaced outside of the zynqmp soc.
+
+ By default the features are disabled in the firmware. The user
+ can enable features by querying appropriate config id of the
+ features.
+
+ The default limit for the over temperature is 90 Degree Celsius.
+ The default timer interval for the external watchdog is 570ms.
+
+ The supported config ids are for the feature configuration is,
+ 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+ disable the over temperature feature.
+ 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+ over temperature limit in Degree Celsius.
+ 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+ the external watchdog feature.
+ 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+ external watchdog feature.
+
+ Usage:
+
+ Enable over temperature feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature feature is enabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 1.
+
+ Disable over temperature feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature feature is disabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 0.
+
+ Configure over temperature limit to 50 Degree Celsius
+ # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature limit is configured or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 50.
+
+ Enable external watchdog feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog feature is enabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 1.
+
+ Disable external watchdog feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog feature is disabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 0.
+
+ Configure external watchdog timer interval to 500ms
+ # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog timer interval is configured or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 500.
+
+Users: Xilinx
diff --git a/Documentation/ABI/stable/sysfs-driver-ib_srp b/Documentation/ABI/stable/sysfs-driver-ib_srp
new file mode 100644
index 000000000..bada15a32
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-ib_srp
@@ -0,0 +1,192 @@
+What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/add_target
+Date: January 2, 2006
+KernelVersion: 2.6.15
+Contact: linux-rdma@vger.kernel.org
+Description: Interface for making ib_srp connect to a new target.
+ One can request ib_srp to connect to a new target by writing
+ a comma-separated list of login parameters to this sysfs
+ attribute. The supported parameters are:
+
+ * id_ext, a 16-digit hexadecimal number specifying the eight
+ byte identifier extension in the 16-byte SRP target port
+ identifier. The target port identifier is sent by ib_srp
+ to the target in the SRP_LOGIN_REQ request.
+ * ioc_guid, a 16-digit hexadecimal number specifying the eight
+ byte I/O controller GUID portion of the 16-byte target port
+ identifier.
+ * dgid, a 32-digit hexadecimal number specifying the
+ destination GID.
+ * pkey, a four-digit hexadecimal number specifying the
+ InfiniBand partition key.
+ * service_id, a 16-digit hexadecimal number specifying the
+ InfiniBand service ID used to establish communication with
+ the SRP target. How to find out the value of the service ID
+ is specified in the documentation of the SRP target.
+ * max_sect, a decimal number specifying the maximum number of
+ 512-byte sectors to be transferred via a single SCSI command.
+ * max_cmd_per_lun, a decimal number specifying the maximum
+ number of outstanding commands for a single LUN.
+ * io_class, a hexadecimal number specifying the SRP I/O class.
+ Must be either 0xff00 (rev 10) or 0x0100 (rev 16a). The I/O
+ class defines the format of the SRP initiator and target
+ port identifiers.
+ * initiator_ext, a 16-digit hexadecimal number specifying the
+ identifier extension portion of the SRP initiator port
+ identifier. This data is sent by the initiator to the target
+ in the SRP_LOGIN_REQ request.
+ * cmd_sg_entries, a number in the range 1..255 that specifies
+ the maximum number of data buffer descriptors stored in the
+ SRP_CMD information unit itself. With allow_ext_sg=0 the
+ parameter cmd_sg_entries defines the maximum S/G list length
+ for a single SRP_CMD, and commands whose S/G list length
+ exceeds this limit after S/G list collapsing will fail.
+ * allow_ext_sg, whether ib_srp is allowed to include a partial
+ memory descriptor list in an SRP_CMD instead of the entire
+ list. If a partial memory descriptor list has been included
+ in an SRP_CMD the remaining memory descriptors are
+ communicated from initiator to target via an additional RDMA
+ transfer. Setting allow_ext_sg to 1 increases the maximum
+ amount of data that can be transferred between initiator and
+ target via a single SCSI command. Since not all SRP target
+ implementations support partial memory descriptor lists the
+ default value for this option is 0.
+ * sg_tablesize, a number in the range 1..2048 specifying the
+ maximum S/G list length the SCSI layer is allowed to pass to
+ ib_srp. Specifying a value that exceeds cmd_sg_entries is
+ only safe with partial memory descriptor list support enabled
+ (allow_ext_sg=1).
+ * comp_vector, a number in the range 0..n-1 specifying the
+ MSI-X completion vector of the first RDMA channel. Some
+ HCA's allocate multiple (n) MSI-X vectors per HCA port. If
+ the IRQ affinity masks of these interrupts have been
+ configured such that each MSI-X interrupt is handled by a
+ different CPU then the comp_vector parameter can be used to
+ spread the SRP completion workload over multiple CPU's.
+ * tl_retry_count, a number in the range 2..7 specifying the
+ IB RC retry count.
+ * queue_size, the maximum number of commands that the
+ initiator is allowed to queue per SCSI host. The default
+ value for this parameter is 62. The lowest supported value
+ is 2.
+ * max_it_iu_size, a decimal number specifying the maximum
+ initiator to target information unit length.
+
+What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
+Date: January 2, 2006
+KernelVersion: 2.6.15
+Contact: linux-rdma@vger.kernel.org
+Description: HCA name (<hca>).
+
+What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/port
+Date: January 2, 2006
+KernelVersion: 2.6.15
+Contact: linux-rdma@vger.kernel.org
+Description: HCA port number (<port_number>).
+
+What: /sys/class/scsi_host/host<n>/allow_ext_sg
+Date: May 19, 2011
+KernelVersion: 2.6.39
+Contact: linux-rdma@vger.kernel.org
+Description: Whether ib_srp is allowed to include a partial memory
+ descriptor list in an SRP_CMD when communicating with an SRP
+ target.
+
+What: /sys/class/scsi_host/host<n>/ch_count
+Date: April 1, 2015
+KernelVersion: 3.19
+Contact: linux-rdma@vger.kernel.org
+Description: Number of RDMA channels used for communication with the SRP
+ target.
+
+What: /sys/class/scsi_host/host<n>/cmd_sg_entries
+Date: May 19, 2011
+KernelVersion: 2.6.39
+Contact: linux-rdma@vger.kernel.org
+Description: Maximum number of data buffer descriptors that may be sent to
+ the target in a single SRP_CMD request.
+
+What: /sys/class/scsi_host/host<n>/comp_vector
+Date: September 2, 2013
+KernelVersion: 3.11
+Contact: linux-rdma@vger.kernel.org
+Description: Completion vector used for the first RDMA channel.
+
+What: /sys/class/scsi_host/host<n>/dgid
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: InfiniBand destination GID used for communication with the SRP
+ target. Differs from orig_dgid if port redirection has happened.
+
+What: /sys/class/scsi_host/host<n>/id_ext
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: Eight-byte identifier extension portion of the 16-byte target
+ port identifier.
+
+What: /sys/class/scsi_host/host<n>/ioc_guid
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: Eight-byte I/O controller GUID portion of the 16-byte target
+ port identifier.
+
+What: /sys/class/scsi_host/host<n>/local_ib_device
+Date: November 29, 2006
+KernelVersion: 2.6.19
+Contact: linux-rdma@vger.kernel.org
+Description: Name of the InfiniBand HCA used for communicating with the
+ SRP target.
+
+What: /sys/class/scsi_host/host<n>/local_ib_port
+Date: November 29, 2006
+KernelVersion: 2.6.19
+Contact: linux-rdma@vger.kernel.org
+Description: Number of the HCA port used for communicating with the
+ SRP target.
+
+What: /sys/class/scsi_host/host<n>/orig_dgid
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: InfiniBand destination GID specified in the parameters
+ written to the add_target sysfs attribute.
+
+What: /sys/class/scsi_host/host<n>/pkey
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: A 16-bit number representing the InfiniBand partition key used
+ for communication with the SRP target.
+
+What: /sys/class/scsi_host/host<n>/req_lim
+Date: October 20, 2010
+KernelVersion: 2.6.36
+Contact: linux-rdma@vger.kernel.org
+Description: Number of requests ib_srp can send to the target before it has
+ to wait for more credits. For more information see also the
+ SRP credit algorithm in the SRP specification.
+
+What: /sys/class/scsi_host/host<n>/service_id
+Date: June 17, 2006
+KernelVersion: 2.6.17
+Contact: linux-rdma@vger.kernel.org
+Description: InfiniBand service ID used for establishing communication with
+ the SRP target.
+
+What: /sys/class/scsi_host/host<n>/sgid
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-rdma@vger.kernel.org
+Description: InfiniBand GID of the source port used for communication with
+ the SRP target.
+
+What: /sys/class/scsi_host/host<n>/zero_req_lim
+Date: September 20, 2006
+KernelVersion: 2.6.18
+Contact: linux-rdma@vger.kernel.org
+Description: Number of times the initiator had to wait before sending a
+ request to the target because it ran out of credits. For more
+ information see also the SRP credit algorithm in the SRP
+ specification.
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
new file mode 100644
index 000000000..af0cbf143
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -0,0 +1,544 @@
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows ASIC health status. The possible values are:
+ 0 - health failed, 2 - health OK, 3 - ASIC in booting state.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD versions have been burned
+ on carrier and switch boards.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
+Date: December 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows the system fans direction:
+ forward direction - relevant bit is set 0;
+ reversed direction - relevant bit is set 1.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
+Date: November 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD versions have been burned
+ on LED or Gearbox board.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
+Date: November 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files enable and disable the access to the JTAG domain.
+ By default access to the JTAG domain is disabled.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows iio devices selection.
+
+ Attribute select_iio can be written with 0 or with 1. It
+ selects which one of iio devices can be accessed.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
+ /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on
+ /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle
+ /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow asserting system power cycling, switching
+ power supply units on and off and system's main power domain
+ shutdown.
+ Expected behavior:
+ When pwr_cycle is written 1: auxiliary power domain will go
+ down and after short period (about 1 second) up.
+ When psu1_on or psu2_on is written 1, related unit will be
+ disconnected from the power source, when written 0 - connected.
+ If both are written 1 - power supplies main power domain will
+ go down.
+ When pwr_down is written 1, system's main power domain will go
+ down.
+
+ The files are write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
+Date: June 2018
+KernelVersion: 4.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the system reset cause, as following: power
+ auxiliary outage or power refresh, ASIC thermal shutdown, halt,
+ hotswap, watchdog, firmware reset, long press power button,
+ short press power button, software reset. Value 1 in file means
+ this is reset cause, 0 - otherwise. Only one of the above
+ causes could be 1 at the same time, representing only last
+ reset cause.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
+Date: November 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the system reset cause, as following: ComEx
+ power fail, reset from ComEx, system platform reset, reset
+ due to voltage monitor devices upgrade failure,
+ Value 1 in file means this is reset cause, 0 - otherwise.
+ Only one bit could be 1 at the same time, representing only
+ the last reset cause.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
+Date: November 2018
+KernelVersion: 5.0
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD versions have been burned
+ on LED board.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
+Date: June 2019
+KernelVersion: 5.3
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the system reset cause, as following:
+ COMEX thermal shutdown; wathchdog power off or reset was derived
+ by one of the next components: COMEX, switch board or by Small Form
+ Factor mezzanine, reset requested from ASIC, reset caused by BIOS
+ reload. Value 1 in file means this is reset cause, 0 - otherwise.
+ Only one of the above causes could be 1 at the same time, representing
+ only last reset cause.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show system static topology identification
+ like system's static I2C topology, number and type of FPGA
+ devices within the system and so on.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the system reset causes, as following: reset
+ due to AC power failure, reset invoked from software by
+ assertion reset signal through CPLD. reset caused by signal
+ asserted by SOC through ACPI register, reset invoked from
+ software by assertion power off signal through CPLD.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to retain ASIC up during PCIe root complex
+ reset, when attribute is set 1.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to overwrite system VPD hardware write
+ protection when attribute is set 1.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file exposes the configuration update status of burnable
+ voltage regulator devices. The status values are as following:
+ 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file exposes the firmware version of burnable voltage
+ regulator devices.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
+Date: July 2020
+KernelVersion: 5.9
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD part numbers and minor
+ versions have been burned CPLD devices equipped on a
+ system.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_active_image
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_auth_fail
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_upgrade_fail
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: The files represent BIOS statuses:
+
+ bios_active_image: location of current active BIOS image:
+ 0: Top, 1: Bottom.
+ The reported value should correspond to value expected by OS
+ in case of BIOS safe mode is 0. This bit is related to Intel
+ top-swap feature of DualBios on the same flash.
+
+ bios_auth_fail: BIOS upgrade is failed because provided BIOS
+ image is not signed correctly.
+
+ bios_upgrade_fail: BIOS upgrade is failed by some other
+ reason not because authentication. For example due to
+ physical SPI flash problem.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_enable
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_enable
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow line cards enable state control.
+ Expected behavior:
+ When lc{n}_enable is written 1, related line card is released
+ from the reset state, when 0 - is hold in reset state.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_pwr
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_pwr
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files switching line cards power on and off.
+ Expected behavior:
+ When lc{n}_pwr is written 1, related line card is powered
+ on, when written 0 - powered off.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_rst_mask
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_rst_mask
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files clear line card reset bit enforced by ASIC, when it
+ sets it due to some abnormal ASIC behavior.
+ Expected behavior:
+ When lc{n}_rst_mask is written 1, related line card reset bit
+ is cleared, when written 0 - no effect.
+
+ The files are write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/os_started
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file, when written 1, indicates to programmable devices
+ that OS is taking control over it.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pm_mgmt_en
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file assigns power management control ownership.
+ When power management control is provided by hardware, hardware
+ will automatically power off one or more line previously
+ powered line cards in case system power budget is getting
+ insufficient. It could be in case when some of power units lost
+ power good state.
+ When pm_mgmt_en is written 1, power management control by
+ software is enabled, 0 - power management control by hardware.
+ Note that for any setting of pm_mgmt_en attribute hardware will
+ not allow to power on any new line card in case system power
+ budget is insufficient.
+ Same in case software will try to power on several line cards
+ at once - hardware will power line cards while system has
+ enough power budget.
+ Default is 0.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu3_on
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu4_on
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files switching power supply units on and off.
+ Expected behavior:
+ When psu3_on or psu4_on is written 1, related unit will be
+ disconnected from the power source, when written 0 - connected.
+
+ The files are write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to unlock ASIC after thermal shutdown event.
+ When system thermal shutdown is enforced by ASIC, ASIC is
+ getting locked and after system boot it will not be available.
+ Software can decide to unlock it by setting this attribute to
+ 1 and then perform system power cycle by setting pwr_cycle
+ attribute to 1 (power cycle of main power domain).
+ Before setting shutdown_unlock to 1 it is recommended to
+ validate that system reboot cause is reset_asic_thermal or
+ reset_thermal_spc_or_pciesw.
+ In case shutdown_unlock is not set 1, the only way to release
+ ASIC from locking - is full system power cycle through the
+ external power distribution unit.
+ Default is 1.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_pn
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version_min
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which CPLD major and minor versions
+ and part number has been burned CPLD device on line card.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_pn
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version_min
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show with which FPGA major and minor versions
+ and part number has been burned FPGA device on line card.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/vpd_wp
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allow to overwrite line card VPD hardware write
+ protection mode. When attribute is set 1 - write protection is
+ disabled, when 0 - enabled.
+ Default is 0.
+ If the system is in locked-down mode writing this file will not
+ be allowed.
+ The purpose if this file is to allow line card VPD burning
+ during production flow.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_ref
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_dc_dc_pwr_fail
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_fpga_not_done
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_from_chassis
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_line_card
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_pwr_off_from_chassis
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files show the line reset cause, as following: power
+ auxiliary outage or power refresh, DC-to-DC power failure, FPGA reset
+ failed, line card reset failed, power off from chassis.
+ Value 1 in file means this is reset cause, 0 - otherwise. Only one of
+ the above causes could be 1 at the same time, representing only last
+ reset cause.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld_upgrade_en
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_upgrade_en
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow CPLD and FPGA burning. Value 1 in file means burning
+ is enabled, 0 - otherwise.
+ If the system is in locked-down mode writing these files will
+ not be allowed.
+ The purpose of these files to allow line card CPLD and FPGA
+ upgrade through the JTAG daisy-chain.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/qsfp_pwr_en
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/pwr_en
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow to power on/off all QSFP ports and whole line card.
+ The attributes are set 1 for power on, 0 - for power off.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/agb_spi_burn_en
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_spi_burn_en
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow gearboxes and FPGA SPI flash burning.
+ The attributes are set 1 to enable burning, 0 - to disable.
+ If the system is in locked-down mode writing these files will
+ not be allowed.
+ The purpose of these files to allow line card Gearboxes and FPGA
+ burning during production flow.
+
+ The file is read/write.
+
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/max_power
+What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/config
+Date: October 2021
+KernelVersion: 5.16
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files provide the maximum powered required for line card
+ feeding and line card configuration Id.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset
+Date: May 2022
+KernelVersion: 5.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to reset PHY 88E1548 when attribute is set 0
+ due to some abnormal PHY behavior.
+ Expected behavior:
+ When phy_reset is written 1, all PHY 88E1548 are released
+ from the reset state, when 0 - are hold in reset state.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset
+Date: May 2022
+KernelVersion: 5.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file allows to reset ASIC MT52132 when attribute is set 0
+ due to some abnormal ASIC behavior.
+ Expected behavior:
+ When mac_reset is written 1, the ASIC MT52132 is released
+ from the reset state, when 0 - is hold in reset state.
+
+ The files are read/write.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good
+Date: May 2022
+KernelVersion: 5.19
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows QSFP ports power status. The value is set to 0
+ when one of any QSFP ports is plugged. The value is set to 1 when
+ there are no any QSFP ports are plugged.
+ The possible values are:
+ 0 - Power good, 1 - Not power good.
+
+ The files are read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health
+Date: July 2022
+KernelVersion: 5.20
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file shows 2-nd ASIC health status. The possible values are:
+ 0 - health failed, 2 - health OK, 3 - ASIC in booting state.
+
+ The file is read only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset
+Date: July 2022
+KernelVersion: 5.20
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: These files allow to each of ASICs by writing 1.
+
+ The files are write only.
+
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready
+Date: July 2022
+KernelVersion: 5.20
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: This file is used to indicate remote end (for example BMC) that system
+ host CPU is ready for sending telemetry data to remote end.
+ For indication the file should be written 1.
+
+ The file is write only.
+
+What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3
+Date: January 2020
+KernelVersion: 5.6
+Contact: Vadim Pasternak <vadimp@nvidia.com>
+Description: The file indicates COME module hardware configuration.
+ The value is pushed by hardware through GPIO pins.
+ The purpose is to expose some minor BOM changes for the same system SKU.
+
+ The file is read only.
diff --git a/Documentation/ABI/stable/sysfs-driver-qla2xxx b/Documentation/ABI/stable/sysfs-driver-qla2xxx
new file mode 100644
index 000000000..9a59d8449
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-qla2xxx
@@ -0,0 +1,8 @@
+What: /sys/bus/pci/drivers/qla2xxx/.../devices/*
+Date: September 2009
+Contact: QLogic Linux Driver <linux-driver@qlogic.com>
+Description: qla2xxx-udev.sh currently looks for uevent CHANGE events to
+ signal a firmware-dump has been generated by the driver and is
+ ready for retrieval.
+Users: qla2xxx-udev.sh. Proposed changes should be mailed to
+ linux-driver@qlogic.com
diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup
new file mode 100644
index 000000000..dc2a6ba16
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-speakup
@@ -0,0 +1,386 @@
+What: /sys/accessibility/speakup/attrib_bleep
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Beeps the PC speaker when there is an attribute change such as
+ foreground or background color when using speakup review
+ commands. One = on, zero = off.
+
+What: /sys/accessibility/speakup/bell_pos
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This works much like a typewriter bell. If for example 72 is
+ echoed to bell_pos, it will beep the PC speaker when typing on
+ a line past character 72.
+
+What: /sys/accessibility/speakup/bleeps
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls whether one hears beeps through the PC speaker
+ when using speakup's review commands.
+ TODO: what values does it accept?
+
+What: /sys/accessibility/speakup/bleep_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls the duration of the PC speaker beeps speakup
+ produces.
+ TODO: What are the units? Jiffies?
+
+What: /sys/accessibility/speakup/cursor_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls cursor delay when using arrow keys. When a
+ connection is very slow, with the default setting, when moving
+ with the arrows, or backspacing etc. speakup says the incorrect
+ characters. Set this to a higher value to adjust for the delay
+ and better synchronisation between cursor position and speech.
+
+What: /sys/accessibility/speakup/delimiters
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Delimit a word from speakup.
+ TODO: add more info
+
+What: /sys/accessibility/speakup/ex_num
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/key_echo
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Controls if speakup speaks keys when they are typed. One = on,
+ zero = off or don't echo keys.
+
+What: /sys/accessibility/speakup/keymap
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Speakup keymap remaps keys to Speakup functions.
+ It uses a binary
+ format. A special program called genmap is needed to compile a
+ textual keymap into the binary format which is then loaded into
+ /sys/accessibility/speakup/keymap.
+
+What: /sys/accessibility/speakup/no_interrupt
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Controls if typing interrupts output from speakup. With
+ no_interrupt set to zero, typing on the keyboard will interrupt
+ speakup if for example
+ the say screen command is used before the
+ entire screen is read.
+
+ With no_interrupt set to one, if the say
+ screen command is used, and one then types on the keyboard,
+ speakup will continue to say the whole screen regardless until
+ it finishes.
+
+What: /sys/accessibility/speakup/punc_all
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is a list of all the punctuation speakup should speak when
+ punc_level is set to four.
+
+What: /sys/accessibility/speakup/punc_level
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Controls the level of punctuation spoken as the screen is
+ displayed, not reviewed. Levels range from zero no punctuation,
+ to four, all punctuation. One corresponds to punc_some, two
+ corresponds to punc_most, and three as well as four both
+ correspond to punc_all. Some hardware synthesizers may have
+ different levels each corresponding to three and four for
+ punc_level. Also note that if punc_level is set to zero, and
+ key_echo is set to one, typed punctuation is still spoken as it
+ is typed.
+
+What: /sys/accessibility/speakup/punc_most
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is a list of all the punctuation speakup should speak when
+ punc_level is set to two.
+
+What: /sys/accessibility/speakup/punc_some
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is a list of all the punctuation speakup should speak when
+ punc_level is set to one.
+
+What: /sys/accessibility/speakup/reading_punc
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Almost the same as punc_level, the differences being that
+ reading_punc controls the level of punctuation when reviewing
+ the screen with speakup's screen review commands. The other
+ difference is that reading_punc set to three speaks punc_all,
+ and reading_punc set to four speaks all punctuation, including
+ spaces.
+
+What: /sys/accessibility/speakup/repeats
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: A list of characters speakup repeats. Normally, when there are
+ more than three characters in a row, speakup
+ just reads three of
+ those characters. For example, "......" would be read as dot,
+ dot, dot. If a . is added to the list of characters in repeats,
+ "......" would be read as dot, dot, dot, times six.
+
+What: /sys/accessibility/speakup/say_control
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: If set to one, speakup speaks shift, alt and control when those
+ keys are pressed. If say_control is set to zero, shift, ctrl,
+ and alt are not spoken when they are pressed.
+
+What: /sys/accessibility/speakup/say_word_ctl
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/silent
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/spell_delay
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls how fast a word is spelled
+ when speakup's say word
+ review command is pressed twice quickly to speak the current
+ word being reviewed. Zero just speaks the letters one after
+ another, while values one through four
+ seem to introduce more of
+ a pause between the spelling of each letter by speakup.
+
+What: /sys/accessibility/speakup/synth
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the synthesizer driver currently in use. Reading
+ synth returns the synthesizer driver currently in use. Writing
+ synth switches to the given synthesizer driver, provided it is
+ either built into the kernel, or already loaded as a module.
+
+What: /sys/accessibility/speakup/synth_direct
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Sends whatever is written to synth_direct
+ directly to the speech synthesizer in use, bypassing speakup.
+ This could be used to make the synthesizer speak
+ a string, or to
+ send control sequences to the synthesizer to change how the
+ synthesizer behaves.
+
+What: /sys/accessibility/speakup/version
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Reading version returns the version of speakup, and the version
+ of the synthesizer driver currently in use.
+
+What: /sys/accessibility/speakup/i18n/announcements
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This file contains various general announcements, most of which
+ cannot be categorized. You will find messages such as "You
+ killed Speakup", "I'm alive", "leaving help", "parked",
+ "unparked", and others. You will also find the names of the
+ screen edges and cursor tracking modes here.
+
+What: /sys/accessibility/speakup/i18n/chartab
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO
+
+What: /sys/accessibility/speakup/i18n/ctl_keys
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Here, you will find names of control keys. These are used with
+ Speakup's say_control feature.
+
+What: /sys/accessibility/speakup/i18n/function_names
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Here, you will find a list of names for Speakup functions.
+ These are used by the help system. For example, suppose that
+ you have activated help mode, and you pressed
+ keypad 3. Speakup
+ says: "keypad 3 is character, say next."
+ The message "character, say next" names a Speakup function, and
+ it comes from this function_names file.
+
+What: /sys/accessibility/speakup/i18n/states
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This file contains names for key states.
+ Again, these are part of the help system. For instance, if you
+ had pressed speakup + keypad 3, you would hear:
+ "speakup keypad 3 is go to bottom edge."
+
+ The speakup key is depressed, so the name of the key state is
+ speakup.
+
+ This part of the message comes from the states collection.
+
+What: /sys/accessibility/speakup/i18n/characters
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Through this sys entry, Speakup gives you the ability to change
+ how Speakup pronounces a given character. You could, for
+ example, change how some punctuation characters are spoken. You
+ can even change how Speakup will pronounce certain letters. For
+ further details see '12. Changing the Pronunciation of
+ Characters' in Speakup User's Guide (file spkguide.txt in
+ source).
+
+What: /sys/accessibility/speakup/i18n/colors
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: When you use the "say attributes" function, Speakup says the
+ name of the foreground and background colors. These names come
+ from the i18n/colors file.
+
+What: /sys/accessibility/speakup/i18n/formatted
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This group of messages contains embedded formatting codes, to
+ specify the type and width of displayed data. If you change
+ these, you must preserve all of the formatting codes, and they
+ must appear in the order used by the default messages.
+
+What: /sys/accessibility/speakup/i18n/key_names
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Again, key_names is used by Speakup's help system. In the
+ previous example, Speakup said that you pressed "keypad 3."
+ This name came from the key_names file.
+
+What: /sys/accessibility/speakup/<synth-name>/
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: In `/sys/accessibility/speakup` is a directory corresponding to
+ the synthesizer driver currently in use (E.G) `soft` for the
+ soft driver. This directory contains files which control the
+ speech synthesizer itself,
+ as opposed to controlling the speakup
+ screen reader. The parameters in this directory have the same
+ names and functions across all
+ supported synthesizers. The range
+ of values for freq, pitch, rate, and vol is the same for all
+ supported synthesizers, with the given range being internally
+ mapped by the driver to more or less fit the range of values
+ supported for a given parameter by the individual synthesizer.
+ Below is a description of values and parameters for soft
+ synthesizer, which is currently the most commonly used.
+
+What: /sys/accessibility/speakup/<synth-name>/caps_start
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is the string that is sent to the synthesizer to cause it
+ to start speaking uppercase letters. For the soft synthesizer
+ and most others, this causes the pitch of the voice to rise
+ above the currently set pitch.
+
+What: /sys/accessibility/speakup/<synth-name>/caps_stop
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This is the string sent to the synthesizer to cause it to stop
+ speaking uppercase letters. In the case of the soft synthesizer
+ and most others, this returns the pitch of the voice
+ down to the
+ currently set pitch.
+
+What: /sys/accessibility/speakup/<synth-name>/delay_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/<synth-name>/direct
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Controls if punctuation is spoken by speakup, or by the
+ synthesizer.
+
+ For example, speakup speaks ">" as "greater", while
+ the espeak synthesizer used by the soft driver speaks "greater
+ than". Zero lets speakup speak the punctuation. One lets the
+ synthesizer itself speak punctuation.
+
+What: /sys/accessibility/speakup/<synth-name>/freq
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the frequency of the speech synthesizer. Range is
+ 0-9.
+
+What: /sys/accessibility/speakup/<synth-name>/flush_time
+KernelVersion: 5.12
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the timeout to wait for the synthesizer flush to
+ complete. This can be used when the cable gets faulty and flush
+ notifications are getting lost.
+
+What: /sys/accessibility/speakup/<synth-name>/full_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/<synth-name>/jiffy_delta
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: This controls how many jiffys the kernel gives to the
+ synthesizer. Setting this too high can make a system unstable,
+ or even crash it.
+
+What: /sys/accessibility/speakup/<synth-name>/pitch
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the pitch of the synthesizer. The range is 0-9.
+
+What: /sys/accessibility/speakup/<synth-name>/inflection
+KernelVersion: 5.8
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the inflection of the synthesizer, i.e. the pitch
+ range. The range is 0-9.
+
+What: /sys/accessibility/speakup/<synth-name>/punct
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the amount of punctuation spoken by the
+ synthesizer. The range for the soft driver seems to be 0-2.
+ TODO: How is this related to speakup's punc_level, or
+ reading_punc.
+
+What: /sys/accessibility/speakup/<synth-name>/rate
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the rate of the synthesizer. Range is from zero
+ slowest, to nine fastest.
+
+What: /sys/accessibility/speakup/<synth-name>/tone
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the tone of the speech synthesizer. The range for
+ the soft driver seems to be 0-2. This seems to make no
+ difference if using espeak and the espeakup connector.
+ TODO: does espeakup support different tonalities?
+
+What: /sys/accessibility/speakup/<synth-name>/trigger_time
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: TODO:
+
+What: /sys/accessibility/speakup/<synth-name>/voice
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the voice used by the synthesizer if the
+ synthesizer can speak in more than one voice. The range for the
+ soft driver is 0-7. Note that while espeak supports multiple
+ voices, this parameter will not set the voice when the espeakup
+ connector is used between speakup and espeak.
+
+What: /sys/accessibility/speakup/<synth-name>/vol
+KernelVersion: 2.6
+Contact: speakup@linux-speakup.org
+Description: Gets or sets the volume of the speech synthesizer. Range is 0-9,
+ with zero being the softest, and nine being the loudest.
+
diff --git a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
new file mode 100644
index 000000000..a9e123ba3
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
@@ -0,0 +1,27 @@
+What: /sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What: /sys/bus/usb/drivers/usbtmc/*/device_capabilities
+Date: August 2008
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+ These files show the various USB TMC capabilities as described
+ by the device itself. The full description of the bitfields
+ can be found in the USB TMC documents from the USB-IF entitled
+ "Universal Serial Bus Test and Measurement Class Specification
+ (USBTMC) Revision 1.0" section 4.2.1.8.
+
+ The files are read only.
+
+
+What: /sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What: /sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
+Date: August 2008
+Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+ These files show the various USB TMC capabilities as described
+ by the device itself. The full description of the bitfields
+ can be found in the USB TMC documents from the USB-IF entitled
+ "Universal Serial Bus Test and Measurement Class, Subclass
+ USB488 Specification (USBTMC-USB488) Revision 1.0" section
+ 4.2.2.
+
+ The files are read only.
diff --git a/Documentation/ABI/stable/sysfs-driver-w1_ds2438 b/Documentation/ABI/stable/sysfs-driver-w1_ds2438
new file mode 100644
index 000000000..d2e7681cc
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-w1_ds2438
@@ -0,0 +1,13 @@
+What: /sys/bus/w1/devices/.../page1
+Date: April 2021
+Contact: Luiz Sampaio <sampaio.ime@gmail.com>
+Description: read the contents of the page1 of the DS2438
+ see Documentation/w1/slaves/w1_ds2438.rst for detailed information
+Users: any user space application which wants to communicate with DS2438
+
+What: /sys/bus/w1/devices/.../offset
+Date: April 2021
+Contact: Luiz Sampaio <sampaio.ime@gmail.com>
+Description: write the contents to the offset register of the DS2438
+ see Documentation/w1/slaves/w1_ds2438.rst for detailed information
+Users: any user space application which wants to communicate with DS2438
diff --git a/Documentation/ABI/stable/sysfs-driver-w1_ds28e04 b/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
new file mode 100644
index 000000000..3e1c1fa8d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
@@ -0,0 +1,15 @@
+What: /sys/bus/w1/devices/.../pio
+Date: May 2012
+Contact: Markus Franke <franm@hrz.tu-chemnitz.de>
+Description: read/write the contents of the two PIO's of the DS28E04-100
+ see Documentation/w1/slaves/w1_ds28e04.rst for detailed information
+Users: any user space application which wants to communicate with DS28E04-100
+
+
+
+What: /sys/bus/w1/devices/.../eeprom
+Date: May 2012
+Contact: Markus Franke <franm@hrz.tu-chemnitz.de>
+Description: read/write the contents of the EEPROM memory of the DS28E04-100
+ see Documentation/w1/slaves/w1_ds28e04.rst for detailed information
+Users: any user space application which wants to communicate with DS28E04-100
diff --git a/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00 b/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00
new file mode 100644
index 000000000..534e63731
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00
@@ -0,0 +1,6 @@
+What: /sys/bus/w1/devices/.../w1_seq
+Date: Apr 2015
+Contact: Matt Campbell <mattrcampbell@gmail.com>
+Description: Support for the DS28EA00 chain sequence function
+ see Documentation/w1/slaves/w1_therm.rst for detailed information
+Users: any user space application which wants to communicate with DS28EA00
diff --git a/Documentation/ABI/stable/sysfs-firmware-efi-vars b/Documentation/ABI/stable/sysfs-firmware-efi-vars
new file mode 100644
index 000000000..46ccd233e
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-firmware-efi-vars
@@ -0,0 +1,79 @@
+What: /sys/firmware/efi/vars
+Date: April 2004
+Contact: Matt Domsch <Matt_Domsch@dell.com>
+Description:
+ This directory exposes interfaces for interactive with
+ EFI variables. For more information on EFI variables,
+ see 'Variable Services' in the UEFI specification
+ (section 7.2 in specification version 2.3 Errata D).
+
+ In summary, EFI variables are named, and are classified
+ into separate namespaces through the use of a vendor
+ GUID. They also have an arbitrary binary value
+ associated with them.
+
+ The efivars module enumerates these variables and
+ creates a separate directory for each one found. Each
+ directory has a name of the form "<key>-<vendor guid>"
+ and contains the following files:
+
+ =============== ========================================
+ attributes: A read-only text file enumerating the
+ EFI variable flags. Potential values
+ include:
+
+ EFI_VARIABLE_NON_VOLATILE
+ EFI_VARIABLE_BOOTSERVICE_ACCESS
+ EFI_VARIABLE_RUNTIME_ACCESS
+ EFI_VARIABLE_HARDWARE_ERROR_RECORD
+ EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS
+
+ See the EFI documentation for an
+ explanation of each of these variables.
+
+ data: A read-only binary file that can be read
+ to attain the value of the EFI variable
+
+ guid: The vendor GUID of the variable. This
+ should always match the GUID in the
+ variable's name.
+
+ raw_var: A binary file that can be read to obtain
+ a structure that contains everything
+ there is to know about the variable.
+ For structure definition see "struct
+ efi_variable" in the kernel sources.
+
+ This file can also be written to in
+ order to update the value of a variable.
+ For this to work however, all fields of
+ the "struct efi_variable" passed must
+ match byte for byte with the structure
+ read out of the file, save for the value
+ portion.
+
+ **Note** the efi_variable structure
+ read/written with this file contains a
+ 'long' type that may change widths
+ depending on your underlying
+ architecture.
+
+ size: As ASCII representation of the size of
+ the variable's value.
+ =============== ========================================
+
+
+ In addition, two other magic binary files are provided
+ in the top-level directory and are used for adding and
+ removing variables:
+
+ =============== ========================================
+ new_var: Takes a "struct efi_variable" and
+ instructs the EFI firmware to create a
+ new variable.
+
+ del_var: Takes a "struct efi_variable" and
+ instructs the EFI firmware to remove any
+ variable that has a matching vendor GUID
+ and variable key name.
+ =============== ========================================
diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-dump b/Documentation/ABI/stable/sysfs-firmware-opal-dump
new file mode 100644
index 000000000..1f74f4532
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-firmware-opal-dump
@@ -0,0 +1,46 @@
+What: /sys/firmware/opal/dump
+Date: Feb 2014
+Contact: Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+ This directory exposes interfaces for interacting with
+ the FSP and platform dumps through OPAL firmware interface.
+
+ This is only for the powerpc/powernv platform.
+
+ =============== ===============================================
+ initiate_dump: When '1' is written to it,
+ we will initiate a dump.
+ Read this file for supported commands.
+
+ 0xXX-0xYYYY: A directory for dump of type 0xXX and
+ id 0xYYYY (in hex). The name of this
+ directory should not be relied upon to
+ be in this format, only that it's unique
+ among all dumps. For determining the type
+ and ID of the dump, use the id and type files.
+ Do not rely on any particular size of dump
+ type or dump id.
+ =============== ===============================================
+
+ Each dump has the following files:
+
+ =============== ===============================================
+ id: An ASCII representation of the dump ID
+ in hex (e.g. '0x01')
+ type: An ASCII representation of the type of
+ dump in the format "0x%x %s" with the ID
+ in hex and a description of the dump type
+ (or 'unknown').
+ Type '0xffffffff unknown' is used when
+ we could not get the type from firmware.
+ e.g. '0x02 System/Platform Dump'
+ dump: A binary file containing the dump.
+ The size of the dump is the size of this file.
+ acknowledge: When 'ack' is written to this, we will
+ acknowledge that we've retrieved the
+ dump to the service processor. It will
+ then remove it, making the dump
+ inaccessible.
+ Reading this file will get a list of
+ supported actions.
+ =============== ===============================================
diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-elog b/Documentation/ABI/stable/sysfs-firmware-opal-elog
new file mode 100644
index 000000000..7c8a61a2d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-firmware-opal-elog
@@ -0,0 +1,62 @@
+What: /sys/firmware/opal/elog
+Date: Feb 2014
+Contact: Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+ This directory exposes error log entries retrieved
+ through the OPAL firmware interface.
+
+ Each error log is identified by a unique ID and will
+ exist until explicitly acknowledged to firmware.
+
+ Each log entry has a directory in /sys/firmware/opal/elog.
+
+ Log entries may be purged by the service processor
+ before retrieved by firmware or retrieved/acknowledged by
+ Linux if there is no room for more log entries.
+
+ In the event that Linux has retrieved the log entries
+ but not explicitly acknowledged them to firmware and
+ the service processor needs more room for log entries,
+ the only remaining copy of a log message may be in
+ Linux.
+
+ Typically, a user space daemon will monitor for new
+ entries, read them out and acknowledge them.
+
+ The service processor may be able to store more log
+ entries than firmware can, so after you acknowledge
+ an event from Linux you may instantly get another one
+ from the queue that was generated some time in the past.
+
+ The raw log format is a binary format. We currently
+ do not parse this at all in kernel, leaving it up to
+ user space to solve the problem. In future, we may
+ do more parsing in kernel and add more files to make
+ it easier for simple user space processes to extract
+ more information.
+
+ For each log entry (directory), there are the following
+ files:
+
+ ============== ================================================
+ id: An ASCII representation of the ID of the
+ error log, in hex - e.g. "0x01".
+
+ type: An ASCII representation of the type id and
+ description of the type of error log.
+ Currently just "0x00 PEL" - platform error log.
+ In the future there may be additional types.
+
+ raw: A read-only binary file that can be read
+ to get the raw log entry. These are
+ <16kb, often just hundreds of bytes and
+ "average" 2kb.
+
+ acknowledge: Writing 'ack' to this file will acknowledge
+ the error log to firmware (and in turn
+ the service processor, if applicable).
+ Shortly after acknowledging it, the log
+ entry will be removed from sysfs.
+ Reading this file will list the supported
+ operations (currently just acknowledge).
+ ============== ================================================
diff --git a/Documentation/ABI/stable/sysfs-fs-orangefs b/Documentation/ABI/stable/sysfs-fs-orangefs
new file mode 100644
index 000000000..affdb114b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-fs-orangefs
@@ -0,0 +1,87 @@
+What: /sys/fs/orangefs/perf_counters/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Counters and settings for various caches.
+ Read only.
+
+
+What: /sys/fs/orangefs/perf_counter_reset
+Date: June 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ echo a 0 or a 1 into perf_counter_reset to
+ reset all the counters in
+ /sys/fs/orangefs/perf_counters
+ except ones with PINT_PERF_PRESERVE set.
+
+
+What: /sys/fs/orangefs/perf_time_interval_secs
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Length of perf counter intervals in
+ seconds.
+
+
+What: /sys/fs/orangefs/perf_history_size
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ The perf_counters cache statistics have N, or
+ perf_history_size, samples. The default is
+ one.
+
+ Every perf_time_interval_secs the (first)
+ samples are reset.
+
+ If N is greater than one, the "current" set
+ of samples is reset, and the samples from the
+ other N-1 intervals remain available.
+
+
+What: /sys/fs/orangefs/op_timeout_secs
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Service operation timeout in seconds.
+
+
+What: /sys/fs/orangefs/slot_timeout_secs
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ "Slot" timeout in seconds. A "slot"
+ is an indexed buffer in the shared
+ memory segment used for communication
+ between the kernel module and userspace.
+ Slots are requested and waited for,
+ the wait times out after slot_timeout_secs.
+
+
+What: /sys/fs/orangefs/acache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Attribute cache configurable settings.
+
+
+What: /sys/fs/orangefs/ncache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Name cache configurable settings.
+
+
+What: /sys/fs/orangefs/capcache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Capability cache configurable settings.
+
+
+What: /sys/fs/orangefs/ccache/*
+Date: Jun 2015
+Contact: Mike Marshall <hubcap@omnibond.com>
+Description:
+ Credential cache configurable settings.
diff --git a/Documentation/ABI/stable/sysfs-hypervisor-xen b/Documentation/ABI/stable/sysfs-hypervisor-xen
new file mode 100644
index 000000000..748593c64
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-hypervisor-xen
@@ -0,0 +1,122 @@
+What: /sys/hypervisor/compilation/compile_date
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Contains the build time stamp of the Xen hypervisor
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/compilation/compiled_by
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Contains information who built the Xen hypervisor
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/compilation/compiler
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Compiler which was used to build the Xen hypervisor
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/properties/capabilities
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Space separated list of supported guest system types. Each type
+ is in the format: <class>-<major>.<minor>-<arch>
+ With:
+
+ ======== ============================================
+ <class>: "xen" -- x86: paravirtualized, arm: standard
+ "hvm" -- x86 only: fully virtualized
+ <major>: major guest interface version
+ <minor>: minor guest interface version
+ <arch>: architecture, e.g.:
+ "x86_32": 32 bit x86 guest without PAE
+ "x86_32p": 32 bit x86 guest with PAE
+ "x86_64": 64 bit x86 guest
+ "armv7l": 32 bit arm guest
+ "aarch64": 64 bit arm guest
+ ======== ============================================
+
+What: /sys/hypervisor/properties/changeset
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Changeset of the hypervisor (git commit)
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/properties/features
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Features the Xen hypervisor supports for the guest as defined
+ in include/xen/interface/features.h printed as a hex value.
+
+What: /sys/hypervisor/properties/pagesize
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Default page size of the hypervisor printed as a hex value.
+ Might return "0" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/properties/virtual_start
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Virtual address of the hypervisor as a hex value.
+
+What: /sys/hypervisor/type
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ Type of hypervisor:
+ "xen": Xen hypervisor
+
+What: /sys/hypervisor/uuid
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ UUID of the guest as known to the Xen hypervisor.
+
+What: /sys/hypervisor/version/extra
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ The Xen version is in the format <major>.<minor><extra>
+ This is the <extra> part of it.
+ Might return "<denied>" in case of special security settings
+ in the hypervisor.
+
+What: /sys/hypervisor/version/major
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ The Xen version is in the format <major>.<minor><extra>
+ This is the <major> part of it.
+
+What: /sys/hypervisor/version/minor
+Date: March 2009
+KernelVersion: 2.6.30
+Contact: xen-devel@lists.xenproject.org
+Description: If running under Xen:
+ The Xen version is in the format <major>.<minor><extra>
+ This is the <minor> part of it.
diff --git a/Documentation/ABI/stable/sysfs-kernel-notes b/Documentation/ABI/stable/sysfs-kernel-notes
new file mode 100644
index 000000000..2c76ee9e6
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-kernel-notes
@@ -0,0 +1,5 @@
+What: /sys/kernel/notes
+Date: July 2009
+Contact: <linux-kernel@vger.kernel.org>
+Description: The /sys/kernel/notes file contains the binary representation
+ of the running vmlinux's .notes section.
diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module
new file mode 100644
index 000000000..41b1f16e8
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-module
@@ -0,0 +1,47 @@
+The /sys/module tree consists of the following structure:
+
+What: /sys/module/<MODULENAME>
+Description:
+ The name of the module that is in the kernel. This
+ module name will always show up if the module is loaded as a
+ dynamic module. If it is built directly into the kernel, it
+ will only show up if it has a version or at least one
+ parameter.
+
+ Note: The conditions of creation in the built-in case are not
+ by design and may be removed in the future.
+
+What: /sys/module/<MODULENAME>/parameters
+Description:
+ This directory contains individual files that are each
+ individual parameters of the module that are able to be
+ changed at runtime. See the individual module
+ documentation as to the contents of these parameters and
+ what they accomplish.
+
+ Note: The individual parameter names and values are not
+ considered stable, only the fact that they will be
+ placed in this location within sysfs. See the
+ individual driver documentation for details as to the
+ stability of the different parameters.
+
+What: /sys/module/<MODULENAME>/refcnt
+Description:
+ If the module is able to be unloaded from the kernel, this file
+ will contain the current reference count of the module.
+
+ Note: If the module is built into the kernel, or if the
+ CONFIG_MODULE_UNLOAD kernel configuration value is not enabled,
+ this file will not be present.
+
+What: /sys/module/<MODULENAME>/srcversion
+Date: Jun 2005
+Description:
+ If the module source has MODULE_VERSION, this file will contain
+ the checksum of the source code.
+
+What: /sys/module/<MODULENAME>/version
+Date: Jun 2005
+Description:
+ If the module source has MODULE_VERSION, this file will contain
+ the version of the source code.
diff --git a/Documentation/ABI/stable/sysfs-transport-srp b/Documentation/ABI/stable/sysfs-transport-srp
new file mode 100644
index 000000000..ec7af69fe
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-transport-srp
@@ -0,0 +1,58 @@
+What: /sys/class/srp_remote_ports/port-<h>:<n>/delete
+Date: June 1, 2012
+KernelVersion: 3.7
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: Instructs an SRP initiator to disconnect from a target and to
+ remove all LUNs imported from that target.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/dev_loss_tmo
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: Number of seconds the SCSI layer will wait after a transport
+ layer error has been observed before removing a target port.
+ Zero means immediate removal. Setting this attribute to "off"
+ will disable the dev_loss timer.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/fast_io_fail_tmo
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: Number of seconds the SCSI layer will wait after a transport
+ layer error has been observed before failing I/O. Zero means
+ failing I/O immediately. Setting this attribute to "off" will
+ disable the fast_io_fail timer.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/port_id
+Date: June 27, 2007
+KernelVersion: 2.6.24
+Contact: linux-scsi@vger.kernel.org
+Description: 16-byte local SRP port identifier in hexadecimal format. An
+ example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/reconnect_delay
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: Number of seconds the SCSI layer will wait after a reconnect
+ attempt failed before retrying. Setting this attribute to
+ "off" will disable time-based reconnecting.
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/roles
+Date: June 27, 2007
+KernelVersion: 2.6.24
+Contact: linux-scsi@vger.kernel.org
+Description: Role of the remote port. Either "SRP Initiator" or "SRP Target".
+
+What: /sys/class/srp_remote_ports/port-<h>:<n>/state
+Date: February 1, 2014
+KernelVersion: 3.13
+Contact: linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description: State of the transport layer used for communication with the
+ remote port. "running" if the transport layer is operational;
+ "blocked" if a transport layer error has been encountered but
+ the fast_io_fail_tmo timer has not yet fired; "fail-fast"
+ after the fast_io_fail_tmo timer has fired and before the
+ "dev_loss_tmo" timer has fired; "lost" after the
+ "dev_loss_tmo" timer has fired and before the port is finally
+ removed.
diff --git a/Documentation/ABI/stable/thermal-notification b/Documentation/ABI/stable/thermal-notification
new file mode 100644
index 000000000..9723e8b7a
--- /dev/null
+++ b/Documentation/ABI/stable/thermal-notification
@@ -0,0 +1,4 @@
+What: A notification mechanism for thermal related events
+Description:
+ This interface enables notification for thermal related events.
+ The notification is in the form of a netlink event.
diff --git a/Documentation/ABI/stable/vdso b/Documentation/ABI/stable/vdso
new file mode 100644
index 000000000..951838d42
--- /dev/null
+++ b/Documentation/ABI/stable/vdso
@@ -0,0 +1,35 @@
+What: vDSO
+Date: July 2011
+KernelVersion: 3.0
+Contact: Andy Lutomirski <luto@kernel.org>
+Description:
+
+On some architectures, when the kernel loads any userspace program it
+maps an ELF DSO into that program's address space. This DSO is called
+the vDSO and it often contains useful and highly-optimized alternatives
+to real syscalls.
+
+These functions are called just like ordinary C function according to
+your platform's ABI. Call them from a sensible context. (For example,
+if you set CS on x86 to something strange, the vDSO functions are
+within their rights to crash.) In addition, if you pass a bad
+pointer to a vDSO function, you might get SIGSEGV instead of -EFAULT.
+
+To find the DSO, parse the auxiliary vector passed to the program's
+entry point. The AT_SYSINFO_EHDR entry will point to the vDSO.
+
+The vDSO uses symbol versioning; whenever you request a symbol from the
+vDSO, specify the version you are expecting.
+
+Programs that dynamically link to glibc will use the vDSO automatically.
+Otherwise, you can use the reference parser in
+tools/testing/selftests/vDSO/parse_vdso.c.
+
+Unless otherwise noted, the set of symbols with any given version and the
+ABI of those symbols is considered stable. It may vary across architectures,
+though.
+
+Note:
+ As of this writing, this ABI documentation as been confirmed for x86_64.
+ The maintainers of the other vDSO-using architectures should confirm
+ that it is correct for their architecture.