summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-dac-ltc268886
1 files changed, 86 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
new file mode 100644
index 000000000..1c3597127
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
@@ -0,0 +1,86 @@
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_en
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Dither enable. Write 1 to enable dither or 0 to disable it. This is useful
+ for changing the dither parameters. They way it should be done is:
+
+ - disable dither operation;
+ - change dither parameters (eg: frequency, phase...);
+ - enabled dither operation
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ This raw, unscaled value refers to the dither signal amplitude.
+ The same scale as in out_voltageY_raw applies. However, the
+ offset might be different as it's always 0 for this attribute.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw_available
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Available range for dither raw amplitude values.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_offset
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Offset applied to out_voltageY_dither_raw. Read only attribute
+ always set to 0.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Sets the dither signal frequency. Units are in Hz.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency_available
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Returns the available values for the dither frequency.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Sets the dither signal phase. Units are in Radians.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase_available
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Returns the available values for the dither phase.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Toggle enable. Write 1 to enable toggle or 0 to disable it. This is
+ useful when one wants to change the DAC output codes. The way it should
+ be done is:
+
+ - disable toggle operation;
+ - change out_voltageY_raw0 and out_voltageY_raw1;
+ - enable toggle operation.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ It has the same meaning as out_voltageY_raw. This attribute is
+ specific to toggle enabled channels and refers to the DAC output
+ code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset
+ as in out_voltageY_raw applies.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Performs a SW toggle. This attribute is specific to toggle
+ enabled channels and allows to toggle between out_voltageY_raw0
+ and out_voltageY_raw1 through software. Writing 0 will select
+ out_voltageY_raw0 while 1 selects out_voltageY_raw1.