diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm/tegra')
9 files changed, 905 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt new file mode 100644 index 000000000..5ae601e7f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,nvec.txt @@ -0,0 +1,21 @@ +NVIDIA compliant embedded controller + +Required properties: +- compatible : should be "nvidia,nvec". +- reg : the iomem of the i2c slave controller +- interrupts : the interrupt line of the i2c slave controller +- clock-frequency : the frequency of the i2c bus +- gpios : the gpio used for ec request +- slave-addr: the i2c address of the slave controller +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + Tegra20/Tegra30: + - div-clk + - fast-clk + Tegra114: + - div-clk +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - i2c diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml new file mode 100644 index 000000000..711bb4d08 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra-ccplex-cluster.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra CPU COMPLEX CLUSTER area device tree bindings + +maintainers: + - Sumit Gupta <sumitg@nvidia.com> + - Mikko Perttunen <mperttunen@nvidia.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: |+ + The Tegra CPU COMPLEX CLUSTER area contains memory-mapped + registers that initiate CPU frequency/voltage transitions. + +properties: + $nodename: + pattern: "ccplex@([0-9a-f]+)$" + + compatible: + enum: + - nvidia,tegra186-ccplex-cluster + - nvidia,tegra234-ccplex-cluster + + reg: + maxItems: 1 + + nvidia,bpmp: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Specifies the BPMP node that needs to be queried to get + operating point data for all CPUs. + +additionalProperties: false + +required: + - compatible + - reg + - nvidia,bpmp + +examples: + - | + ccplex@e000000 { + compatible = "nvidia,tegra234-ccplex-cluster"; + reg = <0x0e000000 0x5ffff>; + nvidia,bpmp = <&bpmp>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml new file mode 100644 index 000000000..0faa403f6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra186-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Power Management Controller (PMC) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra186-pmc + - nvidia,tegra194-pmc + - nvidia,tegra234-pmc + + reg: + minItems: 4 + maxItems: 5 + + reg-names: + minItems: 4 + items: + - const: pmc + - const: wake + - const: aotag + - const: scratch + - const: misc + + interrupt-controller: true + + "#interrupt-cells": + description: Specifies the number of cells needed to encode an + interrupt source. The value must be 2. + const: 2 + + nvidia,invert-interrupt: + description: If present, inverts the PMU interrupt signal. + $ref: /schemas/types.yaml#/definitions/flag + +if: + properties: + compatible: + contains: + const: nvidia,tegra186-pmc +then: + properties: + reg: + maxItems: 4 + + reg-names: + maxItems: 4 +else: + properties: + reg: + minItems: 5 + + reg-names: + minItems: 5 + +patternProperties: + "^[a-z0-9]+-[a-z0-9]+$": + if: + type: object + then: + description: | + These are pad configuration nodes. On Tegra SoCs a pad is a set of + pins which are configured as a group. The pin grouping is a fixed + attribute of the hardware. The PMC can be used to set pad power + state and signaling voltage. A pad can be either in active or + power down mode. The support for power state and signaling voltage + configuration varies depending on the pad in question. 3.3 V and + 1.8 V signaling voltages are supported on pins where software + controllable signaling voltage switching is available. + + Pad configurations are described with pin configuration nodes + which are placed under the pmc node and they are referred to by + the pinctrl client properties. For more information see + + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + + The following pads are present on Tegra186: + + csia, csib, dsi, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2, + pex-clk1, usb0, usb1, usb2, usb-bias, uart, audio, hsic, dbg, + hdmi-dp0, hdmi-dp1, pex-cntrl, sdmmc2-hv, sdmmc4, cam, dsib, + dsic, dsid, csic, csid, csie, dsif, spi, ufs, dmic-hv, edp, + sdmmc1-hv, sdmmc3-hv, conn, audio-hv, ao-hv + + The following pads are present on Tegra194: + + csia, csib, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2, + pex-clk1, eqos, pex-clk-2-bias, pex-clk-2, dap3, dap5, uart, + pwr-ctl, soc-gpio53, audio, gp-pwm2, gp-pwm3, soc-gpio12, + soc-gpio13, soc-gpio10, uart4, uart5, dbg, hdmi-dp3, hdmi-dp2, + hdmi-dp0, hdmi-dp1, pex-cntrl, pex-ctl2, pex-l0-rst, + pex-l1-rst, sdmmc4, pex-l5-rst, cam, csic, csid, csie, csif, + spi, ufs, csig, csih, edp, sdmmc1-hv, sdmmc3-hv, conn, + audio-hv, ao-hv + + properties: + pins: + $ref: /schemas/types.yaml#/definitions/string + description: Must contain the name of the pad(s) to be + configured. + + low-power-enable: + description: Configure the pad into power down mode. + $ref: /schemas/types.yaml#/definitions/flag + + low-power-disable: + description: Configure the pad into active mode. + $ref: /schemas/types.yaml#/definitions/flag + + power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signalling + voltages. + + The values are defined in + + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h + + The power state can be configured on all of the above pads + except for ao-hv. Following pads have software configurable + signaling voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, + audio-hv, ao-hv. + + phandle: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +dependencies: + interrupt-controller: ['#interrupt-cells'] + "#interrupt-cells": + required: + - interrupt-controller + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> + #include <dt-bindings/memory/tegra186-mc.h> + #include <dt-bindings/reset/tegra186-reset.h> + + pmc@c3600000 { + compatible = "nvidia,tegra186-pmc"; + reg = <0x0c360000 0x10000>, + <0x0c370000 0x10000>, + <0x0c380000 0x10000>, + <0x0c390000 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch"; + nvidia,invert-interrupt; + + sdmmc1_3v3: sdmmc1-3v3 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>; + }; + + sdmmc1_1v8: sdmmc1-1v8 { + pins = "sdmmc1-hv"; + power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; + }; + }; + + sdmmc1: mmc@3400000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x03400000 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA186_CLK_SDMMC1>, + <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>; + clock-names = "sdhci", "tmclk"; + resets = <&bpmp TEGRA186_RESET_SDMMC1>; + reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu TEGRA186_SID_SDMMC1>; + pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; + pinctrl-0 = <&sdmmc1_3v3>; + pinctrl-1 = <&sdmmc1_1v8>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml new file mode 100644 index 000000000..788a13f8a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra194 AXI2APB bridge + +maintainers: + - Sumit Gupta <sumitg@nvidia.com> + +properties: + $nodename: + pattern: "^axi2apb@([0-9a-f]+)$" + + compatible: + enum: + - nvidia,tegra194-axi2apb + + reg: + maxItems: 6 + description: Physical base address and length of registers for all bridges + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + axi2apb: axi2apb@2390000 { + compatible = "nvidia,tegra194-axi2apb"; + reg = <0x02390000 0x1000>, + <0x023a0000 0x1000>, + <0x023b0000 0x1000>, + <0x023c0000 0x1000>, + <0x023d0000 0x1000>, + <0x023e0000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml new file mode 100644 index 000000000..debb2b0c8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra194 CBB 1.0 bindings + +maintainers: + - Sumit Gupta <sumitg@nvidia.com> + +description: |+ + The Control Backbone (CBB) is comprised of the physical path from an + initiator to a target's register configuration space. CBB 1.0 has + multiple hierarchical sub-NOCs (Network-on-Chip) and connects various + initiators and targets using different bridges like AXIP2P, AXI2APB. + + This driver handles errors due to illegal register accesses reported + by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs + "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC" + which is the main NOC. + + By default, the access issuing initiator is informed about the error + using SError or Data Abort exception unless the ERD (Error Response + Disable) is enabled/set for that initiator. If the ERD is enabled, then + SError or Data Abort is masked and the error is reported with interrupt. + + - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the + errors due to illegal accesses from CCPLEX are reported by interrupts. + If ERD is not set, then error is reported by SError. + - For other initiators, the ERD is disabled. So, the access issuing + initiator is informed about the illegal access by Data Abort exception. + In addition, an interrupt is also generated to CCPLEX. These initiators + include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and + engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder + engine) etc which can initiate transactions. + + The driver prints relevant debug information like Error Code, Error + Description, Master, Address, AXI ID, Cache, Protection, Security Group + etc on receiving error notification. + +properties: + $nodename: + pattern: "^[a-z]+-noc@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra194-cbb-noc + - nvidia,tegra194-aon-noc + - nvidia,tegra194-bpmp-noc + - nvidia,tegra194-rce-noc + - nvidia,tegra194-sce-noc + + reg: + maxItems: 1 + + interrupts: + description: + CCPLEX receives secure or nonsecure interrupt depending on error type. + A secure interrupt is received for SEC(firewall) & SLV errors and a + non-secure interrupt is received for TMO & DEC errors. + items: + - description: non-secure interrupt + - description: secure interrupt + + nvidia,axi2apb: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: + Specifies the node having all axi2apb bridges which need to be checked + for any error logged in their status register. + + nvidia,apbmisc: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: + Specifies the apbmisc node which need to be used for reading the ERD + register. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - nvidia,apbmisc + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cbb-noc@2300000 { + compatible = "nvidia,tegra194-cbb-noc"; + reg = <0x02300000 0x1000>; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + nvidia,axi2apb = <&axi2apb>; + nvidia,apbmisc = <&apbmisc>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt new file mode 100644 index 000000000..9a4295b54 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt @@ -0,0 +1,17 @@ +NVIDIA Tegra AHB + +Required properties: +- compatible : For Tegra20, must contain "nvidia,tegra20-ahb". For + Tegra30, must contain "nvidia,tegra30-ahb". Otherwise, must contain + '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124, + tegra132, or tegra210. +- reg : Should contain 1 register ranges(address and length). For + Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004 + 0x10c>. For Tegra124, Tegra132 and Tegra210 chips, the value should + be be <0x6000c000 0x150>. + +Example (for a Tegra20 chip): + ahb: ahb@6000c004 { + compatible = "nvidia,tegra20-ahb"; + reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt new file mode 100644 index 000000000..a855c1bff --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt @@ -0,0 +1,18 @@ +NVIDIA Tegra Flow Controller + +Required properties: +- compatible: Should contain one of the following: + - "nvidia,tegra20-flowctrl": for Tegra20 + - "nvidia,tegra30-flowctrl": for Tegra30 + - "nvidia,tegra114-flowctrl": for Tegra114 + - "nvidia,tegra124-flowctrl": for Tegra124 + - "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl": for Tegra132 + - "nvidia,tegra210-flowctrl": for Tegra210 +- reg: Should contain one register range (address and length) + +Example: + + flow-controller@60007000 { + compatible = "nvidia,tegra20-flowctrl"; + reg = <0x60007000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml new file mode 100644 index 000000000..7fd8d47b1 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml @@ -0,0 +1,389 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tegra Power Management Controller (PMC) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jonathan Hunter <jonathanh@nvidia.com> + +properties: + compatible: + enum: + - nvidia,tegra20-pmc + - nvidia,tegra30-pmc + - nvidia,tegra114-pmc + - nvidia,tegra124-pmc + - nvidia,tegra210-pmc + + reg: + maxItems: 1 + description: + Offset and length of the register set for the device. + + clock-names: + items: + - const: pclk + - const: clk32k_in + description: + Must includes entries pclk and clk32k_in. + pclk is the Tegra clock of that name and clk32k_in is 32KHz clock + input to Tegra. + + clocks: + maxItems: 2 + description: + Must contain an entry for each entry in clock-names. + See ../clocks/clocks-bindings.txt for details. + + '#clock-cells': + const: 1 + description: + Tegra PMC has clk_out_1, clk_out_2, and clk_out_3. + PMC also has blink control which allows 32Khz clock output to + Tegra blink pad. + Consumer of PMC clock should specify the desired clock by having + the clock ID in its "clocks" phandle cell with pmc clock provider. + See include/dt-bindings/soc/tegra-pmc.h for the list of Tegra PMC + clock IDs. + + '#interrupt-cells': + const: 2 + description: + Specifies number of cells needed to encode an interrupt source. + The value must be 2. + + interrupt-controller: true + + nvidia,invert-interrupt: + $ref: /schemas/types.yaml#/definitions/flag + description: Inverts the PMU interrupt signal. + The PMU is an external Power Management Unit, whose interrupt output + signal is fed into the PMC. This signal is optionally inverted, and + then fed into the ARM GIC. The PMC is not involved in the detection + or handling of this interrupt signal, merely its inversion. + + nvidia,core-power-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: Core power request active-high. + + nvidia,sys-clock-req-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: System clock request active-high. + + nvidia,combined-power-req: + $ref: /schemas/types.yaml#/definitions/flag + description: combined power request for CPU and Core. + + nvidia,cpu-pwr-good-en: + $ref: /schemas/types.yaml#/definitions/flag + description: + CPU power good signal from external PMIC to PMC is enabled. + + nvidia,suspend-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + The suspend mode that the platform should use. + Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh + Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh + Mode 2 is for LP2, CPU voltage off + + nvidia,cpu-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power good time in uSec. + + nvidia,cpu-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: CPU power off time in uSec. + + nvidia,core-pwr-good-time: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + <Oscillator-stable-time Power-stable-time> + Core power good time in uSec. + + nvidia,core-pwr-off-time: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Core power off time in uSec. + + nvidia,lp0-vec: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + <start length> Starting address and length of LP0 vector. + The LP0 vector contains the warm boot code that is executed + by AVP when resuming from the LP0 state. + The AVP (Audio-Video Processor) is an ARM7 processor and + always being the first boot processor when chip is power on + or resume from deep sleep mode. When the system is resumed + from the deep sleep mode, the warm boot code will restore + some PLLs, clocks and then brings up CPU0 for resuming the + system. + + i2c-thermtrip: + type: object + description: + On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists, + hardware-triggered thermal reset will be enabled. + + properties: + nvidia,i2c-controller-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + ID of I2C controller to send poweroff command to PMU. + Valid values are described in section 9.2.148 + "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference + Manual. + + nvidia,bus-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Bus address of the PMU on the I2C bus. + + nvidia,reg-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: PMU I2C register address to issue poweroff command. + + nvidia,reg-data: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Poweroff command to write to PMU. + + nvidia,pinmux-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Pinmux used by the hardware when issuing Poweroff command. + Defaults to 0. Valid values are described in section 12.5.2 + "Pinmux Support" of the Tegra4 Technical Reference Manual. + + required: + - nvidia,i2c-controller-id + - nvidia,bus-addr + - nvidia,reg-addr + - nvidia,reg-data + + additionalProperties: false + + powergates: + type: object + description: | + This node contains a hierarchy of power domain nodes, which should + match the powergates on the Tegra SoC. Each powergate node + represents a power-domain on the Tegra SoC that can be power-gated + by the Tegra PMC. + Hardware blocks belonging to a power domain should contain + "power-domains" property that is a phandle pointing to corresponding + powergate node. + The name of the powergate node should be one of the below. Note that + not every powergate is applicable to all Tegra devices and the following + list shows which powergates are applicable to which devices. + Please refer to Tegra TRM for mode details on the powergate nodes to + use for each power-gate block inside Tegra. + Name Description Devices Applicable + 3d 3D Graphics Tegra20/114/124/210 + 3d0 3D Graphics 0 Tegra30 + 3d1 3D Graphics 1 Tegra30 + aud Audio Tegra210 + dfd Debug Tegra210 + dis Display A Tegra114/124/210 + disb Display B Tegra114/124/210 + heg 2D Graphics Tegra30/114/124/210 + iram Internal RAM Tegra124/210 + mpe MPEG Encode All + nvdec NVIDIA Video Decode Engine Tegra210 + nvjpg NVIDIA JPEG Engine Tegra210 + pcie PCIE Tegra20/30/124/210 + sata SATA Tegra30/124/210 + sor Display interfaces Tegra124/210 + ve2 Video Encode Engine 2 Tegra210 + venc Video Encode Engine All + vdec Video Decode Engine Tegra20/30/114/124 + vic Video Imaging Compositor Tegra124/210 + xusba USB Partition A Tegra114/124/210 + xusbb USB Partition B Tegra114/124/210 + xusbc USB Partition C Tegra114/124/210 + + patternProperties: + "^[a-z0-9]+$": + type: object + + properties: + clocks: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each clock required by the PMC + for controlling a power-gate. + See ../clocks/clock-bindings.txt document for more details. + + resets: + minItems: 1 + maxItems: 8 + description: + Must contain an entry for each reset required by the PMC + for controlling a power-gate. + See ../reset/reset.txt for more details. + + '#power-domain-cells': + const: 0 + description: Must be 0. + + required: + - clocks + - resets + - '#power-domain-cells' + + additionalProperties: false + +patternProperties: + "^[a-f0-9]+-[a-f0-9]+$": + type: object + description: + This is a Pad configuration node. On Tegra SOCs a pad is a set of + pins which are configured as a group. The pin grouping is a fixed + attribute of the hardware. The PMC can be used to set pad power state + and signaling voltage. A pad can be either in active or power down mode. + The support for power state and signaling voltage configuration varies + depending on the pad in question. 3.3V and 1.8V signaling voltages + are supported on pins where software controllable signaling voltage + switching is available. + + The pad configuration state nodes are placed under the pmc node and they + are referred to by the pinctrl client properties. For more information + see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt. + The pad name should be used as the value of the pins property in pin + configuration nodes. + + The following pads are present on Tegra124 and Tegra132 + audio, bb, cam, comp, csia, csb, cse, dsi, dsib, dsic, dsid, hdmi, hsic, + hv, lvds, mipi-bias, nand, pex-bias, pex-clk1, pex-clk2, pex-cntrl, + sdmmc1, sdmmc3, sdmmc4, sys_ddc, uart, usb0, usb1, usb2, usb_bias. + + The following pads are present on Tegra210 + audio, audio-hv, cam, csia, csib, csic, csid, csie, csif, dbg, + debug-nonao, dmic, dp, dsi, dsib, dsic, dsid, emmc, emmc2, gpio, hdmi, + hsic, lvds, mipi-bias, pex-bias, pex-clk1, pex-clk2, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, uart, usb0, usb1, usb2, usb3, usb-bias. + + properties: + pins: + $ref: /schemas/types.yaml#/definitions/string + description: Must contain name of the pad(s) to be configured. + + low-power-enable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into power down mode. + + low-power-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: Configure the pad into active mode. + + power-source: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or + TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages. + The values are defined in + include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h. + Power state can be configured on all Tegra124 and Tegra132 + pads. None of the Tegra124 or Tegra132 pads support signaling + voltage switching. + All of the listed Tegra210 pads except pex-cntrl support power + state configuration. Signaling voltage switching is supported + on below Tegra210 pads. + audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1, + sdmmc3, spi, spi-hv, and uart. + + required: + - pins + + additionalProperties: false + + core-domain: + type: object + description: | + The vast majority of hardware blocks of Tegra SoC belong to a + Core power domain, which has a dedicated voltage rail that powers + the blocks. + + properties: + operating-points-v2: + description: + Should contain level, voltages and opp-supported-hw property. + The supported-hw is a bitfield indicating SoC speedo or process + ID mask. + + "#power-domain-cells": + const: 0 + + required: + - operating-points-v2 + - "#power-domain-cells" + + additionalProperties: false + + core-supply: + description: + Phandle to voltage regulator connected to the SoC Core power rail. + +required: + - compatible + - reg + - clock-names + - clocks + - '#clock-cells' + +additionalProperties: false + +dependencies: + "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] + "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"] + "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"] + +examples: + - | + + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h> + #include <dt-bindings/soc/tegra-pmc.h> + + tegra_pmc: pmc@7000e400 { + compatible = "nvidia,tegra210-pmc"; + reg = <0x7000e400 0x400>; + core-supply = <®ulator>; + clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + #clock-cells = <1>; + + nvidia,invert-interrupt; + nvidia,suspend-mode = <0>; + nvidia,cpu-pwr-good-time = <0>; + nvidia,cpu-pwr-off-time = <0>; + nvidia,core-pwr-good-time = <4587 3876>; + nvidia,core-pwr-off-time = <39065>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + pd_core: core-domain { + operating-points-v2 = <&core_opp_table>; + #power-domain-cells = <0>; + }; + + powergates { + pd_audio: aud { + clocks = <&tegra_car TEGRA210_CLK_APE>, + <&tegra_car TEGRA210_CLK_APB2APE>; + resets = <&tegra_car 198>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + + pd_xusbss: xusba { + clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; + resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; + power-domains = <&pd_core>; + #power-domain-cells = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml new file mode 100644 index 000000000..7b1fe50ff --- /dev/null +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NVIDIA Tegra CBB 2.0 bindings + +maintainers: + - Sumit Gupta <sumitg@nvidia.com> + +description: |+ + The Control Backbone (CBB) is comprised of the physical path from an + initiator to a target's register configuration space. CBB 2.0 consists + of multiple sub-blocks connected to each other to create a topology. + The Tegra234 SoC has different fabrics based on CBB 2.0 architecture + which include cluster fabrics BPMP, AON, PSC, SCE, RCE, DCE, FSI and + "CBB central fabric". + + In CBB 2.0, each initiator which can issue transactions connects to a + Root Master Node (MN) before it connects to any other element of the + fabric. Each Root MN contains a Error Monitor (EM) which detects and + logs error. Interrupts from various EM blocks are collated by Error + Notifier (EN) which is per fabric and presents a single interrupt from + fabric to the SoC interrupt controller. + + The driver handles errors from CBB due to illegal register accesses + and prints debug information about failed transaction on receiving + the interrupt from EN. Debug information includes Error Code, Error + Description, MasterID, Fabric, SlaveID, Address, Cache, Protection, + Security Group etc on receiving error notification. + + If the Error Response Disable (ERD) is set/enabled for an initiator, + then SError or Data abort exception error response is masked and an + interrupt is used for reporting errors due to illegal accesses from + that initiator. The value returned on read failures is '0xFFFFFFFF' + for compatibility with PCIE. + +properties: + $nodename: + pattern: "^[a-z]+-fabric@[0-9a-f]+$" + + compatible: + enum: + - nvidia,tegra234-aon-fabric + - nvidia,tegra234-bpmp-fabric + - nvidia,tegra234-cbb-fabric + - nvidia,tegra234-dce-fabric + - nvidia,tegra234-rce-fabric + - nvidia,tegra234-sce-fabric + + reg: + maxItems: 1 + + interrupts: + items: + - description: secure interrupt from error notifier + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + cbb-fabric@1300000 { + compatible = "nvidia,tegra234-cbb-fabric"; + reg = <0x13a00000 0x400000>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + }; |