summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/ata/sata-common.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/ata/sata-common.yaml')
-rw-r--r--Documentation/devicetree/bindings/ata/sata-common.yaml57
1 files changed, 57 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
new file mode 100644
index 000000000..58c9342b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/sata-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial AT attachment (SATA) controllers
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ This document defines device tree properties common to most Serial
+ AT attachment (SATA) storage devices. It doesn't constitute a device tree
+ binding specification by itself but is meant to be referenced by device
+ tree bindings.
+
+ The SATA controller-specific device tree bindings are responsible for
+ defining whether each property is required or optional.
+
+properties:
+ $nodename:
+ pattern: "^sata(@.*)?$"
+ description:
+ Specifies the host controller node. SATA host controller nodes are named
+ "sata"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ dma-coherent: true
+
+patternProperties:
+ "^sata-port@[0-9a-e]$":
+ $ref: '#/$defs/sata-port'
+ description: |
+ DT nodes for ports connected on the SATA host. The SATA port
+ nodes will be named "sata-port".
+
+additionalProperties: true
+
+$defs:
+ sata-port:
+ type: object
+
+ properties:
+ reg:
+ minimum: 0
+ description:
+ The ID number of the SATA port. Aside with being directly used,
+ each port can have a Port Multiplier attached thus allowing to
+ access more than one drive by means of a single SATA port.
+
+...