summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/counter
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/counter')
-rw-r--r--Documentation/devicetree/bindings/counter/ftm-quaddec.txt18
-rw-r--r--Documentation/devicetree/bindings/counter/interrupt-counter.yaml62
-rw-r--r--Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml61
-rw-r--r--Documentation/devicetree/bindings/counter/ti-eqep.yaml50
4 files changed, 191 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/counter/ftm-quaddec.txt b/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
new file mode 100644
index 000000000..4d18cd722
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ftm-quaddec.txt
@@ -0,0 +1,18 @@
+FlexTimer Quadrature decoder counter
+
+This driver exposes a simple counter for the quadrature decoder mode.
+
+Required properties:
+- compatible: Must be "fsl,ftm-quaddec".
+- reg: Must be set to the memory region of the flextimer.
+
+Optional property:
+- big-endian: Access the device registers in big-endian mode.
+
+Example:
+ counter0: counter@29d0000 {
+ compatible = "fsl,ftm-quaddec";
+ reg = <0x0 0x29d0000 0x0 0x10000>;
+ big-endian;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/counter/interrupt-counter.yaml b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
new file mode 100644
index 000000000..fd075d104
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/interrupt-counter.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/interrupt-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt counter
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+ A generic interrupt counter to measure interrupt frequency. It was developed
+ and used for agricultural devices to measure rotation speed of wheels or
+ other tools. Since the direction of rotation is not important, only one
+ signal line is needed.
+ Interrupts or gpios are required. If both are defined, the interrupt will
+ take precedence for counting interrupts.
+
+properties:
+ compatible:
+ const: interrupt-counter
+
+ interrupts:
+ maxItems: 1
+
+ gpios:
+ maxItems: 1
+
+required:
+ - compatible
+
+anyOf:
+ - required: [ interrupts-extended ]
+ - required: [ interrupts ]
+ - required: [ gpios ]
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ counter-0 {
+ compatible = "interrupt-counter";
+ interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ counter-1 {
+ compatible = "interrupt-counter";
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ counter-2 {
+ compatible = "interrupt-counter";
+ interrupts-extended = <&gpio 2 IRQ_TYPE_EDGE_RISING>;
+ gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
new file mode 100644
index 000000000..4e0b2d2b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+ - Julien Panis <jpanis@baylibre.com>
+
+description: |
+ The eCAP module resources can be used to capture timestamps
+ on input signal events (falling/rising edges).
+
+properties:
+ compatible:
+ const: ti,am62-ecap-capture
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: fck
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ capture@23100000 { /* eCAP in capture mode on am62x */
+ compatible = "ti,am62-ecap-capture";
+ reg = <0x00 0x23100000 0x00 0x100>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 51 0>;
+ clock-names = "fck";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/counter/ti-eqep.yaml b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
new file mode 100644
index 000000000..85f1ff83a
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti-eqep.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti-eqep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Quadrature Encoder Pulse (eQEP) Module
+
+maintainers:
+ - David Lechner <david@lechnology.com>
+
+properties:
+ compatible:
+ const: ti,am3352-eqep
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: The eQEP event interrupt
+ maxItems: 1
+
+ clocks:
+ description: The clock that determines the SYSCLKOUT rate for the eQEP
+ peripheral.
+ maxItems: 1
+
+ clock-names:
+ const: sysclkout
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ eqep0: counter@180 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x180 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "sysclkout";
+ interrupts = <79>;
+ };
+
+...