summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/dma
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/dma')
-rw-r--r--Documentation/devicetree/bindings/dma/adi,axi-dmac.txt61
-rw-r--r--Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml55
-rw-r--r--Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml95
-rw-r--r--Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml62
-rw-r--r--Documentation/devicetree/bindings/dma/altr,msgdma.yaml63
-rw-r--r--Documentation/devicetree/bindings/dma/apm-xgene-dma.txt47
-rw-r--r--Documentation/devicetree/bindings/dma/apple,admac.yaml87
-rw-r--r--Documentation/devicetree/bindings/dma/arm,pl330.yaml92
-rw-r--r--Documentation/devicetree/bindings/dma/arm-pl08x.yaml140
-rw-r--r--Documentation/devicetree/bindings/dma/atmel-dma.txt42
-rw-r--r--Documentation/devicetree/bindings/dma/atmel-xdma.txt53
-rw-r--r--Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt83
-rw-r--r--Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt29
-rw-r--r--Documentation/devicetree/bindings/dma/dma-common.yaml53
-rw-r--r--Documentation/devicetree/bindings/dma/dma-controller.yaml37
-rw-r--r--Documentation/devicetree/bindings/dma/dma-router.yaml54
-rw-r--r--Documentation/devicetree/bindings/dma/dma.txt1
-rw-r--r--Documentation/devicetree/bindings/dma/fsl,edma.yaml155
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-dma.txt50
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt118
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt60
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-qdma.txt58
-rw-r--r--Documentation/devicetree/bindings/dma/img-mdc-dma.txt57
-rw-r--r--Documentation/devicetree/bindings/dma/ingenic,dma.yaml98
-rw-r--r--Documentation/devicetree/bindings/dma/intel,ldma.yaml116
-rw-r--r--Documentation/devicetree/bindings/dma/k3dma.txt47
-rw-r--r--Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt54
-rw-r--r--Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml124
-rw-r--r--Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt32
-rw-r--r--Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt24
-rw-r--r--Documentation/devicetree/bindings/dma/mmp-dma.txt81
-rw-r--r--Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt45
-rw-r--r--Documentation/devicetree/bindings/dma/mpc512x-dma.txt29
-rw-r--r--Documentation/devicetree/bindings/dma/mtk-hsdma.txt33
-rw-r--r--Documentation/devicetree/bindings/dma/mv-xor-v2.txt28
-rw-r--r--Documentation/devicetree/bindings/dma/mv-xor.txt40
-rw-r--r--Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml112
-rw-r--r--Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt44
-rw-r--r--Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml101
-rw-r--r--Documentation/devicetree/bindings/dma/owl-dma.yaml80
-rw-r--r--Documentation/devicetree/bindings/dma/qcom,adm.yaml99
-rw-r--r--Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml100
-rw-r--r--Documentation/devicetree/bindings/dma/qcom,gpi.yaml95
-rw-r--r--Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt95
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,nbpfaxi.txt69
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml174
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml132
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml51
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml104
-rw-r--r--Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml74
-rw-r--r--Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml185
-rw-r--r--Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml134
-rw-r--r--Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml63
-rw-r--r--Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml62
-rw-r--r--Documentation/devicetree/bindings/dma/sprd-dma.txt44
-rw-r--r--Documentation/devicetree/bindings/dma/st,stm32-dma.yaml116
-rw-r--r--Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml53
-rw-r--r--Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml106
-rw-r--r--Documentation/devicetree/bindings/dma/st_fdma.txt86
-rw-r--r--Documentation/devicetree/bindings/dma/stericsson,dma40.yaml159
-rw-r--r--Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt68
-rw-r--r--Documentation/devicetree/bindings/dma/ti-edma.txt238
-rw-r--r--Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml167
-rw-r--r--Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml175
-rw-r--r--Documentation/devicetree/bindings/dma/ti/k3-udma.yaml186
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt128
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml85
-rw-r--r--Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml68
68 files changed, 5756 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
new file mode 100644
index 000000000..cd17684aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/adi,axi-dmac.txt
@@ -0,0 +1,61 @@
+Analog Devices AXI-DMAC DMA controller
+
+Required properties:
+ - compatible: Must be "adi,axi-dmac-1.00.a".
+ - reg: Specification for the controllers memory mapped register map.
+ - interrupts: Specification for the controllers interrupt.
+ - clocks: Phandle and specifier to the controllers AXI interface clock
+ - #dma-cells: Must be 1.
+
+Required sub-nodes:
+ - adi,channels: This sub-node must contain a sub-node for each DMA channel. For
+ the channel sub-nodes the following bindings apply. They must match the
+ configuration options of the peripheral as it was instantiated.
+
+Required properties for adi,channels sub-node:
+ - #size-cells: Must be 0
+ - #address-cells: Must be 1
+
+Required channel sub-node properties:
+ - reg: Which channel this node refers to.
+ - adi,source-bus-width,
+ adi,destination-bus-width: Width of the source or destination bus in bits.
+ - adi,source-bus-type,
+ adi,destination-bus-type: Type of the source or destination bus. Must be one
+ of the following:
+ 0 (AXI_DMAC_TYPE_AXI_MM): Memory mapped AXI interface
+ 1 (AXI_DMAC_TYPE_AXI_STREAM): Streaming AXI interface
+ 2 (AXI_DMAC_TYPE_AXI_FIFO): FIFO interface
+
+Deprecated optional channel properties:
+ - adi,length-width: Width of the DMA transfer length register.
+ - adi,cyclic: Must be set if the channel supports hardware cyclic DMA
+ transfers.
+ - adi,2d: Must be set if the channel supports hardware 2D DMA transfers.
+
+DMA clients connected to the AXI-DMAC DMA controller must use the format
+described in the dma.txt file using a one-cell specifier. The value of the
+specifier refers to the DMA channel index.
+
+Example:
+
+dma: dma@7c420000 {
+ compatible = "adi,axi-dmac-1.00.a";
+ reg = <0x7c420000 0x10000>;
+ interrupts = <0 57 0>;
+ clocks = <&clkc 16>;
+ #dma-cells = <1>;
+
+ adi,channels {
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ dma-channel@0 {
+ reg = <0>;
+ adi,source-bus-width = <32>;
+ adi,source-bus-type = <ADI_AXI_DMAC_TYPE_MM_AXI>;
+ adi,destination-bus-width = <64>;
+ adi,destination-bus-type = <ADI_AXI_DMAC_TYPE_FIFO>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
new file mode 100644
index 000000000..26d0d8ab7
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun4i-a10-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 DMA Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 2
+ description:
+ The first cell is either 0 or 1, the former to use the normal
+ DMA, 1 for dedicated DMA. The second cell is the request line
+ number.
+
+ compatible:
+ const: allwinner,sun4i-a10-dma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - "#dma-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun4i-a10-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <27>;
+ clocks = <&ahb_gates 6>;
+ #dma-cells = <2>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
new file mode 100644
index 000000000..bd599bda2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun50i-a64-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 DMA Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 1
+ description: The cell is the request line number.
+
+ compatible:
+ oneOf:
+ - enum:
+ - allwinner,sun20i-d1-dma
+ - allwinner,sun50i-a64-dma
+ - allwinner,sun50i-a100-dma
+ - allwinner,sun50i-h6-dma
+ - items:
+ - const: allwinner,sun8i-r40-dma
+ - const: allwinner,sun50i-a64-dma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mbus
+
+ resets:
+ maxItems: 1
+
+required:
+ - "#dma-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+ - dma-channels
+
+if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun20i-d1-dma
+ - allwinner,sun50i-a100-dma
+ - allwinner,sun50i-h6-dma
+
+then:
+ properties:
+ clocks:
+ minItems: 2
+
+ required:
+ - clock-names
+
+else:
+ properties:
+ clocks:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun50i-a64-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <0 50 4>;
+ clocks = <&ccu 30>;
+ dma-channels = <8>;
+ dma-requests = <27>;
+ resets = <&ccu 7>;
+ #dma-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
new file mode 100644
index 000000000..344dc7e04
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/allwinner,sun6i-a31-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 DMA Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 1
+ description: The cell is the request line number.
+
+ compatible:
+ enum:
+ - allwinner,sun6i-a31-dma
+ - allwinner,sun8i-a23-dma
+ - allwinner,sun8i-a83t-dma
+ - allwinner,sun8i-h3-dma
+ - allwinner,sun8i-v3s-dma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - "#dma-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun6i-a31-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <0 50 4>;
+ clocks = <&ahb1_gates 6>;
+ resets = <&ahb1_rst 6>;
+ #dma-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
new file mode 100644
index 000000000..b53ac7631
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/altr,msgdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera mSGDMA IP core
+
+maintainers:
+ - Olivier Dautricourt <olivierdautricourt@gmail.com>
+
+description: |
+ Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA)
+ intellectual property (IP)
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ const: altr,socfpga-msgdma
+
+ reg:
+ items:
+ - description: Control and Status Register Slave Port
+ - description: Descriptor Slave Port
+ - description: Response Slave Port (Optional)
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: csr
+ - const: desc
+ - const: resp
+ minItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ "#dma-cells":
+ const: 1
+ description:
+ The cell identifies the channel id (must be 0)
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ msgdma_controller: dma-controller@ff200b00 {
+ compatible = "altr,socfpga-msgdma";
+ reg = <0xff200b00 0x100>, <0xff200c00 0x100>, <0xff200d00 0x100>;
+ reg-names = "csr", "desc", "resp";
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
new file mode 100644
index 000000000..c53e0b080
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt
@@ -0,0 +1,47 @@
+Applied Micro X-Gene SoC DMA nodes
+
+DMA nodes are defined to describe on-chip DMA interfaces in
+APM X-Gene SoC.
+
+Required properties for DMA interfaces:
+- compatible: Should be "apm,xgene-dma".
+- device_type: set to "dma".
+- reg: Address and length of the register set for the device.
+ It contains the information of registers in the following order:
+ 1st - DMA control and status register address space.
+ 2nd - Descriptor ring control and status register address space.
+ 3rd - Descriptor ring command register address space.
+ 4th - Soc efuse register address space.
+- interrupts: DMA has 5 interrupts sources. 1st interrupt is
+ DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts
+ are completion interrupts for each DMA channels.
+- clocks: Reference to the clock entry.
+
+Optional properties:
+- dma-coherent : Present if dma operations are coherent
+
+Example:
+ dmaclk: dmaclk@1f27c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f27c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "dmaclk";
+ };
+
+ dma: dma@1f270000 {
+ compatible = "apm,xgene-storm-dma";
+ device_type = "dma";
+ reg = <0x0 0x1f270000 0x0 0x10000>,
+ <0x0 0x1f200000 0x0 0x10000>,
+ <0x0 0x1b000000 0x0 0x400000>,
+ <0x0 0x1054a000 0x0 0x100>;
+ interrupts = <0x0 0x82 0x4>,
+ <0x0 0xb8 0x4>,
+ <0x0 0xb9 0x4>,
+ <0x0 0xba 0x4>,
+ <0x0 0xbb 0x4>;
+ dma-coherent;
+ clocks = <&dmaclk 0>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/apple,admac.yaml b/Documentation/devicetree/bindings/dma/apple,admac.yaml
new file mode 100644
index 000000000..3b1e667f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apple,admac.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/apple,admac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Audio DMA Controller (ADMAC)
+
+description: |
+ Apple's Audio DMA Controller (ADMAC) is used to fetch and store audio samples
+ on SoCs from the "Apple Silicon" family.
+
+ The controller has been seen with up to 24 channels. Even-numbered channels
+ are TX-only, odd-numbered are RX-only. Individual channels are coupled to
+ fixed device endpoints.
+
+maintainers:
+ - Martin PoviĊĦer <povik+lin@cutebit.org>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apple,t6000-admac
+ - apple,t8103-admac
+ - const: apple,admac
+
+ reg:
+ maxItems: 1
+
+ '#dma-cells':
+ const: 1
+ description:
+ Clients specify a single cell with channel number.
+
+ dma-channels:
+ maximum: 24
+
+ interrupts:
+ minItems: 4
+ maxItems: 4
+ description:
+ Interrupts that correspond to the 4 IRQ outputs of the controller. Usually
+ only one of the controller outputs will be connected as an usable interrupt
+ source. The remaining interrupts will be left without a valid value, e.g.
+ in an interrupts-extended list the disconnected positions will contain
+ an empty phandle reference <0>.
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - '#dma-cells'
+ - dma-channels
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/apple-aic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ aic: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ admac: dma-controller@238200000 {
+ compatible = "apple,t8103-admac", "apple,admac";
+ reg = <0x38200000 0x34000>;
+ dma-channels = <24>;
+ interrupts-extended = <0>,
+ <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+ <0>,
+ <0>;
+ #dma-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/arm,pl330.yaml b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
new file mode 100644
index 000000000..4a3dd6f53
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm,pl330.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell PL330 DMA Controller
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description:
+ The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+ between memory and peripherals or memory to memory.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,pl330
+ required:
+ - compatible
+
+allOf:
+ - $ref: dma-controller.yaml#
+ - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - arm,pl330
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 32
+ description: A single combined interrupt or an interrupt per event
+
+ '#dma-cells':
+ const: 1
+ description: Contains the DMA request number for the consumer
+
+ arm,pl330-broken-no-flushp:
+ type: boolean
+ description: quirk for avoiding to execute DMAFLUSHP
+
+ arm,pl330-periph-burst:
+ type: boolean
+ description: quirk for performing burst transfer only
+
+ dma-coherent: true
+
+ iommus:
+ minItems: 1
+ maxItems: 9
+ description: Up to 1 IOMMU entry per DMA channel for writes and 1
+ IOMMU entry for reads.
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ items:
+ - const: dma
+ - const: dma-ocp
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ dma-controller@12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <99>;
+ #dma-cells = <1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
new file mode 100644
index 000000000..9193b18fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm-pl08x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCells PL080 and PL081 and derivatives DMA controller
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+ - $ref: "dma-controller.yaml#"
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,pl080
+ - arm,pl081
+ required:
+ - compatible
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - arm,pl080
+ - arm,pl081
+ - const: arm,primecell
+ - items:
+ - const: faraday,ftdma020
+ - const: arm,pl080
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+ description: Address range of the PL08x registers
+
+ interrupts:
+ minItems: 1
+ description: The PL08x interrupt number
+
+ clocks:
+ minItems: 1
+ description: The clock running the IP core clock
+
+ clock-names:
+ maxItems: 1
+
+ lli-bus-interface-ahb1:
+ type: boolean
+ description: if AHB master 1 is eligible for fetching LLIs
+
+ lli-bus-interface-ahb2:
+ type: boolean
+ description: if AHB master 2 is eligible for fetching LLIs
+
+ mem-bus-interface-ahb1:
+ type: boolean
+ description: if AHB master 1 is eligible for fetching memory contents
+
+ mem-bus-interface-ahb2:
+ type: boolean
+ description: if AHB master 2 is eligible for fetching memory contents
+
+ memcpy-burst-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 1
+ - 4
+ - 8
+ - 16
+ - 32
+ - 64
+ - 128
+ - 256
+ description: the size of the bursts for memcpy
+
+ memcpy-bus-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 8
+ - 16
+ - 32
+ - 64
+ description: bus width used for memcpy in bits. FTDMAC020 also accept 64 bits
+
+ resets:
+ maxItems: 1
+
+required:
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - "#dma-cells"
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ dmac0: dma-controller@10130000 {
+ compatible = "arm,pl080", "arm,primecell";
+ reg = <0x10130000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <15>;
+ clocks = <&hclkdma0>;
+ clock-names = "apb_pclk";
+ lli-bus-interface-ahb1;
+ lli-bus-interface-ahb2;
+ mem-bus-interface-ahb2;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ #dma-cells = <2>;
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/reset/cortina,gemini-reset.h>
+ #include <dt-bindings/clock/cortina,gemini-clock.h>
+ dma-controller@67000000 {
+ compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
+ /* Faraday Technology FTDMAC020 variant */
+ arm,primecell-periphid = <0x0003b080>;
+ reg = <0x67000000 0x1000>;
+ interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+ resets = <&syscon GEMINI_RESET_DMAC>;
+ clocks = <&syscon GEMINI_CLK_AHB>;
+ clock-names = "apb_pclk";
+ /* Bus interface AHB1 (AHB0) is totally tilted */
+ lli-bus-interface-ahb2;
+ mem-bus-interface-ahb2;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+ #dma-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
new file mode 100644
index 000000000..f69bcf5a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -0,0 +1,42 @@
+* Atmel Direct Memory Access Controller (DMA)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <2>, used to represent the number of integer cells in
+the dmas property of client devices.
+
+Example:
+
+dma0: dma@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21>;
+ #dma-cells = <2>;
+};
+
+DMA clients connected to the Atmel DMA controller must use the format
+described in the dma.txt file, using a three-cell specifier for each channel:
+a phandle plus two integer cells.
+The three cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The memory interface (16 most significant bits), the peripheral interface
+(16 less significant bits).
+3. Parameters for the at91 DMA configuration register which are device
+dependent:
+ - bit 7-0: peripheral identifier for the hardware handshaking interface. The
+ identifier can be different for tx and rx.
+ - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 2 for ASAP.
+
+Example:
+
+i2c0@i2c@f8010000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf8010000 0x100>;
+ interrupts = <9 4 6>;
+ dmas = <&dma0 1 7>,
+ <&dma0 1 8>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
new file mode 100644
index 000000000..510b7f25b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
@@ -0,0 +1,53 @@
+* Atmel Extensible Direct Memory Access Controller (XDMAC)
+
+* XDMA Controller
+Required properties:
+- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or
+ "microchip,sama7g5-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <1>, used to represent the number of integer cells in
+the dmas property of client devices.
+ - The 1st cell specifies the channel configuration register:
+ - bit 13: SIF, source interface identifier, used to get the memory
+ interface identifier,
+ - bit 14: DIF, destination interface identifier, used to get the peripheral
+ interface identifier,
+ - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+dma1: dma-controller@f0004000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xf0004000 0x200>;
+ interrupts = <50 4 0>;
+ #dma-cells = <1>;
+};
+
+
+* DMA clients
+DMA clients connected to the Atmel XDMA controller must use the format
+described in the dma.txt file, using a one-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. Channel configuration register. Configurable fields are:
+ - bit 13: SIF, source interface identifier, used to get the memory
+ interface identifier,
+ - bit 14: DIF, destination interface identifier, used to get the peripheral
+ interface identifier,
+ - bit 30-24: PERID, peripheral identifier.
+
+Example:
+
+i2c2: i2c@f8024000 {
+ compatible = "atmel,at91sam9x5-i2c";
+ reg = <0xf8024000 0x4000>;
+ interrupts = <34 4 6>;
+ dmas = <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(6))>,
+ <&dma1
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
new file mode 100644
index 000000000..b6a8cc097
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt
@@ -0,0 +1,83 @@
+* BCM2835 DMA controller
+
+The BCM2835 DMA controller has 16 channels in total.
+Only the lower 13 channels have an associated IRQ.
+Some arbitrary channels are used by the firmware
+(1,3,6,7 in the current firmware version).
+The channels 0,2 and 3 have special functionality
+and should not be used by the driver.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain the DMA interrupts associated
+ to the DMA channels in ascending order.
+- interrupt-names: Should contain the names of the interrupt
+ in the form "dmaXX".
+ Use "dma-shared-all" for the common interrupt line
+ that is shared by all dma channels.
+- #dma-cells: Must be <1>, the cell in the dmas property of the
+ client device represents the DREQ number.
+- brcm,dma-channel-mask: Bit mask representing the channels
+ not used by the firmware in ascending order,
+ i.e. first channel corresponds to LSB.
+
+Example:
+
+dma: dma@7e007000 {
+ compatible = "brcm,bcm2835-dma";
+ reg = <0x7e007000 0xf00>;
+ interrupts = <1 16>,
+ <1 17>,
+ <1 18>,
+ <1 19>,
+ <1 20>,
+ <1 21>,
+ <1 22>,
+ <1 23>,
+ <1 24>,
+ <1 25>,
+ <1 26>,
+ /* dma channel 11-14 share one irq */
+ <1 27>,
+ <1 27>,
+ <1 27>,
+ <1 27>,
+ /* unused shared irq for all channels */
+ <1 28>;
+ interrupt-names = "dma0",
+ "dma1",
+ "dma2",
+ "dma3",
+ "dma4",
+ "dma5",
+ "dma6",
+ "dma7",
+ "dma8",
+ "dma9",
+ "dma10",
+ "dma11",
+ "dma12",
+ "dma13",
+ "dma14",
+ "dma-shared-all";
+
+ #dma-cells = <1>;
+ brcm,dma-channel-mask = <0x7f35>;
+};
+
+
+DMA clients connected to the BCM2835 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each channel.
+
+Example:
+
+bcm2835_i2s: i2s@7e203000 {
+ compatible = "brcm,bcm2835-i2s";
+ reg = < 0x7e203000 0x24>;
+ clocks = <&clocks BCM2835_CLOCK_PCM>;
+
+ dmas = <&dma 2>,
+ <&dma 3>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
new file mode 100644
index 000000000..092913a28
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
@@ -0,0 +1,29 @@
+* Broadcom SBA RAID engine
+
+Required properties:
+- compatible: Should be one of the following
+ "brcm,iproc-sba"
+ "brcm,iproc-sba-v2"
+ The "brcm,iproc-sba" has support for only 6 PQ coefficients
+ The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
+- mboxes: List of phandle and mailbox channel specifiers
+
+Example:
+
+raid_mbox: mbox@67400000 {
+ ...
+ #mbox-cells = <3>;
+ ...
+};
+
+raid0 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 0 0x1 0xffff>,
+ <&raid_mbox 1 0x1 0xffff>,
+ <&raid_mbox 2 0x1 0xffff>,
+ <&raid_mbox 3 0x1 0xffff>,
+ <&raid_mbox 4 0x1 0xffff>,
+ <&raid_mbox 5 0x1 0xffff>,
+ <&raid_mbox 6 0x1 0xffff>,
+ <&raid_mbox 7 0x1 0xffff>;
+};
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
new file mode 100644
index 000000000..ad06d36af
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/dma-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA Engine Generic Binding
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description:
+ Generic binding to provide a way for a driver using DMA Engine to
+ retrieve the DMA request or channel information that goes from a
+ hardware device to a DMA controller.
+
+select: false
+
+properties:
+ "#dma-cells":
+ minimum: 1
+ # Should be enough
+ maximum: 255
+ description:
+ Used to provide DMA controller specific information.
+
+ dma-channel-mask:
+ description:
+ Bitmask of available DMA channels in ascending order that are
+ not reserved by firmware and are available to the
+ kernel. i.e. first channel corresponds to LSB.
+ The first item in the array is for channels 0-31, the second is for
+ channels 32-63, etc.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+
+ dma-channels:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of DMA channels supported by the controller.
+
+ dma-requests:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Number of DMA request signals supported by the controller.
+
+required:
+ - "#dma-cells"
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml
new file mode 100644
index 000000000..6d3727267
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/dma-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA Controller Generic Binding
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+ - $ref: "dma-common.yaml#"
+
+# Everything else is described in the common file
+properties:
+ $nodename:
+ pattern: "^dma-controller(@.*)?$"
+
+additionalProperties: true
+
+examples:
+ - |
+ dma: dma-controller@48000000 {
+ compatible = "ti,omap-sdma";
+ reg = <0x48000000 0x1000>;
+ interrupts = <0 12 0x4>,
+ <0 13 0x4>,
+ <0 14 0x4>,
+ <0 15 0x4>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <127>;
+ dma-channel-mask = <0xfffe>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
new file mode 100644
index 000000000..4b817f5dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/dma-router.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DMA Router Generic Binding
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+ - $ref: "dma-common.yaml#"
+
+description:
+ DMA routers are transparent IP blocks used to route DMA request
+ lines from devices to the DMA controller. Some SoCs (like TI DRA7x)
+ have more peripherals integrated with DMA requests than what the DMA
+ controller can handle directly.
+
+properties:
+ $nodename:
+ pattern: "^dma-router(@.*)?$"
+
+ dma-masters:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ Array of phandles to the DMA controllers the router can direct
+ the signal to.
+
+ dma-requests:
+ description:
+ Number of incoming request lines the router can handle.
+
+required:
+ - "#dma-cells"
+ - dma-masters
+
+additionalProperties: true
+
+examples:
+ - |
+ sdma_xbar: dma-router@4a002b78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0x4a002b78 0xfc>;
+ #dma-cells = <1>;
+ dma-requests = <205>;
+ ti,dma-safe-map = <0>;
+ dma-masters = <&sdma>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/dma.txt b/Documentation/devicetree/bindings/dma/dma.txt
new file mode 100644
index 000000000..90a67a016
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/dma.txt
@@ -0,0 +1 @@
+This file has been moved to dma-controller.yaml.
diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
new file mode 100644
index 000000000..050e6cd57
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale enhanced Direct Memory Access(eDMA) Controller
+
+description: |
+ The eDMA channels have multiplex capability by programmable
+ memory-mapped registers. channels are split into two groups, called
+ DMAMUX0 and DMAMUX1, specific DMA request source can only be multiplexed
+ by any channel of certain group, DMAMUX0 or DMAMUX1, but not both.
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,vf610-edma
+ - fsl,imx7ulp-edma
+ - items:
+ - const: fsl,ls1028a-edma
+ - const: fsl,vf610-edma
+
+ reg:
+ minItems: 2
+ maxItems: 3
+
+ interrupts:
+ minItems: 2
+ maxItems: 17
+
+ interrupt-names:
+ minItems: 2
+ maxItems: 17
+
+ "#dma-cells":
+ const: 2
+
+ dma-channels:
+ const: 32
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ maxItems: 2
+
+ big-endian:
+ description: |
+ If present registers and hardware scatter/gather descriptors of the
+ eDMA are implemented in big endian mode, otherwise in little mode.
+ type: boolean
+
+required:
+ - "#dma-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - dma-channels
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,vf610-edma
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: dmamux0
+ - const: dmamux1
+ interrupts:
+ maxItems: 2
+ interrupt-names:
+ items:
+ - const: edma-tx
+ - const: edma-err
+ reg:
+ maxItems: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx7ulp-edma
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: dma
+ - const: dmamux0
+ interrupts:
+ maxItems: 17
+ reg:
+ maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/vf610-clock.h>
+
+ edma0: dma-controller@40018000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40018000 0x2000>,
+ <0x40024000 0x1000>,
+ <0x40025000 0x1000>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>;
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx7ulp-clock.h>
+
+ edma1: dma-controller@40080000 {
+ #dma-cells = <2>;
+ compatible = "fsl,imx7ulp-edma";
+ reg = <0x40080000 0x2000>,
+ <0x40210000 0x1000>;
+ dma-channels = <32>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ /* last is eDMA2-ERR interrupt */
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dma", "dmamux0";
+ clocks = <&pcc2 IMX7ULP_CLK_DMA1>, <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
new file mode 100644
index 000000000..1c9929d53
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
@@ -0,0 +1,50 @@
+* Freescale Direct Memory Access (DMA) Controller for i.MX
+
+This document will only describe differences to the generic DMA Controller and
+DMA request bindings as described in dma/dma.txt .
+
+* DMA controller
+
+Required properties:
+- compatible : Should be "fsl,<chip>-dma". chip can be imx1, imx21 or imx27
+- reg : Should contain DMA registers location and length
+- interrupts : First item should be DMA interrupt, second one is optional and
+ should contain DMA Error interrupt
+- #dma-cells : Has to be 1. imx-dma does not support anything else.
+
+Optional properties:
+- dma-channels : Number of DMA channels supported. Should be 16.
+- #dma-channels : deprecated
+- dma-requests : Number of DMA requests supported.
+- #dma-requests : deprecated
+
+Example:
+
+ dma: dma@10001000 {
+ compatible = "fsl,imx27-dma";
+ reg = <0x10001000 0x1000>;
+ interrupts = <32 33>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+
+* DMA client
+
+Clients have to specify the DMA requests with phandles in a list.
+
+Required properties:
+- dmas: List of one or more DMA request specifiers. One DMA request specifier
+ consists of a phandle to the DMA controller followed by the integer
+ specifying the request line.
+- dma-names: List of string identifiers for the DMA requests. For the correct
+ names, have a look at the specific client driver.
+
+Example:
+
+ sdhci1: sdhci@10013000 {
+ ...
+ dmas = <&dma 7>;
+ dma-names = "rx-tx";
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
new file mode 100644
index 000000000..12c316ff4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
@@ -0,0 +1,118 @@
+* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+Required properties:
+- compatible : Should be one of
+ "fsl,imx25-sdma"
+ "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
+ "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
+ "fsl,imx51-sdma"
+ "fsl,imx53-sdma"
+ "fsl,imx6q-sdma"
+ "fsl,imx7d-sdma"
+ "fsl,imx6ul-sdma"
+ "fsl,imx8mq-sdma"
+ "fsl,imx8mm-sdma"
+ "fsl,imx8mn-sdma"
+ "fsl,imx8mp-sdma"
+ The -to variants should be preferred since they allow to determine the
+ correct ROM script addresses needed for the driver to work without additional
+ firmware.
+- reg : Should contain SDMA registers location and length
+- interrupts : Should contain SDMA interrupt
+- #dma-cells : Must be <3>.
+ The first cell specifies the DMA request/event ID. See details below
+ about the second and third cell.
+- fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
+ scripts firmware
+
+The second cell of dma phandle specifies the peripheral type of DMA transfer.
+The full ID of peripheral types can be found below.
+
+ ID transfer type
+ ---------------------
+ 0 MCU domain SSI
+ 1 Shared SSI
+ 2 MMC
+ 3 SDHC
+ 4 MCU domain UART
+ 5 Shared UART
+ 6 FIRI
+ 7 MCU domain CSPI
+ 8 Shared CSPI
+ 9 SIM
+ 10 ATA
+ 11 CCM
+ 12 External peripheral
+ 13 Memory Stick Host Controller
+ 14 Shared Memory Stick Host Controller
+ 15 DSP
+ 16 Memory
+ 17 FIFO type Memory
+ 18 SPDIF
+ 19 IPU Memory
+ 20 ASRC
+ 21 ESAI
+ 22 SSI Dual FIFO (needs firmware ver >= 2)
+ 23 Shared ASRC
+ 24 SAI
+
+The third cell specifies the transfer priority as below.
+
+ ID transfer priority
+ -------------------------
+ 0 High
+ 1 Medium
+ 2 Low
+
+Optional properties:
+
+- gpr : The phandle to the General Purpose Register (GPR) node.
+- fsl,sdma-event-remap : Register bits of sdma event remap, the format is
+ <reg shift val>.
+ reg is the GPR register offset.
+ shift is the bit position inside the GPR register.
+ val is the value of the bit (0 or 1).
+
+Examples:
+
+sdma@83fb0000 {
+ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+ reg = <0x83fb0000 0x4000>;
+ interrupts = <6>;
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "sdma-imx51.bin";
+};
+
+DMA clients connected to the i.MX SDMA controller must use the format
+described in the dma.txt file.
+
+Examples:
+
+ssi2: ssi@70014000 {
+ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+ reg = <0x70014000 0x4000>;
+ interrupts = <30>;
+ clocks = <&clks 49>;
+ dmas = <&sdma 24 1 0>,
+ <&sdma 25 1 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <15>;
+};
+
+Using the fsl,sdma-event-remap property:
+
+If we want to use SDMA on the SAI1 port on a MX6SX:
+
+&sdma {
+ gpr = <&gpr>;
+ /* SDMA events remap for SAI1_RX and SAI1_TX */
+ fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
+};
+
+The fsl,sdma-event-remap property in this case has two values:
+- <0 15 1> means that the offset is 0, so GPR0 is the register of the
+SDMA remap. Bit 15 of GPR0 selects between UART4_RX and SAI1_RX.
+Setting bit 15 to 1 selects SAI1_RX.
+- <0 16 1> means that the offset is 0, so GPR0 is the register of the
+SDMA remap. Bit 16 of GPR0 selects between UART4_TX and SAI1_TX.
+Setting bit 16 to 1 selects SAI1_TX.
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
new file mode 100644
index 000000000..e30e184f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -0,0 +1,60 @@
+* Freescale MXS DMA
+
+Required properties:
+- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
+- reg : Should contain registers location and length
+- interrupts : Should contain the interrupt numbers of DMA channels.
+ If a channel is empty/reserved, 0 should be filled in place.
+- #dma-cells : Must be <1>. The number cell specifies the channel ID.
+- dma-channels : Number of channels supported by the DMA controller
+
+Optional properties:
+- interrupt-names : Name of DMA channel interrupts
+
+Supported chips:
+imx23, imx28.
+
+Examples:
+
+dma_apbh: dma-apbh@80004000 {
+ compatible = "fsl,imx28-dma-apbh";
+ reg = <0x80004000 0x2000>;
+ interrupts = <82 83 84 85
+ 88 88 88 88
+ 88 88 88 88
+ 87 86 0 0>;
+ interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+ "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+ "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+ "hsadc", "lcdif", "empty", "empty";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+};
+
+dma_apbx: dma-apbx@80024000 {
+ compatible = "fsl,imx28-dma-apbx";
+ reg = <0x80024000 0x2000>;
+ interrupts = <78 79 66 0
+ 80 81 68 69
+ 70 71 72 73
+ 74 75 76 77>;
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
+ "saif0", "saif1", "i2c0", "i2c1",
+ "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+ "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+};
+
+DMA clients connected to the MXS DMA controller must use the format
+described in the dma.txt file.
+
+Examples:
+
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
new file mode 100644
index 000000000..da371c4d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
@@ -0,0 +1,58 @@
+NXP Layerscape SoC qDMA Controller
+==================================
+
+This device follows the generic DMA bindings defined in dma/dma.txt.
+
+Required properties:
+
+- compatible: Must be one of
+ "fsl,ls1021a-qdma": for LS1021A Board
+ "fsl,ls1028a-qdma": for LS1028A Board
+ "fsl,ls1043a-qdma": for ls1043A Board
+ "fsl,ls1046a-qdma": for ls1046A Board
+- reg: Should contain the register's base address and length.
+- interrupts: Should contain a reference to the interrupt used by this
+ device.
+- interrupt-names: Should contain interrupt names:
+ "qdma-queue0": the block0 interrupt
+ "qdma-queue1": the block1 interrupt
+ "qdma-queue2": the block2 interrupt
+ "qdma-queue3": the block3 interrupt
+ "qdma-error": the error interrupt
+- fsl,dma-queues: Should contain number of queues supported.
+- dma-channels: Number of DMA channels supported
+- block-number: the virtual block number
+- block-offset: the offset of different virtual block
+- status-sizes: status queue size of per virtual block
+- queue-sizes: command queue size of per virtual block, the size number
+ based on queues
+
+Optional properties:
+
+- dma-channels: Number of DMA channels supported by the controller.
+- big-endian: If present registers and hardware scatter/gather descriptors
+ of the qDMA are implemented in big endian mode, otherwise in little
+ mode.
+
+Examples:
+
+ qdma: dma-controller@8390000 {
+ compatible = "fsl,ls1021a-qdma";
+ reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8389000 0x0 0x1000>, /* Status regs */
+ <0x0 0x838a000 0x0 0x2000>; /* Block regs */
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error",
+ "qdma-queue0", "qdma-queue1";
+ dma-channels = <8>;
+ block-number = <2>;
+ block-offset = <0x1000>;
+ fsl,dma-queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ big-endian;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/img-mdc-dma.txt b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
new file mode 100644
index 000000000..28c1341db
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/img-mdc-dma.txt
@@ -0,0 +1,57 @@
+* IMG Multi-threaded DMA Controller (MDC)
+
+Required properties:
+- compatible: Must be "img,pistachio-mdc-dma".
+- reg: Must contain the base address and length of the MDC registers.
+- interrupts: Must contain all the per-channel DMA interrupts.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clock/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - sys: MDC system interface clock.
+- img,cr-periph: Must contain a phandle to the peripheral control syscon
+ node which contains the DMA request to channel mapping registers.
+- img,max-burst-multiplier: Must be the maximum supported burst size multiplier.
+ The maximum burst size is this value multiplied by the hardware-reported bus
+ width.
+- #dma-cells: Must be 3:
+ - The first cell is the peripheral's DMA request line.
+ - The second cell is a bitmap specifying to which channels the DMA request
+ line may be mapped (i.e. bit N set indicates channel N is usable).
+ - The third cell is the thread ID to be used by the channel.
+
+Optional properties:
+- dma-channels: Number of supported DMA channels, up to 32. If not specified
+ the number reported by the hardware is used.
+
+Example:
+
+mdc: dma-controller@18143000 {
+ compatible = "img,pistachio-mdc-dma";
+ reg = <0x18143000 0x1000>;
+ interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&system_clk>;
+ clock-names = "sys";
+
+ img,max-burst-multiplier = <16>;
+ img,cr-periph = <&cr_periph>;
+
+ #dma-cells = <3>;
+};
+
+spi@18100f00 {
+ ...
+ dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+ dma-names = "tx", "rx";
+ ...
+};
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
new file mode 100644
index 000000000..3b0b3b919
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs DMA Controller DT bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-dma
+ - ingenic,jz4725b-dma
+ - ingenic,jz4760-dma
+ - ingenic,jz4760-bdma
+ - ingenic,jz4760-mdma
+ - ingenic,jz4760b-dma
+ - ingenic,jz4760b-bdma
+ - ingenic,jz4760b-mdma
+ - ingenic,jz4770-dma
+ - ingenic,jz4780-dma
+ - ingenic,x1000-dma
+ - ingenic,x1830-dma
+ - items:
+ - const: ingenic,jz4770-bdma
+ - const: ingenic,jz4760b-bdma
+
+ reg:
+ items:
+ - description: Channel-specific registers
+ - description: System control registers
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ "#dma-cells":
+ enum: [2, 3]
+ description: >
+ DMA clients must use the format described in dma.txt, giving a phandle
+ to the DMA controller plus the following integer cells:
+
+ - Request type: The DMA request type specifies the device endpoint that
+ will be the source or destination of the DMA transfer.
+ If "#dma-cells" is 2, the request type is a single cell, and the
+ direction will be unidirectional (either RX or TX but not both).
+ If "#dma-cells" is 3, the request type has two cells; the first
+ one corresponds to the host to device direction (TX), the second one
+ corresponds to the device to host direction (RX). The DMA channel is
+ then bidirectional.
+
+ - Channel: If set to 0xffffffff, any available channel will be allocated
+ for the client. Otherwise, the exact channel specified will be used.
+ The channel should be reserved on the DMA controller using the
+ ingenic,reserved-channels property.
+
+ ingenic,reserved-channels:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ Bitmask of channels to reserve for devices that need a specific
+ channel. These channels will only be assigned when explicitely
+ requested by a client. The primary use for this is channels 0 and
+ 1, which can be configured to have special behaviour for NAND/BCH
+ when using programmable firmware.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+ dma: dma-controller@13420000 {
+ compatible = "ingenic,jz4780-dma";
+ reg = <0x13420000 0x400>, <0x13421000 0x40>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <10>;
+
+ clocks = <&cgu JZ4780_CLK_PDMA>;
+
+ #dma-cells = <2>;
+
+ ingenic,reserved-channels = <0x3>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
new file mode 100644
index 000000000..a5c4be783
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/intel,ldma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lightning Mountain centralized DMA controllers.
+
+maintainers:
+ - chuanhua.lei@intel.com
+ - mallikarjunax.reddy@intel.com
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - intel,lgm-cdma
+ - intel,lgm-dma2tx
+ - intel,lgm-dma1rx
+ - intel,lgm-dma1tx
+ - intel,lgm-dma0tx
+ - intel,lgm-dma3
+ - intel,lgm-toe-dma30
+ - intel,lgm-toe-dma31
+
+ reg:
+ maxItems: 1
+
+ "#dma-cells":
+ const: 3
+ description:
+ The first cell is the peripheral's DMA request line.
+ The second cell is the peripheral's (port) number corresponding to the channel.
+ The third cell is the burst length of the channel.
+
+ dma-channels:
+ minimum: 1
+ maximum: 16
+
+ dma-channel-mask:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: ctrl
+
+ interrupts:
+ maxItems: 1
+
+ intel,dma-poll-cnt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ DMA descriptor polling counter is used to control the poling mechanism
+ for the descriptor fetching for all channels.
+
+ intel,dma-byte-en:
+ type: boolean
+ description:
+ DMA byte enable is only valid for DMA write(RX).
+ Byte enable(1) means DMA write will be based on the number of dwords
+ instead of the whole burst.
+
+ intel,dma-drb:
+ type: boolean
+ description:
+ DMA descriptor read back to make sure data and desc synchronization.
+
+ intel,dma-dburst-wr:
+ type: boolean
+ description:
+ Enable RX dynamic burst write. When it is enabled, the DMA does RX dynamic burst;
+ if it is disabled, the DMA RX will still support programmable fixed burst size of 2,4,8,16.
+ It only applies to RX DMA and memcopy DMA.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ dma0: dma-controller@e0e00000 {
+ compatible = "intel,lgm-cdma";
+ reg = <0xe0e00000 0x1000>;
+ #dma-cells = <3>;
+ dma-channels = <16>;
+ dma-channel-mask = <0xFFFF>;
+ interrupt-parent = <&ioapic1>;
+ interrupts = <82 1>;
+ resets = <&rcu0 0x30 0>;
+ reset-names = "ctrl";
+ clocks = <&cgu0 80>;
+ intel,dma-poll-cnt = <4>;
+ intel,dma-byte-en;
+ intel,dma-drb;
+ };
+ - |
+ dma3: dma-controller@ec800000 {
+ compatible = "intel,lgm-dma3";
+ reg = <0xec800000 0x1000>;
+ clocks = <&cgu0 71>;
+ resets = <&rcu0 0x10 9>;
+ #dma-cells = <3>;
+ intel,dma-poll-cnt = <16>;
+ intel,dma-byte-en;
+ intel,dma-dburst-wr;
+ };
diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
new file mode 100644
index 000000000..10a2f15b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/k3dma.txt
@@ -0,0 +1,47 @@
+* Hisilicon K3 DMA controller
+
+See dma.txt first
+
+Required properties:
+- compatible: Must be one of
+- "hisilicon,k3-dma-1.0"
+- "hisilicon,hisi-pcm-asp-dma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: see dma.txt, should be 1, para number
+- dma-channels: physical channels supported
+- dma-requests: virtual channels supported, each virtual channel
+ have specific request line
+- clocks: clock required
+
+Example:
+
+Controller:
+ dma0: dma@fcd02000 {
+ compatible = "hisilicon,k3-dma-1.0";
+ reg = <0xfcd02000 0x1000>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ dma-requests = <27>;
+ interrupts = <0 12 4>;
+ clocks = <&pclk>;
+ };
+
+Client:
+Use specific request line passing from dmax
+For example, i2c0 read channel request line is 18, while write channel use 19
+
+ i2c0: i2c@fcb08000 {
+ compatible = "snps,designware-i2c";
+ dmas = <&dma0 18 /* read channel */
+ &dma0 19>; /* write channel */
+ dma-names = "rx", "tx";
+ };
+
+ i2c1: i2c@fcb09000 {
+ compatible = "snps,designware-i2c";
+ dmas = <&dma0 20 /* read channel */
+ &dma0 21>; /* write channel */
+ dma-names = "rx", "tx";
+ };
+
diff --git a/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt b/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
new file mode 100644
index 000000000..87740adb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/lpc1850-dmamux.txt
@@ -0,0 +1,54 @@
+NXP LPC18xx/43xx DMA MUX (DMA request router)
+
+Required properties:
+- compatible: "nxp,lpc1850-dmamux"
+- reg: Memory map for accessing module
+- #dma-cells: Should be set to <3>.
+ * 1st cell contain the master dma request signal
+ * 2nd cell contain the mux value (0-3) for the peripheral
+ * 3rd cell contain either 1 or 2 depending on the AHB
+ master used.
+- dma-requests: Number of DMA requests for the mux
+- dma-masters: phandle pointing to the DMA controller
+
+The DMA controller node need to have the following poroperties:
+- dma-requests: Number of DMA requests the controller can handle
+
+Example:
+
+dmac: dma@40002000 {
+ compatible = "nxp,lpc1850-gpdma", "arm,pl080", "arm,primecell";
+ arm,primecell-periphid = <0x00041080>;
+ reg = <0x40002000 0x1000>;
+ interrupts = <2>;
+ clocks = <&ccu1 CLK_CPU_DMA>;
+ clock-names = "apb_pclk";
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <16>;
+ lli-bus-interface-ahb1;
+ lli-bus-interface-ahb2;
+ mem-bus-interface-ahb1;
+ mem-bus-interface-ahb2;
+ memcpy-burst-size = <256>;
+ memcpy-bus-width = <32>;
+};
+
+dmamux: dma-mux {
+ compatible = "nxp,lpc1850-dmamux";
+ #dma-cells = <3>;
+ dma-requests = <64>;
+ dma-masters = <&dmac>;
+};
+
+uart0: serial@40081000 {
+ compatible = "nxp,lpc1850-uart", "ns16550a";
+ reg = <0x40081000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <24>;
+ clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+ clock-names = "uartclk", "reg";
+ dmas = <&dmamux 1 1 2
+ &dmamux 2 1 2>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
new file mode 100644
index 000000000..9ab4d81ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,uart-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek UART APDMA controller
+
+maintainers:
+ - Long Cheng <long.cheng@mediatek.com>
+
+description: |
+ The MediaTek UART APDMA controller provides DMA capabilities
+ for the UART peripheral bus.
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2712-uart-dma
+ - mediatek,mt6795-uart-dma
+ - mediatek,mt8365-uart-dma
+ - mediatek,mt8516-uart-dma
+ - const: mediatek,mt6577-uart-dma
+ - enum:
+ - mediatek,mt6577-uart-dma
+
+ reg:
+ minItems: 1
+ maxItems: 16
+
+ interrupts:
+ description: |
+ TX, RX interrupt lines for each UART APDMA channel
+ minItems: 1
+ maxItems: 16
+
+ clocks:
+ description: Must contain one entry for the APDMA main clock
+ maxItems: 1
+
+ clock-names:
+ const: apdma
+
+ "#dma-cells":
+ const: 1
+ description: |
+ The first cell specifies the UART APDMA channel number
+
+ dma-requests:
+ description: |
+ Number of virtual channels of the UART APDMA controller
+ maximum: 16
+
+ mediatek,dma-33bits:
+ type: boolean
+ description: Enable 33-bits UART APDMA support
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+if:
+ not:
+ required:
+ - dma-requests
+then:
+ properties:
+ interrupts:
+ maxItems: 8
+ reg:
+ maxItems: 8
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt2712-clk.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ apdma: dma-controller@11000400 {
+ compatible = "mediatek,mt2712-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000400 0 0x80>,
+ <0 0x11000480 0 0x80>,
+ <0 0x11000500 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>,
+ <0 0x11000680 0 0x80>,
+ <0 0x11000700 0 0x80>,
+ <0 0x11000780 0 0x80>,
+ <0 0x11000800 0 0x80>,
+ <0 0x11000880 0 0x80>,
+ <0 0x11000900 0 0x80>,
+ <0 0x11000980 0 0x80>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+ dma-requests = <12>;
+ clocks = <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "apdma";
+ mediatek,dma-33bits;
+ #dma-cells = <1>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
new file mode 100644
index 000000000..1f0875bd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-hdmac.txt
@@ -0,0 +1,32 @@
+* Milbeaut AHB DMA Controller
+
+Milbeaut AHB DMA controller has transfer capability below.
+ - device to memory transfer
+ - memory to device transfer
+
+Required property:
+- compatible: Should be "socionext,milbeaut-m10v-hdmac"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+ Number of channels is configurable - 2, 4 or 8, so
+ the number of interrupts specified should be {2,4,8}.
+- #dma-cells: Should be 1. Specify the ID of the slave.
+- clocks: Phandle to the clock used by the HDMAC module.
+
+
+Example:
+
+ hdmac1: dma-controller@1e110000 {
+ compatible = "socionext,milbeaut-m10v-hdmac";
+ reg = <0x1e110000 0x10000>;
+ interrupts = <0 132 4>,
+ <0 133 4>,
+ <0 134 4>,
+ <0 135 4>,
+ <0 136 4>,
+ <0 137 4>,
+ <0 138 4>,
+ <0 139 4>;
+ #dma-cells = <1>;
+ clocks = <&dummy_clk>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt b/Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
new file mode 100644
index 000000000..305791804
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/milbeaut-m10v-xdmac.txt
@@ -0,0 +1,24 @@
+* Milbeaut AXI DMA Controller
+
+Milbeaut AXI DMA controller has only memory to memory transfer capability.
+
+* DMA controller
+
+Required property:
+- compatible: Should be "socionext,milbeaut-m10v-xdmac"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+ Number of channels is configurable - 2, 4 or 8, so
+ the number of interrupts specified should be {2,4,8}.
+- #dma-cells: Should be 1.
+
+Example:
+ xdmac0: dma-controller@1c250000 {
+ compatible = "socionext,milbeaut-m10v-xdmac";
+ reg = <0x1c250000 0x1000>;
+ interrupts = <0 17 0x4>,
+ <0 18 0x4>,
+ <0 19 0x4>,
+ <0 20 0x4>;
+ #dma-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
new file mode 100644
index 000000000..ec18bf0a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt
@@ -0,0 +1,81 @@
+* MARVELL MMP DMA controller
+
+Marvell Peripheral DMA Controller
+Used platforms: pxa688, pxa910, pxa3xx, etc
+
+Required properties:
+- compatible: Should be "marvell,pdma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Either contain all of the per-channel DMA interrupts
+ or one irq for pdma device
+
+Optional properties:
+- dma-channels: Number of DMA channels supported by the controller (defaults
+ to 32 when not specified)
+- #dma-channels: deprecated
+- dma-requests: Number of DMA requestor lines supported by the controller
+ (defaults to 32 when not specified)
+- #dma-requests: deprecated
+
+"marvell,pdma-1.0"
+Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
+
+Examples:
+
+/*
+ * Each channel has specific irq
+ * ICU parse out irq channel from ICU register,
+ * while DMA controller may not able to distinguish the irq channel
+ * Using this method, interrupt-parent is required as demuxer
+ * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq,
+ * 18~21 is ADMA irq
+ */
+pdma: dma-controller@d4000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0xd4000000 0x10000>;
+ interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
+ interrupt-parent = <&intcmux32>;
+ dma-channels = <16>;
+ };
+
+/*
+ * One irq for all channels
+ * Dmaengine driver (DMA controller) distinguish irq channel via
+ * parsing internal register
+ */
+pdma: dma-controller@d4000000 {
+ compatible = "marvell,pdma-1.0";
+ reg = <0xd4000000 0x10000>;
+ interrupts = <47>;
+ dma-channels = <16>;
+ };
+
+
+Marvell Two Channel DMA Controller used specifically for audio
+Used platforms: pxa688, pxa910
+
+Required properties:
+- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ"
+- reg: Should contain DMA registers location and length.
+- interrupts: Either contain all of the per-channel DMA interrupts
+ or one irq for dma device
+
+"marvell,adma-1.0" used on pxa688
+"marvell,pxa910-squ" used on pxa910
+
+Examples:
+
+/* each channel has specific irq */
+adma0: dma-controller@d42a0800 {
+ compatible = "marvell,adma-1.0";
+ reg = <0xd42a0800 0x100>;
+ interrupts = <18 19>;
+ interrupt-parent = <&intcmux32>;
+ };
+
+/* One irq for all channels */
+squ: dma-controller@d42a0800 {
+ compatible = "marvell,pxa910-squ";
+ reg = <0xd42a0800 0x100>;
+ interrupts = <46>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
new file mode 100644
index 000000000..7e14e2667
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -0,0 +1,45 @@
+MOXA ART DMA Controller
+
+See dma.txt first
+
+Required properties:
+
+- compatible : Must be "moxa,moxart-dma"
+- reg : Should contain registers location and length
+- interrupts : Should contain an interrupt-specifier for the sole
+ interrupt generated by the device
+- #dma-cells : Should be 1, a single cell holding a line request number
+
+Example:
+
+ dma: dma@90500000 {
+ compatible = "moxa,moxart-dma";
+ reg = <0x90500080 0x40>;
+ interrupts = <24 0>;
+ #dma-cells = <1>;
+ };
+
+
+Clients:
+
+DMA clients connected to the MOXA ART DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each channel:
+a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. Peripheral identifier for the hardware handshaking interface.
+
+Example:
+Use specific request line passing from dma
+For example, MMC request line is 5
+
+ mmc: mmc@98e00000 {
+ compatible = "moxa,moxart-mmc";
+ reg = <0x98e00000 0x5C>;
+ interrupts = <5 0>;
+ clocks = <&clk_apb>;
+ dmas = <&dma 5>,
+ <&dma 5>;
+ dma-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/dma/mpc512x-dma.txt b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
new file mode 100644
index 000000000..a6511df16
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt
@@ -0,0 +1,29 @@
+* Freescale MPC512x and MPC8308 DMA Controller
+
+The DMA controller in Freescale MPC512x and MPC8308 SoCs can move
+blocks of memory contents between memory and peripherals or
+from memory to memory.
+
+Refer to "Generic DMA Controller and DMA request bindings" in
+the dma/dma.txt file for a more detailed description of binding.
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma";
+- reg: should contain the DMA controller registers location and length;
+- interrupt for the DMA controller: syntax of interrupt client node
+ is described in interrupt-controller/interrupts.txt file.
+- #dma-cells: the length of the DMA specifier, must be <1>.
+ Each channel of this DMA controller has a peripheral request line,
+ the assignment is fixed in hardware. This one cell
+ in dmas property of a client device represents the channel number.
+
+Example:
+
+ dma0: dma@14000 {
+ compatible = "fsl,mpc5121-dma";
+ reg = <0x14000 0x1800>;
+ interrupts = <65 0x8>;
+ #dma-cells = <1>;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/mtk-hsdma.txt b/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
new file mode 100644
index 000000000..4bb317359
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mtk-hsdma.txt
@@ -0,0 +1,33 @@
+MediaTek High-Speed DMA Controller
+==================================
+
+This device follows the generic DMA bindings defined in dma/dma.txt.
+
+Required properties:
+
+- compatible: Must be one of
+ "mediatek,mt7622-hsdma": for MT7622 SoC
+ "mediatek,mt7623-hsdma": for MT7623 SoC
+- reg: Should contain the register's base address and length.
+- interrupts: Should contain a reference to the interrupt used by this
+ device.
+- clocks: Should be the clock specifiers corresponding to the entry in
+ clock-names property.
+- clock-names: Should contain "hsdma" entries.
+- power-domains: Phandle to the power domain that the device is part of
+- #dma-cells: The length of the DMA specifier, must be <1>. This one cell
+ in dmas property of a client device represents the channel
+ number.
+Example:
+
+ hsdma: dma-controller@1b007000 {
+ compatible = "mediatek,mt7623-hsdma";
+ reg = <0 0x1b007000 0 0x1000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&ethsys CLK_ETHSYS_HSDMA>;
+ clock-names = "hsdma";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+ #dma-cells = <1>;
+ };
+
+DMA clients must use the format described in dma/dma.txt file.
diff --git a/Documentation/devicetree/bindings/dma/mv-xor-v2.txt b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
new file mode 100644
index 000000000..9c38bbe7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mv-xor-v2.txt
@@ -0,0 +1,28 @@
+* Marvell XOR v2 engines
+
+Required properties:
+- compatible: one of the following values:
+ "marvell,armada-7k-xor"
+ "marvell,xor-v2"
+- reg: Should contain registers location and length (two sets)
+ the first set is the DMA registers
+ the second set is the global registers
+- msi-parent: Phandle to the MSI-capable interrupt controller used for
+ interrupts.
+
+Optional properties:
+- clocks: Optional reference to the clocks used by the XOR engine.
+- clock-names: mandatory if there is a second clock, in this case the
+ name must be "core" for the first clock and "reg" for the second
+ one
+
+
+Example:
+
+ xor0@400000 {
+ compatible = "marvell,xor-v2";
+ reg = <0x400000 0x1000>,
+ <0x410000 0x1000>;
+ msi-parent = <&gic_v2m0>;
+ dma-coherent;
+ };
diff --git a/Documentation/devicetree/bindings/dma/mv-xor.txt b/Documentation/devicetree/bindings/dma/mv-xor.txt
new file mode 100644
index 000000000..0ffb4d876
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mv-xor.txt
@@ -0,0 +1,40 @@
+* Marvell XOR engines
+
+Required properties:
+- compatible: Should be one of the following:
+ - "marvell,orion-xor"
+ - "marvell,armada-380-xor"
+ - "marvell,armada-3700-xor".
+- reg: Should contain registers location and length (two sets)
+ the first set is the low registers, the second set the high
+ registers for the XOR engine.
+- clocks: pointer to the reference clock
+
+The DT node must also contains sub-nodes for each XOR channel that the
+XOR engine has. Those sub-nodes have the following required
+properties:
+- interrupts: interrupt of the XOR channel
+
+The sub-nodes used to contain one or several of the following
+properties, but they are now deprecated:
+- dmacap,memcpy to indicate that the XOR channel is capable of memcpy operations
+- dmacap,memset to indicate that the XOR channel is capable of memset operations
+- dmacap,xor to indicate that the XOR channel is capable of xor operations
+- dmacap,interrupt to indicate that the XOR channel is capable of
+ generating interrupts
+
+Example:
+
+xor@d0060900 {
+ compatible = "marvell,orion-xor";
+ reg = <0xd0060900 0x100
+ 0xd0060b00 0x100>;
+ clocks = <&coreclk 0>;
+
+ xor00 {
+ interrupts = <51>;
+ };
+ xor01 {
+ interrupts = <52>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
new file mode 100644
index 000000000..c8894476b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra186-gpc-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPC DMA Controller
+
+description: |
+ The Tegra General Purpose Central (GPC) DMA controller is used for faster
+ data transfers between memory to memory, memory to device and device to
+ memory.
+
+maintainers:
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Rajesh Gumasta <rgumasta@nvidia.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - const: nvidia,tegra186-gpcdma
+ - items:
+ - enum:
+ - nvidia,tegra234-gpcdma
+ - nvidia,tegra194-gpcdma
+ - const: nvidia,tegra186-gpcdma
+
+ "#dma-cells":
+ const: 1
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Should contain all of the per-channel DMA interrupts in
+ ascending order with respect to the DMA channel index.
+ minItems: 1
+ maxItems: 31
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: gpcdma
+
+ iommus:
+ maxItems: 1
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - resets
+ - reset-names
+ - "#dma-cells"
+ - iommus
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/memory/tegra186-mc.h>
+ #include <dt-bindings/reset/tegra186-reset.h>
+
+ dma-controller@2600000 {
+ compatible = "nvidia,tegra186-gpcdma";
+ reg = <0x2600000 0x210000>;
+ resets = <&bpmp TEGRA186_RESET_GPCDMA>;
+ reset-names = "gpcdma";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
+ dma-coherent;
+ };
+...
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
new file mode 100644
index 000000000..c6908e7c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt
@@ -0,0 +1,44 @@
+* NVIDIA Tegra APB DMA controller
+
+Required properties:
+- compatible: Should be "nvidia,<chip>-apbdma"
+- reg: Should contain DMA registers location and length. This shuld include
+ all of the per-channel registers.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - dma
+- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
+ client nodes' dmas properties. The specifier represents the DMA request
+ select value for the peripheral. For more details, consult the Tegra TRM's
+ documentation of the APB DMA channel control register REQ_SEL field.
+
+Examples:
+
+apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = < 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04
+ 0 144 0x04
+ 0 145 0x04
+ 0 146 0x04
+ 0 147 0x04
+ 0 148 0x04
+ 0 149 0x04
+ 0 150 0x04
+ 0 151 0x04 >;
+ clocks = <&tegra_car 34>;
+ resets = <&tegra_car 34>;
+ reset-names = "dma";
+ #dma-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
new file mode 100644
index 000000000..fef804565
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra210-adma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Audio DMA (ADMA) controller
+
+description: |
+ The Tegra Audio DMA controller is used for transferring data
+ between system memory and the Audio Processing Engine (APE).
+
+maintainers:
+ - Jon Hunter <jonathanh@nvidia.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - nvidia,tegra210-adma
+ - nvidia,tegra186-adma
+ - items:
+ - enum:
+ - nvidia,tegra234-adma
+ - nvidia,tegra194-adma
+ - const: nvidia,tegra186-adma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ Should contain all of the per-channel DMA interrupts in
+ ascending order with respect to the DMA channel index.
+ minItems: 1
+ maxItems: 32
+
+ clocks:
+ description: Must contain one entry for the ADMA module clock
+ maxItems: 1
+
+ clock-names:
+ const: d_audio
+
+ "#dma-cells":
+ description: |
+ The first cell denotes the receive/transmit request number and
+ should be between 1 and the maximum number of requests supported.
+ This value corresponds to the RX/TX_REQUEST_SELECT fields in the
+ ADMA_CHn_CTRL register.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include<dt-bindings/clock/tegra210-car.h>
+
+ dma-controller@702e2000 {
+ compatible = "nvidia,tegra210-adma";
+ reg = <0x702e2000 0x2000>;
+ interrupt-parent = <&tegra_agic>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>;
+ clock-names = "d_audio";
+ #dma-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml
new file mode 100644
index 000000000..93b484755
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/owl-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi Owl SoCs DMA controller
+
+description: |
+ The OWL DMA is a general-purpose direct memory access controller capable of
+ supporting 10 independent DMA channels for the Actions Semi S700 SoC and 12
+ independent DMA channels for the S500 and S900 SoC variants.
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - actions,s500-dma
+ - actions,s700-dma
+ - actions,s900-dma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ controller supports 4 interrupts, which are freely assignable to the
+ DMA channels.
+ maxItems: 4
+
+ "#dma-cells":
+ const: 1
+
+ dma-channels:
+ maximum: 12
+
+ dma-requests:
+ maximum: 46
+
+ clocks:
+ maxItems: 1
+ description:
+ Phandle and Specifier of the clock feeding the DMA controller.
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#dma-cells"
+ - dma-channels
+ - dma-requests
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ dma: dma-controller@e0260000 {
+ compatible = "actions,s900-dma";
+ reg = <0xe0260000 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <12>;
+ dma-requests = <46>;
+ clocks = <&clock 22>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,adm.yaml b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
new file mode 100644
index 000000000..6a9d7bc74
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ADM DMA Controller
+
+maintainers:
+ - Christian Marangi <ansuelsmth@gmail.com>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ QCOM ADM DMA controller provides DMA capabilities for
+ peripheral buses such as NAND and SPI.
+
+properties:
+ compatible:
+ const: qcom,adm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#dma-cells":
+ const: 1
+
+ clocks:
+ items:
+ - description: phandle to the core clock
+ - description: phandle to the iface clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: iface
+
+ resets:
+ items:
+ - description: phandle to the clk reset
+ - description: phandle to the pbus reset
+ - description: phandle to the c0 reset
+ - description: phandle to the c1 reset
+ - description: phandle to the c2 reset
+
+ reset-names:
+ items:
+ - const: clk
+ - const: pbus
+ - const: c0
+ - const: c1
+ - const: c2
+
+ qcom,ee:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: indicates the security domain identifier used in the secure world.
+ minimum: 0
+ maximum: 255
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#dma-cells"
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - qcom,ee
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+ #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+
+ adm_dma: dma-controller@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>,
+ <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
new file mode 100644
index 000000000..003098caf
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc BAM DMA controller
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ # APQ8064, IPQ8064 and MSM8960
+ - qcom,bam-v1.3.0
+ # MSM8974, APQ8074 and APQ8084
+ - qcom,bam-v1.4.0
+ # MSM8916 and SDM845
+ - qcom,bam-v1.7.0
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: bam_clk
+
+ "#dma-cells":
+ const: 1
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ minItems: 1
+ maxItems: 4
+
+ num-channels:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Indicates supported number of DMA channels in a remotely controlled bam.
+
+ qcom,controlled-remotely:
+ type: boolean
+ description:
+ Indicates that the bam is controlled by remote proccessor i.e. execution
+ environment.
+
+ qcom,ee:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+ description:
+ Indicates the active Execution Environment identifier (0-7) used in the
+ secure world.
+
+ qcom,num-ees:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Indicates supported number of Execution Environments in a remotely
+ controlled bam.
+
+ qcom,powered-remotely:
+ type: boolean
+ description:
+ Indicates that the bam is powered up by a remote processor but must be
+ initialized by the local processor.
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - "#dma-cells"
+ - interrupts
+ - qcom,ee
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+ dma-controller@f9944000 {
+ compatible = "qcom,bam-v1.4.0";
+ reg = <0xf9944000 0x19000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
new file mode 100644
index 000000000..eabf8a76d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,gpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc GPI DMA controller
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description: |
+ QCOM GPI DMA controller provides DMA capabilities for
+ peripheral buses such as I2C, UART, and SPI.
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - qcom,sc7280-gpi-dma
+ - qcom,sdm845-gpi-dma
+ - qcom,sm6350-gpi-dma
+ - qcom,sm8150-gpi-dma
+ - qcom,sm8250-gpi-dma
+ - qcom,sm8350-gpi-dma
+ - qcom,sm8450-gpi-dma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description:
+ Interrupt lines for each GPI instance
+ minItems: 1
+ maxItems: 13
+
+ "#dma-cells":
+ const: 3
+ description: >
+ DMA clients must use the format described in dma.txt, giving a phandle
+ to the DMA controller plus the following 3 integer cells:
+ - channel: if set to 0xffffffff, any available channel will be allocated
+ for the client. Otherwise, the exact channel specified will be used.
+ - seid: serial id of the client as defined in the SoC documentation.
+ - client: type of the client as defined in dt-bindings/dma/qcom-gpi.h
+
+ iommus:
+ maxItems: 1
+
+ dma-channels:
+ maximum: 31
+
+ dma-channel-mask:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#dma-cells"
+ - iommus
+ - dma-channels
+ - dma-channel-mask
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/dma/qcom-gpi.h>
+ gpi_dma0: dma-controller@800000 {
+ compatible = "qcom,sdm845-gpi-dma";
+ #dma-cells = <3>;
+ reg = <0x00800000 0x60000>;
+ iommus = <&apps_smmu 0x0016 0x0>;
+ dma-channels = <13>;
+ dma-channel-mask = <0xfa>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
new file mode 100644
index 000000000..1ae474873
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_hidma_mgmt.txt
@@ -0,0 +1,95 @@
+Qualcomm Technologies HIDMA Management interface
+
+Qualcomm Technologies HIDMA is a high speed DMA device. It only supports
+memcpy and memset capabilities. It has been designed for virtualized
+environments.
+
+Each HIDMA HW instance consists of multiple DMA channels. These channels
+share the same bandwidth. The bandwidth utilization can be partitioned
+among channels based on the priority and weight assignments.
+
+There are only two priority levels and 15 weigh assignments possible.
+
+Other parameters here determine how much of the system bus this HIDMA
+instance can use like maximum read/write request and number of bytes to
+read/write in a single burst.
+
+Main node required properties:
+- compatible: "qcom,hidma-mgmt-1.0";
+- reg: Address range for DMA device
+- dma-channels: Number of channels supported by this DMA controller.
+- max-write-burst-bytes: Maximum write burst in bytes that HIDMA can
+ occupy the bus for in a single transaction. A memcpy requested is
+ fragmented to multiples of this amount. This parameter is used while
+ writing into destination memory. Setting this value incorrectly can
+ starve other peripherals in the system.
+- max-read-burst-bytes: Maximum read burst in bytes that HIDMA can
+ occupy the bus for in a single transaction. A memcpy request is
+ fragmented to multiples of this amount. This parameter is used while
+ reading the source memory. Setting this value incorrectly can starve
+ other peripherals in the system.
+- max-write-transactions: This value is how many times a write burst is
+ applied back to back while writing to the destination before yielding
+ the bus.
+- max-read-transactions: This value is how many times a read burst is
+ applied back to back while reading the source before yielding the bus.
+- channel-reset-timeout-cycles: Channel reset timeout in cycles for this SOC.
+ Once a reset is applied to the HW, HW starts a timer for reset operation
+ to confirm. If reset is not completed within this time, HW reports reset
+ failure.
+
+Sub-nodes:
+
+HIDMA has one or more DMA channels that are used to move data from one
+memory location to another.
+
+When the OS is not in control of the management interface (i.e. it's a guest),
+the channel nodes appear on their own, not under a management node.
+
+Required properties:
+- compatible: must contain "qcom,hidma-1.0" for initial HW or
+ "qcom,hidma-1.1"/"qcom,hidma-1.2" for MSI capable HW.
+- reg: Addresses for the transfer and event channel
+- interrupts: Should contain the event interrupt
+- desc-count: Number of asynchronous requests this channel can handle
+- iommus: required a iommu node
+
+Optional properties for MSI:
+- msi-parent : See the generic MSI binding described in
+ devicetree/bindings/interrupt-controller/msi.txt for a description of the
+ msi-parent property.
+
+Example:
+
+Hypervisor OS configuration:
+
+ hidma-mgmt@f9984000 = {
+ compatible = "qcom,hidma-mgmt-1.0";
+ reg = <0xf9984000 0x15000>;
+ dma-channels = <6>;
+ max-write-burst-bytes = <1024>;
+ max-read-burst-bytes = <1024>;
+ max-write-transactions = <31>;
+ max-read-transactions = <31>;
+ channel-reset-timeout-cycles = <0x500>;
+
+ hidma_24: dma-controller@5c050000 {
+ compatible = "qcom,hidma-1.0";
+ reg = <0 0x5c050000 0x0 0x1000>,
+ <0 0x5c0b0000 0x0 0x1000>;
+ interrupts = <0 389 0>;
+ desc-count = <10>;
+ iommus = <&system_mmu>;
+ };
+ };
+
+Guest OS configuration:
+
+ hidma_24: dma-controller@5c050000 {
+ compatible = "qcom,hidma-1.0";
+ reg = <0 0x5c050000 0x0 0x1000>,
+ <0 0x5c0b0000 0x0 0x1000>;
+ interrupts = <0 389 0>;
+ desc-count = <10>;
+ iommus = <&system_mmu>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/renesas,nbpfaxi.txt b/Documentation/devicetree/bindings/dma/renesas,nbpfaxi.txt
new file mode 100644
index 000000000..d2e1e62e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,nbpfaxi.txt
@@ -0,0 +1,69 @@
+* Renesas "Type-AXI" NBPFAXI* DMA controllers
+
+* DMA controller
+
+Required properties
+
+- compatible: must be one of
+ "renesas,nbpfaxi64dmac1b4"
+ "renesas,nbpfaxi64dmac1b8"
+ "renesas,nbpfaxi64dmac1b16"
+ "renesas,nbpfaxi64dmac4b4"
+ "renesas,nbpfaxi64dmac4b8"
+ "renesas,nbpfaxi64dmac4b16"
+ "renesas,nbpfaxi64dmac8b4"
+ "renesas,nbpfaxi64dmac8b8"
+ "renesas,nbpfaxi64dmac8b16"
+- #dma-cells: must be 2: the first integer is a terminal number, to which this
+ slave is connected, the second one is flags. Flags is a bitmask
+ with the following bits defined:
+
+#define NBPF_SLAVE_RQ_HIGH 1
+#define NBPF_SLAVE_RQ_LOW 2
+#define NBPF_SLAVE_RQ_LEVEL 4
+
+Optional properties:
+- max-burst-mem-read: limit burst size for memory reads
+ (DMA_MEM_TO_MEM/DMA_MEM_TO_DEV) to this value, specified in bytes, rather
+ than using the maximum burst size allowed by the hardware's buffer size.
+- max-burst-mem-write: limit burst size for memory writes
+ (DMA_DEV_TO_MEM/DMA_MEM_TO_MEM) to this value, specified in bytes, rather
+ than using the maximum burst size allowed by the hardware's buffer size.
+ If both max-burst-mem-read and max-burst-mem-write are set, DMA_MEM_TO_MEM
+ will use the lower value.
+
+You can use dma-channels and dma-requests as described in dma.txt, although they
+won't be used, this information is derived from the compatibility string.
+
+Example:
+
+ dma: dma-controller@48000000 {
+ compatible = "renesas,nbpfaxi64dmac8b4";
+ reg = <0x48000000 0x400>;
+ interrupts = <0 12 0x4
+ 0 13 0x4
+ 0 14 0x4
+ 0 15 0x4
+ 0 16 0x4
+ 0 17 0x4
+ 0 18 0x4
+ 0 19 0x4>;
+ #dma-cells = <2>;
+ dma-channels = <8>;
+ dma-requests = <8>;
+ };
+
+* DMA client
+
+Required properties:
+
+dmas and dma-names are required, as described in dma.txt.
+
+Example:
+
+#include <dt-bindings/dma/nbpfaxi.h>
+
+...
+ dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)
+ &dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+ dma-names = "rx", "tx";
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
new file mode 100644
index 000000000..89b591a05
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rcar-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car and RZ/G DMA Controller
+
+maintainers:
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,dmac-r8a7742 # RZ/G1H
+ - renesas,dmac-r8a7743 # RZ/G1M
+ - renesas,dmac-r8a7744 # RZ/G1N
+ - renesas,dmac-r8a7745 # RZ/G1E
+ - renesas,dmac-r8a77470 # RZ/G1C
+ - renesas,dmac-r8a774a1 # RZ/G2M
+ - renesas,dmac-r8a774b1 # RZ/G2N
+ - renesas,dmac-r8a774c0 # RZ/G2E
+ - renesas,dmac-r8a774e1 # RZ/G2H
+ - renesas,dmac-r8a7790 # R-Car H2
+ - renesas,dmac-r8a7791 # R-Car M2-W
+ - renesas,dmac-r8a7792 # R-Car V2H
+ - renesas,dmac-r8a7793 # R-Car M2-N
+ - renesas,dmac-r8a7794 # R-Car E2
+ - renesas,dmac-r8a7795 # R-Car H3
+ - renesas,dmac-r8a7796 # R-Car M3-W
+ - renesas,dmac-r8a77961 # R-Car M3-W+
+ - renesas,dmac-r8a77965 # R-Car M3-N
+ - renesas,dmac-r8a77970 # R-Car V3M
+ - renesas,dmac-r8a77980 # R-Car V3H
+ - renesas,dmac-r8a77990 # R-Car E3
+ - renesas,dmac-r8a77995 # R-Car D3
+ - const: renesas,rcar-dmac
+
+ - items:
+ - enum:
+ - renesas,dmac-r8a779a0 # R-Car V3U
+ - renesas,dmac-r8a779f0 # R-Car S4-8
+ - renesas,dmac-r8a779g0 # R-Car V4H
+ - const: renesas,rcar-gen4-dmac # R-Car Gen4
+
+ reg: true
+
+ interrupts:
+ minItems: 9
+ maxItems: 17
+
+ interrupt-names:
+ minItems: 9
+ items:
+ - const: error
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+ - pattern: "^ch([0-9]|1[0-5])$"
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: fck
+
+ '#dma-cells':
+ const: 1
+ description:
+ The cell specifies the MID/RID of the DMAC port connected to
+ the DMA client.
+
+ dma-channels:
+ minimum: 8
+ maximum: 16
+
+ dma-channel-mask: true
+
+ iommus:
+ minItems: 8
+ maxItems: 16
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - '#dma-cells'
+ - dma-channels
+ - power-domains
+ - resets
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen4-dmac
+then:
+ properties:
+ reg:
+ items:
+ - description: Base register block
+ - description: Channel register block
+else:
+ properties:
+ reg:
+ maxItems: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7790-sysc.h>
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
+ reg = <0xe6700000 0x20000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
new file mode 100644
index 000000000..1e25c5b0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rz-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,G2UL,V2L} DMA Controller
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a07g043-dmac # RZ/G2UL
+ - renesas,r9a07g044-dmac # RZ/G2{L,LC}
+ - renesas,r9a07g054-dmac # RZ/V2L
+ - const: renesas,rz-dmac
+
+ reg:
+ items:
+ - description: Control and channel register block
+ - description: DMA extended resource selector block
+
+ interrupts:
+ maxItems: 17
+
+ interrupt-names:
+ items:
+ - const: error
+ - const: ch0
+ - const: ch1
+ - const: ch2
+ - const: ch3
+ - const: ch4
+ - const: ch5
+ - const: ch6
+ - const: ch7
+ - const: ch8
+ - const: ch9
+ - const: ch10
+ - const: ch11
+ - const: ch12
+ - const: ch13
+ - const: ch14
+ - const: ch15
+
+ clocks:
+ items:
+ - description: DMA main clock
+ - description: DMA register access clock
+
+ '#dma-cells':
+ const: 1
+ description:
+ The cell specifies the encoded MID/RID values of the DMAC port
+ connected to the DMA client and the slave channel configuration
+ parameters.
+ bits[0:9] - Specifies MID/RID value
+ bit[10] - Specifies DMA request high enable (HIEN)
+ bit[11] - Specifies DMA request detection type (LVL)
+ bits[12:14] - Specifies DMAACK output mode (AM)
+ bit[15] - Specifies Transfer Mode (TM)
+
+ dma-channels:
+ const: 16
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: Reset for DMA ARESETN reset terminal
+ - description: Reset for DMA RST_ASYNC reset terminal
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - '#dma-cells'
+ - dma-channels
+ - power-domains
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+ dmac: dma-controller@11820000 {
+ compatible = "renesas,r9a07g044-dmac",
+ "renesas,rz-dmac";
+ reg = <0x11820000 0x10000>,
+ <0x11830000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
+ <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_DMAC_ARESETN>,
+ <&cpg R9A07G044_DMAC_RST_ASYNC>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
new file mode 100644
index 000000000..d83013b0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rzn1-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 DMA mux
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+ - $ref: "dma-router.yaml#"
+
+properties:
+ compatible:
+ const: renesas,rzn1-dmamux
+
+ reg:
+ maxItems: 1
+ description: DMA mux first register offset within the system control parent.
+
+ '#dma-cells':
+ const: 6
+ description:
+ The first four cells are dedicated to the master DMA controller. The fifth
+ cell gives the DMA mux bit index that must be set starting from 0. The
+ sixth cell gives the binary value that must be written there, ie. 0 or 1.
+
+ dma-masters:
+ minItems: 1
+ maxItems: 2
+
+ dma-requests:
+ const: 32
+
+required:
+ - reg
+ - dma-requests
+
+additionalProperties: false
+
+examples:
+ - |
+ dma-router@a0 {
+ compatible = "renesas,rzn1-dmamux";
+ reg = <0xa0 4>;
+ #dma-cells = <6>;
+ dma-masters = <&dma0 &dma1>;
+ dma-requests = <32>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
new file mode 100644
index 000000000..ab287c652
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,usb-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas USB DMA Controller
+
+maintainers:
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a7742-usb-dmac # RZ/G1H
+ - renesas,r8a7743-usb-dmac # RZ/G1M
+ - renesas,r8a7744-usb-dmac # RZ/G1N
+ - renesas,r8a7745-usb-dmac # RZ/G1E
+ - renesas,r8a77470-usb-dmac # RZ/G1C
+ - renesas,r8a774a1-usb-dmac # RZ/G2M
+ - renesas,r8a774b1-usb-dmac # RZ/G2N
+ - renesas,r8a774c0-usb-dmac # RZ/G2E
+ - renesas,r8a774e1-usb-dmac # RZ/G2H
+ - renesas,r8a7790-usb-dmac # R-Car H2
+ - renesas,r8a7791-usb-dmac # R-Car M2-W
+ - renesas,r8a7793-usb-dmac # R-Car M2-N
+ - renesas,r8a7794-usb-dmac # R-Car E2
+ - renesas,r8a7795-usb-dmac # R-Car H3
+ - renesas,r8a7796-usb-dmac # R-Car M3-W
+ - renesas,r8a77961-usb-dmac # R-Car M3-W+
+ - renesas,r8a77965-usb-dmac # R-Car M3-N
+ - renesas,r8a77990-usb-dmac # R-Car E3
+ - renesas,r8a77995-usb-dmac # R-Car D3
+ - const: renesas,usb-dmac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - pattern: ch0
+ - pattern: ch1
+
+ clocks:
+ maxItems: 1
+
+ '#dma-cells':
+ const: 1
+ description:
+ The cell specifies the channel number of the DMAC port connected to
+ the DMA client.
+
+ dma-channels:
+ const: 2
+
+ iommus:
+ minItems: 2
+ maxItems: 2
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - '#dma-cells'
+ - dma-channels
+ - power-domains
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7790-sysc.h>
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
+ reg = <0xe65a0000 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
new file mode 100644
index 000000000..327175578
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/sifive,fu540-c000-pdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Unleashed Rev C000 Platform DMA
+
+maintainers:
+ - Green Wan <green.wan@sifive.com>
+ - Palmer Debbelt <palmer@sifive.com>
+ - Paul Walmsley <paul.walmsley@sifive.com>
+
+description: |
+ Platform DMA is a DMA engine of SiFive Unleashed. It supports 4
+ channels. Each channel has 2 interrupts. One is for DMA done and
+ the other is for DME error.
+
+ In different SoC, DMA could be attached to different IRQ line.
+ DT file need to be changed to meet the difference. For technical
+ doc,
+
+ https://static.dev.sifive.com/FU540-C000-v1.0.pdf
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - sifive,fu540-c000-pdma
+ - const: sifive,pdma0
+ description:
+ Should be "sifive,<chip>-pdma" and "sifive,pdma<version>".
+ Supported compatible strings are -
+ "sifive,fu540-c000-pdma" for the SiFive PDMA v0 as integrated onto the
+ SiFive FU540 chip resp and "sifive,pdma0" for the SiFive PDMA v0 IP block
+ with no chip integration tweaks.
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+
+ dma-channels:
+ description: For backwards-compatibility, the default value is 4
+ minimum: 1
+ maximum: 4
+ default: 4
+
+ '#dma-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ dma-controller@3000000 {
+ compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
+ reg = <0x3000000 0x8000>;
+ dma-channels = <4>;
+ interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>;
+ #dma-cells = <1>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
new file mode 100644
index 000000000..c13649bf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dma-spear1340.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware DMA Controller
+
+maintainers:
+ - Viresh Kumar <vireshk@kernel.org>
+ - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - const: snps,dma-spear1340
+ - items:
+ - enum:
+ - renesas,r9a06g032-dma
+ - const: renesas,rzn1-dma
+
+
+ "#dma-cells":
+ minimum: 3
+ maximum: 4
+ description: |
+ First cell is a phandle pointing to the DMA controller. Second one is
+ the DMA request line number. Third cell is the memory master identifier
+ for transfers on dynamically allocated channel. Fourth cell is the
+ peripheral master identifier for transfers on an allocated channel. Fifth
+ cell is an optional mask of the DMA channels permitted to be allocated
+ for the corresponding client device.
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description: AHB interface reference clock.
+ const: hclk
+
+ dma-channels:
+ description: |
+ Number of DMA channels supported by the controller. In case if
+ not specified the driver will try to auto-detect this and
+ the rest of the optional parameters.
+ minimum: 1
+ maximum: 8
+
+ dma-requests:
+ minimum: 1
+ maximum: 16
+
+ dma-masters:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Number of DMA masters supported by the controller. In case if
+ not specified the driver will try to auto-detect this and
+ the rest of the optional parameters.
+ minimum: 1
+ maximum: 4
+
+ chan_allocation_order:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ DMA channels allocation order specifier. Zero means ascending order
+ (first free allocated), while one - descending (last free allocated).
+ default: 0
+ enum: [0, 1]
+
+ chan_priority:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ DMA channels priority order. Zero means ascending channels priority
+ so the very first channel has the highest priority. While 1 means
+ descending priority (the last channel has the highest priority).
+ default: 0
+ enum: [0, 1]
+
+ block_size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Maximum block size supported by the DMA controller.
+ enum: [3, 7, 15, 31, 63, 127, 255, 511, 1023, 2047, 4095]
+
+ data-width:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: Data bus width per each DMA master in bytes.
+ items:
+ maxItems: 4
+ items:
+ enum: [4, 8, 16, 32]
+
+ data_width:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ deprecated: true
+ description: |
+ Data bus width per each DMA master in (2^n * 8) bits. This property is
+ deprecated. It' usage is discouraged in favor of data-width one. Moreover
+ the property incorrectly permits to define data-bus width of 8 and 16
+ bits, which is impossible in accordance with DW DMAC IP-core data book.
+ items:
+ maxItems: 4
+ items:
+ enum:
+ - 0 # 8 bits
+ - 1 # 16 bits
+ - 2 # 32 bits
+ - 3 # 64 bits
+ - 4 # 128 bits
+ - 5 # 256 bits
+ default: 0
+
+ multi-block:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ LLP-based multi-block transfer supported by hardware per
+ each DMA channel.
+ items:
+ maxItems: 8
+ items:
+ enum: [0, 1]
+ default: 1
+
+ snps,max-burst-len:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Maximum length of the burst transactions supported by the controller.
+ This property defines the upper limit of the run-time burst setting
+ (CTLx.SRC_MSIZE/CTLx.DST_MSIZE fields) so the allowed burst length
+ will be from 1 to max-burst-len words. It's an array property with one
+ cell per channel in the units determined by the value set in the
+ CTLx.SRC_TR_WIDTH/CTLx.DST_TR_WIDTH fields (data width).
+ items:
+ maxItems: 8
+ items:
+ enum: [4, 8, 16, 32, 64, 128, 256]
+ default: 256
+
+ snps,dma-protection-control:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Bits one-to-one passed to the AHB HPROT[3:1] bus. Each bit setting
+ indicates the following features: bit 0 - privileged mode,
+ bit 1 - DMA is bufferable, bit 2 - DMA is cacheable.
+ default: 0
+ minimum: 0
+ maximum: 7
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - "#dma-cells"
+ - reg
+ - interrupts
+
+examples:
+ - |
+ dma-controller@fc000000 {
+ compatible = "snps,dma-spear1340";
+ reg = <0xfc000000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <12>;
+
+ dma-channels = <8>;
+ dma-requests = <16>;
+ dma-masters = <4>;
+ #dma-cells = <3>;
+
+ chan_allocation_order = <1>;
+ chan_priority = <1>;
+ block_size = <0xfff>;
+ data-width = <8 8>;
+ multi-block = <0 0 0 0 0 0 0 0>;
+ snps,max-burst-len = <16 16 4 4 4 4 4 4>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
new file mode 100644
index 000000000..67aa7bb6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/snps,dw-axi-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare AXI DMA Controller
+
+maintainers:
+ - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+ - Jee Heng Sia <jee.heng.sia@intel.com>
+
+description:
+ Synopsys DesignWare AXI DMA Controller DT Binding
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - snps,axi-dma-1.01a
+ - intel,kmb-axi-dma
+
+ reg:
+ minItems: 1
+ items:
+ - description: Address range of the DMAC registers
+ - description: Address range of the DMAC APB registers
+
+ reg-names:
+ items:
+ - const: axidma_ctrl_regs
+ - const: axidma_apb_regs
+
+ interrupts:
+ description:
+ If the IP-core synthesis parameter DMAX_INTR_IO_TYPE is set to 1, this
+ will be per-channel interrupts. Otherwise, this is a single combined IRQ
+ for all channels.
+ minItems: 1
+ maxItems: 8
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: Module Clock
+
+ clock-names:
+ items:
+ - const: core-clk
+ - const: cfgr-clk
+
+ '#dma-cells':
+ const: 1
+
+ dma-channels:
+ minimum: 1
+ maximum: 8
+
+ resets:
+ maxItems: 1
+
+ snps,dma-masters:
+ description: |
+ Number of AXI masters supported by the hardware.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+
+ snps,data-width:
+ description: |
+ AXI data width supported by hardware.
+ (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6]
+
+ snps,priority:
+ description: |
+ Channel priority specifier associated with the DMA channels.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+
+ snps,block-size:
+ description: |
+ Channel block size specifier associated with the DMA channels.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+
+ snps,axi-max-burst-len:
+ description: |
+ Restrict master AXI burst length by value specified in this property.
+ If this property is missing the maximum AXI burst length supported by
+ DMAC is used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 256
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - '#dma-cells'
+ - dma-channels
+ - snps,dma-masters
+ - snps,data-width
+ - snps,priority
+ - snps,block-size
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ /* example with snps,dw-axi-dmac */
+ dmac: dma-controller@80000 {
+ compatible = "snps,axi-dma-1.01a";
+ reg = <0x80000 0x400>;
+ clocks = <&core_clk>, <&cfgr_clk>;
+ clock-names = "core-clk", "cfgr-clk";
+ interrupt-parent = <&intc>;
+ interrupts = <27>;
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ snps,dma-masters = <2>;
+ snps,data-width = <3>;
+ snps,block-size = <4096 4096 4096 4096>;
+ snps,priority = <0 1 2 3>;
+ snps,axi-max-burst-len = <16>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
new file mode 100644
index 000000000..e7bf6dd7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-mio-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier Media IO DMA controller
+
+description: |
+ This works as an external DMA engine for SD/eMMC controllers etc.
+ found in UniPhier LD4, Pro4, sLD8 SoCs.
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ const: socionext,uniphier-mio-dmac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: |
+ A list of interrupt specifiers associated with the DMA channels.
+ The number of interrupt lines is SoC-dependent.
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ '#dma-cells':
+ description: The single cell represents the channel index.
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - '#dma-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ // In the example below, "interrupts = <0 68 4>, <0 68 4>, ..." is not a
+ // typo. The first two channels share a single interrupt line.
+
+ dmac: dma-controller@5a000000 {
+ compatible = "socionext,uniphier-mio-dmac";
+ reg = <0x5a000000 0x1000>;
+ interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+ <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+ clocks = <&mio_clk 7>;
+ resets = <&mio_rst 7>;
+ #dma-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
new file mode 100644
index 000000000..371f18773
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/socionext,uniphier-xdmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier external DMA controller
+
+description: |
+ This describes the devicetree bindings for an external DMA engine to perform
+ memory-to-memory or peripheral-to-memory data transfer capable of supporting
+ 16 channels, implemented in Socionext UniPhier SoCs.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ const: socionext,uniphier-xdmac
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ "#dma-cells":
+ const: 2
+ description: |
+ DMA request from clients consists of 2 cells:
+ 1. Channel index
+ 2. Transfer request factor number, If no transfer factor, use 0.
+ The number is SoC-specific, and this should be specified with
+ relation to the device to use the DMA controller.
+
+ dma-channels:
+ minimum: 1
+ maximum: 16
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#dma-cells"
+ - dma-channels
+
+examples:
+ - |
+ xdmac: dma-controller@5fc10000 {
+ compatible = "socionext,uniphier-xdmac";
+ reg = <0x5fc10000 0x5300>;
+ interrupts = <0 188 4>;
+ #dma-cells = <2>;
+ dma-channels = <16>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
new file mode 100644
index 000000000..c7e9b5fd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt
@@ -0,0 +1,44 @@
+* Spreadtrum DMA controller
+
+This binding follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+- compatible: Should be "sprd,sc9860-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel.
+- #dma-cells: must be <1>. Used to represent the number of integer
+ cells in the dmas property of client device.
+- dma-channels : Number of DMA channels supported. Should be 32.
+- clock-names: Should contain the clock of the DMA controller.
+- clocks: Should contain a clock specifier for each entry in clock-names.
+
+Deprecated properties:
+- #dma-channels : Number of DMA channels supported. Should be 32.
+
+Example:
+
+Controller:
+apdma: dma-controller@20100000 {
+ compatible = "sprd,sc9860-dma";
+ reg = <0x20100000 0x4000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ clock-names = "enable";
+ clocks = <&clk_ap_ahb_gates 5>;
+};
+
+
+Client:
+DMA clients connected to the Spreadtrum DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. The slave id.
+
+spi0: spi@70a00000{
+ ...
+ dma-names = "rx_chn", "tx_chn";
+ dmas = <&apdma 11>, <&apdma 12>;
+ ...
+};
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
new file mode 100644
index 000000000..55faab6a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA Controller bindings
+
+description: |
+ The STM32 DMA is a general-purpose direct memory access controller capable of
+ supporting 8 independent DMA channels. Each channel can have up to 8 requests.
+ DMA clients connected to the STM32 DMA controller must use the format
+ described in the dma.txt file, using a four-cell specifier for each
+ channel: a phandle to the DMA controller plus the following four integer cells:
+ 1. The channel id
+ 2. The request line number
+ 3. A 32bit mask specifying the DMA channel configuration which are device
+ dependent:
+ -bit 9: Peripheral Increment Address
+ 0x0: no address increment between transfers
+ 0x1: increment address between transfers
+ -bit 10: Memory Increment Address
+ 0x0: no address increment between transfers
+ 0x1: increment address between transfers
+ -bit 15: Peripheral Increment Offset Size
+ 0x0: offset size is linked to the peripheral bus width
+ 0x1: offset size is fixed to 4 (32-bit alignment)
+ -bit 16-17: Priority level
+ 0x0: low
+ 0x1: medium
+ 0x2: high
+ 0x3: very high
+ 4. A 32bit bitfield value specifying DMA features which are device dependent:
+ -bit 0-1: DMA FIFO threshold selection
+ 0x0: 1/4 full FIFO
+ 0x1: 1/2 full FIFO
+ 0x2: 3/4 full FIFO
+ 0x3: full FIFO
+ -bit 2: DMA direct mode
+ 0x0: FIFO mode with threshold selectable with bit 0-1
+ 0x1: Direct mode: each DMA request immediately initiates a transfer
+ from/to the memory, FIFO is bypassed.
+ -bit 4: alternative DMA request/acknowledge protocol
+ 0x0: Use standard DMA ACK management, where ACK signal is maintained
+ up to the removal of request and transfer completion
+ 0x1: Use alternative DMA ACK management, where ACK de-assertion does
+ not wait for the de-assertion of the REQuest, ACK is only managed
+ by transfer completion. This must only be used on channels
+ managing transfers for STM32 USART/UART.
+
+
+maintainers:
+ - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 4
+
+ compatible:
+ const: st,stm32-dma
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 8
+ description: Should contain all of the per-channel DMA
+ interrupts in ascending order with respect to the
+ DMA channel index.
+
+ resets:
+ maxItems: 1
+
+ st,mem2mem:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: if defined, it indicates that the controller
+ supports memory-to-memory transfer
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ dma-controller@40026400 {
+ compatible = "st,stm32-dma";
+ reg = <0x40026400 0x400>;
+ interrupts = <56>,
+ <57>,
+ <58>,
+ <59>,
+ <60>,
+ <68>,
+ <69>,
+ <70>;
+ clocks = <&clk_hclk>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ resets = <&rcc 150>;
+ dma-requests = <8>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
new file mode 100644
index 000000000..1e1d8549b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 DMA MUX (DMA request router) bindings
+
+maintainers:
+ - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+ - $ref: "dma-router.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 3
+
+ compatible:
+ const: st,stm32h7-dmamux
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - dma-masters
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ dma-router@40020800 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x40020800 0x3c>;
+ #dma-cells = <3>;
+ dma-requests = <128>;
+ dma-channels = <16>;
+ dma-masters = <&dma1>, <&dma2>;
+ clocks = <&timer_clk>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
new file mode 100644
index 000000000..00cfa3913
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 MDMA Controller bindings
+
+description: |
+ The STM32 MDMA is a general-purpose direct memory access controller capable of
+ supporting 64 independent DMA channels with 256 HW requests.
+ DMA clients connected to the STM32 MDMA controller must use the format
+ described in the dma.txt file, using a five-cell specifier for each channel:
+ a phandle to the MDMA controller plus the following five integer cells:
+ 1. The request line number
+ 2. The priority level
+ 0x0: Low
+ 0x1: Medium
+ 0x2: High
+ 0x3: Very high
+ 3. A 32bit mask specifying the DMA channel configuration
+ -bit 0-1: Source increment mode
+ 0x0: Source address pointer is fixed
+ 0x2: Source address pointer is incremented after each data transfer
+ 0x3: Source address pointer is decremented after each data transfer
+ -bit 2-3: Destination increment mode
+ 0x0: Destination address pointer is fixed
+ 0x2: Destination address pointer is incremented after each data transfer
+ 0x3: Destination address pointer is decremented after each data transfer
+ -bit 8-9: Source increment offset size
+ 0x0: byte (8bit)
+ 0x1: half-word (16bit)
+ 0x2: word (32bit)
+ 0x3: double-word (64bit)
+ -bit 10-11: Destination increment offset size
+ 0x0: byte (8bit)
+ 0x1: half-word (16bit)
+ 0x2: word (32bit)
+ 0x3: double-word (64bit)
+ -bit 25-18: The number of bytes to be transferred in a single transfer
+ (min = 1 byte, max = 128 bytes)
+ -bit 29:28: Trigger Mode
+ 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
+ 0x1: Each MDMA request triggers a block transfer (max 64K bytes)
+ 0x2: Each MDMA request triggers a repeated block transfer
+ 0x3: Each MDMA request triggers a linked list transfer
+ 4. A 32bit value specifying the register to be used to acknowledge the request
+ if no HW ack signal is used by the MDMA client
+ 5. A 32bit mask specifying the value to be written to acknowledge the request
+ if no HW ack signal is used by the MDMA client
+
+maintainers:
+ - Amelie Delaunay <amelie.delaunay@foss.st.com>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 5
+
+ compatible:
+ const: st,stm32h7-mdma
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ st,ahb-addr-masks:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: Array of u32 mask to list memory devices addressed via AHB bus.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ #include <dt-bindings/reset/stm32mp1-resets.h>
+ dma-controller@52000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x52000000 0x1000>;
+ interrupts = <122>;
+ clocks = <&timer_clk>;
+ resets = <&rcc 992>;
+ #dma-cells = <5>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ st,ahb-addr-masks = <0x20000000>, <0x00000000>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/st_fdma.txt b/Documentation/devicetree/bindings/dma/st_fdma.txt
new file mode 100644
index 000000000..52cfec9e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/st_fdma.txt
@@ -0,0 +1,86 @@
+* STMicroelectronics Flexible Direct Memory Access Device Tree bindings
+
+The FDMA is a general-purpose direct memory access controller capable of
+supporting 16 independent DMA channels. It accepts up to 32 DMA requests.
+The FDMA is based on a Slim processor which requires a firmware.
+
+* FDMA Controller
+
+Required properties:
+- compatible : Should be one of
+ - st,stih407-fdma-mpe31-11, "st,slim-rproc";
+ - st,stih407-fdma-mpe31-12, "st,slim-rproc";
+ - st,stih407-fdma-mpe31-13, "st,slim-rproc";
+- reg : Should contain an entry for each name in reg-names
+- reg-names : Must contain "slimcore", "dmem", "peripherals", "imem" entries
+- interrupts : Should contain one interrupt shared by all channels
+- dma-channels : Number of channels supported by the controller
+- #dma-cells : Must be <3>. See DMA client section below
+- clocks : Must contain an entry for each clock
+See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Example:
+
+ fdma0: dma-controller@8e20000 {
+ compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
+ reg = <0x8e20000 0x8000>,
+ <0x8e30000 0x3000>,
+ <0x8e37000 0x1000>,
+ <0x8e38000 0x8000>;
+ reg-names = "slimcore", "dmem", "peripherals", "imem";
+ clocks = <&clk_s_c0_flexgen CLK_FDMA>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>;
+ dma-channels = <16>;
+ #dma-cells = <3>;
+ };
+
+* DMA client
+
+Required properties:
+- dmas: Comma separated list of dma channel requests
+- dma-names: Names of the aforementioned requested channels
+
+Each dmas request consists of 4 cells:
+1. A phandle pointing to the FDMA controller
+2. The request line number
+3. A 32bit mask specifying (see include/linux/platform_data/dma-st-fdma.h)
+ -bit 2-0: Holdoff value, dreq will be masked for
+ 0x0: 0-0.5us
+ 0x1: 0.5-1us
+ 0x2: 1-1.5us
+ -bit 17: data swap
+ 0x0: disabled
+ 0x1: enabled
+ -bit 21: Increment Address
+ 0x0: no address increment between transfers
+ 0x1: increment address between transfers
+ -bit 22: 2 STBus Initiator Coprocessor interface
+ 0x0: high priority port
+ 0x1: low priority port
+4. transfers type
+ 0 free running
+ 1 paced
+
+Example:
+
+ sti_uni_player2: sti-uni-player@2 {
+ compatible = "st,sti-uni-player";
+ #sound-dai-cells = <0>;
+ st,syscfg = <&syscfg_core>;
+ clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+ assigned-clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
+ assigned-clock-parents = <&clk_s_d0_quadfs 2>;
+ assigned-clock-rates = <50000000>;
+ reg = <0x8D82000 0x158>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
+ dmas = <&fdma0 4 0 1>;
+ dai-name = "Uni Player #1 (DAC)";
+ dma-names = "tx";
+ st,uniperiph-id = <2>;
+ st,version = <5>;
+ st,mode = "PCM";
+ };
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
new file mode 100644
index 000000000..8bddfb3b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DMA40 DMA Engine
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 3
+ description: |
+ The first cell is the unique device channel number as indicated by this
+ table for DB8500 which is the only ASIC known to use DMA40:
+
+ 0: SPI controller 0
+ 1: SD/MMC controller 0 (unused)
+ 2: SD/MMC controller 1 (unused)
+ 3: SD/MMC controller 2 (unused)
+ 4: I2C port 1
+ 5: I2C port 3
+ 6: I2C port 2
+ 7: I2C port 4
+ 8: Synchronous Serial Port SSP0
+ 9: Synchronous Serial Port SSP1
+ 10: Multi-Channel Display Engine MCDE RX
+ 11: UART port 2
+ 12: UART port 1
+ 13: UART port 0
+ 14: Multirate Serial Port MSP2
+ 15: I2C port 0
+ 16: USB OTG in/out endpoints 7 & 15
+ 17: USB OTG in/out endpoints 6 & 14
+ 18: USB OTG in/out endpoints 5 & 13
+ 19: USB OTG in/out endpoints 4 & 12
+ 20: SLIMbus or HSI channel 0
+ 21: SLIMbus or HSI channel 1
+ 22: SLIMbus or HSI channel 2
+ 23: SLIMbus or HSI channel 3
+ 24: Multimedia DSP SXA0
+ 25: Multimedia DSP SXA1
+ 26: Multimedia DSP SXA2
+ 27: Multimedia DSP SXA3
+ 28: SD/MMC controller 2
+ 29: SD/MMC controller 0
+ 30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+ 31: MSP port 0 or SLIMbus channel 0
+ 32: SD/MMC controller 1
+ 33: SPI controller 2
+ 34: i2c3 RX2 TX2
+ 35: SPI controller 1
+ 36: USB OTG in/out endpoints 3 & 11
+ 37: USB OTG in/out endpoints 2 & 10
+ 38: USB OTG in/out endpoints 1 & 9
+ 39: USB OTG in/out endpoints 8
+ 40: SPI controller 3
+ 41: SD/MMC controller 3
+ 42: SD/MMC controller 4
+ 43: SD/MMC controller 5
+ 44: Multimedia DSP SXA4
+ 45: Multimedia DSP SXA5
+ 46: SLIMbus channel 8 or Multimedia DSP SXA6
+ 47: SLIMbus channel 9 or Multimedia DSP SXA7
+ 48: Crypto Accelerator 1
+ 49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+ 50: Hash Accelerator 1 TX
+ 51: memcpy TX (to be used by the DMA driver for memcpy operations)
+ 52: SLIMbus or HSI channel 4
+ 53: SLIMbus or HSI channel 5
+ 54: SLIMbus or HSI channel 6
+ 55: SLIMbus or HSI channel 7
+ 56: memcpy (to be used by the DMA driver for memcpy operations)
+ 57: memcpy (to be used by the DMA driver for memcpy operations)
+ 58: memcpy (to be used by the DMA driver for memcpy operations)
+ 59: memcpy (to be used by the DMA driver for memcpy operations)
+ 60: memcpy (to be used by the DMA driver for memcpy operations)
+ 61: Crypto Accelerator 0
+ 62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+ 63: Hash Accelerator 0 TX
+
+ The second cell is the DMA request line number. This is only used when
+ a fixed channel is allocated, and indicated by setting bit 3 in the
+ flags field (see below).
+
+ The third cell is a 32bit flags bitfield with the following possible
+ bits set:
+ 0x00000001 (bit 0) - mode:
+ Logical channel when unset
+ Physical channel when set
+ 0x00000002 (bit 1) - direction:
+ Memory to Device when unset
+ Device to Memory when set
+ 0x00000004 (bit 2) - endianness:
+ Little endian when unset
+ Big endian when set
+ 0x00000008 (bit 3) - use fixed channel:
+ Use automatic channel selection when unset
+ Use DMA request line number when set
+ 0x00000010 (bit 4) - set channel as high priority:
+ Normal priority when unset
+ High priority when set
+
+ compatible:
+ items:
+ - const: stericsson,db8500-dma40
+ - const: stericsson,dma40
+
+ reg:
+ items:
+ - description: DMA40 memory base
+ - description: LCPA memory base
+
+ reg-names:
+ items:
+ - const: base
+ - const: lcpa
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ memcpy-channels:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: Array of u32 elements indicating which channels on the DMA
+ engine are elegible for memcpy transfers
+
+required:
+ - "#dma-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - memcpy-channels
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/mfd/dbx500-prcmu.h>
+ dma-controller@801C0000 {
+ compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+ reg = <0x801C0000 0x1000>, <0x40010000 0x800>;
+ reg-names = "base", "lcpa";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <3>;
+ memcpy-channels = <56 57 58 59 60>;
+ clocks = <&prcmu_clk PRCMU_DMACLK>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
new file mode 100644
index 000000000..47e477cce
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
@@ -0,0 +1,68 @@
+Texas Instruments DMA Crossbar (DMA request router)
+
+Required properties:
+- compatible: "ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
+ "ti,am335x-edma-crossbar" for AM335x and AM437x
+- reg: Memory map for accessing module
+- #dma-cells: Should be set to match with the DMA controller's dma-cells
+ for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar.
+- dma-requests: Number of DMA requests the crossbar can receive
+- dma-masters: phandle pointing to the DMA controller
+
+The DMA controller node need to have the following poroperties:
+- dma-requests: Number of DMA requests the controller can handle
+
+Optional properties:
+- ti,dma-safe-map: Safe routing value for unused request lines
+- ti,reserved-dma-request-ranges: DMA request ranges which should not be used
+ when mapping xbar input to DMA request, they are either
+ allocated to be used by for example the DSP or they are used as
+ memcpy channels in eDMA.
+
+Notes:
+When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request
+the DMA event number as crossbar ID (input to the DMA crossbar).
+
+For ti,am335x-edma-crossbar: the meaning of parameters of dmas for clients:
+dmas = <&edma_xbar 12 0 1>; where <12> is the DMA request number, <0> is the TC
+the event should be assigned and <1> is the mux selection for in the crossbar.
+When mux 0 is used the DMA channel can be requested directly from edma node.
+
+Example:
+
+/* DMA controller */
+sdma: dma-controller@4a056000 {
+ compatible = "ti,omap4430-sdma";
+ reg = <0x4a056000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <32>;
+ dma-requests = <127>;
+};
+
+/* DMA crossbar */
+sdma_xbar: dma-router@4a002b78 {
+ compatible = "ti,dra7-dma-crossbar";
+ reg = <0x4a002b78 0xfc>;
+ #dma-cells = <1>;
+ dma-requests = <205>;
+ ti,dma-safe-map = <0>;
+ /* Protect the sDMA request ranges: 10-14 and 100-126 */
+ ti,reserved-dma-request-ranges = <10 5>, <100 27>;
+ dma-masters = <&sdma>;
+};
+
+/* DMA client */
+uart1: serial@4806a000 {
+ compatible = "ti,omap4-uart";
+ reg = <0x4806a000 0x100>;
+ interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "uart1";
+ clock-frequency = <48000000>;
+ /* Requesting crossbar input 49 and 50 */
+ dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
new file mode 100644
index 000000000..f719e1612
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -0,0 +1,238 @@
+Texas Instruments eDMA
+
+The eDMA3 consists of two components: Channel controller (CC) and Transfer
+Controller(s) (TC). The CC is the main entry for DMA users since it is
+responsible for the DMA channel handling, while the TCs are responsible to
+execute the actual DMA tansfer.
+
+------------------------------------------------------------------------------
+eDMA3 Channel Controller
+
+Required properties:
+--------------------
+- compatible: Should be:
+ - "ti,edma3-tpcc" for the channel controller(s) on OMAP,
+ AM33xx and AM43xx SoCs.
+ - "ti,k2g-edma3-tpcc", "ti,edma3-tpcc" for the
+ channel controller(s) on 66AK2G.
+- #dma-cells: Should be set to <2>. The first number is the DMA request
+ number and the second is the TC the channel is serviced on.
+- reg: Memory map of eDMA CC
+- reg-names: "edma3_cc"
+- interrupts: Interrupt lines for CCINT, MPERR and CCERRINT.
+- interrupt-names: "edma3_ccint", "edma3_mperr" and "edma3_ccerrint"
+- ti,tptcs: List of TPTCs associated with the eDMA in the following form:
+ <&tptc_phandle TC_priority_number>. The highest priority is 0.
+
+SoC-specific Required properties:
+--------------------------------
+The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
+- ti,hwmods: Name of the hwmods associated to the eDMA CC.
+
+The following are mandatory properties for 66AK2G SoCs only:
+- power-domains:Should contain a phandle to a PM domain provider node
+ and an args specifier containing the device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+
+Optional properties:
+-------------------
+- ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
+ these channels will be SW triggered channels. See example.
+- ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
+ the driver, they are allocated to be used by for example the
+ DSP. See example.
+- dma-channel-mask: Mask of usable channels.
+ Single uint32 for EDMA with 32 channels, array of two uint32 for
+ EDMA with 64 channels. See example and
+ Documentation/devicetree/bindings/dma/dma-common.yaml
+
+
+------------------------------------------------------------------------------
+eDMA3 Transfer Controller
+
+Required properties:
+--------------------
+- compatible: Should be:
+ - "ti,edma3-tptc" for the transfer controller(s) on OMAP,
+ AM33xx and AM43xx SoCs.
+ - "ti,k2g-edma3-tptc", "ti,edma3-tptc" for the
+ transfer controller(s) on 66AK2G.
+- reg: Memory map of eDMA TC
+- interrupts: Interrupt number for TCerrint.
+
+SoC-specific Required properties:
+--------------------------------
+The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
+- ti,hwmods: Name of the hwmods associated to the eDMA TC.
+
+The following are mandatory properties for 66AK2G SoCs only:
+- power-domains:Should contain a phandle to a PM domain provider node
+ and an args specifier containing the device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml
+
+Optional properties:
+-------------------
+- interrupt-names: "edma3_tcerrint"
+
+------------------------------------------------------------------------------
+Examples:
+
+1.
+edma: edma@49000000 {
+ compatible = "ti,edma3-tpcc";
+ ti,hwmods = "tpcc";
+ reg = <0x49000000 0x10000>;
+ reg-names = "edma3_cc";
+ interrupts = <12 13 14>;
+ interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 7>, <&edma_tptc2 0>;
+
+ /* Channel 20 and 21 is allocated for memcpy */
+ ti,edma-memcpy-channels = <20 21>;
+ /* The following PaRAM slots are reserved: 35-44 and 100-109 */
+ ti,edma-reserved-slot-ranges = <35 10>, <100 10>;
+ /* The following channels are reserved: 35-44 */
+ dma-channel-mask = <0xffffffff /* Channel 0-31 */
+ 0xffffe007>; /* Channel 32-63 */
+};
+
+edma_tptc0: tptc@49800000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc0";
+ reg = <0x49800000 0x100000>;
+ interrupts = <112>;
+ interrupt-names = "edm3_tcerrint";
+};
+
+edma_tptc1: tptc@49900000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc1";
+ reg = <0x49900000 0x100000>;
+ interrupts = <113>;
+ interrupt-names = "edm3_tcerrint";
+};
+
+edma_tptc2: tptc@49a00000 {
+ compatible = "ti,edma3-tptc";
+ ti,hwmods = "tptc2";
+ reg = <0x49a00000 0x100000>;
+ interrupts = <114>;
+ interrupt-names = "edm3_tcerrint";
+};
+
+sham: sham@53100000 {
+ compatible = "ti,omap4-sham";
+ ti,hwmods = "sham";
+ reg = <0x53100000 0x200>;
+ interrupts = <109>;
+ /* DMA channel 36 executed on eDMA TC0 - low priority queue */
+ dmas = <&edma 36 0>;
+ dma-names = "rx";
+};
+
+mcasp0: mcasp@48038000 {
+ compatible = "ti,am33xx-mcasp-audio";
+ ti,hwmods = "mcasp0";
+ reg = <0x48038000 0x2000>,
+ <0x46000000 0x400000>;
+ reg-names = "mpu", "dat";
+ interrupts = <80>, <81>;
+ interrupt-names = "tx", "rx";
+ /* DMA channels 8 and 9 executed on eDMA TC2 - high priority queue */
+ dmas = <&edma 8 2>,
+ <&edma 9 2>;
+ dma-names = "tx", "rx";
+};
+
+2.
+edma1: edma@2728000 {
+ compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
+ reg = <0x02728000 0x8000>;
+ reg-names = "edma3_cc";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "edma3_ccint", "emda3_mperr",
+ "edma3_ccerrint";
+ dma-requests = <64>;
+ #dma-cells = <2>;
+
+ ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
+
+ /*
+ * memcpy is disabled, can be enabled with:
+ * ti,edma-memcpy-channels = <12 13 14 15>;
+ * for example.
+ */
+
+ power-domains = <&k2g_pds 0x4f>;
+};
+
+edma1_tptc0: tptc@27b0000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x027b0000 0x400>;
+ power-domains = <&k2g_pds 0x4f>;
+};
+
+edma1_tptc1: tptc@27b8000 {
+ compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
+ reg = <0x027b8000 0x400>;
+ power-domains = <&k2g_pds 0x4f>;
+};
+
+mmc0: mmc@23000000 {
+ compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
+ reg = <0x23000000 0x400>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
+ dmas = <&edma1 24 0>, <&edma1 25 0>;
+ dma-names = "tx", "rx";
+ bus-width = <4>;
+ ti,needs-special-reset;
+ no-1-8-v;
+ max-frequency = <96000000>;
+ power-domains = <&k2g_pds 0xb>;
+ clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
+ clock-names = "fck", "mmchsdb_fck";
+};
+
+------------------------------------------------------------------------------
+DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc
+binding.
+
+Required properties:
+- compatible : "ti,edma3"
+- #dma-cells: Should be set to <1>
+ Clients should use a single channel number per DMA request.
+- reg: Memory map for accessing module
+- interrupts: Exactly 3 interrupts need to be specified in the order:
+ 1. Transfer completion interrupt.
+ 2. Memory protection interrupt.
+ 3. Error interrupt.
+Optional properties:
+- ti,hwmods: Name of the hwmods associated to the EDMA
+- ti,edma-xbar-event-map: Crossbar event to channel map
+
+Deprecated properties:
+Listed here in case one wants to boot an old kernel with new DTB. These
+properties might need to be added to the new DTS files.
+- ti,edma-regions: Number of regions
+- ti,edma-slots: Number of slots
+- dma-channels: Specify total DMA channels per CC
+
+Example:
+
+edma: edma@49000000 {
+ reg = <0x49000000 0x10000>;
+ interrupt-parent = <&intc>;
+ interrupts = <12 13 14>;
+ compatible = "ti,edma3";
+ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+ #dma-cells = <1>;
+ ti,edma-xbar-event-map = /bits/ 16 <1 12
+ 2 13>;
+};
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
new file mode 100644
index 000000000..08627d91e
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings
+
+maintainers:
+ - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+ The Block Copy DMA (BCDMA) is intended to perform similar functions as the TR
+ mode channels of K3 UDMA-P.
+ BCDMA includes block copy channels and Split channels.
+
+ Block copy channels mainly used for memory to memory transfers, but with
+ optional triggers a block copy channel can service peripherals by accessing
+ directly to memory mapped registers or area.
+
+ Split channels can be used to service PSI-L based peripherals.
+ The peripherals can be PSI-L native or legacy, non PSI-L native peripherals
+ with PDMAs. PDMA is tasked to act as a bridge between the PSI-L fabric and the
+ legacy peripheral.
+
+ PDMAs can be configured via BCDMA split channel's peer registers to match with
+ the configuration of the legacy peripheral.
+
+allOf:
+ - $ref: /schemas/dma/dma-controller.yaml#
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+ compatible:
+ const: ti,am64-dmss-bcdma
+
+ "#dma-cells":
+ const: 3
+ description: |
+ cell 1: type of the BCDMA channel to be used to service the peripheral:
+ 0 - split channel
+ 1 - block copy channel using global trigger 1
+ 2 - block copy channel using global trigger 2
+ 3 - block copy channel using local trigger
+
+ cell 2: parameter for the channel:
+ if cell 1 is 0 (split channel):
+ PSI-L thread ID of the remote (to BCDMA) end.
+ Valid ranges for thread ID depends on the data movement direction:
+ for source thread IDs (rx): 0 - 0x7fff
+ for destination thread IDs (tx): 0x8000 - 0xffff
+
+ Please refer to the device documentation for the PSI-L thread map and
+ also the PSI-L peripheral chapter for the correct thread ID.
+ if cell 1 is 1 or 2 (block copy channel using global trigger):
+ Unused, ignored
+
+ The trigger must be configured for the channel externally to BCDMA,
+ channels using global triggers should not be requested directly, but
+ via DMA event router.
+ if cell 1 is 3 (block copy channel using local trigger):
+ bchan number of the locally triggered channel
+
+ cell 3: ASEL value for the channel
+
+ reg:
+ maxItems: 5
+
+ reg-names:
+ items:
+ - const: gcfg
+ - const: bchanrt
+ - const: rchanrt
+ - const: tchanrt
+ - const: ringrt
+
+ msi-parent: true
+
+ ti,asel:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: ASEL value for non slave channels
+
+ ti,sci-rm-range-bchan:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Array of BCDMA block-copy channel resource subtypes for resource
+ allocation for this host
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+ items:
+ maximum: 0x3f
+
+ ti,sci-rm-range-tchan:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Array of BCDMA split tx channel resource subtypes for resource allocation
+ for this host
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+ items:
+ maximum: 0x3f
+
+ ti,sci-rm-range-rchan:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Array of BCDMA split rx channel resource subtypes for resource allocation
+ for this host
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+ items:
+ maximum: 0x3f
+
+required:
+ - compatible
+ - "#dma-cells"
+ - reg
+ - reg-names
+ - msi-parent
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,sci-rm-range-bchan
+ - ti,sci-rm-range-tchan
+ - ti,sci-rm-range-rchan
+
+unevaluatedProperties: false
+
+examples:
+ - |+
+ cbass_main {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ main_dmss {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges;
+ ranges;
+
+ ti,sci-dev-id = <25>;
+
+ main_bcdma: dma-controller@485c0100 {
+ compatible = "ti,am64-dmss-bcdma";
+
+ reg = <0x0 0x485c0100 0x0 0x100>,
+ <0x0 0x4c000000 0x0 0x20000>,
+ <0x0 0x4a820000 0x0 0x20000>,
+ <0x0 0x4aa40000 0x0 0x20000>,
+ <0x0 0x4bc00000 0x0 0x100000>;
+ reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt";
+ msi-parent = <&inta_main_dmss>;
+ #dma-cells = <3>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <26>;
+
+ ti,sci-rm-range-bchan = <0x20>; /* BLOCK_COPY_CHAN */
+ ti,sci-rm-range-rchan = <0x21>; /* SPLIT_TR_RX_CHAN */
+ ti,sci-rm-range-tchan = <0x22>; /* SPLIT_TR_TX_CHAN */
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
new file mode 100644
index 000000000..507d16d84
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-pktdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 DMSS PKTDMA Device Tree Bindings
+
+maintainers:
+ - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+ The Packet DMA (PKTDMA) is intended to perform similar functions as the packet
+ mode channels of K3 UDMA-P.
+ PKTDMA only includes Split channels to service PSI-L based peripherals.
+
+ The peripherals can be PSI-L native or legacy, non PSI-L native peripherals
+ with PDMAs. PDMA is tasked to act as a bridge between the PSI-L fabric and the
+ legacy peripheral.
+
+ PDMAs can be configured via PKTDMA split channel's peer registers to match
+ with the configuration of the legacy peripheral.
+
+allOf:
+ - $ref: /schemas/dma/dma-controller.yaml#
+ - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+properties:
+ compatible:
+ const: ti,am64-dmss-pktdma
+
+ "#dma-cells":
+ const: 2
+ description: |
+ The first cell is the PSI-L thread ID of the remote (to PKTDMA) end.
+ Valid ranges for thread ID depends on the data movement direction:
+ for source thread IDs (rx): 0 - 0x7fff
+ for destination thread IDs (tx): 0x8000 - 0xffff
+
+ Please refer to the device documentation for the PSI-L thread map and also
+ the PSI-L peripheral chapter for the correct thread ID.
+
+ The second cell is the ASEL value for the channel
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: gcfg
+ - const: rchanrt
+ - const: tchanrt
+ - const: ringrt
+
+ msi-parent: true
+
+ ti,sci-rm-range-tchan:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Array of PKTDMA split tx channel resource subtypes for resource allocation
+ for this host
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+ items:
+ maximum: 0x3f
+
+ ti,sci-rm-range-tflow:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Array of PKTDMA split tx flow resource subtypes for resource allocation
+ for this host
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+ items:
+ maximum: 0x3f
+
+ ti,sci-rm-range-rchan:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Array of PKTDMA split rx channel resource subtypes for resource allocation
+ for this host
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+ items:
+ maximum: 0x3f
+
+ ti,sci-rm-range-rflow:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Array of PKTDMA split rx flow resource subtypes for resource allocation
+ for this host
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+ items:
+ maximum: 0x3f
+
+required:
+ - compatible
+ - "#dma-cells"
+ - reg
+ - reg-names
+ - msi-parent
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,sci-rm-range-tchan
+ - ti,sci-rm-range-tflow
+ - ti,sci-rm-range-rchan
+ - ti,sci-rm-range-rflow
+
+unevaluatedProperties: false
+
+examples:
+ - |+
+ cbass_main {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ main_dmss {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-ranges;
+ ranges;
+
+ ti,sci-dev-id = <25>;
+
+ main_pktdma: dma-controller@485c0000 {
+ compatible = "ti,am64-dmss-pktdma";
+
+ reg = <0x0 0x485c0000 0x0 0x100>,
+ <0x0 0x4a800000 0x0 0x20000>,
+ <0x0 0x4aa00000 0x0 0x40000>,
+ <0x0 0x4b800000 0x0 0x400000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt";
+ msi-parent = <&inta_main_dmss>;
+ #dma-cells = <2>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <30>;
+
+ ti,sci-rm-range-tchan = <0x23>, /* UNMAPPED_TX_CHAN */
+ <0x24>, /* CPSW_TX_CHAN */
+ <0x25>, /* SAUL_TX_0_CHAN */
+ <0x26>, /* SAUL_TX_1_CHAN */
+ <0x27>, /* ICSSG_0_TX_CHAN */
+ <0x28>; /* ICSSG_1_TX_CHAN */
+ ti,sci-rm-range-tflow = <0x10>, /* RING_UNMAPPED_TX_CHAN */
+ <0x11>, /* RING_CPSW_TX_CHAN */
+ <0x12>, /* RING_SAUL_TX_0_CHAN */
+ <0x13>, /* RING_SAUL_TX_1_CHAN */
+ <0x14>, /* RING_ICSSG_0_TX_CHAN */
+ <0x15>; /* RING_ICSSG_1_TX_CHAN */
+ ti,sci-rm-range-rchan = <0x29>, /* UNMAPPED_RX_CHAN */
+ <0x2b>, /* CPSW_RX_CHAN */
+ <0x2d>, /* SAUL_RX_0_CHAN */
+ <0x2f>, /* SAUL_RX_1_CHAN */
+ <0x31>, /* SAUL_RX_2_CHAN */
+ <0x33>, /* SAUL_RX_3_CHAN */
+ <0x35>, /* ICSSG_0_RX_CHAN */
+ <0x37>; /* ICSSG_1_RX_CHAN */
+ ti,sci-rm-range-rflow = <0x2a>, /* FLOW_UNMAPPED_RX_CHAN */
+ <0x2c>, /* FLOW_CPSW_RX_CHAN */
+ <0x2e>, /* FLOW_SAUL_RX_0/1_CHAN */
+ <0x32>, /* FLOW_SAUL_RX_2/3_CHAN */
+ <0x36>, /* FLOW_ICSSG_0_RX_CHAN */
+ <0x38>; /* FLOW_ICSSG_1_RX_CHAN */
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
new file mode 100644
index 000000000..6a09bbf83
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated
+# Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings
+
+maintainers:
+ - Peter Ujfalusi <peter.ujfalusi@gmail.com>
+
+description: |
+ The UDMA-P is intended to perform similar (but significantly upgraded)
+ functions as the packet-oriented DMA used on previous SoC devices. The UDMA-P
+ module supports the transmission and reception of various packet types.
+ The UDMA-P architecture facilitates the segmentation and reassembly of SoC DMA
+ data structure compliant packets to/from smaller data blocks that are natively
+ compatible with the specific requirements of each connected peripheral.
+ Multiple Tx and Rx channels are provided within the DMA which allow multiple
+ segmentation or reassembly operations to be ongoing. The DMA controller
+ maintains state information for each of the channels which allows packet
+ segmentation and reassembly operations to be time division multiplexed between
+ channels in order to share the underlying DMA hardware. An external DMA
+ scheduler is used to control the ordering and rate at which this multiplexing
+ occurs for Transmit operations. The ordering and rate of Receive operations
+ is indirectly controlled by the order in which blocks are pushed into the DMA
+ on the Rx PSI-L interface.
+
+ The UDMA-P also supports acting as both a UTC and UDMA-C for its internal
+ channels. Channels in the UDMA-P can be configured to be either Packet-Based
+ or Third-Party channels on a channel by channel basis.
+
+ All transfers within NAVSS is done between PSI-L source and destination
+ threads.
+ The peripherals serviced by UDMA can be PSI-L native (sa2ul, cpsw, etc) or
+ legacy, non PSI-L native peripherals. In the later case a special, small PDMA
+ is tasked to act as a bridge between the PSI-L fabric and the legacy
+ peripheral.
+
+ PDMAs can be configured via UDMAP peer registers to match with the
+ configuration of the legacy peripheral.
+
+allOf:
+ - $ref: "../dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ minimum: 1
+ maximum: 2
+ description: |
+ The cell is the PSI-L thread ID of the remote (to UDMAP) end.
+ Valid ranges for thread ID depends on the data movement direction:
+ for source thread IDs (rx): 0 - 0x7fff
+ for destination thread IDs (tx): 0x8000 - 0xffff
+
+ Please refer to the device documentation for the PSI-L thread map and also
+ the PSI-L peripheral chapter for the correct thread ID.
+
+ When #dma-cells is 2, the second parameter is the channel ATYPE.
+
+ compatible:
+ enum:
+ - ti,am654-navss-main-udmap
+ - ti,am654-navss-mcu-udmap
+ - ti,j721e-navss-main-udmap
+ - ti,j721e-navss-mcu-udmap
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: gcfg
+ - const: rchanrt
+ - const: tchanrt
+
+ msi-parent: true
+
+ ti,sci:
+ description: phandle to TI-SCI compatible System controller node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ ti,sci-dev-id:
+ description: TI-SCI device id of UDMAP
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ ti,ringacc:
+ description: phandle to the ring accelerator node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ ti,sci-rm-range-tchan:
+ description: |
+ Array of UDMA tchan resource subtypes for resource allocation for this
+ host
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+
+ ti,sci-rm-range-rchan:
+ description: |
+ Array of UDMA rchan resource subtypes for resource allocation for this
+ host
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+
+ ti,sci-rm-range-rflow:
+ description: |
+ Array of UDMA rflow resource subtypes for resource allocation for this
+ host
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ # Should be enough
+ maxItems: 255
+
+required:
+ - compatible
+ - "#dma-cells"
+ - reg
+ - reg-names
+ - msi-parent
+ - ti,sci
+ - ti,sci-dev-id
+ - ti,ringacc
+ - ti,sci-rm-range-tchan
+ - ti,sci-rm-range-rchan
+ - ti,sci-rm-range-rflow
+
+if:
+ properties:
+ "#dma-cells":
+ const: 2
+then:
+ properties:
+ ti,udma-atype:
+ description: ATYPE value which should be used by non slave channels
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - ti,udma-atype
+
+unevaluatedProperties: false
+
+examples:
+ - |+
+ cbass_main {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cbass_main_navss: navss@30800000 {
+ compatible = "simple-mfd";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-coherent;
+ dma-ranges;
+ ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;
+
+ ti,sci-dev-id = <118>;
+
+ main_udmap: dma-controller@31150000 {
+ compatible = "ti,am654-navss-main-udmap";
+ reg = <0x0 0x31150000 0x0 0x100>,
+ <0x0 0x34000000 0x0 0x100000>,
+ <0x0 0x35000000 0x0 0x100000>;
+ reg-names = "gcfg", "rchanrt", "tchanrt";
+ #dma-cells = <1>;
+
+ ti,ringacc = <&ringacc>;
+
+ msi-parent = <&inta_main_udmass>;
+
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <188>;
+
+ ti,sci-rm-range-tchan = <0x1>, /* TX_HCHAN */
+ <0x2>; /* TX_CHAN */
+ ti,sci-rm-range-rchan = <0x4>, /* RX_HCHAN */
+ <0x5>; /* RX_CHAN */
+ ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
new file mode 100644
index 000000000..d1700a5c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -0,0 +1,128 @@
+Xilinx AXI VDMA engine, it does transfers between memory and video devices.
+It can be configured to have one channel or two channels. If configured
+as two channels, one is to transmit to the video device and another is
+to receive from the video device.
+
+Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
+target devices. It can be configured to have one channel or two channels.
+If configured as two channels, one is to transmit to the device and another
+is to receive from the device.
+
+Xilinx AXI CDMA engine, it does transfers between memory-mapped source
+address and a memory-mapped destination address.
+
+Xilinx AXI MCDMA engine, it does transfer between memory and AXI4 stream
+target devices. It can be configured to have up to 16 independent transmit
+and receive channels.
+
+Required properties:
+- compatible: Should be one of-
+ "xlnx,axi-vdma-1.00.a"
+ "xlnx,axi-dma-1.00.a"
+ "xlnx,axi-cdma-1.00.a"
+ "xlnx,axi-mcdma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain VDMA registers location and length.
+- xlnx,addrwidth: Should be the vdma addressing size in bits(ex: 32 bits).
+- dma-ranges: Should be as the following <dma_addr cpu_addr max_len>.
+- dma-channel child node: Should have at least one channel and can have up to
+ two channels per device. This node specifies the properties of each
+ DMA channel (see child node properties below).
+- clocks: Input clock specifier. Refer to common clock bindings.
+- clock-names: List of input clocks
+ For VDMA:
+ Required elements: "s_axi_lite_aclk"
+ Optional elements: "m_axi_mm2s_aclk" "m_axi_s2mm_aclk",
+ "m_axis_mm2s_aclk", "s_axis_s2mm_aclk"
+ For CDMA:
+ Required elements: "s_axi_lite_aclk", "m_axi_aclk"
+ For AXIDMA and MCDMA:
+ Required elements: "s_axi_lite_aclk"
+ Optional elements: "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+ "m_axi_sg_aclk"
+
+Required properties for VDMA:
+- xlnx,num-fstores: Should be the number of framebuffers as configured in h/w.
+
+Optional properties for AXI DMA and MCDMA:
+- xlnx,sg-length-width: Should be set to the width in bits of the length
+ register as configured in h/w. Takes values {8...26}. If the property
+ is missing or invalid then the default value 23 is used. This is the
+ maximum value that is supported by all IP versions.
+Optional properties for VDMA:
+- xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
+ It takes following values:
+ {1}, flush both channels
+ {2}, flush mm2s channel
+ {3}, flush s2mm channel
+
+Required child node properties:
+- compatible:
+ For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or
+ "xlnx,axi-vdma-s2mm-channel".
+ For CDMA: It should be "xlnx,axi-cdma-channel".
+ For AXIDMA and MCDMA: It should be either "xlnx,axi-dma-mm2s-channel"
+ or "xlnx,axi-dma-s2mm-channel".
+- interrupts: Should contain per channel VDMA interrupts.
+- xlnx,datawidth: Should contain the stream data width, take values
+ {32,64...1024}.
+
+Optional child node properties:
+- xlnx,include-dre: Tells hardware is configured for Data
+ Realignment Engine.
+Optional child node properties for VDMA:
+- xlnx,genlock-mode: Tells Genlock synchronization is
+ enabled/disabled in hardware.
+- xlnx,enable-vert-flip: Tells vertical flip is
+ enabled/disabled in hardware(S2MM path).
+Optional child node properties for MCDMA:
+- dma-channels: Number of dma channels in child node.
+
+Example:
+++++++++
+
+axi_vdma_0: axivdma@40030000 {
+ compatible = "xlnx,axi-vdma-1.00.a";
+ #dma_cells = <1>;
+ reg = < 0x40030000 0x10000 >;
+ dma-ranges = <0x00000000 0x00000000 0x40000000>;
+ xlnx,num-fstores = <0x8>;
+ xlnx,flush-fsync = <0x1>;
+ xlnx,addrwidth = <0x20>;
+ clocks = <&clk 0>, <&clk 1>, <&clk 2>, <&clk 3>, <&clk 4>;
+ clock-names = "s_axi_lite_aclk", "m_axi_mm2s_aclk", "m_axi_s2mm_aclk",
+ "m_axis_mm2s_aclk", "s_axis_s2mm_aclk";
+ dma-channel@40030000 {
+ compatible = "xlnx,axi-vdma-mm2s-channel";
+ interrupts = < 0 54 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+ dma-channel@40030030 {
+ compatible = "xlnx,axi-vdma-s2mm-channel";
+ interrupts = < 0 53 4 >;
+ xlnx,datawidth = <0x40>;
+ } ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
+ where Channel ID is '0' for write/tx and '1' for read/rx
+ channel. For MCMDA, MM2S channel(write/tx) ID start from
+ '0' and is in [0-15] range. S2MM channel(read/rx) ID start
+ from '16' and is in [16-31] range. These channels ID are
+ fixed irrespective of IP configuration.
+
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+vdmatest_0: vdmatest@0 {
+ compatible ="xlnx,axi-vdma-test-1.00.a";
+ dmas = <&axi_vdma_0 0
+ &axi_vdma_0 1>;
+ dma-names = "vdma0", "vdma1";
+} ;
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
new file mode 100644
index 000000000..c0a1408b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DMA Engine
+
+description: |
+ The Xilinx ZynqMP DMA engine supports memory to memory transfers,
+ memory to device and device to memory transfers. It also has flow
+ control and rate control support for slave/peripheral dma access.
+
+maintainers:
+ - Michael Tretter <m.tretter@pengutronix.de>
+
+allOf:
+ - $ref: "../dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 1
+
+ compatible:
+ const: xlnx,zynqmp-dma-1.0
+
+ reg:
+ description: memory map for gdma/adma module access
+ maxItems: 1
+
+ interrupts:
+ description: DMA channel interrupt
+ maxItems: 1
+
+ clocks:
+ description: input clocks
+ minItems: 2
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: clk_main
+ - const: clk_apb
+
+ xlnx,bus-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 64
+ - 128
+ description: AXI bus width in bits
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ dma-coherent:
+ description: present if dma operations are coherent
+
+required:
+ - "#dma-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
+ fpd_dma_chan1: dma-controller@fd500000 {
+ compatible = "xlnx,zynqmp-dma-1.0";
+ reg = <0xfd500000 0x1000>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 117 0x4>;
+ #dma-cells = <1>;
+ clock-names = "clk_main", "clk_apb";
+ clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+ xlnx,bus-width = <128>;
+ dma-coherent;
+ };
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
new file mode 100644
index 000000000..2a595b18f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DisplayPort DMA Controller Device Tree Bindings
+
+description: |
+ These bindings describe the DMA engine included in the Xilinx ZynqMP
+ DisplayPort Subsystem. The DMA engine supports up to 6 DMA channels (3
+ channels for a video stream, 1 channel for a graphics stream, and 2 channels
+ for an audio stream).
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+ - $ref: "../dma-controller.yaml#"
+
+properties:
+ "#dma-cells":
+ const: 1
+ description: |
+ The cell is the DMA channel ID (see dt-bindings/dma/xlnx-zynqmp-dpdma.h
+ for a list of channel IDs).
+
+ compatible:
+ const: xlnx,zynqmp-dpdma
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ description: The AXI clock
+ maxItems: 1
+
+ clock-names:
+ const: axi_clk
+
+required:
+ - "#dma-cells"
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ dma: dma-controller@fd4c0000 {
+ compatible = "xlnx,zynqmp-dpdma";
+ reg = <0xfd4c0000 0x1000>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&dpdma_clk>;
+ clock-names = "axi_clk";
+ #dma-cells = <1>;
+ };
+
+...