summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/gnss/sirfstar.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/gnss/sirfstar.yaml')
-rw-r--r--Documentation/devicetree/bindings/gnss/sirfstar.yaml76
1 files changed, 76 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
new file mode 100644
index 000000000..0bbe684d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/sirfstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiRFstar GNSS Receiver
+
+maintainers:
+ - Johan Hovold <johan@kernel.org>
+
+description:
+ The SiRFstar GNSS receivers have incarnated over the years in different
+ chips, starting from the SiRFstarIII which was a chip that was introduced in
+ 2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired
+ by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was
+ acquired by Samsung, while some products remained with CSR. In 2014 CSR
+ was acquired by Qualcomm who still sell some of the SiRF products.
+
+ SiRF chips can be used over UART, I2C or SPI buses.
+
+allOf:
+ - $ref: gnss-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - csr,gsd4t
+ - csr,csrg05ta03-icje-r
+ - fastrax,uc430
+ - linx,r4
+ - wi2wi,w2sg0004
+ - wi2wi,w2sg0008i
+ - wi2wi,w2sg0084i
+
+ reg:
+ description:
+ The I2C Address, SPI chip select address. Not required on UART buses.
+
+ vcc-supply:
+ description:
+ Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
+
+ reset-gpios:
+ maxItems: 1
+ description: An optional active low reset line, should be flagged with
+ GPIO_ACTIVE_LOW.
+
+ sirf,onoff-gpios:
+ maxItems: 1
+ description: GPIO used to power on and off device, pin name ON_OFF.
+
+ sirf,wakeup-gpios:
+ maxItems: 1
+ description: GPIO used to determine device power state, pin names such
+ as RFPWRUP, WAKEUP.
+
+required:
+ - compatible
+ - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+ gnss {
+ compatible = "wi2wi,w2sg0084i";
+ vcc-supply = <&gnss_vcc_reg>;
+ reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+ current-speed = <38400>;
+ };
+ };