summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml')
-rw-r--r--Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml58
1 files changed, 58 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
new file mode 100644
index 000000000..4835a280b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-blox GNSS Receiver
+
+allOf:
+ - $ref: gnss-common.yaml#
+
+maintainers:
+ - Johan Hovold <johan@kernel.org>
+
+description: >
+ The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
+
+properties:
+ compatible:
+ enum:
+ - u-blox,neo-6m
+ - u-blox,neo-8
+ - u-blox,neo-m8
+
+ reg:
+ description: >
+ The DDC Slave Address, SPI chip select address, the number of the USB hub
+ port or the USB host-controller port to which this device is attached,
+ depending on the bus used. Required for the DDC, SPI or USB busses.
+
+ vcc-supply:
+ description: >
+ Main voltage regulator
+
+ u-blox,extint-gpios:
+ maxItems: 1
+ description: >
+ GPIO connected to the "external interrupt" input pin
+
+ v-bckp-supply:
+ description: >
+ Backup voltage regulator
+
+required:
+ - compatible
+ - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial {
+ gnss {
+ compatible = "u-blox,neo-8";
+ v-bckp-supply = <&gnss_v_bckp_reg>;
+ vcc-supply = <&gnss_vcc_reg>;
+ };
+ };