summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt')
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt61
1 files changed, 61 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
new file mode 100644
index 000000000..29c4550c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt
@@ -0,0 +1,61 @@
+* Linear Technology / Analog Devices I2C bus switch
+
+Required Properties:
+
+ - compatible: Must contain one of the following.
+ "lltc,ltc4305", "lltc,ltc4306"
+ - reg: The I2C address of the device.
+
+ The following required properties are defined externally:
+
+ - Standard I2C mux properties. See i2c-mux.yaml in this directory.
+ - I2C child bus nodes. See i2c-mux.yaml in this directory.
+
+Optional Properties:
+
+ - enable-gpios: Reference to the GPIO connected to the enable input.
+ - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
+ children in idle state. This is necessary for example, if there are several
+ multiplexers on the bus and the devices behind them use same I2C addresses.
+ - gpio-controller: Marks the device node as a GPIO Controller.
+ - #gpio-cells: Should be two. The first cell is the pin number and
+ the second cell is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+ - ltc,downstream-accelerators-enable: Enables the rise time accelerators
+ on the downstream port.
+ - ltc,upstream-accelerators-enable: Enables the rise time accelerators
+ on the upstream port.
+
+Example:
+
+ ltc4306: i2c-mux@4a {
+ compatible = "lltc,ltc4306";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x4a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ };
+ };